You are not logged in.

Pages: 1

#1 2013-07-01 05:03:42

deca
Member
From: CA, USA
Registered: 2012-11-17
Posts: 5

[SOLVED] Bumblee + Intel/NVIDIA: Failed to load module "nvidia"

Hello, I'd like to run WoW via optirun but I'm encountering the following error:

optirun wine Wow.exe -->                                                                                                           
[ 2496.692969] [ERROR]Cannot access secondary GPU - error: [XORG] (EE) Failed to load module "nvidia" (module does not exist, 0)
[ 2496.693027] [ERROR]Aborting because fallback start is disabled.

Attempting to run the simpler glxgears program yields the same error:

 optirun glxgears -info -->
[  123.735534] [ERROR]Cannot access secondary GPU - error: [XORG] (EE) Failed to load module "nvidia" (module does not exist, 0)
[  123.735609] [ERROR]Aborting because fallback start is disabled.

I've commented out all (I think) attempts to blacklist nvidia and modified config files to prevent nouveau from loading (nouveau was previously installed):
{

  • Commented out /usr/lib/modprobe.d/bumblebee.conf:

    cat /usr/lib/modprobe.d/bumblebee.conf
#blacklist nvidia

  • There is nothing in /etc/modprobe.d/ blacklisting nvidia.

  • Commented out nouveau in /etc/mkinitcpio.conf (and ran mkinitcpio -p linux):

    head /etc/mkinitcpio.conf -->
# vim:set ft=sh
# MODULES
# The following modules are loaded before any boot hooks are
# run.  Advanced users may wish to specify all system modules
# in this array.  For instance:
#     MODULES="piix ide_disk reiserfs"
#MODULES="nouveau"

  • My syslinux.cfg:

    cat /boot/syslinux/syslinux.cfg |grep APPEND -->
APPEND root=/dev/sda1 ro splash modprobe.blacklist=pcspkr pcie_aspm=force acpi_osi=Linux i915.i915_enable_rc6=1

}

My Xorg.0.log:

#### 
cat /var/log/Xorg.0.log -->
[     5.894] 
X.Org X Server 1.14.2
Release Date: 2013-06-25
[     5.894] X Protocol Version 11, Revision 0
[     5.894] Build Operating System: Linux 3.9.7-1-ARCH x86_64 
[     5.894] Current Operating System: Linux ninjalappy 3.9.8-1-ARCH #1 SMP PREEMPT Thu Jun 27 21:37:31 CEST 2013 x86_64
[     5.894] Kernel command line: root=/dev/sda1 ro splash modprobe.blacklist=pcspkr pcie_aspm=force acpi_osi=Linux i915.i915_enable_rc6=1 initrd=../initramfs-linux.img BOOT_IMAGE=../vmlinuz-linux 
[     5.894] Build Date: 25 June 2013  06:53:24PM
[     5.894]  
[     5.894] Current version of pixman: 0.30.0
[     5.895] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[     5.895] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[     5.895] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Jun 30 12:09:38 2013
[     5.897] (==) Using config directory: "/etc/X11/xorg.conf.d"
[     5.898] (==) No Layout section.  Using the first Screen section.
[     5.898] (==) No screen section available. Using defaults.
[     5.898] (**) |-->Screen "Default Screen Section" (0)
[     5.898] (**) |   |-->Monitor "<default monitor>"
[     5.898] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[     5.898] (==) Automatically adding devices
[     5.898] (==) Automatically enabling devices
[     5.898] (==) Automatically adding GPU devices
[     5.899] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[     5.899] 	Entry deleted from font path.
[     5.901] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[     5.901] 	Entry deleted from font path.
[     5.901] 	(Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[     5.901] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[     5.901] 	Entry deleted from font path.
[     5.901] 	(Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[     5.901] (==) FontPath set to:
	/usr/share/fonts/misc/,
	/usr/share/fonts/TTF/,
	/usr/share/fonts/Type1/
[     5.901] (==) ModulePath set to "/usr/lib/xorg/modules"
[     5.901] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[     5.901] (II) Loader magic: 0x7fdc20
[     5.901] (II) Module ABI versions:
[     5.901] 	X.Org ANSI C Emulation: 0.4
[     5.901] 	X.Org Video Driver: 14.1
[     5.901] 	X.Org XInput driver : 19.1
[     5.901] 	X.Org Server Extension : 7.0
[     5.902] (II) xfree86: Adding drm device (/dev/dri/card0)
[     5.903] (--) PCI:*(0:0:2:0) 8086:0116:1025:054f rev 9, Mem @ 0xd1400000/4194304, 0xc0000000/268435456, I/O @ 0x00004000/64
[     5.904] Initializing built-in extension Generic Event Extension
[     5.904] Initializing built-in extension SHAPE
[     5.904] Initializing built-in extension MIT-SHM
[     5.904] Initializing built-in extension XInputExtension
[     5.904] Initializing built-in extension XTEST
[     5.904] Initializing built-in extension BIG-REQUESTS
[     5.904] Initializing built-in extension SYNC
[     5.904] Initializing built-in extension XKEYBOARD
[     5.904] Initializing built-in extension XC-MISC
[     5.904] Initializing built-in extension SECURITY
[     5.904] Initializing built-in extension XINERAMA
[     5.904] Initializing built-in extension XFIXES
[     5.904] Initializing built-in extension RENDER
[     5.904] Initializing built-in extension RANDR
[     5.904] Initializing built-in extension COMPOSITE
[     5.904] Initializing built-in extension DAMAGE
[     5.904] Initializing built-in extension MIT-SCREEN-SAVER
[     5.904] Initializing built-in extension DOUBLE-BUFFER
[     5.904] Initializing built-in extension RECORD
[     5.904] Initializing built-in extension DPMS
[     5.904] Initializing built-in extension X-Resource
[     5.904] Initializing built-in extension XVideo
[     5.905] Initializing built-in extension XVideo-MotionCompensation
[     5.906] Initializing built-in extension XFree86-VidModeExtension
[     5.907] Initializing built-in extension XFree86-DGA
[     5.907] Initializing built-in extension XFree86-DRI
[     5.908] Initializing built-in extension DRI2
[     5.908] (II) LoadModule: "glx"
[     5.909] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[     5.910] (II) Module glx: vendor="X.Org Foundation"
[     5.910] 	compiled for 1.14.2, module version = 1.0.0
[     5.910] 	ABI class: X.Org Server Extension, version 7.0
[     5.910] (==) AIGLX enabled
[     5.911] Loading extension GLX
[     5.911] (==) Matched intel as autoconfigured driver 0
[     5.911] (==) Matched intel as autoconfigured driver 1
[     5.911] (==) Matched vesa as autoconfigured driver 2
[     5.911] (==) Matched modesetting as autoconfigured driver 3
[     5.911] (==) Matched fbdev as autoconfigured driver 4
[     5.911] (==) Assigned the driver to the xf86ConfigLayout
[     5.911] (II) LoadModule: "intel"
[     5.912] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[     5.914] (II) Module intel: vendor="X.Org Foundation"
[     5.914] 	compiled for 1.14.2, module version = 2.21.10
[     5.914] 	Module class: X.Org Video Driver
[     5.914] 	ABI class: X.Org Video Driver, version 14.1
[     5.915] (II) LoadModule: "vesa"
[     5.915] (WW) Warning, couldn't open module vesa
[     5.915] (II) UnloadModule: "vesa"
[     5.915] (II) Unloading vesa
[     5.915] (EE) Failed to load module "vesa" (module does not exist, 0)
[     5.915] (II) LoadModule: "modesetting"
[     5.915] (WW) Warning, couldn't open module modesetting
[     5.915] (II) UnloadModule: "modesetting"
[     5.915] (II) Unloading modesetting
[     5.915] (EE) Failed to load module "modesetting" (module does not exist, 0)
[     5.915] (II) LoadModule: "fbdev"
[     5.915] (WW) Warning, couldn't open module fbdev
[     5.915] (II) UnloadModule: "fbdev"
[     5.915] (II) Unloading fbdev
[     5.915] (EE) Failed to load module "fbdev" (module does not exist, 0)
[     5.915] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
	i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
	E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
	965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
	4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
	Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
	Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
	Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
	Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
	Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server,
	Ivybridge Server (GT2), HD Graphics, HD Graphics 4600,
	Haswell Desktop (GT3), HD Graphics, HD Graphics 4600,
	Haswell Mobile (GT3), HD Graphics, HD Graphics P4600/P4700,
	Haswell Server (GT3), Haswell (GT1), Haswell (GT2), Haswell (GT3),
	HD Graphics, Haswell (GT2), Haswell (GT3), Haswell SDV Desktop (GT1),
	Haswell SDV Desktop (GT2), Haswell SDV Desktop (GT3),
	Haswell SDV Mobile (GT1), Haswell SDV Mobile (GT2),
	Haswell SDV Mobile (GT3), Haswell SDV Server (GT1),
	Haswell SDV Server (GT2), Haswell SDV Server (GT3),
	Haswell SDV (GT1), Haswell SDV (GT2), Haswell SDV (GT3),
	Haswell SDV (GT1), Haswell SDV (GT2), Haswell SDV (GT3),
	Haswell ULT Desktop (GT1), Haswell ULT Desktop (GT2),
	Iris(TM) Graphics 5100, HD Graphics, HD Graphics 4400,
	HD Graphics 5000, Haswell ULT Server (GT1), Haswell ULT Server (GT2),
	Iris(TM) Graphics 5100, Haswell ULT (GT1), Haswell ULT (GT2),
	Iris(TM) Graphics 5100, HD Graphics, HD Graphics 4200,
	Iris(TM) Graphics 5100, Haswell CRW Desktop (GT1), HD Graphics 4600,
	Iris(TM) Pro Graphics 5200, Haswell CRW Mobile (GT1),
	HD Graphics 4600, Iris(TM) Pro Graphics 5200,
	Haswell CRW Server (GT1), Haswell CRW Server (GT2),
	Iris(TM) Pro Graphics 5200, Haswell CRW (GT1), Haswell CRW (GT2),
	Iris(TM) Pro Graphics 5200, Haswell CRW (GT1), Haswell CRW (GT2),
	Iris(TM) Pro Graphics 5200, ValleyView PO board
[     5.916] (++) using VT number 1
[     5.916] (II) intel(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[     5.916] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[     5.916] (==) intel(0): RGB weight 888
[     5.916] (==) intel(0): Default visual is TrueColor
[     5.916] (--) intel(0): Integrated Graphics Chipset: Intel(R) Sandybridge Mobile (GT2)
[     5.916] (**) intel(0): Relaxed fencing enabled
[     5.916] (**) intel(0): Wait on SwapBuffers? enabled
[     5.916] (**) intel(0): Triple buffering? enabled
[     5.916] (**) intel(0): Framebuffer tiled
[     5.916] (**) intel(0): Pixmaps tiled
[     5.916] (**) intel(0): 3D buffers tiled
[     5.917] (**) intel(0): SwapBuffers wait enabled
[     5.917] (==) intel(0): video overlay key set to 0x101fe
[     5.917] (II) intel(0): Output LVDS1 has no monitor section
[     6.016] (--) intel(0): found backlight control interface /sys/class/backlight/acpi_video0
[     6.018] (II) intel(0): Output VGA1 has no monitor section
[     6.018] (II) intel(0): Output HDMI1 has no monitor section
[     6.018] (II) intel(0): Output DP1 has no monitor section
[     6.018] (II) intel(0): EDID for output LVDS1
[     6.018] (II) intel(0): Manufacturer: INL  Model: 17  Serial#: 0
[     6.018] (II) intel(0): Year: 2010  Week: 0
[     6.018] (II) intel(0): EDID Version: 1.3
[     6.018] (II) intel(0): Digital Display Input
[     6.018] (II) intel(0): Max Image Size [cm]: horiz.: 31  vert.: 18
[     6.018] (II) intel(0): Gamma: 2.20
[     6.018] (II) intel(0): No DPMS capabilities specified
[     6.018] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[     6.018] (II) intel(0): First detailed timing is preferred mode
[     6.018] (II) intel(0): redX: 0.580 redY: 0.340   greenX: 0.310 greenY: 0.550
[     6.018] (II) intel(0): blueX: 0.155 blueY: 0.155   whiteX: 0.313 whiteY: 0.329
[     6.018] (II) intel(0): Manufacturer's mask: 0
[     6.018] (II) intel(0): Supported detailed timing:
[     6.018] (II) intel(0): clock: 71.0 MHz   Image Size:  309 x 174 mm
[     6.018] (II) intel(0): h_active: 1366  h_sync: 1414  h_sync_end 1446 h_blank_end 1498 h_border: 0
[     6.018] (II) intel(0): v_active: 768  v_sync: 769  v_sync_end 773 v_blanking: 790 v_border: 0
[     6.018] (II) intel(0): Unknown vendor-specific block 0
[     6.018] (II) intel(0):  INL
[     6.018] (II) intel(0):  BT140GW03V2
[     6.018] (II) intel(0): EDID (in hex):
[     6.018] (II) intel(0): 	00ffffffffffff0025cc170000000000
[     6.018] (II) intel(0): 	00140103801f12780a87f594574f8c27
[     6.018] (II) intel(0): 	27505400000001010101010101010101
[     6.018] (II) intel(0): 	010101010101bc1b5684500016303020
[     6.018] (II) intel(0): 	140035ae100000180000000000202020
[     6.018] (II) intel(0): 	20202020202020202020000000fe0049
[     6.018] (II) intel(0): 	4e4c0a202020202020202020000000fe
[     6.018] (II) intel(0): 	0042543134304757303356320a200032
[     6.018] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[     6.018] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[     6.018] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[     6.018] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[     6.018] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[     6.018] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[     6.018] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[     6.018] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[     6.018] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[     6.018] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[     6.018] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[     6.018] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[     6.018] (II) intel(0): Printing probed modes for output LVDS1
[     6.018] (II) intel(0): Modeline "1366x768"x60.0   71.00  1366 1414 1446 1498  768 769 773 790 -hsync -vsync (47.4 kHz eP)
[     6.019] (II) intel(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz d)
[     6.019] (II) intel(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz d)
[     6.019] (II) intel(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz d)
[     6.019] (II) intel(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz d)
[     6.020] (II) intel(0): EDID for output VGA1
[     6.020] (II) intel(0): EDID for output HDMI1
[     6.020] (II) intel(0): EDID for output DP1
[     6.020] (II) intel(0): Output LVDS1 connected
[     6.020] (II) intel(0): Output VGA1 disconnected
[     6.020] (II) intel(0): Output HDMI1 disconnected
[     6.020] (II) intel(0): Output DP1 disconnected
[     6.020] (II) intel(0): Using exact sizes for initial modes
[     6.020] (II) intel(0): Output LVDS1 using initial mode 1366x768
[     6.020] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[     6.020] (II) intel(0): Kernel page flipping support detected, enabling
[     6.020] (==) intel(0): DPI set to (96, 96)
[     6.020] (II) Loading sub module "fb"
[     6.020] (II) LoadModule: "fb"
[     6.020] (II) Loading /usr/lib/xorg/modules/libfb.so
[     6.021] (II) Module fb: vendor="X.Org Foundation"
[     6.021] 	compiled for 1.14.2, module version = 1.0.0
[     6.021] 	ABI class: X.Org ANSI C Emulation, version 0.4
[     6.021] (II) Loading sub module "dri2"
[     6.021] (II) LoadModule: "dri2"
[     6.021] (II) Module "dri2" already built-in
[     6.021] (==) Depth 24 pixmap format is 32 bpp
[     6.022] (II) intel(0): [DRI2] Setup complete
[     6.022] (II) intel(0): [DRI2]   DRI driver: i965
[     6.022] (II) intel(0): Allocated new frame buffer 1408x768 stride 5632, tiled
[     6.023] (II) UXA(0): Driver registered support for the following operations:
[     6.023] (II)         solid
[     6.023] (II)         copy
[     6.023] (II)         composite (RENDER acceleration)
[     6.023] (II)         put_image
[     6.023] (II)         get_image
[     6.023] (==) intel(0): Backing store disabled
[     6.023] (==) intel(0): Silken mouse enabled
[     6.024] (II) intel(0): Initializing HW Cursor
[     6.024] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[     6.025] (==) intel(0): DPMS enabled
[     6.025] (==) intel(0): Intel XvMC decoder enabled
[     6.025] (II) intel(0): Set up textured video
[     6.025] (II) intel(0): [XvMC] xvmc_vld driver initialized.
[     6.025] (II) intel(0): direct rendering: DRI2 Enabled
[     6.025] (==) intel(0): hotplug detection: "enabled"
[     6.040] (--) RandR disabled
[     6.061] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[     6.061] (II) AIGLX: enabled GLX_INTEL_swap_event
[     6.061] (II) AIGLX: enabled GLX_ARB_create_context
[     6.061] (II) AIGLX: enabled GLX_ARB_create_context_profile
[     6.061] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[     6.061] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[     6.061] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[     6.061] (II) AIGLX: Loaded and initialized i965
[     6.061] (II) GLX: Initialized DRI2 GL provider for screen 0
[     6.061] (II) intel(0): Setting screen physical size to 361 x 203
[     6.099] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[     6.099] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[     6.099] (II) LoadModule: "evdev"
[     6.099] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[     6.100] (II) Module evdev: vendor="X.Org Foundation"
[     6.100] 	compiled for 1.14.0, module version = 2.8.0
[     6.100] 	Module class: X.Org XInput Driver
[     6.100] 	ABI class: X.Org XInput driver, version 19.1
[     6.100] (II) Using input driver 'evdev' for 'Power Button'
[     6.100] (**) Power Button: always reports core events
[     6.100] (**) evdev: Power Button: Device: "/dev/input/event4"
[     6.100] (--) evdev: Power Button: Vendor 0 Product 0x1
[     6.100] (--) evdev: Power Button: Found keys
[     6.100] (II) evdev: Power Button: Configuring as keyboard
[     6.100] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event4"
[     6.100] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[     6.100] (**) Option "xkb_rules" "evdev"
[     6.100] (**) Option "xkb_model" "evdev"
[     6.100] (**) Option "xkb_layout" "us"
[     6.116] (II) config/udev: Adding input device Video Bus (/dev/input/event8)
[     6.116] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[     6.116] (II) Using input driver 'evdev' for 'Video Bus'
[     6.116] (**) Video Bus: always reports core events
[     6.116] (**) evdev: Video Bus: Device: "/dev/input/event8"
[     6.116] (--) evdev: Video Bus: Vendor 0 Product 0x6
[     6.116] (--) evdev: Video Bus: Found keys
[     6.116] (II) evdev: Video Bus: Configuring as keyboard
[     6.116] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input8/event8"
[     6.116] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[     6.116] (**) Option "xkb_rules" "evdev"
[     6.116] (**) Option "xkb_model" "evdev"
[     6.116] (**) Option "xkb_layout" "us"
[     6.117] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[     6.117] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[     6.117] (II) Using input driver 'evdev' for 'Power Button'
[     6.117] (**) Power Button: always reports core events
[     6.117] (**) evdev: Power Button: Device: "/dev/input/event1"
[     6.117] (--) evdev: Power Button: Vendor 0 Product 0x1
[     6.117] (--) evdev: Power Button: Found keys
[     6.117] (II) evdev: Power Button: Configuring as keyboard
[     6.117] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0C:00/input/input1/event1"
[     6.117] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[     6.117] (**) Option "xkb_rules" "evdev"
[     6.117] (**) Option "xkb_model" "evdev"
[     6.117] (**) Option "xkb_layout" "us"
[     6.117] (II) config/udev: Adding input device Lid Switch (/dev/input/event2)
[     6.117] (II) No input driver specified, ignoring this device.
[     6.117] (II) This device may have been added with another device file.
[     6.117] (II) config/udev: Adding input device Sleep Button (/dev/input/event3)
[     6.117] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[     6.117] (II) Using input driver 'evdev' for 'Sleep Button'
[     6.117] (**) Sleep Button: always reports core events
[     6.117] (**) evdev: Sleep Button: Device: "/dev/input/event3"
[     6.117] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[     6.117] (--) evdev: Sleep Button: Found keys
[     6.117] (II) evdev: Sleep Button: Configuring as keyboard
[     6.117] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0E:00/input/input3/event3"
[     6.117] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[     6.117] (**) Option "xkb_rules" "evdev"
[     6.117] (**) Option "xkb_model" "evdev"
[     6.117] (**) Option "xkb_layout" "us"
[     6.117] (II) config/udev: Adding input device Video Bus (/dev/input/event9)
[     6.117] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[     6.117] (II) Using input driver 'evdev' for 'Video Bus'
[     6.117] (**) Video Bus: always reports core events
[     6.117] (**) evdev: Video Bus: Device: "/dev/input/event9"
[     6.118] (--) evdev: Video Bus: Vendor 0 Product 0x6
[     6.118] (--) evdev: Video Bus: Found keys
[     6.118] (II) evdev: Video Bus: Configuring as keyboard
[     6.118] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:35/LNXVIDEO:01/input/input9/event9"
[     6.118] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 10)
[     6.118] (**) Option "xkb_rules" "evdev"
[     6.118] (**) Option "xkb_model" "evdev"
[     6.118] (**) Option "xkb_layout" "us"
[     6.118] (II) config/udev: Adding drm device (/dev/dri/card0)
[     6.118] (II) config/udev: Adding input device 1.3M HD WebCam (/dev/input/event7)
[     6.118] (**) 1.3M HD WebCam: Applying InputClass "evdev keyboard catchall"
[     6.118] (II) Using input driver 'evdev' for '1.3M HD WebCam'
[     6.118] (**) 1.3M HD WebCam: always reports core events
[     6.118] (**) evdev: 1.3M HD WebCam: Device: "/dev/input/event7"
[     6.118] (--) evdev: 1.3M HD WebCam: Vendor 0x1bcf Product 0x288a
[     6.118] (--) evdev: 1.3M HD WebCam: Found keys
[     6.118] (II) evdev: 1.3M HD WebCam: Configuring as keyboard
[     6.118] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input7/event7"
[     6.118] (II) XINPUT: Adding extended input device "1.3M HD WebCam" (type: KEYBOARD, id 11)
[     6.118] (**) Option "xkb_rules" "evdev"
[     6.118] (**) Option "xkb_model" "evdev"
[     6.118] (**) Option "xkb_layout" "us"
[     6.118] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event10)
[     6.118] (II) No input driver specified, ignoring this device.
[     6.118] (II) This device may have been added with another device file.
[     6.118] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event11)
[     6.119] (II) No input driver specified, ignoring this device.
[     6.119] (II) This device may have been added with another device file.
[     6.119] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event12)
[     6.119] (II) No input driver specified, ignoring this device.
[     6.119] (II) This device may have been added with another device file.
[     6.119] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event13)
[     6.119] (II) No input driver specified, ignoring this device.
[     6.119] (II) This device may have been added with another device file.
[     6.119] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[     6.119] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[     6.119] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[     6.119] (**) AT Translated Set 2 keyboard: always reports core events
[     6.119] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[     6.119] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[     6.119] (--) evdev: AT Translated Set 2 keyboard: Found keys
[     6.119] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[     6.119] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[     6.119] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 12)
[     6.119] (**) Option "xkb_rules" "evdev"
[     6.119] (**) Option "xkb_model" "evdev"
[     6.119] (**) Option "xkb_layout" "us"
[     6.119] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event14)
[     6.119] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[     6.119] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad"
[     6.119] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[     6.119] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[     6.119] (II) LoadModule: "synaptics"
[     6.119] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[     6.120] (II) Module synaptics: vendor="X.Org Foundation"
[     6.120] 	compiled for 1.14.1, module version = 1.7.1
[     6.120] 	Module class: X.Org XInput Driver
[     6.120] 	ABI class: X.Org XInput driver, version 19.1
[     6.120] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[     6.120] (**) SynPS/2 Synaptics TouchPad: always reports core events
[     6.120] (**) Option "Device" "/dev/input/event14"
[     6.126] (II) synaptics: SynPS/2 Synaptics TouchPad: ignoring touch events for semi-multitouch device
[     6.127] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5774 (res 56)
[     6.127] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 5022 (res 105)
[     6.127] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[     6.127] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[     6.127] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
[     6.127] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[     6.127] (**) Option "EmulateTwoFingerMinZ" "0"
[     6.127] (**) Option "VertEdgeScroll" "on"
[     6.127] (**) Option "HorizEdgeScroll" "on"
[     6.127] (**) Option "VertTwoFingerScroll" "on"
[     6.127] (**) Option "HorizTwoFingerScroll" "on"
[     6.127] (**) Option "TapButton1" "1"
[     6.127] (**) Option "TapButton2" "2"
[     6.127] (**) Option "TapButton3" "3"
[     6.127] (**) Option "CircularScrolling" "on"
[     6.127] (**) Option "CircScrollTrigger" "2"
[     6.127] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[     6.127] (**) SynPS/2 Synaptics TouchPad: always reports core events
[     6.136] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input14/event14"
[     6.137] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 13)
[     6.137] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[     6.137] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75
[     6.137] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.036
[     6.137] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[     6.137] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[     6.137] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[     6.137] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[     6.137] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[     6.137] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[     6.137] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[     6.137] (II) config/udev: Adding input device Acer WMI hotkeys (/dev/input/event5)
[     6.137] (**) Acer WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[     6.137] (II) Using input driver 'evdev' for 'Acer WMI hotkeys'
[     6.137] (**) Acer WMI hotkeys: always reports core events
[     6.137] (**) evdev: Acer WMI hotkeys: Device: "/dev/input/event5"
[     6.137] (--) evdev: Acer WMI hotkeys: Vendor 0 Product 0
[     6.137] (--) evdev: Acer WMI hotkeys: Found keys
[     6.137] (II) evdev: Acer WMI hotkeys: Configuring as keyboard
[     6.137] (**) Option "config_info" "udev:/sys/devices/virtual/input/input5/event5"
[     6.137] (II) XINPUT: Adding extended input device "Acer WMI hotkeys" (type: KEYBOARD, id 14)
[     6.137] (**) Option "xkb_rules" "evdev"
[     6.137] (**) Option "xkb_model" "evdev"
[     6.137] (**) Option "xkb_layout" "us"
[     6.138] (II) config/udev: Adding input device Acer BMA150 accelerometer (/dev/input/event6)
[     6.138] (II) No input driver specified, ignoring this device.
[     6.138] (II) This device may have been added with another device file.
[     6.138] (II) config/udev: Adding input device Acer BMA150 accelerometer (/dev/input/js0)
[     6.138] (II) No input driver specified, ignoring this device.
[     6.138] (II) This device may have been added with another device file.
[    13.366] removing GPU device /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0/drm/card1 /dev/dri/card1
[    13.366] (II) config/udev: Adding drm device (/dev/dri/card1)
[    13.366] (II) xfree86: Adding drm device (/dev/dri/card1)
[    13.366] (II) LoadModule: "modesetting"
[    13.367] (WW) Warning, couldn't open module modesetting
[    13.367] (II) UnloadModule: "modesetting"
[    13.367] (II) Unloading modesetting
[    13.367] (EE) Failed to load module "modesetting" (module does not exist, 0)
[    13.367] xf86: found device 1

My Xorg.8.log:

cat /var/log/Xorg.8.log -->
[   224.364] 
X.Org X Server 1.14.2
Release Date: 2013-06-25
[   224.364] X Protocol Version 11, Revision 0
[   224.364] Build Operating System: Linux 3.9.7-1-ARCH x86_64 
[   224.364] Current Operating System: Linux ninjalappy 3.9.8-1-ARCH #1 SMP PREEMPT Thu Jun 27 21:37:31 CEST 2013 x86_64
[   224.364] Kernel command line: root=/dev/sda1 ro splash modprobe.blacklist=pcspkr pcie_aspm=force acpi_osi=Linux i915.i915_enable_rc6=1 initrd=../initramfs-linux.img BOOT_IMAGE=../vmlinuz-linux 
[   224.364] Build Date: 25 June 2013  06:53:24PM
[   224.364]  
[   224.364] Current version of pixman: 0.30.0
[   224.364] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[   224.364] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[   224.365] (==) Log file: "/var/log/Xorg.8.log", Time: Sun Jun 30 12:13:16 2013
[   224.365] (++) Using config file: "/etc/bumblebee/xorg.conf.nvidia"
[   224.365] (++) Using config directory: "/etc/bumblebee/xorg.conf.d"
[   224.365] (==) ServerLayout "Layout0"
[   224.365] (==) No screen section available. Using defaults.
[   224.365] (**) |-->Screen "Default Screen Section" (0)
[   224.365] (**) |   |-->Monitor "<default monitor>"
[   224.365] (==) No device specified for screen "Default Screen Section".
	Using the first device section listed.
[   224.365] (**) |   |-->Device "DiscreteNvidia"
[   224.365] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[   224.365] (**) Option "AutoAddDevices" "false"
[   224.365] (**) Option "AutoAddGPU" "false"
[   224.365] (**) Not automatically adding devices
[   224.365] (==) Automatically enabling devices
[   224.365] (**) Not automatically adding GPU devices
[   224.365] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[   224.365] 	Entry deleted from font path.
[   224.365] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[   224.365] 	Entry deleted from font path.
[   224.365] 	(Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[   224.365] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[   224.365] 	Entry deleted from font path.
[   224.365] 	(Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[   224.365] (==) FontPath set to:
	/usr/share/fonts/misc/,
	/usr/share/fonts/TTF/,
	/usr/share/fonts/Type1/
[   224.365] (++) ModulePath set to "/usr/lib/nvidia/xorg/,/usr/lib/xorg/modules"
[   224.365] (==) |-->Input Device "<default pointer>"
[   224.365] (==) |-->Input Device "<default keyboard>"
[   224.365] (==) The core pointer device wasn't specified explicitly in the layout.
	Using the default mouse configuration.
[   224.365] (==) The core keyboard device wasn't specified explicitly in the layout.
	Using the default keyboard configuration.
[   224.365] (II) Loader magic: 0x7fdc20
[   224.365] (II) Module ABI versions:
[   224.365] 	X.Org ANSI C Emulation: 0.4
[   224.365] 	X.Org Video Driver: 14.1
[   224.365] 	X.Org XInput driver : 19.1
[   224.365] 	X.Org Server Extension : 7.0
[   224.366] (II) xfree86: Adding drm device (/dev/dri/card1)
[   224.366] (II) xfree86: Adding drm device (/dev/dri/card0)
[   224.366] setversion 1.4 failed
[   224.368] (--) PCI:*(0:1:0:0) 10de:0df4:1025:0550 rev 161, Mem @ 0xd0000000/16777216, 0xa0000000/268435456, 0xb0000000/33554432, I/O @ 0x00003000/128, BIOS @ 0x????????/524288
[   224.368] Initializing built-in extension Generic Event Extension
[   224.368] Initializing built-in extension SHAPE
[   224.368] Initializing built-in extension MIT-SHM
[   224.368] Initializing built-in extension XInputExtension
[   224.368] Initializing built-in extension XTEST
[   224.368] Initializing built-in extension BIG-REQUESTS
[   224.368] Initializing built-in extension SYNC
[   224.368] Initializing built-in extension XKEYBOARD
[   224.368] Initializing built-in extension XC-MISC
[   224.368] Initializing built-in extension SECURITY
[   224.368] Initializing built-in extension XINERAMA
[   224.368] Initializing built-in extension XFIXES
[   224.368] Initializing built-in extension RENDER
[   224.368] Initializing built-in extension RANDR
[   224.368] Initializing built-in extension COMPOSITE
[   224.368] Initializing built-in extension DAMAGE
[   224.368] Initializing built-in extension MIT-SCREEN-SAVER
[   224.368] Initializing built-in extension DOUBLE-BUFFER
[   224.368] Initializing built-in extension RECORD
[   224.368] Initializing built-in extension DPMS
[   224.368] Initializing built-in extension X-Resource
[   224.368] Initializing built-in extension XVideo
[   224.368] Initializing built-in extension XVideo-MotionCompensation
[   224.368] Initializing built-in extension XFree86-VidModeExtension
[   224.368] Initializing built-in extension XFree86-DGA
[   224.368] Initializing built-in extension XFree86-DRI
[   224.368] Initializing built-in extension DRI2
[   224.368] (II) LoadModule: "glx"
[   224.368] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[   224.369] (II) Module glx: vendor="X.Org Foundation"
[   224.369] 	compiled for 1.14.2, module version = 1.0.0
[   224.369] 	ABI class: X.Org Server Extension, version 7.0
[   224.369] (==) AIGLX enabled
[   224.369] Loading extension GLX
[   224.369] (II) LoadModule: "nvidia"
[   224.369] (WW) Warning, couldn't open module nvidia
[   224.369] (II) UnloadModule: "nvidia"
[   224.369] (II) Unloading nvidia
[   224.369] (EE) Failed to load module "nvidia" (module does not exist, 0)
[   224.369] (II) LoadModule: "mouse"
[   224.369] (II) Loading /usr/lib/xorg/modules/input/mouse_drv.so
[   224.369] (II) Module mouse: vendor="X.Org Foundation"
[   224.369] 	compiled for 1.14.0, module version = 1.9.0
[   224.369] 	Module class: X.Org XInput Driver
[   224.369] 	ABI class: X.Org XInput driver, version 19.1
[   224.369] (II) LoadModule: "kbd"
[   224.369] (WW) Warning, couldn't open module kbd
[   224.369] (II) UnloadModule: "kbd"
[   224.369] (II) Unloading kbd
[   224.370] (EE) Failed to load module "kbd" (module does not exist, 0)
[   224.370] (EE) No drivers available.
[   224.370] (EE) 
Fatal server error:
[   224.370] (EE) no screens found(EE) 
[   224.370] (EE) 
Please consult the The X.Org Foundation support 
	 at http://wiki.x.org
 for help. 
[   224.370] (EE) Please also check the log file at "/var/log/Xorg.8.log" for additional information.
[   224.370] (EE)

lspci output:

lspci -k | grep -A 2 -i VGA -->
00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09)
	Subsystem: Acer Incorporated [ALI] Device 054f
	Kernel driver in use: i915
--
01:00.0 VGA compatible controller: NVIDIA Corporation GF108M [GeForce GT 540M] (rev a1)
	Subsystem: Acer Incorporated [ALI] Device 0550
	Kernel driver in use: nvidia

lsmod output:

lsmod | grep nvidia -->
nvidia               9388021  0 
drm                   230077  4 i915,drm_kms_helper,nvidia
i2c_core               22479  7 drm,i915,i2c_i801,drm_kms_helper,i2c_algo_bit,nvidia,videodev

I have no /etc/X11/xorg.conf, but I do have /etc/X11/xorg.conf.d/20-intel.conf:

Section "Device"
        Identifier      "Device1"
        Driver          "intel"
        VendorName      "Intel"
        BusID           "PCI:0:2:0"
EndSection

and /etc/X11/xorg.conf.d/20-nvidia.conf:

Section "Device"
        Identifier      "Device0"
        Driver          "nvidia"
        VendorName      "NVIDIA Corporation"
        BusID           "PCI:1:0:0"
EndSection

Installed packages that are relevant:

pacman -Q |grep intel -->                                                                   
intel-dri 9.1.3-2
xf86-video-intel 2.21.10-3

pacman -Q |grep nvidia -->
lib32-nvidia-utils 319.32-1
nvidia 319.32-2
opencl-nvidia 319.32-1
 loaded

(These packages were installed according to the bumblebee wiki)

Any help would be nice, thank you!

Last edited by deca (2013-11-30 11:32:03)

Hi there.

Offline

#2 2013-07-02 05:30:22

deca
Member
From: CA, USA
Registered: 2012-11-17
Posts: 5

Re: [SOLVED] Bumblee + Intel/NVIDIA: Failed to load module "nvidia"

Ok, optirun seems to be functioning correctly now.

After reading some other boards it seems that some emphasis was being placed on the LibraryPath and XorgModulePath lines of /etc/bumblebee/bumblebee.conf. I was ls'ing through the directories and noticed the following:

%ls /usr/lib/xorg/modules/drivers
intel_drv.so*

Why was the intel driver the only driver in this folder? I am not sure. '#modprobe nvidia' never complained (at least I didn't see it complain).

Well, I reinstalled the nvidia package with pacman and lo' and behold:

%ls /usr/lib/xorg/modules/drivers 
intel_drv.so*  nvidia_drv.so*

The nvidia_drv.so* decided to show up. I quickly jumped onto optirun and discovered that it was functioning.

I am not sure how this happened, but I'm marking the thread as solved.

Oh, I almost forgot. I performed two steps before trying the above which together did not fix the problem, but they may have had an influence:

  1. Removed (backed up first) both /etc/X11/xorg.conf.d/{20-intel.conf,20-nvidia.conf}

  2. Blacklisted nvidia

If you looked at this to help, thank you. If you're looking at this for help, good luck! big_smile

Hi there.

Offline

Pages: 1

Board footer

Powered by FluxBB