You are not logged in.
Hi everybody,
I have installed Archlinux on my laptop therefore joined the Arch community 4 days ago. After following the wiki for the installation, everything went well. I installed X and used a window manager: Fluxbox. Everything was ok since yesterday. Today, I started my system and after the login prompt (through SLim), Fluxbox took quite a while to start (about 30 seconds while it used to take less than 4-5 seconds before, maybe even less). I have installed some programs yesterday, tried to have a proper GUI, I added some eye-candies to Fluxbox like gkrellm to the slit, and flash-plugin as well (I am listing what comes into my mind right now), in other words, I have discovering Fluxbox and Archlinux. I did lots of tries by installing and unintalling some programs as well.
I don't know which logs could be relevant, but here is my Xorg.log
[ 10.687]
X.Org X Server 1.13.0
Release Date: 2012-09-05
[ 10.687] X Protocol Version 11, Revision 0
[ 10.687] Build Operating System: Linux 3.6.3-1-ARCH x86_64
[ 10.687] Current Operating System: Linux tkhosrav-archlinux 3.6.6-1-ARCH #1 SMP PREEMPT Mon Nov 5 11:57:22 CET 2012 x86_64
[ 10.687] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=3869f519-ca20-4711-a406-1212c27d2596 ro quiet
[ 10.688] Build Date: 08 November 2012 07:09:29PM
[ 10.688]
[ 10.688] Current version of pixman: 0.28.0
[ 10.688] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 10.688] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 10.688] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Nov 16 11:51:52 2012
[ 10.946] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 11.016] (==) No Layout section. Using the first Screen section.
[ 11.016] (==) No screen section available. Using defaults.
[ 11.016] (**) |-->Screen "Default Screen Section" (0)
[ 11.016] (**) | |-->Monitor "<default monitor>"
[ 11.017] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 11.017] (==) Automatically adding devices
[ 11.017] (==) Automatically enabling devices
[ 11.017] (==) Automatically adding GPU devices
[ 11.068] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 11.069] Entry deleted from font path.
[ 11.069] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 11.069] Entry deleted from font path.
[ 11.106] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 11.106] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 11.106] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 11.106] (II) Loader magic: 0x7fcc40
[ 11.106] (II) Module ABI versions:
[ 11.106] X.Org ANSI C Emulation: 0.4
[ 11.106] X.Org Video Driver: 13.1
[ 11.106] X.Org XInput driver : 18.0
[ 11.106] X.Org Server Extension : 7.0
[ 11.106] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 11.111] (--) PCI:*(0:0:2:0) 8086:2a42:1179:ffe1 rev 7, Mem @ 0xf0000000/4194304, 0xd0000000/268435456, I/O @ 0x00001800/8
[ 11.111] (--) PCI: (0:0:2:1) 8086:2a43:1179:ffe1 rev 7, Mem @ 0xf0400000/1048576
[ 11.111] (II) Open ACPI successful (/var/run/acpid.socket)
[ 11.121] Initializing built-in extension Generic Event Extension
[ 11.121] Initializing built-in extension SHAPE
[ 11.121] Initializing built-in extension MIT-SHM
[ 11.121] Initializing built-in extension XInputExtension
[ 11.121] Initializing built-in extension XTEST
[ 11.121] Initializing built-in extension BIG-REQUESTS
[ 11.121] Initializing built-in extension SYNC
[ 11.121] Initializing built-in extension XKEYBOARD
[ 11.121] Initializing built-in extension XC-MISC
[ 11.121] Initializing built-in extension SECURITY
[ 11.121] Initializing built-in extension XINERAMA
[ 11.121] Initializing built-in extension XFIXES
[ 11.121] Initializing built-in extension RENDER
[ 11.121] Initializing built-in extension RANDR
[ 11.121] Initializing built-in extension COMPOSITE
[ 11.121] Initializing built-in extension DAMAGE
[ 11.121] Initializing built-in extension MIT-SCREEN-SAVER
[ 11.121] Initializing built-in extension DOUBLE-BUFFER
[ 11.121] Initializing built-in extension RECORD
[ 11.121] Initializing built-in extension DPMS
[ 11.121] Initializing built-in extension X-Resource
[ 11.121] Initializing built-in extension XVideo
[ 11.121] Initializing built-in extension XVideo-MotionCompensation
[ 11.121] Initializing built-in extension XFree86-VidModeExtension
[ 11.121] Initializing built-in extension XFree86-DGA
[ 11.121] Initializing built-in extension XFree86-DRI
[ 11.121] Initializing built-in extension DRI2
[ 11.121] (II) LoadModule: "glx"
[ 11.169] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 11.189] (II) Module glx: vendor="X.Org Foundation"
[ 11.189] compiled for 1.13.0, module version = 1.0.0
[ 11.189] ABI class: X.Org Server Extension, version 7.0
[ 11.189] (==) AIGLX enabled
[ 11.189] Loading extension GLX
[ 11.189] (==) Matched intel as autoconfigured driver 0
[ 11.189] (==) Matched intel as autoconfigured driver 1
[ 11.189] (==) Matched vesa as autoconfigured driver 2
[ 11.189] (==) Matched modesetting as autoconfigured driver 3
[ 11.189] (==) Matched fbdev as autoconfigured driver 4
[ 11.189] (==) Assigned the driver to the xf86ConfigLayout
[ 11.189] (II) LoadModule: "intel"
[ 11.189] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 11.396] (II) Module intel: vendor="X.Org Foundation"
[ 11.396] compiled for 1.13.0, module version = 2.20.12
[ 11.396] Module class: X.Org Video Driver
[ 11.396] ABI class: X.Org Video Driver, version 13.0
[ 11.396] (II) LoadModule: "vesa"
[ 11.396] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 11.410] (II) Module vesa: vendor="X.Org Foundation"
[ 11.410] compiled for 1.13.0, module version = 2.3.2
[ 11.410] Module class: X.Org Video Driver
[ 11.410] ABI class: X.Org Video Driver, version 13.0
[ 11.410] (II) LoadModule: "modesetting"
[ 11.424] (WW) Warning, couldn't open module modesetting
[ 11.424] (II) UnloadModule: "modesetting"
[ 11.424] (II) Unloading modesetting
[ 11.424] (EE) Failed to load module "modesetting" (module does not exist, 0)
[ 11.424] (II) LoadModule: "fbdev"
[ 11.424] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 11.439] (II) Module fbdev: vendor="X.Org Foundation"
[ 11.439] compiled for 1.13.0, module version = 0.4.3
[ 11.439] Module class: X.Org Video Driver
[ 11.439] ABI class: X.Org Video Driver, version 13.0
[ 11.439] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server,
Ivybridge Server (GT2), Haswell Desktop (GT1), Haswell Desktop (GT2),
Haswell Desktop (GT2+), Haswell Mobile (GT1), Haswell Mobile (GT2),
Haswell Mobile (GT2+), Haswell Server (GT1), Haswell Server (GT2),
Haswell Server (GT2+), Haswell SDV Desktop (GT1),
Haswell SDV Desktop (GT2), Haswell SDV Desktop (GT2+),
Haswell SDV Mobile (GT1), Haswell SDV Mobile (GT2),
Haswell SDV Mobile (GT2+), Haswell SDV Server (GT1),
Haswell SDV Server (GT2), Haswell SDV Server (GT2+),
Haswell ULT Desktop (GT1), Haswell ULT Desktop (GT2),
Haswell ULT Desktop (GT2+), Haswell ULT Mobile (GT1),
Haswell ULT Mobile (GT2), Haswell ULT Mobile (GT2+),
Haswell ULT Server (GT1), Haswell ULT Server (GT2),
Haswell ULT Server (GT2+), Haswell CRW Desktop (GT1),
Haswell CRW Desktop (GT2), Haswell CRW Desktop (GT2+),
Haswell CRW Mobile (GT1), Haswell CRW Mobile (GT2),
Haswell CRW Mobile (GT2+), Haswell CRW Server (GT1),
Haswell CRW Server (GT2), Haswell CRW Server (GT2+),
ValleyView PO board
[ 11.440] (II) VESA: driver for VESA chipsets: vesa
[ 11.440] (II) FBDEV: driver for framebuffer: fbdev
[ 11.440] (++) using VT number 7
[ 11.446] (II) intel(0): using device path '/dev/dri/card0'
[ 11.446] (WW) Falling back to old probe method for vesa
[ 11.446] (WW) Falling back to old probe method for fbdev
[ 11.446] (II) Loading sub module "fbdevhw"
[ 11.446] (II) LoadModule: "fbdevhw"
[ 11.446] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 11.651] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 11.651] compiled for 1.13.0, module version = 0.0.2
[ 11.651] ABI class: X.Org Video Driver, version 13.1
[ 11.651] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 11.651] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 11.651] (==) intel(0): RGB weight 888
[ 11.651] (==) intel(0): Default visual is TrueColor
[ 11.651] (--) intel(0): Integrated Graphics Chipset: Intel(R) GM45
[ 11.651] (**) intel(0): Relaxed fencing enabled
[ 11.651] (**) intel(0): Wait on SwapBuffers? enabled
[ 11.651] (**) intel(0): Triple buffering? enabled
[ 11.651] (**) intel(0): Framebuffer tiled
[ 11.651] (**) intel(0): Pixmaps tiled
[ 11.651] (**) intel(0): 3D buffers tiled
[ 11.730] (**) intel(0): SwapBuffers wait enabled
[ 11.730] (==) intel(0): video overlay key set to 0x101fe
[ 11.730] (II) intel(0): Output LVDS1 has no monitor section
[ 11.731] (--) intel(0): found backlight control interface /sys/class/backlight/acpi_video0
[ 11.770] (II) intel(0): Output VGA1 has no monitor section
[ 11.770] (II) intel(0): Output HDMI1 has no monitor section
[ 11.770] (II) intel(0): Output DP1 has no monitor section
[ 11.810] (II) intel(0): Output DP2 has no monitor section
[ 11.810] (II) intel(0): EDID for output LVDS1
[ 11.810] (II) intel(0): Manufacturer: LGD Model: 1bc Serial#: 0
[ 11.810] (II) intel(0): Year: 2009 Week: 0
[ 11.810] (II) intel(0): EDID Version: 1.3
[ 11.810] (II) intel(0): Digital Display Input
[ 11.810] (II) intel(0): Max Image Size [cm]: horiz.: 29 vert.: 17
[ 11.810] (II) intel(0): Gamma: 2.20
[ 11.810] (II) intel(0): No DPMS capabilities specified
[ 11.810] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 11.810] (II) intel(0): First detailed timing is preferred mode
[ 11.810] (II) intel(0): redX: 0.589 redY: 0.349 greenX: 0.337 greenY: 0.548
[ 11.810] (II) intel(0): blueX: 0.155 blueY: 0.122 whiteX: 0.313 whiteY: 0.329
[ 11.810] (II) intel(0): Manufacturer's mask: 0
[ 11.810] (II) intel(0): Supported detailed timing:
[ 11.810] (II) intel(0): clock: 69.3 MHz Image Size: 294 x 166 mm
[ 11.810] (II) intel(0): h_active: 1366 h_sync: 1398 h_sync_end 1446 h_blank_end 1462 h_border: 0
[ 11.810] (II) intel(0): v_active: 768 v_sync: 771 v_sync_end 777 v_blanking: 790 v_border: 0
[ 11.810] (II) intel(0): LG Display
[ 11.810] (II) intel(0): LP133WH1-TLA1
[ 11.810] (II) intel(0): EDID (in hex):
[ 11.810] (II) intel(0): 00ffffffffffff0030e4bc0100000000
[ 11.810] (II) intel(0): 00130103801d11780ad5d59659568c27
[ 11.810] (II) intel(0): 1f505400000001010101010101010101
[ 11.810] (II) intel(0): 010101010101121b5660500016302030
[ 11.810] (II) intel(0): 360026a6100000190000000000000000
[ 11.810] (II) intel(0): 00000000000000000000000000fe004c
[ 11.810] (II) intel(0): 4720446973706c61790a2020000000fe
[ 11.810] (II) intel(0): 004c503133335748312d544c41310074
[ 11.810] (II) intel(0): EDID vendor "LGD", prod id 444
[ 11.811] (II) intel(0): Printing DDC gathered Modelines:
[ 11.811] (II) intel(0): Modeline "1366x768"x0.0 69.30 1366 1398 1446 1462 768 771 777 790 -hsync -vsync (47.4 kHz eP)
[ 11.811] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[ 11.811] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 11.811] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 11.811] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[ 11.811] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[ 11.811] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[ 11.811] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[ 11.811] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[ 11.811] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[ 11.811] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[ 11.811] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[ 11.811] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[ 11.811] (II) intel(0): Printing probed modes for output LVDS1
[ 11.811] (II) intel(0): Modeline "1366x768"x60.0 69.30 1366 1398 1446 1462 768 771 777 790 -hsync -vsync (47.4 kHz eP)
[ 11.811] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d)
[ 11.811] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
[ 11.811] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
[ 11.811] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
[ 11.850] (II) intel(0): EDID for output VGA1
[ 11.850] (II) intel(0): EDID for output HDMI1
[ 11.850] (II) intel(0): EDID for output DP1
[ 11.890] (II) intel(0): EDID for output DP2
[ 11.890] (II) intel(0): Output LVDS1 connected
[ 11.890] (II) intel(0): Output VGA1 disconnected
[ 11.890] (II) intel(0): Output HDMI1 disconnected
[ 11.890] (II) intel(0): Output DP1 disconnected
[ 11.890] (II) intel(0): Output DP2 disconnected
[ 11.890] (II) intel(0): Using exact sizes for initial modes
[ 11.890] (II) intel(0): Output LVDS1 using initial mode 1366x768
[ 11.890] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 11.890] (II) intel(0): Kernel page flipping support detected, enabling
[ 11.890] (**) intel(0): Display dimensions: (290, 170) mm
[ 11.890] (**) intel(0): DPI set to (119, 114)
[ 11.890] (II) Loading sub module "fb"
[ 11.890] (II) LoadModule: "fb"
[ 11.890] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 11.975] (II) Module fb: vendor="X.Org Foundation"
[ 11.975] compiled for 1.13.0, module version = 1.0.0
[ 11.975] ABI class: X.Org ANSI C Emulation, version 0.4
[ 11.975] (II) Loading sub module "dri2"
[ 11.975] (II) LoadModule: "dri2"
[ 11.975] (II) Module "dri2" already built-in
[ 11.975] (II) UnloadModule: "vesa"
[ 11.975] (II) Unloading vesa
[ 11.975] (II) UnloadModule: "fbdev"
[ 11.975] (II) Unloading fbdev
[ 11.975] (II) UnloadSubModule: "fbdevhw"
[ 11.975] (II) Unloading fbdevhw
[ 11.975] (==) Depth 24 pixmap format is 32 bpp
[ 11.980] (II) intel(0): [DRI2] Setup complete
[ 11.980] (II) intel(0): [DRI2] DRI driver: i965
[ 11.980] (II) intel(0): Allocated new frame buffer 1408x768 stride 5632, tiled
[ 12.019] (II) UXA(0): Driver registered support for the following operations:
[ 12.019] (II) solid
[ 12.019] (II) copy
[ 12.019] (II) composite (RENDER acceleration)
[ 12.019] (II) put_image
[ 12.019] (II) get_image
[ 12.019] (==) intel(0): Backing store disabled
[ 12.019] (==) intel(0): Silken mouse enabled
[ 12.020] (II) intel(0): Initializing HW Cursor
[ 12.020] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 12.027] (==) intel(0): DPMS enabled
[ 12.027] (==) intel(0): Intel XvMC decoder enabled
[ 12.027] (II) intel(0): Set up textured video
[ 12.027] (II) intel(0): [XvMC] xvmc_vld driver initialized.
[ 12.027] (II) intel(0): direct rendering: DRI2 Enabled
[ 12.027] (==) intel(0): hotplug detection: "enabled"
[ 12.140] (--) RandR disabled
[ 12.349] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 12.349] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 12.349] (II) AIGLX: enabled GLX_ARB_create_context
[ 12.349] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 12.349] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 12.349] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 12.349] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 12.349] (II) AIGLX: Loaded and initialized i965
[ 12.350] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 12.350] (II) intel(0): Setting screen physical size to 361 x 203
[ 13.168] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[ 13.168] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 13.168] (**) Power Button: Applying InputClass "Keyboard Defaults"
[ 13.168] (II) LoadModule: "evdev"
[ 13.168] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 13.438] (II) Module evdev: vendor="X.Org Foundation"
[ 13.438] compiled for 1.13.0, module version = 2.7.3
[ 13.438] Module class: X.Org XInput Driver
[ 13.438] ABI class: X.Org XInput driver, version 18.0
[ 13.438] (II) Using input driver 'evdev' for 'Power Button'
[ 13.438] (**) Power Button: always reports core events
[ 13.438] (**) evdev: Power Button: Device: "/dev/input/event4"
[ 13.438] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 13.438] (--) evdev: Power Button: Found keys
[ 13.439] (II) evdev: Power Button: Configuring as keyboard
[ 13.439] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event4"
[ 13.439] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 13.439] (**) Option "xkb_rules" "evdev"
[ 13.439] (**) Option "xkb_model" "evdev"
[ 13.439] (**) Option "xkb_layout" "fr"
[ 13.439] (**) Option "xkb_variant" "latin9"
[ 13.532] (II) config/udev: Adding input device Video Bus (/dev/input/event12)
[ 13.532] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 13.532] (**) Video Bus: Applying InputClass "Keyboard Defaults"
[ 13.532] (II) Using input driver 'evdev' for 'Video Bus'
[ 13.532] (**) Video Bus: always reports core events
[ 13.532] (**) evdev: Video Bus: Device: "/dev/input/event12"
[ 13.532] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 13.532] (--) evdev: Video Bus: Found keys
[ 13.532] (II) evdev: Video Bus: Configuring as keyboard
[ 13.532] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input12/event12"
[ 13.532] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 13.532] (**) Option "xkb_rules" "evdev"
[ 13.532] (**) Option "xkb_model" "evdev"
[ 13.532] (**) Option "xkb_layout" "fr"
[ 13.532] (**) Option "xkb_variant" "latin9"
[ 13.533] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 13.533] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 13.533] (**) Power Button: Applying InputClass "Keyboard Defaults"
[ 13.533] (II) Using input driver 'evdev' for 'Power Button'
[ 13.533] (**) Power Button: always reports core events
[ 13.533] (**) evdev: Power Button: Device: "/dev/input/event2"
[ 13.533] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 13.533] (--) evdev: Power Button: Found keys
[ 13.533] (II) evdev: Power Button: Configuring as keyboard
[ 13.533] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2/event2"
[ 13.533] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 13.533] (**) Option "xkb_rules" "evdev"
[ 13.533] (**) Option "xkb_model" "evdev"
[ 13.533] (**) Option "xkb_layout" "fr"
[ 13.533] (**) Option "xkb_variant" "latin9"
[ 13.534] (II) config/udev: Adding input device Lid Switch (/dev/input/event3)
[ 13.534] (II) No input driver specified, ignoring this device.
[ 13.534] (II) This device may have been added with another device file.
[ 13.534] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 13.535] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event6)
[ 13.535] (II) No input driver specified, ignoring this device.
[ 13.535] (II) This device may have been added with another device file.
[ 13.535] (II) config/udev: Adding input device HDA Intel HDMI/DP,pcm=3 (/dev/input/event7)
[ 13.535] (II) No input driver specified, ignoring this device.
[ 13.535] (II) This device may have been added with another device file.
[ 13.536] (II) config/udev: Adding input device HDA Intel Mic (/dev/input/event8)
[ 13.536] (II) No input driver specified, ignoring this device.
[ 13.536] (II) This device may have been added with another device file.
[ 13.536] (II) config/udev: Adding input device HDA Intel Headphone (/dev/input/event9)
[ 13.536] (II) No input driver specified, ignoring this device.
[ 13.536] (II) This device may have been added with another device file.
[ 13.537] (II) config/udev: Adding input device USB 2.0 Camera (/dev/input/event10)
[ 13.537] (**) USB 2.0 Camera: Applying InputClass "evdev keyboard catchall"
[ 13.537] (**) USB 2.0 Camera: Applying InputClass "Keyboard Defaults"
[ 13.537] (II) Using input driver 'evdev' for 'USB 2.0 Camera'
[ 13.537] (**) USB 2.0 Camera: always reports core events
[ 13.537] (**) evdev: USB 2.0 Camera: Device: "/dev/input/event10"
[ 13.537] (--) evdev: USB 2.0 Camera: Vendor 0x64e Product 0xd201
[ 13.537] (--) evdev: USB 2.0 Camera: Found keys
[ 13.537] (II) evdev: USB 2.0 Camera: Configuring as keyboard
[ 13.537] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.7/usb2/2-4/2-4:1.0/input/input10/event10"
[ 13.537] (II) XINPUT: Adding extended input device "USB 2.0 Camera" (type: KEYBOARD, id 9)
[ 13.537] (**) Option "xkb_rules" "evdev"
[ 13.537] (**) Option "xkb_model" "evdev"
[ 13.537] (**) Option "xkb_layout" "fr"
[ 13.537] (**) Option "xkb_variant" "latin9"
[ 13.538] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 13.538] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 13.538] (**) AT Translated Set 2 keyboard: Applying InputClass "Keyboard Defaults"
[ 13.538] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 13.538] (**) AT Translated Set 2 keyboard: always reports core events
[ 13.538] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 13.538] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 13.538] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 13.538] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 13.538] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 13.538] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 10)
[ 13.538] (**) Option "xkb_rules" "evdev"
[ 13.538] (**) Option "xkb_model" "evdev"
[ 13.538] (**) Option "xkb_layout" "fr"
[ 13.538] (**) Option "xkb_variant" "latin9"
[ 13.539] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event11)
[ 13.539] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 13.539] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 13.539] (II) LoadModule: "synaptics"
[ 13.539] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 13.559] (II) Module synaptics: vendor="X.Org Foundation"
[ 13.559] compiled for 1.13.0, module version = 1.6.2
[ 13.559] Module class: X.Org XInput Driver
[ 13.559] ABI class: X.Org XInput driver, version 18.0
[ 13.559] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[ 13.559] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 13.559] (**) Option "Device" "/dev/input/event11"
[ 13.560] (II) synaptics: SynPS/2 Synaptics TouchPad: ignoring touch events for semi-multitouch device
[ 13.560] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5686
[ 13.560] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4786
[ 13.560] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 13.560] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[ 13.560] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
[ 13.560] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[ 13.560] (**) Option "TapButton1" "1"
[ 13.560] (**) Option "TapButton2" "2"
[ 13.560] (**) Option "TapButton3" "3"
[ 13.560] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 13.560] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 13.560] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio4/input/input11/event11"
[ 13.560] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 11)
[ 13.560] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 13.560] (**) synaptics: SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75
[ 13.560] (**) synaptics: SynPS/2 Synaptics TouchPad: AccelFactor is now 0.037
[ 13.561] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 13.561] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[ 13.561] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 13.561] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 13.561] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 13.561] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[ 13.561] (II) No input driver specified, ignoring this device.
[ 13.561] (II) This device may have been added with another device file.
[ 13.562] (II) config/udev: Adding input device PC Speaker (/dev/input/event1)
[ 13.562] (II) No input driver specified, ignoring this device.
[ 13.562] (II) This device may have been added with another device file.
[ 13.563] (II) config/udev: Adding input device Toshiba input device (/dev/input/event5)
[ 13.563] (**) Toshiba input device: Applying InputClass "evdev keyboard catchall"
[ 13.563] (**) Toshiba input device: Applying InputClass "Keyboard Defaults"
[ 13.563] (II) Using input driver 'evdev' for 'Toshiba input device'
[ 13.563] (**) Toshiba input device: always reports core events
[ 13.563] (**) evdev: Toshiba input device: Device: "/dev/input/event5"
[ 13.563] (--) evdev: Toshiba input device: Vendor 0 Product 0
[ 13.563] (--) evdev: Toshiba input device: Found keys
[ 13.563] (II) evdev: Toshiba input device: Configuring as keyboard
[ 13.563] (**) Option "config_info" "udev:/sys/devices/virtual/input/input5/event5"
[ 13.563] (II) XINPUT: Adding extended input device "Toshiba input device" (type: KEYBOARD, id 12)
[ 13.563] (**) Option "xkb_rules" "evdev"
[ 13.563] (**) Option "xkb_model" "evdev"
[ 13.563] (**) Option "xkb_layout" "fr"
[ 13.563] (**) Option "xkb_variant" "latin9"Thank you for your help.
Offline
While I did not read all of it, everything in that log happened in under 3 seconds - so the problem will not likely be found there.
Can you take slim out of the equation - at least temporarily - and just use `xinit` and see if it works better?
"UNIX is simple and coherent" - Dennis Ritchie; "GNU's Not Unix" - Richard Stallman
Offline
Done, the problem still remains the same.
Don't know if it might help, but I have enable the logs when Fluxbox starts (in the file .fluxbox/startup). And sorry, but it's in French...
Journal: /home/tony/.fluxbox/log
Version de Fluxbox: 1.3.2
Compilé: Oct 30 2011 02:14:07
Compilateur: GCC
Version du compilateur: 4.6.1 20110819 (prerelease)
Défauts:
menu: /usr/share/fluxbox/menu
style: /usr/share/fluxbox/styles/bloe
keys: /usr/share/fluxbox/keys
init: /usr/share/fluxbox/init
nls: /usr/share/fluxbox/nls
Options compilées (- => désactivé):
BIDI
-DEBUG
EWMH
IMLIB2
NLS
REMEMBER
RENDER
SHAPE
SLIT
TOOLBAR
XFT
XINERAMA
XMB
XPMOffline
I have started the X server without Fluxbox, and it seems that the problem is not related with the latter since the time needed is the same. So I guess that the problem comes from X.
I've done a simple startx startup and here is the output
X.Org X Server 1.13.0
Release Date: 2012-09-05
X Protocol Version 11, Revision 0
Build Operating System: Linux 3.6.3-1-ARCH x86_64
Current Operating System: Linux tkhosrav-archlinux 3.6.6-1-ARCH #1 SMP PREEMPT Mon Nov 5 11:57:22 CET 2012 x86_64
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=3869f519-ca20-4711-a406-1212c27d2596 ro quiet
Build Date: 08 November 2012 07:09:29PM
Current version of pixman: 0.28.0
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Fri Nov 16 14:52:32 2012
(==) Using config directory: "/etc/X11/xorg.conf.d"
Initializing built-in extension Generic Event Extension
Initializing built-in extension SHAPE
Initializing built-in extension MIT-SHM
Initializing built-in extension XInputExtension
Initializing built-in extension XTEST
Initializing built-in extension BIG-REQUESTS
Initializing built-in extension SYNC
Initializing built-in extension XKEYBOARD
Initializing built-in extension XC-MISC
Initializing built-in extension SECURITY
Initializing built-in extension XINERAMA
Initializing built-in extension XFIXES
Initializing built-in extension RENDER
Initializing built-in extension RANDR
Initializing built-in extension COMPOSITE
Initializing built-in extension DAMAGE
Initializing built-in extension MIT-SCREEN-SAVER
Initializing built-in extension DOUBLE-BUFFER
Initializing built-in extension RECORD
Initializing built-in extension DPMS
Initializing built-in extension X-Resource
Initializing built-in extension XVideo
Initializing built-in extension XVideo-MotionCompensation
Initializing built-in extension XFree86-VidModeExtension
Initializing built-in extension XFree86-DGA
Initializing built-in extension XFree86-DRI
Initializing built-in extension DRI2
Loading extension GLX
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning: Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
> Ignoring extra symbols
Errors from xkbcomp are not fatal to the X serverMaybe one of the modules loaded at startup is messing up with X
Offline
Shot in the Dark here but would this be relevant ?
Offline
Unfortunately it's not. I got rid off those warning messages, but still 30 seconds to startup.
Offline
Hi and welcome to Arch!
[ 11.424] (EE) Failed to load module "modesetting" (module does not exist, 0)
This looks funny to me.
Can you please post the following:
$ cat /etc/X11/xorg.conf.d/10-monitor.conf
$ lspci | grep VGABonne chance!
Offline