You are not logged in.

Pages: 1

#1 2012-10-24 01:45:50

e01f
Member
Registered: 2012-10-24
Posts: 4

Xorg hangs and is unkillable, but only when moving the mouse

Hello everyone!

I have a special problem related to Xorg, my graphics card and my mouse, as it seems.

My Setup

I have the following setup:

  • Archlinux 3.6.2-1-ARCH i686 (everything should be pretty much up-to-date)

  • Motherboard: Abit BH6 (quite old though)

  • 2 Video Adapters: One 3Dfx Voodoo 3 (rev 01), PCI at 0:f:0 and an ATI Rage 128, AGP at 1:0:0

  • Standard Microsoft PS/2 Mouse (has been working fine ever since I bought it around 2001!)

Edit: (forgot to mention)

My BIOS is set up to use the AGP Card to Boot, VGA BIOS Caching, Shadowing and Video RAM Shadowing are disabled alltogether.

End Edit

I installed Xorg as described in https://wiki.archlinux.org/index.php/Xorg. (Please find the contents of my /etc/X11/xorg.conf.d/10-configuration.conf below)

Section "ServerLayout"
        Identifier     "X.org Configured"
        Screen      0  "Screen0" 0 0
        Screen      1  "Screen1" RightOf "Screen0"
        InputDevice    "Mouse0" "CorePointer"
        InputDevice    "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"
        ModulePath   "/usr/lib/xorg/modules"
        FontPath     "/usr/share/fonts/misc/"
        FontPath     "/usr/share/fonts/TTF/"
        FontPath     "/usr/share/fonts/OTF/"
        FontPath     "/usr/share/fonts/Type1/"
        FontPath     "/usr/share/fonts/100dpi/"
        FontPath     "/usr/share/fonts/75dpi/"
EndSection

Section "Module"
        Load  "glx"
EndSection

Section "InputDevice"
        Identifier  "Keyboard0"
        Driver      "kbd"
EndSection

Section "InputDevice"
        Identifier  "Mouse0"
        Driver      "mouse"
        Option      "Protocol" "auto"
        Option      "Device" "/dev/input/mice"
        Option      "ZAxisMapping" "4 5 6 7"
EndSection

Section "Monitor"
        Identifier   "Monitor0"
        VendorName   "Monitor Vendor"
        ModelName    "Monitor Model"
EndSection

Section "Monitor"
        Identifier   "Monitor1"
        VendorName   "Monitor Vendor"
        ModelName    "Monitor Model"
EndSection

Section "Device"
        ### Available Driver options are:-
        ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
        ### <string>: "String", <freq>: "<f> Hz/kHz/MHz",
        ### <percent>: "<f>%"
        ### [arg]: arg optional
        #Option     "NoAccel"                   # [<bool>]
        #Option     "SWcursor"                  # [<bool>]
        #Option     "Dac6Bit"                   # [<bool>]
        #Option     "Dac8Bit"                   # [<bool>]
        #Option     "DMAForXv"                  # [<bool>]
        #Option     "ForcePCIMode"              # [<bool>]
        #Option     "CCEPIOMode"                # [<bool>]
        #Option     "CCENoSecurity"             # [<bool>]
        #Option     "CCEusecTimeout"            # <i>
        #Option     "AGPMode"                   # <i>
        #Option     "AGPSize"                   # <i>
        #Option     "RingSize"                  # <i>
        #Option     "BufferSize"                # <i>
        #Option     "EnablePageFlip"            # [<bool>]
        #Option     "Display"                   # <str>
        #Option     "PanelWidth"                # <i>
        #Option     "PanelHeight"               # <i>
        #Option     "ProgramFPRegs"             # [<bool>]
        #Option     "UseFBDev"                  # [<bool>]
        #Option     "VideoKey"                  # <i>
        #Option     "ShowCache"                 # [<bool>]
        #Option     "VGAAccess"                 # [<bool>]
        #Option     "AccelMethod"               # <str>
        #Option     "RenderAccel"               # [<bool>]
        Identifier  "Card0"
        Driver      "r128"
        BusID       "PCI:1:0:0"
EndSection

Section "Device"
        ### Available Driver options are:-
        ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
        ### <string>: "String", <freq>: "<f> Hz/kHz/MHz",
        ### <percent>: "<f>%"
        ### [arg]: arg optional
        #Option     "NoAccel"                   # [<bool>]
        #Option     "SWcursor"                  # [<bool>]
        #Option     "UsePIO"                    # [<bool>]
        #Option     "ShowCache"                 # [<bool>]
        #Option     "VideoKey"                  # <i>
        #Option     "NoSLI"                     # [<bool>]
        #Option     "TexturedVideo"             # [<bool>]
        #Option     "DRI"                       # [<bool>]
        Identifier  "Card1"
        Driver      "tdfx"
        BusID       "PCI:0:15:0"
EndSection

Section "Screen"
        Identifier "Screen0"
        Device     "Card0"
        Monitor    "Monitor0"
        SubSection "Display"
                Viewport   0 0
                Depth     1
        EndSubSection
        SubSection "Display"
                Viewport   0 0
                Depth     4
        EndSubSection
        SubSection "Display"
                Viewport   0 0
                Depth     8
        EndSubSection
        SubSection "Display"
                Viewport   0 0
                Depth     15
        EndSubSection
        SubSection "Display"
                Viewport   0 0
                Depth     16
        EndSubSection
        SubSection "Display"
                Viewport   0 0
                Depth     24
        EndSubSection
EndSection

Section "Screen"
        Identifier "Screen1"
        Device     "Card1"
        Monitor    "Monitor1"
        SubSection "Display"
                Viewport   0 0
                Depth     1
        EndSubSection
        SubSection "Display"
                Viewport   0 0
                Depth     4
        EndSubSection
        SubSection "Display"
                Viewport   0 0
                Depth     8
        EndSubSection
        SubSection "Display"
                Viewport   0 0
                Depth     15
        EndSubSection
        SubSection "Display"
                Viewport   0 0
                Depth     16
        EndSubSection
        SubSection "Display"
                Viewport   0 0
                Depth     24
        EndSubSection
EndSection

How to reproduce the problem

I initially had twm installed but now I have gdm, both of which (seem to) show the exact same behavior, when doing the following:

  • Start Xorg using xinit (or even startx, doesn't make a difference)

  • Start your dm, for example: 

    gdm dbus-launch gnome-control-center

  • Move your mouse around a bit, try to login, anything will do, and wait for it to hang up - it never takes longer than a Minute

After that, killing X using signal 15 or 9 won't work, I have to restart my computer to get another try.

The last lines of dmesg are:

...
[ 1550.681449] EXT4-fs (sda1): re-mounted. Opts: data=ordered,commit=0
[ 1550.715635] EXT4-fs (sdb1): re-mounted. Opts: data=ordered,commit=0
[ 1800.843311] INFO: task X:297 blocked for more than 120 seconds.
[ 1800.843333] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 1800.843345] X               D 016bde74     0   297    296 0x00400000
[ 1800.843368]  d26bded0 00000082 0826cde0 016bde74 00000000 c060c220 c06dd6c0 c06dd6c0
[ 1800.843401]  9c9af169 0000017e d3a826c0 d26a1f20 00000000 00000000 00000000 00000003
[ 1800.843431]  d26bdeb0 00000000 d26bdec0 d2ecc136 00000000 00000000 d26bdec4 c02f39af
[ 1800.843462] Call Trace:
[ 1800.843517]  [<c02f39af>] ? string.isra.4+0x2f/0xa0
[ 1800.843545]  [<c04d0fc3>] schedule+0x23/0x60
[ 1800.843576]  [<c039a077>] vga_get+0xe7/0x150
[ 1800.843616]  [<c016af00>] ? try_to_wake_up+0x240/0x240
[ 1800.843637]  [<c039a31e>] vga_arb_write+0x8e/0x4e0
[ 1800.843667]  [<c02abe34>] ? security_file_permission+0x24/0xb0
[ 1800.843703]  [<c02337c3>] ? rw_verify_area+0x63/0x110
[ 1800.843723]  [<c039a290>] ? vga_tryget+0xa0/0xa0
[ 1800.843743]  [<c0233b48>] vfs_write+0x88/0x160
[ 1800.843762]  [<c039a290>] ? vga_tryget+0xa0/0xa0
[ 1800.843783]  [<c0233e3d>] sys_write+0x3d/0x80
[ 1800.843808]  [<c04d7e1f>] sysenter_do_call+0x12/0x28
[ 1800.843828] INFO: task Xorg:439 blocked for more than 120 seconds.
[ 1800.843837] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 1800.843846] Xorg            D 01cebe74     0   439    438 0x00400000
[ 1800.843865]  d1cebed0 00003082 bf8b2890 01cebe74 00000000 d1cf8000 c06dd6c0 c06dd6c0
[ 1800.843896]  00000000 00000176 d3a826c0 d2156450 00004000 00000000 00000000 d1cebea4
[ 1800.843926]  c014b8e5 00000000 d1cebec0 d2ecc4b6 00000000 00000000 d1cebec4 c02f39af
[ 1800.843957] Call Trace:
[ 1800.843992]  [<c014b8e5>] ? __set_task_blocked+0x35/0x80
[ 1800.844016]  [<c02f39af>] ? string.isra.4+0x2f/0xa0
[ 1800.844037]  [<c04d0fc3>] schedule+0x23/0x60
[ 1800.844057]  [<c039a077>] vga_get+0xe7/0x150
[ 1800.844082]  [<c016af00>] ? try_to_wake_up+0x240/0x240
[ 1800.844102]  [<c039a31e>] vga_arb_write+0x8e/0x4e0
[ 1800.844124]  [<c02abe34>] ? security_file_permission+0x24/0xb0
[ 1800.844147]  [<c02337c3>] ? rw_verify_area+0x63/0x110
[ 1800.844167]  [<c039a290>] ? vga_tryget+0xa0/0xa0
[ 1800.844188]  [<c0233b48>] vfs_write+0x88/0x160
[ 1800.844207]  [<c039a290>] ? vga_tryget+0xa0/0xa0
[ 1800.844228]  [<c0233e3d>] sys_write+0x3d/0x80
[ 1800.844248]  [<c04d7e1f>] sysenter_do_call+0x12/0x28
[ 1920.843300] INFO: task X:297 blocked for more than 120 seconds.
[ 1920.843321] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 1920.843333] X               D 016bde74     0   297    296 0x00400000
[ 1920.843356]  d26bded0 00000082 0826cde0 016bde74 00000000 c060c220 c06dd6c0 c06dd6c0
[ 1920.843389]  9c9af169 0000017e d3a826c0 d26a1f20 00000000 00000000 00000000 00000003
[ 1920.843419]  d26bdeb0 00000000 d26bdec0 d2ecc136 00000000 00000000 d26bdec4 c02f39af
[ 1920.843450] Call Trace:
[ 1920.843503]  [<c02f39af>] ? string.isra.4+0x2f/0xa0
[ 1920.843530]  [<c04d0fc3>] schedule+0x23/0x60
[ 1920.843561]  [<c039a077>] vga_get+0xe7/0x150
[ 1920.843600]  [<c016af00>] ? try_to_wake_up+0x240/0x240
[ 1920.843620]  [<c039a31e>] vga_arb_write+0x8e/0x4e0
[ 1920.843650]  [<c02abe34>] ? security_file_permission+0x24/0xb0
[ 1920.843685]  [<c02337c3>] ? rw_verify_area+0x63/0x110
[ 1920.843705]  [<c039a290>] ? vga_tryget+0xa0/0xa0
[ 1920.843726]  [<c0233b48>] vfs_write+0x88/0x160
[ 1920.843745]  [<c039a290>] ? vga_tryget+0xa0/0xa0
[ 1920.843765]  [<c0233e3d>] sys_write+0x3d/0x80
[ 1920.843789]  [<c04d7e1f>] sysenter_do_call+0x12/0x28
[ 1920.843812] INFO: task Xorg:439 blocked for more than 120 seconds.
[ 1920.843821] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 1920.843830] Xorg            D 01cebe74     0   439    438 0x00400000
[ 1920.843849]  d1cebed0 00003082 bf8b2890 01cebe74 00000000 d1cf8000 c06dd6c0 c06dd6c0
[ 1920.843880]  00000000 00000176 d3a826c0 d2156450 00004000 00000000 00000000 d1cebea4
[ 1920.843910]  c014b8e5 00000000 d1cebec0 d2ecc4b6 00000000 00000000 d1cebec4 c02f39af
[ 1920.843941] Call Trace:
[ 1920.843975]  [<c014b8e5>] ? __set_task_blocked+0x35/0x80
[ 1920.844000]  [<c02f39af>] ? string.isra.4+0x2f/0xa0
[ 1920.844021]  [<c04d0fc3>] schedule+0x23/0x60
[ 1920.844042]  [<c039a077>] vga_get+0xe7/0x150
[ 1920.844066]  [<c016af00>] ? try_to_wake_up+0x240/0x240
[ 1920.844086]  [<c039a31e>] vga_arb_write+0x8e/0x4e0
[ 1920.844108]  [<c02abe34>] ? security_file_permission+0x24/0xb0
[ 1920.844132]  [<c02337c3>] ? rw_verify_area+0x63/0x110
[ 1920.844151]  [<c039a290>] ? vga_tryget+0xa0/0xa0
[ 1920.844171]  [<c0233b48>] vfs_write+0x88/0x160
[ 1920.844191]  [<c039a290>] ? vga_tryget+0xa0/0xa0
[ 1920.844211]  [<c0233e3d>] sys_write+0x3d/0x80
[ 1920.844232]  [<c04d7e1f>] sysenter_do_call+0x12/0x28
[ 2040.843288] INFO: task X:297 blocked for more than 120 seconds.
[ 2040.843308] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 2040.843319] X               D 016bde74     0   297    296 0x00400000
[ 2040.843341]  d26bded0 00000082 0826cde0 016bde74 00000000 c060c220 c06dd6c0 c06dd6c0
[ 2040.843374]  9c9af169 0000017e d3a826c0 d26a1f20 00000000 00000000 00000000 00000003
[ 2040.843404]  d26bdeb0 00000000 d26bdec0 d2ecc136 00000000 00000000 d26bdec4 c02f39af
[ 2040.843435] Call Trace:
[ 2040.843489]  [<c02f39af>] ? string.isra.4+0x2f/0xa0
[ 2040.843515]  [<c04d0fc3>] schedule+0x23/0x60
[ 2040.843544]  [<c039a077>] vga_get+0xe7/0x150
[ 2040.843581]  [<c016af00>] ? try_to_wake_up+0x240/0x240
[ 2040.843601]  [<c039a31e>] vga_arb_write+0x8e/0x4e0
[ 2040.843630]  [<c02abe34>] ? security_file_permission+0x24/0xb0
[ 2040.843665]  [<c02337c3>] ? rw_verify_area+0x63/0x110
[ 2040.843684]  [<c039a290>] ? vga_tryget+0xa0/0xa0
[ 2040.843705]  [<c0233b48>] vfs_write+0x88/0x160
[ 2040.843724]  [<c039a290>] ? vga_tryget+0xa0/0xa0
[ 2040.843745]  [<c0233e3d>] sys_write+0x3d/0x80
[ 2040.843768]  [<c04d7e1f>] sysenter_do_call+0x12/0x28
[ 2040.843790] INFO: task Xorg:439 blocked for more than 120 seconds.
[ 2040.843799] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 2040.843808] Xorg            D 01cebe74     0   439    438 0x00400000
[ 2040.843827]  d1cebed0 00003082 bf8b2890 01cebe74 00000000 d1cf8000 c06dd6c0 c06dd6c0
[ 2040.843858]  00000000 00000176 d3a826c0 d2156450 00004000 00000000 00000000 d1cebea4
[ 2040.843888]  c014b8e5 00000000 d1cebec0 d2ecc4b6 00000000 00000000 d1cebec4 c02f39af
[ 2040.843919] Call Trace:
[ 2040.843953]  [<c014b8e5>] ? __set_task_blocked+0x35/0x80
[ 2040.843977]  [<c02f39af>] ? string.isra.4+0x2f/0xa0
[ 2040.843997]  [<c04d0fc3>] schedule+0x23/0x60
[ 2040.844018]  [<c039a077>] vga_get+0xe7/0x150
[ 2040.844043]  [<c016af00>] ? try_to_wake_up+0x240/0x240
[ 2040.844063]  [<c039a31e>] vga_arb_write+0x8e/0x4e0
[ 2040.844085]  [<c02abe34>] ? security_file_permission+0x24/0xb0
[ 2040.844109]  [<c02337c3>] ? rw_verify_area+0x63/0x110
[ 2040.844129]  [<c039a290>] ? vga_tryget+0xa0/0xa0
[ 2040.844149]  [<c0233b48>] vfs_write+0x88/0x160
[ 2040.844168]  [<c039a290>] ? vga_tryget+0xa0/0xa0
[ 2040.844188]  [<c0233e3d>] sys_write+0x3d/0x80
[ 2040.844209]  [<c04d7e1f>] sysenter_do_call+0x12/0x28
[ 2160.843271] INFO: task X:297 blocked for more than 120 seconds.
[ 2160.843291] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 2160.843302] X               D 016bde74     0   297    296 0x00400000
[ 2160.843326]  d26bded0 00000082 0826cde0 016bde74 00000000 c060c220 c06dd6c0 c06dd6c0
[ 2160.843359]  9c9af169 0000017e d3a826c0 d26a1f20 00000000 00000000 00000000 00000003
[ 2160.843389]  d26bdeb0 00000000 d26bdec0 d2ecc136 00000000 00000000 d26bdec4 c02f39af
[ 2160.843419] Call Trace:
[ 2160.843473]  [<c02f39af>] ? string.isra.4+0x2f/0xa0
[ 2160.843499]  [<c04d0fc3>] schedule+0x23/0x60
[ 2160.843529]  [<c039a077>] vga_get+0xe7/0x150
[ 2160.843567]  [<c016af00>] ? try_to_wake_up+0x240/0x240
[ 2160.843587]  [<c039a31e>] vga_arb_write+0x8e/0x4e0
[ 2160.843615]  [<c02abe34>] ? security_file_permission+0x24/0xb0
[ 2160.843650]  [<c02337c3>] ? rw_verify_area+0x63/0x110
[ 2160.843670]  [<c039a290>] ? vga_tryget+0xa0/0xa0
[ 2160.843690]  [<c0233b48>] vfs_write+0x88/0x160
[ 2160.843710]  [<c039a290>] ? vga_tryget+0xa0/0xa0
[ 2160.843730]  [<c0233e3d>] sys_write+0x3d/0x80
[ 2160.843753]  [<c04d7e1f>] sysenter_do_call+0x12/0x28
[ 2160.843774] INFO: task Xorg:439 blocked for more than 120 seconds.
[ 2160.843783] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 2160.843793] Xorg            D 01cebe74     0   439    438 0x00400000
[ 2160.843812]  d1cebed0 00003082 bf8b2890 01cebe74 00000000 d1cf8000 c06dd6c0 c06dd6c0
[ 2160.843843]  00000000 00000176 d3a826c0 d2156450 00004000 00000000 00000000 d1cebea4
[ 2160.843873]  c014b8e5 00000000 d1cebec0 d2ecc4b6 00000000 00000000 d1cebec4 c02f39af
[ 2160.843903] Call Trace:
[ 2160.843938]  [<c014b8e5>] ? __set_task_blocked+0x35/0x80
[ 2160.843963]  [<c02f39af>] ? string.isra.4+0x2f/0xa0
[ 2160.843983]  [<c04d0fc3>] schedule+0x23/0x60
[ 2160.844003]  [<c039a077>] vga_get+0xe7/0x150
[ 2160.844028]  [<c016af00>] ? try_to_wake_up+0x240/0x240
[ 2160.844048]  [<c039a31e>] vga_arb_write+0x8e/0x4e0
[ 2160.844070]  [<c02abe34>] ? security_file_permission+0x24/0xb0
[ 2160.844094]  [<c02337c3>] ? rw_verify_area+0x63/0x110
[ 2160.844114]  [<c039a290>] ? vga_tryget+0xa0/0xa0
[ 2160.844133]  [<c0233b48>] vfs_write+0x88/0x160
[ 2160.844153]  [<c039a290>] ? vga_tryget+0xa0/0xa0
[ 2160.844173]  [<c0233e3d>] sys_write+0x3d/0x80
[ 2160.844194]  [<c04d7e1f>] sysenter_do_call+0x12/0x28
[ 2280.843266] INFO: task X:297 blocked for more than 120 seconds.
[ 2280.843285] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 2280.843296] X               D 016bde74     0   297    296 0x00400000
[ 2280.843319]  d26bded0 00000082 0826cde0 016bde74 00000000 c060c220 c06dd6c0 c06dd6c0
[ 2280.843352]  9c9af169 0000017e d3a826c0 d26a1f20 00000000 00000000 00000000 00000003
[ 2280.843382]  d26bdeb0 00000000 d26bdec0 d2ecc136 00000000 00000000 d26bdec4 c02f39af
[ 2280.843413] Call Trace:
[ 2280.843465]  [<c02f39af>] ? string.isra.4+0x2f/0xa0
[ 2280.843491]  [<c04d0fc3>] schedule+0x23/0x60
[ 2280.843521]  [<c039a077>] vga_get+0xe7/0x150
[ 2280.843558]  [<c016af00>] ? try_to_wake_up+0x240/0x240
[ 2280.843579]  [<c039a31e>] vga_arb_write+0x8e/0x4e0
[ 2280.843606]  [<c02abe34>] ? security_file_permission+0x24/0xb0
[ 2280.843641]  [<c02337c3>] ? rw_verify_area+0x63/0x110
[ 2280.843661]  [<c039a290>] ? vga_tryget+0xa0/0xa0
[ 2280.843681]  [<c0233b48>] vfs_write+0x88/0x160
[ 2280.843700]  [<c039a290>] ? vga_tryget+0xa0/0xa0
[ 2280.843720]  [<c0233e3d>] sys_write+0x3d/0x80
[ 2280.843743]  [<c04d7e1f>] sysenter_do_call+0x12/0x28
[ 2280.843764] INFO: task Xorg:439 blocked for more than 120 seconds.
[ 2280.843774] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 2280.843783] Xorg            D 01cebe74     0   439    438 0x00400000
[ 2280.843802]  d1cebed0 00003082 bf8b2890 01cebe74 00000000 d1cf8000 c06dd6c0 c06dd6c0
[ 2280.843833]  00000000 00000176 d3a826c0 d2156450 00004000 00000000 00000000 d1cebea4
[ 2280.843863]  c014b8e5 00000000 d1cebec0 d2ecc4b6 00000000 00000000 d1cebec4 c02f39af
[ 2280.843893] Call Trace:
[ 2280.843927]  [<c014b8e5>] ? __set_task_blocked+0x35/0x80
[ 2280.843952]  [<c02f39af>] ? string.isra.4+0x2f/0xa0
[ 2280.843972]  [<c04d0fc3>] schedule+0x23/0x60
[ 2280.843993]  [<c039a077>] vga_get+0xe7/0x150
[ 2280.844018]  [<c016af00>] ? try_to_wake_up+0x240/0x240
[ 2280.844038]  [<c039a31e>] vga_arb_write+0x8e/0x4e0
[ 2280.844059]  [<c02abe34>] ? security_file_permission+0x24/0xb0
[ 2280.844083]  [<c02337c3>] ? rw_verify_area+0x63/0x110
[ 2280.844103]  [<c039a290>] ? vga_tryget+0xa0/0xa0
[ 2280.844123]  [<c0233b48>] vfs_write+0x88/0x160
[ 2280.844142]  [<c039a290>] ? vga_tryget+0xa0/0xa0
[ 2280.844163]  [<c0233e3d>] sys_write+0x3d/0x80
[ 2280.844183]  [<c04d7e1f>] sysenter_do_call+0x12/0x28

My Logfiles

The contents of my /var/log/Xorg.0.log are (with Xorg still running but hung)

X.Org X Server 1.13.0
Release Date: 2012-09-05
[  1502.702] X Protocol Version 11, Revision 0
[  1502.703] Build Operating System: Linux 3.6.2-1-ARCH i686
[  1502.704] Current Operating System: Linux bora 3.6.2-1-ARCH #1 SMP PREEMPT Sat Oct 13 07:19:40 CEST 2012 i686
[  1502.705] Kernel command line: root=/dev/sda1 ro initrd=../initramfs-linux.img BOOT_IMAGE=../vmlinuz-linux
[  1502.706] Build Date: 19 October 2012  03:58:01PM
[  1502.707]
[  1502.708] Current version of pixman: 0.26.2
[  1502.709]    Before reporting problems, check http://wiki.x.org
        to make sure that you have the latest version.
[  1502.710] Markers: (--) probed, (**) from config file, (==) default setting,
        (++) from command line, (!!) notice, (II) informational,
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[  1502.713] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Oct 24 04:30:43 2012
[  1502.819] (==) Using config directory: "/etc/X11/xorg.conf.d"
[  1502.871] (==) ServerLayout "X.org Configured"
[  1502.871] (**) |-->Screen "Screen0" (0)
[  1502.871] (**) |   |-->Monitor "Monitor0"
[  1502.872] (**) |   |-->Device "Card0"
[  1502.873] (**) |-->Screen "Screen1" (1)
[  1502.873] (**) |   |-->Monitor "Monitor1"
[  1502.874] (**) |   |-->Device "Card1"
[  1502.874] (==) Automatically adding devices
[  1502.874] (==) Automatically enabling devices
[  1502.874] (==) Automatically adding GPU devices
[  1502.953] (WW) The directory "/usr/share/fonts/TTF/" does not exist.
[  1502.953]    Entry deleted from font path.
[  1502.953] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[  1502.954]    Entry deleted from font path.
[  1502.954] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[  1502.954]    Entry deleted from font path.
[  1502.955] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[  1502.955]    Entry deleted from font path.
[  1502.955]    (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[  1502.956] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[  1502.956]    Entry deleted from font path.
[  1502.956]    (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[  1502.956] (WW) The directory "/usr/share/fonts/TTF/" does not exist.
[  1502.956]    Entry deleted from font path.
[  1502.956] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[  1502.956]    Entry deleted from font path.
[  1502.956] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[  1502.956]    Entry deleted from font path.
[  1502.957] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[  1502.957]    Entry deleted from font path.
[  1502.957]    (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[  1502.957] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[  1502.957]    Entry deleted from font path.
[  1502.957]    (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[  1502.957] (**) FontPath set to:
        /usr/share/fonts/misc/,
        /usr/share/fonts/misc/
[  1502.957] (**) ModulePath set to "/usr/lib/xorg/modules"
[  1502.957] (II) The server relies on udev to provide the list of input devices.
        If no devices become available, reconfigure udev or disable AutoAddDevices.
[  1502.980] (II) Loader magic: 0x825a620
[  1502.980] (II) Module ABI versions:
[  1502.981]    X.Org ANSI C Emulation: 0.4
[  1502.981]    X.Org Video Driver: 13.0
[  1502.981]    X.Org XInput driver : 18.0
[  1502.981]    X.Org Server Extension : 7.0
[  1502.987] (--) PCI: (0:0:15:0) 121a:0005:121a:0036 rev 1, Mem @ 0xda000000/33554432, 0xdc000000/33554432, I/O @ 0x0000ec00/256, BIOS @ 0x????????/65536
[  1502.987] (--) PCI:*(0:1:0:0) 1002:5246:1002:0008 rev 0, Mem @ 0xd4000000/67108864, 0xd9000000/16384, I/O @ 0x0000d000/256, BIOS @ 0x????????/131072
[  1502.988] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[  1502.999] Initializing built-in extension Generic Event Extension
[  1503.000] Initializing built-in extension SHAPE
[  1503.001] Initializing built-in extension MIT-SHM
[  1503.002] Initializing built-in extension XInputExtension
[  1503.002] Initializing built-in extension XTEST
[  1503.003] Initializing built-in extension BIG-REQUESTS
[  1503.004] Initializing built-in extension SYNC
[  1503.005] Initializing built-in extension XKEYBOARD
[  1503.006] Initializing built-in extension XC-MISC
[  1503.006] Initializing built-in extension SECURITY
[  1503.007] Initializing built-in extension XINERAMA
[  1503.008] Initializing built-in extension XFIXES
[  1503.009] Initializing built-in extension RENDER
[  1503.009] Initializing built-in extension RANDR
[  1503.010] Initializing built-in extension COMPOSITE
[  1503.010] Initializing built-in extension DAMAGE
[  1503.010] Initializing built-in extension MIT-SCREEN-SAVER
[  1503.011] Initializing built-in extension DOUBLE-BUFFER
[  1503.011] Initializing built-in extension RECORD
[  1503.012] Initializing built-in extension DPMS
[  1503.012] Initializing built-in extension X-Resource
[  1503.013] Initializing built-in extension XVideo
[  1503.013] Initializing built-in extension XVideo-MotionCompensation
[  1503.014] Initializing built-in extension XFree86-VidModeExtension
[  1503.014] Initializing built-in extension XFree86-DGA
[  1503.015] Initializing built-in extension XFree86-DRI
[  1503.015] Initializing built-in extension DRI2
[  1503.015] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
[  1503.015] (II) LoadModule: "glx"
[  1503.033] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[  1503.133] (II) Module glx: vendor="X.Org Foundation"
[  1503.133]    compiled for 1.13.0, module version = 1.0.0
[  1503.133]    ABI class: X.Org Server Extension, version 7.0
[  1503.133] (==) AIGLX enabled
[  1503.135] Loading extension GLX
[  1503.135] (II) LoadModule: "r128"
[  1503.153] (II) Loading /usr/lib/xorg/modules/drivers/r128_drv.so
[  1503.218] (II) Module r128: vendor="X.Org Foundation"
[  1503.218]    compiled for 1.13.0, module version = 6.9.1
[  1503.218]    Module class: X.Org Video Driver
[  1503.218]    ABI class: X.Org Video Driver, version 13.0
[  1503.219] (II) LoadModule: "tdfx"
[  1503.220] (II) Loading /usr/lib/xorg/modules/drivers/tdfx_drv.so
[  1503.269] (II) Module tdfx: vendor="X.Org Foundation"
[  1503.269]    compiled for 1.13.0, module version = 1.4.5
[  1503.269]    Module class: X.Org Video Driver
[  1503.270]    ABI class: X.Org Video Driver, version 13.0
[  1503.270] (II) R128: Driver for ATI Rage 128 chipsets:
        ATI Rage 128 Mobility M3 LE (PCI), ATI Rage 128 Mobility M3 LF (AGP),
        ATI Rage 128 Mobility M4 MF (AGP), ATI Rage 128 Mobility M4 ML (AGP),
        ATI Rage 128 Pro GL PA (PCI/AGP), ATI Rage 128 Pro GL PB (PCI/AGP),
        ATI Rage 128 Pro GL PC (PCI/AGP), ATI Rage 128 Pro GL PD (PCI),
        ATI Rage 128 Pro GL PE (PCI/AGP), ATI Rage 128 Pro GL PF (AGP),
        ATI Rage 128 Pro VR PG (PCI/AGP), ATI Rage 128 Pro VR PH (PCI/AGP),
        ATI Rage 128 Pro VR PI (PCI/AGP), ATI Rage 128 Pro VR PJ (PCI/AGP),
        ATI Rage 128 Pro VR PK (PCI/AGP), ATI Rage 128 Pro VR PL (PCI/AGP),
        ATI Rage 128 Pro VR PM (PCI/AGP), ATI Rage 128 Pro VR PN (PCI/AGP),
        ATI Rage 128 Pro VR PO (PCI/AGP), ATI Rage 128 Pro VR PP (PCI),
        ATI Rage 128 Pro VR PQ (PCI/AGP), ATI Rage 128 Pro VR PR (PCI),
        ATI Rage 128 Pro VR PS (PCI/AGP), ATI Rage 128 Pro VR PT (PCI/AGP),
        ATI Rage 128 Pro VR PU (PCI/AGP), ATI Rage 128 Pro VR PV (PCI/AGP),
        ATI Rage 128 Pro VR PW (PCI/AGP), ATI Rage 128 Pro VR PX (PCI/AGP),
        ATI Rage 128 GL RE (PCI), ATI Rage 128 GL RF (AGP),
        ATI Rage 128 RG (AGP), ATI Rage 128 VR RK (PCI),
        ATI Rage 128 VR RL (AGP), ATI Rage 128 4X SE (PCI/AGP),
        ATI Rage 128 4X SF (PCI/AGP), ATI Rage 128 4X SG (PCI/AGP),
        ATI Rage 128 4X SH (PCI/AGP), ATI Rage 128 4X SK (PCI/AGP),
        ATI Rage 128 4X SL (PCI/AGP), ATI Rage 128 4X SM (AGP),
        ATI Rage 128 4X SN (PCI/AGP), ATI Rage 128 Pro ULTRA TF (AGP),
        ATI Rage 128 Pro ULTRA TL (AGP), ATI Rage 128 Pro ULTRA TR (AGP),
        ATI Rage 128 Pro ULTRA TS (AGP?), ATI Rage 128 Pro ULTRA TT (AGP?),
        ATI Rage 128 Pro ULTRA TU (AGP?)
[  1503.275] (II) TDFX: Driver for 3dfx Banshee/Voodoo3 chipsets: 3dfx Banshee,
        3dfx Voodoo3, 3dfx Voodoo5
[  1503.276] (--) using VT number 2

[  1503.281] (II) TDFX(1): PIO base = 0xec00
[  1503.281] (II) R128(0): PCI bus 1 card 0 func 0
[  1503.282] (==) R128(0): Depth 24, (--) framebuffer bpp 32
[  1503.282] (II) R128(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[  1503.282] (==) R128(0): Default visual is TrueColor
[  1503.282] (II) Loading sub module "vgahw"
[  1503.282] (II) LoadModule: "vgahw"
[  1503.287] (II) Loading /usr/lib/xorg/modules/libvgahw.so
[  1503.331] (II) Module vgahw: vendor="X.Org Foundation"
[  1503.331]    compiled for 1.13.0, module version = 0.1.0
[  1503.331]    ABI class: X.Org Video Driver, version 13.0
[  1503.332] (II) R128(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0
[  1503.332] (==) R128(0): RGB weight 888
[  1503.332] (II) R128(0): Using 8 bits per RGB (8 bit DAC)
[  1503.332] (II) Loading sub module "int10"
[  1503.332] (II) LoadModule: "int10"
[  1503.333] (II) Loading /usr/lib/xorg/modules/libint10.so
[  1503.368] (II) Module int10: vendor="X.Org Foundation"
[  1503.369]    compiled for 1.13.0, module version = 1.0.0
[  1503.369]    ABI class: X.Org Video Driver, version 13.0
[  1503.369] (II) R128(0): initializing int10
[  1503.392] (II) R128(0): Primary V_BIOS segment is: 0xc000
[  1503.392] (--) R128(0): Chipset: "ATI Rage 128 GL RF (AGP)" (ChipID = 0x5246)
[  1503.392] (--) R128(0): Linear framebuffer at 0xd4000000
[  1503.392] (--) R128(0): MMIO registers at 0xd9000000
[  1503.393] (--) R128(0): VideoRAM: 16384 kByte (128-bit SDR SGRAM 1:1)
[  1503.393] (**) R128(0): Using external CRT for display
[  1503.424] (II) R128(0): Primary Display == Type 1
[  1503.424] (WW) R128(0): Can't determine panel dimensions, and none specified.
        Disabling programming of FP registers.
[  1503.424] (II) R128(0): PLL parameters: rf=2950 rd=65 min=12500 max=25000; xclk=9000
[  1503.424] (II) Loading sub module "ddc"
[  1503.424] (II) LoadModule: "ddc"
[  1503.424] (II) Module "ddc" already built-in
[  1503.424] (II) Loading sub module "vbe"
[  1503.425] (II) LoadModule: "vbe"
[  1503.425] (II) Loading /usr/lib/xorg/modules/libvbe.so
[  1503.438] (II) Module vbe: vendor="X.Org Foundation"
[  1503.439]    compiled for 1.13.0, module version = 1.1.0
[  1503.439]    ABI class: X.Org Video Driver, version 13.0
[  1503.440] (II) R128(0): VESA BIOS detected
[  1503.440] (II) R128(0): VESA VBE Version 2.0
[  1503.440] (II) R128(0): VESA VBE Total Mem: 16384 kB
[  1503.440] (II) R128(0): VESA VBE OEM: ATI RAGE128
[  1503.440] (II) R128(0): VESA VBE OEM Software Rev: 1.0
[  1503.440] (II) R128(0): VESA VBE OEM Vendor: ATI Technologies Inc.
[  1503.440] (II) R128(0): VESA VBE OEM Product: R128
[  1503.440] (II) R128(0): VESA VBE OEM Product Rev: 01.00
[  1503.441] (II) Loading sub module "ddc"
[  1503.441] (II) LoadModule: "ddc"
[  1503.441] (II) Module "ddc" already built-in
[  1503.534] (II) R128(0): VESA VBE DDC supported
[  1503.534] (II) R128(0): VESA VBE DDC Level 2
[  1503.534] (II) R128(0): VESA VBE DDC transfer in appr. 2 sec.
[  1504.071] (II) R128(0): VESA VBE DDC read successfully
[  1504.072] (II) R128(0): Manufacturer: AOC  Model: a781  Serial#: 11653
[  1504.072] (II) R128(0): Year: 2003  Week: 18
[  1504.072] (II) R128(0): EDID Version: 1.3
[  1504.072] (II) R128(0): Analog Display Input,  Input Voltage Level: 0.700/0.700 V
[  1504.072] (II) R128(0): Sync:  Separate
[  1504.072] (II) R128(0): Max Image Size [cm]: horiz.: 34  vert.: 27
[  1504.072] (II) R128(0): Gamma: 2.20
[  1504.073] (II) R128(0): DPMS capabilities: Off; RGB/Color Display
[  1504.073] (II) R128(0): First detailed timing is preferred mode
[  1504.073] (II) R128(0): redX: 0.631 redY: 0.354   greenX: 0.294 greenY: 0.596
[  1504.073] (II) R128(0): blueX: 0.143 blueY: 0.087   whiteX: 0.300 whiteY: 0.340
[  1504.073] (II) R128(0): Supported established timings:
[  1504.073] (II) R128(0): 720x400@70Hz
[  1504.074] (II) R128(0): 640x480@60Hz
[  1504.074] (II) R128(0): 640x480@67Hz
[  1504.074] (II) R128(0): 640x480@72Hz
[  1504.074] (II) R128(0): 640x480@75Hz
[  1504.074] (II) R128(0): 800x600@56Hz
[  1504.074] (II) R128(0): 800x600@60Hz
[  1504.074] (II) R128(0): 800x600@72Hz
[  1504.074] (II) R128(0): 800x600@75Hz
[  1504.074] (II) R128(0): 832x624@75Hz
[  1504.075] (II) R128(0): 1024x768@60Hz
[  1504.075] (II) R128(0): 1024x768@70Hz
[  1504.075] (II) R128(0): 1024x768@75Hz
[  1504.075] (II) R128(0): 1280x1024@75Hz
[  1504.075] (II) R128(0): Manufacturer's mask: 0
[  1504.075] (II) R128(0): Supported standard timings:
[  1504.075] (II) R128(0): #0: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
[  1504.075] (II) R128(0): Supported detailed timing:
[  1504.075] (II) R128(0): clock: 135.0 MHz   Image Size:  340 x 270 mm
[  1504.076] (II) R128(0): h_active: 1280  h_sync: 1296  h_sync_end 1440 h_blank_end 1688 h_border: 0
[  1504.076] (II) R128(0): v_active: 1024  v_sync: 1025  v_sync_end 1028 v_blanking: 1066 v_border: 0
[  1504.076] (II) R128(0): Serial No: T7SJ34AZ11653
[  1504.076] (II) R128(0): Ranges: V min: 55 V max: 75 Hz, H min: 30 H max: 83 kHz, PixClock max 135 MHz
[  1504.076] (II) R128(0): Monitor name: LM720/LM720A
[  1504.076] (II) R128(0): EDID (in hex):
[  1504.077] (II) R128(0):      00ffffffffffff0005e381a7852d0000
[  1504.077] (II) R128(0):      120d010368221b782aa69ca15a4b9824
[  1504.077] (II) R128(0):      164c57bfef0081800101010101010101
[  1504.077] (II) R128(0):      010101010101bc34009851002a401090
[  1504.077] (II) R128(0):      1300540e11000018000000ff00543753
[  1504.077] (II) R128(0):      4a3334415a3131363533000000fd0037
[  1504.077] (II) R128(0):      4b1e530d000a202020202020000000fc
[  1504.077] (II) R128(0):      004c4d3732302f4c4d373230410a00d5
[  1504.078] (II) R128(0): EDID vendor "AOC", prod id 42881
[  1504.078] (II) R128(0): Using EDID range info for horizontal sync
[  1504.078] (II) R128(0): Using EDID range info for vertical refresh
[  1504.078] (II) R128(0): Printing DDC gathered Modelines:
[  1504.078] (II) R128(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 -hsync -vsync (80.0 kHz eP)
... (more Modelines)
[  1504.080] (II) R128(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[  1504.081] (==) R128(0): Using gamma correction (1.0, 1.0, 1.0)
[  1504.081] (II) R128(0): Monitor0: Using hsync range of 30.00-83.00 kHz
[  1504.081] (II) R128(0): Monitor0: Using vrefresh range of 55.00-75.00 Hz
[  1504.081] (II) R128(0): Monitor0: Using maximum pixel clock of 135.00 MHz
[  1504.081] (II) R128(0): Estimated virtual size for aspect ratio 1.2593 is 1280x1024
[  1504.081] (II) R128(0): Clock range:  12.50 to 250.00 MHz
[  1504.082] (II) R128(0): Not using default mode "640x350" (vrefresh out of range)
... (more Not using... - messages)
[  1504.087] (II) R128(0): Not using default mode "1024x768" (hsync out of range)
[  1504.088] (--) R128(0): Virtual size is 1280x1024 (pitch 1280)
[  1504.089] (**) R128(0): *Driver mode "1280x1024": 135.0 MHz, 80.0 kHz, 75.0 Hz
[  1504.089] (II) R128(0): Modeline "1280x1024"x75.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 -hsync -vsync (80.0 kHz ezP)
... (more Modelines)
[  1504.103] (II) R128(0): Modeline "320x240"x60.1   12.59  320 328 376 400  240 245 246 262 doublescan -hsync -vsync (31.5 kHz zd)
[  1504.103] (**) R128(0): Display dimensions: (340, 270) mm
[  1504.103] (**) R128(0): DPI set to (95, 96)
[  1504.103] (II) Loading sub module "fb"
[  1504.104] (II) LoadModule: "fb"
[  1504.104] (II) Loading /usr/lib/xorg/modules/libfb.so
[  1504.161] (II) Module fb: vendor="X.Org Foundation"
[  1504.161]    compiled for 1.13.0, module version = 1.0.0
[  1504.161]    ABI class: X.Org ANSI C Emulation, version 0.4
[  1504.161] (II) Loading sub module "ramdac"
[  1504.161] (II) LoadModule: "ramdac"
[  1504.161] (II) Module "ramdac" already built-in
[  1504.162] (II) Loading sub module "shadowfb"
[  1504.162] (II) LoadModule: "shadowfb"
[  1504.162] (II) Loading /usr/lib/xorg/modules/libshadowfb.so
[  1504.176] (II) Module shadowfb: vendor="X.Org Foundation"
[  1504.176]    compiled for 1.13.0, module version = 1.0.0
[  1504.176]    ABI class: X.Org ANSI C Emulation, version 0.4
[  1504.176] (II) R128(0): Page flipping disabled
[  1504.177] (!!) R128(0): For information on using the multimedia capabilities
        of this adapter, please see http://gatos.sf.net.
[  1504.177] (II) Loading sub module "vgahw"
[  1504.177] (II) LoadModule: "vgahw"
[  1504.178] (II) Loading /usr/lib/xorg/modules/libvgahw.so
[  1504.178] (II) Module vgahw: vendor="X.Org Foundation"
[  1504.179]    compiled for 1.13.0, module version = 0.1.0
[  1504.179]    ABI class: X.Org Video Driver, version 13.0
[  1504.179] (II) Loading sub module "int10"
[  1504.179] (II) LoadModule: "int10"
[  1504.180] (II) Loading /usr/lib/xorg/modules/libint10.so
[  1504.180] (II) Module int10: vendor="X.Org Foundation"
[  1504.180]    compiled for 1.13.0, module version = 1.0.0
[  1504.180]    ABI class: X.Org Video Driver, version 13.0
[  1504.180] (II) TDFX(1): Softbooting the board (through the int10 interface).
[  1508.298] (II) TDFX(1): Softbooting the board succeeded.
[  1508.298] (==) TDFX(1): Depth 24, (--) framebuffer bpp 32
[  1508.298] (==) TDFX(1): RGB weight 888
[  1508.298] (==) TDFX(1): Default visual is TrueColor
[  1508.299] (--) TDFX(1): Chipset: "3dfx Voodoo3"
[  1508.299] (--) TDFX(1): Linear framebuffer at 0xDC000000
[  1508.299] (--) TDFX(1): MMIO registers at addr 0xDA000000
[  1508.299] (--) TDFX(1): PIO registers at addr 0xEC00
[  1508.299] (II) TDFX(1): DRAMINIT1 read 0x40530031, programming 0x40202031 (not Banshee)
[  1508.300] (II) TDFX(1): TDFXInitChips: numchips = 1
[  1508.300] (II) TDFX(1): TDFXInitChips: cfgbits = 0x00000000, initbits = 0x00000001
[  1508.300] (II) TDFX(1): TDFXInitChips: mem0base = 0xda000000, mem1base = 0xdc000008
[  1508.300] (II) TDFX(1): TDFXInitChips: mem0size = 0x02000000, mem1size = 0x02000000
[  1508.300] (II) TDFX(1): TDFXInitChips: mem0bits = 0x00000005, mem1bits = 0x00000050
[  1508.300] (II) TDFX(1): TDFXInitChips: cfgbits = 0x00000055
[  1508.301] (II) TDFX(1): TDFXInitChips: MMIOAddr[0] = 0xda000000
[  1508.301] (II) TDFX(1): TDFXInitChips: LinearAddr[0] = 0xdc000008
[  1508.301] (--) TDFX(1): VideoRAM: 16384 kByte Mapping 32768 kByte
[  1508.302] (==) TDFX(1): Using gamma correction (1.0, 1.0, 1.0)
[  1508.302] (II) Loading sub module "fb"
[  1508.302] (II) LoadModule: "fb"
[  1508.302] (II) Loading /usr/lib/xorg/modules/libfb.so
[  1508.302] (II) Module fb: vendor="X.Org Foundation"
[  1508.303]    compiled for 1.13.0, module version = 1.0.0
[  1508.303]    ABI class: X.Org ANSI C Emulation, version 0.4
[  1508.303] (II) Loading sub module "xaa"
[  1508.303] (II) LoadModule: "xaa"
[  1508.336] (WW) Warning, couldn't open module xaa
[  1508.336] (II) UnloadModule: "xaa"
[  1508.336] (II) Unloading xaa
[  1508.336] (EE) TDFX: Failed to load module "xaa" (module does not exist, 0)
[  1508.336] (WW) TDFX(1): No acceleration available
[  1508.336] (**) TDFX(1): ShowCache Disabled
[  1508.337] (**) TDFX(1): video key default 0x1e
[  1508.337] (II) Loading sub module "ramdac"
[  1508.337] (II) LoadModule: "ramdac"
[  1508.337] (II) Module "ramdac" already built-in
[  1508.337] (II) Loading sub module "i2c"
[  1508.337] (II) LoadModule: "i2c"
[  1508.337] (II) Module "i2c" already built-in
[  1508.337] (II) Loading sub module "ddc"
[  1508.338] (II) LoadModule: "ddc"
[  1508.338] (II) Module "ddc" already built-in
[  1508.338] (II) TDFX(1): I2C bus "DDC" initialized.
[  1508.338] (II) TDFX(1): I2C device "DDC:ddc2" registered at address 0xA0.
[  1508.404] (II) TDFX(1): Manufacturer: AOC  Model: a781  Serial#: 2230
[  1508.404] (II) TDFX(1): Year: 2003  Week: 20
[  1508.404] (II) TDFX(1): EDID Version: 1.3
[  1508.404] (II) TDFX(1): Analog Display Input,  Input Voltage Level: 0.700/0.700 V
[  1508.404] (II) TDFX(1): Sync:  Separate
[  1508.405] (II) TDFX(1): Max Image Size [cm]: horiz.: 34  vert.: 27
[  1508.405] (II) TDFX(1): Gamma: 2.20
[  1508.405] (II) TDFX(1): DPMS capabilities: Off; RGB/Color Display
[  1508.405] (II) TDFX(1): First detailed timing is preferred mode
[  1508.405] (II) TDFX(1): redX: 0.631 redY: 0.354   greenX: 0.294 greenY: 0.596
[  1508.405] (II) TDFX(1): blueX: 0.143 blueY: 0.087   whiteX: 0.300 whiteY: 0.340
[  1508.406] (II) TDFX(1): Supported established timings:
[  1508.406] (II) TDFX(1): 720x400@70Hz
[  1508.406] (II) TDFX(1): 640x480@60Hz
[  1508.406] (II) TDFX(1): 640x480@67Hz
[  1508.406] (II) TDFX(1): 640x480@72Hz
[  1508.406] (II) TDFX(1): 640x480@75Hz
[  1508.406] (II) TDFX(1): 800x600@56Hz
[  1508.406] (II) TDFX(1): 800x600@60Hz
[  1508.407] (II) TDFX(1): 800x600@72Hz
[  1508.407] (II) TDFX(1): 800x600@75Hz
[  1508.407] (II) TDFX(1): 832x624@75Hz
[  1508.407] (II) TDFX(1): 1024x768@60Hz
[  1508.407] (II) TDFX(1): 1024x768@70Hz
[  1508.407] (II) TDFX(1): 1024x768@75Hz
[  1508.407] (II) TDFX(1): 1280x1024@75Hz
[  1508.407] (II) TDFX(1): Manufacturer's mask: 0
[  1508.407] (II) TDFX(1): Supported standard timings:
[  1508.408] (II) TDFX(1): #0: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
[  1508.408] (II) TDFX(1): Supported detailed timing:
[  1508.408] (II) TDFX(1): clock: 135.0 MHz   Image Size:  340 x 270 mm
[  1508.408] (II) TDFX(1): h_active: 1280  h_sync: 1296  h_sync_end 1440 h_blank_end 1688 h_border: 0
[  1508.408] (II) TDFX(1): v_active: 1024  v_sync: 1025  v_sync_end 1028 v_blanking: 1066 v_border: 0
[  1508.408] (II) TDFX(1): Serial No: T7AJ35AD02230
[  1508.408] (II) TDFX(1): Ranges: V min: 55 V max: 75 Hz, H min: 30 H max: 83 kHz, PixClock max 135 MHz
[  1508.409] (II) TDFX(1): Monitor name: LM720/LM720A
[  1508.409] (II) TDFX(1): EDID (in hex):
[  1508.409] (II) TDFX(1):      00ffffffffffff0005e381a7b6080000
[  1508.409] (II) TDFX(1):      140d010368221b782aa69ca15a4b9824
[  1508.409] (II) TDFX(1):      164c57bfef0081800101010101010101
[  1508.409] (II) TDFX(1):      010101010101bc34009851002a401090
[  1508.409] (II) TDFX(1):      1300540e11000018000000ff00543741
[  1508.410] (II) TDFX(1):      4a333541443032323330000000fd0037
[  1508.410] (II) TDFX(1):      4b1e530d000a202020202020000000fc
[  1508.410] (II) TDFX(1):      004c4d3732302f4c4d373230410a00f7
[  1508.410] (II) TDFX(1): EDID vendor "AOC", prod id 42881
[  1508.410] (II) TDFX(1): Using EDID range info for horizontal sync
[  1508.410] (II) TDFX(1): Using EDID range info for vertical refresh
[  1508.410] (II) TDFX(1): Printing DDC gathered Modelines:
[  1508.411] (II) TDFX(1): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 -hsync -vsync (80.0 kHz eP)
... (more Modelines)
[  1508.413] (II) TDFX(1): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[  1508.413] (II) TDFX(1): Monitor1: Using hsync range of 30.00-83.00 kHz
[  1508.413] (II) TDFX(1): Monitor1: Using vrefresh range of 55.00-75.00 Hz
[  1508.413] (II) TDFX(1): Monitor1: Using maximum pixel clock of 135.00 MHz
[  1508.413] (II) TDFX(1): Estimated virtual size for aspect ratio 1.2593 is 1280x1024
[  1508.413] (II) TDFX(1): Clock range:  12.00 to 300.00 MHz
[  1508.414] (II) TDFX(1): Not using default mode "640x350" (vrefresh out of range)
... (more TDFX Not using... - messages)
[  1508.419] (II) TDFX(1): Not using default mode "1024x768" (hsync out of range)
[  1508.420] (--) TDFX(1): Virtual size is 1280x1024 (pitch 1280)
[  1508.421] (**) TDFX(1): *Driver mode "1280x1024": 135.0 MHz, 80.0 kHz, 75.0 Hz
[  1508.421] (II) TDFX(1): Modeline "1280x1024"x75.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 -hsync -vsync (80.0 kHz ezP)
[  1508.421] (**) TDFX(1): *Driver mode "1280x1024": 135.0 MHz, 80.0 kHz, 75.0 Hz
... (more modelines from TDFX)
[  1508.435] (**) TDFX(1): *Default mode "320x240": 12.6 MHz, 31.5 kHz, 60.1 Hz (D)
[  1508.435] (II) TDFX(1): Modeline "320x240"x60.1   12.59  320 328 376 400  240 245 246 262 doublescan -hsync -vsync (31.5 kHz zd)
[  1508.435] (**) TDFX(1): Display dimensions: (340, 270) mm
[  1508.435] (**) TDFX(1): DPI set to (95, 96)
[  1508.435] (--) Depth 24 pixmap format is 32 bpp
[  1508.436] (II) R128(0): Acceleration of RENDER operations will be enabledupon successful loading of DRI and EXA
[  1508.546] (WW) R128(0): Direct rendering is not supported when VGA arb is necessary for the device
[  1508.547] (EE) R128(0): [dri] DRIScreenInit failed.  Disabling DRI.
[  1508.577] (II) R128(0): Filling in EXA memory info
[  1508.577] (II) R128(0): Loading EXA module...
[  1508.577] (II) Loading sub module "exa"
[  1508.577] (II) LoadModule: "exa"
[  1508.578] (II) Loading /usr/lib/xorg/modules/libexa.so
[  1508.632] (II) Module exa: vendor="X.Org Foundation"
[  1508.632]    compiled for 1.13.0, module version = 2.6.0
[  1508.632]    ABI class: X.Org Video Driver, version 13.0
[  1508.632] (II) R128(0): Allocating EXA driver...
[  1508.632] (II) R128(0): Acceleration enabled
[  1508.633] (II) R128(0): Filled in offs
[  1508.633] (II) R128(0): Going to init EXA...
[  1508.633] (II) R128(0): Setting up EXA callbacks
[  1508.633] (II) R128(0): Initalizing 2D acceleration engine...
[  1508.633] (II) R128(0): Initializing EXA driver...
[  1508.633] (II) EXA(0): Offscreen pixmap area of 11534336 bytes
[  1508.633] (II) EXA(0): Driver registered support for the following operations:
[  1508.634] (II)         Solid
[  1508.634] (II)         Copy
[  1508.634] (II) R128(0): EXA Acceleration enabled
[  1508.634] (==) R128(0): Backing store disabled
[  1508.635] (==) R128(0): Silken mouse enabled
[  1508.635] (II) R128(0): Using hardware cursor (scanline 13105)
[  1508.648] (==) R128(0): DPMS enabled
[  1508.648] (WW) R128(0): Direct rendering disabled
[  1508.649] (==) RandR enabled
[  1508.651] (II) TDFX(1): vgaHWGetIOBase: hwp->IOBase is 0x03d0
[  1508.651] (II) TDFX(1): Changing back offset from 0x005ff000 to 0x005fe000
[  1508.651] (II) TDFX(1): Not enough video memory available for textures and depth buffer
        and/or back buffer.  Disabling DRI.  To use DRI try lower
        resolution modes and/or a smaller virtual screen size
[  1508.651] (II) TDFX(1): Cursor Offset: [0x00000000,0x00001000)
[  1508.651] (II) TDFX(1): Fifo Offset: [0x00001000, 0x00041000)
[  1508.651] (II) TDFX(1): Front Buffer Offset: [0x00041000, 0x00692800)
[  1508.651] (II) TDFX(1): (NOT USED) Texture Offset: [0x00692800, 0x006927FF)
[  1508.651] (II) TDFX(1): (NOT USED) BackOffset: [0x01000000, 0x01500000)
[  1508.652] (II) TDFX(1): (NOT USED) DepthOffset: [0xFFFFFFFF, 0x004FFFFF)
[  1508.652] (II) TDFX(1): Minimum 270, Maximum 1023 lines of offscreen memory available
[  1508.663] (==) TDFX(1): Backing store disabled
[  1508.663] (==) TDFX(1): Silken mouse enabled
[  1508.664] (==) TDFX(1): DPMS enabled
[  1508.664] (WW) TDFX(1): Direct rendering disabled
[  1508.665] (==) RandR enabled
[  1508.665] (II) Found 2 VGA devices: arbiter wrapping enabled
[  1508.734] (II) AIGLX: Screen 0 is not DRI2 capable
[  1508.734] (II) AIGLX: Screen 0 is not DRI capable
[  1509.746] (II) AIGLX: Loaded and initialized swrast
[  1509.746] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[  1509.747] (II) AIGLX: Screen 1 is not DRI2 capable
[  1509.747] (II) AIGLX: Screen 1 is not DRI capable
[  1509.752] (II) AIGLX: Loaded and initialized swrast
[  1509.752] (II) GLX: Initialized DRISWRAST GL provider for screen 1
[  1510.656] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[  1510.656] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[  1510.657] (II) LoadModule: "evdev"
[  1510.658] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[  1510.701] (II) Module evdev: vendor="X.Org Foundation"
[  1510.701]    compiled for 1.13.0, module version = 2.7.3
[  1510.701]    Module class: X.Org XInput Driver
[  1510.701]    ABI class: X.Org XInput driver, version 18.0
[  1510.701] (II) Using input driver 'evdev' for 'Power Button'
[  1510.701] (**) Power Button: always reports core events
[  1510.702] (**) evdev: Power Button: Device: "/dev/input/event2"
[  1510.702] (--) evdev: Power Button: Vendor 0 Product 0x1
[  1510.702] (--) evdev: Power Button: Found keys
[  1510.703] (II) evdev: Power Button: Configuring as keyboard
[  1510.703] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[  1510.703] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[  1510.703] (**) Option "xkb_rules" "evdev"
[  1510.703] (**) Option "xkb_model" "evdev"
[  1510.704] (**) Option "xkb_layout" "us"
[  1510.903] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[  1510.903] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[  1510.904] (II) Using input driver 'evdev' for 'Power Button'
[  1510.904] (**) Power Button: always reports core events
[  1510.904] (**) evdev: Power Button: Device: "/dev/input/event1"
[  1510.904] (--) evdev: Power Button: Vendor 0 Product 0x1
[  1510.904] (--) evdev: Power Button: Found keys
[  1510.904] (II) evdev: Power Button: Configuring as keyboard
[  1510.905] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1/event1"
[  1510.905] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[  1510.905] (**) Option "xkb_rules" "evdev"
[  1510.905] (**) Option "xkb_model" "evdev"
[  1510.905] (**) Option "xkb_layout" "us"
[  1510.910] (II) config/udev: Adding input device pac7311 (/dev/input/event4)
[  1510.910] (**) pac7311: Applying InputClass "evdev keyboard catchall"
[  1510.910] (II) Using input driver 'evdev' for 'pac7311'
[  1510.910] (**) pac7311: always reports core events
[  1510.910] (**) evdev: pac7311: Device: "/dev/input/event4"
[  1510.911] (--) evdev: pac7311: Vendor 0x93a Product 0x260e
[  1510.911] (--) evdev: pac7311: Found keys
[  1510.911] (II) evdev: pac7311: Configuring as keyboard
[  1510.911] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:07.2/usb1/1-2/input/input4/event4"
[  1510.911] (II) XINPUT: Adding extended input device "pac7311" (type: KEYBOARD, id 8)
[  1510.911] (**) Option "xkb_rules" "evdev"
[  1510.912] (**) Option "xkb_model" "evdev"
[  1510.912] (**) Option "xkb_layout" "us"
[  1510.916] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[  1510.916] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[  1510.917] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[  1510.917] (**) AT Translated Set 2 keyboard: always reports core events
[  1510.917] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[  1510.917] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[  1510.917] (--) evdev: AT Translated Set 2 keyboard: Found keys
[  1510.917] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[  1510.918] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[  1510.918] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 9)
[  1510.918] (**) Option "xkb_rules" "evdev"
[  1510.918] (**) Option "xkb_model" "evdev"
[  1510.918] (**) Option "xkb_layout" "us"
[  1510.923] (II) config/udev: Adding input device ImPS/2 Generic Wheel Mouse (/dev/input/event5)
[  1510.923] (**) ImPS/2 Generic Wheel Mouse: Applying InputClass "evdev pointer catchall"
[  1510.923] (II) Using input driver 'evdev' for 'ImPS/2 Generic Wheel Mouse'
[  1510.923] (**) ImPS/2 Generic Wheel Mouse: always reports core events
[  1510.924] (**) evdev: ImPS/2 Generic Wheel Mouse: Device: "/dev/input/event5"
[  1510.924] (--) evdev: ImPS/2 Generic Wheel Mouse: Vendor 0x2 Product 0x5
[  1510.924] (--) evdev: ImPS/2 Generic Wheel Mouse: Found 3 mouse buttons
[  1510.924] (--) evdev: ImPS/2 Generic Wheel Mouse: Found scroll wheel(s)
[  1510.924] (--) evdev: ImPS/2 Generic Wheel Mouse: Found relative axes
[  1510.924] (--) evdev: ImPS/2 Generic Wheel Mouse: Found x and y relative axes
[  1510.925] (II) evdev: ImPS/2 Generic Wheel Mouse: Configuring as mouse
[  1510.925] (II) evdev: ImPS/2 Generic Wheel Mouse: Adding scrollwheel support
[  1510.925] (**) evdev: ImPS/2 Generic Wheel Mouse: YAxisMapping: buttons 4 and 5
[  1510.925] (**) evdev: ImPS/2 Generic Wheel Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[  1510.925] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input5/event5"
[  1510.925] (II) XINPUT: Adding extended input device "ImPS/2 Generic Wheel Mouse" (type: MOUSE, id 10)
[  1510.926] (II) evdev: ImPS/2 Generic Wheel Mouse: initialized for relative axes.
[  1510.927] (**) ImPS/2 Generic Wheel Mouse: (accel) keeping acceleration scheme 1
[  1510.927] (**) ImPS/2 Generic Wheel Mouse: (accel) acceleration profile 0
[  1510.927] (**) ImPS/2 Generic Wheel Mouse: (accel) acceleration factor: 2.000
[  1510.928] (**) ImPS/2 Generic Wheel Mouse: (accel) acceleration threshold: 4
[  1510.930] (II) config/udev: Adding input device ImPS/2 Generic Wheel Mouse (/dev/input/mouse0)
[  1510.930] (II) No input driver specified, ignoring this device.
[  1510.930] (II) This device may have been added with another device file.
[  1510.932] (II) config/udev: Adding input device PC Speaker (/dev/input/event3)
[  1510.932] (II) No input driver specified, ignoring this device.
[  1510.932] (II) This device may have been added with another device file.

Any help is appreciated. smile

Last edited by e01f (2012-10-24 02:00:49)

Offline

#2 2012-10-25 05:08:10

ConnorBehan
Package Maintainer (PM)
From: Long Island NY
Registered: 2007-07-05
Posts: 1,359
Website

Re: Xorg hangs and is unkillable, but only when moving the mouse

So if you log in without moving the mouse everything is fine? And then if you move the mouse afterwards will X hang? Or will it still be fine because the mouse only needs to be still during the first minute?

Anyway, I would try using the cards individually a few times to see if this problem only happens with your dual screen setup.

6EA3 F3F3 B908 2632 A9CB E931 D53A 0445 B47A 0DAB
Great things come in tar.xz packages.

Offline

#3 2012-10-25 06:57:45

e01f
Member
Registered: 2012-10-24
Posts: 4

Re: Xorg hangs and is unkillable, but only when moving the mouse

Yep, I just kept logging in and out for like 10 Minutes and didn't move my mouse while doing so, and it did remain reponsive as if all is well. As soon as I move my mouse around a litte, it hangs after like 5 seconds. So it doesn't seem to matter when I move it, only the movement itself makes it crash. Strange isn't it?

Offline

#4 2012-10-25 07:19:12

ConnorBehan
Package Maintainer (PM)
From: Long Island NY
Registered: 2007-07-05
Posts: 1,359
Website

Re: Xorg hangs and is unkillable, but only when moving the mouse

If you move it on only the left screen does it crash? If you move it on only the right screen does it crash? Also try switching between HWCursor and SWCursor.

6EA3 F3F3 B908 2632 A9CB E931 D53A 0445 B47A 0DAB
Great things come in tar.xz packages.

Offline

#5 2012-10-25 08:00:33

e01f
Member
Registered: 2012-10-24
Posts: 4

Re: Xorg hangs and is unkillable, but only when moving the mouse

Which screen the mouse is on doesn't make a difference, as far as I can tell. I'll try yoursecond suggestion when I'm back home!

Offline

#6 2012-10-25 11:06:06

e01f
Member
Registered: 2012-10-24
Posts: 4

Re: Xorg hangs and is unkillable, but only when moving the mouse

I added

Option      "SWCursor" "true"

to my config, and it didn't seem to make a difference. Do those

[ 1800.843462] Call Trace:
[ 1800.843517]  [<c02f39af>] ? string.isra.4+0x2f/0xa0
[ 1800.843545]  [<c04d0fc3>] schedule+0x23/0x60
[ 1800.843576]  [<c039a077>] vga_get+0xe7/0x150
...

traces in dmesg tell you something? I regret that I am relatively new to Linux and therefore don't know much about the way drivers work, but I have been a C/C++/Pascal/PHP/... programmer for many years and have some expereince with assembler programming.

Thanks again for your support!

Offline

#7 2012-10-25 20:09:15

ConnorBehan
Package Maintainer (PM)
From: Long Island NY
Registered: 2007-07-05
Posts: 1,359
Website

Re: Xorg hangs and is unkillable, but only when moving the mouse

So you tried the SWCursor option for both devices? It's not simply the fact that moving the cursor requires X to update pixels is it? Using keyboard shortcuts to open and close windows are fine as long as you don't move the mouse?

Since I saw vga_arbiter mentioned in your dmesg, try removing /dev/vga_arbiter. I had to delete this on boot to fix some bugs a long time ago back when the vga arbiter was first added to the kernel.

6EA3 F3F3 B908 2632 A9CB E931 D53A 0445 B47A 0DAB
Great things come in tar.xz packages.

Offline

Pages: 1

Board footer

Powered by FluxBB