You are not logged in.
I have a Packard Bell EasyNote R1926 laptop and am posting this now to hopefully get some help. The issue is as following: The usb ports do not work, it seems to be an ACPI-related issue, that appears to be relating to the chipset rather than software. I have however not been able to find anybody else with the same laptop and problems. For other linux distros (Lubuntu and Puppy linux) this problem affects the WiFi-card disabling wifi-connection (Arch being the only distro able to support wifi). This is the dmesg:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.1.1-1-ARCH (tobias@T-POWA-LX) (gcc version 4.6.2 (GCC) ) #1 SMP PREEMPT Fri Nov 11 22:05:37 UTC 2011
[ 0.000000] Disabled fast string operations
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000001bfef000 (usable)
[ 0.000000] BIOS-e820: 000000001bff0000 - 000000001bffffc0 (ACPI data)
[ 0.000000] BIOS-e820: 000000001bffffc0 - 000000001c000000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[ 0.000000] Notice: NX (Execute Disable) protection missing in CPU!
[ 0.000000] DMI 2.3 present.
[ 0.000000] DMI: Packard Bell Computers International Packard Bell EasyNote/NEC Versa Premium , BIOS R1.04 /14/0620\x0d\x0a
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] last_pfn = 0x1bfef max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-DFFFF uncachable
[ 0.000000] E0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask FF0000000 write-back
[ 0.000000] 1 base 010000000 mask FF8000000 write-back
[ 0.000000] 2 base 018000000 mask FFC000000 write-back
[ 0.000000] 3 base 090000000 mask FFC000000 write-combining
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 base 0A0000000 mask FFE000000 write-combining
[ 0.000000] PAT not supported by CPU.
[ 0.000000] initial memory mapped : 0 - 00c00000
[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[ 0.000000] init_memory_mapping: 0000000000000000-000000001bfef000
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 001bc00000 page 2M
[ 0.000000] 001bc00000 - 001bfef000 page 4k
[ 0.000000] kernel direct mapping tables up to 1bfef000 @ bfb000-c00000
[ 0.000000] RAMDISK: 03e57000 - 04080000
[ 0.000000] ACPI: RSDP 000e6010 00014 (v00 OID_00)
[ 0.000000] ACPI: RSDT 1bffc2d0 0002C (v01 INSYDE FACP_000 00000100 0000 00010200)
[ 0.000000] ACPI: FACP 1bfffb00 00074 (v01 INSYDE FACP_000 00000100 0000 00010200)
[ 0.000000] ACPI: DSDT 1bffc310 037E2 (v01 INSYDE PN800 00001000 INTL 02002036)
[ 0.000000] ACPI: FACS 1bffffc0 00040
[ 0.000000] ACPI: APIC 1bfffb90 00068 (v01 INSYDE APIC_000 30303030 0000 00010200)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 447MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 1bfef000
[ 0.000000] low ram: 0 - 1bfef000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x0001bfef
[ 0.000000] HighMem empty
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0001bfef
[ 0.000000] On node 0 totalpages: 114558
[ 0.000000] free_area_init_node: node 0, pgdat c05ce580, node_mem_map dbc6e200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 864 pages used for memmap
[ 0.000000] Normal zone: 109711 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 2 CPUs, 1 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 1c000000 (gap: 1c000000:e3f80000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 13 pages/cpu @db800000 s29632 r0 d23616 u2097152
[ 0.000000] pcpu-alloc: s29632 r0 d23616 u2097152 alloc=1*4194304
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 113662
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=/dev/disk/by-uuid/6b00fa16-4838-4f67-a6c5-5ab6d8e18c8d ro quiet splash
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 1834480 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (00000000:00000000)
[ 0.000000] Memory: 443704k/458684k available (3470k kernel code, 14528k reserved, 1485k data, 508k init, 0k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xdc7ef000 - 0xff7fe000 ( 560 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xdbfef000 ( 447 MB)
[ 0.000000] .init : 0xc05d7000 - 0xc0656000 ( 508 kB)
[ 0.000000] .data : 0xc0463a15 - 0xc05d6fc0 (1485 kB)
[ 0.000000] .text : 0xc0100000 - 0xc0463a15 (3470 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] Verbose stalled-CPUs detection is disabled.
[ 0.000000] NR_IRQS:512
[ 0.000000] CPU 0 irqstacks, hard=db40c000 soft=db40e000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1492.715 MHz processor.
[ 0.003336] Calibrating delay loop (skipped), value calculated using timer frequency.. 2986.82 BogoMIPS (lpj=4975716)
[ 0.003344] pid_max: default: 32768 minimum: 301
[ 0.003416] Security Framework initialized
[ 0.003427] AppArmor: AppArmor disabled by boot time parameter
[ 0.003467] Mount-cache hash table entries: 512
[ 0.003850] Initializing cgroup subsys cpuacct
[ 0.003874] Initializing cgroup subsys memory
[ 0.003893] Initializing cgroup subsys devices
[ 0.003897] Initializing cgroup subsys freezer
[ 0.003900] Initializing cgroup subsys net_cls
[ 0.003904] Initializing cgroup subsys blkio
[ 0.003963] Disabled fast string operations
[ 0.003974] mce: CPU supports 5 MCE banks
[ 0.003990] CPU0: Thermal monitoring enabled (TM1)
[ 0.004098] SMP alternatives: switching to UP code
[ 0.011428] ACPI: Core revision 20110623
[ 0.016679] ftrace: allocating 15582 entries in 31 pages
[ 0.020115] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.021178] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.054765] CPU0: Intel(R) Celeron(R) M processor 1.50GHz stepping 08
[ 0.056663] Performance Events: p6 PMU driver.
[ 0.056663] ... version: 0
[ 0.056663] ... bit width: 32
[ 0.056663] ... generic registers: 2
[ 0.056663] ... value mask: 00000000ffffffff
[ 0.056663] ... max period: 000000007fffffff
[ 0.056663] ... fixed-purpose events: 0
[ 0.056663] ... event mask: 0000000000000003
[ 0.073725] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.080002] Brought up 1 CPUs
[ 0.080007] Total of 1 processors activated (2986.82 BogoMIPS).
[ 0.082113] devtmpfs: initialized
[ 0.082419] PM: Registering ACPI NVS region at 1bffffc0 (64 bytes)
[ 0.084193] print_constraints: dummy:
[ 0.084308] NET: Registered protocol family 16
[ 0.084514] ACPI: bus type pci registered
[ 0.084728] PCI: PCI BIOS revision 2.10 entry at 0xe9b04, last bus=1
[ 0.084732] PCI: Using configuration type 1 for base access
[ 0.085652] bio: create slab <bio-0> at 0
[ 0.085779] ACPI: Added _OSI(Module Device)
[ 0.085783] ACPI: Added _OSI(Processor Device)
[ 0.085786] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.085789] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.086830] ACPI: EC: Look up EC in DSDT
[ 0.087953] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.090799] ACPI: Interpreter enabled
[ 0.090820] ACPI: (supports S0 S3 S4 S5)
[ 0.090849] ACPI: Using IOAPIC for interrupt routing
[ 0.101066] ACPI: EC: GPE = 0x1, I/O: command/status = 0x66, data = 0x62
[ 0.101214] ACPI: No dock devices found.
[ 0.101217] HEST: Table not found.
[ 0.101225] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.101348] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.101596] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
[ 0.101601] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
[ 0.101605] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[ 0.101609] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000cffff] (ignored)
[ 0.101613] pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff] (ignored)
[ 0.101618] pci_root PNP0A03:00: host bridge window [mem 0xfff80000-0xffffffff] (ignored)
[ 0.101622] pci_root PNP0A03:00: host bridge window [mem 0x1c000000-0xfedfffff] (ignored)
[ 0.101647] pci 0000:00:00.0: [1106:0259] type 0 class 0x000600
[ 0.101662] pci 0000:00:00.0: reg 10: [mem 0xa0000000-0xa1ffffff pref]
[ 0.101741] pci 0000:00:00.1: [1106:1259] type 0 class 0x000600
[ 0.101795] pci 0000:00:00.2: [1106:2259] type 0 class 0x000600
[ 0.101848] pci 0000:00:00.3: [1106:3259] type 0 class 0x000600
[ 0.101901] pci 0000:00:00.4: [1106:4259] type 0 class 0x000600
[ 0.101957] pci 0000:00:00.7: [1106:7259] type 0 class 0x000600
[ 0.102014] pci 0000:00:01.0: [1106:b198] type 1 class 0x000604
[ 0.102068] pci 0000:00:01.0: supports D1
[ 0.102095] pci 0000:00:06.0: [1814:0301] type 0 class 0x000280
[ 0.102116] pci 0000:00:06.0: reg 10: [mem 0xffff8000-0xffffffff]
[ 0.102226] pci 0000:00:10.0: [1106:3038] type 0 class 0x000c03
[ 0.102284] pci 0000:00:10.0: reg 20: [io 0x1200-0x121f]
[ 0.102325] pci 0000:00:10.0: supports D1 D2
[ 0.102329] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.102335] pci 0000:00:10.0: PME# disabled
[ 0.102356] pci 0000:00:10.1: [1106:3038] type 0 class 0x000c03
[ 0.102414] pci 0000:00:10.1: reg 20: [io 0x1220-0x123f]
[ 0.102455] pci 0000:00:10.1: supports D1 D2
[ 0.102458] pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.102464] pci 0000:00:10.1: PME# disabled
[ 0.102485] pci 0000:00:10.2: [1106:3038] type 0 class 0x000c03
[ 0.102543] pci 0000:00:10.2: reg 20: [io 0x1240-0x125f]
[ 0.102584] pci 0000:00:10.2: supports D1 D2
[ 0.102587] pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.102593] pci 0000:00:10.2: PME# disabled
[ 0.102614] pci 0000:00:10.3: [1106:3104] type 0 class 0x000c03
[ 0.102635] pci 0000:00:10.3: reg 10: [mem 0x00000000-0x000000ff]
[ 0.102713] pci 0000:00:10.3: supports D1 D2
[ 0.102716] pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.102722] pci 0000:00:10.3: PME# disabled
[ 0.102750] pci 0000:00:11.0: [1106:3177] type 0 class 0x000601
[ 0.102830] HPET not enabled in BIOS. You might try hpet=force boot option
[ 0.102839] pci 0000:00:11.0: quirk: [io 0x1000-0x107f] claimed by vt8235 PM
[ 0.102845] pci 0000:00:11.0: quirk: [io 0x1400-0x140f] claimed by vt8235 SMB
[ 0.102887] pci 0000:00:11.1: [1106:0571] type 0 class 0x000101
[ 0.102947] pci 0000:00:11.1: reg 20: [io 0x1100-0x110f]
[ 0.103014] pci 0000:00:11.5: [1106:3059] type 0 class 0x000401
[ 0.103036] pci 0000:00:11.5: reg 10: [io 0xe000-0xe0ff]
[ 0.103117] pci 0000:00:11.5: supports D1 D2
[ 0.103138] pci 0000:00:11.6: [1106:3068] type 0 class 0x000780
[ 0.103160] pci 0000:00:11.6: reg 10: [io 0xe100-0xe1ff]
[ 0.103261] pci 0000:00:12.0: [1106:3065] type 0 class 0x000200
[ 0.103282] pci 0000:00:12.0: reg 10: [io 0xe200-0xe2ff]
[ 0.103295] pci 0000:00:12.0: reg 14: [mem 0xd0000000-0xd00000ff]
[ 0.103378] pci 0000:00:12.0: supports D1 D2
[ 0.103381] pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.103387] pci 0000:00:12.0: PME# disabled
[ 0.103456] pci 0000:01:00.0: [1106:3118] type 0 class 0x000300
[ 0.103476] pci 0000:01:00.0: reg 10: [mem 0x90000000-0x93ffffff pref]
[ 0.103487] pci 0000:01:00.0: reg 14: [mem 0xc0000000-0xc0ffffff]
[ 0.103527] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0000ffff pref]
[ 0.103549] pci 0000:01:00.0: supports D1 D2
[ 0.103594] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.103600] pci 0000:00:01.0: bridge window [io 0xc000-0xdfff]
[ 0.103606] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xcfffffff]
[ 0.103613] pci 0000:00:01.0: bridge window [mem 0x90000000-0x9fffffff pref]
[ 0.103625] pci_bus 0000:00: on NUMA node 0
[ 0.103630] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.104002] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x1e)
[ 0.114518] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 *11 14 15)
[ 0.114597] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 *7 10 11 14 15)
[ 0.114673] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 7 10 11 14 15)
[ 0.114748] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 *10 11 14 15)
[ 0.114813] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
[ 0.114879] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
[ 0.114945] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
[ 0.115011] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
[ 0.115080] ACPI: PCI Interrupt Link [ALKA] (IRQs 20) *0, disabled.
[ 0.115160] ACPI: PCI Interrupt Link [ALKB] (IRQs 23) *11
[ 0.115285] ACPI: PCI Interrupt Link [ALKC] (IRQs 22) *5, disabled.
[ 0.115327] ACPI Exception: AE_AML_INVALID_RESOURCE_TYPE, Evaluating _CRS (20110623/pci_link-282)
[ 0.115334] ACPI: PCI Interrupt Link [ALKD] (IRQs 21) *0
[ 0.115475] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.115479] vgaarb: loaded
[ 0.115481] vgaarb: bridge control possible 0000:01:00.0
[ 0.115637] PCI: Using ACPI for IRQ routing
[ 0.115643] PCI: pci_cache_line_size set to 64 bytes
[ 0.115722] reserve RAM buffer: 000000000009fc00 - 000000000009ffff
[ 0.115726] reserve RAM buffer: 000000001bfef000 - 000000001bffffff
[ 0.115922] NetLabel: Initializing
[ 0.115926] NetLabel: domain hash size = 128
[ 0.115928] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.115951] NetLabel: unlabeled traffic allowed by default
[ 0.127844] pnp: PnP ACPI init
[ 0.127889] ACPI: bus type pnp registered
[ 0.130220] pnp 00:00: [bus 00-ff]
[ 0.130226] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.130230] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.130234] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.130238] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.130242] pnp 00:00: [mem 0x000c0000-0x000cffff window]
[ 0.130246] pnp 00:00: [mem 0x000d0000-0x000dffff window]
[ 0.130249] pnp 00:00: [mem 0xfff80000-0xffffffff]
[ 0.130253] pnp 00:00: [mem 0x1c000000-0xfedfffff window]
[ 0.130371] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.130580] pnp 00:01: [irq 12]
[ 0.130633] pnp 00:01: Plug and Play ACPI device, IDs SYN0c02 SYN0c00 PNP0f13 (active)
[ 0.130663] pnp 00:02: [irq 1]
[ 0.130667] pnp 00:02: [io 0x0060]
[ 0.130670] pnp 00:02: [io 0x0064]
[ 0.130736] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.130752] pnp 00:03: [io 0x0070-0x0075]
[ 0.130760] pnp 00:03: [irq 8]
[ 0.130807] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.130822] pnp 00:04: [io 0x0061]
[ 0.130868] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.130907] pnp 00:05: [mem 0x000e0000-0x000fffff]
[ 0.130917] pnp 00:05: [mem 0xfff80000-0xffffffff]
[ 0.130920] pnp 00:05: [mem 0xfec00000-0xfec00fff]
[ 0.130924] pnp 00:05: [mem 0xfee00000-0xfee00fff]
[ 0.131023] system 00:05: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.131028] system 00:05: [mem 0xfff80000-0xffffffff] could not be reserved
[ 0.131032] system 00:05: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.131037] system 00:05: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.131042] system 00:05: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.131063] pnp 00:06: [dma 4]
[ 0.131066] pnp 00:06: [io 0x0000-0x001f]
[ 0.131070] pnp 00:06: [io 0x0081-0x008f]
[ 0.131073] pnp 00:06: [io 0x0090-0x0091]
[ 0.131076] pnp 00:06: [io 0x0093-0x009f]
[ 0.131079] pnp 00:06: [io 0x00c0-0x00df]
[ 0.131134] pnp 00:06: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.131149] pnp 00:07: [io 0x0080]
[ 0.131152] pnp 00:07: [io 0x0092]
[ 0.131156] pnp 00:07: [io 0x0330-0x0331]
[ 0.131159] pnp 00:07: [io 0x04d0-0x04d1]
[ 0.131162] pnp 00:07: [io 0x1000-0x107f]
[ 0.131166] pnp 00:07: [io 0x1400-0x140f]
[ 0.131169] pnp 00:07: [io 0x0022]
[ 0.131172] pnp 00:07: [io 0x002e-0x002f]
[ 0.131175] pnp 00:07: [io 0x0074-0x0075]
[ 0.131178] pnp 00:07: [io 0x00a8-0x00a9]
[ 0.131250] system 00:07: [io 0x0330-0x0331] has been reserved
[ 0.131254] system 00:07: [io 0x04d0-0x04d1] has been reserved
[ 0.131259] system 00:07: [io 0x1000-0x107f] has been reserved
[ 0.131263] system 00:07: [io 0x1400-0x140f] has been reserved
[ 0.131268] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.131282] pnp 00:08: [io 0x00f0-0x00ff]
[ 0.131291] pnp 00:08: [irq 13]
[ 0.131338] pnp 00:08: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.131559] pnp: PnP ACPI: found 9 devices
[ 0.131562] ACPI: ACPI bus type pnp unregistered
[ 0.170278] Switching to clocksource acpi_pm
[ 0.170315] PCI: max bus depth: 1 pci_try_num: 2
[ 0.170344] pci 0000:00:10.3: BAR 0: assigned [mem 0x1c000000-0x1c0000ff]
[ 0.170354] pci 0000:00:10.3: BAR 0: set to [mem 0x1c000000-0x1c0000ff] (PCI address [0x1c000000-0x1c0000ff])
[ 0.170361] pci 0000:01:00.0: BAR 6: assigned [mem 0x94000000-0x9400ffff pref]
[ 0.170366] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.170372] pci 0000:00:01.0: bridge window [io 0xc000-0xdfff]
[ 0.170379] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xcfffffff]
[ 0.170386] pci 0000:00:01.0: bridge window [mem 0x90000000-0x9fffffff pref]
[ 0.170409] pci 0000:00:01.0: setting latency timer to 64
[ 0.170415] pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
[ 0.170419] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff]
[ 0.170423] pci_bus 0000:01: resource 0 [io 0xc000-0xdfff]
[ 0.170427] pci_bus 0000:01: resource 1 [mem 0xc0000000-0xcfffffff]
[ 0.170431] pci_bus 0000:01: resource 2 [mem 0x90000000-0x9fffffff pref]
[ 0.170527] NET: Registered protocol family 2
[ 0.170668] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.170962] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.171138] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.171325] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.171329] TCP reno registered
[ 0.171334] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.171351] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.171511] NET: Registered protocol family 1
[ 0.171550] pci 0000:00:01.0: disabling DAC on VIA PCI bridge
[ 0.171625] pci 0000:01:00.0: Boot video device
[ 0.171630] PCI: CLS 16 bytes, default 64
[ 0.171720] Unpacking initramfs...
[ 0.173068] Switched to NOHz mode on CPU #0
[ 0.232816] Freeing initrd memory: 2212k freed
[ 0.236354] apm: BIOS not found.
[ 0.236849] audit: initializing netlink socket (disabled)
[ 0.236875] type=2000 audit(1322343773.236:1): initialized
[ 0.240658] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.243653] VFS: Disk quotas dquot_6.5.2
[ 0.243802] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.244003] msgmni has been set to 870
[ 0.244305] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.244372] io scheduler noop registered
[ 0.244375] io scheduler deadline registered
[ 0.244394] io scheduler cfq registered (default)
[ 0.244851] ERST: Table is not found!
[ 0.244854] GHES: HEST is not enabled!
[ 0.244876] isapnp: Scanning for PnP cards...
[ 0.601793] isapnp: No Plug & Play device found
[ 0.601931] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.627135] i8042: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.638453] i8042: Detected active multiplexing controller, rev 1.1
[ 0.643460] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.643512] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 0.643551] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 0.643590] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 0.643632] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 0.643770] mousedev: PS/2 mouse device common for all mice
[ 0.644078] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 0.644135] rtc0: alarms up to one year, y3k, 242 bytes nvram
[ 0.644167] cpuidle: using governor ladder
[ 0.644170] cpuidle: using governor menu
[ 0.644518] TCP cubic registered
[ 0.644523] NET: Registered protocol family 17
[ 0.644539] Registering the dns_resolver key type
[ 0.644577] Using IPI No-Shortcut mode
[ 0.644732] PM: Hibernation image not present or could not be loaded.
[ 0.644742] registered taskstats version 1
[ 0.645097] rtc_cmos 00:03: setting system clock to 2011-11-26 21:42:54 UTC (1322343774)
[ 0.645165] Initializing network drop monitor service
[ 0.645278] Freeing unused kernel memory: 508k freed
[ 0.645685] Write protecting the kernel text: 3472k
[ 0.645716] Write protecting the kernel read-only data: 1076k
[ 0.651929] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.663651] udevd[32]: starting version 175
[ 0.872707] usbcore: registered new interface driver usbfs
[ 0.872751] usbcore: registered new interface driver hub
[ 0.875900] usbcore: registered new device driver usb
[ 0.879003] SCSI subsystem initialized
[ 0.881870] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.893411] ehci_hcd 0000:00:10.3: BAR 0: set to [mem 0x1c000000-0x1c0000ff] (PCI address [0x1c000000-0x1c0000ff])
[ 0.893429] ehci_hcd 0000:00:10.3: enabling device (0000 -> 0002)
[ 0.893531] ACPI Exception: AE_AML_INVALID_RESOURCE_TYPE, Evaluating _CRS (20110623/pci_link-282)
[ 0.893539] ACPI: Unable to set IRQ for PCI Interrupt Link [ALKD]. Try pci=noacpi or acpi=off
[ 0.893602] ehci_hcd 0000:00:10.3: PCI INT D: no GSI - using ISA IRQ 10
[ 0.893661] ehci_hcd 0000:00:10.3: EHCI Host Controller
[ 0.893737] ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 1
[ 0.893829] ehci_hcd 0000:00:10.3: irq 10, io mem 0x1c000000
[ 0.903427] ehci_hcd 0000:00:10.3: USB 2.0 started, EHCI 1.00
[ 0.903798] hub 1-0:1.0: USB hub found
[ 0.903809] hub 1-0:1.0: 6 ports detected
[ 0.925434] libata version 3.00 loaded.
[ 0.926208] pata_via 0000:00:11.1: version 0.3.4
[ 0.926307] ACPI: PCI Interrupt Link [ALKA] disabled and referenced, BIOS bug
[ 0.926362] ACPI: PCI Interrupt Link [ALKA] BIOS reported IRQ 0, using IRQ 20
[ 0.926366] ACPI: PCI Interrupt Link [ALKA] enabled at IRQ 20
[ 0.926388] pata_via 0000:00:11.1: PCI INT A -> Link[ALKA] -> GSI 20 (level, low) -> IRQ 20
[ 0.928220] scsi0 : pata_via
[ 0.928483] scsi1 : pata_via
[ 0.932545] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x1100 irq 14
[ 0.932551] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x1108 irq 15
[ 0.987794] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.000040] uhci_hcd 0000:00:10.0: BAR 4: set to [io 0x1200-0x121f] (PCI address [0x1200-0x121f])
[ 1.000148] ACPI Exception: AE_AML_INVALID_RESOURCE_TYPE, Evaluating _CRS (20110623/pci_link-282)
[ 1.000156] ACPI: Unable to set IRQ for PCI Interrupt Link [ALKD]. Try pci=noacpi or acpi=off
[ 1.000218] uhci_hcd 0000:00:10.0: PCI INT A: no GSI - using ISA IRQ 11
[ 1.000261] uhci_hcd 0000:00:10.0: UHCI Host Controller
[ 1.000294] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
[ 1.000363] uhci_hcd 0000:00:10.0: irq 11, io base 0x00001200
[ 1.000676] hub 2-0:1.0: USB hub found
[ 1.000685] hub 2-0:1.0: 2 ports detected
[ 1.013355] uhci_hcd 0000:00:10.1: BAR 4: set to [io 0x1220-0x123f] (PCI address [0x1220-0x123f])
[ 1.013402] ACPI Exception: AE_AML_INVALID_RESOURCE_TYPE, Evaluating _CRS (20110623/pci_link-282)
[ 1.013409] ACPI: Unable to set IRQ for PCI Interrupt Link [ALKD]. Try pci=noacpi or acpi=off
[ 1.013464] uhci_hcd 0000:00:10.1: PCI INT B: no GSI - using ISA IRQ 7
[ 1.013492] uhci_hcd 0000:00:10.1: UHCI Host Controller
[ 1.013506] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
[ 1.013562] uhci_hcd 0000:00:10.1: irq 7, io base 0x00001220
[ 1.013777] hub 3-0:1.0: USB hub found
[ 1.013783] hub 3-0:1.0: 2 ports detected
[ 1.026690] uhci_hcd 0000:00:10.2: BAR 4: set to [io 0x1240-0x125f] (PCI address [0x1240-0x125f])
[ 1.026735] ACPI Exception: AE_AML_INVALID_RESOURCE_TYPE, Evaluating _CRS (20110623/pci_link-282)
[ 1.026742] ACPI: Unable to set IRQ for PCI Interrupt Link [ALKD]. Try pci=noacpi or acpi=off
[ 1.026797] uhci_hcd 0000:00:10.2: PCI INT C: no GSI - using ISA IRQ 5
[ 1.026821] uhci_hcd 0000:00:10.2: UHCI Host Controller
[ 1.026836] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
[ 1.026887] uhci_hcd 0000:00:10.2: irq 5, io base 0x00001240
[ 1.027209] hub 4-0:1.0: USB hub found
[ 1.027216] hub 4-0:1.0: 2 ports detected
[ 1.090642] ata1.00: ATA-6: ST960821A, 3.08, max UDMA/100
[ 1.090648] ata1.00: 117210240 sectors, multi 16: LBA48
[ 1.103814] ata1.00: configured for UDMA/100
[ 1.104070] scsi 0:0:0:0: Direct-Access ATA ST960821A 3.08 PQ: 0 ANSI: 5
[ 1.210021] usb 1-1: new high speed USB device number 2 using ehci_hcd
[ 1.243350] Refined TSC clocksource calibration: 1492.670 MHz.
[ 1.243359] Switching to clocksource tsc
[ 1.263763] ata2.00: ATAPI: _NEC DVD_RW ND-6750A, 2.61, max UDMA/33
[ 1.276961] ata2.00: configured for UDMA/33
[ 1.278722] scsi 1:0:0:0: CD-ROM _NEC DVD_RW ND-6750A 2.61 PQ: 0 ANSI: 5
[ 1.292909] sd 0:0:0:0: [sda] 117210240 512-byte logical blocks: (60.0 GB/55.8 GiB)
[ 1.292985] sd 0:0:0:0: [sda] Write Protect is off
[ 1.292990] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.293022] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.339501] sda: sda1 sda2 sda3 sda4
[ 1.339503] sda4: <bsd:bad subpartition - ignored
[ 1.339505] bad subpartition - ignored
[ 1.339506] bad subpartition - ignored
[ 1.339507] bad subpartition - ignored
[ 1.339509] >
[ 1.340085] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.345253] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[ 1.345263] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.346069] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.976627] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[ 3.292419] udevd[202]: starting version 175
[ 3.711458] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
[ 3.716784] ACPI: Lid Switch [LID]
[ 3.716906] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
[ 3.716920] ACPI: Sleep Button [SBTN]
[ 3.717016] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 3.717022] ACPI: Power Button [PWRF]
[ 3.723542] ACPI: AC Adapter [AC] (on-line)
[ 3.774813] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:01/LNXVIDEO:00/input/input4
[ 3.774831] ACPI: Video Device [VGA0] (multi-head: yes rom: no post: no)
[ 3.778594] ACPI: acpi_idle registered with cpuidle
[ 3.778935] Marking TSC unstable due to TSC halts in idle
[ 3.781470] Switching to clocksource acpi_pm
[ 3.796664] thermal LNXTHERM:00: registered as thermal_zone0
[ 3.796752] ACPI: Thermal Zone [TZ0] (0 C)
[ 3.802771] ACPI: Battery Slot [BAT0] (battery present)
[ 3.845910] Linux agpgart interface v0.103
[ 3.847147] agpgart: Detected VIA PM800/PN800/PM880/PN880 chipset
[ 3.852032] agpgart-via 0000:00:00.0: AGP aperture is 32M @ 0xa0000000
[ 3.876849] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 3.999719] via_rhine: v1.10-LK1.5.0 2010-10-09 Written by Donald Becker
[ 3.999969] ACPI: PCI Interrupt Link [ALKB] BIOS reported IRQ 11, using IRQ 23
[ 3.999973] ACPI: PCI Interrupt Link [ALKB] enabled at IRQ 23
[ 3.999997] via-rhine 0000:00:12.0: PCI INT A -> Link[ALKB] -> GSI 23 (level, low) -> IRQ 23
[ 4.004668] via-rhine 0000:00:12.0: eth0: VIA Rhine II at 0x1e200, 00:40:d0:99:d7:0e, IRQ 23
[ 4.005386] via-rhine 0000:00:12.0: eth0: MII PHY found at address 1, status 0x7849 advertising 05e1 Link 0000
[ 4.117373] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 4.126195] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 4.201125] cfg80211: Calling CRDA to update world regulatory domain
[ 4.251104] NET: Registered protocol family 23
[ 4.503293] ACPI: PCI Interrupt Link [ALKC] disabled and referenced, BIOS bug
[ 4.503480] ACPI: PCI Interrupt Link [ALKC] BIOS reported IRQ 5, using IRQ 22
[ 4.503484] ACPI: PCI Interrupt Link [ALKC] enabled at IRQ 22
[ 4.503507] snd_via82xx_modem 0000:00:11.6: PCI INT C -> Link[ALKC] -> GSI 22 (level, low) -> IRQ 22
[ 4.506696] snd_via82xx_modem 0000:00:11.6: setting latency timer to 64
[ 4.825108] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x1a0b3, caps: 0xa04713/0x200000/0x0
[ 4.877029] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio3/input/input6
[ 5.014795] snd_via82xx 0000:00:11.5: power state changed by ACPI to D0
[ 5.014805] snd_via82xx 0000:00:11.5: power state changed by ACPI to D0
[ 5.014825] snd_via82xx 0000:00:11.5: PCI INT C -> Link[ALKC] -> GSI 22 (level, low) -> IRQ 22
[ 5.014984] snd_via82xx 0000:00:11.5: setting latency timer to 64
[ 5.530300] rt61pci 0000:00:06.0: enabling device (0000 -> 0002)
[ 5.530329] rt61pci 0000:00:06.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 5.530347] rt61pci 0000:00:06.0: setting latency timer to 64
[ 5.801433] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 5.801961] Registered led device: rt61pci-phy0::radio
[ 5.801993] Registered led device: rt61pci-phy0::assoc
[ 6.210045] ehci_hcd 0000:00:10.3: Unlink after no-IRQ? Controller is probably using the wrong IRQ.
[ 16.753361] usb 1-1: device not accepting address 2, error -110
[ 16.860029] usb 1-1: new high speed USB device number 3 using ehci_hcd
[ 32.403358] usb 1-1: device not accepting address 3, error -110
[ 32.510027] usb 1-1: new high speed USB device number 4 using ehci_hcd
[ 34.314503] EXT4-fs (sda3): re-mounted. Opts: (null)
[ 34.646281] Adding 265068k swap on /dev/sda2. Priority:-1 extents:1 across:265068k
[ 42.936704] usb 1-1: device not accepting address 4, error -110
[ 43.043371] usb 1-1: new high speed USB device number 5 using ehci_hcd
[ 43.138023] wlan0: authenticate with 00:0b:2b:3f:ea:ba (try 1)
[ 43.143811] wlan0: authenticated
[ 43.143938] wlan0: associate with 00:0b:2b:3f:ea:ba (try 1)
[ 43.152219] wlan0: RX AssocResp from 00:0b:2b:3f:ea:ba (capab=0x411 status=0 aid=1)
[ 43.152225] wlan0: associated
[ 53.470059] usb 1-1: device not accepting address 5, error -110
[ 53.470158] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 102.847842] Initializing USB Mass Storage driver...
[ 102.848261] usbcore: registered new interface driver usb-storage
[ 102.848264] USB Mass Storage support registered.
[ 110.810695] usbcore: registered new interface driver usbhid
[ 110.810700] usbhid: USB HID core driverAnd this is the dmesg when booting with a USB stick inserted:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.1.1-1-ARCH (tobias@T-POWA-LX) (gcc version 4.6.2 (GCC) ) #1 SMP PREEMPT Fri Nov 11 22:05:37 UTC 2011
[ 0.000000] Disabled fast string operations
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000001bfef000 (usable)
[ 0.000000] BIOS-e820: 000000001bff0000 - 000000001bffffc0 (ACPI data)
[ 0.000000] BIOS-e820: 000000001bffffc0 - 000000001c000000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[ 0.000000] Notice: NX (Execute Disable) protection missing in CPU!
[ 0.000000] DMI 2.3 present.
[ 0.000000] DMI: Packard Bell Computers International Packard Bell EasyNote/NEC Versa Premium , BIOS R1.04 /14/0620\x0d\x0a
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] last_pfn = 0x1bfef max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-DFFFF uncachable
[ 0.000000] E0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask FF0000000 write-back
[ 0.000000] 1 base 010000000 mask FF8000000 write-back
[ 0.000000] 2 base 018000000 mask FFC000000 write-back
[ 0.000000] 3 base 090000000 mask FFC000000 write-combining
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 base 0A0000000 mask FFE000000 write-combining
[ 0.000000] PAT not supported by CPU.
[ 0.000000] initial memory mapped : 0 - 00c00000
[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[ 0.000000] init_memory_mapping: 0000000000000000-000000001bfef000
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 001bc00000 page 2M
[ 0.000000] 001bc00000 - 001bfef000 page 4k
[ 0.000000] kernel direct mapping tables up to 1bfef000 @ bfb000-c00000
[ 0.000000] RAMDISK: 03e57000 - 04080000
[ 0.000000] ACPI: RSDP 000e6010 00014 (v00 OID_00)
[ 0.000000] ACPI: RSDT 1bffc2d0 0002C (v01 INSYDE FACP_000 00000100 0000 00010200)
[ 0.000000] ACPI: FACP 1bfffb00 00074 (v01 INSYDE FACP_000 00000100 0000 00010200)
[ 0.000000] ACPI: DSDT 1bffc310 037E2 (v01 INSYDE PN800 00001000 INTL 02002036)
[ 0.000000] ACPI: FACS 1bffffc0 00040
[ 0.000000] ACPI: APIC 1bfffb90 00068 (v01 INSYDE APIC_000 30303030 0000 00010200)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 447MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 1bfef000
[ 0.000000] low ram: 0 - 1bfef000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x0001bfef
[ 0.000000] HighMem empty
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0001bfef
[ 0.000000] On node 0 totalpages: 114558
[ 0.000000] free_area_init_node: node 0, pgdat c05ce580, node_mem_map dbc6e200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 864 pages used for memmap
[ 0.000000] Normal zone: 109711 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 2 CPUs, 1 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 1c000000 (gap: 1c000000:e3f80000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 13 pages/cpu @db800000 s29632 r0 d23616 u2097152
[ 0.000000] pcpu-alloc: s29632 r0 d23616 u2097152 alloc=1*4194304
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 113662
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=/dev/disk/by-uuid/6b00fa16-4838-4f67-a6c5-5ab6d8e18c8d ro quiet splash
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 1834480 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (00000000:00000000)
[ 0.000000] Memory: 443704k/458684k available (3470k kernel code, 14528k reserved, 1485k data, 508k init, 0k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xdc7ef000 - 0xff7fe000 ( 560 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xdbfef000 ( 447 MB)
[ 0.000000] .init : 0xc05d7000 - 0xc0656000 ( 508 kB)
[ 0.000000] .data : 0xc0463a15 - 0xc05d6fc0 (1485 kB)
[ 0.000000] .text : 0xc0100000 - 0xc0463a15 (3470 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] Verbose stalled-CPUs detection is disabled.
[ 0.000000] NR_IRQS:512
[ 0.000000] CPU 0 irqstacks, hard=db40c000 soft=db40e000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1492.843 MHz processor.
[ 0.003336] Calibrating delay loop (skipped), value calculated using timer frequency.. 2986.08 BogoMIPS (lpj=4976143)
[ 0.003344] pid_max: default: 32768 minimum: 301
[ 0.003416] Security Framework initialized
[ 0.003427] AppArmor: AppArmor disabled by boot time parameter
[ 0.003467] Mount-cache hash table entries: 512
[ 0.003848] Initializing cgroup subsys cpuacct
[ 0.003873] Initializing cgroup subsys memory
[ 0.003892] Initializing cgroup subsys devices
[ 0.003896] Initializing cgroup subsys freezer
[ 0.003899] Initializing cgroup subsys net_cls
[ 0.003903] Initializing cgroup subsys blkio
[ 0.003962] Disabled fast string operations
[ 0.003973] mce: CPU supports 5 MCE banks
[ 0.003988] CPU0: Thermal monitoring enabled (TM1)
[ 0.004097] SMP alternatives: switching to UP code
[ 0.011429] ACPI: Core revision 20110623
[ 0.016679] ftrace: allocating 15582 entries in 31 pages
[ 0.020116] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.021190] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.055361] CPU0: Intel(R) Celeron(R) M processor 1.50GHz stepping 08
[ 0.056663] Performance Events: p6 PMU driver.
[ 0.056663] ... version: 0
[ 0.056663] ... bit width: 32
[ 0.056663] ... generic registers: 2
[ 0.056663] ... value mask: 00000000ffffffff
[ 0.056663] ... max period: 000000007fffffff
[ 0.056663] ... fixed-purpose events: 0
[ 0.056663] ... event mask: 0000000000000003
[ 0.073727] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.080001] Brought up 1 CPUs
[ 0.080006] Total of 1 processors activated (2986.08 BogoMIPS).
[ 0.082106] devtmpfs: initialized
[ 0.082412] PM: Registering ACPI NVS region at 1bffffc0 (64 bytes)
[ 0.084185] print_constraints: dummy:
[ 0.084300] NET: Registered protocol family 16
[ 0.084507] ACPI: bus type pci registered
[ 0.084718] PCI: PCI BIOS revision 2.10 entry at 0xe9b04, last bus=1
[ 0.084721] PCI: Using configuration type 1 for base access
[ 0.085641] bio: create slab <bio-0> at 0
[ 0.085767] ACPI: Added _OSI(Module Device)
[ 0.085771] ACPI: Added _OSI(Processor Device)
[ 0.085774] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.085778] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.086818] ACPI: EC: Look up EC in DSDT
[ 0.087939] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.090784] ACPI: Interpreter enabled
[ 0.090805] ACPI: (supports S0 S3 S4 S5)
[ 0.090835] ACPI: Using IOAPIC for interrupt routing
[ 0.101067] ACPI: EC: GPE = 0x1, I/O: command/status = 0x66, data = 0x62
[ 0.101215] ACPI: No dock devices found.
[ 0.101218] HEST: Table not found.
[ 0.101226] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.101348] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.101595] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
[ 0.101600] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
[ 0.101605] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[ 0.101609] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000cffff] (ignored)
[ 0.101613] pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff] (ignored)
[ 0.101617] pci_root PNP0A03:00: host bridge window [mem 0xfff80000-0xffffffff] (ignored)
[ 0.101622] pci_root PNP0A03:00: host bridge window [mem 0x1c000000-0xfedfffff] (ignored)
[ 0.101646] pci 0000:00:00.0: [1106:0259] type 0 class 0x000600
[ 0.101662] pci 0000:00:00.0: reg 10: [mem 0xa0000000-0xa1ffffff pref]
[ 0.101741] pci 0000:00:00.1: [1106:1259] type 0 class 0x000600
[ 0.101794] pci 0000:00:00.2: [1106:2259] type 0 class 0x000600
[ 0.101848] pci 0000:00:00.3: [1106:3259] type 0 class 0x000600
[ 0.101901] pci 0000:00:00.4: [1106:4259] type 0 class 0x000600
[ 0.101957] pci 0000:00:00.7: [1106:7259] type 0 class 0x000600
[ 0.102014] pci 0000:00:01.0: [1106:b198] type 1 class 0x000604
[ 0.102068] pci 0000:00:01.0: supports D1
[ 0.102094] pci 0000:00:06.0: [1814:0301] type 0 class 0x000280
[ 0.102116] pci 0000:00:06.0: reg 10: [mem 0xffff8000-0xffffffff]
[ 0.102226] pci 0000:00:10.0: [1106:3038] type 0 class 0x000c03
[ 0.102283] pci 0000:00:10.0: reg 20: [io 0x1200-0x121f]
[ 0.102324] pci 0000:00:10.0: supports D1 D2
[ 0.102328] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.102335] pci 0000:00:10.0: PME# disabled
[ 0.102356] pci 0000:00:10.1: [1106:3038] type 0 class 0x000c03
[ 0.102414] pci 0000:00:10.1: reg 20: [io 0x1220-0x123f]
[ 0.102454] pci 0000:00:10.1: supports D1 D2
[ 0.102458] pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.102464] pci 0000:00:10.1: PME# disabled
[ 0.102485] pci 0000:00:10.2: [1106:3038] type 0 class 0x000c03
[ 0.102543] pci 0000:00:10.2: reg 20: [io 0x1240-0x125f]
[ 0.102583] pci 0000:00:10.2: supports D1 D2
[ 0.102587] pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.102593] pci 0000:00:10.2: PME# disabled
[ 0.102614] pci 0000:00:10.3: [1106:3104] type 0 class 0x000c03
[ 0.102635] pci 0000:00:10.3: reg 10: [mem 0x00000000-0x000000ff]
[ 0.102713] pci 0000:00:10.3: supports D1 D2
[ 0.102716] pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.102722] pci 0000:00:10.3: PME# disabled
[ 0.102749] pci 0000:00:11.0: [1106:3177] type 0 class 0x000601
[ 0.102829] HPET not enabled in BIOS. You might try hpet=force boot option
[ 0.102838] pci 0000:00:11.0: quirk: [io 0x1000-0x107f] claimed by vt8235 PM
[ 0.102845] pci 0000:00:11.0: quirk: [io 0x1400-0x140f] claimed by vt8235 SMB
[ 0.102887] pci 0000:00:11.1: [1106:0571] type 0 class 0x000101
[ 0.102947] pci 0000:00:11.1: reg 20: [io 0x1100-0x110f]
[ 0.103014] pci 0000:00:11.5: [1106:3059] type 0 class 0x000401
[ 0.103036] pci 0000:00:11.5: reg 10: [io 0xe000-0xe0ff]
[ 0.103116] pci 0000:00:11.5: supports D1 D2
[ 0.103138] pci 0000:00:11.6: [1106:3068] type 0 class 0x000780
[ 0.103160] pci 0000:00:11.6: reg 10: [io 0xe100-0xe1ff]
[ 0.103261] pci 0000:00:12.0: [1106:3065] type 0 class 0x000200
[ 0.103282] pci 0000:00:12.0: reg 10: [io 0xe200-0xe2ff]
[ 0.103295] pci 0000:00:12.0: reg 14: [mem 0xd0000000-0xd00000ff]
[ 0.103377] pci 0000:00:12.0: supports D1 D2
[ 0.103381] pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.103387] pci 0000:00:12.0: PME# disabled
[ 0.103456] pci 0000:01:00.0: [1106:3118] type 0 class 0x000300
[ 0.103476] pci 0000:01:00.0: reg 10: [mem 0x90000000-0x93ffffff pref]
[ 0.103487] pci 0000:01:00.0: reg 14: [mem 0xc0000000-0xc0ffffff]
[ 0.103527] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0000ffff pref]
[ 0.103549] pci 0000:01:00.0: supports D1 D2
[ 0.103594] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.103600] pci 0000:00:01.0: bridge window [io 0xc000-0xdfff]
[ 0.103606] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xcfffffff]
[ 0.103613] pci 0000:00:01.0: bridge window [mem 0x90000000-0x9fffffff pref]
[ 0.103625] pci_bus 0000:00: on NUMA node 0
[ 0.103630] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.104002] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x1e)
[ 0.114520] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 *11 14 15)
[ 0.114600] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 *7 10 11 14 15)
[ 0.114675] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 7 10 11 14 15)
[ 0.114750] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 *10 11 14 15)
[ 0.114816] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
[ 0.114882] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
[ 0.114948] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
[ 0.115014] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
[ 0.115084] ACPI: PCI Interrupt Link [ALKA] (IRQs 20) *0, disabled.
[ 0.115164] ACPI: PCI Interrupt Link [ALKB] (IRQs 23) *11
[ 0.115289] ACPI: PCI Interrupt Link [ALKC] (IRQs 22) *5, disabled.
[ 0.115331] ACPI Exception: AE_AML_INVALID_RESOURCE_TYPE, Evaluating _CRS (20110623/pci_link-282)
[ 0.115338] ACPI: PCI Interrupt Link [ALKD] (IRQs 21) *0
[ 0.115479] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.115483] vgaarb: loaded
[ 0.115485] vgaarb: bridge control possible 0000:01:00.0
[ 0.115641] PCI: Using ACPI for IRQ routing
[ 0.115647] PCI: pci_cache_line_size set to 64 bytes
[ 0.115726] reserve RAM buffer: 000000000009fc00 - 000000000009ffff
[ 0.115730] reserve RAM buffer: 000000001bfef000 - 000000001bffffff
[ 0.115927] NetLabel: Initializing
[ 0.115930] NetLabel: domain hash size = 128
[ 0.115932] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.115956] NetLabel: unlabeled traffic allowed by default
[ 0.127849] pnp: PnP ACPI init
[ 0.127893] ACPI: bus type pnp registered
[ 0.130219] pnp 00:00: [bus 00-ff]
[ 0.130225] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.130229] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.130233] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.130237] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.130241] pnp 00:00: [mem 0x000c0000-0x000cffff window]
[ 0.130245] pnp 00:00: [mem 0x000d0000-0x000dffff window]
[ 0.130248] pnp 00:00: [mem 0xfff80000-0xffffffff]
[ 0.130252] pnp 00:00: [mem 0x1c000000-0xfedfffff window]
[ 0.130367] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.130578] pnp 00:01: [irq 12]
[ 0.130630] pnp 00:01: Plug and Play ACPI device, IDs SYN0c02 SYN0c00 PNP0f13 (active)
[ 0.130660] pnp 00:02: [irq 1]
[ 0.130663] pnp 00:02: [io 0x0060]
[ 0.130666] pnp 00:02: [io 0x0064]
[ 0.130733] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.130749] pnp 00:03: [io 0x0070-0x0075]
[ 0.130757] pnp 00:03: [irq 8]
[ 0.130803] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.130818] pnp 00:04: [io 0x0061]
[ 0.130863] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.130901] pnp 00:05: [mem 0x000e0000-0x000fffff]
[ 0.130911] pnp 00:05: [mem 0xfff80000-0xffffffff]
[ 0.130915] pnp 00:05: [mem 0xfec00000-0xfec00fff]
[ 0.130918] pnp 00:05: [mem 0xfee00000-0xfee00fff]
[ 0.131018] system 00:05: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.131023] system 00:05: [mem 0xfff80000-0xffffffff] could not be reserved
[ 0.131028] system 00:05: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.131032] system 00:05: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.131037] system 00:05: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.131060] pnp 00:06: [dma 4]
[ 0.131063] pnp 00:06: [io 0x0000-0x001f]
[ 0.131066] pnp 00:06: [io 0x0081-0x008f]
[ 0.131069] pnp 00:06: [io 0x0090-0x0091]
[ 0.131073] pnp 00:06: [io 0x0093-0x009f]
[ 0.131076] pnp 00:06: [io 0x00c0-0x00df]
[ 0.131130] pnp 00:06: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.131146] pnp 00:07: [io 0x0080]
[ 0.131149] pnp 00:07: [io 0x0092]
[ 0.131152] pnp 00:07: [io 0x0330-0x0331]
[ 0.131156] pnp 00:07: [io 0x04d0-0x04d1]
[ 0.131159] pnp 00:07: [io 0x1000-0x107f]
[ 0.131162] pnp 00:07: [io 0x1400-0x140f]
[ 0.131165] pnp 00:07: [io 0x0022]
[ 0.131169] pnp 00:07: [io 0x002e-0x002f]
[ 0.131172] pnp 00:07: [io 0x0074-0x0075]
[ 0.131175] pnp 00:07: [io 0x00a8-0x00a9]
[ 0.131247] system 00:07: [io 0x0330-0x0331] has been reserved
[ 0.131252] system 00:07: [io 0x04d0-0x04d1] has been reserved
[ 0.131256] system 00:07: [io 0x1000-0x107f] has been reserved
[ 0.131260] system 00:07: [io 0x1400-0x140f] has been reserved
[ 0.131265] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.131280] pnp 00:08: [io 0x00f0-0x00ff]
[ 0.131289] pnp 00:08: [irq 13]
[ 0.131336] pnp 00:08: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.131557] pnp: PnP ACPI: found 9 devices
[ 0.131560] ACPI: ACPI bus type pnp unregistered
[ 0.170123] Switching to clocksource acpi_pm
[ 0.170160] PCI: max bus depth: 1 pci_try_num: 2
[ 0.170188] pci 0000:00:10.3: BAR 0: assigned [mem 0x1c000000-0x1c0000ff]
[ 0.170198] pci 0000:00:10.3: BAR 0: set to [mem 0x1c000000-0x1c0000ff] (PCI address [0x1c000000-0x1c0000ff])
[ 0.170205] pci 0000:01:00.0: BAR 6: assigned [mem 0x94000000-0x9400ffff pref]
[ 0.170210] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.170216] pci 0000:00:01.0: bridge window [io 0xc000-0xdfff]
[ 0.170223] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xcfffffff]
[ 0.170229] pci 0000:00:01.0: bridge window [mem 0x90000000-0x9fffffff pref]
[ 0.170252] pci 0000:00:01.0: setting latency timer to 64
[ 0.170258] pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
[ 0.170262] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff]
[ 0.170267] pci_bus 0000:01: resource 0 [io 0xc000-0xdfff]
[ 0.170270] pci_bus 0000:01: resource 1 [mem 0xc0000000-0xcfffffff]
[ 0.170274] pci_bus 0000:01: resource 2 [mem 0x90000000-0x9fffffff pref]
[ 0.170368] NET: Registered protocol family 2
[ 0.170513] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.170806] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.170983] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.171167] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.171172] TCP reno registered
[ 0.171177] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.171194] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.171354] NET: Registered protocol family 1
[ 0.171393] pci 0000:00:01.0: disabling DAC on VIA PCI bridge
[ 0.171468] pci 0000:01:00.0: Boot video device
[ 0.171473] PCI: CLS 16 bytes, default 64
[ 0.171564] Unpacking initramfs...
[ 0.173224] Switched to NOHz mode on CPU #0
[ 0.232825] Freeing initrd memory: 2212k freed
[ 0.236323] apm: BIOS not found.
[ 0.236816] audit: initializing netlink socket (disabled)
[ 0.236843] type=2000 audit(1322584071.236:1): initialized
[ 0.240632] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.243626] VFS: Disk quotas dquot_6.5.2
[ 0.243775] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.243976] msgmni has been set to 870
[ 0.244279] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.244347] io scheduler noop registered
[ 0.244350] io scheduler deadline registered
[ 0.244369] io scheduler cfq registered (default)
[ 0.244827] ERST: Table is not found!
[ 0.244830] GHES: HEST is not enabled!
[ 0.244851] isapnp: Scanning for PnP cards...
[ 0.601778] isapnp: No Plug & Play device found
[ 0.601916] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.627136] i8042: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.638458] i8042: Detected active multiplexing controller, rev 1.1
[ 0.643467] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.643520] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 0.643558] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 0.643597] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 0.643639] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 0.643777] mousedev: PS/2 mouse device common for all mice
[ 0.644086] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 0.644143] rtc0: alarms up to one year, y3k, 242 bytes nvram
[ 0.644175] cpuidle: using governor ladder
[ 0.644178] cpuidle: using governor menu
[ 0.644524] TCP cubic registered
[ 0.644529] NET: Registered protocol family 17
[ 0.644545] Registering the dns_resolver key type
[ 0.644585] Using IPI No-Shortcut mode
[ 0.644738] PM: Hibernation image not present or could not be loaded.
[ 0.644748] registered taskstats version 1
[ 0.645105] rtc_cmos 00:03: setting system clock to 2011-11-29 16:27:52 UTC (1322584072)
[ 0.645173] Initializing network drop monitor service
[ 0.645286] Freeing unused kernel memory: 508k freed
[ 0.645693] Write protecting the kernel text: 3472k
[ 0.645725] Write protecting the kernel read-only data: 1076k
[ 0.652108] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.663672] udevd[32]: starting version 175
[ 0.849744] usbcore: registered new interface driver usbfs
[ 0.849792] usbcore: registered new interface driver hub
[ 0.873449] usbcore: registered new device driver usb
[ 0.874947] SCSI subsystem initialized
[ 0.878342] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.890151] ehci_hcd 0000:00:10.3: BAR 0: set to [mem 0x1c000000-0x1c0000ff] (PCI address [0x1c000000-0x1c0000ff])
[ 0.890167] ehci_hcd 0000:00:10.3: enabling device (0000 -> 0002)
[ 0.890265] ACPI Exception: AE_AML_INVALID_RESOURCE_TYPE, Evaluating _CRS (20110623/pci_link-282)
[ 0.890273] ACPI: Unable to set IRQ for PCI Interrupt Link [ALKD]. Try pci=noacpi or acpi=off
[ 0.890335] ehci_hcd 0000:00:10.3: PCI INT D: no GSI - using ISA IRQ 10
[ 0.890394] ehci_hcd 0000:00:10.3: EHCI Host Controller
[ 0.890462] ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 1
[ 0.890552] ehci_hcd 0000:00:10.3: irq 10, io mem 0x1c000000
[ 0.900075] ehci_hcd 0000:00:10.3: USB 2.0 started, EHCI 1.00
[ 0.900389] hub 1-0:1.0: USB hub found
[ 0.900399] hub 1-0:1.0: 6 ports detected
[ 0.922796] libata version 3.00 loaded.
[ 0.923627] pata_via 0000:00:11.1: version 0.3.4
[ 0.923725] ACPI: PCI Interrupt Link [ALKA] disabled and referenced, BIOS bug
[ 0.923781] ACPI: PCI Interrupt Link [ALKA] BIOS reported IRQ 0, using IRQ 20
[ 0.923785] ACPI: PCI Interrupt Link [ALKA] enabled at IRQ 20
[ 0.923807] pata_via 0000:00:11.1: PCI INT A -> Link[ALKA] -> GSI 20 (level, low) -> IRQ 20
[ 0.925450] scsi0 : pata_via
[ 0.925728] scsi1 : pata_via
[ 0.929822] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x1100 irq 14
[ 0.929827] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x1108 irq 15
[ 0.989462] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.000089] uhci_hcd 0000:00:10.0: BAR 4: set to [io 0x1200-0x121f] (PCI address [0x1200-0x121f])
[ 1.000193] ACPI Exception: AE_AML_INVALID_RESOURCE_TYPE, Evaluating _CRS (20110623/pci_link-282)
[ 1.000201] ACPI: Unable to set IRQ for PCI Interrupt Link [ALKD]. Try pci=noacpi or acpi=off
[ 1.000262] uhci_hcd 0000:00:10.0: PCI INT A: no GSI - using ISA IRQ 11
[ 1.000305] uhci_hcd 0000:00:10.0: UHCI Host Controller
[ 1.000337] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
[ 1.000406] uhci_hcd 0000:00:10.0: irq 11, io base 0x00001200
[ 1.000895] hub 2-0:1.0: USB hub found
[ 1.000903] hub 2-0:1.0: 2 ports detected
[ 1.013356] uhci_hcd 0000:00:10.1: BAR 4: set to [io 0x1220-0x123f] (PCI address [0x1220-0x123f])
[ 1.013407] ACPI Exception: AE_AML_INVALID_RESOURCE_TYPE, Evaluating _CRS (20110623/pci_link-282)
[ 1.013414] ACPI: Unable to set IRQ for PCI Interrupt Link [ALKD]. Try pci=noacpi or acpi=off
[ 1.013469] uhci_hcd 0000:00:10.1: PCI INT B: no GSI - using ISA IRQ 7
[ 1.013497] uhci_hcd 0000:00:10.1: UHCI Host Controller
[ 1.013511] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
[ 1.013564] uhci_hcd 0000:00:10.1: irq 7, io base 0x00001220
[ 1.013902] hub 3-0:1.0: USB hub found
[ 1.013908] hub 3-0:1.0: 2 ports detected
[ 1.026688] uhci_hcd 0000:00:10.2: BAR 4: set to [io 0x1240-0x125f] (PCI address [0x1240-0x125f])
[ 1.026734] ACPI Exception: AE_AML_INVALID_RESOURCE_TYPE, Evaluating _CRS (20110623/pci_link-282)
[ 1.026741] ACPI: Unable to set IRQ for PCI Interrupt Link [ALKD]. Try pci=noacpi or acpi=off
[ 1.026796] uhci_hcd 0000:00:10.2: PCI INT C: no GSI - using ISA IRQ 5
[ 1.026820] uhci_hcd 0000:00:10.2: UHCI Host Controller
[ 1.026834] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
[ 1.026885] uhci_hcd 0000:00:10.2: irq 5, io base 0x00001240
[ 1.027208] hub 4-0:1.0: USB hub found
[ 1.027215] hub 4-0:1.0: 2 ports detected
[ 1.090584] ata1.00: ATA-6: ST960821A, 3.08, max UDMA/100
[ 1.090590] ata1.00: 117210240 sectors, multi 16: LBA48
[ 1.103760] ata1.00: configured for UDMA/100
[ 1.104018] scsi 0:0:0:0: Direct-Access ATA ST960821A 3.08 PQ: 0 ANSI: 5
[ 1.206685] usb 1-3: new high speed USB device number 2 using ehci_hcd
[ 1.243350] Refined TSC clocksource calibration: 1492.670 MHz.
[ 1.243359] Switching to clocksource tsc
[ 1.263760] ata2.00: ATAPI: _NEC DVD_RW ND-6750A, 2.61, max UDMA/33
[ 1.276961] ata2.00: configured for UDMA/33
[ 1.278470] scsi 1:0:0:0: CD-ROM _NEC DVD_RW ND-6750A 2.61 PQ: 0 ANSI: 5
[ 1.294142] sd 0:0:0:0: [sda] 117210240 512-byte logical blocks: (60.0 GB/55.8 GiB)
[ 1.294217] sd 0:0:0:0: [sda] Write Protect is off
[ 1.294222] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.294252] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.297055] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[ 1.297060] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.297678] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.339047] sda: sda1 sda2 sda3 sda4
[ 1.339048] sda4: <bsd:bad subpartition - ignored
[ 1.339050] bad subpartition - ignored
[ 1.339051] bad subpartition - ignored
[ 1.339053] bad subpartition - ignored
[ 1.339054] >
[ 1.339596] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.965097] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[ 3.325169] udevd[204]: starting version 175
[ 3.766267] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
[ 3.769493] ACPI: Lid Switch [LID]
[ 3.769609] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
[ 3.769621] ACPI: Sleep Button [SBTN]
[ 3.769717] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 3.769723] ACPI: Power Button [PWRF]
[ 3.828792] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 3.848722] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:01/LNXVIDEO:00/input/input5
[ 3.848738] ACPI: Video Device [VGA0] (multi-head: yes rom: no post: no)
[ 3.864858] thermal LNXTHERM:00: registered as thermal_zone0
[ 3.864864] ACPI: Thermal Zone [TZ0] (0 C)
[ 3.898358] ACPI: Battery Slot [BAT0] (battery present)
[ 3.906200] ACPI: AC Adapter [AC] (on-line)
[ 3.945376] Linux agpgart interface v0.103
[ 3.946856] agpgart: Detected VIA PM800/PN800/PM880/PN880 chipset
[ 3.952148] agpgart-via 0000:00:00.0: AGP aperture is 32M @ 0xa0000000
[ 4.043826] ACPI: acpi_idle registered with cpuidle
[ 4.044180] Marking TSC unstable due to TSC halts in idle
[ 4.046538] Switching to clocksource acpi_pm
[ 4.074970] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 4.158875] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 4.198754] via_rhine: v1.10-LK1.5.0 2010-10-09 Written by Donald Becker
[ 4.198997] ACPI: PCI Interrupt Link [ALKB] BIOS reported IRQ 11, using IRQ 23
[ 4.199001] ACPI: PCI Interrupt Link [ALKB] enabled at IRQ 23
[ 4.199024] via-rhine 0000:00:12.0: PCI INT A -> Link[ALKB] -> GSI 23 (level, low) -> IRQ 23
[ 4.203551] via-rhine 0000:00:12.0: eth0: VIA Rhine II at 0x1e200, 00:40:d0:99:d7:0e, IRQ 23
[ 4.204273] via-rhine 0000:00:12.0: eth0: MII PHY found at address 1, status 0x7849 advertising 05e1 Link 0000
[ 4.303383] ACPI: PCI Interrupt Link [ALKC] disabled and referenced, BIOS bug
[ 4.303532] ACPI: PCI Interrupt Link [ALKC] BIOS reported IRQ 5, using IRQ 22
[ 4.303536] ACPI: PCI Interrupt Link [ALKC] enabled at IRQ 22
[ 4.303560] snd_via82xx_modem 0000:00:11.6: PCI INT C -> Link[ALKC] -> GSI 22 (level, low) -> IRQ 22
[ 4.306697] snd_via82xx_modem 0000:00:11.6: setting latency timer to 64
[ 4.354689] NET: Registered protocol family 23
[ 4.356414] cfg80211: Calling CRDA to update world regulatory domain
[ 4.624524] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x1a0b3, caps: 0xa04713/0x200000/0x0
[ 4.676261] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio3/input/input6
[ 4.814482] snd_via82xx 0000:00:11.5: power state changed by ACPI to D0
[ 4.814491] snd_via82xx 0000:00:11.5: power state changed by ACPI to D0
[ 4.814512] snd_via82xx 0000:00:11.5: PCI INT C -> Link[ALKC] -> GSI 22 (level, low) -> IRQ 22
[ 4.814673] snd_via82xx 0000:00:11.5: setting latency timer to 64
[ 5.331188] rt61pci 0000:00:06.0: enabling device (0000 -> 0002)
[ 5.331219] rt61pci 0000:00:06.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 5.331238] rt61pci 0000:00:06.0: setting latency timer to 64
[ 5.412825] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 5.413403] Registered led device: rt61pci-phy0::radio
[ 5.413434] Registered led device: rt61pci-phy0::assoc
[ 6.206711] ehci_hcd 0000:00:10.3: Unlink after no-IRQ? Controller is probably using the wrong IRQ.
[ 16.750028] usb 1-3: device not accepting address 2, error -110
[ 16.856696] usb 1-3: new high speed USB device number 3 using ehci_hcd
[ 32.400026] usb 1-3: device not accepting address 3, error -110
[ 32.506694] usb 1-3: new high speed USB device number 4 using ehci_hcd
[ 37.286332] EXT4-fs (sda3): re-mounted. Opts: (null)
[ 37.575713] Adding 265068k swap on /dev/sda2. Priority:-1 extents:1 across:265068k
[ 42.933365] usb 1-3: device not accepting address 4, error -110
[ 43.040029] usb 1-3: new high speed USB device number 5 using ehci_hcd
[ 45.219997] Uhhuh. NMI received for unknown reason 3d on CPU 0.
[ 45.219997] Do you have a strange power saving mode enabled?
[ 45.219997] Dazed and confused, but trying to continue
[ 48.704592] wlan0: authenticate with 00:0b:2b:3f:ea:ba (try 1)
[ 48.710584] wlan0: authenticated
[ 48.710733] wlan0: associate with 00:0b:2b:3f:ea:ba (try 1)
[ 48.718141] wlan0: RX AssocResp from 00:0b:2b:3f:ea:ba (capab=0x411 status=0 aid=2)
[ 48.718147] wlan0: associated
[ 53.466699] usb 1-3: device not accepting address 5, error -110
[ 53.466792] hub 1-0:1.0: unable to enumerate USB device on port 3
[ 61.861297] [drm] Initialized drm 1.1.0 20060810
[ 62.376706] pci 0000:01:00.0: power state changed by ACPI to D0
[ 62.376715] pci 0000:01:00.0: power state changed by ACPI to D0
[ 62.376745] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 62.377815] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 62.377822] [drm] No driver support for vblank timestamp query.
[ 62.377828] [drm] Initialized via 2.11.1 20070202 for 0000:01:00.0 on minor 0
[ 62.401367] agpgart-via 0000:00:00.0: AGP 3.5 bridge
[ 62.401398] agpgart-via 0000:00:00.0: bridge is in legacy mode, falling back to 2.x
[ 62.401407] agpgart-via 0000:00:00.0: putting AGP V2 device into 0x mode
[ 62.401494] pci 0000:01:00.0: putting AGP V2 device into 0x mode
[ 79.709757] NET: Registered protocol family 10
[ 89.750028] wlan0: no IPv6 routers presentThis is the specifically listing acpi errors:
[ 0.000000] BIOS-e820: 000000001bff0000 - 000000001bffffc0 (ACPI data)
[ 0.000000] BIOS-e820: 000000001bffffc0 - 000000001c000000 (ACPI NVS)
[ 0.000000] ACPI: RSDP 000e6010 00014 (v00 OID_00)
[ 0.000000] ACPI: RSDT 1bffc2d0 0002C (v01 INSYDE FACP_000 00000100 0000 00010200)
[ 0.000000] ACPI: FACP 1bfffb00 00074 (v01 INSYDE FACP_000 00000100 0000 00010200)
[ 0.000000] ACPI: DSDT 1bffc310 037E2 (v01 INSYDE PN800 00001000 INTL 02002036)
[ 0.000000] ACPI: FACS 1bffffc0 00040
[ 0.000000] ACPI: APIC 1bfffb90 00068 (v01 INSYDE APIC_000 30303030 0000 00010200)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.014766] ACPI: Core revision 20110623
[ 0.085736] PM: Registering ACPI NVS region at 1bffffc0 (64 bytes)
[ 0.087828] ACPI: bus type pci registered
[ 0.089094] ACPI: Added _OSI(Module Device)
[ 0.089098] ACPI: Added _OSI(Processor Device)
[ 0.089101] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.089105] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.090141] ACPI: EC: Look up EC in DSDT
[ 0.091266] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.094108] ACPI: Interpreter enabled
[ 0.094129] ACPI: (supports S0 S3 S4 S5)
[ 0.094159] ACPI: Using IOAPIC for interrupt routing
[ 0.104400] ACPI: EC: GPE = 0x1, I/O: command/status = 0x66, data = 0x62
[ 0.104547] ACPI: No dock devices found.
[ 0.104559] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.104682] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.106967] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.117868] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 *11 14 15)
[ 0.117948] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 *7 10 11 14 15)
[ 0.118024] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 7 10 11 14 15)
[ 0.118099] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 *10 11 14 15)
[ 0.118164] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
[ 0.118230] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
[ 0.118296] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
[ 0.118362] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
[ 0.118432] ACPI: PCI Interrupt Link [ALKA] (IRQs 20) *0, disabled.
[ 0.118512] ACPI: PCI Interrupt Link [ALKB] (IRQs 23) *11
[ 0.118637] ACPI: PCI Interrupt Link [ALKC] (IRQs 22) *5, disabled.
[ 0.118679] ACPI Exception: AE_AML_INVALID_RESOURCE_TYPE, Evaluating _CRS (20110623/pci_link-282)
[ 0.118686] ACPI: PCI Interrupt Link [ALKD] (IRQs 21) *0
[ 0.118989] PCI: Using ACPI for IRQ routing
[ 0.141912] pnp: PnP ACPI init
[ 0.141957] ACPI: bus type pnp registered
[ 0.145081] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.145342] pnp 00:01: Plug and Play ACPI device, IDs SYN0c02 SYN0c00 PNP0f13 (active)
[ 0.145446] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.145522] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.145582] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.145751] system 00:05: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.145845] pnp 00:06: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.145979] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.146050] pnp 00:08: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.146273] pnp: PnP ACPI: found 9 devices
[ 0.146276] ACPI: ACPI bus type pnp unregistered
[ 1.046872] ACPI Exception: AE_AML_INVALID_RESOURCE_TYPE, Evaluating _CRS (20110623/pci_link-282)
[ 1.046880] ACPI: Unable to set IRQ for PCI Interrupt Link [ALKD]. Try pci=noacpi or acpi=off
[ 1.067070] ACPI: PCI Interrupt Link [ALKA] disabled and referenced, BIOS bug
[ 1.067125] ACPI: PCI Interrupt Link [ALKA] BIOS reported IRQ 0, using IRQ 20
[ 1.067129] ACPI: PCI Interrupt Link [ALKA] enabled at IRQ 20
[ 1.150143] ACPI Exception: AE_AML_INVALID_RESOURCE_TYPE, Evaluating _CRS (20110623/pci_link-282)
[ 1.150151] ACPI: Unable to set IRQ for PCI Interrupt Link [ALKD]. Try pci=noacpi or acpi=off
[ 1.163413] ACPI Exception: AE_AML_INVALID_RESOURCE_TYPE, Evaluating _CRS (20110623/pci_link-282)
[ 1.163420] ACPI: Unable to set IRQ for PCI Interrupt Link [ALKD]. Try pci=noacpi or acpi=off
[ 1.176739] ACPI Exception: AE_AML_INVALID_RESOURCE_TYPE, Evaluating _CRS (20110623/pci_link-282)
[ 1.176746] ACPI: Unable to set IRQ for PCI Interrupt Link [ALKD]. Try pci=noacpi or acpi=off
[ 4.085120] ACPI: PCI Interrupt Link [ALKB] BIOS reported IRQ 11, using IRQ 23
[ 4.085125] ACPI: PCI Interrupt Link [ALKB] enabled at IRQ 23
[ 4.221374] ACPI: Video Device [VGA0] (multi-head: yes rom: no post: no)
[ 4.239683] ACPI: Thermal Zone [TZ0] (0 C)
[ 4.254801] ACPI: Battery Slot [BAT0] (battery present)
[ 4.263201] ACPI: Lid Switch [LID]
[ 4.263515] ACPI: Sleep Button [SBTN]
[ 4.264466] ACPI: Power Button [PWRF]
[ 4.270269] ACPI: AC Adapter [AC] (on-line)
[ 4.430420] ACPI: acpi_idle registered with cpuidle
[ 4.732947] ACPI: PCI Interrupt Link [ALKC] disabled and referenced, BIOS bug
[ 4.733098] ACPI: PCI Interrupt Link [ALKC] BIOS reported IRQ 5, using IRQ 22
[ 4.733102] ACPI: PCI Interrupt Link [ALKC] enabled at IRQ 22
[ 5.244600] snd_via82xx 0000:00:11.5: power state changed by ACPI to D0
[ 5.244609] snd_via82xx 0000:00:11.5: power state changed by ACPI to D0
[ 57.083376] pci 0000:01:00.0: power state changed by ACPI to D0
[ 57.083386] pci 0000:01:00.0: power state changed by ACPI to D0And this is the specs for the pc (if of any use):
# dmidecode 2.11
SMBIOS 2.3 present.
40 structures occupying 1485 bytes.
Table at 0x000EB160.
Handle 0x0000, DMI type 0, 20 bytes
BIOS Information
Vendor: Insyde Software Corporation
Version: R1.04
Release Date: /14/0620..
Address: 0xEB000
Runtime Size: 84 kB
ROM Size: 512 kB
Characteristics:
ISA is supported
PCI is supported
PC Card (PCMCIA) is supported
PNP is supported
APM is supported
BIOS is upgradeable
BIOS shadowing is allowed
Boot from CD is supported
Selectable boot is supported
EDD is supported
3.5"/720 kB floppy services are supported (int 13h)
Print screen service is supported (int 5h)
8042 keyboard services are supported (int 9h)
Printer services are supported (int 17h)
CGA/mono video services are supported (int 10h)
ACPI is supported
USB legacy is supported
AGP is supported
ATAPI Zip drive boot is supported
Smart battery is supported
Function key-initiated network boot is supported
Handle 0x0001, DMI type 1, 25 bytes
System Information
Manufacturer: Packard Bell Computers International
Product Name: Packard Bell EasyNote
Version: PB42B02326
Serial Number: 735201890234
UUID: 005270F7-933E-DB11-8000-4E45435F4349
Wake-up Type: Power Switch
Handle 0x0002, DMI type 2, 17 bytes
Base Board Information
Manufacturer: NEC COMPUTERS INTERNATIONAL
Product Name: NEC Versa Premium
Version: 5a
Serial Number: 12345678
Asset Tag: 87654321
Features: None
Location In Chassis: Not Specified
Chassis Handle: 0x0000
Type: <OUT OF SPEC>
Contained Object Handles: 0
Handle 0x0003, DMI type 3, 22 bytes
Chassis Information
Manufacturer:
Type: Pizza Box
Lock: Not Present
Version: ...I....................
Serial Number: 50424E
Asset Tag: 12345678
Boot-up State: Safe
Power Supply State: Safe
Thermal State: Safe
Security Status: None
OEM Information: 0x00000000
Height: Unspecified
Number Of Power Cords: Unspecified
Contained Elements: 0
SKU Number: Not Specified
Handle 0x0004, DMI type 4, 35 bytes
Processor Information
Socket Designation: mPGA478
Type: Central Processor
Family: Pentium 4
Manufacturer: 123456789ABC
ID: 00 00 00 00 00 00 00 00
Signature: Type 0, Family 0, Model 0, Stepping 0
Flags: None
Version:
Voltage: 3.3 V
External Clock: 100 MHz
Max Speed: 1500 MHz
Current Speed: 1500 MHz
Status: Populated, Enabled
Upgrade: None
L1 Cache Handle: 0x0005
L2 Cache Handle: 0x0006
L3 Cache Handle: Not Provided
Serial Number: Processor Serial Number
Asset Tag: Asset_TAG
Part Number: Part Number
Handle 0x0005, DMI type 7, 19 bytes
Cache Information
Socket Designation: L1 Cache
Configuration: Enabled, Not Socketed, Level 1
Operational Mode: Write Back
Location: Internal
Installed Size: 64 kB
Maximum Size: 64 kB
Supported SRAM Types:
Burst
Pipeline Burst
Installed SRAM Type: Burst Pipeline Burst
Speed: Unknown
Error Correction Type: None
System Type: Unknown
Associativity: Unknown
Handle 0x0006, DMI type 7, 19 bytes
Cache Information
Socket Designation: L2 Cache
Configuration: Enabled, Not Socketed, Level 2
Operational Mode: Write Back
Location: External
Installed Size: 1024 kB
Maximum Size: 1024 kB
Supported SRAM Types:
Burst
Pipeline Burst
Installed SRAM Type: Burst Pipeline Burst
Speed: Unknown
Error Correction Type: None
System Type: Unknown
Associativity: Unknown
Handle 0x0007, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: VGA Conn.
Internal Connector Type: None
External Reference Designator: J701
External Connector Type: Other
Port Type: Other
Handle 0x0008, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: USB Conn.#1
Internal Connector Type: None
External Reference Designator: J3
External Connector Type: Other
Port Type: USB
Handle 0x0009, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: USB Conn.#2
Internal Connector Type: None
External Reference Designator: J3
External Connector Type: Other
Port Type: USB
Handle 0x000A, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: USB Conn.#3
Internal Connector Type: None
External Reference Designator: J2
External Connector Type: Other
Port Type: USB
Handle 0x000B, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: USB Conn.#4
Internal Connector Type: None
External Reference Designator: J703
External Connector Type: Other
Port Type: USB
Handle 0x000C, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: DC Input
Internal Connector Type: None
External Reference Designator: J1
External Connector Type: Other
Port Type: Other
Handle 0x000D, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: MIC. Port
Internal Connector Type: None
External Reference Designator: J706
External Connector Type: Infrared
Port Type: Other
Handle 0x000E, DMI type 9, 13 bytes
System Slot Information
Designation: PCI Slot
Type: 32-bit PCI
Current Usage: Available
Length: Long
ID: 4
Characteristics:
5.0 V is provided
3.3 V is provided
PME signal is supported
Handle 0x000F, DMI type 9, 13 bytes
System Slot Information
Designation: AGP Slot
Type: 32-bit AGP
Current Usage: In Use
Length: Long
ID: 4
Characteristics: Unknown
Handle 0x0010, DMI type 10, 8 bytes
On Board Device 1 Information
Type: Other
Status: Enabled
Description: IDE Controller
On Board Device 2 Information
Type: Video
Status: Enabled
Description: VGA
Handle 0x0011, DMI type 11, 5 bytes
OEM Strings
String 1: Insyde Software SM-BIOS For PN800
Handle 0x0012, DMI type 12, 5 bytes
System Configuration Options
Option 1: Insyde Software SM-BIOS For PN800
Handle 0x0013, DMI type 13, 22 bytes
BIOS Language Information
Language Description Format: Abbreviated
Installable Languages: 1
en|US|iso8859-1
Currently Installed Language: en|US|iso8859-1
Handle 0x0014, DMI type 16, 15 bytes
Physical Memory Array
Location: System Board Or Motherboard
Use: System Memory
Error Correction Type: None
Maximum Capacity: 512 MB
Error Information Handle: 0x0018
Number Of Devices: 2
Handle 0x0015, DMI type 17, 27 bytes
Memory Device
Array Handle: 0x0014
Error Information Handle: Not Provided
Total Width: 64 bits
Data Width: 64 bits
Size: No Module Installed
Form Factor: DIMM
Set: None
Locator: DRAM Slot 0
Bank Locator: Banks 0/1
Type: DRAM
Type Detail: EDO
Speed: Unknown
Manufacturer: Not Specified
Serial Number: Not Specified
Asset Tag: Not Specified
Part Number: Not Specified
Handle 0x0016, DMI type 17, 27 bytes
Memory Device
Array Handle: 0x0014
Error Information Handle: Not Provided
Total Width: 64 bits
Data Width: 64 bits
Size: 512 MB
Form Factor: DIMM
Set: None
Locator: DRAM Slot 1
Bank Locator: Banks 2/3
Type: DRAM
Type Detail: EDO
Speed: 166 MHz
Manufacturer: Not Specified
Serial Number: Not Specified
Asset Tag: Not Specified
Part Number: Not Specified
Handle 0x0017, DMI type 17, 27 bytes
Memory Device
Array Handle: 0x0014
Error Information Handle: Not Provided
Total Width: 64 bits
Data Width: 64 bits
Size: No Module Installed
Form Factor: DIMM
Set: None
Locator: DRAM Slot 2
Bank Locator: Banks 4/5
Type: DRAM
Type Detail: EDO
Speed: Unknown
Manufacturer: Not Specified
Serial Number: Not Specified
Asset Tag: Not Specified
Part Number: Not Specified
Handle 0x0018, DMI type 18, 23 bytes
32-bit Memory Error Information
Type: Unknown
Granularity: Memory Partition Level
Operation: Unknown
Vendor Syndrome: Unknown
Memory Array Address: Unknown
Device Address: Unknown
Resolution: Unknown
Handle 0x0019, DMI type 19, 15 bytes
Memory Array Mapped Address
Starting Address: 0x00000000000
Ending Address: 0x0001FFFFFFF
Range Size: 512 MB
Physical Array Handle: 0x0014
Partition Width: 2
Handle 0x001A, DMI type 20, 19 bytes
Memory Device Mapped Address
Starting Address: 0x00000000000
Ending Address: 0x000000003FF
Range Size: 1 kB
Physical Device Handle: 0x0015
Memory Array Mapped Address Handle: 0x0019
Partition Row Position: 1
Interleave Position: 1
Handle 0x001B, DMI type 20, 19 bytes
Memory Device Mapped Address
Starting Address: 0x00000000000
Ending Address: 0x000000003FF
Range Size: 1 kB
Physical Device Handle: 0x0016
Memory Array Mapped Address Handle: 0x0019
Partition Row Position: 2
Interleave Position: 2
Handle 0x001C, DMI type 21, 7 bytes
Built-in Pointing Device
Type: Mouse
Interface: PS/2
Buttons: 2
Handle 0x001D, DMI type 22, 26 bytes
Portable Battery
Location: Smart Battery Conn J37
Manufacturer: Duracell
Manufacture Date: 01/06/05
Serial Number: 0042
Name: DR36
Design Capacity: Unknown
Design Voltage: 12 mV
SBDS Version: V1.0
Maximum Error: Unknown
SBDS Chemistry: Not Specified
OEM-specific Information: 0x00000000
Handle 0x001E, DMI type 23, 13 bytes
System Reset
Status: Disabled
Watchdog Timer: Not Present
Handle 0x001F, DMI type 24, 5 bytes
Hardware Security
Power-On Password Status: Disabled
Keyboard Password Status: Not Implemented
Administrator Password Status: Disabled
Front Panel Reset Status: Not Implemented
Handle 0x0020, DMI type 25, 9 bytes
System Power Controls
Next Scheduled Power-on: *-* 00:00:00
Handle 0x0021, DMI type 26, 22 bytes
Voltage Probe
Description: Voltage Probe Description
Location: Unknown
Status: Unknown
Maximum Value: Unknown
Minimum Value: Unknown
Resolution: Unknown
Tolerance: Unknown
Accuracy: Unknown
OEM-specific Information: 0x00000000
Nominal Value: 0.000 V
Handle 0x0022, DMI type 27, 14 bytes
Cooling Device
Temperature Probe Handle: 0x0023
Type: Unknown
Status: Unknown
OEM-specific Information: 0x00000000
Nominal Speed: 0 rpm
Handle 0x0023, DMI type 28, 22 bytes
Temperature Probe
Description: Temperature Probe Description
Location: Unknown
Status: Unknown
Maximum Value: Unknown
Minimum Value: Unknown
Resolution: Unknown
Tolerance: Unknown
Accuracy: Unknown
OEM-specific Information: 0x00000000
Nominal Value: 0.0 deg C
Handle 0x0024, DMI type 29, 22 bytes
Electrical Current Probe
Description: Electrical Probe Description
Location: Unknown
Status: Unknown
Maximum Value: Unknown
Minimum Value: Unknown
Resolution: Unknown
Tolerance: Unknown
Accuracy: Unknown
OEM-specific Information: 0x00000000
Nominal Value: 0.000 A
Handle 0x0025, DMI type 30, 6 bytes
Out-of-band Remote Access
Manufacturer Name: Manufacturer Name
Inbound Connection: Disabled
Outbound Connection: Disabled
Handle 0x0026, DMI type 32, 11 bytes
System Boot Information
Status: No errors detected
Handle 0x0027, DMI type 127, 4 bytes
End Of Tableacpi=off only disabled the wifi.. Looking for inspiration anybody have any ideas to solve this? I would like not to having to buy an external wifi and then somehow get Arch to work without the internal wifi-card..
Last edited by jakobp (2011-12-13 16:24:47)
Offline