You are not logged in.
Hello.
Upon starting "virtualbox" I get the message
WARNING: The vboxdrv kernel module is not loaded. Either there is no module
available for the current kernel (3.8.8-1-ARCH) or it failed to
load. Please reinstall the kernel module virtualbox-host-modules or
if you don't use our stock kernel compile the modules with
sudo dkms autoinstall
You will not be able to start VMs until this problem is fixed.What I did:
modprobed "vboxdrv"
updated "linux, linux-headers, virtualbox-host-modules, virtualbox"
Rebuilt initramfs
added "vboxdrv" to virtualbox.conf in /etc/modules-load.d/
rebooted several times
googled
read the fine manual
What that did:
# modprobe vboxdrv
modprobe: ERROR: could not insert 'vboxdrv': Invalid argument'lsmod | grep vbox' returns nothing
dmesg | grep vboxdrv
1008:[ 120.238619] vboxdrv: disagrees about version of symbol pv_mmu_ops
1009:[ 120.238625] vboxdrv: Unknown symbol pv_mmu_ops (err -22)I also did the "non-standard kernel" steps according to the wiki, with same results. Any other post i found told me to basically update and reboot, which I did several times, but no results.
Any help is appreciated.
Last edited by oniichan (2013-04-22 15:51:59)
Offline
Could you post your "uname -a" and "pacman -Qi linux"?
Offline
Could you post your "uname -a" and "pacman -Qi linux"?
$ uname -a
Linux panda 3.8.8-1-ARCH #1 SMP PREEMPT Wed Apr 17 10:57:28 CEST 2013 x86_64 GNU/Linuxpacman -Qi linux
Name : linux
Version : 3.8.8-1
Description : The linux kernel and modules
Architecture : x86_64
URL : http://www.kernel.org/
Licenses : GPL2
Groups : base
Provides : kernel26=3.8.8
Depends On : coreutils linux-firmware kmod mkinitcpio>=0.7
Optional Deps : crda: to set the correct wireless channels of your country
Required By : tp_smapi virtualbox-host-modules
Optional For : None
Conflicts With : kernel26
Replaces : kernel26
Installed Size : 64410.00 KiB
Packager : Tobias Powalowski <tpowa@archlinux.org>
Build Date : Wed 17 Apr 2013 11:04:12 AM CEST
Install Date : Mon 22 Apr 2013 04:28:19 PM CEST
Install Reason : Explicitly installed
Install Script : Yes
Validated By : SignatureOffline
So far looks good, could you post "pacman -Qi virtualbox-host-modules" too?
Offline
So far looks good, could you post "pacman -Qi virtualbox-host-modules" too?
$ pacman -Qi virtualbox-host-modules
Name : virtualbox-host-modules
Version : 4.2.12-1
Description : Host kernel modules for VirtualBox
Architecture : x86_64
URL : http://virtualbox.org
Licenses : GPL
Groups : None
Provides : None
Depends On : linux>=3.8 linux<3.9
Optional Deps : None
Required By : virtualbox
Optional For : None
Conflicts With : virtualbox-modules
Replaces : virtualbox-modules
Installed Size : 160.00 KiB
Packager : Sébastien Luttringer <seblu@seblu.net>
Build Date : Fri 12 Apr 2013 06:14:45 PM CEST
Install Date : Mon 22 Apr 2013 04:55:39 PM CEST
Install Reason : Installed as a dependency for another package
Install Script : Yes
Validated By : SignatureOffline
Remove virtualbox-host-modules and try virtualbox-host-dkms
Offline
$ pacman -Qi virtualbox-host-modules Name : virtualbox-host-modules Version : 4.2.12-1 ... Build Date : Fri 12 Apr 2013 06:14:45 PM CEST
There already is virtualbox-host-modules-4.2.12-2 (I'm running -Syu just now). Can you update and check if it works?
Remove virtualbox-host-modules and try virtualbox-host-dkms
He is running stock kernel, with outdated vboxdrv.
Last edited by hiciu (2013-04-22 15:31:41)
Offline
p
oniichan wrote:$ pacman -Qi virtualbox-host-modules Name : virtualbox-host-modules Version : 4.2.12-1 ... Build Date : Fri 12 Apr 2013 06:14:45 PM CESTThere already is virtualbox-host-modules-4.2.12-2 (I'm running -Syu just now). Can you update and check if it works?
proudzhu wrote:Remove virtualbox-host-modules and try virtualbox-host-dkms
He is running stock kernel, with outdated vboxdrv.
$ pacman -Syyuu
:: Synchronizing package databases...
testing 31.4 KiB 176K/s 00:00 [##############################] 100%
core 106.1 KiB 167K/s 00:01 [##############################] 100%
extra 1517.3 KiB 349K/s 00:04 [##############################] 100%
community 1943.1 KiB 449K/s 00:04 [##############################] 100%
multilib 104.0 KiB 391K/s 00:00 [##############################] 100%
:: Starting full system upgrade...
there is nothing to doDo you have any activated repo that I don't?
Offline
No, I don't even use testing. Just core, extra, community and multilib. Your mirror may not have yet all packages updated.
For now you can just upgrade this by hand:
wget http://ftp.hosteurope.de/mirror/ftp.archlinux.org/community/os/x86_64/virtualbox-host-modules-4.2.12-2-x86_64.pkg.tar.xz{,.sig}
sudo pacman -U virtualbox-host-modules-4.2.12-2-x86_64.pkg.tar.xzYou can monitor your mirror's lag at https://www.archlinux.org/mirrors/status/.
Offline
Offline
No, I don't even use testing. Just core, extra, community and multilib. Your mirror may not have yet all packages updated.
For now you can just upgrade this by hand:
wget http://ftp.hosteurope.de/mirror/ftp.archlinux.org/community/os/x86_64/virtualbox-host-modules-4.2.12-2-x86_64.pkg.tar.xz{,.sig} sudo pacman -U virtualbox-host-modules-4.2.12-2-x86_64.pkg.tar.xzYou can monitor your mirror's lag at https://www.archlinux.org/mirrors/status/.
I just waited for a few minutes and my mirror updated now. The virtual machine boots now.
Thanks for the help, ladies and gentlemen.
Offline