You are not logged in.

Pages: 1

#1 2012-04-28 06:08:26

jblackwood
Member
Registered: 2010-02-01
Posts: 1

New kernel won't boot, fails to assemble RAID then stalls

I updated a remote server (sadly without paying as much attention as I should it seems) and it seems that there was a change which has broken my RAID setup. The machine boots up until it assembles the boot RAID1 and LVM RAID1 and then it stops.

I'm unable to get physical access for a while and I need this server to be running again ASAP so hopefully someone can help.

Here's the kernel boot log (ignore timing, all done over serial console)

  Booting command-list                                                          [    0.000000] Initializing cgroup subsys cpuset2K upper memory)                
[    0.000000] Initializing cgroup subsys cpu                                   
[    0.000000] Linux version 3.3.3-1-ARCH (tobias@T-POWA-LX) (gcc version 4.7.0 20120414 (prerelease) (GCC) ) #1 SMP PREEMPT Mon Apr 23 09:41:07 CEST 2012 *    
[    0.000000] Command line: root=/dev/mapper/togrog--1-root ro console=ttyS0,9600 console=tty0 ignore_loglevelback.img                                    *    
[    0.000000] BIOS-provided physical RAM map:                             *    
[    0.000000]  BIOS-e820: 0000000000000000 - 0000000000099000 (usable)    *    
[    0.000000]  BIOS-e820: 0000000000099000 - 00000000000a0000 (reserved)       
[    0.000000]  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)       
[    0.000000]  BIOS-e820: 0000000000100000 - 00000000bf760000 (usable)         
[    0.000000]  BIOS-e820: 00000000bf76e000 - 00000000bf770000 type 9           
[    0.000000]  BIOS-e820: 00000000bf770000 - 00000000bf77e000 (ACPI data)      
[    0.000000]  BIOS-e820: 00000000bf77e000 - 00000000bf7d0000 (ACPI NVS)       
[    0.000000]  BIOS-e820: 00000000bf7d0000 - 00000000bf7e0000 (reserved)       
[    0.000000]  BIOS-e820: 00000000bf7ed000 - 00000000c0000000 (reserved)       
[    0.000000]  BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)       
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)       
[    0.000000]  BIOS-e820: 00000000ffa00000 - 0000000100000000 (reserved)       
[    0.000000]  BIOS-e820: 0000000100000000 - 0000000440000000 (usable)         
[    0.000000] debug: ignoring loglevel setting.                                
[    0.000000] NX (Execute Disable) protection: active                          
[    0.000000] DMI present.                                                     
[    0.000000] DMI: HP ProLiant DL160 G6  , BIOS O33 02/17/2011
[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[    0.000000] No AGP bridge found
[    0.000000] last_pfn = 0x440000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-C7FFF write-protect
[    0.000000]   C8000-DFFFF uncachable
[    0.000000]   E0000-E3FFF write-protect
[    0.000000]   E4000-E7FFF write-through
[    0.000000]   E8000-EBFFF write-protect
[    0.000000]   EC000-EFFFF write-through
[    0.000000]   F0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0000000000 mask FC00000000 write-back
[    0.000000]   1 base 0400000000 mask FFC0000000 write-back
[    0.000000]   2 base 00C0000000 mask FFC0000000 uncachable
[    0.000000]   3 base 00BF800000 mask FFFF800000 uncachable
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] e820 update range: 00000000bf800000 - 0000000100000000 (usable) ==> (reserved)
[    0.000000] last_pfn = 0xbf760 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [ffff8800000ff780] ff780
[    0.000000] initial memory mapped : 0 - 20000000
[    0.000000] Base memory trampoline at [ffff880000094000] 94000 size 20480
[    0.000000] init_memory_mapping: 0000000000000000-00000000bf760000
[    0.000000]  0000000000 - 00bf600000 page 2M
[    0.000000]  00bf600000 - 00bf760000 page 4k
[    0.000000] kernel direct mapping tables up to bf760000 @ 1fffb000-20000000
[    0.000000] init_memory_mapping: 0000000100000000-0000000440000000
[    0.000000]  0100000000 - 0440000000 page 2M
[    0.000000] kernel direct mapping tables up to 440000000 @ bf74e000-bf760000
[    0.000000] RAMDISK: 37784000 - 37ff0000
[    0.000000] ACPI: RSDP 00000000000fa160 00024 (v02 HP    )
[    0.000000] ACPI: XSDT 00000000bf770100 0009C (v01 HP     ProLiant 20110217 MSFT 00000097)
[    0.000000] ACPI: FACP 00000000bf770290 000F4 (v04 HP     ProLiant 20110217 MSFT 00000097)
[    0.000000] ACPI: DSDT 00000000bf770740 05EEB (v02 HP     ProLiant 00000233 INTL 20051117)
[    0.000000] ACPI: FACS 00000000bf77e000 00040
[    0.000000] ACPI: APIC 00000000bf770390 0011E (v02 HP     ProLiant 20110217 MSFT 00000097)
[    0.000000] ACPI: SPCR 00000000bf7704b0 00050 (v01 HP     ProLiant 20110217 MSFT 00000097)
[    0.000000] ACPI: MCFG 00000000bf770500 0003C (v01 HP     ProLiant 20110217 MSFT 00000097)
[    0.000000] ACPI: SPMI 00000000bf770540 00041 (v05 HP     ProLiant 20110217 MSFT 00000097)
[    0.000000] ACPI: SLIC 00000000bf770590 00176 (v01 HP     SLIC0832 20110217 MSFT 00000097)
[    0.000000] ACPI: BOOT 00000000bf770710 00028 (v01 HP     ProLiant 20110217 MSFT 00000097)
[    0.000000] ACPI: OEMB 00000000bf77e040 0007A (v01 HP     ProLiant 20110217 MSFT 00000097)
[    0.000000] ACPI: HPET 00000000bf77a740 00038 (v01 HP     ProLiant 20110217 MSFT 00000097)
[    0.000000] ACPI: DMAR 00000000bf77e0c0 00110 (v01    AMI  OEMDMAR 00000001 MSFT 00000097)
[    0.000000] ACPI: SSDT 00000000bf77eea0 00363 (v01 HP     ProLiant 00000012 INTL 20051117)
[    0.000000] ACPI: EINJ 00000000bf77a780 00130 (v01     HP ProLiant 20110217 MSFT 00000097)
[    0.000000] ACPI: BERT 00000000bf77a910 00030 (v01     HP ProLiant 20110217 MSFT 00000097)
[    0.000000] ACPI: ERST 00000000bf77a940 001B0 (v01     HP ProLiant 20110217 MSFT 00000097)
[    0.000000] ACPI: HEST 00000000bf77aaf0 000A8 (v01     HP ProLiant 20110217 MSFT 00000097)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at 0000000000000000-0000000440000000
[    0.000000] Initmem setup node 0 0000000000000000-0000000440000000
[    0.000000]   NODE_DATA [000000043fffb000 - 000000043fffffff]
[    0.000000]  [ffffea0000000000-ffffea0010ffffff] PMD -> [ffff88042f600000-ffff88043f5fffff] on node 0
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   DMA32    0x00001000 -> 0x00100000
[    0.000000]   Normal   0x00100000 -> 0x00440000
[    0.000000] Movable zone start PFN for each node
[    0.000000] Early memory PFN ranges
[    0.000000]     0: 0x00000010 -> 0x00000099
[    0.000000]     0: 0x00000100 -> 0x000bf760
[    0.000000]     0: 0x00100000 -> 0x00440000
[    0.000000] On node 0 totalpages: 4191977
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 5 pages reserved
[    0.000000]   DMA zone: 3908 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 16320 pages used for memmap
[    0.000000]   DMA32 zone: 763808 pages, LIFO batch:31
[    0.000000]   Normal zone: 53248 pages used for memmap
[    0.000000]   Normal zone: 3354624 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x10] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x12] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x14] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x16] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x84] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x85] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x86] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x87] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x88] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x89] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x8a] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x8b] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x8c] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x8d] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x8e] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x10] lapic_id[0x8f] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x11] lapic_id[0x90] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x12] lapic_id[0x91] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x13] lapic_id[0x92] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x14] lapic_id[0x93] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x15] lapic_id[0x94] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x16] lapic_id[0x95] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x17] lapic_id[0x96] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x18] lapic_id[0x97] disabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: IOAPIC (id[0x03] address[0xfec8a000] gsi_base[24])
[    0.000000] IOAPIC[1]: apic_id 3, version 32, address 0xfec8a000, GSI 24-47
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[    0.000000] SMP: Allowing 24 CPUs, 20 hotplug CPUs
[    0.000000] nr_irqs_gsi: 64
[    0.000000] PM: Registered nosave memory: 0000000000099000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[    0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[    0.000000] PM: Registered nosave memory: 00000000bf760000 - 00000000bf76e000
[    0.000000] PM: Registered nosave memory: 00000000bf76e000 - 00000000bf770000
[    0.000000] PM: Registered nosave memory: 00000000bf770000 - 00000000bf77e000
[    0.000000] PM: Registered nosave memory: 00000000bf77e000 - 00000000bf7d0000
[    0.000000] PM: Registered nosave memory: 00000000bf7d0000 - 00000000bf7e0000
[    0.000000] PM: Registered nosave memory: 00000000bf7e0000 - 00000000bf7ed000
[    0.000000] PM: Registered nosave memory: 00000000bf7ed000 - 00000000c0000000
[    0.000000] PM: Registered nosave memory: 00000000c0000000 - 00000000e0000000
[    0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
[    0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fee00000
[    0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[    0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffa00000
[    0.000000] PM: Registered nosave memory: 00000000ffa00000 - 0000000100000000
[    0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:20000000)
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:24 nr_node_ids:1
[    0.000000] PERCPU: Embedded 28 pages/cpu @ffff88042f200000 s82176 r8192 d24320 u131072
[    0.000000] pcpu-alloc: s82176 r8192 d24320 u131072 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 
[    0.000000] pcpu-alloc: [0] 16 17 18 19 20 21 22 23 -- -- -- -- -- -- -- -- 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 4122340
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: root=/dev/mapper/togrog--1-root ro console=ttyS0,9600 console=tty0 ignore_loglevel
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 16417180k/17825792k available (4495k kernel code, 1057884k absent, 350728k reserved, 4327k data, 732k init)
[    0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=24, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] 	Verbose stalled-CPUs detection is disabled.
[    0.000000] NR_IRQS:4352 nr_irqs:1280 16
[    0.000000] Extended CMOS year: 2000
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] console [ttyS0] enabled
[    0.000000] allocated 67108864 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] hpet clockevent registered
[    0.003333] Fast TSC calibration using PIT
[    0.006666] Detected 1999.992 MHz processor.
[    0.000005] Calibrating delay loop (skipped), value calculated using timer frequency.. 4001.65 BogoMIPS (lpj=6666640)
[    0.127340] pid_max: default: 32768 minimum: 301
[    0.182717] Security Framework initialized
[    0.231820] AppArmor: AppArmor disabled by boot time parameter
[    0.303268] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[    0.396636] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.485249] Mount-cache hash table entries: 256
[    0.539732] Initializing cgroup subsys cpuacct
[    0.593000] Initializing cgroup subsys memory
[    0.645228] Initializing cgroup subsys devices
[    0.698489] Initializing cgroup subsys freezer
[    0.751751] Initializing cgroup subsys net_cls
[    0.805015] Initializing cgroup subsys blkio
[    0.856233] CPU: Physical Processor ID: 1
[    0.904293] CPU: Processor Core ID: 0
[    0.948193] mce: CPU supports 9 MCE banks
[    0.996264] CPU0: Thermal monitoring enabled (TM1)
[    1.053693] using mwait in idle threads.
[    1.101895] ACPI: Core revision 20120111
[    1.174541] ftrace: allocating 17484 entries in 69 pages
[    1.249636] DMAR: Host address width 40
[    1.295621] DMAR: DRHD base: 0x000000fbffe000 flags: 0x1
[    1.359303] IOMMU 0: reg_base_addr fbffe000 ver 1:0 cap c90780106f0462 ecap f020f6
[    1.450047] DMAR: RMRR base: 0x000000000ed000 end: 0x000000000effff
[    1.525156] DMAR: RMRR base: 0x000000bf7ed000 end: 0x000000bf7fffff
[    1.600266] DMAR: ATSR flags: 0x0
[    1.640200] Switched APIC routing to physical flat.
[    1.699268] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    1.804253] CPU0: Intel(R) Xeon(R) CPU           E5504  @ 2.00GHz stepping 05
[    1.994337] Performance Events: PEBS fmt1+, Nehalem events, Intel PMU driver.
[    2.080257] CPU erratum AAJ80 worked around
[    2.130392] CPUID marked event: 'bus cycles' unavailable
[    2.194050] ... version:                3
[    2.242104] ... bit width:              48
[    2.291201] ... generic registers:      4
[    2.339257] ... value mask:             0000ffffffffffff
[    2.402913] ... max period:             000000007fffffff
[    2.466571] ... fixed-purpose events:   3
[    2.514627] ... event mask:             000000070000000f
[    2.597950] NMI watchdog enabled, takes one hw-pmu counter.
[    2.690996] Booting Node   0, Processors  #1
[    2.740238] smpboot cpu 1: start_ip = 94000
[    2.823901] NMI watchdog enabled, takes one hw-pmu counter.
[    2.907669]  #2
[    2.926568] smpboot cpu 2: start_ip = 94000
[    3.010224] NMI watchdog enabled, takes one hw-pmu counter.
[    3.094329]  #3
[    3.113229] smpboot cpu 3: start_ip = 94000
[    3.196885] NMI watchdog enabled, takes one hw-pmu counter.
[    3.267642] Brought up 4 CPUs
[    3.303218] Total of 4 processors activated (16006.60 BogoMIPS).
[    3.377656] devtmpfs: initialized
[    3.420332] PM: Registering ACPI NVS region at bf77e000 (335872 bytes)
[    3.499539] NET: Registered protocol family 16
[    3.552923] ACPI: bus type pci registered
[    3.601051] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    3.712596] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    3.834020] PCI: Using configuration type 1 for base access
[    3.901576] bio: create slab <bio-0> at 0
[    3.949701] ACPI: Added _OSI(Module Device)
[    3.999842] ACPI: Added _OSI(Processor Device)
[    4.053097] ACPI: Added _OSI(3.0 _SCP Extensions)
[    4.109472] ACPI: Added _OSI(Processor Aggregator Device)
[    4.175207] ACPI: EC: Look up EC in DSDT
[    4.223268] ACPI: Executed 1 blocks of module-level executable AML code
[    4.305570] ACPI: SSDT 00000000bf77e1d0 007E8 (v01 DpgPmm  P001Ist 00000011 INTL 20051117)
[    4.405273] ACPI: Dynamic OEM Table Load:
[    4.453677] ACPI: SSDT           (null) 007E8 (v01 DpgPmm  P001Ist 00000011 INTL 20051117)
[    4.553164] ACPI: SSDT 00000000bf77e9c0 004D5 (v01  PmRef  P001Cst 00003001 INTL 20051117)
[    4.652809] ACPI: Dynamic OEM Table Load:
[    4.701215] ACPI: SSDT           (null) 004D5 (v01  PmRef  P001Cst 00003001 INTL 20051117)
[    4.800824] ACPI: Interpreter enabled
[    4.844721] ACPI: (supports S0 S4 S5)
[    4.889144] ACPI: Using IOAPIC for interrupt routing
[    4.955099] ACPI: No dock devices found.
[    5.002150] HEST: Table parsing has been initialized.
[    5.062688] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    5.172238] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    5.246438] pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7]
[    5.325707] pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff]
[    5.404969] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[    5.492585] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff]
[    5.580195] pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xdfffffff]
[    5.667807] pci_root PNP0A08:00: host bridge window [mem 0xf0000000-0xfed8ffff]
[    5.755456] PCI host bridge to bus 0000:00
[    5.804552] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    5.878615] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
[    5.952679] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    6.035063] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff]
[    6.117446] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xdfffffff]
[    6.199830] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfed8ffff]
[    6.282227] pci 0000:00:00.0: [8086:3406] type 0 class 0x000600
[    6.353232] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
[    6.426281] pci 0000:00:01.0: [8086:3408] type 1 class 0x000604
[    6.497287] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    6.570337] pci 0000:00:03.0: [8086:340a] type 1 class 0x000604
[    6.641343] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[    6.714389] pci 0000:00:07.0: [8086:340e] type 1 class 0x000604
[    6.785397] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
[    6.858444] pci 0000:00:09.0: [8086:3410] type 1 class 0x000604
[    6.929447] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
[    7.002496] pci 0000:00:0a.0: [8086:3411] type 1 class 0x000604
[    7.073499] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
[    7.146549] pci 0000:00:14.0: [8086:342e] type 0 class 0x000800
[    7.217569] pci 0000:00:14.1: [8086:3422] type 0 class 0x000800
[    7.288583] pci 0000:00:14.2: [8086:3423] type 0 class 0x000800
[    7.359608] pci 0000:00:1a.0: [8086:3a37] type 0 class 0x000c03
[    7.430596] pci 0000:00:1a.0: reg 20: [io  0xc800-0xc81f]
[    7.495360] pci 0000:00:1a.7: [8086:3a3c] type 0 class 0x000c03
[    7.566324] pci 0000:00:1a.7: reg 10: [mem 0xfaff8000-0xfaff83ff]
[    7.639441] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[    7.712491] pci 0000:00:1c.0: [8086:3a40] type 1 class 0x000604
[    7.783510] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    7.856557] pci 0000:00:1c.4: [8086:3a48] type 1 class 0x000604
[    7.927577] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[    8.000630] pci 0000:00:1d.0: [8086:3a34] type 0 class 0x000c03
[    8.071615] pci 0000:00:1d.0: reg 20: [io  0xc880-0xc89f]
[    8.136369] pci 0000:00:1d.1: [8086:3a35] type 0 class 0x000c03
[    8.207354] pci 0000:00:1d.1: reg 20: [io  0xcc00-0xcc1f]
[    8.272107] pci 0000:00:1d.2: [8086:3a36] type 0 class 0x000c03
[    8.343090] pci 0000:00:1d.2: reg 20: [io  0xd000-0xd01f]
[    8.407853] pci 0000:00:1d.7: [8086:3a3a] type 0 class 0x000c03
[    8.478819] pci 0000:00:1d.7: reg 10: [mem 0xfaffa000-0xfaffa3ff]
[    8.551936] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    8.624978] pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604
[    8.695984] pci 0000:00:1f.0: [8086:3a16] type 0 class 0x000601
[    8.767011] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0a00 (mask 00ff)
[    8.857751] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0ca0 (mask 003f)
[    8.948536] pci 0000:00:1f.2: [8086:3a22] type 0 class 0x000106
[    9.019499] pci 0000:00:1f.2: reg 10: [io  0xd880-0xd887]
[    9.084204] pci 0000:00:1f.2: reg 14: [io  0xd800-0xd803]
[    9.148907] pci 0000:00:1f.2: reg 18: [io  0xd480-0xd487]
[    9.213611] pci 0000:00:1f.2: reg 1c: [io  0xd400-0xd403]
[    9.278320] pci 0000:00:1f.2: reg 20: [io  0xd080-0xd09f]
[    9.343023] pci 0000:00:1f.2: reg 24: [mem 0xfaffc000-0xfaffc7ff]
[    9.416096] pci 0000:00:1f.2: PME# supported from D3hot
[    9.480058] pci 0000:00:01.0: PCI bridge to [bus 08-08]
[    9.542725] pci 0000:00:03.0: PCI bridge to [bus 07-07]
[    9.605393] pci 0000:00:07.0: PCI bridge to [bus 06-06]
[    9.668072] pci 0000:05:00.0: [8086:10c9] type 0 class 0x000200
[    9.739022] pci 0000:05:00.0: reg 10: [mem 0xfbe60000-0xfbe7ffff]
[    9.812056] pci 0000:05:00.0: reg 14: [mem 0xfbe40000-0xfbe5ffff]
[    9.885086] pci 0000:05:00.0: reg 18: [io  0xe880-0xe89f]
[    9.949795] pci 0000:05:00.0: reg 1c: [mem 0xfbeb8000-0xfbebbfff]
[   10.022841] pci 0000:05:00.0: reg 30: [mem 0xfbe20000-0xfbe3ffff pref]
[   10.101113] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
[   10.174176] pci 0000:05:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit]
[   10.254496] pci 0000:05:00.0: reg 190: [mem 0x00000000-0x00003fff 64bit]
[   10.334832] pci 0000:05:00.1: [8086:10c9] type 0 class 0x000200
[   10.405783] pci 0000:05:00.1: reg 10: [mem 0xfbee0000-0xfbefffff]
[   10.478816] pci 0000:05:00.1: reg 14: [mem 0xfbec0000-0xfbedffff]
[   10.551845] pci 0000:05:00.1: reg 18: [io  0xec00-0xec1f]
[   10.616548] pci 0000:05:00.1: reg 1c: [mem 0xfbebc000-0xfbebffff]
[   10.689597] pci 0000:05:00.1: reg 30: [mem 0xfbe80000-0xfbe9ffff pref]
[   10.767868] pci 0000:05:00.1: PME# supported from D0 D3hot D3cold
[   10.840924] pci 0000:05:00.1: reg 184: [mem 0x00000000-0x00003fff 64bit]
[   10.921246] pci 0000:05:00.1: reg 190: [mem 0x00000000-0x00003fff 64bit]
[   11.007441] pci 0000:00:09.0: PCI bridge to [bus 05-05]
[   11.070064] pci 0000:00:09.0:   bridge window [io  0xe000-0xefff]
[   11.143087] pci 0000:00:09.0:   bridge window [mem 0xfbe00000-0xfbefffff]
[   11.224472] pci 0000:00:0a.0: PCI bridge to [bus 04-04]
[   11.287142] pci 0000:00:1c.0: PCI bridge to [bus 03-03]
[   11.349770] pci 0000:00:1c.0:   bridge window [mem 0xf9f00000-0xf9ffffff 64bit pref]
[   11.442647] pci 0000:02:00.0: [102b:0522] type 0 class 0x000300
[   11.513607] pci 0000:02:00.0: reg 10: [mem 0xf8000000-0xf8ffffff pref]
[   11.591845] pci 0000:02:00.0: reg 14: [mem 0xfbdfc000-0xfbdfffff]
[   11.664881] pci 0000:02:00.0: reg 18: [mem 0xfb000000-0xfb7fffff]
[   11.737957] pci 0000:02:00.0: reg 30: [mem 0xfbde0000-0xfbdeffff pref]
[   11.816269] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[   11.936142] pci 0000:00:1c.4: PCI bridge to [bus 02-02]
[   11.998767] pci 0000:00:1c.4:   bridge window [mem 0xfb000000-0xfbdfffff]
[   12.080118] pci 0000:00:1c.4:   bridge window [mem 0xf8000000-0xf8ffffff 64bit pref]
[   12.172994] pci 0000:00:1e.0: PCI bridge to [bus 01-01] (subtractive decode)
[   12.257469] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
[   12.352364] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
[   12.447260] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[   12.550477] pci 0000:00:1e.0:   bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
[   12.653695] pci 0000:00:1e.0:   bridge window [mem 0xc0000000-0xdfffffff] (subtractive decode)
[   12.756912] pci 0000:00:1e.0:   bridge window [mem 0xf0000000-0xfed8ffff] (subtractive decode)
[   12.860163] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[   12.931291] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE1._PRT]
[   13.007468] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE3._PRT]
[   13.083647] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE9._PRT]
[   13.159816] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPEA._PRT]
[   13.236020] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[   13.312193] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
[   13.388364]  pci0000:00: Requesting ACPI _OSC control (0x1d)
[   13.456190]  pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[   13.558369] ACPI _OSC control for PCIe not granted, disabling ASPM
[   13.641955] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12 14 15)
[   13.726285] ACPI: PCI Interrupt Link [LNKB] (IRQs *5)
[   13.787386] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 11 12 14 *15)
[   13.871720] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 *11 12 14 15)
[   13.956040] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.
[   14.054246] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.
[   14.152458] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.
[   14.250678] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 6 7 10 11 12 *14 15)
[   14.335049] vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none
[   14.432028] vgaarb: loaded
[   14.464475] vgaarb: bridge control possible 0000:02:00.0
[   14.528167] PCI: Using ACPI for IRQ routing
[   14.585120] PCI: Discovered peer bus fe
[   14.631092] PCI: root bus fe: using default resources
[   14.691657] PCI host bridge to bus 0000:fe
[   14.740749] pci_bus 0000:fe: root bus resource [io  0x0000-0xffff]
[   14.814812] pci_bus 0000:fe: root bus resource [mem 0x00000000-0xffffffffff]
[   14.899281] pci 0000:fe:00.0: [8086:2c40] type 0 class 0x000600
[   14.970240] pci 0000:fe:00.1: [8086:2c01] type 0 class 0x000600
[   15.041207] pci 0000:fe:02.0: [8086:2c10] type 0 class 0x000600
[   15.112165] pci 0000:fe:02.1: [8086:2c11] type 0 class 0x000600
[   15.183129] pci 0000:fe:02.4: [8086:2c14] type 0 class 0x000600
[   15.254092] pci 0000:fe:02.5: [8086:2c15] type 0 class 0x000600
[   15.325055] pci 0000:fe:03.0: [8086:2c18] type 0 class 0x000600
[   15.396016] pci 0000:fe:03.1: [8086:2c19] type 0 class 0x000600
[   15.466973] pci 0000:fe:03.2: [8086:2c1a] type 0 class 0x000600
[   15.537932] pci 0000:fe:03.4: [8086:2c1c] type 0 class 0x000600
[   15.608896] pci 0000:fe:04.0: [8086:2c20] type 0 class 0x000600
[   15.679856] pci 0000:fe:04.1: [8086:2c21] type 0 class 0x000600
[   15.750818] pci 0000:fe:04.2: [8086:2c22] type 0 class 0x000600
[   15.821775] pci 0000:fe:04.3: [8086:2c23] type 0 class 0x000600
[   15.892736] pci 0000:fe:05.0: [8086:2c28] type 0 class 0x000600
[   15.963696] pci 0000:fe:05.1: [8086:2c29] type 0 class 0x000600
[   16.034659] pci 0000:fe:05.2: [8086:2c2a] type 0 class 0x000600
[   16.105620] pci 0000:fe:05.3: [8086:2c2b] type 0 class 0x000600
[   16.176580] pci 0000:fe:06.0: [8086:2c30] type 0 class 0x000600
[   16.247542] pci 0000:fe:06.1: [8086:2c31] type 0 class 0x000600
[   16.318503] pci 0000:fe:06.2: [8086:2c32] type 0 class 0x000600
[   16.389461] pci 0000:fe:06.3: [8086:2c33] type 0 class 0x000600
[   16.461031] PCI: pci_cache_line_size set to 64 bytes
[   16.520637] reserve RAM buffer: 0000000000099000 - 000000000009ffff 
[   16.594675] reserve RAM buffer: 00000000bf760000 - 00000000bfffffff 
[   16.671097] NetLabel: Initializing
[   16.714150] NetLabel:  domain hash size = 128
[   16.766363] NetLabel:  protocols = UNLABELED CIPSOv4
[   16.825872] NetLabel:  unlabeled traffic allowed by default
[   16.892653] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[   16.977125] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[   17.039568] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[   17.123206] Switching to clocksource hpet
[   17.177383] pnp: PnP ACPI init
[   17.214026] ACPI: bus type pnp registered
[   17.262189] pnp 00:00: [bus 00-ff]
[   17.302972] pnp 00:00: [io  0x0cf8-0x0cff]
[   17.352073] pnp 00:00: [io  0x0000-0x0cf7 window]
[   17.408455] pnp 00:00: [io  0x0d00-0xffff window]
[   17.464839] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[   17.529542] pnp 00:00: [mem 0x000d0000-0x000dffff window]
[   17.594244] pnp 00:00: [mem 0xc0000000-0xdfffffff window]
[   17.658947] pnp 00:00: [mem 0xf0000000-0xfed8ffff window]
[   17.723716] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[   17.810303] pnp 00:01: [mem 0xfbf00000-0xfbffffff]
[   17.867721] pnp 00:01: [mem 0xfc000000-0xfcffffff]
[   17.925145] pnp 00:01: [mem 0xfd000000-0xfdffffff]
[   17.982567] pnp 00:01: [mem 0xfe000000-0xfebfffff]
[   18.039991] pnp 00:01: [mem 0xfec8a000-0xfec8afff]
[   18.097415] pnp 00:01: [mem 0xfed10000-0xfed10fff]
[   18.154903] system 00:01: [mem 0xfbf00000-0xfbffffff] has been reserved
[   18.234174] system 00:01: [mem 0xfc000000-0xfcffffff] has been reserved
[   18.313444] system 00:01: [mem 0xfd000000-0xfdffffff] has been reserved
[   18.392716] system 00:01: [mem 0xfe000000-0xfebfffff] has been reserved
[   18.471983] system 00:01: [mem 0xfec8a000-0xfec8afff] could not be reserved
[   18.555415] system 00:01: [mem 0xfed10000-0xfed10fff] has been reserved
[   18.634685] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
[   18.716080] pnp 00:02: [dma 4]
[   18.752698] pnp 00:02: [io  0x0000-0x000f]
[   18.801798] pnp 00:02: [io  0x0081-0x0083]
[   18.850895] pnp 00:02: [io  0x0087]
[   18.892711] pnp 00:02: [io  0x0089-0x008b]
[   18.941808] pnp 00:02: [io  0x008f]
[   18.983625] pnp 00:02: [io  0x00c0-0x00df]
[   19.032760] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[   19.110999] pnp 00:03: [io  0x0070-0x0071]
[   19.160106] pnp 00:03: [irq 8]
[   19.196751] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[   19.275025] pnp 00:04: [io  0x0061]
[   19.316879] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
[   19.395115] pnp 00:05: [io  0x00f0-0x00ff]
[   19.444221] pnp 00:05: [irq 13]
[   19.481911] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[   19.560366] pnp 00:06: [io  0x03f8-0x03ff]
[   19.609473] pnp 00:06: [irq 4]
[   19.646089] pnp 00:06: [dma 0 disabled]
[   19.692149] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
[   19.770563] pnp 00:07: [io  0x0000-0xffffffffffffffff disabled]
[   19.841515] pnp 00:07: [io  0x0a00-0x0a7f]
[   19.890613] pnp 00:07: [io  0x0a80-0x0a83]
[   19.939709] pnp 00:07: [io  0x0a84-0x0a85]
[   19.988819] pnp 00:07: [io  0x0a86-0x0a8d]
[   20.037916] pnp 00:07: [io  0x0a90-0x0a9f]
[   20.087015] pnp 00:07: [io  0x0b00-0x0bfe]
[   20.136176] system 00:07: [io  0x0a00-0x0a7f] has been reserved
[   20.207125] system 00:07: [io  0x0a80-0x0a83] has been reserved
[   20.278073] system 00:07: [io  0x0a84-0x0a85] has been reserved
[   20.349016] system 00:07: [io  0x0a86-0x0a8d] has been reserved
[   20.419960] system 00:07: [io  0x0a90-0x0a9f] has been reserved
[   20.490905] system 00:07: [io  0x0b00-0x0bfe] has been reserved
[   20.561854] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[   20.643326] pnp 00:08: [io  0x0010-0x001f]
[   20.692426] pnp 00:08: [io  0x0022-0x003f]
[   20.741527] pnp 00:08: [io  0x0044-0x005f]
[   20.790631] pnp 00:08: [io  0x0062-0x0063]
[   20.840993] pnp 00:08: [io  0x0065-0x006f]
[   20.890094] pnp 00:08: [io  0x0072-0x007f]
[   20.939191] pnp 00:08: [io  0x0080]
[   20.981008] pnp 00:08: [io  0x0084-0x0086]
[   21.030105] pnp 00:08: [io  0x0088]
[   21.071919] pnp 00:08: [io  0x008c-0x008e]
[   21.121015] pnp 00:08: [io  0x0090-0x009f]
[   21.170112] pnp 00:08: [io  0x00a2-0x00bf]
[   21.219209] pnp 00:08: [io  0x00e0-0x00ef]
[   21.268305] pnp 00:08: [io  0x04d0-0x04d1]
[   21.317400] pnp 00:08: [io  0x0800-0x087f]
[   21.366497] pnp 00:08: [io  0x0000-0xffffffffffffffff disabled]
[   21.437441] pnp 00:08: [io  0x0500-0x057f]
[   21.486538] pnp 00:08: [io  0x0000-0xffffffffffffffff disabled]
[   21.557485] pnp 00:08: [io  0x0000-0xffffffffffffffff disabled]
[   21.628432] pnp 00:08: [mem 0xfed1c000-0xfed1ffff]
[   21.685852] pnp 00:08: [mem 0xfed20000-0xfed3ffff]
[   21.743276] pnp 00:08: [mem 0xfed40000-0xfed8ffff]
[   21.800776] system 00:08: [io  0x04d0-0x04d1] has been reserved
[   21.871724] system 00:08: [io  0x0800-0x087f] has been reserved
[   21.942672] system 00:08: [io  0x0500-0x057f] has been reserved
[   22.013615] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
[   22.092886] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
[   22.172162] system 00:08: [mem 0xfed40000-0xfed8ffff] has been reserved
[   22.251435] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[   22.332820] pnp 00:09: [io  0x0ca2]
[   22.374638] pnp 00:09: [io  0x0ca3]
[   22.416491] pnp 00:09: Plug and Play ACPI device, IDs IPI0001 (active)
[   22.494760] pnp 00:0a: [io  0x0ca4]
[   22.536579] pnp 00:0a: [io  0x0ca5]
[   22.578428] pnp 00:0a: Plug and Play ACPI device, IDs HPQ000b (active)
[   22.656706] pnp 00:0b: [mem 0xfed00000-0xfed003ff]
[   22.714161] pnp 00:0b: Plug and Play ACPI device, IDs PNP0103 (active)
[   22.792462] pnp 00:0c: [io  0x0060]
[   22.834283] pnp 00:0c: [io  0x0064]
[   22.876099] pnp 00:0c: [mem 0xfec00000-0xfec00fff]
[   22.933522] pnp 00:0c: [mem 0xfee00000-0xfee00fff]
[   22.991005] system 00:0c: [mem 0xfec00000-0xfec00fff] could not be reserved
[   23.074438] system 00:0c: [mem 0xfee00000-0xfee00fff] has been reserved
[   23.153704] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
[   23.235099] pnp 00:0d: [mem 0xe0000000-0xefffffff]
[   23.292580] system 00:0d: [mem 0xe0000000-0xefffffff] has been reserved
[   23.371854] system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
[   23.453358] pnp 00:0e: [mem 0x00000000-0x0009ffff]
[   23.510782] pnp 00:0e: [mem 0x000c0000-0x000cffff]
[   23.568203] pnp 00:0e: [mem 0x000e0000-0x000fffff]
[   23.625626] pnp 00:0e: [mem 0x00100000-0xbfffffff]
[   23.683052] pnp 00:0e: [mem 0xfed90000-0xffffffff]
[   23.740542] system 00:0e: [mem 0x00000000-0x0009ffff] could not be reserved
[   23.823976] system 00:0e: [mem 0x000c0000-0x000cffff] could not be reserved
[   23.907405] system 00:0e: [mem 0x000e0000-0x000fffff] could not be reserved
[   23.990844] system 00:0e: [mem 0x00100000-0xbfffffff] could not be reserved
[   24.074274] system 00:0e: [mem 0xfed90000-0xffffffff] could not be reserved
[   24.157703] system 00:0e: Plug and Play ACPI device, IDs PNP0c01 (active)
[   24.239176] pnp: PnP ACPI: found 15 devices
[   24.289316] ACPI: ACPI bus type pnp unregistered
[   24.351285] PCI: max bus depth: 1 pci_try_num: 2
[   24.406688] pci 0000:00:1c.4: BAR 13: assigned [io  0x1000-0x1fff]
[   24.480760] pci 0000:00:1c.0: BAR 14: assigned [mem 0xc0000000-0xc03fffff]
[   24.563152] pci 0000:00:1c.0: BAR 13: assigned [io  0x2000-0x2fff]
[   24.637218] pci 0000:00:01.0: PCI bridge to [bus 08-08]
[   24.699849] pci 0000:00:03.0: PCI bridge to [bus 07-07]
[   24.762481] pci 0000:00:07.0: PCI bridge to [bus 06-06]
[   24.825122] pci 0000:05:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit]
[   24.905442] pci 0000:05:00.0: reg 190: [mem 0x00000000-0x00003fff 64bit]
[   24.985758] pci 0000:05:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit]
[   25.066076] pci 0000:05:00.1: reg 184: [mem 0x00000000-0x00003fff 64bit]
[   25.146392] pci 0000:05:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit]
[   25.226710] pci 0000:05:00.0: reg 190: [mem 0x00000000-0x00003fff 64bit]
[   25.307025] pci 0000:05:00.1: reg 190: [mem 0x00000000-0x00003fff 64bit]
[   25.387342] pci 0000:05:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit]
[   25.467659] pci 0000:05:00.0: reg 190: [mem 0x00000000-0x00003fff 64bit]
[   25.547977] pci 0000:05:00.1: reg 184: [mem 0x00000000-0x00003fff 64bit]
[   25.628293] pci 0000:05:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit]
[   25.708601] pci 0000:05:00.0: BAR 7: assigned [mem 0xfbe00000-0xfbe1ffff 64bit]
[   25.796232] pci 0000:05:00.0: reg 190: [mem 0x00000000-0x00003fff 64bit]
[   25.876540] pci 0000:05:00.0: BAR 10: can't assign mem (size 0x20000)
[   25.953739] pci 0000:05:00.1: reg 184: [mem 0x00000000-0x00003fff 64bit]
[   26.034046] pci 0000:05:00.1: BAR 7: can't assign mem (size 0x20000)
[   26.110201] pci 0000:05:00.1: reg 190: [mem 0x00000000-0x00003fff 64bit]
[   26.190507] pci 0000:05:00.1: BAR 10: can't assign mem (size 0x20000)
[   26.267698] pci 0000:00:09.0: PCI bridge to [bus 05-05]
[   26.330320] pci 0000:00:09.0:   bridge window [io  0xe000-0xefff]
[   26.403348] pci 0000:00:09.0:   bridge window [mem 0xfbe00000-0xfbefffff]
[   26.484700] pci 0000:00:0a.0: PCI bridge to [bus 04-04]
[   26.547332] pci 0000:00:1c.0: PCI bridge to [bus 03-03]
[   26.609956] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
[   26.682988] pci 0000:00:1c.0:   bridge window [mem 0xc0000000-0xc03fffff]
[   26.764337] pci 0000:00:1c.0:   bridge window [mem 0xf9f00000-0xf9ffffff 64bit pref]
[   26.857163] pci 0000:00:1c.4: PCI bridge to [bus 02-02]
[   26.919788] pci 0000:00:1c.4:   bridge window [io  0x1000-0x1fff]
[   26.992816] pci 0000:00:1c.4:   bridge window [mem 0xfb000000-0xfbdfffff]
[   27.074170] pci 0000:00:1c.4:   bridge window [mem 0xf8000000-0xf8ffffff 64bit pref]
[   27.166995] pci 0000:00:1e.0: PCI bridge to [bus 01-01]
[   27.229645] pci 0000:00:1c.0: enabling device (0146 -> 0147)
[   27.297493] pci 0000:00:1e.0: setting latency timer to 64
[   27.362196] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[   27.428984] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[   27.495767] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[   27.570876] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[   27.645980] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xdfffffff]
[   27.721084] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfed8ffff]
[   27.796187] pci_bus 0000:05: resource 0 [io  0xe000-0xefff]
[   27.862973] pci_bus 0000:05: resource 1 [mem 0xfbe00000-0xfbefffff]
[   27.938080] pci_bus 0000:03: resource 0 [io  0x2000-0x2fff]
[   28.004872] pci_bus 0000:03: resource 1 [mem 0xc0000000-0xc03fffff]
[   28.079982] pci_bus 0000:03: resource 2 [mem 0xf9f00000-0xf9ffffff 64bit pref]
[   28.166562] pci_bus 0000:02: resource 0 [io  0x1000-0x1fff]
[   28.233349] pci_bus 0000:02: resource 1 [mem 0xfb000000-0xfbdfffff]
[   28.308457] pci_bus 0000:02: resource 2 [mem 0xf8000000-0xf8ffffff 64bit pref]
[   28.395036] pci_bus 0000:01: resource 4 [io  0x0000-0x0cf7]
[   28.461818] pci_bus 0000:01: resource 5 [io  0x0d00-0xffff]
[   28.528601] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff]
[   28.603703] pci_bus 0000:01: resource 7 [mem 0x000d0000-0x000dffff]
[   28.678808] pci_bus 0000:01: resource 8 [mem 0xc0000000-0xdfffffff]
[   28.753915] pci_bus 0000:01: resource 9 [mem 0xf0000000-0xfed8ffff]
[   28.829023] pci_bus 0000:fe: resource 4 [io  0x0000-0xffff]
[   28.895806] pci_bus 0000:fe: resource 5 [mem 0x00000000-0xffffffffff]
[   28.973033] NET: Registered protocol family 2
[   29.025646] IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
[   29.115694] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[   29.207447] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[   29.287933] TCP: Hash tables configured (established 524288 bind 65536)
[   29.367204] TCP reno registered
[   29.404884] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[   29.477982] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[   29.556392] NET: Registered protocol family 1
[   29.608832] pci 0000:02:00.0: Boot video device
[   29.663168] PCI: CLS 256 bytes, default 64
[   29.712313] Unpacking initramfs...
[   31.033794] Freeing initrd memory: 8624k freed
[   31.088615] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[   31.165818] Placing 64MB software IO TLB between ffff8800bb74e000 - ffff8800bf74e000
[   31.258645] software IO TLB at phys 0xbb74e000 - 0xbf74e000
[   31.325442] Simple Boot Flag at 0x6d set to 0x80
[   31.381294] audit: initializing netlink socket (disabled)
[   31.446009] type=2000 audit(1335593079.699:1): initialized
[   31.512726] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[   31.592194] VFS: Disk quotas dquot_6.5.2
[   31.639284] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[   31.716578] msgmni has been set to 32081
[   31.763779] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[   31.852462] io scheduler noop registered
[   31.899481] io scheduler deadline registered
[   31.950727] io scheduler cfq registered (default)
[   32.007460] pcieport 0000:00:1c.0: irq 64 for MSI/MSI-X
[   32.070191] pcieport 0000:00:1c.4: irq 65 for MSI/MSI-X
[   32.132973] intel_idle: MWAIT substates: 0x1120
[   32.187286] intel_idle: v0.4 model 0x1A
[   32.233266] intel_idle: lapic_timer_reliable_states 0x2
[   32.295965] ERST: Failed to get Error Log Address Range.
[   32.359701] [Firmware Warn]: GHES: Poll interval is 0 for generic hardware error source: 1, disabled.
[   32.381919] Refined TSC clocksource calibration: 2000.069 MHz.
[   32.381922] Switching to clocksource tsc
[   32.587230] GHES: APEI firmware first mode is enabled by WHEA _OSC.
[   32.662418] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[   32.759203] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[   32.852031] 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[   32.919031] Linux agpgart interface v0.103
[   32.968219] i8042: PNP: No PS/2 controller found. Probing ports directly.
[   34.813793] i8042: Failed to disable AUX port, but continuing anyway... Is this a SiS?
[   34.908693] i8042: If AUX port is really absent please use the 'i8042.noaux' option
[   36.762474] serio: i8042 KBD port at 0x60,0x64 irq 1
[   36.822062] mousedev: PS/2 mouse device common for all mice
[   36.889418] rtc_cmos 00:03: RTC can wake from S4
[   36.944862] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[   37.017917] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[   37.099339] cpuidle: using governor ladder
[   37.149788] cpuidle: using governor menu
[   37.197001] TCP cubic registered
[   37.235893] NET: Registered protocol family 10
[   37.289710] NET: Registered protocol family 17
[   37.343036] Registering the dns_resolver key type
[   37.400703] PM: Hibernation image not present or could not be loaded.
[   37.477966] registered taskstats version 1
[   37.528503] rtc_cmos 00:03: setting system clock to 2012-04-28 06:05:15 UTC (1335593115)
[   37.627343] Initializing network drop monitor service
[   37.689790] Freeing unused kernel memory: 732k freed
[   37.749464] Write protecting the kernel read-only data: 8192k
[   37.824266] Freeing unused kernel memory: 1632k freed
[   37.887620] Freeing unused kernel memory: 656k freed
[   37.956656] udevd[47]: starting version 182
[   38.009547] md: raid10 personality registered for level 10
[   38.076352] device-mapper: uevent: version 1.0.3
[   38.132056] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[   38.266289] usbcore: registered new interface driver usbfs
[   38.332333] usbcore: registered new interface driver hub
[   38.396328] usbcore: registered new device driver usb
[   38.457356] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[   38.459675] SCSI subsystem initialized
[   38.461671] libata version 3.00 loaded.
[   38.462414] ahci 0000:00:1f.2: version 3.0
[   38.675622] ahci 0000:00:1f.2: irq 66 for MSI/MSI-X
[   38.734186] ahci: SSS flag set, parallel bus scan disabled
[   38.800032] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
[   38.898118] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ccc ems sxs 
[   39.002468] ahci 0000:00:1f.2: setting latency timer to 64
[   39.003353] uhci_hcd: USB Universal Host Controller Interface driver
[   39.176451] scsi0 : ahci
[   39.207218] scsi1 : ahci
[   39.237994] scsi2 : ahci
[   39.268818] scsi3 : ahci
[   39.299644] scsi4 : ahci
[   39.330423] scsi5 : ahci
[   39.361017] ata1: SATA max UDMA/133 abar m2048@0xfaffc000 port 0xfaffc100 irq 66
[   39.449730] ata2: SATA max UDMA/133 abar m2048@0xfaffc000 port 0xfaffc180 irq 66
[   39.538453] ata3: SATA max UDMA/133 abar m2048@0xfaffc000 port 0xfaffc200 irq 66
[   39.627172] ata4: SATA max UDMA/133 abar m2048@0xfaffc000 port 0xfaffc280 irq 66
[   39.715889] ata5: SATA max UDMA/133 abar m2048@0xfaffc000 port 0xfaffc300 irq 66
[   39.804606] ata6: SATA max UDMA/133 abar m2048@0xfaffc000 port 0xfaffc380 irq 66
[   39.893453] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[   39.963435] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[   40.026150] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[   40.114903] ehci_hcd 0000:00:1a.7: debug port 1
[   40.173142] ehci_hcd 0000:00:1a.7: cache line size of 256 is not supported
[   40.212277] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   40.213221] ata1.00: ATA-8: ST2000NM0011, SN02, max UDMA/133
[   40.213225] ata1.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[   40.214209] ata1.00: configured for UDMA/133
[   40.214569] scsi 0:0:0:0: Direct-Access     ATA      ST2000NM0011     SN02 PQ: 0 ANSI: 5
[   40.532297] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   40.533219] ata2.00: ATA-8: ST2000NM0011, SN02, max UDMA/133
[   40.533222] ata2.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[   40.534191] ata2.00: configured for UDMA/133
[   40.534349] scsi 1:0:0:0: Direct-Access     ATA      ST2000NM0011     SN02 PQ: 0 ANSI: 5
[   40.852366] ata3: SATA link down (SStatus 0 SControl 300)
[   41.063022] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfaff8000
[   41.138884] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[   41.172376] ata4: SATA link down (SStatus 0 SControl 300)
[   41.272777] hub 1-0:1.0: USB hub found
[   41.317791] hub 1-0:1.0: 2 ports detected
[   41.366012] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[   41.435980] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[   41.492321] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[   41.493991] ata5.00: ATAPI: hp      DVD RAM UJ892, 1.23, max UDMA/100
[   41.496616] ata5.00: configured for UDMA/100
[   41.503386] scsi 4:0:0:0: CD-ROM            hp       DVD RAM UJ892    1.23 PQ: 0 ANSI: 5
[   41.798069] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[   41.822326] ata6: SATA link down (SStatus 0 SControl 300)
[   41.827092] sd 0:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[   41.827097] sd 1:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[   41.827134] sd 0:0:0:0: [sda] Write Protect is off
[   41.827137] sd 1:0:0:0: [sdb] Write Protect is off
[   41.827140] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   41.827143] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[   41.827156] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[   41.827159] sd 1:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[   41.834552]  sdb: sdb1 sdb2
[   41.838255]  sda: sda1 sda2
[   42.658932] ehci_hcd 0000:00:1d.7: debug port 1
[   42.658978] sd 1:0:0:0: [sdb] Attached SCSI disk
[   42.659023] sd 0:0:0:0: [sda] Attached SCSI disk
[   42.662669] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[   42.662672] cdrom: Uniform CD-ROM driver Revision: 3.20
[   42.662979] sr 4:0:0:0: Attached scsi CD-ROM sr0
[   43.035507] ehci_hcd 0000:00:1d.7: cache line size of 256 is not supported
[   43.118052] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfaffa000
[   43.195777] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[   43.265067] hub 2-0:1.0: USB hub found
[   43.310073] hub 2-0:1.0: 6 ports detected
[   43.358422] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[   43.428521] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[   43.491353] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[   43.580176] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000c800
[   43.649479] hub 3-0:1.0: USB hub found
[   43.694562] hub 3-0:1.0: 2 ports detected
[   43.742766] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[   43.812736] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[   43.875444] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4
[   43.964263] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000c880
[   44.033526] hub 4-0:1.0: USB hub found
[   44.078536] hub 4-0:1.0: 2 ports detected
[   44.126845] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[   44.196888] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[   44.259588] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 5
[   44.348342] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000cc00
[   44.417639] hub 5-0:1.0: USB hub found
[   44.462704] hub 5-0:1.0: 2 ports detected
[   44.510982] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[   44.580964] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[   44.643671] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 6
[   44.732407] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d000
[   44.801510] hub 6-0:1.0: USB hub found
[   44.846583] hub 6-0:1.0: 2 ports detected
[   44.901947] mdassemble: sending ioctl 800c0910 to a partition!
[   44.971985] mdassemble: sending ioctl 800c0910 to a partition!
[   45.041988] mdassemble: sending ioctl 1261 to a partition!
[   45.107838] mdassemble: sending ioctl 1261 to a partition!
[   45.173964] mdassemble: sending ioctl 1261 to a partition!
[   45.239782] mdassemble: sending ioctl 1261 to a partition!
[   45.305817] mdassemble: sending ioctl 1261 to a partition!
[   45.371674] mdassemble: sending ioctl 1261 to a partition!
[   45.437762] mdassemble: sending ioctl 1261 to a partition!
[   45.503576] mdassemble: sending ioctl 1261 to a partition!
[   45.572136] md: md0 stopped.
[   45.608043] md: bind<sda1>
[   45.640968] md: bind<sdb1>
[   45.674864] md: raid1 personality registered for level 1
[   45.739029] bio: create slab <bio-1> at 1
[   45.787398] md/raid1:md0: active with 2 out of 2 mirrors
[   45.851151] md0: detected capacity change from 0 to 197263360
[   45.923201] md: md1 stopped.
[   45.959197] md: bind<sda2>
[   45.992089] md: bind<sdb2>
[   46.026600] md/raid1:md1: active with 2 out of 2 mirrors
[   46.090425] md1: detected capacity change from 0 to 2000201449472
[   46.169841]  md0: unknown partition table
[   46.231210]  md1: unknown partition table

Offline

#2 2012-05-30 05:43:11

marzn
Member
Registered: 2011-09-24
Posts: 2

Re: New kernel won't boot, fails to assemble RAID then stalls

I have the same problem, did you find a solution yet?

Offline

#3 2012-05-30 06:32:18

marzn
Member
Registered: 2011-09-24
Posts: 2

Re: New kernel won't boot, fails to assemble RAID then stalls

The solution for my problem was reinstalling linux-firmware & linux. Maybe this can help you too.

I have booted from a live cd and doing these steps:

RAID Array scan

mdadm --examine --scan > /etc/mdadm.conf

RAID Array start

mdadm --assemble /dev/md1
mdadm --assemble /dev/md2
mdadm --assemble /dev/md3
mdadm --assemble /dev/md4

LVM scan & aktivieren

vgscan
vgchange -a y

Mounten von „root“ & „boot“

mount /dev/mapper/root-root /mnt/root/
mount /dev/md1 /mnt/root/boot/

In „chroot“ wechseln

cd /mnt/root/

„dev“, „proc“, „sys“ einbinden

mount -t proc proc proc/
mount -t sysfs sys sys/
mount -o bind /dev/ dev/

Nun / ändern

chroot ./

Reinstalling packages with

pacman -S linux-firmware linux

May I could help you


--
jesus loves you

Offline

#4 2012-05-30 06:47:13

jasonwryan
Anarchist
From: .nz
Registered: 2009-05-09
Posts: 30,426
Website

Re: New kernel won't boot, fails to assemble RAID then stalls

marzn: please read the Forum Etiquette. Please use [ code ] tags when pasting and prepend LC_ALL=C to posted commands so that the output will be in English.


Also, it would be a good idea to rebuild your intramfs before exiting the chroot...

Arch + dwm   •   Mercurial repos  •   Surfraw

Registered Linux User #482438

Offline

Pages: 1

Board footer

Powered by FluxBB