Libreoffice crashes with no error

nadman10 · 2011-12-28 19:01:19

After a full system update, Libreoffice crashes on startup with no errors in the console. The splash screen flashes and then the app crashes. If I run it as root, I do get the error: "Application Error". Where do I look next to investigate?

karol · 2011-12-28 19:10:42

What apps did you update?

nadman10 · 2011-12-28 19:27:15

Full system update. So, all of them.

karol · 2011-12-28 19:35:50

nadman10 wrote:

Full system update. So, all of them.

Can you post the log? Tell us at least if you're using the [testing] repo + which java version and which phonon-backend provider you use.

nadman10 · 2011-12-28 19:38:33

My pacman.log?

karol · 2011-12-28 20:00:12

nadman10 wrote:

My pacman.log?

Yup.

I can't reproduce this issue on my 32-bit Arch.

nadman10 · 2011-12-28 20:01:47

pacman.log

[2011-12-24 17:34] modprobe.blacklist=mod1
[2011-12-24 17:34]   --
[2011-12-24 17:34] The following modules are no longer unconditionally loaded:
[2011-12-24 17:34]   pcspkr irtty-sir analog lp ppdev ide-generic
[2011-12-24 17:34] Add them to MODULES in rc.conf if you need them.
[2011-12-24 17:34]   --
[2011-12-24 17:34] Support for non-devtmpfs self-compiled kernels have been moved to udev-compat.
[2011-12-24 17:34]   --
[2011-12-24 17:34] Blacklisting of framebuffer devices has moved from /etc/modprobe.d to
[2011-12-24 17:34] /lib/modprobe.d. Any customizations shoud be done to the file in /etc, as it
[2011-12-24 17:34] takes precedence.
[2011-12-24 17:34]   --
[2011-12-24 17:34] kbd and rtc devices are no longer world readable.
[2011-12-24 17:34]   --
[2011-12-24 17:34] rtc is no longer in the audio group and fb devices are no longer in
[2011-12-24 17:34] the video group, as permissions and ownership of fb devices are controlled
[2011-12-24 17:34] by X.
[2011-12-24 17:34]   --
[2011-12-24 17:34] We now use upstream rules for assigning devices to the 'disk', 'optical',
[2011-12-24 17:34] 'scanner' and 'video' groups. Beware of any changes.
[2011-12-24 17:34]   --
[2011-12-24 17:34] We no longer create symlinks from /dev/<dev> to /dev/<dev>0.
[2011-12-24 17:34]   --
[2011-12-24 17:34] For security reasons, we no longer add devices to the 'storage' group. Use
[2011-12-24 17:34] udisks and friends, or add custom rules to /etc/udev.d/rules/, if you want
[2011-12-24 17:34] this functionality back.
[2011-12-24 17:34]  --
[2011-12-24 17:34] We no longer create the static nodes on install needed for an initrd-less and
[2011-12-24 17:34] devtmpfs-less boot, this only affects fresh installs.
[2011-12-24 17:34] ---------------
[2011-12-24 17:34] upgraded udev (168-2 -> 175-1)
[2011-12-24 17:34] upgraded mkinitcpio (0.6.12-1 -> 0.8.0-3)
[2011-12-24 17:35] >>> Updating module dependencies. Please wait ...
[2011-12-24 17:35] >>> Generating initial ramdisk, using mkinitcpio.  Please wait...
[2011-12-24 17:35] ==> Building image from preset: 'default'
[2011-12-24 17:35]   -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
[2011-12-24 17:35] ==> Starting build: 3.1.5-1-ARCH
[2011-12-24 17:35]   -> Parsing hook: [base]
[2011-12-24 17:35]   -> Parsing hook: [udev]
[2011-12-24 17:35]   -> Parsing hook: [autodetect]
[2011-12-24 17:36]   -> Parsing hook: [pata]
[2011-12-24 17:36]   -> Parsing hook: [scsi]
[2011-12-24 17:36]   -> Parsing hook: [sata]
[2011-12-24 17:36]   -> Parsing hook: [filesystems]
[2011-12-24 17:36]   -> Parsing hook: [usbinput]
[2011-12-24 17:36] ==> Generating module dependencies
[2011-12-24 17:36] ==> Creating gzip initcpio image: /boot/initramfs-linux.img
[2011-12-24 17:36] ==> Image generation successful
[2011-12-24 17:36] ==> Building image from preset: 'fallback'
[2011-12-24 17:36]   -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
[2011-12-24 17:36] ==> Starting build: 3.1.5-1-ARCH
[2011-12-24 17:36]   -> Parsing hook: [base]
[2011-12-24 17:36]   -> Parsing hook: [udev]
[2011-12-24 17:36]   -> Parsing hook: [pata]
[2011-12-24 17:36]   -> Parsing hook: [scsi]
[2011-12-24 17:36]   -> Parsing hook: [sata]
[2011-12-24 17:36]   -> Parsing hook: [filesystems]
[2011-12-24 17:36]   -> Parsing hook: [usbinput]
[2011-12-24 17:36] ==> Generating module dependencies
[2011-12-24 17:36] ==> Creating gzip initcpio image: /boot/initramfs-linux-fallback.img
[2011-12-24 17:36] ==> Image generation successful
[2011-12-24 17:36] installed linux (3.1.5-1)
[2011-12-24 17:36] Running 'pacman -Sy kernel26'
[2011-12-24 17:36] synchronizing package lists
[2011-12-24 17:36] >>> Updating module dependencies. Please wait ...
[2011-12-24 17:36] >>> Generating initial ramdisk, using mkinitcpio.  Please wait...
[2011-12-24 17:36] ==> Building image from preset: 'default'
[2011-12-24 17:36]   -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
[2011-12-24 17:36] ==> Starting build: 3.1.5-1-ARCH
[2011-12-24 17:36]   -> Parsing hook: [base]
[2011-12-24 17:36]   -> Parsing hook: [udev]
[2011-12-24 17:37]   -> Parsing hook: [autodetect]
[2011-12-24 17:37]   -> Parsing hook: [pata]
[2011-12-24 17:37]   -> Parsing hook: [scsi]
[2011-12-24 17:37]   -> Parsing hook: [sata]
[2011-12-24 17:37]   -> Parsing hook: [filesystems]
[2011-12-24 17:37]   -> Parsing hook: [usbinput]
[2011-12-24 17:37] ==> Generating module dependencies
[2011-12-24 17:37] ==> Creating gzip initcpio image: /boot/initramfs-linux.img
[2011-12-24 17:37] ==> Image generation successful
[2011-12-24 17:37] ==> Building image from preset: 'fallback'
[2011-12-24 17:37]   -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
[2011-12-24 17:37] ==> Starting build: 3.1.5-1-ARCH
[2011-12-24 17:37]   -> Parsing hook: [base]
[2011-12-24 17:37]   -> Parsing hook: [udev]
[2011-12-24 17:37]   -> Parsing hook: [pata]
[2011-12-24 17:37]   -> Parsing hook: [scsi]
[2011-12-24 17:37]   -> Parsing hook: [sata]
[2011-12-24 17:37]   -> Parsing hook: [filesystems]
[2011-12-24 17:37]   -> Parsing hook: [usbinput]
[2011-12-24 17:37] ==> Generating module dependencies
[2011-12-24 17:37] ==> Creating gzip initcpio image: /boot/initramfs-linux-fallback.img
[2011-12-24 17:37] ==> Image generation successful
[2011-12-24 17:37] upgraded linux (3.1.5-1 -> 3.1.5-1)
[2011-12-24 17:38] Running 'pacman -Suy'
[2011-12-24 17:38] synchronizing package lists
[2011-12-24 17:38] starting full system upgrade
[2011-12-24 17:39] Running 'pacman -Sy libreoffice'
[2011-12-24 17:39] synchronizing package lists
[2011-12-24 18:12] removed jre (6u25-1)
[2011-12-24 18:12] installed graphite (1:1.0.3-1)
[2011-12-24 18:15] gtk-update-icon-cache: Failed to write cache file: Input/output error
[2011-12-24 18:15] upgraded libreoffice-common (3.4.3-2 -> 3.4.4-4)
[2011-12-24 18:15] installed libreoffice-base (3.4.4-4)
[2011-12-24 18:15] upgraded libreoffice-calc (3.4.4-3 -> 3.4.4-4)
[2011-12-24 18:15] installed libreoffice-draw (3.4.4-4)
[2011-12-24 18:15] installed libreoffice-gnome (3.4.4-4)
[2011-12-24 18:15] installed libreoffice-impress (3.4.4-4)
[2011-12-24 18:15] installed libreoffice-kde4 (3.4.4-4)
[2011-12-24 18:15] installed libreoffice-math (3.4.4-4)
[2011-12-24 18:15] installed zip (3.0-2)
[2011-12-24 18:15] installed ca-certificates-java (20110912-1)
[2011-12-24 18:15] installed lcms2 (2.3-1)
[2011-12-24 18:16] done.
[2011-12-24 18:16] when you use a non-reparenting window manager
[2011-12-24 18:16] set _JAVA_AWT_WM_NONREPARENTING=1 in
[2011-12-24 18:16] /etc/profile.d/jre.sh
[2011-12-24 18:16] installed jre7-openjdk (7.b147_2.0-4)
[2011-12-24 18:16] installed jdk7-openjdk (7.b147_2.0-4)
[2011-12-24 18:17] installed libreoffice-sdk (3.4.4-4)
[2011-12-24 18:17] installed libreoffice-sdk-doc (3.4.4-4)
[2011-12-24 18:17] upgraded libreoffice-writer (3.4.4-3 -> 3.4.4-4)
[2011-12-24 23:26] Running 'pacman -Suy'
[2011-12-24 23:26] synchronizing package lists
[2011-12-24 23:26] starting full system upgrade
[2011-12-24 23:27] Running 'pacman -Sy qt3'
[2011-12-24 23:27] synchronizing package lists
[2011-12-24 23:29] upgraded qt3 (3.3.8-20 -> 3.3.8-21)
[2011-12-24 23:37] Running 'pacman -Suy'
[2011-12-24 23:37] synchronizing package lists
[2011-12-24 23:37] starting full system upgrade
[2011-12-24 23:41] Running 'pacman -Suy'
[2011-12-24 23:41] synchronizing package lists
[2011-12-24 23:41] starting full system upgrade
[2011-12-24 23:43] removed cyrus-sasl-plugins (2.1.23-5)
[2011-12-24 23:43] removed pygobject (2.28.4-1)
[2011-12-24 23:43] removed zope-interface (3.6.1-1)
[2011-12-24 23:43] upgraded gcc-libs (4.6.0-5 -> 4.6.2-3)
[2011-12-24 23:43] upgraded xproto (7.0.21-1 -> 7.0.22-1)
[2011-12-24 23:43] upgraded libx11 (1.4.3-2 -> 1.4.4-1)
[2011-12-24 23:43] upgraded sdl (1.2.14-6 -> 1.2.14-10)
[2011-12-24 23:43] upgraded zlib (1.2.5-3 -> 1.2.5-4)
[2011-12-24 23:43] upgraded bzip2 (1.0.6-1 -> 1.0.6-3)
[2011-12-24 23:43] upgraded ncurses (5.9-1 -> 5.9-2)
[2011-12-24 23:43] upgraded readline (6.2.001-1 -> 6.2.002-1)
[2011-12-24 23:43] upgraded bash (4.2.010-1 -> 4.2.020-1)
[2011-12-24 23:43] upgraded freetype2 (2.4.4-2 -> 2.4.8-1)
[2011-12-24 23:43] upgraded agg (2.5-3 -> 2.5-4)
[2011-12-24 23:43] upgraded shared-mime-info (0.90-1 -> 0.91-1)
[2011-12-24 23:43] upgraded boost-libs (1.46.0-4 -> 1.48.0-2)
[2011-12-24 23:43] upgraded gdbm (1.8.3-8 -> 1.10-1)
[2011-12-24 23:43] upgraded perl (5.12.3-1 -> 5.14.2-4)
[2011-12-24 23:43] upgraded openssl (1.0.0.d-1 -> 1.0.0.e-1)
[2011-12-24 23:43] upgraded libmysqlclient (5.5.12-1 -> 5.5.19-1)
[2011-12-24 23:43] upgraded mysql-clients (5.5.12-1 -> 5.5.19-1)
[2011-12-24 23:44] upgraded mysql (5.5.12-1 -> 5.5.19-1)
[2011-12-24 23:44] upgraded akonadi (1.5.3-1 -> 1.6.2-2)
[2011-12-24 23:44] upgraded alsa-oss (1.0.17-1 -> 1.0.17-2)
[2011-12-24 23:44] upgraded dialog (1.1_20110302-1 -> 1.1_20111020-1)
[2011-12-24 23:44] upgraded pciutils (3.1.7-4 -> 3.1.8-1)
[2011-12-24 23:44] upgraded psmisc (22.13-1 -> 22.14-1)
[2011-12-24 23:44] upgraded alsa-utils (1.0.24.2-1 -> 1.0.24.2-3)
[2011-12-24 23:44] upgraded util-linux (2.19.1-2 -> 2.20.1-1)
[2011-12-24 23:44] upgraded apr (1.4.4-1 -> 1.4.5-1)
[2011-12-24 23:44] upgraded expat (2.0.1-6 -> 2.0.1-7)
[2011-12-24 23:44] upgraded libsasl (2.1.23-5 -> 2.1.23-8)
[2011-12-24 23:44] upgraded e2fsprogs (1.41.14-1 -> 1.41.14-2)
[2011-12-24 23:44] upgraded libldap (2.4.24-1 -> 2.4.28-1)
[2011-12-24 23:44] installed libltdl (2.4.2-2)
[2011-12-24 23:44] upgraded unixodbc (2.3.0-1 -> 2.3.1-1)
[2011-12-24 23:44] upgraded apr-util (1.3.11-1 -> 1.3.12-4)
[2011-12-24 23:44] upgraded pcre (8.12-1 -> 8.21-1)
[2011-12-24 23:44] warning: /etc/httpd/conf/httpd.conf installed as /etc/httpd/conf/httpd.conf.pacnew
[2011-12-24 23:44] upgraded apache (2.2.17-3 -> 2.2.21-1)
[2011-12-24 23:44] upgraded aspell (0.60.6-5 -> 0.60.6.1-1)
[2011-12-24 23:44] upgraded atk (2.0.0-1 -> 2.2.0-1)
[2011-12-24 23:44] upgraded libpng (1.4.5-1 -> 1.4.8-1)
[2011-12-24 23:44] upgraded libjpeg-turbo (1.1.0-1 -> 1.1.1-4)
[2011-12-24 23:44] upgraded libmng (1.0.10-3 -> 1.0.10-4)
[2011-12-24 23:44] upgraded run-parts (3.4.4-1 -> 4.0.4-1)
[2011-12-24 23:44] upgraded findutils (4.4.2-3 -> 4.4.2-4)
[2011-12-24 23:44] upgraded sed (4.2.1-3 -> 4.2.1-4)
[2011-12-24 23:45] upgraded ca-certificates (20110421-3 -> 20111211-1)
[2011-12-24 23:45] upgraded dbus-core (1.4.8-1 -> 1.4.16-1)
[2011-12-24 23:45] upgraded dbus (1.4.8-1 -> 1.4.16-1)
[2011-12-24 23:45] upgraded libxfont (1.4.3-1 -> 1.4.4-1)
[2011-12-24 23:45] upgraded libdrm (2.4.25-1 -> 2.4.29-1)
[2011-12-24 23:45] upgraded pixman (0.20.2-1 -> 0.24.0-1)
[2011-12-24 23:45] upgraded libgpg-error (1.9-3 -> 1.10-1)
[2011-12-24 23:45] upgraded libgcrypt (1.4.6-3 -> 1.5.0-1)
[2011-12-24 23:45] upgraded xorg-xkbcomp (1.2.1-2 -> 1.2.3-1)
[2011-12-24 23:45] upgraded xkeyboard-config (2.2.1-1 -> 2.4.1-2)
[2011-12-24 23:45] upgraded xorg-server-common (1.10.1-1 -> 1.11.3-1)
[2011-12-24 23:45] upgraded xf86-input-evdev (2.6.0-3 -> 2.6.0-4)
[2011-12-24 23:45] upgraded xorg-server (1.10.1-1 -> 1.11.3-1)
[2011-12-24 23:45] upgraded nvidia-utils (270.41.06-1 -> 290.10-1)
[2011-12-24 23:45] upgraded libxrandr (1.3.1-1 -> 1.3.2-2)
[2011-12-24 23:45] upgraded inputproto (2.0.1-1 -> 2.0.2-1)
[2011-12-24 23:45] upgraded libxi (1.4.2-1 -> 1.4.5-1)
[2011-12-24 23:45] upgraded xorg-xset (1.2.1-2 -> 1.2.2-1)
[2011-12-24 23:45] upgraded xdg-utils (1.1.0rc1-2 -> 1.1.0rc1-3)
[2011-12-24 23:46] upgraded qt (4.7.3-1 -> 4.8.0-2)
[2011-12-24 23:46] upgraded attica (0.2.0-1 -> 0.2.9-1)
[2011-12-24 23:46] upgraded audiofile (0.2.7-1 -> 0.3.2-1)
[2011-12-24 23:46] upgraded gawk (3.1.8-2 -> 4.0.0-2)
[2011-12-24 23:46] upgraded m4 (1.4.16-1 -> 1.4.16-2)
[2011-12-24 23:46] upgraded diffutils (3.0-2 -> 3.2-1)
[2011-12-24 23:46] upgraded autoconf (2.68-1 -> 2.68-2)
[2011-12-24 23:46] upgraded libcap (2.21-1 -> 2.22-2)
[2011-12-24 23:46] upgraded avahi (0.6.30-2 -> 0.6.30-6)
[2011-12-24 23:46] upgraded babl (0.1.4-1 -> 0.1.6-1)
[2011-12-24 23:46] upgraded bc (1.06-7 -> 1.06-8)
[2011-12-24 23:47] upgraded binutils (2.21-8 -> 2.22-2)
[2011-12-24 23:47] upgraded bison (2.4.3-1 -> 2.5-3)
[2011-12-24 23:47] upgraded blas (3.3.0-2 -> 3.3.1-2)
[2011-12-24 23:47] upgraded cabextract (1.3-1 -> 1.4-2)
[2011-12-24 23:47] upgraded isl (0.06-1 -> 0.07-1)
[2011-12-24 23:47] upgraded gmp (5.0.2-1 -> 5.0.2-3)
[2011-12-24 23:47] upgraded cloog (0.16.2-1 -> 0.16.3-1)
[2011-12-24 23:47] upgraded clucene (0.9.21b-1 -> 2.3.3.4-2)
[2011-12-24 23:47] upgraded cracklib (2.8.18-1 -> 2.8.18-2)
[2011-12-24 23:47] upgraded libgssglue (0.1-4 -> 0.3-1)
[2011-12-24 23:47] upgraded libtirpc (0.2.2-1 -> 0.2.2-2)
[2011-12-24 23:47] upgraded pam (1.1.3-1 -> 1.1.5-1)
[2011-12-24 23:47] upgraded polkit (0.101-2 -> 0.103-1)
[2011-12-24 23:47] upgraded consolekit (0.4.4-1 -> 0.4.5-1)
[2011-12-24 23:47] upgraded device-mapper (2.02.85-1 -> 2.02.88-1)
[2011-12-24 23:47] upgraded popt (1.16-3 -> 1.16-4)
[2011-12-24 23:47] upgraded cryptsetup (1.3.0-1 -> 1.4.0-2)
[2011-12-24 23:47] installed nettle (2.4-1)
[2011-12-24 23:47] installed p11-kit (0.9-1)
[2011-12-24 23:47] upgraded gnutls (2.12.5-1 -> 3.0.9-1)
[2011-12-24 23:47] upgraded keyutils (1.4-1 -> 1.5.5-1)
[2011-12-24 23:47] upgraded krb5 (1.9.1-1 -> 1.9.2-2)
[2011-12-24 23:47] upgraded libcups (1.4.6-2 -> 1.5.0-1)
[2011-12-24 23:47] upgraded openjpeg (1.3-3 -> 1.4-1)
[2011-12-24 23:47] upgraded poppler-data (0.4.4-1 -> 0.4.5-1)
[2011-12-24 23:47] upgraded poppler (0.16.5-1 -> 0.18.2-1)
[2011-12-24 23:47] upgraded libusb (1.0.8-1 -> 1.0.8-2)
[2011-12-24 23:47] upgraded libusb-compat (0.1.3-1 -> 0.1.3-2)
[2011-12-24 23:47] daemon script has been renamed to /etc/rc.d/cupsd
[2011-12-24 23:47] change your entry in  /etc/rc.conf
[2011-12-24 23:47] upgraded cups (1.4.6-2 -> 1.5.0-1)
[2011-12-24 23:47] upgraded ghostscript (9.02-2 -> 9.04-5)
[2011-12-24 23:47] upgraded cups-pdf (2.5.1-1 -> 2.6.1-1)
[2011-12-24 23:47] upgraded libssh2 (1.2.7-2 -> 1.3.0-1)
[2011-12-24 23:47] upgraded curl (7.21.6-2 -> 7.23.1-2)
[2011-12-24 23:47] installed cyrus-sasl-gssapi (2.1.23-8)
[2011-12-24 23:47] upgraded postgresql-libs (9.0.4-3 -> 9.1.2-1)
[2011-12-24 23:47] installed cyrus-sasl-sql (2.1.23-8)
[2011-12-24 23:47] upgraded dash (0.5.6.1-2 -> 0.5.7-2)
[2011-12-24 23:47] upgraded dhcpcd (5.2.12-1 -> 5.2.12-4)
[2011-12-24 23:47] upgraded libksba (1.0.8-1 -> 1.2.0-1)
[2011-12-24 23:47] upgraded libassuan (2.0.1-1 -> 2.0.2-1)
[2011-12-24 23:48] upgraded pth (2.0.7-3 -> 2.0.7-4)
[2011-12-24 23:48] upgraded dirmngr (1.1.0-1 -> 1.1.0-3)
[2011-12-24 23:48] upgraded dri2proto (2.3-1 -> 2.6-1)
[2011-12-24 23:48] upgraded eject (2.1.5-5 -> 2.1.5-7)
[2011-12-24 23:48] upgraded enca (1.13-1 -> 1.13-2)
[2011-12-24 23:48] installed hspell (1.1-1)
[2011-12-24 23:48] upgraded enchant (1.6.0-1 -> 1.6.0-4)
[2011-12-24 23:48] upgraded poppler-glib (0.16.5-1 -> 0.18.2-1)
[2011-12-24 23:48] upgraded libdatrie (0.2.4-1 -> 0.2.5-1)
[2011-12-24 23:48] upgraded libthai (0.1.15-1 -> 0.1.16-1)
[2011-12-24 23:48] upgraded pango (1.28.4-2 -> 1.29.4-1)
[2011-12-24 23:48] upgraded libxcursor (1.1.11-1 -> 1.1.12-1)
[2011-12-24 23:48] upgraded gdk-pixbuf2 (2.23.3-1 -> 2.24.1-1)
[2011-12-24 23:48] upgraded gtk-update-icon-cache (2.24.4-2 -> 2.24.8-2)
[2011-12-24 23:48] upgraded gtk2 (2.24.4-2 -> 2.24.8-2)
[2011-12-24 23:48] gtk-update-icon-cache: Failed to write cache file: Input/output error
[2011-12-24 23:48] upgraded epdfview (0.1.7-8 -> 0.1.8-3)
[2011-12-24 23:48] upgraded eventlog (0.2.12-2 -> 0.2.12-3)
[2011-12-24 23:48] upgraded exiv2 (0.21.1-1 -> 0.22-1)
[2011-12-24 23:48] upgraded libxfce4util (4.8.1-2 -> 4.8.2-1)
[2011-12-24 23:49] gtk-update-icon-cache: Failed to write cache file: Input/output error
[2011-12-24 23:49] upgraded exo (0.6.1-1 -> 0.6.2-3)
[2011-12-24 23:49] upgraded libmp4v2 (1.9.1-1 -> 1.9.1-2)
[2011-12-24 23:49] upgraded faac (1.28-2 -> 1.28-3)
[2011-12-24 23:49] upgraded fakeroot (1.15.1-1 -> 1.18.2-1)
[2011-12-24 23:49] upgraded gstreamer0.10 (0.10.34-1 -> 0.10.35-1)
[2011-12-24 23:49] upgraded libnice (0.1.0-1 -> 0.1.1-1)
[2011-12-24 23:49] upgraded gstreamer0.10-base (0.10.34-1 -> 0.10.35-1)
[2011-12-24 23:49] upgraded libogg (1.2.2-1 -> 1.3.0-1)
[2011-12-24 23:49] upgraded libtheora (1.1.1-1 -> 1.1.1-2)
[2011-12-24 23:49] upgraded gstreamer0.10-base-plugins (0.10.34-1 -> 0.10.35-1)
[2011-12-24 23:49] upgraded gstreamer0.10-good (0.10.29-1 -> 0.10.30-1)
[2011-12-24 23:49] upgraded gstreamer0.10-bad (0.10.22-1 -> 0.10.22-3)
[2011-12-24 23:49] installed pygobject2-devel (2.28.6-4)
[2011-12-24 23:49] upgraded libffi (3.0.9-1 -> 3.0.10-1)
[2011-12-24 23:50] upgraded python2 (2.7.1-9 -> 2.7.2-4)
[2011-12-24 23:50] installed python2-gobject2 (2.28.6-4)
[2011-12-24 23:50] upgraded farsight2 (0.0.28-2 -> 0.0.31-1)
[2011-12-24 23:50] upgraded lame (3.98.4-1 -> 3.99.3-1)
[2011-12-24 23:50] upgraded xcb-util (0.3.6-1 -> 0.3.8-1)
[2011-12-24 23:50] upgraded flac (1.2.1-2 -> 1.2.1-3)
[2011-12-24 23:50] upgraded libsndfile (1.0.24-1 -> 1.0.25-1)
[2011-12-24 23:50] installed json-c (0.9-1)
[2011-12-24 23:50] upgraded libpulse (0.9.22-2 -> 1.1-1)
[2011-12-24 23:50] Starting with libva version 1.0.15, the intel back-end is now in libva-driver-intel.
[2011-12-24 23:50] upgraded libva (1.0.12-1 -> 1.0.15-1)
[2011-12-24 23:50] upgraded libvdpau (0.4.1-1 -> 0.4.1-2)
[2011-12-24 23:50] upgraded libvpx (0.9.6-2 -> 0.9.7.p1-1)
[2011-12-24 23:50] upgraded rtmpdump (2.3-3 -> 2.4-1)
[2011-12-24 23:50] upgraded speex (1.2rc1-1.1 -> 1.2rc1-2)
[2011-12-24 23:50] upgraded x264 (20110327-1 -> 20111030-1)
[2011-12-24 23:50] upgraded xvidcore (1.3.1-1 -> 1.3.2-1)
[2011-12-24 23:50] upgraded ffmpeg (20110330-2 -> 20111211-1)
[2011-12-24 23:50] upgraded fftw (3.2.2-2 -> 3.3-1)
[2011-12-24 23:50] upgraded file (5.07-3 -> 5.09-1)
[2011-12-24 23:50] upgraded flex (2.5.35-4 -> 2.5.35-5)
[2011-12-24 23:50] upgraded libsamplerate (0.1.7-2 -> 0.1.8-1)
[2011-12-24 23:50] upgraded jack (0.120.1-1 -> 0.121.3-5)
[2011-12-24 23:50] upgraded fluidsynth (1.1.3-2 -> 1.1.5-1)
[2011-12-24 23:51] upgraded foomatic-db (4.0.6_20101215-1 -> 1:4.0.7_20110707-1)
[2011-12-24 23:51] upgraded foomatic-filters (4.0.6_20101215-1 -> 1:4.0.7_20110707-1)
[2011-12-24 23:51] upgraded foomatic-db-engine (4.0.6_20101215-1 -> 1:4.0.7_20110707-1)
[2011-12-24 23:51] upgraded fribidi (0.19.2-1 -> 0.19.2-2)
[2011-12-24 23:51] upgraded fuse (2.8.5-1 -> 2.8.6-1)
[2011-12-24 23:51] upgraded fuseiso (20070708-2 -> 20070708-4)
[2011-12-24 23:51] upgraded garcon (0.1.7-1 -> 0.1.9-1)
[2011-12-24 23:51] upgraded mpfr (3.0.1-1 -> 3.1.0.p3-1)
[2011-12-24 23:51] upgraded libmpc (0.9-1 -> 0.9-2)
[2011-12-24 23:51] upgraded ppl (0.11.2-1 -> 0.11.2-2)
[2011-12-24 23:51] upgraded gcc (4.6.0-5 -> 4.6.2-3)
[2011-12-24 23:51] installed libgusb (0.1.3-1)
[2011-12-24 23:51] upgraded sysfsutils (2.1.0-6 -> 2.1.0-7)
[2011-12-24 23:51] upgraded v4l-utils (0.8.3-1 -> 0.8.5-1)
[2011-12-24 23:52] upgraded sane (1.0.22-2 -> 1.0.22-4)
[2011-12-24 23:52] installed shared-color-profiles (0.1.5-1)
[2011-12-24 23:52] installed colord (0.1.15-3)
[2011-12-24 23:52] warning: undefined reference to <schema id='org.gnome.desktop.default-applications.at'/>
[2011-12-24 23:53] upgraded gtk3 (3.0.9-2 -> 3.2.3-1)
[2011-12-24 23:53] upgraded gconf (2.32.3-1 -> 3.2.3-1)
[2011-12-24 23:53] upgraded gd (2.0.36RC1-3 -> 2.0.36RC1-4)
[2011-12-24 23:53] upgraded gdl (3.0.2-1 -> 3.2.0-1)
[2011-12-24 23:53] upgraded gegl (0.1.6-1 -> 0.1.8-1)
[2011-12-24 23:53] upgraded gettext (0.18.1.1-3 -> 0.18.1.1-4)
[2011-12-24 23:53] warning: undefined reference to <schema id='org.gnome.desktop.default-applications.at'/>
[2011-12-24 23:53] upgraded ghex (2.24.0-1 -> 3.0.0-1)
[2011-12-24 23:53] upgraded pygtk (2.24.0-1 -> 2.24.0-2)
[2011-12-24 23:53] upgraded libcroco (0.6.2-1 -> 0.6.3-1)
[2011-12-24 23:53] upgraded librsvg (2.34.0-1 -> 2.34.2-1)
[2011-12-24 23:54] gtk-update-icon-cache: Failed to write cache file: Input/output error
[2011-12-24 23:54] upgraded gimp (2.6.11-5 -> 2.6.11-7)
[2011-12-24 23:54] upgraded glproto (1.4.12-1 -> 1.4.14-1)
[2011-12-24 23:54] upgraded mesa (7.10.2-2 -> 7.11.2-1)
[2011-12-24 23:54] upgraded glew (1.5.8-1 -> 1.7.0-1)
[2011-12-24 23:54] upgraded gsettings-desktop-schemas (3.0.1-2 -> 3.2.0-1)
[2011-12-24 23:54] upgraded startup-notification (0.10-2 -> 0.12-2)
[2011-12-24 23:54] upgraded gnome-desktop (3.0.2-1 -> 3.2.1-1)
[2011-12-24 23:54] upgraded libgnome-keyring (3.0.1-1 -> 3.2.2-1)
[2011-12-24 23:54] upgraded parted (2.3-1 -> 3.0-4)
[2011-12-24 23:54] upgraded libatasmart (0.17-1 -> 0.18-1)
[2011-12-24 23:54] upgraded lsof (4.84-3 -> 4.85-1)
[2011-12-24 23:54] upgraded udisks (1.0.3-2 -> 1.0.4-1)
[2011-12-24 23:54] installed libgdu (3.0.2-2)
[2011-12-24 23:54] upgraded libnotify (0.7.3-1 -> 0.7.4-1)
[2011-12-24 23:54] upgraded gnome-disk-utility (3.0.0-2 -> 3.0.2-2)
[2011-12-24 23:54] upgraded icon-naming-utils (0.8.90-1 -> 0.8.90-2)
[2011-12-24 23:56] gtk-update-icon-cache: Failed to write cache file: Input/output error
[2011-12-24 23:56] upgraded gnome-icon-theme-symbolic (3.0.0-1 -> 3.2.1-1)
[2011-12-24 23:57] gtk-update-icon-cache: Failed to write cache file: Input/output error
[2011-12-24 23:57] upgraded gnome-icon-theme (3.0.0-1 -> 3.2.1.2-1)
[2011-12-24 23:57] upgraded talloc (2.0.5-1 -> 2.0.7-1)
[2011-12-24 23:57] upgraded smbclient (3.5.8-3 -> 3.6.1-1)
[2011-12-24 23:58] upgraded gnome-vfs (2.24.4-3 -> 2.24.4-6)
[2011-12-24 23:58] upgraded libgsf (1.14.21-1 -> 1.14.22-2)
[2011-12-24 23:58] upgraded goffice (0.8.15-1 -> 0.8.17-1)
[2011-12-24 23:59] upgraded gnumeric (1.10.15-2 -> 1.10.17-1)
[2011-12-24 23:59] upgraded gnupg (1.4.11-2 -> 1.4.11-3)
[2011-12-24 23:59] upgraded gzip (1.4-2 -> 1.4-4)
[2011-12-24 23:59] upgraded texinfo (4.13a-5 -> 4.13a-7)
[2011-12-24 23:59] upgraded pinentry (0.8.1-1 -> 0.8.1-3)
[2011-12-24 23:59] upgraded gnupg2 (2.0.17-1 -> 2.0.18-1)
[2011-12-24 23:59] upgraded gobject-introspection (0.10.8-1 -> 1.30.0-1)
[2011-12-24 23:59] upgraded gpgme (1.3.0-1 -> 1.3.1-1)
[2011-12-24 23:59] upgraded gpm (1.20.6-6 -> 1.20.6-7)
[2011-12-24 23:59] upgraded grantlee (0.1.8-1 -> 0.2.0-1)
[2011-12-24 23:59] upgraded grep (2.8-1 -> 2.10-1)
[2011-12-24 23:59] upgraded groff (1.21-1 -> 1.21-2)
[2011-12-24 23:59] warning: /boot/grub/menu.lst installed as /boot/grub/menu.lst.pacnew
[2011-12-24 23:59] upgraded grub (0.97-17 -> 0.97-21)
[2011-12-24 23:59] upgraded libdca (0.0.5-2 -> 0.0.5-3)
[2011-12-24 23:59] upgraded libdc1394 (2.1.3-1 -> 2.1.3-2)
[2011-12-24 23:59] upgraded neon (0.29.3-3 -> 0.29.6-2)
[2011-12-24 23:59] upgraded libmms (0.6-1 -> 0.6.2-1)
[2011-12-24 23:59] upgraded libmpcdec (1.2.6-2 -> 1.2.6-3)
[2011-12-24 23:59] upgraded mjpegtools (1.9.0-4 -> 2.0.0-1)
[2011-12-24 23:59] upgraded libdvdread (4.1.3-2 -> 4.2.0-1)
[2011-12-24 23:59] upgraded libdvdnav (4.1.3-2 -> 4.2.0-2)
[2011-12-24 23:59] upgraded libmodplug (0.8.8.1-1 -> 0.8.8.3-1)
[2011-12-24 23:59] upgraded raptor (2.0.2-1 -> 2.0.6-1)
[2011-12-24 23:59] upgraded ladspa (1.13-2 -> 1.13-3)
[2011-12-24 23:59] upgraded liblrdf (0.4.0-7 -> 0.4.0-9)
[2011-12-24 23:59] upgraded soundtouch (1.5.0-1 -> 1.6.0-1)
[2011-12-24 23:59] upgraded libass (0.9.11-1 -> 0.10.0-2)
[2011-12-24 23:59] upgraded gstreamer0.10-bad-plugins (0.10.22-1 -> 0.10.22-3)
[2011-12-24 23:59] upgraded gstreamer0.10-ffmpeg (0.10.11-1 -> 0.10.12-1)
[2011-12-24 23:59] upgraded libavc1394 (0.5.3-3 -> 0.5.4-1)
[2011-12-24 23:59] upgraded libiec61883 (1.2.0-2 -> 1.2.0-3)
[2011-12-24 23:59] upgraded libshout (2.2.2-3 -> 1:2.2.2-4)
[2011-12-24 23:59] upgraded taglib (1.7-1 -> 1.7-3)
[2011-12-24 23:59] upgraded libsoup (2.34.1-1 -> 2.36.1-1)
[2011-12-24 23:59] upgraded libsoup-gnome (2.34.1-1 -> 2.36.1-1)
[2011-12-24 23:59] upgraded gstreamer0.10-good-plugins (0.10.29-1 -> 0.10.30-1)
[2011-12-24 23:59] upgraded gstreamer0.10-ugly (0.10.18-1 -> 0.10.18-4)
[2011-12-24 23:59] upgraded libmpeg2 (0.5.1-1 -> 0.5.1-3)
[2011-12-24 23:59] upgraded gstreamer0.10-ugly-plugins (0.10.18-1 -> 0.10.18-4)
[2011-12-24 23:59] upgraded gtk (1.2.10-10 -> 1.2.10-11)
[2011-12-24 23:59] upgraded gtkglext (1.2.0-5 -> 1.2.0-6)
[2011-12-24 23:59] upgraded gtk-xfce-engine (2.8.1-1 -> 2.99.0-1)
[2011-12-24 23:59] upgraded xz (5.0.2-1 -> 5.0.3-1)
[2011-12-24 23:59] upgraded libarchive (2.8.4-2 -> 2.8.5-2)
[2011-12-24 23:59] installed dconf (0.10.0-1)
[2011-12-24 23:59] upgraded gvfs (1.8.2-1 -> 1.10.1-1)
[2011-12-24 23:59] upgraded heirloom-mailx (12.5-1 -> 12.5-3)
[2011-12-24 23:59] upgraded libnl (1.1-2 -> 1.1-3)
[2011-12-24 23:59] upgraded net-snmp (5.6.1-1 -> 5.7.1-1)
[2011-12-25 00:00] upgraded hplip (3.11.3-1 -> 3.11.10-2)
[2011-12-25 00:00] upgraded hyphen (2.7.1-2 -> 2.8.3-1)
[2011-12-25 00:00] upgraded iana-etc (2.30-1 -> 2.30-2)
[2011-12-25 00:00] upgraded imagemagick (6.6.9.8-1 -> 6.7.4.0-1)
[2011-12-25 00:00] upgraded imlib (1.9.15-9 -> 1.9.15-10)
[2011-12-25 00:00] upgraded imlib2 (1.4.4-1 -> 1.4.5-1)
[2011-12-25 00:00] installed iproute2 (2.6.39-2)
[2011-12-25 00:00] upgraded kbd (1.15.3-1 -> 1.15.3-2)
[2011-12-25 00:00] upgraded shadow (4.1.4.3-1 -> 4.1.4.3-5)
[2011-12-25 00:00] upgraded sysvinit (2.88-2 -> 2.88-3)
[2011-12-25 00:00] warning: /etc/rc.conf installed as /etc/rc.conf.pacnew
[2011-12-25 00:00] Blacklisting of modules is no longer supported in rc.conf,
[2011-12-25 00:00] please add blacklist entries to /etc/modprobe.d/ instead.
[2011-12-25 00:00] VERBOSE= in rc.conf no longer has any effect.
[2011-12-25 00:00] Please append 'quiet' to your kernel command line.
[2011-12-25 00:00] If using non-bash-compatible shell, please set LANG in /etc/locale.conf,
[2011-12-25 00:00] as LOCALE in /etc/rc.conf no longer works.
[2011-12-25 00:00] upgraded initscripts (2011.05.2-1 -> 2011.12.1-1)
[2011-12-25 00:00] upgraded iputils (20101006-1 -> 20101006-2)
[2011-12-25 00:00] upgraded iso-codes (3.14-1 -> 3.29-1)
[2011-12-25 00:00] upgraded jfsutils (1.1.14-2 -> 1.1.15-3)
[2011-12-25 00:00] upgraded libedit (20110227_3.0-1 -> 20110802_3.0-1)
[2011-12-25 00:00] warning: /etc/ssh/sshd_config installed as /etc/ssh/sshd_config.pacnew
[2011-12-25 00:00] upgraded openssh (5.8p2-8 -> 5.9p1-5)
[2011-12-25 00:00] upgraded kde-agent (20110602-1 -> 20110922-1)
[2011-12-25 00:00] upgraded strigi (git20110405-1 -> 0.7.7-1)
[2011-12-25 00:00] upgraded shared-desktop-ontologies (0.6.0-1 -> 0.8.1-1)
[2011-12-25 00:00] upgraded libdbusmenu-qt (0.8.2-1 -> 0.9.0-1)
[2011-12-25 00:00] upgraded polkit-qt (0.99.0-1 -> 0.103.0-1)
[2011-12-25 00:00] installed libqzeitgeist (0.8.0-1)
[2011-12-25 00:00] upgraded phonon (4.5.0-1 -> 1:4.6.0-1)
[2011-12-25 00:00] installed libplist (1.4-1)
[2011-12-25 00:00] installed usbmuxd (1.0.7-2)
[2011-12-25 00:00] installed libimobiledevice (1.1.1-2)
[2011-12-25 00:00] upgraded upower (0.9.10-1 -> 0.9.15-1)
[2011-12-25 00:00] installed gperf (3.0.4-4)
[2011-12-25 00:00] installed qtwebkit (2.2.1-1)
[2011-12-25 00:02] upgraded kdelibs (4.6.3-2 -> 4.7.4-2)
[2011-12-25 00:02] upgraded libssh (0.5.0-1 -> 0.5.2-1)
[2011-12-25 00:02] upgraded tar (1.26-1 -> 1.26-2)
[2011-12-25 00:02] upgraded libtool (2.4-3 -> 2.4.2-2)
[2011-12-25 00:02] upgraded libcanberra (0.28-1 -> 0.28-2)
[2011-12-25 00:02] upgraded oxygen-icons (4.6.5-1 -> 4.7.4-1)
[2011-12-25 00:02] upgraded xorg-xauth (1.0.5-2 -> 1.0.6-1)
[2011-12-25 00:03] upgraded kdebase-runtime (4.6.5-1 -> 4.7.4-1)
[2011-12-25 00:03] upgraded kdebase-lib (4.6.5-1 -> 4.7.4-1)
[2011-12-25 00:03] upgraded kdebase-dolphin (4.6.5-1 -> 4.7.4-1)
[2011-12-25 00:03] installed libdmtx (0.7.4-1)
[2011-12-25 00:03] installed qrencode (3.2.0-1)
[2011-12-25 00:03] installed prison (1.0-1)
[2011-12-25 00:03] upgraded kdepimlibs (4.6.3-1 -> 4.7.4-1)
[2011-12-25 00:03] upgraded kdepim-runtime (4.6.1-1 -> 4.7.4-1)
[2011-12-25 00:03] upgraded kdepim-libkdepim (4.6.1-1 -> 4.7.4-1)
[2011-12-25 00:03] upgraded kdepim-kalarm (4.6.1-1 -> 4.7.4-1)
[2011-12-25 00:03] upgraded kdeutils-kcalc (4.7.1-1 -> 4.7.4-1)
[2011-12-25 00:03] upgraded koffice-servicetypes (2.3.3-3 -> 2.3.3-11)
[2011-12-25 00:03] upgraded koffice-libs (2.3.3-3 -> 2.3.3-11)
[2011-12-25 00:03] upgraded koffice-kounavail (2.3.3-3 -> 2.3.3-11)
[2011-12-25 00:03] upgraded koffice-templates (2.3.3-3 -> 2.3.3-11)
[2011-12-25 00:04] upgraded koffice-pics (2.3.3-3 -> 2.3.3-11)
[2011-12-25 00:04] upgraded koffice-plugins (2.3.3-3 -> 2.3.3-11)
[2011-12-25 00:04] upgraded koffice-kword (2.3.3-3 -> 2.3.3-11)
[2011-12-25 00:04] upgraded krusader (2.4.0beta1-3 -> 2.4.0beta1-4)
[2011-12-25 00:04] upgraded lapack (3.3.0-2 -> 3.3.1-2)
[2011-12-25 00:04] upgraded less (443-1 -> 444-2)
[2011-12-25 00:04] upgraded lesstif (0.95.2-2 -> 0.95.2-4)
[2011-12-25 00:04] upgraded libcddb (1.3.2-2 -> 1.3.2-3)
[2011-12-25 00:04] upgraded libdlna (0.2.3-8 -> 0.2.3-10)
[2011-12-25 00:04] upgraded libdvbpsi (0.1.7-1 -> 0.2.2-1)
[2011-12-25 00:04] upgraded libdvdcss (1.2.10-2 -> 1.2.11-1)
[2011-12-25 00:04] upgraded libebml (1.2.0-1 -> 1.2.2-2)
[2011-12-25 00:04] upgraded libevent (2.0.11-1 -> 2.0.16-1)
[2011-12-25 00:04] upgraded libmatroska (1.1.0-1 -> 1.3.0-2)
[2011-12-25 00:04] upgraded libmtp (1.0.6-1 -> 1.1.1-1)
[2011-12-25 00:04] upgraded libpcap (1.1.1-2 -> 1.1.1-4)
[2011-12-25 00:04] upgraded libpipeline (1.2.0-1 -> 1.2.0-2)
[2011-12-25 00:04] upgraded libproxy (0.4.6-6 -> 0.4.7-1)
[2011-12-25 00:04] upgraded libpurple (2.7.11-3 -> 2.10.1-1)
[2011-12-25 00:04] upgraded libreoffice-en-US (3.4.3-2 -> 3.4.4-4)
[2011-12-25 00:05] upgraded libupnp (1.6.13-1 -> 1.6.14-1)
[2011-12-25 00:05] upgraded libwnck (2.30.6-2 -> 2.30.7-1)
[2011-12-25 00:05] upgraded xfconf (4.8.0-1 -> 4.8.1-1)
[2011-12-25 00:05] upgraded libxfce4ui (4.8.0-2 -> 4.8.1-1)
[2011-12-25 00:05] upgraded licenses (2.8-1 -> 2.9-1)
[2011-12-25 00:05] upgraded links (2.3-1 -> 2.4-1)
[2011-12-25 00:05] upgraded linux-firmware (20110512-2 -> 20111101-1)
[2011-12-25 00:05] upgraded lirc-utils (1:0.9.0-4 -> 1:0.9.0-8)
[2011-12-25 00:05] upgraded lm_sensors (3.3.0-3 -> 3.3.1-2)
[2011-12-25 00:05] upgraded logrotate (3.7.9-1 -> 3.8.1-1)
[2011-12-25 00:05] upgraded lua (5.1.4-6 -> 5.1.4-9)
[2011-12-25 00:05] upgraded lvm2 (2.02.85-1 -> 2.02.88-1)
[2011-12-25 00:05] upgraded lzo2 (2.05-1 -> 2.06-1)
[2011-12-25 00:05] upgraded make (3.81-5 -> 3.82-4)
[2011-12-25 00:05] upgraded man-db (2.6.0.2-1 -> 2.6.0.2-3)
[2011-12-25 00:06] upgraded man-pages (3.32-1 -> 3.35-1)
[2011-12-25 00:06] upgraded mcpp (2.7.2-2 -> 2.7.2-3)
[2011-12-25 00:06] upgraded mdadm (3.2.1-3 -> 3.2.2-4)
[2011-12-25 00:06] upgraded mime-types (1.0-3 -> 8-1)
[2011-12-25 00:06] upgraded mkinitcpio-busybox (1.18.2-1 -> 1.19.2-1)
[2011-12-25 00:06] upgraded mlocate (0.24-1 -> 0.24-2)
[2011-12-25 00:06] upgraded mozilla-common (1.4-1 -> 1.4-3)
[2011-12-25 00:06] upgraded mpg123 (1.13.3-1 -> 1.13.4-1)
[2011-12-25 00:06] installed libbluray (0.2.1-1)
[2011-12-25 00:06] upgraded mplayer (33805-1 -> 34426-1)
[2011-12-25 00:06] upgraded python2-numpy (1.5.1-2 -> 1.6.1-1)
[2011-12-25 00:06] upgraded protobuf (2.4.0a-1 -> 2.4.1-1)
[2011-12-25 00:06] upgraded protobuf-python (2.4.0a-1 -> 2.4.1-1)
[2011-12-25 00:06] Unknown media type in type 'all/all'
[2011-12-25 00:06] Unknown media type in type 'all/allfiles'
[2011-12-25 00:06] Unknown media type in type 'uri/mms'
[2011-12-25 00:06] Unknown media type in type 'uri/mmst'
[2011-12-25 00:06] Unknown media type in type 'uri/mmsu'
[2011-12-25 00:06] Unknown media type in type 'uri/pnm'
[2011-12-25 00:06] Unknown media type in type 'uri/rtspt'
[2011-12-25 00:06] Unknown media type in type 'uri/rtspu'
[2011-12-25 00:06] Unknown media type in type 'interface/x-winamp-skin'
[2011-12-25 00:07] upgraded mypaint (0.9.1-2 -> 1.0.0-1)
[2011-12-25 00:07] upgraded nano (2.2.6-1 -> 2.2.6-2)
[2011-12-25 00:07] installed libtracker-sparql (0.12.9-1)
[2011-12-25 00:07] upgraded nautilus (3.0.2-1 -> 3.2.1-1)
[2011-12-25 00:07] upgraded nestopia (1.40h-3 -> 1.40h-4)
[2011-12-25 00:07] hostname and {,yp,nis}domainname has moved:
[2011-12-25 00:07] ----------
[2011-12-25 00:07] hostname is now in coreutils
[2011-12-25 00:07] domainname is now in yp-tools
[2011-12-25 00:07] their functionality might have changed slightly
[2011-12-25 00:07] 
[2011-12-25 00:07] dnsdomainname remains in net-tools
[2011-12-25 00:07] ----------
[2011-12-25 00:07] upgraded net-tools (1.60-14 -> 1.60.20110819cvs-3)
[2011-12-25 00:07] warning: /etc/ntp.conf installed as /etc/ntp.conf.pacnew
[2011-12-25 00:07] 
[2011-12-25 00:07] ==> The file /etc/conf.d/ntp-client.conf has been renamed /etc/conf.d/ntpd.conf
[2011-12-25 00:07] ==> If you made changes to the former, please update the latter.
[2011-12-25 00:07] 
[2011-12-25 00:07] upgraded ntp (4.2.6.p3-3 -> 4.2.6.p4-2)
[2011-12-25 00:07] upgraded ogle (0.9.2-12 -> 0.9.2-13)
[2011-12-25 00:07] upgraded opera (11.10-1 -> 11.60-1)
[2011-12-25 00:07] warning: /etc/pacman.d/mirrorlist installed as /etc/pacman.d/mirrorlist.pacnew
[2011-12-25 00:07] upgraded pacman-mirrorlist (20110324-1 -> 20111026-1)
[2011-12-25 00:07] upgraded patch (2.6.1-2 -> 2.6.1-3)
[2011-12-25 00:07] upgraded pcmciautils (017-2 -> 018-1)
[2011-12-25 00:07] upgraded t1lib (5.1.2-2 -> 5.1.2-3)
[2011-12-25 00:07] upgraded pdfedit (0.4.5-1 -> 0.4.5-2)
[2011-12-25 00:07] upgraded perl-html-parser (3.68-1 -> 3.68-2)
[2011-12-25 00:07] installed perl-encode-locale (1.02-1)
[2011-12-25 00:07] installed perl-http-date (6.00-1)
[2011-12-25 00:07] installed perl-file-listing (6.03-1)
[2011-12-25 00:07] installed perl-lwp-mediatypes (6.01-1)
[2011-12-25 00:07] upgraded perl-uri (1.58-1 -> 1.59-1)
[2011-12-25 00:08] installed perl-http-message (6.02-1)
[2011-12-25 00:08] installed perl-http-cookies (6.00-1)
[2011-12-25 00:08] installed perl-http-daemon (6.00-1)
[2011-12-25 00:08] installed perl-http-negotiate (6.00-1)
[2011-12-25 00:08] installed perl-net-http (6.01-1)
[2011-12-25 00:08] installed perl-www-robotrules (6.01-1)
[2011-12-25 00:08] upgraded perl-libwww (5.837-1 -> 6.02-2)
[2011-12-25 00:08] upgraded perl-time-hires (1.9721-3 -> 1.9724-2)
[2011-12-25 00:08] upgraded perl-xml-parser (2.40-2 -> 2.41-1)
[2011-12-25 00:08] upgraded pidgin (2.7.11-3 -> 2.10.1-1)
[2011-12-25 00:08] upgraded pkg-config (0.25-3 -> 0.26-2)
[2011-12-25 00:08] upgraded pm-quirks (0.20100619-1 -> 0.20100619-2)
[2011-12-25 00:08] upgraded ppp (2.4.5-2 -> 2.4.5-3)
[2011-12-25 00:08] upgraded procps (3.2.8-3 -> 3.2.8-4)
[2011-12-25 00:08] upgraded psutils (1.17-2 -> 1.17-3)
[2011-12-25 00:08] upgraded pygobject-devel (2.28.4-1 -> 3.0.3-1)
[2011-12-25 00:09] upgraded wine (1.3.20-1 -> 1.3.35-3)
[2011-12-25 00:09] upgraded which (2.20-4 -> 2.20-5)
[2011-12-25 00:09] upgraded q4wine (0.120_r1-1 -> 0.121-2)
[2011-12-25 00:09] upgraded raptor1 (1.4.21-3 -> 1.4.21-4)
[2011-12-25 00:09] upgraded rasqal (1:0.9.21-1 -> 1:0.9.28-1)
[2011-12-25 00:09] upgraded redland (1:1.0.12-1 -> 1:1.0.15-2)
[2011-12-25 00:09] upgraded redland-storage-virtuoso (1:1.0.12-1 -> 1:1.0.15-2)
[2011-12-25 00:09] upgraded reiserfsprogs (3.6.21-3 -> 3.6.21-4)
[2011-12-25 00:09] upgraded tcl (8.5.9-1 -> 8.5.11-1)
[2011-12-25 00:09] upgraded tk (8.5.9-1 -> 8.5.11-1)
[2011-12-25 00:09] upgraded remind (3.01.10-1 -> 3.01.10-2)
[2011-12-25 00:09] upgraded rpcbind (0.2.0-3 -> 0.2.0-5)
[2011-12-25 00:09] >>> The kernel-mode plugin has a new place.
[2011-12-25 00:09] >>> It's now located under /usr/lib/rp-pppoe/rp-pppoe.so
[2011-12-25 00:09] >>> Change LINUX_PLUGIN to the new path in your /etc/ppp/pppoe.conf
[2011-12-25 00:09] upgraded rp-pppoe (3.10-6 -> 3.10-7)
[2011-12-25 00:09] 
[2011-12-25 00:09] ***************************************************************
[2011-12-25 00:09]  SDLMAME has been updated. If you are upgrading directly from
[2011-12-25 00:09]  0.117 or earlier, you must delete all .cfg files and
[2011-12-25 00:09]  re-configure your controllers. You should also run
[2011-12-25 00:09]  'SDLMAME --newini' to force the script to create a new ini
[2011-12-25 00:09]  file with default settings at ~/.mame/sdlmame.ini
[2011-12-25 00:09]  since there may be new ini options.
[2011-12-25 00:09] ***************************************************************
[2011-12-25 00:09] 
[2011-12-25 00:09] upgraded sdlmame (0.143u5-1 -> 0.144.u3-1)
[2011-12-25 00:09] upgraded snes9x (1.53-1 -> 1.53-2)
[2011-12-25 00:09] upgraded sudo (1.8.1.p1-1 -> 1.8.3.p1-1)
[2011-12-25 00:09] upgraded syslog-ng (3.2.4-1 -> 3.3.3-1)
[2011-12-25 00:09] upgraded vte-common (0.28.0-1 -> 0.30.1-2)
[2011-12-25 00:09] upgraded vte (0.28.0-1 -> 0.28.2-3)
[2011-12-25 00:10] upgraded terminal (0.4.7-2 -> 0.4.8-1)
[2011-12-25 00:10] gtk-update-icon-cache: Failed to write cache file: Input/output error
[2011-12-25 00:10] upgraded thunar (1.2.1-2 -> 1.2.3-3)
[2011-12-25 00:10] upgraded transmission-qt (2.31-1 -> 2.42-1)
[2011-12-25 00:10] installed python2-zope-interface (3.8.0-1)
[2011-12-25 00:10] upgraded twisted (10.2.0-3 -> 11.1.0-1)
[2011-12-25 00:10] upgraded tzdata (2011g-1 -> 2011n-1)
[2011-12-25 00:10] upgraded usbutils (002-3 -> 004-1)
[2011-12-25 00:10] warning: /etc/conf.d/ushare installed as /etc/conf.d/ushare.pacnew
[2011-12-25 00:10] upgraded ushare (1.1a-10 -> 1.1a-16)
[2011-12-25 00:11] upgraded vi (1:050325-1 -> 1:050325-2)
[2011-12-25 00:11] upgraded virtuoso (6.1.3-1 -> 6.1.4-1)
[2011-12-25 00:11] installed xcb-util-keysyms (0.3.8-1)
[2011-12-25 00:11] upgraded vlc (1.1.9-1 -> 1.1.13-1)
[2011-12-25 00:11] upgraded winetricks (20110629-1 -> 20111115-3)
[2011-12-25 00:12] upgraded wireshark-cli (1.6.1-1 -> 1.6.4-1)
[2011-12-25 00:12] gtk-update-icon-cache: Failed to write cache file: Input/output error
[2011-12-25 00:12] upgraded wireshark-gtk (1.6.1-1 -> 1.6.4-1)
[2011-12-25 00:12] upgraded wpa_supplicant (0.7.3-3 -> 0.7.3-4)
[2011-12-25 00:12] upgraded xf86dgaproto (2.1-1 -> 2.1-2)
[2011-12-25 00:12] upgraded xf86-video-nouveau (0.0.16_git20110316-2 -> 0.0.16_git20110829-1)
[2011-12-25 00:12] upgraded xfce4-notifyd (0.2.1-1 -> 0.2.2-2)
[2011-12-25 00:13] gtk-update-icon-cache: Failed to write cache file: Input/output error
[2011-12-25 00:13] upgraded xfce4-panel (4.8.3-1 -> 4.8.6-1)
[2011-12-25 00:13] upgraded xfce4-sensors-plugin (1.2.1-1 -> 1.2.3-2)
[2011-12-25 00:13] upgraded xorg-iceauth (1.0.4-2 -> 1.0.5-1)
[2011-12-25 00:13] gtk-update-icon-cache: Failed to write cache file: Input/output error
[2011-12-25 00:13] upgraded xfce4-session (4.8.1-2 -> 4.8.2-2)
[2011-12-25 00:13] upgraded xfce4-settings (4.8.2-1 -> 4.8.3-2)
[2011-12-25 00:13] upgraded xfce4-weather-plugin (0.7.4-1 -> 0.7.4-2)
[2011-12-25 00:13] installed inetutils (1.8-6)
[2011-12-25 00:13] upgraded xorg-xinit (1.3.0-3 -> 1.3.1-2)
[2011-12-25 00:13] upgraded xfce-utils (4.8.1-1 -> 4.8.3-1)
[2011-12-25 00:13] gtk-update-icon-cache: Failed to write cache file: Input/output error
[2011-12-25 00:13] upgraded xfdesktop (4.8.2-1 -> 4.8.3-1)
[2011-12-25 00:13] upgraded xfsprogs (3.1.5-1 -> 3.1.7-1)
[2011-12-25 00:13] upgraded xfwm4 (4.8.1-1 -> 4.8.3-1)
[2011-12-25 00:14] upgraded xfwm4-themes (4.6.0-1 -> 4.6.0-2)
[2011-12-25 00:14] upgraded xine-lib (1.1.19-2 -> 1.1.20-1)
[2011-12-25 00:14] upgraded xlockmore (5.33-2 -> 5.35-1)
[2011-12-25 00:14] upgraded xmms (1.2.11-3 -> 1.2.11-4)
[2011-12-25 00:14] upgraded xorg-fonts-alias (1.0.2-1 -> 1.0.2-2)
[2011-12-25 00:14] upgraded xorg-mkfontscale (1.0.8-1 -> 1.0.9-1)
[2011-12-25 00:14] upgraded xorg-sessreg (1.0.6-2 -> 1.0.7-1)
[2011-12-25 00:14] upgraded xorg-twm (1.0.6-2 -> 1.0.7-1)
[2011-12-25 00:14] upgraded xorg-xdpyinfo (1.2.0-2 -> 1.3.0-1)
[2011-12-25 00:14] upgraded xorg-xlsclients (1.1.1-2 -> 1.1.2-1)
[2011-12-25 00:14] upgraded xorg-xprop (1.2.0-2 -> 1.2.1-1)
[2011-12-25 00:14] upgraded xorg-xrandr (1.3.4-2 -> 1.3.5-1)
[2011-12-25 00:14] upgraded xorg-xwininfo (1.1.1-2 -> 1.1.2-1)
[2011-12-25 00:14] upgraded xterm (269-1 -> 276-1)
[2011-12-25 00:18] Running 'pacman -Suy'
[2011-12-25 00:18] synchronizing package lists
[2011-12-25 00:18] starting full system upgrade
[2007-01-09 20:40] Running 'pacman -Sy nvidia'
[2007-01-09 20:40] synchronizing package lists
[2007-01-09 20:40] WARNING: Can't read module /lib/modules/3.1.5-1-ARCH/kernel/drivers/block/rbd.ko.gz: Exec format error
[2007-01-09 20:40] WARNING: Can't read module /lib/modules/3.1.5-1-ARCH/kernel/drivers/block/floppy.ko.gz: Exec format error
[2007-01-09 20:40] WARNING: Can't read module /lib/modules/3.1.5-1-ARCH/kernel/drivers/power/test_power.ko.gz: Exec format error
[2007-01-09 20:40] WARNING: Can't read module /lib/modules/3.1.5-1-ARCH/kernel/drivers/power/olpc_battery.ko.gz: Success
[2007-01-09 20:40] WARNING: Can't read module /lib/modules/3.1.5-1-ARCH/kernel/drivers/power/wm831x_power.ko.gz: Exec format error
[2007-01-09 20:40] WARNING: Can't read module /lib/modules/3.1.5-1-ARCH/kernel/drivers/power/ds2782_battery.ko.gz: Exec format error
[2007-01-09 20:40] WARNING: Can't read module /lib/modules/3.1.5-1-ARCH/kernel/drivers/power/pcf50633-charger.ko.gz: Exec format error
[2007-01-09 20:40] WARNING: Can't read module /lib/modules/3.1.5-1-ARCH/kernel/drivers/power/max17042_battery.ko.gz: Success
[2007-01-09 20:40] WARNING: Can't read module /lib/modules/3.1.5-1-ARCH/kernel/drivers/power/max8903_charger.ko.gz: Success
[2007-01-09 20:40] WARNING: Can't read module /lib/modules/3.1.5-1-ARCH/kernel/drivers/power/gpio-charger.ko.gz: Success
[2007-01-09 20:40] WARNING: Can't read module /lib/modules/3.1.5-1-ARCH/kernel/drivers/power/bq20z75.ko.gz: Success
[2007-01-09 20:40] WARNING: Can't read module /lib/modules/3.1.5-1-ARCH/kernel/drivers/power/ds2760_battery.ko.gz: Exec format error
[2007-01-09 20:40] WARNING: Can't read module /lib/modules/3.1.5-1-ARCH/kernel/drivers/power/max17040_battery.ko.gz: Success
[2007-01-09 20:40] WARNING: Can't read module /lib/modules/3.1.5-1-ARCH/kernel/drivers/power/pda_power.ko.gz: Exec format error
[2007-01-09 20:40] WARNING: Can't read module /lib/modules/3.1.5-1-ARCH/kernel/drivers/power/wm831x_backup.ko.gz: Success
[2007-01-09 20:40] WARNING: Can't read module /lib/modules/3.1.5-1-ARCH/kernel/drivers/power/isp1704_charger.ko.gz: Success
[2007-01-09 20:40] WARNING: Can't read module /lib/modules/3.1.5-1-ARCH/kernel/drivers/hid/hid-tmff.ko.gz: Exec format error
[2007-01-09 20:40] WARNING: Can't read module /lib/modules/3.1.5-1-ARCH/kernel/drivers/hid/hid-apple.ko.gz: Success
[2007-01-09 20:40] WARNING: Can't read module /lib/modules/3.1.5-1-ARCH/kernel/drivers/hid/hid-chicony.ko.gz: Exec format error
[2007-01-09 20:40] WARNING: Can't read module /lib/modules/3.1.5-1-ARCH/kernel/drivers/hid/hid-sony.ko.gz: Exec format error
[2007-01-09 20:40] WARNING: Can't read module /lib/modules/3.1.5-1-ARCH/kernel/drivers/hid/hid-wacom.ko.gz: Success
[2007-01-09 20:40] WARNING: Can't read module /lib/modules/3.1.5-1-ARCH/kernel/drivers/hid/hid-zpff.ko.gz: Exec format error
[2007-01-09 20:40] WARNING: Can't read module /lib/modules/3.1.5-1-ARCH/kernel/drivers/hid/hid-speedlink.ko.gz: Exec format error
[2007-01-09 20:40] WARNING: Can't read module /lib/modules/3.1.5-1-ARCH/kernel/drivers/hid/hid-roccat-koneplus.ko.gz: Exec format error
[2007-01-09 20:40] WARNING: Can't read module /lib/modules/3.1.5-1-ARCH/kernel/drivers/hid/hid-a4tech.ko.gz: Exec format error
[2007-01-09 20:40] WARNING: Can't read module /lib/modules/3.1.5-1-ARCH/kernel/drivers/hid/hid-roccat-pyra.ko.gz: Exec format error
[2007-01-09 20:40] WARNING: Can't read module /lib/modules/3.1.5-1-ARCH/kernel/drivers/hid/hid-belkin.ko.gz: Exec format error
[2007-01-09 20:40] WARNING: Can't read module /lib/modules/3.1.5-1-ARCH/kernel/drivers/hid/hid-roccat-kone.ko.gz: Success
[2007-01-09 20:40] WARNING: Can't read module /lib/modules/3.1.5-1-ARCH/kernel/drivers/hid/hid-ortek.ko.gz: Success
[2007-01-09 20:40] WARNING: Can't read module /lib/modules/3.1.5-1-ARCH/kernel/drivers/hid/hid.ko.gz: Exec format error
[2007-01-09 20:40] WARNING: Can't read module /lib/modules/3.1.5-1-ARCH/kernel/drivers/hid/hid-microsoft.ko.gz: Exec format error
[2007-01-09 20:40] WARNING: Can't read module /lib/modules/3.1.5-1-ARCH/kernel/drivers/hid/hid-petalynx.ko.gz: Success
[2007-01-09 20:40] WARNING: Can't read module /lib/modules/3.1.5-1-ARCH/kernel/drivers/hid/hid-kensington.ko.gz: Exec format error
[2007-01-09 20:40] WARNING: Can't read module /lib/modules/3.1.5-1-ARCH/kernel/drivers/hid/hid-axff.ko.gz: Exec format error
[2007-01-09 20:40] WARNING: Can't read module /lib/modules/3.1.5-1-ARCH/kernel/drivers/hid/hid-samsung.ko.gz: Exec format error
[2007-01-09 20:40] WARNING: Can't read module /lib/modules/3.1.5-1-ARCH/kernel/drivers/hid/hid-elecom.ko.gz: Exec format error
[2007-01-09 20:40] WARNING: Can't read module /lib/modules/3.1.5-1-ARCH/kernel/drivers/hid/hid-ntrig.ko.gz: Exec format error
[2007-01-09 20:40] WARNING: Can't read module /lib/modules/3.1.5-1-ARCH/kernel/drivers/hid/hid-prodikeys.ko.gz: Exec format error
[2007-01-09 20:40] WARNING: Can't read module /lib/modules/3.1.5-1-ARCH/kernel/drivers/hid/hid-gyration.ko.gz: Exec format error
[2007-01-09 20:40] WARNING: Can't read module /lib/modules/3.1.5-1-ARCH/kernel/drivers/hid/hid-monterey.ko.gz: Exec format error
[2007-01-09 20:40] WARNING: Can't read module /lib/modules/3.1.5-1-ARCH/kernel/drivers/hid/hid-sunplus.ko.gz: Success
[2007-01-09 20:40] WARNING: Can't read module /lib/modules/3.1.5-1-ARCH/kernel/drivers/hid/hid-roccat.ko.gz: Exec format error
[2007-01-09 20:40] WARNING: Can't read module /lib/modules/3.1.5-1-ARCH/kernel/drivers/hid/hid-pl.ko.gz: Success
[2007-01-09 20:40] WARNING: Can't read module /lib/modules/3.1.5-1-ARCH/kernel/drivers/hid/hid-dr.ko.gz: Exec format error
[2007-01-09 20:40] WARNING: Can't read module /lib/modules/3.1.5-1-ARCH/kernel/drivers/hid/hid-holtekff.ko.gz: Success
[2007-01-09 20:40] WARNING: Can't read module /lib/modules/3.1.5-1-ARCH/kernel/drivers/hid/hid-wiimote.ko.gz: Success
[2007-01-09 20:40] WARNING: Can't read module /lib/modules/3.1.5-1-ARCH/kernel/drivers/hid/hid-roccat-arvo.ko.gz: Exec format error
[2007-01-09 20:40] WARNING: Can't read module /lib/modules/3.1.5-1-ARCH/kernel/drivers/hid/hid-sjoy.ko.gz: Exec format error
[2007-01-09 20:40] WARNING: Can't read module /lib/modules/3.1.5-1-ARCH/kernel/drivers/hid/hid-emsff.ko.gz: Success
[2007-01-09 20:40] WARNING: Can't read module /lib/modules/3.1.5-1-ARCH/kernel/drivers/hid/hid-keytouch.ko.gz: Exec format error
[2007-01-09 20:40] WARNING: Can't read module /lib/modules/3.1.5-1-ARCH/kernel/drivers/hid/hid-multitouch.ko.gz: Exec format error
[2007-01-09 20:40] WARNING: Can't read module /lib/modules/3.1.5-1-ARCH/kernel/drivers/hid/hid-uclogic.ko.gz: Success
[2007-01-09 20:40] WARNING: Can't read module /lib/modules/3.1.5-1-ARCH/kernel/drivers/hid/hid-topseed.ko.gz: Success
[2007-01-09 20:40] WARNING: Can't read module /lib/modules/3.1.5-1-ARCH/kernel/drivers/hid/hid-roccat-kovaplus.ko.gz: Exec format error
[2007-01-09 20:40] WARNING: Can't read module /lib/modules/3.1.5-1-ARCH/kernel/drivers/hid/hid-twinhan.ko.gz: Success
[2007-01-09 20:40] WARNING: Can't read module /lib/modules/3.1.5-1-ARCH/kernel/drivers/hid/hid-kye.ko.gz: Success
[2007-01-09 20:40] In order to use nvidia module, reboot the system.
[2007-01-09 20:40] installed nvidia (290.10-1)
[2007-01-09 20:43] Running 'pacman -R flashplugin'
[2007-01-09 20:43] removed flashplugin (11.1.102.55-1)
[2007-01-09 20:43] Running 'pacman -R chromium'
[2007-01-09 20:43] Running 'pacman -R chromium'
[2007-01-09 20:44] removed chromium (16.0.912.63-1)
[2011-12-25 01:20] Running 'pacman -Sy chromium'
[2011-12-25 01:20] synchronizing package lists
[2011-12-25 01:21] installed chromium (16.0.912.63-1)
[2011-12-25 01:24] Running 'pacman -Sy flashplugin'
[2011-12-25 01:24] synchronizing package lists
[2011-12-25 01:25]  >> 
[2011-12-25 01:25]  >> If you have an NVIDIA card that supports libvdpau or Broadcom Crystal HD chips,
[2011-12-25 01:25]  >> uncomment EnableLinuxHWVideoDecode=1 from /etc/adobe/mms.cfg.
[2011-12-25 01:25]  >> If you run into problems, please contact nVidia or Broadcom along with your system config info / driver version.
[2011-12-25 01:25]  >> 
[2011-12-25 01:25] installed flashplugin (11.1.102.55-1)
[2011-12-27 17:04] Running 'pacman -R thunderbird'
[2011-12-27 17:04] removed thunderbird (9.0.1-1)
[2011-12-27 17:05] Running 'pacman -Sy thunderbird'
[2011-12-27 17:05] synchronizing package lists
[2011-12-27 17:06] gtk-update-icon-cache: Failed to write cache file: Input/output error
[2011-12-27 17:06] installed thunderbird (9.0.1-1)
[2011-12-28 02:48] Running 'pacman -Suyy'
[2011-12-28 02:48] synchronizing package lists
[2011-12-28 02:48] starting full system upgrade
[2011-12-28 03:00] upgraded attica (0.2.9-1 -> 0.3.0-1)
[2011-12-28 03:00] upgraded kdelibs (4.7.4-2 -> 4.7.4-3)
[2011-12-28 03:01] upgraded kdebase-runtime (4.7.4-1 -> 4.7.4-2)
[2011-12-28 03:01] warning: /etc/ntp.conf installed as /etc/ntp.conf.pacnew
[2011-12-28 03:01] upgraded ntp (4.2.6.p4-2 -> 4.2.6.p5-1)
[2011-12-28 03:01] 
[2011-12-28 03:01] ***************************************************************
[2011-12-28 03:01]  SDLMAME has been updated. If you are upgrading directly from
[2011-12-28 03:01]  0.117 or earlier, you must delete all .cfg files and
[2011-12-28 03:01]  re-configure your controllers. You should also run
[2011-12-28 03:01]  'SDLMAME --newini' to force the script to create a new ini
[2011-12-28 03:01]  file with default settings at ~/.mame/sdlmame.ini
[2011-12-28 03:01]  since there may be new ini options.
[2011-12-28 03:01] ***************************************************************
[2011-12-28 03:01] 
[2011-12-28 03:01] upgraded sdlmame (0.144.u3-1 -> 0.144.u4-1)
[2011-12-28 13:06] Running 'pacman -R libvpx'
[2011-12-28 13:06] Running 'pacman -Sy libvpx'
[2011-12-28 13:06] synchronizing package lists
[2011-12-28 13:07] Running 'pacman -Sy libvpx'
[2011-12-28 13:07] synchronizing package lists
[2011-12-28 13:07] upgraded libvpx (0.9.7.p1-1 -> 0.9.7.p1-1)
[2011-12-28 13:16] Running 'pacman -R libreoffice-writer'
[2011-12-28 13:16] removed libreoffice-writer (3.4.4-4)
[2011-12-28 13:16] Running 'pacman -Sy libreoffice-writer'
[2011-12-28 13:16] synchronizing package lists
[2011-12-28 13:16] installed libreoffice-writer (3.4.4-4)
[2011-12-28 13:16] Running 'pacman -Sy libwpg'
[2011-12-28 13:16] synchronizing package lists
[2011-12-28 13:16] installed libwpg (0.2.0-1)
[2011-12-28 13:18] Running 'pacman -Sy libkflake'
[2011-12-28 13:18] synchronizing package lists
[2011-12-28 13:18] Running 'pacman -Sy libflake'
[2011-12-28 13:18] synchronizing package lists
[2011-12-28 13:20] Running 'pacman -R koffice-kword'
[2011-12-28 13:20] removed koffice-kword (2.3.3-11)
[2011-12-28 13:20] Running 'pacman -Sy koffice-kword'
[2011-12-28 13:20] synchronizing package lists
[2011-12-28 13:20] installed koffice-kword (2.3.3-11)
[2011-12-28 13:21] Running 'pacman -Sy koffice-filters'
[2011-12-28 13:21] synchronizing package lists
[2011-12-28 13:22] installed koffice-filters (2.3.3-11)
[2011-12-28 13:49] Running 'pacman -Suy'
[2011-12-28 13:49] synchronizing package lists
[2011-12-28 13:49] starting full system upgrade
[2011-12-28 13:50] upgraded desktop-file-utils (0.18-1 -> 0.19-1)
[2011-12-28 13:50] upgraded libgphoto2 (2.4.10.1-2 -> 2.4.11-1)
[2011-12-28 13:50] upgraded nss (3.13.1-1 -> 3.13.1-2)
[2011-12-28 13:53] Running 'pacman -Sy java-accress-bridge gava-commons-io java-batik java-jsp2.2-tomcat'
[2011-12-28 13:53] synchronizing package lists
[2011-12-28 13:54] Running 'pacman -Sy java-access-bridge gava-commons-io java-batik java-jsp2.2-tomcat'
[2011-12-28 13:54] synchronizing package lists
[2011-12-28 13:54] Running 'pacman -Sy java-access-bridge java-commons-io java-batik java-jsp2.2-tomcat'
[2011-12-28 13:54] synchronizing package lists
[2011-12-28 13:57] installed at-spi (1.32.0-4)
[2011-12-28 13:57] installed java-access-bridge (1.26.2-3)
[2011-12-28 13:57] installed java-commons-io (1.4-4)
[2011-12-28 13:57] installed java-commons-logging (1.1.1-3)
[2011-12-28 13:57] installed java-xmlgraphics-commons (1.4-1)
[2011-12-28 13:57] installed java-batik (1.7-8)
[2011-12-28 13:57] installed java-jsp2.2-tomcat (7.0.23-1)
[2011-12-28 13:57] Running 'pacman -Sy js rhino'
[2011-12-28 13:57] synchronizing package lists
[2011-12-28 13:58] installed js (1.8.5-3)
[2011-12-28 13:58] installed rhino (1.7R3-1)
[root@meade-arch log]# [2011-12-25 01:20] Running 'pacman -Sy chromium'
g
bash: [2011-12-25: command not found
[root@meade-arch log]# [2011-12-25 01:20] synchronizing package lists

bash: [2011-12-25: command not found
[root@meade-arch log]# [2011-12-25 01:21] installed chromium (16.0.912.63-1)

bash: syntax error near unexpected token `('
[root@meade-arch log]# [2011-12-25 01:24] Running 'pacman -Sy flashplugin'

bash: [2011-12-25: command not found
[root@meade-arch log]# [2011-12-25 01:24] synchronizing package lists

bash: [2011-12-25: command not found
[root@meade-arch log]# [2011-12-25 01:25]  >> 

bash: syntax error near unexpected token `newline'
[root@meade-arch log]# [2011-12-25 01:25]  >> If you have an NVIDIA card that supports libvdpau or Broadcom Crystal HD chips,

bash: [2011-12-25: command not found
[root@meade-arch log]# [2011-12-25 01:25]  >> uncomment EnableLinuxHWVideoDecode=1 from /etc/adobe/mms.cfg.

bash: [2011-12-25: command not found
[root@meade-arch log]# [2011-12-25 01:25]  >> If you run into problems, please contact nVidia or Broadcom along with your system config info / driver version.
bash: [2011-12-25: command not found
[root@meade-arch log]# [2011-12-25 01:25]  >> 
bash: syntax error near unexpected token `newline'
[root@meade-arch log]# [2011-12-25 01:25] installed flashplugin (11.1.102.55-1)
bash: syntax error near unexpected token `('
[root@meade-arch log]# [2011-12-27 17:04] Running 'pacman -R thunderbird'
bash: [2011-12-27: command not found
[root@meade-arch log]# [2011-12-27 17:04] removed thunderbird (9.0.1-1)
bash: syntax error near unexpected token `('
[root@meade-arch log]# [2011-12-27 17:05] Running 'pacman -Sy thunderbird'
bash: [2011-12-27: command not found
[root@meade-arch log]# [2011-12-27 17:05] synchronizing package lists
bash: [2011-12-27: command not found
[root@meade-arch log]# [2011-12-27 17:06] gtk-update-icon-cache: Failed to write cache file: Input/output error
bash: [2011-12-27: command not found
[root@meade-arch log]# [2011-12-27 17:06] installed thunderbird (9.0.1-1)
bash: syntax error near unexpected token `('
[root@meade-arch log]# [2011-12-28 02:48] Running 'pacman -Suyy'
bash: [2011-12-28: command not found
[root@meade-arch log]# [2011-12-28 02:48] synchronizing package lists
bash: [2011-12-28: command not found
[root@meade-arch log]# [2011-12-28 02:48] starting full system upgrade
bash: [2011-12-28: command not found
[root@meade-arch log]# [2011-12-28 03:00] upgraded attica (0.2.9-1 -> 0.3.0-1)
bash: syntax error near unexpected token `('
[root@meade-arch log]# [2011-12-28 03:00] upgraded kdelibs (4.7.4-2 -> 4.7.4-3)
bash: syntax error near unexpected token `('
[root@meade-arch log]# [2011-12-28 03:01] upgraded kdebase-runtime (4.7.4-1 -> 4.7.4-2)
bash: syntax error near unexpected token `('
[root@meade-arch log]# [2011-12-28 03:01] warning: /etc/ntp.conf installed as /etc/ntp.conf.pacnew
bash: [2011-12-28: command not found
[root@meade-arch log]# [2011-12-28 03:01] upgraded ntp (4.2.6.p4-2 -> 4.2.6.p5-1)
bash: syntax error near unexpected token `('
[root@meade-arch log]# [2011-12-28 03:01] 
bash: [2011-12-28: command not found
[root@meade-arch log]# [2011-12-28 03:01] ***************************************************************
bash: [2011-12-28: command not found
[root@meade-arch log]# [2011-12-28 03:01]  SDLMAME has been updated. If you are upgrading directly from
bash: [2011-12-28: command not found
[root@meade-arch log]# [2011-12-28 03:01]  0.117 or earlier, you must delete all .cfg files and
bash: [2011-12-28: command not found
[root@meade-arch log]# [2011-12-28 03:01]  re-configure your controllers. You should also run
bash: [2011-12-28: command not found
[root@meade-arch log]# [2011-12-28 03:01]  'SDLMAME --newini' to force the script to create a new ini
bash: [2011-12-28: command not found
[root@meade-arch log]# [2011-12-28 03:01]  file with default settings at ~/.mame/sdlmame.ini
bash: [2011-12-28: command not found
[root@meade-arch log]# [2011-12-28 03:01]  since there may be new ini options.
bash: [2011-12-28: command not found
[root@meade-arch log]# [2011-12-28 03:01] ***************************************************************
bash: [2011-12-28: command not found
[root@meade-arch log]# [2011-12-28 03:01] 
bash: [2011-12-28: command not found
[root@meade-arch log]# [2011-12-28 03:01] upgraded sdlmame (0.144.u3-1 -> 0.144.u4-1)
bash: syntax error near unexpected token `('
[root@meade-arch log]# [2011-12-28 13:06] Running 'pacman -R libvpx'
bash: [2011-12-28: command not found
[root@meade-arch log]# [2011-12-28 13:06] Running 'pacman -Sy libvpx'
bash: [2011-12-28: command not found
[root@meade-arch log]# [2011-12-28 13:06] synchronizing package lists
bash: [2011-12-28: command not found
[root@meade-arch log]# [2011-12-28 13:07] Running 'pacman -Sy libvpx'
bash: [2011-12-28: command not found
[root@meade-arch log]# [2011-12-28 13:07] synchronizing package lists
bash: [2011-12-28: command not found
[root@meade-arch log]# [2011-12-28 13:07] upgraded libvpx (0.9.7.p1-1 -> 0.9.7.p1-1)
bash: syntax error near unexpected token `('
[root@meade-arch log]# [2011-12-28 13:16] Running 'pacman -R libreoffice-writer'
bash: [2011-12-28: command not found
[root@meade-arch log]# [2011-12-28 13:16] removed libreoffice-writer (3.4.4-4)
bash: syntax error near unexpected token `('
[root@meade-arch log]# [2011-12-28 13:16] Running 'pacman -Sy libreoffice-writer'
bash: [2011-12-28: command not found
[root@meade-arch log]# [2011-12-28 13:16] synchronizing package lists
bash: [2011-12-28: command not found
[root@meade-arch log]# [2011-12-28 13:16] installed libreoffice-writer (3.4.4-4)
bash: syntax error near unexpected token `('
[root@meade-arch log]# [2011-12-28 13:16] Running 'pacman -Sy libwpg'
bash: [2011-12-28: command not found
[root@meade-arch log]# [2011-12-28 13:16] synchronizing package lists
bash: [2011-12-28: command not found
[root@meade-arch log]# [2011-12-28 13:16] installed libwpg (0.2.0-1)
bash: syntax error near unexpected token `('
[root@meade-arch log]# [2011-12-28 13:18] Running 'pacman -Sy libkflake'
bash: [2011-12-28: command not found
[root@meade-arch log]# [2011-12-28 13:18] synchronizing package lists
bash: [2011-12-28: command not found
[root@meade-arch log]# [2011-12-28 13:18] Running 'pacman -Sy libflake'
bash: [2011-12-28: command not found
[root@meade-arch log]# [2011-12-28 13:18] synchronizing package lists
bash: [2011-12-28: command not found
[root@meade-arch log]# [2011-12-28 13:20] Running 'pacman -R koffice-kword'
bash: [2011-12-28: command not found
[root@meade-arch log]# [2011-12-28 13:20] removed koffice-kword (2.3.3-11)
bash: syntax error near unexpected token `('
[root@meade-arch log]# [2011-12-28 13:20] Running 'pacman -Sy koffice-kword'
bash: [2011-12-28: command not found
[root@meade-arch log]# [2011-12-28 13:20] synchronizing package lists
bash: [2011-12-28: command not found
[root@meade-arch log]# [2011-12-28 13:20] installed koffice-kword (2.3.3-11)
bash: syntax error near unexpected token `('
[root@meade-arch log]# [2011-12-28 13:21] Running 'pacman -Sy koffice-filters'
bash: [2011-12-28: command not found
[root@meade-arch log]# [2011-12-28 13:21] synchronizing package lists
bash: [2011-12-28: command not found
[root@meade-arch log]# [2011-12-28 13:22] installed koffice-filters (2.3.3-11)
bash: syntax error near unexpected token `('
[root@meade-arch log]# [2011-12-28 13:49] Running 'pacman -Suy'
bash: [2011-12-28: command not found
[root@meade-arch log]# [2011-12-28 13:49] synchronizing package lists
bash: [2011-12-28: command not found
[root@meade-arch log]# [2011-12-28 13:49] starting full system upgrade
bash: [2011-12-28: command not found
[root@meade-arch log]# [2011-12-28 13:50] upgraded desktop-file-utils (0.18-1 -> 0.19-1)
bash: syntax error near unexpected token `('
[root@meade-arch log]# [2011-12-28 13:50] upgraded libgphoto2 (2.4.10.1-2 -> 2.4.11-1)
bash: syntax error near unexpected token `('
[root@meade-arch log]# [2011-12-28 13:50] upgraded nss (3.13.1-1 -> 3.13.1-2)
bash: syntax error near unexpected token `('
[root@meade-arch log]# [2011-12-28 13:53] Running 'pacman -Sy java-accress-bridge gava-commons-io java-batik java-jsp2.2-tomcat'
bash: [2011-12-28: command not found
[root@meade-arch log]# [2011-12-28 13:53] synchronizing package lists
bash: [2011-12-28: command not found
[root@meade-arch log]# [2011-12-28 13:54] Running 'pacman -Sy java-access-bridge gava-commons-io java-batik java-jsp2.2-tomcat'
bash: [2011-12-28: command not found
[root@meade-arch log]# [2011-12-28 13:54] synchronizing package lists
bash: [2011-12-28: command not found
[root@meade-arch log]# [2011-12-28 13:54] Running
bash: [2011-12-28: command not found
[root@meade-arch log]# [2011-12-28 13:54] synchronizing package lists
bash: [2011-12-28: command not found
[root@meade-arch log]# [2011-12-28 13:57] installed at-spi (1.32.0-4)
bash: syntax error near unexpected token `('
[root@meade-arch log]# [2011-
bash: [2011-: command not found
[root@meade-arch log]# [2011-12-28 13:57] installed java-commons-io (1.4-4
bash: syntax error near unexpected token `('
[root@meade-arch log]# [2011-12-28 13:57] installed java-commons-logg
bash: [2011-12-28: command not found
[root@meade-arch log]# [2011-12-28 13:57] inst
bash: [2011-12-28: command not found
[root@meade-arch log]# [2011-12-28 13:57] installed java-batik (1.7-8)
bash: syntax error near unexpected token `('
[root@meade-arch log]# [2011-12-28 13:57] installed java-jsp2.2-tomcat (7.0.2
bash: syntax error near unexpected token `('
[root@meade-arch log]# [2011-12-28 13:57] Running 'pacman -Sy js rhino'
bash: [2011-12-28: command not found
[root@meade-arch log]# [2011-12-28 13:57] synchronizing pa
bash: [2011-12-28: command not found
[root@meade-arch log]# [2011-12-28 13:58] installed js (1.8.5-3)
bash: syntax error near unexpected token `('
[root@meade-arch log]# [2011-12-28 13:58] installed rhino (1.7R3-1)
bash: syntax error near unexpected token `('

karol · 2011-12-28 20:08:46

Wow, that was a massive update.
Why were you doing 'pacman -Sy foo' for some packages?

nadman10 · 2011-12-28 20:12:26

They wouldn't install from a "pacman -Syu". I got errors on certain packages, so I manually updated those ones first. Even some of those wouldn't update, so I had to uninstall and reinstall them. I know, it's been a long time since I did a system update on my machine.

karol · 2011-12-28 20:17:29

[2011-12-24 18:17] upgraded libreoffice-writer (3.4.4-3 -> 3.4.4-4)
...
[2011-12-28 13:16] Running 'pacman -R libreoffice-writer'
[2011-12-28 13:16] removed libreoffice-writer (3.4.4-4)
[2011-12-28 13:16] Running 'pacman -Sy libreoffice-writer'
[2011-12-28 13:16] synchronizing package lists
[2011-12-28 13:16] installed libreoffice-writer (3.4.4-4)

I see no errors in the log, do you remember what they were?

Post the output of

pacman -Qs openjdk
pacman -Qs phonon

nadman10 · 2011-12-28 20:20:48

[root@meade-arch log]# pacman -Qs openjdk
local/jdk7-openjdk 7.b147_2.0-4
    Free Java environment based on OpenJDK 7.0 with IcedTea7 replacing binary plugs - SDK
local/jre7-openjdk 7.b147_2.0-4
    Free Java environment based on OpenJDK 7.0 with IcedTea7 replacing binary plugs - runtime environment

local/phonon 1:4.6.0-1
    The multimedia framework for KDE
local/phonon-gstreamer 4.5.1-1
    Phonon GStreamer backend

karol · 2011-12-28 20:46:54

I've installed the same java and phonon backend and still everything's fine.
I'm not using KDE though.

nadman10 · 2011-12-28 20:48:03

Where else could I look for some type of error report?

karol · 2011-12-28 21:55:34

No idea.
Do you remember what kind of errors you got when you tried to install libreoffice th first time? Maybe try removing it and installing again.

nadman10 · 2011-12-28 22:28:08

No errors. It worked fine until the update. I tried uninstalling and reinstalling already.

toad · 2011-12-29 08:02:01

What output do you get when starting LO from the command line or failing that with strace?

karol · 2011-12-29 11:47:08

toad wrote:

What output do you get when starting LO from the command line or failing that with strace?

First post:

nadman10 wrote:

Libreoffice crashes on startup with no errors in the console.

Maybe there's a verbosity switch somewhere?

toad · 2011-12-29 12:05:00

Oops, thanks, karol. Still:

... failing that with strace?

nadman10 · 2011-12-29 17:24:54

nadman10 wrote:

If I run it as root, I do get the error: "Application Error".

Still no clue.

Last edited by nadman10 (2011-12-29 17:25:15)

toad · 2011-12-29 17:33:49

Indeed not much to go on. Hence I'd start it with strace. From man strace:

In the simplest case strace runs the specified command until it exits.
It intercepts and records the system calls which are called by a
process and the signals which are received by a process. The name of
each system call, its arguments and its return value are printed on
standard error or to the file specified with the -o option.
strace is a useful diagnostic, instructional, and debugging tool.

nadman10 · 2011-12-29 17:56:09

Ran strace:

rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
pipe([3, 4])                            = 0
rt_sigprocmask(SIG_BLOCK, [CHLD], [], 8) = 0
rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0
rt_sigprocmask(SIG_BLOCK, [INT CHLD], [], 8) = 0
_llseek(255, -1274, [1936], SEEK_CUR)   = 0
clone(child_stack=0, flags=CLONE_CHILD_CLEARTID|CLONE_CHILD_SETTID|SIGCHLD, child_tidptr=0xb755f728) = 4139
rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0
rt_sigaction(SIGCHLD, {0x807e800, [], SA_RESTART}, {0x807e800, [], SA_RESTART}, 8) = 0
close(4)                                = 0
read(3, "/usr/lib/libreoffice/program\n", 128) = 29
read(3, "", 128)                        = 0
close(3)                                = 0
rt_sigprocmask(SIG_BLOCK, [CHLD], [], 8) = 0
rt_sigaction(SIGINT, {0x807be50, [], 0}, {SIG_DFL, [], 0}, 8) = 0
waitpid(-1, [{WIFEXITED(s) && WEXITSTATUS(s) == 0}], 0) = 4139
rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0
--- {si_signo=SIGCHLD, si_code=CLD_EXITED, si_pid=4139, si_status=0, si_utime=0, si_stime=0} (Child exited) ---
waitpid(-1, 0xbfeb38c8, WNOHANG)        = -1 ECHILD (No child processes)
sigreturn()                             = ? (mask now [])
rt_sigaction(SIGINT, {SIG_DFL, [], 0}, {0x807be50, [], 0}, 8) = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
read(255, "sd_res=$0\nwhile [ -h \"$sd_res\" ]"..., 3210) = 1274
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
lstat64("/usr/bin/soffice", {st_mode=S_IFLNK|0777, st_size=36, ...}) = 0
rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0
pipe([3, 4])                            = 0
rt_sigprocmask(SIG_BLOCK, [CHLD], [], 8) = 0
rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0
rt_sigprocmask(SIG_BLOCK, [INT CHLD], [], 8) = 0
_llseek(255, -1099, [2111], SEEK_CUR)   = 0
clone(child_stack=0, flags=CLONE_CHILD_CLEARTID|CLONE_CHILD_SETTID|SIGCHLD, child_tidptr=0xb755f728) = 4140
rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0
rt_sigaction(SIGCHLD, {0x807e800, [], SA_RESTART}, {0x807e800, [], SA_RESTART}, 8) = 0
close(4)                                = 0
read(3, "/usr/bin\n", 128)              = 9
read(3, "", 128)                        = 0
--- {si_signo=SIGCHLD, si_code=CLD_EXITED, si_pid=4140, si_status=0, si_utime=0, si_stime=0} (Child exited) ---
waitpid(-1, [{WIFEXITED(s) && WEXITSTATUS(s) == 0}], WNOHANG) = 4140
waitpid(-1, 0xbfeb3698, WNOHANG)        = -1 ECHILD (No child processes)
sigreturn()                             = ? (mask now [])
close(3)                                = 0
rt_sigprocmask(SIG_BLOCK, [CHLD], [], 8) = 0
rt_sigaction(SIGINT, {0x807be50, [], 0}, {SIG_DFL, [], 0}, 8) = 0
rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0
rt_sigaction(SIGINT, {SIG_DFL, [], 0}, {0x807be50, [], 0}, 8) = 0
stat64("/usr", {st_mode=S_IFDIR|0755, st_size=4096, ...}) = 0
stat64("/usr/bin", {st_mode=S_IFDIR|0755, st_size=53248, ...}) = 0
chdir("/usr/bin")                       = 0
pipe([3, 4])                            = 0
rt_sigprocmask(SIG_BLOCK, [CHLD], [], 8) = 0
rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0
rt_sigprocmask(SIG_BLOCK, [INT CHLD], [], 8) = 0
clone(child_stack=0, flags=CLONE_CHILD_CLEARTID|CLONE_CHILD_SETTID|SIGCHLD, child_tidptr=0xb755f728) = 4141
rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0
rt_sigaction(SIGCHLD, {0x807e800, [], SA_RESTART}, {0x807e800, [], SA_RESTART}, 8) = 0
close(4)                                = 0
read(3, "soffice\n", 128)               = 8
--- {si_signo=SIGCHLD, si_code=CLD_EXITED, si_pid=4141, si_status=0, si_utime=0, si_stime=0} (Child exited) ---
waitpid(-1, [{WIFEXITED(s) && WEXITSTATUS(s) == 0}], WNOHANG) = 4141
waitpid(-1, 0xbfeb3698, WNOHANG)        = -1 ECHILD (No child processes)
sigreturn()                             = ? (mask now [])
read(3, "", 128)                        = 0
close(3)                                = 0
rt_sigprocmask(SIG_BLOCK, [CHLD], [], 8) = 0
rt_sigaction(SIGINT, {0x807be50, [], 0}, {SIG_DFL, [], 0}, 8) = 0
rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0
rt_sigaction(SIGINT, {SIG_DFL, [], 0}, {0x807be50, [], 0}, 8) = 0
pipe([3, 4])                            = 0
rt_sigprocmask(SIG_BLOCK, [CHLD], [], 8) = 0
rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0
rt_sigprocmask(SIG_BLOCK, [INT CHLD], [], 8) = 0
clone(child_stack=0, flags=CLONE_CHILD_CLEARTID|CLONE_CHILD_SETTID|SIGCHLD, child_tidptr=0xb755f728) = 4142
rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0
rt_sigaction(SIGCHLD, {0x807e800, [], SA_RESTART}, {0x807e800, [], SA_RESTART}, 8) = 0
close(4)                                = 0
read(3, "/usr/lib/libreoffice/program/sof"..., 128) = 37
read(3, "", 128)                        = 0
--- {si_signo=SIGCHLD, si_code=CLD_EXITED, si_pid=4142, si_status=0, si_utime=0, si_stime=0} (Child exited) ---
waitpid(-1, [{WIFEXITED(s) && WEXITSTATUS(s) == 0}], WNOHANG) = 4142
waitpid(-1, 0xbfeb37f8, WNOHANG)        = -1 ECHILD (No child processes)
sigreturn()                             = ? (mask now [])
close(3)                                = 0
rt_sigprocmask(SIG_BLOCK, [CHLD], [], 8) = 0
rt_sigaction(SIGINT, {0x807be50, [], 0}, {SIG_DFL, [], 0}, 8) = 0
rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0
rt_sigaction(SIGINT, {SIG_DFL, [], 0}, {0x807be50, [], 0}, 8) = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
lstat64("/usr/lib/libreoffice/program/soffice", {st_mode=S_IFREG|0755, st_size=3210, ...}) = 0
rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
read(255, "cd \"`dirname \"$sd_res\"`\"\nsd_prog"..., 3210) = 1099
pipe([3, 4])                            = 0
rt_sigprocmask(SIG_BLOCK, [CHLD], [], 8) = 0
rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0
rt_sigprocmask(SIG_BLOCK, [INT CHLD], [], 8) = 0
_llseek(255, -1074, [2136], SEEK_CUR)   = 0
clone(child_stack=0, flags=CLONE_CHILD_CLEARTID|CLONE_CHILD_SETTID|SIGCHLD, child_tidptr=0xb755f728) = 4145
rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0
rt_sigaction(SIGCHLD, {0x807e800, [], SA_RESTART}, {0x807e800, [], SA_RESTART}, 8) = 0
close(4)                                = 0
read(3, "/usr/lib/libreoffice/program\n", 128) = 29
read(3, "", 128)                        = 0
--- {si_signo=SIGCHLD, si_code=CLD_EXITED, si_pid=4145, si_status=0, si_utime=0, si_stime=0} (Child exited) ---
waitpid(-1, [{WIFEXITED(s) && WEXITSTATUS(s) == 0}], WNOHANG) = 4145
waitpid(-1, 0xbfeb3a98, WNOHANG)        = -1 ECHILD (No child processes)
sigreturn()                             = ? (mask now [])
close(3)                                = 0
rt_sigprocmask(SIG_BLOCK, [CHLD], [], 8) = 0
rt_sigaction(SIGINT, {0x807be50, [], 0}, {SIG_DFL, [], 0}, 8) = 0
rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0
rt_sigaction(SIGINT, {SIG_DFL, [], 0}, {0x807be50, [], 0}, 8) = 0
stat64("/usr", {st_mode=S_IFDIR|0755, st_size=4096, ...}) = 0
stat64("/usr/lib", {st_mode=S_IFDIR|0755, st_size=102400, ...}) = 0
stat64("/usr/lib/libreoffice", {st_mode=S_IFDIR|0755, st_size=4096, ...}) = 0
stat64("/usr/lib/libreoffice/program", {st_mode=S_IFDIR|0755, st_size=4096, ...}) = 0
chdir("/usr/lib/libreoffice/program")   = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
read(255, "sd_prog=`pwd`\ncd \"$sd_cwd\"\n\n# li"..., 3210) = 1074
pipe([3, 4])                            = 0
rt_sigprocmask(SIG_BLOCK, [CHLD], [], 8) = 0
rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0
rt_sigprocmask(SIG_BLOCK, [INT CHLD], [], 8) = 0
_llseek(255, -1060, [2150], SEEK_CUR)   = 0
clone(child_stack=0, flags=CLONE_CHILD_CLEARTID|CLONE_CHILD_SETTID|SIGCHLD, child_tidptr=0xb755f728) = 4146
rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0
rt_sigaction(SIGCHLD, {0x807e800, [], SA_RESTART}, {0x807e800, [], SA_RESTART}, 8) = 0
close(4)                                = 0
read(3, "/usr/lib/libreoffice/program\n", 128) = 29
read(3, "", 128)                        = 0
--- {si_signo=SIGCHLD, si_code=CLD_EXITED, si_pid=4146, si_status=0, si_utime=0, si_stime=0} (Child exited) ---
waitpid(-1, [{WIFEXITED(s) && WEXITSTATUS(s) == 0}], WNOHANG) = 4146
waitpid(-1, 0xbfeb3a68, WNOHANG)        = -1 ECHILD (No child processes)
sigreturn()                             = ? (mask now [])
close(3)                                = 0
rt_sigprocmask(SIG_BLOCK, [CHLD], [], 8) = 0
rt_sigaction(SIGINT, {0x807be50, [], 0}, {SIG_DFL, [], 0}, 8) = 0
rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0
rt_sigaction(SIGINT, {SIG_DFL, [], 0}, {0x807be50, [], 0}, 8) = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
read(255, "cd \"$sd_cwd\"\n\n# linked build nee"..., 3210) = 1060
stat64("/usr", {st_mode=S_IFDIR|0755, st_size=4096, ...}) = 0
stat64("/usr/lib", {st_mode=S_IFDIR|0755, st_size=102400, ...}) = 0
stat64("/usr/lib/libreoffice", {st_mode=S_IFDIR|0755, st_size=4096, ...}) = 0
stat64("/usr/lib/libreoffice/program", {st_mode=S_IFDIR|0755, st_size=4096, ...}) = 0
chdir("/usr/lib/libreoffice/program")   = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
stat64("/usr/lib/libreoffice/program/ooenv", 0xbfeb4128) = -1 ENOENT (No such file or directory)
rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
pipe([3, 4])                            = 0
rt_sigprocmask(SIG_BLOCK, [CHLD], [], 8) = 0
rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0
rt_sigprocmask(SIG_BLOCK, [INT CHLD], [], 8) = 0
_llseek(255, -111, [3099], SEEK_CUR)    = 0
clone(child_stack=0, flags=CLONE_CHILD_CLEARTID|CLONE_CHILD_SETTID|SIGCHLD, child_tidptr=0xb755f728) = 4147
rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0
rt_sigaction(SIGCHLD, {0x807e800, [], SA_RESTART}, {0x807e800, [], SA_RESTART}, 8) = 0
close(4)                                = 0
read(3, "Linux\n", 128)                 = 6
read(3, "", 128)                        = 0
--- {si_signo=SIGCHLD, si_code=CLD_EXITED, si_pid=4147, si_status=0, si_utime=0, si_stime=0} (Child exited) ---
waitpid(-1, [{WIFEXITED(s) && WEXITSTATUS(s) == 0}], WNOHANG) = 4147
waitpid(-1, 0xbfeb3a68, WNOHANG)        = -1 ECHILD (No child processes)
sigreturn()                             = ? (mask now [])
close(3)                                = 0
rt_sigprocmask(SIG_BLOCK, [CHLD], [], 8) = 0
rt_sigaction(SIGINT, {0x807be50, [], 0}, {SIG_DFL, [], 0}, 8) = 0
rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0
rt_sigaction(SIGINT, {SIG_DFL, [], 0}, {0x807be50, [], 0}, 8) = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
read(255, "\n# oosplash does the rest: forci"..., 3210) = 111
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8)  = 0
rt_sigaction(SIGINT, {SIG_DFL, [], 0}, {SIG_DFL, [], 0}, 8) = 0
rt_sigaction(SIGQUIT, {SIG_DFL, [], 0}, {SIG_IGN, [], 0}, 8) = 0
rt_sigaction(SIGCHLD, {SIG_DFL, [], SA_RESTART}, {0x807e800, [], SA_RESTART}, 8) = 0
execve("/usr/lib/libreoffice/program/oosplash.bin", ["/usr/lib/libreoffice/program/oos"...], [/* 45 vars */]) = 0
brk(0)                                  = 0x9dd7000
mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xb77ff000
readlink("/proc/self/exe", "/usr/lib/libreoffice/program/oosplash.bin", 4096) = 41
access("/etc/ld.so.preload", R_OK)      = -1 ENOENT (No such file or directory)
open("/usr/lib/libreoffice/program/tls/i686/sse2/libpthread.so.0", O_RDONLY) = -1 ENOENT (No such file or directory)
stat64("/usr/lib/libreoffice/program/tls/i686/sse2", 0xbf9cb038) = -1 ENOENT (No such file or directory)
open("/usr/lib/libreoffice/program/tls/i686/libpthread.so.0", O_RDONLY) = -1 ENOENT (No such file or directory)
stat64("/usr/lib/libreoffice/program/tls/i686", 0xbf9cb038) = -1 ENOENT (No such file or directory)
open("/usr/lib/libreoffice/program/tls/sse2/libpthread.so.0", O_RDONLY) = -1 ENOENT (No such file or directory)
stat64("/usr/lib/libreoffice/program/tls/sse2", 0xbf9cb038) = -1 ENOENT (No such file or directory)
open("/usr/lib/libreoffice/program/tls/libpthread.so.0", O_RDONLY) = -1 ENOENT (No such file or directory)
stat64("/usr/lib/libreoffice/program/tls", 0xbf9cb038) = -1 ENOENT (No such file or directory)
open("/usr/lib/libreoffice/program/i686/sse2/libpthread.so.0", O_RDONLY) = -1 ENOENT (No such file or directory)
stat64("/usr/lib/libreoffice/program/i686/sse2", 0xbf9cb038) = -1 ENOENT (No such file or directory)
open("/usr/lib/libreoffice/program/i686/libpthread.so.0", O_RDONLY) = -1 ENOENT (No such file or directory)
stat64("/usr/lib/libreoffice/program/i686", 0xbf9cb038) = -1 ENOENT (No such file or directory)
open("/usr/lib/libreoffice/program/sse2/libpthread.so.0", O_RDONLY) = -1 ENOENT (No such file or directory)
stat64("/usr/lib/libreoffice/program/sse2", 0xbf9cb038) = -1 ENOENT (No such file or directory)
open("/usr/lib/libreoffice/program/libpthread.so.0", O_RDONLY) = -1 ENOENT (No such file or directory)
stat64("/usr/lib/libreoffice/program", {st_mode=S_IFDIR|0755, st_size=4096, ...}) = 0
open("/usr/lib/libreoffice/program/../basis-link/program/tls/i686/sse2/libpthread.so.0", O_RDONLY) = -1 ENOENT (No such file or directory)
stat64("/usr/lib/libreoffice/program/../basis-link/program/tls/i686/sse2", 0xbf9cb038) = -1 ENOENT (No such file or directory)
open("/usr/lib/libreoffice/program/../basis-link/program/tls/i686/libpthread.so.0", O_RDONLY) = -1 ENOENT (No such file or directory)
stat64("/usr/lib/libreoffice/program/../basis-link/program/tls/i686", 0xbf9cb038) = -1 ENOENT (No such file or directory)
open("/usr/lib/libreoffice/program/../basis-link/program/tls/sse2/libpthread.so.0", O_RDONLY) = -1 ENOENT (No such file or directory)
stat64("/usr/lib/libreoffice/program/../basis-link/program/tls/sse2", 0xbf9cb038) = -1 ENOENT (No such file or directory)
open("/usr/lib/libreoffice/program/../basis-link/program/tls/libpthread.so.0", O_RDONLY) = -1 ENOENT (No such file or directory)
stat64("/usr/lib/libreoffice/program/../basis-link/program/tls", 0xbf9cb038) = -1 ENOENT (No such file or directory)
open("/usr/lib/libreoffice/program/../basis-link/program/i686/sse2/libpthread.so.0", O_RDONLY) = -1 ENOENT (No such file or directory)
stat64("/usr/lib/libreoffice/program/../basis-link/program/i686/sse2", 0xbf9cb038) = -1 ENOENT (No such file or directory)
open("/usr/lib/libreoffice/program/../basis-link/program/i686/libpthread.so.0", O_RDONLY) = -1 ENOENT (No such file or directory)
stat64("/usr/lib/libreoffice/program/../basis-link/program/i686", 0xbf9cb038) = -1 ENOENT (No such file or directory)
open("/usr/lib/libreoffice/program/../basis-link/program/sse2/libpthread.so.0", O_RDONLY) = -1 ENOENT (No such file or directory)
stat64("/usr/lib/libreoffice/program/../basis-link/program/sse2", 0xbf9cb038) = -1 ENOENT (No such file or directory)
open("/usr/lib/libreoffice/program/../basis-link/program/libpthread.so.0", O_RDONLY) = -1 ENOENT (No such file or directory)
stat64("/usr/lib/libreoffice/program/../basis-link/program", {st_mode=S_IFDIR|0755, st_size=8192, ...}) = 0
open("/usr/lib/libreoffice/program/../basis-link/ure-link/lib/tls/i686/sse2/libpthread.so.0", O_RDONLY) = -1 ENOENT (No such file or directory)
stat64("/usr/lib/libreoffice/program/../basis-link/ure-link/lib/tls/i686/sse2", 0xbf9cb038) = -1 ENOENT (No such file or directory)
open("/usr/lib/libreoffice/program/../basis-link/ure-link/lib/tls/i686/libpthread.so.0", O_RDONLY) = -1 ENOENT (No such file or directory)
stat64("/usr/lib/libreoffice/program/../basis-link/ure-link/lib/tls/i686", 0xbf9cb038) = -1 ENOENT (No such file or directory)
open("/usr/lib/libreoffice/program/../basis-link/ure-link/lib/tls/sse2/libpthread.so.0", O_RDONLY) = -1 ENOENT (No such file or directory)
stat64("/usr/lib/libreoffice/program/../basis-link/ure-link/lib/tls/sse2", 0xbf9cb038) = -1 ENOENT (No such file or directory)
open("/usr/lib/libreoffice/program/../basis-link/ure-link/lib/tls/libpthread.so.0", O_RDONLY) = -1 ENOENT (No such file or directory)
stat64("/usr/lib/libreoffice/program/../basis-link/ure-link/lib/tls", 0xbf9cb038) = -1 ENOENT (No such file or directory)
open("/usr/lib/libreoffice/program/../basis-link/ure-link/lib/i686/sse2/libpthread.so.0", O_RDONLY) = -1 ENOENT (No such file or directory)
stat64("/usr/lib/libreoffice/program/../basis-link/ure-link/lib/i686/sse2", 0xbf9cb038) = -1 ENOENT (No such file or directory)
open("/usr/lib/libreoffice/program/../basis-link/ure-link/lib/i686/libpthread.so.0", O_RDONLY) = -1 ENOENT (No such file or directory)
stat64("/usr/lib/libreoffice/program/../basis-link/ure-link/lib/i686", 0xbf9cb038) = -1 ENOENT (No such file or directory)
open("/usr/lib/libreoffice/program/../basis-link/ure-link/lib/sse2/libpthread.so.0", O_RDONLY) = -1 ENOENT (No such file or directory)
stat64("/usr/lib/libreoffice/program/../basis-link/ure-link/lib/sse2", 0xbf9cb038) = -1 ENOENT (No such file or directory)
open("/usr/lib/libreoffice/program/../basis-link/ure-link/lib/libpthread.so.0", O_RDONLY) = -1 ENOENT (No such file or directory)
stat64("/usr/lib/libreoffice/program/../basis-link/ure-link/lib", {st_mode=S_IFDIR|0755, st_size=4096, ...}) = 0
open("/etc/ld.so.cache", O_RDONLY)      = 3
fstat64(3, {st_mode=S_IFREG|0644, st_size=136383, ...}) = 0
mmap2(NULL, 136383, PROT_READ, MAP_PRIVATE, 3, 0) = 0xb77dd000
close(3)                                = 0
open("/lib/libpthread.so.0", O_RDONLY)  = 3
read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0 [\0\0004\0\0\0"..., 512) = 512
fstat64(3, {st_mode=S_IFREG|0755, st_size=130646, ...}) = 0
mmap2(NULL, 107008, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0xb77c2000
mmap2(0xb77d9000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x16) = 0xb77d9000
mmap2(0xb77db000, 4608, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0xb77db000
close(3)                                = 0
open("/usr/lib/libreoffice/program/libX11.so.6", O_RDONLY) = -1 ENOENT (No such file or directory)
open("/usr/lib/libreoffice/program/../basis-link/program/libX11.so.6", O_RDONLY) = -1 ENOENT (No such file or directory)
open("/usr/lib/libreoffice/program/../basis-link/ure-link/lib/libX11.so.6", O_RDONLY) = -1 ENOENT (No such file or directory)
open("/usr/lib/libX11.so.6", O_RDONLY)  = 3
read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\300?\1\0004\0\0\0"..., 512) = 512
fstat64(3, {st_mode=S_IFREG|0755, st_size=1265428, ...}) = 0
mmap2(NULL, 1269368, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0xb768c000
mmap2(0xb77be000, 16384, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x131) = 0xb77be000
close(3)                                = 0
open("/usr/lib/libreoffice/program/libuno_sal.so.3", O_RDONLY) = -1 ENOENT (No such file or directory)
open("/usr/lib/libreoffice/program/../basis-link/program/libuno_sal.so.3", O_RDONLY) = -1 ENOENT (No such file or directory)
open("/usr/lib/libreoffice/program/../basis-link/ure-link/lib/libuno_sal.so.3", O_RDONLY) = 3
read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\360\266\0\0004\0\0\0"..., 512) = 512
fstat64(3, {st_mode=S_IFREG|0644, st_size=340072, ...}) = 0
mmap2(NULL, 346632, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0xb7637000
mmap2(0xb7688000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x51) = 0xb7688000
mmap2(0xb768a000, 6664, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0xb768a000
close(3)                                = 0
open("/usr/lib/libreoffice/program/libpng14.so.14", O_RDONLY) = -1 ENOENT (No such file or directory)
open("/usr/lib/libreoffice/program/../basis-link/program/libpng14.so.14", O_RDONLY) = -1 ENOENT (No such file or directory)
open("/usr/lib/libreoffice/program/../basis-link/ure-link/lib/libpng14.so.14", O_RDONLY) = -1 ENOENT (No such file or directory)
open("/usr/lib/libpng14.so.14", O_RDONLY) = 3
read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\2406\0\0004\0\0\0"..., 512) = 512
fstat64(3, {st_mode=S_IFREG|0755, st_size=175068, ...}) = 0
mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xb7636000
mmap2(NULL, 177804, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0xb760a000
mmap2(0xb7635000, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x2a) = 0xb7635000
close(3)                                = 0
open("/usr/lib/libreoffice/program/libc.so.6", O_RDONLY) = -1 ENOENT (No such file or directory)
open("/usr/lib/libreoffice/program/../basis-link/program/libc.so.6", O_RDONLY) = -1 ENOENT (No such file or directory)
open("/usr/lib/libreoffice/program/../basis-link/ure-link/lib/libc.so.6", O_RDONLY) = -1 ENOENT (No such file or directory)
open("/lib/libc.so.6", O_RDONLY)        = 3
read(3, "\177ELF\1\1\1\3\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0p\223\1\0004\0\0\0"..., 512) = 512
fstat64(3, {st_mode=S_IFREG|0755, st_size=1792923, ...}) = 0
mmap2(NULL, 1559072, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0xb748d000
mprotect(0xb7603000, 4096, PROT_NONE)   = 0
mmap2(0xb7604000, 12288, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x176) = 0xb7604000
mmap2(0xb7607000, 10784, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0xb7607000
close(3)                                = 0
open("/usr/lib/libxcb.so.1", O_RDONLY)  = 3
read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\260n\0\0004\0\0\0"..., 512) = 512
fstat64(3, {st_mode=S_IFREG|0755, st_size=120920, ...}) = 0
mmap2(NULL, 119628, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0xb746f000
mmap2(0xb748c000, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x1d) = 0xb748c000
close(3)                                = 0
open("/lib/libdl.so.2", O_RDONLY)       = 3
read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0`\n\0\0004\0\0\0"..., 512) = 512
fstat64(3, {st_mode=S_IFREG|0755, st_size=13952, ...}) = 0
mmap2(NULL, 16504, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0xb746a000
mmap2(0xb746d000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x2) = 0xb746d000
close(3)                                = 0
open("/usr/lib/libreoffice/program/../basis-link/ure-link/lib/libstdc++.so.6", O_RDONLY) = -1 ENOENT (No such file or directory)
open("/usr/lib/libstdc++.so.6", O_RDONLY) = 3
read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0000\247\4\0004\0\0\0"..., 512) = 512
fstat64(3, {st_mode=S_IFREG|0755, st_size=926244, ...}) = 0
mmap2(NULL, 951720, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0xb7381000
mmap2(0xb745e000, 20480, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0xdd) = 0xb745e000
mmap2(0xb7463000, 26024, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0xb7463000
close(3)                                = 0
open("/usr/lib/libreoffice/program/../basis-link/ure-link/lib/libm.so.6", O_RDONLY) = -1 ENOENT (No such file or directory)
open("/lib/libm.so.6", O_RDONLY)        = 3
read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\2604\0\0004\0\0\0"..., 512) = 512
fstat64(3, {st_mode=S_IFREG|0755, st_size=169488, ...}) = 0
mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xb7380000
mmap2(NULL, 168064, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0xb7356000
mmap2(0xb737e000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x28) = 0xb737e000
close(3)                                = 0
open("/usr/lib/libreoffice/program/../basis-link/ure-link/lib/libgcc_s.so.1", O_RDONLY) = -1 ENOENT (No such file or directory)
open("/usr/lib/libgcc_s.so.1", O_RDONLY) = 3
read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\260#\0\0004\0\0\0"..., 512) = 512
fstat64(3, {st_mode=S_IFREG|0644, st_size=115124, ...}) = 0
mmap2(NULL, 118192, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0xb7339000
mmap2(0xb7355000, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x1b) = 0xb7355000
close(3)                                = 0
open("/usr/lib/libz.so.1", O_RDONLY)    = 3
read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0P\27\0\0004\0\0\0"..., 512) = 512
fstat64(3, {st_mode=S_IFREG|0755, st_size=91728, ...}) = 0
mmap2(NULL, 94452, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0xb7321000
mmap2(0xb7337000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x15) = 0xb7337000
close(3)                                = 0
open("/usr/lib/libXau.so.6", O_RDONLY)  = 3
read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\300\10\0\0004\0\0\0"..., 512) = 512
fstat64(3, {st_mode=S_IFREG|0755, st_size=7200, ...}) = 0
mmap2(NULL, 10112, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0xb731e000
mmap2(0xb7320000, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x1) = 0xb7320000
close(3)                                = 0
open("/usr/lib/libXdmcp.so.6", O_RDONLY) = 3
read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0 \r\0\0004\0\0\0"..., 512) = 512
fstat64(3, {st_mode=S_IFREG|0755, st_size=16168, ...}) = 0
mmap2(NULL, 19112, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0xb7319000
mmap2(0xb731d000, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x3) = 0xb731d000
close(3)                                = 0
mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xb7318000
mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xb7317000
set_thread_area({entry_number:-1 -> 6, base_addr:0xb73178e0, limit:1048575, seg_32bit:1, contents:0, read_exec_only:0, limit_in_pages:1, seg_not_present:0, useable:1}) = 0
mprotect(0xb7337000, 4096, PROT_READ)   = 0
mprotect(0xb737e000, 4096, PROT_READ)   = 0
mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xb7316000
mprotect(0xb745e000, 16384, PROT_READ)  = 0
mprotect(0xb746d000, 4096, PROT_READ)   = 0
mprotect(0xb7604000, 8192, PROT_READ)   = 0
mprotect(0xb77d9000, 4096, PROT_READ)   = 0
mprotect(0xb7820000, 4096, PROT_READ)   = 0
munmap(0xb77dd000, 136383)              = 0
set_tid_address(0xb7317948)             = 4138
set_robust_list(0xb7317950, 0xc)        = 0
futex(0xbf9cb5ac, FUTEX_WAIT_BITSET_PRIVATE|FUTEX_CLOCK_REALTIME, 1, NULL, b73178e0) = -1 EAGAIN (Resource temporarily unavailable)
rt_sigaction(SIGRTMIN, {0xb77c7530, [], SA_SIGINFO}, NULL, 8) = 0
rt_sigaction(SIGRT_1, {0xb77c75b0, [], SA_RESTART|SA_SIGINFO}, NULL, 8) = 0
rt_sigprocmask(SIG_UNBLOCK, [RTMIN RT_1], NULL, 8) = 0
getrlimit(RLIMIT_STACK, {rlim_cur=8192*1024, rlim_max=RLIM_INFINITY}) = 0
uname({sys="Linux", node="meade-arch", ...}) = 0
gettimeofday({1325181303, 609766}, NULL) = 0
gettimeofday({1325181303, 609797}, NULL) = 0
open("/sys/devices/system/cpu", O_RDONLY|O_NONBLOCK|O_LARGEFILE|O_DIRECTORY|O_CLOEXEC) = 3
brk(0)                                  = 0x9dd7000
brk(0x9e00000)                          = 0x9e00000
getdents64(3, /* 14 entries */, 32768)  = 432
getdents64(3, /* 0 entries */, 32768)   = 0
brk(0x9df8000)                          = 0x9df8000
close(3)                                = 0
open("/usr/lib/locale/locale-archive", O_RDONLY|O_LARGEFILE) = 3
fstat64(3, {st_mode=S_IFREG|0644, st_size=1852464, ...}) = 0
mmap2(NULL, 1852464, PROT_READ, MAP_PRIVATE, 3, 0) = 0xb7151000
close(3)                                = 0
futex(0xb7689d9c, FUTEX_WAKE_PRIVATE, 2147483647) = 0
futex(0xb7689890, FUTEX_WAKE_PRIVATE, 2147483647) = 0
lstat64("/usr", {st_mode=S_IFDIR|0755, st_size=4096, ...}) = 0
lstat64("/usr/lib", {st_mode=S_IFDIR|0755, st_size=102400, ...}) = 0
lstat64("/usr/lib/libreoffice", {st_mode=S_IFDIR|0755, st_size=4096, ...}) = 0
lstat64("/usr/lib/libreoffice/program", {st_mode=S_IFDIR|0755, st_size=4096, ...}) = 0
lstat64("/usr/lib/libreoffice/program/oosplash.bin", {st_mode=S_IFREG|0755, st_size=31336, ...}) = 0
rt_sigaction(SIGPIPE, {SIG_IGN, [PIPE], SA_RESTART}, {SIG_DFL, [], 0}, 8) = 0
lstat64("/usr", {st_mode=S_IFDIR|0755, st_size=4096, ...}) = 0
lstat64("/usr/lib", {st_mode=S_IFDIR|0755, st_size=102400, ...}) = 0
lstat64("/usr/lib/libreoffice", {st_mode=S_IFDIR|0755, st_size=4096, ...}) = 0
lstat64("/usr/lib/libreoffice/program", {st_mode=S_IFDIR|0755, st_size=4096, ...}) = 0
access("/usr/lib/libreoffice/program/bootstraprc", F_OK) = 0
futex(0xb7689c08, FUTEX_WAKE_PRIVATE, 2147483647) = 0
futex(0xb746e050, FUTEX_WAKE_PRIVATE, 2147483647) = 0
getcwd("/usr/lib/libreoffice/program", 4096) = 29
lstat64("/usr", {st_mode=S_IFDIR|0755, st_size=4096, ...}) = 0
lstat64("/usr", {st_mode=S_IFDIR|0755, st_size=4096, ...}) = 0
lstat64("/usr/lib", {st_mode=S_IFDIR|0755, st_size=102400, ...}) = 0
lstat64("/usr", {st_mode=S_IFDIR|0755, st_size=4096, ...}) = 0
lstat64("/usr/lib", {st_mode=S_IFDIR|0755, st_size=102400, ...}) = 0
lstat64("/usr/lib/libreoffice", {st_mode=S_IFDIR|0755, st_size=4096, ...}) = 0
lstat64("/usr", {st_mode=S_IFDIR|0755, st_size=4096, ...}) = 0
lstat64("/usr/lib", {st_mode=S_IFDIR|0755, st_size=102400, ...}) = 0
lstat64("/usr/lib/libreoffice", {st_mode=S_IFDIR|0755, st_size=4096, ...}) = 0
lstat64("/usr/lib/libreoffice/program", {st_mode=S_IFDIR|0755, st_size=4096, ...}) = 0
lstat64("/usr", {st_mode=S_IFDIR|0755, st_size=4096, ...}) = 0
lstat64("/usr/lib", {st_mode=S_IFDIR|0755, st_size=102400, ...}) = 0
lstat64("/usr/lib/libreoffice", {st_mode=S_IFDIR|0755, st_size=4096, ...}) = 0
lstat64("/usr/lib/libreoffice/program", {st_mode=S_IFDIR|0755, st_size=4096, ...}) = 0
lstat64("/usr/lib/libreoffice/program/oosplash.bin", {st_mode=S_IFREG|0755, st_size=31336, ...}) = 0
access("/usr/lib/libreoffice/program/oosplashrc", F_OK) = -1 ENOENT (No such file or directory)
open("/usr/lib/libreoffice/program/bootstraprc", O_RDONLY|O_LARGEFILE) = 3
fstat64(3, {st_mode=S_IFREG|0644, st_size=197, ...}) = 0
futex(0xb768a474, FUTEX_WAKE_PRIVATE, 2147483647) = 0
mmap2(NULL, 65536, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xb77ef000
mmap2(NULL, 65536, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xb77df000
mmap2(NULL, 65536, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xb7141000
mmap2(NULL, 8392704, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS|MAP_STACK, -1, 0) = 0xb6940000
mprotect(0xb6940000, 4096, PROT_NONE)   = 0
clone(child_stack=0xb7140484, flags=CLONE_VM|CLONE_FS|CLONE_FILES|CLONE_SIGHAND|CLONE_THREAD|CLONE_SYSVSEM|CLONE_SETTLS|CLONE_PARENT_SETTID|CLONE_CHILD_CLEARTID, parent_tidptr=0xb7140bd8, {entry_number:6, base_addr:0xb7140b70, limit:1048575, seg_32bit:1, contents:0, read_exec_only:0, limit_in_pages:1, seg_not_present:0, useable:1}, child_tidptr=0xb7140bd8) = 4148
futex(0xb7689efc, FUTEX_WAKE_PRIVATE, 2147483647) = 0
mmap2(NULL, 65536, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xb6930000
pread64(3, "[Bootstrap]\nBaseInstallation=${O"..., 4096, 0) = 197
close(3)                                = 0
getuid32()                              = 1000
socket(PF_FILE, SOCK_STREAM|SOCK_CLOEXEC|SOCK_NONBLOCK, 0) = 3
connect(3, {sa_family=AF_FILE, path="/var/run/nscd/socket"}, 110) = -1 ENOENT (No such file or directory)
close(3)                                = 0
socket(PF_FILE, SOCK_STREAM|SOCK_CLOEXEC|SOCK_NONBLOCK, 0) = 3
connect(3, {sa_family=AF_FILE, path="/var/run/nscd/socket"}, 110) = -1 ENOENT (No such file or directory)
close(3)                                = 0
open("/etc/nsswitch.conf", O_RDONLY)    = 3
fstat64(3, {st_mode=S_IFREG|0644, st_size=223, ...}) = 0
mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xb77de000
read(3, "# Begin /etc/nsswitch.conf\n\npass"..., 4096) = 223
read(3, "", 4096)                       = 0
close(3)                                = 0
munmap(0xb77de000, 4096)                = 0
open("/usr/lib/libreoffice/program/libnss_files.so.2", O_RDONLY) = -1 ENOENT (No such file or directory)
open("/usr/lib/libreoffice/program/../basis-link/program/libnss_files.so.2", O_RDONLY) = -1 ENOENT (No such file or directory)
open("/usr/lib/libreoffice/program/../basis-link/ure-link/lib/libnss_files.so.2", O_RDONLY) = -1 ENOENT (No such file or directory)
open("/etc/ld.so.cache", O_RDONLY)      = 3
fstat64(3, {st_mode=S_IFREG|0644, st_size=136383, ...}) = 0
mmap2(NULL, 136383, PROT_READ, MAP_PRIVATE, 3, 0) = 0xb690e000
close(3)                                = 0
open("/lib/libnss_files.so.2", O_RDONLY) = 3
read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\240\32\0\0004\0\0\0"..., 512) = 512
fstat64(3, {st_mode=S_IFREG|0755, st_size=46732, ...}) = 0
mmap2(NULL, 49868, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0xb6901000
mmap2(0xb690c000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0xa) = 0xb690c000
close(3)                                = 0
mprotect(0xb690c000, 4096, PROT_READ)   = 0
munmap(0xb690e000, 136383)              = 0
open("/etc/passwd", O_RDONLY|O_CLOEXEC) = 3
fstat64(3, {st_mode=S_IFREG|0644, st_size=566, ...}) = 0
mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xb692f000
read(3, "root:x:0:0:root:/root:/bin/bash\n"..., 4096) = 566
close(3)                                = 0
munmap(0xb692f000, 4096)                = 0
access("/home/andrew/.config", F_OK)    = 0
getcwd("/usr/lib/libreoffice/program", 4096) = 29
lstat64("/home", {st_mode=S_IFDIR|0755, st_size=4096, ...}) = 0
lstat64("/home", {st_mode=S_IFDIR|0755, st_size=4096, ...}) = 0
lstat64("/home/andrew", {st_mode=S_IFDIR|0700, st_size=4096, ...}) = 0
lstat64("/home", {st_mode=S_IFDIR|0755, st_size=4096, ...}) = 0
lstat64("/home/andrew", {st_mode=S_IFDIR|0700, st_size=4096, ...}) = 0
lstat64("/home/andrew/.config", {st_mode=S_IFDIR|0755, st_size=4096, ...}) = 0
lstat64("/home", {st_mode=S_IFDIR|0755, st_size=4096, ...}) = 0
lstat64("/home/andrew", {st_mode=S_IFDIR|0700, st_size=4096, ...}) = 0
lstat64("/home/andrew/.config", {st_mode=S_IFDIR|0755, st_size=4096, ...}) = 0
lstat64("/home/andrew/.config/.libreoffice", {st_mode=S_IFDIR|0755, st_size=4096, ...}) = 0
lstat64("/home", {st_mode=S_IFDIR|0755, st_size=4096, ...}) = 0
lstat64("/home/andrew", {st_mode=S_IFDIR|0700, st_size=4096, ...}) = 0
lstat64("/home/andrew/.config", {st_mode=S_IFDIR|0755, st_size=4096, ...}) = 0
lstat64("/home/andrew/.config/.libreoffice", {st_mode=S_IFDIR|0755, st_size=4096, ...}) = 0
lstat64("/home/andrew/.config/.libreoffice/3", {st_mode=S_IFDIR|0700, st_size=4096, ...}) = 0
access("/tmp", R_OK|W_OK)               = 0
getuid32()                              = 1000
socket(PF_FILE, SOCK_STREAM, 0)         = 3
fcntl64(3, F_SETFD, FD_CLOEXEC)         = 0
connect(3, {sa_family=AF_FILE, path="/tmp/OSL_PIPE_1000_SingleOfficeIPC_3aa528bb670a2cc4754b8e13ece3189"}, 110) = -1 ECONNREFUSED (Connection refused)
stat64("/proc/version", {st_mode=S_IFREG|0444, st_size=0, ...}) = 0
open("/usr/lib/libreoffice/program/edition/intro-en_US.png", O_RDONLY) = -1 ENOENT (No such file or directory)
open("/usr/lib/libreoffice/program/edition/intro.png", O_RDONLY) = -1 ENOENT (No such file or directory)
open("/usr/lib/libreoffice/program/intro-en_US.png", O_RDONLY) = -1 ENOENT (No such file or directory)
open("/usr/lib/libreoffice/program/intro.png", O_RDONLY) = 4
fstat64(4, {st_mode=S_IFREG|0644, st_size=31528, ...}) = 0
mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xb692f000
read(4, "\211PNG\r\n\32\n\0\0\0\rIHDR\0\0\2'\0\0\1n\10\6\0\0\0Z\357\270"..., 4096) = 4096
brk(0x9e19000)                          = 0x9e19000
brk(0x9e3a000)                          = 0x9e3a000
brk(0x9e5b000)                          = 0x9e5b000
brk(0x9e7c000)                          = 0x9e7c000
read(4, "\220\23\352e0\30\fF\204t\373\340\264F\361l$jKG\240$*\337.\201R\254\242$W0"..., 4096) = 4096
read(4, "{\16n\267[\17.UU\25\262,\343\347?\377y\332\231\251\223q\376\371\347\243\264\264\24\212\242\200"..., 4096) = 4096
read(4, "$\5L\323\327\247\212&P\264c\222\211\225lO\343\330\215S\202C\373\"U\201\242e\222\355\351\351"..., 4096) = 4096
read(4, "\332\342!\t\340\375@\33\327\2029\237\337\212\307?{\0?\250?\16\373\227\rBC\371\1(\361\4"..., 4096) = 4096
read(4, "\334\270\21<\317c\310\220!\0303f\f~\371\313_\242\274\274<\356\230\225+Wb\346\314\231\0\200"..., 4096) = 4096
read(4, "u\330\262eK\332\372{\364\350\201}\373\366a\327\256])W\322\244\322\277\177\177\214\0325\n\357\275"..., 4096) = 4096
read(4, "\"\353\3301\214\0\336\16$\322\272\263]\237\35B\211\300\210U2\322z|>\37rss\r\v("..., 4096) = 2856
access("/usr/lib/libreoffice/program/sofficerc", F_OK) = 0
access("/usr/lib/libreoffice/program/oosplashrc", F_OK) = -1 ENOENT (No such file or directory)
open("/usr/lib/libreoffice/program/sofficerc", O_RDONLY|O_LARGEFILE) = 5
fstat64(5, {st_mode=S_IFREG|0644, st_size=192, ...}) = 0
pread64(5, "[Bootstrap]\nHideEula=1\nLogo=1\nNa"..., 4096, 0) = 192
close(5)                                = 0
brk(0x9e9d000)                          = 0x9e9d000
socket(PF_FILE, SOCK_STREAM|SOCK_CLOEXEC, 0) = 5
connect(5, {sa_family=AF_FILE, path=@"/tmp/.X11-unix/X0"}, 20) = 0
getpeername(5, {sa_family=AF_FILE, path=@"/tmp/.X11-unix/X0"...}, [20]) = 0
uname({sys="Linux", node="meade-arch", ...}) = 0
access("/home/andrew/.Xauthority", R_OK) = 0
open("/home/andrew/.Xauthority", O_RDONLY) = 6
fstat64(6, {st_mode=S_IFREG|0600, st_size=0, ...}) = 0
mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xb692e000
read(6, "", 4096)                       = 0
close(6)                                = 0
munmap(0xb692e000, 4096)                = 0
fcntl64(5, F_GETFL)                     = 0x2 (flags O_RDWR)
fcntl64(5, F_SETFL, O_RDWR|O_NONBLOCK)  = 0
fcntl64(5, F_SETFD, FD_CLOEXEC)         = 0
poll([{fd=5, events=POLLIN|POLLOUT}], 1, -1) = 1 ([{fd=5, revents=POLLOUT}])
writev(5, [{"l\0\v\0\0\0\0\0\0\0\0\0", 12}, {"", 0}], 2) = 12
read(5, 0x9e7b8d8, 8)                   = -1 EAGAIN (Resource temporarily unavailable)
poll([{fd=5, events=POLLIN}], 1, -1)    = 1 ([{fd=5, revents=POLLIN}])
read(5, "\1\0\v\0\0\0+\2", 8)           = 8
read(5, "\30k\251\0\0\0`\2\377\377\37\0\0\1\0\0\24\0\377\377\1\7\0\0  \10\377\0\0\0\0"..., 2220) = 2220
poll([{fd=5, events=POLLIN|POLLOUT}], 1, -1) = 1 ([{fd=5, revents=POLLOUT}])
writev(5, [{"b\0\5\0\f\0\0\0BIG-REQUESTS", 20}], 1) = 20
poll([{fd=5, events=POLLIN}], 1, -1)    = 1 ([{fd=5, revents=POLLIN}])
read(5, "\1\0\1\0\0\0\0\0\1\221\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0", 4096) = 32
poll([{fd=5, events=POLLIN|POLLOUT}], 1, -1) = 1 ([{fd=5, revents=POLLOUT}])
writev(5, [{"\221\0\1\0", 4}], 1)       = 4
poll([{fd=5, events=POLLIN}], 1, -1)    = 1 ([{fd=5, revents=POLLIN}])
read(5, "\1\0\2\0\0\0\0\0\377\377?\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0", 4096) = 32
read(5, 0x9e7c410, 4096)                = -1 EAGAIN (Resource temporarily unavailable)
poll([{fd=5, events=POLLIN|POLLOUT}], 1, -1) = 1 ([{fd=5, revents=POLLOUT}])
writev(5, [{"7\0\5\0\0\0`\2Z\1\0\0\10\0\0\0\377\377\377\0\24\0\6\0Z\1\0\0\27\0\0\0"..., 44}, {NULL, 0}, {"", 0}], 3) = 44
poll([{fd=5, events=POLLIN}], 1, -1)    = 1 ([{fd=5, revents=POLLIN}])
read(5, "\1\10\4\0!\0\0\0\37\0\0\0\0\0\0\0\201\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 4096) = 164
read(5, 0x9e7c410, 4096)                = -1 EAGAIN (Resource temporarily unavailable)
poll([{fd=5, events=POLLIN|POLLOUT}], 1, -1) = 1 ([{fd=5, revents=POLLOUT}])
writev(5, [{"b\0\5\0\t\0`\2", 8}, {"XKEYBOARD", 9}, {"\0\0\0", 3}], 3) = 20
poll([{fd=5, events=POLLIN}], 1, -1)    = 1 ([{fd=5, revents=POLLIN}])
read(5, "\1\0\5\0\0\0\0\0\1\223w\250\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0", 4096) = 32
read(5, 0x9e7c410, 4096)                = -1 EAGAIN (Resource temporarily unavailable)
read(5, 0x9e7c410, 4096)                = -1 EAGAIN (Resource temporarily unavailable)
poll([{fd=5, events=POLLIN|POLLOUT}], 1, -1) = 1 ([{fd=5, revents=POLLOUT}])
writev(5, [{"\223\0\2\0\1\0\0\0", 8}, {NULL, 0}, {"", 0}], 3) = 8
poll([{fd=5, events=POLLIN}], 1, -1)    = 1 ([{fd=5, revents=POLLIN}])
read(5, "\1\1\6\0\0\0\0\0\1\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0", 4096) = 32
read(5, 0x9e7c410, 4096)                = -1 EAGAIN (Resource temporarily unavailable)
read(5, 0x9e7c410, 4096)                = -1 EAGAIN (Resource temporarily unavailable)
poll([{fd=5, events=POLLIN|POLLOUT}], 1, -1) = 1 ([{fd=5, revents=POLLOUT}])
writev(5, [{"\1\0\n\0\1\0`\2Z\1\0\0\354\3I\1'\2n\1\0\0\0\0\0\0\0\0\n\0\0\0"..., 72}, {NULL, 0}, {"", 0}], 3) = 72
poll([{fd=5, events=POLLIN}], 1, -1)    = 1 ([{fd=5, revents=POLLIN}])
read(5, "\1\1\t\0\0\0\0\0~~\252\252\27\27R\t\27\252~\0\4\0\0\0\0\0\0\0\370\216R\t", 4096) = 32
read(5, 0x9e7c410, 4096)                = -1 EAGAIN (Resource temporarily unavailable)
read(5, 0x9e7c410, 4096)                = -1 EAGAIN (Resource temporarily unavailable)
poll([{fd=5, events=POLLIN|POLLOUT}], 1, -1) = 1 ([{fd=5, revents=POLLOUT}])
writev(5, [{"T\0\4\0 \0\0\0\0\317\0\320\0\323I\1", 16}, {NULL, 0}, {"", 0}], 3) = 16
poll([{fd=5, events=POLLIN}], 1, -1)    = 1 ([{fd=5, revents=POLLIN}])
read(5, "\1\0\n\0\0\0\0\0\317\317\320\320\323\323R\t\323\320\317\0\0\0\0\0\0\0\0\0\370\216R\t", 4096) = 32
read(5, 0x9e7c410, 4096)                = -1 EAGAIN (Resource temporarily unavailable)
read(5, 0x9e7c410, 4096)                = -1 EAGAIN (Resource temporarily unavailable)
poll([{fd=5, events=POLLIN|POLLOUT}], 1, -1) = 1 ([{fd=5, revents=POLLOUT}])
writev(5, [{"7\0\4\0\2\0`\2\1\0`\2\0\0\0\0\22\0\n\0\1\0`\2'\0\0\0\37\0\0\0"..., 196}, {NULL, 0}, {"", 0}], 3) = 196
poll([{fd=5, events=POLLIN}], 1, -1)    = 1 ([{fd=5, revents=POLLIN}])
read(5, "\1\0\17\0\0\0\0\0#\1\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0", 4096) = 32
read(5, 0x9e7c410, 4096)                = -1 EAGAIN (Resource temporarily unavailable)
read(5, 0x9e7c410, 4096)                = -1 EAGAIN (Resource temporarily unavailable)
poll([{fd=5, events=POLLIN|POLLOUT}], 1, -1) = 1 ([{fd=5, revents=POLLOUT}])
writev(5, [{"\20\1\t\0\32\0`\2_NET_WM_WINDOW_TYPE_SPLA"..., 36}, {NULL, 0}, {"", 0}], 3) = 36
poll([{fd=5, events=POLLIN}], 1, -1)    = 1 ([{fd=5, revents=POLLIN}])
read(5, "\1\0\20\0\0\0\0\0_\1\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0", 4096) = 32
read(5, 0x9e7c410, 4096)                = -1 EAGAIN (Resource temporarily unavailable)
read(5, 0x9e7c410, 4096)                = -1 EAGAIN (Resource temporarily unavailable)
poll([{fd=5, events=POLLIN|POLLOUT}], 1, -1) = 1 ([{fd=5, revents=POLLOUT}])
writev(5, [{"\22\0\7\0\1\0`\2#\1\0\0\4\0\0\0 IND\1\0\0\0_\1\0\0\20\0\6\0"..., 52}, {NULL, 0}, {"", 0}], 3) = 52
poll([{fd=5, events=POLLIN}], 1, -1)    = 1 ([{fd=5, revents=POLLIN}])
read(5, "\1\0\22\0\0\0\0\0003\1\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0", 4096) = 32
read(5, 0x9e7c410, 4096)                = -1 EAGAIN (Resource temporarily unavailable)
read(5, 0x9e7c410, 4096)                = -1 EAGAIN (Resource temporarily unavailable)
mmap2(NULL, 806912, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xb683c000
poll([{fd=5, events=POLLIN|POLLOUT}], 1, -1) = 1 ([{fd=5, revents=POLLOUT}])
writev(5, [{"\22\0\v\0\1\0`\0023\1\0\0003\1\0\0 IND\5\0\0\0\17\0\0\0\2\0\0\0"..., 100}, {"\331\331\331\0\331\331\331\0\331\331\331\0\331\331\331\0\331\331\331\0\331\331\331\0\331\331\331\0\331\331\331\0"..., 260072}, {"", 0}], 3) = 113344
poll([{fd=5, events=POLLIN|POLLOUT}], 1, -1) = 1 ([{fd=5, revents=POLLOUT}])
writev(5, [{"\375\375\375\0\375\375\375\0\375\375\375\0\375\375\375\0\375\375\375\0\375\375\375\0\375\375\375\0\375\375\375\0"..., 146828}, {"", 0}], 2) = 146828
poll([{fd=5, events=POLLIN|POLLOUT}], 1, -1) = 1 ([{fd=5, revents=POLLOUT}])
writev(5, [{"H\2\0\376\3\0`\2\4\0`\2'\2v\0\0\0v\0\0\30\0\0", 24}, {"\331\331\331\0\372\372\372\0\372\372\372\0\372\372\372\0\372\372\372\0\373\373\373\0\373\373\373\0\373\373\373\0"..., 260072}, {"", 0}], 3) = 113344
poll([{fd=5, events=POLLIN|POLLOUT}], 1, -1) = 1 ([{fd=5, revents=POLLOUT}])
writev(5, [{"\325\325\325\000333\000333\0\233\233\233\0\377\377\377\0\377\377\377\0]]]\000333\0"..., 146752}, {"", 0}], 2) = 146752
poll([{fd=5, events=POLLIN|POLLOUT}], 1, -1) = 1 ([{fd=5, revents=POLLOUT}])
writev(5, [{"H\2\0\376\3\0`\2\4\0`\2'\2v\0\0\0\354\0\0\30\0\0", 24}, {"\331\331\331\0\377\377\377\0\377\377\377\0\377\377\377\0\377\377\377\0\377\377\377\0\377\377\377\0\377\377\377\0"..., 260072}, {"", 0}], 3) = 260096
poll([{fd=5, events=POLLIN|POLLOUT}], 1, -1) = 1 ([{fd=5, revents=POLLOUT}])
writev(5, [{"H\2\332\31\3\0`\2\4\0`\2'\2\f\0\0\0b\1\0\30\0\0", 24}, {"\331\331\331\0\364\364\364\0\364\364\364\0\364\364\364\0\364\364\364\0\364\364\364\0\364\364\364\0\364\364\364\0"..., 26448}, {"", 0}], 3) = 26472
munmap(0xb683c000, 806912)              = 0
poll([{fd=5, events=POLLIN|POLLOUT}], 1, -1) = 1 ([{fd=5, revents=POLLOUT}])
writev(5, [{"\2\2\4\0\1\0`\2\1\0\0\0\3\0`\2<\0\2\0\4\0`\0026\0\2\0\3\0`\2"..., 128}, {NULL, 0}, {"", 0}], 3) = 128
read(5, 0x9e7c410, 4096)                = -1 EAGAIN (Resource temporarily unavailable)
read(5, 0x9e7c410, 4096)                = -1 EAGAIN (Resource temporarily unavailable)
open("@/usr/lib/libreoffice/program/../basis-link/program/pagein-common", O_RDONLY) = -1 ENOENT (No such file or directory)
open("/usr/lib/libreoffice/program/../basis-link/program/pagein-common", O_RDONLY) = 6
fstat64(6, {st_mode=S_IFREG|0644, st_size=1023, ...}) = 0
mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xb77de000
read(6, "i18npool.uno.so\nliblngli.so\nlibx"..., 4096) = 1023
open("/usr/lib/libreoffice/program/../basis-link/program/i18npool.uno.so", O_RDONLY) = 7
fstat64(7, {st_mode=S_IFREG|0644, st_size=1546940, ...}) = 0
mmap2(NULL, 1546940, PROT_READ, MAP_PRIVATE, 7, 0) = 0xb6787000
close(7)                                = 0
madvise(0xb6787000, 1546940, MADV_WILLNEED) = 0
munmap(0xb6787000, 1546940)             = 0
open("/usr/lib/libreoffice/program/../basis-link/program/liblngli.so", O_RDONLY) = 7
fstat64(7, {st_mode=S_IFREG|0644, st_size=563336, ...}) = 0
mmap2(NULL, 563336, PROT_READ, MAP_PRIVATE, 7, 0) = 0xb6877000
close(7)                                = 0
madvise(0xb6877000, 563336, MADV_WILLNEED) = 0
munmap(0xb6877000, 563336)              = 0
open("/usr/lib/libreoffice/program/../basis-link/program/libxoli.so", O_RDONLY) = 7
fstat64(7, {st_mode=S_IFREG|0644, st_size=3734124, ...}) = 0
mmap2(NULL, 3734124, PROT_READ, MAP_PRIVATE, 7, 0) = 0xb6571000
close(7)                                = 0
madvise(0xb6571000, 3734124, MADV_WILLNEED) = 0
munmap(0xb6571000, 3734124)             = 0
open("/usr/lib/libreoffice/program/../basis-link/program/libfweli.so", O_RDONLY) = 7
fstat64(7, {st_mode=S_IFREG|0644, st_size=587808, ...}) = 0
mmap2(NULL, 587808, PROT_READ, MAP_PRIVATE, 7, 0) = 0xb6871000
close(7)                                = 0
madvise(0xb6871000, 587808, MADV_WILLNEED) = 0
munmap(0xb6871000, 587808)              = 0
open("/usr/lib/libreoffice/program/../basis-link/program/libfwkli.so", O_RDONLY) = 7
fstat64(7, {st_mode=S_IFREG|0644, st_size=2286784, ...}) = 0
mmap2(NULL, 2286784, PROT_READ, MAP_PRIVATE, 7, 0) = 0xb66d2000
close(7)                                = 0
madvise(0xb66d2000, 2286784, MADV_WILLNEED) = 0
munmap(0xb66d2000, 2286784)             = 0
open("/usr/lib/libreoffice/program/../basis-link/program/libfwili.so", O_RDONLY) = 7
fstat64(7, {st_mode=S_IFREG|0644, st_size=163324, ...}) = 0
mmap2(NULL, 163324, PROT_READ, MAP_PRIVATE, 7, 0) = 0xb68d9000
close(7)                                = 0
madvise(0xb68d9000, 163324, MADV_WILLNEED) = 0
munmap(0xb68d9000, 163324)              = 0
open("/usr/lib/libreoffice/program/../basis-link/program/libfwlli.so", O_RDONLY) = 7
fstat64(7, {st_mode=S_IFREG|0644, st_size=363084, ...}) = 0
mmap2(NULL, 363084, PROT_READ, MAP_PRIVATE, 7, 0) = 0xb68a8000
close(7)                                = 0
madvise(0xb68a8000, 363084, MADV_WILLNEED) = 0
munmap(0xb68a8000, 363084)              = 0
open("/usr/lib/libreoffice/program/../basis-link/program/libpackage2.so", O_RDONLY) = 7
fstat64(7, {st_mode=S_IFREG|0644, st_size=376328, ...}) = 0
mmap2(NULL, 376328, PROT_READ, MAP_PRIVATE, 7, 0) = 0xb68a5000
close(7)                                = 0
madvise(0xb68a5000, 376328, MADV_WILLNEED) = 0
munmap(0xb68a5000, 376328)              = 0
open("/usr/lib/libreoffice/program/../basis-link/program/libucpfile1.so", O_RDONLY) = 7
fstat64(7, {st_mode=S_IFREG|0644, st_size=319952, ...}) = 0
mmap2(NULL, 319952, PROT_READ, MAP_PRIVATE, 7, 0) = 0xb68b2000
close(7)                                = 0
madvise(0xb68b2000, 319952, MADV_WILLNEED) = 0
munmap(0xb68b2000, 319952)              = 0
open("/usr/lib/libreoffice/program/../basis-link/program/libucb1.so", O_RDONLY) = 7
fstat64(7, {st_mode=S_IFREG|0644, st_size=239828, ...}) = 0
mmap2(NULL, 239828, PROT_READ, MAP_PRIVATE, 7, 0) = 0xb68c6000
close(7)                                = 0
madvise(0xb68c6000, 239828, MADV_WILLNEED) = 0
munmap(0xb68c6000, 239828)              = 0
open("/usr/lib/libreoffice/program/../basis-link/program/configmgr.uno.so", O_RDONLY) = 7
fstat64(7, {st_mode=S_IFREG|0644, st_size=449148, ...}) = 0
mmap2(NULL, 449148, PROT_READ, MAP_PRIVATE, 7, 0) = 0xb6893000
close(7)                                = 0
madvise(0xb6893000, 449148, MADV_WILLNEED) = 0
munmap(0xb6893000, 449148)              = 0
open("/usr/lib/libreoffice/program/../basis-link/program/libvclplug_genli.so", O_RDONLY) = 7
fstat64(7, {st_mode=S_IFREG|0644, st_size=793708, ...}) = 0
mmap2(NULL, 793708, PROT_READ, MAP_PRIVATE, 7, 0) = 0xb683f000
close(7)                                = 0
madvise(0xb683f000, 793708, MADV_WILLNEED) = 0
munmap(0xb683f000, 793708)              = 0
open("/usr/lib/libreoffice/program/../basis-link/program/libvclplug_gtkli.so", O_RDONLY) = 7
fstat64(7, {st_mode=S_IFREG|0644, st_size=334584, ...}) = 0
mmap2(NULL, 334584, PROT_READ, MAP_PRIVATE, 7, 0) = 0xb68af000
close(7)                                = 0
madvise(0xb68af000, 334584, MADV_WILLNEED) = 0
munmap(0xb68af000, 334584)              = 0
open("/usr/lib/libreoffice/program/../basis-link/program/libbasegfxli.so", O_RDONLY) = 7
fstat64(7, {st_mode=S_IFREG|0644, st_size=598064, ...}) = 0
mmap2(NULL, 598064, PROT_READ, MAP_PRIVATE, 7, 0) = 0xb686e000
close(7)                                = 0
madvise(0xb686e000, 598064, MADV_WILLNEED) = 0
munmap(0xb686e000, 598064)              = 0
open("/usr/lib/libreoffice/program/../basis-link/program/libsotli.so", O_RDONLY) = 7
fstat64(7, {st_mode=S_IFREG|0644, st_size=347860, ...}) = 0
mmap2(NULL, 347860, PROT_READ, MAP_PRIVATE, 7, 0) = 0xb68ac000
close(7)                                = 0
madvise(0xb68ac000, 347860, MADV_WILLNEED) = 0
munmap(0xb68ac000, 347860)              = 0
open("/usr/lib/libreoffice/program/../basis-link/program/libxcrli.so", O_RDONLY) = 7
fstat64(7, {st_mode=S_IFREG|0644, st_size=569856, ...}) = 0
mmap2(NULL, 569856, PROT_READ, MAP_PRIVATE, 7, 0) = 0xb6875000
close(7)                                = 0
madvise(0xb6875000, 569856, MADV_WILLNEED) = 0
munmap(0xb6875000, 569856)              = 0
open("/usr/lib/libreoffice/program/../basis-link/program/libsbli.so", O_RDONLY) = 7
fstat64(7, {st_mode=S_IFREG|0644, st_size=1698320, ...}) = 0
mmap2(NULL, 1698320, PROT_READ, MAP_PRIVATE, 7, 0) = 0xb6762000
close(7)                                = 0
madvise(0xb6762000, 1698320, MADV_WILLNEED) = 0
munmap(0xb6762000, 1698320)             = 0
open("/usr/lib/libreoffice/program/../basis-link/program/../ure-link/lib/stocservices.uno.so", O_RDONLY) = 7
fstat64(7, {st_mode=S_IFREG|0644, st_size=107604, ...}) = 0
mmap2(NULL, 107604, PROT_READ, MAP_PRIVATE, 7, 0) = 0xb68e6000
close(7)                                = 0
madvise(0xb68e6000, 107604, MADV_WILLNEED) = 0
munmap(0xb68e6000, 107604)              = 0
open("/usr/lib/libreoffice/program/../basis-link/program/../ure-link/lib/bootstrap.uno.so", O_RDONLY) = 7
fstat64(7, {st_mode=S_IFREG|0644, st_size=634504, ...}) = 0
mmap2(NULL, 634504, PROT_READ, MAP_PRIVATE, 7, 0) = 0xb6866000
close(7)                                = 0
madvise(0xb6866000, 634504, MADV_WILLNEED) = 0
munmap(0xb6866000, 634504)              = 0
open("/usr/lib/libreoffice/program/../basis-link/program/../ure-link/lib/libreg.so.3", O_RDONLY) = 7
fstat64(7, {st_mode=S_IFREG|0644, st_size=112888, ...}) = 0
mmap2(NULL, 112888, PROT_READ, MAP_PRIVATE, 7, 0) = 0xb68e5000
close(7)                                = 0
madvise(0xb68e5000, 112888, MADV_WILLNEED) = 0
munmap(0xb68e5000, 112888)              = 0
open("/usr/lib/libreoffice/program/../basis-link/program/../ure-link/lib/libstore.so.3", O_RDONLY) = 7
fstat64(7, {st_mode=S_IFREG|0644, st_size=85988, ...}) = 0
mmap2(NULL, 85988, PROT_READ, MAP_PRIVATE, 7, 0) = 0xb691a000
close(7)                                = 0
madvise(0xb691a000, 85988, MADV_WILLNEED) = 0
munmap(0xb691a000, 85988)               = 0
open("/usr/lib/libreoffice/program/../basis-link/program/../ure-link/lib/reflection.uno.so", O_RDONLY) = 7
fstat64(7, {st_mode=S_IFREG|0644, st_size=112904, ...}) = 0
mmap2(NULL, 112904, PROT_READ, MAP_PRIVATE, 7, 0) = 0xb6913000
close(7)                                = 0
madvise(0xb6913000, 112904, MADV_WILLNEED) = 0
munmap(0xb6913000, 112904)              = 0
open("/usr/lib/libreoffice/program/../basis-link/program/../ure-link/lib/libuno_cppuhelpergcc3.so.3", O_RDONLY) = 7
fstat64(7, {st_mode=S_IFREG|0644, st_size=567572, ...}) = 0
mmap2(NULL, 567572, PROT_READ, MAP_PRIVATE, 7, 0) = 0xb6876000
close(7)                                = 0
madvise(0xb6876000, 567572, MADV_WILLNEED) = 0
munmap(0xb6876000, 567572)              = 0
open("/usr/lib/libreoffice/program/../basis-link/program/../ure-link/lib/libuno_cppu.so.3", O_RDONLY) = 7
fstat64(7, {st_mode=S_IFREG|0644, st_size=252700, ...}) = 0
mmap2(NULL, 252700, PROT_READ, MAP_PRIVATE, 7, 0) = 0xb68c3000
close(7)                                = 0
madvise(0xb68c3000, 252700, MADV_WILLNEED) = 0
munmap(0xb68c3000, 252700)              = 0
open("/usr/lib/libreoffice/program/../basis-link/program/../ure-link/lib/libuno_sal.so.3", O_RDONLY) = 7
fstat64(7, {st_mode=S_IFREG|0644, st_size=340072, ...}) = 0
mmap2(NULL, 340072, PROT_READ, MAP_PRIVATE, 7, 0) = 0xb68ad000
close(7)                                = 0
madvise(0xb68ad000, 340072, MADV_WILLNEED) = 0
munmap(0xb68ad000, 340072)              = 0
open("/usr/lib/libreoffice/program/../basis-link/program/libucbhelper4gcc3.so", O_RDONLY) = 7
fstat64(7, {st_mode=S_IFREG|0644, st_size=420884, ...}) = 0
mmap2(NULL, 420884, PROT_READ, MAP_PRIVATE, 7, 0) = 0xb689a000
close(7)                                = 0
madvise(0xb689a000, 420884, MADV_WILLNEED) = 0
munmap(0xb689a000, 420884)              = 0
open("/usr/lib/libreoffice/program/../basis-link/program/libcomphelpgcc3.so", O_RDONLY) = 7
fstat64(7, {st_mode=S_IFREG|0644, st_size=1238052, ...}) = 0
mmap2(NULL, 1238052, PROT_READ, MAP_PRIVATE, 7, 0) = 0xb67d2000
close(7)                                = 0
madvise(0xb67d2000, 1238052, MADV_WILLNEED) = 0
munmap(0xb67d2000, 1238052)             = 0
open("/usr/lib/libreoffice/program/../basis-link/program/libtlli.so", O_RDONLY) = 7
fstat64(7, {st_mode=S_IFREG|0644, st_size=695948, ...}) = 0
mmap2(NULL, 695948, PROT_READ, MAP_PRIVATE, 7, 0) = 0xb6857000
close(7)                                = 0
madvise(0xb6857000, 695948, MADV_WILLNEED) = 0
munmap(0xb6857000, 695948)              = 0
open("/usr/lib/libreoffice/program/../basis-link/program/libutlli.so", O_RDONLY) = 7
fstat64(7, {st_mode=S_IFREG|0644, st_size=1122356, ...}) = 0
mmap2(NULL, 1122356, PROT_READ, MAP_PRIVATE, 7, 0) = 0xb67ee000
close(7)                                = 0
madvise(0xb67ee000, 1122356, MADV_WILLNEED) = 0
munmap(0xb67ee000, 1122356)             = 0
open("/usr/lib/libreoffice/program/../basis-link/program/libsvlli.so", O_RDONLY) = 7
fstat64(7, {st_mode=S_IFREG|0644, st_size=1017896, ...}) = 0
mmap2(NULL, 1017896, PROT_READ, MAP_PRIVATE, 7, 0) = 0xb6808000
close(7)                                = 0
madvise(0xb6808000, 1017896, MADV_WILLNEED) = 0
munmap(0xb6808000, 1017896)             = 0
open("/usr/lib/libreoffice/program/../basis-link/program/libvclli.so", O_RDONLY) = 7
fstat64(7, {st_mode=S_IFREG|0644, st_size=4408116, ...}) = 0
mmap2(NULL, 4408116, PROT_READ, MAP_PRIVATE, 7, 0) = 0xb64cc000
close(7)                                = 0
madvise(0xb64cc000, 4408116, MADV_WILLNEED) = 0
munmap(0xb64cc000, 4408116)             = 0
open("/usr/lib/libreoffice/program/../basis-link/program/libtkli.so", O_RDONLY) = 7
fstat64(7, {st_mode=S_IFREG|0644, st_size=3231804, ...}) = 0
mmap2(NULL, 3231804, PROT_READ, MAP_PRIVATE, 7, 0) = 0xb65eb000
close(7)                                = 0
madvise(0xb65eb000, 3231804, MADV_WILLNEED) = 0
munmap(0xb65eb000, 3231804)             = 0
open("/usr/lib/libreoffice/program/../basis-link/program/../ure-link/share/misc/types.rdb", O_RDONLY) = 7
fstat64(7, {st_mode=S_IFREG|0644, st_size=831488, ...}) = 0
mmap2(NULL, 831488, PROT_READ, MAP_PRIVATE, 7, 0) = 0xb6836000
close(7)                                = 0
madvise(0xb6836000, 831488, MADV_WILLNEED) = 0
munmap(0xb6836000, 831488)              = 0
open("/usr/lib/libreoffice/program/../basis-link/program/services.rdb", O_RDONLY) = 7
fstat64(7, {st_mode=S_IFREG|0644, st_size=177863, ...}) = 0
mmap2(NULL, 177863, PROT_READ, MAP_PRIVATE, 7, 0) = 0xb68d5000
close(7)                                = 0
madvise(0xb68d5000, 177863, MADV_WILLNEED) = 0
munmap(0xb68d5000, 177863)              = 0
open("/usr/lib/libreoffice/program/../basis-link/program/oovbaapi.rdb", O_RDONLY) = 7
fstat64(7, {st_mode=S_IFREG|0644, st_size=2039296, ...}) = 0
mmap2(NULL, 2039296, PROT_READ, MAP_PRIVATE, 7, 0) = 0xb670f000
close(7)                                = 0
madvise(0xb670f000, 2039296, MADV_WILLNEED) = 0
munmap(0xb670f000, 2039296)             = 0
open("/usr/lib/libreoffice/program/../basis-link/program/deploymentli.uno.so", O_RDONLY) = 7
fstat64(7, {st_mode=S_IFREG|0644, st_size=653344, ...}) = 0
mmap2(NULL, 653344, PROT_READ, MAP_PRIVATE, 7, 0) = 0xb6861000
close(7)                                = 0
madvise(0xb6861000, 653344, MADV_WILLNEED) = 0
munmap(0xb6861000, 653344)              = 0
open("/usr/lib/libreoffice/program/../basis-link/program/libdeploymentmiscli.so", O_RDONLY) = 7
fstat64(7, {st_mode=S_IFREG|0644, st_size=139468, ...}) = 0
mmap2(NULL, 139468, PROT_READ, MAP_PRIVATE, 7, 0) = 0xb68de000
close(7)                                = 0
madvise(0xb68de000, 139468, MADV_WILLNEED) = 0
munmap(0xb68de000, 139468)              = 0
open("/usr/lib/libreoffice/program/../basis-link/program/libucb1.so", O_RDONLY) = 7
fstat64(7, {st_mode=S_IFREG|0644, st_size=239828, ...}) = 0
mmap2(NULL, 239828, PROT_READ, MAP_PRIVATE, 7, 0) = 0xb68c6000
close(7)                                = 0
madvise(0xb68c6000, 239828, MADV_WILLNEED) = 0
munmap(0xb68c6000, 239828)              = 0
open("/usr/lib/libreoffice/program/../basis-link/program/libxstor.so", O_RDONLY) = 7
fstat64(7, {st_mode=S_IFREG|0644, st_size=542692, ...}) = 0
mmap2(NULL, 542692, PROT_READ, MAP_PRIVATE, 7, 0) = 0xb687c000
close(7)                                = 0
madvise(0xb687c000, 542692, MADV_WILLNEED) = 0
munmap(0xb687c000, 542692)              = 0
open("/usr/lib/libreoffice/program/../basis-link/program/libpackage2.so", O_RDONLY) = 7
fstat64(7, {st_mode=S_IFREG|0644, st_size=376328, ...}) = 0
mmap2(NULL, 376328, PROT_READ, MAP_PRIVATE, 7, 0) = 0xb68a5000
close(7)                                = 0
madvise(0xb68a5000, 376328, MADV_WILLNEED) = 0
munmap(0xb68a5000, 376328)              = 0
open("/usr/lib/libreoffice/program/../basis-link/program/libfilterconfig1.so", O_RDONLY) = 7
fstat64(7, {st_mode=S_IFREG|0644, st_size=230140, ...}) = 0
mmap2(NULL, 230140, PROT_READ, MAP_PRIVATE, 7, 0) = 0xb68c8000
close(7)                                = 0
madvise(0xb68c8000, 230140, MADV_WILLNEED) = 0
munmap(0xb68c8000, 230140)              = 0
open("/usr/lib/libreoffice/program/../basis-link/program/libuuili.so", O_RDONLY) = 7
fstat64(7, {st_mode=S_IFREG|0644, st_size=277424, ...}) = 0
mmap2(NULL, 277424, PROT_READ, MAP_PRIVATE, 7, 0) = 0xb68bd000
close(7)                                = 0
madvise(0xb68bd000, 277424, MADV_WILLNEED) = 0
munmap(0xb68bd000, 277424)              = 0
open("/usr/lib/libreoffice/program/../basis-link/program/liblngli.so", O_RDONLY) = 7
fstat64(7, {st_mode=S_IFREG|0644, st_size=563336, ...}) = 0
mmap2(NULL, 563336, PROT_READ, MAP_PRIVATE, 7, 0) = 0xb6877000
close(7)                                = 0
madvise(0xb6877000, 563336, MADV_WILLNEED) = 0
munmap(0xb6877000, 563336)              = 0
open("/usr/lib/libreoffice/program/../basis-link/program/libsvtli.so", O_RDONLY) = 7
fstat64(7, {st_mode=S_IFREG|0644, st_size=4054992, ...}) = 0
mmap2(NULL, 4054992, PROT_READ, MAP_PRIVATE, 7, 0) = 0xb6523000
close(7)                                = 0
madvise(0xb6523000, 4054992, MADV_WILLNEED) = 0
munmap(0xb6523000, 4054992)             = 0
open("/usr/lib/libreoffice/program/../basis-link/program/libsplli.so", O_RDONLY) = 7
fstat64(7, {st_mode=S_IFREG|0644, st_size=122412, ...}) = 0
mmap2(NULL, 122412, PROT_READ, MAP_PRIVATE, 7, 0) = 0xb68e3000
close(7)                                = 0
madvise(0xb68e3000, 122412, MADV_WILLNEED) = 0
munmap(0xb68e3000, 122412)              = 0
open("/usr/lib/libreoffice/program/../basis-link/program/libbasegfxli.so", O_RDONLY) = 7
fstat64(7, {st_mode=S_IFREG|0644, st_size=598064, ...}) = 0
mmap2(NULL, 598064, PROT_READ, MAP_PRIVATE, 7, 0) = 0xb686e000
close(7)                                = 0
madvise(0xb686e000, 598064, MADV_WILLNEED) = 0
munmap(0xb686e000, 598064)              = 0
open("/usr/lib/libreoffice/program/../basis-link/program/libavmediali.so", O_RDONLY) = 7
fstat64(7, {st_mode=S_IFREG|0644, st_size=175412, ...}) = 0
mmap2(NULL, 175412, PROT_READ, MAP_PRIVATE, 7, 0) = 0xb68d6000
close(7)                                = 0
madvise(0xb68d6000, 175412, MADV_WILLNEED) = 0
munmap(0xb68d6000, 175412)              = 0
open("/usr/lib/libreoffice/program/../basis-link/program/libhelplinkerli.so", O_RDONLY) = 7
fstat64(7, {st_mode=S_IFREG|0644, st_size=74608, ...}) = 0
mmap2(NULL, 74608, PROT_READ, MAP_PRIVATE, 7, 0) = 0xb68ee000
close(7)                                = 0
madvise(0xb68ee000, 74608, MADV_WILLNEED) = 0
munmap(0xb68ee000, 74608)               = 0
open("/usr/lib/libreoffice/program/../basis-link/program/libvclplug_genli.so", O_RDONLY) = 7
fstat64(7, {st_mode=S_IFREG|0644, st_size=793708, ...}) = 0
mmap2(NULL, 793708, PROT_READ, MAP_PRIVATE, 7, 0) = 0xb683f000
close(7)                                = 0
madvise(0xb683f000, 793708, MADV_WILLNEED) = 0
munmap(0xb683f000, 793708)              = 0
open("/usr/lib/libreoffice/program/../basis-link/program/libicule.so.48", O_RDONLY) = -1 ENOENT (No such file or directory)
open("/usr/lib/libreoffice/program/../basis-link/program/sax.uno.so", O_RDONLY) = 7
fstat64(7, {st_mode=S_IFREG|0644, st_size=94924, ...}) = 0
mmap2(NULL, 94924, PROT_READ, MAP_PRIVATE, 7, 0) = 0xb68e9000
close(7)                                = 0
madvise(0xb68e9000, 94924, MADV_WILLNEED) = 0
munmap(0xb68e9000, 94924)               = 0
open("/usr/lib/libreoffice/program/../basis-link/program/gconfbe1.uno.so", O_RDONLY) = 7
fstat64(7, {st_mode=S_IFREG|0644, st_size=36800, ...}) = 0
mmap2(NULL, 36800, PROT_READ, MAP_PRIVATE, 7, 0) = 0xb68f8000
close(7)                                = 0
madvise(0xb68f8000, 36800, MADV_WILLNEED) = 0
munmap(0xb68f8000, 36800)               = 0
open("/usr/lib/libreoffice/program/../basis-link/program/fsstorage.uno.so", O_RDONLY) = 7
fstat64(7, {st_mode=S_IFREG|0644, st_size=115884, ...}) = 0
mmap2(NULL, 115884, PROT_READ, MAP_PRIVATE, 7, 0) = 0xb68e4000
close(7)                                = 0
madvise(0xb68e4000, 115884, MADV_WILLNEED) = 0
munmap(0xb68e4000, 115884)              = 0
open("/usr/lib/libreoffice/program/../basis-link/program/desktopbe1.uno.so", O_RDONLY) = 7
fstat64(7, {st_mode=S_IFREG|0644, st_size=20192, ...}) = 0
mmap2(NULL, 20192, PROT_READ, MAP_PRIVATE, 7, 0) = 0xb68fc000
close(7)                                = 0
madvise(0xb68fc000, 20192, MADV_WILLNEED) = 0
munmap(0xb68fc000, 20192)               = 0
open("/usr/lib/libreoffice/program/../basis-link/program/localebe1.uno.so", O_RDONLY) = 7
fstat64(7, {st_mode=S_IFREG|0644, st_size=19752, ...}) = 0
mmap2(NULL, 19752, PROT_READ, MAP_PRIVATE, 7, 0) = 0xb68fc000
close(7)                                = 0
madvise(0xb68fc000, 19752, MADV_WILLNEED) = 0
munmap(0xb68fc000, 19752)               = 0
open("/usr/lib/libreoffice/program/../basis-link/program/ucpexpand1.uno.so", O_RDONLY) = 7
fstat64(7, {st_mode=S_IFREG|0644, st_size=20116, ...}) = 0
mmap2(NULL, 20116, PROT_READ, MAP_PRIVATE, 7, 0) = 0xb68fc000
close(7)                                = 0
madvise(0xb68fc000, 20116, MADV_WILLNEED) = 0
munmap(0xb68fc000, 20116)               = 0
open("/usr/lib/libreoffice/program/../basis-link/program/libsfxli.so", O_RDONLY) = 7
fstat64(7, {st_mode=S_IFREG|0644, st_size=3843648, ...}) = 0
mmap2(NULL, 3843648, PROT_READ, MAP_PRIVATE, 7, 0) = 0xb6556000
close(7)                                = 0
madvise(0xb6556000, 3843648, MADV_WILLNEED) = 0
munmap(0xb6556000, 3843648)             = 0
open("/usr/lib/libreoffice/program/../basis-link/program/libsofficeapp.so", O_RDONLY) = 7
fstat64(7, {st_mode=S_IFREG|0644, st_size=388856, ...}) = 0
mmap2(NULL, 388856, PROT_READ, MAP_PRIVATE, 7, 0) = 0xb68a2000
close(7)                                = 0
madvise(0xb68a2000, 388856, MADV_WILLNEED) = 0
munmap(0xb68a2000, 388856)              = 0
read(6, "", 4096)                       = 0
close(6)                                = 0
munmap(0xb77de000, 4096)                = 0
mmap2(NULL, 8392704, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS|MAP_STACK, -1, 0) = 0xb6100000
mprotect(0xb6100000, 4096, PROT_NONE)   = 0
clone(child_stack=0xb6900484, flags=CLONE_VM|CLONE_FS|CLONE_FILES|CLONE_SIGHAND|CLONE_THREAD|CLONE_SYSVSEM|CLONE_SETTLS|CLONE_PARENT_SETTID|CLONE_CHILD_CLEARTID, parent_tidptr=0xb6900bd8, {entry_number:6, base_addr:0xb6900b70, limit:1048575, seg_32bit:1, contents:0, read_exec_only:0, limit_in_pages:1, seg_not_present:0, useable:1}, child_tidptr=0xb6900bd8) = 4149
futex(0x9e87074, FUTEX_WAIT_PRIVATE, 1, NULL) = 0
futex(0x9e87058, FUTEX_WAIT_PRIVATE, 2, NULL) = 0
futex(0x9e87058, FUTEX_WAKE_PRIVATE, 1) = 0
futex(0x9e86ffc, FUTEX_WAIT_PRIVATE, 1, NULL) = 0
futex(0x9e87028, FUTEX_WAKE_PRIVATE, 1) = 0
read(8, "/usr/lib/jvm/java-7-openjdk/jre/"..., 4096) = 193
pipe([6, 7])                            = 0
mmap2(NULL, 8392704, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS|MAP_STACK, -1, 0) = 0xb58ff000
mprotect(0xb58ff000, 4096, PROT_NONE)   = 0
clone(child_stack=0xb60ff484, flags=CLONE_VM|CLONE_FS|CLONE_FILES|CLONE_SIGHAND|CLONE_THREAD|CLONE_SYSVSEM|CLONE_SETTLS|CLONE_PARENT_SETTID|CLONE_CHILD_CLEARTID, parent_tidptr=0xb60ffbd8, {entry_number:6, base_addr:0xb60ffb70, limit:1048575, seg_32bit:1, contents:0, read_exec_only:0, limit_in_pages:1, seg_not_present:0, useable:1}, child_tidptr=0xb60ffbd8) = 4152
futex(0x9e86df8, FUTEX_WAKE_PRIVATE, 1) = 1
futex(0x9e86e14, FUTEX_WAIT_PRIVATE, 1, NULL) = -1 EAGAIN (Resource temporarily unavailable)
futex(0x9e86df8, FUTEX_WAKE_PRIVATE, 1) = 0
futex(0x9e87214, FUTEX_WAIT_PRIVATE, 1, NULL) = 0
futex(0x9e87240, FUTEX_WAKE_PRIVATE, 1) = 0
close(7)                                = 0
gettimeofday({1325181304, 181614}, NULL) = 0
clock_gettime(CLOCK_REALTIME, {1325181304, 181641919}) = 0
futex(0x9e871c4, FUTEX_WAIT_PRIVATE, 1, {0, 249972081}) = -1 ETIMEDOUT (Connection timed out)
futex(0x9e871f0, FUTEX_WAKE_PRIVATE, 1) = 0
poll([{fd=5, events=POLLIN|POLLOUT}], 1, -1) = 1 ([{fd=5, revents=POLLOUT}])
writev(5, [{"8\2\4\0\2\0`\2\4\0\0\0\323\320\317\0C\0\5\0\1\0`\2\2\0`\2\244\0\341\0"..., 72}, {NULL, 0}, {"", 0}], 3) = 72
read(5, 0x9e7c410, 4096)                = -1 EAGAIN (Resource temporarily unavailable)
read(5, 0x9e7c410, 4096)                = -1 EAGAIN (Resource temporarily unavailable)
read(6, "10%\n", 255)                   = 4
gettimeofday({1325181304, 435816}, NULL) = 0
clock_gettime(CLOCK_REALTIME, {1325181304, 435842658}) = 0
futex(0x9e871c4, FUTEX_WAIT_PRIVATE, 3, {0, 249973342}) = 0
futex(0x9e871f0, FUTEX_WAKE_PRIVATE, 1) = 0
close(6)                                = 0
futex(0xb768a064, FUTEX_WAKE_OP_PRIVATE, 1, 1, 0xb768a060, {FUTEX_OP_SET, 0, FUTEX_OP_CMP_GT, 1}) = 1
futex(0xb7140bd8, FUTEX_WAIT, 4148, NULL) = 0
munmap(0xb6930000, 65536)               = 0
exit_group(0)                           = ?

I have no idea what I'm looking at.

toad · 2011-12-29 18:35:28

Bah, neither do I I parsed the output for error messages but no joy.

I'd try to rename ~/.config/.libreoffice and have LO start anew. You've tried it as root (never a good idea BTW and you may even provoke permission probs) but a new user is always preferable.

I'm also on KDE and here are my LO packages (if it is any help):

toad@deskarch 976\64 ~ > pacman -Qe |grep office
koffice-krita 2.3.3-11
libreoffice-en-GB 3.4.4-1
libreoffice-extension-google-docs 3.4.4-4
libreoffice-extension-pdfimport 3.4.4-4
libreoffice-extension-typo 3.4.4-4
libreoffice-gnome 3.4.4-4

RossAnder · 2012-04-09 08:44:05

toad wrote:

Bah, neither do I I parsed the output for error messages but no joy.
I'd try to rename ~/.config/.libreoffice and have LO start anew. You've tried it as root (never a good idea BTW and you may even provoke permission probs) but a new user is always preferable.

Renaming that the libreoffice config folder worked for me. I created an account just to thank you, so thank you very much!

Arch Linux

#1 2011-12-28 19:01:19

Libreoffice crashes with no error

#2 2011-12-28 19:10:42

Re: Libreoffice crashes with no error

#3 2011-12-28 19:27:15

Re: Libreoffice crashes with no error

#4 2011-12-28 19:35:50

Re: Libreoffice crashes with no error

#5 2011-12-28 19:38:33

Re: Libreoffice crashes with no error

#6 2011-12-28 20:00:12

Re: Libreoffice crashes with no error

#7 2011-12-28 20:01:47

Re: Libreoffice crashes with no error

#8 2011-12-28 20:08:46

Re: Libreoffice crashes with no error

#9 2011-12-28 20:12:26

Re: Libreoffice crashes with no error

#10 2011-12-28 20:17:29

Re: Libreoffice crashes with no error

#11 2011-12-28 20:20:48

Re: Libreoffice crashes with no error

#12 2011-12-28 20:46:54

Re: Libreoffice crashes with no error

#13 2011-12-28 20:48:03

Re: Libreoffice crashes with no error

#14 2011-12-28 21:55:34

Re: Libreoffice crashes with no error

#15 2011-12-28 22:28:08

Re: Libreoffice crashes with no error

#16 2011-12-29 08:02:01

Re: Libreoffice crashes with no error

#17 2011-12-29 11:47:08

Re: Libreoffice crashes with no error

#18 2011-12-29 12:05:00

Re: Libreoffice crashes with no error

#19 2011-12-29 17:24:54

Re: Libreoffice crashes with no error

#20 2011-12-29 17:33:49

Re: Libreoffice crashes with no error

#21 2011-12-29 17:56:09

Re: Libreoffice crashes with no error

#22 2011-12-29 18:35:28

Re: Libreoffice crashes with no error

#23 2012-04-09 08:44:05

Re: Libreoffice crashes with no error

Board footer