[SOLVED] hibernate fails on second time

xinit · 2013-10-10 11:21:18

systemctl hibernate only works once. If I hibernate the system a second time, the system boots but my monitor stays black (switches into powersave).

dmesg output of first hibernation: (which works fine and restores the system as expected)

[  112.811559] PM: Hibernation mode set to 'platform'
[  112.811919] PM: Marking nosave pages: [mem 0x0009d000-0x000fffff]
[  112.811922] PM: Marking nosave pages: [mem 0xa9ba4000-0xa9baafff]
[  112.811923] PM: Marking nosave pages: [mem 0xaa3e6000-0xaa650fff]
[  112.811929] PM: Marking nosave pages: [mem 0xba3d3000-0xbaffefff]
[  112.811958] PM: Marking nosave pages: [mem 0xbb000000-0xffffffff]
[  112.812470] PM: Basic memory bitmaps created
[  112.812470] PM: Syncing filesystems ... done.
[  113.927862] Freezing user space processes ... (elapsed 0.001 seconds) done.
[  113.928950] PM: Preallocating image memory... done (allocated 132947 pages)
[  114.042077] PM: Allocated 531788 kbytes in 0.11 seconds (4834.43 MB/s)
[  114.042079] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[  114.043386] Suspending console(s) (use no_console_suspend to debug)
[  114.043743] parport_pc 00:09: disabled
[  114.043849] serial 00:08: disabled
[  114.044515] mei_me 0000:00:16.0: suspend
[  114.271931] PM: freeze of devices complete after 228.358 msecs
[  114.272039] PM: late freeze of devices complete after 0.107 msecs
[  114.272441] PM: noirq freeze of devices complete after 0.400 msecs
[  114.272658] ACPI: Preparing to enter system sleep state S4
[  114.272884] PM: Saving platform NVS memory
[  114.273306] Disabling non-boot CPUs ...
[  114.274467] smpboot: CPU 1 is now offline
[  114.275809] smpboot: CPU 2 is now offline
[  114.378656] smpboot: CPU 3 is now offline
[  114.378900] PM: Creating hibernation image:
[  114.473483] PM: Need to copy 131761 pages
[  114.473485] PM: Normal pages needed: 131761 + 1024, available pages: 1934252
[  114.379533] PM: Restoring platform NVS memory
[  114.379927] Enabling non-boot CPUs ...
[  114.379952] smpboot: Booting Node 0 Processor 1 APIC 0x2
[  114.393978] Intel pstate controlling: cpu 1
[  114.394013] CPU1 is up
[  114.394024] smpboot: Booting Node 0 Processor 2 APIC 0x4
[  114.408059] Intel pstate controlling: cpu 2
[  114.408091] CPU2 is up
[  114.408101] smpboot: Booting Node 0 Processor 3 APIC 0x6
[  114.422142] Intel pstate controlling: cpu 3
[  114.422173] CPU3 is up
[  114.424809] ACPI: Waking up from system sleep state S4
[  114.463522] PM: noirq restore of devices complete after 38.323 msecs
[  114.463653] PM: early restore of devices complete after 0.111 msecs
[  114.495451] i915 0000:00:02.0: setting latency timer to 64
[  114.495455] [drm:hsw_unclaimed_reg_clear] *ERROR* Unknown unclaimed register before writing to a090
[  114.495494] xhci_hcd 0000:00:14.0: setting latency timer to 64
[  114.495502] usb usb3: root hub lost power or was reset
[  114.495503] usb usb4: root hub lost power or was reset
[  114.495542] snd_hda_intel 0000:00:03.0: irq 44 for MSI/MSI-X
[  114.495596] mei_me 0000:00:16.0: irq 42 for MSI/MSI-X
[  114.495627] xhci_hcd 0000:00:14.0: irq 45 for MSI/MSI-X
[  114.495628] ehci-pci 0000:00:1a.0: setting latency timer to 64
[  114.495642] usb usb1: root hub lost power or was reset
[  114.495707] ehci-pci 0000:00:1d.0: setting latency timer to 64
[  114.495749] snd_hda_intel 0000:00:1b.0: irq 48 for MSI/MSI-X
[  114.495772] ahci 0000:00:1f.2: setting latency timer to 64
[  114.496522] pci 0000:03:00.0: setting latency timer to 64
[  114.496917] serial 00:08: activated
[  114.497210] parport_pc 00:09: activated
[  114.498298] usb usb2: root hub lost power or was reset
[  114.499530] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[  114.502208] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[  114.638190] r8169 0000:02:00.0 eth0: link down
[  114.810087] usb 1-1: reset high-speed USB device number 2 using ehci-pci
[  114.816745] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[  114.817709] ata3.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[  114.817710] ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[  114.817711] ata3.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[  114.819185] ata3.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[  114.819187] ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[  114.819188] ata3.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[  114.819862] ata3.00: configured for UDMA/133
[  114.819898] sd 2:0:0:0: [sdb] Starting disk
[  114.823415] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[  114.845083] ata1.00: configured for UDMA/133
[  114.845136] sd 0:0:0:0: [sda] Starting disk
[  115.040287] usb 2-1: reset high-speed USB device number 2 using ehci-pci
[  115.323877] usb 3-6: reset full-speed USB device number 3 using xhci_hcd
[  115.338185] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88023135a380
[  115.338186] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88023135a080
[  115.497408] usb 3-5: reset full-speed USB device number 2 using xhci_hcd
[  115.514642] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802312c65c0
[  115.514643] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802312c6500
[  115.517929] usbfs 3-5:1.1: no reset_resume for driver usbfs?
[  115.518071] PM: restore of devices complete after 1021.819 msecs
[  115.528194] input: Microsoft Microsoft® SiderWinderTM X4 Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-5/3-5:1.1/input/input19
[  115.528378] hid-generic 0003:045E:0768.0005: input,hidraw1: USB HID v1.11 Keyboard [Microsoft Microsoft® SiderWinderTM X4 Keyboard] on usb-0000:00:14.0-5/input1
[  115.528586] PM: Image restored successfully.
[  115.528587] Restarting tasks ... done.
[  115.528719] PM: Basic memory bitmaps freed
[  115.528722] video LNXVIDEO:00: Restoring backlight state
[  115.528888] usb 3-5: usbfs: process 425 (x4daemon) did not claim interface 1 before use
[  115.528971] usb 3-5: usbfs: process 425 (x4daemon) did not claim interface 1 before use
[  115.557433] usb 3-5: usbfs: process 425 (x4daemon) did not claim interface 1 before use
[  116.148173] r8169 0000:02:00.0 eth0: link up
[  116.431477] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[  205.609276] input: x4daemon as /devices/virtual/input/input20

dmesg output of second hibernation (which fails on boot)

[  262.951717] PM: Hibernation mode set to 'platform'
[  262.951974] PM: Marking nosave pages: [mem 0x0009d000-0x000fffff]
[  262.951977] PM: Marking nosave pages: [mem 0xa9ba4000-0xa9baafff]
[  262.951978] PM: Marking nosave pages: [mem 0xaa3e6000-0xaa650fff]
[  262.951984] PM: Marking nosave pages: [mem 0xba3d3000-0xbaffefff]
[  262.952013] PM: Marking nosave pages: [mem 0xbb000000-0xffffffff]
[  262.952525] PM: Basic memory bitmaps created
[  262.952526] PM: Syncing filesystems ... done.
[  263.574602] Freezing user space processes ... (elapsed 0.001 seconds) done.
[  263.575715] PM: Preallocating image memory... done (allocated 146668 pages)
[  263.690229] PM: Allocated 586672 kbytes in 0.11 seconds (5333.38 MB/s)
[  263.690231] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[  263.691536] Suspending console(s) (use no_console_suspend to debug)
[  263.691880] parport_pc 00:09: disabled
[  263.692007] serial 00:08: disabled
[  263.692128] mei_me 0000:00:16.0: suspend
[  263.920369] PM: freeze of devices complete after 228.645 msecs
[  263.920480] PM: late freeze of devices complete after 0.110 msecs
[  263.920885] PM: noirq freeze of devices complete after 0.403 msecs
[  263.921103] ACPI: Preparing to enter system sleep state S4
[  263.921328] PM: Saving platform NVS memory
[  263.921756] Disabling non-boot CPUs ...
[  264.023763] smpboot: CPU 1 is now offline
[  264.127168] smpboot: CPU 2 is now offline
[  264.230584] smpboot: CPU 3 is now offline
[  264.230834] PM: Creating hibernation image:
[  264.324973] PM: Need to copy 146045 pages
[  264.324975] PM: Normal pages needed: 146045 + 1024, available pages: 1919967
[  264.231469] PM: Restoring platform NVS memory
[  264.231865] Enabling non-boot CPUs ...
[  264.231890] smpboot: Booting Node 0 Processor 1 APIC 0x2
[  264.245912] Intel pstate controlling: cpu 1
[  264.245949] CPU1 is up
[  264.245961] smpboot: Booting Node 0 Processor 2 APIC 0x4
[  264.259995] Intel pstate controlling: cpu 2
[  264.260025] CPU2 is up
[  264.260035] smpboot: Booting Node 0 Processor 3 APIC 0x6
[  264.274073] Intel pstate controlling: cpu 3
[  264.274103] CPU3 is up
[  264.276740] ACPI: Waking up from system sleep state S4
[  264.315455] PM: noirq restore of devices complete after 38.324 msecs
[  264.315585] PM: early restore of devices complete after 0.110 msecs
[  264.348746] i915 0000:00:02.0: setting latency timer to 64
[  264.348753] [drm:hsw_unclaimed_reg_clear] *ERROR* Unknown unclaimed register before writing to a090
[  264.348754] xhci_hcd 0000:00:14.0: setting latency timer to 64
[  264.348763] usb usb3: root hub lost power or was reset
[  264.348763] usb usb4: root hub lost power or was reset
[  264.348811] snd_hda_intel 0000:00:03.0: irq 42 for MSI/MSI-X
[  264.349478] xhci_hcd 0000:00:14.0: irq 44 for MSI/MSI-X
[  264.349532] mei_me 0000:00:16.0: irq 45 for MSI/MSI-X
[  264.349552] ehci-pci 0000:00:1a.0: setting latency timer to 64
[  264.349568] usb usb1: root hub lost power or was reset
[  264.349616] snd_hda_intel 0000:00:1b.0: irq 48 for MSI/MSI-X
[  264.350406] ehci-pci 0000:00:1d.0: setting latency timer to 64
[  264.350421] usb usb2: root hub lost power or was reset
[  264.351391] ahci 0000:00:1f.2: setting latency timer to 64
[  264.353200] pci 0000:03:00.0: setting latency timer to 64
[  264.353459] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[  264.353612] serial 00:08: activated
[  264.353995] parport_pc 00:09: activated
[  264.354308] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[  264.391806] [drm:intel_ddi_pll_mode_set] *ERROR* No WRPLLs available!
[  264.391810] ------------[ cut here ]------------
[  264.391821] WARNING: CPU: 2 PID: 661 at drivers/gpu/drm/i915/intel_display.c:8222 intel_modeset_check_state+0x61d/0x770 [i915]()
[  264.391822] encoder's hw state doesn't match sw tracking (expected 1, found 0)
[  264.391838] Modules linked in: fuse snd_hda_codec_hdmi uinput it87 hwmon_vid coretemp iTCO_wdt iTCO_vendor_support ppdev psmouse serio_raw evdev i2c_i801 r8169 mii fan thermal snd_hda_codec_realtek i915 intel_agp intel_gtt drm_kms_helper snd_hda_intel snd_hda_codec drm snd_hwdep snd_pcm i2c_algo_bit i2c_core mperf snd_page_alloc snd_timer snd mei_me parport_pc mei soundcore lpc_ich parport processor video button ext4 crc16 mbcache jbd2 hid_generic usbhid hid sd_mod ahci libahci libata ehci_pci xhci_hcd ehci_hcd scsi_mod usbcore usb_common
[  264.391840] CPU: 2 PID: 661 Comm: kworker/u8:76 Not tainted 3.11.4-1-P1 #1
[  264.391840] Hardware name: Gigabyte Technology Co., Ltd. H87-HD3/H87-HD3, BIOS F3 05/09/2013
[  264.391843] Workqueue: events_unbound async_run_entry_fn
[  264.391845]  0000000000000009 ffff880221f89b70 ffffffff814da85d ffff880221f89bb8
[  264.391846]  ffff880221f89ba8 ffffffff8106192d ffff880221f89c2c 0000000000000001
[  264.391847]  ffff88022dc5d800 ffff88022dc5dc88 ffff8802321ed800 ffff880221f89c08
[  264.391847] Call Trace:
[  264.391851]  [<ffffffff814da85d>] dump_stack+0x54/0x8d
[  264.391854]  [<ffffffff8106192d>] warn_slowpath_common+0x7d/0xa0
[  264.391855]  [<ffffffff8106199c>] warn_slowpath_fmt+0x4c/0x50
[  264.391861]  [<ffffffffa05d3c58>] ? intel_ddi_get_hw_state+0x38/0x160 [i915]
[  264.391865]  [<ffffffffa05cc93d>] intel_modeset_check_state+0x61d/0x770 [i915]
[  264.391869]  [<ffffffffa05cf6cd>] intel_modeset_setup_hw_state+0x83d/0xad0 [i915]
[  264.391872]  [<ffffffff814dea42>] ? mutex_lock+0x12/0x30
[  264.391874]  [<ffffffffa0597257>] __i915_drm_thaw+0x117/0x1b0 [i915]
[  264.391877]  [<ffffffffa059768f>] i915_resume+0x6f/0xb0 [i915]
[  264.391880]  [<ffffffffa05976e6>] i915_pm_resume+0x16/0x20 [i915]
[  264.391882]  [<ffffffff812b4f24>] pci_pm_restore+0x64/0xb0
[  264.391883]  [<ffffffff812b4ec0>] ? pci_pm_suspend_noirq+0x1a0/0x1a0
[  264.391886]  [<ffffffff8137ff34>] dpm_run_callback+0x44/0x90
[  264.391887]  [<ffffffff813806b6>] device_resume+0xc6/0x1f0
[  264.391889]  [<ffffffff813807fd>] async_resume+0x1d/0x50
[  264.391890]  [<ffffffff8108a907>] async_run_entry_fn+0x37/0x130
[  264.391892]  [<ffffffff8107c637>] process_one_work+0x167/0x450
[  264.391893]  [<ffffffff8107cff1>] worker_thread+0x121/0x3a0
[  264.391894]  [<ffffffff8107ced0>] ? manage_workers.isra.23+0x2b0/0x2b0
[  264.391896]  [<ffffffff81083730>] kthread+0xc0/0xd0
[  264.391897]  [<ffffffff81083670>] ? kthread_create_on_node+0x120/0x120
[  264.391898]  [<ffffffff814e932c>] ret_from_fork+0x7c/0xb0
[  264.391900]  [<ffffffff81083670>] ? kthread_create_on_node+0x120/0x120
[  264.391901] ---[ end trace 0ffe1c4b212bde16 ]---
[  264.391901] ------------[ cut here ]------------
[  264.391906] WARNING: CPU: 2 PID: 661 at drivers/gpu/drm/i915/intel_display.c:8268 check_crtc_state+0x914/0x9c0 [i915]()
[  264.391906] crtc's computed active state doesn't match tracked active state (expected 1, found 0)
[  264.391917] Modules linked in: fuse snd_hda_codec_hdmi uinput it87 hwmon_vid coretemp iTCO_wdt iTCO_vendor_support ppdev psmouse serio_raw evdev i2c_i801 r8169 mii fan thermal snd_hda_codec_realtek i915 intel_agp intel_gtt drm_kms_helper snd_hda_intel snd_hda_codec drm snd_hwdep snd_pcm i2c_algo_bit i2c_core mperf snd_page_alloc snd_timer snd mei_me parport_pc mei soundcore lpc_ich parport processor video button ext4 crc16 mbcache jbd2 hid_generic usbhid hid sd_mod ahci libahci libata ehci_pci xhci_hcd ehci_hcd scsi_mod usbcore usb_common
[  264.391918] CPU: 2 PID: 661 Comm: kworker/u8:76 Tainted: G        W    3.11.4-1-P1 #1
[  264.391918] Hardware name: Gigabyte Technology Co., Ltd. H87-HD3/H87-HD3, BIOS F3 05/09/2013
[  264.391920] Workqueue: events_unbound async_run_entry_fn
[  264.391921]  0000000000000009 ffff880221f898c8 ffffffff814da85d ffff880221f89910
[  264.391922]  ffff880221f89900 ffffffff8106192d 0000000000000001 0000000000000001
[  264.391923]  ffff88022dc5d800 ffff880231b06000 ffff88022dc5dca0 ffff880221f89960
[  264.391923] Call Trace:
[  264.391925]  [<ffffffff814da85d>] dump_stack+0x54/0x8d
[  264.391926]  [<ffffffff8106192d>] warn_slowpath_common+0x7d/0xa0
[  264.391927]  [<ffffffff8106199c>] warn_slowpath_fmt+0x4c/0x50
[  264.391931]  [<ffffffffa05c2094>] check_crtc_state+0x914/0x9c0 [i915]
[  264.391933]  [<ffffffff81083670>] ? kthread_create_on_node+0x120/0x120
[  264.391937]  [<ffffffffa05cc5e3>] intel_modeset_check_state+0x2c3/0x770 [i915]
[  264.391940]  [<ffffffffa05cf6cd>] intel_modeset_setup_hw_state+0x83d/0xad0 [i915]
[  264.391942]  [<ffffffff814dea42>] ? mutex_lock+0x12/0x30
[  264.391945]  [<ffffffffa0597257>] __i915_drm_thaw+0x117/0x1b0 [i915]
[  264.391947]  [<ffffffffa059768f>] i915_resume+0x6f/0xb0 [i915]
[  264.391950]  [<ffffffffa05976e6>] i915_pm_resume+0x16/0x20 [i915]
[  264.391951]  [<ffffffff812b4f24>] pci_pm_restore+0x64/0xb0
[  264.391952]  [<ffffffff812b4ec0>] ? pci_pm_suspend_noirq+0x1a0/0x1a0
[  264.391953]  [<ffffffff8137ff34>] dpm_run_callback+0x44/0x90
[  264.391955]  [<ffffffff813806b6>] device_resume+0xc6/0x1f0
[  264.391956]  [<ffffffff813807fd>] async_resume+0x1d/0x50
[  264.391957]  [<ffffffff8108a907>] async_run_entry_fn+0x37/0x130
[  264.391958]  [<ffffffff8107c637>] process_one_work+0x167/0x450
[  264.391959]  [<ffffffff8107cff1>] worker_thread+0x121/0x3a0
[  264.391960]  [<ffffffff8107ced0>] ? manage_workers.isra.23+0x2b0/0x2b0
[  264.391962]  [<ffffffff81083730>] kthread+0xc0/0xd0
[  264.391963]  [<ffffffff81083670>] ? kthread_create_on_node+0x120/0x120
[  264.391964]  [<ffffffff814e932c>] ret_from_fork+0x7c/0xb0
[  264.391965]  [<ffffffff81083670>] ? kthread_create_on_node+0x120/0x120
[  264.391966] ---[ end trace 0ffe1c4b212bde17 ]---
[  264.500129] r8169 0000:02:00.0 eth0: link down
[  264.665371] usb 2-1: reset high-speed USB device number 2 using ehci-pci
[  264.672045] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[  264.673036] ata3.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[  264.673037] ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[  264.673038] ata3.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[  264.674530] ata3.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[  264.674532] ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[  264.674532] ata3.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[  264.675206] ata3.00: configured for UDMA/133
[  264.675279] sd 2:0:0:0: [sdb] Starting disk
[  264.678714] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[  264.700767] ata1.00: configured for UDMA/133
[  264.700811] sd 0:0:0:0: [sda] Starting disk
[  264.895557] usb 1-1: reset high-speed USB device number 2 using ehci-pci
[  265.179173] usb 3-6: reset full-speed USB device number 3 using xhci_hcd
[  265.193458] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88023135a380
[  265.193459] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88023135a080
[  265.352656] usb 3-5: reset full-speed USB device number 2 using xhci_hcd
[  265.369842] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802312c65c0
[  265.369843] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802312c6500
[  265.373189] usbfs 3-5:1.1: no reset_resume for driver usbfs?
[  265.373298] PM: restore of devices complete after 1023.758 msecs
[  265.383545] input: Microsoft Microsoft® SiderWinderTM X4 Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-5/3-5:1.1/input/input21
[  265.383726] hid-generic 0003:045E:0768.0006: input,hidraw1: USB HID v1.11 Keyboard [Microsoft Microsoft® SiderWinderTM X4 Keyboard] on usb-0000:00:14.0-5/input1
[  265.383937] PM: Image restored successfully.
[  265.383938] Restarting tasks ... done.
[  265.384140] PM: Basic memory bitmaps freed
[  265.384144] video LNXVIDEO:00: Restoring backlight state
[  265.385952] usb 3-5: usbfs: process 849 (x4daemon) did not claim interface 1 before use
[  265.386026] usb 3-5: usbfs: process 849 (x4daemon) did not claim interface 1 before use

Mainboard: Gigabyte H87-HD3
CPU: Intel 4560 (Haswell)
Kernel: 3.12.1-1-ARCH

Any further informations needed?

Last edited by xinit (2014-02-02 14:03:10)

b3nmore · 2013-11-29 17:04:19

Hi,

have you made any progress yet? I've been hit by the same issue on a Asus B85M-G with an i5-4570S: after second resume no video output, but ssh works. FYI I filed a bug on Launchpad , as I'm using xubuntu.
I realy would like to get hibernation working, so any further insights are highly appreciated .

xinit · 2014-02-02 14:02:47

Hey,

this issue does not appear for me anymore, using 3.12.9-2-ARCH.
Did not tested hibernation for long time...

Arch Linux

#1 2013-10-10 11:21:18

[SOLVED] hibernate fails on second time

#2 2013-11-29 17:04:19

Re: [SOLVED] hibernate fails on second time

#3 2014-02-02 14:02:47

Re: [SOLVED] hibernate fails on second time

Board footer