You are not logged in.
Pages: 1
I can t istall compiz on arch linux
Offline
Please search the forums, wiki etc.
Offline
I can t istall compiz on arch linux
Are you able to install the Arch Linux operating system?
Offline
I can t istall compiz on arch linux
Is that a question, or an assertion?
Nothing is too wonderful to be true, if it be consistent with the laws of nature -- Michael Faraday
The shortest way to ruin a country is to give power to demagogues.— Dionysius of Halicarnassus
---
How to Ask Questions the Smart Way
Offline
I can not install compiz
I do not find it in the stores official
Looked at aur packages found but can not be installed
Offline
I can not install compiz
I do not find it in the stores official
Looked at aur packages found but can not be installed
So....? What have you done? Have you searched the forums? Have you read the wiki? Do you have errors? Did your computer just say "I'm afraid I can't do that, Dave."?
Offline
Looked at aur packages found but can not be installed
Offline
I do not find it in the stores official
Correct.
Looked at aur packages found but can not be installed
The AURs are not officially supported, and are treated somewhat differently. I assume you have read this wiki article on how to use the AUR
Please elaborate on what you tried (including the explicit commands) and the error messages you received.
Also, <Moderator Mode> this is an AUR issue, so I am moving the thread to the AUR sub-forum Newbie sub-forums</Moderator Mode>
Last edited by ewaller (2013-06-10 16:18:26)
Nothing is too wonderful to be true, if it be consistent with the laws of nature -- Michael Faraday
The shortest way to ruin a country is to give power to demagogues.— Dionysius of Halicarnassus
---
How to Ask Questions the Smart Way
Offline
I also have trouble with compiz installation. In particular the only emerald package on AUR (emerald-git) is not operational, as it requires a non-existing package compiz-core.
According to pkgstats about 10% (or maybe even more – there are various packages) of users use compiz. I'm really interested how do they deal with it.
I understand that compiz was dropped because it is not developed actively, but is there any replacement for it?
Last edited by senjin (2013-06-10 16:29:51)
Offline
Have you tried modifying the PKGBUILD of emerald to depend on whichever compiz package you intend to use?
Offline
[haithem@PC compiz--]$ makepkg
==> Making package: compiz-bzr 3659-1 (Mon Jun 10 16:53:54 UTC 2013)
==> Checking runtime dependencies...
==> Missing dependencies:
-> gmock
-> pyrex
==> Checking buildtime dependencies...
==> ERROR: Could not resolve all dependencies.
[haithem@PC compiz--]$ sudo pacman - gmock pyrex
error: argument '-' specified without input on stdin
[haithem@PC compiz--]$ sudo pacman -S gmock pyrex
resolving dependencies...
looking for inter-conflicts...
Packages (3): gtest-ubuntu-1.6.0-3 gmock-ubuntu-1.6.0-3 pyrex-0.9.9-3
Total Download Size: 0.29 MiB
Total Installed Size: 3.44 MiB
:: Proceed with installation? [Y/n]
:: Retrieving packages ...
gtest-ubuntu-1.6.0-3-any 156.2 KiB 66.5K/s 00:02 [################################] 100%
gmock-ubuntu-1.6.0-3-i686 144.5 KiB 55.7K/s 00:03 [################################] 100%
(3/3) checking keys in keyring [################################] 100%
(3/3) checking package integrity [################################] 100%
error: gtest-ubuntu: missing required signature
:: File /var/cache/pacman/pkg/gtest-ubuntu-1.6.0-3-any.pkg.tar.xz is corrupted (invalid or corrupted package (PGP signature)).
Do you want to delete it? [Y/n] n
error: gmock-ubuntu: missing required signature
:: File /var/cache/pacman/pkg/gmock-ubuntu-1.6.0-3-i686.pkg.tar.xz is corrupted (invalid or corrupted package (PGP signature)).
Do you want to delete it? [Y/n] y
error: failed to commit transaction (invalid or corrupted package)
Errors occurred, no packages were upgraded.
[haithem@PC compiz--]$
Offline
Those don't seem to be in our repositories. Please paste your /etc/pacman.conf file.
Nothing is too wonderful to be true, if it be consistent with the laws of nature -- Michael Faraday
The shortest way to ruin a country is to give power to demagogues.— Dionysius of Halicarnassus
---
How to Ask Questions the Smart Way
Offline
#
# /etc/pacman.conf
#
# See the pacman.conf(5) manpage for option and repository directives
#
# GENERAL OPTIONS
#
[options]
# The following paths are commented out with their default values listed.
# If you wish to use different paths, uncomment and update the paths.
#RootDir = /
#DBPath = /var/lib/pacman/
#CacheDir = /var/cache/pacman/pkg/
#LogFile = /var/log/pacman.log
#GPGDir = /etc/pacman.d/gnupg/
HoldPkg = pacman glibc
#XferCommand = /usr/bin/curl -C - -f %u > %o
#XferCommand = /usr/bin/wget --passive-ftp -c -O %o %u
#CleanMethod = KeepInstalled
#UseDelta = 0.7
Architecture = auto
# Pacman won't upgrade packages listed in IgnorePkg and members of IgnoreGroup
#IgnorePkg =
#IgnoreGroup =
#NoUpgrade =
#NoExtract =
# Misc options
#UseSyslog
#Color
#TotalDownload
CheckSpace
#VerbosePkgLists
# By default, pacman accepts packages signed by keys that its local keyring
# trusts (see pacman-key and its man page), as well as unsigned packages.
SigLevel = Required DatabaseOptional
LocalFileSigLevel = Optional
#RemoteFileSigLevel = Required
# NOTE: You must run `pacman-key --init` before first using pacman; the local
# keyring can then be populated with the keys of all official Arch Linux
# packagers with `pacman-key --populate archlinux`.
#
# REPOSITORIES
# - can be defined here or included from another file
# - pacman will search repositories in the order defined here
# - local/custom mirrors can be added here or in separate files
# - repositories listed first will take precedence when packages
# have identical names, regardless of version number
# - URLs will have $repo replaced by the name of the current repo
# - URLs will have $arch replaced by the name of the architecture
#
# Repository entries are of the format:
# [repo-name]
# Server = ServerName
# Include = IncludePath
#
# The header [repo-name] is crucial - it must be present and
# uncommented to enable the repo.
#
# The testing repositories are disabled by default. To enable, uncomment the
# repo name header and Include lines. You can add preferred servers immediately
# after the header, and they will be used before the default mirrors.
#[testing]
Include = /etc/pacman.d/mirrorlist
[core]
Include = /etc/pacman.d/mirrorlist
[extra]
Include = /etc/pacman.d/mirrorlist
#[community-testing]
Include = /etc/pacman.d/mirrorlist
[community]
Include = /etc/pacman.d/mirrorlist
# An example of a custom package repository. See the pacman manpage for
# tips on creating your own repositories.
#[custom]
#SigLevel = Optional TrustAll
#Server = file:///home/custompkgs
[mate]
SigLevel = Optional TrustAll
Server = [url]http://repo.mate-desktop.org/archlinux/$arch[/url]
[archlinuxfr]
SigLevel = Never
Server = [url]http://repo.archlinux.fr/$arch[/url]
[unity]
Server = [url]http://unity.xe-xe.org/$arch[/url]
[unity-extra]
Server = [url]http://unity.xe-xe.org/extra/$arch[/url]Last edited by jasonwryan (2013-06-10 18:00:38)
Offline
Have you tried modifying the PKGBUILD of emerald to depend on whichever compiz package you intend to use?
Ok, emerald-git seems to work with compiz-bzr... but is it a reliable solution? Often various packages require specific versions of the other packages.
Offline
Haithem, do those Unity repos use signed packages? If not, you need to specify a SigLevel.
Last edited by Scimmia (2013-06-10 17:47:22)
Offline
Please use code tags when pasting to the boards: https://wiki.archlinux.org/index.php/Fo … s_and_Code
Offline
#
# /etc/pacman.conf
#
# See the pacman.conf(5) manpage for option and repository directives
#
# GENERAL OPTIONS
#
[options]
# The following paths are commented out with their default values listed.
# If you wish to use different paths, uncomment and update the paths.
#RootDir = /
#DBPath = /var/lib/pacman/
#CacheDir = /var/cache/pacman/pkg/
#LogFile = /var/log/pacman.log
#GPGDir = /etc/pacman.d/gnupg/
HoldPkg = pacman glibc
#XferCommand = /usr/bin/curl -C - -f %u > %o
#XferCommand = /usr/bin/wget --passive-ftp -c -O %o %u
#CleanMethod = KeepInstalled
#UseDelta = 0.7
Architecture = auto
# Pacman won't upgrade packages listed in IgnorePkg and members of IgnoreGroup
#IgnorePkg =
#IgnoreGroup =
#NoUpgrade =
#NoExtract =
# Misc options
#UseSyslog
#Color
#TotalDownload
CheckSpace
#VerbosePkgLists
# By default, pacman accepts packages signed by keys that its local keyring
# trusts (see pacman-key and its man page), as well as unsigned packages.
SigLevel = Required DatabaseOptional
LocalFileSigLevel = Optional
#RemoteFileSigLevel = Required
# NOTE: You must run `pacman-key --init` before first using pacman; the local
# keyring can then be populated with the keys of all official Arch Linux
# packagers with `pacman-key --populate archlinux`.
#
# REPOSITORIES
# - can be defined here or included from another file
# - pacman will search repositories in the order defined here
# - local/custom mirrors can be added here or in separate files
# - repositories listed first will take precedence when packages
# have identical names, regardless of version number
# - URLs will have $repo replaced by the name of the current repo
# - URLs will have $arch replaced by the name of the architecture
#
# Repository entries are of the format:
# [repo-name]
# Server = ServerName
# Include = IncludePath
#
# The header [repo-name] is crucial - it must be present and
# uncommented to enable the repo.
#
# The testing repositories are disabled by default. To enable, uncomment the
# repo name header and Include lines. You can add preferred servers immediately
# after the header, and they will be used before the default mirrors.
#[testing]
Include = /etc/pacman.d/mirrorlist
[core]
Include = /etc/pacman.d/mirrorlist
[extra]
Include = /etc/pacman.d/mirrorlist
#[community-testing]
Include = /etc/pacman.d/mirrorlist
[community]
Include = /etc/pacman.d/mirrorlist
# An example of a custom package repository. See the pacman manpage for
# tips on creating your own repositories.
#[custom]
#SigLevel = Optional TrustAll
#Server = file:///home/custompkgs
[mate]
SigLevel = Optional TrustAll
Server = http://repo.mate-desktop.org/archlinux/$arch
[archlinuxfr]
SigLevel = Never
Server = http://repo.archlinux.fr/$arch
#[unity]
Server = http://unity.xe-xe.org/$arch
#[unity-extra]
Server = http://unity.xe-xe.org/extra/$archOffline
P.S., you'll need to have the repo name-line uncommented if you want it to function properly. Or, was your point to comment them out?
All the best,
-HG
Last edited by HalosGhost (2013-06-10 20:11:31)
Offline
You can install compiz using the Arch Linux ARM index.
Last edited by unilx (2013-06-11 13:00:45)
Offline
I understand that compiz was dropped because it is not developed actively, but is there any replacement for it?
Yes: Unity, which is the reason Compiz isn't actively developed as a window manager any more. Compiz has been suffering a lingering death for a couple years now, so this isn't a problem stemming from Arch. You'll need to check dependencies (the packages Compiz depends on have probably been updated steadily, while Compiz has not), probably tweak a PKGBUILD or two as jakobcreutzfeldt suggested, and possibly contact the maintainer.
If you mean "replacement" in the sense of something with similar visual effects, KDE's Kwin is the only similar thing I've ever seen.
@unlix: That's assuming it doesn't require rolling back any vital packages and, depending on when it was dropped, the ARM packages may be unreliable (probably compiled using PKGBUILDs made obsolete by the recent filesystem change).
Offline
Pages: 1