[Closed] No Video Hardware acceleration / Ati vid / Cinnamon /

the dude · 2013-08-16 04:42:59

Howdy,

EDIT: See post 9 for logs

I HAVE done LOTS of searching, but when you dont know the lingo it makes it hard.

I'm running Arch Linux on the IBM T 30

I'm a Linux noob who could use some help please.. It runs really slow,
I think i need to turn on the hardware acceleration for the video card.

I know NOTHING about linux .. could you help me out please

I could do with some hand holding to get it running right, I have
looked into turning things on in the kernel but i cant find out how to
do it. Or what to turn on

vid card : ATI Mobility Radeon 7500

EDIT: See post 9 for logs

Regards

Mark

Last edited by the dude (2013-08-17 17:34:37)

HalosGhost · 2013-08-16 04:45:39

Please change your thread title to something more helpful
What graphics driver do you have installed

All the best,

-HG

the dude · 2013-08-16 04:47:22

Thanks : updated .. also i said in my first post the card is a vid card : ATI Mobility Radeon 7500
cheers

HalosGhost · 2013-08-16 04:48:04

the dude wrote:

Thanks : updated .. also i said in my first post the card is a vid card : ATI Mobility Radeon 7500
cheers

I didn't ask what card you had. I asked what driver you had.

All the best,

-HG

the dude · 2013-08-16 04:48:58

Oh shit.. sorry misread ... xf86-video-ati

HalosGhost · 2013-08-16 04:52:46

the dude wrote:

Oh shit.. sorry misread ... xf86-video-ati

Have you installed the relevant dri package? What feels slow? If you're on an x64 rig, do you have the relevant lib32 packages if you need them?

Please take a moment to read this.

All the best,

-HG

the dude · 2013-08-16 04:56:43

Relevant dri package, would be the xf86-video-ati ? in a console it's fine, but when i boot into cinnamon it states that it's currently running without "video hardware acceleration" so the desktop is really slow, opens everything slow .. and it's a 32 bit rig .

sorry i'l Quote everything now on reply, as that seems to be the thing to do ..

I appreciate the help. but you need to keep in mind this is my first linux install, so i know nothing about linux, but i'm trying hard to learn :-)

Last edited by the dude (2013-08-16 05:02:17)

Trilby · 2013-08-16 11:36:17

The dude, I don't know much about video drivers, but have you read this? You do have mesa and libvdpau installed, right? They are (indeirect) dependencies of xf86-video-ati, so they should be installed, but it's still worth checking.

On a side note, you'll likely find that these forums are very supportive of people who want to learn, regardless of what their current state of linux knowledge is. But - while it may see odd/counter-intuitive at first - most people here can really do without all the sugar coating. Courtesy is always good, and a please and thank you can go a long way - however, it will only end up irritating many readers to have to wade through a bowl full of sugar just to find the information they need to help you, or the question that you are asking.

All the "please help"s are unneeded. Anyone reading this thread is reading so they can try to help - high information-density posts will help them do that.

As an example - I was initially wondering why you suspected this was a hardware accelleration issue. A clear and objective description of symptoms is a treasured resource on support forums. The Cinnammon error message is useful - but could you get the word-for-word version of it please? Also check your xorg logs. How to do so will depend on how you start X, do you use a login manager (like gdm) or do you use xinit/startx manually?

Last edited by Trilby (2013-08-16 11:39:26)

the dude · 2013-08-16 14:15:50

Trilby wrote:

The dude, I don't know much about video drivers, but have you read this? You do have mesa and libvdpau installed, right? They are (indeirect) dependencies of xf86-video-ati, so they should be installed, but it's still worth checking.
On a side note, you'll likely find that these forums are very supportive of people who want to learn, regardless of what their current state of linux knowledge is. But - while it may see odd/counter-intuitive at first - most people here can really do without all the sugar coating. Courtesy is always good, and a please and thank you can go a long way - however, it will only end up irritating many readers to have to wade through a bowl full of sugar just to find the information they need to help you, or the question that you are asking.
All the "please help"s are unneeded. Anyone reading this thread is reading so they can try to help - high information-density posts will help them do that.
As an example - I was initially wondering why you suspected this was a hardware accelleration issue. A clear and objective description of symptoms is a treasured resource on support forums. The Cinnammon error message is useful - but could you get the word-for-word version of it please? Also check your xorg logs. How to do so will depend on how you start X, do you use a login manager (like gdm) or do you use xinit/startx manually?

mesa , libvdpau , xf86-video-ati are all installed.

The Cinnamon error message:

Cinnamon is currently running without video hardware acceleration and as a result, you may observe much higher than normal CPU usage.
There could be a problem with your drivers or some other issue. For the best experience, it is recommended that you only use this mode for troubleshooting purposes.

For loggin in ATM, boot into shell and log in with lxdm
"/usr/sbin/lxdm" then user and pass to bring up Cinnamon

xorg.log it's big, sorry dont know what part of it you might need.

[root@fuck ~]# cat /var/log/Xorg.0.log
[    91.246] 
X.Org X Server 1.14.2
Release Date: 2013-06-25
[    91.246] X Protocol Version 11, Revision 0
[    91.246] Build Operating System: Linux 3.9.7-1-ARCH i686 
[    91.246] Current Operating System: Linux fuck 3.10.6-2-ARCH #1 SMP PREEMPT Tue Aug 13 10:20:52 CEST 2013 i686
[    91.246] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=3b281876-2f49-4f73-8303-8143a6560c82 rw quiet
[    91.246] Build Date: 01 July 2013  10:52:25AM
[    91.246]  
[    91.246] Current version of pixman: 0.30.2
[    91.246] 	Before reporting problems, check [url]http://wiki.x.org[/url]
	to make sure that you have the latest version.
[    91.246] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    91.247] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Aug 16 23:49:18 2013
[    91.311] (==) Using config directory: "/etc/X11/xorg.conf.d"
[    91.311] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    91.367] (==) No Layout section.  Using the first Screen section.
[    91.367] (==) No screen section available. Using defaults.
[    91.367] (**) |-->Screen "Default Screen Section" (0)
[    91.367] (**) |   |-->Monitor "<default monitor>"
[    91.391] (==) No device specified for screen "Default Screen Section".
	Using the first device section listed.
[    91.391] (**) |   |-->Device "Radeon"
[    91.391] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[    91.391] (==) Automatically adding devices
[    91.391] (==) Automatically enabling devices
[    91.391] (==) Automatically adding GPU devices
[    91.433] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[    91.433] 	Entry deleted from font path.
[    91.469] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[    91.469] 	Entry deleted from font path.
[    91.469] 	(Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[    91.469] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[    91.469] 	Entry deleted from font path.
[    91.470] 	(Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[    91.470] (==) FontPath set to:
	/usr/share/fonts/misc/,
	/usr/share/fonts/TTF/,
	/usr/share/fonts/Type1/
[    91.470] (==) ModulePath set to "/usr/lib/xorg/modules"
[    91.470] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[    91.470] (II) Loader magic: 0x8258620
[    91.470] (II) Module ABI versions:
[    91.470] 	X.Org ANSI C Emulation: 0.4
[    91.470] 	X.Org Video Driver: 14.1
[    91.470] 	X.Org XInput driver : 19.1
[    91.470] 	X.Org Server Extension : 7.0
[    91.471] (II) xfree86: Adding drm device (/dev/dri/card0)
[    91.475] (--) PCI:*(0:1:0:0) 1002:4c57:1014:0517 rev 0, Mem @ 0xe8000000/134217728, 0xd0100000/65536, I/O @ 0x00003000/256, BIOS @ 0x????????/131072
[    91.476] Initializing built-in extension Generic Event Extension
[    91.476] Initializing built-in extension SHAPE
[    91.476] Initializing built-in extension MIT-SHM
[    91.476] Initializing built-in extension XInputExtension
[    91.476] Initializing built-in extension XTEST
[    91.476] Initializing built-in extension BIG-REQUESTS
[    91.476] Initializing built-in extension SYNC
[    91.476] Initializing built-in extension XKEYBOARD
[    91.476] Initializing built-in extension XC-MISC
[    91.476] Initializing built-in extension SECURITY
[    91.476] Initializing built-in extension XINERAMA
[    91.476] Initializing built-in extension XFIXES
[    91.476] Initializing built-in extension RENDER
[    91.476] Initializing built-in extension RANDR
[    91.476] Initializing built-in extension COMPOSITE
[    91.476] Initializing built-in extension DAMAGE
[    91.477] Initializing built-in extension MIT-SCREEN-SAVER
[    91.477] Initializing built-in extension DOUBLE-BUFFER
[    91.477] Initializing built-in extension RECORD
[    91.477] Initializing built-in extension DPMS
[    91.477] Initializing built-in extension X-Resource
[    91.477] Initializing built-in extension XVideo
[    91.477] Initializing built-in extension XVideo-MotionCompensation
[    91.477] Initializing built-in extension XFree86-VidModeExtension
[    91.477] Initializing built-in extension XFree86-DGA
[    91.477] Initializing built-in extension XFree86-DRI
[    91.477] Initializing built-in extension DRI2
[    91.477] (II) "glx" will be loaded by default.
[    91.477] (II) LoadModule: "dri2"
[    91.477] (II) Module "dri2" already built-in
[    91.477] (II) LoadModule: "glamoregl"
[    91.495] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[    91.776] (II) Module glamoregl: vendor="X.Org Foundation"
[    91.777] 	compiled for 1.14.0, module version = 0.5.0
[    91.777] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    91.777] (II) LoadModule: "glx"
[    91.778] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    91.819] (II) Module glx: vendor="X.Org Foundation"
[    91.819] 	compiled for 1.14.2, module version = 1.0.0
[    91.819] 	ABI class: X.Org Server Extension, version 7.0
[    91.819] (==) AIGLX enabled
[    91.820] Loading extension GLX
[    91.820] (II) LoadModule: "radeon"
[    91.858] (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
[    91.902] (II) Module radeon: vendor="X.Org Foundation"
[    91.902] 	compiled for 1.14.2, module version = 7.2.0
[    91.902] 	Module class: X.Org Video Driver
[    91.902] 	ABI class: X.Org Video Driver, version 14.1
[    91.902] (II) RADEON: Driver for ATI Radeon chipsets:
	ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI FireMV 2400 (PCI),
	ATI Radeon Mobility X300 (M24) 3152 (PCIE),
	ATI FireGL M24 GL 3154 (PCIE), ATI FireMV 2400 3155 (PCI),
	ATI Radeon X600 (RV380) 3E50 (PCIE),
	ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136,
	ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP),
	ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
	ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP),
	ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
	ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP),
	ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
	ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650,
	ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237,
	ATI Radeon 8500 AIW BB (AGP), ATI Radeon IGP320M (U1) 4336,
	ATI Radeon IGP330M/340M/350M (U2) 4337,
	ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI),
	ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP),
	ATI Radeon X800PRO (R420) JI (AGP),
	ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
	ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
	ATI Radeon Mobility 9800 (M18) JN (AGP),
	ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP),
	ATI Radeon X800 VE (R420) JT (AGP), ATI Radeon X850 (R480) (AGP),
	ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
	ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP),
	ATI Radeon Mobility M7 LW (AGP),
	ATI Mobility FireGL 7800 M7 LX (AGP),
	ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
	ATI FireGL Mobility 9000 (M9) Ld (AGP),
	ATI Radeon Mobility 9000 (M9) Lf (AGP),
	ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI FireMV 2400 PCI,
	ATI Radeon 9700 Pro ND (AGP), ATI Radeon 9700/9500Pro NE (AGP),
	ATI Radeon 9600TX NF (AGP), ATI FireGL X1 NG (AGP),
	ATI Radeon 9800PRO NH (AGP), ATI Radeon 9800 NI (AGP),
	ATI FireGL X2 NK (AGP), ATI Radeon 9800XT NJ (AGP),
	ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
	ATI Radeon Mobility 9600 (M10) NQ (AGP),
	ATI Radeon Mobility 9600 (M11) NR (AGP),
	ATI Radeon Mobility 9600 (M10) NS (AGP),
	ATI FireGL Mobility T2 (M10) NT (AGP),
	ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP),
	ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
	ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
	ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI),
	ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI),
	ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI),
	ATI Radeon Mobility X300 (M22) 5460 (PCIE),
	ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
	ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE),
	ATI Radeon X800PRO (R423) UI (PCIE),
	ATI Radeon X800LE (R423) UJ (PCIE),
	ATI Radeon X800SE (R423) UK (PCIE),
	ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
	ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE),
	ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE),
	ATI FireGL unknown (R423) UR (PCIE),
	ATI FireGL unknown (R423) UT (PCIE),
	ATI Mobility FireGL V5000 (M26) (PCIE),
	ATI Mobility FireGL V5000 (M26) (PCIE),
	ATI Mobility Radeon X700 XL (M26) (PCIE),
	ATI Mobility Radeon X700 (M26) (PCIE),
	ATI Mobility Radeon X700 (M26) (PCIE),
	ATI Radeon X550XTX 5657 (PCIE), ATI Radeon 9100 IGP (A5) 5834,
	ATI Radeon Mobility 9100 IGP (U3) 5835,
	ATI Radeon XPRESS 200 5954 (PCIE),
	ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP),
	ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
	ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
	ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE),
	ATI Radeon XPRESS 200M 5975 (PCIE),
	ATI Radeon XPRESS 200 5A41 (PCIE),
	ATI Radeon XPRESS 200M 5A42 (PCIE),
	ATI Radeon XPRESS 200 5A61 (PCIE),
	ATI Radeon XPRESS 200M 5A62 (PCIE),
	ATI Radeon X300 (RV370) 5B60 (PCIE),
	ATI Radeon X600 (RV370) 5B62 (PCIE),
	ATI Radeon X550 (RV370) 5B63 (PCIE),
	ATI FireGL V3100 (RV370) 5B64 (PCIE),
	ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
	ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
	ATI Radeon Mobility 9200 (M9+) 5C63 (AGP),
	ATI Mobility Radeon X800 XT (M28) (PCIE),
	ATI Mobility FireGL V5100 (M28) (PCIE),
	ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE),
	ATI Radeon X850 XT PE (R480) (PCIE),
	ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
	ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
	ATI Radeon X850 XT (R480) (PCIE),
	ATI Radeon X800XT (R423) 5D57 (PCIE),
	ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE),
	ATI Radeon X700 PRO (RV410) (PCIE),
	ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
	ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800,
	ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800,
	ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300,
	ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800,
	ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800,
	ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
	ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
	ATI Mobility Radeon X1400, ATI Radeon X1300/X1550,
	ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300,
	ATI Mobility Radeon X1300, ATI Mobility Radeon X1300,
	ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300,
	ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350,
	ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550,
	ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450,
	ATI Radeon X1300/X1550, ATI Mobility Radeon X2300,
	ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
	ATI Mobility Radeon X1350, ATI Mobility Radeon X1450,
	ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350,
	ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600,
	ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600,
	ATI Mobility FireGL V5200, ATI Mobility Radeon X1600,
	ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600,
	ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400,
	ATI Mobility FireGL V5250, ATI Mobility Radeon X1700,
	ATI Mobility Radeon X1700 XT, ATI FireGL V5200,
	ATI Mobility Radeon X1700, ATI Radeon X2300HD,
	ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300,
	ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950,
	ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
	ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
	ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
	ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950,
	ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560,
	ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI FireGL V7400,
	ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560,
	ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835,
	ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200,
	ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740,
	ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT,
	ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT,
	ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600,
	ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
	ATI Radeon 4800 Series, ATI Radeon HD 4850 x2,
	ATI FirePro V8750 (FireGL), ATI FirePro V7760 (FireGL),
	ATI Mobility RADEON HD 4850, ATI Mobility RADEON HD 4850 X2,
	ATI Radeon 4800 Series, ATI FirePro RV770, AMD FireStream 9270,
	AMD FireStream 9250, ATI FirePro V8700 (FireGL),
	ATI Mobility RADEON HD 4870, ATI Mobility RADEON M98,
	ATI Mobility RADEON HD 4870, ATI Radeon 4800 Series,
	ATI Radeon 4800 Series, ATI FirePro M7750, ATI M98, ATI M98, ATI M98,
	ATI Mobility Radeon HD 4650, ATI Radeon RV730 (AGP),
	ATI Mobility Radeon HD 4670, ATI FirePro M5750,
	ATI Mobility Radeon HD 4670, ATI Radeon RV730 (AGP),
	ATI RV730XT [Radeon HD 4670], ATI RADEON E4600,
	ATI Radeon HD 4600 Series, ATI RV730 PRO [Radeon HD 4650],
	ATI FirePro V7750 (FireGL), ATI FirePro V5700 (FireGL),
	ATI FirePro V3750 (FireGL), ATI Mobility Radeon HD 4830,
	ATI Mobility Radeon HD 4850, ATI FirePro M7740, ATI RV740,
	ATI Radeon HD 4770, ATI Radeon HD 4700 Series, ATI Radeon HD 4770,
	ATI FirePro M5750, ATI RV610, ATI Radeon HD 2400 XT,
	ATI Radeon HD 2400 Pro, ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000,
	ATI RV610, ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT,
	ATI Mobility Radeon HD 2400, ATI RADEON E2400, ATI RV610,
	ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,
	ATI Mobility Radeon HD 3850, ATI Radeon HD3850,
	ATI Mobility Radeon HD 3850 X2, ATI RV670,
	ATI Mobility Radeon HD 3870, ATI Mobility Radeon HD 3870 X2,
	ATI Radeon HD3870 X2, ATI FireGL V7700, ATI Radeon HD3850,
	ATI Radeon HD3690, AMD Firestream 9170, ATI Radeon HD 4550,
	ATI Radeon RV710, ATI Radeon RV710, ATI Radeon RV710,
	ATI Radeon HD 4350, ATI Mobility Radeon 4300 Series,
	ATI Mobility Radeon 4500 Series, ATI Mobility Radeon 4500 Series,
	ATI FirePro RG220, ATI Mobility Radeon 4330, ATI RV630,
	ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
	ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
	ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
	ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
	ATI FireGL V3600, ATI Radeon HD 2600 LE,
	ATI Mobility FireGL Graphics Processor, ATI Radeon HD 3470,
	ATI Mobility Radeon HD 3430, ATI Mobility Radeon HD 3400 Series,
	ATI Radeon HD 3450, ATI Radeon HD 3450, ATI Radeon HD 3430,
	ATI Radeon HD 3450, ATI FirePro V3700, ATI FireMV 2450,
	ATI FireMV 2260, ATI FireMV 2260, ATI Radeon HD 3600 Series,
	ATI Radeon HD 3650 AGP, ATI Radeon HD 3600 PRO,
	ATI Radeon HD 3600 XT, ATI Radeon HD 3600 PRO,
	ATI Mobility Radeon HD 3650, ATI Mobility Radeon HD 3670,
	ATI Mobility FireGL V5700, ATI Mobility FireGL V5725,
	ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
	ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
	ATI Radeon HD 3300 Graphics, ATI Radeon HD 3200 Graphics,
	ATI Radeon 3000 Graphics, SUMO, SUMO, SUMO2, SUMO2, SUMO2, SUMO2,
	SUMO, SUMO, SUMO, SUMO, SUMO, SUMO, SUMO, SUMO, ATI Radeon HD 4200,
	ATI Radeon 4100, ATI Mobility Radeon HD 4200,
	ATI Mobility Radeon 4100, ATI Radeon HD 4290, ATI Radeon HD 4250,
	AMD Radeon HD 6310 Graphics, AMD Radeon HD 6310 Graphics,
	AMD Radeon HD 6250 Graphics, AMD Radeon HD 6250 Graphics,
	AMD Radeon HD 6300 Series Graphics,
	AMD Radeon HD 6200 Series Graphics, PALM, PALM, PALM, CYPRESS,
	ATI FirePro (FireGL) Graphics Adapter,
	ATI FirePro (FireGL) Graphics Adapter,
	ATI FirePro (FireGL) Graphics Adapter, AMD Firestream 9370,
	AMD Firestream 9350, ATI Radeon HD 5800 Series,
	ATI Radeon HD 5800 Series, ATI Radeon HD 5800 Series,
	ATI Radeon HD 5800 Series, ATI Radeon HD 5900 Series,
	ATI Radeon HD 5900 Series, ATI Mobility Radeon HD 5800 Series,
	ATI Mobility Radeon HD 5800 Series,
	ATI FirePro (FireGL) Graphics Adapter,
	ATI FirePro (FireGL) Graphics Adapter,
	ATI Mobility Radeon HD 5800 Series, ATI Radeon HD 5700 Series,
	ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
	ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
	ATI Mobility Radeon HD 5000 Series,
	ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon HD 5570,
	ATI FirePro (FireGL) Graphics Adapter,
	ATI FirePro (FireGL) Graphics Adapter, ATI Radeon HD 5670,
	ATI Radeon HD 5570, ATI Radeon HD 5500 Series, REDWOOD,
	ATI Mobility Radeon HD 5000 Series,
	ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon Graphics,
	ATI Mobility Radeon Graphics, CEDAR,
	ATI FirePro (FireGL) Graphics Adapter,
	ATI FirePro (FireGL) Graphics Adapter, ATI FirePro 2270, CEDAR,
	ATI Radeon HD 5450, CEDAR, CEDAR, CAYMAN, CAYMAN, CAYMAN, CAYMAN,
	CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN,
	AMD Radeon HD 6900 Series, AMD Radeon HD 6900 Series, CAYMAN, CAYMAN,
	CAYMAN, AMD Radeon HD 6900M Series, Mobility Radeon HD 6000 Series,
	BARTS, BARTS, Mobility Radeon HD 6000 Series,
	Mobility Radeon HD 6000 Series, BARTS, BARTS, BARTS, BARTS,
	AMD Radeon HD 6800 Series, AMD Radeon HD 6800 Series,
	AMD Radeon HD 6700 Series, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
	TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
	TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
	CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS,
	CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, ARUBA, ARUBA,
	ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA,
	ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA,
	ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA,
	ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, TAHITI, TAHITI, TAHITI, TAHITI,
	TAHITI, TAHITI, TAHITI, TAHITI, TAHITI, TAHITI, TAHITI, TAHITI,
	TAHITI, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN,
	PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN,
	VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE,
	VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE,
	VERDE, VERDE, VERDE, OLAND, OLAND, OLAND, OLAND, OLAND, OLAND, OLAND,
	OLAND, OLAND, OLAND, OLAND, OLAND, OLAND, HAINAN, HAINAN, HAINAN,
	HAINAN, HAINAN, HAINAN, BONAIRE, BONAIRE, BONAIRE, BONAIRE, BONAIRE,
	BONAIRE, BONAIRE, BONAIRE, KABINI, KABINI, KABINI, KABINI, KABINI,
	KABINI, KABINI, KABINI, KABINI, KABINI, KABINI, KABINI, KABINI,
	KABINI, KABINI, KABINI
[    91.922] (++) using VT number 7

[    91.951] (II) [KMS] Kernel modesetting enabled.
[    91.952] (II) RADEON(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[    91.952] (==) RADEON(0): Depth 24, (--) framebuffer bpp 32
[    91.952] (II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[    91.952] (==) RADEON(0): Default visual is TrueColor
[    91.952] (==) RADEON(0): RGB weight 888
[    91.952] (II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
[    91.952] (--) RADEON(0): Chipset: "ATI Radeon Mobility M7 LW (AGP)" (ChipID = 0x4c57)
[    91.952] (II) Loading sub module "dri2"
[    91.952] (II) LoadModule: "dri2"
[    91.952] (II) Module "dri2" already built-in
[    91.952] (II) Loading sub module "exa"
[    91.952] (II) LoadModule: "exa"
[    91.953] (II) Loading /usr/lib/xorg/modules/libexa.so
[    91.963] (II) Module exa: vendor="X.Org Foundation"
[    91.963] 	compiled for 1.14.2, module version = 2.6.0
[    91.963] 	ABI class: X.Org Video Driver, version 14.1
[    91.963] (II) RADEON(0): KMS Color Tiling: disabled
[    91.963] (II) RADEON(0): KMS Color Tiling 2D: disabled
[    91.963] (II) RADEON(0): KMS Pageflipping: enabled
[    91.964] (II) RADEON(0): SwapBuffers wait for vsync: enabled
[    91.970] (II) RADEON(0): Output VGA-0 has no monitor section
[    91.973] (II) RADEON(0): Output DVI-0 has no monitor section
[    91.973] (II) RADEON(0): Output LVDS has no monitor section
[    91.979] (II) RADEON(0): Output S-video has no monitor section
[    91.985] (II) RADEON(0): EDID for output VGA-0
[    91.988] (II) RADEON(0): EDID for output DVI-0
[    91.988] (II) RADEON(0): EDID for output LVDS
[    91.988] (II) RADEON(0): Printing probed modes for output LVDS
[    91.988] (II) RADEON(0): Modeline "1024x768"x60.0   65.00  1024 1040 1176 1344  768 770 776 806 (48.4 kHz eP)
[    91.988] (II) RADEON(0): Modeline "800x600"x59.9   38.25  800 832 912 1024  600 603 607 624 -hsync +vsync (37.4 kHz)
[    91.988] (II) RADEON(0): Modeline "848x480"x59.7   31.50  848 872 952 1056  480 483 493 500 -hsync +vsync (29.8 kHz)
[    91.988] (II) RADEON(0): Modeline "720x480"x59.7   26.75  720 744 808 896  480 483 493 500 -hsync +vsync (29.9 kHz)
[    91.988] (II) RADEON(0): Modeline "640x480"x59.4   23.75  640 664 720 800  480 483 487 500 -hsync +vsync (29.7 kHz)
[    91.994] (II) RADEON(0): EDID for output S-video
[    91.994] (II) RADEON(0): Output VGA-0 disconnected
[    91.994] (II) RADEON(0): Output DVI-0 disconnected
[    91.994] (II) RADEON(0): Output LVDS connected
[    91.994] (II) RADEON(0): Output S-video disconnected
[    91.995] (II) RADEON(0): Using exact sizes for initial modes
[    91.995] (II) RADEON(0): Output LVDS using initial mode 1024x768
[    91.995] (II) RADEON(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[    91.995] (II) RADEON(0): mem size init: gart size :3dff000 vram size: s:1000000 visible:f00000
[    91.995] (II) RADEON(0): EXA: Driver will not allow EXA pixmaps in VRAM
[    91.995] (==) RADEON(0): DPI set to (96, 96)
[    91.995] (II) Loading sub module "fb"
[    91.995] (II) LoadModule: "fb"
[    91.995] (II) Loading /usr/lib/xorg/modules/libfb.so
[    92.012] (II) Module fb: vendor="X.Org Foundation"
[    92.012] 	compiled for 1.14.2, module version = 1.0.0
[    92.012] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    92.012] (II) Loading sub module "ramdac"
[    92.012] (II) LoadModule: "ramdac"
[    92.013] (II) Module "ramdac" already built-in
[    92.013] (--) Depth 24 pixmap format is 32 bpp
[    92.020] (II) RADEON(0): [DRI2] Setup complete
[    92.020] (II) RADEON(0): [DRI2]   DRI driver: radeon
[    92.020] (II) RADEON(0): [DRI2]   VDPAU driver: radeon
[    92.021] (II) RADEON(0): Front buffer size: 3072K
[    92.021] (II) RADEON(0): VRAM usage limit set to 11030K
[    92.023] (==) RADEON(0): Backing store disabled
[    92.023] (II) RADEON(0): Direct rendering enabled
[    92.023] (II) RADEON(0): Render acceleration enabled for R100 type cards.
[    92.023] (**) RADEON(0): Option "MigrationHeuristic" "greedy"
[    92.023] (II) EXA(0): Driver allocated offscreen pixmaps
[    92.023] (II) EXA(0): Driver registered support for the following operations:
[    92.023] (II)         Solid
[    92.023] (II)         Copy
[    92.023] (II)         Composite (RENDER acceleration)
[    92.023] (II)         UploadToScreen
[    92.024] (II)         DownloadFromScreen
[    92.024] (II) RADEON(0): Acceleration enabled
[    92.024] (==) RADEON(0): DPMS enabled
[    92.024] (==) RADEON(0): Silken mouse enabled
[    92.024] (II) RADEON(0): Set up textured video
[    92.024] (II) RADEON(0): [XvMC] Associated with Radeon Textured Video.
[    92.024] (II) RADEON(0): [XvMC] Extension initialized.
[    92.024] (II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[    92.026] (--) RandR disabled
[    92.346] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[    92.346] (II) AIGLX: enabled GLX_INTEL_swap_event
[    92.346] (II) AIGLX: enabled GLX_ARB_create_context
[    92.346] (II) AIGLX: enabled GLX_ARB_create_context_profile
[    92.346] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[    92.346] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[    92.346] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[    92.347] (II) AIGLX: Loaded and initialized radeon
[    92.347] (II) GLX: Initialized DRI2 GL provider for screen 0
[    92.402] (II) RADEON(0): Setting screen physical size to 270 x 203
[    92.905] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[    92.905] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    92.905] (II) LoadModule: "evdev"
[    92.905] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    92.908] (II) Module evdev: vendor="X.Org Foundation"
[    92.908] 	compiled for 1.14.2, module version = 2.8.1
[    92.908] 	Module class: X.Org XInput Driver
[    92.908] 	ABI class: X.Org XInput driver, version 19.1
[    92.908] (II) Using input driver 'evdev' for 'Power Button'
[    92.908] (**) Power Button: always reports core events
[    92.909] (**) evdev: Power Button: Device: "/dev/input/event3"
[    92.909] (--) evdev: Power Button: Vendor 0 Product 0x1
[    92.909] (--) evdev: Power Button: Found keys
[    92.909] (II) evdev: Power Button: Configuring as keyboard
[    92.909] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[    92.909] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    92.909] (**) Option "xkb_rules" "evdev"
[    92.909] (**) Option "xkb_model" "pc104"
[    92.909] (**) Option "xkb_layout" "us"
[    92.997] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
[    92.997] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    92.997] (II) Using input driver 'evdev' for 'Video Bus'
[    92.998] (**) Video Bus: always reports core events
[    92.998] (**) evdev: Video Bus: Device: "/dev/input/event4"
[    92.998] (--) evdev: Video Bus: Vendor 0 Product 0x6
[    92.998] (--) evdev: Video Bus: Found keys
[    92.998] (II) evdev: Video Bus: Configuring as keyboard
[    92.998] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A03:00/device:03/LNXVIDEO:00/input/input4/event4"
[    92.998] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[    92.998] (**) Option "xkb_rules" "evdev"
[    92.998] (**) Option "xkb_model" "pc104"
[    92.998] (**) Option "xkb_layout" "us"
[    93.000] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[    93.000] (II) No input driver specified, ignoring this device.
[    93.000] (II) This device may have been added with another device file.
[    93.001] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[    93.001] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[    93.001] (II) Using input driver 'evdev' for 'Sleep Button'
[    93.001] (**) Sleep Button: always reports core events
[    93.001] (**) evdev: Sleep Button: Device: "/dev/input/event2"
[    93.001] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[    93.001] (--) evdev: Sleep Button: Found keys
[    93.001] (II) evdev: Sleep Button: Configuring as keyboard
[    93.001] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2/event2"
[    93.001] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
[    93.001] (**) Option "xkb_rules" "evdev"
[    93.001] (**) Option "xkb_model" "pc104"
[    93.002] (**) Option "xkb_layout" "us"
[    93.003] (II) config/udev: Adding drm device (/dev/dri/card0)
[    93.004] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[    93.004] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[    93.004] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[    93.005] (**) AT Translated Set 2 keyboard: always reports core events
[    93.005] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[    93.005] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[    93.005] (--) evdev: AT Translated Set 2 keyboard: Found keys
[    93.005] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[    93.005] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[    93.005] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 9)
[    93.005] (**) Option "xkb_rules" "evdev"
[    93.005] (**) Option "xkb_model" "pc104"
[    93.005] (**) Option "xkb_layout" "us"
[    93.007] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event7)
[    93.007] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[    93.007] (II) Using input driver 'evdev' for 'SynPS/2 Synaptics TouchPad'
[    93.008] (**) SynPS/2 Synaptics TouchPad: always reports core events
[    93.008] (**) evdev: SynPS/2 Synaptics TouchPad: Device: "/dev/input/event7"
[    93.008] (--) evdev: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[    93.008] (--) evdev: SynPS/2 Synaptics TouchPad: Found 3 mouse buttons
[    93.008] (--) evdev: SynPS/2 Synaptics TouchPad: Found absolute axes
[    93.008] (--) evdev: SynPS/2 Synaptics TouchPad: Found x and y absolute axes
[    93.008] (--) evdev: SynPS/2 Synaptics TouchPad: Found absolute touchpad.
[    93.008] (II) evdev: SynPS/2 Synaptics TouchPad: Configuring as touchpad
[    93.008] (**) evdev: SynPS/2 Synaptics TouchPad: YAxisMapping: buttons 4 and 5
[    93.008] (**) evdev: SynPS/2 Synaptics TouchPad: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    93.008] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input7/event7"
[    93.008] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 10)
[    93.008] (II) evdev: SynPS/2 Synaptics TouchPad: initialized for absolute axes.
[    93.009] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[    93.009] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 0
[    93.009] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[    93.009] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[    93.010] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[    93.010] (II) No input driver specified, ignoring this device.
[    93.010] (II) This device may have been added with another device file.
[    93.011] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/event8)
[    93.011] (**) TPPS/2 IBM TrackPoint: Applying InputClass "evdev pointer catchall"
[    93.011] (II) Using input driver 'evdev' for 'TPPS/2 IBM TrackPoint'
[    93.011] (**) TPPS/2 IBM TrackPoint: always reports core events
[    93.011] (**) evdev: TPPS/2 IBM TrackPoint: Device: "/dev/input/event8"
[    93.012] (--) evdev: TPPS/2 IBM TrackPoint: Vendor 0x2 Product 0xa
[    93.012] (--) evdev: TPPS/2 IBM TrackPoint: Found 3 mouse buttons
[    93.012] (--) evdev: TPPS/2 IBM TrackPoint: Found relative axes
[    93.012] (--) evdev: TPPS/2 IBM TrackPoint: Found x and y relative axes
[    93.012] (II) evdev: TPPS/2 IBM TrackPoint: Configuring as mouse
[    93.012] (**) evdev: TPPS/2 IBM TrackPoint: YAxisMapping: buttons 4 and 5
[    93.012] (**) evdev: TPPS/2 IBM TrackPoint: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    93.012] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/serio2/input/input8/event8"
[    93.012] (II) XINPUT: Adding extended input device "TPPS/2 IBM TrackPoint" (type: MOUSE, id 11)
[    93.012] (II) evdev: TPPS/2 IBM TrackPoint: initialized for relative axes.
[    93.013] (**) TPPS/2 IBM TrackPoint: (accel) keeping acceleration scheme 1
[    93.013] (**) TPPS/2 IBM TrackPoint: (accel) acceleration profile 0
[    93.013] (**) TPPS/2 IBM TrackPoint: (accel) acceleration factor: 2.000
[    93.013] (**) TPPS/2 IBM TrackPoint: (accel) acceleration threshold: 4
[    93.014] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/mouse1)
[    93.014] (II) No input driver specified, ignoring this device.
[    93.014] (II) This device may have been added with another device file.
[    93.015] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
[    93.015] (II) No input driver specified, ignoring this device.
[    93.015] (II) This device may have been added with another device file.
[    93.016] (II) config/udev: Adding input device ThinkPad Extra Buttons (/dev/input/event5)
[    93.016] (**) ThinkPad Extra Buttons: Applying InputClass "evdev keyboard catchall"
[    93.017] (II) Using input driver 'evdev' for 'ThinkPad Extra Buttons'
[    93.017] (**) ThinkPad Extra Buttons: always reports core events
[    93.017] (**) evdev: ThinkPad Extra Buttons: Device: "/dev/input/event5"
[    93.017] (--) evdev: ThinkPad Extra Buttons: Vendor 0x1014 Product 0x5054
[    93.017] (--) evdev: ThinkPad Extra Buttons: Found keys
[    93.017] (II) evdev: ThinkPad Extra Buttons: Configuring as keyboard
[    93.017] (**) Option "config_info" "udev:/sys/devices/platform/thinkpad_acpi/input/input5/event5"
[    93.017] (II) XINPUT: Adding extended input device "ThinkPad Extra Buttons" (type: KEYBOARD, id 12)
[    93.017] (**) Option "xkb_rules" "evdev"
[    93.017] (**) Option "xkb_model" "pc104"
[    93.017] (**) Option "xkb_layout" "us"
[   222.513] (II) AIGLX: Suspending AIGLX clients for VT switch
[   311.513] (II) AIGLX: Resuming AIGLX clients after VT switch
[   311.617] setversion 1.4 failed
[root@fuck ~]#

20-radeon.conf

[root@fuck ~]# cat /etc/X11/xorg.conf.d/20-radeon.conf 
Section "Device"
  Identifier "Radeon"
  Driver "radeon"
  Option "MigrationHeuristic" "greedy"

Last edited by the dude (2013-08-16 15:02:54)

HalosGhost · 2013-08-16 14:55:13

Please use code tags for posting code, not quote tags:

to see how this is being done, click the quote button on my post, or read through the BBCode help page

All the best,

-HG

the dude · 2013-08-16 15:03:35

HalosGhost wrote:

Please use code tags for posting code, not quote tags:
to see how this is being done, click the quote button on my post, or read through the BBCode help page
All the best,
-HG

Ahh, Ok... Fixed.. Thanks

Lone_Wolf · 2013-08-16 15:51:30

The Xorg0.log doesn't appear to show problems (although it does feel a bit weird to see only xrandr 1.2 supported) .

please post the output of glxinfo | grep render

I don't know what

Option "MigrationHeuristic" "greedy"

does, but please try commenting it out to see if it makes a difference.

Trilby · 2013-08-16 15:56:34

Lone_Wolf, I wondered about that too - it seems to be recommended in the troubleshooting section of the ati wiki page.

The dude, you've also tried without any xorg conf files, right? Generally no such file would be needed, but if you've tried with and without it and get similar results it shouldn't be part of the issue.

the dude · 2013-08-16 16:14:07

Lone_Wolf wrote:

The Xorg0.log doesn't appear to show problems (although it does feel a bit weird to see only xrandr 1.2 supported) .
please post the output of glxinfo | grep render
I don't know what
Option "MigrationHeuristic" "greedy"
does, but please try commenting it out to see if it makes a difference.

Glxinfo:

[root@fuck ~]# glxinfo |grep render
direct rendering: Yes
OpenGL renderer string: Gallium 0.4 on llvmpipe (LLVM 3.2, 128 bits)
    GL_NV_conditional_render, GL_NV_fog_distance, GL_NV_light_max_exponent, 
[root@fuck ~]# glxgears
162 frames in 5.0 seconds = 32.323 FPS
282 frames in 5.0 seconds = 56.350 FPS

Commenting out

Option "MigrationHeuristic" "greedy"

Makes no diff..

Trilby:

The dude, you've also tried without any xorg conf files, right? Generally no such file would be needed, but if you've tried with and without it and get similar results it shouldn't be part of the issue.

I have not tried that, so just rename xorg.conf to xorg.conf-backup and reboot ?

When i do a " locate xorg | grep conf " it comes up with xorg.conf.d , no xorg.conf ... or do you mean try without the 20-radeon.conf under "/etc/X11/xorg.conf.d" ?

AFK Till morning now .. Cheers

Last edited by the dude (2013-08-16 16:25:28)

Trilby · 2013-08-16 16:28:35

Yes, sorry, I meant the 20-radeon.conf.

Generally, X should run fine with nothing in /etc/X11/xorg.conf.d/. Any files there are often collectively referred to as xorg conf files. That 20-radeon.conf is recommended in the wiki as a troubleshooting step, but I'd recommend always starting as simple as possible, and only add such configurations if they are found to be needed.

the dude · 2013-08-16 16:41:20

Trilby wrote:

Yes, sorry, I meant the 20-radeon.conf.
Generally, X should run fine with nothing in /etc/X11/xorg.conf.d/. Any files there are often collectively referred to as xorg conf files. That 20-radeon.conf is recommended in the wiki as a troubleshooting step, but I'd recommend always starting as simple as possible, and only add such configurations if they are found to be needed.

Ok, I removed 20-radeon.conf, Same deal... Made no diff ..

the dude · 2013-08-16 16:53:31

I get the feeling something in the kernel needs to be turned on.. but i have
No idea what or how to do it.. In saying that all the needed modules seem to be loading .. ?

I have read a few kernel wiki's but cant make sense of it..

Just incase it helps here is an output of dmesg

[root@fuck ~]# dmesg
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.10.6-2-ARCH (tobias@testing-i686) (gcc version 4.8.1 20130725 (prerelease) (GCC) ) #1 SMP PREEMPT Tue Aug 13 10:20:52 CEST 2013
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000d2000-0x00000000000d3fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000dc000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001ff5ffff] usable
[    0.000000] BIOS-e820: [mem 0x000000001ff60000-0x000000001ff79fff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000001ff7a000-0x000000001ff7bfff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000001ff7c000-0x000000001fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff800000-0x00000000ffffffff] reserved
[    0.000000] Notice: NX (Execute Disable) protection missing in CPU!
[    0.000000] SMBIOS 2.3 present.
[    0.000000] DMI: IBM 236681M/236681M, BIOS 1IET58WW (2.01 ) 08/06/2002
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x1ff60 max_arch_pfn = 0x100000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-CFFFF write-protect
[    0.000000]   D0000-DBFFF uncachable
[    0.000000]   DC000-DFFFF write-back
[    0.000000]   E0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask FE0000000 write-back
[    0.000000]   1 base 01FF80000 mask FFFF80000 uncachable
[    0.000000]   2 disabled
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] initial memory mapped: [mem 0x00000000-0x01bfffff]
[    0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] init_memory_mapping: [mem 0x1f800000-0x1fbfffff]
[    0.000000]  [mem 0x1f800000-0x1fbfffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x18000000-0x1f7fffff]
[    0.000000]  [mem 0x18000000-0x1f7fffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x00100000-0x17ffffff]
[    0.000000]  [mem 0x00100000-0x003fffff] page 4k
[    0.000000]  [mem 0x00400000-0x17ffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x1fc00000-0x1ff5ffff]
[    0.000000]  [mem 0x1fc00000-0x1ff5ffff] page 4k
[    0.000000] BRK [0x01751000, 0x01751fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x1f14a000-0x1f409fff]
[    0.000000] ACPI: RSDP 000f7010 00024 (v02 IBM   )
[    0.000000] ACPI: XSDT 1ff6f3a8 0004C (v01 IBM    TP-1I    00002010  LTP 00000000)
[    0.000000] ACPI: FACP 1ff6f3f4 00081 (v01 IBM    TP-1I    00002010 IBM  00000001)
[    0.000000] ACPI: DSDT 1ff6f4db 0AA7A (v01 IBM    TP-1I    00002010 MSFT 0100000D)
[    0.000000] ACPI: FACS 1ff7b000 00040
[    0.000000] ACPI: SSDT 1ff6f4a8 00033 (v01 IBM    TP-1I    00002010 MSFT 0100000D)
[    0.000000] ACPI: ECDT 1ff79f55 00051 (v01 IBM    TP-1I    00002010 IBM  00000001)
[    0.000000] ACPI: TCPA 1ff79fa6 00032 (v01 IBM    TP-1I    00002010 PTL  00000001)
[    0.000000] ACPI: BOOT 1ff79fd8 00028 (v01 IBM    TP-1I    00002010  LTP 00000001)
[    0.000000] 0MB HIGHMEM available.
[    0.000000] 511MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 1ff60000
[    0.000000]   low ram: 0 - 1ff60000
[    0.000000] BRK [0x01752000, 0x01752fff] PGTABLE
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   Normal   [mem 0x01000000-0x1ff5ffff]
[    0.000000]   HighMem  empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x0009efff]
[    0.000000]   node   0: [mem 0x00100000-0x1ff5ffff]
[    0.000000] On node 0 totalpages: 130814
[    0.000000] free_area_init_node: node 0, pgdat c15b3340, node_mem_map dfb60020
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   Normal zone: 991 pages used for memmap
[    0.000000]   Normal zone: 126816 pages, LIFO batch:31
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x1008
[    0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs
[    0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic"
[    0.000000] APIC: disable apic facility
[    0.000000] APIC: switched to apic NOOP
[    0.000000] nr_irqs_gsi: 16
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000
[    0.000000] PM: Registered nosave memory: 00000000000d2000 - 00000000000d4000
[    0.000000] PM: Registered nosave memory: 00000000000d4000 - 00000000000dc000
[    0.000000] PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
[    0.000000] e820: [mem 0x20000000-0xff7fffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1
[    0.000000] PERCPU: Embedded 14 pages/cpu @dfb4e000 s33344 r0 d24000 u57344
[    0.000000] pcpu-alloc: s33344 r0 d24000 u57344 alloc=14*4096
[    0.000000] pcpu-alloc: [0] 0 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 129791
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=3b281876-2f49-4f73-8303-8143a6560c82 rw quiet
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Initializing CPU#0
[    0.000000] allocated 1047288 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] Initializing HighMem for node 0 (00000000:00000000)
[    0.000000] Memory: 507276k/523648k available (4168k kernel code, 15980k reserved, 1736k data, 596k init, 0k highmem)
[    0.000000] virtual kernel memory layout:
    fixmap  : 0xfff14000 - 0xfffff000   ( 940 kB)
    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
    vmalloc : 0xe0760000 - 0xff7fe000   ( 496 MB)
    lowmem  : 0xc0000000 - 0xdff60000   ( 511 MB)
      .init : 0xc15c5000 - 0xc165a000   ( 596 kB)
      .data : 0xc141205e - 0xc15c4400   (1736 kB)
      .text : 0xc1000000 - 0xc141205e   (4168 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] SLUB: HWalign=128, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] 	Dump stacks of tasks blocking RCU-preempt GP.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=1.
[    0.000000] NR_IRQS:2304 nr_irqs:256 16
[    0.000000] CPU 0 irqstacks, hard=dec06000 soft=dec08000
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 1798.343 MHz processor
[    0.003336] Calibrating delay loop (skipped), value calculated using timer frequency.. 3598.54 BogoMIPS (lpj=5994476)
[    0.003346] pid_max: default: 32768 minimum: 301
[    0.003441] Security Framework initialized
[    0.003458] AppArmor: AppArmor disabled by boot time parameter
[    0.003489] Mount-cache hash table entries: 512
[    0.003946] Initializing cgroup subsys memory
[    0.003973] Initializing cgroup subsys devices
[    0.003979] Initializing cgroup subsys freezer
[    0.003984] Initializing cgroup subsys net_cls
[    0.003989] Initializing cgroup subsys blkio
[    0.004062] CPU0: Hyper-Threading is disabled
[    0.004070] mce: CPU supports 4 MCE banks
[    0.004108] Last level iTLB entries: 4KB 64, 2MB 64, 4MB 64
Last level dTLB entries: 4KB 64, 2MB 0, 4MB 64
tlb_flushall_shift: 6
[    0.014707] Freeing SMP alternatives: 16k freed
[    0.016477] ACPI: Core revision 20130328
[    0.027134] ACPI: All ACPI Tables successfully acquired
[    0.027147] ACPI: setting ELCR to 0200 (from 0800)
[    0.030023] ftrace: allocating 18673 entries in 37 pages
[    0.046923] smpboot: weird, boot CPU (#0) not listed by the BIOS
[    0.046933] smpboot: SMP motherboard not detected
[    0.046937] smpboot: Local APIC not detected. Using dummy APIC emulation.
[    0.046940] smpboot: SMP disabled
[    0.046965] Performance Events: Netburst events, 
[    0.046975] no APIC, boot with the "lapic" boot parameter to force-enable it.
[    0.046979] no hardware sampling interrupt available.
[    0.046986] Netburst P4/Xeon PMU driver.
[    0.046993] ... version:                0
[    0.046996] ... bit width:              40
[    0.046999] ... generic registers:      18
[    0.047002] ... value mask:             000000ffffffffff
[    0.047006] ... max period:             0000007fffffffff
[    0.047009] ... fixed-purpose events:   0
[    0.047012] ... event mask:             000000000003ffff
[    0.063348] Brought up 1 CPUs
[    0.063359] smpboot: Total of 1 processors activated (3598.54 BogoMIPS)
[    0.063512] NMI watchdog: disabled (cpu0): not supported (no LAPIC?)
[    0.063745] devtmpfs: initialized
[    0.064216] PM: Registering ACPI NVS region [mem 0x1ff7a000-0x1ff7bfff] (8192 bytes)
[    0.066584] RTC time: 16:36:34, date: 08/16/13
[    0.066772] NET: Registered protocol family 16
[    0.067161] ACPI: bus type PCI registered
[    0.067169] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.067406] PCI: PCI BIOS revision 2.10 entry at 0xfd8fe, last bus=8
[    0.067410] PCI: Using configuration type 1 for base access
[    0.069125] bio: create slab <bio-0> at 0
[    0.069360] ACPI: Added _OSI(Module Device)
[    0.069367] ACPI: Added _OSI(Processor Device)
[    0.069371] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.069376] ACPI: Added _OSI(Processor Aggregator Device)
[    0.071834] ACPI: EC: EC description table is found, configuring boot EC
[    0.084683] ACPI: Interpreter enabled
[    0.084705] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130328/hwxface-568)
[    0.084715] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130328/hwxface-568)
[    0.084747] ACPI: (supports S0 S3 S4 S5)
[    0.084753] ACPI: Using PIC for interrupt routing
[    0.084801] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[    0.088187] ACPI: ACPI Dock Station Driver: 3 docks/bays found
[    0.095209] ACPI: Power Resource [PUBS] (on)
[    0.104343] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
[    0.104625] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
[    0.104900] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
[    0.105175] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
[    0.105450] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
[    0.105660] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
[    0.105872] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
[    0.106085] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
[    0.106210] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.106269] acpi PNP0A03:00: host bridge window [io  0x0000-0x0cf7] (ignored)
[    0.106277] acpi PNP0A03:00: host bridge window [io  0x0d00-0xffff] (ignored)
[    0.106284] acpi PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[    0.106290] acpi PNP0A03:00: host bridge window [mem 0x000d4000-0x000d7fff] (ignored)
[    0.106296] acpi PNP0A03:00: host bridge window [mem 0x000d8000-0x000dbfff] (ignored)
[    0.106302] acpi PNP0A03:00: host bridge window [mem 0x20000000-0xfebfffff] (ignored)
[    0.106308] PCI: root bus 00: using default resources
[    0.106316] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
[    0.106512] PCI host bridge to bus 0000:00
[    0.106522] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.106528] pci_bus 0000:00: root bus resource [io  0x0000-0xffff]
[    0.106534] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff]
[    0.106561] pci 0000:00:00.0: [8086:1a30] type 00 class 0x060000
[    0.106579] pci 0000:00:00.0: reg 10: [mem 0xe0000000-0xe3ffffff pref]
[    0.106780] pci 0000:00:01.0: [8086:1a31] type 01 class 0x060400
[    0.106955] pci 0000:00:1d.0: [8086:2482] type 00 class 0x0c0300
[    0.107020] pci 0000:00:1d.0: reg 20: [io  0x1800-0x181f]
[    0.107275] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    0.107275] pci 0000:00:1d.1: [8086:2484] type 00 class 0x0c0300
[    0.107275] pci 0000:00:1d.1: reg 20: [io  0x1820-0x183f]
[    0.107275] pci 0000:00:1d.1: System wakeup disabled by ACPI
[    0.107275] pci 0000:00:1d.2: [8086:2487] type 00 class 0x0c0300
[    0.107275] pci 0000:00:1d.2: reg 20: [io  0x1840-0x185f]
[    0.107284] pci 0000:00:1d.2: System wakeup disabled by ACPI
[    0.107389] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060400
[    0.107476] pci 0000:00:1e.0: System wakeup disabled by ACPI
[    0.107572] pci 0000:00:1f.0: [8086:248c] type 00 class 0x060100
[    0.107669] pci 0000:00:1f.0: quirk: [io  0x1000-0x107f] claimed by ICH4 ACPI/GPIO/TCO
[    0.107678] pci 0000:00:1f.0: quirk: [io  0x1180-0x11bf] claimed by ICH4 GPIO
[    0.107778] pci 0000:00:1f.1: [8086:248a] type 00 class 0x01018a
[    0.107803] pci 0000:00:1f.1: reg 10: [io  0x01f0-0x01f7]
[    0.107819] pci 0000:00:1f.1: reg 14: [io  0x03f4-0x03f7]
[    0.107835] pci 0000:00:1f.1: reg 18: [io  0x0170-0x0177]
[    0.107851] pci 0000:00:1f.1: reg 1c: [io  0x0374-0x0377]
[    0.107867] pci 0000:00:1f.1: reg 20: [io  0x1860-0x186f]
[    0.107883] pci 0000:00:1f.1: reg 24: [mem 0x00000000-0x000003ff]
[    0.108020] pci 0000:00:1f.3: [8086:2483] type 00 class 0x0c0500
[    0.108086] pci 0000:00:1f.3: reg 20: [io  0x1880-0x189f]
[    0.108234] pci 0000:00:1f.5: [8086:2485] type 00 class 0x040100
[    0.108257] pci 0000:00:1f.5: reg 10: [io  0x1c00-0x1cff]
[    0.108273] pci 0000:00:1f.5: reg 14: [io  0x18c0-0x18ff]
[    0.108470] pci 0000:00:1f.6: [8086:2486] type 00 class 0x070300
[    0.108493] pci 0000:00:1f.6: reg 10: [io  0x2400-0x24ff]
[    0.108509] pci 0000:00:1f.6: reg 14: [io  0x2000-0x207f]
[    0.108642] pci 0000:00:1f.6: System wakeup disabled by ACPI
[    0.108819] pci 0000:01:00.0: [1002:4c57] type 00 class 0x030000
[    0.108845] pci 0000:01:00.0: reg 10: [mem 0xe8000000-0xefffffff pref]
[    0.108859] pci 0000:01:00.0: reg 14: [io  0x3000-0x30ff]
[    0.108872] pci 0000:01:00.0: reg 18: [mem 0xd0100000-0xd010ffff]
[    0.108908] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[    0.108953] pci 0000:01:00.0: supports D1 D2
[    0.110121] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.110131] pci 0000:00:01.0:   bridge window [io  0x3000-0x3fff]
[    0.110140] pci 0000:00:01.0:   bridge window [mem 0xd0100000-0xd01fffff]
[    0.110147] pci 0000:00:01.0:   bridge window [mem 0xe8000000-0xefffffff pref]
[    0.110320] acpiphp: Slot [1-1] registered
[    0.110352] pci 0000:02:00.0: [104c:ac55] type 02 class 0x060700
[    0.110380] pci 0000:02:00.0: reg 10: [mem 0x50000000-0x50000fff]
[    0.110423] pci 0000:02:00.0: supports D1 D2
[    0.110428] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.110547] pci 0000:02:00.1: [104c:ac55] type 02 class 0x060700
[    0.110575] pci 0000:02:00.1: reg 10: [mem 0x51000000-0x51000fff]
[    0.110616] pci 0000:02:00.1: supports D1 D2
[    0.110621] pci 0000:02:00.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.110767] pci 0000:02:08.0: [8086:1031] type 00 class 0x020000
[    0.110794] pci 0000:02:08.0: reg 10: [mem 0xd0200000-0xd0200fff]
[    0.110809] pci 0000:02:08.0: reg 14: [io  0x8000-0x803f]
[    0.110898] pci 0000:02:08.0: supports D1 D2
[    0.110904] pci 0000:02:08.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.111044] pci 0000:00:1e.0: PCI bridge to [bus 02-08] (subtractive decode)
[    0.111054] pci 0000:00:1e.0:   bridge window [io  0x4000-0x8fff]
[    0.111063] pci 0000:00:1e.0:   bridge window [mem 0xd0200000-0xdfffffff]
[    0.111072] pci 0000:00:1e.0:   bridge window [mem 0xf0000000-0xf7ffffff pref]
[    0.111078] pci 0000:00:1e.0:   bridge window [io  0x0000-0xffff] (subtractive decode)
[    0.111083] pci 0000:00:1e.0:   bridge window [mem 0x00000000-0xffffffff] (subtractive decode)
[    0.111180] pci_bus 0000:03: busn_res: can not insert [bus 03-ff] under [bus 02-08] (conflicts with (null) [bus 02-08])
[    0.111191] pci_bus 0000:03: busn_res: [bus 03-ff] end is updated to 06
[    0.111278] pci_bus 0000:07: busn_res: can not insert [bus 07-ff] under [bus 02-08] (conflicts with (null) [bus 02-08])
[    0.111289] pci_bus 0000:07: busn_res: [bus 07-ff] end is updated to 07
[    0.111311] pci_bus 0000:00: on NUMA node 0
[    0.111319] acpi PNP0A03:00: ACPI _OSC support notification failed, disabling PCIe ASPM
[    0.111325] acpi PNP0A03:00: Unable to request _OSC control (_OSC support mask: 0x08)
[    0.111884] acpi root: \_SB_.PCI0 notify handler is installed
[    0.113361] Found 1 acpi root devices
[    0.113507] ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
[    0.113720] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.113727] vgaarb: loaded
[    0.113730] vgaarb: bridge control possible 0000:01:00.0
[    0.113846] PCI: Using ACPI for IRQ routing
[    0.114039] PCI: pci_cache_line_size set to 64 bytes
[    0.114108] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
[    0.114115] e820: reserve RAM buffer [mem 0x1ff60000-0x1fffffff]
[    0.114362] NetLabel: Initializing
[    0.114367] NetLabel:  domain hash size = 128
[    0.114369] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.114408] NetLabel:  unlabeled traffic allowed by default
[    0.114469] Switching to clocksource pit
[    0.127880] pnp: PnP ACPI init
[    0.127928] ACPI: bus type PNP registered
[    0.129273] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.129282] system 00:00: [mem 0x000c0000-0x000c3fff] could not be reserved
[    0.129289] system 00:00: [mem 0x000c4000-0x000c7fff] could not be reserved
[    0.129295] system 00:00: [mem 0x000c8000-0x000cbfff] could not be reserved
[    0.129301] system 00:00: [mem 0x000cc000-0x000cffff] could not be reserved
[    0.129308] system 00:00: [mem 0x000d0000-0x000d3fff] could not be reserved
[    0.129314] system 00:00: [mem 0x000dc000-0x000dffff] could not be reserved
[    0.129321] system 00:00: [mem 0x000e0000-0x000e3fff] could not be reserved
[    0.129327] system 00:00: [mem 0x000e4000-0x000e7fff] could not be reserved
[    0.129334] system 00:00: [mem 0x000e8000-0x000ebfff] could not be reserved
[    0.129340] system 00:00: [mem 0x000ec000-0x000effff] could not be reserved
[    0.129346] system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved
[    0.129353] system 00:00: [mem 0x00100000-0x1fffffff] could not be reserved
[    0.129360] system 00:00: [mem 0xfec00000-0xffffffff] could not be reserved
[    0.129371] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.129519] system 00:01: [io  0x1000-0x107f] has been reserved
[    0.129527] system 00:01: [io  0x1180-0x11bf] has been reserved
[    0.129533] system 00:01: [io  0x15e0-0x15ef] has been reserved
[    0.129539] system 00:01: [io  0x1600-0x167f] has been reserved
[    0.129547] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.129593] pnp 00:02: [dma 4]
[    0.129646] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.129715] pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active)
[    0.129789] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.129869] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.129939] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.130011] pnp 00:07: Plug and Play ACPI device, IDs IBM0057 PNP0f13 (active)
[    0.130081] pnp 00:08: [dma 2]
[    0.130165] pnp 00:08: Plug and Play ACPI device, IDs PNP0700 (active)
[    0.130366] pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (disabled)
[    0.130720] pnp 00:0a: Plug and Play ACPI device, IDs PNP0400 (active)
[    0.130962] pnp 00:0b: Plug and Play ACPI device, IDs IBM0071 PNP0511 (disabled)
[    0.132065] pnp: PnP ACPI: found 12 devices
[    0.132071] ACPI: bus type PNP unregistered
[    0.171012] Switching to clocksource acpi_pm
[    0.171118] pci 0000:00:1f.1: BAR 5: assigned [mem 0x20000000-0x200003ff]
[    0.171135] pci 0000:01:00.0: BAR 6: assigned [mem 0xd0120000-0xd013ffff pref]
[    0.171141] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.171148] pci 0000:00:01.0:   bridge window [io  0x3000-0x3fff]
[    0.171157] pci 0000:00:01.0:   bridge window [mem 0xd0100000-0xd01fffff]
[    0.171164] pci 0000:00:01.0:   bridge window [mem 0xe8000000-0xefffffff pref]
[    0.171182] pci 0000:02:00.0: res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000
[    0.171188] pci 0000:02:00.0: res[16]=[mem 0x04000000-0x03ffffff] get_res_add_size add_size 4000000
[    0.171195] pci 0000:02:00.1: res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000
[    0.171201] pci 0000:02:00.1: res[16]=[mem 0x04000000-0x03ffffff] get_res_add_size add_size 4000000
[    0.171207] pci 0000:02:00.0: res[13]=[io  0x0100-0x00ff] get_res_add_size add_size 100
[    0.171213] pci 0000:02:00.0: res[14]=[io  0x0100-0x00ff] get_res_add_size add_size 100
[    0.171219] pci 0000:02:00.1: res[13]=[io  0x0100-0x00ff] get_res_add_size add_size 100
[    0.171224] pci 0000:02:00.1: res[14]=[io  0x0100-0x00ff] get_res_add_size add_size 100
[    0.171231] pci 0000:02:00.0: BAR 15: assigned [mem 0xf0000000-0xf3ffffff pref]
[    0.171237] pci 0000:02:00.0: BAR 16: assigned [mem 0xd4000000-0xd7ffffff]
[    0.171243] pci 0000:02:00.1: BAR 15: assigned [mem 0xf4000000-0xf7ffffff pref]
[    0.171249] pci 0000:02:00.1: BAR 16: assigned [mem 0xd8000000-0xdbffffff]
[    0.171255] pci 0000:02:00.0: BAR 13: assigned [io  0x4000-0x40ff]
[    0.171261] pci 0000:02:00.0: BAR 14: assigned [io  0x4400-0x44ff]
[    0.171267] pci 0000:02:00.1: BAR 13: assigned [io  0x4800-0x48ff]
[    0.171272] pci 0000:02:00.1: BAR 14: assigned [io  0x4c00-0x4cff]
[    0.171282] pci 0000:02:00.0: CardBus bridge to [bus 03-06]
[    0.171287] pci 0000:02:00.0:   bridge window [io  0x4000-0x40ff]
[    0.171295] pci 0000:02:00.0:   bridge window [io  0x4400-0x44ff]
[    0.171303] pci 0000:02:00.0:   bridge window [mem 0xf0000000-0xf3ffffff pref]
[    0.171312] pci 0000:02:00.0:   bridge window [mem 0xd4000000-0xd7ffffff]
[    0.171320] pci 0000:02:00.1: CardBus bridge to [bus 07]
[    0.171325] pci 0000:02:00.1:   bridge window [io  0x4800-0x48ff]
[    0.171333] pci 0000:02:00.1:   bridge window [io  0x4c00-0x4cff]
[    0.171341] pci 0000:02:00.1:   bridge window [mem 0xf4000000-0xf7ffffff pref]
[    0.171349] pci 0000:02:00.1:   bridge window [mem 0xd8000000-0xdbffffff]
[    0.171357] pci 0000:00:1e.0: PCI bridge to [bus 02-08]
[    0.171364] pci 0000:00:1e.0:   bridge window [io  0x4000-0x8fff]
[    0.171374] pci 0000:00:1e.0:   bridge window [mem 0xd0200000-0xdfffffff]
[    0.171382] pci 0000:00:1e.0:   bridge window [mem 0xf0000000-0xf7ffffff pref]
[    0.171414] pci 0000:00:1e.0: setting latency timer to 64
[    0.171847] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
[    0.171853] PCI: setting IRQ 11 as level-triggered
[    0.172267] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
[    0.172282] pci_bus 0000:00: resource 4 [io  0x0000-0xffff]
[    0.172289] pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff]
[    0.172295] pci_bus 0000:01: resource 0 [io  0x3000-0x3fff]
[    0.172301] pci_bus 0000:01: resource 1 [mem 0xd0100000-0xd01fffff]
[    0.172306] pci_bus 0000:01: resource 2 [mem 0xe8000000-0xefffffff pref]
[    0.172312] pci_bus 0000:02: resource 0 [io  0x4000-0x8fff]
[    0.172317] pci_bus 0000:02: resource 1 [mem 0xd0200000-0xdfffffff]
[    0.172323] pci_bus 0000:02: resource 2 [mem 0xf0000000-0xf7ffffff pref]
[    0.172328] pci_bus 0000:02: resource 4 [io  0x0000-0xffff]
[    0.172333] pci_bus 0000:02: resource 5 [mem 0x00000000-0xffffffff]
[    0.172339] pci_bus 0000:03: resource 0 [io  0x4000-0x40ff]
[    0.172344] pci_bus 0000:03: resource 1 [io  0x4400-0x44ff]
[    0.172350] pci_bus 0000:03: resource 2 [mem 0xf0000000-0xf3ffffff pref]
[    0.172355] pci_bus 0000:03: resource 3 [mem 0xd4000000-0xd7ffffff]
[    0.172361] pci_bus 0000:07: resource 0 [io  0x4800-0x48ff]
[    0.172366] pci_bus 0000:07: resource 1 [io  0x4c00-0x4cff]
[    0.172371] pci_bus 0000:07: resource 2 [mem 0xf4000000-0xf7ffffff pref]
[    0.172376] pci_bus 0000:07: resource 3 [mem 0xd8000000-0xdbffffff]
[    0.172471] NET: Registered protocol family 2
[    0.172879] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
[    0.172918] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[    0.172952] TCP: Hash tables configured (established 4096 bind 4096)
[    0.173012] TCP: reno registered
[    0.173019] UDP hash table entries: 256 (order: 1, 8192 bytes)
[    0.173031] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[    0.173159] NET: Registered protocol family 1
[    0.173208] pci 0000:00:1d.0: power state changed by ACPI to D0
[    0.173326] pci 0000:00:1d.1: power state changed by ACPI to D0
[    0.173763] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
[    0.174154] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
[    0.174235] pci 0000:01:00.0: Boot video device
[    0.174283] pci 0000:02:08.0: Firmware left e100 interrupts enabled; disabling
[    0.174296] PCI: CLS 32 bytes, default 64
[    0.174418] Unpacking initramfs...
[    0.301224] Freeing initrd memory: 2816k freed
[    0.306451] Simple Boot Flag at 0x35 set to 0x1
[    0.306536] IBM machine detected. Enabling interrupts during APM calls.
[    0.306540] apm: BIOS not found.
[    0.306744] Scanning for low memory corruption every 60 seconds
[    0.307297] audit: initializing netlink socket (disabled)
[    0.307332] type=2000 audit(1376670994.304:1): initialized
[    0.326796] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    0.330220] VFS: Disk quotas dquot_6.5.2
[    0.330339] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.330814] msgmni has been set to 996
[    0.331336] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    0.331405] io scheduler noop registered
[    0.331411] io scheduler deadline registered
[    0.331487] io scheduler cfq registered (default)
[    0.331726] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.331862] vesafb: mode is 1024x768x32, linelength=4096, pages=0
[    0.331867] vesafb: scrolling: redraw
[    0.331874] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[    0.332291] vesafb: framebuffer at 0xe8000000, mapped to 0xe0780000, using 3072k, total 3072k
[    0.420567] Console: switching to colour frame buffer device 128x48
[    0.508462] fb0: VESA VGA frame buffer device
[    0.508548] GHES: HEST is not enabled!
[    0.508585] isapnp: Scanning for PnP cards...
[    0.820999] isapnp: No Plug & Play device found
[    0.821109] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    0.821321] serial 00:09: [io  0x03f8-0x03ff]
[    0.821380] serial 00:09: [irq 4]
[    0.821966] serial 00:09: activated
[    0.822047] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a NS16550A
[    0.823143] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[    0.829505] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.829587] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.829819] mousedev: PS/2 mouse device common for all mice
[    0.830049] rtc_cmos 00:05: RTC can wake from S4
[    0.830287] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[    0.830317] rtc_cmos 00:05: alarms up to one year, y3k, 114 bytes nvram
[    0.830385] cpuidle: using governor ladder
[    0.830390] cpuidle: using governor menu
[    0.830454] drop_monitor: Initializing network drop monitor service
[    0.830691] TCP: cubic registered
[    0.830957] NET: Registered protocol family 10
[    0.831359] NET: Registered protocol family 17
[    0.831389] Key type dns_resolver registered
[    0.831679] Using IPI No-Shortcut mode
[    0.831885] PM: Hibernation image not present or could not be loaded.
[    0.831910] registered taskstats version 1
[    0.832411]   Magic number: 9:492:641
[    0.832546] rtc_cmos 00:05: setting system clock to 2013-08-16 16:36:34 UTC (1376670994)
[    0.832747] Freeing unused kernel memory: 596k freed
[    0.833773] Write protecting the kernel text: 4172k
[    0.833821] Write protecting the kernel read-only data: 1316k
[    0.837994] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    0.857197] systemd-udevd[37]: starting version 204
[    0.934845] Floppy drive(s): fd0 is 1.44M
[    0.949888] FDC 0 is a National Semiconductor PC87306
[    0.962536] ACPI: bus type USB registered
[    0.962609] usbcore: registered new interface driver usbfs
[    0.962640] usbcore: registered new interface driver hub
[    0.969915] usbcore: registered new device driver usb
[    0.970900] uhci_hcd: USB Universal Host Controller Interface driver
[    0.971040] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    0.971049] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    0.971065] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[    0.971111] uhci_hcd 0000:00:1d.0: irq 11, io base 0x00001800
[    0.971956] hub 1-0:1.0: USB hub found
[    0.971971] hub 1-0:1.0: 2 ports detected
[    0.972336] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    0.972344] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    0.972359] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[    0.972398] uhci_hcd 0000:00:1d.1: irq 11, io base 0x00001820
[    0.973096] hub 2-0:1.0: USB hub found
[    0.973110] hub 2-0:1.0: 2 ports detected
[    0.974678] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    0.974689] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    0.974704] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[    0.974745] uhci_hcd 0000:00:1d.2: irq 11, io base 0x00001840
[    0.975577] hub 3-0:1.0: USB hub found
[    0.975590] hub 3-0:1.0: 2 ports detected
[    0.984559] SCSI subsystem initialized
[    0.988527] ACPI: bus type ATA registered
[    1.003523] libata version 3.00 loaded.
[    1.004330] ata_piix 0000:00:1f.1: version 2.13
[    1.004357] ata_piix 0000:00:1f.1: enabling device (0005 -> 0007)
[    1.004515] ata_piix 0000:00:1f.1: setting latency timer to 64
[    1.008058] scsi0 : ata_piix
[    1.012519] scsi1 : ata_piix
[    1.013032] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1860 irq 14
[    1.013039] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1868 irq 15
[    1.166898] ata2.01: NODEV after polling detection
[    1.170602] ata1.00: ATA-5: IC25N040ATCS05-0, CS4OA61A, max UDMA/100
[    1.170609] ata1.00: 78140160 sectors, multi 16: LBA 
[    1.183773] ata1.00: configured for UDMA/100
[    1.184019] scsi 0:0:0:0: Direct-Access     ATA      IC25N040ATCS05-0 CS4O PQ: 0 ANSI: 5
[    1.190400] ata2.00: ATAPI: HL-DT-STDVD-ROM GDR8081N, 0012, max UDMA/33
[    1.203562] ata2.00: configured for UDMA/33
[    1.211027] scsi 1:0:0:0: CD-ROM            HL-DT-ST DVD-ROM GDR8081N 0012 PQ: 0 ANSI: 5
[    1.225943] sd 0:0:0:0: [sda] 78140160 512-byte logical blocks: (40.0 GB/37.2 GiB)
[    1.226082] sd 0:0:0:0: [sda] Write Protect is off
[    1.226089] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.226147] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.229476] sr0: scsi3-mmc drive: 10x/24x cd/rw xa/form2 cdda tray
[    1.229488] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.229913] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    1.265365]  sda: sda1 sda2 sda3
[    1.266304] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.276741] usb 2-1: new full-speed USB device number 2 using uhci_hcd
[    1.306765] tsc: Refined TSC clocksource calibration: 1798.472 MHz
[    1.306779] Switching to clocksource tsc
[    2.018153] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    2.944071] systemd[1]: systemd 204 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
[    2.952799] systemd[1]: Set hostname to <fuck>.
[    3.472121] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory. See system logs and 'systemctl status display-manager.service' for details.
[    3.472777] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[    3.472967] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    3.473013] systemd[1]: Starting Remote File Systems.
[    3.473046] systemd[1]: Reached target Remote File Systems.
[    3.473078] systemd[1]: Starting Delayed Shutdown Socket.
[    3.473173] systemd[1]: Listening on Delayed Shutdown Socket.
[    3.473200] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[    3.473264] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    3.473289] systemd[1]: Starting Device-mapper event daemon FIFOs.
[    3.473459] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[    3.473491] systemd[1]: Starting LVM2 metadata daemon socket.
[    3.473572] systemd[1]: Listening on LVM2 metadata daemon socket.
[    3.473659] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[    3.473933] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    3.473986] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[    3.474084] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    3.474112] systemd[1]: Starting Paths.
[    3.474141] systemd[1]: Reached target Paths.
[    3.474180] systemd[1]: Starting Journal Socket.
[    3.474329] systemd[1]: Listening on Journal Socket.
[    3.474391] systemd[1]: Mounting Debug File System...
[    3.475574] systemd[1]: Starting Setup Virtual Console...
[    3.497292] systemd[1]: Started Set Up Additional Binary Formats.
[    3.497529] systemd[1]: Starting Create static device nodes in /dev...
[    3.515221] systemd[1]: Starting Apply Kernel Variables...
[    3.529212] systemd[1]: Started Load Kernel Modules.
[    3.529285] systemd[1]: Mounting Configuration File System...
[    3.530477] systemd[1]: Starting Journal Service...
[    3.531851] systemd[1]: Started Journal Service.
[    3.532004] systemd[1]: Mounting POSIX Message Queue File System...
[    3.533153] systemd[1]: Starting Encrypted Volumes.
[    3.533199] systemd[1]: Reached target Encrypted Volumes.
[    3.537091] systemd[1]: Starting udev Kernel Socket.
[    3.537198] systemd[1]: Listening on udev Kernel Socket.
[    3.537377] systemd[1]: Starting udev Control Socket.
[    3.537458] systemd[1]: Listening on udev Control Socket.
[    3.537610] systemd[1]: Starting udev Coldplug all Devices...
[    3.538892] systemd[1]: Mounted FUSE Control File System.
[    3.538950] systemd[1]: Mounting Huge Pages File System...
[    3.542357] systemd[1]: Expecting device dev-disk-by\x2duuid-075d0ab2\x2de5b7\x2d4e02\x2d9698\x2d2d66e1676787.device...
[    3.542417] systemd[1]: Mounting Temporary Directory...
[    3.574518] systemd[1]: Started File System Check on Root Device.
[    3.574562] systemd[1]: Starting Remount Root and Kernel File Systems...
[    3.575830] systemd[1]: Expecting device dev-disk-by\x2duuid-0beac043\x2da328\x2d43d6\x2db961\x2d579c5c028dcf.device...
[    4.580376] systemd-udevd[96]: starting version 204
[    4.604249] EXT4-fs (sda1): re-mounted. Opts: data=ordered
[    5.514783] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
[    5.514995] ACPI: Lid Switch [LID]
[    5.515130] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
[    5.515143] ACPI: Sleep Button [SLPB]
[    5.515285] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    5.515294] ACPI: Power Button [PWRF]
[    5.649374] ACPI: Requesting acpi_cpufreq
[    5.650521] ACPI: AC Adapter [AC] (on-line)
[    5.687305] tsc: Marking TSC unstable due to TSC halts in idle
[    5.687394] ACPI: acpi_idle registered with cpuidle
[    5.691292] Switching to clocksource acpi_pm
[    5.769743] ACPI: Video Device [VID] (multi-head: yes  rom: no  post: no)
[    5.771582] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:03/LNXVIDEO:00/input/input4
[    5.773407] ACPI: Battery Slot [BAT0] (battery present)
[    5.779857] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    5.869736] NET: Registered protocol family 23
[    5.913792] nsc-ircc 00:0b: [io  0x02f8-0x02ff]
[    5.913865] nsc-ircc 00:0b: [irq 3]
[    5.913874] nsc-ircc 00:0b: [dma 1]
[    5.914591] nsc-ircc 00:0b: activated
[    5.918139] nsc-ircc, chip->init
[    5.918156] nsc-ircc, Found chip at base=0x02e
[    5.918184] nsc-ircc, driver loaded (Dag Brattli)
[    5.918588] IrDA: Registered device irda0
[    5.918593] nsc-ircc, Using dongle: IBM31T1100 or Temic TFDS6000/TFDS6500
[    5.984967] parport_pc 00:0a: reported by Plug and Play ACPI
[    5.985024] parport0: PC-style at 0x3bc, irq 7 [PCSPP,TRISTATE]
[    6.083831] Non-volatile memory driver v1.3
[    6.085721] thermal LNXTHERM:00: registered as thermal_zone0
[    6.085733] ACPI: Thermal Zone [THM0] (43 C)
[    6.178675] yenta_cardbus 0000:02:00.0: CardBus bridge found [1014:0512]
[    6.178712] yenta_cardbus 0000:02:00.0: Using INTVAL to route CSC interrupts to PCI
[    6.178722] yenta_cardbus 0000:02:00.0: Routing CardBus interrupts to PCI
[    6.178734] yenta_cardbus 0000:02:00.0: TI: mfunc 0x01d21022, devctl 0x64
[    6.205015] Linux agpgart interface v0.103
[    6.237689] agpgart-intel 0000:00:00.0: Intel i845 Chipset
[    6.245392] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
[    6.245404] e100: Copyright(c) 1999-2006 Intel Corporation
[    6.263501] agpgart-intel 0000:00:00.0: AGP aperture is 64M @ 0xe0000000
[    6.293825] thinkpad_acpi: ThinkPad ACPI Extras v0.24
[    6.293838] thinkpad_acpi: http://ibm-acpi.sf.net/
[    6.293844] thinkpad_acpi: ThinkPad BIOS 1IET58WW (2.01 ), EC unknown
[    6.293851] thinkpad_acpi: WARNING: Outdated ThinkPad BIOS/EC firmware
[    6.293856] thinkpad_acpi: WARNING: This firmware may be missing critical bug fixes and/or important features
[    6.301139] thinkpad_acpi: detected a 8-level brightness capable ThinkPad
[    6.332787] intel_rng: FWH not detected
[    6.334136] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
[    6.345777] cfg80211: Calling CRDA to update world regulatory domain
[    6.346013] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input5
[    6.407235] yenta_cardbus 0000:02:00.0: ISA IRQ mask 0x0438, PCI irq 11
[    6.407250] yenta_cardbus 0000:02:00.0: Socket status: 30000006
[    6.407272] yenta_cardbus 0000:02:00.0: pcmcia: parent PCI bridge window: [io  0x4000-0x8fff]
[    6.407284] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x4000-0x8fff:
[    6.464215] [drm] Initialized drm 1.1.0 20060810
[    6.411769]  excluding 0x4000-0x40ff 0x4400-0x44ff 0x4800-0x48ff 0x4c00-0x4cff 0x8000-0x803f
[    6.476732] yenta_cardbus 0000:02:00.0: pcmcia: parent PCI bridge window: [mem 0xd0200000-0xdfffffff]
[    6.476750] pcmcia_socket pcmcia_socket0: cs: memory probe 0xd0200000-0xdfffffff:
[    6.476764]  excluding 0xd0200000-0xd09fffff 0xd3a00000-0xdc1fffff 0xdfa00000-0xe01fffff
[    6.476832] yenta_cardbus 0000:02:00.0: pcmcia: parent PCI bridge window: [mem 0xf0000000-0xf7ffffff pref]
[    6.476843] pcmcia_socket pcmcia_socket0: cs: memory probe 0xf0000000-0xf7ffffff:
[    6.476880]  excluding 0xf0000000-0xf7ffffff
[    6.489673] yenta_cardbus 0000:02:00.1: CardBus bridge found [1014:0512]
[    6.489711] yenta_cardbus 0000:02:00.1: Using INTVAL to route CSC interrupts to PCI
[    6.489721] yenta_cardbus 0000:02:00.1: Routing CardBus interrupts to PCI
[    6.489733] yenta_cardbus 0000:02:00.1: TI: mfunc 0x01d21022, devctl 0x64
[    6.717191] yenta_cardbus 0000:02:00.1: ISA IRQ mask 0x0438, PCI irq 11
[    6.717206] yenta_cardbus 0000:02:00.1: Socket status: 30000006
[    6.717227] yenta_cardbus 0000:02:00.1: pcmcia: parent PCI bridge window: [io  0x4000-0x8fff]
[    6.717239] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x4000-0x8fff:
[    6.718353]  excluding 0x4000-0x40ff 0x4400-0x44ff 0x4800-0x48ff 0x4c00-0x4cff 0x8000-0x803f
[    6.741144] yenta_cardbus 0000:02:00.1: pcmcia: parent PCI bridge window: [mem 0xd0200000-0xdfffffff]
[    6.741159] pcmcia_socket pcmcia_socket1: cs: memory probe 0xd0200000-0xdfffffff:
[    6.741169]  excluding 0xd0200000-0xd09fffff 0xd3a00000-0xdc1fffff 0xdfa00000-0xe01fffff
[    6.741238] yenta_cardbus 0000:02:00.1: pcmcia: parent PCI bridge window: [mem 0xf0000000-0xf7ffffff pref]
[    6.741248] pcmcia_socket pcmcia_socket1: cs: memory probe 0xf0000000-0xf7ffffff:
[    6.741284]  excluding 0xf0000000-0xf7ffffff
[    6.748766] ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 11
[    6.813233] e100 0000:02:08.0 eth0: addr 0xd0200000, irq 11, MAC addr 00:09:6b:c2:48:a5
[    6.961810] input: PC Speaker as /devices/platform/pcspkr/input/input6
[    7.095902] microcode: CPU0 sig=0xf24, pf=0x8, revision=0xd
[    7.162825] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    7.265288] iTCO_vendor_support: vendor-support=0
[    7.281306] ppdev: user-space parallel port driver
[    7.285722] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
[    7.285805] iTCO_wdt: Found a ICH3-M TCO device (Version=1, TCOBASE=0x1060)
[    7.287495] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    7.547746] psmouse serio1: synaptics: Touchpad model: 1, fw: 5.9, id: 0x2c6ab1, caps: 0x884793/0x0/0x0, board id: 71, fw id: 4797594
[    7.547771] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0
[    7.585960] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input7
[    7.690385] systemd-udevd[108]: renamed network interface eth0 to enp2s8
[    7.798999] snd_intel8x0m 0000:00:1f.6: setting latency timer to 64
[    7.848656] [drm] radeon kernel modesetting enabled.
[    7.848875] checking generic (e8000000 300000) vs hw (e8000000 8000000)
[    7.848884] fb: conflicting fb hw usage radeondrmfb vs VESA VGA - removing generic driver
[    7.848938] Console: switching to colour dummy device 80x25
[    7.853103] snd_intel8x0 0000:00:1f.5: setting latency timer to 64
[    7.856333] [drm] initializing kernel modesetting (RV200 0x1002:0x4C57 0x1014:0x0517).
[    7.856387] [drm] register mmio base: 0xD0100000
[    7.856393] [drm] register mmio size: 65536
[    7.856661] agpgart-intel 0000:00:00.0: AGP 2.0 bridge
[    7.857999] agpgart-intel 0000:00:00.0: putting AGP V2 device into 4x mode
[    7.858043] radeon 0000:01:00.0: putting AGP V2 device into 4x mode
[    7.858081] radeon 0000:01:00.0: GTT: 64M 0xE0000000 - 0xE3FFFFFF
[    7.858102] radeon 0000:01:00.0: VRAM: 128M 0x00000000E8000000 - 0x00000000EFFFFFFF (16M used)
[    7.858572] [drm] Detected VRAM RAM=128M, BAR=128M
[    7.858583] [drm] RAM width 64bits DDR
[    7.858852] [TTM] Zone  kernel: Available graphics memory: 255352 kiB
[    7.858859] [TTM] Initializing pool allocator
[    7.858931] [drm] radeon: 16M of VRAM memory ready
[    7.858940] [drm] radeon: 64M of GTT memory ready.
[    7.865406] radeon 0000:01:00.0: WB disabled
[    7.865428] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x00000000e0000000 and cpu addr 0xe077c000
[    7.865438] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[    7.865443] [drm] Driver supports precise vblank timestamp query.
[    7.865478] [drm] radeon: irq initialized.
[    7.866360] [drm] Loading R100 Microcode
[    8.038208] [drm] radeon: ring at 0x00000000E0001000
[    8.038250] [drm] ring test succeeded in 1 usecs
[    8.038834] [drm] ib test succeeded in 0 usecs
[    8.039518] [drm] Panel ID String: 1024x768                
[    8.039526] [drm] Panel Size 1024x768
[    8.039665] [drm] No TV DAC info found in BIOS
[    8.061066] [drm] radeon legacy LVDS backlight initialized
[    8.061082] [drm] Radeon Display Connectors
[    8.061088] [drm] Connector 0:
[    8.061096] [drm]   VGA-1
[    8.061104] [drm]   DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60
[    8.061109] [drm]   Encoders:
[    8.061114] [drm]     CRT1: INTERNAL_DAC1
[    8.061120] [drm] Connector 1:
[    8.061125] [drm]   DVI-D-1
[    8.061130] [drm]   HPD1
[    8.061138] [drm]   DDC: 0x64 0x64 0x64 0x64 0x64 0x64 0x64 0x64
[    8.061142] [drm]   Encoders:
[    8.061147] [drm]     DFP1: INTERNAL_TMDS1
[    8.061152] [drm] Connector 2:
[    8.061158] [drm]   LVDS-1
[    8.061163] [drm]   Encoders:
[    8.061167] [drm]     LCD1: INTERNAL_LVDS
[    8.061172] [drm] Connector 3:
[    8.061178] [drm]   SVIDEO-1
[    8.061182] [drm]   Encoders:
[    8.061188] [drm]     TV1: INTERNAL_DAC2
[    8.061245] [drm] radeon: power management initialized
[    8.098442] [drm] fb mappable at 0xE8040000
[    8.098453] [drm] vram apper at 0xE8000000
[    8.098458] [drm] size 786432
[    8.098463] [drm] fb depth is 8
[    8.098467] [drm]    pitch is 1024
[    8.098972] fbcon: radeondrmfb (fb0) is primary device
[    8.131773] Console: switching to colour frame buffer device 128x48
[    8.139370] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
[    8.139378] radeon 0000:01:00.0: registered panic notifier
[    8.139397] [drm] Initialized radeon 2.33.0 20080528 for 0000:01:00.0 on minor 0
[    8.222477] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[    8.223074] ieee80211 phy0: hwaddr 00:e0:4c:82:db:31, RTL8187vB (default) V1 + rtl8225z2, rfkill mask 2
[    8.270440] intel8x0_measure_ac97_clock: measured 51228 usecs (2462 samples)
[    8.270453] intel8x0: clocking to 48000
[    8.316773] rtl8187: Customer ID is 0x00
[    8.323888] rtl8187: wireless switch is on
[    8.324041] usbcore: registered new interface driver rtl8187
[    8.347112] systemd-udevd[113]: renamed network interface wlan0 to wlp0s29f1u1
[    8.545012] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x100-0x3af:
[    8.545861]  excluding 0x170-0x177 0x1f0-0x1f7 0x2f8-0x2ff 0x370-0x377
[    8.546547] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x3e0-0x4ff:
[    8.548194] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af:
[    8.549076]  excluding 0x170-0x177 0x1f0-0x1f7 0x2f8-0x2ff 0x370-0x377
[    8.549773] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff:
[    8.551719]  excluding 0x3f0-0x3ff 0x4d0-0x4d7
[    8.552163] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x820-0x8ff:
[    8.552667]  clean.
[    8.552732] pcmcia_socket pcmcia_socket1: cs: IO port probe 0xc00-0xcf7:
[    8.553297]  clean.
[    8.554717]  excluding 0x3f0-0x3ff 0x4d0-0x4d7
[    8.555110] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff:
[    8.555618]  clean.
[    8.555682] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7:
[    8.556247]  clean.
[    8.556324] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff:
[    8.556343]  excluding 0xc0000-0xd3fff 0xdc000-0xfffff
[    8.556433] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff:
[    8.556473]  clean.
[    8.556536] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff:
[    8.556576]  clean.
[    8.556639] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff:
[    8.560461] pcmcia_socket pcmcia_socket1: cs: memory probe 0x0c0000-0x0fffff:
[    8.560484]  excluding 0xc0000-0xd3fff 0xdc000-0xfffff
[    8.560591] pcmcia_socket pcmcia_socket1: cs: memory probe 0xa0000000-0xa0ffffff:
[    8.560632]  clean.
[    8.560696] pcmcia_socket pcmcia_socket1: cs: memory probe 0x60000000-0x60ffffff:
[    8.560736]  clean.
[    8.560800] pcmcia_socket pcmcia_socket1: cs: IO port probe 0xa00-0xaff:
[    8.561100]  excluding 0xa10-0xa17
[    8.563857]  clean.
[    8.958427] Adding 4883756k swap on /dev/sda2.  Priority:-1 extents:1 across:4883756k FS
[    9.763391] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: data=ordered
[   10.277811] IPv6: ADDRCONF(NETDEV_UP): enp2s8: link is not ready
[   10.280228] e100 0000:02:08.0 enp2s8: NIC Link is Up 100 Mbps Full Duplex
[   10.420596] psmouse serio2: alps: Unknown ALPS touchpad: E7=10 00 64, EC=10 00 64
[   10.605760] psmouse serio2: hgpk: ID: 10 00 64
[   11.818732] systemd-logind[171]: Watching system buttons on /dev/input/event3 (Power Button)
[   11.819162] systemd-logind[171]: Watching system buttons on /dev/input/event4 (Video Bus)
[   11.819503] systemd-logind[171]: Watching system buttons on /dev/input/event1 (Lid Switch)
[   11.819892] systemd-logind[171]: Watching system buttons on /dev/input/event2 (Sleep Button)
[   11.820347] systemd-logind[171]: Watching system buttons on /dev/input/event5 (ThinkPad Extra Buttons)
[   11.900274] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
[   12.099093] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input8
[   15.605108] IPv6: ADDRCONF(NETDEV_UP): wlp0s29f1u1: link is not ready
[   15.605148] IPv6: ADDRCONF(NETDEV_CHANGE): enp2s8: link becomes ready
[   65.019422] fuse init (API version 7.22)
[   69.598580] EXT4-fs (sda1): re-mounted. Opts: data=ordered,commit=0
[   69.633512] EXT4-fs (sda3): re-mounted. Opts: data=ordered,commit=0
[  313.006999] e100 0000:02:08.0 enp2s8: NIC Link is Down
[  363.785497] IPv6: ADDRCONF(NETDEV_UP): wlp0s29f1u1: link is not ready
[  366.561091] wlp0s29f1u1: authenticate with 00:1d:7d:74:84:ef
[  366.899428] wlp0s29f1u1: send auth to 00:1d:7d:74:84:ef (try 1/3)
[  366.905391] wlp0s29f1u1: authenticated
[  366.913409] wlp0s29f1u1: associate with 00:1d:7d:74:84:ef (try 1/3)
[  366.917405] wlp0s29f1u1: RX AssocResp from 00:1d:7d:74:84:ef (capab=0x431 status=0 aid=4)
[  366.921398] wlp0s29f1u1: associated
[  366.921476] IPv6: ADDRCONF(NETDEV_CHANGE): wlp0s29f1u1: link becomes ready
[  402.459780] EXT4-fs (sda1): re-mounted. Opts: data=ordered,commit=600
[  402.493439] EXT4-fs (sda3): re-mounted. Opts: data=ordered,commit=600
[  453.446604] EXT4-fs (sda1): re-mounted. Opts: data=ordered,commit=0
[  453.476773] EXT4-fs (sda3): re-mounted. Opts: data=ordered,commit=0
[root@fuck ~]#

Last edited by the dude (2013-08-16 17:25:11)

Lone_Wolf · 2013-08-16 19:52:25

The glxinfo matches what should be there when HW acceleration is active.

[    6.293825] thinkpad_acpi: ThinkPad ACPI Extras v0.24
[    6.293838] thinkpad_acpi: http://ibm-acpi.sf.net/
[    6.293844] thinkpad_acpi: ThinkPad BIOS 1IET58WW (2.01 ), EC unknown
[    6.293851] thinkpad_acpi: WARNING: Outdated ThinkPad BIOS/EC firmware
[    6.293856] thinkpad_acpi: WARNING: This firmware may be missing critical bug fixes and/or important features

These lines suggest your bios may be a bit old/outdated, best check if there are newer versions available.

Your videocard is connected through AGP 4x (max your laptop can handle) , but i don't see anything wrong with it.
There is however 1 thing that's worth checking :

[    8.061245] [drm] radeon: power management initialized

As root, run cat /sys/kernel/debug/dri/0/radeon_pm_info to find out at which speed the gpu is running.

the dude · 2013-08-17 03:32:17

Lone_Wolf wrote:

The glxinfo matches what should be there when HW acceleration is active.
[    6.293825] thinkpad_acpi: ThinkPad ACPI Extras v0.24
[    6.293838] thinkpad_acpi: http://ibm-acpi.sf.net/
[    6.293844] thinkpad_acpi: ThinkPad BIOS 1IET58WW (2.01 ), EC unknown
[    6.293851] thinkpad_acpi: WARNING: Outdated ThinkPad BIOS/EC firmware
[    6.293856] thinkpad_acpi: WARNING: This firmware may be missing critical bug fixes and/or important features
These lines suggest your bios may be a bit old/outdated, best check if there are newer versions available.
Your videocard is connected through AGP 4x (max your laptop can handle) , but i don't see anything wrong with it.
There is however 1 thing that's worth checking :
[    8.061245] [drm] radeon: power management initialized
As root, run cat /sys/kernel/debug/dri/0/radeon_pm_info to find out at which speed the gpu is running.

I'll see if i get a bios update for it..

Output for gpu speed:

[root@fuck ~]# cat /sys/kernel/debug/dri/0/radeon_pm_info
default engine clock: 260000 kHz
current engine clock: 258750 kHz
default memory clock: 183000 kHz
current memory clock: 182250 kHz
[root@fuck ~]#

Last edited by the dude (2013-08-17 03:41:56)

the dude · 2013-08-17 10:13:45

Ok .. I updated the bios to the lasest ... Did not help ;-/

Lone_Wolf · 2013-08-17 10:42:47

Ok, from linux / X /powerrnanagement point of view everything is setup correctly.

That suggests the problem is between cinnamon and the driver.

it might be that cinnamon needs opengl extensions that are not supported by your driver/card combo, glxinfo output would help to determine that.
(Only the part before GLX Visuals matters for this).

You should also check cinnamon settings and see if disabling some graphic effects solves the problem.
Do you have cinnamon extensions installed ? if so, try removing those.

It seems worth a shot to install another WM/DE to see if that is also slow.

the dude · 2013-08-17 17:38:32

Thanks for your help... Marking this as closed .. I have tried different WM/DE and they are all slow, So i'm gunna put this down to an incompatibility with hardware / drivers. Dont want waste any more of peoples time on it..

I have an install running nice now on another laptop..

Cheers ...

Arch Linux

#1 2013-08-16 04:42:59

[Closed] No Video Hardware acceleration / Ati vid / Cinnamon /

#2 2013-08-16 04:45:39

Re: [Closed] No Video Hardware acceleration / Ati vid / Cinnamon /

#3 2013-08-16 04:47:22

Re: [Closed] No Video Hardware acceleration / Ati vid / Cinnamon /

#4 2013-08-16 04:48:04

Re: [Closed] No Video Hardware acceleration / Ati vid / Cinnamon /

#5 2013-08-16 04:48:58

Re: [Closed] No Video Hardware acceleration / Ati vid / Cinnamon /

#6 2013-08-16 04:52:46

Re: [Closed] No Video Hardware acceleration / Ati vid / Cinnamon /

#7 2013-08-16 04:56:43

Re: [Closed] No Video Hardware acceleration / Ati vid / Cinnamon /

#8 2013-08-16 11:36:17

Re: [Closed] No Video Hardware acceleration / Ati vid / Cinnamon /

#9 2013-08-16 14:15:50

Re: [Closed] No Video Hardware acceleration / Ati vid / Cinnamon /

#10 2013-08-16 14:55:13

Re: [Closed] No Video Hardware acceleration / Ati vid / Cinnamon /

#11 2013-08-16 15:03:35

Re: [Closed] No Video Hardware acceleration / Ati vid / Cinnamon /

#12 2013-08-16 15:51:30

Re: [Closed] No Video Hardware acceleration / Ati vid / Cinnamon /

#13 2013-08-16 15:56:34

Re: [Closed] No Video Hardware acceleration / Ati vid / Cinnamon /

#14 2013-08-16 16:14:07

Re: [Closed] No Video Hardware acceleration / Ati vid / Cinnamon /

#15 2013-08-16 16:28:35

Re: [Closed] No Video Hardware acceleration / Ati vid / Cinnamon /

#16 2013-08-16 16:41:20

Re: [Closed] No Video Hardware acceleration / Ati vid / Cinnamon /

#17 2013-08-16 16:53:31

Re: [Closed] No Video Hardware acceleration / Ati vid / Cinnamon /

#18 2013-08-16 19:52:25

Re: [Closed] No Video Hardware acceleration / Ati vid / Cinnamon /

#19 2013-08-17 03:32:17

Re: [Closed] No Video Hardware acceleration / Ati vid / Cinnamon /

#20 2013-08-17 10:13:45

Re: [Closed] No Video Hardware acceleration / Ati vid / Cinnamon /

#21 2013-08-17 10:42:47

Re: [Closed] No Video Hardware acceleration / Ati vid / Cinnamon /

#22 2013-08-17 17:38:32

Re: [Closed] No Video Hardware acceleration / Ati vid / Cinnamon /

Board footer