You are not logged in.
Hi,
I bought a cheap "PC Remote" which came with it's own USB IR receiver and it works fine without LIRC. I believe it just emulates keys/multimedia keys that you would find on a keyboard.
With LIRC and this USB IR receiver I have, is it possible to use ANY IR remote? Even one designed for a TV? I've followed through the LIRC wiki page and I couldn't get it to detect any button presses from either remote.
I have a laptop with a built-in IR receiver; do they work with remotes? It doesn't seem to out of the box, or is it purely for sending files? (That's all I've ever done with it in the past... a long, long time ago).
Thanks
PGP key: F40D2072
Key fingerprint: 8742 F753 5E7B 394A 1B04 8163 332C 9C40 F40D 2072
Offline
If it emulates multimedia keys I don't think you can use it with LIRC. In that case it most probably tricks the computer into thinking it's a keyboard.
What's the output of dmesg right after you plug it in? That might give you some clues.
Generally with IR receiver you can get input from any remote. If you are comfortable with electronics, you could hook up one of these into your soundcard's microphone jack and make LIRC use it as a receiver. You can salvage those receivers from old DVD players or video recorders. Or maybe inside your USB receiver (if you don't mind breaking it).
Offline
The receiver needs to be able to decode the remote's IR signal (protocol), and map it to key events.
So a MCE compatible RC6 receiver will only work with MCE compatible remotes.
Check your dmesg output to see what gets loaded and configured. Newer kernels autoconfigure some IR receivers as input devices (like a keyboard), so LIRC needs to be configured to use devinput driver and the correct event device.
Last edited by teekay (2012-04-13 11:34:29)
Offline