You are not logged in.
Hello,
Scince the update to Gnome 3.10 it is not possible to turn off my internal Display when an external Display is connected.
I want to turn off the internal Laptopdisplay and use only the external.
In Systemsettings Gnome detected 3 Monitors, which is wrong.
1. Internal Display(marked as Secondary Display by me)
2. Unknown 0" (which is marked as off by the System)
3. Samsung 19" (marked as primary Display be me)
I suspect that the second Monitor is causing the Problem.
When i click on "Internal Display" and choose "Off" the Screen flickers a short Time but after that nothing has changed.
Gnome works as if a would have chosen an extended Desktop setting with the internal Display as secondary Device.
Any suggestions how to solve this would be great.
Thanks in advance.
BastlWastl
Offline
Does it work if you turn off the screen using xrandr in the command line? Also, what does xrandr show for displays?
Offline
Thanks for your reply gnunn.
Turn off with
xrandr --output LVDS1 --offvia commandline results in a short flickering where both screens are off and coming back on after one second. The same behaviour as with the Gnome GUI.
xrandr show this:
sebastian@Wastl2Go ~ $ xrandr
Screen 0: minimum 320 x 200, current 2560 x 1024, maximum 32767 x 32767
LVDS1 connected 1280x800+0+0 (normal left inverted right x axis y axis) 331mm x 207mm
1280x800 60.0*+ 40.0
1024x768 60.0
800x600 60.3 56.2
640x480 59.9
VGA1 connected primary 1280x1024+1280+0 (normal left inverted right x axis y axis) 376mm x 301mm
1280x1024 60.0*+ 75.0
1280x960 60.0
1152x864 75.0
1024x768 75.1 70.1 60.0
832x624 74.6
800x600 72.2 75.0 60.3 56.2
640x480 75.0 72.8 66.7 60.0
720x400 70.1
HDMI1 disconnected (normal left inverted right x axis y axis)
DP1 disconnected (normal left inverted right x axis y axis)
HDMI2 disconnected (normal left inverted right x axis y axis)
DP2 disconnected (normal left inverted right x axis y axis)
DP3 disconnected (normal left inverted right x axis y axis)
TV1 unknown connection (normal left inverted right x axis y axis)
848x480 59.9 +
640x480 59.9 +
1024x768 59.9
800x600 59.9 I have no Idea what is ment by TV1. My Laptop is a Dell Latitude E5500 which has only the VGA connector for external Monitors.
Offline
Hi,
you are right the problem is the second monitor, I reached the same conclusion so I focused my attention on it.
I have a similar configuration with the same issue on my Fedora 20 and I solved editing the xorg.conf.
I had to create a new 10-intel.conf in /etc/X11/xorg.conf.d because my system don't create it but you can use an existing one (ie xorg.conf) if your system is different.
The important thing is that you have a piece of code like this
Section "Monitor"
Identifier "TV1"
Option "Ignore" "true"
EndSectionNow I can turn off my LVDS1 via Gnome Setting > Display or xrandr
xrandr --output LVDS1 --offbecause the "ghost" output isn't anywhere any more.
I tried another solution adding the kernel parameter
video=TV1:dbut it didn't work or better, worked randomly, giving more times the sequence
xrandr --auto
xrandr --output LVDS1 --offHope this help, bye.
Offline