Arch Linux

phunni

Member

From: Bristol, UK

Registered: 2003-08-13

Posts: 770

kernel USB error

Every time I boot my computer I get the following error message:

kernel: [   18.334100] generic-usb 0003:1C4F:000E.0002: usb_submit_urb(ctrl) failed

It doesn't happen at the same time during the boot process every time.

Does anyone have any idea what kind of problem it may indicate and if it can be fixed?  Am slightly concerned it may indicate some sort of motherboard problem...

sealemar

Member

Registered: 2011-10-30

Posts: 32

Re: kernel USB error

Do you possess a custom configured kernel or maybe some sort of non-arch kernel (-ck, -pf, etc.)?

phunni

Member

From: Bristol, UK

Registered: 2003-08-13

Posts: 770

Re: kernel USB error

Good old stock kernel.

sealemar

Member

Registered: 2011-10-30

Posts: 32

Re: kernel USB error

How long does it take for your kernel to start? That log string is dated 18 seconds after start. Does that mean you can't see even tty for at least 18 seconds from booting the OS? Or that error comes after start or even after you log in?

phunni

Member

From: Bristol, UK

Registered: 2003-08-13

Posts: 770

Re: kernel USB error

I can't give any input until the message has appeared.  Annoyingly, it often appears after the log in prompt - meaning I can't try and log in until after the error appears.

Everything else seems to be starting happily in the meantime, however.

sealemar

Member

Registered: 2011-10-30

Posts: 32

Re: kernel USB error

That's too long to boot up.
Have you had the same problem before or that appeared after some particular action?
Is your keyboard a USB one?

phunni

Member

From: Bristol, UK

Registered: 2003-08-13

Posts: 770

Re: kernel USB error

It is a USB keyboard - and has been since before the problem started. I'm not aware of any particular action that caused it to happen.  It's been happening for a month or so, but not before that.

sealemar

Member

Registered: 2011-10-30

Posts: 32

Re: kernel USB error

# lspci
# lsusb
# lsmod
# dmesg # immediately after log in (after the error string appears)

Please

phunni

Member

From: Bristol, UK

Registered: 2003-08-13

Posts: 770

Re: kernel USB error

#dmesg

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.1.1-1-ARCH (tobias@T-POWA-LX) (gcc version 4.6.2 (GCC) ) #1 SMP PREEMPT Fri Nov 11 22:28:29 CET 2011
[    0.000000] Command line: root=/dev/mapper/vg-sysroot ro vga=773 quiet
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009b400 (usable)
[    0.000000]  BIOS-e820: 000000000009b400 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e2000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 00000000b7fb0000 (usable)
[    0.000000]  BIOS-e820: 00000000b7fb0000 - 00000000b7fbe000 (ACPI data)
[    0.000000]  BIOS-e820: 00000000b7fbe000 - 00000000b7fe0000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000b7fe0000 - 00000000b7fee000 (reserved)
[    0.000000]  BIOS-e820: 00000000b7ff0000 - 00000000b8000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
[    0.000000]  BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[    0.000000]  BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] DMI present.
[    0.000000] DMI: System manufacturer System Product Name/M2N68-AM SE2, BIOS 0706    06/29/2009
[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[    0.000000] No AGP bridge found
[    0.000000] last_pfn = 0x140000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-EFFFF uncachable
[    0.000000]   F0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000000 mask FFFF80000000 write-back
[    0.000000]   1 base 000080000000 mask FFFFE0000000 write-back
[    0.000000]   2 base 0000A0000000 mask FFFFF0000000 write-back
[    0.000000]   3 base 0000B0000000 mask FFFFF8000000 write-back
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] TOM2: 0000000140000000 aka 5120M
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] e820 update range: 00000000b8000000 - 0000000100000000 (usable) ==> (reserved)
[    0.000000] last_pfn = 0xb7fb0 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [ffff8800000ff780] ff780
[    0.000000] initial memory mapped : 0 - 20000000
[    0.000000] Base memory trampoline at [ffff880000096000] 96000 size 20480
[    0.000000] Using GB pages for direct mapping
[    0.000000] init_memory_mapping: 0000000000000000-00000000b7fb0000
[    0.000000]  0000000000 - 0080000000 page 1G
[    0.000000]  0080000000 - 00b7e00000 page 2M
[    0.000000]  00b7e00000 - 00b7fb0000 page 4k
[    0.000000] kernel direct mapping tables up to b7fb0000 @ 1fffd000-20000000
[    0.000000] init_memory_mapping: 0000000100000000-0000000140000000
[    0.000000]  0100000000 - 0140000000 page 1G
[    0.000000] kernel direct mapping tables up to 140000000 @ b7faf000-b7fb0000
[    0.000000] RAMDISK: 37d46000 - 37ff0000
[    0.000000] ACPI: RSDP 00000000000fbcd0 00024 (v02 ACPIAM)
[    0.000000] ACPI: XSDT 00000000b7fb0100 00054 (v01 062909 XSDT1419 20090629 MSFT 00000097)
[    0.000000] ACPI: FACP 00000000b7fb0290 000F4 (v03 062909 FACP1419 20090629 MSFT 00000097)
[    0.000000] ACPI: DSDT 00000000b7fb0450 066FA (v01  A1269 A1269000 00000000 INTL 20060113)
[    0.000000] ACPI: FACS 00000000b7fbe000 00040
[    0.000000] ACPI: APIC 00000000b7fb0390 00080 (v01 062909 APIC1419 20090629 MSFT 00000097)
[    0.000000] ACPI: MCFG 00000000b7fb0410 0003C (v01 062909 OEMMCFG  20090629 MSFT 00000097)
[    0.000000] ACPI: OEMB 00000000b7fbe040 00071 (v01 062909 OEMB1419 20090629 MSFT 00000097)
[    0.000000] ACPI: HPET 00000000b7fb6b50 00038 (v01 062909 OEMHPET0 20090629 MSFT 00000097)
[    0.000000] ACPI: SSDT 00000000b7fb6b90 00458 (v01 A M I  POWERNOW 00000001 AMD  00000001)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] Scanning NUMA topology in Northbridge 24
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at 0000000000000000-0000000140000000
[    0.000000] Initmem setup node 0 0000000000000000-0000000140000000
[    0.000000]   NODE_DATA [000000013fffb000 - 000000013fffffff]
[    0.000000]  [ffffea0000000000-ffffea0004ffffff] PMD -> [ffff88013b800000-ffff88013f5fffff] on node 0
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   DMA32    0x00001000 -> 0x00100000
[    0.000000]   Normal   0x00100000 -> 0x00140000
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[3] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009b
[    0.000000]     0: 0x00000100 -> 0x000b7fb0
[    0.000000]     0: 0x00100000 -> 0x00140000
[    0.000000] On node 0 totalpages: 1015611
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 5 pages reserved
[    0.000000]   DMA zone: 3910 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 16320 pages used for memmap
[    0.000000]   DMA32 zone: 733168 pages, LIFO batch:31
[    0.000000]   Normal zone: 4096 pages used for memmap
[    0.000000]   Normal zone: 258048 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x508
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] ACPI: IRQ14 used by override.
[    0.000000] ACPI: IRQ15 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
[    0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: 000000000009b000 - 000000000009c000
[    0.000000] PM: Registered nosave memory: 000000000009c000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e2000
[    0.000000] PM: Registered nosave memory: 00000000000e2000 - 0000000000100000
[    0.000000] PM: Registered nosave memory: 00000000b7fb0000 - 00000000b7fbe000
[    0.000000] PM: Registered nosave memory: 00000000b7fbe000 - 00000000b7fe0000
[    0.000000] PM: Registered nosave memory: 00000000b7fe0000 - 00000000b7fee000
[    0.000000] PM: Registered nosave memory: 00000000b7fee000 - 00000000b7ff0000
[    0.000000] PM: Registered nosave memory: 00000000b7ff0000 - 00000000b8000000
[    0.000000] PM: Registered nosave memory: 00000000b8000000 - 00000000fec00000
[    0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
[    0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fee00000
[    0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fef00000
[    0.000000] PM: Registered nosave memory: 00000000fef00000 - 00000000fff00000
[    0.000000] PM: Registered nosave memory: 00000000fff00000 - 0000000100000000
[    0.000000] Allocating PCI resources starting at b8000000 (gap: b8000000:46c00000)
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] PERCPU: Embedded 27 pages/cpu @ffff88013fc00000 s80448 r8192 d21952 u524288
[    0.000000] pcpu-alloc: s80448 r8192 d21952 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 995126
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: root=/dev/mapper/vg-sysroot ro vga=773 quiet
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Node 0: aperture @ ac000000 size 32 MB
[    0.000000] Aperture pointing to e820 RAM. Ignoring.
[    0.000000] Your BIOS doesn't leave a aperture memory hole
[    0.000000] Please enable the IOMMU option in the BIOS setup
[    0.000000] This costs you 64 MB of RAM
[    0.000000] Mapping aperture over 65536 KB of RAM @ ac000000
[    0.000000] PM: Registered nosave memory: 00000000ac000000 - 00000000b0000000
[    0.000000] Memory: 3852428k/5242880k available (4156k kernel code, 1180436k absent, 210016k reserved, 5288k data, 712k init)
[    0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] 	Verbose stalled-CPUs detection is disabled.
[    0.000000] NR_IRQS:2304
[    0.000000] Extended CMOS year: 2000
[    0.000000] spurious 8259A interrupt: IRQ7.
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] allocated 32505856 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] hpet clockevent registered
[    0.000000] Fast TSC calibration failed
[    0.000000] TSC: Unable to calibrate against PIT
[    0.000000] TSC: using HPET reference calibration
[    0.000000] Detected 2712.327 MHz processor.
[    0.013336] Calibrating delay loop (skipped), value calculated using timer frequency.. 5426.68 BogoMIPS (lpj=9041090)
[    0.013340] pid_max: default: 32768 minimum: 301
[    0.013466] Security Framework initialized
[    0.013471] AppArmor: AppArmor disabled by boot time parameter
[    0.013807] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.017771] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.018430] Mount-cache hash table entries: 256
[    0.018836] Initializing cgroup subsys cpuacct
[    0.018867] Initializing cgroup subsys memory
[    0.018884] Initializing cgroup subsys devices
[    0.018886] Initializing cgroup subsys freezer
[    0.018888] Initializing cgroup subsys net_cls
[    0.018890] Initializing cgroup subsys blkio
[    0.018936] tseg: 0000000000
[    0.018950] CPU: Physical Processor ID: 0
[    0.018951] CPU: Processor Core ID: 0
[    0.018953] mce: CPU supports 6 MCE banks
[    0.018962] using AMD E400 aware idle routine
[    0.019591] ACPI: Core revision 20110623
[    0.022177] ftrace: allocating 16313 entries in 64 pages
[    0.023852] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.059673] CPU0: AMD Athlon(tm) II X2 215 Processor stepping 02
[    0.059996] Performance Events: AMD PMU driver.
[    0.059996] ... version:                0
[    0.059996] ... bit width:              48
[    0.059996] ... generic registers:      4
[    0.059996] ... value mask:             0000ffffffffffff
[    0.059996] ... max period:             00007fffffffffff
[    0.059996] ... fixed-purpose events:   0
[    0.059996] ... event mask:             000000000000000f
[    0.076973] NMI watchdog enabled, takes one hw-pmu counter.
[    0.103372] Booting Node   0, Processors  #1
[    0.103376] smpboot cpu 1: start_ip = 96000
[    0.200016] NMI watchdog enabled, takes one hw-pmu counter.
[    0.206679] Brought up 2 CPUs
[    0.206683] Total of 2 processors activated (10853.38 BogoMIPS).
[    0.207209] devtmpfs: initialized
[    0.208107] PM: Registering ACPI NVS region at b7fbe000 (139264 bytes)
[    0.208107] print_constraints: dummy: 
[    0.208107] NET: Registered protocol family 16
[    0.208107] node 0 link 0: io port [1000, ffffff]
[    0.208107] TOM: 00000000c0000000 aka 3072M
[    0.208107] Fam 10h mmconf [e0000000, efffffff]
[    0.208107] node 0 link 0: mmio [e0000000, efffffff] ==> none
[    0.208107] node 0 link 0: mmio [a0000, bffff]
[    0.208107] node 0 link 0: mmio [c0000000, fe0bffff] ==> [c0000000, dfffffff] and [f0000000, fe0bffff]
[    0.208107] TOM2: 0000000140000000 aka 5120M
[    0.208107] bus: [00, 07] on node 0 link 0
[    0.208107] bus: 00 index 0 [io  0x0000-0xffff]
[    0.208107] bus: 00 index 1 [mem 0x000a0000-0x000bffff]
[    0.208107] bus: 00 index 2 [mem 0xc0000000-0xdfffffff]
[    0.208107] bus: 00 index 3 [mem 0xf0000000-0xffffffff]
[    0.208107] bus: 00 index 4 [mem 0x140000000-0xfcffffffff]
[    0.208107] Extended Config Space enabled on 1 nodes
[    0.208107] ACPI: bus type pci registered
[    0.210079] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.210082] PCI: not using MMCONFIG
[    0.210084] PCI: Using configuration type 1 for base access
[    0.210085] PCI: Using configuration type 1 for extended access
[    0.210392] bio: create slab <bio-0> at 0
[    0.210392] ACPI: Added _OSI(Module Device)
[    0.210392] ACPI: Added _OSI(Processor Device)
[    0.210392] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.210392] ACPI: Added _OSI(Processor Aggregator Device)
[    0.210821] ACPI: EC: Look up EC in DSDT
[    0.211509] ACPI: Executed 1 blocks of module-level executable AML code
[    0.213960] ACPI: Interpreter enabled
[    0.213964] ACPI: (supports S0 S3 S4 S5)
[    0.213978] ACPI: Using IOAPIC for interrupt routing
[    0.213996] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.214614] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[    0.237978] ACPI: No dock devices found.
[    0.237981] HEST: Table not found.
[    0.237984] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.238116] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.238241] pci_root PNP0A03:00: host bridge window [io  0x0000-0x0cf7]
[    0.238243] pci_root PNP0A03:00: host bridge window [io  0x0d00-0xffff]
[    0.238245] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
[    0.238247] pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff]
[    0.238249] pci_root PNP0A03:00: host bridge window [mem 0xb8000000-0xdfffffff]
[    0.238251] pci_root PNP0A03:00: host bridge window [mem 0xf0000000-0xfebfffff]
[    0.238275] pci 0000:00:00.0: [10de:03e2] type 0 class 0x000500
[    0.238427] pci 0000:00:01.0: [10de:03e1] type 0 class 0x000601
[    0.238433] pci 0000:00:01.0: reg 10: [io  0x0900-0x09ff]
[    0.238465] pci 0000:00:01.1: [10de:03eb] type 0 class 0x000c05
[    0.238475] pci 0000:00:01.1: reg 10: [io  0x0e00-0x0e3f]
[    0.238489] pci 0000:00:01.1: reg 20: [io  0x0600-0x063f]
[    0.238494] pci 0000:00:01.1: reg 24: [io  0x0700-0x073f]
[    0.238513] pci 0000:00:01.1: PME# supported from D3hot D3cold
[    0.238518] pci 0000:00:01.1: PME# disabled
[    0.238528] pci 0000:00:01.2: [10de:03f5] type 0 class 0x000500
[    0.238566] pci 0000:00:02.0: [10de:03f1] type 0 class 0x000c03
[    0.238574] pci 0000:00:02.0: reg 10: [mem 0xdffff000-0xdfffffff]
[    0.238601] pci 0000:00:02.0: supports D1 D2
[    0.238603] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.238606] pci 0000:00:02.0: PME# disabled
[    0.238617] pci 0000:00:02.1: [10de:03f2] type 0 class 0x000c03
[    0.238626] pci 0000:00:02.1: reg 10: [mem 0xdfffec00-0xdfffecff]
[    0.238658] pci 0000:00:02.1: supports D1 D2
[    0.238659] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.238662] pci 0000:00:02.1: PME# disabled
[    0.238679] pci 0000:00:04.0: [10de:03f3] type 1 class 0x000604
[    0.238711] pci 0000:00:05.0: [10de:03f0] type 0 class 0x000403
[    0.238721] pci 0000:00:05.0: reg 10: [mem 0xdfff8000-0xdfffbfff]
[    0.238752] pci 0000:00:05.0: PME# supported from D3hot D3cold
[    0.238755] pci 0000:00:05.0: PME# disabled
[    0.238771] pci 0000:00:06.0: [10de:03ec] type 0 class 0x000101
[    0.238791] pci 0000:00:06.0: reg 20: [io  0xffa0-0xffaf]
[    0.238817] pci 0000:00:07.0: [10de:03ef] type 0 class 0x000680
[    0.238826] pci 0000:00:07.0: reg 10: [mem 0xdfffd000-0xdfffdfff]
[    0.238830] pci 0000:00:07.0: reg 14: [io  0xd480-0xd487]
[    0.238854] pci 0000:00:07.0: supports D1 D2
[    0.238856] pci 0000:00:07.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.238859] pci 0000:00:07.0: PME# disabled
[    0.238871] pci 0000:00:08.0: [10de:03f6] type 0 class 0x000101
[    0.238878] pci 0000:00:08.0: reg 10: [io  0xd400-0xd407]
[    0.238882] pci 0000:00:08.0: reg 14: [io  0xd080-0xd083]
[    0.238886] pci 0000:00:08.0: reg 18: [io  0xd000-0xd007]
[    0.238890] pci 0000:00:08.0: reg 1c: [io  0xcc00-0xcc03]
[    0.238894] pci 0000:00:08.0: reg 20: [io  0xc880-0xc88f]
[    0.238898] pci 0000:00:08.0: reg 24: [mem 0xdfffc000-0xdfffcfff]
[    0.238924] pci 0000:00:09.0: [10de:03e8] type 1 class 0x000604
[    0.238943] pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.238945] pci 0000:00:09.0: PME# disabled
[    0.238961] pci 0000:00:0b.0: [10de:03e9] type 1 class 0x000604
[    0.238980] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.238982] pci 0000:00:0b.0: PME# disabled
[    0.238994] pci 0000:00:0c.0: [10de:03e9] type 1 class 0x000604
[    0.239012] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.239014] pci 0000:00:0c.0: PME# disabled
[    0.239024] pci 0000:00:0d.0: [10de:03d6] type 0 class 0x000300
[    0.239030] pci 0000:00:0d.0: reg 10: [mem 0xde000000-0xdeffffff]
[    0.239035] pci 0000:00:0d.0: reg 14: [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.239040] pci 0000:00:0d.0: reg 1c: [mem 0xdd000000-0xddffffff 64bit]
[    0.239046] pci 0000:00:0d.0: reg 30: [mem 0xdffc0000-0xdffdffff pref]
[    0.239067] pci 0000:00:18.0: [1022:1200] type 0 class 0x000600
[    0.239081] pci 0000:00:18.1: [1022:1201] type 0 class 0x000600
[    0.239094] pci 0000:00:18.2: [1022:1202] type 0 class 0x000600
[    0.239106] pci 0000:00:18.3: [1022:1203] type 0 class 0x000600
[    0.239120] pci 0000:00:18.4: [1022:1204] type 0 class 0x000600
[    0.239161] pci 0000:01:06.0: [134d:7892] type 0 class 0x000703
[    0.239174] pci 0000:01:06.0: reg 10: [io  0xec00-0xec3f]
[    0.239220] pci 0000:01:06.0: supports D2
[    0.239221] pci 0000:01:06.0: PME# supported from D0 D2 D3hot D3cold
[    0.239225] pci 0000:01:06.0: PME# disabled
[    0.239250] pci 0000:00:04.0: PCI bridge to [bus 01-01] (subtractive decode)
[    0.239253] pci 0000:00:04.0:   bridge window [io  0xe000-0xefff]
[    0.239257] pci 0000:00:04.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
[    0.239259] pci 0000:00:04.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
[    0.239261] pci 0000:00:04.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    0.239264] pci 0000:00:04.0:   bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
[    0.239266] pci 0000:00:04.0:   bridge window [mem 0xb8000000-0xdfffffff] (subtractive decode)
[    0.239268] pci 0000:00:04.0:   bridge window [mem 0xf0000000-0xfebfffff] (subtractive decode)
[    0.239287] pci 0000:00:09.0: PCI bridge to [bus 02-02]
[    0.239308] pci 0000:00:0b.0: PCI bridge to [bus 03-03]
[    0.239328] pci 0000:00:0c.0: PCI bridge to [bus 04-04]
[    0.239339] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.239422] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[    0.239446] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR10._PRT]
[    0.239467] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR11._PRT]
[    0.239489] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR12._PRT]
[    0.239579]  pci0000:00: Requesting ACPI _OSC control (0x1d)
[    0.239683]  pci0000:00: ACPI _OSC request failed (AE_SUPPORT), returned control mask: 0x0c
[    0.239685] ACPI _OSC control for PCIe not granted, disabling ASPM
[    0.242604] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *7
[    0.242669] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *0, disabled.
[    0.242732] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
[    0.242794] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
[    0.242857] ACPI: PCI Interrupt Link [LNEA] (IRQs 16 17 18 19) *0, disabled.
[    0.242919] ACPI: PCI Interrupt Link [LNEB] (IRQs 16 17 18 19) *0, disabled.
[    0.242982] ACPI: PCI Interrupt Link [LNEC] (IRQs 16 17 18 19) *0, disabled.
[    0.243044] ACPI: PCI Interrupt Link [LNED] (IRQs 16 17 18 19) *0, disabled.
[    0.243109] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *5
[    0.243173] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *7
[    0.243241] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *10
[    0.243305] ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *11
[    0.243380] ACPI: PCI Interrupt Link [LMC9] (IRQs 20 21 22 23) *11
[    0.243444] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *10
[    0.243506] ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *0, disabled.
[    0.243571] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *5
[    0.243633] ACPI: PCI Interrupt Link [LSA1] (IRQs 20 21 22 23) *0, disabled.
[    0.243703] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled.
[    0.243766] vgaarb: device added: PCI:0000:00:0d.0,decodes=io+mem,owns=io+mem,locks=none
[    0.243766] vgaarb: loaded
[    0.243766] vgaarb: bridge control possible 0000:00:0d.0
[    0.243766] PCI: Using ACPI for IRQ routing
[    0.249922] PCI: pci_cache_line_size set to 64 bytes
[    0.249966] reserve RAM buffer: 000000000009b400 - 000000000009ffff 
[    0.249968] reserve RAM buffer: 00000000b7fb0000 - 00000000b7ffffff 
[    0.250085] NetLabel: Initializing
[    0.250086] NetLabel:  domain hash size = 128
[    0.250088] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.250098] NetLabel:  unlabeled traffic allowed by default
[    0.250109] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.250115] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
[    0.250118] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
[    0.260026] Switching to clocksource hpet
[    0.263174] Switched to NOHz mode on CPU #0
[    0.263254] Switched to NOHz mode on CPU #1
[    0.264912] pnp: PnP ACPI init
[    0.264928] ACPI: bus type pnp registered
[    0.265028] pnp 00:00: [bus 00-ff]
[    0.265030] pnp 00:00: [io  0x0cf8-0x0cff]
[    0.265032] pnp 00:00: [io  0x0000-0x0cf7 window]
[    0.265034] pnp 00:00: [io  0x0d00-0xffff window]
[    0.265036] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[    0.265038] pnp 00:00: [mem 0x000d0000-0x000dffff window]
[    0.265040] pnp 00:00: [mem 0xb8000000-0xdfffffff window]
[    0.265041] pnp 00:00: [mem 0xf0000000-0xfebfffff window]
[    0.265090] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[    0.265111] pnp 00:01: [dma 4]
[    0.265113] pnp 00:01: [io  0x0000-0x000f]
[    0.265114] pnp 00:01: [io  0x0081-0x0083]
[    0.265116] pnp 00:01: [io  0x0087]
[    0.265117] pnp 00:01: [io  0x0089-0x008b]
[    0.265118] pnp 00:01: [io  0x008f]
[    0.265120] pnp 00:01: [io  0x00c0-0x00df]
[    0.265142] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.265150] pnp 00:02: [io  0x0070-0x0071]
[    0.265163] pnp 00:02: [irq 8]
[    0.265180] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.265186] pnp 00:03: [io  0x0061]
[    0.265200] pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active)
[    0.265207] pnp 00:04: [io  0x00f0-0x00ff]
[    0.265214] pnp 00:04: [irq 13]
[    0.265229] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.265672] pnp 00:05: [mem 0x000d0000-0x000d3fff window]
[    0.265674] pnp 00:05: [mem 0x000d4000-0x000d7fff window]
[    0.265676] pnp 00:05: [mem 0x000de000-0x000dffff window]
[    0.265677] pnp 00:05: [io  0x0010-0x001f]
[    0.265679] pnp 00:05: [io  0x0022-0x003f]
[    0.265680] pnp 00:05: [io  0x0044-0x004d]
[    0.265682] pnp 00:05: [io  0x0050-0x005f]
[    0.265683] pnp 00:05: [io  0x0062-0x0063]
[    0.265685] pnp 00:05: [io  0x0065-0x006f]
[    0.265686] pnp 00:05: [io  0x0072-0x007f]
[    0.265688] pnp 00:05: [io  0x0080]
[    0.265689] pnp 00:05: [io  0x0084-0x0086]
[    0.265691] pnp 00:05: [io  0x0088]
[    0.265692] pnp 00:05: [io  0x008c-0x008e]
[    0.265693] pnp 00:05: [io  0x0090-0x009f]
[    0.265695] pnp 00:05: [io  0x00a2-0x00bf]
[    0.265696] pnp 00:05: [io  0x00e0-0x00ef]
[    0.265698] pnp 00:05: [io  0x04d0-0x04d1]
[    0.265699] pnp 00:05: [io  0x0800-0x080f]
[    0.265701] pnp 00:05: [io  0x0500-0x057f]
[    0.265702] pnp 00:05: [io  0x0580-0x05ff]
[    0.265704] pnp 00:05: [io  0x0800-0x087f]
[    0.265705] pnp 00:05: [io  0x0880-0x08ff]
[    0.265706] pnp 00:05: [io  0x0d00-0x0d7f]
[    0.265708] pnp 00:05: [io  0x0d80-0x0dff]
[    0.265709] pnp 00:05: [io  0x0900-0x097f]
[    0.265711] pnp 00:05: [io  0x0980-0x09ff]
[    0.265712] pnp 00:05: [io  0x1100-0x117f]
[    0.265714] pnp 00:05: [io  0x1180-0x11ff]
[    0.265716] pnp 00:05: [mem 0xfec80000-0x1fd93ffff]
[    0.265717] pnp 00:05: [mem 0xfefe0000-0xfefe01ff]
[    0.265719] pnp 00:05: [mem 0xfefe1000-0xfefe1fff]
[    0.265720] pnp 00:05: [mem 0xfee01000-0xfeefffff]
[    0.265728] pnp 00:05: disabling [io  0x0900-0x097f] because it overlaps 0000:00:01.0 BAR 0 [io  0x0900-0x09ff]
[    0.265731] pnp 00:05: disabling [io  0x0980-0x09ff] because it overlaps 0000:00:01.0 BAR 0 [io  0x0900-0x09ff]
[    0.265790] system 00:05: [io  0x04d0-0x04d1] has been reserved
[    0.265792] system 00:05: [io  0x0800-0x080f] has been reserved
[    0.265794] system 00:05: [io  0x0500-0x057f] has been reserved
[    0.265796] system 00:05: [io  0x0580-0x05ff] has been reserved
[    0.265801] system 00:05: [io  0x0800-0x087f] could not be reserved
[    0.265803] system 00:05: [io  0x0880-0x08ff] has been reserved
[    0.265805] system 00:05: [io  0x0d00-0x0d7f] has been reserved
[    0.265807] system 00:05: [io  0x0d80-0x0dff] has been reserved
[    0.265809] system 00:05: [io  0x1100-0x117f] has been reserved
[    0.265811] system 00:05: [io  0x1180-0x11ff] has been reserved
[    0.265814] system 00:05: [mem 0x000d0000-0x000d3fff window] has been reserved
[    0.265816] system 00:05: [mem 0x000d4000-0x000d7fff window] has been reserved
[    0.265819] system 00:05: [mem 0x000de000-0x000dffff window] has been reserved
[    0.265821] system 00:05: [mem 0xfec80000-0x1fd93ffff] could not be reserved
[    0.265824] system 00:05: [mem 0xfefe0000-0xfefe01ff] has been reserved
[    0.265826] system 00:05: [mem 0xfefe1000-0xfefe1fff] has been reserved
[    0.265828] system 00:05: [mem 0xfee01000-0xfeefffff] has been reserved
[    0.265831] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.265878] pnp 00:06: [mem 0xfed00000-0xfed00fff]
[    0.265895] pnp 00:06: Plug and Play ACPI device, IDs PNP0103 (active)
[    0.265935] pnp 00:07: [mem 0xfec00000-0xfec00fff]
[    0.265937] pnp 00:07: [mem 0xfee00000-0xfee00fff]
[    0.265939] pnp 00:07: [mem 0xb8000000-0xbfffffff]
[    0.265968] system 00:07: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.265970] system 00:07: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.265972] system 00:07: [mem 0xb8000000-0xbfffffff] has been reserved
[    0.265975] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.266089] pnp 00:08: [io  0x0000-0xffffffffffffffff disabled]
[    0.266091] pnp 00:08: [io  0x0230-0x023f]
[    0.266093] pnp 00:08: [io  0x0290-0x029f]
[    0.266094] pnp 00:08: [io  0x0a00-0x0a0f]
[    0.266098] pnp 00:08: [io  0x0a10-0x0a1f]
[    0.266126] system 00:08: [io  0x0230-0x023f] has been reserved
[    0.266128] system 00:08: [io  0x0290-0x029f] has been reserved
[    0.266130] system 00:08: [io  0x0a00-0x0a0f] has been reserved
[    0.266132] system 00:08: [io  0x0a10-0x0a1f] has been reserved
[    0.266135] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.266497] pnp 00:09: [io  0x03f8-0x03ff]
[    0.266505] pnp 00:09: [irq 4]
[    0.266507] pnp 00:09: [dma 0 disabled]
[    0.266555] pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.266585] pnp 00:0a: [mem 0xe0000000-0xefffffff]
[    0.266612] system 00:0a: [mem 0xe0000000-0xefffffff] has been reserved
[    0.266615] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.266725] pnp 00:0b: [mem 0x00000000-0x0009ffff]
[    0.266726] pnp 00:0b: [mem 0x000c0000-0x000cffff]
[    0.266728] pnp 00:0b: [mem 0x000e0000-0x000fffff]
[    0.266730] pnp 00:0b: [mem 0x00100000-0xb7ffffff]
[    0.266731] pnp 00:0b: [mem 0xfec00000-0xffffffff]
[    0.266763] system 00:0b: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.266766] system 00:0b: [mem 0x000c0000-0x000cffff] could not be reserved
[    0.266768] system 00:0b: [mem 0x000e0000-0x000fffff] could not be reserved
[    0.266770] system 00:0b: [mem 0x00100000-0xb7ffffff] could not be reserved
[    0.266773] system 00:0b: [mem 0xfec00000-0xffffffff] could not be reserved
[    0.266775] system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.266947] pnp: PnP ACPI: found 12 devices
[    0.266949] ACPI: ACPI bus type pnp unregistered
[    0.273661] PCI: max bus depth: 1 pci_try_num: 2
[    0.273679] pci 0000:00:04.0: PCI bridge to [bus 01-01]
[    0.273682] pci 0000:00:04.0:   bridge window [io  0xe000-0xefff]
[    0.273688] pci 0000:00:09.0: PCI bridge to [bus 02-02]
[    0.273692] pci 0000:00:0b.0: PCI bridge to [bus 03-03]
[    0.273696] pci 0000:00:0c.0: PCI bridge to [bus 04-04]
[    0.273705] pci 0000:00:04.0: setting latency timer to 64
[    0.273709] pci 0000:00:09.0: setting latency timer to 64
[    0.273713] pci 0000:00:0b.0: setting latency timer to 64
[    0.273716] pci 0000:00:0c.0: setting latency timer to 64
[    0.273719] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.273721] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.273723] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.273725] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[    0.273727] pci_bus 0000:00: resource 8 [mem 0xb8000000-0xdfffffff]
[    0.273729] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfebfffff]
[    0.273731] pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
[    0.273733] pci_bus 0000:01: resource 4 [io  0x0000-0x0cf7]
[    0.273735] pci_bus 0000:01: resource 5 [io  0x0d00-0xffff]
[    0.273736] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff]
[    0.273738] pci_bus 0000:01: resource 7 [mem 0x000d0000-0x000dffff]
[    0.273741] pci_bus 0000:01: resource 8 [mem 0xb8000000-0xdfffffff]
[    0.273743] pci_bus 0000:01: resource 9 [mem 0xf0000000-0xfebfffff]
[    0.273816] NET: Registered protocol family 2
[    0.273981] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.275043] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[    0.277828] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.278172] TCP: Hash tables configured (established 524288 bind 65536)
[    0.278175] TCP reno registered
[    0.278186] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.278220] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.278415] NET: Registered protocol family 1
[    0.853474] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.853522] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.853577] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.853629] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.853685] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.853745] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.853809] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.853814] pci 0000:00:0d.0: Boot video device
[    0.853825] PCI: CLS 64 bytes, default 64
[    0.853882] Unpacking initramfs...
[    0.891959] Freeing initrd memory: 2728k freed
[    0.893770] PCI-DMA: Disabling AGP.
[    0.896564] PCI-DMA: aperture base @ ac000000 size 65536 KB
[    0.896565] PCI-DMA: using GART IOMMU.
[    0.896568] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[    0.899566] audit: initializing netlink socket (disabled)
[    0.899586] type=2000 audit(1321893167.896:1): initialized
[    0.909986] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.931668] VFS: Disk quotas dquot_6.5.2
[    0.931801] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.931957] msgmni has been set to 7658
[    0.932209] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.932249] io scheduler noop registered
[    0.932252] io scheduler deadline registered
[    0.932320] io scheduler cfq registered (default)
[    0.932433] pcieport 0000:00:09.0: setting latency timer to 64
[    0.932453] pcieport 0000:00:09.0: irq 40 for MSI/MSI-X
[    0.935906] pcieport 0000:00:0b.0: setting latency timer to 64
[    0.935930] pcieport 0000:00:0b.0: irq 41 for MSI/MSI-X
[    0.936048] pcieport 0000:00:0c.0: setting latency timer to 64
[    0.936063] pcieport 0000:00:0c.0: irq 42 for MSI/MSI-X
[    0.936177] vesafb: mode is 1024x768x8, linelength=1024, pages=3
[    0.936179] vesafb: scrolling: redraw
[    0.936181] vesafb: Pseudocolor: size=8:8:8:8, shift=0:0:0:0
[    0.936326] vesafb: framebuffer at 0xc0000000, mapped to 0xffffc90011100000, using 1536k, total 131072k
[    0.940230] Console: switching to colour frame buffer device 128x48
[    0.944038] fb0: VESA VGA frame buffer device
[    0.944069] ERST: Table is not found!
[    0.944071] GHES: HEST is not enabled!
[    0.944163] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    0.964640] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    1.107333] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    1.113655] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 19
[    1.113669] serial 0000:01:06.0: PCI INT A -> Link[LNKA] -> GSI 19 (level, low) -> IRQ 19
[    1.213597] Linux agpgart interface v0.103
[    1.213644] i8042: PNP: No PS/2 controller found. Probing ports directly.
[    1.214041] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.214067] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.214183] mousedev: PS/2 mouse device common for all mice
[    1.214234] rtc_cmos 00:02: RTC can wake from S4
[    1.214361] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[    1.214397] rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
[    1.214405] cpuidle: using governor ladder
[    1.214406] cpuidle: using governor menu
[    1.214607] TCP cubic registered
[    1.214610] NET: Registered protocol family 17
[    1.214618] Registering the dns_resolver key type
[    1.214724] PM: Hibernation image not present or could not be loaded.
[    1.214730] registered taskstats version 1
[    1.225100] rtc_cmos 00:02: setting system clock to 2011-11-21 16:32:48 UTC (1321893168)
[    1.225131] Initializing network drop monitor service
[    1.226183] Freeing unused kernel memory: 712k freed
[    1.226368] Write protecting the kernel read-only data: 8192k
[    1.232011] Freeing unused kernel memory: 1968k freed
[    1.234738] Freeing unused kernel memory: 704k freed
[    1.242955] udevd[63]: starting version 175
[    1.306978] SCSI subsystem initialized
[    1.310819] libata version 3.00 loaded.
[    1.311478] pata_amd 0000:00:06.0: version 0.4.1
[    1.311512] pata_amd 0000:00:06.0: setting latency timer to 64
[    1.311764] scsi0 : pata_amd
[    1.311845] scsi1 : pata_amd
[    1.312326] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[    1.312329] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[    1.317529] sata_nv 0000:00:08.0: version 3.5
[    1.317690] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 23
[    1.317703] sata_nv 0000:00:08.0: PCI INT A -> Link[LSA0] -> GSI 23 (level, low) -> IRQ 23
[    1.317752] sata_nv 0000:00:08.0: setting latency timer to 64
[    1.317956] scsi2 : sata_nv
[    1.318010] scsi3 : sata_nv
[    1.318086] ata3: SATA max UDMA/133 cmd 0xd400 ctl 0xd080 bmdma 0xc880 irq 23
[    1.318088] ata4: SATA max UDMA/133 cmd 0xd000 ctl 0xcc00 bmdma 0xc888 irq 23
[    1.477228] ata1.00: ATA-7: Maxtor 4R160L0, RAMB1TU0, max UDMA/133
[    1.477232] ata1.00: 320173056 sectors, multi 16: LBA48 
[    1.477394] ata1.01: ATA-7: Maxtor 6E030L0, NAR61590, max UDMA/133
[    1.477396] ata1.01: 60058656 sectors, multi 16: LBA 
[    1.477402] ata1: nv_mode_filter: 0x7f39f&0x7f39f->0x7f39f, BIOS=0x7f000 (0xc7c70000) ACPI=0x7f01f (15:15:0x15)
[    1.477406] ata1: nv_mode_filter: 0x7f39f&0x7f39f->0x7f39f, BIOS=0x7f000 (0xc7c70000) ACPI=0x7f01f (15:15:0x15)
[    1.490478] ata1.00: configured for UDMA/133
[    1.503769] ata1.01: configured for UDMA/133
[    1.503980] scsi 0:0:0:0: Direct-Access     ATA      Maxtor 4R160L0   RAMB PQ: 0 ANSI: 5
[    1.504215] scsi 0:0:1:0: Direct-Access     ATA      Maxtor 6E030L0   NAR6 PQ: 0 ANSI: 5
[    1.504322] ata2: port disabled--ignoring
[    1.783413] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.790285] ata3.00: ATA-7: SAMSUNG HD322HJ, 1AG01118, max UDMA7
[    1.790289] ata3.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    1.796953] ata3.00: configured for UDMA/133
[    1.797146] scsi 2:0:0:0: Direct-Access     ATA      SAMSUNG HD322HJ  1AG0 PQ: 0 ANSI: 5
[    1.900060] Refined TSC clocksource calibration: 2712.335 MHz.
[    1.900073] Switching to clocksource tsc
[    2.263533] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.270175] ata4.00: ATAPI: TSSTcorp CDDVDW SH-S223B, SB01, max UDMA/100
[    2.283508] ata4.00: configured for UDMA/100
[    2.284383] scsi 3:0:0:0: CD-ROM            TSSTcorp CDDVDW SH-S223B  SB01 PQ: 0 ANSI: 5
[    2.288292] sd 0:0:0:0: [sda] 320173056 512-byte logical blocks: (163 GB/152 GiB)
[    2.288304] sd 0:0:1:0: [sdb] 60058656 512-byte logical blocks: (30.7 GB/28.6 GiB)
[    2.288357] sd 0:0:0:0: [sda] Write Protect is off
[    2.288360] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.288362] sd 0:0:1:0: [sdb] Write Protect is off
[    2.288365] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[    2.288379] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.288382] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.288565] sd 2:0:0:0: [sdc] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[    2.288596] sd 2:0:0:0: [sdc] Write Protect is off
[    2.288599] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[    2.288610] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.295986]  sdc: sdc1 sdc2
[    2.296305] sd 2:0:0:0: [sdc] Attached SCSI disk
[    2.298044]  sda: sda1
[    2.304371]  sdb: sdb1
[    2.304627] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.305417] sd 0:0:1:0: [sdb] Attached SCSI disk
[    2.307790] sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.307796] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.308195] sr 3:0:0:0: Attached scsi CD-ROM sr0
[    2.659809] device-mapper: uevent: version 1.0.3
[    2.660233] device-mapper: ioctl: 4.21.0-ioctl (2011-07-06) initialised: dm-devel@redhat.com
[    2.848677] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
[    4.018892] udevd[246]: starting version 175
[    4.441040] ACPI: acpi_idle registered with cpuidle
[    4.563799] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 22
[    4.563813] snd_hda_intel 0000:00:05.0: PCI INT B -> Link[LAZA] -> GSI 22 (level, low) -> IRQ 22
[    4.563816] hda_intel: Disabling MSI
[    4.563887] snd_hda_intel 0000:00:05.0: setting latency timer to 64
[    4.574106] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[    4.574112] ACPI: Power Button [PWRB]
[    4.574152] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    4.574155] ACPI: Power Button [PWRF]
[    4.629472] usbcore: registered new interface driver usbfs
[    4.629497] usbcore: registered new interface driver hub
[    4.629544] usbcore: registered new device driver usb
[    4.748003] input: PC Speaker as /devices/platform/pcspkr/input/input2
[    4.799080] MCE: In-kernel MCE decoding enabled.
[    4.802315] EDAC MC: Ver: 2.1.0
[    4.813086] AMD64 EDAC driver v3.4.0
[    4.852035] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    4.905501] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    5.245776] nvidia: module license 'NVIDIA' taints kernel.
[    5.245780] Disabling lock debugging due to kernel taint
[    5.256714] hda_codec: ALC662 rev1: BIOS auto-probing.
[    5.676988] input: HDA NVidia Headphone as /devices/pci0000:00/0000:00:05.0/sound/card0/input3
[    5.715350] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
[    5.715521] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 21
[    5.715536] forcedeth 0000:00:07.0: PCI INT A -> Link[LMAC] -> GSI 21 (level, low) -> IRQ 21
[    5.715540] forcedeth 0000:00:07.0: setting latency timer to 64
[    6.237354] forcedeth 0000:00:07.0: ifname eth0, PHY OUI 0x732 @ 1, addr 00:26:18:bb:2e:30
[    6.237358] forcedeth 0000:00:07.0: highdma pwrctl mgmt lnktim msi desc-v3
[    6.240788] EDAC amd64: DRAM ECC disabled.
[    6.240795] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
[    6.240796]  Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
[    6.240797]  (Note that use of the override may cause unknown side effects.)
[    6.244383] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 20
[    6.244399] ehci_hcd 0000:00:02.1: PCI INT B -> Link[LUB2] -> GSI 20 (level, low) -> IRQ 20
[    6.244442] ehci_hcd 0000:00:02.1: setting latency timer to 64
[    6.244445] ehci_hcd 0000:00:02.1: EHCI Host Controller
[    6.244478] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
[    6.244502] ehci_hcd 0000:00:02.1: debug port 1
[    6.244509] ehci_hcd 0000:00:02.1: cache line size of 64 is not supported
[    6.244528] ehci_hcd 0000:00:02.1: irq 20, io mem 0xdfffec00
[    6.253385] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00
[    6.253551] hub 1-0:1.0: USB hub found
[    6.253555] hub 1-0:1.0: 10 ports detected
[    6.257179] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23
[    6.257185] ohci_hcd 0000:00:02.0: PCI INT A -> Link[LUB0] -> GSI 23 (level, low) -> IRQ 23
[    6.257229] ohci_hcd 0000:00:02.0: setting latency timer to 64
[    6.257232] ohci_hcd 0000:00:02.0: OHCI Host Controller
[    6.257250] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
[    6.257270] ohci_hcd 0000:00:02.0: irq 23, io mem 0xdffff000
[    6.312245] hub 2-0:1.0: USB hub found
[    6.312251] hub 2-0:1.0: 10 ports detected
[    6.315793] i2c i2c-0: nForce2 SMBus adapter at 0x600
[    6.315817] i2c i2c-1: nForce2 SMBus adapter at 0x700
[    6.319636] ACPI: PCI Interrupt Link [LMC9] enabled at IRQ 22
[    6.319643] nvidia 0000:00:0d.0: PCI INT A -> Link[LMC9] -> GSI 22 (level, low) -> IRQ 22
[    6.319650] nvidia 0000:00:0d.0: setting latency timer to 64
[    6.319653] vgaarb: device changed decodes: PCI:0000:00:0d.0,olddecodes=io+mem,decodes=none:owns=io+mem
[    6.319817] NVRM: loading NVIDIA UNIX x86_64 Kernel Module  285.05.09  Fri Sep 23 17:31:57 PDT 2011
[    6.666722] usb 1-10: new high speed USB device number 4 using ehci_hcd
[    6.940993] EXT4-fs (dm-1): re-mounted. Opts: (null)
[    7.091923] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null)
[    7.222612] Adding 2097148k swap on /dev/mapper/vg-sysswap.  Priority:-1 extents:1 across:2097148k 
[    7.636709] usb 2-1: new low speed USB device number 2 using ohci_hcd
[    8.113401] usb 2-2: new low speed USB device number 3 using ohci_hcd
[    8.425852] Initializing USB Mass Storage driver...
[    8.425899] usbcore: registered new interface driver usb-storage
[    8.425901] USB Mass Storage support registered.
[    8.431266] input: SIGMACH1P USB Keykoard as /devices/pci0000:00/0000:00:02.0/usb2/2-1/2-1:1.0/input/input4
[    8.431392] generic-usb 0003:1C4F:000E.0001: input,hidraw0: USB HID v1.10 Keyboard [SIGMACH1P USB Keykoard] on usb-0000:00:02.0-1/input0
[    8.432007] scsi4 : usb-storage 1-10:1.0
[    8.432121] usbcore: registered new interface driver ums-realtek
[    8.435060] usbcore: registered new interface driver uas
[    8.832284] forcedeth 0000:00:07.0: irq 43 for MSI/MSI-X
[    9.442604] scsi 4:0:0:0: Direct-Access     Generic- Multi-Card       1.00 PQ: 0 ANSI: 0 CCS
[    9.444463] scsi: killing requests for dead queue
[    9.444563] scsi: killing requests for dead queue
[    9.445813] sd 4:0:0:0: [sdd] Attached SCSI removable disk
[    9.445818] scsi: killing requests for dead queue
[    9.447092] scsi: killing requests for dead queue
[    9.447168] scsi: killing requests for dead queue
[    9.448485] scsi: killing requests for dead queue
[    9.449732] scsi: killing requests for dead queue
[    9.450980] scsi: killing requests for dead queue
[   11.019645] NET: Registered protocol family 10
[   11.188745] RPC: Registered named UNIX socket transport module.
[   11.188748] RPC: Registered udp transport module.
[   11.188750] RPC: Registered tcp transport module.
[   11.188751] RPC: Registered tcp NFSv4.1 backchannel transport module.
[   11.240063] FS-Cache: Loaded
[   11.266563] FS-Cache: Netfs 'nfs' registered for caching
[   11.297681] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[   18.437081] generic-usb 0003:1C4F:000E.0002: usb_submit_urb(ctrl) failed
[   18.437142] generic-usb 0003:1C4F:000E.0002: timeout initializing reports
[   18.437239] input: SIGMACH1P USB Keykoard as /devices/pci0000:00/0000:00:02.0/usb2/2-1/2-1:1.1/input/input5
[   18.437358] generic-usb 0003:1C4F:000E.0002: input,hidraw1: USB HID v1.10 Device [SIGMACH1P USB Keykoard] on usb-0000:00:02.0-1/input1
[   18.443278] input: Kensington      Kensington Expert Mouse as /devices/pci0000:00/0000:00:02.0/usb2/2-2/2-2:1.0/input/input6
[   18.443431] generic-usb 0003:047D:1020.0003: input,hidraw2: USB HID v1.10 Mouse [Kensington      Kensington Expert Mouse] on usb-0000:00:02.0-2/input0
[   18.443451] usbcore: registered new interface driver usbhid
[   18.443453] usbhid: USB HID core driver

#lspci

00:00.0 RAM memory: nVidia Corporation MCP61 LPC Bridge (rev a1)
00:01.0 ISA bridge: nVidia Corporation MCP61 LPC Bridge (rev a2)
00:01.1 SMBus: nVidia Corporation MCP61 SMBus (rev a2)
00:01.2 RAM memory: nVidia Corporation MCP61 Memory Controller (rev a2)
00:02.0 USB controller: nVidia Corporation MCP61 USB Controller (rev a3)
00:02.1 USB controller: nVidia Corporation MCP61 USB Controller (rev a3)
00:04.0 PCI bridge: nVidia Corporation MCP61 PCI bridge (rev a1)
00:05.0 Audio device: nVidia Corporation MCP61 High Definition Audio (rev a2)
00:06.0 IDE interface: nVidia Corporation MCP61 IDE (rev a2)
00:07.0 Bridge: nVidia Corporation MCP61 Ethernet (rev a2)
00:08.0 IDE interface: nVidia Corporation MCP61 SATA Controller (rev a2)
00:09.0 PCI bridge: nVidia Corporation MCP61 PCI Express bridge (rev a2)
00:0b.0 PCI bridge: nVidia Corporation MCP61 PCI Express bridge (rev a2)
00:0c.0 PCI bridge: nVidia Corporation MCP61 PCI Express bridge (rev a2)
00:0d.0 VGA compatible controller: nVidia Corporation C61 [GeForce 7025 / nForce 630a] (rev a2)
00:18.0 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor HyperTransport Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Miscellaneous Control
00:18.4 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Link Control
01:06.0 Modem: PCTel Inc HSP MicroModem 56 (rev 02)

#lsusb

Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 004: ID 0bda:0158 Realtek Semiconductor Corp. USB 2.0 multicard reader
Bus 002 Device 002: ID 1c4f:000e SiGma Micro 
Bus 002 Device 003: ID 047d:1020 Kensington Expert Mouse Trackball

#lsmod

Module                  Size  Used by
joydev                  9895  0 
nfsd                  298214  2 
exportfs                3695  1 nfsd
nfs                   308772  1 
lockd                  73584  2 nfsd,nfs
fscache                41098  1 nfs
auth_rpcgss            41935  2 nfsd,nfs
nfs_acl                 2359  2 nfsd,nfs
sunrpc                198989  17 nfsd,nfs,lockd,auth_rpcgss,nfs_acl
ipv6                  288122  30 
uas                     8088  0 
ums_realtek             7133  0 
usb_storage            44423  1 ums_realtek
usbhid                 35352  0 
hid                    82435  1 usbhid
ext2                   63283  1 
nvidia              11695863  30 
snd_hda_codec_realtek   282216  1 
i2c_nforce2             5128  0 
ohci_hcd               21714  0 
psmouse                55501  0 
ehci_hcd               40794  0 
serio_raw               4294  0 
i2c_core               20460  2 nvidia,i2c_nforce2
edac_core              37552  0 
edac_mce_amd           13215  0 
pcspkr                  1819  0 
forcedeth              53012  0 
usbcore               144144  7 uas,ums_realtek,usb_storage,usbhid,ohci_hcd,ehci_hcd
evdev                   9530  5 
asus_atk0110           10131  0 
button                  4470  0 
snd_hda_intel          22410  1 
snd_hda_codec          80889  2 snd_hda_codec_realtek,snd_hda_intel
snd_hwdep               6357  1 snd_hda_codec
k10temp                 2883  0 
processor              24224  0 
snd_pcm_oss            38850  0 
snd_pcm                74368  3 snd_hda_intel,snd_hda_codec,snd_pcm_oss
snd_page_alloc          7153  2 snd_hda_intel,snd_pcm
snd_mixer_oss          15275  2 snd_pcm_oss
snd_seq_dummy           1463  0 
snd_seq_oss            29172  0 
snd_seq_midi_event      5660  1 snd_seq_oss
snd_seq                50849  5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
snd_timer              19544  2 snd_pcm,snd_seq
snd_seq_device          5300  3 snd_seq_dummy,snd_seq_oss,snd_seq
snd                    58362  11 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm_oss,snd_pcm,snd_mixer_oss,snd_seq_oss,snd_seq,snd_timer,snd_seq_device
soundcore               6210  2 snd
ext4                  375413  2 
mbcache                 5881  2 ext2,ext4
jbd2                   70667  1 ext4
crc16                   1359  1 ext4
dm_mod                 69692  11 
sr_mod                 14951  0 
cdrom                  36553  1 sr_mod
sd_mod                 28275  7 
pata_acpi               3376  0 
sata_nv                21292  2 
pata_amd               11363  2 
libata                166724  3 pata_acpi,sata_nv,pata_amd
scsi_mod              132794  5 uas,usb_storage,sr_mod,sd_mod,libata

Thanks for the help!

phunni

Member

From: Bristol, UK

Registered: 2003-08-13

Posts: 770

Re: kernel USB error

Any clues?

phunni

Member

From: Bristol, UK

Registered: 2003-08-13

Posts: 770

Re: kernel USB error

bump - Nothing from that stuff I posted?

phunni

Member

From: Bristol, UK

Registered: 2003-08-13

Posts: 770

Re: kernel USB error

Still no ideas?  Is there anything else I can check/post?

samuvuo

Member

From: Finland

Registered: 2011-02-20

Posts: 84

Re: kernel USB error

Try booting with all other USB-devices except the keyboard unplugged. Any change?

szalski

Member

Registered: 2011-10-08

Posts: 7

Re: kernel USB error

Hi,

I have an identical problem. The culprit is a USB keyboard (cheapest one). I've tried unplugging every USB device except the keyboard - didn't help. What was slightly different was that the keyboard had no name in the output of lsusb in my case (just the "id").

I also couldn't find a solution, but I have found a workaround.

Fortunately my motherboard still had the mixed PS/2 socket and I used this USB -> PS/2 adapter to connect my keyboard.

It's not pretty but works great, no delay at all.

I still would like to know the cause though.

Regards,
szalski

luieburger

Member

Registered: 2013-07-27

Posts: 10

Re: kernel USB error

I'm also running into this issue. Did anybody ever solve this problem?

luieburger

Member

Registered: 2013-07-27

Posts: 10

Re: kernel USB error

Update:

The problem occurs when my USB joystick is plugged into my integrated USB 2 ports. My motherboard is an ASROCK Z77 Extreme4-m. Bios is 1.7, just upgraded. The joystick is a Logitech Attack 3.

Any time the joystick is plugged into the same USB controller as something else, the the keyboard is locked up until the error is thrown. If I have the mouse and keyboard plugged into USB 3, and the joystick is on USB2, the error is still thrown but the keyboard and mosue don't lock up.

I just switched from Mint 15 and it never had any problems with this. Fedora 19 doesn't have the problem either. I never noticed it until I tried Arch.

Obviously the solution is to unplug the joystick, but that's not a real fix.