Arch Linux

UnsolvedCypher

Member

Registered: 2012-04-28

Posts: 201

Having Trouble with WiFi (Ralink RT3070)

I just did my first install of Arch, and I am loving it. My one problem now is getting the wireless to work. I have a Linklyl WUSB100 v2 RangePlus Wireless Network Adapter, which looks like it just isn't recognized. I did some searching, but couldn't find much. Could anyone help me?
   Thanks so much! ~Unsolved Cypher

Gusar

Member

Registered: 2009-08-25

Posts: 3,605

Re: Having Trouble with WiFi (Ralink RT3070)

Troubleshooting wireless issues is always the same procedure: First, lspci -nn or lsusb output, we need the ID of the thing. Second, the output of dmesg.

UnsolvedCypher

Member

Registered: 2012-04-28

Posts: 201

Re: Having Trouble with WiFi (Ralink RT3070)

Troubleshooting wireless issues is always the same procedure: First, lspci -nn or lsusb output, we need the ID of the thing. Second, the output of dmesg.

Bus 003 Device 005: ID 1737:0078 Linksys WUSB100 v2 RangePlus Wireless Network Adapter [Ralink RT3070] is the output of lsusb

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.3.7-1-ARCH (tobias@T-POWA-LX) (gcc version 4.7.0 20120505 (prerelease) (GCC) ) #1 SMP PREEMPT Tue May 22 00:26:26 CEST 2012
[    0.000000] Command line: root=/dev/disk/by-uuid/23304351-07ed-4b96-87aa-43aaddb96b00 ro
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009d800 (usable)
[    0.000000]  BIOS-e820: 000000000009d800 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 0000000020000000 (usable)
[    0.000000]  BIOS-e820: 0000000020000000 - 0000000020200000 (reserved)
[    0.000000]  BIOS-e820: 0000000020200000 - 0000000040000000 (usable)
[    0.000000]  BIOS-e820: 0000000040000000 - 0000000040200000 (reserved)
[    0.000000]  BIOS-e820: 0000000040200000 - 00000000bab08000 (usable)
[    0.000000]  BIOS-e820: 00000000bab08000 - 00000000bab60000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000bab60000 - 00000000bada8000 (reserved)
[    0.000000]  BIOS-e820: 00000000bada8000 - 00000000badb9000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000badb9000 - 00000000badd0000 (reserved)
[    0.000000]  BIOS-e820: 00000000badd0000 - 00000000badd2000 (usable)
[    0.000000]  BIOS-e820: 00000000badd2000 - 00000000badda000 (reserved)
[    0.000000]  BIOS-e820: 00000000badda000 - 00000000bade5000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000bade5000 - 00000000bae41000 (reserved)
[    0.000000]  BIOS-e820: 00000000bae41000 - 00000000bae84000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000bae84000 - 00000000bb000000 (usable)
[    0.000000]  BIOS-e820: 00000000bb800000 - 00000000bfa00000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
[    0.000000]  BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[    0.000000]  BIOS-e820: 0000000100000000 - 000000023fe00000 (usable)
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] DMI 2.6 present.
[    0.000000] DMI: System manufacturer System Product Name/P8Z68-V LE, BIOS 0805 11/10/2011
[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[    0.000000] No AGP bridge found
[    0.000000] last_pfn = 0x23fe00 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-CFFFF write-protect
[    0.000000]   D0000-E7FFF uncachable
[    0.000000]   E8000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask E00000000 write-back
[    0.000000]   1 base 200000000 mask FC0000000 write-back
[    0.000000]   2 base 0BB800000 mask FFF800000 uncachable
[    0.000000]   3 base 0BC000000 mask FFC000000 uncachable
[    0.000000]   4 base 0C0000000 mask FC0000000 uncachable
[    0.000000]   5 base 23FE00000 mask FFFE00000 uncachable
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] e820 update range: 00000000bb800000 - 0000000100000000 (usable) ==> (reserved)
[    0.000000] last_pfn = 0xbb000 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [ffff8800000fcdc0] fcdc0
[    0.000000] initial memory mapped : 0 - 20000000
[    0.000000] Base memory trampoline at [ffff880000098000] 98000 size 20480
[    0.000000] init_memory_mapping: 0000000000000000-00000000bb000000
[    0.000000]  0000000000 - 00bb000000 page 2M
[    0.000000] kernel direct mapping tables up to bb000000 @ 1fffc000-20000000
[    0.000000] init_memory_mapping: 0000000100000000-000000023fe00000
[    0.000000]  0100000000 - 023fe00000 page 2M
[    0.000000] kernel direct mapping tables up to 23fe00000 @ baff6000-bb000000
[    0.000000] RAMDISK: 1fd1b000 - 1fff0000
[    0.000000] ACPI: RSDP 00000000000f0420 00024 (v02 ALASKA)
[    0.000000] ACPI: XSDT 00000000bab53068 0004C (v01 ALASKA    A M I 01072009 AMI  00010013)
[    0.000000] ACPI: FACP 00000000bab5c8a0 000F4 (v04 ALASKA    A M I 01072009 AMI  00010013)
[    0.000000] ACPI: DSDT 00000000bab53140 09759 (v02 ALASKA    A M I 00000000 INTL 20051117)
[    0.000000] ACPI: FACS 00000000baddcf80 00040
[    0.000000] ACPI: APIC 00000000bab5c998 00072 (v03 ALASKA    A M I 01072009 AMI  00010013)
[    0.000000] ACPI: SSDT 00000000bab5ca10 00102 (v01 AMICPU     PROC 00000001 MSFT 03000001)
[    0.000000] ACPI: MCFG 00000000bab5cb18 0003C (v01 ALASKA    A M I 01072009 MSFT 00000097)
[    0.000000] ACPI: HPET 00000000bab5cb58 00038 (v01 ALASKA    A M I 01072009 AMI. 00000004)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at 0000000000000000-000000023fe00000
[    0.000000] Initmem setup node 0 0000000000000000-000000023fe00000
[    0.000000]   NODE_DATA [000000023fdfb000 - 000000023fdfffff]
[    0.000000]  [ffffea0000000000-ffffea0008ffffff] PMD -> [ffff880237400000-ffff88023f3fffff] on node 0
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   DMA32    0x00001000 -> 0x00100000
[    0.000000]   Normal   0x00100000 -> 0x0023fe00
[    0.000000] Movable zone start PFN for each node
[    0.000000] Early memory PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009d
[    0.000000]     0: 0x00000100 -> 0x00020000
[    0.000000]     0: 0x00020200 -> 0x00040000
[    0.000000]     0: 0x00040200 -> 0x000bab08
[    0.000000]     0: 0x000badd0 -> 0x000badd2
[    0.000000]     0: 0x000bae84 -> 0x000bb000
[    0.000000]     0: 0x00100000 -> 0x0023fe00
[    0.000000] On node 0 totalpages: 2074131
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 5 pages reserved
[    0.000000]   DMA zone: 3912 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 16320 pages used for memmap
[    0.000000]   DMA32 zone: 743622 pages, LIFO batch:31
[    0.000000]   Normal zone: 20472 pages used for memmap
[    0.000000]   Normal zone: 1289736 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
[    0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[    0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[    0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000020200000
[    0.000000] PM: Registered nosave memory: 0000000040000000 - 0000000040200000
[    0.000000] PM: Registered nosave memory: 00000000bab08000 - 00000000bab60000
[    0.000000] PM: Registered nosave memory: 00000000bab60000 - 00000000bada8000
[    0.000000] PM: Registered nosave memory: 00000000bada8000 - 00000000badb9000
[    0.000000] PM: Registered nosave memory: 00000000badb9000 - 00000000badd0000
[    0.000000] PM: Registered nosave memory: 00000000badd2000 - 00000000badda000
[    0.000000] PM: Registered nosave memory: 00000000badda000 - 00000000bade5000
[    0.000000] PM: Registered nosave memory: 00000000bade5000 - 00000000bae41000
[    0.000000] PM: Registered nosave memory: 00000000bae41000 - 00000000bae84000
[    0.000000] PM: Registered nosave memory: 00000000bb000000 - 00000000bb800000
[    0.000000] PM: Registered nosave memory: 00000000bb800000 - 00000000bfa00000
[    0.000000] PM: Registered nosave memory: 00000000bfa00000 - 00000000fed1c000
[    0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
[    0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000ff000000
[    0.000000] PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
[    0.000000] Allocating PCI resources starting at bfa00000 (gap: bfa00000:3f31c000)
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] PERCPU: Embedded 28 pages/cpu @ffff88023fa00000 s82176 r8192 d24320 u524288
[    0.000000] pcpu-alloc: s82176 r8192 d24320 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 2037270
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: root=/dev/disk/by-uuid/23304351-07ed-4b96-87aa-43aaddb96b00 ro
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 8084872k/9435136k available (4495k kernel code, 1138612k absent, 211652k reserved, 4327k data, 732k init)
[    0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] 	Verbose stalled-CPUs detection is disabled.
[    0.000000] NR_IRQS:4352 nr_irqs:712 16
[    0.000000] Extended CMOS year: 2000
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] allocated 33554432 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] hpet clockevent registered
[    0.000000] Fast TSC calibration using PIT
[    0.003333] Detected 3110.118 MHz processor.
[    0.000001] Calibrating delay loop (skipped), value calculated using timer frequency.. 6222.41 BogoMIPS (lpj=10367060)
[    0.000004] pid_max: default: 32768 minimum: 301
[    0.000021] Security Framework initialized
[    0.000024] AppArmor: AppArmor disabled by boot time parameter
[    0.000550] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.001882] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.002414] Mount-cache hash table entries: 256
[    0.002495] Initializing cgroup subsys cpuacct
[    0.002497] Initializing cgroup subsys memory
[    0.002502] Initializing cgroup subsys devices
[    0.002503] Initializing cgroup subsys freezer
[    0.002505] Initializing cgroup subsys net_cls
[    0.002506] Initializing cgroup subsys blkio
[    0.002528] CPU: Physical Processor ID: 0
[    0.002529] CPU: Processor Core ID: 0
[    0.002533] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.002533] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.002536] mce: CPU supports 9 MCE banks
[    0.002546] CPU0: Thermal monitoring enabled (TM1)
[    0.002552] using mwait in idle threads.
[    0.003479] ACPI: Core revision 20120111
[    0.131177] ftrace: allocating 17485 entries in 69 pages
[    0.139341] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.172320] CPU0: Intel(R) Core(TM) i5-2400 CPU @ 3.10GHz stepping 07
[    0.276589] Performance Events: PEBS fmt1+, SandyBridge events, Intel PMU driver.
[    0.276593] PEBS disabled due to CPU errata.
[    0.276594] ... version:                3
[    0.276595] ... bit width:              48
[    0.276596] ... generic registers:      8
[    0.276597] ... value mask:             0000ffffffffffff
[    0.276598] ... max period:             000000007fffffff
[    0.276599] ... fixed-purpose events:   3
[    0.276600] ... event mask:             00000007000000ff
[    0.296645] NMI watchdog enabled, takes one hw-pmu counter.
[    0.323233] Booting Node   0, Processors  #1
[    0.323236] smpboot cpu 1: start_ip = 98000
[    0.354454] NMI watchdog enabled, takes one hw-pmu counter.
[    0.373209]  #2
[    0.373211] smpboot cpu 2: start_ip = 98000
[    0.404422] NMI watchdog enabled, takes one hw-pmu counter.
[    0.423166]  #3 Ok.
[    0.423168] smpboot cpu 3: start_ip = 98000
[    0.454278] NMI watchdog enabled, takes one hw-pmu counter.
[    0.459787] Brought up 4 CPUs
[    0.459790] Total of 4 processors activated (24890.65 BogoMIPS).
[    0.462518] devtmpfs: initialized
[    0.463495] PM: Registering ACPI NVS region at bab08000 (360448 bytes)
[    0.463500] PM: Registering ACPI NVS region at bada8000 (69632 bytes)
[    0.463502] PM: Registering ACPI NVS region at badda000 (45056 bytes)
[    0.463505] PM: Registering ACPI NVS region at bae41000 (274432 bytes)
[    0.464015] NET: Registered protocol family 16
[    0.464087] ACPI: bus type pci registered
[    0.464131] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
[    0.464134] PCI: not using MMCONFIG
[    0.464135] PCI: Using configuration type 1 for base access
[    0.464505] bio: create slab <bio-0> at 0
[    0.464541] ACPI: Added _OSI(Module Device)
[    0.464542] ACPI: Added _OSI(Processor Device)
[    0.464543] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.464545] ACPI: Added _OSI(Processor Aggregator Device)
[    0.465357] ACPI: EC: Look up EC in DSDT
[    0.466114] ACPI: Executed 1 blocks of module-level executable AML code
[    0.467735] ACPI: SSDT 00000000baddb918 003E0 (v01    AMI      IST 00000001 MSFT 03000001)
[    0.467968] ACPI: Dynamic OEM Table Load:
[    0.467970] ACPI: SSDT           (null) 003E0 (v01    AMI      IST 00000001 MSFT 03000001)
[    0.467988] ACPI: SSDT 00000000baddad98 00120 (v01    AMI      CST 00000001 MSFT 03000001)
[    0.468187] ACPI: Dynamic OEM Table Load:
[    0.468188] ACPI: SSDT           (null) 00120 (v01    AMI      CST 00000001 MSFT 03000001)
[    0.468518] ACPI: Interpreter enabled
[    0.468520] ACPI: (supports S0 S1 S3 S4 S5)
[    0.468533] ACPI: Using IOAPIC for interrupt routing
[    0.468547] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
[    0.468582] PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] reserved in ACPI motherboard resources
[    0.479579] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    0.482755] ACPI: EC: GPE = 0x18, I/O: command/status = 0x66, data = 0x62
[    0.482858] ACPI: No dock devices found.
[    0.482860] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.482974] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.483081] pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7]
[    0.483083] pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff]
[    0.483085] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[    0.483086] pci_root PNP0A08:00: host bridge window [mem 0x000c8000-0x000dffff]
[    0.483088] pci_root PNP0A08:00: host bridge window [mem 0xbfa00000-0xffffffff]
[    0.483091] pci_root PNP0A08:00: ignoring host bridge window [mem 0x000c8000-0x000dffff] (conflicts with Video ROM [mem 0x000c0000-0x000cdfff])
[    0.483115] PCI host bridge to bus 0000:00
[    0.483116] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    0.483118] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
[    0.483119] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    0.483121] pci_bus 0000:00: root bus resource [mem 0xbfa00000-0xffffffff]
[    0.483127] pci 0000:00:00.0: [8086:0100] type 0 class 0x000600
[    0.483155] pci 0000:00:01.0: [8086:0101] type 1 class 0x000604
[    0.483179] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.483195] pci 0000:00:02.0: [8086:0102] type 0 class 0x000300
[    0.483202] pci 0000:00:02.0: reg 10: [mem 0xfe000000-0xfe3fffff 64bit]
[    0.483207] pci 0000:00:02.0: reg 18: [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.483211] pci 0000:00:02.0: reg 20: [io  0xf000-0xf03f]
[    0.483256] pci 0000:00:16.0: [8086:1c3a] type 0 class 0x000780
[    0.483277] pci 0000:00:16.0: reg 10: [mem 0xfe608000-0xfe60800f 64bit]
[    0.483348] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.483380] pci 0000:00:1a.0: [8086:1c2d] type 0 class 0x000c03
[    0.483399] pci 0000:00:1a.0: reg 10: [mem 0xfe607000-0xfe6073ff]
[    0.483484] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.483508] pci 0000:00:1b.0: [8086:1c20] type 0 class 0x000403
[    0.483522] pci 0000:00:1b.0: reg 10: [mem 0xfe600000-0xfe603fff 64bit]
[    0.483585] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.483607] pci 0000:00:1c.0: [8086:1c10] type 1 class 0x000604
[    0.483681] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.483706] pci 0000:00:1c.2: [8086:1c14] type 1 class 0x000604
[    0.483779] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.483804] pci 0000:00:1c.3: [8086:1c16] type 1 class 0x000604
[    0.483878] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.483902] pci 0000:00:1c.4: [8086:1c18] type 1 class 0x000604
[    0.483976] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[    0.483999] pci 0000:00:1c.5: [8086:1c1a] type 1 class 0x000604
[    0.484073] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[    0.484097] pci 0000:00:1c.6: [8086:1c1c] type 1 class 0x000604
[    0.484171] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
[    0.484194] pci 0000:00:1c.7: [8086:244e] type 1 class 0x000604
[    0.484268] pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
[    0.484296] pci 0000:00:1d.0: [8086:1c26] type 0 class 0x000c03
[    0.484315] pci 0000:00:1d.0: reg 10: [mem 0xfe606000-0xfe6063ff]
[    0.484401] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.484426] pci 0000:00:1f.0: [8086:1c44] type 0 class 0x000601
[    0.484544] pci 0000:00:1f.2: [8086:1c02] type 0 class 0x000106
[    0.484561] pci 0000:00:1f.2: reg 10: [io  0xf0b0-0xf0b7]
[    0.484568] pci 0000:00:1f.2: reg 14: [io  0xf0a0-0xf0a3]
[    0.484575] pci 0000:00:1f.2: reg 18: [io  0xf090-0xf097]
[    0.484582] pci 0000:00:1f.2: reg 1c: [io  0xf080-0xf083]
[    0.484590] pci 0000:00:1f.2: reg 20: [io  0xf060-0xf07f]
[    0.484597] pci 0000:00:1f.2: reg 24: [mem 0xfe605000-0xfe6057ff]
[    0.484638] pci 0000:00:1f.2: PME# supported from D3hot
[    0.484655] pci 0000:00:1f.3: [8086:1c22] type 0 class 0x000c05
[    0.484669] pci 0000:00:1f.3: reg 10: [mem 0xfe604000-0xfe6040ff 64bit]
[    0.484689] pci 0000:00:1f.3: reg 20: [io  0xf040-0xf05f]
[    0.484728] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[    0.484772] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[    0.484821] pci 0000:00:1c.2: PCI bridge to [bus 03-03]
[    0.484870] pci 0000:00:1c.3: PCI bridge to [bus 04-04]
[    0.484946] pci 0000:05:00.0: [1b21:1042] type 0 class 0x000c03
[    0.484974] pci 0000:05:00.0: reg 10: [mem 0xfe500000-0xfe507fff 64bit]
[    0.485119] pci 0000:05:00.0: PME# supported from D3hot D3cold
[    0.489782] pci 0000:00:1c.4: PCI bridge to [bus 05-05]
[    0.489791] pci 0000:00:1c.4:   bridge window [mem 0xfe500000-0xfe5fffff]
[    0.489888] pci 0000:06:00.0: [1b21:1042] type 0 class 0x000c03
[    0.489916] pci 0000:06:00.0: reg 10: [mem 0xfe400000-0xfe407fff 64bit]
[    0.490061] pci 0000:06:00.0: PME# supported from D3hot D3cold
[    0.496440] pci 0000:00:1c.5: PCI bridge to [bus 06-06]
[    0.496449] pci 0000:00:1c.5:   bridge window [mem 0xfe400000-0xfe4fffff]
[    0.496542] pci 0000:07:00.0: [10ec:8168] type 0 class 0x000200
[    0.496561] pci 0000:07:00.0: reg 10: [io  0xe000-0xe0ff]
[    0.496594] pci 0000:07:00.0: reg 18: [mem 0xd0004000-0xd0004fff 64bit pref]
[    0.496615] pci 0000:07:00.0: reg 20: [mem 0xd0000000-0xd0003fff 64bit pref]
[    0.496704] pci 0000:07:00.0: supports D1 D2
[    0.496705] pci 0000:07:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.503103] pci 0000:00:1c.6: PCI bridge to [bus 07-07]
[    0.503109] pci 0000:00:1c.6:   bridge window [io  0xe000-0xefff]
[    0.503121] pci 0000:00:1c.6:   bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
[    0.503199] pci 0000:08:00.0: [1b21:1080] type 1 class 0x000604
[    0.503319] pci 0000:00:1c.7: PCI bridge to [bus 08-09] (subtractive decode)
[    0.503329] pci 0000:00:1c.7:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
[    0.503330] pci 0000:00:1c.7:   bridge window [io  0x0d00-0xffff] (subtractive decode)
[    0.503332] pci 0000:00:1c.7:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    0.503334] pci 0000:00:1c.7:   bridge window [mem 0xbfa00000-0xffffffff] (subtractive decode)
[    0.503446] pci 0000:08:00.0: PCI bridge to [bus 09-09] (subtractive decode)
[    0.503468] pci 0000:08:00.0:   bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
[    0.503470] pci 0000:08:00.0:   bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
[    0.503471] pci 0000:08:00.0:   bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
[    0.503473] pci 0000:08:00.0:   bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
[    0.503475] pci 0000:08:00.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
[    0.503476] pci 0000:08:00.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
[    0.503478] pci 0000:08:00.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    0.503479] pci 0000:08:00.0:   bridge window [mem 0xbfa00000-0xffffffff] (subtractive decode)
[    0.503523] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.503575] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
[    0.503592] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT]
[    0.503607] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]
[    0.503621] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
[    0.503636] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX5._PRT]
[    0.503650] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX6._PRT]
[    0.503668] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX7.BR19._PRT]
[    0.503697] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[    0.503767]  pci0000:00: Requesting ACPI _OSC control (0x1d)
[    0.503887]  pci0000:00: ACPI _OSC control (0x1c) granted
[    0.506451] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[    0.506481] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[    0.506509] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.506537] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
[    0.506564] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[    0.506592] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[    0.506620] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 7 10 11 12 14 15)
[    0.506648] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[    0.506700] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.506705] vgaarb: loaded
[    0.506705] vgaarb: bridge control possible 0000:00:02.0
[    0.506728] PCI: Using ACPI for IRQ routing
[    0.508043] PCI: pci_cache_line_size set to 64 bytes
[    0.508113] reserve RAM buffer: 000000000009d800 - 000000000009ffff 
[    0.508115] reserve RAM buffer: 00000000bab08000 - 00000000bbffffff 
[    0.508117] reserve RAM buffer: 00000000badd2000 - 00000000bbffffff 
[    0.508119] reserve RAM buffer: 00000000bb000000 - 00000000bbffffff 
[    0.508120] reserve RAM buffer: 000000023fe00000 - 000000023fffffff 
[    0.508182] NetLabel: Initializing
[    0.508184] NetLabel:  domain hash size = 128
[    0.508184] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.508194] NetLabel:  unlabeled traffic allowed by default
[    0.508202] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.508206] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.510218] Switching to clocksource hpet
[    0.513819] pnp: PnP ACPI init
[    0.513830] ACPI: bus type pnp registered
[    0.513914] pnp 00:00: [bus 00-ff]
[    0.513915] pnp 00:00: [io  0x0cf8-0x0cff]
[    0.513917] pnp 00:00: [io  0x0000-0x0cf7 window]
[    0.513918] pnp 00:00: [io  0x0d00-0xffff window]
[    0.513920] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[    0.513921] pnp 00:00: [mem 0x000c8000-0x000dffff window]
[    0.513922] pnp 00:00: [mem 0xbfa00000-0xffffffff window]
[    0.513924] pnp 00:00: [mem 0x00000000 window]
[    0.513958] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[    0.513991] pnp 00:01: [mem 0xfed10000-0xfed19fff]
[    0.513994] pnp 00:01: [mem 0xe0000000-0xe3ffffff]
[    0.513995] pnp 00:01: [mem 0xfed90000-0xfed93fff]
[    0.513996] pnp 00:01: [mem 0xfed20000-0xfed3ffff]
[    0.513997] pnp 00:01: [mem 0xfee00000-0xfee0ffff]
[    0.514023] system 00:01: [mem 0xfed10000-0xfed19fff] has been reserved
[    0.514025] system 00:01: [mem 0xe0000000-0xe3ffffff] has been reserved
[    0.514027] system 00:01: [mem 0xfed90000-0xfed93fff] has been reserved
[    0.514028] system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.514030] system 00:01: [mem 0xfee00000-0xfee0ffff] has been reserved
[    0.514032] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.514070] pnp 00:02: [io  0x0000-0xffffffffffffffff disabled]
[    0.514072] pnp 00:02: [io  0x0000-0xffffffffffffffff disabled]
[    0.514073] pnp 00:02: [io  0x0290-0x029f]
[    0.514074] pnp 00:02: [io  0x0000-0xffffffffffffffff disabled]
[    0.514096] system 00:02: [io  0x0290-0x029f] has been reserved
[    0.514098] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.514180] pnp 00:03: [dma 4]
[    0.514181] pnp 00:03: [io  0x0000-0x000f]
[    0.514182] pnp 00:03: [io  0x0081-0x0083]
[    0.514183] pnp 00:03: [io  0x0087]
[    0.514185] pnp 00:03: [io  0x0089-0x008b]
[    0.514186] pnp 00:03: [io  0x008f]
[    0.514187] pnp 00:03: [io  0x00c0-0x00df]
[    0.514201] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.514207] pnp 00:04: [io  0x0070-0x0071]
[    0.514214] pnp 00:04: [irq 8]
[    0.514228] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.514233] pnp 00:05: [io  0x0061]
[    0.514246] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
[    0.514255] pnp 00:06: [io  0x0010-0x001f]
[    0.514256] pnp 00:06: [io  0x0022-0x003f]
[    0.514257] pnp 00:06: [io  0x0044-0x005f]
[    0.514259] pnp 00:06: [io  0x0063]
[    0.514260] pnp 00:06: [io  0x0065]
[    0.514261] pnp 00:06: [io  0x0067-0x006f]
[    0.514262] pnp 00:06: [io  0x0072-0x007f]
[    0.514263] pnp 00:06: [io  0x0080]
[    0.514264] pnp 00:06: [io  0x0084-0x0086]
[    0.514265] pnp 00:06: [io  0x0088]
[    0.514266] pnp 00:06: [io  0x008c-0x008e]
[    0.514267] pnp 00:06: [io  0x0090-0x009f]
[    0.514268] pnp 00:06: [io  0x00a2-0x00bf]
[    0.514269] pnp 00:06: [io  0x00e0-0x00ef]
[    0.514270] pnp 00:06: [io  0x04d0-0x04d1]
[    0.514296] system 00:06: [io  0x04d0-0x04d1] has been reserved
[    0.514298] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.514303] pnp 00:07: [io  0x00f0-0x00ff]
[    0.514307] pnp 00:07: [irq 13]
[    0.514321] pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.514479] pnp 00:08: [io  0x03f8-0x03ff]
[    0.514483] pnp 00:08: [irq 4]
[    0.514484] pnp 00:08: [dma 0 disabled]
[    0.514524] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.514600] pnp 00:09: [io  0x0400-0x0453]
[    0.514601] pnp 00:09: [io  0x0458-0x047f]
[    0.514603] pnp 00:09: [io  0x0000-0xffffffffffffffff disabled]
[    0.514604] pnp 00:09: [io  0x0500-0x057f]
[    0.514605] pnp 00:09: [mem 0xfed1c000-0xfed1ffff]
[    0.514606] pnp 00:09: [mem 0xfec00000-0xfecfffff]
[    0.514608] pnp 00:09: [mem 0xfed08000-0xfed08fff]
[    0.514609] pnp 00:09: [mem 0xff000000-0xffffffff]
[    0.514634] system 00:09: [io  0x0400-0x0453] has been reserved
[    0.514636] system 00:09: [io  0x0458-0x047f] has been reserved
[    0.514637] system 00:09: [io  0x0500-0x057f] has been reserved
[    0.514639] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.514641] system 00:09: [mem 0xfec00000-0xfecfffff] could not be reserved
[    0.514643] system 00:09: [mem 0xfed08000-0xfed08fff] has been reserved
[    0.514644] system 00:09: [mem 0xff000000-0xffffffff] has been reserved
[    0.514646] system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.514667] pnp 00:0a: [io  0x0454-0x0457]
[    0.514691] system 00:0a: [io  0x0454-0x0457] has been reserved
[    0.514693] system 00:0a: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.514756] pnp 00:0b: [mem 0xfed00000-0xfed003ff]
[    0.514778] pnp 00:0b: Plug and Play ACPI device, IDs PNP0103 (active)
[    0.514865] pnp: PnP ACPI: found 12 devices
[    0.514866] ACPI: ACPI bus type pnp unregistered
[    0.520789] PCI: max bus depth: 2 pci_try_num: 3
[    0.520850] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[    0.520855] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[    0.520865] pci 0000:00:1c.2: PCI bridge to [bus 03-03]
[    0.520875] pci 0000:00:1c.3: PCI bridge to [bus 04-04]
[    0.520886] pci 0000:00:1c.4: PCI bridge to [bus 05-05]
[    0.520891] pci 0000:00:1c.4:   bridge window [mem 0xfe500000-0xfe5fffff]
[    0.520898] pci 0000:00:1c.5: PCI bridge to [bus 06-06]
[    0.520903] pci 0000:00:1c.5:   bridge window [mem 0xfe400000-0xfe4fffff]
[    0.520910] pci 0000:00:1c.6: PCI bridge to [bus 07-07]
[    0.520913] pci 0000:00:1c.6:   bridge window [io  0xe000-0xefff]
[    0.520920] pci 0000:00:1c.6:   bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
[    0.520926] pci 0000:08:00.0: PCI bridge to [bus 09-09]
[    0.520945] pci 0000:00:1c.7: PCI bridge to [bus 08-09]
[    0.521007] pci 0000:08:00.0: setting latency timer to 64
[    0.521012] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.521013] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.521015] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.521016] pci_bus 0000:00: resource 7 [mem 0xbfa00000-0xffffffff]
[    0.521018] pci_bus 0000:05: resource 1 [mem 0xfe500000-0xfe5fffff]
[    0.521019] pci_bus 0000:06: resource 1 [mem 0xfe400000-0xfe4fffff]
[    0.521021] pci_bus 0000:07: resource 0 [io  0xe000-0xefff]
[    0.521022] pci_bus 0000:07: resource 2 [mem 0xd0000000-0xd00fffff 64bit pref]
[    0.521024] pci_bus 0000:08: resource 4 [io  0x0000-0x0cf7]
[    0.521025] pci_bus 0000:08: resource 5 [io  0x0d00-0xffff]
[    0.521027] pci_bus 0000:08: resource 6 [mem 0x000a0000-0x000bffff]
[    0.521028] pci_bus 0000:08: resource 7 [mem 0xbfa00000-0xffffffff]
[    0.521030] pci_bus 0000:09: resource 8 [io  0x0000-0x0cf7]
[    0.521031] pci_bus 0000:09: resource 9 [io  0x0d00-0xffff]
[    0.521032] pci_bus 0000:09: resource 10 [mem 0x000a0000-0x000bffff]
[    0.521034] pci_bus 0000:09: resource 11 [mem 0xbfa00000-0xffffffff]
[    0.521052] NET: Registered protocol family 2
[    0.521208] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.521857] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[    0.522825] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.522941] TCP: Hash tables configured (established 524288 bind 65536)
[    0.522942] TCP reno registered
[    0.522952] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    0.522978] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    0.523044] NET: Registered protocol family 1
[    0.523771] pci 0000:00:02.0: BIOS left Intel GPU interrupts enabled; disabling
[    0.524115] pci 0000:00:02.0: Boot video device
[    0.770190] PCI: CLS 64 bytes, default 64
[    0.770222] Unpacking initramfs...
[    0.809037] Freeing initrd memory: 2900k freed
[    0.809265] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.809267] Placing 64MB software IO TLB between ffff8800b6b08000 - ffff8800bab08000
[    0.809268] software IO TLB at phys 0xb6b08000 - 0xbab08000
[    0.809623] audit: initializing netlink socket (disabled)
[    0.809634] type=2000 audit(1338963390.533:1): initialized
[    0.809964] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.811366] VFS: Disk quotas dquot_6.5.2
[    0.811398] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.811455] msgmni has been set to 15796
[    0.811582] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.811613] io scheduler noop registered
[    0.811614] io scheduler deadline registered
[    0.811651] io scheduler cfq registered (default)
[    0.811724] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[    0.811803] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
[    0.811897] pcieport 0000:00:1c.2: irq 42 for MSI/MSI-X
[    0.811989] pcieport 0000:00:1c.3: irq 43 for MSI/MSI-X
[    0.812081] pcieport 0000:00:1c.4: irq 44 for MSI/MSI-X
[    0.812174] pcieport 0000:00:1c.5: irq 45 for MSI/MSI-X
[    0.812266] pcieport 0000:00:1c.6: irq 46 for MSI/MSI-X
[    0.812333] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
[    0.812336] pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
[    0.812350] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[    0.812354] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[    0.812367] pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt
[    0.812371] pcie_pme 0000:00:1c.2:pcie01: service driver pcie_pme loaded
[    0.812384] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
[    0.812388] pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
[    0.812402] pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt
[    0.812404] pci 0000:05:00.0: Signaling PME through PCIe PME interrupt
[    0.812408] pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded
[    0.812421] pcieport 0000:00:1c.5: Signaling PME through PCIe PME interrupt
[    0.812423] pci 0000:06:00.0: Signaling PME through PCIe PME interrupt
[    0.812426] pcie_pme 0000:00:1c.5:pcie01: service driver pcie_pme loaded
[    0.812440] pcieport 0000:00:1c.6: Signaling PME through PCIe PME interrupt
[    0.812441] pci 0000:07:00.0: Signaling PME through PCIe PME interrupt
[    0.812445] pcie_pme 0000:00:1c.6:pcie01: service driver pcie_pme loaded
[    0.812499] intel_idle: MWAIT substates: 0x1120
[    0.812500] intel_idle: v0.4 model 0x2A
[    0.812501] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.812525] GHES: HEST is not enabled!
[    0.812568] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    0.833105] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.853820] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.853966] Linux agpgart interface v0.103
[    0.854012] i8042: PNP: No PS/2 controller found. Probing ports directly.
[    0.856630] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.856654] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.856725] mousedev: PS/2 mouse device common for all mice
[    0.856769] rtc_cmos 00:04: RTC can wake from S4
[    0.856860] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[    0.856886] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    0.856932] cpuidle: using governor ladder
[    0.856989] cpuidle: using governor menu
[    0.857089] TCP cubic registered
[    0.857162] NET: Registered protocol family 10
[    0.857405] NET: Registered protocol family 17
[    0.857407] Registering the dns_resolver key type
[    0.857550] PM: Hibernation image not present or could not be loaded.
[    0.857555] registered taskstats version 1
[    0.858064] rtc_cmos 00:04: setting system clock to 2012-06-06 06:16:31 UTC (1338963391)
[    0.858108] Initializing network drop monitor service
[    0.858973] Freeing unused kernel memory: 732k freed
[    0.859040] Write protecting the kernel read-only data: 8192k
[    0.862257] Freeing unused kernel memory: 1632k freed
[    0.863694] Freeing unused kernel memory: 656k freed
[    0.868983] udevd[44]: starting version 184
[    0.886499] usbcore: registered new interface driver usbfs
[    0.886514] usbcore: registered new interface driver hub
[    0.886565] usbcore: registered new device driver usb
[    0.887719] SCSI subsystem initialized
[    0.887721] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.887769] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[    0.887772] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[    0.887788] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    0.887805] ehci_hcd 0000:00:1a.0: broken D3 during system sleep on ASUS
[    0.887820] ehci_hcd 0000:00:1a.0: debug port 2
[    0.888069] xhci_hcd 0000:05:00.0: xHCI Host Controller
[    0.888076] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 2
[    0.889258] libata version 3.00 loaded.
[    0.891707] ehci_hcd 0000:00:1a.0: Enabling legacy PCI PM
[    0.891731] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
[    0.891747] ehci_hcd 0000:00:1a.0: irq 23, io mem 0xfe607000
[    0.899975] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    0.900078] hub 1-0:1.0: USB hub found
[    0.900081] hub 1-0:1.0: 2 ports detected
[    0.900162] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[    0.900164] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[    0.900170] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 3
[    0.900186] ehci_hcd 0000:00:1d.0: broken D3 during system sleep on ASUS
[    0.900204] ehci_hcd 0000:00:1d.0: debug port 2
[    0.904087] ehci_hcd 0000:00:1d.0: Enabling legacy PCI PM
[    0.904097] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
[    0.904101] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xfe606000
[    0.913297] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    0.913430] hub 3-0:1.0: USB hub found
[    0.913432] hub 3-0:1.0: 2 ports detected
[    0.913496] ahci 0000:00:1f.2: version 3.0
[    0.913566] ahci 0000:00:1f.2: irq 47 for MSI/MSI-X
[    0.913649] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x20 impl SATA mode
[    0.913651] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst 
[    0.913657] ahci 0000:00:1f.2: setting latency timer to 64
[    0.914217] scsi0 : ahci
[    0.914346] scsi1 : ahci
[    0.914452] scsi2 : ahci
[    0.914635] scsi3 : ahci
[    0.914755] scsi4 : ahci
[    0.914898] scsi5 : ahci
[    0.915013] ata1: DUMMY
[    0.915014] ata2: DUMMY
[    0.915015] ata3: DUMMY
[    0.915015] ata4: DUMMY
[    0.915016] ata5: DUMMY
[    0.915019] ata6: SATA max UDMA/133 abar m2048@0xfe605000 port 0xfe605380 irq 47
[    0.949186] xhci_hcd 0000:05:00.0: irq 16, io mem 0xfe500000
[    0.949287] xhci_hcd 0000:05:00.0: irq 48 for MSI/MSI-X
[    0.949291] xhci_hcd 0000:05:00.0: irq 49 for MSI/MSI-X
[    0.949295] xhci_hcd 0000:05:00.0: irq 50 for MSI/MSI-X
[    0.949299] xhci_hcd 0000:05:00.0: irq 51 for MSI/MSI-X
[    0.949303] xhci_hcd 0000:05:00.0: irq 52 for MSI/MSI-X
[    0.949510] xHCI xhci_add_endpoint called for root hub
[    0.949512] xHCI xhci_check_bandwidth called for root hub
[    0.949535] hub 2-0:1.0: USB hub found
[    0.949542] hub 2-0:1.0: 2 ports detected
[    0.949585] xhci_hcd 0000:05:00.0: xHCI Host Controller
[    0.949589] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 4
[    0.949719] xHCI xhci_add_endpoint called for root hub
[    0.949721] xHCI xhci_check_bandwidth called for root hub
[    0.949743] hub 4-0:1.0: USB hub found
[    0.949748] hub 4-0:1.0: 2 ports detected
[    0.949847] xhci_hcd 0000:06:00.0: xHCI Host Controller
[    0.949855] xhci_hcd 0000:06:00.0: new USB bus registered, assigned bus number 5
[    1.010949] xhci_hcd 0000:06:00.0: irq 17, io mem 0xfe400000
[    1.011048] xhci_hcd 0000:06:00.0: irq 53 for MSI/MSI-X
[    1.011051] xhci_hcd 0000:06:00.0: irq 54 for MSI/MSI-X
[    1.011054] xhci_hcd 0000:06:00.0: irq 55 for MSI/MSI-X
[    1.011058] xhci_hcd 0000:06:00.0: irq 56 for MSI/MSI-X
[    1.011061] xhci_hcd 0000:06:00.0: irq 57 for MSI/MSI-X
[    1.011230] xHCI xhci_add_endpoint called for root hub
[    1.011232] xHCI xhci_check_bandwidth called for root hub
[    1.011250] hub 5-0:1.0: USB hub found
[    1.011256] hub 5-0:1.0: 2 ports detected
[    1.011298] xhci_hcd 0000:06:00.0: xHCI Host Controller
[    1.011302] xhci_hcd 0000:06:00.0: new USB bus registered, assigned bus number 6
[    1.011407] xHCI xhci_add_endpoint called for root hub
[    1.011409] xHCI xhci_check_bandwidth called for root hub
[    1.011434] hub 6-0:1.0: USB hub found
[    1.011440] hub 6-0:1.0: 2 ports detected
[    1.209781] usb 1-1: new high-speed USB device number 2 using ehci_hcd
[    1.233103] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.245104] ata6.00: ATA-8: MKNSSDCR120GB, 502ABBF0, max UDMA/133
[    1.245109] ata6.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    1.255009] ata6.00: configured for UDMA/133
[    1.255223] scsi 5:0:0:0: Direct-Access     ATA      MKNSSDCR120GB    502A PQ: 0 ANSI: 5
[    1.258629] sd 5:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
[    1.258712] sd 5:0:0:0: [sda] Write Protect is off
[    1.258714] sd 5:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.258739] sd 5:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.259236]  sda: sda1 sda2 sda3 sda4
[    1.259597] sd 5:0:0:0: [sda] Attached SCSI disk
[    1.312376] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[    1.333679] hub 1-1:1.0: USB hub found
[    1.333899] hub 1-1:1.0: 6 ports detected
[    1.439572] usb 3-1: new high-speed USB device number 2 using ehci_hcd
[    1.563448] hub 3-1:1.0: USB hub found
[    1.563549] hub 3-1:1.0: 8 ports detected
[    1.653719] udevd[337]: starting version 184
[    1.703138] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[    1.703144] ACPI: Power Button [PWRB]
[    1.703177] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    1.703179] ACPI: Power Button [PWRF]
[    1.705923] wmi: Mapper loaded
[    1.712256] agpgart-intel 0000:00:00.0: Intel Sandybridge Chipset
[    1.712365] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[    1.713234] agpgart-intel 0000:00:00.0: detected 65536K stolen memory
[    1.713581] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000
[    1.716052] mei: module is from the staging directory, the quality is unknown, you have been warned.
[    1.716364] mei 0000:00:16.0: setting latency timer to 64
[    1.716413] mei 0000:00:16.0: irq 58 for MSI/MSI-X
[    1.718296] [drm] Initialized drm 1.1.0 20060810
[    1.723864] iTCO_vendor_support: vendor-support=0
[    1.724695] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
[    1.724781] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
[    1.724832] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    1.727125] i915 0000:00:02.0: setting latency timer to 64
[    1.727248] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    1.727374] r8169 0000:07:00.0: irq 59 for MSI/MSI-X
[    1.728073] r8169 0000:07:00.0: eth0: RTL8168evl/8111evl at 0xffffc900057c0000, c8:60:00:6e:7b:41, XID 0c900800 IRQ 59
[    1.728075] r8169 0000:07:00.0: eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    1.735541] input: PC Speaker as /devices/platform/pcspkr/input/input2
[    1.771731] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.772989] asus_wmi: ASUS WMI generic driver loaded
[    1.774223] asus_wmi: Initialization: 0x0
[    1.774237] asus_wmi: BIOS WMI version: 0.9
[    1.774262] asus_wmi: SFUN value: 0x0
[    1.774419] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input3
[    1.774861] asus_wmi: Backlight controlled by ACPI video driver
[    1.775438] mtrr: type mismatch for c0000000,10000000 old: write-back new: write-combining
[    1.775440] [drm] MTRR allocation failed.  Graphics performance may suffer.
[    1.775931] i915 0000:00:02.0: irq 60 for MSI/MSI-X
[    1.775939] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[    1.775940] [drm] Driver supports precise vblank timestamp query.
[    1.775964] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    1.809299] Refined TSC clocksource calibration: 3110.146 MHz.
[    1.809305] Switching to clocksource tsc
[    1.832753] usb 3-1.5: new low-speed USB device number 3 using ehci_hcd
[    1.928877] input: USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1.5/3-1.5:1.0/input/input4
[    1.929143] generic-usb 0003:0461:4D0F.0001: input,hidraw0: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:1d.0-1.5/input0
[    1.929154] usbcore: registered new interface driver usbhid
[    1.929155] usbhid: USB HID core driver
[    1.985997] usb 3-1.6: new low-speed USB device number 4 using ehci_hcd
[    2.072776] fbcon: inteldrmfb (fb0) is primary device
[    2.077795] input: NOVATEK USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1.6/3-1.6:1.0/input/input5
[    2.077991] generic-usb 0003:0461:0010.0002: input,hidraw1: USB HID v1.10 Keyboard [NOVATEK USB Keyboard] on usb-0000:00:1d.0-1.6/input0
[    2.083099] input: NOVATEK USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1.6/3-1.6:1.1/input/input6
[    2.083307] generic-usb 0003:0461:0010.0003: input,hidraw2: USB HID v1.10 Device [NOVATEK USB Keyboard] on usb-0000:00:1d.0-1.6/input1
[    2.149127] usb 3-1.7: new high-speed USB device number 5 using ehci_hcd
[    2.240134] Console: switching to colour frame buffer device 240x67
[    2.244317] fb0: inteldrmfb frame buffer device
[    2.244318] drm: registered panic notifier
[    2.244953] fixme: max PWM is zero.
[    2.245016] acpi device:33: registered as cooling_device4
[    2.245130] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input7
[    2.245234] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    2.245269] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[    2.245371] snd_hda_intel 0000:00:1b.0: irq 61 for MSI/MSI-X
[    2.802866] HDMI status: Codec=3 Pin=7 Presence_Detect=0 ELD_Valid=0
[    2.802922] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[    2.803051] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[    2.803159] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[    2.803236] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[    2.803306] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[    2.803379] input: HDA Intel PCH Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[    2.803449] input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[    2.803518] input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[    2.803589] input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[    2.865919] EXT4-fs (sda3): re-mounted. Opts: (null)
[    2.877013] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
[    2.883618] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem
[    2.884453] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null)
[    2.982130] Adding 265068k swap on /dev/sda2.  Priority:-1 extents:1 across:265068k SS
[    3.225858] r8169 0000:07:00.0: eth0: link down
[    3.225898] r8169 0000:07:00.0: eth0: link down
[    3.226279] ADDRCONF(NETDEV_UP): eth0: link is not ready
[    4.793410] r8169 0000:07:00.0: eth0: link up
[    4.793811] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   15.684220] EXT4-fs (sda3): re-mounted. Opts: commit=0
[   15.691443] EXT4-fs (sda4): re-mounted. Opts: commit=0
[   36.897331] fuse init (API version 7.18)
[   38.837066] gnome-shell-cal[1099] trap int3 ip:7f6a314f75e1 sp:7fff5b9dc510 error:0

is dmesg. Thanks for the reply!

Gusar

Member

Registered: 2009-08-25

Posts: 3,605

Re: Having Trouble with WiFi (Ralink RT3070)

Which kernel are you using? The thing should work with 3.4. If you're using an earlier kernel, try this:

modprobe rt2800usb
echo "1737 0078" > /sys/bus/usb/drivers/rt2800usb/new_id

UnsolvedCypher

Member

Registered: 2012-04-28

Posts: 201

Re: Having Trouble with WiFi (Ralink RT3070)

Which kernel are you using? The thing should work with 3.4. If you're using an earlier kernel, try this:

modprobe rt2800usb
echo "1737 0078" > /sys/bus/usb/drivers/rt2800usb/new_id

I'm using 3.3.7-1. Pacman says this is up to date. How do I update?
  Thanks!

Terminator

Member

From: Belgium

Registered: 2012-05-07

Posts: 265

Re: Having Trouble with WiFi (Ralink RT3070)

Which kernel are you using? The thing should work with 3.4. If you're using an earlier kernel, try this:

modprobe rt2800usb
echo "1737 0078" > /sys/bus/usb/drivers/rt2800usb/new_id

I'm using 3.3.7-1. Pacman says this is up to date. How do I update?
  Thanks!

Kernel 3.4.1-1 is in testing. It's already marked stable upstream for a few days, so it will probably be moved to the normal repositories soon.

Gusar

Member

Registered: 2009-08-25

Posts: 3,605

Re: Having Trouble with WiFi (Ralink RT3070)

What Terminator said. In the mean time, do those commands work? If not, in what way are they not?

UnsolvedCypher

Member

Registered: 2012-04-28

Posts: 201

Re: Having Trouble with WiFi (Ralink RT3070)

What Terminator said. In the mean time, do those commands work? If not, in what way are they not?

I'm away from the machine right now, but I'll get back to you as soon as I can.

UnsolvedCypher

Member

Registered: 2012-04-28

Posts: 201

Re: Having Trouble with WiFi (Ralink RT3070)

Which kernel are you using? The thing should work with 3.4. If you're using an earlier kernel, try this:

modprobe rt2800usb
echo "1737 0078" > /sys/bus/usb/drivers/rt2800usb/new_id

I tried the commands, but got:

sudo echo "1737 0078" > /sys/bus/usb/drivers/rt2800usb/new_id
bash: /sys/bus/usb/drivers/rt2800usb/new_id: Permission denied

Gusar

Member

Registered: 2009-08-25

Posts: 3,605

Re: Having Trouble with WiFi (Ralink RT3070)

There's no sudo in my post. That's for a reason.

UnsolvedCypher

Member

Registered: 2012-04-28

Posts: 201

Re: Having Trouble with WiFi (Ralink RT3070)

There's no sudo in my post. That's for a reason.

Sorry. I get the same result both with and without sudo.

Gusar

Member

Registered: 2009-08-25

Posts: 3,605

Re: Having Trouble with WiFi (Ralink RT3070)

Every time I try to not spell stuff out directly, to encourage people to figure things out on their own instead of just blindly copy-pasting commands, it backfires. I don't know why I still do it then. Must be some sort of masochism.

Examine what you've got: A regular user doesn't have permissions. Sudo doesn't work (you can google to find out why). So what remains? It's not that hard to figure out.

Last edited by Gusar (2012-06-08 23:37:09)

UnsolvedCypher

Member

Registered: 2012-04-28

Posts: 201

Re: Having Trouble with WiFi (Ralink RT3070)

Every time I try to not spell stuff out directly, to encourage people to figure things out on their own instead of just blindly copy-pasting commands, it backfires. I don't know why I still do it then. Must be some sort of masochism.

Examine what you've got: A regular user doesn't have permissions. Sudo doesn't work (you can google to find out why). So what remains? It's not that hard to figure out.

I'm sorry, but I'm a bit new to Linux. Arch is a step outside of my comfort zone. I am not really sure what you are getting at. Log in as root? Could you please be a bit more clear?
  Thanks, ~Unsolved Cypher

Gusar

Member

Registered: 2009-08-25

Posts: 3,605

Re: Having Trouble with WiFi (Ralink RT3070)

Log in as root?

Close. Not log in. But switch to root using su

UnsolvedCypher

Member

Registered: 2012-04-28

Posts: 201

Re: Having Trouble with WiFi (Ralink RT3070)

Log in as root?

Close. Not log in. But switch to root using su

Thanks. I did the commands, which seemed to work (they didn't give an error) but nothing seemed to happen. What do I do now?

Gusar

Member

Registered: 2009-08-25

Posts: 3,605

Re: Having Trouble with WiFi (Ralink RT3070)

You check with dmesg to see if the wireless card came up, then you follow the documentation on establishing wireless connections. I recommend netcfg.

UnsolvedCypher

Member

Registered: 2012-04-28

Posts: 201

Re: Having Trouble with WiFi (Ralink RT3070)

You check with dmesg to see if the wireless card came up, then you follow the documentation on establishing wireless connections. I recommend netcfg.

Sorry, but I'm not quite sure how to do this. I typed dmesg, but a lot of text came up. What am I looking for? Also, what is documentation I am looking for? The Arch Wiki? I am using Gnome Shell as a DE, which usually has the wireless icon in the corner. This is not happening, so I'm not sure what is going on. Sorry about my limited knowledge.
  Thanks, ~Unsolved Cypher

MoonSwan

Member

From: Great White North

Registered: 2008-01-23

Posts: 881

Re: Having Trouble with WiFi (Ralink RT3070)

Hi, welcome to the forum, UCypher.

Two things will make your life here easier: use the wiki and try to ask questions in a smart way.  That's all that's required of you, as a new Archer, imo. 

My suggestion:  look up Netcfg on the wiki.  You've got your wifi dongle's drivers working I gather.  You can tell dmesg to only play the last 10 or so lines with

dmesg | less

  You may or may not require that but it can make things a little less scary. 

I don't know anything about Gnome Shell so I have no advice on that.  Keep at it, you'll achieve your current goal pretty quickly I'm sure.

UnsolvedCypher

Member

Registered: 2012-04-28

Posts: 201

Re: Having Trouble with WiFi (Ralink RT3070)

Hi, welcome to the forum, UCypher.

Two things will make your life here easier: use the wiki and try to ask questions in a smart way.  That's all that's required of you, as a new Archer, imo. 

My suggestion:  look up Netcfg on the wiki.  You've got your wifi dongle's drivers working I gather.  You can tell dmesg to only play the last 10 or so lines with

dmesg | less

  You may or may not require that but it can make things a little less scary. 

I don't know anything about Gnome Shell so I have no advice on that.  Keep at it, you'll achieve your current goal pretty quickly I'm sure.

Thank you for the suggestions. netcfg looks pretty complicated, I'm just trying to get my desktop environment to recognize the WiFi, and it isn't. The only reason I'm trying not to get into anything difficult is because without WiFi, I need to be plugged into the router, which makes my position very uncomfortable. Is there a simple way to get my driver to work with the rest of the OS?
  Thanks! ~Unsolved Cypher

Bazzaah

Member

Registered: 2010-03-15

Posts: 69

Re: Having Trouble with WiFi (Ralink RT3070)

which module does RT3070 use?

If it's rt2800usb, have a look at this thread and see if you feel like compiling the Ralink drivers.

https://bbs.archlinux.org/viewtopic.php?id=129261

UnsolvedCypher

Member

Registered: 2012-04-28

Posts: 201

Re: Having Trouble with WiFi (Ralink RT3070)

which module does RT3070 use?

If it's rt2800usb, have a look at this thread and see if you feel like compiling the Ralink drivers.

https://bbs.archlinux.org/viewtopic.php?id=129261

I think I will just try compiling kernel 3.4 and see if that works. Will this interfere with future kernel updates?

Terminator

Member

From: Belgium

Registered: 2012-05-07

Posts: 265

Re: Having Trouble with WiFi (Ralink RT3070)

I assume you could also enable the testing repositories and only install the kernel from it. Probably you could do that by uncommenting testing but putting it under core (so that when updating, your software isn't replaced by the newer versions of testing) and then running 'pacman -S testing/linux'. I'm not sure though, I keep away from testing.

UnsolvedCypher

Member

Registered: 2012-04-28

Posts: 201

Re: Having Trouble with WiFi (Ralink RT3070)

I assume you could also enable the testing repositories and only install the kernel from it. Probably you could do that by uncommenting testing but putting it under core (so that when updating, your software isn't replaced by the newer versions of testing) and then running 'pacman -S testing/linux'. I'm not sure though, I keep away from testing.

This sounds like a great idea. I'll try it out and let you know how it goes.

Bazzaah

Member

Registered: 2010-03-15

Posts: 69

Re: Having Trouble with WiFi (Ralink RT3070)

which module does RT3070 use?

If it's rt2800usb, have a look at this thread and see if you feel like compiling the Ralink drivers.

https://bbs.archlinux.org/viewtopic.php?id=129261

I think I will just try compiling kernel 3.4 and see if that works. Will this interfere with future kernel updates?

Not at all. You'd just need to recompile the drivers and load the module after each kernel update.

I would say that the rt2800usb module seems to cause a lot of problems and you may well be on a hiding to nothing. I quit trying to get it to play with my hardware. The Ralink drivers work really well and shouldn't take you more than a few minutes to compile for yourself.

Last edited by Bazzaah (2012-06-09 14:17:16)

UnsolvedCypher

Member

Registered: 2012-04-28

Posts: 201

Re: Having Trouble with WiFi (Ralink RT3070)

I assume you could also enable the testing repositories and only install the kernel from it. Probably you could do that by uncommenting testing but putting it under core (so that when updating, your software isn't replaced by the newer versions of testing) and then running 'pacman -S testing/linux'. I'm not sure though, I keep away from testing.

I just tried this, and the install succeeded. I am not sure whether I booted into the kernel, though, or even if grub recognizes it. Is there a way to check this?
  Thanks, ~Unsolved Cypher