You are not logged in.

Pages: 1

#1 2011-10-09 00:43:55

wbendick
Member
Registered: 2011-10-09
Posts: 7

[SOLVED] 3TB usb disk

I'm having some trouble getting a 3TB usb disk mounted. It's this one specifically: http://www.amazon.com/Hitachi-Touro-Ext … 24&sr=1-11

dmesg after booting with disk plugged in:

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.0-ARCH (tobias@T-POWA-LX) (gcc version 4.6.1 20110819 (prerelease) (GCC) ) #1 SMP PREEMPT Tue Aug 30 08:53:25 CEST 2011
[    0.000000] Command line: root=/dev/disk/by-uuid/9649f92a-7281-4f46-9509-2f17e8f48302 ro
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009e800 (usable)
[    0.000000]  BIOS-e820: 000000000009e800 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved)
[    0.000000]  BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 00000000bb27c000 (usable)
[    0.000000]  BIOS-e820: 00000000bb27c000 - 00000000bb282000 (reserved)
[    0.000000]  BIOS-e820: 00000000bb282000 - 00000000bb35f000 (usable)
[    0.000000]  BIOS-e820: 00000000bb35f000 - 00000000bb371000 (reserved)
[    0.000000]  BIOS-e820: 00000000bb371000 - 00000000bb3f2000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000bb3f2000 - 00000000bb40f000 (reserved)
[    0.000000]  BIOS-e820: 00000000bb40f000 - 00000000bb46f000 (usable)
[    0.000000]  BIOS-e820: 00000000bb46f000 - 00000000bb668000 (reserved)
[    0.000000]  BIOS-e820: 00000000bb668000 - 00000000bb6e8000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000bb6e8000 - 00000000bb70f000 (reserved)
[    0.000000]  BIOS-e820: 00000000bb70f000 - 00000000bb717000 (usable)
[    0.000000]  BIOS-e820: 00000000bb717000 - 00000000bb71f000 (reserved)
[    0.000000]  BIOS-e820: 00000000bb71f000 - 00000000bb76c000 (usable)
[    0.000000]  BIOS-e820: 00000000bb76c000 - 00000000bb778000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000bb778000 - 00000000bb77b000 (ACPI data)
[    0.000000]  BIOS-e820: 00000000bb77b000 - 00000000bb78b000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000bb78b000 - 00000000bb78c000 (ACPI data)
[    0.000000]  BIOS-e820: 00000000bb78c000 - 00000000bb79f000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000bb79f000 - 00000000bb7ff000 (ACPI data)
[    0.000000]  BIOS-e820: 00000000bb7ff000 - 00000000bb800000 (usable)
[    0.000000]  BIOS-e820: 00000000bb800000 - 00000000c0000000 (reserved)
[    0.000000]  BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[    0.000000]  BIOS-e820: 00000000feaff000 - 00000000feb00000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
[    0.000000]  BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[    0.000000]  BIOS-e820: 0000000100000000 - 00000001fc000000 (usable)
[    0.000000]  BIOS-e820: 0000000200000000 - 000000023c000000 (usable)
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] DMI present.
[    0.000000] DMI: LENOVO 431328U/431328U, BIOS 6MET81WW (1.41 ) 10/26/2010
[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[    0.000000] No AGP bridge found
[    0.000000] last_pfn = 0x23c000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-D3FFF write-protect
[    0.000000]   D4000-DBFFF uncachable
[    0.000000]   DC000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 disabled
[    0.000000]   1 base 000000000 mask F80000000 write-back
[    0.000000]   2 base 080000000 mask FC0000000 write-back
[    0.000000]   3 base 100000000 mask F00000000 write-back
[    0.000000]   4 base 200000000 mask FC0000000 write-back
[    0.000000]   5 base 23C000000 mask FFC000000 uncachable
[    0.000000]   6 base 0BC000000 mask FFC000000 uncachable
[    0.000000]   7 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] e820 update range: 00000000bc000000 - 0000000100000000 (usable) ==> (reserved)
[    0.000000] last_pfn = 0xbb800 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [ffff8800000f68b0] f68b0
[    0.000000] initial memory mapped : 0 - 20000000
[    0.000000] Base memory trampoline at [ffff880000099000] 99000 size 20480
[    0.000000] init_memory_mapping: 0000000000000000-00000000bb800000
[    0.000000]  0000000000 - 00bb800000 page 2M
[    0.000000] kernel direct mapping tables up to bb800000 @ bb768000-bb76c000
[    0.000000] init_memory_mapping: 0000000100000000-000000023c000000
[    0.000000]  0100000000 - 023c000000 page 2M
[    0.000000] kernel direct mapping tables up to 23c000000 @ 23bff6000-23c000000
[    0.000000] RAMDISK: 37dd9000 - 37ff0000
[    0.000000] ACPI: RSDP 00000000000f6870 00024 (v02 LENOVO)
[    0.000000] ACPI: XSDT 00000000bb7ef320 00094 (v01 LENOVO TP-6M    00001410  LTP 00000000)
[    0.000000] ACPI: FACP 00000000bb7ef400 000F4 (v04 LENOVO TP-6M    00001410 LNVO 00000001)
[    0.000000] ACPI: DSDT 00000000bb7ef7d1 0F310 (v01 LENOVO TP-6M    00001410 MSFT 03000001)
[    0.000000] ACPI: FACS 00000000bb6e7000 00040
[    0.000000] ACPI: SSDT 00000000bb7ef5b4 0021D (v01 LENOVO TP-6M    00001410 MSFT 03000001)
[    0.000000] ACPI: ECDT 00000000bb7feae1 00052 (v01 LENOVO TP-6M    00001410 LNVO 00000001)
[    0.000000] ACPI: APIC 00000000bb7feb33 00084 (v01 LENOVO TP-6M    00001410 LNVO 00000001)
[    0.000000] ACPI: MCFG 00000000bb7febef 0003C (v01 LENOVO TP-6M    00001410 LNVO 00000001)
[    0.000000] ACPI: HPET 00000000bb7fec2b 00038 (v01 LENOVO TP-6M    00001410 LNVO 00000001)
[    0.000000] ACPI: ASF! 00000000bb7fedbe 000A4 (v16 LENOVO TP-6M    00001410 PTL  00000001)
[    0.000000] ACPI: SLIC 00000000bb7fee62 00176 (v01 LENOVO TP-6M    00001410  LTP 00000000)
[    0.000000] ACPI: BOOT 00000000bb7fefd8 00028 (v01 LENOVO TP-6M    00001410  LTP 00000001)
[    0.000000] ACPI: SSDT 00000000bb6e591a 0084B (v01 LENOVO TP-6M    00001410 INTL 20050513)
[    0.000000] ACPI: TCPA 00000000bb78b000 00032 (v02    PTL  CRESTLN 06040000      00005A52)
[    0.000000] ACPI: SSDT 00000000bb77a000 009F1 (v01  PmRef    CpuPm 00003000 INTL 20060912)
[    0.000000] ACPI: SSDT 00000000bb779000 00259 (v01  PmRef  Cpu0Tst 00003000 INTL 20060912)
[    0.000000] ACPI: SSDT 00000000bb778000 0049F (v01  PmRef    ApTst 00003000 INTL 20060912)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at 0000000000000000-000000023c000000
[    0.000000] Initmem setup node 0 0000000000000000-000000023c000000
[    0.000000]   NODE_DATA [000000023bffb000 - 000000023bffffff]
[    0.000000]  [ffffea0000000000-ffffea0007dfffff] PMD -> [ffff880233600000-ffff88023a5fffff] on node 0
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   DMA32    0x00001000 -> 0x00100000
[    0.000000]   Normal   0x00100000 -> 0x0023c000
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[9] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009e
[    0.000000]     0: 0x00000100 -> 0x000bb27c
[    0.000000]     0: 0x000bb282 -> 0x000bb35f
[    0.000000]     0: 0x000bb40f -> 0x000bb46f
[    0.000000]     0: 0x000bb70f -> 0x000bb717
[    0.000000]     0: 0x000bb71f -> 0x000bb76c
[    0.000000]     0: 0x000bb7ff -> 0x000bb800
[    0.000000]     0: 0x00100000 -> 0x001fc000
[    0.000000]     0: 0x00200000 -> 0x0023c000
[    0.000000] On node 0 totalpages: 2044829
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 5 pages reserved
[    0.000000]   DMA zone: 3921 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 14280 pages used for memmap
[    0.000000]   DMA32 zone: 748615 pages, LIFO batch:31
[    0.000000]   Normal zone: 17696 pages used for memmap
[    0.000000]   Normal zone: 1260256 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x1008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x05] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000
[    0.000000] PM: Registered nosave memory: 00000000000d2000 - 00000000000d4000
[    0.000000] PM: Registered nosave memory: 00000000000d4000 - 00000000000dc000
[    0.000000] PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
[    0.000000] PM: Registered nosave memory: 00000000bb27c000 - 00000000bb282000
[    0.000000] PM: Registered nosave memory: 00000000bb35f000 - 00000000bb371000
[    0.000000] PM: Registered nosave memory: 00000000bb371000 - 00000000bb3f2000
[    0.000000] PM: Registered nosave memory: 00000000bb3f2000 - 00000000bb40f000
[    0.000000] PM: Registered nosave memory: 00000000bb46f000 - 00000000bb668000
[    0.000000] PM: Registered nosave memory: 00000000bb668000 - 00000000bb6e8000
[    0.000000] PM: Registered nosave memory: 00000000bb6e8000 - 00000000bb70f000
[    0.000000] PM: Registered nosave memory: 00000000bb717000 - 00000000bb71f000
[    0.000000] PM: Registered nosave memory: 00000000bb76c000 - 00000000bb778000
[    0.000000] PM: Registered nosave memory: 00000000bb778000 - 00000000bb77b000
[    0.000000] PM: Registered nosave memory: 00000000bb77b000 - 00000000bb78b000
[    0.000000] PM: Registered nosave memory: 00000000bb78b000 - 00000000bb78c000
[    0.000000] PM: Registered nosave memory: 00000000bb78c000 - 00000000bb79f000
[    0.000000] PM: Registered nosave memory: 00000000bb79f000 - 00000000bb7ff000
[    0.000000] PM: Registered nosave memory: 00000000bb800000 - 00000000c0000000
[    0.000000] PM: Registered nosave memory: 00000000c0000000 - 00000000e0000000
[    0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
[    0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000feaff000
[    0.000000] PM: Registered nosave memory: 00000000feaff000 - 00000000feb00000
[    0.000000] PM: Registered nosave memory: 00000000feb00000 - 00000000fec00000
[    0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec10000
[    0.000000] PM: Registered nosave memory: 00000000fec10000 - 00000000fed00000
[    0.000000] PM: Registered nosave memory: 00000000fed00000 - 00000000fed1c000
[    0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed90000
[    0.000000] PM: Registered nosave memory: 00000000fed90000 - 00000000fee00000
[    0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[    0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ff000000
[    0.000000] PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
[    0.000000] PM: Registered nosave memory: 00000001fc000000 - 0000000200000000
[    0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:20000000)
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] PERCPU: Embedded 27 pages/cpu @ffff88023bc00000 s78464 r8192 d23936 u524288
[    0.000000] pcpu-alloc: s78464 r8192 d23936 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 2012792
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: root=/dev/disk/by-uuid/9649f92a-7281-4f46-9509-2f17e8f48302 ro
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 7986280k/9371648k available (4065k kernel code, 1192332k absent, 193036k reserved, 3303k data, 712k init)
[    0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] 	Verbose stalled-CPUs detection is disabled.
[    0.000000] NR_IRQS:2304
[    0.000000] Extended CMOS year: 2000
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] allocated 67108864 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] hpet clockevent registered
[    0.000000] Fast TSC calibration using PIT
[    0.003333] Detected 2394.078 MHz processor.
[    0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 4790.66 BogoMIPS (lpj=7980260)
[    0.000006] pid_max: default: 32768 minimum: 301
[    0.000096] Security Framework initialized
[    0.000100] AppArmor: AppArmor disabled by boot time parameter
[    0.000745] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.002681] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.003504] Mount-cache hash table entries: 256
[    0.003851] Initializing cgroup subsys cpuacct
[    0.003878] Initializing cgroup subsys memory
[    0.003891] Initializing cgroup subsys devices
[    0.003893] Initializing cgroup subsys freezer
[    0.003895] Initializing cgroup subsys net_cls
[    0.003897] Initializing cgroup subsys blkio
[    0.003938] CPU: Physical Processor ID: 0
[    0.003940] CPU: Processor Core ID: 0
[    0.003945] mce: CPU supports 9 MCE banks
[    0.003956] CPU0: Thermal monitoring enabled (TM1)
[    0.003963] using mwait in idle threads.
[    0.004833] ACPI: Core revision 20110413
[    0.019652] ftrace: allocating 16145 entries in 64 pages
[    0.024693] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.057642] CPU0: Intel(R) Core(TM) i5 CPU       M 520  @ 2.40GHz stepping 05
[    0.163370] Performance Events: PEBS fmt1+, Westmere events, Intel PMU driver.
[    0.163377] ... version:                3
[    0.163378] ... bit width:              48
[    0.163379] ... generic registers:      4
[    0.163380] ... value mask:             0000ffffffffffff
[    0.163381] ... max period:             000000007fffffff
[    0.163382] ... fixed-purpose events:   3
[    0.163383] ... event mask:             000000070000000f
[    0.183432] NMI watchdog enabled, takes one hw-pmu counter.
[    0.209975] Booting Node   0, Processors  #1
[    0.209980] smpboot cpu 1: start_ip = 99000
[    0.323187] NMI watchdog enabled, takes one hw-pmu counter.
[    0.343101]  #2
[    0.343104] smpboot cpu 2: start_ip = 99000
[    0.456338] NMI watchdog enabled, takes one hw-pmu counter.
[    0.476196]  #3 Ok.
[    0.476199] smpboot cpu 3: start_ip = 99000
[    0.589430] NMI watchdog enabled, takes one hw-pmu counter.
[    0.595961] Brought up 4 CPUs
[    0.595965] Total of 4 processors activated (19159.07 BogoMIPS).
[    0.598276] devtmpfs: initialized
[    0.599341] PM: Registering ACPI NVS region at bb371000 (528384 bytes)
[    0.599352] PM: Registering ACPI NVS region at bb668000 (524288 bytes)
[    0.599360] PM: Registering ACPI NVS region at bb76c000 (49152 bytes)
[    0.599362] PM: Registering ACPI NVS region at bb77b000 (65536 bytes)
[    0.599365] PM: Registering ACPI NVS region at bb78c000 (77824 bytes)
[    0.600113] print_constraints: dummy: 
[    0.600180] NET: Registered protocol family 16
[    0.600273] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.600276] ACPI: bus type pci registered
[    0.600394] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.600397] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.662395] PCI: Using configuration type 1 for base access
[    0.662868] bio: create slab <bio-0> at 0
[    0.664332] ACPI: EC: EC description table is found, configuring boot EC
[    0.668251] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    0.749907] ACPI: SSDT 00000000bb71aa18 0046F (v01  PmRef  Cpu0Ist 00003000 INTL 20060912)
[    0.750230] ACPI: Dynamic OEM Table Load:
[    0.750232] ACPI: SSDT           (null) 0046F (v01  PmRef  Cpu0Ist 00003000 INTL 20060912)
[    0.750344] ACPI: SSDT 00000000bb718718 006B2 (v01  PmRef  Cpu0Cst 00003001 INTL 20060912)
[    0.750676] ACPI: Dynamic OEM Table Load:
[    0.750678] ACPI: SSDT           (null) 006B2 (v01  PmRef  Cpu0Cst 00003001 INTL 20060912)
[    0.775970] ACPI: SSDT 00000000bb719a98 00303 (v01  PmRef    ApIst 00003000 INTL 20060912)
[    0.776330] ACPI: Dynamic OEM Table Load:
[    0.776332] ACPI: SSDT           (null) 00303 (v01  PmRef    ApIst 00003000 INTL 20060912)
[    0.785842] ACPI: SSDT 00000000bb717d98 00119 (v01  PmRef    ApCst 00003000 INTL 20060912)
[    0.786173] ACPI: Dynamic OEM Table Load:
[    0.786175] ACPI: SSDT           (null) 00119 (v01  PmRef    ApCst 00003000 INTL 20060912)
[    0.797198] ACPI: Interpreter enabled
[    0.797202] ACPI: (supports S0 S3 S4 S5)
[    0.797218] ACPI: Using IOAPIC for interrupt routing
[    0.802056] ACPI: Power Resource [PUBS] (on)
[    0.805862] ACPI: EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62
[    0.806705] ACPI: ACPI Dock Station Driver: 2 docks/bays found
[    0.806707] HEST: Table not found.
[    0.806710] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.806721] ACPI: PCI Root Bridge [UNCR] (domain 0000 [bus ff])
[    0.806758] pci 0000:ff:00.0: [8086:2c62] type 0 class 0x000600
[    0.806779] pci 0000:ff:00.1: [8086:2d01] type 0 class 0x000600
[    0.806796] pci 0000:ff:02.0: [8086:2d10] type 0 class 0x000600
[    0.806810] pci 0000:ff:02.1: [8086:2d11] type 0 class 0x000600
[    0.806825] pci 0000:ff:02.2: [8086:2d12] type 0 class 0x000600
[    0.806839] pci 0000:ff:02.3: [8086:2d13] type 0 class 0x000600
[    0.806869]  pci0000:ff: Requesting ACPI _OSC control (0x1d)
[    0.806871]  pci0000:ff: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[    0.806873] ACPI _OSC control for PCIe not granted, disabling ASPM
[    0.807106] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[    0.807155] pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7]
[    0.807157] pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff]
[    0.807159] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[    0.807161] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff]
[    0.807163] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
[    0.807165] pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xfebfffff]
[    0.807173] pci 0000:00:00.0: [8086:0044] type 0 class 0x000600
[    0.807187] DMAR: BIOS has allocated no shadow GTT; disabling IOMMU for graphics
[    0.807202] pci 0000:00:02.0: [8086:0046] type 0 class 0x000300
[    0.807212] pci 0000:00:02.0: reg 10: [mem 0xf2000000-0xf23fffff 64bit]
[    0.807218] pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.807222] pci 0000:00:02.0: reg 20: [io  0x1800-0x1807]
[    0.807280] pci 0000:00:16.0: [8086:3b64] type 0 class 0x000780
[    0.807307] pci 0000:00:16.0: reg 10: [mem 0xf2827800-0xf282780f 64bit]
[    0.807385] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.807390] pci 0000:00:16.0: PME# disabled
[    0.807417] pci 0000:00:16.3: [8086:3b67] type 0 class 0x000700
[    0.807438] pci 0000:00:16.3: reg 10: [io  0x1808-0x180f]
[    0.807449] pci 0000:00:16.3: reg 14: [mem 0xf2624000-0xf2624fff]
[    0.807558] pci 0000:00:19.0: [8086:10ea] type 0 class 0x000200
[    0.807583] pci 0000:00:19.0: reg 10: [mem 0xf2600000-0xf261ffff]
[    0.807594] pci 0000:00:19.0: reg 14: [mem 0xf2625000-0xf2625fff]
[    0.807604] pci 0000:00:19.0: reg 18: [io  0x1820-0x183f]
[    0.807668] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[    0.807673] pci 0000:00:19.0: PME# disabled
[    0.807701] pci 0000:00:1a.0: [8086:3b3c] type 0 class 0x000c03
[    0.807725] pci 0000:00:1a.0: reg 10: [mem 0xf2828000-0xf28283ff]
[    0.807812] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.807817] pci 0000:00:1a.0: PME# disabled
[    0.807845] pci 0000:00:1b.0: [8086:3b56] type 0 class 0x000403
[    0.807865] pci 0000:00:1b.0: reg 10: [mem 0xf2620000-0xf2623fff 64bit]
[    0.807940] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.807945] pci 0000:00:1b.0: PME# disabled
[    0.807971] pci 0000:00:1c.0: [8086:3b42] type 1 class 0x000604
[    0.808047] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.808052] pci 0000:00:1c.0: PME# disabled
[    0.808078] pci 0000:00:1c.1: [8086:3b44] type 1 class 0x000604
[    0.808156] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.808160] pci 0000:00:1c.1: PME# disabled
[    0.808187] pci 0000:00:1c.3: [8086:3b48] type 1 class 0x000604
[    0.808264] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.808268] pci 0000:00:1c.3: PME# disabled
[    0.808297] pci 0000:00:1c.4: [8086:3b4a] type 1 class 0x000604
[    0.808375] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[    0.808380] pci 0000:00:1c.4: PME# disabled
[    0.808416] pci 0000:00:1d.0: [8086:3b34] type 0 class 0x000c03
[    0.808440] pci 0000:00:1d.0: reg 10: [mem 0xf2828400-0xf28287ff]
[    0.808526] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.808531] pci 0000:00:1d.0: PME# disabled
[    0.808554] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
[    0.808627] pci 0000:00:1f.0: [8086:3b07] type 0 class 0x000601
[    0.808745] pci 0000:00:1f.2: [8086:3b2f] type 0 class 0x000106
[    0.808770] pci 0000:00:1f.2: reg 10: [io  0x1860-0x1867]
[    0.808782] pci 0000:00:1f.2: reg 14: [io  0x1814-0x1817]
[    0.808792] pci 0000:00:1f.2: reg 18: [io  0x1818-0x181f]
[    0.808803] pci 0000:00:1f.2: reg 1c: [io  0x1810-0x1813]
[    0.808813] pci 0000:00:1f.2: reg 20: [io  0x1840-0x185f]
[    0.808824] pci 0000:00:1f.2: reg 24: [mem 0xf2827000-0xf28277ff]
[    0.808870] pci 0000:00:1f.2: PME# supported from D3hot
[    0.808874] pci 0000:00:1f.2: PME# disabled
[    0.808895] pci 0000:00:1f.3: [8086:3b30] type 0 class 0x000c05
[    0.808916] pci 0000:00:1f.3: reg 10: [mem 0xf2828800-0xf28288ff 64bit]
[    0.808945] pci 0000:00:1f.3: reg 20: [io  0x1880-0x189f]
[    0.808990] pci 0000:00:1f.6: [8086:3b32] type 0 class 0x001180
[    0.809017] pci 0000:00:1f.6: reg 10: [mem 0xf2626000-0xf2626fff 64bit]
[    0.809155] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[    0.809160] pci 0000:00:1c.0:   bridge window [io  0xf000-0x0000] (disabled)
[    0.809165] pci 0000:00:1c.0:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
[    0.809172] pci 0000:00:1c.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[    0.809243] pci 0000:03:00.0: [10ec:8172] type 0 class 0x000280
[    0.809259] pci 0000:03:00.0: reg 10: [io  0x2000-0x20ff]
[    0.809271] pci 0000:03:00.0: reg 14: [mem 0xf2400000-0xf2403fff]
[    0.809351] pci 0000:03:00.0: supports D1 D2
[    0.809353] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot
[    0.809357] pci 0000:03:00.0: PME# disabled
[    0.809389] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[    0.809393] pci 0000:00:1c.1:   bridge window [io  0x2000-0x2fff]
[    0.809398] pci 0000:00:1c.1:   bridge window [mem 0xf2400000-0xf24fffff]
[    0.809405] pci 0000:00:1c.1:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[    0.809460] pci 0000:00:1c.3: PCI bridge to [bus 05-0c]
[    0.809464] pci 0000:00:1c.3:   bridge window [io  0x3000-0x3fff]
[    0.809468] pci 0000:00:1c.3:   bridge window [mem 0xf0000000-0xf1ffffff]
[    0.809476] pci 0000:00:1c.3:   bridge window [mem 0xf2900000-0xf29fffff 64bit pref]
[    0.809600] pci 0000:0d:00.0: [1180:e822] type 0 class 0x000805
[    0.809623] pci 0000:0d:00.0: reg 10: [mem 0xf2500000-0xf25000ff]
[    0.809757] pci 0000:0d:00.0: supports D1 D2
[    0.809759] pci 0000:0d:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.809765] pci 0000:0d:00.0: PME# disabled
[    0.809815] pci 0000:0d:00.1: [1180:e230] type 0 class 0x000880
[    0.809838] pci 0000:0d:00.1: reg 10: [mem 0xf2500400-0xf25004ff]
[    0.809972] pci 0000:0d:00.1: supports D1 D2
[    0.809974] pci 0000:0d:00.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.809979] pci 0000:0d:00.1: PME# disabled
[    0.810026] pci 0000:0d:00.3: [1180:e832] type 0 class 0x000c00
[    0.810048] pci 0000:0d:00.3: reg 10: [mem 0xf2500800-0xf2500fff]
[    0.810182] pci 0000:0d:00.3: supports D1 D2
[    0.810183] pci 0000:0d:00.3: PME# supported from D0 D1 D2 D3hot D3cold
[    0.810189] pci 0000:0d:00.3: PME# disabled
[    0.810255] pci 0000:00:1c.4: PCI bridge to [bus 0d-0d]
[    0.810260] pci 0000:00:1c.4:   bridge window [io  0xf000-0x0000] (disabled)
[    0.810265] pci 0000:00:1c.4:   bridge window [mem 0xf2500000-0xf25fffff]
[    0.810272] pci 0000:00:1c.4:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[    0.810343] pci 0000:00:1e.0: PCI bridge to [bus 0e-0e] (subtractive decode)
[    0.810347] pci 0000:00:1e.0:   bridge window [io  0xf000-0x0000] (disabled)
[    0.810352] pci 0000:00:1e.0:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
[    0.810359] pci 0000:00:1e.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[    0.810361] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
[    0.810363] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
[    0.810365] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    0.810367] pci 0000:00:1e.0:   bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
[    0.810369] pci 0000:00:1e.0:   bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
[    0.810371] pci 0000:00:1e.0:   bridge window [mem 0xc0000000-0xfebfffff] (subtractive decode)
[    0.810402] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.810477] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
[    0.810498] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT]
[    0.810519] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP4._PRT]
[    0.810540] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP5._PRT]
[    0.810643]  pci0000:00: Requesting ACPI _OSC control (0x1d)
[    0.810773]  pci0000:00: ACPI _OSC request failed (AE_SUPPORT), returned control mask: 0x0d
[    0.810774] ACPI _OSC control for PCIe not granted, disabling ASPM
[    0.813113] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
[    0.813163] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
[    0.813203] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
[    0.813251] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
[    0.813298] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
[    0.813345] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11)
[    0.813385] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
[    0.813432] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11)
[    0.813517] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.813524] vgaarb: loaded
[    0.813525] vgaarb: bridge control possible 0000:00:02.0
[    0.813585] PCI: Using ACPI for IRQ routing
[    0.823404] PCI: pci_cache_line_size set to 64 bytes
[    0.823493] reserve RAM buffer: 000000000009e800 - 000000000009ffff 
[    0.823495] reserve RAM buffer: 00000000bb27c000 - 00000000bbffffff 
[    0.823499] reserve RAM buffer: 00000000bb35f000 - 00000000bbffffff 
[    0.823502] reserve RAM buffer: 00000000bb46f000 - 00000000bbffffff 
[    0.823505] reserve RAM buffer: 00000000bb717000 - 00000000bbffffff 
[    0.823508] reserve RAM buffer: 00000000bb76c000 - 00000000bbffffff 
[    0.823510] reserve RAM buffer: 00000000bb800000 - 00000000bbffffff 
[    0.823621] NetLabel: Initializing
[    0.823622] NetLabel:  domain hash size = 128
[    0.823623] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.823635] NetLabel:  unlabeled traffic allowed by default
[    0.823655] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.823660] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.825675] Switching to clocksource hpet
[    0.828905] Switched to NOHz mode on CPU #0
[    0.828971] Switched to NOHz mode on CPU #1
[    0.829016] Switched to NOHz mode on CPU #3
[    0.829018] Switched to NOHz mode on CPU #2
[    0.830701] pnp: PnP ACPI init
[    0.830717] ACPI: bus type pnp registered
[    0.832062] pnp 00:00: [mem 0x00000000-0x0009ffff]
[    0.832064] pnp 00:00: [mem 0x000c0000-0x000c3fff]
[    0.832066] pnp 00:00: [mem 0x000c4000-0x000c7fff]
[    0.832067] pnp 00:00: [mem 0x000c8000-0x000cbfff]
[    0.832068] pnp 00:00: [mem 0x000cc000-0x000cffff]
[    0.832070] pnp 00:00: [mem 0x000d0000-0x000d3fff]
[    0.832071] pnp 00:00: [mem 0x000d4000-0x000d3fff disabled]
[    0.832073] pnp 00:00: [mem 0x000d8000-0x000d7fff disabled]
[    0.832074] pnp 00:00: [mem 0x000dc000-0x000dffff]
[    0.832076] pnp 00:00: [mem 0x000e0000-0x000e3fff]
[    0.832077] pnp 00:00: [mem 0x000e4000-0x000e7fff]
[    0.832079] pnp 00:00: [mem 0x000e8000-0x000ebfff]
[    0.832080] pnp 00:00: [mem 0x000ec000-0x000effff]
[    0.832081] pnp 00:00: [mem 0x000f0000-0x000fffff]
[    0.832083] pnp 00:00: [mem 0x00100000-0xbfffffff]
[    0.832084] pnp 00:00: [mem 0xfec00000-0xfed3ffff]
[    0.832086] pnp 00:00: [mem 0xfed4c000-0xffffffff]
[    0.832150] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.832152] system 00:00: [mem 0x000c0000-0x000c3fff] could not be reserved
[    0.832154] system 00:00: [mem 0x000c4000-0x000c7fff] could not be reserved
[    0.832157] system 00:00: [mem 0x000c8000-0x000cbfff] has been reserved
[    0.832158] system 00:00: [mem 0x000cc000-0x000cffff] has been reserved
[    0.832160] system 00:00: [mem 0x000d0000-0x000d3fff] could not be reserved
[    0.832163] system 00:00: [mem 0x000dc000-0x000dffff] could not be reserved
[    0.832165] system 00:00: [mem 0x000e0000-0x000e3fff] could not be reserved
[    0.832167] system 00:00: [mem 0x000e4000-0x000e7fff] could not be reserved
[    0.832169] system 00:00: [mem 0x000e8000-0x000ebfff] could not be reserved
[    0.832171] system 00:00: [mem 0x000ec000-0x000effff] could not be reserved
[    0.832173] system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved
[    0.832175] system 00:00: [mem 0x00100000-0xbfffffff] could not be reserved
[    0.832178] system 00:00: [mem 0xfec00000-0xfed3ffff] could not be reserved
[    0.832180] system 00:00: [mem 0xfed4c000-0xffffffff] could not be reserved
[    0.832183] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.832194] pnp 00:01: [bus ff]
[    0.832253] pnp 00:01: Plug and Play ACPI device, IDs PNP0a03 (active)
[    0.832267] pnp 00:02: [bus 00-fe]
[    0.832271] pnp 00:02: [io  0x0cf8-0x0cff]
[    0.832272] pnp 00:02: [io  0x0000-0x0cf7 window]
[    0.832274] pnp 00:02: [io  0x0d00-0xffff window]
[    0.832275] pnp 00:02: [mem 0x000a0000-0x000bffff window]
[    0.832277] pnp 00:02: [mem 0x000c0000-0x000c3fff window]
[    0.832279] pnp 00:02: [mem 0x000c4000-0x000c7fff window]
[    0.832280] pnp 00:02: [mem 0x000c8000-0x000cbfff window]
[    0.832282] pnp 00:02: [mem 0x000cc000-0x000cffff window]
[    0.832283] pnp 00:02: [mem 0x000d0000-0x000d3fff window]
[    0.832285] pnp 00:02: [mem 0x000d4000-0x000d7fff window]
[    0.832286] pnp 00:02: [mem 0x000d8000-0x000dbfff window]
[    0.832288] pnp 00:02: [mem 0x000dc000-0x000dffff window]
[    0.832289] pnp 00:02: [mem 0x000e0000-0x000e3fff window]
[    0.832291] pnp 00:02: [mem 0x000e4000-0x000e7fff window]
[    0.832292] pnp 00:02: [mem 0x000e8000-0x000ebfff window]
[    0.832294] pnp 00:02: [mem 0x000ec000-0x000effff window]
[    0.832295] pnp 00:02: [mem 0xc0000000-0xfebfffff window]
[    0.832297] pnp 00:02: [mem 0xfed40000-0xfed4bfff window]
[    0.832326] pnp 00:02: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[    0.832592] pnp 00:03: [io  0x0010-0x001f]
[    0.832594] pnp 00:03: [io  0x0090-0x009f]
[    0.832595] pnp 00:03: [io  0x0024-0x0025]
[    0.832596] pnp 00:03: [io  0x0028-0x0029]
[    0.832598] pnp 00:03: [io  0x002c-0x002d]
[    0.832599] pnp 00:03: [io  0x0030-0x0031]
[    0.832600] pnp 00:03: [io  0x0034-0x0035]
[    0.832602] pnp 00:03: [io  0x0038-0x0039]
[    0.832603] pnp 00:03: [io  0x003c-0x003d]
[    0.832604] pnp 00:03: [io  0x00a4-0x00a5]
[    0.832605] pnp 00:03: [io  0x00a8-0x00a9]
[    0.832607] pnp 00:03: [io  0x00ac-0x00ad]
[    0.832608] pnp 00:03: [io  0x00b0-0x00b5]
[    0.832609] pnp 00:03: [io  0x00b8-0x00b9]
[    0.832610] pnp 00:03: [io  0x00bc-0x00bd]
[    0.832612] pnp 00:03: [io  0x0050-0x0053]
[    0.832613] pnp 00:03: [io  0x0072-0x0077]
[    0.832614] pnp 00:03: [io  0x164e-0x164f]
[    0.832616] pnp 00:03: [io  0x002e-0x002f]
[    0.832617] pnp 00:03: [io  0x1000-0x107f]
[    0.832618] pnp 00:03: [io  0x1180-0x11ff]
[    0.832619] pnp 00:03: [io  0x0800-0x080f]
[    0.832621] pnp 00:03: [io  0x15e0-0x15ef]
[    0.832622] pnp 00:03: [io  0x1600-0x1641]
[    0.832625] pnp 00:03: [io  0x1644-0x167f]
[    0.832627] pnp 00:03: [mem 0xe0000000-0xefffffff]
[    0.832628] pnp 00:03: [mem 0xfeaff000-0xfeafffff]
[    0.832629] pnp 00:03: [mem 0xfed1c000-0xfed1ffff]
[    0.832631] pnp 00:03: [mem 0xfed10000-0xfed13fff]
[    0.832632] pnp 00:03: [mem 0xfed18000-0xfed18fff]
[    0.832634] pnp 00:03: [mem 0xfed19000-0xfed19fff]
[    0.832635] pnp 00:03: [mem 0xfed45000-0xfed4bfff]
[    0.832694] system 00:03: [io  0x164e-0x164f] has been reserved
[    0.832696] system 00:03: [io  0x1000-0x107f] has been reserved
[    0.832697] system 00:03: [io  0x1180-0x11ff] has been reserved
[    0.832701] system 00:03: [io  0x0800-0x080f] has been reserved
[    0.832703] system 00:03: [io  0x15e0-0x15ef] has been reserved
[    0.832704] system 00:03: [io  0x1600-0x1641] has been reserved
[    0.832706] system 00:03: [io  0x1644-0x167f] could not be reserved
[    0.832709] system 00:03: [mem 0xe0000000-0xefffffff] has been reserved
[    0.832711] system 00:03: [mem 0xfeaff000-0xfeafffff] has been reserved
[    0.832713] system 00:03: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.832715] system 00:03: [mem 0xfed10000-0xfed13fff] has been reserved
[    0.832717] system 00:03: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.832719] system 00:03: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.832721] system 00:03: [mem 0xfed45000-0xfed4bfff] has been reserved
[    0.832724] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.832750] pnp 00:04: [mem 0xfed00000-0xfed003ff]
[    0.832772] pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active)
[    0.832779] pnp 00:05: [io  0x0000-0x000f]
[    0.832780] pnp 00:05: [io  0x0080-0x008f]
[    0.832781] pnp 00:05: [io  0x00c0-0x00df]
[    0.832783] pnp 00:05: [dma 4]
[    0.832803] pnp 00:05: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.832809] pnp 00:06: [io  0x0061]
[    0.832834] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
[    0.832841] pnp 00:07: [io  0x00f0]
[    0.832850] pnp 00:07: [irq 13]
[    0.832871] pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.832877] pnp 00:08: [io  0x0070-0x0071]
[    0.832882] pnp 00:08: [irq 8]
[    0.832902] pnp 00:08: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.832909] pnp 00:09: [io  0x0060]
[    0.832910] pnp 00:09: [io  0x0064]
[    0.832914] pnp 00:09: [irq 1]
[    0.832937] pnp 00:09: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.832946] pnp 00:0a: [irq 12]
[    0.832968] pnp 00:0a: Plug and Play ACPI device, IDs LEN0015 PNP0f13 (active)
[    0.833236] pnp 00:0b: [mem 0xfed40000-0xfed44fff]
[    0.833261] pnp 00:0b: Plug and Play ACPI device, IDs SMO1200 PNP0c31 (active)
[    0.834109] pnp: PnP ACPI: found 12 devices
[    0.834111] ACPI: ACPI bus type pnp unregistered
[    0.839805] PCI: max bus depth: 1 pci_try_num: 2
[    0.839855] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[    0.839857] pci 0000:00:1c.0:   bridge window [io  disabled]
[    0.839863] pci 0000:00:1c.0:   bridge window [mem disabled]
[    0.839867] pci 0000:00:1c.0:   bridge window [mem pref disabled]
[    0.839875] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[    0.839878] pci 0000:00:1c.1:   bridge window [io  0x2000-0x2fff]
[    0.839884] pci 0000:00:1c.1:   bridge window [mem 0xf2400000-0xf24fffff]
[    0.839888] pci 0000:00:1c.1:   bridge window [mem pref disabled]
[    0.839896] pci 0000:00:1c.3: PCI bridge to [bus 05-0c]
[    0.839899] pci 0000:00:1c.3:   bridge window [io  0x3000-0x3fff]
[    0.839905] pci 0000:00:1c.3:   bridge window [mem 0xf0000000-0xf1ffffff]
[    0.839910] pci 0000:00:1c.3:   bridge window [mem 0xf2900000-0xf29fffff 64bit pref]
[    0.839917] pci 0000:00:1c.4: PCI bridge to [bus 0d-0d]
[    0.839918] pci 0000:00:1c.4:   bridge window [io  disabled]
[    0.839924] pci 0000:00:1c.4:   bridge window [mem 0xf2500000-0xf25fffff]
[    0.839929] pci 0000:00:1c.4:   bridge window [mem pref disabled]
[    0.839936] pci 0000:00:1e.0: PCI bridge to [bus 0e-0e]
[    0.839937] pci 0000:00:1e.0:   bridge window [io  disabled]
[    0.839943] pci 0000:00:1e.0:   bridge window [mem disabled]
[    0.839947] pci 0000:00:1e.0:   bridge window [mem pref disabled]
[    0.839966] pci 0000:00:1c.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[    0.839972] pci 0000:00:1c.0: setting latency timer to 64
[    0.839981] pci 0000:00:1c.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[    0.839985] pci 0000:00:1c.1: setting latency timer to 64
[    0.839994] pci 0000:00:1c.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[    0.839998] pci 0000:00:1c.3: setting latency timer to 64
[    0.840006] pci 0000:00:1c.4: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[    0.840010] pci 0000:00:1c.4: setting latency timer to 64
[    0.840018] pci 0000:00:1e.0: setting latency timer to 64
[    0.840022] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.840024] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.840026] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.840028] pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff]
[    0.840029] pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff]
[    0.840031] pci_bus 0000:00: resource 9 [mem 0xc0000000-0xfebfffff]
[    0.840033] pci_bus 0000:03: resource 0 [io  0x2000-0x2fff]
[    0.840035] pci_bus 0000:03: resource 1 [mem 0xf2400000-0xf24fffff]
[    0.840037] pci_bus 0000:05: resource 0 [io  0x3000-0x3fff]
[    0.840038] pci_bus 0000:05: resource 1 [mem 0xf0000000-0xf1ffffff]
[    0.840040] pci_bus 0000:05: resource 2 [mem 0xf2900000-0xf29fffff 64bit pref]
[    0.840042] pci_bus 0000:0d: resource 1 [mem 0xf2500000-0xf25fffff]
[    0.840044] pci_bus 0000:0e: resource 4 [io  0x0000-0x0cf7]
[    0.840046] pci_bus 0000:0e: resource 5 [io  0x0d00-0xffff]
[    0.840047] pci_bus 0000:0e: resource 6 [mem 0x000a0000-0x000bffff]
[    0.840049] pci_bus 0000:0e: resource 7 [mem 0x000d4000-0x000d7fff]
[    0.840051] pci_bus 0000:0e: resource 8 [mem 0x000d8000-0x000dbfff]
[    0.840053] pci_bus 0000:0e: resource 9 [mem 0xc0000000-0xfebfffff]
[    0.840114] NET: Registered protocol family 2
[    0.840340] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.841366] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[    0.843049] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.843253] TCP: Hash tables configured (established 524288 bind 65536)
[    0.843255] TCP reno registered
[    0.843269] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    0.843303] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    0.843522] NET: Registered protocol family 1
[    0.843546] pci 0000:00:02.0: Boot video device
[    0.843663] PCI: CLS 64 bytes, default 64
[    0.843716] Unpacking initramfs...
[    0.869086] Freeing initrd memory: 2140k freed
[    0.869439] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.869441] Placing 64MB software IO TLB between ffff8800b727c000 - ffff8800bb27c000
[    0.869443] software IO TLB at phys 0xb727c000 - 0xbb27c000
[    0.869468] Simple Boot Flag at 0x35 set to 0x1
[    0.869889] audit: initializing netlink socket (disabled)
[    0.869899] type=2000 audit(1318119826.646:1): initialized
[    0.885110] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.916341] VFS: Disk quotas dquot_6.5.2
[    0.916452] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.916598] msgmni has been set to 15602
[    0.916794] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.916829] io scheduler noop registered
[    0.916831] io scheduler deadline registered
[    0.916872] io scheduler cfq registered (default)
[    0.917256] intel_idle: MWAIT substates: 0x1120
[    0.917257] intel_idle: v0.4 model 0x25
[    0.917258] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.917298] ERST: Table is not found!
[    0.917358] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    1.141987] serial 0000:00:16.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    1.162475] 0000:00:16.3: ttyS0 at I/O 0x1808 (irq = 17) is a 16550A
[    1.201921] Linux agpgart interface v0.103
[    1.201987] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[    1.206125] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.206137] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.206222] mousedev: PS/2 mouse device common for all mice
[    1.206269] rtc_cmos 00:08: RTC can wake from S4
[    1.206363] rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0
[    1.206394] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    1.206469] cpuidle: using governor ladder
[    1.206585] cpuidle: using governor menu
[    1.206817] TCP cubic registered
[    1.206822] NET: Registered protocol family 17
[    1.206832] Registering the dns_resolver key type
[    1.207058] PM: Hibernation image not present or could not be loaded.
[    1.207065] registered taskstats version 1
[    1.225418] rtc_cmos 00:08: setting system clock to 2011-10-09 00:23:47 UTC (1318119827)
[    1.225579] Initializing network drop monitor service
[    1.226373] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    1.228548] Freeing unused kernel memory: 712k freed
[    1.228686] Write protecting the kernel read-only data: 6144k
[    1.229154] Freeing unused kernel memory: 12k freed
[    1.234728] Freeing unused kernel memory: 776k freed
[    1.251324] udevd[57]: starting version 173
[    1.298728] usbcore: registered new interface driver usbfs
[    1.298763] usbcore: registered new interface driver hub
[    1.300465] usbcore: registered new device driver usb
[    1.301900] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.302380] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0
[    1.302387] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0
[    1.302399] ehci_hcd 0000:00:1a.0: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[    1.302436] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[    1.302442] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[    1.302493] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    1.302534] ehci_hcd 0000:00:1a.0: debug port 2
[    1.306527] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
[    1.306547] ehci_hcd 0000:00:1a.0: irq 23, io mem 0xf2828000
[    1.311231] SCSI subsystem initialized
[    1.318251] libata version 3.00 loaded.
[    1.318256] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    1.318666] hub 1-0:1.0: USB hub found
[    1.318673] hub 1-0:1.0: 3 ports detected
[    1.319162] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[    1.319173] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[    1.319198] ehci_hcd 0000:00:1d.0: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[    1.319254] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[    1.319263] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[    1.319285] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    1.319346] ehci_hcd 0000:00:1d.0: debug port 2
[    1.323261] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
[    1.323296] ehci_hcd 0000:00:1d.0: irq 19, io mem 0xf2828400
[    1.338327] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    1.338559] hub 2-0:1.0: USB hub found
[    1.338567] hub 2-0:1.0: 3 ports detected
[    1.338731] ahci 0000:00:1f.2: version 3.0
[    1.338751] ahci 0000:00:1f.2: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[    1.338825] ahci 0000:00:1f.2: irq 40 for MSI/MSI-X
[    1.338869] ahci: SSS flag set, parallel bus scan disabled
[    1.338918] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x33 impl SATA mode
[    1.338922] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part ems sxs apst 
[    1.338926] ahci 0000:00:1f.2: setting latency timer to 64
[    1.358819] scsi0 : ahci
[    1.358992] scsi1 : ahci
[    1.359109] scsi2 : ahci
[    1.359217] scsi3 : ahci
[    1.359324] scsi4 : ahci
[    1.359430] scsi5 : ahci
[    1.359848] ata1: SATA max UDMA/133 abar m2048@0xf2827000 port 0xf2827100 irq 40
[    1.359852] ata2: SATA max UDMA/133 abar m2048@0xf2827000 port 0xf2827180 irq 40
[    1.359853] ata3: DUMMY
[    1.359854] ata4: DUMMY
[    1.359857] ata5: SATA max UDMA/133 abar m2048@0xf2827000 port 0xf2827300 irq 40
[    1.359860] ata6: SATA max UDMA/133 abar m2048@0xf2827000 port 0xf2827380 irq 40
[    1.624451] usb 1-1: new high speed USB device number 2 using ehci_hcd
[    1.677727] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.678109] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[    1.678115] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[    1.678196] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 (SET FEATURES) succeeded
[    1.678201] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[    1.678441] ata1.00: ATA-8: TOSHIBA THNS128GG4BAAA-NonFDE, AGLA0203, max UDMA/100
[    1.678446] ata1.00: 250069680 sectors, multi 16: LBA48 
[    1.678872] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[    1.678877] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[    1.678957] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 (SET FEATURES) succeeded
[    1.678963] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[    1.679147] ata1.00: configured for UDMA/100
[    1.679430] scsi 0:0:0:0: Direct-Access     ATA      TOSHIBA THNS128G AGLA PQ: 0 ANSI: 5
[    1.748286] hub 1-1:1.0: USB hub found
[    1.748418] hub 1-1:1.0: 6 ports detected
[    1.854084] usb 2-1: new high speed USB device number 2 using ehci_hcd
[    1.870684] Refined TSC clocksource calibration: 2393.999 MHz.
[    1.870690] Switching to clocksource tsc
[    1.977850] hub 2-1:1.0: USB hub found
[    1.978023] hub 2-1:1.0: 8 ports detected
[    1.997140] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.004637] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
[    2.009712] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
[    2.011465] ata2.00: ATAPI: Optiarc DVD RW AD-7700H, 1.FA, max UDMA/100
[    2.023978] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
[    2.029026] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
[    2.030784] ata2.00: configured for UDMA/100
[    2.046953] scsi 1:0:0:0: CD-ROM            Optiarc  DVD RW AD-7700H  1.FA PQ: 0 ANSI: 5
[    2.057166] usb 1-1.1: new high speed USB device number 3 using ehci_hcd
[    2.142390] hub 1-1.1:1.0: USB hub found
[    2.142705] hub 1-1.1:1.0: 4 ports detected
[    2.210274] usb 1-1.6: new high speed USB device number 4 using ehci_hcd
[    2.366504] ata5: SATA link down (SStatus 0 SControl 300)
[    2.366598] usb 2-1.2: new high speed USB device number 3 using ehci_hcd
[    2.576516] usb 1-1.1.3: new full speed USB device number 5 using ehci_hcd
[    2.662582] hub 1-1.1.3:1.0: USB hub found
[    2.663007] hub 1-1.1.3:1.0: 4 ports detected
[    2.685969] ata6: SATA link down (SStatus 0 SControl 300)
[    2.691823] sd 0:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB)
[    2.691910] sd 0:0:0:0: [sda] Write Protect is off
[    2.691917] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.691969] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.692838]  sda: sda1 sda2 sda3 sda4
[    2.693436] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.711593] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.711600] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.711913] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    2.732865] usb 1-1.1.4: new high speed USB device number 6 using ehci_hcd
[    2.818127] hub 1-1.1.4:1.0: USB hub found
[    2.818434] hub 1-1.1.4:1.0: 4 ports detected
[    2.867912] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[    2.932641] usb 1-1.1.3.2: new full speed USB device number 7 using ehci_hcd
[    3.096270] usb 1-1.1.3.3: new low speed USB device number 8 using ehci_hcd
[    3.187980] udevd[257]: starting version 173
[    3.256032] usb 1-1.1.3.4: new low speed USB device number 9 using ehci_hcd
[    3.262511] ACPI: acpi_idle yielding to intel_idle
[    3.265377] agpgart-intel 0000:00:00.0: Intel HD Graphics Chipset
[    3.265592] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[    3.266768] agpgart-intel 0000:00:00.0: detected 32768K stolen memory
[    3.267821] mei: module is from the staging directory, the quality is unknown, you have been warned.
[    3.268729] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
[    3.268930] ACPI: Lid Switch [LID]
[    3.272468] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
[    3.272478] ACPI: Sleep Button [SLPB]
[    3.272569] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    3.272573] ACPI: Power Button [PWRF]
[    3.276465] e1000e: Intel(R) PRO/1000 Network Driver - 1.3.10-k2
[    3.276469] e1000e: Copyright(c) 1999 - 2011 Intel Corporation.
[    3.279177] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[    3.279346] mei 0000:00:16.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    3.279353] mei 0000:00:16.0: setting latency timer to 64
[    3.283637] e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[    3.283651] e1000e 0000:00:19.0: setting latency timer to 64
[    3.283813] e1000e 0000:00:19.0: irq 41 for MSI/MSI-X
[    3.287100] wmi: Mapper loaded
[    3.290949] thermal LNXTHERM:00: registered as thermal_zone0
[    3.290952] ACPI: Thermal Zone [THM0] (43 C)
[    3.294311] [drm] Initialized drm 1.1.0 20060810
[    3.296852] Non-volatile memory driver v1.3
[    3.300718] tpm_tis 00:0b: 1.2 TPM (device-id 0x0, rev-id 78)
[    3.301093] iTCO_vendor_support: vendor-support=0
[    3.306538] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[    3.306548] ACPI: Battery Slot [BAT0] (battery present)
[    3.307078] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[    3.309253] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
[    3.309400] iTCO_wdt: Found a QM57 TCO device (Version=2, TCOBASE=0x1060)
[    3.309480] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    3.311599] sdhci: Secure Digital Host Controller Interface driver
[    3.311603] sdhci: Copyright(c) Pierre Ossman
[    3.312398] sdhci-pci 0000:0d:00.0: SDHCI controller found [1180:e822] (rev 1)
[    3.312420] sdhci-pci 0000:0d:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    3.312463] sdhci-pci 0000:0d:00.0: Will use DMA mode even though HW doesn't fully claim to support it.
[    3.312472] sdhci-pci 0000:0d:00.0: setting latency timer to 64
[    3.312485] _regulator_get: 0000:0d:00.0 supply vmmc not found, using dummy regulator
[    3.312523] Registered led device: mmc0::
[    3.312576] mmc0: SDHCI controller on PCI [0000:0d:00.0] using DMA
[    3.314952] ACPI: AC Adapter [AC] (on-line)
[    3.320003] thinkpad_acpi: ThinkPad ACPI Extras v0.24
[    3.320006] thinkpad_acpi: http://ibm-acpi.sf.net/
[    3.320008] thinkpad_acpi: ThinkPad BIOS 6MET81WW (1.41 ), EC 6MHT43WW-1.18
[    3.320011] thinkpad_acpi: Lenovo ThinkPad T510, model 431328U
[    3.320139] firewire_ohci 0000:0d:00.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[    3.320148] firewire_ohci 0000:0d:00.3: setting latency timer to 64
[    3.320543] cfg80211: Calling CRDA to update world regulatory domain
[    3.321276] thinkpad_acpi: detected a 8-level brightness capable ThinkPad
[    3.321516] thinkpad_acpi: radio switch found; radios are disabled
[    3.324946] Registered led device: tpacpi::thinklight
[    3.327858] Registered led device: tpacpi::power
[    3.327876] Registered led device: tpacpi::standby
[    3.327892] Registered led device: tpacpi::thinkvantage
[    3.330506] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
[    3.330690] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
[    3.332286] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input4
[    3.334263] input: PC Speaker as /devices/platform/pcspkr/input/input5
[    3.339141] rtl8192se 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    3.339149] rtl8192se 0000:03:00.0: setting latency timer to 64
[    3.352852] rtl8192se: Driver for Realtek RTL8192SE/RTL8191SE
[    3.352854]            Loading firmware rtlwifi/rtl8192sefw.bin
[    3.353700] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    3.353748] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    3.378121] firewire_ohci 0000:0d:00.3: irq 42 for MSI/MSI-X
[    3.378232] firewire_ohci: Added fw-ohci device 0000:0d:00.3, OHCI v1.10, 4 IR + 4 IT contexts, quirks 0x1
[    3.411639] usb 1-1.1.4.1: new high speed USB device number 10 using ehci_hcd
[    3.423392] ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
[    3.468976] e1000e 0000:00:19.0: eth0: (PCI Express:2.5GT/s:Width x1) f0:de:f1:41:82:8e
[    3.468983] e1000e 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
[    3.469055] e1000e 0000:00:19.0: eth0: MAC: 9, PHY: 10, PBA No: A002FF-0FF
[    3.469125] i801_smbus 0000:00:1f.3: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    3.469297] intel ips 0000:00:1f.6: CPU TDP doesn't match expected value (found 25, expected 29)
[    3.469314] intel ips 0000:00:1f.6: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[    3.469398] intel ips 0000:00:1f.6: failed to get i915 symbols, graphics turbo disabled
[    3.469617] intel ips 0000:00:1f.6: IPS driver initialized, MCP temp limit 90
[    3.469901] i915 0000:00:02.0: power state changed by ACPI to D0
[    3.469907] i915 0000:00:02.0: power state changed by ACPI to D0
[    3.469915] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    3.469919] i915 0000:00:02.0: setting latency timer to 64
[    3.581421] usb 1-1.1.4.3: new low speed USB device number 11 using ehci_hcd
[    3.612936] i915 0000:00:02.0: irq 43 for MSI/MSI-X
[    3.612942] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[    3.612943] [drm] Driver supports precise vblank timestamp query.
[    3.613281] [drm:intel_dsm_pci_probe] *ERROR* failed to get supported _DSM functions
[    3.613416] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    3.741144] usb 1-1.1.4.4: new full speed USB device number 12 using ehci_hcd
[    3.863936] scsi6 : uas
[    3.865750] scsi 6:0:0:0: Direct-Access     Hitachi  Hitachi HDS72303 A580 PQ: 0 ANSI: 4
[    3.865952] sd 6:0:0:0: Attached scsi generic sg2 type 0
[    3.869772] input: HID 05f3:0007 as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1.3/1-1.1.3.2/1-1.1.3.2:1.0/input/input6
[    3.869894] generic-usb 0003:05F3:0007.0001: input,hidraw0: USB HID v1.00 Keyboard [HID 05f3:0007] on usb-0000:00:1a.0-1.1.3.2/input0
[    3.876295] input: HID 05f3:0007 as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1.3/1-1.1.3.2/1-1.1.3.2:1.1/input/input7
[    3.876479] generic-usb 0003:05F3:0007.0002: input,hidraw1: USB HID v1.00 Device [HID 05f3:0007] on usb-0000:00:1a.0-1.1.3.2/input1
[    3.876769] input: Griffin PowerMate as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1.4/1-1.1.4.3/1-1.1.4.3:1.0/input/input8
[    3.876831] usbcore: registered new interface driver powermate
[    3.877242] firewire_core: created device fw0: GUID f0def1ff41828eff, S400
[    3.879808] input: Cirque Corporation USB GlidePoint as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1.3/1-1.1.3.3/1-1.1.3.3:1.0/input/input9
[    3.880024] generic-usb 0003:0488:0020.0003: input,hidraw2: USB HID v1.00 Mouse [Cirque Corporation USB GlidePoint] on usb-0000:00:1a.0-1.1.3.3/input0
[    3.885108] input: 3Dconnexion  SpacePilot PRO  as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1.4/1-1.1.4.1/1-1.1.4.1:1.1/input/input10
[    3.885331] generic-usb 0003:046D:C629.0005: input,hidraw3: USB HID v1.11 Multi-Axis Controller [3Dconnexion  SpacePilot PRO ] on usb-0000:00:1a.0-1.1.4.1/input1
[    3.886887] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1.4/1-1.1.4.4/1-1.1.4.4:1.0/input/input11
[    3.886996] generic-usb 0003:046D:C525.0006: input,hidraw4: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1a.0-1.1.4.4/input0
[    3.889719] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1.4/1-1.1.4.4/1-1.1.4.4:1.1/input/input12
[    3.889968] generic-usb 0003:046D:C525.0007: input,hiddev0,hidraw5: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1a.0-1.1.4.4/input1
[    3.890002] usbcore: registered new interface driver usbhid
[    3.890004] usbhid: USB HID core driver
[    3.969792] input: Kensington Kensington Slimblade Trackball as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1.3/1-1.1.3.4/1-1.1.3.4:1.0/input/input13
[    3.969904] kensington 0003:047D:2041.0004: input,hidraw6: USB HID v1.10 Mouse [Kensington Kensington Slimblade Trackball] on usb-0000:00:1a.0-1.1.3.4/input0
[    4.230795] Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd047b3/0xb40000/0xa0000
[    4.230807] serio: Synaptics pass-through port at isa0060/serio1/input0
[    4.287376] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input14
[    4.763041] fbcon: inteldrmfb (fb0) is primary device
[    5.156174] Console: switching to colour frame buffer device 170x48
[    5.161934] fb0: inteldrmfb frame buffer device
[    5.161937] drm: registered panic notifier
[    5.196952] acpi device:02: registered as cooling_device4
[    5.199445] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input15
[    5.199507] ACPI: Video Device [VID] (multi-head: yes  rom: no  post: no)
[    5.199618] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[    5.199697] HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    5.199785] HDA Intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[    5.199817] HDA Intel 0000:00:1b.0: setting latency timer to 64
[    8.659039] intel ips 0000:00:1f.6: i915 driver attached, reenabling gpu turbo
[   11.510043] IBM TrackPoint firmware: 0x0e, buttons: 3/3
[   11.804574] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input16
[   33.452001] EXT4-fs (sda3): re-mounted. Opts: (null)
[   34.564309] sd 6:0:0:0: uas_eh_abort_handler tag 1
[   34.564314] sd 6:0:0:0: uas_eh_abort_handler tag 0
[   34.564320] sd 6:0:0:0: uas_eh_device_reset_handler tag 1
[   34.564324] sd 6:0:0:0: uas_eh_target_reset_handler tag 1
[   34.564327] sd 6:0:0:0: uas_eh_bus_reset_handler tag 0
[   34.631016] usb 2-1.2: reset high speed USB device number 3 using ehci_hcd
[   34.775672] sd 6:0:0:0: Device offlined - not ready after error recovery
[   34.775677] sd 6:0:0:0: Device offlined - not ready after error recovery
[   34.775747] sd 6:0:0:0: rejecting I/O to offline device
[   34.775802] sd 6:0:0:0: rejecting I/O to offline device
[   34.775848] sd 6:0:0:0: rejecting I/O to offline device
[   34.775890] sd 6:0:0:0: [sdb] READ CAPACITY failed
[   34.775891] sd 6:0:0:0: [sdb]  Result: hostbyte=0x01 driverbyte=0x00
[   34.775894] sd 6:0:0:0: [sdb] Sense not available.
[   34.775898] sd 6:0:0:0: rejecting I/O to offline device
[   34.775922] sd 6:0:0:0: [sdb] Write Protect is off
[   34.775924] sd 6:0:0:0: [sdb] Mode Sense: 00 00 00 00
[   34.775926] sd 6:0:0:0: rejecting I/O to offline device
[   34.775950] sd 6:0:0:0: [sdb] Asking for cache data failed
[   34.775974] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[   34.776115] sd 6:0:0:0: rejecting I/O to offline device
[   34.776202] sd 6:0:0:0: rejecting I/O to offline device
[   34.776352] sd 6:0:0:0: [sdb] Attached SCSI disk
[   34.776893] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input17
[   34.777472] scsi 6:0:0:1: Enclosure         Hitachi  SES              A580 PQ: 0 ANSI: 4
[   34.779811] Linux media interface: v0.10
[   34.780082] scsi 6:0:0:1: Attached scsi generic sg3 type 13
[   34.783808] scsi 6:0:0:2: uas_eh_device_reset_handler tag -1
[   34.783812] scsi 6:0:0:2: uas_eh_target_reset_handler tag -1
[   34.783814] scsi 6:0:0:2: uas_eh_bus_reset_handler tag -1
[   34.786249] HDMI status: Pin=4 Presence_Detect=0 ELD_Valid=0
[   34.786640] HDMI status: Pin=5 Presence_Detect=0 ELD_Valid=0
[   34.787032] HDMI status: Pin=6 Presence_Detect=0 ELD_Valid=0
[   34.789229] Linux video capture interface: v2.00
[   34.791836] input: HDA Intel HDMI/DP as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18
[   34.791922] input: HDA Intel HDMI/DP as /devices/pci0000:00/0000:00:1b.0/sound/card0/input19
[   34.791996] input: HDA Intel HDMI/DP as /devices/pci0000:00/0000:00:1b.0/sound/card0/input20
[   34.796856] uvcvideo: Found UVC 1.00 device Integrated Camera (17ef:480f)
[   34.799313] input: Integrated Camera as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input21
[   34.799388] usbcore: registered new interface driver uvcvideo
[   34.799390] USB Video Class driver (v1.1.0)
[   34.800461] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
[   34.820766] Adding 265068k swap on /dev/sda2.  Priority:-1 extents:1 across:265068k SS
[   34.853994] usb 2-1.2: reset high speed USB device number 3 using ehci_hcd
[   35.001582] scsi 6:0:0:2: Device offlined - not ready after error recovery
[   35.020309] usbcore: registered new interface driver uas
[   35.023982] Initializing USB Mass Storage driver...
[   35.024154] usbcore: registered new interface driver usb-storage
[   35.024156] USB Mass Storage support registered.
[   35.029433] ses 6:0:0:1: Attached Enclosure device
[   35.457828] Bluetooth: Core ver 2.16
[   35.457858] NET: Registered protocol family 31
[   35.457861] Bluetooth: HCI device and connection manager initialized
[   35.457865] Bluetooth: HCI socket layer initialized
[   35.457868] Bluetooth: L2CAP socket layer initialized
[   35.457922] Bluetooth: SCO socket layer initialized
[   35.462246] Bluetooth: BNEP (Ethernet Emulation) ver 1.3

If i disconnect and reconnect it i see:

[  954.565976] usb 2-1.2: USB disconnect, device number 3
[  964.956756] usb 2-1.2: new high speed USB device number 4 using ehci_hcd
[  965.104888] scsi7 : uas

Any ideas?

Last edited by wbendick (2012-01-22 01:24:05)

Offline

#2 2011-10-09 09:38:11

thisoldman
Member
From: Pittsburgh
Registered: 2009-04-25
Posts: 1,172

Re: [SOLVED] 3TB usb disk

Looking over older forum threads, there are few posts about these large hard drives, and I couldn't find any about the USB versions.

There might be some clues in this thread: https://bbs.archlinux.org/viewtopic.php?id=114977.

Offline

#3 2011-10-09 14:29:16

lilsirecho
Veteran
Registered: 2003-10-24
Posts: 5,000

Re: [SOLVED] 3TB usb disk

Perhaps googling will help to identify the use of 3TB instead of the normal 2TB limit.

Prediction...This year will be a very odd year!
Hard work does not kill people but why risk it: Charlie Mccarthy
A man is not complete until he is married..then..he is finished.
When ALL is lost, what can be found? Even bytes get lonely for a little bit!     X-ray confirms Iam spineless!

Offline

#4 2011-10-10 06:47:14

wbendick
Member
Registered: 2011-10-09
Posts: 7

Re: [SOLVED] 3TB usb disk

My problem isn't that I'm having trouble making a 3TB partition, I don't seem to have anything in /dev corresponding to the disk. I have verified that the disk works by plugging it into a mac which recognized it without issue.

Offline

#5 2011-10-10 06:54:21

wbendick
Member
Registered: 2011-10-09
Posts: 7

Re: [SOLVED] 3TB usb disk

I also see a lot of this in my dmesg which may or may not be related:

[109566.983582] scsi 9:0:0:1: sense urb submission failure
[109566.990237] scsi 9:0:0:1: sense urb submission failure
[109566.996861] scsi 9:0:0:1: sense urb submission failure
[109567.003502] scsi 9:0:0:1: sense urb submission failure
[109567.010203] scsi 9:0:0:1: sense urb submission failure
[109567.016862] scsi 9:0:0:1: sense urb submission failure
[109567.023482] scsi 9:0:0:1: sense urb submission failure

Offline

#6 2011-10-10 08:29:20

thisoldman
Member
From: Pittsburgh
Registered: 2009-04-25
Posts: 1,172

Re: [SOLVED] 3TB usb disk

I'm usually pretty good with Googling for information.  I wasn't so lucky with your problem.

The recognition of the drive on boot might be a motherboard or BIOS limitation.  That's a maybe.  The Mac boots with EFI or UEFI, your linux box may not.

Does 'lsusb' or 'parted -l' (if you have parted installed) reveal anything?  Just to make sure that we and dmesg didn't miss anything, you can run:

cat /proc/diskstats'

Edit: removed a question answered in the dmesg output.

Last edited by thisoldman (2011-10-10 08:51:15)

Offline

#7 2011-10-10 11:35:56

.:B:.
Forum Fellow
Registered: 2006-11-26
Posts: 5,819
Website

Re: [SOLVED] 3TB usb disk

What does this tell you:

# udevadm monitor

When you plug in the drive? Start the command before you plug it in. If it prints stuff, it should give you pointers.

You already formatted the drive on your Mac I assume? Are you sure it's using GPT and not APM?

I recently converted all my server HDs (1x 1 TB, 2x 2 TB) to GPT, no trouble there.

Last edited by .:B:. (2011-10-10 11:36:41)

Got Leenucks? :: Arch: Power in simplicity :: Get Counted! Registered Linux User #392717 :: Blog thingy

Offline

#8 2011-10-12 02:29:38

wbendick
Member
Registered: 2011-10-09
Posts: 7

Re: [SOLVED] 3TB usb disk

$udevadm monitor
monitor will print the received events for:
UDEV - the event which udev sends out after rule processing
KERNEL - the kernel uevent

KERNEL[146.226016] add      /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2 (usb)
KERNEL[146.226437] add      /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0 (usb)
UDEV  [146.293964] add      /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2 (usb)
KERNEL[146.298213] add      /module/uas (module)
UDEV  [146.298495] add      /module/uas (module)
KERNEL[146.298874] add      /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/host6 (scsi)
KERNEL[146.298912] add      /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/host6/scsi_host/host6 (scsi_host)
KERNEL[161.203518] add      /bus/usb/drivers/uas (drivers)
UDEV  [161.203942] add      /bus/usb/drivers/uas (drivers)
KERNEL[161.207878] add      /module/usb_storage (module)
UDEV  [161.208080] add      /module/usb_storage (module)
KERNEL[161.208095] add      /bus/usb/drivers/usb-storage (drivers)
UDEV  [161.208212] add      /bus/usb/drivers/usb-storage (drivers)
UDEV  [161.208313] add      /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0 (usb)
UDEV  [161.208639] add      /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/host6 (scsi)
UDEV  [161.209263] add      /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/host6/scsi_host/host6 (scsi_host)
$ cat /proc/diskstats 
   8       0 sda 6530 11742 405257 4416 1115 590 39083 4346 0 3643 8760
   8       1 sda1 634 1470 5066 210 1 0 2 0 0 206 210
   8       2 sda2 327 2494 2828 146 0 0 0 0 0 146 146
   8       3 sda3 3272 3629 301311 2320 176 176 3712 253 0 1806 2573
   8       4 sda4 2267 4149 95812 1736 888 414 35369 3890 0 1880 5623
  11       0 sr0 0 0 0 0 0 0 0 0 0 0 0

Offline

#9 2011-10-12 02:49:29

wbendick
Member
Registered: 2011-10-09
Posts: 7

Re: [SOLVED] 3TB usb disk

I notice if I plug in an old usb thumb drive I get:

[ 1149.432135] usb 1-1.1.1: new high speed USB device number 13 using ehci_hcd
[ 1149.546322] scsi7 : usb-storage 1-1.1.1:1.0
[ 1150.544472] scsi 7:0:0:0: Direct-Access     iT1167   USB Flash Disk   0.00 PQ: 0 ANSI: 2
[ 1150.545455] sd 7:0:0:0: Attached scsi generic sg2 type 0
[ 1150.545886] sd 7:0:0:0: [sdb] 3781632 512-byte logical blocks: (1.93 GB/1.80 GiB)
[ 1150.546375] sd 7:0:0:0: [sdb] Write Protect is off
[ 1150.546381] sd 7:0:0:0: [sdb] Mode Sense: 00 00 00 00
[ 1150.547115] sd 7:0:0:0: [sdb] Asking for cache data failed
[ 1150.547121] sd 7:0:0:0: [sdb] Assuming drive cache: write through
[ 1150.550813] sd 7:0:0:0: [sdb] Asking for cache data failed
[ 1150.550819] sd 7:0:0:0: [sdb] Assuming drive cache: write through
[ 1150.791675]  sdb:
[ 1150.794974] sd 7:0:0:0: [sdb] Asking for cache data failed
[ 1150.794982] sd 7:0:0:0: [sdb] Assuming drive cache: write through
[ 1150.794989] sd 7:0:0:0: [sdb] Attached SCSI removable disk

vs this for the 3TB disk:

[ 1230.339020] usb 2-1.2: new high speed USB device number 4 using ehci_hcd
[ 1230.487246] scsi8 : uas

specifically it says uas instead of usb-storage... can anyone tell me what uas is?

Offline

#10 2011-10-12 06:29:02

.:B:.
Forum Fellow
Registered: 2006-11-26
Posts: 5,819
Website

Re: [SOLVED] 3TB usb disk

My first Google hit says UAS is 'USB Attached SCSI'. You could have found that out as well...

It seems you do need the xhci module enabled. Make sure it's loaded, then plug in your HD again. The full module name is xhci-hcd.

$ pacman -Ql linux|grep xhci
/lib/modules/3.0-ARCH/kernel/drivers/usb/host/xhci-hcd.ko.gz

Your issue is not the 3 TB disk or partition; your issue is USB 3.0. Rename your topic title accordingly and mention the fact your disk is USB 3.0 in your opening post if my suggestion fixes it, so people with a similar problem can find this thread.

Last edited by .:B:. (2011-10-12 06:40:47)

Got Leenucks? :: Arch: Power in simplicity :: Get Counted! Registered Linux User #392717 :: Blog thingy

Offline

#11 2011-10-13 05:30:11

wbendick
Member
Registered: 2011-10-09
Posts: 7

Re: [SOLVED] 3TB usb disk

I have xhci_hcd loaded from my rc.conf:

MODULES=(snd_seq_oss snd_pcm_oss snd_mixer_oss xhci_hcd)

and I've found the drive actually does map to /dev/sdc, but only if I unplug it and replug it in after booting. Any ideas as to why it wouldn't work directly from booting?

Offline

#12 2011-10-13 09:25:02

.:B:.
Forum Fellow
Registered: 2006-11-26
Posts: 5,819
Website

Re: [SOLVED] 3TB usb disk

Try including it in your initcpio image, reboot, see if it works.

Does it work if you only plug it in after your computer has finished booting?

Got Leenucks? :: Arch: Power in simplicity :: Get Counted! Registered Linux User #392717 :: Blog thingy

Offline

#13 2012-01-22 01:19:15

wbendick
Member
Registered: 2011-10-09
Posts: 7

Re: [SOLVED] 3TB usb disk

I solved the problem. Something is wrong with uas. If I remove it, everything works fine.

rmmod uas

Offline

Pages: 1

Board footer

Powered by FluxBB