You are not logged in.
When I go full-screen on YouTube, the video tears, freezes every few seconds, and drops frames.
This isn't due to hardware constraints, as I have an i5 2500K running at 3.4 GHz x 4 and a Radeon HD 6950 running at 800/1250 Mhz.
Suspecting that it was due to GPU acceleration, I attempted to turn the feature off. I've unchecked the "Enable hardware acceleration" box in the "Settings" menu of Flash, and added to /etc/adobe/mms.cfg:
EnableLinuxHWVideoDecode=0However, even after a reboot the problem persists in both Chromium and Firefox. I'm running:
xorg-server 1.13.3-1
fglrx 13.1-2
Chromium 26.0.1410.63
flashplugin 11.2.202.280-1
firefox 20.0.1-2
dwm 6.0I've observed that when watching a YouTube in full-screen, that my GPU load is 100% according to:
aticonfig --od-getclocksThis problem does not occur when running xf86-video-ati. However, I use opencl-catalyst, so the open source drivers are not an option for me.
Last edited by Slax (2013-04-14 20:40:30)
Offline
Try putting
OverrideGPUValidation = 1in your /etc/adobe/mms.cfg
17:44 < fryguy> TheBilgeRat: they don't tell retards in special ed classes to rtfm either.
Offline
What castlevaniahellraiser said. And then tick "Enable hardware acceleration" again. You won't get much acceleration with catalyst anyway, only fullscreen scaling. Anything more requires VDPAU, which catalyst does not provide.
Offline
I'm trying to find a way to disable GPU acceleration.
I'm running a compute-intensive OpenCL application, and Flash is killing the performance.
Offline
There's nothing more to disable than unticking that option. Are you sure it's specifically flash causing the usage, and not the general burden of displaying a fast-moving picture? Or maybe it's the browser's layers acceleration or whatever each specific browser calls it.
Offline
The OpenCL application runs at 100% speed while I play an 8Mbps mp4 in VLC.
When a YouTube video is playing in full-screen, the OpenCL application drops to 5% of its original performance.
Also, the YouTube video periodically freezes, and due to tearing it is almost unwatchable.
This does not happen when using the xf86-video-ati drivers.
Last edited by Slax (2013-04-14 21:01:10)
Offline