You are not logged in.

#26 2013-10-23 17:47:59

karol
Archivist
Registered: 2009-05-06
Posts: 25,440

Re: [Solved] Xserver Runlevel Confusion

halimbo wrote:

The screen goes black while booting Arch (Debian too)

Okay, so how can I check that the Intel driver is loaded an not the  Vesa driver?

Are you booting to the tty or straight to X?
Check /var/log/Xorg.0.log.

Offline

#27 2013-10-23 21:01:13

halimbo
Member
From: Krefeld, Germany
Registered: 2013-10-23
Posts: 74

Re: [Solved] Xserver Runlevel Confusion

I'm booting to console.

Here's the interesting part of the log output:

[    49.336] 
X.Org X Server 1.14.3
Release Date: 2013-09-12
[    49.345] X Protocol Version 11, Revision 0
[    49.349] Build Operating System: Linux 3.11.1-1-ARCH x86_64 
[    49.353] Current Operating System: Linux hp 3.11.6-1-ARCH #1 SMP PREEMPT Fri Oct 18 23:22:36 CEST 2013 x86_64
[    49.353] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=a06ac9bb-70a4-41e1-afe3-61fba8243bc6 rw i915.modeset=0
[    49.361] Build Date: 08 October 2013  08:48:10PM
[    49.365]  
[    49.369] Current version of pixman: 0.30.2
[    49.378] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[    49.378] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    49.399] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Oct 23 20:28:59 2013
[    49.432] (==) Using config file: "/etc/X11/xorg.conf"
[    49.437] (==) Using config directory: "/etc/X11/xorg.conf.d"
[    49.473] (==) No Layout section.  Using the first Screen section.
[    49.473] (==) No screen section available. Using defaults.
[    49.473] (**) |-->Screen "Default Screen Section" (0)
[    49.473] (**) |   |-->Monitor "<default monitor>"
[    49.474] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[    49.474] (==) Automatically adding devices
[    49.474] (==) Automatically enabling devices
[    49.474] (==) Automatically adding GPU devices
[    49.542] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[    49.542] 	Entry deleted from font path.
[    49.542] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[    49.542] 	Entry deleted from font path.
[    49.542] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[    49.542] 	Entry deleted from font path.
[    49.542] 	(Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[    49.542] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[    49.542] 	Entry deleted from font path.
[    49.542] 	(Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[    49.542] (==) FontPath set to:
	/usr/share/fonts/misc/,
	/usr/share/fonts/TTF/
[    49.542] (==) ModulePath set to "/usr/lib/xorg/modules"
[    49.542] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[    49.542] (II) Loader magic: 0x7fdc20
[    49.542] (II) Module ABI versions:
[    49.542] 	X.Org ANSI C Emulation: 0.4
[    49.542] 	X.Org Video Driver: 14.1
[    49.542] 	X.Org XInput driver : 19.1
[    49.542] 	X.Org Server Extension : 7.0
[    49.543] (II) xfree86: Adding drm device (/dev/dri/card0)
[    49.546] (--) PCI:*(0:0:2:0) 8086:27a2:103c:30aa rev 3, Mem @ 0xe8400000/524288, 0xd0000000/268435456, 0xe8480000/262144, I/O @ 0x00006000/8
[    49.546] (--) PCI: (0:0:2:1) 8086:27a6:103c:30aa rev 3, Mem @ 0xe8500000/524288
[    49.552] Initializing built-in extension Generic Event Extension
[    49.558] Initializing built-in extension SHAPE
[    49.563] Initializing built-in extension MIT-SHM
[    49.569] Initializing built-in extension XInputExtension
[    49.575] Initializing built-in extension XTEST
[    49.581] Initializing built-in extension BIG-REQUESTS
[    49.587] Initializing built-in extension SYNC
[    49.593] Initializing built-in extension XKEYBOARD
[    49.599] Initializing built-in extension XC-MISC
[    49.605] Initializing built-in extension SECURITY
[    49.611] Initializing built-in extension XINERAMA
[    49.617] Initializing built-in extension XFIXES
[    49.623] Initializing built-in extension RENDER
[    49.629] Initializing built-in extension RANDR
[    49.636] Initializing built-in extension COMPOSITE
[    49.642] Initializing built-in extension DAMAGE
[    49.648] Initializing built-in extension MIT-SCREEN-SAVER
[    49.655] Initializing built-in extension DOUBLE-BUFFER
[    49.661] Initializing built-in extension RECORD
[    49.668] Initializing built-in extension DPMS
[    49.674] Initializing built-in extension X-Resource
[    49.681] Initializing built-in extension XVideo
[    49.687] Initializing built-in extension XVideo-MotionCompensation
[    49.694] Initializing built-in extension XFree86-VidModeExtension
[    49.701] Initializing built-in extension XFree86-DGA
[    49.708] Initializing built-in extension XFree86-DRI
[    49.715] Initializing built-in extension DRI2
[    49.715] (II) LoadModule: "glx"
[    49.762] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    49.788] (II) Module glx: vendor="X.Org Foundation"
[    49.789] 	compiled for 1.14.3, module version = 1.0.0
[    49.789] 	ABI class: X.Org Server Extension, version 7.0
[    49.789] (==) AIGLX enabled
[    49.796] Loading extension GLX
[    49.796] (==) Matched intel as autoconfigured driver 0
[    49.796] (==) Matched intel as autoconfigured driver 1
[    49.796] (==) Matched vesa as autoconfigured driver 2
[    49.796] (==) Matched modesetting as autoconfigured driver 3
[    49.796] (==) Matched fbdev as autoconfigured driver 4
[    49.796] (==) Assigned the driver to the xf86ConfigLayout
[    49.796] (II) LoadModule: "intel"
[    49.796] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[    49.882] (II) Module intel: vendor="X.Org Foundation"
[    49.882] 	compiled for 1.14.2, module version = 2.21.15
[    49.882] 	Module class: X.Org Video Driver
[    49.882] 	ABI class: X.Org Video Driver, version 14.1
[    49.882] (II) LoadModule: "vesa"
[    49.882] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    49.888] (II) Module vesa: vendor="X.Org Foundation"
[    49.888] 	compiled for 1.14.0, module version = 2.3.2
[    49.888] 	Module class: X.Org Video Driver
[    49.888] 	ABI class: X.Org Video Driver, version 14.1
[    49.888] (II) LoadModule: "modesetting"
[    49.888] (WW) Warning, couldn't open module modesetting
[    49.888] (II) UnloadModule: "modesetting"
[    49.888] (II) Unloading modesetting
[    49.888] (EE) Failed to load module "modesetting" (module does not exist, 0)
[    49.888] (II) LoadModule: "fbdev"
[    49.889] (WW) Warning, couldn't open module fbdev
[    49.889] (II) UnloadModule: "fbdev"
[    49.889] (II) Unloading fbdev
[    49.889] (EE) Failed to load module "fbdev" (module does not exist, 0)
[    49.889] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
	i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
	915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
	Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
	GM45, 4 Series, G45/G43, Q45/Q43, G41, B43, HD Graphics,
	HD Graphics 2000, HD Graphics 3000, HD Graphics 2500,
	HD Graphics 4000, HD Graphics P4000, HD Graphics 4600,
	HD Graphics 5000, HD Graphics P4600/P4700, Iris(TM) Graphics 5100,
	HD Graphics 4400, HD Graphics 4200, Iris(TM) Pro Graphics 5200
[    49.889] (II) VESA: driver for VESA chipsets: vesa
[    49.890] (++) using VT number 1

[    49.894] (II) Loading sub module "vbe"
[    49.894] (II) LoadModule: "vbe"
[    49.895] (II) Loading /usr/lib/xorg/modules/libvbe.so
[    49.895] (II) Module vbe: vendor="X.Org Foundation"
[    49.895] 	compiled for 1.14.3, module version = 1.1.0
[    49.895] 	ABI class: X.Org Video Driver, version 14.1
[    49.895] (II) Loading sub module "int10"
[    49.895] (II) LoadModule: "int10"
[    49.896] (II) Loading /usr/lib/xorg/modules/libint10.so
[    49.897] (II) Module int10: vendor="X.Org Foundation"
[    49.897] 	compiled for 1.14.3, module version = 1.0.0
[    49.897] 	ABI class: X.Org Video Driver, version 14.1
[    49.897] (II) VESA(0): initializing int10
[    50.112] (II) VESA(0): VESA BIOS detected
[    50.112] (II) VESA(0): VESA VBE Version 3.0
[    50.112] (II) VESA(0): VESA VBE Total Mem: 7872 kB
[    50.112] (II) VESA(0): VESA VBE OEM: Intel(r) 82945GM Chipset Family Graphics Chip Accelerated VGA BIOS
[    50.112] (II) VESA(0): VESA VBE OEM Software Rev: 1.0
[    50.112] (II) VESA(0): VESA VBE OEM Vendor: Intel Corporation
[    50.112] (II) VESA(0): VESA VBE OEM Product: Intel(r) 82945GM Chipset Family Graphics Controller
[    50.112] (II) VESA(0): VESA VBE OEM Product Rev: Hardware Version 0.0
[    50.120] (II) VESA(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[    50.120] (==) VESA(0): Depth 24, (--) framebuffer bpp 32
[    50.120] (==) VESA(0): RGB weight 888
[    50.120] (==) VESA(0): Default visual is TrueColor
[    50.120] (==) VESA(0): Using gamma correction (1.0, 1.0, 1.0)
[    50.120] (II) Loading sub module "ddc"
[    50.120] (II) LoadModule: "ddc"
[    50.120] (II) Module "ddc" already built-in
[    50.120] (II) VESA(0): VESA VBE DDC supported
[    50.120] (II) VESA(0): VESA VBE DDC Level 2
[    50.120] (II) VESA(0): VESA VBE DDC transfer in appr. 1 sec.
[    50.133] (II) VESA(0): VESA VBE DDC read successfully
[    50.133] (II) VESA(0): Manufacturer: QDS  Model: 25  Serial#: 0
[    50.133] (II) VESA(0): Year: 2005  Week: 0
[    50.133] (II) VESA(0): EDID Version: 1.3
[    50.133] (II) VESA(0): Digital Display Input
[    50.133] (II) VESA(0): Max Image Size [cm]: horiz.: 30  vert.: 23
[    50.133] (II) VESA(0): Gamma: 2.20
[    50.133] (II) VESA(0): No DPMS capabilities specified
[    50.133] (II) VESA(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[    50.133] (II) VESA(0): First detailed timing is preferred mode
[    50.133] (II) VESA(0): redX: 0.591 redY: 0.325   greenX: 0.314 greenY: 0.562
[    50.133] (II) VESA(0): blueX: 0.137 blueY: 0.119   whiteX: 0.312 whiteY: 0.328
[    50.133] (II) VESA(0): Manufacturer's mask: 0
[    50.133] (II) VESA(0): Supported detailed timing:
[    50.133] (II) VESA(0): clock: 65.0 MHz   Image Size:  304 x 228 mm
[    50.133] (II) VESA(0): h_active: 1024  h_sync: 1048  h_sync_end 1184 h_blank_end 1344 h_border: 0
[    50.133] (II) VESA(0): v_active: 768  v_sync: 771  v_sync_end 777 v_blanking: 806 v_border: 0
[    50.133] (II) VESA(0): Unknown vendor-specific block f
[    50.133] (II) VESA(0):  QUANTADISPLAY
[    50.133] (II) VESA(0):  QD15XL063
[    50.133] (II) VESA(0): EDID (in hex):
[    50.133] (II) VESA(0): 	00ffffffffffff004493250000000000
[    50.133] (II) VESA(0): 	000f0103801e17780a58209753509023
[    50.133] (II) VESA(0): 	1e505400000001010101010101010101
[    50.133] (II) VESA(0): 	01010101010164190040410026301888
[    50.133] (II) VESA(0): 	360030e4100000190000000f0004c02e
[    50.133] (II) VESA(0): 	c00211111176c0126301000000fe0051
[    50.133] (II) VESA(0): 	55414e5441444953504c4159000000fe
[    50.133] (II) VESA(0): 	0051443135584c3036330a2020200002
[    50.133] (II) VESA(0): EDID vendor "QDS", prod id 37
[    50.133] (II) VESA(0): Printing DDC gathered Modelines:
[    50.133] (II) VESA(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz eP)
[    50.133] (II) VESA(0): Searching for matching VESA mode(s):
[    50.133] Mode: 160 (0x0)

Both vesa and intel driver are loaded, and some other drivers fail to load, hope this might be a clue

Offline

#28 2013-10-24 01:16:30

halimbo
Member
From: Krefeld, Germany
Registered: 2013-10-23
Posts: 74

Re: [Solved] Xserver Runlevel Confusion

I finally found my solution on https://wiki.archlinux.de/title/Intel
I rebuild the kernel with a module called "i915" (seems to be the intel driver), so i could remove the "nomodeset" from the kernel command-line.
Now X starts on the vt from which I call it and it shuts down correctly and I can switch to my other vt's.
Everything works perfect. smile
thank you for your engagement smile

I would mark the thread as solved if i knew how big_smile

Last edited by halimbo (2013-10-24 01:21:51)

Offline

#29 2013-10-24 01:36:28

karol
Archivist
Registered: 2009-05-06
Posts: 25,440

Re: [Solved] Xserver Runlevel Confusion

halimbo wrote:

I would mark the thread as solved if i knew how big_smile

https://bbs.archlinux.org/viewtopic.php?id=130309

Offline

Board footer

Powered by FluxBB