You are not logged in.
- Topics: Active | Unanswered
Pages: 1
#1 2012-02-08 01:18:26
- doug piston
- Member
- From: Seattle
- Registered: 2011-09-11
- Posts: 387
- Website
[Solved]ata error at boot time
I start x manually on boot and the last few days I've been getting this or a variation of this error
I am able to hit enter, get to my login and startx and system seems to run as should. I attempted this fix but the error came back https://bbs.archlinux.org/viewtopic.php … 1#p1053761
Any insight would be helpful as I am a bit befuddled at the moment.
Cheers.
Last edited by doug piston (2012-02-10 16:47:19)
Offline
#2 2012-02-09 16:10:10
- doug piston
- Member
- From: Seattle
- Registered: 2011-09-11
- Posts: 387
- Website
Re: [Solved]ata error at boot time
Still getting this error and am very unclear of what the issue is
1. 4.218295] Linux video capture interface: v2.00
2.[ 4.224793] uvcvideo: Found UVC 1.00 device HP Webcam (04f2:b016)
3.[ 4.230416] input: HP Webcam as /devices/pci0000:00/0000:00:1d.7/usb2/2-5/2-5:1.0/input/input8
4.[ 4.230620] usbcore: registered new interface driver uvcvideo
5.[ 4.230623] USB Video Class driver (1.1.1)
6.[ 4.247836] r852 0000:08:09.3: PCI INT B -> GSI 18 (level, low) -> IRQ 18
7.[ 4.247930] r852: driver loaded successfully
8.[ 4.280882] [drm] Initialized drm 1.1.0 20060810
9.[ 4.288786] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
10.[ 4.289673] iTCO_wdt: Found a ICH8M TCO device (Version=2, TCOBASE=0x1060)
11.[ 4.289766] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
12.[ 4.309543] hda_codec: CX20549 (Venice): BIOS auto-probing.
13.[ 4.310335] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input9
14.[ 4.316753] ieee80211 phy0: Selected rate control algorithm 'iwl-3945-rs'
15.[ 4.324337] firewire_ohci 0000:08:09.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
16.[ 4.342666] agpgart-intel 0000:00:00.0: Intel 965GM Chipset
17.[ 4.344043] agpgart-intel 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable
18.[ 4.344819] agpgart-intel 0000:00:00.0: detected 8192K stolen memory
19.[ 4.351806] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
20.[ 4.351842] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 19 (level, low) -> IRQ 19
21.[ 4.351849] ACPI: resource 0000:00:1f.3 [io 0x1c20-0x1c3f] conflicts with ACPI region SMBI [io 0x1c20-0x1c2f]
22.[ 4.351852] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
23.[ 4.364415] pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
24.[ 4.364423] pci 0000:00:02.0: setting latency timer to 64
25.[ 4.383463] firewire_ohci: Added fw-ohci device 0000:08:09.0, OHCI v1.10, 4 IR + 4 IT contexts, quirks 0x1
26.[ 4.383739] r592 0000:08:09.2: PCI INT B -> GSI 18 (level, low) -> IRQ 18
27.[ 4.385558] r592: driver successfully loaded
28.[ 4.456426] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining
29.[ 4.456431] [drm] MTRR allocation failed. Graphics performance may suffer.
30.[ 4.457000] pci 0000:00:02.0: irq 48 for MSI/MSI-X
31.[ 4.457007] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
32.[ 4.457010] [drm] No driver support for vblank timestamp query.
33.[ 4.813677] acpi device:09: registered as cooling_device2
34.[ 4.814022] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input10
35.[ 4.814177] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
36.[ 4.814396] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
37.[ 4.883708] firewire_core: created device fw0: GUID 08e40a00c9be5012, S400
38.[ 5.073764] EXT4-fs (sda3): re-mounted. Opts: discard
39.[ 5.130730] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: discard
40.[ 5.382719] Adding 530140k swap on /dev/sda2. Priority:-1 extents:1 across:530140k SS
41.[ 6.720877] NET: Registered protocol family 10
42.[ 6.762242] iwl3945 0000:07:00.0: loaded firmware version 15.32.2.9
43.[ 6.836274] ADDRCONF(NETDEV_UP): wlan0: link is not ready
44.[ 7.196209] ata3: exception Emask 0x10 SAct 0x0 SErr 0x90000 action 0xe frozen
45.[ 7.196532] ata3: irq_stat 0x00400000, PHY RDY changed
46.[ 7.196691] ata3: SError: { PHYRdyChg 10B8B }
47.[ 7.196838] ata3: hard resetting link
48.[ 7.916920] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
49.[ 7.940352] ata3.00: unexpected _GTF length (8)
50.[ 7.947997] ata3.00: unexpected _GTF length (8)
51.[ 7.948648] ata3.00: configured for UDMA/133
52.[ 7.948657] ata3: EH complete
53.[ 12.035622] sky2 0000:05:00.0: eth0: enabling interface
54.[ 12.036279] ADDRCONF(NETDEV_UP): eth0: link is not ready
55.[ 13.865932] ata3: exception Emask 0x10 SAct 0x0 SErr 0x90000 action 0xe frozen
56.[ 13.866222] ata3: irq_stat 0x00400000, PHY RDY changed
57.[ 13.866369] ata3: SError: { PHYRdyChg 10B8B }
58.[ 13.866496] ata3: hard resetting link
59.[ 14.583607] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
60.[ 14.595044] ata3.00: unexpected _GTF length (8)
61.[ 14.604997] ata3.00: unexpected _GTF length (8)
62.[ 14.605657] ata3.00: configured for UDMA/133
63.[ 14.605667] ata3: EH complete
64.[ 17.230522] ADDRCONF(NETDEV_UP): wlan0: link is not ready
65.[ 17.272293] sky2 0000:05:00.0: eth0: disabling interface
66.[ 17.280936] sky2 0000:05:00.0: eth0: enabling interface
67.[ 17.281590] ADDRCONF(NETDEV_UP): eth0: link is not ready
68.[ 17.380498] ADDRCONF(NETDEV_UP): wlan0: link is not ready
69.[ 18.671695] ata3: limiting SATA link speed to 1.5 Gbps
70.[ 18.671705] ata3: exception Emask 0x10 SAct 0x0 SErr 0x90000 action 0xe frozen
71.[ 18.671980] ata3: irq_stat 0x00400000, PHY RDY changed
72.[ 18.672126] ata3: SError: { PHYRdyChg 10B8B }
73.[ 18.672254] ata3: hard resetting link
74.[ 19.450274] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
75.[ 19.453041] ata3.00: unexpected _GTF length (8)
76.[ 19.462994] ata3.00: unexpected _GTF length (8)
77.[ 19.463645] ata3.00: configured for UDMA/133
78.[ 19.463654] ata3: EH complete
79.[ 20.030309] ata3: exception Emask 0x10 SAct 0x0 SErr 0x90000 action 0xe frozen
80.[ 20.030592] ata3: irq_stat 0x00400000, PHY RDY changed
81.[ 20.030739] ata3: SError: { PHYRdyChg 10B8B }
82.[ 20.030867] ata3: hard resetting link
83.[ 20.750240] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
84.[ 20.753259] ata3.00: unexpected _GTF length (8)
85.[ 20.763196] ata3.00: unexpected _GTF length (8)
86.[ 20.763879] ata3.00: configured for UDMA/133
87.[ 20.763890] ata3: EH complete
88.[ 21.714933] ata3: exception Emask 0x10 SAct 0x0 SErr 0x90000 action 0xe frozen
89.[ 21.715225] ata3: irq_stat 0x00400000, PHY RDY changed
90.[ 21.715371] ata3: SError: { PHYRdyChg 10B8B }
91.[ 21.715499] ata3: hard resetting link
92.[ 22.175390] wlan0: authenticate with c0:c1:c0:53:72:ee (try 1)
93.[ 22.177313] wlan0: authenticated
94.[ 22.177340] wlan0: associate with c0:c1:c0:53:72:ee (try 1)
95.[ 22.180054] wlan0: RX AssocResp from c0:c1:c0:53:72:ee (capab=0x411 status=0 aid=2)
96.[ 22.180062] wlan0: associated
97.[ 22.182724] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
98.[ 22.433604] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
99.[ 22.435991] ata3.00: unexpected _GTF length (8)
100.[ 22.445925] ata3.00: unexpected _GTF length (8)
101.[ 22.446581] ata3.00: configured for UDMA/133
102.[ 22.446590] ata3: EH complete
103.[ 23.172840] ata3: exception Emask 0x10 SAct 0x0 SErr 0x90000 action 0xe frozen
104.[ 23.173123] ata3: irq_stat 0x00400000, PHY RDY changed
105.[ 23.173269] ata3: SError: { PHYRdyChg 10B8B }
106.[ 23.173410] ata3: hard resetting link
107.[ 23.893583] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
108.[ 23.903718] ata3.00: unexpected _GTF length (8)
109.[ 23.913626] ata3.00: unexpected _GTF length (8)
110.[ 23.914319] ata3.00: configured for UDMA/133
111.[ 23.914327] ata3: EH complete
112.[ 24.232328] ata3.00: limiting speed to UDMA/100:PIO4
113.[ 24.232338] ata3: exception Emask 0x10 SAct 0x0 SErr 0x90000 action 0xe frozen
114.[ 24.232616] ata3: irq_stat 0x00400000, PHY RDY changed
115.[ 24.232762] ata3: SError: { PHYRdyChg 10B8B }
116.[ 24.232889] ata3: hard resetting link
117.[ 25.370235] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
118.[ 25.378426] ata3.00: unexpected _GTF length (8)
119.[ 25.388394] ata3.00: unexpected _GTF length (8)
120.[ 25.389056] ata3.00: configured for UDMA/100
121.[ 25.389064] ata3: EH complete
122.[ 27.334282] ata3: exception Emask 0x10 SAct 0x0 SErr 0x90000 action 0xe frozen
123.[ 27.334573] ata3: irq_stat 0x00400000, PHY RDY changed
124.[ 27.334720] ata3: SError: { PHYRdyChg 10B8B }
125.[ 27.334848] ata3: hard resetting link
126.[ 28.053570] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
127.[ 28.064250] ata3.00: unexpected _GTF length (8)
128.[ 28.074220] ata3.00: unexpected _GTF length (8)
129.[ 28.074855] ata3.00: configured for UDMA/100
130.[ 28.074863] ata3: EH complete
131.[ 29.419345] ata3: exception Emask 0x10 SAct 0x0 SErr 0x90000 action 0xe frozen
132.[ 29.419625] ata3: irq_stat 0x00400000, PHY RDY changed
133.[ 29.419772] ata3: SError: { PHYRdyChg 10B8B }
134.[ 29.419900] ata3: hard resetting link
135.[ 30.136934] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
136.[ 30.140391] ata3.00: unexpected _GTF length (8)
137.[ 30.150350] ata3.00: unexpected _GTF length (8)
138.[ 30.151062] ata3.00: configured for UDMA/100
139.[ 30.151070] ata3: EH complete
140.[ 32.884564] ata3: exception Emask 0x50 SAct 0x0 SErr 0x40d0802 action 0xe frozen
141.[ 32.884853] ata3: irq_stat 0x00400040, connection status changed
142.[ 32.885024] ata3: SError: { RecovComm HostInt PHYRdyChg CommWake 10B8B DevExch }
143.[ 32.885236] ata3: hard resetting link
144.[ 33.083542] wlan0: no IPv6 routers present
145.[ 33.903585] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
146.[ 33.904417] ata3.00: unexpected _GTF length (8)
147.[ 33.914387] ata3.00: unexpected _GTF length (8)
148.[ 33.915049] ata3.00: configured for UDMA/100
149.[ 33.915057] ata3: EH complete
150.[ 34.766514] ata3.00: limiting speed to UDMA/33:PIO4
151.[ 34.766523] ata3: exception Emask 0x10 SAct 0x0 SErr 0x90000 action 0xe frozen
152.[ 34.766822] ata3: irq_stat 0x00400000, PHY RDY changed
153.[ 34.766991] ata3: SError: { PHYRdyChg 10B8B }
154.[ 34.767132] ata3: hard resetting link
155.[ 35.486936] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
156.[ 35.494642] ata3.00: unexpected _GTF length (8)
157.[ 35.504596] ata3.00: unexpected _GTF length (8)
158.[ 35.505245] ata3.00: configured for UDMA/33
159.[ 35.505254] ata3: EH complete
160.[ 35.509887] ata3: exception Emask 0x10 SAct 0x0 SErr 0x90000 action 0xe frozen
161.[ 35.510246] ata3: irq_stat 0x00400000, PHY RDY changed
162.[ 35.510396] ata3: SError: { PHYRdyChg 10B8B }
163.[ 35.510527] ata3: hard resetting link
164.[ 36.500273] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
165.[ 36.510233] ata3.00: unexpected _GTF length (8)
166.[ 36.520191] ata3.00: unexpected _GTF length (8)
167.[ 36.520874] ata3.00: configured for UDMA/33
168.[ 36.520882] ata3: EH complete
169.[ 40.303710] ata3: exception Emask 0x10 SAct 0x0 SErr 0x90000 action 0xe frozen
170.[ 40.303718] ata3: irq_stat 0x00400000, PHY RDY changed
171.[ 40.303725] ata3: SError: { PHYRdyChg 10B8B }
172.[ 40.303735] ata3: hard resetting link
173.[ 41.353575] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
174.[ 41.356391] ata3.00: unexpected _GTF length (8)
175.[ 41.366369] ata3.00: unexpected _GTF length (8)
176.[ 41.367021] ata3.00: configured for UDMA/33
177.[ 41.367030] ata3: EH complete
178.[ 45.551041] ata3: exception Emask 0x10 SAct 0x0 SErr 0x90000 action 0xe frozen
179.[ 45.551050] ata3: irq_stat 0x00400000, PHY RDY changed
180.[ 45.551056] ata3: SError: { PHYRdyChg 10B8B }
181.[ 45.551067] ata3: hard resetting link
182.[ 46.270237] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
183.[ 46.271726] ata3.00: unexpected _GTF length (8)
184.[ 46.281682] ata3.00: unexpected _GTF length (8)
185.[ 46.282342] ata3.00: configured for UDMA/33
186.[ 46.282352] ata3: EH complete
187.[ 47.942186] ata3: exception Emask 0x10 SAct 0x0 SErr 0x90000 action 0xe frozen
188.[ 47.942194] ata3: irq_stat 0x00400000, PHY RDY changed
189.[ 47.942200] ata3: SError: { PHYRdyChg 10B8B }
190.[ 47.942211] ata3: hard resetting link
191.[ 48.660236] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
192.[ 48.663762] ata3.00: unexpected _GTF length (8)
193.[ 48.673792] ata3.00: unexpected _GTF length (8)
194.[ 48.674458] ata3.00: configured for UDMA/33
195.[ 48.674467] ata3: EH complete
196.[ 50.469455] ata3: exception Emask 0x10 SAct 0x0 SErr 0x90000 action 0xe frozen
197.[ 50.469463] ata3: irq_stat 0x00400000, PHY RDY changed
198.[ 50.469469] ata3: SError: { PHYRdyChg 10B8B }
199.[ 50.469480] ata3: hard resetting link
200.[ 51.186936] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
201.[ 51.190331] ata3.00: unexpected _GTF length (8)
202.[ 51.203720] ata3.00: unexpected _GTF length (8)
203.[ 51.204116] ata3.00: configured for UDMA/33
204.[ 51.204123] ata3: EH complete
205.[ 52.683922] ata3: exception Emask 0x10 SAct 0x0 SErr 0x90000 action 0xe frozen
206.[ 52.683930] ata3: irq_stat 0x00400000, PHY RDY changed
207.[ 52.683937] ata3: SError: { PHYRdyChg 10B8B }
208.[ 52.683947] ata3: hard resetting link
209.[ 53.403589] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
210.[ 53.414757] ata3.00: unexpected _GTF length (8)
211.[ 53.424716] ata3.00: unexpected _GTF length (8)
212.[ 53.425378] ata3.00: configured for UDMA/33
213.[ 53.425388] ata3: EH complete
214.[ 54.163578] ata3: exception Emask 0x50 SAct 0x0 SErr 0x40d0802 action 0xe frozen
215.[ 54.163587] ata3: irq_stat 0x00400040, connection status changed
216.[ 54.163594] ata3: SError: { RecovComm HostInt PHYRdyChg CommWake 10B8B DevExch }
217.[ 54.163605] ata3: hard resetting link
218.[ 55.123572] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
219.[ 55.133902] ata3.00: unexpected _GTF length (8)
220.[ 55.143852] ata3.00: unexpected _GTF length (8)
221.[ 55.144501] ata3.00: configured for UDMA/33
222.[ 55.144510] ata3: EH completeThe hard drive is a week old SSD and from my observation I get the error on a cold boot most often. About 80% of the time a reboot will not reproduce the error.
EDIT: Seems I am a knucklehead and maybe missed a pin on install. All fixed
Last edited by doug piston (2012-02-10 16:46:44)
Offline
#3 2012-09-11 12:07:35
- Murz
- Member
- Registered: 2012-09-11
- Posts: 1
Re: [Solved]ata error at boot time
Got the same error on 2 week old SSD - not so often, but 3-10 times per day in syslog (system works 24 hours per day):
Sep 11 03:39:07 linux kernel: [40193.778241] ata1: exception Emask 0x10 SAct 0x0 SErr 0x90000 action 0xe frozen
Sep 11 03:39:07 linux kernel: [40193.778262] ata1: irq_stat 0x00400000, PHY RDY changed
Sep 11 03:39:07 linux kernel: [40193.778271] ata1: SError: { PHYRdyChg 10B8B }
Sep 11 03:39:07 linux kernel: [40193.778294] ata1: hard resetting link
Sep 11 03:39:08 linux kernel: [40194.503785] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Sep 11 03:39:08 linux kernel: [40194.525808] ata1.00: configured for UDMA/133
Sep 11 03:39:08 linux kernel: [40194.539727] ata1: EH completeSSD is OCZ AGILITY3.
kernel is 3.2.0-29-generic
doug piston, did you solve your problem? Or maybe found the source of the problem?
Last edited by Murz (2012-09-11 12:08:25)
Offline
Pages: 1