You are not logged in.
- Topics: Active | Unanswered
#1 2011-10-22 17:46:12
- JazzPotato
- Member
- Registered: 2011-10-22
- Posts: 39
[SOLVED] Arch Linux GNOME3 stuck in fallback, nvidia drivers wont work
Hi forum,
Ive been trying to fix this problem for while now and have tried seemingly every solution. I am 100% certain my hardware is capable of running GNOME3 (gtx 465), and am hoping someone with more experience can help :-).
I'm using the nouveau drivers, (nouveau-firmaware, nouveau-dri, xf86-video-nouveau, lib32-nouveau-dri). When i tried installing the NVIDIA proprietory drivers instead i got "maximum number of x server failures reached" and no gui. I dont know how nouveau can get me fallback but is insufficient to get me GNOME3.
There is one thing i've noticed, on bootup i get a nouveau error message: "Pointer to BIT loadval table invalid" and "failed to load fuc409c". I'm so frustrated! :-(
I'm going to subscribe to this thread and get pervy over my e-mails so i can give you a quick reply.
Thanks in advance!
Gary
Last edited by JazzPotato (2011-10-22 21:37:08)
Tea, Earl Grey, hot
Offline
#2 2011-10-22 17:54:25
- wonder
- Developer
- From: Bucharest, Romania
- Registered: 2006-07-05
- Posts: 5,941
- Website
Re: [SOLVED] Arch Linux GNOME3 stuck in fallback, nvidia drivers wont work
first of all, your card is too new to be supported well by nouveau. it needs firmware to be extracted from nvidia. nouveau-firmware is old as hell, so doesn't matter.
how did you installed nvidia?
Give what you have. To someone, it may be better than you dare to think.
Offline
#3 2011-10-22 17:56:52
- JazzPotato
- Member
- Registered: 2011-10-22
- Posts: 39
Re: [SOLVED] Arch Linux GNOME3 stuck in fallback, nvidia drivers wont work
I did:
pacman -R nouveau-dri
pacman -S nvidia
Tea, Earl Grey, hot
Offline
#4 2011-10-22 17:57:34
- JazzPotato
- Member
- Registered: 2011-10-22
- Posts: 39
Re: [SOLVED] Arch Linux GNOME3 stuck in fallback, nvidia drivers wont work
The nvidia drivers didnt work however
Tea, Earl Grey, hot
Offline
#5 2011-10-22 18:01:16
- wonder
- Developer
- From: Bucharest, Romania
- Registered: 2006-07-05
- Posts: 5,941
- Website
Re: [SOLVED] Arch Linux GNOME3 stuck in fallback, nvidia drivers wont work
have you rebooted after installing nvidia?
paste /var/log/Xorg.0.log
Give what you have. To someone, it may be better than you dare to think.
Offline
#6 2011-10-22 18:03:38
- JazzPotato
- Member
- Registered: 2011-10-22
- Posts: 39
Re: [SOLVED] Arch Linux GNOME3 stuck in fallback, nvidia drivers wont work
[ 17.913]
X.Org X Server 1.11.1
Release Date: 2011-09-24
[ 17.913] X Protocol Version 11, Revision 0
[ 17.913] Build Operating System: Linux 3.0-ARCH x86_64
[ 17.913] Current Operating System: Linux glcheetham 3.0-ARCH #1 SMP PREEMPT Wed Oct 19 10:27:51 CEST 2011 x86_64
[ 17.913] Kernel command line: root=/dev/disk/by-uuid/cceac501-2796-4d39-8225-496c69831f94 ro
[ 17.913] Build Date: 10 October 2011 08:55:30AM
[ 17.913]
[ 17.913] Current version of pixman: 0.22.2
[ 17.913] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 17.913] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 17.913] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Oct 22 18:11:30 2011
[ 17.944] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 17.969] (==) No Layout section. Using the first Screen section.
[ 17.969] (==) No screen section available. Using defaults.
[ 17.969] (**) |-->Screen "Default Screen Section" (0)
[ 17.969] (**) | |-->Monitor "<default monitor>"
[ 17.970] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[ 17.970] (**) | |-->Device "Nvidia card"
[ 17.970] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 17.970] (==) Automatically adding devices
[ 17.970] (==) Automatically enabling devices
[ 18.023] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 18.023] Entry deleted from font path.
[ 18.035] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 18.035] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 18.035] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 18.035] (II) Loader magic: 0x7ccae0
[ 18.035] (II) Module ABI versions:
[ 18.035] X.Org ANSI C Emulation: 0.4
[ 18.035] X.Org Video Driver: 11.0
[ 18.035] X.Org XInput driver : 13.0
[ 18.035] X.Org Server Extension : 6.0
[ 18.036] (--) PCI:*(0:1:0:0) 10de:06c4:10de:0839 rev 163, Mem @ 0xf8000000/33554432, 0xd0000000/134217728, 0xdc000000/67108864, I/O @ 0x0000ef00/128, BIOS @ 0x????????/524288
[ 18.036] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 18.036] (II) LoadModule: "extmod"
[ 18.061] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 18.073] (II) Module extmod: vendor="X.Org Foundation"
[ 18.073] compiled for 1.11.1, module version = 1.0.0
[ 18.073] Module class: X.Org Server Extension
[ 18.073] ABI class: X.Org Server Extension, version 6.0
[ 18.073] (II) Loading extension MIT-SCREEN-SAVER
[ 18.073] (II) Loading extension XFree86-VidModeExtension
[ 18.073] (II) Loading extension XFree86-DGA
[ 18.073] (II) Loading extension DPMS
[ 18.073] (II) Loading extension XVideo
[ 18.073] (II) Loading extension XVideo-MotionCompensation
[ 18.073] (II) Loading extension X-Resource
[ 18.073] (II) LoadModule: "dbe"
[ 18.073] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 18.074] (II) Module dbe: vendor="X.Org Foundation"
[ 18.074] compiled for 1.11.1, module version = 1.0.0
[ 18.074] Module class: X.Org Server Extension
[ 18.074] ABI class: X.Org Server Extension, version 6.0
[ 18.074] (II) Loading extension DOUBLE-BUFFER
[ 18.074] (II) LoadModule: "glx"
[ 18.074] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 18.079] (II) Module glx: vendor="X.Org Foundation"
[ 18.079] compiled for 1.11.1, module version = 1.0.0
[ 18.079] ABI class: X.Org Server Extension, version 6.0
[ 18.079] (==) AIGLX enabled
[ 18.079] (II) Loading extension GLX
[ 18.080] (II) LoadModule: "record"
[ 18.080] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 18.080] (II) Module record: vendor="X.Org Foundation"
[ 18.080] compiled for 1.11.1, module version = 1.13.0
[ 18.080] Module class: X.Org Server Extension
[ 18.080] ABI class: X.Org Server Extension, version 6.0
[ 18.080] (II) Loading extension RECORD
[ 18.080] (II) LoadModule: "dri"
[ 18.080] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 18.081] (II) Module dri: vendor="X.Org Foundation"
[ 18.081] compiled for 1.11.1, module version = 1.0.0
[ 18.081] ABI class: X.Org Server Extension, version 6.0
[ 18.081] (II) Loading extension XFree86-DRI
[ 18.081] (II) LoadModule: "dri2"
[ 18.081] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 18.082] (II) Module dri2: vendor="X.Org Foundation"
[ 18.082] compiled for 1.11.1, module version = 1.2.0
[ 18.082] ABI class: X.Org Server Extension, version 6.0
[ 18.082] (II) Loading extension DRI2
[ 18.082] (II) LoadModule: "nouveau"
[ 18.102] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[ 18.103] (II) Module nouveau: vendor="X.Org Foundation"
[ 18.103] compiled for 1.11.0, module version = 0.0.16
[ 18.103] Module class: X.Org Video Driver
[ 18.103] ABI class: X.Org Video Driver, version 11.0
[ 18.103] (II) NOUVEAU driver
[ 18.103] (II) NOUVEAU driver for NVIDIA chipset families :
[ 18.103] RIVA TNT (NV04)
[ 18.103] RIVA TNT2 (NV05)
[ 18.104] GeForce 256 (NV10)
[ 18.104] GeForce 2 (NV11, NV15)
[ 18.104] GeForce 4MX (NV17, NV18)
[ 18.104] GeForce 3 (NV20)
[ 18.104] GeForce 4Ti (NV25, NV28)
[ 18.104] GeForce FX (NV3x)
[ 18.104] GeForce 6 (NV4x)
[ 18.104] GeForce 7 (G7x)
[ 18.104] GeForce 8 (G8x)
[ 18.104] GeForce GTX 200 (NVA0)
[ 18.104] GeForce GTX 400 (NVC0)
[ 18.104] (++) using VT number 7
[ 18.109] drmOpenDevice: node name is /dev/dri/card0
[ 18.109] drmOpenDevice: open result is 7, (OK)
[ 18.109] drmOpenByBusid: Searching for BusID pci:0000:01:00.0
[ 18.109] drmOpenDevice: node name is /dev/dri/card0
[ 18.109] drmOpenDevice: open result is 7, (OK)
[ 18.109] drmOpenByBusid: drmOpenMinor returns 7
[ 18.109] drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
[ 18.109] (II) [drm] nouveau interface version: 0.0.16
[ 18.109] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[ 18.109] (II) Loading sub module "dri"
[ 18.109] (II) LoadModule: "dri"
[ 18.109] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 18.109] (II) Module dri: vendor="X.Org Foundation"
[ 18.109] compiled for 1.11.1, module version = 1.0.0
[ 18.109] ABI class: X.Org Server Extension, version 6.0
[ 18.109] (II) NOUVEAU(0): Loaded DRI module
[ 18.109] drmOpenDevice: node name is /dev/dri/card0
[ 18.109] drmOpenDevice: open result is 8, (OK)
[ 18.109] drmOpenDevice: node name is /dev/dri/card0
[ 18.109] drmOpenDevice: open result is 8, (OK)
[ 18.109] drmOpenByBusid: Searching for BusID pci:0000:01:00.0
[ 18.109] drmOpenDevice: node name is /dev/dri/card0
[ 18.109] drmOpenDevice: open result is 8, (OK)
[ 18.109] drmOpenByBusid: drmOpenMinor returns 8
[ 18.109] drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
[ 18.109] (II) [drm] DRM interface version 1.4
[ 18.109] (II) [drm] DRM open master succeeded.
[ 18.109] (--) NOUVEAU(0): Chipset: "NVIDIA NVc0"
[ 18.109] (II) NOUVEAU(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 18.109] (==) NOUVEAU(0): Depth 24, (--) framebuffer bpp 32
[ 18.109] (==) NOUVEAU(0): RGB weight 888
[ 18.109] (==) NOUVEAU(0): Default visual is TrueColor
[ 18.109] (==) NOUVEAU(0): Using HW cursor
[ 18.109] (==) NOUVEAU(0): GLX sync to VBlank disabled.
[ 18.109] (==) NOUVEAU(0): Page flipping enabled
[ 18.215] (II) NOUVEAU(0): Output DVI-I-1 has no monitor section
[ 18.320] (II) NOUVEAU(0): Output DVI-I-2 has no monitor section
[ 18.328] (II) NOUVEAU(0): Output HDMI-1 has no monitor section
[ 18.432] (II) NOUVEAU(0): EDID for output DVI-I-1
[ 18.432] (II) NOUVEAU(0): Manufacturer: HWP Model: 288c Serial#: 16843009
[ 18.432] (II) NOUVEAU(0): Year: 2009 Week: 53
[ 18.432] (II) NOUVEAU(0): EDID Version: 1.3
[ 18.432] (II) NOUVEAU(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
[ 18.432] (II) NOUVEAU(0): Sync: Separate
[ 18.432] (II) NOUVEAU(0): Max Image Size [cm]: horiz.: 48 vert.: 27
[ 18.433] (II) NOUVEAU(0): Gamma: 2.20
[ 18.433] (II) NOUVEAU(0): DPMS capabilities: Off; RGB/Color Display
[ 18.433] (II) NOUVEAU(0): Default color space is primary color space
[ 18.433] (II) NOUVEAU(0): First detailed timing is preferred mode
[ 18.433] (II) NOUVEAU(0): redX: 0.646 redY: 0.334 greenX: 0.303 greenY: 0.616
[ 18.433] (II) NOUVEAU(0): blueX: 0.147 blueY: 0.067 whiteX: 0.313 whiteY: 0.329
[ 18.433] (II) NOUVEAU(0): Supported established timings:
[ 18.433] (II) NOUVEAU(0): 720x400@70Hz
[ 18.433] (II) NOUVEAU(0): 640x480@60Hz
[ 18.433] (II) NOUVEAU(0): 800x600@60Hz
[ 18.433] (II) NOUVEAU(0): 1024x768@60Hz
[ 18.433] (II) NOUVEAU(0): Manufacturer's mask: 0
[ 18.433] (II) NOUVEAU(0): Supported standard timings:
[ 18.433] (II) NOUVEAU(0): #0: hsize: 1280 vsize 720 refresh: 60 vid: 49281
[ 18.433] (II) NOUVEAU(0): #1: hsize: 1280 vsize 960 refresh: 60 vid: 16513
[ 18.433] (II) NOUVEAU(0): #2: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 18.433] (II) NOUVEAU(0): #3: hsize: 1440 vsize 900 refresh: 60 vid: 149
[ 18.433] (II) NOUVEAU(0): #4: hsize: 1600 vsize 1200 refresh: 60 vid: 16553
[ 18.433] (II) NOUVEAU(0): #5: hsize: 1680 vsize 1050 refresh: 60 vid: 179
[ 18.433] (II) NOUVEAU(0): #6: hsize: 1920 vsize 1080 refresh: 60 vid: 49361
[ 18.433] (II) NOUVEAU(0): Supported detailed timing:
[ 18.433] (II) NOUVEAU(0): clock: 148.5 MHz Image Size: 476 x 268 mm
[ 18.433] (II) NOUVEAU(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
[ 18.433] (II) NOUVEAU(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
[ 18.433] (II) NOUVEAU(0): Ranges: V min: 50 V max: 76 Hz, H min: 24 H max: 94 kHz, PixClock max 205 MHz
[ 18.433] (II) NOUVEAU(0): Monitor name: HP 2210
[ 18.433] (II) NOUVEAU(0): Serial No: 3CQ95314DP
[ 18.433] (II) NOUVEAU(0): EDID (in hex):
[ 18.433] (II) NOUVEAU(0): 00ffffffffffff0022f08c2801010101
[ 18.433] (II) NOUVEAU(0): 3513010368301b782eabd5a5554d9d25
[ 18.433] (II) NOUVEAU(0): 115054a1080081c0814081809500a940
[ 18.433] (II) NOUVEAU(0): b300d1c00101023a801871382d40582c
[ 18.433] (II) NOUVEAU(0): 4500dc0c1100001e000000fd00324c18
[ 18.433] (II) NOUVEAU(0): 5e14000a202020202020000000fc0048
[ 18.433] (II) NOUVEAU(0): 5020323231300a2020202020000000ff
[ 18.433] (II) NOUVEAU(0): 00334351393533313444500a20200083
[ 18.433] (II) NOUVEAU(0): EDID vendor "HWP", prod id 10380
[ 18.450] (II) NOUVEAU(0): Using EDID range info for horizontal sync
[ 18.450] (II) NOUVEAU(0): Using EDID range info for vertical refresh
[ 18.450] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 18.450] (II) NOUVEAU(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz)
[ 18.450] (II) NOUVEAU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 18.450] (II) NOUVEAU(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 18.450] (II) NOUVEAU(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 18.450] (II) NOUVEAU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 18.450] (II) NOUVEAU(0): Modeline "1280x720"x60.0 74.48 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.8 kHz)
[ 18.450] (II) NOUVEAU(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
[ 18.450] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 18.450] (II) NOUVEAU(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz)
[ 18.450] (II) NOUVEAU(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz)
[ 18.450] (II) NOUVEAU(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
[ 18.450] (II) NOUVEAU(0): Modeline "1920x1080"x60.0 172.80 1920 2040 2248 2576 1080 1081 1084 1118 -hsync +vsync (67.1 kHz)
[ 18.451] (II) NOUVEAU(0): Printing probed modes for output DVI-I-1
[ 18.451] (II) NOUVEAU(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz)
[ 18.451] (II) NOUVEAU(0): Modeline "1600x1200"x60.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz)
[ 18.451] (II) NOUVEAU(0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
[ 18.451] (II) NOUVEAU(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 18.451] (II) NOUVEAU(0): Modeline "1440x900"x59.9 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz)
[ 18.451] (II) NOUVEAU(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
[ 18.451] (II) NOUVEAU(0): Modeline "1280x720"x60.0 74.44 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.7 kHz)
[ 18.451] (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 18.451] (II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 18.451] (II) NOUVEAU(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 18.451] (II) NOUVEAU(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 18.556] (II) NOUVEAU(0): EDID for output DVI-I-2
[ 18.563] (II) NOUVEAU(0): EDID for output HDMI-1
[ 18.563] (II) NOUVEAU(0): Output DVI-I-1 connected
[ 18.563] (II) NOUVEAU(0): Output DVI-I-2 disconnected
[ 18.563] (II) NOUVEAU(0): Output HDMI-1 disconnected
[ 18.563] (II) NOUVEAU(0): Using exact sizes for initial modes
[ 18.563] (II) NOUVEAU(0): Output DVI-I-1 using initial mode 1920x1080
[ 18.563] (II) NOUVEAU(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 18.563] (--) NOUVEAU(0): Virtual size is 1920x1080 (pitch 0)
[ 18.563] (**) NOUVEAU(0): Driver mode "1920x1080": 148.5 MHz (scaled from 0.0 MHz), 67.5 kHz, 60.0 Hz
[ 18.563] (II) NOUVEAU(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz)
[ 18.563] (**) NOUVEAU(0): Driver mode "1600x1200": 162.0 MHz (scaled from 0.0 MHz), 75.0 kHz, 60.0 Hz
[ 18.563] (II) NOUVEAU(0): Modeline "1600x1200"x60.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz)
[ 18.563] (**) NOUVEAU(0): Driver mode "1680x1050": 146.2 MHz (scaled from 0.0 MHz), 65.3 kHz, 60.0 Hz
[ 18.563] (II) NOUVEAU(0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
[ 18.563] (**) NOUVEAU(0): Driver mode "1280x1024": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
[ 18.563] (II) NOUVEAU(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 18.563] (**) NOUVEAU(0): Driver mode "1440x900": 106.5 MHz (scaled from 0.0 MHz), 55.9 kHz, 59.9 Hz
[ 18.563] (II) NOUVEAU(0): Modeline "1440x900"x59.9 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz)
[ 18.563] (**) NOUVEAU(0): Driver mode "1280x960": 108.0 MHz (scaled from 0.0 MHz), 60.0 kHz, 60.0 Hz
[ 18.563] (II) NOUVEAU(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
[ 18.563] (**) NOUVEAU(0): Mode "1280x720": 74.4 MHz (scaled from 0.0 MHz), 44.7 kHz, 60.0 Hz
[ 18.563] (II) NOUVEAU(0): Modeline "1280x720"x60.0 74.44 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.7 kHz)
[ 18.563] (**) NOUVEAU(0): Driver mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
[ 18.563] (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 18.563] (**) NOUVEAU(0): Driver mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.3 Hz
[ 18.564] (II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 18.564] (**) NOUVEAU(0): Driver mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
[ 18.564] (II) NOUVEAU(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 18.564] (**) NOUVEAU(0): Driver mode "720x400": 28.3 MHz (scaled from 0.0 MHz), 31.5 kHz, 70.1 Hz
[ 18.564] (II) NOUVEAU(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 18.564] (**) NOUVEAU(0): Display dimensions: (480, 270) mm
[ 18.564] (**) NOUVEAU(0): DPI set to (101, 101)
[ 18.564] (II) Loading sub module "fb"
[ 18.564] (II) LoadModule: "fb"
[ 18.564] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 18.580] (II) Module fb: vendor="X.Org Foundation"
[ 18.580] compiled for 1.11.1, module version = 1.0.0
[ 18.580] ABI class: X.Org ANSI C Emulation, version 0.4
[ 18.580] (II) Loading sub module "exa"
[ 18.580] (II) LoadModule: "exa"
[ 18.580] (II) Loading /usr/lib/xorg/modules/libexa.so
[ 18.585] (II) Module exa: vendor="X.Org Foundation"
[ 18.585] compiled for 1.11.1, module version = 2.5.0
[ 18.585] ABI class: X.Org Video Driver, version 11.0
[ 18.585] (II) Loading sub module "shadowfb"
[ 18.585] (II) LoadModule: "shadowfb"
[ 18.598] (II) Loading /usr/lib/xorg/modules/libshadowfb.so
[ 18.602] (II) Module shadowfb: vendor="X.Org Foundation"
[ 18.602] compiled for 1.11.1, module version = 1.0.0
[ 18.602] ABI class: X.Org ANSI C Emulation, version 0.4
[ 18.602] (--) Depth 24 pixmap format is 32 bpp
[ 18.602] (EE) NOUVEAU(0): Error creating GPU channel: -19
[ 18.602] (EE) NOUVEAU(0): Error initialising acceleration. Falling back to NoAccel
[ 18.604] (==) NOUVEAU(0): Backing store disabled
[ 18.604] (==) NOUVEAU(0): Silken mouse enabled
[ 18.604] (==) NOUVEAU(0): DPMS enabled
[ 18.604] (II) NOUVEAU(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 18.604] (--) RandR disabled
[ 18.604] (II) Initializing built-in extension Generic Event Extension
[ 18.604] (II) Initializing built-in extension SHAPE
[ 18.604] (II) Initializing built-in extension MIT-SHM
[ 18.604] (II) Initializing built-in extension XInputExtension
[ 18.604] (II) Initializing built-in extension XTEST
[ 18.604] (II) Initializing built-in extension BIG-REQUESTS
[ 18.604] (II) Initializing built-in extension SYNC
[ 18.604] (II) Initializing built-in extension XKEYBOARD
[ 18.604] (II) Initializing built-in extension XC-MISC
[ 18.604] (II) Initializing built-in extension SECURITY
[ 18.604] (II) Initializing built-in extension XINERAMA
[ 18.604] (II) Initializing built-in extension XFIXES
[ 18.604] (II) Initializing built-in extension RENDER
[ 18.604] (II) Initializing built-in extension RANDR
[ 18.604] (II) Initializing built-in extension COMPOSITE
[ 18.604] (II) Initializing built-in extension DAMAGE
[ 18.609] (II) AIGLX: Screen 0 is not DRI2 capable
[ 18.609] (II) AIGLX: Screen 0 is not DRI capable
[ 18.820] (II) AIGLX: Loaded and initialized swrast
[ 18.820] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[ 18.823] (II) NOUVEAU(0): NVEnterVT is called.
[ 18.847] (II) NOUVEAU(0): Setting screen physical size to 508 x 285
[ 18.847] resize called 1920 1080
[ 19.130] (II) XKB: Reusing cached keymap
[ 19.132] (II) config/udev: Adding input device Power Button (/dev/input/event6)
[ 19.132] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 19.132] (II) LoadModule: "evdev"
[ 19.132] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 19.139] (II) Module evdev: vendor="X.Org Foundation"
[ 19.139] compiled for 1.10.99.902, module version = 2.6.0
[ 19.139] Module class: X.Org XInput Driver
[ 19.139] ABI class: X.Org XInput driver, version 13.0
[ 19.139] (II) Using input driver 'evdev' for 'Power Button'
[ 19.139] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 19.139] Option "XkbRules" "evdev"
[ 19.139] Option "XkbModel" "evdev"
[ 19.139] Option "XkbLayout" "us"
[ 19.139] Option "_source" "server/udev"
[ 19.139] Option "name" "Power Button"
[ 19.139] Option "path" "/dev/input/event6"
[ 19.139] Option "device" "/dev/input/event6"
[ 19.139] Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input6/event6"
[ 19.139] Option "driver" "evdev"
[ 19.139] (**) Power Button: always reports core events
[ 19.139] (**) Power Button: Device: "/dev/input/event6"
[ 19.139] (--) Power Button: Found keys
[ 19.139] (II) Power Button: Configuring as keyboard
[ 19.139] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input6/event6"
[ 19.139] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 19.139] (**) Option "xkb_rules" "evdev"
[ 19.139] (**) Option "xkb_model" "evdev"
[ 19.139] (**) Option "xkb_layout" "us"
[ 19.161] (II) config/udev: Adding input device Power Button (/dev/input/event5)
[ 19.161] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 19.161] (II) Using input driver 'evdev' for 'Power Button'
[ 19.161] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 19.161] Option "XkbRules" "evdev"
[ 19.161] Option "XkbModel" "evdev"
[ 19.161] Option "XkbLayout" "us"
[ 19.161] Option "_source" "server/udev"
[ 19.161] Option "name" "Power Button"
[ 19.161] Option "path" "/dev/input/event5"
[ 19.161] Option "device" "/dev/input/event5"
[ 19.161] Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input5/event5"
[ 19.161] Option "driver" "evdev"
[ 19.161] (**) Power Button: always reports core events
[ 19.161] (**) Power Button: Device: "/dev/input/event5"
[ 19.161] (--) Power Button: Found keys
[ 19.161] (II) Power Button: Configuring as keyboard
[ 19.161] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input5/event5"
[ 19.161] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 19.161] (**) Option "xkb_rules" "evdev"
[ 19.161] (**) Option "xkb_model" "evdev"
[ 19.161] (**) Option "xkb_layout" "us"
[ 19.161] (II) XKB: Reusing cached keymap
[ 19.161] (II) config/udev: Adding input device HDA NVidia HDMI/DP (/dev/input/event10)
[ 19.161] (II) No input driver/identifier specified (ignoring)
[ 19.162] (II) config/udev: Adding input device HDA NVidia HDMI/DP (/dev/input/event11)
[ 19.162] (II) No input driver/identifier specified (ignoring)
[ 19.162] (II) config/udev: Adding input device HDA NVidia HDMI/DP (/dev/input/event12)
[ 19.162] (II) No input driver/identifier specified (ignoring)
[ 19.162] (II) config/udev: Adding input device HDA NVidia HDMI/DP (/dev/input/event9)
[ 19.162] (II) No input driver/identifier specified (ignoring)
[ 19.162] (II) config/udev: Adding input device HOLTEK ROCCAT Kave Headset (/dev/input/event0)
[ 19.162] (**) HOLTEK ROCCAT Kave Headset: Applying InputClass "evdev keyboard catchall"
[ 19.162] (II) Using input driver 'evdev' for 'HOLTEK ROCCAT Kave Headset'
[ 19.162] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 19.162] Option "XkbRules" "evdev"
[ 19.162] Option "XkbModel" "evdev"
[ 19.162] Option "XkbLayout" "us"
[ 19.162] Option "_source" "server/udev"
[ 19.162] Option "name" "HOLTEK ROCCAT Kave Headset"
[ 19.162] Option "path" "/dev/input/event0"
[ 19.162] Option "device" "/dev/input/event0"
[ 19.162] Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:09.0/0000:02:00.0/usb1/1-1/1-1:1.0/input/input0/event0"
[ 19.162] Option "driver" "evdev"
[ 19.162] (**) HOLTEK ROCCAT Kave Headset: always reports core events
[ 19.162] (**) HOLTEK ROCCAT Kave Headset: Device: "/dev/input/event0"
[ 19.162] (--) HOLTEK ROCCAT Kave Headset: Found keys
[ 19.162] (II) HOLTEK ROCCAT Kave Headset: Configuring as keyboard
[ 19.162] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:09.0/0000:02:00.0/usb1/1-1/1-1:1.0/input/input0/event0"
[ 19.162] (II) XINPUT: Adding extended input device "HOLTEK ROCCAT Kave Headset" (type: KEYBOARD, id 8)
[ 19.162] (**) Option "xkb_rules" "evdev"
[ 19.162] (**) Option "xkb_model" "evdev"
[ 19.162] (**) Option "xkb_layout" "us"
[ 19.162] (II) XKB: Reusing cached keymap
[ 19.163] (II) config/udev: Adding input device Logitech USB Laser Mouse (/dev/input/event1)
[ 19.163] (**) Logitech USB Laser Mouse: Applying InputClass "evdev pointer catchall"
[ 19.163] (II) Using input driver 'evdev' for 'Logitech USB Laser Mouse'
[ 19.163] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 19.163] Option "XkbRules" "evdev"
[ 19.163] Option "XkbModel" "evdev"
[ 19.163] Option "XkbLayout" "us"
[ 19.163] Option "_source" "server/udev"
[ 19.163] Option "name" "Logitech USB Laser Mouse"
[ 19.163] Option "path" "/dev/input/event1"
[ 19.163] Option "device" "/dev/input/event1"
[ 19.163] Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.0/usb6/6-5/6-5:1.0/input/input1/event1"
[ 19.163] Option "driver" "evdev"
[ 19.163] (**) Logitech USB Laser Mouse: always reports core events
[ 19.163] (**) Logitech USB Laser Mouse: Device: "/dev/input/event1"
[ 19.163] (--) Logitech USB Laser Mouse: Found 12 mouse buttons
[ 19.163] (--) Logitech USB Laser Mouse: Found scroll wheel(s)
[ 19.163] (--) Logitech USB Laser Mouse: Found relative axes
[ 19.163] (--) Logitech USB Laser Mouse: Found x and y relative axes
[ 19.163] (II) Logitech USB Laser Mouse: Configuring as mouse
[ 19.163] (II) Logitech USB Laser Mouse: Adding scrollwheel support
[ 19.163] (**) Logitech USB Laser Mouse: YAxisMapping: buttons 4 and 5
[ 19.163] (**) Logitech USB Laser Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 19.163] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.0/usb6/6-5/6-5:1.0/input/input1/event1"
[ 19.163] (II) XINPUT: Adding extended input device "Logitech USB Laser Mouse" (type: MOUSE, id 9)
[ 19.163] (II) Logitech USB Laser Mouse: initialized for relative axes.
[ 19.163] (**) Logitech USB Laser Mouse: (accel) keeping acceleration scheme 1
[ 19.163] (**) Logitech USB Laser Mouse: (accel) acceleration profile 0
[ 19.163] (**) Logitech USB Laser Mouse: (accel) acceleration factor: 2.000
[ 19.163] (**) Logitech USB Laser Mouse: (accel) acceleration threshold: 4
[ 19.163] (II) config/udev: Adding input device Logitech USB Laser Mouse (/dev/input/mouse0)
[ 19.163] (II) No input driver/identifier specified (ignoring)
[ 19.163] (II) config/udev: Adding input device G15 Gaming Keyboard (/dev/input/event2)
[ 19.163] (**) G15 Gaming Keyboard: Applying InputClass "evdev keyboard catchall"
[ 19.163] (II) Using input driver 'evdev' for 'G15 Gaming Keyboard'
[ 19.163] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 19.163] Option "XkbRules" "evdev"
[ 19.163] Option "XkbModel" "evdev"
[ 19.163] Option "XkbLayout" "us"
[ 19.163] Option "_source" "server/udev"
[ 19.163] Option "name" "G15 Gaming Keyboard"
[ 19.163] Option "path" "/dev/input/event2"
[ 19.163] Option "device" "/dev/input/event2"
[ 19.163] Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:13.0/usb7/7-1/7-1.1/7-1.1:1.0/input/input2/event2"
[ 19.163] Option "driver" "evdev"
[ 19.163] (**) G15 Gaming Keyboard: always reports core events
[ 19.163] (**) G15 Gaming Keyboard: Device: "/dev/input/event2"
[ 19.163] (--) G15 Gaming Keyboard: Found keys
[ 19.163] (II) G15 Gaming Keyboard: Configuring as keyboard
[ 19.163] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:13.0/usb7/7-1/7-1.1/7-1.1:1.0/input/input2/event2"
[ 19.163] (II) XINPUT: Adding extended input device "G15 Gaming Keyboard" (type: KEYBOARD, id 10)
[ 19.163] (**) Option "xkb_rules" "evdev"
[ 19.163] (**) Option "xkb_model" "evdev"
[ 19.164] (**) Option "xkb_layout" "us"
[ 19.164] (II) XKB: Reusing cached keymap
[ 19.164] (II) config/udev: Adding input device G15 Gaming Keyboard (/dev/input/event3)
[ 19.164] (**) G15 Gaming Keyboard: Applying InputClass "evdev keyboard catchall"
[ 19.164] (II) Using input driver 'evdev' for 'G15 Gaming Keyboard'
[ 19.164] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 19.164] Option "XkbRules" "evdev"
[ 19.164] Option "XkbModel" "evdev"
[ 19.164] Option "XkbLayout" "us"
[ 19.164] Option "_source" "server/udev"
[ 19.164] Option "name" "G15 Gaming Keyboard"
[ 19.164] Option "path" "/dev/input/event3"
[ 19.164] Option "device" "/dev/input/event3"
[ 19.164] Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:13.0/usb7/7-1/7-1.1/7-1.1:1.1/input/input3/event3"
[ 19.164] Option "driver" "evdev"
[ 19.164] (**) G15 Gaming Keyboard: always reports core events
[ 19.164] (**) G15 Gaming Keyboard: Device: "/dev/input/event3"
[ 19.164] (--) G15 Gaming Keyboard: Found keys
[ 19.164] (II) G15 Gaming Keyboard: Configuring as keyboard
[ 19.164] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:13.0/usb7/7-1/7-1.1/7-1.1:1.1/input/input3/event3"
[ 19.164] (II) XINPUT: Adding extended input device "G15 Gaming Keyboard" (type: KEYBOARD, id 11)
[ 19.164] (**) Option "xkb_rules" "evdev"
[ 19.164] (**) Option "xkb_model" "evdev"
[ 19.164] (**) Option "xkb_layout" "us"
[ 19.164] (II) XKB: Reusing cached keymap
[ 19.164] (II) config/udev: Adding input device G15 GamePanel LCD (/dev/input/event4)
[ 19.164] (**) G15 GamePanel LCD: Applying InputClass "evdev keyboard catchall"
[ 19.164] (II) Using input driver 'evdev' for 'G15 GamePanel LCD'
[ 19.164] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 19.164] Option "XkbRules" "evdev"
[ 19.164] Option "XkbModel" "evdev"
[ 19.164] Option "XkbLayout" "us"
[ 19.164] Option "_source" "server/udev"
[ 19.164] Option "name" "G15 GamePanel LCD"
[ 19.164] Option "path" "/dev/input/event4"
[ 19.164] Option "device" "/dev/input/event4"
[ 19.164] Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:13.0/usb7/7-1/7-1.4/7-1.4:1.0/input/input4/event4"
[ 19.164] Option "driver" "evdev"
[ 19.164] (**) G15 GamePanel LCD: always reports core events
[ 19.164] (**) G15 GamePanel LCD: Device: "/dev/input/event4"
[ 19.164] (--) G15 GamePanel LCD: Found keys
[ 19.164] (II) G15 GamePanel LCD: Configuring as keyboard
[ 19.164] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:13.0/usb7/7-1/7-1.4/7-1.4:1.0/input/input4/event4"
[ 19.164] (II) XINPUT: Adding extended input device "G15 GamePanel LCD" (type: KEYBOARD, id 12)
[ 19.164] (**) Option "xkb_rules" "evdev"
[ 19.164] (**) Option "xkb_model" "evdev"
[ 19.164] (**) Option "xkb_layout" "us"
[ 19.164] (II) XKB: Reusing cached keymap
[ 19.165] (II) config/udev: Adding input device HDA ATI SB Headphone (/dev/input/event8)
[ 19.165] (II) No input driver/identifier specified (ignoring)
[ 19.165] (II) config/udev: Adding input device PC Speaker (/dev/input/event7)
[ 19.165] (II) No input driver/identifier specified (ignoring)
[ 19.273] (II) NOUVEAU(0): EDID vendor "HWP", prod id 10380
[ 19.273] (II) NOUVEAU(0): Using hsync ranges from config file
[ 19.273] (II) NOUVEAU(0): Using vrefresh ranges from config file
[ 19.273] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 19.273] (II) NOUVEAU(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz)
[ 19.273] (II) NOUVEAU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 19.273] (II) NOUVEAU(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 19.273] (II) NOUVEAU(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 19.273] (II) NOUVEAU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 19.273] (II) NOUVEAU(0): Modeline "1280x720"x60.0 74.48 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.8 kHz)
[ 19.274] (II) NOUVEAU(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
[ 19.274] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 19.274] (II) NOUVEAU(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz)
[ 19.274] (II) NOUVEAU(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz)
[ 19.274] (II) NOUVEAU(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
[ 19.274] (II) NOUVEAU(0): Modeline "1920x1080"x60.0 172.80 1920 2040 2248 2576 1080 1081 1084 1118 -hsync +vsync (67.1 kHz)
[ 23.028] (II) NOUVEAU(0): EDID vendor "HWP", prod id 10380
[ 23.028] (II) NOUVEAU(0): Using hsync ranges from config file
[ 23.028] (II) NOUVEAU(0): Using vrefresh ranges from config file
[ 23.028] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 23.028] (II) NOUVEAU(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz)
[ 23.028] (II) NOUVEAU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 23.028] (II) NOUVEAU(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 23.028] (II) NOUVEAU(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 23.028] (II) NOUVEAU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 23.028] (II) NOUVEAU(0): Modeline "1280x720"x60.0 74.48 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.8 kHz)
[ 23.028] (II) NOUVEAU(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
[ 23.028] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 23.028] (II) NOUVEAU(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz)
[ 23.028] (II) NOUVEAU(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz)
[ 23.029] (II) NOUVEAU(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
[ 23.029] (II) NOUVEAU(0): Modeline "1920x1080"x60.0 172.80 1920 2040 2248 2576 1080 1081 1084 1118 -hsync +vsync (67.1 kHz)
[ 23.475] (II) NOUVEAU(0): EDID vendor "HWP", prod id 10380
[ 23.475] (II) NOUVEAU(0): Using hsync ranges from config file
[ 23.475] (II) NOUVEAU(0): Using vrefresh ranges from config file
[ 23.475] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 23.475] (II) NOUVEAU(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz)
[ 23.475] (II) NOUVEAU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 23.475] (II) NOUVEAU(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 23.475] (II) NOUVEAU(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 23.475] (II) NOUVEAU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 23.475] (II) NOUVEAU(0): Modeline "1280x720"x60.0 74.48 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.8 kHz)
[ 23.475] (II) NOUVEAU(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
[ 23.475] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 23.475] (II) NOUVEAU(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz)
[ 23.475] (II) NOUVEAU(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz)
[ 23.475] (II) NOUVEAU(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
[ 23.475] (II) NOUVEAU(0): Modeline "1920x1080"x60.0 172.80 1920 2040 2248 2576 1080 1081 1084 1118 -hsync +vsync (67.1 kHz)
[ 23.798] (II) NOUVEAU(0): EDID vendor "HWP", prod id 10380
[ 23.798] (II) NOUVEAU(0): Using hsync ranges from config file
[ 23.798] (II) NOUVEAU(0): Using vrefresh ranges from config file
[ 23.798] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 23.798] (II) NOUVEAU(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz)
[ 23.798] (II) NOUVEAU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 23.798] (II) NOUVEAU(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 23.798] (II) NOUVEAU(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 23.798] (II) NOUVEAU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 23.798] (II) NOUVEAU(0): Modeline "1280x720"x60.0 74.48 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.8 kHz)
[ 23.798] (II) NOUVEAU(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
[ 23.798] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 23.798] (II) NOUVEAU(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz)
[ 23.798] (II) NOUVEAU(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz)
[ 23.798] (II) NOUVEAU(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
[ 23.798] (II) NOUVEAU(0): Modeline "1920x1080"x60.0 172.80 1920 2040 2248 2576 1080 1081 1084 1118 -hsync +vsync (67.1 kHz)
[ 24.152] (II) NOUVEAU(0): EDID vendor "HWP", prod id 10380
[ 24.152] (II) NOUVEAU(0): Using hsync ranges from config file
[ 24.152] (II) NOUVEAU(0): Using vrefresh ranges from config file
[ 24.152] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 24.152] (II) NOUVEAU(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz)
[ 24.152] (II) NOUVEAU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 24.152] (II) NOUVEAU(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 24.152] (II) NOUVEAU(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 24.152] (II) NOUVEAU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 24.152] (II) NOUVEAU(0): Modeline "1280x720"x60.0 74.48 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.8 kHz)
[ 24.152] (II) NOUVEAU(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
[ 24.153] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 24.153] (II) NOUVEAU(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz)
[ 24.153] (II) NOUVEAU(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz)
[ 24.153] (II) NOUVEAU(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
[ 24.153] (II) NOUVEAU(0): Modeline "1920x1080"x60.0 172.80 1920 2040 2248 2576 1080 1081 1084 1118 -hsync +vsync (67.1 kHz)
[ 24.476] (II) NOUVEAU(0): EDID vendor "HWP", prod id 10380
[ 24.476] (II) NOUVEAU(0): Using hsync ranges from config file
[ 24.476] (II) NOUVEAU(0): Using vrefresh ranges from config file
[ 24.476] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 24.476] (II) NOUVEAU(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz)
[ 24.476] (II) NOUVEAU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 24.476] (II) NOUVEAU(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 24.476] (II) NOUVEAU(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 24.476] (II) NOUVEAU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 24.476] (II) NOUVEAU(0): Modeline "1280x720"x60.0 74.48 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.8 kHz)
[ 24.476] (II) NOUVEAU(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
[ 24.476] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 24.476] (II) NOUVEAU(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz)
[ 24.476] (II) NOUVEAU(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz)
[ 24.476] (II) NOUVEAU(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
[ 24.476] (II) NOUVEAU(0): Modeline "1920x1080"x60.0 172.80 1920 2040 2248 2576 1080 1081 1084 1118 -hsync +vsync (67.1 kHz)
[ 32.123] (II) NOUVEAU(0): EDID vendor "HWP", prod id 10380
[ 32.123] (II) NOUVEAU(0): Using hsync ranges from config file
[ 32.123] (II) NOUVEAU(0): Using vrefresh ranges from config file
[ 32.123] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 32.123] (II) NOUVEAU(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz)
[ 32.123] (II) NOUVEAU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 32.123] (II) NOUVEAU(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 32.123] (II) NOUVEAU(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 32.123] (II) NOUVEAU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 32.123] (II) NOUVEAU(0): Modeline "1280x720"x60.0 74.48 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.8 kHz)
[ 32.123] (II) NOUVEAU(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
[ 32.123] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 32.123] (II) NOUVEAU(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz)
[ 32.123] (II) NOUVEAU(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz)
[ 32.123] (II) NOUVEAU(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
[ 32.123] (II) NOUVEAU(0): Modeline "1920x1080"x60.0 172.80 1920 2040 2248 2576 1080 1081 1084 1118 -hsync +vsync (67.1 kHz)
[ 32.473] (II) NOUVEAU(0): EDID vendor "HWP", prod id 10380
[ 32.474] (II) NOUVEAU(0): Using hsync ranges from config file
[ 32.474] (II) NOUVEAU(0): Using vrefresh ranges from config file
[ 32.474] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 32.474] (II) NOUVEAU(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz)
[ 32.474] (II) NOUVEAU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 32.474] (II) NOUVEAU(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 32.474] (II) NOUVEAU(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 32.474] (II) NOUVEAU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 32.474] (II) NOUVEAU(0): Modeline "1280x720"x60.0 74.48 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.8 kHz)
[ 32.474] (II) NOUVEAU(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
[ 32.474] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 32.474] (II) NOUVEAU(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz)
[ 32.474] (II) NOUVEAU(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz)
[ 32.474] (II) NOUVEAU(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
[ 32.474] (II) NOUVEAU(0): Modeline "1920x1080"x60.0 172.80 1920 2040 2248 2576 1080 1081 1084 1118 -hsync +vsync (67.1 kHz)
[ 32.797] (II) NOUVEAU(0): EDID vendor "HWP", prod id 10380
[ 32.797] (II) NOUVEAU(0): Using hsync ranges from config file
[ 32.797] (II) NOUVEAU(0): Using vrefresh ranges from config file
[ 32.797] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 32.797] (II) NOUVEAU(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz)
[ 32.797] (II) NOUVEAU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 32.797] (II) NOUVEAU(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 32.797] (II) NOUVEAU(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 32.797] (II) NOUVEAU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 32.797] (II) NOUVEAU(0): Modeline "1280x720"x60.0 74.48 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.8 kHz)
[ 32.797] (II) NOUVEAU(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
[ 32.798] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 32.798] (II) NOUVEAU(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz)
[ 32.798] (II) NOUVEAU(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz)
[ 32.798] (II) NOUVEAU(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
[ 32.798] (II) NOUVEAU(0): Modeline "1920x1080"x60.0 172.80 1920 2040 2248 2576 1080 1081 1084 1118 -hsync +vsync (67.1 kHz)
[ 33.120] (II) NOUVEAU(0): EDID vendor "HWP", prod id 10380
[ 33.121] (II) NOUVEAU(0): Using hsync ranges from config file
[ 33.121] (II) NOUVEAU(0): Using vrefresh ranges from config file
[ 33.121] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 33.121] (II) NOUVEAU(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz)
[ 33.121] (II) NOUVEAU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 33.121] (II) NOUVEAU(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 33.121] (II) NOUVEAU(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 33.121] (II) NOUVEAU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 33.121] (II) NOUVEAU(0): Modeline "1280x720"x60.0 74.48 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.8 kHz)
[ 33.121] (II) NOUVEAU(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
[ 33.121] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 33.121] (II) NOUVEAU(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz)
[ 33.121] (II) NOUVEAU(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz)
[ 33.121] (II) NOUVEAU(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
[ 33.121] (II) NOUVEAU(0): Modeline "1920x1080"x60.0 172.80 1920 2040 2248 2576 1080 1081 1084 1118 -hsync +vsync (67.1 kHz)
[ 33.444] (II) NOUVEAU(0): EDID vendor "HWP", prod id 10380
[ 33.444] (II) NOUVEAU(0): Using hsync ranges from config file
[ 33.444] (II) NOUVEAU(0): Using vrefresh ranges from config file
[ 33.444] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 33.444] (II) NOUVEAU(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz)
[ 33.444] (II) NOUVEAU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 33.444] (II) NOUVEAU(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 33.444] (II) NOUVEAU(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 33.444] (II) NOUVEAU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 33.444] (II) NOUVEAU(0): Modeline "1280x720"x60.0 74.48 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.8 kHz)
[ 33.444] (II) NOUVEAU(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
[ 33.444] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 33.444] (II) NOUVEAU(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz)
[ 33.444] (II) NOUVEAU(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz)
[ 33.444] (II) NOUVEAU(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
[ 33.444] (II) NOUVEAU(0): Modeline "1920x1080"x60.0 172.80 1920 2040 2248 2576 1080 1081 1084 1118 -hsync +vsync (67.1 kHz)
[ 33.767] (II) NOUVEAU(0): EDID vendor "HWP", prod id 10380
[ 33.767] (II) NOUVEAU(0): Using hsync ranges from config file
[ 33.768] (II) NOUVEAU(0): Using vrefresh ranges from config file
[ 33.768] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 33.768] (II) NOUVEAU(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz)
[ 33.768] (II) NOUVEAU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 33.768] (II) NOUVEAU(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 33.768] (II) NOUVEAU(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 33.768] (II) NOUVEAU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 33.768] (II) NOUVEAU(0): Modeline "1280x720"x60.0 74.48 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.8 kHz)
[ 33.768] (II) NOUVEAU(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
[ 33.768] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 33.768] (II) NOUVEAU(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz)
[ 33.768] (II) NOUVEAU(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz)
[ 33.768] (II) NOUVEAU(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
[ 33.768] (II) NOUVEAU(0): Modeline "1920x1080"x60.0 172.80 1920 2040 2248 2576 1080 1081 1084 1118 -hsync +vsync (67.1 kHz)
[ 37.760] (II) NOUVEAU(0): EDID vendor "HWP", prod id 10380
[ 37.760] (II) NOUVEAU(0): Using hsync ranges from config file
[ 37.760] (II) NOUVEAU(0): Using vrefresh ranges from config file
[ 37.760] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 37.760] (II) NOUVEAU(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz)
[ 37.760] (II) NOUVEAU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 37.760] (II) NOUVEAU(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 37.760] (II) NOUVEAU(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 37.760] (II) NOUVEAU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 37.760] (II) NOUVEAU(0): Modeline "1280x720"x60.0 74.48 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.8 kHz)
[ 37.760] (II) NOUVEAU(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
[ 37.760] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 37.760] (II) NOUVEAU(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz)
[ 37.760] (II) NOUVEAU(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz)
[ 37.760] (II) NOUVEAU(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
[ 37.760] (II) NOUVEAU(0): Modeline "1920x1080"x60.0 172.80 1920 2040 2248 2576 1080 1081 1084 1118 -hsync +vsync (67.1 kHz)
[ 42.944] (II) NOUVEAU(0): EDID vendor "HWP", prod id 10380
[ 42.944] (II) NOUVEAU(0): Using hsync ranges from config file
[ 42.944] (II) NOUVEAU(0): Using vrefresh ranges from config file
[ 42.944] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 42.944] (II) NOUVEAU(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz)
[ 42.944] (II) NOUVEAU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 42.944] (II) NOUVEAU(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 42.944] (II) NOUVEAU(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 42.944] (II) NOUVEAU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 42.944] (II) NOUVEAU(0): Modeline "1280x720"x60.0 74.48 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.8 kHz)
[ 42.944] (II) NOUVEAU(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
[ 42.944] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 42.944] (II) NOUVEAU(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz)
[ 42.944] (II) NOUVEAU(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz)
[ 42.944] (II) NOUVEAU(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
[ 42.944] (II) NOUVEAU(0): Modeline "1920x1080"x60.0 172.80 1920 2040 2248 2576 1080 1081 1084 1118 -hsync +vsync (67.1 kHz)
[ 669.049] (II) NOUVEAU(0): EDID vendor "HWP", prod id 10380
[ 669.049] (II) NOUVEAU(0): Using hsync ranges from config file
[ 669.049] (II) NOUVEAU(0): Using vrefresh ranges from config file
[ 669.049] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 669.049] (II) NOUVEAU(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz)
[ 669.049] (II) NOUVEAU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 669.049] (II) NOUVEAU(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 669.049] (II) NOUVEAU(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 669.049] (II) NOUVEAU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 669.049] (II) NOUVEAU(0): Modeline "1280x720"x60.0 74.48 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.8 kHz)
[ 669.049] (II) NOUVEAU(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
[ 669.049] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 669.049] (II) NOUVEAU(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz)
[ 669.049] (II) NOUVEAU(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz)
[ 669.049] (II) NOUVEAU(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
[ 669.049] (II) NOUVEAU(0): Modeline "1920x1080"x60.0 172.80 1920 2040 2248 2576 1080 1081 1084 1118 -hsync +vsync (67.1 kHz)And after i reboot after insatlling nvidia, the fallback dosnt even boot and i get "maximum number of x server failures reached"
Tea, Earl Grey, hot
Offline
#7 2011-10-22 18:08:04
- Gusar
- Member
- Registered: 2009-08-25
- Posts: 3,605
Re: [SOLVED] Arch Linux GNOME3 stuck in fallback, nvidia drivers wont work
Err, that log shows nouveau. We want to know what goes wrong with nvidia. So post a log with the nvidia driver.
Offline
#8 2011-10-22 18:09:10
- wonder
- Developer
- From: Bucharest, Romania
- Registered: 2006-07-05
- Posts: 5,941
- Website
Re: [SOLVED] Arch Linux GNOME3 stuck in fallback, nvidia drivers wont work
is this log after a reboot? because still tries to use nouveau, which means that nouveau is in the initrd.
paste bsdtar -t -f /boot/initramfs-linux.img
Give what you have. To someone, it may be better than you dare to think.
Offline
#9 2011-10-22 18:54:09
- JazzPotato
- Member
- Registered: 2011-10-22
- Posts: 39
Re: [SOLVED] Arch Linux GNOME3 stuck in fallback, nvidia drivers wont work
[ 17.121]
X.Org X Server 1.11.1
Release Date: 2011-09-24
[ 17.121] X Protocol Version 11, Revision 0
[ 17.121] Build Operating System: Linux 3.0-ARCH x86_64
[ 17.121] Current Operating System: Linux glcheetham 3.0-ARCH #1 SMP PREEMPT Wed Oct 19 10:27:51 CEST 2011 x86_64
[ 17.121] Kernel command line: root=/dev/disk/by-uuid/cceac501-2796-4d39-8225-496c69831f94 ro
[ 17.121] Build Date: 10 October 2011 08:55:30AM
[ 17.121]
[ 17.121] Current version of pixman: 0.22.2
[ 17.121] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 17.121] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 17.121] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Oct 22 19:32:16 2011
[ 17.143] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 17.179] (==) No Layout section. Using the first Screen section.
[ 17.179] (==) No screen section available. Using defaults.
[ 17.179] (**) |-->Screen "Default Screen Section" (0)
[ 17.179] (**) | |-->Monitor "<default monitor>"
[ 17.180] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[ 17.180] (**) | |-->Device "Nvidia card"
[ 17.180] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 17.180] (==) Automatically adding devices
[ 17.180] (==) Automatically enabling devices
[ 17.231] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 17.231] Entry deleted from font path.
[ 17.252] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 17.252] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 17.252] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 17.252] (II) Loader magic: 0x7ccae0
[ 17.252] (II) Module ABI versions:
[ 17.252] X.Org ANSI C Emulation: 0.4
[ 17.252] X.Org Video Driver: 11.0
[ 17.252] X.Org XInput driver : 13.0
[ 17.252] X.Org Server Extension : 6.0
[ 17.253] (--) PCI:*(0:1:0:0) 10de:06c4:10de:0839 rev 163, Mem @ 0xf8000000/33554432, 0xd0000000/134217728, 0xdc000000/67108864, I/O @ 0x0000ef00/128, BIOS @ 0x????????/524288
[ 17.253] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 17.253] (II) LoadModule: "extmod"
[ 17.270] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 17.281] (II) Module extmod: vendor="X.Org Foundation"
[ 17.281] compiled for 1.11.1, module version = 1.0.0
[ 17.281] Module class: X.Org Server Extension
[ 17.281] ABI class: X.Org Server Extension, version 6.0
[ 17.281] (II) Loading extension MIT-SCREEN-SAVER
[ 17.281] (II) Loading extension XFree86-VidModeExtension
[ 17.281] (II) Loading extension XFree86-DGA
[ 17.281] (II) Loading extension DPMS
[ 17.281] (II) Loading extension XVideo
[ 17.281] (II) Loading extension XVideo-MotionCompensation
[ 17.281] (II) Loading extension X-Resource
[ 17.281] (II) LoadModule: "dbe"
[ 17.282] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 17.282] (II) Module dbe: vendor="X.Org Foundation"
[ 17.282] compiled for 1.11.1, module version = 1.0.0
[ 17.282] Module class: X.Org Server Extension
[ 17.282] ABI class: X.Org Server Extension, version 6.0
[ 17.282] (II) Loading extension DOUBLE-BUFFER
[ 17.282] (II) LoadModule: "glx"
[ 17.282] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 17.737] (II) Module glx: vendor="NVIDIA Corporation"
[ 17.746] compiled for 4.0.2, module version = 1.0.0
[ 17.746] Module class: X.Org Server Extension
[ 17.746] (II) NVIDIA GLX Module 285.05.09 Fri Sep 23 17:51:24 PDT 2011
[ 17.746] (II) Loading extension GLX
[ 17.746] (II) LoadModule: "record"
[ 17.746] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 17.757] (II) Module record: vendor="X.Org Foundation"
[ 17.757] compiled for 1.11.1, module version = 1.13.0
[ 17.757] Module class: X.Org Server Extension
[ 17.757] ABI class: X.Org Server Extension, version 6.0
[ 17.757] (II) Loading extension RECORD
[ 17.757] (II) LoadModule: "dri"
[ 17.757] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 17.763] (II) Module dri: vendor="X.Org Foundation"
[ 17.763] compiled for 1.11.1, module version = 1.0.0
[ 17.763] ABI class: X.Org Server Extension, version 6.0
[ 17.763] (II) Loading extension XFree86-DRI
[ 17.763] (II) LoadModule: "dri2"
[ 17.763] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 17.763] (II) Module dri2: vendor="X.Org Foundation"
[ 17.763] compiled for 1.11.1, module version = 1.2.0
[ 17.763] ABI class: X.Org Server Extension, version 6.0
[ 17.763] (II) Loading extension DRI2
[ 17.763] (II) LoadModule: "nouveau"
[ 17.808] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[ 17.815] (II) Module nouveau: vendor="X.Org Foundation"
[ 17.815] compiled for 1.11.0, module version = 0.0.16
[ 17.815] Module class: X.Org Video Driver
[ 17.815] ABI class: X.Org Video Driver, version 11.0
[ 17.815] (II) NOUVEAU driver
[ 17.815] (II) NOUVEAU driver for NVIDIA chipset families :
[ 17.815] RIVA TNT (NV04)
[ 17.815] RIVA TNT2 (NV05)
[ 17.815] GeForce 256 (NV10)
[ 17.815] GeForce 2 (NV11, NV15)
[ 17.815] GeForce 4MX (NV17, NV18)
[ 17.815] GeForce 3 (NV20)
[ 17.815] GeForce 4Ti (NV25, NV28)
[ 17.815] GeForce FX (NV3x)
[ 17.815] GeForce 6 (NV4x)
[ 17.815] GeForce 7 (G7x)
[ 17.815] GeForce 8 (G8x)
[ 17.815] GeForce GTX 200 (NVA0)
[ 17.815] GeForce GTX 400 (NVC0)
[ 17.815] (++) using VT number 7
[ 17.828] drmOpenDevice: node name is /dev/dri/card0
[ 17.909] drmOpenByBusid: Searching for BusID pci:0000:01:00.0
[ 17.909] drmOpenDevice: node name is /dev/dri/card0
[ 17.913] drmOpenByBusid: drmOpenMinor returns -1
[ 17.913] drmOpenDevice: node name is /dev/dri/card1
[ 17.917] drmOpenByBusid: drmOpenMinor returns -1
[ 17.917] drmOpenDevice: node name is /dev/dri/card2
[ 17.921] drmOpenByBusid: drmOpenMinor returns -1
[ 17.921] drmOpenDevice: node name is /dev/dri/card3
[ 17.924] drmOpenByBusid: drmOpenMinor returns -1
[ 17.924] drmOpenDevice: node name is /dev/dri/card4
[ 17.928] drmOpenByBusid: drmOpenMinor returns -1
[ 17.928] drmOpenDevice: node name is /dev/dri/card5
[ 17.932] drmOpenByBusid: drmOpenMinor returns -1
[ 17.932] drmOpenDevice: node name is /dev/dri/card6
[ 17.936] drmOpenByBusid: drmOpenMinor returns -1
[ 17.936] drmOpenDevice: node name is /dev/dri/card7
[ 17.940] drmOpenByBusid: drmOpenMinor returns -1
[ 17.940] drmOpenDevice: node name is /dev/dri/card8
[ 17.943] drmOpenByBusid: drmOpenMinor returns -1
[ 17.943] drmOpenDevice: node name is /dev/dri/card9
[ 17.947] drmOpenByBusid: drmOpenMinor returns -1
[ 17.947] drmOpenDevice: node name is /dev/dri/card10
[ 17.951] drmOpenByBusid: drmOpenMinor returns -1
[ 17.951] drmOpenDevice: node name is /dev/dri/card11
[ 17.955] drmOpenByBusid: drmOpenMinor returns -1
[ 17.955] drmOpenDevice: node name is /dev/dri/card12
[ 17.958] drmOpenByBusid: drmOpenMinor returns -1
[ 17.958] drmOpenDevice: node name is /dev/dri/card13
[ 17.962] drmOpenByBusid: drmOpenMinor returns -1
[ 17.962] drmOpenDevice: node name is /dev/dri/card14
[ 17.966] drmOpenByBusid: drmOpenMinor returns -1
[ 17.966] drmOpenDevice: node name is /dev/dri/card15
[ 17.970] drmOpenByBusid: drmOpenMinor returns -1
[ 17.970] drmOpenDevice: node name is /dev/dri/card0
[ 17.975] drmOpenDevice: node name is /dev/dri/card0
[ 17.979] drmOpenDevice: node name is /dev/dri/card1
[ 17.982] drmOpenDevice: node name is /dev/dri/card2
[ 17.986] drmOpenDevice: node name is /dev/dri/card3
[ 17.990] drmOpenDevice: node name is /dev/dri/card4
[ 17.994] drmOpenDevice: node name is /dev/dri/card5
[ 17.998] drmOpenDevice: node name is /dev/dri/card6
[ 18.001] drmOpenDevice: node name is /dev/dri/card7
[ 18.005] drmOpenDevice: node name is /dev/dri/card8
[ 18.009] drmOpenDevice: node name is /dev/dri/card9
[ 18.013] drmOpenDevice: node name is /dev/dri/card10
[ 18.017] drmOpenDevice: node name is /dev/dri/card11
[ 18.020] drmOpenDevice: node name is /dev/dri/card12
[ 18.024] drmOpenDevice: node name is /dev/dri/card13
[ 18.028] drmOpenDevice: node name is /dev/dri/card14
[ 18.032] drmOpenDevice: node name is /dev/dri/card15
[ 18.036] (EE) [drm] failed to open device
[ 18.036] (EE) No devices detected.
[ 18.036]
Fatal server error:
[ 18.036] no screens found
[ 18.036]
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 18.036] Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 18.036] here is the log for nvidia drivers on startup (i think)
Tea, Earl Grey, hot
Offline
#10 2011-10-22 18:57:01
- Gusar
- Member
- Registered: 2009-08-25
- Posts: 3,605
Re: [SOLVED] Arch Linux GNOME3 stuck in fallback, nvidia drivers wont work
You still have nouveau installed. Uninstall it. Come on, reading the log is not that hard. You can clearly see the nvidia driver loads, but then the nouveau does also, causing a conflict.
Last edited by Gusar (2011-10-22 18:57:39)
Offline
#11 2011-10-22 18:57:35
- karol
- Archivist
- Registered: 2009-05-06
- Posts: 25,440
Re: [SOLVED] Arch Linux GNOME3 stuck in fallback, nvidia drivers wont work
Have you completely removed nouveau? Do you still somehow have xf86-video-nouveau installed?
Is nouveau blacklisted? - post the output of 'ls /etc/modprobe.d/'.
Offline
#12 2011-10-22 18:59:10
- JazzPotato
- Member
- Registered: 2011-10-22
- Posts: 39
Re: [SOLVED] Arch Linux GNOME3 stuck in fallback, nvidia drivers wont work
I need nouveau to get into fallback, with the nvidia drivers i get an xserver error and no gui, but ill try anyway
Tea, Earl Grey, hot
Offline
#13 2011-10-22 19:01:43
- JazzPotato
- Member
- Registered: 2011-10-22
- Posts: 39
Re: [SOLVED] Arch Linux GNOME3 stuck in fallback, nvidia drivers wont work
wonder wrote:
is this log after a reboot? because still tries to use nouveau, which means that nouveau is in the initrd.
paste bsdtar -t -f /boot/initramfs-linux.img
here is that, before i get rid of nouveau
./sbin
./sbin/udevadm
./sbin/blkid
./sbin/udevd
./sbin/modprobe
./run
./dev
./usr
./usr/sbin
./usr/bin
./sys
./config
./lib
./lib/libblkid.so.1
./lib/libpthread-2.14.so
./lib/ld-2.14.so
./lib/librt-2.14.so
./lib/libpthread.so.0
./lib/librt.so.1
./lib/libuuid.so.1.3.0
./lib/modprobe.d
./lib/modprobe.d/usb-load-ehci-first.conf
./lib/ld-linux-x86-64.so.2
./lib/libblkid.so.1.1.0
./lib/udev
./lib/udev/ata_id
./lib/udev/rules.d
./lib/udev/rules.d/50-udev-default.rules
./lib/udev/rules.d/50-firmware.rules
./lib/udev/rules.d/80-drivers.rules
./lib/udev/rules.d/60-persistent-storage.rules
./lib/udev/usb_id
./lib/udev/firmware
./lib/udev/path_id
./lib/udev/scsi_id
./lib/libc-2.14.so
./lib/libuuid.so.1
./lib/modules
./lib/modules/3.0-ARCH
./lib/modules/3.0-ARCH/kernel
./lib/modules/3.0-ARCH/kernel/lib
./lib/modules/3.0-ARCH/kernel/lib/crc16.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers
./lib/modules/3.0-ARCH/kernel/drivers/input
./lib/modules/3.0-ARCH/kernel/drivers/input/ff-memless.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/scsi
./lib/modules/3.0-ARCH/kernel/drivers/scsi/scsi_mod.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/scsi/sd_mod.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/scsi/sr_mod.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/video
./lib/modules/3.0-ARCH/kernel/drivers/video/sysimgblt.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/video/backlight
./lib/modules/3.0-ARCH/kernel/drivers/video/backlight/lcd.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/video/syscopyarea.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/video/fb_sys_fops.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/video/sysfillrect.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/cdrom
./lib/modules/3.0-ARCH/kernel/drivers/cdrom/cdrom.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/usb
./lib/modules/3.0-ARCH/kernel/drivers/usb/host
./lib/modules/3.0-ARCH/kernel/drivers/usb/host/ehci-hcd.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/usb/host/xhci-hcd.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/usb/host/ohci-hcd.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/usb/core
./lib/modules/3.0-ARCH/kernel/drivers/usb/core/usbcore.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/ata
./lib/modules/3.0-ARCH/kernel/drivers/ata/ahci.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/ata/libata.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/ata/pata_jmicron.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/ata/pata_acpi.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/ata/libahci.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/ata/pata_atiixp.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-apple.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-roccat-koneplus.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-chicony.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-ezkey.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-quanta.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-dr.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-zpff.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-sunplus.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-petalynx.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-roccat-kovaplus.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-twinhan.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-roccat-kone.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-multitouch.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-elecom.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-monterey.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-roccat-arvo.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-sjoy.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-kye.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-axff.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-a4tech.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-pl.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-ortek.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-zydacron.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-sony.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-wacom.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-gaff.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-waltop.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-topseed.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-roccat-common.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/usbhid
./lib/modules/3.0-ARCH/kernel/drivers/hid/usbhid/usbhid.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-roccat.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-uclogic.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-cypress.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-gyration.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-magicmouse.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-prodikeys.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-logitech.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-picolcd.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-keytouch.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-cherry.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-roccat-pyra.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-lcpower.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-ntrig.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-microsoft.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-tmff.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-emsff.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-belkin.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-samsung.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-kensington.ko.gz
./lib/modules/3.0-ARCH/kernel/sound
./lib/modules/3.0-ARCH/kernel/sound/soundcore.ko.gz
./lib/modules/3.0-ARCH/kernel/sound/core
./lib/modules/3.0-ARCH/kernel/sound/core/snd-rawmidi.ko.gz
./lib/modules/3.0-ARCH/kernel/sound/core/snd.ko.gz
./lib/modules/3.0-ARCH/kernel/sound/core/seq
./lib/modules/3.0-ARCH/kernel/sound/core/seq/snd-seq-device.ko.gz
./lib/modules/3.0-ARCH/kernel/fs
./lib/modules/3.0-ARCH/kernel/fs/mbcache.ko.gz
./lib/modules/3.0-ARCH/kernel/fs/ext4
./lib/modules/3.0-ARCH/kernel/fs/ext4/ext4.ko.gz
./lib/modules/3.0-ARCH/kernel/fs/jbd2
./lib/modules/3.0-ARCH/kernel/fs/jbd2/jbd2.ko.gz
./lib/modules/3.0-ARCH/modules.alias.bin
./lib/modules/3.0-ARCH/modules.symbols.bin
./lib/modules/3.0-ARCH/modules.dep.bin
./lib/libc.so.6
./proc
./etc
./etc/udev
./etc/udev/udev.conf
./init_functions
./bin
./bin/busybox
./init
./hooks
./hooks/udevTea, Earl Grey, hot
Offline
#14 2011-10-22 19:07:31
- wonder
- Developer
- From: Bucharest, Romania
- Registered: 2006-07-05
- Posts: 5,941
- Website
Re: [SOLVED] Arch Linux GNOME3 stuck in fallback, nvidia drivers wont work
that looks ok. be sure you reboot after installing nvidia
Give what you have. To someone, it may be better than you dare to think.
Offline
#15 2011-10-22 19:20:14
- JazzPotato
- Member
- Registered: 2011-10-22
- Posts: 39
Re: [SOLVED] Arch Linux GNOME3 stuck in fallback, nvidia drivers wont work
Alas! I still get "maximum number of x display failures reached"
This is the output of the log file:
[ 17.586]
X.Org X Server 1.11.1
Release Date: 2011-09-24
[ 17.586] X Protocol Version 11, Revision 0
[ 17.586] Build Operating System: Linux 3.0-ARCH x86_64
[ 17.586] Current Operating System: Linux glcheetham 3.0-ARCH #1 SMP PREEMPT Wed Oct 19 10:27:51 CEST 2011 x86_64
[ 17.586] Kernel command line: root=/dev/disk/by-uuid/cceac501-2796-4d39-8225-496c69831f94 ro
[ 17.586] Build Date: 10 October 2011 08:55:30AM
[ 17.586]
[ 17.586] Current version of pixman: 0.22.2
[ 17.586] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 17.586] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 17.586] (==) Log file: "/var/log/Xorg.1.log", Time: Sat Oct 22 20:11:12 2011
[ 17.586] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 17.586] (==) No Layout section. Using the first Screen section.
[ 17.586] (==) No screen section available. Using defaults.
[ 17.586] (**) |-->Screen "Default Screen Section" (0)
[ 17.586] (**) | |-->Monitor "<default monitor>"
[ 17.586] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[ 17.586] (**) | |-->Device "Nvidia card"
[ 17.586] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 17.586] (==) Automatically adding devices
[ 17.586] (==) Automatically enabling devices
[ 17.586] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 17.586] Entry deleted from font path.
[ 17.586] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 17.586] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 17.586] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 17.586] (II) Loader magic: 0x7ccae0
[ 17.586] (II) Module ABI versions:
[ 17.586] X.Org ANSI C Emulation: 0.4
[ 17.586] X.Org Video Driver: 11.0
[ 17.586] X.Org XInput driver : 13.0
[ 17.586] X.Org Server Extension : 6.0
[ 17.587] (--) PCI:*(0:1:0:0) 10de:06c4:10de:0839 rev 163, Mem @ 0xf8000000/33554432, 0xd0000000/134217728, 0xdc000000/67108864, I/O @ 0x0000ef00/128, BIOS @ 0x????????/524288
[ 17.587] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 17.587] (II) LoadModule: "extmod"
[ 17.587] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 17.587] (II) Module extmod: vendor="X.Org Foundation"
[ 17.587] compiled for 1.11.1, module version = 1.0.0
[ 17.587] Module class: X.Org Server Extension
[ 17.587] ABI class: X.Org Server Extension, version 6.0
[ 17.587] (II) Loading extension MIT-SCREEN-SAVER
[ 17.587] (II) Loading extension XFree86-VidModeExtension
[ 17.587] (II) Loading extension XFree86-DGA
[ 17.587] (II) Loading extension DPMS
[ 17.587] (II) Loading extension XVideo
[ 17.587] (II) Loading extension XVideo-MotionCompensation
[ 17.587] (II) Loading extension X-Resource
[ 17.587] (II) LoadModule: "dbe"
[ 17.587] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 17.587] (II) Module dbe: vendor="X.Org Foundation"
[ 17.587] compiled for 1.11.1, module version = 1.0.0
[ 17.587] Module class: X.Org Server Extension
[ 17.587] ABI class: X.Org Server Extension, version 6.0
[ 17.587] (II) Loading extension DOUBLE-BUFFER
[ 17.587] (II) LoadModule: "glx"
[ 17.588] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 17.597] (II) Module glx: vendor="NVIDIA Corporation"
[ 17.597] compiled for 4.0.2, module version = 1.0.0
[ 17.597] Module class: X.Org Server Extension
[ 17.597] (II) NVIDIA GLX Module 285.05.09 Fri Sep 23 17:51:24 PDT 2011
[ 17.597] (II) Loading extension GLX
[ 17.597] (II) LoadModule: "record"
[ 17.597] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 17.597] (II) Module record: vendor="X.Org Foundation"
[ 17.597] compiled for 1.11.1, module version = 1.13.0
[ 17.597] Module class: X.Org Server Extension
[ 17.597] ABI class: X.Org Server Extension, version 6.0
[ 17.597] (II) Loading extension RECORD
[ 17.597] (II) LoadModule: "dri"
[ 17.597] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 17.597] (II) Module dri: vendor="X.Org Foundation"
[ 17.597] compiled for 1.11.1, module version = 1.0.0
[ 17.597] ABI class: X.Org Server Extension, version 6.0
[ 17.597] (II) Loading extension XFree86-DRI
[ 17.597] (II) LoadModule: "dri2"
[ 17.597] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 17.598] (II) Module dri2: vendor="X.Org Foundation"
[ 17.598] compiled for 1.11.1, module version = 1.2.0
[ 17.598] ABI class: X.Org Server Extension, version 6.0
[ 17.598] (II) Loading extension DRI2
[ 17.598] (II) LoadModule: "nouveau"
[ 17.598] (WW) Warning, couldn't open module nouveau
[ 17.598] (II) UnloadModule: "nouveau"
[ 17.598] (II) Unloading nouveau
[ 17.598] (EE) Failed to load module "nouveau" (module does not exist, 0)
[ 17.598] (EE) No drivers available.
[ 17.598]
Fatal server error:
[ 17.598] no screens found
[ 17.598]
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 17.598] Please also check the log file at "/var/log/Xorg.1.log" for additional information.
[ 17.598] However, i think i now know why im not having any luck:
"[ 17.598] (II) LoadModule: "nouveau"
[ 17.598] (WW) Warning, couldn't open module nouveau
[ 17.598] (II) UnloadModule: "nouveau"
[ 17.598] (II) Unloading nouveau
[ 17.598] (EE) Failed to load module "nouveau" (module does not exist, 0)
[ 17.598] (EE) No drivers available."
Its trying to load the module nouveau when its not there. And i told it to do that in one of my attempts to fix it :-). I've forgotten the location of the file were you tell it to do that though... Could someone tell me?
Tea, Earl Grey, hot
Offline
#16 2011-10-22 19:29:56
- wonder
- Developer
- From: Bucharest, Romania
- Registered: 2006-07-05
- Posts: 5,941
- Website
Re: [SOLVED] Arch Linux GNOME3 stuck in fallback, nvidia drivers wont work
ls /etc/X11/xorg.conf.d
Give what you have. To someone, it may be better than you dare to think.
Offline
#17 2011-10-22 19:40:46
- JazzPotato
- Member
- Registered: 2011-10-22
- Posts: 39
Re: [SOLVED] Arch Linux GNOME3 stuck in fallback, nvidia drivers wont work
Ok, i managed to get GNOME3 to work! yey!
I installed pretty much everything here:
http://www.archlinux.org/packages/?sort … =&limit=50
and ran:
nvidia-xconfig
And it worked!!!
Thank you all for all you help, it is greatly appreciated. May your life be lit by rays of beaming happiness and you body embalmed in pure creamy bliss.
Live long, and prosper.
Tea, Earl Grey, hot
Offline
#18 2011-10-22 20:11:09
- bernarcher
- Forum Fellow
- From: Germany
- Registered: 2009-02-17
- Posts: 2,281
Re: [SOLVED] Arch Linux GNOME3 stuck in fallback, nvidia drivers wont work
JazzPotato,
glad it works. Now please mark this thread as [SOLVED] by editing the title of your first post.
To know or not to know ...
... the questions remain forever.
Offline