You are not logged in.
after -Syu upgrade (without errors), screen is blank after starting X. Christmas is coming and I can't play Xmas music so it's turning into family panic too!!
I've tried Xorg -configure but the logs show there is some driver mismatch which I don't know how to fix.
I've been using the Intel i915 driver with no problems at all until now.
Xorg.0.log
[ 1169.872] _XSERVTransSocketOpenCOTSServer: Unable to open socket for inet6
[ 1169.873] _XSERVTransOpen: transport open failed for inet6/stefnir:0
[ 1169.873] _XSERVTransMakeAllCOTSServerListeners: failed to open listener for inet6
[ 1169.877]
X.Org X Server 1.11.3
Release Date: 2011-12-16
[ 1169.877] X Protocol Version 11, Revision 0
[ 1169.877] Build Operating System: Linux 3.1.5-1-ARCH i686
[ 1169.877] Current Operating System: Linux stefnir 3.1.5-1-ARCH #1 SMP PREEMPT Sun Dec 11 06:26:14 UTC 2011 i686
[ 1169.877] Kernel command line: root=/dev/sdb1 quiet i915.modeset=1 ro
[ 1169.877] Build Date: 17 December 2011 09:38:27AM
[ 1169.877]
[ 1169.877] Current version of pixman: 0.24.0
[ 1169.877] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 1169.878] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 1169.878] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Dec 23 15:34:56 2011
[ 1169.878] (II) Loader magic: 0x8228580
[ 1169.878] (II) Module ABI versions:
[ 1169.878] X.Org ANSI C Emulation: 0.4
[ 1169.879] X.Org Video Driver: 11.0
[ 1169.879] X.Org XInput driver : 13.0
[ 1169.879] X.Org Server Extension : 6.0
[ 1169.881] (--) PCI:*(0:0:2:0) 8086:27ae:1462:0110 rev 3, Mem @ 0xdfe80000/524288, 0xc0000000/268435456, 0xdff00000/262144, I/O @ 0x0000d0f0/8
[ 1169.881] (--) PCI: (0:0:2:1) 8086:27a6:1462:0110 rev 3, Mem @ 0xdfe00000/524288
[ 1169.883] List of video drivers:
[ 1169.883] geode
[ 1169.883] ztv
[ 1169.883] i740
[ 1169.883] siliconmotion
[ 1169.883] sisusb
[ 1169.884] xgi
[ 1169.884] xgixp
[ 1169.884] dummy
[ 1169.884] nv
[ 1169.884] tseng
[ 1169.884] s3virge
[ 1169.884] ast
[ 1169.884] voodoo
[ 1169.884] r128
[ 1169.884] intel
[ 1169.885] s3
[ 1169.885] apm
[ 1169.885] ark
[ 1169.885] chips
[ 1169.885] vmware
[ 1169.885] vmwlegacy
[ 1169.885] i128
[ 1169.885] neomagic
[ 1169.885] trident
[ 1169.885] cirrus
[ 1169.886] glint
[ 1169.886] savage
[ 1169.886] mga
[ 1169.886] rendition
[ 1169.886] sis
[ 1169.886] mach64
[ 1169.886] tdfx
[ 1169.886] v4l
[ 1169.886] fbdev
[ 1169.887] vesa
[ 1169.887] (II) LoadModule: "geode"
[ 1169.887] (II) Loading /usr/lib/xorg/modules/drivers/geode_drv.so
[ 1169.901] (II) Module geode: vendor="X.Org Foundation"
[ 1169.901] compiled for 1.10.0, module version = 2.11.12
[ 1169.901] Module class: X.Org Video Driver
[ 1169.901] ABI class: X.Org Video Driver, version 10.0
[ 1169.901] (EE) module ABI major version (10) doesn't match the server's version (11)
[ 1169.901] (II) UnloadModule: "geode"
[ 1169.901] (II) Unloading geode
[ 1169.901] (EE) Failed to load module "geode" (module requirement mismatch, 0)
[ 1169.901] (II) LoadModule: "ztv"
[ 1169.902] (II) Loading /usr/lib/xorg/modules/drivers/ztv_drv.so
[ 1169.906] (II) Module ztv: vendor="X.Org Foundation"
[ 1169.906] compiled for 1.10.0, module version = 0.0.1
[ 1169.906] ABI class: X.Org Video Driver, version 10.0
[ 1169.906] (EE) module ABI major version (10) doesn't match the server's version (11)
[ 1169.907] (II) UnloadModule: "ztv"
[ 1169.907] (II) Unloading ztv
[ 1169.907] (EE) Failed to load module "ztv" (module requirement mismatch, 0)
[ 1169.907] (II) LoadModule: "i740"
[ 1169.908] (II) Loading /usr/lib/xorg/modules/drivers/i740_drv.so
[ 1169.912] (II) Module i740: vendor="X.Org Foundation"
[ 1169.912] compiled for 1.10.99.902, module version = 1.3.2
[ 1169.912] Module class: X.Org Video Driver
[ 1169.912] ABI class: X.Org Video Driver, version 11.0
[ 1169.912] (II) LoadModule: "siliconmotion"
[ 1169.913] (II) Loading /usr/lib/xorg/modules/drivers/siliconmotion_drv.so
[ 1169.921] (II) Module siliconmotion: vendor="X.Org Foundation"
[ 1169.921] compiled for 1.10.99.902, module version = 1.7.5
[ 1169.921] Module class: X.Org Video Driver
[ 1169.921] ABI class: X.Org Video Driver, version 11.0
[ 1169.921] (II) LoadModule: "sisusb"
[ 1169.922] (II) Loading /usr/lib/xorg/modules/drivers/sisusb_drv.so
[ 1169.928] (II) Module sisusb: vendor="X.Org Foundation"
[ 1169.928] compiled for 1.10.99.902, module version = 0.9.4
[ 1169.928] Module class: X.Org Video Driver
[ 1169.928] ABI class: X.Org Video Driver, version 11.0
[ 1169.928] (II) LoadModule: "xgi"
[ 1169.929] (II) Loading /usr/lib/xorg/modules/drivers/xgi_drv.so
[ 1169.945] (EE) LoadModule: Module xgi does not have a xgiModuleData data object.
[ 1169.946] (II) UnloadModule: "xgi"
[ 1169.946] (II) Unloading xgi
[ 1169.946] (EE) Failed to load module "xgi" (invalid module, 0)
[ 1169.946] (II) LoadModule: "xgixp"
[ 1169.947] (II) Loading /usr/lib/xorg/modules/drivers/xgixp_drv.so
[ 1169.955] (II) Module xgixp: vendor="X.Org Foundation"
[ 1169.955] compiled for 1.10.99.902, module version = 1.7.2
[ 1169.955] Module class: X.Org Video Driver
[ 1169.955] ABI class: X.Org Video Driver, version 11.0
[ 1169.955] (II) Loading sub module "fb"
[ 1169.955] (II) LoadModule: "fb"
[ 1169.956] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 1169.957] (II) Module fb: vendor="X.Org Foundation"
[ 1169.957] compiled for 1.11.3, module version = 1.0.0
[ 1169.957] ABI class: X.Org ANSI C Emulation, version 0.4
[ 1169.957] (II) Loading sub module "vgahw"
[ 1169.957] (II) LoadModule: "vgahw"
[ 1169.958] (II) Loading /usr/lib/xorg/modules/libvgahw.so
[ 1169.962] (II) Module vgahw: vendor="X.Org Foundation"
[ 1169.962] compiled for 1.11.3, module version = 0.1.0
[ 1169.962] ABI class: X.Org Video Driver, version 11.0dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.1.5-1-ARCH (tobias@T-POWA-LX) (gcc version 4.6.2 20111125 (prerelease) (GCC) ) #1 SMP PREEMPT Sun Dec 11 06:26:14 UTC 2011
[ 0.000000] Atom PSE erratum detected, BIOS microcode update recommended
[ 0.000000] Disabled fast string operations
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009ec00 (usable)
[ 0.000000] BIOS-e820: 000000000009ec00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003f5b2000 (usable)
[ 0.000000] BIOS-e820: 000000003f5b2000 - 000000003f5d5000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003f5d5000 - 000000003f5e6000 (reserved)
[ 0.000000] BIOS-e820: 000000003f5e6000 - 000000003f5e9000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003f5e9000 - 000000003f605000 (reserved)
[ 0.000000] BIOS-e820: 000000003f605000 - 000000003f606000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003f606000 - 000000003f608000 (reserved)
[ 0.000000] BIOS-e820: 000000003f608000 - 000000003f611000 (ACPI data)
[ 0.000000] BIOS-e820: 000000003f611000 - 000000003f617000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003f617000 - 000000003f700000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffb00000 - 00000000ffc00000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
[ 0.000000] DMI 2.4 present.
[ 0.000000] DMI: LG Electronics X110-L.A7W2V/X110, BIOS EN021IL1.10I 11/04/2008
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] last_pfn = 0x3f5b2 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-DBFFF write-protect
[ 0.000000] DC000-E7FFF write-through
[ 0.000000] E8000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask 0C0000000 write-back
[ 0.000000] 1 base 03F700000 mask 0FFF00000 uncachable
[ 0.000000] 2 base 03F800000 mask 0FF800000 uncachable
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] initial memory mapped : 0 - 00c00000
[ 0.000000] Base memory trampoline at [c009a000] 9a000 size 16384
[ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[ 0.000000] 0000000000 - 00377fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 377fe000 @ b1f000-c00000
[ 0.000000] RAMDISK: 3f2d0000 - 3f5a2000
[ 0.000000] Allocated new RAMDISK: 3752c000 - 377fd57c
[ 0.000000] Move RAMDISK from 000000003f2d0000 - 000000003f5a157b to 3752c000 - 377fd57b
[ 0.000000] ACPI: RSDP 000f03c0 00024 (v02 LGE)
[ 0.000000] ACPI: XSDT 3f60ff10 0004C (v01 LGE LGPC 06222004 MSFT 00010013)
[ 0.000000] ACPI: FACP 3f5e6c10 000F4 (v04 LGE LGPC 06222004 MSFT 00010013)
[ 0.000000] ACPI Warning: 32/64 FACS address mismatch in FADT - two FACS tables! (20110623/tbfadt-369)
[ 0.000000] ACPI Warning: 32/64X FACS address mismatch in FADT - 0x3F611E40/0x000000003F611D40, using 32 (20110623/tbfadt-489)
[ 0.000000] ACPI: DSDT 3f608010 057B2 (v01 LGE LGPC 00000000 INTL 20051117)
[ 0.000000] ACPI: FACS 3f611e40 00040
[ 0.000000] ACPI: APIC 3f610e90 0005C (v02 LGE LGPC 06222004 MSFT 00010013)
[ 0.000000] ACPI: SSDT 3f605510 004CE (v02 PmRef CpuPm 00003000 INTL 20051117)
[ 0.000000] ACPI: SSDT 3f5e8a10 00232 (v02 PmRef Cpu0Tst 00003000 INTL 20051117)
[ 0.000000] ACPI: SSDT 3f611a10 000A0 (v02 PmRef Cpu1Tst 00003000 INTL 20051117)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 125MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000377fe
[ 0.000000] HighMem 0x000377fe -> 0x0003f5b2
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009e
[ 0.000000] 0: 0x00000100 -> 0x0003f5b2
[ 0.000000] On node 0 totalpages: 259392
[ 0.000000] free_area_init_node: node 0, pgdat c05ce580, node_mem_map f6d3b200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3950 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 221486 pages, LIFO batch:31
[ 0.000000] HighMem zone: 252 pages used for memmap
[ 0.000000] HighMem zone: 31928 pages, LIFO batch:7
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 3f700000 (gap: 3f700000:c0400000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 13 pages/cpu @f6d1b000 s29632 r0 d23616 u53248
[ 0.000000] pcpu-alloc: s29632 r0 d23616 u53248 alloc=13*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 257364
[ 0.000000] Kernel command line: root=/dev/sdb1 quiet i915.modeset=1 ro
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 4151840 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (000377fe:0003f5b2)
[ 0.000000] Memory: 1014276k/1038024k available (3472k kernel code, 23292k reserved, 1483k data, 512k init, 128720k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
[ 0.000000] .init : 0xc05d7000 - 0xc0657000 ( 512 kB)
[ 0.000000] .data : 0xc0464055 - 0xc05d6fc0 (1483 kB)
[ 0.000000] .text : 0xc0100000 - 0xc0464055 (3472 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] Verbose stalled-CPUs detection is disabled.
[ 0.000000] NR_IRQS:512
[ 0.000000] CPU 0 irqstacks, hard=f640c000 soft=f640e000
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1600.017 MHz processor.
[ 0.006670] Calibrating delay loop (skipped), value calculated using timer frequency.. 3201.36 BogoMIPS (lpj=5333390)
[ 0.006682] pid_max: default: 32768 minimum: 301
[ 0.006798] Security Framework initialized
[ 0.006808] AppArmor: AppArmor disabled by boot time parameter
[ 0.006881] Mount-cache hash table entries: 512
[ 0.007416] Initializing cgroup subsys cpuacct
[ 0.007455] Initializing cgroup subsys memory
[ 0.007481] Initializing cgroup subsys devices
[ 0.007487] Initializing cgroup subsys freezer
[ 0.007493] Initializing cgroup subsys net_cls
[ 0.007499] Initializing cgroup subsys blkio
[ 0.007575] Atom PSE erratum detected, BIOS microcode update recommended
[ 0.007581] Disabled fast string operations
[ 0.007590] CPU: Physical Processor ID: 0
[ 0.007594] CPU: Processor Core ID: 0
[ 0.007601] mce: CPU supports 5 MCE banks
[ 0.007620] CPU0: Thermal monitoring enabled (TM2)
[ 0.007628] using mwait in idle threads.
[ 0.010342] ACPI: Core revision 20110623
[ 0.020027] ftrace: allocating 15585 entries in 31 pages
[ 0.023444] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.023739] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[ 0.058402] CPU0: Intel(R) Atom(TM) CPU N270 @ 1.60GHz stepping 02
[ 0.059996] Performance Events: PEBS fmt0+, Atom events, Intel PMU driver.
[ 0.059996] ... version: 3
[ 0.059996] ... bit width: 40
[ 0.059996] ... generic registers: 2
[ 0.059996] ... value mask: 000000ffffffffff
[ 0.059996] ... max period: 000000007fffffff
[ 0.059996] ... fixed-purpose events: 3
[ 0.059996] ... event mask: 0000000700000003
[ 0.077211] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.103372] CPU 1 irqstacks, hard=f64c8000 soft=f64ca000
[ 0.103378] Booting Node 0, Processors #1 Ok.
[ 0.103385] smpboot cpu 1: start_ip = 9a000
[ 0.009999] Initializing CPU#1
[ 0.009999] Atom PSE erratum detected, BIOS microcode update recommended
[ 0.009999] Disabled fast string operations
[ 0.200052] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.206667] Brought up 2 CPUs
[ 0.206675] Total of 2 processors activated (6402.39 BogoMIPS).
[ 0.207109] devtmpfs: initialized
[ 0.207109] PM: Registering ACPI NVS region at 3f5b2000 (143360 bytes)
[ 0.207109] PM: Registering ACPI NVS region at 3f5e6000 (12288 bytes)
[ 0.207109] PM: Registering ACPI NVS region at 3f605000 (4096 bytes)
[ 0.207109] PM: Registering ACPI NVS region at 3f611000 (24576 bytes)
[ 0.211215] print_constraints: dummy:
[ 0.211380] NET: Registered protocol family 16
[ 0.211719] ACPI: bus type pci registered
[ 0.296420] PCI: Using configuration type 1 for base access
[ 0.297939] bio: create slab <bio-0> at 0
[ 0.297939] ACPI: Added _OSI(Module Device)
[ 0.297939] ACPI: Added _OSI(Processor Device)
[ 0.297939] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.297939] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.300382] ACPI: EC: Look up EC in DSDT
[ 0.302439] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.306338] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.307064] ACPI: SSDT 3f5e8c90 00253 (v02 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 0.307561] ACPI: Dynamic OEM Table Load:
[ 0.307569] ACPI: SSDT (null) 00253 (v02 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 0.307899] ACPI: SSDT 3f5e7690 00653 (v02 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.308380] ACPI: Dynamic OEM Table Load:
[ 0.308388] ACPI: SSDT (null) 00653 (v02 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.317171] ACPI: SSDT 3f5e8f10 000D0 (v02 PmRef Cpu1Ist 00003000 INTL 20051117)
[ 0.317651] ACPI: Dynamic OEM Table Load:
[ 0.317659] ACPI: SSDT (null) 000D0 (v02 PmRef Cpu1Ist 00003000 INTL 20051117)
[ 0.317866] ACPI: SSDT 3f611b10 00083 (v02 PmRef Cpu1Cst 00003000 INTL 20051117)
[ 0.318325] ACPI: Dynamic OEM Table Load:
[ 0.318333] ACPI: SSDT (null) 00083 (v02 PmRef Cpu1Cst 00003000 INTL 20051117)
[ 0.319016] ACPI: Interpreter enabled
[ 0.319029] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.319081] ACPI: Using IOAPIC for interrupt routing
[ 0.332040] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[ 0.332331] ACPI: No dock devices found.
[ 0.332337] HEST: Table not found.
[ 0.332347] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.332744] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.333098] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.333106] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.333113] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.333120] pci_root PNP0A08:00: host bridge window [mem 0x000c0000-0x000fffff]
[ 0.333127] pci_root PNP0A08:00: host bridge window [mem 0x40000000-0xffefffff]
[ 0.333168] pci 0000:00:00.0: [8086:27ac] type 0 class 0x000600
[ 0.333232] pci 0000:00:02.0: [8086:27ae] type 0 class 0x000300
[ 0.333251] pci 0000:00:02.0: reg 10: [mem 0xdfe80000-0xdfefffff]
[ 0.333262] pci 0000:00:02.0: reg 14: [io 0xd0f0-0xd0f7]
[ 0.333274] pci 0000:00:02.0: reg 18: [mem 0xc0000000-0xcfffffff pref]
[ 0.333285] pci 0000:00:02.0: reg 1c: [mem 0xdff00000-0xdff3ffff]
[ 0.333362] pci 0000:00:02.1: [8086:27a6] type 0 class 0x000380
[ 0.333378] pci 0000:00:02.1: reg 10: [mem 0xdfe00000-0xdfe7ffff]
[ 0.333482] pci 0000:00:1b.0: [8086:27d8] type 0 class 0x000403
[ 0.333509] pci 0000:00:1b.0: reg 10: [mem 0xffe00000-0xffe03fff 64bit]
[ 0.333581] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.333590] pci 0000:00:1b.0: PME# disabled
[ 0.333621] pci 0000:00:1c.0: [8086:27d0] type 1 class 0x000604
[ 0.333693] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.333701] pci 0000:00:1c.0: PME# disabled
[ 0.333734] pci 0000:00:1c.2: [8086:27d4] type 1 class 0x000604
[ 0.333806] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.333814] pci 0000:00:1c.2: PME# disabled
[ 0.333847] pci 0000:00:1d.0: [8086:27c8] type 0 class 0x000c03
[ 0.333899] pci 0000:00:1d.0: reg 20: [io 0xd080-0xd09f]
[ 0.333944] pci 0000:00:1d.1: [8086:27c9] type 0 class 0x000c03
[ 0.333997] pci 0000:00:1d.1: reg 20: [io 0xd060-0xd07f]
[ 0.334041] pci 0000:00:1d.2: [8086:27ca] type 0 class 0x000c03
[ 0.334093] pci 0000:00:1d.2: reg 20: [io 0xd040-0xd05f]
[ 0.334138] pci 0000:00:1d.3: [8086:27cb] type 0 class 0x000c03
[ 0.334190] pci 0000:00:1d.3: reg 20: [io 0xd020-0xd03f]
[ 0.334244] pci 0000:00:1d.7: [8086:27cc] type 0 class 0x000c03
[ 0.334271] pci 0000:00:1d.7: reg 10: [mem 0xdff40000-0xdff403ff]
[ 0.334357] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.334366] pci 0000:00:1d.7: PME# disabled
[ 0.334394] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
[ 0.334472] pci 0000:00:1f.0: [8086:27b9] type 0 class 0x000601
[ 0.334580] pci 0000:00:1f.0: Force enabled HPET at 0xfed03000
[ 0.334602] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 004c (mask 0007)
[ 0.334654] pci 0000:00:1f.2: [8086:27c4] type 0 class 0x000101
[ 0.334675] pci 0000:00:1f.2: reg 10: [io 0xd0e0-0xd0e7]
[ 0.334689] pci 0000:00:1f.2: reg 14: [io 0xd0d0-0xd0d3]
[ 0.334703] pci 0000:00:1f.2: reg 18: [io 0xd0c0-0xd0c7]
[ 0.334716] pci 0000:00:1f.2: reg 1c: [io 0xd0b0-0xd0b3]
[ 0.334730] pci 0000:00:1f.2: reg 20: [io 0xd0a0-0xd0af]
[ 0.334770] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.334778] pci 0000:00:1f.2: PME# disabled
[ 0.334869] pci 0000:01:00.0: [10ec:8136] type 0 class 0x000200
[ 0.334891] pci 0000:01:00.0: reg 10: [io 0xc000-0xc0ff]
[ 0.334928] pci 0000:01:00.0: reg 18: [mem 0xffd10000-0xffd10fff 64bit pref]
[ 0.334954] pci 0000:01:00.0: reg 20: [mem 0xffd00000-0xffd0ffff 64bit pref]
[ 0.334972] pci 0000:01:00.0: reg 30: [mem 0xdfd00000-0xdfd0ffff pref]
[ 0.335022] pci 0000:01:00.0: supports D1 D2
[ 0.335027] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.335037] pci 0000:01:00.0: PME# disabled
[ 0.340012] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
[ 0.340021] pci 0000:00:1c.0: bridge window [io 0xc000-0xcfff]
[ 0.340030] pci 0000:00:1c.0: bridge window [mem 0xdfd00000-0xdfdfffff]
[ 0.340041] pci 0000:00:1c.0: bridge window [mem 0xffd00000-0xffdfffff 64bit pref]
[ 0.340129] pci 0000:02:00.0: [10ec:8199] type 0 class 0x000280
[ 0.340154] pci 0000:02:00.0: reg 10: [io 0xb000-0xb0ff]
[ 0.340175] pci 0000:02:00.0: reg 14: [mem 0xdfc00000-0xdfc03fff]
[ 0.340276] pci 0000:02:00.0: supports D1 D2
[ 0.340282] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot
[ 0.340291] pci 0000:02:00.0: PME# disabled
[ 0.346672] pci 0000:00:1c.2: PCI bridge to [bus 02-02]
[ 0.346681] pci 0000:00:1c.2: bridge window [io 0xb000-0xbfff]
[ 0.346689] pci 0000:00:1c.2: bridge window [mem 0xdfc00000-0xdfcfffff]
[ 0.346773] pci 0000:00:1e.0: PCI bridge to [bus 03-03] (subtractive decode)
[ 0.346789] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.346796] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.346803] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.346811] pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000fffff] (subtractive decode)
[ 0.346820] pci 0000:00:1e.0: bridge window [mem 0x40000000-0xffefffff] (subtractive decode)
[ 0.346845] pci_bus 0000:00: on NUMA node 0
[ 0.346856] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.347160] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[ 0.347263] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT]
[ 0.347582] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x1e)
[ 0.360432] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.360560] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.360684] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.360805] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.360927] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.361050] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.361173] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.361297] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.361478] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.361478] vgaarb: loaded
[ 0.361478] vgaarb: bridge control possible 0000:00:02.0
[ 0.361478] PCI: Using ACPI for IRQ routing
[ 0.361478] PCI: pci_cache_line_size set to 64 bytes
[ 0.361478] reserve RAM buffer: 000000000009ec00 - 000000000009ffff
[ 0.361478] reserve RAM buffer: 000000003f5b2000 - 000000003fffffff
[ 0.361478] NetLabel: Initializing
[ 0.361478] NetLabel: domain hash size = 128
[ 0.361478] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.361478] NetLabel: unlabeled traffic allowed by default
[ 0.361478] hpet clockevent registered
[ 0.361478] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.361478] hpet0: at MMIO 0xfed03000, IRQs 2, 8, 0
[ 0.361478] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.373339] Switching to clocksource hpet
[ 0.376447] Switched to NOHz mode on CPU #0
[ 0.376598] Switched to NOHz mode on CPU #1
[ 0.389045] pnp: PnP ACPI init
[ 0.389089] ACPI: bus type pnp registered
[ 0.389304] pnp 00:00: [bus 00-ff]
[ 0.389312] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.389318] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.389324] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.389331] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.389337] pnp 00:00: [mem 0x000c0000-0x000fffff window]
[ 0.389344] pnp 00:00: [mem 0x40000000-0xffefffff window]
[ 0.389483] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.389694] pnp 00:01: [mem 0xfed14000-0xfed17fff]
[ 0.389703] pnp 00:01: [mem 0xfed19000-0xfed19fff]
[ 0.389709] pnp 00:01: [mem 0xfed18000-0xfed18fff]
[ 0.389715] pnp 00:01: [mem 0xe0000000-0xefffffff]
[ 0.389822] system 00:01: [mem 0xfed14000-0xfed17fff] has been reserved
[ 0.389830] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.389837] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.389845] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.389853] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.389942] pnp 00:02: [io 0x0061]
[ 0.390070] pnp 00:02: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.390104] pnp 00:03: [dma 4]
[ 0.390110] pnp 00:03: [io 0x0000-0x000f]
[ 0.390116] pnp 00:03: [io 0x0081-0x0083]
[ 0.390121] pnp 00:03: [io 0x0087]
[ 0.390127] pnp 00:03: [io 0x0089-0x008b]
[ 0.390132] pnp 00:03: [io 0x008f]
[ 0.390137] pnp 00:03: [io 0x00c0-0x00df]
[ 0.390218] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.390248] pnp 00:04: [io 0x0070-0x0071]
[ 0.390269] pnp 00:04: [irq 8]
[ 0.390343] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.390394] pnp 00:05: [io 0x0010-0x001f]
[ 0.390401] pnp 00:05: [io 0x0022-0x003f]
[ 0.390406] pnp 00:05: [io 0x0044-0x005f]
[ 0.390411] pnp 00:05: [io 0x0063]
[ 0.390416] pnp 00:05: [io 0x0065]
[ 0.390422] pnp 00:05: [io 0x0067-0x006f]
[ 0.390427] pnp 00:05: [io 0x0072-0x007f]
[ 0.390432] pnp 00:05: [io 0x0080]
[ 0.390437] pnp 00:05: [io 0x0084-0x0086]
[ 0.390443] pnp 00:05: [io 0x0088]
[ 0.390452] pnp 00:05: [io 0x008c-0x008e]
[ 0.390457] pnp 00:05: [io 0x0090-0x009f]
[ 0.390463] pnp 00:05: [io 0x00a2-0x00bf]
[ 0.390468] pnp 00:05: [io 0x00e0-0x00ef]
[ 0.390473] pnp 00:05: [io 0x04d0-0x04d1]
[ 0.390597] system 00:05: [io 0x04d0-0x04d1] has been reserved
[ 0.390606] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.390634] pnp 00:06: [io 0x00f0-0x00ff]
[ 0.390648] pnp 00:06: [irq 13]
[ 0.390723] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.390774] pnp 00:07: [io 0x0060]
[ 0.390780] pnp 00:07: [io 0x0064]
[ 0.390793] pnp 00:07: [irq 1]
[ 0.390870] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.390919] pnp 00:08: [irq 12]
[ 0.391002] pnp 00:08: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
[ 0.391800] pnp 00:09: [io 0x0400-0x047f]
[ 0.391807] pnp 00:09: [io 0x1180-0x119f]
[ 0.391813] pnp 00:09: [io 0x0500-0x053f]
[ 0.391819] pnp 00:09: [mem 0xfec00000-0xfec00fff]
[ 0.391825] pnp 00:09: [mem 0xfee00000-0xfee00fff]
[ 0.391831] pnp 00:09: [mem 0xfed20000-0xfed23fff]
[ 0.391837] pnp 00:09: [mem 0xffb00000-0xffbfffff]
[ 0.391843] pnp 00:09: [mem 0xfc800400-0xfc800fff]
[ 0.391971] system 00:09: [io 0x0400-0x047f] has been reserved
[ 0.391979] system 00:09: [io 0x1180-0x119f] has been reserved
[ 0.391986] system 00:09: [io 0x0500-0x053f] has been reserved
[ 0.391995] system 00:09: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.392003] system 00:09: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.392010] system 00:09: [mem 0xfed20000-0xfed23fff] has been reserved
[ 0.392018] system 00:09: [mem 0xffb00000-0xffbfffff] has been reserved
[ 0.392025] system 00:09: [mem 0xfc800400-0xfc800fff] has been reserved
[ 0.392034] system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.392219] pnp 00:0a: [mem 0xfed03000-0xfed033ff]
[ 0.392311] pnp 00:0a: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.392683] pnp: PnP ACPI: found 11 devices
[ 0.392689] ACPI: ACPI bus type pnp unregistered
[ 0.434526] PCI: max bus depth: 1 pci_try_num: 2
[ 0.434578] pci 0000:00:1c.2: BAR 15: assigned [mem 0x40000000-0x401fffff 64bit pref]
[ 0.434586] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
[ 0.434594] pci 0000:00:1c.0: bridge window [io 0xc000-0xcfff]
[ 0.434604] pci 0000:00:1c.0: bridge window [mem 0xdfd00000-0xdfdfffff]
[ 0.434614] pci 0000:00:1c.0: bridge window [mem 0xffd00000-0xffdfffff 64bit pref]
[ 0.434625] pci 0000:00:1c.2: PCI bridge to [bus 02-02]
[ 0.434632] pci 0000:00:1c.2: bridge window [io 0xb000-0xbfff]
[ 0.434642] pci 0000:00:1c.2: bridge window [mem 0xdfc00000-0xdfcfffff]
[ 0.434651] pci 0000:00:1c.2: bridge window [mem 0x40000000-0x401fffff 64bit pref]
[ 0.434662] pci 0000:00:1e.0: PCI bridge to [bus 03-03]
[ 0.434704] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.434714] pci 0000:00:1c.0: setting latency timer to 64
[ 0.434732] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.434741] pci 0000:00:1c.2: setting latency timer to 64
[ 0.434753] pci 0000:00:1e.0: setting latency timer to 64
[ 0.434762] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.434768] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.434774] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.434781] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000fffff]
[ 0.434788] pci_bus 0000:00: resource 8 [mem 0x40000000-0xffefffff]
[ 0.434795] pci_bus 0000:01: resource 0 [io 0xc000-0xcfff]
[ 0.434801] pci_bus 0000:01: resource 1 [mem 0xdfd00000-0xdfdfffff]
[ 0.434808] pci_bus 0000:01: resource 2 [mem 0xffd00000-0xffdfffff 64bit pref]
[ 0.434815] pci_bus 0000:02: resource 0 [io 0xb000-0xbfff]
[ 0.434821] pci_bus 0000:02: resource 1 [mem 0xdfc00000-0xdfcfffff]
[ 0.434828] pci_bus 0000:02: resource 2 [mem 0x40000000-0x401fffff 64bit pref]
[ 0.434835] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7]
[ 0.434842] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff]
[ 0.434848] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.434855] pci_bus 0000:03: resource 7 [mem 0x000c0000-0x000fffff]
[ 0.434861] pci_bus 0000:03: resource 8 [mem 0x40000000-0xffefffff]
[ 0.434985] NET: Registered protocol family 2
[ 0.435160] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.435729] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.436781] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.437232] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.437239] TCP reno registered
[ 0.437250] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.437270] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.437555] NET: Registered protocol family 1
[ 0.437599] pci 0000:00:02.0: Boot video device
[ 0.437847] PCI: CLS 64 bytes, default 64
[ 0.437984] Unpacking initramfs...
[ 0.537031] Freeing initrd memory: 2888k freed
[ 0.540348] apm: BIOS not found.
[ 0.540853] audit: initializing netlink socket (disabled)
[ 0.540876] type=2000 audit(1324649726.539:1): initialized
[ 0.544033] highmem bounce pool size: 64 pages
[ 0.544046] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.548701] VFS: Disk quotas dquot_6.5.2
[ 0.548918] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.549214] msgmni has been set to 1735
[ 0.549715] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.549789] io scheduler noop registered
[ 0.549796] io scheduler deadline registered
[ 0.549831] io scheduler cfq registered (default)
[ 0.550527] intel_idle: MWAIT substates: 0x20220
[ 0.550545] intel_idle: v0.4 model 0x1C
[ 0.550549] intel_idle: lapic_timer_reliable_states 0x2
[ 0.550571] Marking TSC unstable due to TSC halts in idle states deeper than C2
[ 0.550668] ERST: Table is not found!
[ 0.550673] GHES: HEST is not enabled!
[ 0.550703] isapnp: Scanning for PnP cards...
[ 0.906687] isapnp: No Plug & Play device found
[ 0.906888] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 1.097635] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 1.115862] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.115949] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.116274] mousedev: PS/2 mouse device common for all mice
[ 1.117231] rtc_cmos 00:04: RTC can wake from S4
[ 1.117474] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 1.117513] rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
[ 1.117751] cpuidle: using governor ladder
[ 1.118043] cpuidle: using governor menu
[ 1.118603] TCP cubic registered
[ 1.118610] NET: Registered protocol family 17
[ 1.118626] Registering the dns_resolver key type
[ 1.118673] Using IPI No-Shortcut mode
[ 1.119032] PM: Hibernation image not present or could not be loaded.
[ 1.119051] registered taskstats version 1
[ 1.119524] rtc_cmos 00:04: setting system clock to 2011-12-23 14:15:27 UTC (1324649727)
[ 1.119658] Initializing network drop monitor service
[ 1.119813] Freeing unused kernel memory: 512k freed
[ 1.120308] Write protecting the kernel text: 3476k
[ 1.120363] Write protecting the kernel read-only data: 1072k
[ 1.131483] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.143668] udevd[37]: starting version 175
[ 1.150454] acpi device:1b: registered as cooling_device0
[ 1.150690] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input1
[ 1.150714] ACPI: Video Device [IGD] (multi-head: yes rom: no post: no)
[ 1.156408] Linux agpgart interface v0.103
[ 1.159703] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:11/PNP0C09:00/PNP0C0D:00/input/input2
[ 1.160113] ACPI: Lid Switch [LID0]
[ 1.160323] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
[ 1.160342] ACPI: Power Button [PWRB]
[ 1.160524] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input4
[ 1.160541] ACPI: Sleep Button [SLPB]
[ 1.160733] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[ 1.160748] ACPI: Power Button [PWRF]
[ 1.162864] atkbd serio0: Unknown key pressed (translated set 2, code 0xf8 on isa0060/serio0).
[ 1.162875] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known.
[ 1.163122] agpgart-intel 0000:00:00.0: Intel 945GME Chipset
[ 1.163414] agpgart-intel 0000:00:00.0: detected gtt size: 262144K total, 262144K mappable
[ 1.163611] agpgart-intel 0000:00:00.0: detected 8192K stolen memory
[ 1.164256] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000
[ 1.166318] atkbd serio0: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0).
[ 1.166330] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known.
[ 1.169036] atkbd serio0: Unknown key pressed (translated set 2, code 0xf7 on isa0060/serio0).
[ 1.169047] atkbd serio0: Use 'setkeycodes e077 <keycode>' to make it known.
[ 1.172803] atkbd serio0: Unknown key released (translated set 2, code 0xf7 on isa0060/serio0).
[ 1.172815] atkbd serio0: Use 'setkeycodes e077 <keycode>' to make it known.
[ 1.188239] [drm] Initialized drm 1.1.0 20060810
[ 1.224925] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.224937] i915 0000:00:02.0: setting latency timer to 64
[ 1.265878] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 1.265888] [drm] Driver supports precise vblank timestamp query.
[ 1.266086] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 1.319929] composite sync not supported
[ 1.320086] fixme: max PWM is zero.
[ 1.587275] [drm] initialized overlay support
[ 1.587345] composite sync not supported
[ 1.605988] fbcon: inteldrmfb (fb0) is primary device
[ 1.981043] Console: switching to colour frame buffer device 128x37
[ 1.988434] fb0: inteldrmfb frame buffer device
[ 1.988439] drm: registered panic notifier
[ 1.988475] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 2.248572] usbcore: registered new interface driver usbfs
[ 2.248657] usbcore: registered new interface driver hub
[ 2.249489] usbcore: registered new device driver usb
[ 2.251040] SCSI subsystem initialized
[ 2.259787] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.260561] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 2.260606] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 2.260617] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 2.260718] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 2.260778] ehci_hcd 0000:00:1d.7: using broken periodic workaround
[ 2.260798] ehci_hcd 0000:00:1d.7: debug port 1
[ 2.264722] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[ 2.264780] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xdff40000
[ 2.283402] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 2.285826] hub 1-0:1.0: USB hub found
[ 2.285847] hub 1-0:1.0: 8 ports detected
[ 2.288295] libata version 3.00 loaded.
[ 2.290369] ata_piix 0000:00:1f.2: version 2.13
[ 2.290414] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 2.290430] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
[ 2.292423] uhci_hcd: USB Universal Host Controller Interface driver
[ 2.443498] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 2.444782] scsi0 : ata_piix
[ 2.445094] scsi1 : ata_piix
[ 2.445291] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xd0a0 irq 14
[ 2.445302] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xd0a8 irq 15
[ 2.445470] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 2.445495] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 2.445506] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 2.445547] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 2.445642] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000d080
[ 2.446368] hub 2-0:1.0: USB hub found
[ 2.446387] hub 2-0:1.0: 2 ports detected
[ 2.446591] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 2.446608] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 2.446615] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 2.446639] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 2.446759] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d060
[ 2.447433] hub 3-0:1.0: USB hub found
[ 2.447451] hub 3-0:1.0: 2 ports detected
[ 2.447651] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 2.447668] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 2.447676] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 2.447710] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 2.447776] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d040
[ 2.448202] hub 4-0:1.0: USB hub found
[ 2.448220] hub 4-0:1.0: 2 ports detected
[ 2.448415] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[ 2.448430] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 2.448438] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 2.448460] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 2.448503] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000d020
[ 2.448921] hub 5-0:1.0: USB hub found
[ 2.448939] hub 5-0:1.0: 2 ports detected
[ 2.659902] ata1.00: ATA-8: WDC WD1600BEVT-22ZCT0, 11.01A11, max UDMA/133
[ 2.659920] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 2.667781] ata1.00: configured for UDMA/133
[ 2.668299] scsi 0:0:0:0: Direct-Access ATA WDC WD1600BEVT-2 11.0 PQ: 0 ANSI: 5
[ 2.683471] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[ 2.683723] sd 0:0:0:0: [sda] Write Protect is off
[ 2.683734] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.683842] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.692118] sda: sda1
[ 2.693040] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.696769] usb 1-5: new high speed USB device number 3 using ehci_hcd
[ 3.170129] usb 1-6: new high speed USB device number 4 using ehci_hcd
[ 3.317362] Initializing USB Mass Storage driver...
[ 3.317971] usbcore: registered new interface driver usb-storage
[ 3.317979] USB Mass Storage support registered.
[ 3.322099] scsi2 : usb-storage 1-6:1.0
[ 3.322520] usbcore: registered new interface driver ums-realtek
[ 3.416768] usb 2-2: new full speed USB device number 2 using uhci_hcd
[ 3.635132] input: USB Audio as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.3/input/input6
[ 3.635360] generic-usb 0003:145F:0090.0001: input,hidraw0: USB HID v1.00 Device [USB Audio] on usb-0000:00:1d.0-2/input3
[ 3.635428] usbcore: registered new interface driver usbhid
[ 3.635436] usbhid: USB HID core driver
[ 4.322701] scsi 2:0:0:0: Direct-Access Generic- Multi-Card 1.00 PQ: 0 ANSI: 0 CCS
[ 4.913915] sd 2:0:0:0: [sdb] 7744512 512-byte logical blocks: (3.96 GB/3.69 GiB)
[ 4.914769] sd 2:0:0:0: [sdb] Write Protect is off
[ 4.914786] sd 2:0:0:0: [sdb] Mode Sense: 03 00 00 00
[ 4.915595] sd 2:0:0:0: [sdb] No Caching mode page present
[ 4.915719] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 4.919220] sd 2:0:0:0: [sdb] No Caching mode page present
[ 4.919347] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 4.923329] sdb: sdb1
[ 4.929111] sd 2:0:0:0: [sdb] No Caching mode page present
[ 4.929240] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 4.929366] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[ 6.138695] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
[ 7.223153] udevd[212]: starting version 175
[ 7.443915] ACPI: acpi_idle yielding to intel_idle
[ 7.554955] thermal LNXTHERM:00: registered as thermal_zone0
[ 7.554966] ACPI: Thermal Zone [THRM] (51 C)
[ 7.644996] ACPI: Battery Slot [BAT1] (battery absent)
[ 7.653955] ACPI: AC Adapter [ADP1] (on-line)
[ 7.658769] wmi: Mapper loaded
[ 7.715478] leds_ss4200: no LED devices found
[ 7.728095] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 7.728180] r8169 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 7.728246] r8169 0000:01:00.0: setting latency timer to 64
[ 7.728334] r8169 0000:01:00.0: irq 40 for MSI/MSI-X
[ 7.729275] r8169 0000:01:00.0: eth0: RTL8102e at 0xf8a8a000, 00:21:85:e3:77:df, XID 14a00000 IRQ 40
[ 7.735821] r8187se: module is from the staging directory, the quality is unknown, you have been warned.
[ 7.746749] iTCO_vendor_support: vendor-support=0
[ 7.750136] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
[ 7.750361] iTCO_wdt: Found a ICH7-M or ICH7-U TCO device (Version=2, TCOBASE=0x0460)
[ 7.750559] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 7.756571] intel_rng: FWH not detected
[ 7.762766] ieee80211_crypt: registered algorithm 'NULL'
[ 7.762776] ieee80211_crypt: registered algorithm 'TKIP'
[ 7.762783] ieee80211_crypt: registered algorithm 'CCMP'
[ 7.762790] ieee80211_crypt: registered algorithm 'WEP'
[ 7.762796]
[ 7.762798] Linux kernel driver for RTL8180 / RTL8185 based WLAN cards
[ 7.762804] Copyright (c) 2004-2005, Andrea Merello
[ 7.762810] r8180: Initializing module
[ 7.762815] r8180: Wireless extensions version 22
[ 7.762820] r8180: Initializing proc filesystem
[ 7.762882] r8180: Configuring chip resources
[ 7.762909] r8180 0000:02:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 7.762921] r8180 0000:02:00.0: setting latency timer to 64
[ 7.768881] r8180: Channel plan is 2
[ 7.768886]
[ 7.768894] Dot11d_Init()
[ 7.768903] r8180: MAC controller is a RTL8187SE b/g
[ 7.773233] r8180: usValue is 0x100
[ 7.773238]
[ 7.819366] r8180: EEPROM version 104
[ 7.826174] r8180: WW:**PLEASE** REPORT SUCCESSFUL/UNSUCCESSFUL TO Realtek!
[ 7.827092] r8180: IRQ 18
[ 7.835993] r8180: Driver probe completed
[ 7.835998]
[ 8.037634] Linux media interface: v0.10
[ 8.167472] Linux video capture interface: v2.00
[ 8.186513] uvcvideo: Found UVC 1.00 device BisonCam, NB Pro (5986:0203)
[ 8.190720] input: BisonCam, NB Pro as /devices/pci0000:00/0000:00:1d.7/usb1/1-5/1-5:1.0/input/input7
[ 8.191076] usbcore: registered new interface driver uvcvideo
[ 8.191084] USB Video Class driver (1.1.1)
[ 8.549682] Synaptics Touchpad, model: 1, fw: 6.5, id: 0x1c0b1, caps: 0xa04711/0xa00000/0x0
[ 8.614088] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input8
[ 8.621658] usbcore: registered new interface driver snd-usb-audio
[ 9.252751] EXT4-fs (sdb1): re-mounted. Opts: (null)
[ 9.304782] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)Last edited by dabbi2000 (2011-12-23 22:15:33)
Offline
Do you have all these drivers installed?
[ 1169.883] List of video drivers:
[ 1169.883] geode
[ 1169.883] ztv
[ 1169.883] i740
[ 1169.883] siliconmotion
[ 1169.883] sisusb
[ 1169.884] xgi
[ 1169.884] xgixp
[ 1169.884] dummy
[ 1169.884] nv
[ 1169.884] tseng
[ 1169.884] s3virge
[ 1169.884] ast
[ 1169.884] voodoo
[ 1169.884] r128
[ 1169.884] intel
[ 1169.885] s3
[ 1169.885] apm
[ 1169.885] ark
[ 1169.885] chips
[ 1169.885] vmware
[ 1169.885] vmwlegacy
[ 1169.885] i128
[ 1169.885] neomagic
[ 1169.885] trident
[ 1169.885] cirrus
[ 1169.886] glint
[ 1169.886] savage
[ 1169.886] mga
[ 1169.886] rendition
[ 1169.886] sis
[ 1169.886] mach64
[ 1169.886] tdfx
[ 1169.886] v4l
[ 1169.886] fbdev
[ 1169.887] vesaYou only need the Intel driver so remove the rest. If you installed the whole xorg group, remove it and reinstall only the Intel drivers + xorg-server and friends (see wiki).
Last edited by karol (2011-12-23 14:55:04)
Offline
Do you know the syntax to remove all xf86-video* packages (instead of each and every one manually)?
Offline
Do you know the syntax to remove all xf86-video* packages (instead of each and every one manually)?
Have you tried removing the whole xorg or the the whole xorg-drivers group? The latter may not work, because:
[karol@black ~]$ pacman -Rns xorg-drivers
checking dependencies...
error: failed to prepare transaction (could not satisfy dependencies)
:: xorg-server: requires xf86-input-evdevthat's why I suggester removing the whole xorg group.
You can use the '-dd' switch:
[karol@black ~]$ pacman -Rdd xorg-drivers
Targets (4):
Name Old Version New Version Net Change
xf86-input-evdev 2.6.0-4 -0,05 MiB
xf86-video-fbdev 0.4.2-5 -0,03 MiB
xf86-video-intel 2.17.0-2 -0,78 MiB
xf86-video-vesa 2.3.0-7 -0,04 MiB
Total Removed Size: 0,90 MiB
Do you want to remove these packages? [Y/n] just be sure to reinstall Intel drivers.
Last edited by karol (2011-12-23 15:52:06)
Offline
Problem fixed.
Really wish I could tell you what did it but I removed xorg & all xf86-video drivers which btw can be done single-handedly by:
pacman -Rns $(pacman -Qqs xorg-drivers | grep -v xf86-input-evdev)and then installed the intel drivers again and xorg. I was trying startx as root, might have led to some false errors - after fiddling around with config settings I tried startx as normal user and suddenly the screen was displaying again.
In the meantime I found out Xorg -configure is obsolete since the configuration is done automatically each boot and then fine tuned by the /etc/X11/xorg.conf.d/... files
Also I found out that the /var/log files had filled my 4gb SD drive (especially auth.log which was 800mb) I suspect the pacman -Syu updated somehow was broken as the drive was filled. Did a pacman -Sc to clear the cache and have to figure out how to reduce the logging...
Last edited by dabbi2000 (2011-12-23 22:17:17)
Offline
It actually should be 'pacman -Qqg xorg-drivers': '-Qqg', not '-Qqs', but both work in your case :-)
Offline