You are not logged in.

#1 2011-11-17 20:16:25

tasty_minerals
Member
Registered: 2011-03-30
Posts: 191

[SOLVED] HP laserjet pro p1102 Users help me with CUPS!

So, I've installed every possible thing for printer, started cups in browser, added my printer etc.
But under administration tab, where I need to enter a connection with provided examples, I get lost completely:

Examples:
    http://hostname:631/ipp/
    http://hostname:631/ipp/port1

    ipp://hostname/ipp/
    ipp://hostname/ipp/port1

    lpd://hostname/queue

    socket://hostname
    socket://hostname:9100

I have no idea what do I set the connection to.
I've tried http://127.0.0.1:631/ipp/ http://myhostname:631/ipp/   ipp://127.0.0.1/ipp/   ipp://myhostname/ipp/
all variants give me "The printer URI is incorrect or no longer exists" or "unable to blablabla"
How do I make this thing work?

Last edited by tasty_minerals (2011-11-18 08:50:02)


lenovo thinkpad EDGE 13'

Offline

#2 2011-11-17 21:31:35

tasty_minerals
Member
Registered: 2011-03-30
Posts: 191

Re: [SOLVED] HP laserjet pro p1102 Users help me with CUPS!

OK, I got it running by providing socket://myhostname in connection field.
But now when I try to print a page it simply says "printer is busy" and that's it, nothing more.
(I connect my laserjet via usb cable by the way)


lenovo thinkpad EDGE 13'

Offline

#3 2011-11-18 08:49:52

tasty_minerals
Member
Registered: 2011-03-30
Posts: 191

Re: [SOLVED] HP laserjet pro p1102 Users help me with CUPS!

Finally got it working.
First you need to run "hp-setup" or "hp-plugin" utility from hplip package. This utility ("hp-setup") downloads the needed proprietary driver for Laserjet Pro p1102, extracts it and installs, then it installs printer and does all the other necessary stuff ("hp-plugin" just downloads, extracts and installs the driver). Then you can finally add a printer via CUPS.
That is it. Now you're ready to print.

The common error that may occur while downloading the proprietary driver with "hp-setup" or "hp-plugin" is extraction stage. It is all due to python3, python 2.7 bindings in the system. "hp-setup"|"hp-plugin" use python 2.7 while all modern arch systems are binded to use python3. To fix this simply "ln -s /usr/bin/python2.7 /usr/bin/python".

Don't forget to put "cupsd" into your daemons array and "lp" to your modules in rc.conf.
I also didn't blacklist "usblp", just in case.
And final note, don't forget to add "yourself" to sys group with:

# usermod -g sys yourusername

Last edited by tasty_minerals (2011-11-21 19:54:09)


lenovo thinkpad EDGE 13'

Offline

#4 2012-04-09 13:36:45

pfrenssen
Member
Registered: 2012-04-09
Posts: 14

Re: [SOLVED] HP laserjet pro p1102 Users help me with CUPS!

Thanks a lot!! This helped me get my HP CP1215 working. CUPS told me "requires proprietary plugin".

This is what got it running in my case:

$ sudo usermod -g sys USERNAME
$ sudo rm /usr/bin/python
$ sudo ln -s /usr/bin/python2.7 /usr/bin/python
$ hp-setup

Now follow the GUI's instructions to download the proprietary plugin from HP's website. When this is done you can assign the default version of Python back to version 3.

$ sudo rm /usr/bin/python
$ sudo ln -s /usr/bin/python3 /usr/bin/python

Offline

Board footer

Powered by FluxBB