You are not logged in.
Hi everyone,
I bought a new graphics card: the ATI HD 7750 (7700 Series, Cape Verde) and installed catalyst-total from the [catalyst] repo, because the 3D performance with xf86-video-ati-git was incredible poor. I wasn't even able to scroll in chromium with this.
Now with proprietary fglrx everything performs buttery smooth, except I get severe troubles running 3D games.
The only one I'd miss very much is Minecraft, but also there I always encounter a system freeze after 5 seconds. Only S-Abf + B can help me get out of there, I cannot switch to tty1-6 to fix this issue.
Here's my Xorg.0.log
[ 15.054]
X.Org X Server 1.12.4
Release Date: 2012-08-27
[ 15.054] X Protocol Version 11, Revision 0
[ 15.054] Build Operating System: Linux 3.4.8-1-ARCH x86_64
[ 15.054] Current Operating System: Linux hubert 3.5.3-1-ARCH #1 SMP PREEMPT Sun Aug 26 09:14:51 CEST 2012 x86_64
[ 15.054] Kernel command line: locale=de_DE.UTF-8 lang=de cryptdevice=/dev/sda2:vgroup root=/dev/mapper/vgroup-root nomodeset ro initrd=../initramfs-linux.img BOOT_IMAGE=../vmlinuz-linux
[ 15.054] Build Date: 27 August 2012 08:04:39AM
[ 15.054]
[ 15.054] Current version of pixman: 0.26.2
[ 15.054] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 15.054] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 15.054] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Sep 1 11:22:33 2012
[ 15.056] (==) Using config file: "/etc/X11/xorg.conf"
[ 15.056] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 15.058] (==) ServerLayout "aticonfig Layout"
[ 15.058] (**) |-->Screen "aticonfig-Screen[0]-0" (0)
[ 15.058] (**) | |-->Monitor "aticonfig-Monitor[0]-0"
[ 15.060] (**) | |-->Device "aticonfig-Device[0]-0"
[ 15.060] (==) Automatically adding devices
[ 15.060] (==) Automatically enabling devices
[ 15.062] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 15.063] Entry deleted from font path.
[ 15.065] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 15.065] Entry deleted from font path.
[ 15.065] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 15.065] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 15.065] Entry deleted from font path.
[ 15.065] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 15.065] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/
[ 15.065] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 15.065] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 15.065] (II) Loader magic: 0x7c8b00
[ 15.065] (II) Module ABI versions:
[ 15.065] X.Org ANSI C Emulation: 0.4
[ 15.065] X.Org Video Driver: 12.1
[ 15.065] X.Org XInput driver : 16.0
[ 15.065] X.Org Server Extension : 6.0
[ 15.067] (--) PCI:*(0:1:0:0) 1002:683f:174b:e213 rev 0, Mem @ 0xd0000000/268435456, 0xfeac0000/262144, I/O @ 0x0000d000/256, BIOS @ 0x????????/131072
[ 15.067] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 15.067] (II) "extmod" will be loaded by default.
[ 15.067] (II) "dbe" will be loaded by default.
[ 15.067] (II) "glx" will be loaded by default.
[ 15.067] (II) "record" will be loaded by default.
[ 15.067] (II) "dri" will be loaded by default.
[ 15.067] (II) "dri2" will be loaded by default.
[ 15.067] (II) LoadModule: "extmod"
[ 15.073] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 15.076] (II) Module extmod: vendor="X.Org Foundation"
[ 15.076] compiled for 1.12.4, module version = 1.0.0
[ 15.076] Module class: X.Org Server Extension
[ 15.076] ABI class: X.Org Server Extension, version 6.0
[ 15.076] (II) Loading extension MIT-SCREEN-SAVER
[ 15.076] (II) Loading extension XFree86-VidModeExtension
[ 15.076] (II) Loading extension XFree86-DGA
[ 15.076] (II) Loading extension DPMS
[ 15.076] (II) Loading extension XVideo
[ 15.076] (II) Loading extension XVideo-MotionCompensation
[ 15.076] (II) Loading extension X-Resource
[ 15.076] (II) LoadModule: "dbe"
[ 15.076] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 15.078] (II) Module dbe: vendor="X.Org Foundation"
[ 15.078] compiled for 1.12.4, module version = 1.0.0
[ 15.078] Module class: X.Org Server Extension
[ 15.078] ABI class: X.Org Server Extension, version 6.0
[ 15.078] (II) Loading extension DOUBLE-BUFFER
[ 15.078] (II) LoadModule: "glx"
[ 15.078] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 15.088] (II) Module glx: vendor="Advanced Micro Devices, Inc."
[ 15.088] compiled for 6.9.0, module version = 1.0.0
[ 15.088] (II) Loading extension GLX
[ 15.088] (II) LoadModule: "record"
[ 15.088] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 15.090] (II) Module record: vendor="X.Org Foundation"
[ 15.090] compiled for 1.12.4, module version = 1.13.0
[ 15.090] Module class: X.Org Server Extension
[ 15.090] ABI class: X.Org Server Extension, version 6.0
[ 15.090] (II) Loading extension RECORD
[ 15.090] (II) LoadModule: "dri"
[ 15.090] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 15.095] (II) Module dri: vendor="X.Org Foundation"
[ 15.095] compiled for 1.12.4, module version = 1.0.0
[ 15.095] ABI class: X.Org Server Extension, version 6.0
[ 15.095] (II) Loading extension XFree86-DRI
[ 15.095] (II) LoadModule: "dri2"
[ 15.095] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 15.097] (II) Module dri2: vendor="X.Org Foundation"
[ 15.097] compiled for 1.12.4, module version = 1.2.0
[ 15.097] ABI class: X.Org Server Extension, version 6.0
[ 15.097] (II) Loading extension DRI2
[ 15.097] (II) LoadModule: "fglrx"
[ 15.101] (II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
[ 15.229] (II) Module fglrx: vendor="FireGL - AMD Technologies Inc."
[ 15.229] compiled for 1.4.99.906, module version = 8.98.2
[ 15.229] Module class: X.Org Video Driver
[ 15.230] (II) Loading sub module "fglrxdrm"
[ 15.230] (II) LoadModule: "fglrxdrm"
[ 15.230] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[ 15.234] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
[ 15.234] compiled for 1.4.99.906, module version = 8.98.2
[ 15.234] (II) AMD Proprietary Linux Driver Version Identifier:8.98.2
[ 15.234] (II) AMD Proprietary Linux Driver Release Identifier: 8.982
[ 15.234] (II) AMD Proprietary Linux Driver Build Date: Jul 27 2012 20:37:56
[ 15.234] (++) using VT number 7
[ 15.236] (WW) Falling back to old probe method for fglrx
[ 15.269] (II) Loading PCS database from /etc/ati/amdpcsdb
[ 15.276] (--) Chipset Supported AMD Graphics Processor (0x683F) found
[ 15.280] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:17:0) found
[ 15.280] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:18:0) found
[ 15.280] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:18:1) found
[ 15.280] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:18:2) found
[ 15.280] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:19:0) found
[ 15.280] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:19:1) found
[ 15.280] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:19:2) found
[ 15.280] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:0) found
[ 15.280] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:1) found
[ 15.280] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:2) found
[ 15.280] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:3) found
[ 15.280] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:4) found
[ 15.280] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:5) found
[ 15.280] (WW) fglrx: No matching Device section for instance (BusID PCI:0@1:0:1) found
[ 15.282] (II) AMD Video driver is running on a device belonging to a group targeted for this release
[ 15.283] (II) AMD Video driver is signed
[ 15.283] (II) fglrx(0): pEnt->device->identifier=0xb0c260
[ 15.283] (II) fglrx(0): === [xdl_xs112_atiddxPreInit] === begin
[ 15.284] (II) Loading sub module "vgahw"
[ 15.284] (II) LoadModule: "vgahw"
[ 15.284] (II) Loading /usr/lib/xorg/modules/libvgahw.so
[ 15.286] (II) Module vgahw: vendor="X.Org Foundation"
[ 15.286] compiled for 1.12.4, module version = 0.1.0
[ 15.286] ABI class: X.Org Video Driver, version 12.1
[ 15.286] (**) fglrx(0): Depth 24, (--) framebuffer bpp 32
[ 15.286] (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 15.286] (==) fglrx(0): Default visual is TrueColor
[ 15.286] (**) fglrx(0): Option "DPMS" "true"
[ 15.286] (==) fglrx(0): RGB weight 888
[ 15.286] (II) fglrx(0): Using 8 bits per RGB
[ 15.287] (==) fglrx(0): Buffer Tiling is ON
[ 15.289] (II) Loading sub module "fglrxdrm"
[ 15.289] (II) LoadModule: "fglrxdrm"
[ 15.290] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[ 15.290] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
[ 15.290] compiled for 1.4.99.906, module version = 8.98.2
[ 15.293] ukiDynamicMajor: found major device number 250
[ 15.293] ukiDynamicMajor: found major device number 250
[ 15.293] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 15.293] ukiOpenDevice: node name is /dev/ati/card0
[ 15.293] ukiOpenDevice: open result is 11, (OK)
[ 15.293] ukiOpenByBusid: ukiOpenMinor returns 11
[ 15.293] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 15.294] (**) fglrx(0): NoAccel = NO
[ 15.294] (**) fglrx(0): AMD 2D Acceleration Architecture enabled
[ 15.294] (--) fglrx(0): Chipset: "AMD Radeon HD 7700 Series " (Chipset = 0x683f)
[ 15.294] (--) fglrx(0): (PciSubVendor = 0x174b, PciSubDevice = 0xe213)
[ 15.294] (==) fglrx(0): board vendor info: third party graphics adapter - NOT original AMD
[ 15.294] (--) fglrx(0): Linear framebuffer (phys) at 0xd0000000
[ 15.294] (--) fglrx(0): MMIO registers at 0xfeac0000
[ 15.294] (--) fglrx(0): I/O port at 0x0000d000
[ 15.294] (==) fglrx(0): ROM-BIOS at 0x000c0000
[ 15.323] (II) fglrx(0): AC Adapter is used
[ 15.346] (II) fglrx(0): Primary V_BIOS segment is: 0xc000
[ 15.462] (II) Loading sub module "vbe"
[ 15.462] (II) LoadModule: "vbe"
[ 15.462] (II) Loading /usr/lib/xorg/modules/libvbe.so
[ 15.464] (II) Module vbe: vendor="X.Org Foundation"
[ 15.464] compiled for 1.12.4, module version = 1.1.0
[ 15.464] ABI class: X.Org Video Driver, version 12.1
[ 15.467] (II) fglrx(0): VESA BIOS detected
[ 15.467] (II) fglrx(0): VESA VBE Version 3.0
[ 15.467] (II) fglrx(0): VESA VBE Total Mem: 16384 kB
[ 15.467] (II) fglrx(0): VESA VBE OEM: AMD ATOMBIOS
[ 15.467] (II) fglrx(0): VESA VBE OEM Software Rev: 15.14
[ 15.467] (II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2010, Advanced Micro Devices, Inc.
[ 15.467] (II) fglrx(0): VESA VBE OEM Product: VERDE
[ 15.467] (II) fglrx(0): VESA VBE OEM Product Rev: 01.00
[ 15.475] (II) fglrx(0): AMD Video BIOS revision 9 or later detected
[ 15.475] (--) fglrx(0): Video RAM: 1048576 kByte, Type: GDDR5
[ 15.475] (II) fglrx(0): PCIE card detected
[ 15.475] (--) fglrx(0): Using per-process page tables (PPPT) as GART.
[ 15.475] (WW) fglrx(0): board is an unknown third party board, chipset is supported
[ 15.479] (II) fglrx(0): Using adapter: 1:0.0.
[ 15.489] (II) fglrx(0): [FB] MC range(MCFBBase = 0xf400000000, MCFBSize = 0x40000000)
[ 15.496] (II) fglrx(0): Interrupt handler installed at IRQ 44.
[ 15.496] (II) fglrx(0): RandR 1.2 support is enabled!
[ 15.496] (II) fglrx(0): RandR 1.2 rotation support is enabled!
[ 15.496] (==) fglrx(0): Center Mode is disabled
[ 15.496] (II) Loading sub module "fb"
[ 15.496] (II) LoadModule: "fb"
[ 15.496] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 15.501] (II) Module fb: vendor="X.Org Foundation"
[ 15.501] compiled for 1.12.4, module version = 1.0.0
[ 15.501] ABI class: X.Org ANSI C Emulation, version 0.4
[ 15.501] (II) Loading sub module "ddc"
[ 15.501] (II) LoadModule: "ddc"
[ 15.501] (II) Module "ddc" already built-in
[ 15.652] (II) fglrx(0): Finished Initialize PPLIB!
[ 15.658] (II) fglrx(0): Output DFP1 using monitor section aticonfig-Monitor[0]-0
[ 15.658] (II) fglrx(0): Output DFP2 has no monitor section
[ 15.658] (II) fglrx(0): Output DFP3 has no monitor section
[ 15.658] (II) fglrx(0): Output DFP4 has no monitor section
[ 15.658] (II) fglrx(0): Output DFP5 has no monitor section
[ 15.658] (II) fglrx(0): Output DFP6 has no monitor section
[ 15.658] (II) fglrx(0): Output CRT1 has no monitor section
[ 15.658] (II) Loading sub module "ddc"
[ 15.658] (II) LoadModule: "ddc"
[ 15.658] (II) Module "ddc" already built-in
[ 15.658] (II) fglrx(0): Connected Display0: DFP6
[ 15.658] (II) fglrx(0): Display0 EDID data ---------------------------
[ 15.658] (II) fglrx(0): Manufacturer: ENC Model: 1975 Serial#: 16843009
[ 15.658] (II) fglrx(0): Year: 2010 Week: 16
[ 15.658] (II) fglrx(0): EDID Version: 1.3
[ 15.658] (II) fglrx(0): Digital Display Input
[ 15.658] (II) fglrx(0): Max Image Size [cm]: horiz.: 48 vert.: 30
[ 15.658] (II) fglrx(0): Gamma: 2.20
[ 15.658] (II) fglrx(0): DPMS capabilities: StandBy Suspend Off
[ 15.658] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 15.659] (II) fglrx(0): First detailed timing is preferred mode
[ 15.659] (II) fglrx(0): redX: 0.640 redY: 0.330 greenX: 0.300 greenY: 0.600
[ 15.659] (II) fglrx(0): blueX: 0.150 blueY: 0.060 whiteX: 0.313 whiteY: 0.329
[ 15.659] (II) fglrx(0): Supported established timings:
[ 15.659] (II) fglrx(0): 720x400@70Hz
[ 15.659] (II) fglrx(0): 640x480@60Hz
[ 15.659] (II) fglrx(0): 800x600@60Hz
[ 15.659] (II) fglrx(0): 1024x768@60Hz
[ 15.659] (II) fglrx(0): Manufacturer's mask: 0
[ 15.659] (II) fglrx(0): Supported standard timings:
[ 15.659] (II) fglrx(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 15.659] (II) fglrx(0): #1: hsize: 1280 vsize 960 refresh: 60 vid: 16513
[ 15.659] (II) fglrx(0): Supported detailed timing:
[ 15.659] (II) fglrx(0): clock: 119.0 MHz Image Size: 474 x 297 mm
[ 15.659] (II) fglrx(0): h_active: 1680 h_sync: 1728 h_sync_end 1760 h_blank_end 1840 h_border: 0
[ 15.659] (II) fglrx(0): v_active: 1050 v_sync: 1053 v_sync_end 1059 v_blanking: 1080 v_border: 0
[ 15.659] (II) fglrx(0): Serial No: 98458040
[ 15.659] (II) fglrx(0): Ranges: V min: 59 V max: 61 Hz, H min: 31 H max: 65 kHz, PixClock max 125 MHz
[ 15.659] (II) fglrx(0): Monitor name: S2202W
[ 15.659] (II) fglrx(0): EDID (in hex):
[ 15.659] (II) fglrx(0): 00ffffffffffff0015c3751901010101
[ 15.659] (II) fglrx(0): 1014010380301e78eaee95a3544c9926
[ 15.659] (II) fglrx(0): 0f5054a1080081808140010101010101
[ 15.659] (II) fglrx(0): 0101010101017c2e90a0601a1e403020
[ 15.659] (II) fglrx(0): 3600da291100001a000000ff00393834
[ 15.659] (II) fglrx(0): 35383034300a20202020000000fd003b
[ 15.659] (II) fglrx(0): 3d1f410c000a202020202020000000fc
[ 15.659] (II) fglrx(0): 005332323032570a202020202020001f
[ 15.659] (II) fglrx(0): End of Display0 EDID data --------------------
[ 15.660] (II) fglrx(0): EDID for output DFP1
[ 15.660] (II) fglrx(0): EDID for output DFP2
[ 15.660] (II) fglrx(0): EDID for output DFP3
[ 15.660] (II) fglrx(0): EDID for output DFP4
[ 15.660] (II) fglrx(0): EDID for output DFP5
[ 15.660] (II) fglrx(0): EDID for output DFP6
[ 15.660] (II) fglrx(0): Manufacturer: ENC Model: 1975 Serial#: 16843009
[ 15.660] (II) fglrx(0): Year: 2010 Week: 16
[ 15.660] (II) fglrx(0): EDID Version: 1.3
[ 15.660] (II) fglrx(0): Digital Display Input
[ 15.660] (II) fglrx(0): Max Image Size [cm]: horiz.: 48 vert.: 30
[ 15.660] (II) fglrx(0): Gamma: 2.20
[ 15.660] (II) fglrx(0): DPMS capabilities: StandBy Suspend Off
[ 15.660] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 15.660] (II) fglrx(0): First detailed timing is preferred mode
[ 15.660] (II) fglrx(0): redX: 0.640 redY: 0.330 greenX: 0.300 greenY: 0.600
[ 15.660] (II) fglrx(0): blueX: 0.150 blueY: 0.060 whiteX: 0.313 whiteY: 0.329
[ 15.660] (II) fglrx(0): Supported established timings:
[ 15.660] (II) fglrx(0): 720x400@70Hz
[ 15.660] (II) fglrx(0): 640x480@60Hz
[ 15.660] (II) fglrx(0): 800x600@60Hz
[ 15.660] (II) fglrx(0): 1024x768@60Hz
[ 15.660] (II) fglrx(0): Manufacturer's mask: 0
[ 15.660] (II) fglrx(0): Supported standard timings:
[ 15.660] (II) fglrx(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 15.660] (II) fglrx(0): #1: hsize: 1280 vsize 960 refresh: 60 vid: 16513
[ 15.660] (II) fglrx(0): Supported detailed timing:
[ 15.660] (II) fglrx(0): clock: 119.0 MHz Image Size: 474 x 297 mm
[ 15.660] (II) fglrx(0): h_active: 1680 h_sync: 1728 h_sync_end 1760 h_blank_end 1840 h_border: 0
[ 15.660] (II) fglrx(0): v_active: 1050 v_sync: 1053 v_sync_end 1059 v_blanking: 1080 v_border: 0
[ 15.660] (II) fglrx(0): Serial No: 98458040
[ 15.660] (II) fglrx(0): Ranges: V min: 59 V max: 61 Hz, H min: 31 H max: 65 kHz, PixClock max 125 MHz
[ 15.660] (II) fglrx(0): Monitor name: S2202W
[ 15.660] (II) fglrx(0): EDID (in hex):
[ 15.660] (II) fglrx(0): 00ffffffffffff0015c3751901010101
[ 15.660] (II) fglrx(0): 1014010380301e78eaee95a3544c9926
[ 15.660] (II) fglrx(0): 0f5054a1080081808140010101010101
[ 15.660] (II) fglrx(0): 0101010101017c2e90a0601a1e403020
[ 15.660] (II) fglrx(0): 3600da291100001a000000ff00393834
[ 15.660] (II) fglrx(0): 35383034300a20202020000000fd003b
[ 15.660] (II) fglrx(0): 3d1f410c000a202020202020000000fc
[ 15.660] (II) fglrx(0): 005332323032570a202020202020001f
[ 15.660] (II) fglrx(0): Printing probed modes for output DFP6
[ 15.660] (II) fglrx(0): Modeline "1680x1050"x60.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
[ 15.660] (II) fglrx(0): Modeline "1400x1050"x60.0 119.00 1400 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
[ 15.660] (II) fglrx(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 15.660] (II) fglrx(0): Modeline "1440x900"x60.0 119.00 1440 1728 1760 1840 900 1053 1059 1080 +hsync -vsync (64.7 kHz)
[ 15.660] (II) fglrx(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
[ 15.660] (II) fglrx(0): Modeline "1280x800"x60.0 108.00 1280 1376 1488 1800 800 961 964 1000 +hsync +vsync (60.0 kHz)
[ 15.660] (II) fglrx(0): Modeline "1280x768"x60.0 108.00 1280 1376 1488 1800 768 961 964 1000 +hsync +vsync (60.0 kHz)
[ 15.660] (II) fglrx(0): Modeline "1280x720"x60.0 108.00 1280 1376 1488 1800 720 961 964 1000 +hsync +vsync (60.0 kHz)
[ 15.660] (II) fglrx(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 15.660] (II) fglrx(0): Modeline "800x600"x60.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 15.660] (II) fglrx(0): Modeline "640x480"x60.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 15.660] (II) fglrx(0): EDID for output CRT1
[ 15.660] (II) fglrx(0): Output DFP1 disconnected
[ 15.660] (II) fglrx(0): Output DFP2 disconnected
[ 15.660] (II) fglrx(0): Output DFP3 disconnected
[ 15.660] (II) fglrx(0): Output DFP4 disconnected
[ 15.660] (II) fglrx(0): Output DFP5 disconnected
[ 15.660] (II) fglrx(0): Output DFP6 connected
[ 15.660] (II) fglrx(0): Output CRT1 disconnected
[ 15.660] (II) fglrx(0): Using exact sizes for initial modes
[ 15.660] (II) fglrx(0): Output DFP6 using initial mode 1680x1050
[ 15.661] (II) fglrx(0): DPI set to (96, 96)
[ 15.661] (II) fglrx(0): Eyefinity capable adapter detected.
[ 15.661] (II) fglrx(0): Adapter AMD Radeon HD 7700 Series has 6 configurable heads and 1 displays connected.
[ 15.661] (==) fglrx(0): PseudoColor visuals disabled
[ 15.661] (II) Loading sub module "ramdac"
[ 15.661] (II) LoadModule: "ramdac"
[ 15.661] (II) Module "ramdac" already built-in
[ 15.661] (==) fglrx(0): NoDRI = NO
[ 15.661] (==) fglrx(0): Capabilities: 0x00000000
[ 15.661] (==) fglrx(0): CapabilitiesEx: 0x00000000
[ 15.661] (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
[ 15.661] (==) fglrx(0): UseFastTLS=0
[ 15.661] (--) Depth 24 pixmap format is 32 bpp
[ 15.661] (II) Loading extension ATIFGLRXDRI
[ 15.661] (II) fglrx(0): doing swlDriScreenInit
[ 15.661] (II) fglrx(0): swlDriScreenInit for fglrx driver
[ 15.661] ukiDynamicMajor: found major device number 250
[ 15.661] ukiDynamicMajor: found major device number 250
[ 15.661] ukiDynamicMajor: found major device number 250
[ 15.661] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 15.661] ukiOpenDevice: node name is /dev/ati/card0
[ 15.661] ukiOpenDevice: open result is 12, (OK)
[ 15.661] ukiOpenByBusid: ukiOpenMinor returns 12
[ 15.661] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 15.661] (II) fglrx(0): [uki] DRM interface version 1.0
[ 15.661] (II) fglrx(0): [uki] created "fglrx" driver at busid "PCI:1:0:0"
[ 15.661] (II) fglrx(0): [uki] added 8192 byte SAREA at 0x2000
[ 15.661] (II) fglrx(0): [uki] mapped SAREA 0x2000 to 0x7f509aba4000
[ 15.661] (II) fglrx(0): [uki] framebuffer handle = 0x3000
[ 15.661] (II) fglrx(0): [uki] added 1 reserved context for kernel
[ 15.661] (II) fglrx(0): swlDriScreenInit done
[ 15.661] (II) fglrx(0): Kernel Module Version Information:
[ 15.661] (II) fglrx(0): Name: fglrx
[ 15.661] (II) fglrx(0): Version: 8.98.2
[ 15.661] (II) fglrx(0): Date: Jul 27 2012
[ 15.661] (II) fglrx(0): Desc: AMD FireGL DRM kernel module
[ 15.661] (II) fglrx(0): Kernel Module version matches driver.
[ 15.661] (II) fglrx(0): Kernel Module Build Time Information:
[ 15.661] (II) fglrx(0): Build-Kernel UTS_RELEASE: 3.5.3-1-ARCH
[ 15.661] (II) fglrx(0): Build-Kernel MODVERSIONS: no
[ 15.661] (II) fglrx(0): Build-Kernel __SMP__: no
[ 15.661] (II) fglrx(0): Build-Kernel PAGE_SIZE: 0x1000
[ 15.662] (II) fglrx(0): [uki] register handle = 0x00004000
[ 15.684] (II) fglrx(0): DRI initialization successfull
[ 15.688] (II) fglrx(0): FBADPhys: 0xf400000000 FBMappedSize: 0x01008000
[ 15.698] (==) fglrx(0): Backing store disabled
[ 15.698] (II) Loading extension FGLRXEXTENSION
[ 15.698] (**) fglrx(0): DPMS enabled
[ 15.698] (II) fglrx(0): Initialized in-driver Xinerama extension
[ 15.698] (**) fglrx(0): Textured Video is enabled.
[ 15.698] (II) LoadModule: "glesx"
[ 15.698] (II) Loading /usr/lib/xorg/modules/glesx.so
[ 15.750] (II) Module glesx: vendor="X.Org Foundation"
[ 15.751] compiled for 1.4.99.906, module version = 1.0.0
[ 15.751] (II) Loading extension GLESX
[ 15.751] (II) fglrx(0): GLESX enableFlags = 592
[ 15.753] (II) fglrx(0): GLESX is enabled
[ 15.753] (II) LoadModule: "amdxmm"
[ 15.753] (II) Loading /usr/lib/xorg/modules/amdxmm.so
[ 15.758] (II) Module amdxmm: vendor="X.Org Foundation"
[ 15.758] compiled for 1.4.99.906, module version = 2.0.0
[ 15.773] (II) Loading extension AMDXVOPL
[ 15.773] (II) Loading extension AMDXVBA
[ 15.778] (II) fglrx(0): UVD feature is enabled(II) fglrx(0):
[ 15.784] (II) fglrx(0): Enable composite support successfully
[ 15.784] (WW) fglrx(0): Option "VendorName" is not used
[ 15.784] (WW) fglrx(0): Option "ModelName" is not used
[ 15.784] (II) fglrx(0): X context handle = 0x1
[ 15.784] (II) fglrx(0): [DRI] installation complete
[ 15.785] (==) fglrx(0): Silken mouse enabled
[ 15.785] (==) fglrx(0): Using HW cursor of display infrastructure!
[ 15.786] (II) fglrx(0): Disabling in-server RandR and enabling in-driver RandR 1.2.
[ 15.909] (II) fglrx(0): Framebuffer compression enabled: mcAddr=0xf40b9e0000 width=0xa00 height=0x1900
[ 15.909] (--) RandR disabled
[ 15.909] (II) Initializing built-in extension Generic Event Extension
[ 15.909] (II) Initializing built-in extension SHAPE
[ 15.909] (II) Initializing built-in extension MIT-SHM
[ 15.909] (II) Initializing built-in extension XInputExtension
[ 15.909] (II) Initializing built-in extension XTEST
[ 15.909] (II) Initializing built-in extension BIG-REQUESTS
[ 15.909] (II) Initializing built-in extension SYNC
[ 15.909] (II) Initializing built-in extension XKEYBOARD
[ 15.909] (II) Initializing built-in extension XC-MISC
[ 15.909] (II) Initializing built-in extension SECURITY
[ 15.909] (II) Initializing built-in extension XINERAMA
[ 15.909] (II) Initializing built-in extension XFIXES
[ 15.909] (II) Initializing built-in extension RENDER
[ 15.909] (II) Initializing built-in extension RANDR
[ 15.909] (II) Initializing built-in extension COMPOSITE
[ 15.909] (II) Initializing built-in extension DAMAGE
[ 15.911] ukiDynamicMajor: found major device number 250
[ 15.911] ukiDynamicMajor: found major device number 250
[ 15.911] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 15.911] ukiOpenDevice: node name is /dev/ati/card0
[ 15.911] ukiOpenDevice: open result is 13, (OK)
[ 15.911] ukiOpenByBusid: ukiOpenMinor returns 13
[ 15.911] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 16.449] (II) AIGLX: Loaded and initialized OpenGL driver(II) GLX: Initialized DRI GL provider for screen 0
[ 16.547] (II) fglrx(0): Enable the clock gating!
[ 16.547] (II) fglrx(0): Setting screen physical size to 444 x 277
[ 16.715] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[ 16.715] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 16.715] (II) LoadModule: "evdev"
[ 16.715] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 16.719] (II) Module evdev: vendor="X.Org Foundation"
[ 16.719] compiled for 1.12.3.901, module version = 2.7.3
[ 16.719] Module class: X.Org XInput Driver
[ 16.719] ABI class: X.Org XInput driver, version 16.0
[ 16.719] (II) Using input driver 'evdev' for 'Power Button'
[ 16.719] (**) Power Button: always reports core events
[ 16.720] (**) evdev: Power Button: Device: "/dev/input/event4"
[ 16.720] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 16.720] (--) evdev: Power Button: Found keys
[ 16.720] (II) evdev: Power Button: Configuring as keyboard
[ 16.720] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event4"
[ 16.720] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 16.720] (**) Option "xkb_rules" "evdev"
[ 16.720] (**) Option "xkb_model" "evdev"
[ 16.720] (**) Option "xkb_layout" "us"
[ 16.772] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 16.772] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 16.772] (II) Using input driver 'evdev' for 'Power Button'
[ 16.772] (**) Power Button: always reports core events
[ 16.772] (**) evdev: Power Button: Device: "/dev/input/event3"
[ 16.772] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 16.772] (--) evdev: Power Button: Found keys
[ 16.772] (II) evdev: Power Button: Configuring as keyboard
[ 16.772] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3/event3"
[ 16.772] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 16.772] (**) Option "xkb_rules" "evdev"
[ 16.772] (**) Option "xkb_model" "evdev"
[ 16.772] (**) Option "xkb_layout" "us"
[ 16.773] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=11 (/dev/input/event14)
[ 16.773] (II) No input driver specified, ignoring this device.
[ 16.773] (II) This device may have been added with another device file.
[ 16.774] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=10 (/dev/input/event15)
[ 16.774] (II) No input driver specified, ignoring this device.
[ 16.774] (II) This device may have been added with another device file.
[ 16.775] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=9 (/dev/input/event16)
[ 16.775] (II) No input driver specified, ignoring this device.
[ 16.775] (II) This device may have been added with another device file.
[ 16.775] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=8 (/dev/input/event17)
[ 16.775] (II) No input driver specified, ignoring this device.
[ 16.775] (II) This device may have been added with another device file.
[ 16.776] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=7 (/dev/input/event18)
[ 16.776] (II) No input driver specified, ignoring this device.
[ 16.776] (II) This device may have been added with another device file.
[ 16.776] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=3 (/dev/input/event19)
[ 16.776] (II) No input driver specified, ignoring this device.
[ 16.776] (II) This device may have been added with another device file.
[ 16.776] (II) config/udev: Adding input device USB Keyboard (/dev/input/event0)
[ 16.776] (**) USB Keyboard: Applying InputClass "evdev keyboard catchall"
[ 16.776] (II) Using input driver 'evdev' for ' USB Keyboard'
[ 16.776] (**) USB Keyboard: always reports core events
[ 16.776] (**) evdev: USB Keyboard: Device: "/dev/input/event0"
[ 16.776] (--) evdev: USB Keyboard: Vendor 0x1241 Product 0x1603
[ 16.776] (--) evdev: USB Keyboard: Found keys
[ 16.776] (II) evdev: USB Keyboard: Configuring as keyboard
[ 16.777] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.1/usb4/4-1/4-1:1.0/input/input0/event0"
[ 16.777] (II) XINPUT: Adding extended input device " USB Keyboard" (type: KEYBOARD, id 8)
[ 16.777] (**) Option "xkb_rules" "evdev"
[ 16.777] (**) Option "xkb_model" "evdev"
[ 16.777] (**) Option "xkb_layout" "us"
[ 16.777] (II) config/udev: Adding input device USB Keyboard (/dev/input/event1)
[ 16.777] (**) USB Keyboard: Applying InputClass "evdev keyboard catchall"
[ 16.777] (II) Using input driver 'evdev' for ' USB Keyboard'
[ 16.777] (**) USB Keyboard: always reports core events
[ 16.777] (**) evdev: USB Keyboard: Device: "/dev/input/event1"
[ 16.777] (--) evdev: USB Keyboard: Vendor 0x1241 Product 0x1603
[ 16.777] (--) evdev: USB Keyboard: Found keys
[ 16.777] (II) evdev: USB Keyboard: Configuring as keyboard
[ 16.777] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.1/usb4/4-1/4-1:1.1/input/input1/event1"
[ 16.777] (II) XINPUT: Adding extended input device " USB Keyboard" (type: KEYBOARD, id 9)
[ 16.777] (**) Option "xkb_rules" "evdev"
[ 16.777] (**) Option "xkb_model" "evdev"
[ 16.777] (**) Option "xkb_layout" "us"
[ 16.777] (II) config/udev: Adding input device Logitech USB-PS/2 Optical Mouse (/dev/input/event2)
[ 16.777] (**) Logitech USB-PS/2 Optical Mouse: Applying InputClass "evdev pointer catchall"
[ 16.777] (II) Using input driver 'evdev' for 'Logitech USB-PS/2 Optical Mouse'
[ 16.777] (**) Logitech USB-PS/2 Optical Mouse: always reports core events
[ 16.777] (**) evdev: Logitech USB-PS/2 Optical Mouse: Device: "/dev/input/event2"
[ 16.777] (--) evdev: Logitech USB-PS/2 Optical Mouse: Vendor 0x46d Product 0xc01e
[ 16.777] (--) evdev: Logitech USB-PS/2 Optical Mouse: Found 12 mouse buttons
[ 16.777] (--) evdev: Logitech USB-PS/2 Optical Mouse: Found scroll wheel(s)
[ 16.777] (--) evdev: Logitech USB-PS/2 Optical Mouse: Found relative axes
[ 16.777] (--) evdev: Logitech USB-PS/2 Optical Mouse: Found x and y relative axes
[ 16.777] (II) evdev: Logitech USB-PS/2 Optical Mouse: Configuring as mouse
[ 16.777] (II) evdev: Logitech USB-PS/2 Optical Mouse: Adding scrollwheel support
[ 16.778] (**) evdev: Logitech USB-PS/2 Optical Mouse: YAxisMapping: buttons 4 and 5
[ 16.778] (**) evdev: Logitech USB-PS/2 Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 16.778] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.1/usb4/4-3/4-3:1.0/input/input2/event2"
[ 16.778] (II) XINPUT: Adding extended input device "Logitech USB-PS/2 Optical Mouse" (type: MOUSE, id 10)
[ 16.778] (II) evdev: Logitech USB-PS/2 Optical Mouse: initialized for relative axes.
[ 16.778] (**) Logitech USB-PS/2 Optical Mouse: (accel) keeping acceleration scheme 1
[ 16.778] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration profile 0
[ 16.778] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration factor: 2.000
[ 16.778] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration threshold: 4
[ 16.778] (II) config/udev: Adding input device Logitech USB-PS/2 Optical Mouse (/dev/input/mouse0)
[ 16.778] (II) No input driver specified, ignoring this device.
[ 16.778] (II) This device may have been added with another device file.
[ 16.778] (II) config/udev: Adding input device UVC Camera (046d:09a4) (/dev/input/event20)
[ 16.778] (**) UVC Camera (046d:09a4): Applying InputClass "evdev keyboard catchall"
[ 16.778] (II) Using input driver 'evdev' for 'UVC Camera (046d:09a4)'
[ 16.778] (**) UVC Camera (046d:09a4): always reports core events
[ 16.778] (**) evdev: UVC Camera (046d:09a4): Device: "/dev/input/event20"
[ 16.778] (--) evdev: UVC Camera (046d:09a4): Vendor 0x46d Product 0x9a4
[ 16.778] (--) evdev: UVC Camera (046d:09a4): Found keys
[ 16.778] (II) evdev: UVC Camera (046d:09a4): Configuring as keyboard
[ 16.778] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.2/usb1/1-5/1-5:1.0/input/input20/event20"
[ 16.778] (II) XINPUT: Adding extended input device "UVC Camera (046d:09a4)" (type: KEYBOARD, id 11)
[ 16.778] (**) Option "xkb_rules" "evdev"
[ 16.778] (**) Option "xkb_model" "evdev"
[ 16.778] (**) Option "xkb_layout" "us"
[ 16.779] (II) config/udev: Adding input device HDA ATI SB Line Out Side (/dev/input/event10)
[ 16.779] (II) No input driver specified, ignoring this device.
[ 16.779] (II) This device may have been added with another device file.
[ 16.779] (II) config/udev: Adding input device HDA ATI SB Line Out CLFE (/dev/input/event11)
[ 16.779] (II) No input driver specified, ignoring this device.
[ 16.779] (II) This device may have been added with another device file.
[ 16.779] (II) config/udev: Adding input device HDA ATI SB Line Out Surround (/dev/input/event12)
[ 16.779] (II) No input driver specified, ignoring this device.
[ 16.779] (II) This device may have been added with another device file.
[ 16.779] (II) config/udev: Adding input device HDA ATI SB Line Out Front (/dev/input/event13)
[ 16.779] (II) No input driver specified, ignoring this device.
[ 16.779] (II) This device may have been added with another device file.
[ 16.779] (II) config/udev: Adding input device HDA ATI SB Line (/dev/input/event6)
[ 16.779] (II) No input driver specified, ignoring this device.
[ 16.779] (II) This device may have been added with another device file.
[ 16.779] (II) config/udev: Adding input device HDA ATI SB Front Mic (/dev/input/event7)
[ 16.779] (II) No input driver specified, ignoring this device.
[ 16.779] (II) This device may have been added with another device file.
[ 16.780] (II) config/udev: Adding input device HDA ATI SB Rear Mic (/dev/input/event8)
[ 16.780] (II) No input driver specified, ignoring this device.
[ 16.780] (II) This device may have been added with another device file.
[ 16.780] (II) config/udev: Adding input device HDA ATI SB Front Headphone (/dev/input/event9)
[ 16.780] (II) No input driver specified, ignoring this device.
[ 16.780] (II) This device may have been added with another device file.
[ 16.780] (II) config/udev: Adding input device PC Speaker (/dev/input/event5)
[ 16.780] (II) No input driver specified, ignoring this device.
[ 16.780] (II) This device may have been added with another device file.
[ 16.782] (II) fglrx(0): Restoring Recent Mode via PCS is not supported in RANDR 1.2 capable environments
[ 16.786] (II) fglrx(0): EDID vendor "ENC", prod id 6517
[ 16.786] (II) fglrx(0): Using EDID range info for horizontal sync
[ 16.786] (II) fglrx(0): Using EDID range info for vertical refresh
[ 16.786] (II) fglrx(0): Printing DDC gathered Modelines:
[ 16.786] (II) fglrx(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz eP)
[ 16.786] (II) fglrx(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 16.786] (II) fglrx(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 16.786] (II) fglrx(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 16.786] (II) fglrx(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 16.786] (II) fglrx(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 16.786] (II) fglrx(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 18.696] (II) fglrx(0): EDID vendor "ENC", prod id 6517
[ 18.696] (II) fglrx(0): Using hsync ranges from config file
[ 18.696] (II) fglrx(0): Using vrefresh ranges from config file
[ 18.696] (II) fglrx(0): Printing DDC gathered Modelines:
[ 18.696] (II) fglrx(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz eP)
[ 18.696] (II) fglrx(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 18.696] (II) fglrx(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 18.696] (II) fglrx(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 18.696] (II) fglrx(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 18.696] (II) fglrx(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 18.696] (II) fglrx(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 19.844] (II) fglrx(0): EDID vendor "ENC", prod id 6517
[ 19.844] (II) fglrx(0): Using hsync ranges from config file
[ 19.844] (II) fglrx(0): Using vrefresh ranges from config file
[ 19.844] (II) fglrx(0): Printing DDC gathered Modelines:
[ 19.844] (II) fglrx(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz eP)
[ 19.844] (II) fglrx(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 19.844] (II) fglrx(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 19.844] (II) fglrx(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 19.844] (II) fglrx(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 19.844] (II) fglrx(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 19.844] (II) fglrx(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
I can't see anything suspicious, hopefully someone of you knows better.
At last my xorg.conf :
Section "ServerLayout"
Identifier "aticonfig Layout"
Screen 0 "aticonfig-Screen[0]-0" 0 0
EndSection
Section "Module"
EndSection
Section "Monitor"
Identifier "aticonfig-Monitor[0]-0"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
EndSection
Section "Device"
Identifier "aticonfig-Device[0]-0"
Driver "fglrx"
BusID "PCI:1:0:0"
EndSection
Section "Screen"
Identifier "aticonfig-Screen[0]-0"
Device "aticonfig-Device[0]-0"
Monitor "aticonfig-Monitor[0]-0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Help and hints how to continue from here would be highly appreciated.
EDIT: By the way, I tried lots of things from the wiki. https://wiki.archlinux.org/index.php/Catalyst.
But there was one point I could't figure out how to implement:
The radeonfb framebuffer drivers have been known in the past to cause problems of this nature. If your kernel has radeonfb support compiled in, you may want to try a different kernel and see if this helps.
How can I disable radeonfb?
EDIT2: Well, almost 2 years later the open source driver is good enough to handle Minecraft and others very easily. Closed.
Last edited by Duxon (2014-07-10 21:31:02)
Offline
I read the open source drivers for the Southern Island Cards have been improved, but aren't ready for 3d accelerated use yet.
http://thread.gmane.org/gmane.comp.vide … evel/45138
Therefore users of the 7700 series have to stick to catalyst and I still have no idea what the cause of the freeze is. Can anyone help?
Offline