You are not logged in.
Hey there!
I've used xfce as DE for a while but I consider switching/trying a WM, i.e. awesome.
I'm using a Thinkpad T400 with a docking station connected to an Eizo FlexSan S2231W (I use the open source ati drivers). Until now xfce has taken care of setting the correct screen resolutions: if the notebook is connected to the dock and the lid is closed, the notebook monitor (LVDS) is disabled, only the external monitor is enabled and the correct resolution is set:
$ xrandr -q
Screen 0: minimum 320 x 200, current 1680 x 1050, maximum 8192 x 8192
DVI-0 connected 1680x1050+0+0 (normal left inverted right x axis y axis) 474mm x 297mm
1680x1050 59.9*+
1280x1024 60.0
1280x960 60.0
1024x768 60.0
800x600 60.3
640x480 60.0
720x400 70.1
LVDS connected (normal left inverted right x axis y axis)
1440x900 60.2 +
1280x854 59.9
1280x800 59.8
1280x720 59.9
1152x768 59.8
1024x768 59.9
800x600 59.9
848x480 59.7
720x480 59.7
640x480 59.4
VGA-0 disconnected (normal left inverted right x axis y axis)When disconnected from the dock, the DVI output is disabled and the correct LVDS resolution is set. Apparently xfce stores this information in ~/.config/xfce4/xfconf/xfce-perchannel-xml/displays.xml: (note the diffrenent settings for "Default" and "MinimalAutoConfig")
<?xml version="1.0" encoding="UTF-8"?>
<channel name="displays" version="1.0">
<property name="Default" type="empty">
<property name="LVDS" type="string" value="Laptop">
<property name="Active" type="bool" value="false"/>
<property name="Resolution" type="string" value="1440x900"/>
<property name="RefreshRate" type="double" value="60.153082"/>
<property name="Rotation" type="int" value="0"/>
<property name="Reflection" type="string" value="0"/>
<property name="Primary" type="bool" value="false"/>
<property name="Position" type="empty">
<property name="X" type="int" value="0"/>
<property name="Y" type="int" value="0"/>
</property>
</property>
<property name="DVI-0" type="string" value="ENC 22"">
<property name="Active" type="bool" value="true"/>
<property name="Resolution" type="string" value="1680x1050"/>
<property name="RefreshRate" type="double" value="59.883253"/>
<property name="Rotation" type="int" value="0"/>
<property name="Reflection" type="string" value="0"/>
<property name="Primary" type="bool" value="false"/>
<property name="Position" type="empty">
<property name="X" type="int" value="0"/>
<property name="Y" type="int" value="0"/>
</property>
</property>
</property>
<property name="MinimalAutoConfig" type="empty">
<property name="LVDS" type="string" value="Laptop">
<property name="Active" type="bool" value="true"/>
<property name="Resolution" type="string" value="1280x800"/>
<property name="RefreshRate" type="double" value="59.810326"/>
<property name="Rotation" type="int" value="0"/>
<property name="Reflection" type="string" value="0"/>
<property name="Primary" type="bool" value="false"/>
<property name="Position" type="empty">
<property name="X" type="int" value="0"/>
<property name="Y" type="int" value="0"/>
</property>
</property>
<property name="VGA-0" type="string" value="Bildschirm">
<property name="Active" type="bool" value="true"/>
<property name="Resolution" type="string" value="1280x800"/>
<property name="RefreshRate" type="double" value="59.810326"/>
<property name="Rotation" type="int" value="0"/>
<property name="Reflection" type="string" value="0"/>
<property name="Primary" type="bool" value="false"/>
<property name="Position" type="empty">
<property name="X" type="int" value="0"/>
<property name="Y" type="int" value="0"/>
</property>
</property>
</property>
</channel>Of course, when starting an awesome session these configurations are not recognized ... Issuing these two commands brings me in my "docked/external monitor" configuration:
$ xrandr --output LVDS --off
$ xrandr --output DVI-0 --mode 1680x1050However, I want X automatically recognize the situation (docked/undocked) and set the correct configuration. I know I've to set up a correct xorg.conf file but I don't know where to start, the man page really overwhelms me...
Any hints would be appreciated very much!
Thanks & regards
Last edited by ball (2012-05-31 14:10:23)
Offline
Offline
Thanks -- I've installed autorandr and saved profiles "docked" and "laptop". Loading the profile via "autorandr --change" works but I want to have the right resolution without typing this command or any shortcut issuing this command.
I tried to insert the command in ~/.xinitrc like this:
$ cat .xinitrc
#!/bin/sh
#
# ~/.xinitrc
#
# Executed by startx (run your window manager from here)
if [ -d /etc/X11/xinit/xinitrc.d ]; then
for f in /etc/X11/xinit/xinitrc.d/*; do
[ -x "$f" ] && . "$f"
done
unset f
fi
# Disable bell in X
xset -b
DEFAULT_SESSION=startxfce4
case $1 in
xfce4)
exec startxfce4
;;
awesome)
exec awesome
exec autorandr --change
;;
*)
exec $DEFAULT_SESSION
;;
esacBut this doesn't have any effect when starting an awesome session... Any ideas how to automatically load the profile on startup?
Offline
The 'autorandr --change' doesn't have any effect because you call it after starting awesome. Also, I think the call to autorandr should be without the exec:
autorandr --change
exec awesomeOffline
Instead of:
exec awesome
exec autorandr --changeUse
autorandr --change
exec awesomeOnce "exec" is run, the current process exits. So anything after an "exec" command is discarded. See `man exec`.
As far as this process being automatic... It is possible by listening to RandR events or maybe udev, but I don't know of any tool that does this outside of desktop environments. Perhaps I will write one; but it is difficult to get the details worked out correctly.
Typically, people just assign a key binding to something like autorandr and hit it whenever the monitor configuration has changed. It's a pretty simple solution to what is probably complex automatic solution. (But maybe I'm missing something. It's early.)
Education is favorable to liberty. Freedom can exist only in a society of knowledge. Without learning, men are incapable of knowing their rights, and where learning is confined to a few people, liberty can be neither equal nor universal.
Tu ne cede malis sed contra audentior ito
Offline
Use
autorandr --change exec awesome
This works. Thanks.
Typically, people just assign a key binding to something like autorandr and hit it whenever the monitor configuration has changed. It's a pretty simple solution to what is probably complex automatic solution. (But maybe I'm missing something. It's early.)
The problem here is, everytime awesome starts the wrong resolution is loaded, because autorandr doesn't make any changes to the resolutions permanent.
I wouldn't have any problems, if I'd to hit a key only whenever the monitor configuration has changed -- but the solution indicated by you seems to work for now...
Offline