You are not logged in.

#1 2013-04-18 07:27:18

yotama9
Member
Registered: 2010-10-06
Posts: 70

Gnome-session failed to start after upgrade to 3.8 [solved]

Hi dear arch users.

I have decided to upgrade my gnome version to 3.6 after reading it is fairly save to use. Following what I read here, the easiest method was to remove the 3.6 version and install the 3.8 version from the testing repositories. I did so, using

pacman -Rc gnome

and installed gnome3.8 using

 pacman -S gnome 

.
When I tried to launch gdm (from root accounf) I got this error that claimed I forgot to launch g_type_init(). Placing exec gnome-session in ~/.xinitrc didn't help. The system start X and promptly close it. The output on screen stated something about faild-gnomesession and SIGTERM. I looked at (attached) the X log and didn't see any suspect. To my untrained eye, the only thing that seemed a little funky is the line evdev: ThinkPad Extra Buttons: Close which appear both at [231.72] and [231.73] right before X starts to shut down. Finally, I've installed xfce4 which work fine.

How can I laucnh

[    60.034] 
X.Org X Server 1.14.0
Release Date: 2013-03-05
[    60.034] X Protocol Version 11, Revision 0
[    60.035] Build Operating System: Linux 3.8.2-1-ARCH i686 
[    60.035] Current Operating System: Linux Standing 3.8.4-1-ARCH #1 SMP PREEMPT Thu Mar 21 07:58:46 CET 2013 i686
[    60.035] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=ca2ce9d9-7101-48c9-a6b0-fa949ad217ea ro quiet
[    60.035] Build Date: 09 March 2013  11:46:22AM
[    60.035]  
[    60.035] Current version of pixman: 0.28.2
[    60.035] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[    60.035] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    60.035] (==) Log file: "/var/log/Xorg.1.log", Time: Tue Apr  2 06:09:06 2013
[    60.035] (==) Using config directory: "/etc/X11/xorg.conf.d"
[    60.035] (==) No Layout section.  Using the first Screen section.
[    60.035] (==) No screen section available. Using defaults.
[    60.035] (**) |-->Screen "Default Screen Section" (0)
[    60.035] (**) |   |-->Monitor "<default monitor>"
[    60.035] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[    60.036] (==) Automatically adding devices
[    60.036] (==) Automatically enabling devices
[    60.036] (==) Automatically adding GPU devices
[    60.036] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[    60.036] 	Entry deleted from font path.
[    60.036] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[    60.036] 	Entry deleted from font path.
[    60.036] 	(Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[    60.036] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[    60.036] 	Entry deleted from font path.
[    60.036] 	(Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[    60.036] (==) FontPath set to:
	/usr/share/fonts/misc/,
	/usr/share/fonts/TTF/,
	/usr/share/fonts/Type1/
[    60.036] (==) ModulePath set to "/usr/lib/xorg/modules"
[    60.036] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[    60.036] (II) Loader magic: 0x825b620
[    60.036] (II) Module ABI versions:
[    60.036] 	X.Org ANSI C Emulation: 0.4
[    60.036] 	X.Org Video Driver: 14.1
[    60.036] 	X.Org XInput driver : 19.1
[    60.036] 	X.Org Server Extension : 7.0
[    60.036] (II) config/udev: Adding drm device (/dev/dri/card0)
[    60.039] (--) PCI:*(0:0:2:0) 8086:0046:17aa:21c5 rev 2, Mem @ 0xf0000000/4194304, 0xd0000000/268435456, I/O @ 0x00001800/8
[    60.039] Initializing built-in extension Generic Event Extension
[    60.039] Initializing built-in extension SHAPE
[    60.039] Initializing built-in extension MIT-SHM
[    60.039] Initializing built-in extension XInputExtension
[    60.039] Initializing built-in extension XTEST
[    60.039] Initializing built-in extension BIG-REQUESTS
[    60.039] Initializing built-in extension SYNC
[    60.039] Initializing built-in extension XKEYBOARD
[    60.039] Initializing built-in extension XC-MISC
[    60.039] Initializing built-in extension SECURITY
[    60.039] Initializing built-in extension XINERAMA
[    60.039] Initializing built-in extension XFIXES
[    60.039] Initializing built-in extension RENDER
[    60.039] Initializing built-in extension RANDR
[    60.039] Initializing built-in extension COMPOSITE
[    60.039] Initializing built-in extension DAMAGE
[    60.039] Initializing built-in extension MIT-SCREEN-SAVER
[    60.039] Initializing built-in extension DOUBLE-BUFFER
[    60.039] Initializing built-in extension RECORD
[    60.039] Initializing built-in extension DPMS
[    60.039] Initializing built-in extension X-Resource
[    60.039] Initializing built-in extension XVideo
[    60.039] Initializing built-in extension XVideo-MotionCompensation
[    60.039] Initializing built-in extension XFree86-VidModeExtension
[    60.039] Initializing built-in extension XFree86-DGA
[    60.039] Initializing built-in extension XFree86-DRI
[    60.039] Initializing built-in extension DRI2
[    60.039] (II) LoadModule: "glx"
[    60.039] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    60.039] (II) Module glx: vendor="X.Org Foundation"
[    60.040] 	compiled for 1.14.0, module version = 1.0.0
[    60.040] 	ABI class: X.Org Server Extension, version 7.0
[    60.040] (==) AIGLX enabled
[    60.040] Loading extension GLX
[    60.040] (==) Matched intel as autoconfigured driver 0
[    60.040] (==) Matched intel as autoconfigured driver 1
[    60.040] (==) Matched vesa as autoconfigured driver 2
[    60.040] (==) Matched modesetting as autoconfigured driver 3
[    60.040] (==) Matched fbdev as autoconfigured driver 4
[    60.040] (==) Assigned the driver to the xf86ConfigLayout
[    60.040] (II) LoadModule: "intel"
[    60.040] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[    60.040] (II) Module intel: vendor="X.Org Foundation"
[    60.040] 	compiled for 1.14.0, module version = 2.21.5
[    60.040] 	Module class: X.Org Video Driver
[    60.040] 	ABI class: X.Org Video Driver, version 14.1
[    60.040] (II) LoadModule: "vesa"
[    60.041] (WW) Warning, couldn't open module vesa
[    60.041] (II) UnloadModule: "vesa"
[    60.041] (II) Unloading vesa
[    60.041] (EE) Failed to load module "vesa" (module does not exist, 0)
[    60.041] (II) LoadModule: "modesetting"
[    60.041] (WW) Warning, couldn't open module modesetting
[    60.041] (II) UnloadModule: "modesetting"
[    60.041] (II) Unloading modesetting
[    60.041] (EE) Failed to load module "modesetting" (module does not exist, 0)
[    60.041] (II) LoadModule: "fbdev"
[    60.041] (WW) Warning, couldn't open module fbdev
[    60.041] (II) UnloadModule: "fbdev"
[    60.041] (II) Unloading fbdev
[    60.041] (EE) Failed to load module "fbdev" (module does not exist, 0)
[    60.041] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
	i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
	E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
	965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
	4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
	Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
	Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
	Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
	Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
	Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server,
	Ivybridge Server (GT2), Haswell Desktop (GT1), Haswell Desktop (GT2),
	Haswell Desktop (GT2+), Haswell Mobile (GT1), Haswell Mobile (GT2),
	Haswell Mobile (GT2+), Haswell Server (GT1), Haswell Server (GT2),
	Haswell Server (GT2+), Haswell SDV Desktop (GT1),
	Haswell SDV Desktop (GT2), Haswell SDV Desktop (GT2+),
	Haswell SDV Mobile (GT1), Haswell SDV Mobile (GT2),
	Haswell SDV Mobile (GT2+), Haswell SDV Server (GT1),
	Haswell SDV Server (GT2), Haswell SDV Server (GT2+),
	Haswell ULT Desktop (GT1), Haswell ULT Desktop (GT2),
	Haswell ULT Desktop (GT2+), Haswell ULT Mobile (GT1),
	Haswell ULT Mobile (GT2), Haswell ULT Mobile (GT2+),
	Haswell ULT Server (GT1), Haswell ULT Server (GT2),
	Haswell ULT Server (GT2+), Haswell CRW Desktop (GT1),
	Haswell CRW Desktop (GT2), Haswell CRW Desktop (GT2+),
	Haswell CRW Mobile (GT1), Haswell CRW Mobile (GT2),
	Haswell CRW Mobile (GT2+), Haswell CRW Server (GT1),
	Haswell CRW Server (GT2), Haswell CRW Server (GT2+),
	ValleyView PO board
[    60.043] (++) using VT number 1

[    60.044] (II) intel(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[    60.044] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[    60.044] (==) intel(0): RGB weight 888
[    60.044] (==) intel(0): Default visual is TrueColor
[    60.044] (--) intel(0): Integrated Graphics Chipset: Intel(R) Arrandale
[    60.044] (**) intel(0): Relaxed fencing enabled
[    60.044] (**) intel(0): Wait on SwapBuffers? enabled
[    60.044] (**) intel(0): Triple buffering? enabled
[    60.044] (**) intel(0): Framebuffer tiled
[    60.044] (**) intel(0): Pixmaps tiled
[    60.044] (**) intel(0): 3D buffers tiled
[    60.044] (**) intel(0): SwapBuffers wait enabled
[    60.044] (==) intel(0): video overlay key set to 0x101fe
[    60.044] (II) intel(0): Output LVDS1 has no monitor section
[    60.044] (--) intel(0): found backlight control interface /sys/class/backlight/acpi_video0
[    60.057] (II) intel(0): Output VGA1 has no monitor section
[    60.070] (II) intel(0): Output HDMI1 has no monitor section
[    60.110] (II) intel(0): Output DP1 has no monitor section
[    60.110] (II) intel(0): EDID for output LVDS1
[    60.110] (II) intel(0): Manufacturer: LEN  Model: 4090  Serial#: 0
[    60.110] (II) intel(0): Year: 2010  Week: 1
[    60.110] (II) intel(0): EDID Version: 1.3
[    60.110] (II) intel(0): Digital Display Input
[    60.110] (II) intel(0): Max Image Size [cm]: horiz.: 29  vert.: 16
[    60.110] (II) intel(0): Gamma: 2.20
[    60.110] (II) intel(0): DPMS capabilities: StandBy Suspend Off
[    60.110] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[    60.110] (II) intel(0): First detailed timing is preferred mode
[    60.110] (II) intel(0): redX: 0.590 redY: 0.345   greenX: 0.325 greenY: 0.540
[    60.110] (II) intel(0): blueX: 0.150 blueY: 0.145   whiteX: 0.313 whiteY: 0.329
[    60.110] (II) intel(0): Manufacturer's mask: 0
[    60.110] (II) intel(0): Supported detailed timing:
[    60.110] (II) intel(0): clock: 70.2 MHz   Image Size:  293 x 164 mm
[    60.110] (II) intel(0): h_active: 1366  h_sync: 1414  h_sync_end 1446 h_blank_end 1474 h_border: 0
[    60.110] (II) intel(0): v_active: 768  v_sync: 771  v_sync_end 777 v_blanking: 793 v_border: 0
[    60.110] (II) intel(0): Supported detailed timing:
[    60.110] (II) intel(0): clock: 58.5 MHz   Image Size:  293 x 164 mm
[    60.110] (II) intel(0): h_active: 1366  h_sync: 1414  h_sync_end 1446 h_blank_end 1474 h_border: 0
[    60.110] (II) intel(0): v_active: 768  v_sync: 771  v_sync_end 777 v_blanking: 793 v_border: 0
[    60.110] (II) intel(0): Unknown vendor-specific block f
[    60.110] (II) intel(0):  B133XW03 V0
[    60.110] (II) intel(0): EDID (in hex):
[    60.110] (II) intel(0): 	00ffffffffffff0030ae904000000000
[    60.110] (II) intel(0): 	01140103801d1078ea15859758538a26
[    60.110] (II) intel(0): 	25505400000001010101010101010101
[    60.110] (II) intel(0): 	0101010101016c1b566c500019303020
[    60.110] (II) intel(0): 	360025a410000018da16566c50001930
[    60.110] (II) intel(0): 	3020360025a4100000180000000f008c
[    60.110] (II) intel(0): 	09328c092816090006af5630000000fe
[    60.110] (II) intel(0): 	004231333358573033205630200a000a
[    60.111] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[    60.111] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[    60.111] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[    60.111] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[    60.111] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[    60.111] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[    60.111] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[    60.111] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[    60.111] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[    60.111] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[    60.111] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[    60.111] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[    60.111] (II) intel(0): Printing probed modes for output LVDS1
[    60.111] (II) intel(0): Modeline "1366x768"x60.1   70.20  1366 1414 1446 1474  768 771 777 793 -hsync -vsync (47.6 kHz eP)
[    60.111] (II) intel(0): Modeline "1366x768"x50.0   58.50  1366 1414 1446 1474  768 771 777 793 -hsync -vsync (39.7 kHz e)
[    60.111] (II) intel(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz d)
[    60.111] (II) intel(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz d)
[    60.111] (II) intel(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz d)
[    60.111] (II) intel(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz d)
[    60.123] (II) intel(0): EDID for output VGA1
[    60.136] (II) intel(0): EDID for output HDMI1
[    60.176] (II) intel(0): EDID for output DP1
[    60.176] (II) intel(0): Output LVDS1 connected
[    60.176] (II) intel(0): Output VGA1 disconnected
[    60.176] (II) intel(0): Output HDMI1 disconnected
[    60.176] (II) intel(0): Output DP1 disconnected
[    60.176] (II) intel(0): Using exact sizes for initial modes
[    60.176] (II) intel(0): Output LVDS1 using initial mode 1366x768
[    60.176] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[    60.176] (II) intel(0): Kernel page flipping support detected, enabling
[    60.177] (==) intel(0): DPI set to (96, 96)
[    60.177] (II) Loading sub module "fb"
[    60.177] (II) LoadModule: "fb"
[    60.177] (II) Loading /usr/lib/xorg/modules/libfb.so
[    60.177] (II) Module fb: vendor="X.Org Foundation"
[    60.177] 	compiled for 1.14.0, module version = 1.0.0
[    60.177] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    60.177] (II) Loading sub module "dri2"
[    60.177] (II) LoadModule: "dri2"
[    60.177] (II) Module "dri2" already built-in
[    60.177] (==) Depth 24 pixmap format is 32 bpp
[    60.177] (II) intel(0): [DRI2] Setup complete
[    60.177] (II) intel(0): [DRI2]   DRI driver: i965
[    60.177] (II) intel(0): Allocated new frame buffer 1408x768 stride 5632, tiled
[    60.189] (II) UXA(0): Driver registered support for the following operations:
[    60.189] (II)         solid
[    60.189] (II)         copy
[    60.189] (II)         composite (RENDER acceleration)
[    60.189] (II)         put_image
[    60.189] (II)         get_image
[    60.189] (==) intel(0): Backing store disabled
[    60.189] (==) intel(0): Silken mouse enabled
[    60.189] (II) intel(0): Initializing HW Cursor
[    60.189] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[    60.193] (==) intel(0): DPMS enabled
[    60.193] (==) intel(0): Intel XvMC decoder enabled
[    60.193] (II) intel(0): Set up textured video
[    60.193] (II) intel(0): [XvMC] xvmc_vld driver initialized.
[    60.193] (II) intel(0): direct rendering: DRI2 Enabled
[    60.193] (==) intel(0): hotplug detection: "enabled"
[    60.220] (--) RandR disabled
[    60.241] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[    60.241] (II) AIGLX: enabled GLX_INTEL_swap_event
[    60.241] (II) AIGLX: enabled GLX_ARB_create_context
[    60.241] (II) AIGLX: enabled GLX_ARB_create_context_profile
[    60.241] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[    60.241] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[    60.241] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[    60.241] (II) AIGLX: Loaded and initialized i965
[    60.241] (II) GLX: Initialized DRI2 GL provider for screen 0
[    60.242] (II) intel(0): Setting screen physical size to 361 x 203
[    60.317] (II) config/udev: Adding input device Power Button (/dev/input/event9)
[    60.317] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    60.317] (II) LoadModule: "evdev"
[    60.317] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    60.317] (II) Module evdev: vendor="X.Org Foundation"
[    60.317] 	compiled for 1.14.0, module version = 2.8.0
[    60.317] 	Module class: X.Org XInput Driver
[    60.317] 	ABI class: X.Org XInput driver, version 19.1
[    60.317] (II) Using input driver 'evdev' for 'Power Button'
[    60.317] (**) Power Button: always reports core events
[    60.317] (**) evdev: Power Button: Device: "/dev/input/event9"
[    60.317] (--) evdev: Power Button: Vendor 0 Product 0x1
[    60.317] (--) evdev: Power Button: Found keys
[    60.317] (II) evdev: Power Button: Configuring as keyboard
[    60.318] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input9/event9"
[    60.318] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    60.318] (**) Option "xkb_rules" "evdev"
[    60.318] (**) Option "xkb_model" "evdev"
[    60.318] (**) Option "xkb_layout" "us"
[    60.361] (II) config/udev: Adding input device Video Bus (/dev/input/event10)
[    60.361] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    60.361] (II) Using input driver 'evdev' for 'Video Bus'
[    60.361] (**) Video Bus: always reports core events
[    60.361] (**) evdev: Video Bus: Device: "/dev/input/event10"
[    60.361] (--) evdev: Video Bus: Vendor 0 Product 0x6
[    60.361] (--) evdev: Video Bus: Found keys
[    60.361] (II) evdev: Video Bus: Configuring as keyboard
[    60.361] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input10/event10"
[    60.361] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[    60.361] (**) Option "xkb_rules" "evdev"
[    60.361] (**) Option "xkb_model" "evdev"
[    60.361] (**) Option "xkb_layout" "us"
[    60.362] (II) config/udev: Adding input device Power Button (/dev/input/event8)
[    60.362] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    60.362] (II) Using input driver 'evdev' for 'Power Button'
[    60.362] (**) Power Button: always reports core events
[    60.362] (**) evdev: Power Button: Device: "/dev/input/event8"
[    60.362] (--) evdev: Power Button: Vendor 0 Product 0x1
[    60.362] (--) evdev: Power Button: Found keys
[    60.362] (II) evdev: Power Button: Configuring as keyboard
[    60.362] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input8/event8"
[    60.362] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[    60.362] (**) Option "xkb_rules" "evdev"
[    60.362] (**) Option "xkb_model" "evdev"
[    60.362] (**) Option "xkb_layout" "us"
[    60.363] (II) config/udev: Adding input device Lid Switch (/dev/input/event7)
[    60.363] (II) No input driver specified, ignoring this device.
[    60.363] (II) This device may have been added with another device file.
[    60.363] (II) config/udev: Adding drm device (/dev/dri/card0)
[    60.364] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event4)
[    60.364] (II) No input driver specified, ignoring this device.
[    60.364] (II) This device may have been added with another device file.
[    60.364] (II) config/udev: Adding input device HDA Intel MID HDMI/DP,pcm=3 (/dev/input/event5)
[    60.364] (II) No input driver specified, ignoring this device.
[    60.364] (II) This device may have been added with another device file.
[    60.365] (II) config/udev: Adding input device Integrated Camera (/dev/input/event2)
[    60.365] (**) Integrated Camera: Applying InputClass "evdev keyboard catchall"
[    60.365] (II) Using input driver 'evdev' for 'Integrated Camera'
[    60.365] (**) Integrated Camera: always reports core events
[    60.365] (**) evdev: Integrated Camera: Device: "/dev/input/event2"
[    60.365] (--) evdev: Integrated Camera: Vendor 0x4f2 Product 0xb1fc
[    60.365] (--) evdev: Integrated Camera: Found keys
[    60.365] (II) evdev: Integrated Camera: Configuring as keyboard
[    60.365] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.0/input/input2/event2"
[    60.365] (II) XINPUT: Adding extended input device "Integrated Camera" (type: KEYBOARD, id 9)
[    60.365] (**) Option "xkb_rules" "evdev"
[    60.365] (**) Option "xkb_model" "evdev"
[    60.365] (**) Option "xkb_layout" "us"
[    60.365] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[    60.366] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[    60.366] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[    60.366] (**) AT Translated Set 2 keyboard: always reports core events
[    60.366] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[    60.366] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[    60.366] (--) evdev: AT Translated Set 2 keyboard: Found keys
[    60.366] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[    60.366] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[    60.366] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 10)
[    60.366] (**) Option "xkb_rules" "evdev"
[    60.366] (**) Option "xkb_model" "evdev"
[    60.366] (**) Option "xkb_layout" "us"
[    60.367] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event3)
[    60.367] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[    60.367] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[    60.367] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[    60.367] (II) LoadModule: "synaptics"
[    60.367] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[    60.367] (II) Module synaptics: vendor="X.Org Foundation"
[    60.367] 	compiled for 1.14.0, module version = 1.6.3
[    60.367] 	Module class: X.Org XInput Driver
[    60.367] 	ABI class: X.Org XInput driver, version 19.1
[    60.367] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[    60.367] (**) SynPS/2 Synaptics TouchPad: always reports core events
[    60.367] (**) Option "Device" "/dev/input/event3"
[    60.413] (II) synaptics: SynPS/2 Synaptics TouchPad: ignoring touch events for semi-multitouch device
[    60.413] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5888
[    60.413] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 5036
[    60.413] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[    60.413] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[    60.413] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
[    60.413] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[    60.413] (**) Option "TapButton1" "1"
[    60.413] (**) Option "TapButton2" "2"
[    60.413] (**) Option "TapButton3" "3"
[    60.413] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[    60.413] (**) SynPS/2 Synaptics TouchPad: always reports core events
[    60.426] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio4/input/input3/event3"
[    60.426] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 11)
[    60.426] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[    60.426] (**) synaptics: SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75
[    60.426] (**) synaptics: SynPS/2 Synaptics TouchPad: AccelFactor is now 0.035
[    60.427] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[    60.427] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[    60.427] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[    60.427] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[    60.427] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[    60.427] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[    60.427] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[    60.428] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/event11)
[    60.428] (**) TPPS/2 IBM TrackPoint: Applying InputClass "evdev pointer catchall"
[    60.428] (II) Using input driver 'evdev' for 'TPPS/2 IBM TrackPoint'
[    60.428] (**) TPPS/2 IBM TrackPoint: always reports core events
[    60.428] (**) evdev: TPPS/2 IBM TrackPoint: Device: "/dev/input/event11"
[    60.428] (--) evdev: TPPS/2 IBM TrackPoint: Vendor 0x2 Product 0xa
[    60.428] (--) evdev: TPPS/2 IBM TrackPoint: Found 3 mouse buttons
[    60.428] (--) evdev: TPPS/2 IBM TrackPoint: Found relative axes
[    60.428] (--) evdev: TPPS/2 IBM TrackPoint: Found x and y relative axes
[    60.428] (II) evdev: TPPS/2 IBM TrackPoint: Configuring as mouse
[    60.428] (**) evdev: TPPS/2 IBM TrackPoint: YAxisMapping: buttons 4 and 5
[    60.428] (**) evdev: TPPS/2 IBM TrackPoint: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    60.428] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio4/serio5/input/input11/event11"
[    60.428] (II) XINPUT: Adding extended input device "TPPS/2 IBM TrackPoint" (type: MOUSE, id 12)
[    60.428] (II) evdev: TPPS/2 IBM TrackPoint: initialized for relative axes.
[    60.429] (**) TPPS/2 IBM TrackPoint: (accel) keeping acceleration scheme 1
[    60.429] (**) TPPS/2 IBM TrackPoint: (accel) acceleration profile 0
[    60.429] (**) TPPS/2 IBM TrackPoint: (accel) acceleration factor: 2.000
[    60.429] (**) TPPS/2 IBM TrackPoint: (accel) acceleration threshold: 4
[    60.429] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/mouse1)
[    60.429] (II) No input driver specified, ignoring this device.
[    60.429] (II) This device may have been added with another device file.
[    60.429] (II) config/udev: Adding input device PC Speaker (/dev/input/event1)
[    60.429] (II) No input driver specified, ignoring this device.
[    60.429] (II) This device may have been added with another device file.
[    60.430] (II) config/udev: Adding input device ThinkPad Extra Buttons (/dev/input/event6)
[    60.430] (**) ThinkPad Extra Buttons: Applying InputClass "evdev keyboard catchall"
[    60.430] (II) Using input driver 'evdev' for 'ThinkPad Extra Buttons'
[    60.430] (**) ThinkPad Extra Buttons: always reports core events
[    60.430] (**) evdev: ThinkPad Extra Buttons: Device: "/dev/input/event6"
[    60.430] (--) evdev: ThinkPad Extra Buttons: Vendor 0x17aa Product 0x5054
[    60.430] (--) evdev: ThinkPad Extra Buttons: Found keys
[    60.430] (II) evdev: ThinkPad Extra Buttons: Configuring as keyboard
[    60.430] (**) Option "config_info" "udev:/sys/devices/platform/thinkpad_acpi/input/input6/event6"
[    60.430] (II) XINPUT: Adding extended input device "ThinkPad Extra Buttons" (type: KEYBOARD, id 13)
[    60.430] (**) Option "xkb_rules" "evdev"
[    60.430] (**) Option "xkb_model" "evdev"
[    60.430] (**) Option "xkb_layout" "us"
[    60.438] (II) intel(0): EDID vendor "LEN", prod id 16528
[    60.438] (II) intel(0): Printing DDC gathered Modelines:
[    60.438] (II) intel(0): Modeline "1366x768"x0.0   70.20  1366 1414 1446 1474  768 771 777 793 -hsync -vsync (47.6 kHz eP)
[    60.438] (II) intel(0): Modeline "1366x768"x0.0   58.50  1366 1414 1446 1474  768 771 777 793 -hsync -vsync (39.7 kHz e)
[    64.766] (II) AIGLX: Suspending AIGLX clients for VT switch
[   231.972] (II) evdev: ThinkPad Extra Buttons: Close
[   231.973] (II) UnloadModule: "evdev"
[   231.973] (II) evdev: TPPS/2 IBM TrackPoint: Close
[   231.973] (II) UnloadModule: "evdev"
[   231.973] (II) UnloadModule: "synaptics"
[   231.973] (II) evdev: AT Translated Set 2 keyboard: Close
[   231.973] (II) UnloadModule: "evdev"
[   231.973] (II) evdev: Integrated Camera: Close
[   231.973] (II) UnloadModule: "evdev"
[   231.973] (II) evdev: Power Button: Close
[   231.973] (II) UnloadModule: "evdev"
[   231.973] (II) evdev: Video Bus: Close
[   231.973] (II) UnloadModule: "evdev"
[   231.973] (II) evdev: Power Button: Close
[   231.973] (II) UnloadModule: "evdev"
[   231.999] Server terminated successfully (0). Closing log file. 

Last edited by yotama9 (2013-04-18 12:12:26)

Offline

#2 2013-04-18 12:12:13

yotama9
Member
Registered: 2010-10-06
Posts: 70

Re: Gnome-session failed to start after upgrade to 3.8 [solved]

Solved in another (Hebrew) forum.

 pacman -Syu 

Offline

Board footer

Powered by FluxBB