You are not logged in.

#1 2012-04-25 08:54:01

llawwehttam
Member
From: United Kingdom
Registered: 2010-01-19
Posts: 181

Xmonad with twinview + seperate x screen

I have 3 monitors, 2 LG IPS 23" and 1 older Viewsonic 22".

I use xmonad and with the two LG monitors in twinview, Xmonad treats them separately and correctly assigns a workspace to each monitor which is exactly what I want.

However, If I add in the third screen as a separate X screen then Xmonad treats the two 23" LG monitors as one big display and stretches everything over them and doesn't run anything on the separate X screen (I guess I'll have to run a separate Xmonad session on it.)

Any ideas as I really want to be able to utilise 3 monitors?

As I use 2 nvidia GPU's xrandr is NOT an option and I don't want to use xinerama due to lag issues (I know this won't allow me to move windows between the separate X screens, that is an acceptable sacrifice.)

Here are my configs:

> cat .xmonad/xmonad.hs                                                                                                                                                                                                                                                                                ~
--------------------------------
--------- Import Stuff ---------
--------------------------------
import XMonad
import qualified XMonad.StackSet as W
import qualified Data.Map as M
import System.IO
import Data.Ratio ((%))


-- Utilities
import XMonad.Util.Run (spawnPipe)
import XMonad.Util.EZConfig
import XMonad.Util.CustomKeys
  
-- Hooks
import XMonad.Hooks.ManageDocks
import XMonad.Hooks.DynamicLog
import XMonad.Hooks.ManageHelpers
import XMonad.Hooks.UrgencyHook

-- Layout
import XMonad.Layout.IM
import XMonad.Layout.Reflect
import XMonad.Layout.NoBorders
import XMonad.Layout.ResizableTile
import XMonad.Layout.PerWorkspace
import XMonad.Layout.ThreeColumns
import XMonad.Layout.Spacing

--------------------------------
-------- Custom Config ---------
--------------------------------

statusBarCmd= "/usr/bin/xmobar /home/llawwehttam/.xmobarrc"

-- Workspaces
myWorkspaces  = ["1 sys","2 comms","3 web","4 misc","5 vm's","6 docs","7 video","8 ssh","9 minimise"]

myLayout = spacing 1 $ ( tiled ||| Mirror tiled ||| ThreeCol 1 (3/100) (1/3) ||| ThreeColMid 1 (3/100) (7/11) ||| Full ) 
    where  
      -- default tiling algorithm partitions the screen into two panes  
      tiled = Tall nmaster delta ratio  
      -- The default number of windows in the master pane  
      nmaster = 1  
      -- Default proportion of screen occupied by master pane  
      ratio = 1/2
      -- Percent of screen to increment by when resizing panes  
      delta = 3/100

myManage = composeAll       
      [ className =? "File Operation Progress"   --> doFloat  
      , resource =? "desktop_window" --> doIgnore  
      , className =? "xfce4-notifyd" --> doIgnore  
      , className =? "Shotwell" --> doShift "5:graphic"  
      , className =? "Gimp" --> doShift "5:graphic"  
      , className =? "Totem" --> doShift "7:media"  
      , isFullscreen --> doFullFloat
      ]  

myLogHook dest = dynamicLogWithPP defaultPP { ppOutput = hPutStrLn dest
                                            ,ppVisible = wrap "(" ")"
					    }    

myKeys =
    [ ((mod4Mask, xK_m), spawn "dmenu_run")
    ]

 --newKeys x = M.union (keys defaultConfig x) (M.fromList (myKeys x))

--------------------------------
-------- Main Function ---------
--------------------------------

main = do
   xmproc <- spawnPipe statusBarCmd
   spawn "xcompmgr -cCf -r 0 -D 2 &"  
   xmonad $ defaultConfig
      {
      terminal = "urxvt"
      , manageHook = manageDocks <+> myManage <+> manageHook defaultConfig
      , focusFollowsMouse = False
      , layoutHook = avoidStruts $ layoutHook defaultConfig { layoutHook = myLayout }
      , logHook = myLogHook xmproc
      , modMask = mod4Mask
      , workspaces = myWorkspaces
      , borderWidth = 1
      , normalBorderColor = "#555555"  
      , focusedBorderColor = "#ffffff"
      }
       `additionalKeys` myKeys

Xorg.conf (Just the 2 23" LG panels working fine):

> cat xorg.conf                                                                                                                 /etc/X11
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings:  version 295.40  (buildmeister@swio-display-x86-rhel47-06.nvidia.com)  Thu Apr  5 22:40:34 PDT 2012

Section "ServerLayout"
    Identifier     "Layout0"
    Screen      0  "Screen0" 0 0
    InputDevice    "Keyboard0" "CoreKeyboard"
    InputDevice    "Mouse0" "CorePointer"
    Option         "Xinerama" "0"
EndSection

Section "Files"
EndSection

Section "InputDevice"
    # generated from default
    Identifier     "Mouse0"
    Driver         "mouse"
    Option         "Protocol" "auto"
    Option         "Device" "/dev/psaux"
    Option         "Emulate3Buttons" "no"
    Option         "ZAxisMapping" "4 5"
EndSection

Section "InputDevice"
    # generated from default
    Identifier     "Keyboard0"
    Driver         "kbd"
EndSection

Section "Monitor"
    # HorizSync source: edid, VertRefresh source: edid
    Identifier     "Monitor0"
    VendorName     "Unknown"
    ModelName      "LG Electronics IPS235"
    HorizSync       30.0 - 83.0
    VertRefresh     56.0 - 75.0
    Option         "DPMS"
EndSection

Section "Device"
    Identifier     "Device0"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "GeForce 8800 GT"
    BusID          "PCI:1:0:0"
EndSection

Section "Screen"
    Identifier     "Screen0"
    Device         "Device0"
    Monitor        "Monitor0"
    DefaultDepth    24
    Option         "TwinView" "1"
    Option         "TwinViewXineramaInfoOrder" "DFP-0"
    Option         "metamodes" "DFP-0: nvidia-auto-select +0+0, DFP-1: nvidia-auto-select +1920+0"
    SubSection     "Display"
        Depth       24
    EndSubSection
EndSection

My attempt at getting all 3 monitors working (causes problem described above):

> cat xorg.conf                                                                                                                 /etc/X11
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings:  version 295.40  (buildmeister@swio-display-x86-rhel47-06.nvidia.com)  Thu Apr  5 22:40:34 PDT 2012

Section "ServerLayout"
    Identifier     "Layout0"
    Screen      0  "Screen0" 1920 0
    Screen      1  "Screen1" LeftOf "Screen0"
    InputDevice    "Keyboard0" "CoreKeyboard"
    InputDevice    "Mouse0" "CorePointer"
    Option         "Xinerama" "0"
EndSection

Section "Files"
EndSection

Section "InputDevice"
    # generated from default
    Identifier     "Mouse0"
    Driver         "mouse"
    Option         "Protocol" "auto"
    Option         "Device" "/dev/psaux"
    Option         "Emulate3Buttons" "no"
    Option         "ZAxisMapping" "4 5"
EndSection

Section "InputDevice"
    # generated from default
    Identifier     "Keyboard0"
    Driver         "kbd"
EndSection

Section "Monitor"
    # HorizSync source: edid, VertRefresh source: edid
    Identifier     "Monitor0"
    VendorName     "Unknown"
    ModelName      "LG Electronics IPS235"
    HorizSync       30.0 - 83.0
    VertRefresh     56.0 - 75.0
    Option         "DPMS"
EndSection

Section "Monitor"
    # HorizSync source: edid, VertRefresh source: edid
    Identifier     "Monitor1"
    VendorName     "Unknown"
    ModelName      "ViewSonic VX2260WM"
    HorizSync       24.0 - 82.0
    VertRefresh     50.0 - 75.0
    Option         "DPMS"
EndSection

Section "Device"
    Identifier     "Device0"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "GeForce 8800 GT"
    BusID          "PCI:1:0:0"
EndSection

Section "Device"
    Identifier     "Device1"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "GeForce GT 220"
    BusID          "PCI:2:0:0"
EndSection

Section "Screen"
    Identifier     "Screen0"
    Device         "Device0"
    Monitor        "Monitor0"
    DefaultDepth    24
    Option         "TwinView" "1"
    Option         "TwinViewXineramaInfoOrder" "DFP-0"
    Option         "metamodes" "DFP-0: nvidia-auto-select +0+0, DFP-1: nvidia-auto-select +1920+0"
    SubSection     "Display"
        Depth       24
    EndSubSection
EndSection

Section "Screen"
    Identifier     "Screen1"
    Device         "Device1"
    Monitor        "Monitor1"
    DefaultDepth    24
    Option         "TwinView" "0"
    Option         "metamodes" "nvidia-auto-select +0+0"
    SubSection     "Display"
        Depth       24
    EndSubSection
EndSection

Yes Xmonad is compiled with Xinerama support and this is proved as it works fine with the 2 monitors.

Offline

#2 2012-04-25 09:14:53

sunaj
Member
Registered: 2010-06-08
Posts: 9

Re: Xmonad with twinview + seperate x screen

You could try setting the Meta-Modes for your Screens [Screen-0] manually:

Option "metamodes" "DFP-0: 1920x1080 +0+0, DFP-1: 1920x1080 +1920+0; DFP-0:1920x1080 +0+0" 

Offline

#3 2012-04-25 09:35:08

llawwehttam
Member
From: United Kingdom
Registered: 2010-01-19
Posts: 181

Re: Xmonad with twinview + seperate x screen

sunaj wrote:

You could try setting the Meta-Modes for your Screens [Screen-0] manually:

Option "metamodes" "DFP-0: 1920x1080 +0+0, DFP-1: 1920x1080 +1920+0; DFP-0:1920x1080 +0+0" 

Nope, no difference at all. Thanks anyway.

EDIT: Just tried with xinerama connecting the separate x screen and the two in twin-view and I get the same problem behaviour, ie stretching across the twin-view which only happens when the additional screen is connected.

EDIT2: I can see myself having to wait until Xrandr supports multiple GPU's.

EDIT: Until I can get this fixed I'm running my extra screen from my laptop and using synergy to move control between machines.

It's not idea but it will do until I have time to work out how to fix this.

Last edited by llawwehttam (2012-04-25 10:00:03)

Offline

Board footer

Powered by FluxBB