You are not logged in.

#1 2005-10-24 21:32:32

atze
Member
From: Netherlands (Leiden)
Registered: 2005-10-22
Posts: 76
Website

[Kernel] USB and network trouble

Hey all, i have some trouble getting my system fully running.
I have a built in 3com network card, it uses the 3c59x module in the kernel (got it build into the kernel). I also have a usb cd writer. When i start writing my network fails after sometime. I came from vectorlinux to arch. In VL it worked without a prob. Here check my dmesg output. The most interesting is at the end.

chitecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: Intel Pentium III (Coppermine) stepping 06
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
ACPI: setting ELCR to 0200 (from 0808)
checking if image is initramfs... it is
Freeing initrd memory: 567k freed
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xfed9b, last bus=21
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20041105
    ACPI-0169: *** Error: No object was returned from [_SB_.LNKA._STA] (Node d3fdef00), AE_NOT_EXIST
    ACPI-0169: *** Error: No object was returned from [_SB_.LNKB._STA] (Node d3fdee00), AE_NOT_EXIST
    ACPI-0169: *** Error: No object was returned from [_SB_.LNKC._STA] (Node d3fded00), AE_NOT_EXIST
    ACPI-0169: *** Error: No object was returned from [_SB_.LNKD._STA] (Node d3fdec00), AE_NOT_EXIST
    ACPI-0169: *** Error: No object was returned from [_SB_.PCI0.FNC0.FDD_._STA] (Node c12f75a0), AE_NOT_EXIST
    ACPI-0169: *** Error: No object was returned from [_SB_.PCI0.FNC0.COM_._STA] (Node c12f7460), AE_NOT_EXIST
    ACPI-0169: *** Error: No object was returned from [_SB_.PCI0.FNC0.PRT_._STA] (Node c12f72e0), AE_NOT_EXIST
    ACPI-0169: *** Error: No object was returned from [_SB_.PCI0.FNC0.PRT1._STA] (Node c12f7200), AE_NOT_EXIST
    ACPI-0169: *** Error: No object was returned from [_SB_.PCI0.FNC0.PCC0._STA] (Node c12f7fe0), AE_NOT_EXIST
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
    ACPI-0169: *** Error: No object was returned from [_SB_.LNKE._PRS] (Node c12fc780), AE_NOT_EXIST
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
ACPI: PCI Interrupt Routing Table [_SB_.PCI0._PRT]
ACPI: Power Resource [PIHD] (on)
ACPI: Power Resource [PMHD] (off)
ACPI: Power Resource [PDOC] (off)
ACPI: PCI Interrupt Routing Table [_SB_.PCI0.PCI1._PRT]
ACPI: Power Resource [PFAN] (off)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
    ACPI-0169: *** Error: No object was returned from [_SB_.MEM_._CRS] (Node c12fc6a0), AE_NOT_EXIST
pnp: PnPACPI: METHOD_NAME__CRS failure for PNP0c01
PCI: setting IRQ 13 as level-triggered
pnp: PnP ACPI: found 9 devices
SCSI subsystem initialized
Linux Kernel Card Services
  options:  [pci] [cardbus] [pm]
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
** PCI interrupts are no longer routed automatically.  If this
** causes a device to stop working, it is probably because the
** driver failed to call pci_enable_device().  As a temporary
** workaround, the "pci=routeirq" argument restores the old
** behavior.  If this argument makes the device work again,
** please email the output of "lspci" to bjorn.helgaas@hp.com
** so I can fix the driver.
    ACPI-0169: *** Error: No object was returned from [_SB_.MEM_._CRS] (Node c12fc6a0), AE_NOT_EXIST
apm: BIOS version 1.2 Flags 0x02 (Driver version 1.16ac)
apm: overridden by ACPI.
devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
Initializing Cryptographic API
Limiting direct PCI/PCI transfers.
cpci_hotplug: CompactPCI Hot Plug Core version: 0.2
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.4
acpiphp_glue: can't get bus number, assuming 0
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected an Intel 440BX Chipset.
agpgart: Maximum main memory to use for agp memory: 262M
agpgart: AGP aperture is 256M @ 0xd0000000
vesafb: framebuffer at 0xf0000000, mapped to 0xd4900000, using 6144k, total 8192k
vesafb: mode is 1024x768x32, linelength=4096, pages=1
vesafb: protected mode interface info at c000:8751
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
ACPI: AC Adapter [ADP1] (on-line)
ACPI: Battery Slot [BAT1] (battery present)
ACPI: Power Button (FF) [PWRF]
ACPI: Lid Switch [LID]
ACPI: Fan [FAN] (off)
ACPI: Video Device [VGA] (multi-head: yes  rom: yes  post: no)
ACPI: Processor [CPU0] (supports C1 C2)
ACPI: Thermal Zone [THRM] (66 C)
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
elevator: using anticipatory as default io scheduler
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
loop: loaded (max 8 devices)
ACPI: PCI interrupt 0000:00:0f.0[A]: no GSI - using IRQ 11
3c59x: Donald Becker and others. www.scyld.com/network/vortex.html
0000:00:0f.0: 3Com PCI 3c905C Tornado at 0xfb00. Vers LK1.1.19
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PIIX4: IDE controller at PCI slot 0000:00:05.1
PIIX4: chipset revision 1
PIIX4: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0xfff0-0xfff7, BIOS settings: hda:DMA, hdb:pio
    ide1: BM-DMA at 0xfff8-0xffff, BIOS settings: hdc:DMA, hdd:pio
Probing IDE interface ide0...
hda: TOSHIBA MK1516GAP, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: TOSHIBA DVD-ROM SD-C2402, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
Probing IDE interface ide2...
ide2: Wait for ready failed before probe !
Probing IDE interface ide3...
ide3: Wait for ready failed before probe !
Probing IDE interface ide4...
ide4: Wait for ready failed before probe !
Probing IDE interface ide5...
ide5: Wait for ready failed before probe !
hda: max request size: 128KiB
hda: 23579136 sectors (12072 MB), CHS=23392/16/63, UDMA(33)
hda: cache flushes not supported
 /dev/ide/host0/bus0/target0/lun0: p1 p2 < p5 p6 p7 p8 >
hdc: ATAPI 24X DVD-ROM drive, 128kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
PCI: Enabling device 0000:00:0b.0 (0000 -> 0002)
ACPI: PCI interrupt 0000:00:0b.0[A]: no GSI
Yenta: CardBus bridge found at 0000:00:0b.0 [1179:0001]
Yenta: ISA IRQ mask 0x0cb8, PCI irq 0
Socket status: 30000007
PCI: Enabling device 0000:00:0b.1 (0000 -> 0002)
ACPI: PCI interrupt 0000:00:0b.1[b]: no GSI
Yenta: CardBus bridge found at 0000:00:0b.1 [1179:0001]
Yenta: ISA IRQ mask 0x0cb8, PCI irq 0
Socket status: 30000007
ohci_hcd: 2004 Nov 08 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
USB Universal Host Controller Interface driver v2.2
ACPI: PCI interrupt 0000:00:05.2[D]: no GSI - using IRQ 11
uhci_hcd 0000:00:05.2: Intel Corp. 82371AB/EB/MB PIIX4 USB
uhci_hcd 0000:00:05.2: irq 11, io base 0xff80
uhci_hcd 0000:00:05.2: new USB bus registered, assigned bus number 1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
sl811: driver sl811-hcd, 06 Dec 2004
usb 1-2: new full speed USB device using uhci_hcd and address 2
usbaudio: device 2 audiocontrol interface 0 has 1 input and 0 output AudioStreaming interfaces
usbaudio: valid input sample rate 8000
usbaudio: valid input sample rate 48000
usbaudio: valid input sample rate 44100
usbaudio: valid input sample rate 22050
usbaudio: valid input sample rate 11025
usbaudio: device 2 interface 1 altsetting 1: format 0x00000010 sratelo 8000 sratehi 48000 attributes 0x01
usbaudio: valid input sample rate 8000
usbaudio: valid input sample rate 48000
usbaudio: valid input sample rate 44100
usbaudio: valid input sample rate 22050
usbaudio: valid input sample rate 11025
usbaudio: device 2 interface 1 altsetting 2: format 0x80000010 sratelo 8000 sratehi 48000 attributes 0x01
usbaudio: registered dsp 14,3
usbaudio: constructing mixer for Terminal 2 type 0x0101
usbaudio: registered mixer 14,0
usb_audio_parsecontrol: usb_audio_state at d3cb6560
usbcore: registered new driver audio
drivers/usb/class/audio.c: v1.0.0:USB Audio Class driver
Initializing USB Mass Storage driver...
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard on isa0060/serio0
input: ImExPS/2 Generic Explorer Mouse on isa0060/serio1
Advanced Linux Sound Architecture Driver Version 1.0.6 (Sun Aug 15 07:17:53 2004 UTC).
ACPI: PCI interrupt 0000:00:0c.0[A]: no GSI - using IRQ 11
es1968: clocking to 48000
unable to register OSS PCM device 0:0
unable to register OSS mixer device 0:0
ALSA device list:
  #0: ESS ES1978 (Maestro 2E) at 0xfc00, irq 11
NET: Registered protocol family 2
IP: routing cache hash table of 2048 buckets, 16Kbytes
TCP: Hash tables configured (established 32768 bind 65536)
NET: Registered protocol family 1
NET: Registered protocol family 10
IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
ACPI wakeup devices: 
 USB VIY0 VIY1 MODM  LAN LAN2  LID 
ACPI: (supports S0 S1 S3 S4 S4bios S5)
ReiserFS: hda1: found reiserfs format "3.6" with standard journal
ReiserFS: hda1: using ordered data mode
ReiserFS: hda1: journal params: device hda1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: hda1: checking transaction log (hda1)
ReiserFS: hda1: Using r5 hash to sort names
VFS: Mounted root (reiserfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 192k freed
Adding 40120k swap on /dev/discs/disc0/part5.  Priority:-1 extents:1
Adding 128480k swap on /dev/discs/disc0/part7.  Priority:-2 extents:1
Adding 128480k swap on /dev/discs/disc0/part8.  Priority:-3 extents:1
Real Time Clock Driver v1.12
drivers/usb/serial/usb-serial.c: USB Serial support registered for Generic
usbcore: registered new driver usbserial_generic
usbcore: registered new driver usbserial
drivers/usb/serial/usb-serial.c: USB Serial Driver core v2.0
Disabled Privacy Extensions on device c04cd0e0(lo)
eth0: no IPv6 routers present
ISO 9660 Extensions: Microsoft Joliet Level 3
ISOFS: changing to secondary root
usb 1-1: new full speed USB device using uhci_hcd and address 3
scsi0 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 3
usb-storage: waiting for device to settle before scanning
  Vendor: LITE-ON   Model: LTR-48246K        Rev: SKS7
  Type:   CD-ROM                             ANSI SCSI revision: 00
sr0: scsi3-mmc drive: 207x/48x writer cd/rw xa/form2 cdda tray
Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0
Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0,  type 5
usb-storage: device scan complete
cdrom: This disc doesn't have any tracks I recognize!
cdrom: This disc doesn't have any tracks I recognize!
scsi: unknown opcode 0x01
ISO 9660 Extensions: Microsoft Joliet Level 3
ISOFS: changing to secondary root
NETDEV WATCHDOG: eth0: transmit timed out
eth0: transmit timed out, tx_status 00 status e601.
  diagnostics: net 0cf6 media 8880 dma 0000003a fifo 8000
eth0: Interrupt posted but not delivered -- IRQ blocked by another device?
  Flags; bus-master 1, dirty 1328(0) current 1328(0)
  Transmit list 00000000 vs. d3c97200.
  0: @d3c97200  length 8000049c status 0c01049c
  1: @d3c972a0  length 8000049c status 0c01049c
  2: @d3c97340  length 8000004d status 0c01004d
  3: @d3c973e0  length 8000004d status 0c01004d
  4: @d3c97480  length 80000049 status 0c010049
  5: @d3c97520  length 80000049 status 0c010049
  6: @d3c975c0  length 8000002a status 0001002a
  7: @d3c97660  length 80000049 status 0c010049
  8: @d3c97700  length 8000002a status 0001002a
  9: @d3c977a0  length 8000002a status 0001002a
  10: @d3c97840  length 8000004d status 0c01004d
  11: @d3c978e0  length 8000002a status 0001002a
  12: @d3c97980  length 8000002a status 0001002a
  13: @d3c97a20  length 8000002a status 0001002a
  14: @d3c97ac0  length 8000002a status 8001002a
  15: @d3c97b60  length 8000002a status 8001002a
eth0: Resetting the Tx ring pointer.
NETDEV WATCHDOG: eth0: transmit timed out
eth0: transmit timed out, tx_status 00 status e601.
  diagnostics: net 0cf6 media 8880 dma 0000003a fifo 0000
eth0: Interrupt posted but not delivered -- IRQ blocked by another device?
  Flags; bus-master 1, dirty 1344(0) current 1344(0)
  Transmit list 00000000 vs. d3c97200.
  0: @d3c97200  length 8000002a status 0001002a
  1: @d3c972a0  length 8000002a status 0001002a
  2: @d3c97340  length 8000002a status 0001002a
  3: @d3c973e0  length 8000002a status 0001002a
  4: @d3c97480  length 80000036 status 00010036
  5: @d3c97520  length 80000036 status 00010036
  6: @d3c975c0  length 80000036 status 00010036
  7: @d3c97660  length 80000036 status 00010036
  8: @d3c97700  length 80000036 status 00010036
  9: @d3c977a0  length 80000036 status 00010036
  10: @d3c97840  length 80000036 status 00010036
  11: @d3c978e0  length 80000047 status 0c010047
  12: @d3c97980  length 80000082 status 00010082
  13: @d3c97a20  length 8000004e status 0001004e
  14: @d3c97ac0  length 8000004e status 8001004e
  15: @d3c97b60  length 8000004e status 8001004e
eth0: Resetting the Tx ring pointer.
NETDEV WATCHDOG: eth0: transmit timed out
eth0: transmit timed out, tx_status 00 status e601.
  diagnostics: net 0cf6 media 8880 dma 0000003a fifo 0000
eth0: Interrupt posted but not delivered -- IRQ blocked by another device?
  Flags; bus-master 1, dirty 1360(0) current 1360(0)
  Transmit list 00000000 vs. d3c97200.
  0: @d3c97200  length 80000080 status 00010080
  1: @d3c972a0  length 8000004a status 0001004a
  2: @d3c97340  length 80000055 status 0c010055
  3: @d3c973e0  length 8000004a status 0001004a
  4: @d3c97480  length 8000002a status 0001002a
  5: @d3c97520  length 8000002a status 0001002a
  6: @d3c975c0  length 8000002a status 0001002a
  7: @d3c97660  length 80000055 status 0c010055
  8: @d3c97700  length 8000002a status 0001002a
  9: @d3c977a0  length 8000006c status 0001006c
  10: @d3c97840  length 80000036 status 00010036
  11: @d3c978e0  length 80000036 status 00010036
  12: @d3c97980  length 80000049 status 0c010049
  13: @d3c97a20  length 80000051 status 0c010051
  14: @d3c97ac0  length 80000049 status 8c010049
  15: @d3c97b60  length 80000051 status 8c010051
eth0: Resetting the Tx ring pointer.
NETDEV WATCHDOG: eth0: transmit timed out
eth0: transmit timed out, tx_status 00 status e601.
  diagnostics: net 0cf6 media 8880 dma 0000003a fifo 0000
eth0: Interrupt posted but not delivered -- IRQ blocked by another device?
  Flags; bus-master 1, dirty 1376(0) current 1376(0)
  Transmit list 00000000 vs. d3c97200.
  0: @d3c97200  length 80000049 status 0c010049
  1: @d3c972a0  length 80000051 status 0c010051
  2: @d3c97340  length 800000ae status 000100ae
  3: @d3c973e0  length 800000ae status 000100ae
  4: @d3c97480  length 80000042 status 00010042
  5: @d3c97520  length 8000006b status 0001006b
  6: @d3c975c0  length 8000006b status 0001006b
  7: @d3c97660  length 80000080 status 00010080
  8: @d3c97700  length 8000004e status 0001004e
  9: @d3c977a0  length 80000080 status 00010080
  10: @d3c97840  length 8000004e status 0001004e
  11: @d3c978e0  length 80000080 status 00010080
  12: @d3c97980  length 80000080 status 00010080
  13: @d3c97a20  length 8000006b status 0001006b
  14: @d3c97ac0  length 80000051 status 8c010051
  15: @d3c97b60  length 8000004a status 8001004a
eth0: Resetting the Tx ring pointer.
eth0: no IPv6 routers present

When my network is down, the onlything to restore is is rebooting my computer. Restarting the network daemon does not work. Currently i don't have hotplug running, but with hotplug i encounter the same problem.

I hope anybody can help me.

Greetinx Atze

Offline

#2 2005-10-29 22:39:13

Lone_Wolf
Member
From: Netherlands, Europe
Registered: 2005-10-04
Posts: 4,668

Re: [Kernel] USB and network trouble

It looks like the problem is with ACPI or you have a hardware IRQ conflict..

check for a bios update for your Motherboard and check the bios settings.

It might also help if you moved network card to another pci-slot.


Booting with apg Openrc, NOT systemd.
Automounting : not needed, i prefer pmount
Aur helpers : makepkg + my own local repo === rarely need them

Offline

Board footer

Powered by FluxBB