You are not logged in.

#1 2012-08-01 14:25:04

houmles
Member
Registered: 2011-09-22
Posts: 7

[solved] slim - waiting for login screen

Hi,

I am using slim + openbox. When I start my computer first time everything works as normal. Problem occurs when I switch to console, do /etc/rc.d/slim stop and then start it again.
Screen flashes as xorg starting and is black for ~60 seconds. Then login screen appears as normal. I can reproduce it everytime if it's not clean boot.
I try to reinstall slim and use default slim.conf and it didn't helped. When I start gdm + openbox it works everytime ok.
I don't have custom xorg.conf, xorg detects all automaticaly.

Anyone have some idea whats going on?

Thanks


cat /var/log/Xorg.0.log

[    18.893] 
X.Org X Server 1.12.3
Release Date: 2012-07-09
[    18.893] X Protocol Version 11, Revision 0
[    18.893] Build Operating System: Linux 3.4.4-3-ARCH x86_64 
[    18.893] Current Operating System: Linux dell 3.4.7-1-ARCH #1 SMP PREEMPT Sun Jul 29 22:02:56 CEST 2012 x86_64
[    18.893] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=07a139e3-cee8-4691-8707-46feb828731e ro add_efi_memmap ip=:::::eth0:dhcp cryptdevice=/dev/sda2:crypt:allow-discards init=/bin/systemd
[    18.893] Build Date: 09 July 2012  03:59:39PM
[    18.893]  
[    18.893] Current version of pixman: 0.26.2
[    18.893] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[    18.893] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    18.893] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Aug  1 16:17:19 2012
[    18.897] (==) Using config directory: "/etc/X11/xorg.conf.d"
[    18.898] (==) No Layout section.  Using the first Screen section.
[    18.898] (==) No screen section available. Using defaults.
[    18.898] (**) |-->Screen "Default Screen Section" (0)
[    18.898] (**) |   |-->Monitor "<default monitor>"
[    18.900] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[    18.900] (==) Automatically adding devices
[    18.900] (==) Automatically enabling devices
[    18.901] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[    18.901] 	Entry deleted from font path.
[    18.901] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[    18.901] 	Entry deleted from font path.
[    18.901] 	(Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[    18.901] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[    18.901] 	Entry deleted from font path.
[    18.901] 	(Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[    18.902] (==) FontPath set to:
	/usr/share/fonts/misc/,
	/usr/share/fonts/TTF/,
	/usr/share/fonts/Type1/
[    18.902] (==) ModulePath set to "/usr/lib/xorg/modules"
[    18.902] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[    18.902] (II) Loader magic: 0x7c8b00
[    18.902] (II) Module ABI versions:
[    18.902] 	X.Org ANSI C Emulation: 0.4
[    18.902] 	X.Org Video Driver: 12.0
[    18.902] 	X.Org XInput driver : 16.0
[    18.902] 	X.Org Server Extension : 6.0
[    18.902] (--) PCI:*(0:0:2:0) 8086:0126:1028:0493 rev 9, Mem @ 0xe1400000/4194304, 0xd0000000/268435456, I/O @ 0x00004000/64
[    18.902] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[    18.902] (II) LoadModule: "extmod"
[    18.903] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[    18.906] (II) Module extmod: vendor="X.Org Foundation"
[    18.906] 	compiled for 1.12.3, module version = 1.0.0
[    18.906] 	Module class: X.Org Server Extension
[    18.906] 	ABI class: X.Org Server Extension, version 6.0
[    18.906] (II) Loading extension MIT-SCREEN-SAVER
[    18.906] (II) Loading extension XFree86-VidModeExtension
[    18.906] (II) Loading extension XFree86-DGA
[    18.906] (II) Loading extension DPMS
[    18.906] (II) Loading extension XVideo
[    18.906] (II) Loading extension XVideo-MotionCompensation
[    18.906] (II) Loading extension X-Resource
[    18.906] (II) LoadModule: "dbe"
[    18.906] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[    18.907] (II) Module dbe: vendor="X.Org Foundation"
[    18.907] 	compiled for 1.12.3, module version = 1.0.0
[    18.907] 	Module class: X.Org Server Extension
[    18.907] 	ABI class: X.Org Server Extension, version 6.0
[    18.907] (II) Loading extension DOUBLE-BUFFER
[    18.907] (II) LoadModule: "glx"
[    18.907] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    18.913] (II) Module glx: vendor="X.Org Foundation"
[    18.913] 	compiled for 1.12.3, module version = 1.0.0
[    18.913] 	ABI class: X.Org Server Extension, version 6.0
[    18.913] (==) AIGLX enabled
[    18.915] (II) Loading extension GLX
[    18.915] (II) LoadModule: "record"
[    18.915] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[    18.917] (II) Module record: vendor="X.Org Foundation"
[    18.917] 	compiled for 1.12.3, module version = 1.13.0
[    18.917] 	Module class: X.Org Server Extension
[    18.917] 	ABI class: X.Org Server Extension, version 6.0
[    18.917] (II) Loading extension RECORD
[    18.917] (II) LoadModule: "dri"
[    18.917] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[    18.919] (II) Module dri: vendor="X.Org Foundation"
[    18.919] 	compiled for 1.12.3, module version = 1.0.0
[    18.919] 	ABI class: X.Org Server Extension, version 6.0
[    18.919] (II) Loading extension XFree86-DRI
[    18.919] (II) LoadModule: "dri2"
[    18.919] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[    18.920] (II) Module dri2: vendor="X.Org Foundation"
[    18.920] 	compiled for 1.12.3, module version = 1.2.0
[    18.920] 	ABI class: X.Org Server Extension, version 6.0
[    18.920] (II) Loading extension DRI2
[    18.920] (==) Matched intel as autoconfigured driver 0
[    18.920] (==) Matched vesa as autoconfigured driver 1
[    18.920] (==) Matched fbdev as autoconfigured driver 2
[    18.920] (==) Assigned the driver to the xf86ConfigLayout
[    18.920] (II) LoadModule: "intel"
[    18.920] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[    18.931] (II) Module intel: vendor="X.Org Foundation"
[    18.931] 	compiled for 1.12.3, module version = 2.20.2
[    18.931] 	Module class: X.Org Video Driver
[    18.931] 	ABI class: X.Org Video Driver, version 12.0
[    18.931] (II) LoadModule: "vesa"
[    18.932] (WW) Warning, couldn't open module vesa
[    18.932] (II) UnloadModule: "vesa"
[    18.932] (II) Unloading vesa
[    18.932] (EE) Failed to load module "vesa" (module does not exist, 0)
[    18.932] (II) LoadModule: "fbdev"
[    18.932] (WW) Warning, couldn't open module fbdev
[    18.932] (II) UnloadModule: "fbdev"
[    18.932] (II) Unloading fbdev
[    18.932] (EE) Failed to load module "fbdev" (module does not exist, 0)
[    18.932] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
	i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
	E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
	965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
	4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
	Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
	Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
	Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
	Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
	Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server,
	Ivybridge Server (GT2)
[    18.932] (++) using VT number 7

[    18.936] drmOpenDevice: node name is /dev/dri/card0
[    18.936] drmOpenDevice: open result is 9, (OK)
[    18.936] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[    18.936] drmOpenDevice: node name is /dev/dri/card0
[    18.936] drmOpenDevice: open result is 9, (OK)
[    18.936] drmOpenByBusid: drmOpenMinor returns 9
[    18.937] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[    18.937] (II) intel(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[    18.937] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[    18.937] (==) intel(0): RGB weight 888
[    18.937] (==) intel(0): Default visual is TrueColor
[    18.937] (--) intel(0): Integrated Graphics Chipset: Intel(R) Sandybridge Mobile (GT2+)
[    18.937] (**) intel(0): Relaxed fencing enabled
[    18.937] (**) intel(0): Wait on SwapBuffers? enabled
[    18.937] (**) intel(0): Triple buffering? enabled
[    18.937] (**) intel(0): Framebuffer tiled
[    18.937] (**) intel(0): Pixmaps tiled
[    18.937] (**) intel(0): 3D buffers tiled
[    18.939] (**) intel(0): SwapBuffers wait enabled
[    18.939] (==) intel(0): video overlay key set to 0x101fe
[    18.939] (II) intel(0): Output LVDS1 has no monitor section
[    18.956] (II) intel(0): found backlight control interface /sys/class/backlight/acpi_video0
[    18.956] (II) intel(0): Output VGA1 has no monitor section
[    18.957] (II) intel(0): Output HDMI1 has no monitor section
[    19.000] (II) intel(0): Output DP1 has no monitor section
[    19.079] (II) intel(0): Output HDMI2 has no monitor section
[    19.151] (II) intel(0): Output HDMI3 has no monitor section
[    19.193] (II) intel(0): Output DP2 has no monitor section
[    19.233] (II) intel(0): Output DP3 has no monitor section
[    19.233] (II) intel(0): EDID for output LVDS1
[    19.233] (II) intel(0): Manufacturer: LGD  Model: 2df  Serial#: 0
[    19.233] (II) intel(0): Year: 2010  Week: 0
[    19.233] (II) intel(0): EDID Version: 1.4
[    19.233] (II) intel(0): Digital Display Input
[    19.233] (II) intel(0): 6 bits per channel
[    19.233] (II) intel(0): Digital interface is undefined
[    19.233] (II) intel(0): Max Image Size [cm]: horiz.: 31  vert.: 17
[    19.233] (II) intel(0): Gamma: 2.20
[    19.233] (II) intel(0): No DPMS capabilities specified
[    19.234] (II) intel(0): Supported color encodings: RGB 4:4:4 
[    19.234] (II) intel(0): First detailed timing is preferred mode
[    19.234] (II) intel(0): Preferred mode is native pixel format and refresh rate
[    19.234] (II) intel(0): redX: 0.591 redY: 0.348   greenX: 0.340 greenY: 0.558
[    19.234] (II) intel(0): blueX: 0.157 blueY: 0.129   whiteX: 0.313 whiteY: 0.329
[    19.234] (II) intel(0): Manufacturer's mask: 0
[    19.234] (II) intel(0): Supported detailed timing:
[    19.234] (II) intel(0): clock: 96.6 MHz   Image Size:  310 x 174 mm
[    19.234] (II) intel(0): h_active: 1600  h_sync: 1648  h_sync_end 1696 h_blank_end 1764 h_border: 0
[    19.234] (II) intel(0): v_active: 900  v_sync: 903  v_sync_end 907 v_blanking: 912 v_border: 0
[    19.234] (II) intel(0): Supported detailed timing:
[    19.234] (II) intel(0): clock: 96.6 MHz   Image Size:  310 x 174 mm
[    19.234] (II) intel(0): h_active: 1600  h_sync: 1648  h_sync_end 1696 h_blank_end 2340 h_border: 0
[    19.234] (II) intel(0): v_active: 900  v_sync: 903  v_sync_end 907 v_blanking: 1024 v_border: 0
[    19.234] (II) intel(0):  GJ494140WD1
[    19.234] (II) intel(0): Unknown vendor-specific block 0
[    19.234] (II) intel(0): EDID (in hex):
[    19.234] (II) intel(0): 	00ffffffffffff0030e4df0200000000
[    19.234] (II) intel(0): 	00140104901f11780243459759578e28
[    19.236] (II) intel(0): 	21505400000001010101010101010101
[    19.236] (II) intel(0): 	010101010101be2540a460840c303030
[    19.236] (II) intel(0): 	340036ae1000001abe2540e462847c30
[    19.236] (II) intel(0): 	3030340036ae1000001a000000fe0047
[    19.236] (II) intel(0): 	4a343934803134305744310a00000000
[    19.236] (II) intel(0): 	000041319e0000000002010a20200028
[    19.236] (II) intel(0): EDID vendor "LGD", prod id 735
[    19.236] (II) intel(0): Printing DDC gathered Modelines:
[    19.237] (II) intel(0): Modeline "1600x900"x0.0   96.62  1600 1648 1696 1764  900 903 907 912 +hsync -vsync (54.8 kHz eP)
[    19.237] (II) intel(0): Modeline "1600x900"x0.0   96.62  1600 1648 1696 2340  900 903 907 1024 +hsync -vsync (41.3 kHz e)
[    19.237] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[    19.237] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[    19.237] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[    19.237] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[    19.237] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[    19.237] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[    19.237] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[    19.237] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[    19.237] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[    19.237] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[    19.237] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[    19.237] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[    19.237] (II) intel(0): Printing probed modes for output LVDS1
[    19.237] (II) intel(0): Modeline "1600x900"x60.1   96.62  1600 1648 1696 1764  900 903 907 912 +hsync -vsync (54.8 kHz eP)
[    19.237] (II) intel(0): Modeline "1600x900"x40.3   96.62  1600 1648 1696 2340  900 903 907 1024 +hsync -vsync (41.3 kHz e)
[    19.237] (II) intel(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz d)
[    19.237] (II) intel(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz d)
[    19.237] (II) intel(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz d)
[    19.237] (II) intel(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz d)
[    19.237] (II) intel(0): EDID for output VGA1
[    19.238] (II) intel(0): EDID for output HDMI1
[    19.280] (II) intel(0): EDID for output DP1
[    19.352] (II) intel(0): EDID for output HDMI2
[    19.352] (II) intel(0): Manufacturer: AIC  Model: 4190  Serial#: 4887
[    19.352] (II) intel(0): Year: 2005  Week: 32
[    19.352] (II) intel(0): EDID Version: 1.3
[    19.352] (II) intel(0): Digital Display Input
[    19.352] (II) intel(0): DFP 1.x compatible TMDS
[    19.352] (II) intel(0): Max Image Size [cm]: horiz.: 37  vert.: 30
[    19.352] (II) intel(0): Gamma: 2.20
[    19.352] (II) intel(0): DPMS capabilities: StandBy Suspend Off
[    19.352] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[    19.352] (II) intel(0): First detailed timing is preferred mode
[    19.352] (II) intel(0): redX: 0.647 redY: 0.346   greenX: 0.292 greenY: 0.602
[    19.352] (II) intel(0): blueX: 0.149 blueY: 0.130   whiteX: 0.312 whiteY: 0.328
[    19.352] (II) intel(0): Supported established timings:
[    19.352] (II) intel(0): 720x400@70Hz
[    19.352] (II) intel(0): 640x480@60Hz
[    19.352] (II) intel(0): 640x480@67Hz
[    19.352] (II) intel(0): 640x480@72Hz
[    19.352] (II) intel(0): 640x480@75Hz
[    19.352] (II) intel(0): 800x600@56Hz
[    19.352] (II) intel(0): 800x600@60Hz
[    19.352] (II) intel(0): 800x600@72Hz
[    19.352] (II) intel(0): 800x600@75Hz
[    19.352] (II) intel(0): 832x624@75Hz
[    19.352] (II) intel(0): 1024x768@60Hz
[    19.352] (II) intel(0): 1024x768@70Hz
[    19.352] (II) intel(0): 1024x768@75Hz
[    19.352] (II) intel(0): 1280x1024@75Hz
[    19.352] (II) intel(0): Manufacturer's mask: 0
[    19.352] (II) intel(0): Supported standard timings:
[    19.352] (II) intel(0): #0: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
[    19.352] (II) intel(0): Supported detailed timing:
[    19.352] (II) intel(0): clock: 108.0 MHz   Image Size:  375 x 301 mm
[    19.352] (II) intel(0): h_active: 1280  h_sync: 1328  h_sync_end 1440 h_blank_end 1688 h_border: 0
[    19.352] (II) intel(0): v_active: 1024  v_sync: 1025  v_sync_end 1028 v_blanking: 1066 v_border: 0
[    19.352] (II) intel(0): Ranges: V min: 49 V max: 75 Hz, H min: 24 H max: 80 kHz, PixClock max 145 MHz
[    19.352] (II) intel(0): Monitor name: F-419
[    19.352] (II) intel(0): Serial No: 4887
[    19.352] (II) intel(0): EDID (in hex):
[    19.352] (II) intel(0): 	00ffffffffffff000523904117130000
[    19.352] (II) intel(0): 	200f010381251e78eaec50a5584a9a26
[    19.352] (II) intel(0): 	215054bfef0081800101010101010101
[    19.352] (II) intel(0): 	010101010101302a009851002a403070
[    19.352] (II) intel(0): 	1300772d1100001e000000fd00314b18
[    19.352] (II) intel(0): 	500e000a202020202020000000fc0046
[    19.352] (II) intel(0): 	2d3431390a20202020202020000000ff
[    19.352] (II) intel(0): 	00343838370a202020202020202000fe
[    19.352] (II) intel(0): Printing probed modes for output HDMI2
[    19.352] (II) intel(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[    19.352] (II) intel(0): Modeline "1280x1024"x75.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[    19.352] (II) intel(0): Modeline "1024x768"x75.1   78.80  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.1 kHz e)
[    19.353] (II) intel(0): Modeline "1024x768"x70.1   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[    19.353] (II) intel(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    19.353] (II) intel(0): Modeline "832x624"x74.6   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz e)
[    19.353] (II) intel(0): Modeline "800x600"x72.2   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz e)
[    19.353] (II) intel(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[    19.353] (II) intel(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    19.353] (II) intel(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[    19.353] (II) intel(0): Modeline "640x480"x72.8   31.50  640 664 704 832  480 489 491 520 -hsync -vsync (37.9 kHz e)
[    19.353] (II) intel(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[    19.353] (II) intel(0): Modeline "640x480"x66.7   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)
[    19.353] (II) intel(0): Modeline "640x480"x60.0   25.20  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    19.353] (II) intel(0): Modeline "720x400"x70.1   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[    19.424] (II) intel(0): EDID for output HDMI3
[    19.424] (II) intel(0): Manufacturer: HWP  Model: 26f7  Serial#: 16843009
[    19.424] (II) intel(0): Year: 2009  Week: 33
[    19.424] (II) intel(0): EDID Version: 1.3
[    19.424] (II) intel(0): Digital Display Input
[    19.424] (II) intel(0): Max Image Size [cm]: horiz.: 54  vert.: 35
[    19.424] (II) intel(0): Gamma: 2.20
[    19.424] (II) intel(0): DPMS capabilities: StandBy Suspend Off
[    19.424] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[    19.424] (II) intel(0): Default color space is primary color space
[    19.424] (II) intel(0): First detailed timing is preferred mode
[    19.424] (II) intel(0): redX: 0.640 redY: 0.328   greenX: 0.300 greenY: 0.600
[    19.424] (II) intel(0): blueX: 0.149 blueY: 0.060   whiteX: 0.312 whiteY: 0.328
[    19.424] (II) intel(0): Supported established timings:
[    19.424] (II) intel(0): 720x400@70Hz
[    19.424] (II) intel(0): 640x480@60Hz
[    19.424] (II) intel(0): 640x480@75Hz
[    19.424] (II) intel(0): 800x600@60Hz
[    19.424] (II) intel(0): 800x600@75Hz
[    19.424] (II) intel(0): 832x624@75Hz
[    19.424] (II) intel(0): 1024x768@60Hz
[    19.424] (II) intel(0): 1024x768@75Hz
[    19.425] (II) intel(0): 1280x1024@75Hz
[    19.425] (II) intel(0): 1152x864@75Hz
[    19.425] (II) intel(0): Manufacturer's mask: 0
[    19.425] (II) intel(0): Supported standard timings:
[    19.425] (II) intel(0): #0: hsize: 1280  vsize 960  refresh: 60  vid: 16513
[    19.425] (II) intel(0): #1: hsize: 1600  vsize 1000  refresh: 60  vid: 169
[    19.425] (II) intel(0): #2: hsize: 1600  vsize 1200  refresh: 60  vid: 16553
[    19.425] (II) intel(0): #3: hsize: 1680  vsize 1050  refresh: 60  vid: 179
[    19.425] (II) intel(0): #4: hsize: 1920  vsize 1200  refresh: 60  vid: 209
[    19.425] (II) intel(0): Supported detailed timing:
[    19.425] (II) intel(0): clock: 154.0 MHz   Image Size:  546 x 352 mm
[    19.425] (II) intel(0): h_active: 1920  h_sync: 1968  h_sync_end 2000 h_blank_end 2080 h_border: 0
[    19.425] (II) intel(0): v_active: 1200  v_sync: 1203  v_sync_end 1209 v_blanking: 1235 v_border: 0
[    19.425] (II) intel(0): Monitor name: HP LP2475w
[    19.425] (II) intel(0): Ranges: V min: 48 V max: 85 Hz, H min: 30 H max: 94 kHz, PixClock max 175 MHz
[    19.425] (II) intel(0): Serial No: PLC933018W
[    19.425] (II) intel(0): EDID (in hex):
[    19.425] (II) intel(0): 	00ffffffffffff0022f0f72601010101
[    19.425] (II) intel(0): 	2113010380362378eece50a3544c9926
[    19.425] (II) intel(0): 	0f5054a56b808140a900a940b300d100
[    19.425] (II) intel(0): 	010101010101283c80a070b023403020
[    19.425] (II) intel(0): 	360022602100001a000000fc00485020
[    19.425] (II) intel(0): 	4c5032343735770a2020000000fd0030
[    19.425] (II) intel(0): 	551e5e11000a202020202020000000ff
[    19.425] (II) intel(0): 	00504c43393333303138570a2020005f
[    19.425] (II) intel(0): Printing probed modes for output HDMI3
[    19.425] (II) intel(0): Modeline "1920x1200"x60.0  154.00  1920 1968 2000 2080  1200 1203 1209 1235 +hsync -vsync (74.0 kHz eP)
[    19.425] (II) intel(0): Modeline "1600x1200"x60.0  162.00  1600 1664 1856 2160  1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[    19.425] (II) intel(0): Modeline "1680x1050"x60.0  146.25  1680 1784 1960 2240  1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
[    19.425] (II) intel(0): Modeline "1600x1000"x60.0  133.16  1600 1704 1872 2144  1000 1001 1004 1035 -hsync +vsync (62.1 kHz)
[    19.425] (II) intel(0): Modeline "1280x1024"x75.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[    19.425] (II) intel(0): Modeline "1280x960"x60.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz e)
[    19.425] (II) intel(0): Modeline "1152x864"x75.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
[    19.425] (II) intel(0): Modeline "1024x768"x75.1   78.80  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.1 kHz e)
[    19.425] (II) intel(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    19.425] (II) intel(0): Modeline "832x624"x74.6   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz e)
[    19.425] (II) intel(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[    19.425] (II) intel(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    19.425] (II) intel(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[    19.425] (II) intel(0): Modeline "640x480"x60.0   25.20  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    19.425] (II) intel(0): Modeline "720x400"x70.1   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[    19.466] (II) intel(0): EDID for output DP2
[    19.506] (II) intel(0): EDID for output DP3
[    19.506] (II) intel(0): Output LVDS1 connected
[    19.506] (II) intel(0): Output VGA1 disconnected
[    19.507] (II) intel(0): Output HDMI1 disconnected
[    19.507] (II) intel(0): Output DP1 disconnected
[    19.507] (II) intel(0): Output HDMI2 connected
[    19.507] (II) intel(0): Output HDMI3 connected
[    19.507] (II) intel(0): Output DP2 disconnected
[    19.507] (II) intel(0): Output DP3 disconnected
[    19.507] (II) intel(0): Using fuzzy aspect match for initial modes
[    19.507] (II) intel(0): Output LVDS1 using initial mode 1024x768
[    19.507] (II) intel(0): Output HDMI2 using initial mode 1024x768
[    19.507] (II) intel(0): Output HDMI3 using initial mode 1024x768
[    19.507] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[    19.507] (II) intel(0): Kernel page flipping support detected, enabling
[    19.507] (**) intel(0): Display dimensions: (310, 170) mm
[    19.507] (**) intel(0): DPI set to (83, 114)
[    19.507] (II) Loading sub module "fb"
[    19.507] (II) LoadModule: "fb"
[    19.507] (II) Loading /usr/lib/xorg/modules/libfb.so
[    19.513] (II) Module fb: vendor="X.Org Foundation"
[    19.513] 	compiled for 1.12.3, module version = 1.0.0
[    19.513] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    19.513] (II) Loading sub module "dri2"
[    19.513] (II) LoadModule: "dri2"
[    19.513] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[    19.513] (II) Module dri2: vendor="X.Org Foundation"
[    19.513] 	compiled for 1.12.3, module version = 1.2.0
[    19.513] 	ABI class: X.Org Server Extension, version 6.0
[    19.513] (==) Depth 24 pixmap format is 32 bpp
[    19.513] (II) intel(0): [DRI2] Setup complete
[    19.514] (II) intel(0): [DRI2]   DRI driver: i965
[    19.514] (II) intel(0): Allocated new frame buffer 1024x768 stride 4096, tiled
[    19.524] (II) UXA(0): Driver registered support for the following operations:
[    19.525] (II)         solid
[    19.525] (II)         copy
[    19.525] (II)         composite (RENDER acceleration)
[    19.525] (II)         put_image
[    19.525] (II)         get_image
[    19.525] (==) intel(0): Backing store disabled
[    19.525] (==) intel(0): Silken mouse enabled
[    19.525] (II) intel(0): Initializing HW Cursor
[    19.525] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[    19.553] (==) intel(0): DPMS enabled
[    19.553] (==) intel(0): Intel XvMC decoder enabled
[    19.553] (II) intel(0): Set up textured video
[    19.553] (II) intel(0): [XvMC] xvmc_vld driver initialized.
[    19.553] (II) intel(0): direct rendering: DRI2 Enabled
[    19.553] (==) intel(0): hotplug detection: "enabled"
[    20.191] (--) RandR disabled
[    20.191] (II) Initializing built-in extension Generic Event Extension
[    20.191] (II) Initializing built-in extension SHAPE
[    20.191] (II) Initializing built-in extension MIT-SHM
[    20.191] (II) Initializing built-in extension XInputExtension
[    20.191] (II) Initializing built-in extension XTEST
[    20.191] (II) Initializing built-in extension BIG-REQUESTS
[    20.191] (II) Initializing built-in extension SYNC
[    20.191] (II) Initializing built-in extension XKEYBOARD
[    20.191] (II) Initializing built-in extension XC-MISC
[    20.191] (II) Initializing built-in extension SECURITY
[    20.191] (II) Initializing built-in extension XINERAMA
[    20.191] (II) Initializing built-in extension XFIXES
[    20.191] (II) Initializing built-in extension RENDER
[    20.191] (II) Initializing built-in extension RANDR
[    20.191] (II) Initializing built-in extension COMPOSITE
[    20.191] (II) Initializing built-in extension DAMAGE
[    20.227] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[    20.227] (II) AIGLX: enabled GLX_INTEL_swap_event
[    20.227] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[    20.227] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[    20.227] (II) AIGLX: Loaded and initialized i965
[    20.227] (II) GLX: Initialized DRI2 GL provider for screen 0
[    20.228] (II) intel(0): Setting screen physical size to 270 x 203
[    20.305] (II) config/udev: Adding input device Power Button (/dev/input/event8)
[    20.305] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    20.305] (II) LoadModule: "evdev"
[    20.305] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    20.307] (II) Module evdev: vendor="X.Org Foundation"
[    20.307] 	compiled for 1.12.3, module version = 2.7.1
[    20.307] 	Module class: X.Org XInput Driver
[    20.307] 	ABI class: X.Org XInput driver, version 16.0
[    20.307] (II) Using input driver 'evdev' for 'Power Button'
[    20.307] (**) Power Button: always reports core events
[    20.307] (**) evdev: Power Button: Device: "/dev/input/event8"
[    20.307] (--) evdev: Power Button: Vendor 0 Product 0x1
[    20.307] (--) evdev: Power Button: Found keys
[    20.307] (II) evdev: Power Button: Configuring as keyboard
[    20.307] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input8/event8"
[    20.307] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    20.307] (**) Option "xkb_rules" "evdev"
[    20.307] (**) Option "xkb_model" "evdev"
[    20.307] (**) Option "xkb_layout" "us"
[    20.335] (II) config/udev: Adding input device Video Bus (/dev/input/event13)
[    20.335] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    20.335] (II) Using input driver 'evdev' for 'Video Bus'
[    20.335] (**) Video Bus: always reports core events
[    20.335] (**) evdev: Video Bus: Device: "/dev/input/event13"
[    20.335] (--) evdev: Video Bus: Vendor 0 Product 0x6
[    20.335] (--) evdev: Video Bus: Found keys
[    20.335] (II) evdev: Video Bus: Configuring as keyboard
[    20.335] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input13/event13"
[    20.335] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[    20.336] (**) Option "xkb_rules" "evdev"
[    20.336] (**) Option "xkb_model" "evdev"
[    20.336] (**) Option "xkb_layout" "us"
[    20.337] (II) config/udev: Adding input device Power Button (/dev/input/event6)
[    20.337] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    20.337] (II) Using input driver 'evdev' for 'Power Button'
[    20.337] (**) Power Button: always reports core events
[    20.337] (**) evdev: Power Button: Device: "/dev/input/event6"
[    20.337] (--) evdev: Power Button: Vendor 0 Product 0x1
[    20.337] (--) evdev: Power Button: Found keys
[    20.337] (II) evdev: Power Button: Configuring as keyboard
[    20.337] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input6/event6"
[    20.337] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[    20.337] (**) Option "xkb_rules" "evdev"
[    20.337] (**) Option "xkb_model" "evdev"
[    20.337] (**) Option "xkb_layout" "us"
[    20.338] (II) config/udev: Adding input device Lid Switch (/dev/input/event5)
[    20.338] (II) No input driver specified, ignoring this device.
[    20.338] (II) This device may have been added with another device file.
[    20.339] (II) config/udev: Adding input device Sleep Button (/dev/input/event7)
[    20.339] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[    20.339] (II) Using input driver 'evdev' for 'Sleep Button'
[    20.339] (**) Sleep Button: always reports core events
[    20.339] (**) evdev: Sleep Button: Device: "/dev/input/event7"
[    20.339] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[    20.339] (--) evdev: Sleep Button: Found keys
[    20.339] (II) evdev: Sleep Button: Configuring as keyboard
[    20.339] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input7/event7"
[    20.339] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[    20.339] (**) Option "xkb_rules" "evdev"
[    20.339] (**) Option "xkb_model" "evdev"
[    20.339] (**) Option "xkb_layout" "us"
[    20.340] (II) config/udev: Adding input device Logitech USB-PS/2 Optical Mouse (/dev/input/event1)
[    20.340] (**) Logitech USB-PS/2 Optical Mouse: Applying InputClass "evdev pointer catchall"
[    20.340] (II) Using input driver 'evdev' for 'Logitech USB-PS/2 Optical Mouse'
[    20.340] (**) Logitech USB-PS/2 Optical Mouse: always reports core events
[    20.340] (**) evdev: Logitech USB-PS/2 Optical Mouse: Device: "/dev/input/event1"
[    20.340] (--) evdev: Logitech USB-PS/2 Optical Mouse: Vendor 0x46d Product 0xc01e
[    20.340] (--) evdev: Logitech USB-PS/2 Optical Mouse: Found 12 mouse buttons
[    20.340] (--) evdev: Logitech USB-PS/2 Optical Mouse: Found scroll wheel(s)
[    20.340] (--) evdev: Logitech USB-PS/2 Optical Mouse: Found relative axes
[    20.340] (--) evdev: Logitech USB-PS/2 Optical Mouse: Found x and y relative axes
[    20.340] (II) evdev: Logitech USB-PS/2 Optical Mouse: Configuring as mouse
[    20.340] (II) evdev: Logitech USB-PS/2 Optical Mouse: Adding scrollwheel support
[    20.340] (**) evdev: Logitech USB-PS/2 Optical Mouse: YAxisMapping: buttons 4 and 5
[    20.340] (**) evdev: Logitech USB-PS/2 Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    20.341] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2.1/1-1.2.1:1.0/input/input1/event1"
[    20.341] (II) XINPUT: Adding extended input device "Logitech USB-PS/2 Optical Mouse" (type: MOUSE, id 10)
[    20.341] (II) evdev: Logitech USB-PS/2 Optical Mouse: initialized for relative axes.
[    20.341] (**) Logitech USB-PS/2 Optical Mouse: (accel) keeping acceleration scheme 1
[    20.341] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration profile 0
[    20.341] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration factor: 2.000
[    20.341] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration threshold: 4
[    20.342] (II) config/udev: Adding input device Logitech USB-PS/2 Optical Mouse (/dev/input/mouse0)
[    20.342] (II) No input driver specified, ignoring this device.
[    20.342] (II) This device may have been added with another device file.
[    20.342] (II) config/udev: Adding input device Gaming Keyboard (/dev/input/event2)
[    20.342] (**) Gaming Keyboard: Applying InputClass "evdev keyboard catchall"
[    20.343] (II) Using input driver 'evdev' for 'Gaming Keyboard'
[    20.343] (**) Gaming Keyboard: always reports core events
[    20.343] (**) evdev: Gaming Keyboard: Device: "/dev/input/event2"
[    20.343] (--) evdev: Gaming Keyboard: Vendor 0x46d Product 0xc221
[    20.343] (--) evdev: Gaming Keyboard: Found keys
[    20.343] (II) evdev: Gaming Keyboard: Configuring as keyboard
[    20.343] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2.2/1-1.2.2.1/1-1.2.2.1:1.0/input/input2/event2"
[    20.343] (II) XINPUT: Adding extended input device "Gaming Keyboard" (type: KEYBOARD, id 11)
[    20.343] (**) Option "xkb_rules" "evdev"
[    20.343] (**) Option "xkb_model" "evdev"
[    20.343] (**) Option "xkb_layout" "us"
[    20.344] (II) config/udev: Adding input device Gaming Keyboard (/dev/input/event3)
[    20.344] (**) Gaming Keyboard: Applying InputClass "evdev keyboard catchall"
[    20.344] (II) Using input driver 'evdev' for 'Gaming Keyboard'
[    20.344] (**) Gaming Keyboard: always reports core events
[    20.344] (**) evdev: Gaming Keyboard: Device: "/dev/input/event3"
[    20.344] (--) evdev: Gaming Keyboard: Vendor 0x46d Product 0xc221
[    20.344] (--) evdev: Gaming Keyboard: Found keys
[    20.344] (II) evdev: Gaming Keyboard: Configuring as keyboard
[    20.344] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2.2/1-1.2.2.1/1-1.2.2.1:1.1/input/input3/event3"
[    20.344] (II) XINPUT: Adding extended input device "Gaming Keyboard" (type: KEYBOARD, id 12)
[    20.344] (**) Option "xkb_rules" "evdev"
[    20.344] (**) Option "xkb_model" "evdev"
[    20.344] (**) Option "xkb_layout" "us"
[    20.345] (II) config/udev: Adding input device G15 Keyboard G15 Keyboard (/dev/input/event4)
[    20.345] (**) G15 Keyboard G15 Keyboard: Applying InputClass "evdev keyboard catchall"
[    20.346] (II) Using input driver 'evdev' for 'G15 Keyboard G15 Keyboard'
[    20.346] (**) G15 Keyboard G15 Keyboard: always reports core events
[    20.346] (**) evdev: G15 Keyboard G15 Keyboard: Device: "/dev/input/event4"
[    20.346] (--) evdev: G15 Keyboard G15 Keyboard: Vendor 0x46d Product 0xc222
[    20.346] (--) evdev: G15 Keyboard G15 Keyboard: Found keys
[    20.346] (II) evdev: G15 Keyboard G15 Keyboard: Configuring as keyboard
[    20.346] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2.2/1-1.2.2.4/1-1.2.2.4:1.0/input/input4/event4"
[    20.346] (II) XINPUT: Adding extended input device "G15 Keyboard G15 Keyboard" (type: KEYBOARD, id 13)
[    20.346] (**) Option "xkb_rules" "evdev"
[    20.346] (**) Option "xkb_model" "evdev"
[    20.346] (**) Option "xkb_layout" "us"
[    20.346] (II) config/udev: Adding input device Laptop_Integrated_Webcam_FHD (/dev/input/event9)
[    20.346] (**) Laptop_Integrated_Webcam_FHD: Applying InputClass "evdev keyboard catchall"
[    20.346] (II) Using input driver 'evdev' for 'Laptop_Integrated_Webcam_FHD'
[    20.347] (**) Laptop_Integrated_Webcam_FHD: always reports core events
[    20.347] (**) evdev: Laptop_Integrated_Webcam_FHD: Device: "/dev/input/event9"
[    20.347] (--) evdev: Laptop_Integrated_Webcam_FHD: Vendor 0x1bcf Product 0x2b83
[    20.347] (--) evdev: Laptop_Integrated_Webcam_FHD: Found keys
[    20.347] (II) evdev: Laptop_Integrated_Webcam_FHD: Configuring as keyboard
[    20.347] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.0/input/input9/event9"
[    20.347] (II) XINPUT: Adding extended input device "Laptop_Integrated_Webcam_FHD" (type: KEYBOARD, id 14)
[    20.347] (**) Option "xkb_rules" "evdev"
[    20.347] (**) Option "xkb_model" "evdev"
[    20.347] (**) Option "xkb_layout" "us"
[    20.347] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event14)
[    20.347] (II) No input driver specified, ignoring this device.
[    20.347] (II) This device may have been added with another device file.
[    20.347] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=8 (/dev/input/event15)
[    20.347] (II) No input driver specified, ignoring this device.
[    20.347] (II) This device may have been added with another device file.
[    20.347] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=7 (/dev/input/event16)
[    20.347] (II) No input driver specified, ignoring this device.
[    20.347] (II) This device may have been added with another device file.
[    20.347] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event17)
[    20.347] (II) No input driver specified, ignoring this device.
[    20.347] (II) This device may have been added with another device file.
[    20.347] (II) config/udev: Adding input device HDA Intel PCH Dock Mic (/dev/input/event18)
[    20.347] (II) No input driver specified, ignoring this device.
[    20.347] (II) This device may have been added with another device file.
[    20.347] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event19)
[    20.347] (II) No input driver specified, ignoring this device.
[    20.347] (II) This device may have been added with another device file.
[    20.348] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event20)
[    20.348] (II) No input driver specified, ignoring this device.
[    20.348] (II) This device may have been added with another device file.
[    20.348] (II) config/udev: Adding input device HDA Intel PCH Dock Line Out (/dev/input/event21)
[    20.348] (II) No input driver specified, ignoring this device.
[    20.348] (II) This device may have been added with another device file.
[    20.348] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[    20.348] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[    20.348] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[    20.348] (**) AT Translated Set 2 keyboard: always reports core events
[    20.348] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[    20.348] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[    20.348] (--) evdev: AT Translated Set 2 keyboard: Found keys
[    20.348] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[    20.348] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[    20.348] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 15)
[    20.348] (**) Option "xkb_rules" "evdev"
[    20.348] (**) Option "xkb_model" "evdev"
[    20.348] (**) Option "xkb_layout" "us"
[    20.348] (II) config/udev: Adding input device DualPoint Stick (/dev/input/event11)
[    20.348] (**) DualPoint Stick: Applying InputClass "evdev pointer catchall"
[    20.348] (II) Using input driver 'evdev' for 'DualPoint Stick'
[    20.348] (**) DualPoint Stick: always reports core events
[    20.348] (**) evdev: DualPoint Stick: Device: "/dev/input/event11"
[    20.348] (--) evdev: DualPoint Stick: Vendor 0x2 Product 0x8
[    20.348] (--) evdev: DualPoint Stick: Found 3 mouse buttons
[    20.348] (--) evdev: DualPoint Stick: Found relative axes
[    20.348] (--) evdev: DualPoint Stick: Found x and y relative axes
[    20.348] (II) evdev: DualPoint Stick: Configuring as mouse
[    20.348] (**) evdev: DualPoint Stick: YAxisMapping: buttons 4 and 5
[    20.348] (**) evdev: DualPoint Stick: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    20.348] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input11/event11"
[    20.348] (II) XINPUT: Adding extended input device "DualPoint Stick" (type: MOUSE, id 16)
[    20.348] (II) evdev: DualPoint Stick: initialized for relative axes.
[    20.348] (**) DualPoint Stick: (accel) keeping acceleration scheme 1
[    20.348] (**) DualPoint Stick: (accel) acceleration profile 0
[    20.348] (**) DualPoint Stick: (accel) acceleration factor: 2.000
[    20.348] (**) DualPoint Stick: (accel) acceleration threshold: 4
[    20.349] (II) config/udev: Adding input device DualPoint Stick (/dev/input/mouse1)
[    20.349] (II) No input driver specified, ignoring this device.
[    20.349] (II) This device may have been added with another device file.
[    20.349] (II) config/udev: Adding input device AlpsPS/2 ALPS DualPoint TouchPad (/dev/input/event12)
[    20.349] (**) AlpsPS/2 ALPS DualPoint TouchPad: Applying InputClass "evdev touchpad catchall"
[    20.349] (**) AlpsPS/2 ALPS DualPoint TouchPad: Applying InputClass "touchpad catchall"
[    20.349] (II) LoadModule: "synaptics"
[    20.349] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[    20.353] (II) Module synaptics: vendor="X.Org Foundation"
[    20.353] 	compiled for 1.12.2, module version = 1.6.2
[    20.353] 	Module class: X.Org XInput Driver
[    20.353] 	ABI class: X.Org XInput driver, version 16.0
[    20.353] (II) Using input driver 'synaptics' for 'AlpsPS/2 ALPS DualPoint TouchPad'
[    20.353] (**) AlpsPS/2 ALPS DualPoint TouchPad: always reports core events
[    20.353] (**) Option "Device" "/dev/input/event12"
[    20.353] (II) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: ignoring touch events for semi-multitouch device
[    20.354] (--) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: x-axis range 0 - 2000
[    20.354] (--) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: y-axis range 0 - 1400
[    20.354] (--) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: pressure range 0 - 127
[    20.354] (II) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: device does not report finger width.
[    20.354] (--) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: buttons: left right middle double triple
[    20.354] (--) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: Vendor 0x2 Product 0x8
[    20.354] (--) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: invalid finger width range.  defaulting to 0 - 15
[    20.354] (**) Option "SHMConfig" "true"
[    20.354] (**) Option "VertEdgeScroll" "on"
[    20.354] (**) Option "HorizEdgeScroll" "on"
[    20.354] (**) Option "TapButton1" "1"
[    20.354] (**) Option "TapButton2" "2"
[    20.354] (**) Option "TapButton3" "3"
[    20.354] (--) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: touchpad found
[    20.354] (**) AlpsPS/2 ALPS DualPoint TouchPad: always reports core events
[    20.354] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input12/event12"
[    20.354] (II) XINPUT: Adding extended input device "AlpsPS/2 ALPS DualPoint TouchPad" (type: TOUCHPAD, id 17)
[    20.354] (**) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[    20.354] (**) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: MaxSpeed is now 1.75
[    20.354] (**) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: AccelFactor is now 0.082
[    20.354] (**) AlpsPS/2 ALPS DualPoint TouchPad: (accel) keeping acceleration scheme 1
[    20.354] (**) AlpsPS/2 ALPS DualPoint TouchPad: (accel) acceleration profile 1
[    20.354] (**) AlpsPS/2 ALPS DualPoint TouchPad: (accel) acceleration factor: 2.000
[    20.354] (**) AlpsPS/2 ALPS DualPoint TouchPad: (accel) acceleration threshold: 4
[    20.354] (--) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: touchpad found
[    20.354] (II) config/udev: Adding input device AlpsPS/2 ALPS DualPoint TouchPad (/dev/input/mouse2)
[    20.354] (II) No input driver specified, ignoring this device.
[    20.354] (II) This device may have been added with another device file.
[    20.354] (II) config/udev: Adding input device Dell WMI hotkeys (/dev/input/event10)
[    20.354] (**) Dell WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[    20.354] (II) Using input driver 'evdev' for 'Dell WMI hotkeys'
[    20.354] (**) Dell WMI hotkeys: always reports core events
[    20.354] (**) evdev: Dell WMI hotkeys: Device: "/dev/input/event10"
[    20.354] (--) evdev: Dell WMI hotkeys: Vendor 0 Product 0
[    20.354] (--) evdev: Dell WMI hotkeys: Found keys
[    20.354] (II) evdev: Dell WMI hotkeys: Configuring as keyboard
[    20.354] (**) Option "config_info" "udev:/sys/devices/virtual/input/input10/event10"
[    20.354] (II) XINPUT: Adding extended input device "Dell WMI hotkeys" (type: KEYBOARD, id 18)
[    20.354] (**) Option "xkb_rules" "evdev"
[    20.354] (**) Option "xkb_model" "evdev"
[    20.355] (**) Option "xkb_layout" "us"
[    90.019] (II) intel(0): EDID vendor "AIC", prod id 16784
[    90.019] (II) intel(0): Using hsync ranges from config file
[    90.019] (II) intel(0): Using vrefresh ranges from config file
[    90.019] (II) intel(0): Printing DDC gathered Modelines:
[    90.019] (II) intel(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[    90.019] (II) intel(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    90.019] (II) intel(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[    90.019] (II) intel(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[    90.019] (II) intel(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz e)
[    90.019] (II) intel(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)
[    90.019] (II) intel(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    90.019] (II) intel(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[    90.019] (II) intel(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[    90.019] (II) intel(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[    90.019] (II) intel(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[    90.019] (II) intel(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    90.019] (II) intel(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz e)
[    90.019] (II) intel(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[    90.019] (II) intel(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz e)
[    90.312] (II) intel(0): EDID vendor "AIC", prod id 16784
[    90.312] (II) intel(0): Using hsync ranges from config file
[    90.312] (II) intel(0): Using vrefresh ranges from config file
[    90.312] (II) intel(0): Printing DDC gathered Modelines:
[    90.312] (II) intel(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[    90.312] (II) intel(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    90.312] (II) intel(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[    90.312] (II) intel(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[    90.312] (II) intel(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz e)
[    90.312] (II) intel(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)
[    90.312] (II) intel(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    90.312] (II) intel(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[    90.312] (II) intel(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[    90.312] (II) intel(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[    90.312] (II) intel(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[    90.312] (II) intel(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    90.312] (II) intel(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz e)
[    90.312] (II) intel(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[    90.312] (II) intel(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz e)
[    90.473] (II) intel(0): Allocated new frame buffer 3200x1200 stride 12800, tiled
[    93.388] (II) intel(0): EDID vendor "AIC", prod id 16784
[    93.388] (II) intel(0): Using hsync ranges from config file
[    93.388] (II) intel(0): Using vrefresh ranges from config file
[    93.388] (II) intel(0): Printing DDC gathered Modelines:
[    93.388] (II) intel(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[    93.388] (II) intel(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    93.388] (II) intel(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[    93.388] (II) intel(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[    93.388] (II) intel(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz e)
[    93.388] (II) intel(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)
[    93.388] (II) intel(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    93.388] (II) intel(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[    93.388] (II) intel(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[    93.388] (II) intel(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[    93.388] (II) intel(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[    93.388] (II) intel(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    93.388] (II) intel(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz e)
[    93.388] (II) intel(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[    93.388] (II) intel(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz e)
[    93.662] (II) intel(0): EDID vendor "AIC", prod id 16784
[    93.662] (II) intel(0): Using hsync ranges from config file
[    93.662] (II) intel(0): Using vrefresh ranges from config file
[    93.662] (II) intel(0): Printing DDC gathered Modelines:
[    93.662] (II) intel(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[    93.662] (II) intel(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    93.662] (II) intel(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[    93.662] (II) intel(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[    93.662] (II) intel(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz e)
[    93.662] (II) intel(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)
[    93.662] (II) intel(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    93.662] (II) intel(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[    93.662] (II) intel(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[    93.662] (II) intel(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[    93.662] (II) intel(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[    93.662] (II) intel(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    93.662] (II) intel(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz e)
[    93.662] (II) intel(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[    93.662] (II) intel(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz e)

cat /etc/slim.conf

# Path, X server and arguments (if needed)
# Note: -xauth $authfile is automatically appended
default_path        /bin:/usr/bin:/usr/local/bin
default_xserver     /usr/bin/X
xserver_arguments -nolisten tcp vt07

# Commands for halt, login, etc.
halt_cmd            /sbin/shutdown -h now
reboot_cmd          /sbin/shutdown -r now
console_cmd         /usr/bin/xterm -C -fg white -bg black +sb -T "Console login" -e /bin/sh -c "/bin/cat /etc/issue; exec /bin/login"
#suspend_cmd        /usr/sbin/suspend

# Full path to the xauth binary
xauth_path         /usr/bin/xauth 

# Xauth file for server
authfile           /var/run/slim.auth


# Activate numlock when slim starts. Valid values: on|off
# numlock             on

# Hide the mouse cursor (note: does not work with some WMs).
# Valid values: true|false
# hidecursor          false

# This command is executed after a succesful login.
# you can place the %session and %theme variables
# to handle launching of specific commands in .xinitrc
# depending of chosen session and slim theme
#
# NOTE: if your system does not have bash you need
# to adjust the command according to your preferred shell,
# i.e. for freebsd use:
# login_cmd           exec /bin/sh - ~/.xinitrc %session
login_cmd           exec dbus-launch /bin/bash -login ~/.xinitrc %session

# Commands executed when starting and exiting a session.
# They can be used for registering a X11 session with
# sessreg. You can use the %user variable
#
# sessionstart_cmd	some command
# sessionstop_cmd	some command

# Start in daemon mode. Valid values: yes | no
# Note that this can be overriden by the command line
# options "-d" and "-nodaemon"
# daemon	yes

# Available sessions (first one is the default).
# The current chosen session name is replaced in the login_cmd
# above, so your login command can handle different sessions.
# see the xinitrc.sample file shipped with slim sources
sessions            xfce4,icewm-session,wmaker,blackbox

# Executed when pressing F11 (requires imagemagick)
screenshot_cmd      import -window root /slim.png

# welcome message. Available variables: %host, %domain
welcome_msg         Welcome to %host

# Session message. Prepended to the session name when pressing F1
# session_msg         Session: 

# shutdown / reboot messages
shutdown_msg       The system is halting...
reboot_msg         The system is rebooting...

# default user, leave blank or remove this line
# for avoid pre-loading the username.
default_user        houmles

# Focus the password field on start when default_user is set
# Set to "yes" to enable this feature
focus_password      yes

# Automatically login the default user (without entering
# the password. Set to "yes" to enable this feature
#auto_login          no


# current theme, use comma separated list to specify a set to 
# randomly choose from
current_theme       houmles

# Lock file
lockfile            /var/lock/slim.lock

# Log file
logfile             /var/log/slim.log

cat ~/.xinitrc

export DE=gnome
export GTK2_RC_FILES="$HOME/.gtkrc-2.0"

if [ -d /etc/X11/xinit/xinitrc.d ]; then
  for f in /etc/X11/xinit/xinitrc.d/*; do
    [ -x "$f" ] && . "$f"
  done
  unset f
fi

exec dbus-launch openbox-session

Last edited by houmles (2012-08-02 09:04:39)

Offline

#2 2012-08-01 16:34:33

x33a
Forum Fellow
Registered: 2009-08-15
Posts: 4,587

Re: [solved] slim - waiting for login screen

login_cmd           exec dbus-launch /bin/bash -login ~/.xinitrc %session

try the above without the dbus-launch bit.

Offline

#3 2012-08-01 19:43:55

houmles
Member
Registered: 2011-09-22
Posts: 7

Re: [solved] slim - waiting for login screen

Already tried that and it didn't help :\

Offline

#4 2012-08-01 20:49:31

houmles
Member
Registered: 2011-09-22
Posts: 7

Re: [solved] slim - waiting for login screen

Ok, problem could be maybe elsewhere than I thought.
I found slim does this when I start it manually by rc.d script.
When I disable it from daemons in rc.conf and try to start it by hand after clean boot it did exactly same behaviour.
What's different if it start from daemons or by rc.d script? I thought it did the same thing?

Offline

#5 2012-08-02 09:04:07

houmles
Member
Registered: 2011-09-22
Posts: 7

Re: [solved] slim - waiting for login screen

Finally, found it!
Problem is my .xinitrc was not executable smile
Werid that when starting slim automaticaly is not problem.

Offline

Board footer

Powered by FluxBB