You are not logged in.
- Topics: Active | Unanswered
#1 2012-08-16 06:07:47
- shohart
- Member
- Registered: 2011-05-19
- Posts: 39
[SOLVED] Archlinux not detecting full ammount of RAM (again)
Hello everyone!
i've got a problem similar to this one: https://bbs.archlinux.org/viewtopic.php?id=126170
i've tried brilliant solution by gabe.benson:
Well, I fixed it. I re-seated the RAM and rebooted, everything works fine now.
but got no result.
i have lenovo g580 laptop with 4 G of ram.
lshw -short | grep 'System\ Memory'
/0/28 memory 4GiB System Memory lshw | grep -A 8 bank
sudo lshw | grep -A 8 bank
*-bank:0
description: SODIMM DDR3 Synchronous 800 MHz (1,2 ns)
product: 16KTF51264HZ-1G6M1
vendor: Micron Technology
physical id: 0
serial: E962DADF
slot: DIMM0
size: 4GiB
width: 64 bits
--
*-bank:1
description: DIMM [empty]
product: Empty
vendor: Empty
physical id: 1
serial: Empty
slot: DIMM1but system says that i hve only 3 G of ram:
cat /proc/meminfo | grep -i memtotal
MemTotal: 3018460 kBfree -m
total used free shared buffers cached
Mem: 2947 900 2047 0 13 455
-/+ buffers/cache: 430 2517
Swap: 956 0 956my RAM is recognized in BIOS and was recognized in win7 when win7 was still installed...
here are some info
uname -a
Linux architect 3.4.8-1-ARCH #1 SMP PREEMPT Thu Aug 9 19:24:46 UTC 2012 i686 GNU/Linuxdmesg full output
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.4.8-1-ARCH (tobias@T-POWA-LX) (gcc version 4.7.1 20120721 (prerelease) (GCC) ) #1 SMP PREEMPT Thu Aug 9 19:24:46 UTC 2012
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009d800 (usable)
[ 0.000000] BIOS-e820: 000000000009d800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 0000000020000000 (usable)
[ 0.000000] BIOS-e820: 0000000020000000 - 0000000020200000 (reserved)
[ 0.000000] BIOS-e820: 0000000020200000 - 0000000040004000 (usable)
[ 0.000000] BIOS-e820: 0000000040004000 - 0000000040005000 (reserved)
[ 0.000000] BIOS-e820: 0000000040005000 - 00000000baabf000 (usable)
[ 0.000000] BIOS-e820: 00000000baabf000 - 00000000baebf000 (reserved)
[ 0.000000] BIOS-e820: 00000000baebf000 - 00000000bafbf000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bafbf000 - 00000000bafff000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bafff000 - 00000000bb000000 (usable)
[ 0.000000] BIOS-e820: 00000000bb000000 - 00000000bfa00000 (reserved)
[ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
[ 0.000000] BIOS-e820: 00000000feb00000 - 00000000feb04000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed10000 - 00000000fed1a000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 000000013f600000 (usable)
[ 0.000000] e820 remove range: 0000000100000000 - ffffffffffffffff (usable)
[ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
[ 0.000000] user-defined physical RAM map:
[ 0.000000] user: 0000000000000000 - 000000000009d800 (usable)
[ 0.000000] user: 000000000009d800 - 00000000000a0000 (reserved)
[ 0.000000] user: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] user: 0000000000100000 - 0000000020000000 (usable)
[ 0.000000] user: 0000000020000000 - 0000000020200000 (reserved)
[ 0.000000] user: 0000000020200000 - 0000000040004000 (usable)
[ 0.000000] user: 0000000040004000 - 0000000040005000 (reserved)
[ 0.000000] user: 0000000040005000 - 00000000baabf000 (usable)
[ 0.000000] user: 00000000baabf000 - 00000000baebf000 (reserved)
[ 0.000000] user: 00000000baebf000 - 00000000bafbf000 (ACPI NVS)
[ 0.000000] user: 00000000bafbf000 - 00000000bafff000 (ACPI data)
[ 0.000000] user: 00000000bafff000 - 00000000bb000000 (usable)
[ 0.000000] user: 00000000bb000000 - 00000000bfa00000 (reserved)
[ 0.000000] user: 00000000f0000000 - 00000000f4000000 (reserved)
[ 0.000000] user: 00000000feb00000 - 00000000feb04000 (reserved)
[ 0.000000] user: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] user: 00000000fed10000 - 00000000fed1a000 (reserved)
[ 0.000000] user: 00000000fed1c000 - 00000000fed20000 (reserved)
[ 0.000000] user: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] user: 00000000ffb80000 - 0000000100000000 (reserved)
[ 0.000000] DMI 2.7 present.
[ 0.000000] DMI: LENOVO Lenovo G580/Product Name, BIOS 5ECN32WW(V2.02) 04/24/2012
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] last_pfn = 0xbb000 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-E7FFF write-protect
[ 0.000000] E8000-EFFFF write-combining
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 080000000 mask FC0000000 write-back
[ 0.000000] 2 base 0BB000000 mask FFF000000 uncachable
[ 0.000000] 3 base 0BC000000 mask FFC000000 uncachable
[ 0.000000] 4 base 0FFC00000 mask FFFC00000 write-protect
[ 0.000000] 5 base 100000000 mask FC0000000 write-back
[ 0.000000] 6 base 13F600000 mask FFFE00000 uncachable
[ 0.000000] 7 base 13F800000 mask FFF800000 uncachable
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] found SMP MP-table at [c00fe1b0] fe1b0
[ 0.000000] initial memory mapped : 0 - 01c00000
[ 0.000000] Base memory trampoline at [c0099000] 99000 size 16384
[ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0037400000 page 2M
[ 0.000000] 0037400000 - 00377fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 377fe000 @ 1bfb000-1c00000
[ 0.000000] RAMDISK: 37abc000 - 37d56000
[ 0.000000] Allocated new RAMDISK: 37564000 - 377fda9c
[ 0.000000] Move RAMDISK from 0000000037abc000 - 0000000037d55a9b to 37564000 - 377fda9b
[ 0.000000] ACPI: RSDP 000fe020 00024 (v02 LENOVO)
[ 0.000000] ACPI: XSDT baffe210 00094 (v01 LENOVO CB-01 00000001 01000013)
[ 0.000000] ACPI: FACP baffb000 000F4 (v04 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: DSDT bafee000 09755 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: FACS bafbb000 00040
[ 0.000000] ACPI: UEFI baffd000 00236 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: ASF! baffc000 000A5 (v32 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: HPET baffa000 00038 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: APIC baff9000 0008C (v02 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: MCFG baff8000 0003C (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: SLIC bafed000 00176 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: SSDT bafec000 006FE (v01 LENOVO CB-01 00001000 ACPI 00040000)
[ 0.000000] ACPI: BOOT bafea000 00028 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: ASPT bafe5000 00034 (v07 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: FPDT bafe3000 00044 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: SSDT bafe2000 00968 (v01 LENOVO CB-01 00003000 ACPI 00040000)
[ 0.000000] ACPI: SSDT bafe1000 00A92 (v01 LENOVO CB-01 00003000 ACPI 00040000)
[ 0.000000] ACPI: SSDT bafdf000 01EDD (v01 LENOVO CB-01 00001000 ACPI 00040000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 2104MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000377fe
[ 0.000000] HighMem 0x000377fe -> 0x000bb000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] Early memory PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009d
[ 0.000000] 0: 0x00000100 -> 0x00020000
[ 0.000000] 0: 0x00020200 -> 0x00040004
[ 0.000000] 0: 0x00040005 -> 0x000baabf
[ 0.000000] 0: 0x000bafff -> 0x000bb000
[ 0.000000] On node 0 totalpages: 763980
[ 0.000000] free_area_init_node: node 0, pgdat c151ec80, node_mem_map f5e03200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3949 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 220974 pages, LIFO batch:31
[ 0.000000] HighMem zone: 4209 pages used for memmap
[ 0.000000] HighMem zone: 533072 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 8 CPUs, 4 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000020200000
[ 0.000000] Allocating PCI resources starting at bfa00000 (gap: bfa00000:30600000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 13 pages/cpu @f5d89000 s31424 r0 d21824 u53248
[ 0.000000] pcpu-alloc: s31424 r0 d21824 u53248 alloc=13*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 757995
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=fe7ca6ad-90bf-40d6-9d16-836f808ae890 ro ro quiet splash init=/bin/systemd mem=4G
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] allocated 6127488 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (000377fe:000bb000)
[ 0.000000] Memory: 3015272k/3063808k available (3810k kernel code, 40648k reserved, 1472k data, 524k init, 2149124k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
[ 0.000000] .init : 0xc1529000 - 0xc15ac000 ( 524 kB)
[ 0.000000] .data : 0xc13b8837 - 0xc1528840 (1472 kB)
[ 0.000000] .text : 0xc1000000 - 0xc13b8837 (3810 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] NR_IRQS:2304 nr_irqs:744 16
[ 0.000000] CPU 0 irqstacks, hard=f500a000 soft=f500c000
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.003333] Detected 2494.324 MHz processor.
[ 0.000001] Calibrating delay loop (skipped), value calculated using timer frequency.. 4990.50 BogoMIPS (lpj=8314413)
[ 0.000004] pid_max: default: 32768 minimum: 301
[ 0.000022] Security Framework initialized
[ 0.000025] AppArmor: AppArmor disabled by boot time parameter
[ 0.000035] Mount-cache hash table entries: 512
[ 0.000187] Initializing cgroup subsys cpuacct
[ 0.000188] Initializing cgroup subsys memory
[ 0.000193] Initializing cgroup subsys devices
[ 0.000195] Initializing cgroup subsys freezer
[ 0.000196] Initializing cgroup subsys net_cls
[ 0.000198] Initializing cgroup subsys blkio
[ 0.000221] CPU: Physical Processor ID: 0
[ 0.000222] CPU: Processor Core ID: 0
[ 0.000226] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.000227] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.000948] mce: CPU supports 7 MCE banks
[ 0.000958] CPU0: Thermal monitoring enabled (TM1)
[ 0.000965] using mwait in idle threads.
[ 0.001745] ACPI: Core revision 20120320
[ 0.020574] ftrace: allocating 16939 entries in 34 pages
[ 0.031595] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.032013] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.064975] CPU0: Intel(R) Core(TM) i5-3210M CPU @ 2.50GHz stepping 09
[ 0.170127] Performance Events: PEBS fmt1+, generic architected perfmon, Intel PMU driver.
[ 0.170132] ... version: 3
[ 0.170133] ... bit width: 48
[ 0.170134] ... generic registers: 4
[ 0.170135] ... value mask: 0000ffffffffffff
[ 0.170136] ... max period: 000000007fffffff
[ 0.170137] ... fixed-purpose events: 3
[ 0.170139] ... event mask: 000000070000000f
[ 0.190193] NMI watchdog: enabled, takes one hw-pmu counter.
[ 0.210090] CPU 1 irqstacks, hard=f5164000 soft=f5166000
[ 0.210093] Booting Node 0, Processors #1
[ 0.220329] Initializing CPU#1
[ 0.223930] NMI watchdog: enabled, takes one hw-pmu counter.
[ 0.236742] CPU 2 irqstacks, hard=f5172000 soft=f5174000
[ 0.236744] #2
[ 0.247052] Initializing CPU#2
[ 0.250659] NMI watchdog: enabled, takes one hw-pmu counter.
[ 0.263373] CPU 3 irqstacks, hard=f5180000 soft=f5182000
[ 0.263374] #3
[ 0.273681] Initializing CPU#3
[ 0.277289] NMI watchdog: enabled, takes one hw-pmu counter.
[ 0.277313] Brought up 4 CPUs
[ 0.277314] Total of 4 processors activated (19962.03 BogoMIPS).
[ 0.280644] devtmpfs: initialized
[ 0.280809] PM: Registering ACPI NVS region [mem 0xbaebf000-0xbafbefff] (1048576 bytes)
[ 0.281540] NET: Registered protocol family 16
[ 0.281663] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.281665] ACPI: bus type pci registered
[ 0.281715] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[ 0.281718] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
[ 0.281719] PCI: Using MMCONFIG for extended config space
[ 0.281720] PCI: Using configuration type 1 for base access
[ 0.281825] mtrr: your CPUs had inconsistent variable MTRR settings
[ 0.281827] mtrr: probably your BIOS does not setup all CPUs.
[ 0.281828] mtrr: corrected configuration.
[ 0.282156] bio: create slab <bio-0> at 0
[ 0.282198] ACPI: Added _OSI(Module Device)
[ 0.282200] ACPI: Added _OSI(Processor Device)
[ 0.282201] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.282203] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.283613] ACPI: EC: Look up EC in DSDT
[ 0.285039] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.287544] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.288407] ACPI: SSDT bae18018 0083B (v01 PmRef Cpu0Cst 00003001 INTL 20100121)
[ 0.288766] ACPI: Dynamic OEM Table Load:
[ 0.288768] ACPI: SSDT (null) 0083B (v01 PmRef Cpu0Cst 00003001 INTL 20100121)
[ 0.288969] ACPI: SSDT bae19a98 00303 (v01 PmRef ApIst 00003000 INTL 20100121)
[ 0.289350] ACPI: Dynamic OEM Table Load:
[ 0.289352] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20100121)
[ 0.289436] ACPI: SSDT bae17d98 00119 (v01 PmRef ApCst 00003000 INTL 20100121)
[ 0.289789] ACPI: Dynamic OEM Table Load:
[ 0.289791] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20100121)
[ 0.290616] ACPI: Interpreter enabled
[ 0.290621] ACPI: (supports S0 S3 S4 S5)
[ 0.290639] ACPI: Using IOAPIC for interrupt routing
[ 0.412595] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[ 0.412750] ACPI: No dock devices found.
[ 0.412754] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.413003] \_SB_.PCI0:_OSC invalid UUID
[ 0.413004] _OSC request data:1 8 1f
[ 0.413007] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 0.413400] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.413402] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.413404] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.413406] pci_root PNP0A08:00: host bridge window [mem 0xbfa00000-0xfeafffff]
[ 0.413431] PCI host bridge to bus 0000:00
[ 0.413433] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.413434] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.413436] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.413438] pci_bus 0000:00: root bus resource [mem 0xbfa00000-0xfeafffff]
[ 0.413445] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
[ 0.413479] pci 0000:00:01.0: [8086:0151] type 01 class 0x060400
[ 0.413509] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.413522] pci 0000:00:01.1: [8086:0155] type 01 class 0x060400
[ 0.413550] pci 0000:00:01.1: PME# supported from D0 D3hot D3cold
[ 0.413567] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
[ 0.413578] pci 0000:00:02.0: reg 10: [mem 0xd3000000-0xd33fffff 64bit]
[ 0.413584] pci 0000:00:02.0: reg 18: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.413589] pci 0000:00:02.0: reg 20: [io 0x4000-0x403f]
[ 0.413640] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
[ 0.413662] pci 0000:00:14.0: reg 10: [mem 0xd3600000-0xd360ffff 64bit]
[ 0.413733] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.413756] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
[ 0.413779] pci 0000:00:16.0: reg 10: [mem 0xd3614000-0xd361400f 64bit]
[ 0.413855] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.413889] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
[ 0.414140] pci 0000:00:1a.0: reg 10: [mem 0xd3619000-0xd36193ff]
[ 0.415551] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.415579] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
[ 0.415594] pci 0000:00:1b.0: reg 10: [mem 0xd3610000-0xd3613fff 64bit]
[ 0.415662] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.415685] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
[ 0.415764] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.415789] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400
[ 0.415868] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.415902] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
[ 0.416142] pci 0000:00:1d.0: reg 10: [mem 0xd3618000-0xd36183ff]
[ 0.417555] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.417582] pci 0000:00:1f.0: [8086:1e59] type 00 class 0x060100
[ 0.417707] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
[ 0.417725] pci 0000:00:1f.2: reg 10: [io 0x4088-0x408f]
[ 0.417733] pci 0000:00:1f.2: reg 14: [io 0x4094-0x4097]
[ 0.417741] pci 0000:00:1f.2: reg 18: [io 0x4080-0x4087]
[ 0.417750] pci 0000:00:1f.2: reg 1c: [io 0x4090-0x4093]
[ 0.417758] pci 0000:00:1f.2: reg 20: [io 0x4060-0x407f]
[ 0.417766] pci 0000:00:1f.2: reg 24: [mem 0xd3617000-0xd36177ff]
[ 0.417811] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.417830] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
[ 0.417846] pci 0000:00:1f.3: reg 10: [mem 0xd3615000-0xd36150ff 64bit]
[ 0.417867] pci 0000:00:1f.3: reg 20: [io 0x4040-0x405f]
[ 0.417922] pci 0000:01:00.0: [10de:1140] type 00 class 0x030200
[ 0.417933] pci 0000:01:00.0: reg 10: [mem 0xd2000000-0xd2ffffff]
[ 0.417943] pci 0000:01:00.0: reg 14: [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.417953] pci 0000:01:00.0: reg 1c: [mem 0xd0000000-0xd1ffffff 64bit pref]
[ 0.417960] pci 0000:01:00.0: reg 24: [io 0x3000-0x307f]
[ 0.417968] pci 0000:01:00.0: reg 30: [mem 0xfff80000-0xffffffff pref]
[ 0.423139] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.423155] pci 0000:00:01.0: bridge window [io 0x3000-0x3fff]
[ 0.423158] pci 0000:00:01.0: bridge window [mem 0xd2000000-0xd2ffffff]
[ 0.423161] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[ 0.423180] pci 0000:00:01.1: PCI bridge to [bus 02-02]
[ 0.423362] pci 0000:03:00.0: [1969:1090] type 00 class 0x020000
[ 0.423510] pci 0000:03:00.0: reg 10: [mem 0xd3500000-0xd353ffff 64bit]
[ 0.423568] pci 0000:03:00.0: reg 18: [io 0x2000-0x207f]
[ 0.424132] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.429854] pci 0000:00:1c.0: PCI bridge to [bus 03-03]
[ 0.429858] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 0.429863] pci 0000:00:1c.0: bridge window [mem 0xd3500000-0xd35fffff]
[ 0.429934] pci 0000:04:00.0: [168c:002b] type 00 class 0x028000
[ 0.429961] pci 0000:04:00.0: reg 10: [mem 0xd3400000-0xd340ffff 64bit]
[ 0.430091] pci 0000:04:00.0: supports D1
[ 0.430092] pci 0000:04:00.0: PME# supported from D0 D1 D3hot
[ 0.436456] pci 0000:00:1c.1: PCI bridge to [bus 04-04]
[ 0.436477] pci 0000:00:1c.1: bridge window [mem 0xd3400000-0xd34fffff]
[ 0.436498] pci_bus 0000:00: on NUMA node 0
[ 0.436500] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.436604] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 0.436627] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[ 0.436661] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG0._PRT]
[ 0.436683] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG1._PRT]
[ 0.436741] \_SB_.PCI0:_OSC invalid UUID
[ 0.436743] _OSC request data:1 1f 1f
[ 0.436746] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.436777] \_SB_.PCI0:_OSC invalid UUID
[ 0.436778] _OSC request data:1 0 1d
[ 0.436781] pci0000:00: ACPI _OSC request failed (AE_ERROR), returned control mask: 0x1d
[ 0.436783] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.439162] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[ 0.439198] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[ 0.439233] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.439267] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[ 0.439301] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.439336] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
[ 0.439372] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
[ 0.439407] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[ 0.439462] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.439466] vgaarb: loaded
[ 0.439467] vgaarb: bridge control possible 0000:00:02.0
[ 0.439493] PCI: Using ACPI for IRQ routing
[ 0.441016] PCI: pci_cache_line_size set to 64 bytes
[ 0.441100] reserve RAM buffer: 000000000009d800 - 000000000009ffff
[ 0.441102] reserve RAM buffer: 0000000040004000 - 0000000043ffffff
[ 0.441104] reserve RAM buffer: 00000000baabf000 - 00000000bbffffff
[ 0.441106] reserve RAM buffer: 00000000bb000000 - 00000000bbffffff
[ 0.441172] NetLabel: Initializing
[ 0.441174] NetLabel: domain hash size = 128
[ 0.441175] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.441184] NetLabel: unlabeled traffic allowed by default
[ 0.441221] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.441226] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.444239] Switching to clocksource hpet
[ 0.448544] pnp: PnP ACPI init
[ 0.448556] ACPI: bus type pnp registered
[ 0.448788] pnp 00:00: [bus 00-3e]
[ 0.448791] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.448792] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.448794] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.448796] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.448797] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[ 0.448799] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[ 0.448800] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[ 0.448802] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[ 0.448803] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[ 0.448805] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[ 0.448807] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[ 0.448808] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[ 0.448810] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[ 0.448811] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[ 0.448813] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[ 0.448814] pnp 00:00: [mem 0x000ec000-0x000effff window]
[ 0.448816] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[ 0.448817] pnp 00:00: [mem 0xbfa00000-0xfeafffff window]
[ 0.448819] pnp 00:00: [mem 0x00010000-0x0001ffff window]
[ 0.448861] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.448872] pnp 00:01: [io 0x0000-0x001f]
[ 0.448873] pnp 00:01: [io 0x0081-0x0091]
[ 0.448874] pnp 00:01: [io 0x0093-0x009f]
[ 0.448876] pnp 00:01: [io 0x00c0-0x00df]
[ 0.448877] pnp 00:01: [dma 4]
[ 0.448895] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.448901] pnp 00:02: [mem 0xff010000-0xffffffff]
[ 0.448916] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.448969] pnp 00:03: [mem 0xfed00000-0xfed003ff]
[ 0.448985] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.448991] pnp 00:04: [io 0x00f0]
[ 0.448999] pnp 00:04: [irq 13]
[ 0.449016] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.449024] pnp 00:05: [io 0x002e-0x002f]
[ 0.449025] pnp 00:05: [io 0x004e-0x004f]
[ 0.449027] pnp 00:05: [io 0x0061]
[ 0.449028] pnp 00:05: [io 0x0063]
[ 0.449029] pnp 00:05: [io 0x0065]
[ 0.449030] pnp 00:05: [io 0x0067]
[ 0.449032] pnp 00:05: [io 0x0070]
[ 0.449033] pnp 00:05: [io 0x0080]
[ 0.449034] pnp 00:05: [io 0x0092]
[ 0.449035] pnp 00:05: [io 0x00b2-0x00b3]
[ 0.449037] pnp 00:05: [io 0x0680-0x069f]
[ 0.449038] pnp 00:05: [io 0x1000-0x100f]
[ 0.449039] pnp 00:05: [io 0xffff]
[ 0.449041] pnp 00:05: [io 0xffff]
[ 0.449042] pnp 00:05: [io 0x0400-0x0453]
[ 0.449043] pnp 00:05: [io 0x0458-0x047f]
[ 0.449045] pnp 00:05: [io 0x0500-0x057f]
[ 0.449046] pnp 00:05: [io 0x164e-0x164f]
[ 0.449047] pnp 00:05: [io 0xfd60-0xfd63]
[ 0.449079] system 00:05: [io 0x0680-0x069f] has been reserved
[ 0.449081] system 00:05: [io 0x1000-0x100f] has been reserved
[ 0.449083] system 00:05: [io 0xffff] has been reserved
[ 0.449085] system 00:05: [io 0xffff] has been reserved
[ 0.449087] system 00:05: [io 0x0400-0x0453] has been reserved
[ 0.449088] system 00:05: [io 0x0458-0x047f] has been reserved
[ 0.449090] system 00:05: [io 0x0500-0x057f] has been reserved
[ 0.449092] system 00:05: [io 0x164e-0x164f] has been reserved
[ 0.449094] system 00:05: [io 0xfd60-0xfd63] has been reserved
[ 0.449096] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.449102] pnp 00:06: [io 0x0070-0x0077]
[ 0.449106] pnp 00:06: [irq 8]
[ 0.449123] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.449141] pnp 00:07: [io 0x0454-0x0457]
[ 0.449165] system 00:07: [io 0x0454-0x0457] has been reserved
[ 0.449168] system 00:07: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.449175] pnp 00:08: [io 0x0060]
[ 0.449177] pnp 00:08: [io 0x0064]
[ 0.449181] pnp 00:08: [irq 1]
[ 0.449197] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.449238] pnp 00:09: [irq 12]
[ 0.449257] pnp 00:09: Plug and Play ACPI device, IDs ETD0613 ETD0001 PNP0f13 (active)
[ 0.507625] pnp 00:0a: [mem 0xfed1c000-0xfed1ffff]
[ 0.507627] pnp 00:0a: [mem 0xfed10000-0xfed17fff]
[ 0.507629] pnp 00:0a: [mem 0xfed18000-0xfed18fff]
[ 0.507630] pnp 00:0a: [mem 0xfed19000-0xfed19fff]
[ 0.507631] pnp 00:0a: [mem 0xf0000000-0xf3ffffff]
[ 0.507633] pnp 00:0a: [mem 0xfed20000-0xfed3ffff]
[ 0.507634] pnp 00:0a: [mem 0xfed90000-0xfed93fff]
[ 0.507636] pnp 00:0a: [mem 0xff000000-0xff000fff]
[ 0.507637] pnp 00:0a: [mem 0xff010000-0xffffffff]
[ 0.507639] pnp 00:0a: [mem 0xfee00000-0xfeefffff]
[ 0.507640] pnp 00:0a: [mem 0xbfa00000-0xbfa00fff]
[ 0.507671] system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.507673] system 00:0a: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.507675] system 00:0a: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.507677] system 00:0a: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.507679] system 00:0a: [mem 0xf0000000-0xf3ffffff] has been reserved
[ 0.507681] system 00:0a: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.507683] system 00:0a: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.507685] system 00:0a: [mem 0xff000000-0xff000fff] has been reserved
[ 0.507687] system 00:0a: [mem 0xff010000-0xffffffff] could not be reserved
[ 0.507689] system 00:0a: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.507691] system 00:0a: [mem 0xbfa00000-0xbfa00fff] has been reserved
[ 0.507693] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.507937] pnp 00:0b: [mem 0x20000000-0x201fffff]
[ 0.507939] pnp 00:0b: [mem 0x40004000-0x40004fff]
[ 0.507980] system 00:0b: [mem 0x20000000-0x201fffff] has been reserved
[ 0.507981] system 00:0b: [mem 0x40004000-0x40004fff] has been reserved
[ 0.507984] system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.507998] pnp: PnP ACPI: found 12 devices
[ 0.507999] ACPI: ACPI bus type pnp unregistered
[ 0.544171] pci 0000:01:00.0: no compatible bridge window for [mem 0xfff80000-0xffffffff pref]
[ 0.544202] pci 0000:01:00.0: BAR 6: can't assign mem pref (size 0x80000)
[ 0.544204] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.544207] pci 0000:00:01.0: bridge window [io 0x3000-0x3fff]
[ 0.544209] pci 0000:00:01.0: bridge window [mem 0xd2000000-0xd2ffffff]
[ 0.544212] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[ 0.544215] pci 0000:00:01.1: PCI bridge to [bus 02-02]
[ 0.544221] pci 0000:00:1c.0: PCI bridge to [bus 03-03]
[ 0.544224] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 0.544229] pci 0000:00:1c.0: bridge window [mem 0xd3500000-0xd35fffff]
[ 0.544237] pci 0000:00:1c.1: PCI bridge to [bus 04-04]
[ 0.544242] pci 0000:00:1c.1: bridge window [mem 0xd3400000-0xd34fffff]
[ 0.544275] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.544277] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.544279] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.544281] pci_bus 0000:00: resource 7 [mem 0xbfa00000-0xfeafffff]
[ 0.544282] pci_bus 0000:01: resource 0 [io 0x3000-0x3fff]
[ 0.544284] pci_bus 0000:01: resource 1 [mem 0xd2000000-0xd2ffffff]
[ 0.544286] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref]
[ 0.544288] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff]
[ 0.544289] pci_bus 0000:03: resource 1 [mem 0xd3500000-0xd35fffff]
[ 0.544291] pci_bus 0000:04: resource 1 [mem 0xd3400000-0xd34fffff]
[ 0.544322] NET: Registered protocol family 2
[ 0.544358] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.544442] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.544615] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.544703] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.544705] TCP: reno registered
[ 0.544707] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.544711] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.544756] NET: Registered protocol family 1
[ 0.544767] pci 0000:00:02.0: Boot video device
[ 0.570851] PCI: CLS 64 bytes, default 64
[ 0.570880] Unpacking initramfs...
[ 0.619052] Freeing initrd memory: 2664k freed
[ 0.619338] Simple Boot Flag at 0x44 set to 0x1
[ 0.619589] apm: BIOS not found.
[ 0.619736] audit: initializing netlink socket (disabled)
[ 0.619749] type=2000 audit(1345095829.503:1): initialized
[ 0.619994] highmem bounce pool size: 64 pages
[ 0.619997] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.621206] VFS: Disk quotas dquot_6.5.2
[ 0.621241] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.621308] msgmni has been set to 1696
[ 0.621446] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.621472] io scheduler noop registered
[ 0.621474] io scheduler deadline registered
[ 0.621480] io scheduler cfq registered (default)
[ 0.621551] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 0.621602] pcieport 0000:00:01.1: irq 41 for MSI/MSI-X
[ 0.621760] vesafb: mode is 1366x768x32, linelength=5504, pages=0
[ 0.621762] vesafb: scrolling: redraw
[ 0.621764] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.622118] vesafb: framebuffer at 0xe0000000, mapped to 0xf8080000, using 4160k, total 4160k
[ 0.622154] fbcon: VESA VGA (fb0) is primary device
[ 0.689580] Console: switching to colour frame buffer device 170x48
[ 0.756633] fb0: VESA VGA frame buffer device
[ 0.756646] intel_idle: does not run on family 6 model 58
[ 0.756664] GHES: HEST is not enabled!
[ 0.756672] isapnp: Scanning for PnP cards...
[ 1.069356] isapnp: No Plug & Play device found
[ 1.069400] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 1.069903] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:MSS4] at 0x60,0x64 irq 1,12
[ 1.084587] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.084595] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.084687] mousedev: PS/2 mouse device common for all mice
[ 1.084893] rtc_cmos 00:06: RTC can wake from S4
[ 1.085015] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[ 1.085044] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[ 1.085057] cpuidle: using governor ladder
[ 1.085058] cpuidle: using governor menu
[ 1.085166] TCP: cubic registered
[ 1.085234] NET: Registered protocol family 10
[ 1.085368] NET: Registered protocol family 17
[ 1.085372] Registering the dns_resolver key type
[ 1.085415] Using IPI No-Shortcut mode
[ 1.085482] PM: Hibernation image not present or could not be loaded.
[ 1.085486] registered taskstats version 1
[ 1.085919] rtc_cmos 00:06: setting system clock to 2012-08-16 05:43:50 UTC (1345095830)
[ 1.085964] Initializing network drop monitor service
[ 1.086010] Freeing unused kernel memory: 524k freed
[ 1.086116] Write protecting the kernel text: 3812k
[ 1.086134] Write protecting the kernel read-only data: 1124k
[ 1.091427] systemd-udevd[49]: starting version 188
[ 1.092112] Setting new ACPI handle for discrete video card
[ 1.097570] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.120297] usbcore: registered new interface driver usbfs
[ 1.120320] usbcore: registered new interface driver hub
[ 1.120939] usbcore: registered new device driver usb
[ 1.121264] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.121303] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[ 1.121307] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[ 1.121324] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 1.121346] ehci_hcd 0000:00:1a.0: debug port 2
[ 1.121985] SCSI subsystem initialized
[ 1.122870] libata version 3.00 loaded.
[ 1.125236] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
[ 1.125257] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xd3619000
[ 1.133400] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 1.133553] hub 1-0:1.0: USB hub found
[ 1.133559] hub 1-0:1.0: 2 ports detected
[ 1.133819] ahci 0000:00:1f.2: version 3.0
[ 1.133882] ahci 0000:00:1f.2: irq 42 for MSI/MSI-X
[ 1.133943] ahci: SSS flag set, parallel bus scan disabled
[ 1.146744] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x5 impl SATA mode
[ 1.146747] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part ems apst
[ 1.146751] ahci 0000:00:1f.2: setting latency timer to 64
[ 1.153993] scsi0 : ahci
[ 1.154077] scsi1 : ahci
[ 1.154147] scsi2 : ahci
[ 1.154215] scsi3 : ahci
[ 1.154277] scsi4 : ahci
[ 1.154340] scsi5 : ahci
[ 1.154412] ata1: SATA max UDMA/133 abar m2048@0xd3617000 port 0xd3617100 irq 42
[ 1.154414] ata2: DUMMY
[ 1.154417] ata3: SATA max UDMA/133 abar m2048@0xd3617000 port 0xd3617200 irq 42
[ 1.154418] ata4: DUMMY
[ 1.154419] ata5: DUMMY
[ 1.154420] ata6: DUMMY
[ 1.154464] xhci_hcd 0000:00:14.0: setting latency timer to 64
[ 1.154469] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.154480] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 1.154590] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 1.154604] xhci_hcd 0000:00:14.0: irq 21, io mem 0xd3600000
[ 1.154654] xhci_hcd 0000:00:14.0: irq 43 for MSI/MSI-X
[ 1.154773] xHCI xhci_add_endpoint called for root hub
[ 1.154775] xHCI xhci_check_bandwidth called for root hub
[ 1.154808] hub 2-0:1.0: USB hub found
[ 1.154816] hub 2-0:1.0: 4 ports detected
[ 1.154879] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.154883] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[ 1.154958] xHCI xhci_add_endpoint called for root hub
[ 1.154960] xHCI xhci_check_bandwidth called for root hub
[ 1.154991] hub 3-0:1.0: USB hub found
[ 1.155001] hub 3-0:1.0: 4 ports detected
[ 1.155111] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.155116] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[ 1.155124] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4
[ 1.155149] ehci_hcd 0000:00:1d.0: debug port 2
[ 1.159035] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
[ 1.159048] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xd3618000
[ 1.166703] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 1.166815] hub 4-0:1.0: USB hub found
[ 1.166818] hub 4-0:1.0: 2 ports detected
[ 1.439689] usb 1-1: new high-speed USB device number 2 using ehci_hcd
[ 1.472980] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.525743] ata1.00: ATA-8: ST9500325AS, 0011LVM1, max UDMA/100
[ 1.525760] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 1.527718] ata1.00: configured for UDMA/100
[ 1.527831] scsi 0:0:0:0: Direct-Access ATA ST9500325AS 0011 PQ: 0 ANSI: 5
[ 1.563385] hub 1-1:1.0: USB hub found
[ 1.563489] hub 1-1:1.0: 6 ports detected
[ 1.619459] Refined TSC clocksource calibration: 2494.333 MHz.
[ 1.619462] Switching to clocksource tsc
[ 1.669365] usb 4-1: new high-speed USB device number 2 using ehci_hcd
[ 1.793111] hub 4-1:1.0: USB hub found
[ 1.793177] hub 4-1:1.0: 6 ports detected
[ 1.845823] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.848881] ata3.00: ATAPI: PLDS DVD-RW DS8A8SH, KL31, max UDMA/100
[ 1.849780] ata3.00: configured for UDMA/100
[ 1.852483] scsi 2:0:0:0: CD-ROM PLDS DVD-RW DS8A8SH KL31 PQ: 0 ANSI: 5
[ 1.857313] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 1.857364] sd 0:0:0:0: [sda] Write Protect is off
[ 1.857367] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.857386] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.859247] usb 1-1.3: new full-speed USB device number 3 using ehci_hcd
[ 1.863186] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.863202] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.863302] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 1.883796] sda: sda1 sda2 sda3
[ 1.884063] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.009051] usb 1-1.4: new high-speed USB device number 4 using ehci_hcd
[ 2.158842] usb 4-1.6: new high-speed USB device number 3 using ehci_hcd
[ 2.432799] REISERFS (device sda1): found reiserfs format "3.6" with standard journal
[ 2.432823] REISERFS (device sda1): using ordered data mode
[ 2.432825] reiserfs: using flush barriers
[ 2.433215] REISERFS (device sda1): journal params: device sda1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[ 2.433387] REISERFS (device sda1): checking transaction log (sda1)
[ 2.515756] REISERFS (device sda1): Using r5 hash to sort names
[ 3.230646] systemd[1]: systemd 188 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP; arch)
[ 3.408334] systemd[1]: Inserted module 'autofs4'
[ 3.408399] systemd[1]: Set hostname to <architect>.
[ 3.973819] systemd[1]: [/usr/lib/systemd/system/rc-local-shutdown.service:3] Unknown lvalue 'ConditionPathIsExecutable' in section 'Unit'. Ignoring.
[ 4.034956] systemd[1]: [/usr/lib/systemd/system/rc-local.service:3] Unknown lvalue 'ConditionPathIsExecutable' in section 'Unit'. Ignoring.
[ 4.518631] systemd-udevd[153]: starting version 188
[ 4.577734] reiserfs: enabling write barrier flush mode
[ 4.652314] systemd-journald[154]: Fixed max_use=147.3M max_size=18.4M min_size=64.0K keep_free=73.6M
[ 4.652347] systemd-journald[154]: Reserving 33543 entries in hash table.
[ 4.652841] systemd-journald[154]: Vacuuming...
[ 5.169943] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/PNP0C0C:00/input/input1
[ 5.169950] ACPI: Power Button [PWRB]
[ 5.170018] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/PNP0C0E:00/input/input2
[ 5.170022] ACPI: Sleep Button [SLPB]
[ 5.170072] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input3
[ 5.170100] ACPI: Lid Switch [LID0]
[ 5.170134] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 5.170137] ACPI: Power Button [PWRF]
[ 5.189868] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[ 5.221888] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 5.273251] iTCO_vendor_support: vendor-support=0
[ 5.273680] ACPI: AC Adapter [ACAD] (off-line)
[ 5.408767] Linux agpgart interface v0.103
[ 5.510286] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
[ 5.510375] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0460)
[ 5.510484] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 5.526899] psmouse serio1: hgpk: ID: 10 00 64
[ 5.701959] mei: module is from the staging directory, the quality is unknown, you have been warned.
[ 5.790910] thermal LNXTHERM:00: registered as thermal_zone0
[ 5.790913] ACPI: Thermal Zone [TZ00] (42 C)
[ 5.790952] ACPI: Requesting acpi_cpufreq
[ 5.876744] [drm] Initialized drm 1.1.0 20060810
[ 5.913735] Monitor-Mwait will be used to enter C-1 state
[ 5.913759] Monitor-Mwait will be used to enter C-2 state
[ 5.913781] Monitor-Mwait will be used to enter C-3 state
[ 5.913795] ACPI: acpi_idle registered with cpuidle
[ 5.957095] cfg80211: Calling CRDA to update world regulatory domain
[ 5.970540] ACPI: Battery Slot [BAT1] (battery present)
[ 6.011581] hda_codec: CX20590: BIOS auto-probing.
[ 6.012383] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input6
[ 6.085516] psmouse serio1: elantech: assuming hardware version 3 (with firmware version 0x450f02)
[ 6.108981] psmouse serio1: elantech: Synaptics capabilities query result 0x78, 0x17, 0x0b.
[ 6.135296] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 6.135369] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 6.135418] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 6.135642] mei 0000:00:16.0: setting latency timer to 64
[ 6.135699] mei 0000:00:16.0: irq 45 for MSI/MSI-X
[ 6.138210] ACPI Warning: 0x00004040-0x0000405f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20120320/utaddress-251)
[ 6.138216] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 6.138366] agpgart-intel 0000:00:00.0: Intel Ivybridge Chipset
[ 6.138415] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[ 6.139135] agpgart-intel 0000:00:00.0: detected 65536K stolen memory
[ 6.140739] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
[ 6.157387] input: Ideapad extra buttons as /devices/platform/ideapad/input/input10
[ 6.181781] i915 0000:00:02.0: setting latency timer to 64
[ 6.195724] i915 0000:00:02.0: irq 46 for MSI/MSI-X
[ 6.195732] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 6.195733] [drm] Driver supports precise vblank timestamp query.
[ 6.196268] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 6.229397] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input11
[ 6.407852] nvidia: module license 'NVIDIA' taints kernel.
[ 6.407855] Disabling lock debugging due to kernel taint
[ 6.414984] nvidia 0000:01:00.0: power state changed by ACPI to D0
[ 6.414988] nvidia 0000:01:00.0: power state changed by ACPI to D0
[ 6.415066] NVRM: loading NVIDIA UNIX x86 Kernel Module 304.37 Wed Aug 8 19:50:16 PDT 2012
[ 6.473350] microcode: CPU0 sig=0x306a9, pf=0x10, revision=0x12
[ 6.558887] microcode: CPU1 sig=0x306a9, pf=0x10, revision=0x12
[ 6.559193] microcode: CPU2 sig=0x306a9, pf=0x10, revision=0x12
[ 6.559538] microcode: CPU3 sig=0x306a9, pf=0x10, revision=0x12
[ 6.559899] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 6.570364] ath: EEPROM regdomain: 0x65
[ 6.570366] ath: EEPROM indicates we should expect a direct regpair map
[ 6.570368] ath: Country alpha2 being used: 00
[ 6.570369] ath: Regpair used: 0x65
[ 6.625369] ieee80211 phy0: Selected rate control algorithm 'ath9k_rate_control'
[ 6.625531] Registered led device: ath9k-phy0
[ 6.625536] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xf88c0000, irq=17
[ 6.648775] Linux media interface: v0.10
[ 6.648993] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off
[ 6.652561] Bluetooth: Core ver 2.16
[ 6.652578] NET: Registered protocol family 31
[ 6.652580] Bluetooth: HCI device and connection manager initialized
[ 6.652582] Bluetooth: HCI socket layer initialized
[ 6.652584] Bluetooth: L2CAP socket layer initialized
[ 6.652588] Bluetooth: SCO socket layer initialized
[ 6.684781] Linux video capture interface: v2.00
[ 6.761692] usbcore: registered new interface driver btusb
[ 6.815537] rts5139: module is from the staging directory, the quality is unknown, you have been warned.
[ 6.819406] scsi6 : SCSI emulation for RTS5139 USB card reader
[ 6.819536] scsi 6:0:0:0: Direct-Access Generic- xD/SD/M.S. 1.00 PQ: 0 ANSI: 0 CCS
[ 6.820922] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[ 6.821739] usbcore: registered new interface driver rts5139
[ 6.822866] checking generic (e0000000 410000) vs hw (e0000000 10000000)
[ 6.822869] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
[ 6.822882] Console: switching to colour dummy device 80x25
[ 6.823406] fbcon: inteldrmfb (fb0) is primary device
[ 6.830840] uvcvideo: Found UVC 1.00 device Lenovo EasyCamera (04f2:b2e2)
[ 6.832754] input: Lenovo EasyCamera as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.6/4-1.6:1.0/input/input12
[ 6.832868] usbcore: registered new interface driver uvcvideo
[ 6.832869] USB Video Class driver (1.1.1)
[ 6.995891] Console: switching to colour frame buffer device 170x48
[ 6.999933] fb0: inteldrmfb frame buffer device
[ 6.999934] drm: registered panic notifier
[ 7.000054] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
[ 7.002109] acpi device:38: registered as cooling_device4
[ 7.002228] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:36/LNXVIDEO:00/input/input13
[ 7.002291] ACPI: Video Device [PEGP] (multi-head: yes rom: yes post: no)
[ 7.004500] acpi device:44: registered as cooling_device5
[ 7.004732] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input14
[ 7.004801] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 7.004824] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 7.169641] usbcore: registered new interface driver ath3k
[ 7.262735] usb 1-1.3: USB disconnect, device number 3
[ 7.602169] Adding 979960k swap on /dev/sda2. Priority:-1 extents:1 across:979960k
[ 7.958251] usb 1-1.3: new full-speed USB device number 5 using ehci_hcd
[ 8.276820] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: data=ordered
[ 8.391735] systemd-journald[154]: Received SIGUSR1
[ 10.873451] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 11.128335] Bluetooth: RFCOMM TTY layer initialized
[ 11.128345] Bluetooth: RFCOMM socket layer initialized
[ 11.128349] Bluetooth: RFCOMM ver 1.11
[ 11.413635] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 13.428469] wlan0: authenticate with 00:23:69:e0:c9:57
[ 13.440604] wlan0: send auth to 00:23:69:e0:c9:57 (try 1/3)
[ 13.442540] wlan0: authenticated
[ 13.449080] wlan0: associating with AP with corrupt beacon
[ 13.450818] wlan0: associate with 00:23:69:e0:c9:57 (try 1/3)
[ 13.454879] wlan0: RX AssocResp from 00:23:69:e0:c9:57 (capab=0x411 status=0 aid=2)
[ 13.461369] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 13.461411] wlan0: associated
[ 13.535109] bbswitch: version 0.4.2
[ 13.535116] bbswitch: Found integrated VGA device 0000:00:02.0: \_SB_.PCI0.GFX0
[ 13.535122] bbswitch: Found discrete VGA device 0000:01:00.0: \_SB_.PCI0.PEG0.PEGP
[ 13.535179] bbswitch: detected an Optimus _DSM function
[ 13.535187] bbswitch: Succesfully loaded. Discrete card 0000:01:00.0 is on
[ 13.621600] bbswitch: disabling discrete graphics
[ 13.621858] bbswitch: Result of Optimus _DSM call: 11000059
[ 13.633963] pci 0000:01:00.0: Refused to change power state, currently in D0
[ 13.639096] pci 0000:01:00.0: power state changed by ACPI to D3
[ 14.866748] wlan0: IPv6 duplicate address fe80::466d:57ff:fed9:3858 detected!
[ 19.468382] EXT4-fs (sda3): re-mounted. Opts: data=ordered,commit=600
[ 25.756579] CPU1: Package power limit notification (total events = 1)
[ 25.756586] CPU0: Package power limit notification (total events = 1)
[ 25.756605] CPU2: Package power limit notification (total events = 1)
[ 25.756611] CPU3: Package power limit notification (total events = 1)
[ 25.756655] CPU1: Package power limit normal
[ 25.756658] CPU0: Package power limit normal
[ 25.756676] CPU2: Package power limit normal
[ 25.756682] CPU3: Package power limit normal
[ 28.870816] fuse init (API version 7.18)
[ 405.761491] CPU0: Package power limit notification (total events = 738)
[ 405.761496] CPU2: Package power limit notification (total events = 738)
[ 405.761499] CPU3: Package power limit notification (total events = 738)
[ 405.761503] CPU1: Package power limit notification (total events = 737)
[ 405.761864] CPU0: Package power limit normal
[ 405.761884] CPU2: Package power limit normal
[ 405.761886] CPU3: Package power limit normal
[ 405.761915] CPU1: Package power limit normal
[ 453.450036] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 453.450203] sr 2:0:0:0: Attached scsi generic sg1 type 5
[ 453.450934] sd 6:0:0:0: Attached scsi generic sg2 type 0
[ 561.690115] psmouse serio1: Touchpad at isa0060/serio1/input0 lost sync at byte 6
[ 561.705571] psmouse serio1: Touchpad at isa0060/serio1/input0 - driver resynced.
[ 713.191865] CPU2: Package power limit notification (total events = 1465)
[ 713.191872] CPU0: Package power limit notification (total events = 1465)
[ 713.191876] CPU1: Package power limit notification (total events = 1464)
[ 713.191881] CPU3: Package power limit notification (total events = 1465)
[ 713.202700] CPU0: Package power limit normal
[ 713.202704] CPU1: Package power limit normal
[ 713.202708] CPU3: Package power limit normal
[ 713.202711] CPU2: Package power limit normaldmesg | grep -i memory
[ 0.000000] initial memory mapped : 0 - 01c00000
[ 0.000000] Base memory trampoline at [c0099000] 99000 size 16384
[ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[ 0.000000] Early memory PFN ranges
[ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000020200000
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Memory: 3015272k/3063808k available (3810k kernel code, 40648k reserved, 1472k data, 524k init, 2149124k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000188] Initializing cgroup subsys memory
[ 0.619052] Freeing initrd memory: 2664k freed
[ 1.086010] Freeing unused kernel memory: 524k freed
[ 6.139135] agpgart-intel 0000:00:00.0: detected 65536K stolen memoryi added mem=4G to kernel parameters line in grub bot got nothing.
anyone have any suggestions?
Last edited by shohart (2012-08-16 09:01:26)
Offline
#2 2012-08-16 06:35:28
- runny6play
- Member
- Registered: 2012-02-18
- Posts: 85
Re: [SOLVED] Archlinux not detecting full ammount of RAM (again)
uname -a
Linux architect 3.4.8-1-ARCH #1 SMP PREEMPT Thu Aug 9 19:24:46 UTC 2012 i686 GNU/Linux
i686 ....thats the 32-bit version of Arch it doesn't matter what you do
x86_64 is the 64-bit version. 32-bit only supports up to 3 GB
you'll need to re install making sure you use the x86_64 version. or live with 3 GB
Last edited by runny6play (2012-08-16 06:36:33)
Offline
#3 2012-08-16 07:51:42
- shohart
- Member
- Registered: 2011-05-19
- Posts: 39
Re: [SOLVED] Archlinux not detecting full ammount of RAM (again)
F*#k! i am was sure i`ve chosen x86_64 version in latest dualboot installer... and i686 shows real architecture and not rreal mode of CPU... Ok..
anyway. can i install x86_64 on this CPU?
lscpu
Architecture: i686
CPU op-mode(s): 32-bit, 64-bit
Byte Order: Little Endian
CPU(s): 4
On-line CPU(s) list: 0-3
Thread(s) per core: 2
Core(s) per socket: 2
Socket(s): 1
Vendor ID: GenuineIntel
CPU family: 6
Model: 58
Stepping: 9
CPU MHz: 1200.000
BogoMIPS: 4990.37
Virtualization: VT-x
L1d cache: 32K
L1i cache: 32K
L2 cache: 256K
L3 cache: 3072Kthanks and forgive me my dumbness.
Offline
#4 2012-08-16 07:53:18
- buzzqw
- Member
- Registered: 2010-08-18
- Posts: 59
Re: [SOLVED] Archlinux not detecting full ammount of RAM (again)
a faster solution is to use a 32bit PAE kernel..
BHH
HDConvertToX, AutoMen, AutoMKV author
Offline
#5 2012-08-16 07:57:23
- Awebb
- Member
- Registered: 2010-05-06
- Posts: 6,688
Re: [SOLVED] Archlinux not detecting full ammount of RAM (again)
I know Obama said this before, but: Yes, you can!
Nice device by the way!
Offline
#6 2012-08-16 09:00:54
- shohart
- Member
- Registered: 2011-05-19
- Posts: 39
Re: [SOLVED] Archlinux not detecting full ammount of RAM (again)
buzzqw wrote:
a faster solution is to use a 32bit PAE kernel..
that was the rightest direction. i do not want to start a holywar about 'what is better x86 or x64... the reason is that i've just installed and configurated my system and everything works amasingly well... even bumblebee! so i just use pae kernel for now.... thanks for the answer!
Awebb wrote:
Nice device by the way!
Yeah, thnx! i've been using HP laptop with AMD turion x64 1,8 Ghz and ATI x200M for like 7 years.... i loved that old man... but when even flash video began to look like a comix.... i ve passed it away, went to the shop and grabbed this Lenovo machine... i wanted i7 but 1,5 kilobucks is too much to pay for a typing machine (it is the main usage of my laptop) for me... thanx everyone for a support. marking as solved.
Offline
#7 2012-08-16 21:00:39
- shohart
- Member
- Registered: 2011-05-19
- Posts: 39
Re: [SOLVED] Archlinux not detecting full ammount of RAM (again)
it is quite strange i compiled a -ck kernel with PAE enabled and highram 64Gb but after rebooting i still get 3Gb of ram on the new kernel...
Offline