You are not logged in.
- Topics: Active | Unanswered
Pages: 1
#1 2012-03-01 18:43:06
- rabbidrabbit
- Member
- Registered: 2012-01-30
- Posts: 11
[SOLVED] Synaptics module not loading
Hi,
Recently my synaptics touchpad has stopped working. I ran lsmod and couldn't find any modules for the touchpad.
How would I go about loading the module.
Last edited by rabbidrabbit (2012-03-03 18:29:40)
Offline
#2 2012-03-02 02:40:50
- hadrons123
- Member
- From: chennai
- Registered: 2011-10-07
- Posts: 1,249
Re: [SOLVED] Synaptics module not loading
This is not enough info. Post your xorg log.
LENOVO Y 580 IVYBRIDGE 660M NVIDIA
Unix is user-friendly. It just isn't promiscuous about which users it's friendly with. - Steven King
Offline
#3 2012-03-02 17:05:37
- rabbidrabbit
- Member
- Registered: 2012-01-30
- Posts: 11
Re: [SOLVED] Synaptics module not loading
hi,
Here is my Xorg log
[ 42.008]
X.Org X Server 1.11.4
Release Date: 2012-01-27
[ 42.008] X Protocol Version 11, Revision 0
[ 42.008] Build Operating System: Linux 3.2.2-1-ARCH i686
[ 42.008] Current Operating System: Linux Darkstar 3.2.8-1-ARCH #1 SMP PREEMPT Mon Feb 27 22:13:59 UTC 2012 i686
[ 42.008] Kernel command line: root=/dev/sda6 resume=/dev/sda5 ro
[ 42.008] Build Date: 29 January 2012 03:41:53PM
[ 42.008]
[ 42.008] Current version of pixman: 0.24.4
[ 42.008] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 42.008] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 42.008] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Mar 2 16:53:58 2012
[ 42.056] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 42.084] (==) No Layout section. Using the first Screen section.
[ 42.084] (==) No screen section available. Using defaults.
[ 42.084] (**) |-->Screen "Default Screen Section" (0)
[ 42.084] (**) | |-->Monitor "<default monitor>"
[ 42.096] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 42.096] (==) Automatically adding devices
[ 42.096] (==) Automatically enabling devices
[ 42.277] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 42.277] Entry deleted from font path.
[ 42.400] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 42.400] Entry deleted from font path.
[ 42.400] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 42.402] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 42.402] Entry deleted from font path.
[ 42.402] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 42.402] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/
[ 42.402] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 42.402] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 42.418] (II) Loader magic: 0x8228580
[ 42.418] (II) Module ABI versions:
[ 42.418] X.Org ANSI C Emulation: 0.4
[ 42.418] X.Org Video Driver: 11.0
[ 42.418] X.Org XInput driver : 13.0
[ 42.418] X.Org Server Extension : 6.0
[ 42.419] (--) PCI:*(0:0:2:0) 8086:2a42:103c:1605 rev 7, Mem @ 0xd0000000/4194304, 0xc0000000/268435456, I/O @ 0x00004110/8
[ 42.419] (--) PCI: (0:0:2:1) 8086:2a43:103c:1605 rev 7, Mem @ 0xd2400000/1048576
[ 42.419] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 42.419] (II) LoadModule: "extmod"
[ 42.443] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 42.461] (II) Module extmod: vendor="X.Org Foundation"
[ 42.461] compiled for 1.11.4, module version = 1.0.0
[ 42.461] Module class: X.Org Server Extension
[ 42.461] ABI class: X.Org Server Extension, version 6.0
[ 42.461] (II) Loading extension MIT-SCREEN-SAVER
[ 42.461] (II) Loading extension XFree86-VidModeExtension
[ 42.461] (II) Loading extension XFree86-DGA
[ 42.462] (II) Loading extension DPMS
[ 42.462] (II) Loading extension XVideo
[ 42.462] (II) Loading extension XVideo-MotionCompensation
[ 42.462] (II) Loading extension X-Resource
[ 42.462] (II) LoadModule: "dbe"
[ 42.462] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 42.470] (II) Module dbe: vendor="X.Org Foundation"
[ 42.470] compiled for 1.11.4, module version = 1.0.0
[ 42.470] Module class: X.Org Server Extension
[ 42.470] ABI class: X.Org Server Extension, version 6.0
[ 42.470] (II) Loading extension DOUBLE-BUFFER
[ 42.470] (II) LoadModule: "glx"
[ 42.470] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 42.495] (II) Module glx: vendor="X.Org Foundation"
[ 42.495] compiled for 1.11.4, module version = 1.0.0
[ 42.495] ABI class: X.Org Server Extension, version 6.0
[ 42.495] (==) AIGLX enabled
[ 42.495] (II) Loading extension GLX
[ 42.495] (II) LoadModule: "record"
[ 42.495] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 42.496] (II) Module record: vendor="X.Org Foundation"
[ 42.496] compiled for 1.11.4, module version = 1.13.0
[ 42.496] Module class: X.Org Server Extension
[ 42.496] ABI class: X.Org Server Extension, version 6.0
[ 42.496] (II) Loading extension RECORD
[ 42.496] (II) LoadModule: "dri"
[ 42.496] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 42.514] (II) Module dri: vendor="X.Org Foundation"
[ 42.514] compiled for 1.11.4, module version = 1.0.0
[ 42.514] ABI class: X.Org Server Extension, version 6.0
[ 42.514] (II) Loading extension XFree86-DRI
[ 42.514] (II) LoadModule: "dri2"
[ 42.637] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 42.638] (II) Module dri2: vendor="X.Org Foundation"
[ 42.638] compiled for 1.11.4, module version = 1.2.0
[ 42.638] ABI class: X.Org Server Extension, version 6.0
[ 42.638] (II) Loading extension DRI2
[ 42.638] (==) Matched intel as autoconfigured driver 0
[ 42.638] (==) Matched vesa as autoconfigured driver 1
[ 42.638] (==) Matched fbdev as autoconfigured driver 2
[ 42.638] (==) Assigned the driver to the xf86ConfigLayout
[ 42.638] (II) LoadModule: "intel"
[ 42.638] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 42.753] (II) Module intel: vendor="X.Org Foundation"
[ 42.753] compiled for 1.11.2, module version = 2.17.0
[ 42.753] Module class: X.Org Video Driver
[ 42.753] ABI class: X.Org Video Driver, version 11.0
[ 42.753] (II) LoadModule: "vesa"
[ 42.766] (WW) Warning, couldn't open module vesa
[ 42.766] (II) UnloadModule: "vesa"
[ 42.766] (II) Unloading vesa
[ 42.766] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 42.766] (II) LoadModule: "fbdev"
[ 42.767] (WW) Warning, couldn't open module fbdev
[ 42.767] (II) UnloadModule: "fbdev"
[ 42.767] (II) Unloading fbdev
[ 42.767] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 42.767] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server
[ 42.767] (--) using VT number 7
[ 42.774] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 42.774] drmOpenDevice: node name is /dev/dri/card0
[ 42.774] drmOpenDevice: open result is 8, (OK)
[ 42.774] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[ 42.774] drmOpenDevice: node name is /dev/dri/card0
[ 42.774] drmOpenDevice: open result is 8, (OK)
[ 42.774] drmOpenByBusid: drmOpenMinor returns 8
[ 42.774] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[ 42.774] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 42.774] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 42.774] (==) intel(0): RGB weight 888
[ 42.774] (==) intel(0): Default visual is TrueColor
[ 42.774] (II) intel(0): Integrated Graphics Chipset: Intel(R) GM45
[ 42.774] (--) intel(0): Chipset: "GM45"
[ 42.774] (**) intel(0): Relaxed fencing enabled
[ 42.774] (**) intel(0): Wait on SwapBuffers? enabled
[ 42.774] (**) intel(0): Triple buffering? enabled
[ 42.774] (**) intel(0): Framebuffer tiled
[ 42.774] (**) intel(0): Pixmaps tiled
[ 42.774] (**) intel(0): 3D buffers tiled
[ 42.774] (**) intel(0): SwapBuffers wait enabled
[ 42.774] (==) intel(0): video overlay key set to 0x101fe
[ 42.774] (II) intel(0): Output LVDS1 has no monitor section
[ 42.775] (II) intel(0): found backlight control interface /sys/class/backlight/acpi_video0
[ 42.793] (II) intel(0): Output VGA1 has no monitor section
[ 42.813] (II) intel(0): Output HDMI1 has no monitor section
[ 42.853] (II) intel(0): Output DP1 has no monitor section
[ 42.893] (II) intel(0): Output DP2 has no monitor section
[ 42.893] (II) intel(0): EDID for output LVDS1
[ 42.893] (II) intel(0): Manufacturer: LGD Model: 2ac Serial#: 0
[ 42.893] (II) intel(0): Year: 2010 Week: 0
[ 42.893] (II) intel(0): EDID Version: 1.3
[ 42.893] (II) intel(0): Digital Display Input
[ 42.893] (II) intel(0): Max Image Size [cm]: horiz.: 34 vert.: 19
[ 42.893] (II) intel(0): Gamma: 2.20
[ 42.893] (II) intel(0): No DPMS capabilities specified
[ 42.893] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 42.893] (II) intel(0): First detailed timing is preferred mode
[ 42.893] (II) intel(0): redX: 0.616 redY: 0.371 greenX: 0.355 greenY: 0.606
[ 42.893] (II) intel(0): blueX: 0.152 blueY: 0.100 whiteX: 0.313 whiteY: 0.329
[ 42.893] (II) intel(0): Manufacturer's mask: 0
[ 42.893] (II) intel(0): Supported detailed timing:
[ 42.893] (II) intel(0): clock: 69.3 MHz Image Size: 344 x 194 mm
[ 42.893] (II) intel(0): h_active: 1366 h_sync: 1398 h_sync_end 1430 h_blank_end 1486 h_border: 0
[ 42.893] (II) intel(0): v_active: 768 v_sync: 770 v_sync_end 774 v_blanking: 782 v_border: 0
[ 42.893] (II) intel(0): LG Display
[ 42.893] (II) intel(0): LP156WH2-TLQB
[ 42.893] (II) intel(0): EDID (in hex):
[ 42.893] (II) intel(0): 00ffffffffffff0030e4ac0200000000
[ 42.893] (II) intel(0): 00140103802213780ac1259d5f5b9b27
[ 42.893] (II) intel(0): 19505400000001010101010101010101
[ 42.893] (II) intel(0): 010101010101121b567850000e302020
[ 42.893] (II) intel(0): 240058c2100000190000000000000000
[ 42.893] (II) intel(0): 00000000000000000000000000fe004c
[ 42.893] (II) intel(0): 4720446973706c61790a2020000000fe
[ 42.893] (II) intel(0): 004c503135365748322d544c514200c1
[ 42.893] (II) intel(0): EDID vendor "LGD", prod id 684
[ 42.893] (II) intel(0): Printing DDC gathered Modelines:
[ 42.893] (II) intel(0): Modeline "1366x768"x0.0 69.30 1366 1398 1430 1486 768 770 774 782 -hsync -vsync (46.6 kHz)
[ 43.005] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[ 43.005] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 43.005] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 43.005] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[ 43.005] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[ 43.005] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[ 43.005] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[ 43.005] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[ 43.005] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[ 43.005] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[ 43.005] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[ 43.005] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[ 43.005] (II) intel(0): Printing probed modes for output LVDS1
[ 43.005] (II) intel(0): Modeline "1366x768"x59.6 69.30 1366 1398 1430 1486 768 770 774 782 -hsync -vsync (46.6 kHz)
[ 43.005] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 43.005] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 43.005] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 43.005] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 43.023] (II) intel(0): EDID for output VGA1
[ 43.042] (II) intel(0): EDID for output HDMI1
[ 43.083] (II) intel(0): EDID for output DP1
[ 43.123] (II) intel(0): EDID for output DP2
[ 43.123] (II) intel(0): Output LVDS1 connected
[ 43.123] (II) intel(0): Output VGA1 disconnected
[ 43.123] (II) intel(0): Output HDMI1 disconnected
[ 43.123] (II) intel(0): Output DP1 disconnected
[ 43.123] (II) intel(0): Output DP2 disconnected
[ 43.123] (II) intel(0): Using exact sizes for initial modes
[ 43.123] (II) intel(0): Output LVDS1 using initial mode 1366x768
[ 43.123] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 43.123] (II) intel(0): Kernel page flipping support detected, enabling
[ 43.123] (**) intel(0): Display dimensions: (340, 190) mm
[ 43.123] (**) intel(0): DPI set to (102, 102)
[ 43.123] (II) Loading sub module "fb"
[ 43.123] (II) LoadModule: "fb"
[ 43.123] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 43.472] (II) Module fb: vendor="X.Org Foundation"
[ 43.472] compiled for 1.11.4, module version = 1.0.0
[ 43.472] ABI class: X.Org ANSI C Emulation, version 0.4
[ 43.472] (II) Loading sub module "dri2"
[ 43.472] (II) LoadModule: "dri2"
[ 43.472] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 43.472] (II) Module dri2: vendor="X.Org Foundation"
[ 43.472] compiled for 1.11.4, module version = 1.2.0
[ 43.472] ABI class: X.Org Server Extension, version 6.0
[ 43.472] (==) Depth 24 pixmap format is 32 bpp
[ 43.472] (II) intel(0): [DRI2] Setup complete
[ 43.472] (II) intel(0): [DRI2] DRI driver: i965
[ 43.472] (II) intel(0): Allocated new frame buffer 1408x768 stride 5632, tiled
[ 43.487] (II) UXA(0): Driver registered support for the following operations:
[ 43.487] (II) solid
[ 43.487] (II) copy
[ 43.487] (II) composite (RENDER acceleration)
[ 43.487] (II) put_image
[ 43.487] (II) get_image
[ 43.487] (==) intel(0): Backing store disabled
[ 43.487] (==) intel(0): Silken mouse enabled
[ 43.487] (II) intel(0): Initializing HW Cursor
[ 43.513] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 43.515] (==) intel(0): DPMS enabled
[ 43.515] (==) intel(0): Intel XvMC decoder enabled
[ 43.515] (II) intel(0): Set up textured video
[ 43.515] (II) intel(0): [XvMC] xvmc_vld driver initialized.
[ 43.515] (II) intel(0): direct rendering: DRI2 Enabled
[ 43.515] (==) intel(0): hotplug detection: "enabled"
[ 43.515] (--) RandR disabled
[ 43.515] (II) Initializing built-in extension Generic Event Extension
[ 43.515] (II) Initializing built-in extension SHAPE
[ 43.515] (II) Initializing built-in extension MIT-SHM
[ 43.515] (II) Initializing built-in extension XInputExtension
[ 43.515] (II) Initializing built-in extension XTEST
[ 43.515] (II) Initializing built-in extension BIG-REQUESTS
[ 43.515] (II) Initializing built-in extension SYNC
[ 43.515] (II) Initializing built-in extension XKEYBOARD
[ 43.515] (II) Initializing built-in extension XC-MISC
[ 43.515] (II) Initializing built-in extension SECURITY
[ 43.515] (II) Initializing built-in extension XINERAMA
[ 43.515] (II) Initializing built-in extension XFIXES
[ 43.515] (II) Initializing built-in extension RENDER
[ 43.515] (II) Initializing built-in extension RANDR
[ 43.515] (II) Initializing built-in extension COMPOSITE
[ 43.515] (II) Initializing built-in extension DAMAGE
[ 43.940] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 43.940] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 43.940] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 43.940] (II) AIGLX: enabled GLX_SGI_make_current_read
[ 43.940] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 43.940] (II) AIGLX: Loaded and initialized i965
[ 43.940] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 43.941] (II) intel(0): Setting screen physical size to 361 x 203
[ 44.499] (II) config/udev: Adding input device Power Button (/dev/input/event7)
[ 44.499] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 44.499] (II) LoadModule: "evdev"
[ 44.499] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 44.507] (II) Module evdev: vendor="X.Org Foundation"
[ 44.507] compiled for 1.10.99.902, module version = 2.6.0
[ 44.507] Module class: X.Org XInput Driver
[ 44.507] ABI class: X.Org XInput driver, version 13.0
[ 44.507] (II) Using input driver 'evdev' for 'Power Button'
[ 44.507] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 44.507] (**) Power Button: always reports core events
[ 44.507] (**) Power Button: Device: "/dev/input/event7"
[ 44.507] (--) Power Button: Found keys
[ 44.507] (II) Power Button: Configuring as keyboard
[ 44.507] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input7/event7"
[ 44.507] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 44.507] (**) Option "xkb_rules" "evdev"
[ 44.507] (**) Option "xkb_model" "evdev"
[ 44.507] (**) Option "xkb_layout" "us"
[ 44.538] (II) config/udev: Adding input device Video Bus (/dev/input/event11)
[ 44.538] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 44.538] (II) Using input driver 'evdev' for 'Video Bus'
[ 44.538] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 44.538] (**) Video Bus: always reports core events
[ 44.538] (**) Video Bus: Device: "/dev/input/event11"
[ 44.538] (--) Video Bus: Found keys
[ 44.538] (II) Video Bus: Configuring as keyboard
[ 44.538] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input11/event11"
[ 44.538] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 44.538] (**) Option "xkb_rules" "evdev"
[ 44.538] (**) Option "xkb_model" "evdev"
[ 44.538] (**) Option "xkb_layout" "us"
[ 44.538] (II) config/udev: Adding input device Power Button (/dev/input/event5)
[ 44.538] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 44.538] (II) Using input driver 'evdev' for 'Power Button'
[ 44.538] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 44.538] (**) Power Button: always reports core events
[ 44.539] (**) Power Button: Device: "/dev/input/event5"
[ 44.539] (--) Power Button: Found keys
[ 44.539] (II) Power Button: Configuring as keyboard
[ 44.539] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input5/event5"
[ 44.539] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 44.539] (**) Option "xkb_rules" "evdev"
[ 44.539] (**) Option "xkb_model" "evdev"
[ 44.539] (**) Option "xkb_layout" "us"
[ 44.539] (II) config/udev: Adding input device Lid Switch (/dev/input/event6)
[ 44.539] (II) No input driver specified, ignoring this device.
[ 44.539] (II) This device may have been added with another device file.
[ 44.540] (II) config/udev: Adding input device Microsoft Microsoft® Nano Transceiver v2.0 (/dev/input/event1)
[ 44.540] (**) Microsoft Microsoft® Nano Transceiver v2.0: Applying InputClass "evdev keyboard catchall"
[ 44.540] (II) Using input driver 'evdev' for 'Microsoft Microsoft® Nano Transceiver v2.0'
[ 44.540] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 44.540] (**) Microsoft Microsoft® Nano Transceiver v2.0: always reports core events
[ 44.540] (**) Microsoft Microsoft® Nano Transceiver v2.0: Device: "/dev/input/event1"
[ 44.540] (--) Microsoft Microsoft® Nano Transceiver v2.0: Found keys
[ 44.540] (II) Microsoft Microsoft® Nano Transceiver v2.0: Configuring as keyboard
[ 44.540] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.1/usb2/2-1/2-1:1.0/input/input1/event1"
[ 44.540] (II) XINPUT: Adding extended input device "Microsoft Microsoft® Nano Transceiver v2.0" (type: KEYBOARD, id 9)
[ 44.540] (**) Option "xkb_rules" "evdev"
[ 44.540] (**) Option "xkb_model" "evdev"
[ 44.540] (**) Option "xkb_layout" "us"
[ 44.540] (II) config/udev: Adding input device Microsoft Microsoft® Nano Transceiver v2.0 (/dev/input/event2)
[ 44.540] (**) Microsoft Microsoft® Nano Transceiver v2.0: Applying InputClass "evdev pointer catchall"
[ 44.541] (**) Microsoft Microsoft® Nano Transceiver v2.0: Applying InputClass "evdev keyboard catchall"
[ 44.541] (II) Using input driver 'evdev' for 'Microsoft Microsoft® Nano Transceiver v2.0'
[ 44.541] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 44.541] (**) Microsoft Microsoft® Nano Transceiver v2.0: always reports core events
[ 44.541] (**) Microsoft Microsoft® Nano Transceiver v2.0: Device: "/dev/input/event2"
[ 44.541] (--) Microsoft Microsoft® Nano Transceiver v2.0: Found 9 mouse buttons
[ 44.541] (--) Microsoft Microsoft® Nano Transceiver v2.0: Found scroll wheel(s)
[ 44.541] (--) Microsoft Microsoft® Nano Transceiver v2.0: Found relative axes
[ 44.541] (--) Microsoft Microsoft® Nano Transceiver v2.0: Found x and y relative axes
[ 44.541] (--) Microsoft Microsoft® Nano Transceiver v2.0: Found absolute axes
[ 44.541] (--) Microsoft Microsoft® Nano Transceiver v2.0: Found keys
[ 44.541] (II) Microsoft Microsoft® Nano Transceiver v2.0: Configuring as mouse
[ 44.541] (II) Microsoft Microsoft® Nano Transceiver v2.0: Configuring as keyboard
[ 44.541] (II) Microsoft Microsoft® Nano Transceiver v2.0: Adding scrollwheel support
[ 44.541] (**) Microsoft Microsoft® Nano Transceiver v2.0: YAxisMapping: buttons 4 and 5
[ 44.541] (**) Microsoft Microsoft® Nano Transceiver v2.0: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 44.541] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.1/usb2/2-1/2-1:1.1/input/input2/event2"
[ 44.541] (II) XINPUT: Adding extended input device "Microsoft Microsoft® Nano Transceiver v2.0" (type: KEYBOARD, id 10)
[ 44.541] (**) Option "xkb_rules" "evdev"
[ 44.541] (**) Option "xkb_model" "evdev"
[ 44.541] (**) Option "xkb_layout" "us"
[ 44.541] (II) Microsoft Microsoft® Nano Transceiver v2.0: initialized for relative axes.
[ 44.541] (WW) Microsoft Microsoft® Nano Transceiver v2.0: ignoring absolute axes.
[ 44.541] (**) Microsoft Microsoft® Nano Transceiver v2.0: (accel) keeping acceleration scheme 1
[ 44.541] (**) Microsoft Microsoft® Nano Transceiver v2.0: (accel) acceleration profile 0
[ 44.541] (**) Microsoft Microsoft® Nano Transceiver v2.0: (accel) acceleration factor: 2.000
[ 44.541] (**) Microsoft Microsoft® Nano Transceiver v2.0: (accel) acceleration threshold: 4
[ 44.542] (II) config/udev: Adding input device Microsoft Microsoft® Nano Transceiver v2.0 (/dev/input/mouse0)
[ 44.542] (II) No input driver specified, ignoring this device.
[ 44.542] (II) This device may have been added with another device file.
[ 44.542] (II) config/udev: Adding input device Microsoft Microsoft® Nano Transceiver v2.0 (/dev/input/event3)
[ 44.542] (**) Microsoft Microsoft® Nano Transceiver v2.0: Applying InputClass "evdev keyboard catchall"
[ 44.542] (II) Using input driver 'evdev' for 'Microsoft Microsoft® Nano Transceiver v2.0'
[ 44.542] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 44.542] (**) Microsoft Microsoft® Nano Transceiver v2.0: always reports core events
[ 44.542] (**) Microsoft Microsoft® Nano Transceiver v2.0: Device: "/dev/input/event3"
[ 44.542] (--) Microsoft Microsoft® Nano Transceiver v2.0: Found 1 mouse buttons
[ 44.542] (--) Microsoft Microsoft® Nano Transceiver v2.0: Found scroll wheel(s)
[ 44.542] (--) Microsoft Microsoft® Nano Transceiver v2.0: Found relative axes
[ 44.542] (--) Microsoft Microsoft® Nano Transceiver v2.0: Found absolute axes
[ 44.542] (--) Microsoft Microsoft® Nano Transceiver v2.0: Found x and y absolute axes
[ 44.542] (--) Microsoft Microsoft® Nano Transceiver v2.0: Found keys
[ 44.542] (II) Microsoft Microsoft® Nano Transceiver v2.0: Configuring as mouse
[ 44.542] (II) Microsoft Microsoft® Nano Transceiver v2.0: Configuring as keyboard
[ 44.542] (II) Microsoft Microsoft® Nano Transceiver v2.0: Adding scrollwheel support
[ 44.542] (**) Microsoft Microsoft® Nano Transceiver v2.0: YAxisMapping: buttons 4 and 5
[ 44.542] (**) Microsoft Microsoft® Nano Transceiver v2.0: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 44.542] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.1/usb2/2-1/2-1:1.2/input/input3/event3"
[ 44.542] (II) XINPUT: Adding extended input device "Microsoft Microsoft® Nano Transceiver v2.0" (type: KEYBOARD, id 11)
[ 44.542] (**) Option "xkb_rules" "evdev"
[ 44.543] (**) Option "xkb_model" "evdev"
[ 44.543] (**) Option "xkb_layout" "us"
[ 44.543] (EE) Microsoft Microsoft® Nano Transceiver v2.0: failed to initialize for relative axes.
[ 44.543] (WW) Microsoft Microsoft® Nano Transceiver v2.0: found 37 axes, limiting to 36.
[ 44.543] (II) Microsoft Microsoft® Nano Transceiver v2.0: initialized for absolute axes.
[ 44.543] (**) Microsoft Microsoft® Nano Transceiver v2.0: (accel) keeping acceleration scheme 1
[ 44.543] (**) Microsoft Microsoft® Nano Transceiver v2.0: (accel) acceleration profile 0
[ 44.543] (**) Microsoft Microsoft® Nano Transceiver v2.0: (accel) acceleration factor: 2.000
[ 44.543] (**) Microsoft Microsoft® Nano Transceiver v2.0: (accel) acceleration threshold: 4
[ 44.543] (II) config/udev: Adding input device Microsoft Microsoft® Nano Transceiver v2.0 (/dev/input/js0)
[ 44.543] (II) No input driver specified, ignoring this device.
[ 44.544] (II) This device may have been added with another device file.
[ 44.544] (II) config/udev: Adding input device HDA Intel Mic (/dev/input/event12)
[ 44.544] (II) No input driver specified, ignoring this device.
[ 44.544] (II) This device may have been added with another device file.
[ 44.544] (II) config/udev: Adding input device HDA Intel Headphone (/dev/input/event13)
[ 44.544] (II) No input driver specified, ignoring this device.
[ 44.544] (II) This device may have been added with another device file.
[ 44.545] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:4004 (/dev/input/event4)
[ 44.545] (**) Logitech Unifying Device. Wireless PID:4004: Applying InputClass "evdev keyboard catchall"
[ 44.545] (II) Using input driver 'evdev' for 'Logitech Unifying Device. Wireless PID:4004'
[ 44.545] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 44.545] (**) Logitech Unifying Device. Wireless PID:4004: always reports core events
[ 44.545] (**) Logitech Unifying Device. Wireless PID:4004: Device: "/dev/input/event4"
[ 44.545] (--) Logitech Unifying Device. Wireless PID:4004: Found 1 mouse buttons
[ 44.545] (--) Logitech Unifying Device. Wireless PID:4004: Found scroll wheel(s)
[ 44.545] (--) Logitech Unifying Device. Wireless PID:4004: Found relative axes
[ 44.545] (--) Logitech Unifying Device. Wireless PID:4004: Found absolute axes
[ 44.545] (--) Logitech Unifying Device. Wireless PID:4004: Found keys
[ 44.545] (II) Logitech Unifying Device. Wireless PID:4004: Configuring as mouse
[ 44.545] (II) Logitech Unifying Device. Wireless PID:4004: Configuring as keyboard
[ 44.545] (II) Logitech Unifying Device. Wireless PID:4004: Adding scrollwheel support
[ 44.545] (**) Logitech Unifying Device. Wireless PID:4004: YAxisMapping: buttons 4 and 5
[ 44.545] (**) Logitech Unifying Device. Wireless PID:4004: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 44.545] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1:1.2/0003:046D:C52B.0006/input/input4/event4"
[ 44.545] (II) XINPUT: Adding extended input device "Logitech Unifying Device. Wireless PID:4004" (type: KEYBOARD, id 12)
[ 44.545] (**) Option "xkb_rules" "evdev"
[ 44.545] (**) Option "xkb_model" "evdev"
[ 44.545] (**) Option "xkb_layout" "us"
[ 44.545] (EE) Logitech Unifying Device. Wireless PID:4004: failed to initialize for relative axes.
[ 44.545] (II) Logitech Unifying Device. Wireless PID:4004: initialized for absolute axes.
[ 44.545] (**) Logitech Unifying Device. Wireless PID:4004: (accel) keeping acceleration scheme 1
[ 44.545] (**) Logitech Unifying Device. Wireless PID:4004: (accel) acceleration profile 0
[ 44.545] (**) Logitech Unifying Device. Wireless PID:4004: (accel) acceleration factor: 2.000
[ 44.545] (**) Logitech Unifying Device. Wireless PID:4004: (accel) acceleration threshold: 4
[ 44.546] (II) config/udev: Adding input device HP Webcam-101 (/dev/input/event10)
[ 44.546] (**) HP Webcam-101: Applying InputClass "evdev keyboard catchall"
[ 44.546] (II) Using input driver 'evdev' for 'HP Webcam-101'
[ 44.546] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 44.546] (**) HP Webcam-101: always reports core events
[ 44.546] (**) HP Webcam-101: Device: "/dev/input/event10"
[ 44.546] (--) HP Webcam-101: Found keys
[ 44.546] (II) HP Webcam-101: Configuring as keyboard
[ 44.546] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.7/usb8/8-4/8-4:1.0/input/input10/event10"
[ 44.546] (II) XINPUT: Adding extended input device "HP Webcam-101" (type: KEYBOARD, id 13)
[ 44.546] (**) Option "xkb_rules" "evdev"
[ 44.546] (**) Option "xkb_model" "evdev"
[ 44.546] (**) Option "xkb_layout" "us"
[ 44.546] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 44.547] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 44.547] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 44.547] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 44.547] (**) AT Translated Set 2 keyboard: always reports core events
[ 44.547] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 44.547] (--) AT Translated Set 2 keyboard: Found keys
[ 44.547] (II) AT Translated Set 2 keyboard: Configuring as keyboard
[ 44.547] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 44.547] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 14)
[ 44.547] (**) Option "xkb_rules" "evdev"
[ 44.547] (**) Option "xkb_model" "evdev"
[ 44.547] (**) Option "xkb_layout" "us"
[ 44.547] (II) config/udev: Adding input device PC Speaker (/dev/input/event8)
[ 44.547] (II) No input driver specified, ignoring this device.
[ 44.547] (II) This device may have been added with another device file.
[ 44.548] (II) config/udev: Adding input device HP WMI hotkeys (/dev/input/event9)
[ 44.548] (**) HP WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[ 44.548] (II) Using input driver 'evdev' for 'HP WMI hotkeys'
[ 44.548] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 44.548] (**) HP WMI hotkeys: always reports core events
[ 44.548] (**) HP WMI hotkeys: Device: "/dev/input/event9"
[ 44.548] (--) HP WMI hotkeys: Found keys
[ 44.548] (II) HP WMI hotkeys: Configuring as keyboard
[ 44.548] (**) Option "config_info" "udev:/sys/devices/virtual/input/input9/event9"
[ 44.548] (II) XINPUT: Adding extended input device "HP WMI hotkeys" (type: KEYBOARD, id 15)
[ 44.548] (**) Option "xkb_rules" "evdev"
[ 44.548] (**) Option "xkb_model" "evdev"
[ 44.548] (**) Option "xkb_layout" "us"Here for comparison is an older log
[ 4261.134]
X.Org X Server 1.11.4
Release Date: 2012-01-27
[ 4261.134] X Protocol Version 11, Revision 0
[ 4261.134] Build Operating System: Linux 3.2.2-1-ARCH i686
[ 4261.134] Current Operating System: Linux Darkstar 3.2.4-1-ARCH #1 SMP PREEMPT Sat Feb 4 11:21:15 UTC 2012 i686
[ 4261.135] Kernel command line: root=/dev/sda6 ro
[ 4261.135] Build Date: 29 January 2012 03:41:53PM
[ 4261.135]
[ 4261.135] Current version of pixman: 0.24.2
[ 4261.135] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 4261.135] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 4261.135] (==) Log file: "/var/log/Xorg.1.log", Time: Mon Feb 6 22:04:47 2012
[ 4261.135] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 4261.135] (==) No Layout section. Using the first Screen section.
[ 4261.135] (==) No screen section available. Using defaults.
[ 4261.135] (**) |-->Screen "Default Screen Section" (0)
[ 4261.135] (**) | |-->Monitor "<default monitor>"
[ 4261.135] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 4261.135] (==) Automatically adding devices
[ 4261.135] (==) Automatically enabling devices
[ 4261.136] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 4261.136] Entry deleted from font path.
[ 4261.136] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 4261.136] Entry deleted from font path.
[ 4261.136] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 4261.136] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 4261.136] Entry deleted from font path.
[ 4261.136] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 4261.136] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/
[ 4261.136] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 4261.136] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 4261.136] (II) Loader magic: 0x8228580
[ 4261.136] (II) Module ABI versions:
[ 4261.136] X.Org ANSI C Emulation: 0.4
[ 4261.136] X.Org Video Driver: 11.0
[ 4261.136] X.Org XInput driver : 13.0
[ 4261.136] X.Org Server Extension : 6.0
[ 4261.137] (--) PCI:*(0:0:2:0) 8086:2a42:103c:1605 rev 7, Mem @ 0xd0000000/4194304, 0xc0000000/268435456, I/O @ 0x00004110/8
[ 4261.137] (--) PCI: (0:0:2:1) 8086:2a43:103c:1605 rev 7, Mem @ 0xd2400000/1048576
[ 4261.138] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 4261.138] (II) LoadModule: "extmod"
[ 4261.138] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 4261.138] (II) Module extmod: vendor="X.Org Foundation"
[ 4261.138] compiled for 1.11.4, module version = 1.0.0
[ 4261.138] Module class: X.Org Server Extension
[ 4261.138] ABI class: X.Org Server Extension, version 6.0
[ 4261.138] (II) Loading extension MIT-SCREEN-SAVER
[ 4261.138] (II) Loading extension XFree86-VidModeExtension
[ 4261.138] (II) Loading extension XFree86-DGA
[ 4261.138] (II) Loading extension DPMS
[ 4261.138] (II) Loading extension XVideo
[ 4261.138] (II) Loading extension XVideo-MotionCompensation
[ 4261.138] (II) Loading extension X-Resource
[ 4261.138] (II) LoadModule: "dbe"
[ 4261.138] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 4261.139] (II) Module dbe: vendor="X.Org Foundation"
[ 4261.139] compiled for 1.11.4, module version = 1.0.0
[ 4261.139] Module class: X.Org Server Extension
[ 4261.139] ABI class: X.Org Server Extension, version 6.0
[ 4261.139] (II) Loading extension DOUBLE-BUFFER
[ 4261.139] (II) LoadModule: "glx"
[ 4261.139] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 4261.139] (II) Module glx: vendor="X.Org Foundation"
[ 4261.139] compiled for 1.11.4, module version = 1.0.0
[ 4261.139] ABI class: X.Org Server Extension, version 6.0
[ 4261.139] (==) AIGLX enabled
[ 4261.139] (II) Loading extension GLX
[ 4261.139] (II) LoadModule: "record"
[ 4261.139] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 4261.140] (II) Module record: vendor="X.Org Foundation"
[ 4261.140] compiled for 1.11.4, module version = 1.13.0
[ 4261.140] Module class: X.Org Server Extension
[ 4261.140] ABI class: X.Org Server Extension, version 6.0
[ 4261.140] (II) Loading extension RECORD
[ 4261.140] (II) LoadModule: "dri"
[ 4261.140] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 4261.140] (II) Module dri: vendor="X.Org Foundation"
[ 4261.140] compiled for 1.11.4, module version = 1.0.0
[ 4261.140] ABI class: X.Org Server Extension, version 6.0
[ 4261.140] (II) Loading extension XFree86-DRI
[ 4261.140] (II) LoadModule: "dri2"
[ 4261.140] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 4261.140] (II) Module dri2: vendor="X.Org Foundation"
[ 4261.141] compiled for 1.11.4, module version = 1.2.0
[ 4261.141] ABI class: X.Org Server Extension, version 6.0
[ 4261.141] (II) Loading extension DRI2
[ 4261.141] (==) Matched intel as autoconfigured driver 0
[ 4261.141] (==) Matched vesa as autoconfigured driver 1
[ 4261.141] (==) Matched fbdev as autoconfigured driver 2
[ 4261.141] (==) Assigned the driver to the xf86ConfigLayout
[ 4261.141] (II) LoadModule: "intel"
[ 4261.141] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 4261.141] (II) Module intel: vendor="X.Org Foundation"
[ 4261.141] compiled for 1.11.2, module version = 2.17.0
[ 4261.141] Module class: X.Org Video Driver
[ 4261.141] ABI class: X.Org Video Driver, version 11.0
[ 4261.141] (II) LoadModule: "vesa"
[ 4261.141] (WW) Warning, couldn't open module vesa
[ 4261.141] (II) UnloadModule: "vesa"
[ 4261.141] (II) Unloading vesa
[ 4261.141] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 4261.141] (II) LoadModule: "fbdev"
[ 4261.142] (WW) Warning, couldn't open module fbdev
[ 4261.142] (II) UnloadModule: "fbdev"
[ 4261.142] (II) Unloading fbdev
[ 4261.142] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 4261.142] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server
[ 4261.142] (++) using VT number 8
[ 4262.387] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 4262.387] drmOpenDevice: node name is /dev/dri/card0
[ 4262.387] drmOpenDevice: open result is 8, (OK)
[ 4262.387] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[ 4262.387] drmOpenDevice: node name is /dev/dri/card0
[ 4262.387] drmOpenDevice: open result is 8, (OK)
[ 4262.387] drmOpenByBusid: drmOpenMinor returns 8
[ 4262.387] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[ 4262.387] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 4262.387] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 4262.387] (==) intel(0): RGB weight 888
[ 4262.387] (==) intel(0): Default visual is TrueColor
[ 4262.387] (II) intel(0): Integrated Graphics Chipset: Intel(R) GM45
[ 4262.387] (--) intel(0): Chipset: "GM45"
[ 4262.387] (**) intel(0): Relaxed fencing enabled
[ 4262.387] (**) intel(0): Wait on SwapBuffers? enabled
[ 4262.387] (**) intel(0): Triple buffering? enabled
[ 4262.387] (**) intel(0): Framebuffer tiled
[ 4262.387] (**) intel(0): Pixmaps tiled
[ 4262.387] (**) intel(0): 3D buffers tiled
[ 4262.387] (**) intel(0): SwapBuffers wait enabled
[ 4262.387] (==) intel(0): video overlay key set to 0x101fe
[ 4262.387] (II) intel(0): Output LVDS1 has no monitor section
[ 4262.387] (II) intel(0): found backlight control interface /sys/class/backlight/acpi_video0
[ 4262.402] (II) intel(0): Output VGA1 has no monitor section
[ 4262.422] (II) intel(0): Output HDMI1 has no monitor section
[ 4262.462] (II) intel(0): Output DP1 has no monitor section
[ 4262.502] (II) intel(0): Output DP2 has no monitor section
[ 4262.503] (II) intel(0): EDID for output LVDS1
[ 4262.503] (II) intel(0): Manufacturer: LGD Model: 2ac Serial#: 0
[ 4262.503] (II) intel(0): Year: 2010 Week: 0
[ 4262.503] (II) intel(0): EDID Version: 1.3
[ 4262.503] (II) intel(0): Digital Display Input
[ 4262.503] (II) intel(0): Max Image Size [cm]: horiz.: 34 vert.: 19
[ 4262.503] (II) intel(0): Gamma: 2.20
[ 4262.503] (II) intel(0): No DPMS capabilities specified
[ 4262.503] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 4262.503] (II) intel(0): First detailed timing is preferred mode
[ 4262.503] (II) intel(0): redX: 0.616 redY: 0.371 greenX: 0.355 greenY: 0.606
[ 4262.503] (II) intel(0): blueX: 0.152 blueY: 0.100 whiteX: 0.313 whiteY: 0.329
[ 4262.503] (II) intel(0): Manufacturer's mask: 0
[ 4262.503] (II) intel(0): Supported detailed timing:
[ 4262.503] (II) intel(0): clock: 69.3 MHz Image Size: 344 x 194 mm
[ 4262.503] (II) intel(0): h_active: 1366 h_sync: 1398 h_sync_end 1430 h_blank_end 1486 h_border: 0
[ 4262.503] (II) intel(0): v_active: 768 v_sync: 770 v_sync_end 774 v_blanking: 782 v_border: 0
[ 4262.503] (II) intel(0): LG Display
[ 4262.503] (II) intel(0): LP156WH2-TLQB
[ 4262.503] (II) intel(0): EDID (in hex):
[ 4262.503] (II) intel(0): 00ffffffffffff0030e4ac0200000000
[ 4262.503] (II) intel(0): 00140103802213780ac1259d5f5b9b27
[ 4262.503] (II) intel(0): 19505400000001010101010101010101
[ 4262.503] (II) intel(0): 010101010101121b567850000e302020
[ 4262.503] (II) intel(0): 240058c2100000190000000000000000
[ 4262.503] (II) intel(0): 00000000000000000000000000fe004c
[ 4262.503] (II) intel(0): 4720446973706c61790a2020000000fe
[ 4262.503] (II) intel(0): 004c503135365748322d544c514200c1
[ 4262.503] (II) intel(0): EDID vendor "LGD", prod id 684
[ 4262.503] (II) intel(0): Printing DDC gathered Modelines:
[ 4262.503] (II) intel(0): Modeline "1366x768"x0.0 69.30 1366 1398 1430 1486 768 770 774 782 -hsync -vsync (46.6 kHz)
[ 4262.503] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[ 4262.503] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 4262.503] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 4262.503] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[ 4262.503] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[ 4262.503] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[ 4262.503] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[ 4262.503] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[ 4262.503] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[ 4262.503] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[ 4262.503] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[ 4262.503] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[ 4262.503] (II) intel(0): Printing probed modes for output LVDS1
[ 4262.503] (II) intel(0): Modeline "1366x768"x59.6 69.30 1366 1398 1430 1486 768 770 774 782 -hsync -vsync (46.6 kHz)
[ 4262.503] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 4262.503] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 4262.503] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 4262.504] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 4262.522] (II) intel(0): EDID for output VGA1
[ 4262.542] (II) intel(0): EDID for output HDMI1
[ 4262.582] (II) intel(0): EDID for output DP1
[ 4262.622] (II) intel(0): EDID for output DP2
[ 4262.622] (II) intel(0): Output LVDS1 connected
[ 4262.623] (II) intel(0): Output VGA1 disconnected
[ 4262.623] (II) intel(0): Output HDMI1 disconnected
[ 4262.623] (II) intel(0): Output DP1 disconnected
[ 4262.623] (II) intel(0): Output DP2 disconnected
[ 4262.623] (II) intel(0): Using exact sizes for initial modes
[ 4262.623] (II) intel(0): Output LVDS1 using initial mode 1366x768
[ 4262.623] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 4262.623] (II) intel(0): Kernel page flipping support detected, enabling
[ 4262.623] (**) intel(0): Display dimensions: (340, 190) mm
[ 4262.623] (**) intel(0): DPI set to (102, 102)
[ 4262.623] (II) Loading sub module "fb"
[ 4262.623] (II) LoadModule: "fb"
[ 4262.623] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 4262.623] (II) Module fb: vendor="X.Org Foundation"
[ 4262.623] compiled for 1.11.4, module version = 1.0.0
[ 4262.623] ABI class: X.Org ANSI C Emulation, version 0.4
[ 4262.623] (II) Loading sub module "dri2"
[ 4262.623] (II) LoadModule: "dri2"
[ 4262.623] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 4262.623] (II) Module dri2: vendor="X.Org Foundation"
[ 4262.623] compiled for 1.11.4, module version = 1.2.0
[ 4262.623] ABI class: X.Org Server Extension, version 6.0
[ 4262.623] (==) Depth 24 pixmap format is 32 bpp
[ 4262.623] (II) intel(0): [DRI2] Setup complete
[ 4262.624] (II) intel(0): [DRI2] DRI driver: i965
[ 4262.624] (II) intel(0): Allocated new frame buffer 1408x768 stride 5632, tiled
[ 4262.635] (II) UXA(0): Driver registered support for the following operations:
[ 4262.635] (II) solid
[ 4262.635] (II) copy
[ 4262.635] (II) composite (RENDER acceleration)
[ 4262.635] (II) put_image
[ 4262.635] (II) get_image
[ 4262.635] (==) intel(0): Backing store disabled
[ 4262.635] (==) intel(0): Silken mouse enabled
[ 4262.635] (II) intel(0): Initializing HW Cursor
[ 4262.693] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 4262.695] (==) intel(0): DPMS enabled
[ 4262.695] (==) intel(0): Intel XvMC decoder enabled
[ 4262.695] (II) intel(0): Set up textured video
[ 4262.695] (II) intel(0): [XvMC] xvmc_vld driver initialized.
[ 4262.695] (II) intel(0): direct rendering: DRI2 Enabled
[ 4262.695] (==) intel(0): hotplug detection: "enabled"
[ 4262.695] (--) RandR disabled
[ 4262.696] (II) Initializing built-in extension Generic Event Extension
[ 4262.696] (II) Initializing built-in extension SHAPE
[ 4262.696] (II) Initializing built-in extension MIT-SHM
[ 4262.696] (II) Initializing built-in extension XInputExtension
[ 4262.696] (II) Initializing built-in extension XTEST
[ 4262.696] (II) Initializing built-in extension BIG-REQUESTS
[ 4262.696] (II) Initializing built-in extension SYNC
[ 4262.696] (II) Initializing built-in extension XKEYBOARD
[ 4262.696] (II) Initializing built-in extension XC-MISC
[ 4262.696] (II) Initializing built-in extension SECURITY
[ 4262.696] (II) Initializing built-in extension XINERAMA
[ 4262.696] (II) Initializing built-in extension XFIXES
[ 4262.696] (II) Initializing built-in extension RENDER
[ 4262.696] (II) Initializing built-in extension RANDR
[ 4262.696] (II) Initializing built-in extension COMPOSITE
[ 4262.696] (II) Initializing built-in extension DAMAGE
[ 4262.708] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 4262.708] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 4262.708] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 4262.708] (II) AIGLX: enabled GLX_SGI_make_current_read
[ 4262.708] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 4262.708] (II) AIGLX: Loaded and initialized i965
[ 4262.708] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 4262.709] (II) intel(0): Setting screen physical size to 361 x 203
[ 4262.751] (II) XKB: Reusing cached keymap
[ 4262.754] (II) config/udev: Adding input device Power Button (/dev/input/event8)
[ 4262.754] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 4262.754] (II) LoadModule: "evdev"
[ 4262.755] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 4262.755] (II) Module evdev: vendor="X.Org Foundation"
[ 4262.755] compiled for 1.10.99.902, module version = 2.6.0
[ 4262.755] Module class: X.Org XInput Driver
[ 4262.755] ABI class: X.Org XInput driver, version 13.0
[ 4262.755] (II) Using input driver 'evdev' for 'Power Button'
[ 4262.755] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 4262.755] Option "XkbRules" "evdev"
[ 4262.755] Option "XkbModel" "evdev"
[ 4262.755] Option "XkbLayout" "us"
[ 4262.755] Option "_source" "server/udev"
[ 4262.755] Option "name" "Power Button"
[ 4262.755] Option "path" "/dev/input/event8"
[ 4262.755] Option "device" "/dev/input/event8"
[ 4262.755] Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input8/event8"
[ 4262.755] Option "driver" "evdev"
[ 4262.755] (**) Power Button: always reports core events
[ 4262.755] (**) Power Button: Device: "/dev/input/event8"
[ 4262.755] (--) Power Button: Found keys
[ 4262.755] (II) Power Button: Configuring as keyboard
[ 4262.755] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input8/event8"
[ 4262.755] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 4262.755] (**) Option "xkb_rules" "evdev"
[ 4262.755] (**) Option "xkb_model" "evdev"
[ 4262.755] (**) Option "xkb_layout" "us"
[ 4262.786] (II) config/udev: Adding input device Video Bus (/dev/input/event13)
[ 4262.786] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 4262.786] (II) Using input driver 'evdev' for 'Video Bus'
[ 4262.786] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 4262.786] Option "XkbRules" "evdev"
[ 4262.786] Option "XkbModel" "evdev"
[ 4262.786] Option "XkbLayout" "us"
[ 4262.786] Option "_source" "server/udev"
[ 4262.786] Option "name" "Video Bus"
[ 4262.786] Option "path" "/dev/input/event13"
[ 4262.786] Option "device" "/dev/input/event13"
[ 4262.786] Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input13/event13"
[ 4262.786] Option "driver" "evdev"
[ 4262.786] (**) Video Bus: always reports core events
[ 4262.786] (**) Video Bus: Device: "/dev/input/event13"
[ 4262.786] (--) Video Bus: Found keys
[ 4262.786] (II) Video Bus: Configuring as keyboard
[ 4262.786] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input13/event13"
[ 4262.786] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 4262.786] (**) Option "xkb_rules" "evdev"
[ 4262.786] (**) Option "xkb_model" "evdev"
[ 4262.786] (**) Option "xkb_layout" "us"
[ 4262.786] (II) XKB: Reusing cached keymap
[ 4262.787] (II) config/udev: Adding input device Power Button (/dev/input/event6)
[ 4262.787] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 4262.787] (II) Using input driver 'evdev' for 'Power Button'
[ 4262.787] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 4262.787] Option "XkbRules" "evdev"
[ 4262.787] Option "XkbModel" "evdev"
[ 4262.787] Option "XkbLayout" "us"
[ 4262.787] Option "_source" "server/udev"
[ 4262.787] Option "name" "Power Button"
[ 4262.787] Option "path" "/dev/input/event6"
[ 4262.787] Option "device" "/dev/input/event6"
[ 4262.787] Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input6/event6"
[ 4262.787] Option "driver" "evdev"
[ 4262.787] (**) Power Button: always reports core events
[ 4262.787] (**) Power Button: Device: "/dev/input/event6"
[ 4262.787] (--) Power Button: Found keys
[ 4262.787] (II) Power Button: Configuring as keyboard
[ 4262.787] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input6/event6"
[ 4262.787] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 4262.787] (**) Option "xkb_rules" "evdev"
[ 4262.787] (**) Option "xkb_model" "evdev"
[ 4262.787] (**) Option "xkb_layout" "us"
[ 4262.787] (II) XKB: Reusing cached keymap
[ 4262.788] (II) config/udev: Adding input device Lid Switch (/dev/input/event7)
[ 4262.788] (II) No input driver specified, ignoring this device.
[ 4262.788] (II) This device may have been added with another device file.
[ 4262.788] (II) config/udev: Adding input device Microsoft Microsoft® Nano Transceiver v2.0 (/dev/input/event1)
[ 4262.788] (**) Microsoft Microsoft® Nano Transceiver v2.0: Applying InputClass "evdev keyboard catchall"
[ 4262.788] (II) Using input driver 'evdev' for 'Microsoft Microsoft® Nano Transceiver v2.0'
[ 4262.788] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 4262.788] Option "XkbRules" "evdev"
[ 4262.788] Option "XkbModel" "evdev"
[ 4262.788] Option "XkbLayout" "us"
[ 4262.788] Option "_source" "server/udev"
[ 4262.788] Option "name" "Microsoft Microsoft® Nano Transceiver v2.0"
[ 4262.788] Option "path" "/dev/input/event1"
[ 4262.788] Option "device" "/dev/input/event1"
[ 4262.788] Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1:1.0/input/input1/event1"
[ 4262.788] Option "driver" "evdev"
[ 4262.788] (**) Microsoft Microsoft® Nano Transceiver v2.0: always reports core events
[ 4262.788] (**) Microsoft Microsoft® Nano Transceiver v2.0: Device: "/dev/input/event1"
[ 4262.788] (--) Microsoft Microsoft® Nano Transceiver v2.0: Found keys
[ 4262.788] (II) Microsoft Microsoft® Nano Transceiver v2.0: Configuring as keyboard
[ 4262.788] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1:1.0/input/input1/event1"
[ 4262.788] (II) XINPUT: Adding extended input device "Microsoft Microsoft® Nano Transceiver v2.0" (type: KEYBOARD, id 9)
[ 4262.788] (**) Option "xkb_rules" "evdev"
[ 4262.788] (**) Option "xkb_model" "evdev"
[ 4262.788] (**) Option "xkb_layout" "us"
[ 4262.788] (II) XKB: Reusing cached keymap
[ 4262.789] (II) config/udev: Adding input device Microsoft Microsoft® Nano Transceiver v2.0 (/dev/input/event2)
[ 4262.789] (**) Microsoft Microsoft® Nano Transceiver v2.0: Applying InputClass "evdev pointer catchall"
[ 4262.789] (**) Microsoft Microsoft® Nano Transceiver v2.0: Applying InputClass "evdev keyboard catchall"
[ 4262.789] (II) Using input driver 'evdev' for 'Microsoft Microsoft® Nano Transceiver v2.0'
[ 4262.789] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 4262.789] Option "XkbRules" "evdev"
[ 4262.789] Option "XkbModel" "evdev"
[ 4262.789] Option "XkbLayout" "us"
[ 4262.789] Option "_source" "server/udev"
[ 4262.789] Option "name" "Microsoft Microsoft® Nano Transceiver v2.0"
[ 4262.789] Option "path" "/dev/input/event2"
[ 4262.789] Option "device" "/dev/input/event2"
[ 4262.789] Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1:1.1/input/input2/event2"
[ 4262.789] Option "driver" "evdev"
[ 4262.789] (**) Microsoft Microsoft® Nano Transceiver v2.0: always reports core events
[ 4262.789] (**) Microsoft Microsoft® Nano Transceiver v2.0: Device: "/dev/input/event2"
[ 4262.789] (--) Microsoft Microsoft® Nano Transceiver v2.0: Found 9 mouse buttons
[ 4262.789] (--) Microsoft Microsoft® Nano Transceiver v2.0: Found scroll wheel(s)
[ 4262.789] (--) Microsoft Microsoft® Nano Transceiver v2.0: Found relative axes
[ 4262.789] (--) Microsoft Microsoft® Nano Transceiver v2.0: Found x and y relative axes
[ 4262.789] (--) Microsoft Microsoft® Nano Transceiver v2.0: Found absolute axes
[ 4262.789] (--) Microsoft Microsoft® Nano Transceiver v2.0: Found keys
[ 4262.789] (II) Microsoft Microsoft® Nano Transceiver v2.0: Configuring as mouse
[ 4262.789] (II) Microsoft Microsoft® Nano Transceiver v2.0: Configuring as keyboard
[ 4262.789] (II) Microsoft Microsoft® Nano Transceiver v2.0: Adding scrollwheel support
[ 4262.789] (**) Microsoft Microsoft® Nano Transceiver v2.0: YAxisMapping: buttons 4 and 5
[ 4262.789] (**) Microsoft Microsoft® Nano Transceiver v2.0: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 4262.789] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1:1.1/input/input2/event2"
[ 4262.789] (II) XINPUT: Adding extended input device "Microsoft Microsoft® Nano Transceiver v2.0" (type: KEYBOARD, id 10)
[ 4262.789] (**) Option "xkb_rules" "evdev"
[ 4262.789] (**) Option "xkb_model" "evdev"
[ 4262.789] (**) Option "xkb_layout" "us"
[ 4262.790] (II) XKB: Reusing cached keymap
[ 4262.790] (II) Microsoft Microsoft® Nano Transceiver v2.0: initialized for relative axes.
[ 4262.790] (WW) Microsoft Microsoft® Nano Transceiver v2.0: ignoring absolute axes.
[ 4262.790] (**) Microsoft Microsoft® Nano Transceiver v2.0: (accel) keeping acceleration scheme 1
[ 4262.790] (**) Microsoft Microsoft® Nano Transceiver v2.0: (accel) acceleration profile 0
[ 4262.790] (**) Microsoft Microsoft® Nano Transceiver v2.0: (accel) acceleration factor: 2.000
[ 4262.790] (**) Microsoft Microsoft® Nano Transceiver v2.0: (accel) acceleration threshold: 4
[ 4262.790] (II) config/udev: Adding input device Microsoft Microsoft® Nano Transceiver v2.0 (/dev/input/mouse0)
[ 4262.790] (II) No input driver specified, ignoring this device.
[ 4262.790] (II) This device may have been added with another device file.
[ 4262.791] (II) config/udev: Adding input device Microsoft Microsoft® Nano Transceiver v2.0 (/dev/input/event3)
[ 4262.791] (**) Microsoft Microsoft® Nano Transceiver v2.0: Applying InputClass "evdev keyboard catchall"
[ 4262.791] (II) Using input driver 'evdev' for 'Microsoft Microsoft® Nano Transceiver v2.0'
[ 4262.791] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 4262.791] Option "XkbRules" "evdev"
[ 4262.791] Option "XkbModel" "evdev"
[ 4262.791] Option "XkbLayout" "us"
[ 4262.791] Option "_source" "server/udev"
[ 4262.791] Option "name" "Microsoft Microsoft® Nano Transceiver v2.0"
[ 4262.791] Option "path" "/dev/input/event3"
[ 4262.791] Option "device" "/dev/input/event3"
[ 4262.791] Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1:1.2/input/input3/event3"
[ 4262.791] Option "driver" "evdev"
[ 4262.791] (**) Microsoft Microsoft® Nano Transceiver v2.0: always reports core events
[ 4262.791] (**) Microsoft Microsoft® Nano Transceiver v2.0: Device: "/dev/input/event3"
[ 4262.791] (--) Microsoft Microsoft® Nano Transceiver v2.0: Found 1 mouse buttons
[ 4262.791] (--) Microsoft Microsoft® Nano Transceiver v2.0: Found scroll wheel(s)
[ 4262.791] (--) Microsoft Microsoft® Nano Transceiver v2.0: Found relative axes
[ 4262.791] (--) Microsoft Microsoft® Nano Transceiver v2.0: Found absolute axes
[ 4262.791] (--) Microsoft Microsoft® Nano Transceiver v2.0: Found x and y absolute axes
[ 4262.791] (--) Microsoft Microsoft® Nano Transceiver v2.0: Found keys
[ 4262.791] (II) Microsoft Microsoft® Nano Transceiver v2.0: Configuring as mouse
[ 4262.791] (II) Microsoft Microsoft® Nano Transceiver v2.0: Configuring as keyboard
[ 4262.791] (II) Microsoft Microsoft® Nano Transceiver v2.0: Adding scrollwheel support
[ 4262.791] (**) Microsoft Microsoft® Nano Transceiver v2.0: YAxisMapping: buttons 4 and 5
[ 4262.791] (**) Microsoft Microsoft® Nano Transceiver v2.0: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 4262.791] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1:1.2/input/input3/event3"
[ 4262.791] (II) XINPUT: Adding extended input device "Microsoft Microsoft® Nano Transceiver v2.0" (type: KEYBOARD, id 11)
[ 4262.791] (**) Option "xkb_rules" "evdev"
[ 4262.791] (**) Option "xkb_model" "evdev"
[ 4262.791] (**) Option "xkb_layout" "us"
[ 4262.791] (II) XKB: Reusing cached keymap
[ 4262.791] (EE) Microsoft Microsoft® Nano Transceiver v2.0: failed to initialize for relative axes.
[ 4262.791] (WW) Microsoft Microsoft® Nano Transceiver v2.0: found 37 axes, limiting to 36.
[ 4262.792] (II) Microsoft Microsoft® Nano Transceiver v2.0: initialized for absolute axes.
[ 4262.792] (**) Microsoft Microsoft® Nano Transceiver v2.0: (accel) keeping acceleration scheme 1
[ 4262.792] (**) Microsoft Microsoft® Nano Transceiver v2.0: (accel) acceleration profile 0
[ 4262.792] (**) Microsoft Microsoft® Nano Transceiver v2.0: (accel) acceleration factor: 2.000
[ 4262.792] (**) Microsoft Microsoft® Nano Transceiver v2.0: (accel) acceleration threshold: 4
[ 4262.792] (II) config/udev: Adding input device Microsoft Microsoft® Nano Transceiver v2.0 (/dev/input/js0)
[ 4262.792] (II) No input driver specified, ignoring this device.
[ 4262.792] (II) This device may have been added with another device file.
[ 4262.792] (II) config/udev: Adding input device HDA Intel Mic (/dev/input/event10)
[ 4262.792] (II) No input driver specified, ignoring this device.
[ 4262.792] (II) This device may have been added with another device file.
[ 4262.793] (II) config/udev: Adding input device HDA Intel Headphone (/dev/input/event11)
[ 4262.793] (II) No input driver specified, ignoring this device.
[ 4262.793] (II) This device may have been added with another device file.
[ 4262.793] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:4004 (/dev/input/event4)
[ 4262.793] (**) Logitech Unifying Device. Wireless PID:4004: Applying InputClass "evdev keyboard catchall"
[ 4262.793] (II) Using input driver 'evdev' for 'Logitech Unifying Device. Wireless PID:4004'
[ 4262.793] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 4262.793] Option "XkbRules" "evdev"
[ 4262.793] Option "XkbModel" "evdev"
[ 4262.793] Option "XkbLayout" "us"
[ 4262.793] Option "_source" "server/udev"
[ 4262.793] Option "name" "Logitech Unifying Device. Wireless PID:4004"
[ 4262.793] Option "path" "/dev/input/event4"
[ 4262.793] Option "device" "/dev/input/event4"
[ 4262.793] Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb5/5-2/5-2:1.2/0003:046D:C52B.0006/input/input4/event4"
[ 4262.793] Option "driver" "evdev"
[ 4262.793] (**) Logitech Unifying Device. Wireless PID:4004: always reports core events
[ 4262.793] (**) Logitech Unifying Device. Wireless PID:4004: Device: "/dev/input/event4"
[ 4262.793] (--) Logitech Unifying Device. Wireless PID:4004: Found 1 mouse buttons
[ 4262.793] (--) Logitech Unifying Device. Wireless PID:4004: Found scroll wheel(s)
[ 4262.793] (--) Logitech Unifying Device. Wireless PID:4004: Found relative axes
[ 4262.793] (--) Logitech Unifying Device. Wireless PID:4004: Found absolute axes
[ 4262.793] (--) Logitech Unifying Device. Wireless PID:4004: Found keys
[ 4262.793] (II) Logitech Unifying Device. Wireless PID:4004: Configuring as mouse
[ 4262.793] (II) Logitech Unifying Device. Wireless PID:4004: Configuring as keyboard
[ 4262.793] (II) Logitech Unifying Device. Wireless PID:4004: Adding scrollwheel support
[ 4262.793] (**) Logitech Unifying Device. Wireless PID:4004: YAxisMapping: buttons 4 and 5
[ 4262.793] (**) Logitech Unifying Device. Wireless PID:4004: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 4262.794] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb5/5-2/5-2:1.2/0003:046D:C52B.0006/input/input4/event4"
[ 4262.794] (II) XINPUT: Adding extended input device "Logitech Unifying Device. Wireless PID:4004" (type: KEYBOARD, id 12)
[ 4262.794] (**) Option "xkb_rules" "evdev"
[ 4262.794] (**) Option "xkb_model" "evdev"
[ 4262.794] (**) Option "xkb_layout" "us"
[ 4262.794] (II) XKB: Reusing cached keymap
[ 4262.794] (EE) Logitech Unifying Device. Wireless PID:4004: failed to initialize for relative axes.
[ 4262.794] (II) Logitech Unifying Device. Wireless PID:4004: initialized for absolute axes.
[ 4262.794] (**) Logitech Unifying Device. Wireless PID:4004: (accel) keeping acceleration scheme 1
[ 4262.794] (**) Logitech Unifying Device. Wireless PID:4004: (accel) acceleration profile 0
[ 4262.794] (**) Logitech Unifying Device. Wireless PID:4004: (accel) acceleration factor: 2.000
[ 4262.794] (**) Logitech Unifying Device. Wireless PID:4004: (accel) acceleration threshold: 4
[ 4262.794] (II) config/udev: Adding input device HP Webcam-101 (/dev/input/event12)
[ 4262.794] (**) HP Webcam-101: Applying InputClass "evdev keyboard catchall"
[ 4262.794] (II) Using input driver 'evdev' for 'HP Webcam-101'
[ 4262.794] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 4262.794] Option "XkbRules" "evdev"
[ 4262.794] Option "XkbModel" "evdev"
[ 4262.794] Option "XkbLayout" "us"
[ 4262.795] Option "_source" "server/udev"
[ 4262.795] Option "name" "HP Webcam-101"
[ 4262.795] Option "path" "/dev/input/event12"
[ 4262.795] Option "device" "/dev/input/event12"
[ 4262.795] Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.7/usb2/2-4/2-4:1.0/input/input12/event12"
[ 4262.795] Option "driver" "evdev"
[ 4262.795] (**) HP Webcam-101: always reports core events
[ 4262.795] (**) HP Webcam-101: Device: "/dev/input/event12"
[ 4262.795] (--) HP Webcam-101: Found keys
[ 4262.795] (II) HP Webcam-101: Configuring as keyboard
[ 4262.795] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.7/usb2/2-4/2-4:1.0/input/input12/event12"
[ 4262.795] (II) XINPUT: Adding extended input device "HP Webcam-101" (type: KEYBOARD, id 13)
[ 4262.795] (**) Option "xkb_rules" "evdev"
[ 4262.795] (**) Option "xkb_model" "evdev"
[ 4262.795] (**) Option "xkb_layout" "us"
[ 4262.795] (II) XKB: Reusing cached keymap
[ 4262.795] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 4262.795] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 4262.795] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 4262.795] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 4262.795] Option "XkbRules" "evdev"
[ 4262.795] Option "XkbModel" "evdev"
[ 4262.795] Option "XkbLayout" "us"
[ 4262.795] Option "_source" "server/udev"
[ 4262.795] Option "name" "AT Translated Set 2 keyboard"
[ 4262.795] Option "path" "/dev/input/event0"
[ 4262.795] Option "device" "/dev/input/event0"
[ 4262.795] Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 4262.795] Option "driver" "evdev"
[ 4262.795] (**) AT Translated Set 2 keyboard: always reports core events
[ 4262.795] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 4262.796] (--) AT Translated Set 2 keyboard: Found keys
[ 4262.796] (II) AT Translated Set 2 keyboard: Configuring as keyboard
[ 4262.796] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 4262.796] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 14)
[ 4262.796] (**) Option "xkb_rules" "evdev"
[ 4262.796] (**) Option "xkb_model" "evdev"
[ 4262.796] (**) Option "xkb_layout" "us"
[ 4262.796] (II) XKB: Reusing cached keymap
[ 4262.796] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event14)
[ 4262.796] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 4262.796] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 4262.796] (II) LoadModule: "synaptics"
[ 4262.796] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 4262.797] (II) Module synaptics: vendor="X.Org Foundation"
[ 4262.797] compiled for 1.11.0, module version = 1.5.0
[ 4262.797] Module class: X.Org XInput Driver
[ 4262.797] ABI class: X.Org XInput driver, version 13.0
[ 4262.797] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[ 4262.797] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 4262.797] Option "_source" "server/udev"
[ 4262.797] Option "name" "SynPS/2 Synaptics TouchPad"
[ 4262.797] Option "path" "/dev/input/event14"
[ 4262.797] Option "device" "/dev/input/event14"
[ 4262.797] Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input14/event14"
[ 4262.797] Option "driver" "synaptics"
[ 4262.797] Option "TapButton1" "1"
[ 4262.797] Option "TapButton2" "2"
[ 4262.797] Option "TapButton3" "3"
[ 4262.797] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 4262.797] (**) Option "Device" "/dev/input/event14"
[ 4262.922] (**) Option "Device" "/dev/input/event14"
[ 4262.923] port opened successfully
[ 4262.972] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5888
[ 4262.973] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4844
[ 4262.973] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 4262.973] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 0
[ 4262.973] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
[ 4262.973] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[ 4262.973] (**) Option "TapButton1" "1"
[ 4262.973] (**) Option "TapButton2" "2"
[ 4262.973] (**) Option "TapButton3" "3"
[ 4263.079] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 4263.079] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 4263.186] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input14/event14"
[ 4263.186] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 15)
[ 4263.186] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 4263.186] (**) synaptics: SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75
[ 4263.186] (**) synaptics: SynPS/2 Synaptics TouchPad: AccelFactor is now 0.036
[ 4263.186] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 4263.186] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[ 4263.186] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 4263.186] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 4263.186] (**) Option "Device" "/dev/input/event14"
[ 4263.186] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 4263.187] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse1)
[ 4263.187] (II) No input driver specified, ignoring this device.
[ 4263.187] (II) This device may have been added with another device file.
[ 4263.187] (II) config/udev: Adding input device PC Speaker (/dev/input/event5)
[ 4263.187] (II) No input driver specified, ignoring this device.
[ 4263.187] (II) This device may have been added with another device file.
[ 4263.187] (II) config/udev: Adding input device HP WMI hotkeys (/dev/input/event9)
[ 4263.187] (**) HP WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[ 4263.188] (II) Using input driver 'evdev' for 'HP WMI hotkeys'
[ 4263.188] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 4263.188] Option "XkbRules" "evdev"
[ 4263.188] Option "XkbModel" "evdev"
[ 4263.188] Option "XkbLayout" "us"
[ 4263.188] Option "_source" "server/udev"
[ 4263.188] Option "name" "HP WMI hotkeys"
[ 4263.188] Option "path" "/dev/input/event9"
[ 4263.188] Option "device" "/dev/input/event9"
[ 4263.188] Option "config_info" "udev:/sys/devices/virtual/input/input9/event9"
[ 4263.188] Option "driver" "evdev"
[ 4263.188] (**) HP WMI hotkeys: always reports core events
[ 4263.188] (**) HP WMI hotkeys: Device: "/dev/input/event9"
[ 4263.188] (--) HP WMI hotkeys: Found keys
[ 4263.188] (II) HP WMI hotkeys: Configuring as keyboard
[ 4263.188] (**) Option "config_info" "udev:/sys/devices/virtual/input/input9/event9"
[ 4263.188] (II) XINPUT: Adding extended input device "HP WMI hotkeys" (type: KEYBOARD, id 16)
[ 4263.188] (**) Option "xkb_rules" "evdev"
[ 4263.188] (**) Option "xkb_model" "evdev"
[ 4263.188] (**) Option "xkb_layout" "us"
[ 4263.188] (II) XKB: Reusing cached keymap
[ 4263.194] (II) intel(0): EDID vendor "LGD", prod id 684
[ 4263.194] (II) intel(0): Printing DDC gathered Modelines:
[ 4263.194] (II) intel(0): Modeline "1366x768"x0.0 69.30 1366 1398 1430 1486 768 770 774 782 -hsync -vsync (46.6 kHz)
[ 4263.592] (II) intel(0): EDID vendor "LGD", prod id 684
[ 4263.592] (II) intel(0): Printing DDC gathered Modelines:
[ 4263.592] (II) intel(0): Modeline "1366x768"x0.0 69.30 1366 1398 1430 1486 768 770 774 782 -hsync -vsync (46.6 kHz)
[ 4263.716] (II) intel(0): EDID vendor "LGD", prod id 684
[ 4263.716] (II) intel(0): Printing DDC gathered Modelines:
[ 4263.716] (II) intel(0): Modeline "1366x768"x0.0 69.30 1366 1398 1430 1486 768 770 774 782 -hsync -vsync (46.6 kHz)
[ 4263.844] (II) intel(0): EDID vendor "LGD", prod id 684
[ 4263.844] (II) intel(0): Printing DDC gathered Modelines:
[ 4263.844] (II) intel(0): Modeline "1366x768"x0.0 69.30 1366 1398 1430 1486 768 770 774 782 -hsync -vsync (46.6 kHz)
[ 4263.964] (II) intel(0): EDID vendor "LGD", prod id 684
[ 4263.964] (II) intel(0): Printing DDC gathered Modelines:
[ 4263.964] (II) intel(0): Modeline "1366x768"x0.0 69.30 1366 1398 1430 1486 768 770 774 782 -hsync -vsync (46.6 kHz)
[ 4264.084] (II) intel(0): EDID vendor "LGD", prod id 684
[ 4264.084] (II) intel(0): Printing DDC gathered Modelines:
[ 4264.084] (II) intel(0): Modeline "1366x768"x0.0 69.30 1366 1398 1430 1486 768 770 774 782 -hsync -vsync (46.6 kHz)
[ 4274.489] (II) Power Button: Close
[ 4274.489] (II) UnloadModule: "evdev"
[ 4274.489] (II) Unloading evdev
[ 4274.509] (II) Video Bus: Close
[ 4274.509] (II) UnloadModule: "evdev"
[ 4274.509] (II) Unloading evdev
[ 4274.533] (II) Power Button: Close
[ 4274.533] (II) UnloadModule: "evdev"
[ 4274.533] (II) Unloading evdev
[ 4274.596] (II) Microsoft Microsoft® Nano Transceiver v2.0: Close
[ 4274.596] (II) UnloadModule: "evdev"
[ 4274.596] (II) Unloading evdev
[ 4274.659] (II) Microsoft Microsoft® Nano Transceiver v2.0: Close
[ 4274.659] (II) UnloadModule: "evdev"
[ 4274.659] (II) Unloading evdev
[ 4274.679] (II) Microsoft Microsoft® Nano Transceiver v2.0: Close
[ 4274.679] (II) UnloadModule: "evdev"
[ 4274.679] (II) Unloading evdev
[ 4274.703] (II) Logitech Unifying Device. Wireless PID:4004: Close
[ 4274.703] (II) UnloadModule: "evdev"
[ 4274.703] (II) Unloading evdev
[ 4274.726] (II) HP Webcam-101: Close
[ 4274.726] (II) UnloadModule: "evdev"
[ 4274.726] (II) Unloading evdev
[ 4274.749] (II) AT Translated Set 2 keyboard: Close
[ 4274.749] (II) UnloadModule: "evdev"
[ 4274.749] (II) Unloading evdev
[ 4274.793] (II) UnloadModule: "synaptics"
[ 4274.793] (II) Unloading synaptics
[ 4274.816] (II) HP WMI hotkeys: Close
[ 4274.816] (II) UnloadModule: "evdev"
[ 4274.816] (II) Unloading evdev
[ 4274.885] Server terminated successfully (0). Closing log file.Last edited by rabbidrabbit (2012-03-02 17:10:23)
Offline
#4 2012-03-02 17:17:19
- hadrons123
- Member
- From: chennai
- Registered: 2011-10-07
- Posts: 1,249
Re: [SOLVED] Synaptics module not loading
what is your udev version ?
pacman -Qi udevLENOVO Y 580 IVYBRIDGE 660M NVIDIA
Unix is user-friendly. It just isn't promiscuous about which users it's friendly with. - Steven King
Offline
#5 2012-03-02 17:25:20
- rabbidrabbit
- Member
- Registered: 2012-01-30
- Posts: 11
Re: [SOLVED] Synaptics module not loading
I'm running udev 181-2
Offline
#6 2012-03-02 17:39:11
- hadrons123
- Member
- From: chennai
- Registered: 2011-10-07
- Posts: 1,249
Re: [SOLVED] Synaptics module not loading
I think its most likely to do with udev, even though there hasn't been anything on it documented.You can try downgrading the udev to the version where it worked.
LENOVO Y 580 IVYBRIDGE 660M NVIDIA
Unix is user-friendly. It just isn't promiscuous about which users it's friendly with. - Steven King
Offline
#7 2012-03-02 18:10:53
- rabbidrabbit
- Member
- Registered: 2012-01-30
- Posts: 11
Re: [SOLVED] Synaptics module not loading
hi,
after downgrading udev I can no longer boot. Have I missed a step? What should I do to fix udev.
EDIT:
I solved the boot issue by chrooting via a live cd first trying to create a new initramfs with mkinitcpio which failed, and then by upgrading udev again, and trying mkinitcpio which worked.
Last edited by rabbidrabbit (2012-03-02 18:39:45)
Offline
#8 2012-03-02 23:14:23
- hadrons123
- Member
- From: chennai
- Registered: 2011-10-07
- Posts: 1,249
Re: [SOLVED] Synaptics module not loading
Sorry for the trouble. i should have mentiioned when you downgrade udev should sometimes have to downgrade kernel too.
LENOVO Y 580 IVYBRIDGE 660M NVIDIA
Unix is user-friendly. It just isn't promiscuous about which users it's friendly with. - Steven King
Offline
#9 2012-03-02 23:36:00
- Gusar
- Member
- Registered: 2009-08-25
- Posts: 3,605
Re: [SOLVED] Synaptics module not loading
hadrons123 wrote:
Sorry for the trouble. i should have mentiioned when you downgrade udev should sometimes have to downgrade kernel too.
Not that I'm aware of. Recreating the initramfs (mkinitcpio -p linux) yes, but kernel version doesn't matter, as long as it's new enough (at least 2.6.32).
Offline
#10 2012-03-03 09:35:25
- rabbidrabbit
- Member
- Registered: 2012-01-30
- Posts: 11
Re: [SOLVED] Synaptics module not loading
The problem is that when I downgrade udev and run mkinicpio I get the error
==> ERROR: Hook 'udev' can not be found.I think udev and a few other packages were moved to different places on the system recently.
Could that be why udev cannot be found when I downgrade it?
Last edited by rabbidrabbit (2012-03-03 09:40:13)
Offline
#11 2012-03-03 10:45:35
- Gusar
- Member
- Registered: 2009-08-25
- Posts: 3,605
Re: [SOLVED] Synaptics module not loading
Oh, yeah, the udev hook moved from the mkinitcpio package to the udev package. So if you downgrade udev, you're without the hook. You have to downgrade mkinitcpio too.
Then there's the other thing that there's no guarantee udev is actually the problem here.
Offline
#12 2012-03-03 18:22:49
- rabbidrabbit
- Member
- Registered: 2012-01-30
- Posts: 11
Re: [SOLVED] Synaptics module not loading
I managed to fix the issue by downgrading the linux kernel from 3.2.8-1 to 3.2.7-1.
I'm not sure if I should file a bug report since downgrading the kernel did fix the issue.
Last edited by rabbidrabbit (2012-03-03 18:23:03)
Offline
#13 2012-03-05 13:42:41
- lfsevernini
- Member
- Registered: 2012-03-05
- Posts: 2
Re: [SOLVED] Synaptics module not loading
I'm sorry, this is an already solved post, but I want to share my experience.
I did an update and got kernel 3.2.8-1, and after that the touchpad on my Dell XPS 15 (L502X) was not working anymore.
I searched and tried many suggestions around the web unsucessfully.
I managed to get touchpad working again after remove synaptics-led package. It's working on kernel 3.2.8-1 and udev 181-2.
Offline
#14 2012-03-05 21:42:10
- rabbidrabbit
- Member
- Registered: 2012-01-30
- Posts: 11
Re: [SOLVED] Synaptics module not loading
Thanks a lot. I forgot that installed synaptics-led. Removing that allowed me to update to linux 3.2.8-1.
Offline
Pages: 1