You are not logged in.

#1 2012-03-21 07:54:16

Compulsed
Member
Registered: 2011-08-24
Posts: 44

[Solved] Xorg fails when using Vmware.

I've recently ran into a problem with ArchLinux running as a guest in VMware,
I'd try load xorg and it would crash so I thought I'd install another version of ArchLinux in another machine.
All went well until I installed

xf86-video-vmware & svga-dri & open-vm-tools and added # MODULES = (... vmwgfx ...)

So I'm finding it hard to figure out if this is a common issue (I've googled around and couldn't find anything), or something to do with one of the packages I've installed.
Suggestions as to what I can do to fix this problem would be appreciated,
Thanks and have a nice day.
~Compulsed

[   132.495] 
X.Org X Server 1.12.0
Release Date: 2012-03-04
[   132.495] X Protocol Version 11, Revision 0
[   132.495] Build Operating System: Linux 3.2.9-1-ARCH x86_64 
[   132.495] Current Operating System: Linux NiggerVM 3.2.11-1-ARCH #1 SMP PREEMPT Thu Mar 15 09:19:02 CET 2012 x86_64
[   132.496] Kernel command line: root=/dev/disk/by-uuid/a9ad4c3b-f6b5-4cb3-9355-17eba48a92d7 ro
[   132.496] Build Date: 05 March 2012  05:59:48AM
[   132.496]  
[   132.496] Current version of pixman: 0.24.4
[   132.497] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[   132.497] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[   132.498] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Mar 21 18:40:19 2012
[   132.539] (==) Using config directory: "/etc/X11/xorg.conf.d"
[   132.565] (==) No Layout section.  Using the first Screen section.
[   132.565] (==) No screen section available. Using defaults.
[   132.565] (**) |-->Screen "Default Screen Section" (0)
[   132.565] (**) |   |-->Monitor "<default monitor>"
[   132.565] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[   132.565] (==) Automatically adding devices
[   132.565] (==) Automatically enabling devices
[   132.584] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[   132.584] 	Entry deleted from font path.
[   132.584] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[   132.584] 	Entry deleted from font path.
[   132.585] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[   132.585] 	Entry deleted from font path.
[   132.585] 	(Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[   132.590] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[   132.590] 	Entry deleted from font path.
[   132.590] 	(Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[   132.590] (==) FontPath set to:
	/usr/share/fonts/misc/,
	/usr/share/fonts/TTF/
[   132.590] (==) ModulePath set to "/usr/lib/xorg/modules"
[   132.590] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[   132.591] (II) Loader magic: 0x7cef60
[   132.591] (II) Module ABI versions:
[   132.591] 	X.Org ANSI C Emulation: 0.4
[   132.591] 	X.Org Video Driver: 12.0
[   132.591] 	X.Org XInput driver : 16.0
[   132.591] 	X.Org Server Extension : 6.0
[   132.598] (--) PCI:*(0:0:15:0) 15ad:0405:15ad:0405 rev 0, Mem @ 0xd0000000/134217728, 0xd8000000/8388608, I/O @ 0x000010d0/16, BIOS @ 0x????????/32768
[   132.599] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[   132.599] (II) LoadModule: "extmod"
[   132.606] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[   132.619] (II) Module extmod: vendor="X.Org Foundation"
[   132.619] 	compiled for 1.12.0, module version = 1.0.0
[   132.619] 	Module class: X.Org Server Extension
[   132.619] 	ABI class: X.Org Server Extension, version 6.0
[   132.619] (II) Loading extension MIT-SCREEN-SAVER
[   132.619] (II) Loading extension XFree86-VidModeExtension
[   132.619] (II) Loading extension XFree86-DGA
[   132.619] (II) Loading extension DPMS
[   132.619] (II) Loading extension XVideo
[   132.619] (II) Loading extension XVideo-MotionCompensation
[   132.619] (II) Loading extension X-Resource
[   132.619] (II) LoadModule: "dbe"
[   132.619] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[   132.620] (II) Module dbe: vendor="X.Org Foundation"
[   132.620] 	compiled for 1.12.0, module version = 1.0.0
[   132.620] 	Module class: X.Org Server Extension
[   132.620] 	ABI class: X.Org Server Extension, version 6.0
[   132.620] (II) Loading extension DOUBLE-BUFFER
[   132.620] (II) LoadModule: "glx"
[   132.620] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[   132.639] (II) Module glx: vendor="X.Org Foundation"
[   132.639] 	compiled for 1.12.0, module version = 1.0.0
[   132.640] 	ABI class: X.Org Server Extension, version 6.0
[   132.640] (==) AIGLX enabled
[   132.640] (II) Loading extension GLX
[   132.640] (II) LoadModule: "record"
[   132.640] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[   132.640] (II) Module record: vendor="X.Org Foundation"
[   132.640] 	compiled for 1.12.0, module version = 1.13.0
[   132.640] 	Module class: X.Org Server Extension
[   132.640] 	ABI class: X.Org Server Extension, version 6.0
[   132.641] (II) Loading extension RECORD
[   132.641] (II) LoadModule: "dri"
[   132.641] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[   132.659] (II) Module dri: vendor="X.Org Foundation"
[   132.659] 	compiled for 1.12.0, module version = 1.0.0
[   132.659] 	ABI class: X.Org Server Extension, version 6.0
[   132.659] (II) Loading extension XFree86-DRI
[   132.659] (II) LoadModule: "dri2"
[   132.659] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[   132.659] (II) Module dri2: vendor="X.Org Foundation"
[   132.659] 	compiled for 1.12.0, module version = 1.2.0
[   132.659] 	ABI class: X.Org Server Extension, version 6.0
[   132.659] (II) Loading extension DRI2
[   132.659] (==) Matched vmware as autoconfigured driver 0
[   132.659] (==) Matched vesa as autoconfigured driver 1
[   132.659] (==) Matched fbdev as autoconfigured driver 2
[   132.659] (==) Assigned the driver to the xf86ConfigLayout
[   132.659] (II) LoadModule: "vmware"
[   132.659] (II) Loading /usr/lib/xorg/modules/drivers/vmware_drv.so
[   132.928] (II) Module vmware: vendor="X.Org Foundation"
[   132.928] 	compiled for 1.12.0, module version = 12.0.1
[   132.928] 	Module class: X.Org Video Driver
[   132.928] 	ABI class: X.Org Video Driver, version 12.0
[   132.928] (II) LoadModule: "vesa"
[   132.928] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[   132.941] (II) Module vesa: vendor="X.Org Foundation"
[   132.941] 	compiled for 1.11.99.903, module version = 2.3.0
[   132.941] 	Module class: X.Org Video Driver
[   132.941] 	ABI class: X.Org Video Driver, version 12.0
[   132.941] (II) LoadModule: "fbdev"
[   132.962] (WW) Warning, couldn't open module fbdev
[   132.962] (II) UnloadModule: "fbdev"
[   132.962] (II) Unloading fbdev
[   132.962] (EE) Failed to load module "fbdev" (module does not exist, 0)
[   132.962] (II) vmware: driver for VMware SVGA: vmware0405, vmware0710
[   132.962] (II) VESA: driver for VESA chipsets: vesa
[   132.962] (--) using VT number 7

[   133.004] (WW) Falling back to old probe method for vesa
[   133.004] drmOpenDevice: node name is /dev/dri/card0
[   133.020] drmOpenDevice: open result is 8, (OK)
[   133.040] drmOpenByBusid: Searching for BusID PCI:0:15:0
[   133.040] drmOpenDevice: node name is /dev/dri/card0
[   133.051] drmOpenDevice: open result is 8, (OK)
[   133.051] drmOpenByBusid: drmOpenMinor returns 8
[   133.051] drmOpenByBusid: drmGetBusid reports pci:0000:00:0f.0
[   133.051] (--) vmware(0): DRM driver version is 2.3.0
[   133.051] (II) vmware(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[   133.051] (EE) vmware(0): Device is not screen object capable.
[   133.073] (WW) vmware(0): Disabling 3D support.
[   133.073] (WW) vmware(0): Disabling Render Acceleration.
[   133.073] (WW) vmware(0): Disabling RandR12+ support.
[   133.073] (--) vmware(0): VMware SVGA regs at (0x10d0, 0x10d1)
[   133.073] (II) Loading sub module "vgahw"
[   133.073] (II) LoadModule: "vgahw"
[   133.074] (II) Loading /usr/lib/xorg/modules/libvgahw.so
[   133.084] (II) Module vgahw: vendor="X.Org Foundation"
[   133.084] 	compiled for 1.12.0, module version = 0.1.0
[   133.084] 	ABI class: X.Org Video Driver, version 12.0
[   133.084] 
[   133.084] Backtrace:
[   133.084] 0: /usr/bin/X (xorg_backtrace+0x34) [0x567da4]
[   133.084] 1: /usr/bin/X (0x400000+0x16b8b9) [0x56b8b9]
[   133.084] 2: /lib/libpthread.so.0 (0x7f1a580d3000+0xf270) [0x7f1a580e2270]
[   133.084] 
[   133.084] Segmentation fault at address (nil)
[   133.084] 
Fatal server error:
[   133.084] Caught signal 11 (Segmentation fault). Server aborting
[   133.084] 
[   133.084] 
Please consult the The X.Org Foundation support 
	 at http://wiki.x.org
 for help. 
[   133.084] Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[   133.084] 
[   133.099] Server terminated with error (1). Closing log file.

Last edited by Compulsed (2012-03-22 08:18:12)

Offline

#2 2012-03-21 17:12:29

Jessehk
Member
From: Toronto, Ontario, Canada
Registered: 2007-01-16
Posts: 152

Re: [Solved] Xorg fails when using Vmware.

Offline

#3 2012-03-22 08:17:56

Compulsed
Member
Registered: 2011-08-24
Posts: 44

Re: [Solved] Xorg fails when using Vmware.

Seems the update today resolved the problems,
Thanks for the help!

Offline

Board footer

Powered by FluxBB