You are not logged in.

Pages: 1

#1 2013-10-01 17:56:12

unksafi
Member
Registered: 2013-09-30
Posts: 6

[Solved] X doesnt start with GPU (Intel 4000HD)

Hi everyone!
I'm new to the bbs, so this is my first post, but i'm looking forward to be an active member of this community.
I've been using arch for the last 3 years and lovin' it big_smile

Unfortunately the motherboard from my old laptop got ruined so I had to buy a new one: Samsung NP350V5C which came with windows 8.
After digging the wiki I finally could get past the damn UEFI thing and install Arch.

After trying for 1 week to install the dedicated graphics drivers I gave up and tried to install the GPU drivers. An intel 4000HD.

So I followed Intel Graphics Wiki, installed xf86-video-intel, added the line MODULES="i915" to the /etc/mkinitcpio.conf and finally regenerated initramfs by typing: mkinitcpio -p linux.

I'm not sure if I missed any step or if I should do something else.

Here's the log when I do startx

X.Org X Server 1.14.2
Release Date: 2013-06-25
[    18.624] X Protocol Version 11, Revision 0
[    18.624] Build Operating System: Linux 3.9.7-1-ARCH x86_64 
[    18.625] Current Operating System: Linux unksafi 3.11.2-1-ARCH #1 SMP PREEMPT Fri Sep 27 07:35:36 CEST 2013 x86_64
[    18.625] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=cd8e206f-5fee-4680-acb0-12803b0ec10f rw quiet
[    18.625] Build Date: 01 July 2013  10:48:42AM
[    18.625]  
[    18.625] Current version of pixman: 0.30.2
[    18.625]     Before reporting problems, check [url]http://wiki.x.org[/url]
    to make sure that you have the latest version.
[    18.625] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    18.625] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Oct  1 16:21:05 2013
[    18.640] (==) Using config directory: "/etc/X11/xorg.conf.d"
[    18.668] (==) No Layout section.  Using the first Screen section.
[    18.668] (==) No screen section available. Using defaults.
[    18.668] (**) |-->Screen "Default Screen Section" (0)
[    18.668] (**) |   |-->Monitor "<default monitor>"
[    18.668] (==) No device specified for screen "Default Screen Section".
    Using the first device section listed.
[    18.668] (**) |   |-->Device "Intel Graphics"
[    18.668] (==) No monitor specified for screen "Default Screen Section".
    Using a default monitor configuration.
[    18.668] (==) Automatically adding devices
[    18.668] (==) Automatically enabling devices
[    18.668] (==) Automatically adding GPU devices
[    18.700] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[    18.700]     Entry deleted from font path.
[    18.700] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[    18.700]     Entry deleted from font path.
[    18.700] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[    18.700]     Entry deleted from font path.
[    18.700]     (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[    18.700] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[    18.700]     Entry deleted from font path.
[    18.700]     (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[    18.700] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/
[    18.700] (==) ModulePath set to "/usr/lib/xorg/modules"
[    18.700] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
[    18.717] (II) Loader magic: 0x7fdc20
[    18.717] (II) Module ABI versions:
[    18.717]     X.Org ANSI C Emulation: 0.4
[    18.717]     X.Org Video Driver: 14.1
[    18.717]     X.Org XInput driver : 19.1
[    18.717]     X.Org Server Extension : 7.0
[    18.718] (II) xfree86: Adding drm device (/dev/dri/card1)
[    18.718] (II) xfree86: Adding drm device (/dev/dri/card0)
[    18.720] (--) PCI:*(0:0:2:0) 8086:0166:144d:c0d8 rev 9, Mem @ 0xbfc00000/4194304, 0xd0000000/268435456, I/O @ 0x00004000/64
[    18.720] (--) PCI: (0:1:0:0) 1002:6840:144d:c0d8 rev 0, Mem @ 0xe0000000/268435456, 0xc0220000/131072, I/O @ 0x00003000/256, BIOS @ 0x????????/131072
[    18.720] Initializing built-in extension Generic Event Extension
[    18.720] Initializing built-in extension SHAPE
[    18.720] Initializing built-in extension MIT-SHM
[    18.720] Initializing built-in extension XInputExtension
[    18.720] Initializing built-in extension XTEST
[    18.720] Initializing built-in extension BIG-REQUESTS
[    18.720] Initializing built-in extension SYNC
[    18.720] Initializing built-in extension XKEYBOARD
[    18.720] Initializing built-in extension XC-MISC
[    18.720] Initializing built-in extension SECURITY
[    18.720] Initializing built-in extension XINERAMA
[    18.720] Initializing built-in extension XFIXES
[    18.720] Initializing built-in extension RENDER
[    18.721] Initializing built-in extension RANDR
[    18.721] Initializing built-in extension COMPOSITE
[    18.721] Initializing built-in extension DAMAGE
[    18.721] Initializing built-in extension MIT-SCREEN-SAVER
[    18.721] Initializing built-in extension DOUBLE-BUFFER
[    18.721] Initializing built-in extension RECORD
[    18.721] Initializing built-in extension DPMS
[    18.721] Initializing built-in extension X-Resource
[    18.721] Initializing built-in extension XVideo
[    18.721] Initializing built-in extension XVideo-MotionCompensation
[    18.722] Initializing built-in extension XFree86-VidModeExtension
[    18.723] Initializing built-in extension XFree86-DGA
[    18.724] Initializing built-in extension XFree86-DRI
[    18.725] Initializing built-in extension DRI2
[    18.725] (II) LoadModule: "glx"
[    18.735] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    18.743] (II) Module glx: vendor="X.Org Foundation"
[    18.743]     compiled for 1.14.2, module version = 1.0.0
[    18.743]     ABI class: X.Org Server Extension, version 7.0
[    18.743] (==) AIGLX enabled
[    18.744] Loading extension GLX
[    18.744] (II) LoadModule: "intel"
[    18.761] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[    18.795] (II) Module intel: vendor="X.Org Foundation"
[    18.795]     compiled for 1.14.2, module version = 2.21.15
[    18.795]     Module class: X.Org Video Driver
[    18.795]     ABI class: X.Org Video Driver, version 14.1
[    18.795] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
    i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
    915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
    Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
    GM45, 4 Series, G45/G43, Q45/Q43, G41, B43, HD Graphics,
    HD Graphics 2000, HD Graphics 3000, HD Graphics 2500,
    HD Graphics 4000, HD Graphics P4000, HD Graphics 4600,
    HD Graphics 5000, HD Graphics P4600/P4700, Iris(TM) Graphics 5100,
    HD Graphics 4400, HD Graphics 4200, Iris(TM) Pro Graphics 5200
[    18.795] (++) using VT number 1

[    18.798] (II) intel(0): Creating default Display subsection in Screen section
    "Default Screen Section" for depth/fbbpp 24/32
[    18.798] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[    18.798] (==) intel(0): RGB weight 888
[    18.798] (==) intel(0): Default visual is TrueColor
[    18.798] (**) intel(0): Option "DRI" "False"
[    18.798] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics 4000
[    18.798] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx
[    18.799] (**) intel(0): Framebuffer tiled
[    18.799] (**) intel(0): Pixmaps tiled
[    18.799] (**) intel(0): "Tear free" disabled
[    18.799] (**) intel(0): Forcing per-crtc-pixmaps? no
[    18.799] (II) intel(0): Output LVDS1 has no monitor section
[    18.799] (--) intel(0): found backlight control interface acpi_video1 (type 'firmware')
[    18.799] (II) intel(0): Output VGA1 has no monitor section
[    18.799] (II) intel(0): Output HDMI1 has no monitor section
[    18.799] (II) intel(0): Output DP1 has no monitor section
[    18.799] (--) intel(0): Output LVDS1 using initial mode 1366x768 on pipe 0
[    18.799] (==) intel(0): DPI set to (96, 96)
[    18.799] (==) Depth 24 pixmap format is 32 bpp
[    18.815] (II) intel(0): SNA initialized with Ivybridge (gen7, gt2) backend
[    18.815] (==) intel(0): Backing store disabled
[    18.815] (==) intel(0): Silken mouse enabled
[    18.815] (II) intel(0): HW Cursor enabled
[    18.815] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[    18.817] (==) intel(0): DPMS enabled
[    18.817] (==) intel(0): hotplug detection: "enabled"
[    18.817] (--) RandR disabled
[    18.825] (II) AIGLX: Screen 0 is not DRI2 capable
[    18.825] (II) AIGLX: Screen 0 is not DRI capable
[    19.452] (II) AIGLX: Loaded and initialized swrast
[    19.452] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[    19.465] (II) intel(0): switch to mode 1366x768@60.0 on pipe 0 using LVDS1, position (0, 0), rotation normal
[    19.473] (II) intel(0): Setting screen physical size to 361 x 203
[    19.703] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[    19.703] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    19.703] (II) LoadModule: "evdev"
[    19.703] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    19.723] (II) Module evdev: vendor="X.Org Foundation"
[    19.723]     compiled for 1.14.2, module version = 2.8.1
[    19.723]     Module class: X.Org XInput Driver
[    19.723]     ABI class: X.Org XInput driver, version 19.1
[    19.723] (II) Using input driver 'evdev' for 'Power Button'
[    19.723] (**) Power Button: always reports core events
[    19.723] (**) evdev: Power Button: Device: "/dev/input/event2"
[    19.723] (--) evdev: Power Button: Vendor 0 Product 0x1
[    19.723] (--) evdev: Power Button: Found keys
[    19.723] (II) evdev: Power Button: Configuring as keyboard
[    19.723] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[    19.723] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    19.723] (**) Option "xkb_rules" "evdev"
[    19.723] (**) Option "xkb_model" "pc104"
[    19.723] (**) Option "xkb_layout" "us"
[    19.748] (II) config/udev: Adding input device Video Bus (/dev/input/event5)
[    19.748] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    19.748] (II) Using input driver 'evdev' for 'Video Bus'
[    19.748] (**) Video Bus: always reports core events
[    19.748] (**) evdev: Video Bus: Device: "/dev/input/event5"
[    19.748] (--) evdev: Video Bus: Vendor 0 Product 0x6
[    19.748] (--) evdev: Video Bus: Found keys
[    19.748] (II) evdev: Video Bus: Configuring as keyboard
[    19.748] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input5/event5"
[    19.748] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[    19.748] (**) Option "xkb_rules" "evdev"
[    19.748] (**) Option "xkb_model" "pc104"
[    19.748] (**) Option "xkb_layout" "us"
[    19.749] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
[    19.749] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    19.749] (II) Using input driver 'evdev' for 'Video Bus'
[    19.749] (**) Video Bus: always reports core events
[    19.749] (**) evdev: Video Bus: Device: "/dev/input/event4"
[    19.749] (--) evdev: Video Bus: Vendor 0 Product 0x6
[    19.749] (--) evdev: Video Bus: Found keys
[    19.749] (II) evdev: Video Bus: Configuring as keyboard
[    19.749] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:20/LNXVIDEO:00/input/input4/event4"
[    19.749] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[    19.749] (**) Option "xkb_rules" "evdev"
[    19.749] (**) Option "xkb_model" "pc104"
[    19.749] (**) Option "xkb_layout" "us"
[    19.749] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[    19.749] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    19.749] (II) Using input driver 'evdev' for 'Power Button'
[    19.749] (**) Power Button: always reports core events
[    19.749] (**) evdev: Power Button: Device: "/dev/input/event0"
[    19.749] (--) evdev: Power Button: Vendor 0 Product 0x1
[    19.749] (--) evdev: Power Button: Found keys
[    19.749] (II) evdev: Power Button: Configuring as keyboard
[    19.749] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0/event0"
[    19.749] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 9)
[    19.749] (**) Option "xkb_rules" "evdev"
[    19.749] (**) Option "xkb_model" "pc104"
[    19.749] (**) Option "xkb_layout" "us"
[    19.750] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[    19.750] (II) No input driver specified, ignoring this device.
[    19.750] (II) This device may have been added with another device file.
[    19.750] (II) config/udev: Adding drm device (/dev/dri/card1)
[    19.750] (II) config/udev: Adding drm device (/dev/dri/card0)
[    19.750] (II) config/udev: Adding input device WebCam SC-13HDL11939N (/dev/input/event7)
[    19.750] (**) WebCam SC-13HDL11939N: Applying InputClass "evdev keyboard catchall"
[    19.750] (II) Using input driver 'evdev' for 'WebCam SC-13HDL11939N'
[    19.750] (**) WebCam SC-13HDL11939N: always reports core events
[    19.750] (**) evdev: WebCam SC-13HDL11939N: Device: "/dev/input/event7"
[    19.750] (--) evdev: WebCam SC-13HDL11939N: Vendor 0x2232 Product 0x1029
[    19.750] (--) evdev: WebCam SC-13HDL11939N: Found keys
[    19.750] (II) evdev: WebCam SC-13HDL11939N: Configuring as keyboard
[    19.750] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.4/3-1.4:1.0/input/input7/event7"
[    19.750] (II) XINPUT: Adding extended input device "WebCam SC-13HDL11939N" (type: KEYBOARD, id 10)
[    19.750] (**) Option "xkb_rules" "evdev"
[    19.750] (**) Option "xkb_model" "pc104"
[    19.750] (**) Option "xkb_layout" "us"
[    19.751] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event10)
[    19.751] (II) No input driver specified, ignoring this device.
[    19.751] (II) This device may have been added with another device file.
[    19.751] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event8)
[    19.751] (II) No input driver specified, ignoring this device.
[    19.751] (II) This device may have been added with another device file.
[    19.751] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event9)
[    19.751] (II) No input driver specified, ignoring this device.
[    19.751] (II) This device may have been added with another device file.
[    19.751] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event3)
[    19.751] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[    19.751] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[    19.751] (**) AT Translated Set 2 keyboard: always reports core events
[    19.751] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event3"
[    19.751] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[    19.751] (--) evdev: AT Translated Set 2 keyboard: Found keys
[    19.751] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[    19.751] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input3/event3"
[    19.751] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 11)
[    19.751] (**) Option "xkb_rules" "evdev"
[    19.751] (**) Option "xkb_model" "pc104"
[    19.751] (**) Option "xkb_layout" "us"
[    19.752] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event11)
[    19.752] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[    19.752] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[    19.752] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[    19.752] (II) LoadModule: "synaptics"
[    19.752] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[    19.764] (II) Module synaptics: vendor="X.Org Foundation"
[    19.764]     compiled for 1.14.1, module version = 1.7.1
[    19.764]     Module class: X.Org XInput Driver
[    19.764]     ABI class: X.Org XInput driver, version 19.1
[    19.764] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[    19.764] (**) SynPS/2 Synaptics TouchPad: always reports core events
[    19.764] (**) Option "Device" "/dev/input/event11"
[    19.850] (II) synaptics: SynPS/2 Synaptics TouchPad: ignoring touch events for semi-multitouch device
[    19.850] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1210 - 5738 (res 48)
[    19.850] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 986 - 4886 (res 80)
[    19.850] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[    19.850] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[    19.850] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
[    19.850] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[    19.850] (**) Option "TapButton1" "1"
[    19.850] (**) Option "TapButton2" "2"
[    19.850] (**) Option "TapButton3" "3"
[    19.850] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[    19.850] (**) SynPS/2 Synaptics TouchPad: always reports core events
[    19.876] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input11/event11"
[    19.876] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 12)
[    19.876] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[    19.877] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75
[    19.877] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.033
[    19.877] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[    19.877] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[    19.877] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[    19.877] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[    19.877] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[    19.877] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[    19.877] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[    19.878] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
[    19.878] (II) No input driver specified, ignoring this device.
[    19.878] (II) This device may have been added with another device file.
[    20.097] (II) UnloadModule: "synaptics"
[    20.097] (II) evdev: AT Translated Set 2 keyboard: Close
[    20.097] (II) UnloadModule: "evdev"
[    20.097] (II) evdev: WebCam SC-13HDL11939N: Close
[    20.097] (II) UnloadModule: "evdev"
[    20.097] (II) evdev: Power Button: Close
[    20.097] (II) UnloadModule: "evdev"
[    20.097] (II) evdev: Video Bus: Close
[    20.097] (II) UnloadModule: "evdev"
[    20.097] (II) evdev: Video Bus: Close
[    20.097] (II) UnloadModule: "evdev"
[    20.097] (II) evdev: Power Button: Close
[    20.097] (II) UnloadModule: "evdev"
[    20.114] (EE) Server terminated successfully (0). Closing log file.

Also tried

# Xorg :0 -configure
# X -config xorg.conf.new

but this gives me a full black screen which I have to pkill.
This is the log:

 
X.Org X Server 1.14.2
Release Date: 2013-06-25
[   365.333] X Protocol Version 11, Revision 0
[   365.335] Build Operating System: Linux 3.9.7-1-ARCH x86_64 
[   365.336] Current Operating System: Linux unksafi 3.11.2-1-ARCH #1 SMP PREEMPT Fri Sep 27 07:35:36 CEST 2013 x86_64
[   365.336] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=cd8e206f-5fee-4680-acb0-12803b0ec10f rw quiet
[   365.339] Build Date: 01 July 2013  10:48:42AM
[   365.341]  
[   365.343] Current version of pixman: 0.30.2
[   365.346]     Before reporting problems, check [url]http://wiki.x.org[/url]
    to make sure that you have the latest version.
[   365.346] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[   365.351] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Oct  1 16:26:51 2013
[   365.353] (++) Using config file: "xorg.conf.new"
[   365.354] (==) Using config directory: "/etc/X11/xorg.conf.d"
[   365.355] (==) ServerLayout "X.org Configured"
[   365.355] (**) |-->Screen "Screen0" (0)
[   365.355] (**) |   |-->Monitor "Monitor0"
[   365.355] (**) |   |-->Device "Card0"
[   365.355] (**) |-->Input Device "Mouse0"
[   365.355] (**) |-->Input Device "Keyboard0"
[   365.355] (==) Automatically adding devices
[   365.355] (==) Automatically enabling devices
[   365.355] (==) Automatically adding GPU devices
[   365.355] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[   365.355]     Entry deleted from font path.
[   365.355] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[   365.355]     Entry deleted from font path.
[   365.355] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[   365.355]     Entry deleted from font path.
[   365.355]     (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[   365.355] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[   365.355]     Entry deleted from font path.
[   365.355]     (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[   365.355] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[   365.355]     Entry deleted from font path.
[   365.355] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[   365.355]     Entry deleted from font path.
[   365.355] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[   365.355]     Entry deleted from font path.
[   365.355]     (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[   365.355] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[   365.355]     Entry deleted from font path.
[   365.355]     (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[   365.355] (**) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/
[   365.355] (**) ModulePath set to "/usr/lib/xorg/modules"
[   365.355] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[   365.355] (WW) Disabling Mouse0
[   365.355] (WW) Disabling Keyboard0
[   365.355] (II) Loader magic: 0x7fdc20
[   365.355] (II) Module ABI versions:
[   365.355]     X.Org ANSI C Emulation: 0.4
[   365.355]     X.Org Video Driver: 14.1
[   365.355]     X.Org XInput driver : 19.1
[   365.355]     X.Org Server Extension : 7.0
[   365.356] (II) xfree86: Adding drm device (/dev/dri/card1)
[   365.356] (II) xfree86: Adding drm device (/dev/dri/card0)
[   365.357] (--) PCI:*(0:0:2:0) 8086:0166:144d:c0d8 rev 9, Mem @ 0xbfc00000/4194304, 0xd0000000/268435456, I/O @ 0x00004000/64
[   365.357] (--) PCI: (0:1:0:0) 1002:6840:144d:c0d8 rev 0, Mem @ 0xe0000000/268435456, 0xc0220000/131072, I/O @ 0x00003000/256, BIOS @ 0x????????/131072
[   365.359] Initializing built-in extension Generic Event Extension
[   365.360] Initializing built-in extension SHAPE
[   365.361] Initializing built-in extension MIT-SHM
[   365.362] Initializing built-in extension XInputExtension
[   365.364] Initializing built-in extension XTEST
[   365.365] Initializing built-in extension BIG-REQUESTS
[   365.366] Initializing built-in extension SYNC
[   365.368] Initializing built-in extension XKEYBOARD
[   365.369] Initializing built-in extension XC-MISC
[   365.370] Initializing built-in extension SECURITY
[   365.371] Initializing built-in extension XINERAMA
[   365.372] Initializing built-in extension XFIXES
[   365.373] Initializing built-in extension RENDER
[   365.374] Initializing built-in extension RANDR
[   365.375] Initializing built-in extension COMPOSITE
[   365.376] Initializing built-in extension DAMAGE
[   365.377] Initializing built-in extension MIT-SCREEN-SAVER
[   365.378] Initializing built-in extension DOUBLE-BUFFER
[   365.379] Initializing built-in extension RECORD
[   365.380] Initializing built-in extension DPMS
[   365.381] Initializing built-in extension X-Resource
[   365.382] Initializing built-in extension XVideo
[   365.383] Initializing built-in extension XVideo-MotionCompensation
[   365.383] Initializing built-in extension XFree86-VidModeExtension
[   365.384] Initializing built-in extension XFree86-DGA
[   365.385] Initializing built-in extension XFree86-DRI
[   365.386] Initializing built-in extension DRI2
[   365.386] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
[   365.386] (II) LoadModule: "glx"
[   365.386] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[   365.386] (II) Module glx: vendor="X.Org Foundation"
[   365.386]     compiled for 1.14.2, module version = 1.0.0
[   365.386]     ABI class: X.Org Server Extension, version 7.0
[   365.386] (==) AIGLX enabled
[   365.387] Loading extension GLX
[   365.387] (II) LoadModule: "intel"
[   365.387] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[   365.387] (II) Module intel: vendor="X.Org Foundation"
[   365.387]     compiled for 1.14.2, module version = 2.21.15
[   365.387]     Module class: X.Org Video Driver
[   365.387]     ABI class: X.Org Video Driver, version 14.1
[   365.387] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
    i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
    915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
    Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
    GM45, 4 Series, G45/G43, Q45/Q43, G41, B43, HD Graphics,
    HD Graphics 2000, HD Graphics 3000, HD Graphics 2500,
    HD Graphics 4000, HD Graphics P4000, HD Graphics 4600,
    HD Graphics 5000, HD Graphics P4600/P4700, Iris(TM) Graphics 5100,
    HD Graphics 4400, HD Graphics 4200, Iris(TM) Pro Graphics 5200
[   365.388] (--) using VT number 2

[   365.392] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[   365.392] (==) intel(0): RGB weight 888
[   365.392] (==) intel(0): Default visual is TrueColor
[   365.392] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics 4000
[   365.392] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx
[   365.392] (**) intel(0): Framebuffer tiled
[   365.392] (**) intel(0): Pixmaps tiled
[   365.392] (**) intel(0): "Tear free" disabled
[   365.392] (**) intel(0): Forcing per-crtc-pixmaps? no
[   365.392] (II) intel(0): Output LVDS1 using monitor section Monitor0
[   365.392] (--) intel(0): found backlight control interface acpi_video1 (type 'firmware')
[   365.392] (II) intel(0): Output VGA1 has no monitor section
[   365.392] (II) intel(0): Output HDMI1 has no monitor section
[   365.392] (II) intel(0): Output DP1 has no monitor section
[   365.392] (--) intel(0): Output LVDS1 using initial mode 1366x768 on pipe 0
[   365.392] (==) intel(0): DPI set to (96, 96)
[   365.392] (II) Loading sub module "dri2"
[   365.392] (II) LoadModule: "dri2"
[   365.392] (II) Module "dri2" already built-in
[   365.392] (==) Depth 24 pixmap format is 32 bpp
[   365.392] (II) intel(0): SNA initialized with Ivybridge (gen7, gt2) backend
[   365.392] (==) intel(0): Backing store disabled
[   365.392] (==) intel(0): Silken mouse enabled
[   365.393] (II) intel(0): HW Cursor enabled
[   365.393] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[   365.394] (==) intel(0): DPMS enabled
[   365.394] (II) intel(0): [DRI2] Setup complete
[   365.394] (II) intel(0): [DRI2]   DRI driver: i965
[   365.394] (II) intel(0): direct rendering: DRI2 Enabled
[   365.394] (==) intel(0): hotplug detection: "enabled"
[   365.394] (--) RandR disabled
[   365.537] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[   365.537] (II) AIGLX: enabled GLX_INTEL_swap_event
[   365.537] (II) AIGLX: enabled GLX_ARB_create_context
[   365.537] (II) AIGLX: enabled GLX_ARB_create_context_profile
[   365.537] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[   365.537] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[   365.537] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[   365.537] (II) AIGLX: Loaded and initialized i965
[   365.537] (II) GLX: Initialized DRI2 GL provider for screen 0
[   365.539] (II) intel(0): switch to mode 1366x768@60.0 on pipe 0 using LVDS1, position (0, 0), rotation normal
[   365.563] (II) intel(0): Setting screen physical size to 361 x 203
[   365.601] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[   365.601] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[   365.601] (II) LoadModule: "evdev"
[   365.601] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[   365.601] (II) Module evdev: vendor="X.Org Foundation"
[   365.601]     compiled for 1.14.2, module version = 2.8.1
[   365.601]     Module class: X.Org XInput Driver
[   365.601]     ABI class: X.Org XInput driver, version 19.1
[   365.601] (II) Using input driver 'evdev' for 'Power Button'
[   365.601] (**) Power Button: always reports core events
[   365.601] (**) evdev: Power Button: Device: "/dev/input/event2"
[   365.601] (--) evdev: Power Button: Vendor 0 Product 0x1
[   365.601] (--) evdev: Power Button: Found keys
[   365.601] (II) evdev: Power Button: Configuring as keyboard
[   365.602] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[   365.602] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[   365.602] (**) Option "xkb_rules" "evdev"
[   365.602] (**) Option "xkb_model" "pc104"
[   365.602] (**) Option "xkb_layout" "us"
[   365.624] (II) config/udev: Adding input device Video Bus (/dev/input/event5)
[   365.624] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[   365.624] (II) Using input driver 'evdev' for 'Video Bus'
[   365.624] (**) Video Bus: always reports core events
[   365.624] (**) evdev: Video Bus: Device: "/dev/input/event5"
[   365.624] (--) evdev: Video Bus: Vendor 0 Product 0x6
[   365.624] (--) evdev: Video Bus: Found keys
[   365.624] (II) evdev: Video Bus: Configuring as keyboard
[   365.624] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input5/event5"
[   365.624] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[   365.624] (**) Option "xkb_rules" "evdev"
[   365.624] (**) Option "xkb_model" "pc104"
[   365.624] (**) Option "xkb_layout" "us"
[   365.625] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
[   365.625] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[   365.625] (II) Using input driver 'evdev' for 'Video Bus'
[   365.625] (**) Video Bus: always reports core events
[   365.625] (**) evdev: Video Bus: Device: "/dev/input/event4"
[   365.625] (--) evdev: Video Bus: Vendor 0 Product 0x6
[   365.625] (--) evdev: Video Bus: Found keys
[   365.625] (II) evdev: Video Bus: Configuring as keyboard
[   365.625] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:20/LNXVIDEO:00/input/input4/event4"
[   365.625] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[   365.625] (**) Option "xkb_rules" "evdev"
[   365.625] (**) Option "xkb_model" "pc104"
[   365.625] (**) Option "xkb_layout" "us"
[   365.625] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[   365.625] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[   365.625] (II) Using input driver 'evdev' for 'Power Button'
[   365.625] (**) Power Button: always reports core events
[   365.625] (**) evdev: Power Button: Device: "/dev/input/event0"
[   365.625] (--) evdev: Power Button: Vendor 0 Product 0x1
[   365.625] (--) evdev: Power Button: Found keys
[   365.625] (II) evdev: Power Button: Configuring as keyboard
[   365.625] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0/event0"
[   365.625] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 9)
[   365.625] (**) Option "xkb_rules" "evdev"
[   365.625] (**) Option "xkb_model" "pc104"
[   365.625] (**) Option "xkb_layout" "us"
[   365.626] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[   365.626] (II) No input driver specified, ignoring this device.
[   365.626] (II) This device may have been added with another device file.
[   365.626] (II) config/udev: Adding drm device (/dev/dri/card1)
[   365.626] (II) config/udev: Adding drm device (/dev/dri/card0)
[   365.626] (II) config/udev: Adding input device WebCam SC-13HDL11939N (/dev/input/event7)
[   365.626] (**) WebCam SC-13HDL11939N: Applying InputClass "evdev keyboard catchall"
[   365.626] (II) Using input driver 'evdev' for 'WebCam SC-13HDL11939N'
[   365.626] (**) WebCam SC-13HDL11939N: always reports core events
[   365.626] (**) evdev: WebCam SC-13HDL11939N: Device: "/dev/input/event7"
[   365.626] (--) evdev: WebCam SC-13HDL11939N: Vendor 0x2232 Product 0x1029
[   365.626] (--) evdev: WebCam SC-13HDL11939N: Found keys
[   365.626] (II) evdev: WebCam SC-13HDL11939N: Configuring as keyboard
[   365.626] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.4/3-1.4:1.0/input/input7/event7"
[   365.626] (II) XINPUT: Adding extended input device "WebCam SC-13HDL11939N" (type: KEYBOARD, id 10)
[   365.626] (**) Option "xkb_rules" "evdev"
[   365.626] (**) Option "xkb_model" "pc104"
[   365.626] (**) Option "xkb_layout" "us"
[   365.627] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event10)
[   365.627] (II) No input driver specified, ignoring this device.
[   365.627] (II) This device may have been added with another device file.
[   365.627] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event8)
[   365.627] (II) No input driver specified, ignoring this device.
[   365.627] (II) This device may have been added with another device file.
[   365.627] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event9)
[   365.627] (II) No input driver specified, ignoring this device.
[   365.627] (II) This device may have been added with another device file.
[   365.627] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event3)
[   365.627] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[   365.627] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[   365.627] (**) AT Translated Set 2 keyboard: always reports core events
[   365.627] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event3"
[   365.627] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[   365.627] (--) evdev: AT Translated Set 2 keyboard: Found keys
[   365.627] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[   365.627] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input3/event3"
[   365.627] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 11)
[   365.627] (**) Option "xkb_rules" "evdev"
[   365.627] (**) Option "xkb_model" "pc104"
[   365.627] (**) Option "xkb_layout" "us"
[   365.628] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event11)
[   365.628] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[   365.628] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[   365.628] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[   365.628] (II) LoadModule: "synaptics"
[   365.628] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[   365.628] (II) Module synaptics: vendor="X.Org Foundation"
[   365.628]     compiled for 1.14.1, module version = 1.7.1
[   365.628]     Module class: X.Org XInput Driver
[   365.628]     ABI class: X.Org XInput driver, version 19.1
[   365.628] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[   365.628] (**) SynPS/2 Synaptics TouchPad: always reports core events
[   365.628] (**) Option "Device" "/dev/input/event11"
[   365.703] (II) synaptics: SynPS/2 Synaptics TouchPad: ignoring touch events for semi-multitouch device
[   365.703] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1210 - 5738 (res 48)
[   365.703] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 986 - 4886 (res 80)
[   365.703] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[   365.703] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[   365.703] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
[   365.703] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[   365.703] (**) Option "TapButton1" "1"
[   365.703] (**) Option "TapButton2" "2"
[   365.703] (**) Option "TapButton3" "3"
[   365.703] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[   365.703] (**) SynPS/2 Synaptics TouchPad: always reports core events
[   365.730] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input11/event11"
[   365.730] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 12)
[   365.730] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[   365.730] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75
[   365.730] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.033
[   365.730] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[   365.730] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[   365.730] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[   365.730] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[   365.730] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[   365.731] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[   365.731] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[   365.731] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
[   365.731] (II) No input driver specified, ignoring this device.
[   365.731] (II) This device may have been added with another device file.
[   406.850] (II) AIGLX: Suspending AIGLX clients for VT switch
[   409.880] (II) UnloadModule: "synaptics"
[   409.880] (II) evdev: AT Translated Set 2 keyboard: Close
[   409.880] (II) UnloadModule: "evdev"
[   409.880] (II) evdev: WebCam SC-13HDL11939N: Close
[   409.880] (II) UnloadModule: "evdev"
[   409.880] (II) evdev: Power Button: Close
[   409.880] (II) UnloadModule: "evdev"
[   409.880] (II) evdev: Video Bus: Close
[   409.880] (II) UnloadModule: "evdev"
[   409.880] (II) evdev: Video Bus: Close
[   409.880] (II) UnloadModule: "evdev"
[   409.880] (II) evdev: Power Button: Close
[   409.880] (II) UnloadModule: "evdev"
[   409.886] (EE) Server terminated successfully (0). Closing log file.

Either options terminate X "successfully" although none of them starts X correctly.

Do you have any idea on how to resolve this issue?

Thanks you all in advance.

PS: I dont know if this is in the correct area. Move it if necessary. :s

Last edited by unksafi (2013-10-01 22:50:07)

Offline

#2 2013-10-01 18:07:13

karol
Archivist
Registered: 2009-05-06
Posts: 25,440

Re: [Solved] X doesnt start with GPU (Intel 4000HD)

Welcome to Arch Linux forums :-)

Update your system and try again.
What dedicated driver did you try to install, what other hardware apart from that Intel one do you have there.
Do you have any ~/.xinitrc? If so, post it.

Offline

#3 2013-10-01 18:30:24

unksafi
Member
Registered: 2013-09-30
Posts: 6

Re: [Solved] X doesnt start with GPU (Intel 4000HD)

System updated and problem still remains. hmm

00:02.0 VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09)
01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Thames XT [Radeon HD 7670M]

While configuring the whole system, I installed too cinnamon meaning that I added exec gnome-session-cinnamon to .xinitrc.
I tried starting X with AND without .xinitrc and it makes no difference. It replies "Server terminated succesfully" without even starting. sad

Offline

#4 2013-10-01 20:25:56

mr.MikyMaus
Member
From: disabled
Registered: 2006-03-31
Posts: 285

Re: [Solved] X doesnt start with GPU (Intel 4000HD)

This looks more like a session problem, not a hardware one.

try installing some display manager such as LXDM or GDM, start it via systemd and log in through it.

-m.

What happened to Arch's KISS? systemd sure is stupid but I must have missed the simple part ...

... and who is general Failure and why is he reading my harddisk?

Offline

#5 2013-10-01 21:03:39

unksafi
Member
Registered: 2013-09-30
Posts: 6

Re: [Solved] X doesnt start with GPU (Intel 4000HD)

First of all thank you for your help, both karol and mr.MikyMaus.

mr.MikyMaus, what if I dont want a display manager? :s
My configuration on my old laptop was simply lxde and openbox. Each time I logged in I had to do "startx".
If startx doesn't run for itself, its weird running with a DM.

But anyway I will try your solution and post feedback soon.
Thanks smile

Offline

#6 2013-10-01 22:49:43

unksafi
Member
Registered: 2013-09-30
Posts: 6

Re: [Solved] X doesnt start with GPU (Intel 4000HD)

Since the whole case was weird-looking and I had already changed many configurations to match AMD / ati open-source / intel drivers, I thought my Arch could use a fresh install. Because i'm not sure anymore what files I changed.

Anyway, after a fresh install, X works like expected.

Thank you all. big_smile

Offline

#7 2013-10-02 06:16:31

arcon
Member
Registered: 2013-05-27
Posts: 128

Re: [Solved] X doesnt start with GPU (Intel 4000HD)

unksafi wrote:

My configuration on my old laptop was simply lxde and openbox. Each time I logged in I had to do "startx".
If startx doesn't run for itself, its weird running with a DM.

https://wiki.archlinux.org/index.php/Start_X_at_Login

The short cuts are only short because they don't actually go anywhere. -- Trilby
Nothing feels better than being understood -- awayand
A pathetic dreamer smile

Offline

#8 2013-10-02 09:56:28

karol
Archivist
Registered: 2009-05-06
Posts: 25,440

Re: [Solved] X doesnt start with GPU (Intel 4000HD)

arcon wrote:
unksafi wrote:

My configuration on my old laptop was simply lxde and openbox. Each time I logged in I had to do "startx".
If startx doesn't run for itself, its weird running with a DM.

https://wiki.archlinux.org/index.php/Start_X_at_Login


What does it have to do with the issue OP had?
The link you posted is about automatically starting X. unksafi wanted to just make X work :-)
Ah, now I get it :-)
Sorry, arcon.

Last edited by karol (2013-10-02 09:57:59)

Offline

#9 2013-10-02 12:35:10

ANOKNUSA
Member
Registered: 2010-10-22
Posts: 2,141

Re: [Solved] X doesnt start with GPU (Intel 4000HD)

Get rid of the Xorg.conf file; it's almost always unnecessary these days.  The lower half of your "startx" output is complaining that no input driver can be found for your system; install xf86-input-synaptics, and see if that helps.

Linux != Windows  ::  Ask Questions the Smart Way  ::  Configs

Offline

#10 2013-10-02 13:45:54

unksafi
Member
Registered: 2013-09-30
Posts: 6

Re: [Solved] X doesnt start with GPU (Intel 4000HD)

arcon wrote:
unksafi wrote:

My configuration on my old laptop was simply lxde and openbox. Each time I logged in I had to do "startx".
If startx doesn't run for itself, its weird running with a DM.

https://wiki.archlinux.org/index.php/Start_X_at_Login

I was not complaining that I had to do it, I was just saying that I did.
But thank you anyway smile

ANOKNUSA wrote:

Get rid of the Xorg.conf file; it's almost always unnecessary these days.  The lower half of your "startx" output is complaining that no input driver can be found for your system; install xf86-input-synaptics, and see if that helps.

I already had that on my old install...
But nevermind, my new install is running just fine and I'm still trying to figure which DE/WM to choose. I'm not sure if I should go with tiling windows (doesn't seem really "workable") or the regular DE (cinnamon/mate/lxde).

Offline

Pages: 1

Board footer

Powered by FluxBB