You are not logged in.

#1 2012-07-28 13:55:42

sweetthdevil
Member
Registered: 2009-10-20
Posts: 432

Slow GDM - different issues than other posts

Hi all,

GDM is slow to start (compare to what it use to be) the issue is I can't pin point why, as I have made a lot of updates lately including moving to Grub2 and changing quite a few .pacnew today (I know I should do it right away...)

I seems however to be an issue with the nvidia driver (see below xorg.0.log for more information)

FYI I run dual screen with twinview

Many thanks for your assistance,

Regards,

[    11.851] 
X.Org X Server 1.12.3
Release Date: 2012-07-09
[    11.851] X Protocol Version 11, Revision 0
[    11.851] Build Operating System: Linux 3.4.4-3-ARCH i686 
[    11.851] Current Operating System: Linux (none) 3.4.6-1-ARCH #1 SMP PREEMPT Fri Jul 20 07:24:45 UTC 2012 i686
[    11.851] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=f4a7ed0a-8a4a-4e43-8b57-4ccddec8f31e ro quiet
[    11.851] Build Date: 09 July 2012  04:03:16PM
[    11.851]  
[    11.851] Current version of pixman: 0.26.2
[    11.851] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[    11.851] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    11.851] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Jul 28 14:50:20 2012
[    11.908] (==) Using config file: "/etc/X11/xorg.conf"
[    11.908] (==) Using config directory: "/etc/X11/xorg.conf.d"
[    11.940] (==) ServerLayout "Layout0"
[    11.940] (**) |-->Screen "Screen0" (0)
[    11.940] (**) |   |-->Monitor "Monitor0"
[    11.959] (**) |   |-->Device "Device0"
[    11.959] (**) |-->Input Device "Keyboard0"
[    11.959] (**) |-->Input Device "Mouse0"
[    11.959] (**) Option "BlankTime" "0"
[    11.959] (**) Option "StandbyTime" "0"
[    11.959] (**) Option "SuspendTime" "0"
[    11.959] (**) Option "OffTime" "0"
[    11.959] (**) Option "Xinerama" "0"
[    11.959] (==) Automatically adding devices
[    11.959] (==) Automatically enabling devices
[    12.050] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[    12.050] 	Entry deleted from font path.
[    12.161] (==) FontPath set to:
	/usr/share/fonts/misc/,
	/usr/share/fonts/TTF/,
	/usr/share/fonts/Type1/,
	/usr/share/fonts/100dpi/,
	/usr/share/fonts/75dpi/
[    12.161] (==) ModulePath set to "/usr/lib/xorg/modules"
[    12.161] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[    12.161] (WW) Disabling Mouse0
[    12.161] (II) Loader magic: 0x82235a0
[    12.161] (II) Module ABI versions:
[    12.161] 	X.Org ANSI C Emulation: 0.4
[    12.161] 	X.Org Video Driver: 12.0
[    12.161] 	X.Org XInput driver : 16.0
[    12.161] 	X.Org Server Extension : 6.0
[    12.162] (--) PCI:*(0:1:0:0) 10de:1245:196e:085a rev 161, Mem @ 0xfc000000/33554432, 0xd8000000/134217728, 0xd4000000/67108864, I/O @ 0x0000bc00/128, BIOS @ 0x????????/524288
[    12.162] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[    12.162] (II) LoadModule: "extmod"
[    12.253] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[    12.302] (II) Module extmod: vendor="X.Org Foundation"
[    12.302] 	compiled for 1.12.3, module version = 1.0.0
[    12.302] 	Module class: X.Org Server Extension
[    12.302] 	ABI class: X.Org Server Extension, version 6.0
[    12.302] (II) Loading extension MIT-SCREEN-SAVER
[    12.302] (II) Loading extension XFree86-VidModeExtension
[    12.302] (II) Loading extension XFree86-DGA
[    12.312] (II) Loading extension DPMS
[    12.312] (II) Loading extension XVideo
[    12.312] (II) Loading extension XVideo-MotionCompensation
[    12.312] (II) Loading extension X-Resource
[    12.312] (II) LoadModule: "dbe"
[    12.312] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[    12.328] (II) Module dbe: vendor="X.Org Foundation"
[    12.329] 	compiled for 1.12.3, module version = 1.0.0
[    12.329] 	Module class: X.Org Server Extension
[    12.329] 	ABI class: X.Org Server Extension, version 6.0
[    12.329] (II) Loading extension DOUBLE-BUFFER
[    12.329] (II) LoadModule: "glx"
[    12.329] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    13.332] (II) Module glx: vendor="NVIDIA Corporation"
[    13.332] 	compiled for 4.0.2, module version = 1.0.0
[    13.332] 	Module class: X.Org Server Extension
[    13.332] (II) NVIDIA GLX Module  302.17  Tue Jun 12 18:58:55 PDT 2012
[    13.332] (II) Loading extension GLX
[    13.332] (II) LoadModule: "record"
[    13.332] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[    13.347] (II) Module record: vendor="X.Org Foundation"
[    13.347] 	compiled for 1.12.3, module version = 1.13.0
[    13.347] 	Module class: X.Org Server Extension
[    13.347] 	ABI class: X.Org Server Extension, version 6.0
[    13.347] (II) Loading extension RECORD
[    13.347] (II) LoadModule: "dri"
[    13.347] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[    13.364] (II) Module dri: vendor="X.Org Foundation"
[    13.364] 	compiled for 1.12.3, module version = 1.0.0
[    13.364] 	ABI class: X.Org Server Extension, version 6.0
[    13.364] (II) Loading extension XFree86-DRI
[    13.364] (II) LoadModule: "dri2"
[    13.364] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[    13.364] (II) Module dri2: vendor="X.Org Foundation"
[    13.364] 	compiled for 1.12.3, module version = 1.2.0
[    13.364] 	ABI class: X.Org Server Extension, version 6.0
[    13.364] (II) Loading extension DRI2
[    13.364] (II) LoadModule: "nvidia"
[    13.383] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[    13.456] (II) Module nvidia: vendor="NVIDIA Corporation"
[    13.456] 	compiled for 4.0.2, module version = 1.0.0
[    13.456] 	Module class: X.Org Video Driver
[    13.480] (II) LoadModule: "evdev"
[    13.480] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    13.501] (II) Module evdev: vendor="X.Org Foundation"
[    13.501] 	compiled for 1.12.3, module version = 2.7.1
[    13.501] 	Module class: X.Org XInput Driver
[    13.501] 	ABI class: X.Org XInput driver, version 16.0
[    13.508] (II) NVIDIA dlloader X Driver  302.17  Tue Jun 12 18:39:24 PDT 2012
[    13.508] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[    13.509] (++) using VT number 7

[    13.529] (II) Loading sub module "fb"
[    13.529] (II) LoadModule: "fb"
[    13.529] (II) Loading /usr/lib/xorg/modules/libfb.so
[    13.548] (II) Module fb: vendor="X.Org Foundation"
[    13.548] 	compiled for 1.12.3, module version = 1.0.0
[    13.548] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    13.548] (II) Loading sub module "wfb"
[    13.548] (II) LoadModule: "wfb"
[    13.548] (II) Loading /usr/lib/xorg/modules/libwfb.so
[    13.596] (II) Module wfb: vendor="X.Org Foundation"
[    13.596] 	compiled for 1.12.3, module version = 1.0.0
[    13.596] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    13.597] (II) Loading sub module "ramdac"
[    13.597] (II) LoadModule: "ramdac"
[    13.597] (II) Module "ramdac" already built-in
[    13.626] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[    13.626] (==) NVIDIA(0): RGB weight 888
[    13.626] (==) NVIDIA(0): Default visual is TrueColor
[    13.626] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[    13.626] (**) NVIDIA(0): Option "NoLogo" "true"
[    13.626] (**) NVIDIA(0): Option "RenderAccel" "true"
[    13.626] (**) NVIDIA(0): Option "TwinViewXineramaInfoOrder" "CRT-1"
[    13.627] (**) NVIDIA(0): Enabling RENDER acceleration
[    13.627] (**) NVIDIA(0): Option "MetaModes" "CRT-0: nvidia-auto-select +1440+0, CRT-1: nvidia-auto-select +0+82"
[    13.627] (**) NVIDIA(0): Enabling 2D acceleration
[    14.712] (II) NVIDIA(GPU-0): Display (ViewSonic VA902 (CRT-0)) does not support NVIDIA 3D
[    14.712] (II) NVIDIA(GPU-0):     Vision stereo.
[    14.718] (II) NVIDIA(GPU-0): Display (AOC  N19W (CRT-1)) does not support NVIDIA 3D Vision
[    14.718] (II) NVIDIA(GPU-0):     stereo.
[    14.720] (II) NVIDIA(0): NVIDIA GPU GeForce GTS 450 (GF116) at PCI:1:0:0 (GPU-0)
[    14.720] (--) NVIDIA(0): Memory: 1048576 kBytes
[    14.720] (--) NVIDIA(0): VideoBIOS: 70.26.3e.00.10
[    14.720] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[    14.720] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
[    14.723] (--) NVIDIA(0): Valid display device(s) on GeForce GTS 450 at PCI:1:0:0
[    14.723] (--) NVIDIA(0):     ViewSonic VA902 (CRT-0) (connected)
[    14.723] (--) NVIDIA(0):     AOC  N19W (CRT-1) (connected)
[    14.723] (--) NVIDIA(0):     DFP-0
[    14.723] (--) NVIDIA(0):     DFP-1
[    14.723] (--) NVIDIA(0):     DFP-2
[    14.723] (--) NVIDIA(0): ViewSonic VA902 (CRT-0): 400.0 MHz maximum pixel clock
[    14.723] (--) NVIDIA(0): AOC  N19W (CRT-1): 400.0 MHz maximum pixel clock
[    14.723] (--) NVIDIA(0): DFP-0: 330.0 MHz maximum pixel clock
[    14.723] (--) NVIDIA(0): DFP-0: Internal Single Link TMDS
[    14.723] (--) NVIDIA(0): DFP-1: 165.0 MHz maximum pixel clock
[    14.723] (--) NVIDIA(0): DFP-1: Internal Single Link TMDS
[    14.723] (--) NVIDIA(0): DFP-2: 330.0 MHz maximum pixel clock
[    14.723] (--) NVIDIA(0): DFP-2: Internal Single Link TMDS
[    14.723] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[    14.723] (**) NVIDIA(0):     device ViewSonic VA902 (CRT-0) (Using EDID frequencies has
[    14.723] (**) NVIDIA(0):     been enabled on all display devices.)
[    14.732] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[    14.733] (**) NVIDIA(0):     device AOC  N19W (CRT-1) (Using EDID frequencies has been
[    14.733] (**) NVIDIA(0):     enabled on all display devices.)
[    14.740] (II) NVIDIA(0): Validated modes:
[    14.740] (II) NVIDIA(0):    
[    14.740] (II) NVIDIA(0):     "CRT-0:nvidia-auto-select+1440+0,CRT-1:nvidia-auto-select+0+82"
[    14.740] (II) NVIDIA(0): Virtual screen size determined to be 2720 x 1024
[    14.762] (--) NVIDIA(0): DPI set to (85, 86); computed from "UseEdidDpi" X config
[    14.762] (--) NVIDIA(0):     option
[    14.763] (--) Depth 24 pixmap format is 32 bpp
[    14.763] (II) NVIDIA: Using 1024.00 MB of virtual memory for indirect memory
[    14.763] (II) NVIDIA:     access.
[    14.766] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[    14.766] (II) NVIDIA(0):     may not be running or the "AcpidSocketPath" X
[    14.766] (II) NVIDIA(0):     configuration option may not be set correctly.  When the
[    14.766] (II) NVIDIA(0):     ACPI event daemon is available, the NVIDIA X driver will
[    14.766] (II) NVIDIA(0):     try to use it to receive ACPI event notifications.  For
[    14.766] (II) NVIDIA(0):     details, please see the "ConnectToAcpid" and
[    14.766] (II) NVIDIA(0):     "AcpidSocketPath" X configuration options in Appendix B: X
[    14.766] (II) NVIDIA(0):     Config Options in the README.
[    14.769] (II) NVIDIA(0): Setting mode "CRT-0:nvidia-auto-select+1440+0,CRT-1:nvidia-auto-select+0+82"
[    14.841] (II) Loading extension NV-GLX
[    14.968] (==) NVIDIA(0): Disabling shared memory pixmaps
[    14.968] (==) NVIDIA(0): Backing store disabled
[    14.968] (==) NVIDIA(0): Silken mouse enabled
[    14.968] (**) NVIDIA(0): DPMS enabled
[    14.968] (II) Loading extension NV-CONTROL
[    14.968] (II) Loading extension XINERAMA
[    14.968] (WW) NVIDIA(0): Option "AGPFastWrite" is not used
[    14.968] (WW) NVIDIA(0): Option "EnablePageFlip" is not used
[    14.968] (WW) NVIDIA(0): Option "TwinView" is not used
[    14.968] (II) Loading sub module "dri2"
[    14.968] (II) LoadModule: "dri2"
[    14.968] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[    14.968] (II) Module dri2: vendor="X.Org Foundation"
[    14.968] 	compiled for 1.12.3, module version = 1.2.0
[    14.968] 	ABI class: X.Org Server Extension, version 6.0
[    14.968] (II) NVIDIA(0): [DRI2] Setup complete
[    14.968] (II) NVIDIA(0): [DRI2]   VDPAU driver: nvidia
[    14.969] (--) RandR disabled
[    14.969] (II) Initializing built-in extension Generic Event Extension
[    14.969] (II) Initializing built-in extension SHAPE
[    14.969] (II) Initializing built-in extension MIT-SHM
[    14.969] (II) Initializing built-in extension XInputExtension
[    14.969] (II) Initializing built-in extension XTEST
[    14.969] (II) Initializing built-in extension BIG-REQUESTS
[    14.969] (II) Initializing built-in extension SYNC
[    14.969] (II) Initializing built-in extension XKEYBOARD
[    14.969] (II) Initializing built-in extension XC-MISC
[    14.969] (II) Initializing built-in extension SECURITY
[    14.969] (II) Initializing built-in extension XINERAMA
[    14.969] (II) Initializing built-in extension XFIXES
[    14.969] (II) Initializing built-in extension RENDER
[    14.969] (II) Initializing built-in extension RANDR
[    14.969] (II) Initializing built-in extension COMPOSITE
[    14.969] (II) Initializing built-in extension DAMAGE
[    14.971] (II) Initializing extension GLX
[    15.344] (II) Using input driver 'evdev' for 'Keyboard0'
[    15.344] (**) Option "CoreKeyboard"
[    15.344] (**) Keyboard0: always reports core events
[    15.344] (EE) evdev: Keyboard0: No device specified.
[    15.344] (EE) PreInit returned 2 for "Keyboard0"
[    15.344] (II) UnloadModule: "evdev"
[    15.346] (II) config/udev: Adding input device Power Button (/dev/input/event6)
[    15.346] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    15.346] (II) Using input driver 'evdev' for 'Power Button'
[    15.346] (**) Power Button: always reports core events
[    15.346] (**) evdev: Power Button: Device: "/dev/input/event6"
[    15.346] (--) evdev: Power Button: Vendor 0 Product 0x1
[    15.346] (--) evdev: Power Button: Found keys
[    15.346] (II) evdev: Power Button: Configuring as keyboard
[    15.346] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input6/event6"
[    15.346] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    15.346] (**) Option "xkb_rules" "evdev"
[    15.346] (**) Option "xkb_model" "evdev"
[    15.346] (**) Option "xkb_layout" "us"
[    15.366] (II) config/udev: Adding input device Power Button (/dev/input/event5)
[    15.366] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    15.366] (II) Using input driver 'evdev' for 'Power Button'
[    15.366] (**) Power Button: always reports core events
[    15.366] (**) evdev: Power Button: Device: "/dev/input/event5"
[    15.366] (--) evdev: Power Button: Vendor 0 Product 0x1
[    15.366] (--) evdev: Power Button: Found keys
[    15.366] (II) evdev: Power Button: Configuring as keyboard
[    15.366] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input5/event5"
[    15.366] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[    15.366] (**) Option "xkb_rules" "evdev"
[    15.366] (**) Option "xkb_model" "evdev"
[    15.366] (**) Option "xkb_layout" "us"
[    15.366] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event14)
[    15.366] (II) No input driver specified, ignoring this device.
[    15.366] (II) This device may have been added with another device file.
[    15.367] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event15)
[    15.367] (II) No input driver specified, ignoring this device.
[    15.367] (II) This device may have been added with another device file.
[    15.367] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event16)
[    15.367] (II) No input driver specified, ignoring this device.
[    15.367] (II) This device may have been added with another device file.
[    15.367] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event17)
[    15.367] (II) No input driver specified, ignoring this device.
[    15.367] (II) This device may have been added with another device file.
[    15.367] (II) config/udev: Adding input device UVC Camera (046d:0809) (/dev/input/event13)
[    15.367] (**) UVC Camera (046d:0809): Applying InputClass "evdev keyboard catchall"
[    15.367] (II) Using input driver 'evdev' for 'UVC Camera (046d:0809)'
[    15.367] (**) UVC Camera (046d:0809): always reports core events
[    15.367] (**) evdev: UVC Camera (046d:0809): Device: "/dev/input/event13"
[    15.367] (--) evdev: UVC Camera (046d:0809): Vendor 0x46d Product 0x809
[    15.367] (--) evdev: UVC Camera (046d:0809): Found keys
[    15.367] (II) evdev: UVC Camera (046d:0809): Configuring as keyboard
[    15.367] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.7/usb1/1-5/1-5:1.0/input/input13/event13"
[    15.367] (II) XINPUT: Adding extended input device "UVC Camera (046d:0809)" (type: KEYBOARD, id 8)
[    15.367] (**) Option "xkb_rules" "evdev"
[    15.367] (**) Option "xkb_model" "evdev"
[    15.367] (**) Option "xkb_layout" "us"
[    15.368] (II) config/udev: Adding input device HDA Intel Line Out CLFE (/dev/input/event10)
[    15.368] (II) No input driver specified, ignoring this device.
[    15.368] (II) This device may have been added with another device file.
[    15.368] (II) config/udev: Adding input device HDA Intel Line Out Surround (/dev/input/event11)
[    15.368] (II) No input driver specified, ignoring this device.
[    15.368] (II) This device may have been added with another device file.
[    15.368] (II) config/udev: Adding input device HDA Intel Line Out Front (/dev/input/event12)
[    15.368] (II) No input driver specified, ignoring this device.
[    15.368] (II) This device may have been added with another device file.
[    15.368] (II) config/udev: Adding input device HDA Intel Line (/dev/input/event7)
[    15.368] (II) No input driver specified, ignoring this device.
[    15.368] (II) This device may have been added with another device file.
[    15.369] (II) config/udev: Adding input device HDA Intel Rear Mic (/dev/input/event8)
[    15.369] (II) No input driver specified, ignoring this device.
[    15.369] (II) This device may have been added with another device file.
[    15.369] (II) config/udev: Adding input device HDA Intel Line Out Side (/dev/input/event9)
[    15.369] (II) No input driver specified, ignoring this device.
[    15.369] (II) This device may have been added with another device file.
[    15.369] (II) config/udev: Adding input device Logitech G500 (/dev/input/event0)
[    15.369] (**) Logitech G500: Applying InputClass "evdev pointer catchall"
[    15.369] (II) Using input driver 'evdev' for 'Logitech G500'
[    15.369] (**) Logitech G500: always reports core events
[    15.369] (**) evdev: Logitech G500: Device: "/dev/input/event0"
[    15.369] (--) evdev: Logitech G500: Vendor 0x46d Product 0xc068
[    15.369] (--) evdev: Logitech G500: Found 20 mouse buttons
[    15.369] (--) evdev: Logitech G500: Found scroll wheel(s)
[    15.369] (--) evdev: Logitech G500: Found relative axes
[    15.369] (--) evdev: Logitech G500: Found x and y relative axes
[    15.369] (II) evdev: Logitech G500: Configuring as mouse
[    15.369] (II) evdev: Logitech G500: Adding scrollwheel support
[    15.369] (**) evdev: Logitech G500: YAxisMapping: buttons 4 and 5
[    15.369] (**) evdev: Logitech G500: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    15.369] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.1/usb7/7-1/7-1:1.0/input/input0/event0"
[    15.369] (II) XINPUT: Adding extended input device "Logitech G500" (type: MOUSE, id 9)
[    15.369] (II) evdev: Logitech G500: initialized for relative axes.
[    15.369] (**) Logitech G500: (accel) keeping acceleration scheme 1
[    15.369] (**) Logitech G500: (accel) acceleration profile 0
[    15.370] (**) Logitech G500: (accel) acceleration factor: 2.000
[    15.370] (**) Logitech G500: (accel) acceleration threshold: 4
[    15.370] (II) config/udev: Adding input device Logitech G500 (/dev/input/mouse0)
[    15.370] (II) No input driver specified, ignoring this device.
[    15.370] (II) This device may have been added with another device file.
[    15.370] (II) config/udev: Adding input device Logitech G500 (/dev/input/event1)
[    15.370] (**) Logitech G500: Applying InputClass "evdev keyboard catchall"
[    15.370] (II) Using input driver 'evdev' for 'Logitech G500'
[    15.370] (**) Logitech G500: always reports core events
[    15.370] (**) evdev: Logitech G500: Device: "/dev/input/event1"
[    15.370] (--) evdev: Logitech G500: Vendor 0x46d Product 0xc068
[    15.370] (--) evdev: Logitech G500: Found 1 mouse buttons
[    15.370] (--) evdev: Logitech G500: Found scroll wheel(s)
[    15.370] (--) evdev: Logitech G500: Found relative axes
[    15.370] (II) evdev: Logitech G500: Forcing relative x/y axes to exist.
[    15.370] (--) evdev: Logitech G500: Found absolute axes
[    15.370] (II) evdev: Logitech G500: Forcing absolute x/y axes to exist.
[    15.370] (--) evdev: Logitech G500: Found keys
[    15.370] (II) evdev: Logitech G500: Configuring as mouse
[    15.370] (II) evdev: Logitech G500: Configuring as keyboard
[    15.370] (II) evdev: Logitech G500: Adding scrollwheel support
[    15.370] (**) evdev: Logitech G500: YAxisMapping: buttons 4 and 5
[    15.370] (**) evdev: Logitech G500: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    15.370] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.1/usb7/7-1/7-1:1.1/input/input1/event1"
[    15.370] (II) XINPUT: Adding extended input device "Logitech G500" (type: KEYBOARD, id 10)
[    15.370] (**) Option "xkb_rules" "evdev"
[    15.370] (**) Option "xkb_model" "evdev"
[    15.370] (**) Option "xkb_layout" "us"
[    15.370] (II) evdev: Logitech G500: initialized for relative axes.
[    15.370] (WW) evdev: Logitech G500: ignoring absolute axes.
[    15.371] (**) Logitech G500: (accel) keeping acceleration scheme 1
[    15.371] (**) Logitech G500: (accel) acceleration profile 0
[    15.371] (**) Logitech G500: (accel) acceleration factor: 2.000
[    15.371] (**) Logitech G500: (accel) acceleration threshold: 4
[    15.371] (II) config/udev: Adding input device Logitech USB Multimedia Keyboard (/dev/input/event2)
[    15.371] (**) Logitech USB Multimedia Keyboard: Applying InputClass "evdev keyboard catchall"
[    15.371] (II) Using input driver 'evdev' for 'Logitech USB Multimedia Keyboard'
[    15.371] (**) Logitech USB Multimedia Keyboard: always reports core events
[    15.371] (**) evdev: Logitech USB Multimedia Keyboard: Device: "/dev/input/event2"
[    15.371] (--) evdev: Logitech USB Multimedia Keyboard: Vendor 0x46d Product 0xc317
[    15.371] (--) evdev: Logitech USB Multimedia Keyboard: Found keys
[    15.371] (II) evdev: Logitech USB Multimedia Keyboard: Configuring as keyboard
[    15.371] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.1/usb7/7-2/7-2:1.0/input/input2/event2"
[    15.371] (II) XINPUT: Adding extended input device "Logitech USB Multimedia Keyboard" (type: KEYBOARD, id 11)
[    15.371] (**) Option "xkb_rules" "evdev"
[    15.371] (**) Option "xkb_model" "evdev"
[    15.371] (**) Option "xkb_layout" "us"
[    15.371] (II) config/udev: Adding input device Logitech USB Multimedia Keyboard (/dev/input/event3)
[    15.371] (**) Logitech USB Multimedia Keyboard: Applying InputClass "evdev keyboard catchall"
[    15.371] (II) Using input driver 'evdev' for 'Logitech USB Multimedia Keyboard'
[    15.372] (**) Logitech USB Multimedia Keyboard: always reports core events
[    15.372] (**) evdev: Logitech USB Multimedia Keyboard: Device: "/dev/input/event3"
[    15.372] (--) evdev: Logitech USB Multimedia Keyboard: Vendor 0x46d Product 0xc317
[    15.372] (--) evdev: Logitech USB Multimedia Keyboard: Found keys
[    15.372] (II) evdev: Logitech USB Multimedia Keyboard: Configuring as keyboard
[    15.372] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.1/usb7/7-2/7-2:1.1/input/input3/event3"
[    15.372] (II) XINPUT: Adding extended input device "Logitech USB Multimedia Keyboard" (type: KEYBOARD, id 12)
[    15.372] (**) Option "xkb_rules" "evdev"
[    15.372] (**) Option "xkb_model" "evdev"
[    15.372] (**) Option "xkb_layout" "us"
[    15.372] (II) config/udev: Adding input device PC Speaker (/dev/input/event4)
[    15.372] (II) No input driver specified, ignoring this device.
[    15.372] (II) This device may have been added with another device file.
[    15.462] (II) NVIDIA(GPU-0): Display (ViewSonic VA902 (CRT-0)) does not support NVIDIA 3D
[    15.462] (II) NVIDIA(GPU-0):     Vision stereo.
[    15.462] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[    15.462] (**) NVIDIA(0):     device ViewSonic VA902 (CRT-0) (Using EDID frequencies has
[    15.462] (**) NVIDIA(0):     been enabled on all display devices.)
[    15.477] (II) NVIDIA(GPU-0): Display (AOC  N19W (CRT-1)) does not support NVIDIA 3D Vision
[    15.477] (II) NVIDIA(GPU-0):     stereo.
[    15.477] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[    15.477] (**) NVIDIA(0):     device AOC  N19W (CRT-1) (Using EDID frequencies has been
[    15.477] (**) NVIDIA(0):     enabled on all display devices.)
[    27.188] (II) NVIDIA(GPU-0): Display (ViewSonic VA902 (CRT-0)) does not support NVIDIA 3D
[    27.188] (II) NVIDIA(GPU-0):     Vision stereo.
[    27.188] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[    27.188] (**) NVIDIA(0):     device ViewSonic VA902 (CRT-0) (Using EDID frequencies has
[    27.188] (**) NVIDIA(0):     been enabled on all display devices.)
[    27.203] (II) NVIDIA(GPU-0): Display (AOC  N19W (CRT-1)) does not support NVIDIA 3D Vision
[    27.203] (II) NVIDIA(GPU-0):     stereo.
[    27.203] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[    27.203] (**) NVIDIA(0):     device AOC  N19W (CRT-1) (Using EDID frequencies has been
[    27.203] (**) NVIDIA(0):     enabled on all display devices.)
[    50.273] (II) NVIDIA(GPU-0): Display (ViewSonic VA902 (CRT-0)) does not support NVIDIA 3D
[    50.273] (II) NVIDIA(GPU-0):     Vision stereo.
[    50.273] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[    50.273] (**) NVIDIA(0):     device ViewSonic VA902 (CRT-0) (Using EDID frequencies has
[    50.273] (**) NVIDIA(0):     been enabled on all display devices.)
[    50.289] (II) NVIDIA(GPU-0): Display (AOC  N19W (CRT-1)) does not support NVIDIA 3D Vision
[    50.289] (II) NVIDIA(GPU-0):     stereo.
[    50.289] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[    50.289] (**) NVIDIA(0):     device AOC  N19W (CRT-1) (Using EDID frequencies has been
[    50.289] (**) NVIDIA(0):     enabled on all display devices.)
[    57.536] (II) NVIDIA(GPU-0): Display (ViewSonic VA902 (CRT-0)) does not support NVIDIA 3D
[    57.536] (II) NVIDIA(GPU-0):     Vision stereo.
[    57.536] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[    57.536] (**) NVIDIA(0):     device ViewSonic VA902 (CRT-0) (Using EDID frequencies has
[    57.536] (**) NVIDIA(0):     been enabled on all display devices.)
[    57.552] (II) NVIDIA(GPU-0): Display (AOC  N19W (CRT-1)) does not support NVIDIA 3D Vision
[    57.552] (II) NVIDIA(GPU-0):     stereo.
[    57.552] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[    57.552] (**) NVIDIA(0):     device AOC  N19W (CRT-1) (Using EDID frequencies has been
[    57.552] (**) NVIDIA(0):     enabled on all display devices.)

Last edited by sweetthdevil (2012-07-28 13:56:48)

Offline

#2 2012-07-28 21:40:34

Jasa
Banned
Registered: 2011-08-05
Posts: 41

Re: Slow GDM - different issues than other posts

Have you checked your dmesg that it does not claim about framebuffer output being in use and being potential stability issue, what goes for grub2 default configuration in /etc/default/grub has line for GFXPAYLOAD that should be set from keep to text.

Offline

#3 2012-07-29 00:45:58

sweetthdevil
Member
Registered: 2009-10-20
Posts: 432

Re: Slow GDM - different issues than other posts

that shouldn't have anything to do with Gurb2 anyway, has grub simply launch the kernel?

Offline

#4 2012-07-29 09:35:34

Jasa
Banned
Registered: 2011-08-05
Posts: 41

Re: Slow GDM - different issues than other posts

No it should be Nvidia issue itself that can be caused by things like grub2 and using old style vga=*** or the forced resolution in new config, if i recall right i got system to freeze itself once or twice without bothering to fully wait it go over and i came across the text by checking dmesg output.
Atleast if your system does freeze the cause for it would be simple to be checked.

EDIT: Was going to reply with thing to ignore that as it's not your issue, but perhaps that you are using laptop with slow harddrive and some meaningless things should be taken away from loading at all.
(Writing/fixing took time and got logged out from forum session here and could not post longer reply as it's gone now.)

Last edited by Jasa (2012-07-29 11:56:20)

Offline

#5 2012-07-29 10:07:14

sweetthdevil
Member
Registered: 2009-10-20
Posts: 432

Re: Slow GDM - different issues than other posts

Right so the line in /etc/default/grub shouldn't like that?
GRUB_GFXPAYLOAD_LINUX=keep

and see below the dmesg output, I couldn't see anything wrong

Many thanks for your assistance

[    0.208614] system 00:01: [mem 0xfed14000-0xfed19fff] has been reserved
[    0.208617] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.208642] pnp 00:02: [dma 4]
[    0.208644] pnp 00:02: [io  0x0000-0x000f]
[    0.208645] pnp 00:02: [io  0x0081-0x0083]
[    0.208647] pnp 00:02: [io  0x0087]
[    0.208648] pnp 00:02: [io  0x0089-0x008b]
[    0.208649] pnp 00:02: [io  0x008f]
[    0.208651] pnp 00:02: [io  0x00c0-0x00df]
[    0.208671] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.208679] pnp 00:03: [io  0x0070-0x0071]
[    0.208686] pnp 00:03: [irq 8]
[    0.208706] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.208712] pnp 00:04: [io  0x0061]
[    0.208733] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
[    0.208741] pnp 00:05: [io  0x00f0-0x00ff]
[    0.208746] pnp 00:05: [irq 13]
[    0.208766] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.208816] pnp 00:06: [io  0x0000-0xffffffff disabled]
[    0.208818] pnp 00:06: [io  0x0000-0xffffffff disabled]
[    0.208820] pnp 00:06: [io  0x0290-0x029f]
[    0.208856] system 00:06: [io  0x0290-0x029f] has been reserved
[    0.208858] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.208937] pnp 00:07: [io  0x0010-0x001f]
[    0.208939] pnp 00:07: [io  0x0022-0x003f]
[    0.208940] pnp 00:07: [io  0x0044-0x004d]
[    0.208942] pnp 00:07: [io  0x0050-0x005f]
[    0.208943] pnp 00:07: [io  0x0062-0x0063]
[    0.208945] pnp 00:07: [io  0x0065-0x006f]
[    0.208946] pnp 00:07: [io  0x0072-0x007f]
[    0.208948] pnp 00:07: [io  0x0080]
[    0.208949] pnp 00:07: [io  0x0084-0x0086]
[    0.208951] pnp 00:07: [io  0x0088]
[    0.208952] pnp 00:07: [io  0x008c-0x008e]
[    0.208954] pnp 00:07: [io  0x0090-0x009f]
[    0.208955] pnp 00:07: [io  0x00a2-0x00bf]
[    0.208957] pnp 00:07: [io  0x00e0-0x00ef]
[    0.208960] pnp 00:07: [io  0x04d0-0x04d1]
[    0.208961] pnp 00:07: [io  0x0800-0x087f]
[    0.208963] pnp 00:07: [io  0x0400-0x03ff disabled]
[    0.208964] pnp 00:07: [io  0x0500-0x057f]
[    0.208966] pnp 00:07: [mem 0xfed08000-0xfed08fff]
[    0.208968] pnp 00:07: [mem 0xfed1c000-0xfed1ffff]
[    0.208969] pnp 00:07: [mem 0xfed20000-0xfed3ffff]
[    0.208971] pnp 00:07: [mem 0xfed50000-0xfed8ffff]
[    0.209028] system 00:07: [io  0x04d0-0x04d1] has been reserved
[    0.209030] system 00:07: [io  0x0800-0x087f] has been reserved
[    0.209032] system 00:07: [io  0x0500-0x057f] has been reserved
[    0.209034] system 00:07: [mem 0xfed08000-0xfed08fff] has been reserved
[    0.209037] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.209039] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.209041] system 00:07: [mem 0xfed50000-0xfed8ffff] has been reserved
[    0.209043] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.209094] pnp 00:08: [mem 0xfed00000-0xfed003ff]
[    0.209116] pnp 00:08: Plug and Play ACPI device, IDs PNP0103 (active)
[    0.209154] pnp 00:09: [mem 0xffb00000-0xffbfffff]
[    0.209156] pnp 00:09: [mem 0xfff00000-0xffffffff]
[    0.209179] pnp 00:09: Plug and Play ACPI device, IDs INT0800 (active)
[    0.209211] pnp 00:0a: [mem 0xffc00000-0xffefffff]
[    0.209247] system 00:0a: [mem 0xffc00000-0xffefffff] has been reserved
[    0.209250] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.209455] pnp 00:0b: [io  0x03f8-0x03ff]
[    0.209460] pnp 00:0b: [irq 4]
[    0.209462] pnp 00:0b: [dma 0 disabled]
[    0.209522] pnp 00:0b: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.209605] pnp 00:0c: [io  0x0060]
[    0.209607] pnp 00:0c: [io  0x0064]
[    0.209609] pnp 00:0c: [mem 0xfec00000-0xfec00fff]
[    0.209610] pnp 00:0c: [mem 0xfee00000-0xfee00fff]
[    0.209649] system 00:0c: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.209651] system 00:0c: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.209654] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.209713] pnp 00:0d: [mem 0xe0000000-0xefffffff]
[    0.209750] system 00:0d: [mem 0xe0000000-0xefffffff] has been reserved
[    0.209753] system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.209887] pnp 00:0e: [mem 0x00000000-0x0009ffff]
[    0.209889] pnp 00:0e: [mem 0x000c0000-0x000cffff]
[    0.209891] pnp 00:0e: [mem 0x000e0000-0x000fffff]
[    0.209893] pnp 00:0e: [mem 0x00100000-0x7fffffff]
[    0.209894] pnp 00:0e: [mem 0xe0000000-0xffffffff]
[    0.209944] system 00:0e: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.209947] system 00:0e: [mem 0x000c0000-0x000cffff] could not be reserved
[    0.209949] system 00:0e: [mem 0x000e0000-0x000fffff] could not be reserved
[    0.209951] system 00:0e: [mem 0x00100000-0x7fffffff] could not be reserved
[    0.209953] system 00:0e: [mem 0xe0000000-0xffffffff] could not be reserved
[    0.209956] system 00:0e: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.210071] pnp: PnP ACPI: found 15 devices
[    0.210072] ACPI: ACPI bus type pnp unregistered
[    0.248477] pci 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 05-05] add_size 1000
[    0.248480] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 05-05] add_size 400000
[    0.248488] pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04-04] add_size 200000
[    0.248495] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03-03] add_size 200000
[    0.248502] pci 0000:00:1c.5: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02-02] add_size 200000
[    0.248512] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 400000
[    0.248514] pci 0000:00:1c.3: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[    0.248517] pci 0000:00:1c.4: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[    0.248519] pci 0000:00:1c.5: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[    0.248521] pci 0000:00:1c.0: res[13]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
[    0.248525] pci 0000:00:1c.0: BAR 14: assigned [mem 0x80000000-0x803fffff]
[    0.248527] pci 0000:00:1c.3: BAR 15: assigned [mem 0x80400000-0x805fffff 64bit pref]
[    0.248530] pci 0000:00:1c.4: BAR 15: assigned [mem 0x80600000-0x807fffff 64bit pref]
[    0.248533] pci 0000:00:1c.5: BAR 15: assigned [mem 0x80800000-0x809fffff 64bit pref]
[    0.248535] pci 0000:00:1c.0: BAR 13: assigned [io  0x1000-0x1fff]
[    0.248538] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[    0.248540] pci 0000:00:01.0:   bridge window [io  0xb000-0xbfff]
[    0.248543] pci 0000:00:01.0:   bridge window [mem 0xfc000000-0xfe8fffff]
[    0.248546] pci 0000:00:01.0:   bridge window [mem 0xd4000000-0xdfffffff 64bit pref]
[    0.248549] pci 0000:00:1c.0: PCI bridge to [bus 05-05]
[    0.248552] pci 0000:00:1c.0:   bridge window [io  0x1000-0x1fff]
[    0.248555] pci 0000:00:1c.0:   bridge window [mem 0x80000000-0x803fffff]
[    0.248559] pci 0000:00:1c.0:   bridge window [mem 0xfaf00000-0xfaffffff 64bit pref]
[    0.248564] pci 0000:00:1c.3: PCI bridge to [bus 04-04]
[    0.248566] pci 0000:00:1c.3:   bridge window [io  0xe000-0xefff]
[    0.248570] pci 0000:00:1c.3:   bridge window [mem 0xfeb00000-0xfebfffff]
[    0.248573] pci 0000:00:1c.3:   bridge window [mem 0x80400000-0x805fffff 64bit pref]
[    0.248578] pci 0000:00:1c.4: PCI bridge to [bus 03-03]
[    0.248581] pci 0000:00:1c.4:   bridge window [io  0xd000-0xdfff]
[    0.248585] pci 0000:00:1c.4:   bridge window [mem 0xfea00000-0xfeafffff]
[    0.248588] pci 0000:00:1c.4:   bridge window [mem 0x80600000-0x807fffff 64bit pref]
[    0.248593] pci 0000:00:1c.5: PCI bridge to [bus 02-02]
[    0.248595] pci 0000:00:1c.5:   bridge window [io  0xc000-0xcfff]
[    0.248599] pci 0000:00:1c.5:   bridge window [mem 0xfe900000-0xfe9fffff]
[    0.248602] pci 0000:00:1c.5:   bridge window [mem 0x80800000-0x809fffff 64bit pref]
[    0.248607] pci 0000:00:1e.0: PCI bridge to [bus 06-06]
[    0.248626] pci 0000:00:1c.0: enabling device (0106 -> 0107)
[    0.248648] pci 0000:00:1e.0: setting latency timer to 64
[    0.248651] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.248653] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.248656] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.248658] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[    0.248660] pci_bus 0000:00: resource 8 [mem 0x80000000-0xdfffffff]
[    0.248662] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xffffffff]
[    0.248664] pci_bus 0000:01: resource 0 [io  0xb000-0xbfff]
[    0.248666] pci_bus 0000:01: resource 1 [mem 0xfc000000-0xfe8fffff]
[    0.248668] pci_bus 0000:01: resource 2 [mem 0xd4000000-0xdfffffff 64bit pref]
[    0.248670] pci_bus 0000:05: resource 0 [io  0x1000-0x1fff]
[    0.248672] pci_bus 0000:05: resource 1 [mem 0x80000000-0x803fffff]
[    0.248674] pci_bus 0000:05: resource 2 [mem 0xfaf00000-0xfaffffff 64bit pref]
[    0.248676] pci_bus 0000:04: resource 0 [io  0xe000-0xefff]
[    0.248678] pci_bus 0000:04: resource 1 [mem 0xfeb00000-0xfebfffff]
[    0.248680] pci_bus 0000:04: resource 2 [mem 0x80400000-0x805fffff 64bit pref]
[    0.248682] pci_bus 0000:03: resource 0 [io  0xd000-0xdfff]
[    0.248683] pci_bus 0000:03: resource 1 [mem 0xfea00000-0xfeafffff]
[    0.248685] pci_bus 0000:03: resource 2 [mem 0x80600000-0x807fffff 64bit pref]
[    0.248687] pci_bus 0000:02: resource 0 [io  0xc000-0xcfff]
[    0.248689] pci_bus 0000:02: resource 1 [mem 0xfe900000-0xfe9fffff]
[    0.248691] pci_bus 0000:02: resource 2 [mem 0x80800000-0x809fffff 64bit pref]
[    0.248693] pci_bus 0000:06: resource 4 [io  0x0000-0x0cf7]
[    0.248695] pci_bus 0000:06: resource 5 [io  0x0d00-0xffff]
[    0.248697] pci_bus 0000:06: resource 6 [mem 0x000a0000-0x000bffff]
[    0.248699] pci_bus 0000:06: resource 7 [mem 0x000d0000-0x000dffff]
[    0.248701] pci_bus 0000:06: resource 8 [mem 0x80000000-0xdfffffff]
[    0.248702] pci_bus 0000:06: resource 9 [mem 0xf0000000-0xffffffff]
[    0.248733] NET: Registered protocol family 2
[    0.248778] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.248881] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.249128] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.249262] TCP: Hash tables configured (established 131072 bind 65536)
[    0.249264] TCP: reno registered
[    0.249266] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.249271] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.249313] NET: Registered protocol family 1
[    0.249482] pci 0000:01:00.0: Boot video device
[    0.249501] PCI: CLS 32 bytes, default 64
[    0.249536] Unpacking initramfs...
[    0.300861] Freeing initrd memory: 2904k freed
[    0.301793] apm: BIOS not found.
[    0.301982] audit: initializing netlink socket (disabled)
[    0.301994] type=2000 audit(1343559626.299:1): initialized
[    0.302338] highmem bounce pool size: 64 pages
[    0.302341] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    0.303890] VFS: Disk quotas dquot_6.5.2
[    0.303933] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.304010] msgmni has been set to 1719
[    0.304303] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.304360] io scheduler noop registered
[    0.304361] io scheduler deadline registered
[    0.304366] io scheduler cfq registered (default)
[    0.304470] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[    0.304536] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
[    0.304610] pcieport 0000:00:1c.3: irq 42 for MSI/MSI-X
[    0.304685] pcieport 0000:00:1c.4: irq 43 for MSI/MSI-X
[    0.304759] pcieport 0000:00:1c.5: irq 44 for MSI/MSI-X
[    0.304906] intel_idle: does not run on family 6 model 23
[    0.304923] GHES: HEST is not enabled!
[    0.304934] isapnp: Scanning for PnP cards...
[    0.660595] isapnp: No Plug & Play device found
[    0.660658] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    0.681141] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.702001] 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.702338] i8042: PNP: No PS/2 controller found. Probing ports directly.
[    0.704811] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.704826] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.704932] mousedev: PS/2 mouse device common for all mice
[    0.704977] rtc_cmos 00:03: RTC can wake from S4
[    0.705087] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    0.705108] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    0.705131] cpuidle: using governor ladder
[    0.705132] cpuidle: using governor menu
[    0.705273] TCP: cubic registered
[    0.705357] NET: Registered protocol family 10
[    0.705507] NET: Registered protocol family 17
[    0.705511] Registering the dns_resolver key type
[    0.705551] Using IPI No-Shortcut mode
[    0.705627] PM: Hibernation image not present or could not be loaded.
[    0.705635] registered taskstats version 1
[    0.706104] rtc_cmos 00:03: setting system clock to 2012-07-29 11:00:27 UTC (1343559627)
[    0.706139] Initializing network drop monitor service
[    0.706220] Freeing unused kernel memory: 524k freed
[    0.706378] Write protecting the kernel text: 3812k
[    0.706409] Write protecting the kernel read-only data: 1120k
[    0.712224] systemd-udevd[50]: starting version 187
[    0.734511] usbcore: registered new interface driver usbfs
[    0.734527] usbcore: registered new interface driver hub
[    0.734597] usbcore: registered new device driver usb
[    0.735077] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.735108] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[    0.735111] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[    0.735129] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[    0.735148] ehci_hcd 0000:00:1a.7: debug port 1
[    0.739018] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[    0.739034] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfbfffc00
[    0.739358] SCSI subsystem initialized
[    0.740431] libata version 3.00 loaded.
[    0.741226] ahci 0000:03:00.0: version 3.0
[    0.741265] ahci 0000:03:00.0: JMB361 has only one port
[    0.741273] ahci 0000:03:00.0: forcing port_map 0x3 -> 0x1
[    0.743297] uhci_hcd: USB Universal Host Controller Interface driver
[    0.746687] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[    0.747281] hub 1-0:1.0: USB hub found
[    0.747286] hub 1-0:1.0: 6 ports detected
[    0.747416] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    0.747420] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    0.747428] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[    0.747450] ehci_hcd 0000:00:1d.7: debug port 1
[    0.751348] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[    0.751364] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfbfff800
[    0.753538] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x1 impl SATA mode
[    0.753541] ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part 
[    0.754156] scsi0 : ahci
[    0.754412] scsi1 : ahci
[    0.754557] ata1: SATA max UDMA/133 abar m8192@0xfeafe000 port 0xfeafe100 irq 16
[    0.754559] ata2: DUMMY
[    0.760029] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.760173] hub 2-0:1.0: USB hub found
[    0.760176] hub 2-0:1.0: 6 ports detected
[    0.760287] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[    0.760292] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[    0.760303] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[    0.760331] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000a800
[    0.760499] hub 3-0:1.0: USB hub found
[    0.760503] hub 3-0:1.0: 2 ports detected
[    0.760610] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[    0.760612] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[    0.760620] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[    0.760650] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000a880
[    0.760807] hub 4-0:1.0: USB hub found
[    0.760810] hub 4-0:1.0: 2 ports detected
[    0.760900] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[    0.760902] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[    0.760908] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[    0.760928] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000ac00
[    0.761054] hub 5-0:1.0: USB hub found
[    0.761057] hub 5-0:1.0: 2 ports detected
[    0.761136] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    0.761139] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    0.761145] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[    0.761164] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000a080
[    0.761520] hub 6-0:1.0: USB hub found
[    0.761525] hub 6-0:1.0: 2 ports detected
[    0.761611] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    0.761614] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    0.761624] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[    0.761652] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000a400
[    0.762016] hub 7-0:1.0: USB hub found
[    0.762024] hub 7-0:1.0: 2 ports detected
[    0.762119] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    0.762122] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    0.762128] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[    0.762153] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000a480
[    0.762343] hub 8-0:1.0: USB hub found
[    0.762346] hub 8-0:1.0: 2 ports detected
[    0.762450] ata_piix 0000:00:1f.2: version 2.13
[    0.762467] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[    0.762507] ata_piix 0000:00:1f.2: setting latency timer to 64
[    0.763149] scsi2 : ata_piix
[    0.763255] scsi3 : ata_piix
[    0.764437] ata3: SATA max UDMA/133 cmd 0x9000 ctl 0x8c00 bmdma 0x8480 irq 19
[    0.764441] ata4: SATA max UDMA/133 cmd 0x8880 ctl 0x8800 bmdma 0x8488 irq 19
[    0.764463] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[    0.764495] ata_piix 0000:00:1f.5: setting latency timer to 64
[    0.764712] scsi4 : ata_piix
[    0.764793] scsi5 : ata_piix
[    0.765583] ata5: SATA max UDMA/133 cmd 0xa000 ctl 0x9c00 bmdma 0x9480 irq 19
[    0.765587] ata6: SATA max UDMA/133 cmd 0x9880 ctl 0x9800 bmdma 0x9488 irq 19
[    0.765646] pata_acpi 0000:03:00.1: setting latency timer to 64
[    1.053355] usb 1-5: new high-speed USB device number 2 using ehci_hcd
[    1.073378] ata1: SATA link down (SStatus 0 SControl 300)
[    1.093981] ata5: SATA link down (SStatus 0 SControl 300)
[    1.104642] ata6: SATA link down (SStatus 0 SControl 300)
[    1.303351] Refined TSC clocksource calibration: 2833.011 MHz.
[    1.303356] Switching to clocksource tsc
[    1.556729] ata3.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.556741] ata3.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.556931] ata4.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.556942] ata4.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.570764] ata3.00: ATA-7: WDC WD740ADFD-00NLR5, 21.07QR5, max UDMA/133
[    1.570768] ata3.00: 145226112 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    1.571780] ata3.01: ATA-7: Maxtor 6V300F0, VA111900, max UDMA/133
[    1.571783] ata3.01: 586114704 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    1.584089] ata3.00: configured for UDMA/133
[    1.586888] ata4.00: HPA detected: current 312579695, native 312581808
[    1.586893] ata4.00: ATA-7: WDC WD1600JS-00MHB0, 02.01C03, max UDMA/133
[    1.586896] ata4.00: 312579695 sectors, multi 16: LBA48 
[    1.587075] ata4.01: ATA-7: Hitachi HDT725032VLA360, V54OA7EA, max UDMA/133
[    1.587079] ata4.01: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    1.593554] ata4.00: configured for UDMA/133
[    1.597791] ata3.01: configured for UDMA/133
[    1.597910] scsi 2:0:0:0: Direct-Access     ATA      WDC WD740ADFD-00 21.0 PQ: 0 ANSI: 5
[    1.598087] scsi 2:0:1:0: Direct-Access     ATA      Maxtor 6V300F0   VA11 PQ: 0 ANSI: 5
[    1.606947] ata4.01: configured for UDMA/133
[    1.607053] scsi 3:0:0:0: Direct-Access     ATA      WDC WD1600JS-00M 02.0 PQ: 0 ANSI: 5
[    1.607253] scsi 3:0:1:0: Direct-Access     ATA      Hitachi HDT72503 V54O PQ: 0 ANSI: 5
[    1.607628] pata_jmicron 0000:03:00.1: setting latency timer to 64
[    1.607968] scsi6 : pata_jmicron
[    1.608246] scsi7 : pata_jmicron
[    1.608966] ata7: PATA max UDMA/100 cmd 0xdc00 ctl 0xd880 bmdma 0xd400 irq 17
[    1.608969] ata8: PATA max UDMA/100 cmd 0xd800 ctl 0xd480 bmdma 0xd408 irq 17
[    1.612463] sd 2:0:0:0: [sda] 145226112 512-byte logical blocks: (74.3 GB/69.2 GiB)
[    1.612493] sd 2:0:1:0: [sdb] 586114704 512-byte logical blocks: (300 GB/279 GiB)
[    1.612514] sd 3:0:0:0: [sdc] 312579695 512-byte logical blocks: (160 GB/149 GiB)
[    1.612551] sd 2:0:0:0: [sda] Write Protect is off
[    1.612556] sd 3:0:1:0: [sdd] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[    1.612559] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.612564] sd 2:0:1:0: [sdb] Write Protect is off
[    1.612567] sd 2:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[    1.612596] sd 2:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.612599] sd 3:0:0:0: [sdc] Write Protect is off
[    1.612603] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[    1.612611] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.612624] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.612639] sd 3:0:1:0: [sdd] Write Protect is off
[    1.612641] sd 3:0:1:0: [sdd] Mode Sense: 00 3a 00 00
[    1.612660] sd 3:0:1:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.629729]  sdb: sdb1
[    1.638871]  sdd: sdd1
[    1.639013]  sdc: sdc1 sdc2 sdc3
[    1.639240] sd 3:0:1:0: [sdd] Attached SCSI disk
[    1.639304] sd 3:0:0:0: [sdc] Attached SCSI disk
[    1.645336]  sda: sda1 sda2
[    1.651080] sd 2:0:1:0: [sdb] Attached SCSI disk
[    1.651120] sd 2:0:0:0: [sda] Attached SCSI disk
[    1.767173] ata7.00: ATAPI: HL-DT-ST DVDRAM GSA-4167B, DL13, max UDMA/33
[    1.780577] ata7.00: configured for UDMA/33
[    1.789452] scsi 6:0:0:0: CD-ROM            HL-DT-ST DVDRAM GSA-4167B DL13 PQ: 0 ANSI: 5
[    1.823346] usb 7-1: new full-speed USB device number 2 using uhci_hcd
[    1.960093] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.960097] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.960396] sr 6:0:0:0: Attached scsi CD-ROM sr0
[    2.018103] input: Logitech G500 as /devices/pci0000:00/0000:00:1d.1/usb7/7-1/7-1:1.0/input/input0
[    2.018180] generic-usb 0003:046D:C068.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech G500] on usb-0000:00:1d.1-1/input0
[    2.026816] input: Logitech G500 as /devices/pci0000:00/0000:00:1d.1/usb7/7-1/7-1:1.1/input/input1
[    2.026938] generic-usb 0003:046D:C068.0002: input,hiddev0,hidraw1: USB HID v1.11 Keyboard [Logitech G500] on usb-0000:00:1d.1-1/input1
[    2.026958] usbcore: registered new interface driver usbhid
[    2.026959] usbhid: USB HID core driver
[    2.236679] usb 7-2: new low-speed USB device number 3 using uhci_hcd
[    2.313441] EXT4-fs (sda2): mounting ext3 file system using the ext4 subsystem
[    2.318714] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[    2.423066] input: Logitech USB Multimedia Keyboard as /devices/pci0000:00/0000:00:1d.1/usb7/7-2/7-2:1.0/input/input2
[    2.423132] generic-usb 0003:046D:C317.0003: input,hidraw2: USB HID v1.10 Keyboard [Logitech USB Multimedia Keyboard] on usb-0000:00:1d.1-2/input0
[    2.461742] input: Logitech USB Multimedia Keyboard as /devices/pci0000:00/0000:00:1d.1/usb7/7-2/7-2:1.1/input/input3
[    2.461800] generic-usb 0003:046D:C317.0004: input,hidraw3: USB HID v1.10 Device [Logitech USB Multimedia Keyboard] on usb-0000:00:1d.1-2/input1
[    3.650311] systemd-udevd[151]: starting version 187
[    4.287002] input: PC Speaker as /devices/platform/pcspkr/input/input4
[    4.330449] Linux agpgart interface v0.103
[    4.391975] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input5
[    4.391981] ACPI: Power Button [PWRB]
[    4.392043] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
[    4.392046] ACPI: Power Button [PWRF]
[    4.441963] iTCO_vendor_support: vendor-support=0
[    4.442648] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
[    4.442734] iTCO_wdt: Found a ICH10R TCO device (Version=2, TCOBASE=0x0860)
[    4.442790] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    4.497221] ACPI Warning: 0x00000400-0x0000041f SystemIO conflicts with Region \SMRG 1 (20120320/utaddress-251)
[    4.497226] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    4.749531] microcode: CPU0 sig=0x1067a, pf=0x10, revision=0xa07
[    4.784993] microcode: CPU1 sig=0x1067a, pf=0x10, revision=0xa07
[    4.785420] microcode: CPU2 sig=0x1067a, pf=0x10, revision=0xa07
[    4.785803] microcode: CPU3 sig=0x1067a, pf=0x10, revision=0xa07
[    4.786231] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    5.219764] Linux media interface: v0.10
[    5.420067] firewire_ohci 0000:04:00.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x11
[    5.593979] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X
[    5.594571] Linux video capture interface: v2.00
[    5.614093] nvidia: module license 'NVIDIA' taints kernel.
[    5.614097] Disabling lock debugging due to kernel taint
[    5.627654] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[    5.627842] NVRM: loading NVIDIA UNIX x86 Kernel Module  302.17  Tue Jun 12 18:37:51 PDT 2012
[    5.642727] uvcvideo: Found UVC 1.00 device <unnamed> (046d:0809)
[    5.657583] input: UVC Camera (046d:0809) as /devices/pci0000:00/0000:00:1a.7/usb1/1-5/1-5:1.0/input/input7
[    5.657664] usbcore: registered new interface driver uvcvideo
[    5.657665] USB Video Class driver (1.1.1)
[    5.743117] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[    5.743314] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[    5.743414] input: HDA Intel Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[    5.743496] input: HDA Intel Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[    5.743601] input: HDA Intel Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[    5.744250] input: HDA Intel Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[    5.748503] hda_intel: Disabling MSI
[    5.920090] firewire_core 0000:04:00.0: created device fw0: GUID 001e8c0001d58481, S400
[    6.078944] usbcore: registered new interface driver snd-usb-audio
[    6.260209] set resolution quirk: cval->res = 384
[    6.610117] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input14
[    6.610219] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input15
[    6.610282] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input16
[    6.610345] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input17
[    6.839612] EXT4-fs (sda2): re-mounted. Opts: (null)
[    6.997988] fuse init (API version 7.18)
[    7.318862] EXT4-fs (sdb1): warning: maximal mount count reached, running e2fsck is recommended
[    7.319390] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
[    7.625490] Adding 8289504k swap on /dev/sdc1.  Priority:-1 extents:1 across:8289504k 
[    9.330544] ATL1E 0000:02:00.0: irq 46 for MSI/MSI-X
[    9.330673] ATL1E 0000:02:00.0: eth0: NIC Link is Up <100 Mbps Full Duplex>
[    9.330749] ADDRCONF(NETDEV_UP): eth0: link is not ready
[    9.330881] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   20.190004] eth0: no IPv6 routers present
[   26.034112] EXT4-fs (sda2): re-mounted. Opts: commit=0
[   26.035771] EXT4-fs (sdb1): re-mounted. Opts: commit=0
 

Offline

#6 2012-07-30 15:28:49

sweetthdevil
Member
Registered: 2009-10-20
Posts: 432

Re: Slow GDM - different issues than other posts

I have searched the web extensively today and found nothing. I have checked as many log as I thought were relevant and I found nothing.

Don't really want to re-install grub (as oppose to the grub2) to check if it's the cause so if you have any suggestion I am all open,

Many thanks,

Offline

Board footer

Powered by FluxBB