You are not logged in.
Pages: 1
I should preface this with I'm not a Linux noob, but I am no expert either (I get by). Also I hope this is the right forum to post in. So after I updated about a week ago I start seeing errors at boot. Never could quite see exactly what they were so today I logged dmesg to a text file. I should also say the only real problem I have seen outside of the errors showing is Plex Media Server having an issue streaming my media that is kept on a separate hard drive from the main system. After the errors show the system continues to boot to Openbox. I was hope someone could tell me what the errors are and how to not get them anymore. I have posted the dmesg log below, thanks in advanced for any help.
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.12.1-1-ARCH (tobias@T-POWA-LX) (gcc version 4.8.2 (GCC) ) #1 SMP PREEMPT Thu Nov 21 08:18:42 CET 2013
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=f3bb4b9d-d9f1-4ef7-9180-07f1d4a00fc2 rw quiet
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f3ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009f400-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bffdffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bffe0000-0x00000000bffe2fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bffe3000-0x00000000bffeffff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000bfff0000-0x00000000bfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013fffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.5 present.
[ 0.000000] DMI: Unknow Unknow/HA04, BIOS 6.00 PG 04/16/2008
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x140000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-C7FFF write-protect
[ 0.000000] C8000-FFFFF uncachable
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask FF80000000 write-back
[ 0.000000] 1 base 0080000000 mask FFC0000000 write-back
[ 0.000000] 2 base 0100000000 mask FFC0000000 write-back
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 0000000140000000 aka 5120M
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: update [mem 0xc0000000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xbffe0 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000f3c70-0x000f3c7f] mapped at [ffff8800000f3c70]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01b32000, 0x01b32fff] PGTABLE
[ 0.000000] BRK [0x01b33000, 0x01b33fff] PGTABLE
[ 0.000000] BRK [0x01b34000, 0x01b34fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x13fe00000-0x13fffffff]
[ 0.000000] [mem 0x13fe00000-0x13fffffff] page 2M
[ 0.000000] BRK [0x01b35000, 0x01b35fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x13c000000-0x13fdfffff]
[ 0.000000] [mem 0x13c000000-0x13fdfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x13bffffff]
[ 0.000000] [mem 0x100000000-0x13bffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0xbffdffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0xbfdfffff] page 2M
[ 0.000000] [mem 0xbfe00000-0xbffdffff] page 4k
[ 0.000000] RAMDISK: [mem 0x37a04000-0x37cf9fff]
[ 0.000000] ACPI: RSDP 00000000000f7e70 00024 (v02 790FX )
[ 0.000000] ACPI: XSDT 00000000bffe3080 00044 (v01 790FX AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: FACP 00000000bffeaa40 000F4 (v03 790FX AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: DSDT 00000000bffe3200 07822 (v01 790FX AWRDACPI 00001000 MSFT 03000000)
[ 0.000000] ACPI: FACS 00000000bffe0000 00040
[ 0.000000] ACPI: HPET 00000000bffeac00 00038 (v01 790FX AWRDACPI 42302E31 AWRD 00000098)
[ 0.000000] ACPI: MCFG 00000000bffeac40 0003C (v01 790FX AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: APIC 00000000bffeab40 00084 (v01 790FX AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] Scanning NUMA topology in Northbridge 24
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000013fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x13fffffff]
[ 0.000000] NODE_DATA [mem 0x13fff8000-0x13fffcfff]
[ 0.000000] [ffffea0000000000-ffffea0004ffffff] PMD -> [ffff88013b600000-ffff88013f5fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x13fffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
[ 0.000000] node 0: [mem 0x00100000-0xbffdffff]
[ 0.000000] node 0: [mem 0x100000000-0x13fffffff]
[ 0.000000] On node 0 totalpages: 1048446
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 12224 pages used for memmap
[ 0.000000] DMA32 zone: 782304 pages, LIFO batch:31
[ 0.000000] Normal zone: 4096 pages used for memmap
[ 0.000000] Normal zone: 262144 pages, LIFO batch:31
[ 0.000000] Detected use of extended apic ids on hypertransport bus
[ 0.000000] ACPI: PM-Timer IO Port: 0x4008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10b9a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbffe0000-0xbffe2fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbffe3000-0xbffeffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbfff0000-0xbfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc0000000-0xdfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xffffffff]
[ 0.000000] e820: [mem 0xc0000000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88013fc00000 s86464 r8192 d24128 u524288
[ 0.000000] pcpu-alloc: s86464 r8192 d24128 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1032041
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=f3bb4b9d-d9f1-4ef7-9180-07f1d4a00fc2 rw quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Node 0: aperture @ b4000000 size 32 MB
[ 0.000000] Aperture pointing to e820 RAM. Ignoring.
[ 0.000000] Your BIOS doesn't leave a aperture memory hole
[ 0.000000] Please enable the IOMMU option in the BIOS setup
[ 0.000000] This costs you 64 MB of RAM
[ 0.000000] Mapping aperture over 65536 KB of RAM @ b4000000
[ 0.000000] PM: Registered nosave memory: [mem 0xb4000000-0xb7ffffff]
[ 0.000000] Memory: 3981312K/4193784K available (5115K kernel code, 806K rwdata, 1708K rodata, 1144K init, 1288K bss, 212472K reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
[ 0.000000] NR_IRQS:8448 nr_irqs:712 16
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 16777216 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration failed
[ 0.000000] tsc: Unable to calibrate against PIT
[ 0.000000] tsc: using HPET reference calibration
[ 0.000000] tsc: Detected 2700.249 MHz processor
[ 0.000000] tsc: Marking TSC unstable due to TSCs unsynchronized
[ 0.013338] Calibrating delay loop (skipped), value calculated using timer frequency.. 5402.51 BogoMIPS (lpj=9000830)
[ 0.013342] pid_max: default: 32768 minimum: 301
[ 0.013386] Security Framework initialized
[ 0.013395] AppArmor: AppArmor disabled by boot time parameter
[ 0.013396] Yama: becoming mindful.
[ 0.013706] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.015721] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.017157] Mount-cache hash table entries: 256
[ 0.017396] Initializing cgroup subsys memory
[ 0.017414] Initializing cgroup subsys devices
[ 0.017417] Initializing cgroup subsys freezer
[ 0.017418] Initializing cgroup subsys net_cls
[ 0.017420] Initializing cgroup subsys blkio
[ 0.017442] tseg: 0000000000
[ 0.017449] CPU: Physical Processor ID: 0
[ 0.017450] CPU: Processor Core ID: 0
[ 0.017452] mce: CPU supports 5 MCE banks
[ 0.017458] LVT offset 0 assigned for vector 0xf9
[ 0.017462] process: using AMD E400 aware idle routine
[ 0.017464] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4
tlb_flushall_shift: 4
[ 0.017546] Freeing SMP alternatives memory: 20K (ffffffff819e9000 - ffffffff819ee000)
[ 0.018244] ACPI: Core revision 20130725
[ 0.021196] ACPI: All ACPI Tables successfully acquired
[ 0.023362] ftrace: allocating 20290 entries in 80 pages
[ 0.034097] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.068081] smpboot: CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 5200+ (fam: 0f, model: 6b, stepping: 02)
[ 0.069999] Performance Events: AMD PMU driver.
[ 0.069999] ... version: 0
[ 0.069999] ... bit width: 48
[ 0.069999] ... generic registers: 4
[ 0.069999] ... value mask: 0000ffffffffffff
[ 0.069999] ... max period: 00007fffffffffff
[ 0.069999] ... fixed-purpose events: 0
[ 0.069999] ... event mask: 000000000000000f
[ 0.083388] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.090068] smpboot: Booting Node 0, Processors # 1 OK
[ 0.183403] Brought up 2 CPUs
[ 0.183406] smpboot: Total of 2 processors activated (10805.89 BogoMIPS)
[ 0.183927] devtmpfs: initialized
[ 0.188111] PM: Registering ACPI NVS region [mem 0xbffe0000-0xbffe2fff] (12288 bytes)
[ 0.188111] RTC time: 8:27:34, date: 12/02/13
[ 0.188111] NET: Registered protocol family 16
[ 0.188127] cpuidle: using governor ladder
[ 0.188128] cpuidle: using governor menu
[ 0.188133] node 0 link 0: io port [b000, ffff]
[ 0.188135] TOM: 00000000c0000000 aka 3072M
[ 0.188137] node 0 link 0: mmio [a0000, bffff]
[ 0.188140] node 0 link 0: mmio [c0000000, dfffffff]
[ 0.188142] node 0 link 0: mmio [f0000000, fe02ffff]
[ 0.188144] node 0 link 0: mmio [e0000000, e04fffff]
[ 0.188145] TOM2: 0000000140000000 aka 5120M
[ 0.188148] bus: [bus 00-04] on node 0 link 0
[ 0.188149] bus: 00 [io 0x0000-0xffff]
[ 0.188151] bus: 00 [mem 0x000a0000-0x000bffff]
[ 0.188152] bus: 00 [mem 0xc0000000-0xefffffff]
[ 0.188153] bus: 00 [mem 0xf0000000-0xffffffff]
[ 0.188155] bus: 00 [mem 0x140000000-0xfcffffffff]
[ 0.188168] ACPI: bus type PCI registered
[ 0.188170] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.188231] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.188234] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.199259] PCI: Using configuration type 1 for base access
[ 0.199433] mtrr: your CPUs had inconsistent variable MTRR settings
[ 0.199434] mtrr: probably your BIOS does not setup all CPUs.
[ 0.199435] mtrr: corrected configuration.
[ 0.200005] bio: create slab <bio-0> at 0
[ 0.200048] ACPI: Added _OSI(Module Device)
[ 0.200050] ACPI: Added _OSI(Processor Device)
[ 0.200052] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.200053] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.200693] ACPI: EC: Look up EC in DSDT
[ 0.201612] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.204741] ACPI: Interpreter enabled
[ 0.204755] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130725/hwxface-571)
[ 0.204760] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20130725/hwxface-571)
[ 0.204770] ACPI: (supports S0 S1 S4 S5)
[ 0.204771] ACPI: Using IOAPIC for interrupt routing
[ 0.204841] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.204933] ACPI: No dock devices found.
[ 0.217777] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.217785] acpi PNP0A03:00: ACPI _OSC support notification failed, disabling PCIe ASPM
[ 0.217787] acpi PNP0A03:00: Unable to request _OSC control (_OSC support mask: 0x08)
[ 0.218038] ACPI: \_SB_.PCI0.SYSR: can't evaluate _ADR (0x5)
[ 0.218040] ACPI: \_SB_.PCI0.FDC0: can't evaluate _ADR (0x5)
[ 0.218043] ACPI: \_SB_.PCI0.UAR1: can't evaluate _ADR (0x5)
[ 0.218045] ACPI: \_SB_.PCI0.UAR2: can't evaluate _ADR (0x5)
[ 0.218047] ACPI: \_SB_.PCI0.IRDA: can't evaluate _ADR (0x5)
[ 0.218050] ACPI: \_SB_.PCI0.LPT1: can't evaluate _ADR (0x5)
[ 0.218052] ACPI: \_SB_.PCI0.ECP1: can't evaluate _ADR (0x5)
[ 0.218054] ACPI: \_SB_.PCI0.PS2M: can't evaluate _ADR (0x5)
[ 0.218057] ACPI: \_SB_.PCI0.PS2K: can't evaluate _ADR (0x5)
[ 0.218058] PCI host bridge to bus 0000:00
[ 0.218061] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.218063] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.218065] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.218068] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.218069] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
[ 0.218072] pci_bus 0000:00: root bus resource [mem 0xbfff0000-0xffffffff]
[ 0.218083] pci 0000:00:00.0: [1002:5956] type 00 class 0x060000
[ 0.218097] pci 0000:00:00.0: reg 0x1c: [mem 0xe0000000-0xffffffff 64bit]
[ 0.218196] pci 0000:00:02.0: [1002:5978] type 01 class 0x060400
[ 0.218233] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ 0.218280] pci 0000:00:02.0: System wakeup disabled by ACPI
[ 0.218322] pci 0000:00:06.0: [1002:597c] type 01 class 0x060400
[ 0.218357] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
[ 0.218402] pci 0000:00:06.0: System wakeup disabled by ACPI
[ 0.218438] pci 0000:00:07.0: [1002:597d] type 01 class 0x060400
[ 0.218473] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
[ 0.218518] pci 0000:00:07.0: System wakeup disabled by ACPI
[ 0.218573] pci 0000:00:12.0: [1002:4380] type 00 class 0x01018f
[ 0.218594] pci 0000:00:12.0: reg 0x10: [io 0xff00-0xff07]
[ 0.218605] pci 0000:00:12.0: reg 0x14: [io 0xfe00-0xfe03]
[ 0.218616] pci 0000:00:12.0: reg 0x18: [io 0xfd00-0xfd07]
[ 0.218626] pci 0000:00:12.0: reg 0x1c: [io 0xfc00-0xfc03]
[ 0.218637] pci 0000:00:12.0: reg 0x20: [io 0xfb00-0xfb0f]
[ 0.218648] pci 0000:00:12.0: reg 0x24: [mem 0xfe02f000-0xfe02f3ff]
[ 0.218671] pci 0000:00:12.0: set SATA to AHCI mode
[ 0.218780] pci 0000:00:13.0: [1002:4387] type 00 class 0x0c0310
[ 0.218795] pci 0000:00:13.0: reg 0x10: [mem 0xfe02e000-0xfe02efff]
[ 0.218895] pci 0000:00:13.0: System wakeup disabled by ACPI
[ 0.218932] pci 0000:00:13.1: [1002:4388] type 00 class 0x0c0310
[ 0.218947] pci 0000:00:13.1: reg 0x10: [mem 0xfe02d000-0xfe02dfff]
[ 0.219048] pci 0000:00:13.1: System wakeup disabled by ACPI
[ 0.219087] pci 0000:00:13.2: [1002:4389] type 00 class 0x0c0310
[ 0.219102] pci 0000:00:13.2: reg 0x10: [mem 0xfe02c000-0xfe02cfff]
[ 0.219203] pci 0000:00:13.2: System wakeup disabled by ACPI
[ 0.219238] pci 0000:00:13.3: [1002:438a] type 00 class 0x0c0310
[ 0.219253] pci 0000:00:13.3: reg 0x10: [mem 0xfe02b000-0xfe02bfff]
[ 0.219354] pci 0000:00:13.3: System wakeup disabled by ACPI
[ 0.219390] pci 0000:00:13.4: [1002:438b] type 00 class 0x0c0310
[ 0.219405] pci 0000:00:13.4: reg 0x10: [mem 0xfe02a000-0xfe02afff]
[ 0.219506] pci 0000:00:13.4: System wakeup disabled by ACPI
[ 0.219554] pci 0000:00:13.5: [1002:4386] type 00 class 0x0c0320
[ 0.219575] pci 0000:00:13.5: reg 0x10: [mem 0xfe029000-0xfe0290ff]
[ 0.219665] pci 0000:00:13.5: supports D1 D2
[ 0.219668] pci 0000:00:13.5: PME# supported from D0 D1 D2 D3hot
[ 0.219716] pci 0000:00:13.5: System wakeup disabled by ACPI
[ 0.219759] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
[ 0.219783] pci 0000:00:14.0: reg 0x10: [io 0x0b00-0x0b0f]
[ 0.219793] pci 0000:00:14.0: reg 0x14: [mem 0xfed00000-0xfed003ff]
[ 0.219934] pci 0000:00:14.1: [1002:438c] type 00 class 0x01018a
[ 0.219952] pci 0000:00:14.1: reg 0x10: [io 0x0000-0x0007]
[ 0.219963] pci 0000:00:14.1: reg 0x14: [io 0x0000-0x0003]
[ 0.219974] pci 0000:00:14.1: reg 0x18: [io 0x0000-0x0007]
[ 0.219984] pci 0000:00:14.1: reg 0x1c: [io 0x0000-0x0003]
[ 0.219995] pci 0000:00:14.1: reg 0x20: [io 0xf900-0xf90f]
[ 0.220124] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
[ 0.220151] pci 0000:00:14.2: reg 0x10: [mem 0xfe024000-0xfe027fff 64bit]
[ 0.220234] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.220287] pci 0000:00:14.2: System wakeup disabled by ACPI
[ 0.220322] pci 0000:00:14.3: [1002:438d] type 00 class 0x060100
[ 0.220460] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
[ 0.220536] pci 0000:00:14.4: System wakeup disabled by ACPI
[ 0.220575] pci 0000:00:18.0: [1022:1100] type 00 class 0x060000
[ 0.220645] pci 0000:00:18.1: [1022:1101] type 00 class 0x060000
[ 0.220712] pci 0000:00:18.2: [1022:1102] type 00 class 0x060000
[ 0.220779] pci 0000:00:18.3: [1022:1103] type 00 class 0x060000
[ 0.220904] pci 0000:01:00.0: [10de:042c] type 00 class 0x030000
[ 0.220917] pci 0000:01:00.0: reg 0x10: [mem 0xfa000000-0xfaffffff]
[ 0.220929] pci 0000:01:00.0: reg 0x14: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.220942] pci 0000:01:00.0: reg 0x1c: [mem 0xf8000000-0xf9ffffff 64bit]
[ 0.220951] pci 0000:01:00.0: reg 0x24: [io 0xcf00-0xcf7f]
[ 0.220959] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
[ 0.226682] pci 0000:00:02.0: PCI bridge to [bus 01]
[ 0.226687] pci 0000:00:02.0: bridge window [io 0xc000-0xcfff]
[ 0.226690] pci 0000:00:02.0: bridge window [mem 0xf8000000-0xfbffffff]
[ 0.226694] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.226751] pci 0000:02:00.0: [11ab:4364] type 00 class 0x020000
[ 0.226769] pci 0000:02:00.0: reg 0x10: [mem 0xfdcfc000-0xfdcfffff 64bit]
[ 0.226780] pci 0000:02:00.0: reg 0x18: [io 0xee00-0xeeff]
[ 0.226813] pci 0000:02:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
[ 0.226865] pci 0000:02:00.0: supports D1 D2
[ 0.226868] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.233345] pci 0000:00:06.0: PCI bridge to [bus 02]
[ 0.233349] pci 0000:00:06.0: bridge window [io 0xe000-0xefff]
[ 0.233352] pci 0000:00:06.0: bridge window [mem 0xfdc00000-0xfdcfffff]
[ 0.233356] pci 0000:00:06.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
[ 0.233407] pci 0000:03:00.0: [197b:2363] type 00 class 0x010185
[ 0.233479] pci 0000:03:00.0: reg 0x24: [mem 0xfdefe000-0xfdefffff]
[ 0.233491] pci 0000:03:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
[ 0.233534] pci 0000:03:00.0: PME# supported from D3hot
[ 0.233590] pci 0000:03:00.1: [197b:2363] type 00 class 0x010185
[ 0.233608] pci 0000:03:00.1: reg 0x10: [io 0xdf00-0xdf07]
[ 0.233617] pci 0000:03:00.1: reg 0x14: [io 0xde00-0xde03]
[ 0.233626] pci 0000:03:00.1: reg 0x18: [io 0xdd00-0xdd07]
[ 0.233635] pci 0000:03:00.1: reg 0x1c: [io 0xdc00-0xdc03]
[ 0.233644] pci 0000:03:00.1: reg 0x20: [io 0xdb00-0xdb0f]
[ 0.233730] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.233738] pci 0000:00:07.0: PCI bridge to [bus 03]
[ 0.233742] pci 0000:00:07.0: bridge window [io 0xd000-0xdfff]
[ 0.233745] pci 0000:00:07.0: bridge window [mem 0xfde00000-0xfdefffff]
[ 0.233749] pci 0000:00:07.0: bridge window [mem 0xfdd00000-0xfddfffff 64bit pref]
[ 0.233826] pci 0000:00:14.4: PCI bridge to [bus 04] (subtractive decode)
[ 0.233831] pci 0000:00:14.4: bridge window [io 0xb000-0xbfff]
[ 0.233835] pci 0000:00:14.4: bridge window [mem 0xfdb00000-0xfdbfffff]
[ 0.233840] pci 0000:00:14.4: bridge window [mem 0xfda00000-0xfdafffff pref]
[ 0.233843] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.233845] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.233847] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.233850] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
[ 0.233852] pci 0000:00:14.4: bridge window [mem 0xbfff0000-0xffffffff] (subtractive decode)
[ 0.234022] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.234071] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.234118] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.234165] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.234213] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.234260] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.234308] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.234355] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.235135] ACPI: Enabled 2 GPEs in block 00 to 1F
[ 0.235141] ACPI: \_SB_.PCI0: notify handler is installed
[ 0.235177] Found 1 acpi root devices
[ 0.235262] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.235262] vgaarb: loaded
[ 0.235262] vgaarb: bridge control possible 0000:01:00.0
[ 0.235262] PCI: Using ACPI for IRQ routing
[ 0.244778] PCI: pci_cache_line_size set to 64 bytes
[ 0.244786] pci 0000:00:00.0: address space collision: [mem 0xe0000000-0xffffffff 64bit] conflicts with PCI Bus 0000:01 [mem 0xf8000000-0xfbffffff]
[ 0.244846] e820: reserve RAM buffer [mem 0x0009f400-0x0009ffff]
[ 0.244848] e820: reserve RAM buffer [mem 0xbffe0000-0xbfffffff]
[ 0.244956] NetLabel: Initializing
[ 0.244957] NetLabel: domain hash size = 128
[ 0.244959] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.244971] NetLabel: unlabeled traffic allowed by default
[ 0.244995] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.244999] hpet0: 4 comparators, 32-bit 14.318180 MHz counter
[ 0.246697] Switched to clocksource hpet
[ 0.251917] pnp: PnP ACPI init
[ 0.251938] ACPI: bus type PNP registered
[ 0.252120] pnp 00:00: disabling [mem 0x00000000-0x00000fff window] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.252151] pnp 00:00: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:01:00.0 BAR 6 [mem 0x00000000-0x0001ffff pref]
[ 0.252156] pnp 00:00: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:02:00.0 BAR 6 [mem 0x00000000-0x0001ffff pref]
[ 0.252160] pnp 00:00: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:03:00.0 BAR 6 [mem 0x00000000-0x0000ffff pref]
[ 0.252195] system 00:00: [io 0x4100-0x411f] has been reserved
[ 0.252199] system 00:00: [io 0x0228-0x022f] has been reserved
[ 0.252201] system 00:00: [io 0x040b] has been reserved
[ 0.252204] system 00:00: [io 0x04d6] has been reserved
[ 0.252206] system 00:00: [io 0x0c00-0x0c01] has been reserved
[ 0.252209] system 00:00: [io 0x0c14] has been reserved
[ 0.252211] system 00:00: [io 0x0c50-0x0c52] has been reserved
[ 0.252214] system 00:00: [io 0x0c6c-0x0c6d] has been reserved
[ 0.252216] system 00:00: [io 0x0c6f] has been reserved
[ 0.252219] system 00:00: [io 0x0cd0-0x0cd1] has been reserved
[ 0.252221] system 00:00: [io 0x0cd2-0x0cd3] has been reserved
[ 0.252224] system 00:00: [io 0x0cd4-0x0cdf] has been reserved
[ 0.252226] system 00:00: [io 0x4000-0x40fe] could not be reserved
[ 0.252229] system 00:00: [io 0x4210-0x4217] has been reserved
[ 0.252231] system 00:00: [io 0x0b10-0x0b1f] has been reserved
[ 0.252235] system 00:00: [mem 0xfee00400-0xfee00fff window] has been reserved
[ 0.252239] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.252336] pnp 00:01: [dma 4]
[ 0.252360] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.252442] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.252487] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.252510] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.252544] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.252614] system 00:06: [io 0x04d0-0x04d1] has been reserved
[ 0.252617] system 00:06: [io 0x0f40-0x0f45] has been reserved
[ 0.252620] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.252767] pnp 00:07: [dma 2]
[ 0.252808] pnp 00:07: Plug and Play ACPI device, IDs PNP0700 (active)
[ 0.253041] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.253372] pnp 00:09: Plug and Play ACPI device, IDs PNP0510 (active)
[ 0.253612] pnp 00:0a: Plug and Play ACPI device, IDs PNP0400 (active)
[ 0.253805] pnp 00:0b: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.253859] pnp 00:0c: disabling [mem 0x000f0000-0x000fffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.253862] pnp 00:0c: disabling [mem 0x00000000-0x001fffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.253865] pnp 00:0c: disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.253868] pnp 00:0c: disabling [mem 0x00100000-0xbffdffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.253878] pnp 00:0c: disabling [mem 0xfed00000-0xfed000ff] because it overlaps 0000:00:14.0 BAR 1 [mem 0xfed00000-0xfed003ff]
[ 0.253911] system 00:0c: [mem 0xbffe0000-0xbfffffff] could not be reserved
[ 0.253914] system 00:0c: [mem 0xffff0000-0xffffffff] has been reserved
[ 0.253917] system 00:0c: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.253919] system 00:0c: [mem 0xfee00000-0xfee00fff] could not be reserved
[ 0.253922] system 00:0c: [mem 0xfff80000-0xfffeffff] has been reserved
[ 0.253924] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.253938] pnp: PnP ACPI: found 13 devices
[ 0.253939] ACPI: bus type PNP unregistered
[ 0.261111] pci 0000:01:00.0: BAR 6: assigned [mem 0xfb000000-0xfb01ffff pref]
[ 0.261115] pci 0000:00:02.0: PCI bridge to [bus 01]
[ 0.261118] pci 0000:00:02.0: bridge window [io 0xc000-0xcfff]
[ 0.261121] pci 0000:00:02.0: bridge window [mem 0xf8000000-0xfbffffff]
[ 0.261124] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.261129] pci 0000:02:00.0: BAR 6: assigned [mem 0xfdf00000-0xfdf1ffff pref]
[ 0.261131] pci 0000:00:06.0: PCI bridge to [bus 02]
[ 0.261133] pci 0000:00:06.0: bridge window [io 0xe000-0xefff]
[ 0.261136] pci 0000:00:06.0: bridge window [mem 0xfdc00000-0xfdcfffff]
[ 0.261139] pci 0000:00:06.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
[ 0.261144] pci 0000:03:00.0: BAR 6: assigned [mem 0xfdd00000-0xfdd0ffff pref]
[ 0.261146] pci 0000:00:07.0: PCI bridge to [bus 03]
[ 0.261148] pci 0000:00:07.0: bridge window [io 0xd000-0xdfff]
[ 0.261151] pci 0000:00:07.0: bridge window [mem 0xfde00000-0xfdefffff]
[ 0.261154] pci 0000:00:07.0: bridge window [mem 0xfdd00000-0xfddfffff 64bit pref]
[ 0.261158] pci 0000:00:14.4: PCI bridge to [bus 04]
[ 0.261161] pci 0000:00:14.4: bridge window [io 0xb000-0xbfff]
[ 0.261166] pci 0000:00:14.4: bridge window [mem 0xfdb00000-0xfdbfffff]
[ 0.261171] pci 0000:00:14.4: bridge window [mem 0xfda00000-0xfdafffff pref]
[ 0.261178] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.261180] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.261182] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.261184] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
[ 0.261186] pci_bus 0000:00: resource 8 [mem 0xbfff0000-0xffffffff]
[ 0.261188] pci_bus 0000:01: resource 0 [io 0xc000-0xcfff]
[ 0.261190] pci_bus 0000:01: resource 1 [mem 0xf8000000-0xfbffffff]
[ 0.261192] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.261195] pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
[ 0.261197] pci_bus 0000:02: resource 1 [mem 0xfdc00000-0xfdcfffff]
[ 0.261199] pci_bus 0000:02: resource 2 [mem 0xfdf00000-0xfdffffff 64bit pref]
[ 0.261201] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
[ 0.261203] pci_bus 0000:03: resource 1 [mem 0xfde00000-0xfdefffff]
[ 0.261205] pci_bus 0000:03: resource 2 [mem 0xfdd00000-0xfddfffff 64bit pref]
[ 0.261207] pci_bus 0000:04: resource 0 [io 0xb000-0xbfff]
[ 0.261209] pci_bus 0000:04: resource 1 [mem 0xfdb00000-0xfdbfffff]
[ 0.261211] pci_bus 0000:04: resource 2 [mem 0xfda00000-0xfdafffff pref]
[ 0.261213] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7]
[ 0.261215] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff]
[ 0.261217] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.261219] pci_bus 0000:04: resource 7 [mem 0x000c0000-0x000dffff]
[ 0.261221] pci_bus 0000:04: resource 8 [mem 0xbfff0000-0xffffffff]
[ 0.261266] NET: Registered protocol family 2
[ 0.261475] TCP established hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.261731] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.261986] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.262046] TCP: reno registered
[ 0.262057] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.262089] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.262209] NET: Registered protocol family 1
[ 0.616902] pci 0000:01:00.0: Boot video device
[ 0.616913] PCI: CLS 32 bytes, default 64
[ 0.616966] Unpacking initramfs...
[ 0.676909] Freeing initrd memory: 3032K (ffff880037a04000 - ffff880037cfa000)
[ 0.677630] PCI-DMA: Disabling AGP.
[ 0.677710] PCI-DMA: aperture base @ b4000000 size 65536 KB
[ 0.677712] PCI-DMA: using GART IOMMU.
[ 0.677715] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[ 0.682349] Scanning for low memory corruption every 60 seconds
[ 0.682695] audit: initializing netlink socket (disabled)
[ 0.682709] type=2000 audit(1385972853.679:1): initialized
[ 0.693650] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.695128] zbud: loaded
[ 0.695281] VFS: Disk quotas dquot_6.5.2
[ 0.695335] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.695554] msgmni has been set to 7910
[ 0.695944] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.695993] io scheduler noop registered
[ 0.695995] io scheduler deadline registered
[ 0.696025] io scheduler cfq registered (default)
[ 0.696145] pcieport 0000:00:02.0: irq 40 for MSI/MSI-X
[ 0.696229] pcieport 0000:00:06.0: irq 41 for MSI/MSI-X
[ 0.696299] pcieport 0000:00:07.0: irq 42 for MSI/MSI-X
[ 0.696374] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.696391] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.696444] vesafb: mode is 640x480x32, linelength=2560, pages=0
[ 0.696445] vesafb: scrolling: redraw
[ 0.696447] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.696504] vesafb: framebuffer at 0xf9000000, mapped to 0xffffc90010800000, using 1216k, total 1216k
[ 0.702849] Console: switching to colour frame buffer device 80x30
[ 0.709096] fb0: VESA VGA frame buffer device
[ 0.709135] GHES: HEST is not enabled!
[ 0.709196] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.729882] 00:08: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.750605] serial8250: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[ 0.750958] Linux agpgart interface v0.103
[ 0.751006] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 0.751007] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 0.751728] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.751860] mousedev: PS/2 mouse device common for all mice
[ 0.751927] rtc_cmos 00:03: RTC can wake from S4
[ 0.752067] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 0.752106] rtc_cmos 00:03: alarms up to one month, 242 bytes nvram, hpet irqs
[ 0.752187] drop_monitor: Initializing network drop monitor service
[ 0.752254] TCP: cubic registered
[ 0.752361] NET: Registered protocol family 10
[ 0.752553] NET: Registered protocol family 17
[ 0.752565] Key type dns_resolver registered
[ 0.752847] registered taskstats version 1
[ 0.753423] Magic number: 9:957:471
[ 0.753514] rtc_cmos 00:03: setting system clock to 2013-12-02 08:27:34 UTC (1385972854)
[ 0.753559] PM: Hibernation image not present or could not be loaded.
[ 0.755068] Freeing unused kernel memory: 1144K (ffffffff818cb000 - ffffffff819e9000)
[ 0.755072] Write protecting the kernel read-only data: 8192k
[ 0.758083] Freeing unused kernel memory: 1016K (ffff880001502000 - ffff880001600000)
[ 0.759079] Freeing unused kernel memory: 340K (ffff8800017ab000 - ffff880001800000)
[ 0.769771] systemd-udevd[47]: starting version 208
[ 0.794492] Floppy drive(s): fd0 is 1.44M
[ 0.803163] ACPI: bus type USB registered
[ 0.803196] usbcore: registered new interface driver usbfs
[ 0.803207] usbcore: registered new interface driver hub
[ 0.804032] usbcore: registered new device driver usb
[ 0.804145] SCSI subsystem initialized
[ 0.804718] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.805817] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.805956] ohci-pci: OHCI PCI platform driver
[ 0.806132] ohci-pci 0000:00:13.0: OHCI PCI host controller
[ 0.806149] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 1
[ 0.806197] ohci-pci 0000:00:13.0: irq 16, io mem 0xfe02e000
[ 0.808453] ehci-pci: EHCI PCI platform driver
[ 0.810692] FDC 0 is a post-1991 82077
[ 0.810859] libata version 3.00 loaded.
[ 0.811723] pata_jmicron 0000:03:00.1: enabling device (0000 -> 0001)
[ 0.811823] pata_jmicron 0000:03:00.1: setting latency timer to 64
[ 0.812133] scsi0 : pata_jmicron
[ 0.812212] scsi1 : pata_jmicron
[ 0.812251] ata1: PATA max UDMA/100 cmd 0xdf00 ctl 0xde00 bmdma 0xdb00 irq 16
[ 0.812253] ata2: PATA max UDMA/100 cmd 0xdd00 ctl 0xdc00 bmdma 0xdb08 irq 16
[ 0.860877] hub 1-0:1.0: USB hub found
[ 0.860890] hub 1-0:1.0: 2 ports detected
[ 0.861158] ohci-pci 0000:00:13.1: OHCI PCI host controller
[ 0.861166] ohci-pci 0000:00:13.1: new USB bus registered, assigned bus number 2
[ 0.861205] ohci-pci 0000:00:13.1: irq 17, io mem 0xfe02d000
[ 0.917507] hub 2-0:1.0: USB hub found
[ 0.917518] hub 2-0:1.0: 2 ports detected
[ 0.917709] ohci-pci 0000:00:13.2: OHCI PCI host controller
[ 0.917715] ohci-pci 0000:00:13.2: new USB bus registered, assigned bus number 3
[ 0.917744] ohci-pci 0000:00:13.2: irq 18, io mem 0xfe02c000
[ 0.974160] hub 3-0:1.0: USB hub found
[ 0.974171] hub 3-0:1.0: 2 ports detected
[ 0.974357] ohci-pci 0000:00:13.3: OHCI PCI host controller
[ 0.974364] ohci-pci 0000:00:13.3: new USB bus registered, assigned bus number 4
[ 0.974382] ohci-pci 0000:00:13.3: irq 17, io mem 0xfe02b000
[ 1.030833] hub 4-0:1.0: USB hub found
[ 1.030843] hub 4-0:1.0: 2 ports detected
[ 1.031028] ohci-pci 0000:00:13.4: OHCI PCI host controller
[ 1.031034] ohci-pci 0000:00:13.4: new USB bus registered, assigned bus number 5
[ 1.031049] ohci-pci 0000:00:13.4: irq 18, io mem 0xfe02a000
[ 1.087499] hub 5-0:1.0: USB hub found
[ 1.087509] hub 5-0:1.0: 2 ports detected
[ 1.190024] usb 1-1: new low-speed USB device number 2 using ohci-pci
[ 1.483353] usb 1-2: new low-speed USB device number 3 using ohci-pci
[ 1.643840] usb 1-1: USB disconnect, device number 2
[ 1.644033] usb 1-2: USB disconnect, device number 3
[ 1.760279] ehci-pci 0000:00:13.5: EHCI Host Controller
[ 1.760288] ehci-pci 0000:00:13.5: new USB bus registered, assigned bus number 6
[ 1.760297] ehci-pci 0000:00:13.5: applying AMD SB600/SB700 USB freeze workaround
[ 1.760313] ehci-pci 0000:00:13.5: debug port 1
[ 1.760381] ehci-pci 0000:00:13.5: irq 19, io mem 0xfe029000
[ 1.770022] ehci-pci 0000:00:13.5: USB 2.0 started, EHCI 1.00
[ 1.770182] hub 6-0:1.0: USB hub found
[ 1.770191] hub 6-0:1.0: 10 ports detected
[ 1.826731] hub 1-0:1.0: USB hub found
[ 1.826742] hub 1-0:1.0: 2 ports detected
[ 1.828066] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.828580] usbcore: registered new interface driver usbhid
[ 1.828583] usbhid: USB HID core driver
[ 1.883417] hub 2-0:1.0: USB hub found
[ 1.883431] hub 2-0:1.0: 2 ports detected
[ 1.940057] hub 3-0:1.0: USB hub found
[ 1.940067] hub 3-0:1.0: 2 ports detected
[ 1.996722] hub 4-0:1.0: USB hub found
[ 1.996732] hub 4-0:1.0: 2 ports detected
[ 2.053388] hub 5-0:1.0: USB hub found
[ 2.053398] hub 5-0:1.0: 2 ports detected
[ 2.053683] ahci 0000:00:12.0: version 3.0
[ 2.053835] ahci 0000:00:12.0: controller can't do 64bit DMA, forcing 32bit
[ 2.053933] ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
[ 2.053937] ahci 0000:00:12.0: flags: ncq sntf ilck led clo pmp pio ccc
[ 2.054699] scsi2 : ahci
[ 2.054775] scsi3 : ahci
[ 2.054850] scsi4 : ahci
[ 2.054920] scsi5 : ahci
[ 2.054967] ata3: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f100 irq 22
[ 2.054971] ata4: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180 irq 22
[ 2.054974] ata5: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f200 irq 22
[ 2.054977] ata6: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 22
[ 2.056192] scsi6 : pata_atiixp
[ 2.056251] scsi7 : pata_atiixp
[ 2.056292] ata7: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf900 irq 14
[ 2.056294] ata8: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf908 irq 15
[ 2.066728] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[ 2.066733] ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part
[ 2.067129] scsi8 : ahci
[ 2.067200] scsi9 : ahci
[ 2.067257] ata9: SATA max UDMA/133 abar m8192@0xfdefe000 port 0xfdefe100 irq 19
[ 2.067260] ata10: SATA max UDMA/133 abar m8192@0xfdefe000 port 0xfdefe180 irq 19
[ 2.213828] ata7.00: ATAPI: HL-DT-ST RW/DVD GCC-4481B, 1.04, max UDMA/33
[ 2.227109] ata7.00: configured for UDMA/33
[ 2.373413] ata6: SATA link down (SStatus 0 SControl 300)
[ 2.386722] ata9: SATA link down (SStatus 0 SControl 300)
[ 2.386768] ata10: SATA link down (SStatus 0 SControl 300)
[ 2.540027] ata3: softreset failed (device not ready)
[ 2.540185] ata3: applying PMP SRST workaround and retrying
[ 2.540217] ata5: softreset failed (device not ready)
[ 2.540381] ata5: applying PMP SRST workaround and retrying
[ 2.540408] ata4: softreset failed (device not ready)
[ 2.540563] ata4: applying PMP SRST workaround and retrying
[ 2.566689] usb 1-1: new low-speed USB device number 4 using ohci-pci
[ 2.706711] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.706750] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.706786] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.707572] ata3.00: ATA-7: ST3200826AS, 3.03, max UDMA/133
[ 2.707575] ata3.00: 390721968 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 2.707578] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 2.708066] ata4.00: ATA-8: TOSHIBA DT01ACA200, MX4OABB0, max UDMA/133
[ 2.708068] ata4.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 2.708070] ata4.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 2.708443] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 2.708445] ata3.00: configured for UDMA/133
[ 2.708626] scsi 2:0:0:0: Direct-Access ATA ST3200826AS 3.03 PQ: 0 ANSI: 5
[ 2.709433] ata4.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 2.709436] ata4.00: configured for UDMA/133
[ 2.709543] scsi 3:0:0:0: Direct-Access ATA TOSHIBA DT01ACA2 MX4O PQ: 0 ANSI: 5
[ 2.709897] sd 2:0:0:0: [sda] 390721968 512-byte logical blocks: (200 GB/186 GiB)
[ 2.709940] sd 3:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[ 2.709942] sd 3:0:0:0: [sdb] 4096-byte physical blocks
[ 2.710054] sd 2:0:0:0: [sda] Write Protect is off
[ 2.710057] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.710081] sd 3:0:0:0: [sdb] Write Protect is off
[ 2.710083] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 2.710108] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.710131] sd 3:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 2.713184] ata5.00: ATA-7: SAMSUNG HD103SI, 1AG01118, max UDMA7
[ 2.713188] ata5.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 2.713191] ata5.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 2.716937] sdb: sdb1
[ 2.717244] sd 3:0:0:0: [sdb] Attached SCSI disk
[ 2.719680] ata5.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 2.719683] ata5.00: configured for UDMA/133
[ 2.719828] scsi 4:0:0:0: Direct-Access ATA SAMSUNG HD103SI 1AG0 PQ: 0 ANSI: 5
[ 2.720076] sd 4:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 2.720133] sd 4:0:0:0: [sdc] Write Protect is off
[ 2.720136] sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 2.720160] sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.721044] scsi 6:0:0:0: CD-ROM HL-DT-ST RW/DVD GCC-4481B 1.04 PQ: 0 ANSI: 5
[ 2.723354] sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
[ 2.723359] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.723609] sr 6:0:0:0: Attached scsi CD-ROM sr0
[ 2.726375] ata5.00: exception Emask 0x50 SAct 0x1 SErr 0x680900 action 0x6 frozen
[ 2.726661] ata5.00: irq_stat 0x08000000, interface fatal error
[ 2.726858] ata5: SError: { UnrecovData HostInt 10B8B BadCRC Handshk }
[ 2.727057] ata5.00: failed command: READ FPDMA QUEUED
[ 2.727277] ata5.00: cmd 60/08:00:00:00:00/00:00:00:00:00/40 tag 0 ncq 4096 in
res 40/00:04:00:00:00/00:00:00:00:00/40 Emask 0x50 (ATA bus error)
[ 2.728116] ata5.00: status: { DRDY }
[ 2.728231] ata5: hard resetting link
[ 2.736521] sda: sda1 sda2 < sda5 >
[ 2.736973] sd 2:0:0:0: [sda] Attached SCSI disk
[ 2.744047] input: Plus More Enterprise LTD. USB-compliant keyboard as /devices/pci0000:00/0000:00:13.0/usb1/1-1/1-1:1.0/input/input1
[ 2.744380] hid-generic 0003:0518:0001.0001: input,hidraw0: USB HID v1.10 Keyboard [Plus More Enterprise LTD. USB-compliant keyboard] on usb-0000:00:13.0-1/input0
[ 2.744812] input: Plus More Enterprise LTD. USB-compliant keyboard as /devices/pci0000:00/0000:00:13.0/usb1/1-1/1-1:1.1/input/input2
[ 2.745088] hid-generic 0003:0518:0001.0002: input,hidraw1: USB HID v1.10 Mouse [Plus More Enterprise LTD. USB-compliant keyboard] on usb-0000:00:13.0-1/input1
[ 2.990025] usb 1-2: new low-speed USB device number 5 using ohci-pci
[ 3.156230] input: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:13.0/usb1/1-2/1-2:1.0/input/input3
[ 3.156413] hid-generic 0003:045E:0040.0003: input,hidraw2: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)] on usb-0000:00:13.0-2/input0
[ 3.213356] ata5: softreset failed (device not ready)
[ 3.213519] ata5: applying PMP SRST workaround and retrying
[ 3.380031] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3.386448] ata5.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 3.392796] ata5.00: failed to IDENTIFY (I/O error, err_mask=0x100)
[ 3.392798] ata5.00: revalidation failed (errno=-5)
[ 8.380028] ata5: hard resetting link
[ 8.866697] ata5: softreset failed (device not ready)
[ 8.866861] ata5: applying PMP SRST workaround and retrying
[ 9.033366] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 9.039792] ata5.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 9.046258] ata5.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 9.046260] ata5.00: configured for UDMA/133
[ 9.046276] ata5: EH complete
[ 9.052053] sdc: sdc1
[ 9.052397] sdc: detected capacity change from 0 to 1000204886016
[ 9.052488] sd 4:0:0:0: [sdc] Attached SCSI disk
[ 9.102207] ata5.00: exception Emask 0x50 SAct 0x1 SErr 0x680900 action 0x6 frozen
[ 9.102441] ata5.00: irq_stat 0x08000000, interface fatal error
[ 9.102622] ata5: SError: { UnrecovData HostInt 10B8B BadCRC Handshk }
[ 9.102820] ata5.00: failed command: READ FPDMA QUEUED
[ 9.102979] ata5.00: cmd 60/08:00:a8:6c:70/00:00:74:00:00/40 tag 0 ncq 4096 in
res 40/00:04:a8:6c:70/00:00:74:00:00/40 Emask 0x50 (ATA bus error)
[ 9.103442] ata5.00: status: { DRDY }
[ 9.103556] ata5: hard resetting link
[ 9.590022] ata5: softreset failed (device not ready)
[ 9.590182] ata5: applying PMP SRST workaround and retrying
[ 9.756697] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 9.763109] ata5.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 9.769456] ata5.00: failed to IDENTIFY (I/O error, err_mask=0x100)
[ 9.769458] ata5.00: revalidation failed (errno=-5)
[ 9.969270] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 14.756687] ata5: hard resetting link
[ 15.243350] ata5: softreset failed (device not ready)
[ 15.247493] ata5: applying PMP SRST workaround and retrying
[ 15.413369] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 15.419789] ata5.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 15.426253] ata5.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 15.426255] ata5.00: configured for UDMA/133
[ 15.426271] ata5: EH complete
[ 15.457509] ata5.00: exception Emask 0x50 SAct 0x1 SErr 0x680900 action 0x6 frozen
[ 15.466153] ata5.00: irq_stat 0x08000000, interface fatal error
[ 15.470623] ata5: SError: { UnrecovData HostInt 10B8B BadCRC Handshk }
[ 15.475077] ata5.00: failed command: READ FPDMA QUEUED
[ 15.479477] ata5.00: cmd 60/08:00:f8:69:70/00:00:74:00:00/40 tag 0 ncq 4096 in
res 40/00:04:f8:69:70/00:00:74:00:00/40 Emask 0x50 (ATA bus error)
[ 15.497016] ata5.00: status: { DRDY }
[ 15.501349] ata5: hard resetting link
[ 15.986684] ata5: softreset failed (device not ready)
[ 15.990999] ata5: applying PMP SRST workaround and retrying
[ 16.156695] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 16.163100] ata5.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 16.169558] ata5.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 16.169560] ata5.00: configured for UDMA/133
[ 16.169567] ata5: EH complete
[ 16.230439] ata5: limiting SATA link speed to 1.5 Gbps
[ 16.230445] ata5.00: exception Emask 0x50 SAct 0x1c SErr 0x680900 action 0x6 frozen
[ 16.239215] ata5.00: irq_stat 0x08000000, interface fatal error
[ 16.243744] ata5: SError: { UnrecovData HostInt 10B8B BadCRC Handshk }
[ 16.248330] ata5.00: failed command: READ FPDMA QUEUED
[ 16.252861] ata5.00: cmd 60/38:10:40:00:00/00:00:00:00:00/40 tag 2 ncq 28672 in
res 40/00:24:78:01:00/00:00:00:00:00/40 Emask 0x50 (ATA bus error)
[ 16.270799] ata5.00: status: { DRDY }
[ 16.275275] ata5.00: failed command: READ FPDMA QUEUED
[ 16.279713] ata5.00: cmd 60/f8:18:80:00:00/00:00:00:00:00/40 tag 3 ncq 126976 in
res 40/00:24:78:01:00/00:00:00:00:00/40 Emask 0x50 (ATA bus error)
[ 16.297504] ata5.00: status: { DRDY }
[ 16.302022] ata5.00: failed command: READ FPDMA QUEUED
[ 16.306524] ata5.00: cmd 60/88:20:78:01:00/00:00:00:00:00/40 tag 4 ncq 69632 in
res 40/00:24:78:01:00/00:00:00:00:00/40 Emask 0x50 (ATA bus error)
[ 16.324306] ata5.00: status: { DRDY }
[ 16.328707] ata5: hard resetting link
[ 16.813352] ata5: softreset failed (device not ready)
[ 16.817758] ata5: applying PMP SRST workaround and retrying
[ 16.983368] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 16.989783] ata5.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 16.996261] ata5.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 16.996263] ata5.00: configured for UDMA/133
[ 16.996279] ata5: EH complete
[ 17.672607] systemd[1]: systemd 208 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
[ 17.677851] systemd[1]: Set hostname to <ROTATION-STATION>.
[ 18.109971] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
[ 18.109984] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
[ 18.110330] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[ 18.110410] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 18.110428] systemd[1]: Expecting device sys-subsystem-net-devices-enp2s0.device...
[ 18.110443] systemd[1]: Starting Remote File Systems.
[ 18.110456] systemd[1]: Reached target Remote File Systems.
[ 18.110468] systemd[1]: Starting Delayed Shutdown Socket.
[ 18.110505] systemd[1]: Listening on Delayed Shutdown Socket.
[ 18.110517] systemd[1]: Starting LVM2 metadata daemon socket.
[ 18.110546] systemd[1]: Listening on LVM2 metadata daemon socket.
[ 18.110558] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[ 18.110583] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 18.110595] systemd[1]: Starting Device-mapper event daemon FIFOs.
[ 18.110624] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 18.110638] systemd[1]: Starting Encrypted Volumes.
[ 18.110651] systemd[1]: Reached target Encrypted Volumes.
[ 18.110664] systemd[1]: Starting Journal Socket.
[ 18.110711] systemd[1]: Listening on Journal Socket.
[ 18.110728] systemd[1]: Starting Setup Virtual Console...
[ 18.138476] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 18.139007] systemd[1]: Mounting Huge Pages File System...
[ 18.139550] systemd[1]: Starting Journal Service...
[ 18.140217] systemd[1]: Started Journal Service.
[ 18.406055] systemd-journald[127]: Vacuuming done, freed 0 bytes
[ 18.685974] EXT4-fs (sda1): re-mounted. Opts: data=ordered
[ 18.806623] systemd-udevd[155]: starting version 208
[ 19.322248] parport_pc 00:0a: reported by Plug and Play ACPI
[ 19.322309] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 19.331550] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4
[ 19.331559] ACPI: Power Button [PWRB]
[ 19.331882] ACPI: Fan [FAN] (on)
[ 19.332660] ACPI: [Package] has zero elements (ffff8800bf306e80)
[ 19.337757] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[ 19.337764] ACPI: Power Button [PWRF]
[ 19.337878] ACPI: Invalid passive threshold
[ 19.338149] thermal LNXTHERM:00: registered as thermal_zone0
[ 19.338151] ACPI: Thermal Zone [THRM] (40 C)
[ 19.387889] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 19.388553] wmi: Mapper loaded
[ 19.549117] ACPI Warning: 0x0000000000000b00-0x0000000000000b07 SystemIO conflicts with Region \SOR2 1 (20130725/utaddress-251)
[ 19.549126] ACPI Warning: 0x0000000000000b00-0x0000000000000b07 SystemIO conflicts with Region \SOR1 2 (20130725/utaddress-251)
[ 19.549131] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 19.717185] MCE: In-kernel MCE decoding enabled.
[ 19.733875] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
[ 19.746781] input: PC Speaker as /devices/platform/pcspkr/input/input6
[ 19.780737] [drm] Initialized drm 1.1.0 20060810
[ 19.801750] EDAC MC: Ver: 3.0.0
[ 19.808239] sky2: driver version 1.30
[ 19.808388] sky2 0000:02:00.0: Yukon-2 EC Ultra chip revision 5
[ 19.808451] sky2 0000:02:00.0: irq 43 for MSI/MSI-X
[ 19.808698] sky2 0000:02:00.0 eth0: addr 00:30:18:a6:19:e3
[ 19.835294] snd_hda_intel 0000:00:14.2: irq 44 for MSI/MSI-X
[ 19.870517] AMD64 EDAC driver v3.4.0
[ 19.895226] microcode: AMD CPU family 0xf not supported
[ 19.929703] systemd-udevd[156]: renamed network interface eth0 to enp2s0
[ 20.021077] kvm: Nested Virtualization enabled
[ 20.073770] [Firmware Bug]: powernow-k8: No compatible ACPI _PSS objects found.
[Firmware Bug]: powernow-k8: First, make sure Cool'N'Quiet is enabled in the BIOS.
[Firmware Bug]: powernow-k8: If that doesn't help, try upgrading your BIOS.
[ 20.088804] checking generic (f9000000 130000) vs hw (d0000000 10000000)
[ 20.088805] checking generic (f9000000 130000) vs hw (f8000000 2000000)
[ 20.088806] fb: conflicting fb hw usage nouveaufb vs VESA VGA - removing generic driver
[ 20.100569] Console: switching to colour dummy device 80x25
[ 20.101154] [drm] hdmi device not found 1 0 1
[ 20.101224] nouveau [ DEVICE][0000:01:00.0] BOOT0 : 0x086c00a2
[ 20.101227] nouveau [ DEVICE][0000:01:00.0] Chipset: G86 (NV86)
[ 20.101229] nouveau [ DEVICE][0000:01:00.0] Family : NV50
[ 20.101830] nouveau [ VBIOS][0000:01:00.0] checking PRAMIN for image...
[ 20.113952] [Firmware Bug]: powernow-k8: No compatible ACPI _PSS objects found.
[Firmware Bug]: powernow-k8: First, make sure Cool'N'Quiet is enabled in the BIOS.
[Firmware Bug]: powernow-k8: If that doesn't help, try upgrading your BIOS.
[ 20.157989] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
[ 20.158048] sp5100_tco: PCI Revision ID: 0x13
[ 20.158077] sp5100_tco: failed to find MMIO address, giving up.
[ 20.162297] nouveau [ VBIOS][0000:01:00.0] ... appears to be valid
[ 20.162300] nouveau [ VBIOS][0000:01:00.0] using image from PRAMIN
[ 20.162421] nouveau [ VBIOS][0000:01:00.0] BIT signature found
[ 20.162424] nouveau [ VBIOS][0000:01:00.0] version 60.86.65.00.51
[ 20.182582] nouveau [ PFB][0000:01:00.0] RAM type: DDR2
[ 20.182585] nouveau [ PFB][0000:01:00.0] RAM size: 512 MiB
[ 20.182586] nouveau [ PFB][0000:01:00.0] ZCOMP: 1292 tags
[ 20.204429] nouveau [ PTHERM][0000:01:00.0] FAN control: none / external
[ 20.204439] nouveau [ PTHERM][0000:01:00.0] fan management: disabled
[ 20.204442] nouveau [ PTHERM][0000:01:00.0] internal sensor: yes
[ 20.204613] [TTM] Zone kernel: Available graphics memory: 2026408 kiB
[ 20.204615] [TTM] Initializing pool allocator
[ 20.204619] [TTM] Initializing DMA pool allocator
[ 20.204630] nouveau [ DRM] VRAM: 512 MiB
[ 20.204632] nouveau [ DRM] GART: 1048576 MiB
[ 20.204636] nouveau [ DRM] TMDS table version 2.0
[ 20.204638] nouveau [ DRM] DCB version 4.0
[ 20.204641] nouveau [ DRM] DCB outp 00: 01000302 00020030
[ 20.204644] nouveau [ DRM] DCB outp 01: 02000300 00020028
[ 20.204646] nouveau [ DRM] DCB outp 02: 02011312 00020030
[ 20.204648] nouveau [ DRM] DCB outp 03: 04011310 00c0c028
[ 20.204650] nouveau [ DRM] DCB outp 04: 010223f1 00c0c080
[ 20.204652] nouveau [ DRM] DCB conn 00: 2030
[ 20.204655] nouveau [ DRM] DCB conn 01: 1130
[ 20.204657] nouveau [ DRM] DCB conn 02: 0210
[ 20.204659] nouveau [ DRM] DCB conn 03: 0211
[ 20.204660] nouveau [ DRM] DCB conn 04: 0213
[ 20.210863] nouveau W[ DRM] failed to create encoder 0/1/0: -19
[ 20.210865] nouveau W[ DRM] TV-1 has no encoders, removing
[ 20.210895] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 20.210897] [drm] No driver support for vblank timestamp query.
[ 20.211027] nouveau [ DRM] 1 available performance level(s)
[ 20.211031] nouveau [ DRM] 0: core 500MHz shader 1250MHz memory 400MHz fanspeed 100%
[ 20.211033] nouveau [ DRM] c: core 459MHz shader 918MHz memory 399MHz voltage 1320mV
[ 20.214375] ppdev: user-space parallel port driver
[ 20.218673] nouveau [ DRM] MM: using CRYPT for buffer copies
[ 20.270146] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input14
[ 20.276729] input: HDA ATI SB Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input13
[ 20.276801] input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input12
[ 20.276871] input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input11
[ 20.276937] input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
[ 20.277003] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
[ 20.277072] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input8
[ 20.277146] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input7
[ 20.288590] nouveau [ DRM] allocated 1680x1050 fb: 0x70000, bo ffff88013974c000
[ 20.288622] EDAC amd64: DRAM ECC disabled.
[ 20.288629] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
[ 20.288675] fbcon: nouveaufb (fb0) is primary device
[ 20.376049] Console: switching to colour frame buffer device 128x48
[ 20.376338] nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device
[ 20.376340] nouveau 0000:01:00.0: registered panic notifier
[ 20.376346] [drm] Initialized nouveau 1.1.1 20120801 for 0000:01:00.0 on minor 0
[ 20.568688] Adding 2500432k swap on /dev/sda5. Priority:-1 extents:1 across:2500432k FS
[ 20.811563] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: data=ordered
[ 20.855298] systemd-journald[127]: Received request to flush runtime journal from PID 1
[ 22.153827] sky2 0000:02:00.0 enp2s0: enabling interface
[ 22.153887] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[ 24.883373] sky2 0000:02:00.0 enp2s0: Link is up at 1000 Mbps, full duplex, flow control both
[ 24.883402] IPv6: ADDRCONF(NETDEV_CHANGE): enp2s0: link becomes ready
[ 102.400031] ata4.00: exception Emask 0x0 SAct 0x2 SErr 0x0 action 0x6 frozen
[ 102.400038] ata4.00: failed command: READ FPDMA QUEUED
[ 102.400044] ata4.00: cmd 60/c8:08:40:0e:00/00:00:94:00:00/40 tag 1 ncq 102400 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 102.400046] ata4.00: status: { DRDY }
[ 102.400051] ata4: hard resetting link
[ 102.933349] ata4: softreset failed (device not ready)
[ 102.933356] ata4: applying PMP SRST workaround and retrying
[ 103.100029] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 103.101156] ata4.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 103.102323] ata4.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 103.102326] ata4.00: configured for UDMA/133
[ 103.102330] ata4.00: device reported invalid CHS sector 0
[ 103.102340] sd 3:0:0:0: [sdb]
[ 103.102342] Result: hostbyte=0x00 driverbyte=0x08
[ 103.102344] sd 3:0:0:0: [sdb]
[ 103.102345] Sense Key : 0xb [current] [descriptor]
[ 103.102348] Descriptor sense data with sense descriptors (in hex):
[ 103.102349] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 103.102355] 00 00 00 00
[ 103.102358] sd 3:0:0:0: [sdb]
[ 103.102359] ASC=0x0 ASCQ=0x0
[ 103.102361] sd 3:0:0:0: [sdb] CDB:
[ 103.102363] cdb[0]=0x28: 28 00 94 00 0e 40 00 00 c8 00
[ 103.102369] end_request: I/O error, dev sdb, sector 2483031616
[ 103.102415] ata4: EH complete
[ 103.157724] EXT4-fs error (device sdb1): __ext4_get_inode_loc:3917: inode #77597314: block 310378696: comm Plex Media Serv: unable to read itable block
[ 133.386698] ata4.00: exception Emask 0x0 SAct 0x1ffffe0 SErr 0x0 action 0x6 frozen
[ 133.386706] ata4.00: failed command: READ FPDMA QUEUED
[ 133.386711] ata4.00: cmd 60/08:28:70:0e:00/00:00:94:00:00/40 tag 5 ncq 4096 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 133.386714] ata4.00: status: { DRDY }
[ 133.386716] ata4.00: failed command: READ FPDMA QUEUED
[ 133.386721] ata4.00: cmd 60/08:30:78:0e:00/00:00:94:00:00/40 tag 6 ncq 4096 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 133.386723] ata4.00: status: { DRDY }
[ 133.386725] ata4.00: failed command: READ FPDMA QUEUED
[ 133.386729] ata4.00: cmd 60/08:38:80:0e:00/00:00:94:00:00/40 tag 7 ncq 4096 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 133.386731] ata4.00: status: { DRDY }
[ 133.386733] ata4.00: failed command: READ FPDMA QUEUED
[ 133.386738] ata4.00: cmd 60/08:40:88:0e:00/00:00:94:00:00/40 tag 8 ncq 4096 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 133.386740] ata4.00: status: { DRDY }
[ 133.386742] ata4.00: failed command: READ FPDMA QUEUED
[ 133.386746] ata4.00: cmd 60/08:48:90:0e:00/00:00:94:00:00/40 tag 9 ncq 4096 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 133.386748] ata4.00: status: { DRDY }
[ 133.386750] ata4.00: failed command: READ FPDMA QUEUED
[ 133.386755] ata4.00: cmd 60/08:50:98:0e:00/00:00:94:00:00/40 tag 10 ncq 4096 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 133.386757] ata4.00: status: { DRDY }
[ 133.386759] ata4.00: failed command: READ FPDMA QUEUED
[ 133.386763] ata4.00: cmd 60/08:58:a0:0e:00/00:00:94:00:00/40 tag 11 ncq 4096 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 133.386765] ata4.00: status: { DRDY }
[ 133.386767] ata4.00: failed command: READ FPDMA QUEUED
[ 133.386772] ata4.00: cmd 60/08:60:a8:0e:00/00:00:94:00:00/40 tag 12 ncq 4096 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 133.386774] ata4.00: status: { DRDY }
[ 133.386776] ata4.00: failed command: READ FPDMA QUEUED
[ 133.386780] ata4.00: cmd 60/08:68:b0:0e:00/00:00:94:00:00/40 tag 13 ncq 4096 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 133.386783] ata4.00: status: { DRDY }
[ 133.386784] ata4.00: failed command: READ FPDMA QUEUED
[ 133.386789] ata4.00: cmd 60/08:70:b8:0e:00/00:00:94:00:00/40 tag 14 ncq 4096 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 133.386791] ata4.00: status: { DRDY }
[ 133.386793] ata4.00: failed command: READ FPDMA QUEUED
[ 133.386797] ata4.00: cmd 60/08:78:c0:0e:00/00:00:94:00:00/40 tag 15 ncq 4096 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 133.386800] ata4.00: status: { DRDY }
[ 133.386801] ata4.00: failed command: READ FPDMA QUEUED
[ 133.386806] ata4.00: cmd 60/08:80:c8:0e:00/00:00:94:00:00/40 tag 16 ncq 4096 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 133.386808] ata4.00: status: { DRDY }
[ 133.386810] ata4.00: failed command: READ FPDMA QUEUED
[ 133.386814] ata4.00: cmd 60/08:88:d0:0e:00/00:00:94:00:00/40 tag 17 ncq 4096 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 133.386817] ata4.00: status: { DRDY }
[ 133.386819] ata4.00: failed command: READ FPDMA QUEUED
[ 133.386823] ata4.00: cmd 60/08:90:d8:0e:00/00:00:94:00:00/40 tag 18 ncq 4096 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 133.386825] ata4.00: status: { DRDY }
[ 133.386827] ata4.00: failed command: READ FPDMA QUEUED
[ 133.386832] ata4.00: cmd 60/08:98:e0:0e:00/00:00:94:00:00/40 tag 19 ncq 4096 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 133.386834] ata4.00: status: { DRDY }
[ 133.386836] ata4.00: failed command: READ FPDMA QUEUED
[ 133.386840] ata4.00: cmd 60/08:a0:e8:0e:00/00:00:94:00:00/40 tag 20 ncq 4096 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 133.386842] ata4.00: status: { DRDY }
[ 133.386844] ata4.00: failed command: READ FPDMA QUEUED
[ 133.386849] ata4.00: cmd 60/08:a8:f0:0e:00/00:00:94:00:00/40 tag 21 ncq 4096 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 133.386851] ata4.00: status: { DRDY }
[ 133.386853] ata4.00: failed command: READ FPDMA QUEUED
[ 133.386857] ata4.00: cmd 60/08:b0:f8:0e:00/00:00:94:00:00/40 tag 22 ncq 4096 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 133.386859] ata4.00: status: { DRDY }
[ 133.386861] ata4.00: failed command: READ FPDMA QUEUED
[ 133.386866] ata4.00: cmd 60/08:b8:00:0f:00/00:00:94:00:00/40 tag 23 ncq 4096 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 133.386868] ata4.00: status: { DRDY }
[ 133.386870] ata4.00: failed command: READ FPDMA QUEUED
[ 133.386874] ata4.00: cmd 60/08:c0:40:0e:00/00:00:94:00:00/40 tag 24 ncq 4096 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 133.386876] ata4.00: status: { DRDY }
[ 133.386880] ata4: hard resetting link
[ 134.513346] ata4: softreset failed (device not ready)
[ 134.513353] ata4: applying PMP SRST workaround and retrying
[ 134.680026] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 134.681147] ata4.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 134.682319] ata4.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 134.682322] ata4.00: configured for UDMA/133
[ 134.682326] ata4.00: device reported invalid CHS sector 0
[ 134.682328] ata4.00: device reported invalid CHS sector 0
[ 134.682330] ata4.00: device reported invalid CHS sector 0
[ 134.682332] ata4.00: device reported invalid CHS sector 0
[ 134.682334] ata4.00: device reported invalid CHS sector 0
[ 134.682336] ata4.00: device reported invalid CHS sector 0
[ 134.682338] ata4.00: device reported invalid CHS sector 0
[ 134.682340] ata4.00: device reported invalid CHS sector 0
[ 134.682342] ata4.00: device reported invalid CHS sector 0
[ 134.682344] ata4.00: device reported invalid CHS sector 0
[ 134.682346] ata4.00: device reported invalid CHS sector 0
[ 134.682348] ata4.00: device reported invalid CHS sector 0
[ 134.682350] ata4.00: device reported invalid CHS sector 0
[ 134.682352] ata4.00: device reported invalid CHS sector 0
[ 134.682354] ata4.00: device reported invalid CHS sector 0
[ 134.682356] ata4.00: device reported invalid CHS sector 0
[ 134.682357] ata4.00: device reported invalid CHS sector 0
[ 134.682359] ata4.00: device reported invalid CHS sector 0
[ 134.682361] ata4.00: device reported invalid CHS sector 0
[ 134.682363] ata4.00: device reported invalid CHS sector 0
[ 134.682374] sd 3:0:0:0: [sdb]
[ 134.682375] Result: hostbyte=0x00 driverbyte=0x08
[ 134.682377] sd 3:0:0:0: [sdb]
[ 134.682379] Sense Key : 0xb [current] [descriptor]
[ 134.682381] Descriptor sense data with sense descriptors (in hex):
[ 134.682382] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 134.682388] 00 00 00 00
[ 134.682391] sd 3:0:0:0: [sdb]
[ 134.682393] ASC=0x0 ASCQ=0x0
[ 134.682395] sd 3:0:0:0: [sdb] CDB:
[ 134.682396] cdb[0]=0x28: 28 00 94 00 0e 70 00 00 08 00
[ 134.682402] end_request: I/O error, dev sdb, sector 2483031664
[ 134.682415] sd 3:0:0:0: [sdb]
[ 134.682416] Result: hostbyte=0x00 driverbyte=0x08
[ 134.682418] sd 3:0:0:0: [sdb]
[ 134.682419] Sense Key : 0xb [current] [descriptor]
[ 134.682421] Descriptor sense data with sense descriptors (in hex):
[ 134.682422] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 134.682428] 00 00 00 00
[ 134.682431] sd 3:0:0:0: [sdb]
[ 134.682432] ASC=0x0 ASCQ=0x0
[ 134.682434] sd 3:0:0:0: [sdb] CDB:
[ 134.682435] cdb[0]=0x28: 28 00 94 00 0e 78 00 00 08 00
[ 134.682440] end_request: I/O error, dev sdb, sector 2483031672
[ 134.682445] sd 3:0:0:0: [sdb]
[ 134.682447] Result: hostbyte=0x00 driverbyte=0x08
[ 134.682448] sd 3:0:0:0: [sdb]
[ 134.682449] Sense Key : 0xb [current] [descriptor]
[ 134.682451] Descriptor sense data with sense descriptors (in hex):
[ 134.682452] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 134.682458] 00 00 00 00
[ 134.682461] sd 3:0:0:0: [sdb]
[ 134.682462] ASC=0x0 ASCQ=0x0
[ 134.682464] sd 3:0:0:0: [sdb] CDB:
[ 134.682465] cdb[0]=0x28: 28 00 94 00 0e 80 00 00 08 00
[ 134.682470] end_request: I/O error, dev sdb, sector 2483031680
[ 134.682475] sd 3:0:0:0: [sdb]
[ 134.682476] Result: hostbyte=0x00 driverbyte=0x08
[ 134.682478] sd 3:0:0:0: [sdb]
[ 134.682479] Sense Key : 0xb [current] [descriptor]
[ 134.682481] Descriptor sense data with sense descriptors (in hex):
[ 134.682482] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 134.682488] 00 00 00 00
[ 134.682491] sd 3:0:0:0: [sdb]
[ 134.682492] ASC=0x0 ASCQ=0x0
[ 134.682494] sd 3:0:0:0: [sdb] CDB:
[ 134.682495] cdb[0]=0x28: 28 00 94 00 0e 88 00 00 08 00
[ 134.682500] end_request: I/O error, dev sdb, sector 2483031688
[ 134.682505] sd 3:0:0:0: [sdb]
[ 134.682506] Result: hostbyte=0x00 driverbyte=0x08
[ 134.682508] sd 3:0:0:0: [sdb]
[ 134.682509] Sense Key : 0xb [current] [descriptor]
[ 134.682511] Descriptor sense data with sense descriptors (in hex):
[ 134.682512] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 134.682518] 00 00 00 00
[ 134.682522] sd 3:0:0:0: [sdb]
[ 134.682523] ASC=0x0 ASCQ=0x0
[ 134.682524] sd 3:0:0:0: [sdb] CDB:
[ 134.682526] cdb[0]=0x28: 28 00 94 00 0e 90 00 00 08 00
[ 134.682531] end_request: I/O error, dev sdb, sector 2483031696
[ 134.682535] sd 3:0:0:0: [sdb]
[ 134.682537] Result: hostbyte=0x00 driverbyte=0x08
[ 134.682538] sd 3:0:0:0: [sdb]
[ 134.682539] Sense Key : 0xb [current] [descriptor]
[ 134.682541] Descriptor sense data with sense descriptors (in hex):
[ 134.682542] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 134.682548] 00 00 00 00
[ 134.682552] sd 3:0:0:0: [sdb]
[ 134.682553] ASC=0x0 ASCQ=0x0
[ 134.682554] sd 3:0:0:0: [sdb] CDB:
[ 134.682556] cdb[0]=0x28: 28 00 94 00 0e 98 00 00 08 00
[ 134.682561] end_request: I/O error, dev sdb, sector 2483031704
[ 134.682565] sd 3:0:0:0: [sdb]
[ 134.682567] Result: hostbyte=0x00 driverbyte=0x08
[ 134.682568] sd 3:0:0:0: [sdb]
[ 134.682569] Sense Key : 0xb [current] [descriptor]
[ 134.682571] Descriptor sense data with sense descriptors (in hex):
[ 134.682572] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 134.682578] 00 00 00 00
[ 134.682582] sd 3:0:0:0: [sdb]
[ 134.682583] ASC=0x0 ASCQ=0x0
[ 134.682584] sd 3:0:0:0: [sdb] CDB:
[ 134.682586] cdb[0]=0x28: 28 00 94 00 0e a0 00 00 08 00
[ 134.682590] end_request: I/O error, dev sdb, sector 2483031712
[ 134.682596] sd 3:0:0:0: [sdb]
[ 134.682597] Result: hostbyte=0x00 driverbyte=0x08
[ 134.682599] sd 3:0:0:0: [sdb]
[ 134.682600] Sense Key : 0xb [current] [descriptor]
[ 134.682601] Descriptor sense data with sense descriptors (in hex):
[ 134.682603] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 134.682609] 00 00 00 00
[ 134.682612] sd 3:0:0:0: [sdb]
[ 134.682613] ASC=0x0 ASCQ=0x0
[ 134.682615] sd 3:0:0:0: [sdb] CDB:
[ 134.682616] cdb[0]=0x28: 28 00 94 00 0e a8 00 00 08 00
[ 134.682621] end_request: I/O error, dev sdb, sector 2483031720
[ 134.682626] sd 3:0:0:0: [sdb]
[ 134.682627] Result: hostbyte=0x00 driverbyte=0x08
[ 134.682629] sd 3:0:0:0: [sdb]
[ 134.682630] Sense Key : 0xb [current] [descriptor]
[ 134.682631] Descriptor sense data with sense descriptors (in hex):
[ 134.682632] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 134.682638] 00 00 00 00
[ 134.682642] sd 3:0:0:0: [sdb]
[ 134.682643] ASC=0x0 ASCQ=0x0
[ 134.682645] sd 3:0:0:0: [sdb] CDB:
[ 134.682646] cdb[0]=0x28: 28 00 94 00 0e b0 00 00 08 00
[ 134.682651] end_request: I/O error, dev sdb, sector 2483031728
[ 134.682656] sd 3:0:0:0: [sdb]
[ 134.682657] Result: hostbyte=0x00 driverbyte=0x08
[ 134.682659] sd 3:0:0:0: [sdb]
[ 134.682660] Sense Key : 0xb [current] [descriptor]
[ 134.682661] Descriptor sense data with sense descriptors (in hex):
[ 134.682662] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 134.682669] 00 00 00 00
[ 134.682672] sd 3:0:0:0: [sdb]
[ 134.682673] ASC=0x0 ASCQ=0x0
[ 134.682675] sd 3:0:0:0: [sdb] CDB:
[ 134.682676] cdb[0]=0x28: 28 00 94 00 0e b8 00 00 08 00
[ 134.682681] end_request: I/O error, dev sdb, sector 2483031736
[ 134.682686] sd 3:0:0:0: [sdb]
[ 134.682687] Result: hostbyte=0x00 driverbyte=0x08
[ 134.682689] sd 3:0:0:0: [sdb]
[ 134.682690] Sense Key : 0xb [current] [descriptor]
[ 134.682691] Descriptor sense data with sense descriptors (in hex):
[ 134.682692] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 134.682699] 00 00 00 00
[ 134.682702] sd 3:0:0:0: [sdb]
[ 134.682703] ASC=0x0 ASCQ=0x0
[ 134.682705] sd 3:0:0:0: [sdb] CDB:
[ 134.682706] cdb[0]=0x28: 28 00 94 00 0e c0 00 00 08 00
[ 134.682716] sd 3:0:0:0: [sdb]
[ 134.682717] Result: hostbyte=0x00 driverbyte=0x08
[ 134.682719] sd 3:0:0:0: [sdb]
[ 134.682720] Sense Key : 0xb [current] [descriptor]
[ 134.682722] Descriptor sense data with sense descriptors (in hex):
[ 134.682722] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 134.682728] 00 00 00 00
[ 134.682732] sd 3:0:0:0: [sdb]
[ 134.682733] ASC=0x0 ASCQ=0x0
[ 134.682735] sd 3:0:0:0: [sdb] CDB:
[ 134.682736] cdb[0]=0x28: 28 00 94 00 0e c8 00 00 08 00
[ 134.682744] sd 3:0:0:0: [sdb]
[ 134.682746] Result: hostbyte=0x00 driverbyte=0x08
[ 134.682747] sd 3:0:0:0: [sdb]
[ 134.682748] Sense Key : 0xb [current] [descriptor]
[ 134.682750] Descriptor sense data with sense descriptors (in hex):
[ 134.682751] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 134.682757] 00 00 00 00
[ 134.682760] sd 3:0:0:0: [sdb]
[ 134.682762] ASC=0x0 ASCQ=0x0
[ 134.682763] sd 3:0:0:0: [sdb] CDB:
[ 134.682764] cdb[0]=0x28: 28 00 94 00 0e d0 00 00 08 00
[ 134.682773] sd 3:0:0:0: [sdb]
[ 134.682774] Result: hostbyte=0x00 driverbyte=0x08
[ 134.682776] sd 3:0:0:0: [sdb]
[ 134.682777] Sense Key : 0xb [current] [descriptor]
[ 134.682779] Descriptor sense data with sense descriptors (in hex):
[ 134.682780] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 134.682786] 00 00 00 00
[ 134.682789] sd 3:0:0:0: [sdb]
[ 134.682790] ASC=0x0 ASCQ=0x0
[ 134.682792] sd 3:0:0:0: [sdb] CDB:
[ 134.682793] cdb[0]=0x28: 28 00 94 00 0e d8 00 00 08 00
[ 134.682801] sd 3:0:0:0: [sdb]
[ 134.682803] Result: hostbyte=0x00 driverbyte=0x08
[ 134.682804] sd 3:0:0:0: [sdb]
[ 134.682805] Sense Key : 0xb [current] [descriptor]
[ 134.682807] Descriptor sense data with sense descriptors (in hex):
[ 134.682808] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 134.682814] 00 00 00 00
[ 134.682818] sd 3:0:0:0: [sdb]
[ 134.682819] ASC=0x0 ASCQ=0x0
[ 134.682820] sd 3:0:0:0: [sdb] CDB:
[ 134.682822] cdb[0]=0x28: 28 00 94 00 0e e0 00 00 08 00
[ 134.682830] sd 3:0:0:0: [sdb]
[ 134.682831] Result: hostbyte=0x00 driverbyte=0x08
[ 134.682833] sd 3:0:0:0: [sdb]
[ 134.682834] Sense Key : 0xb [current] [descriptor]
[ 134.682835] Descriptor sense data with sense descriptors (in hex):
[ 134.682836] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 134.682843] 00 00 00 00
[ 134.682846] sd 3:0:0:0: [sdb]
[ 134.682847] ASC=0x0 ASCQ=0x0
[ 134.682849] sd 3:0:0:0: [sdb] CDB:
[ 134.682850] cdb[0]=0x28: 28 00 94 00 0e e8 00 00 08 00
[ 134.682858] sd 3:0:0:0: [sdb]
[ 134.682860] Result: hostbyte=0x00 driverbyte=0x08
[ 134.682861] sd 3:0:0:0: [sdb]
[ 134.682862] Sense Key : 0xb [current] [descriptor]
[ 134.682864] Descriptor sense data with sense descriptors (in hex):
[ 134.682865] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 134.682871] 00 00 00 00
[ 134.682875] sd 3:0:0:0: [sdb]
[ 134.682876] ASC=0x0 ASCQ=0x0
[ 134.682877] sd 3:0:0:0: [sdb] CDB:
[ 134.682879] cdb[0]=0x28: 28 00 94 00 0e f0 00 00 08 00
[ 134.682887] sd 3:0:0:0: [sdb]
[ 134.682888] Result: hostbyte=0x00 driverbyte=0x08
[ 134.682890] sd 3:0:0:0: [sdb]
[ 134.682891] Sense Key : 0xb [current] [descriptor]
[ 134.682893] Descriptor sense data with sense descriptors (in hex):
[ 134.682894] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 134.682900] 00 00 00 00
[ 134.682903] sd 3:0:0:0: [sdb]
[ 134.682904] ASC=0x0 ASCQ=0x0
[ 134.682906] sd 3:0:0:0: [sdb] CDB:
[ 134.682907] cdb[0]=0x28: 28 00 94 00 0e f8 00 00 08 00
[ 134.682915] sd 3:0:0:0: [sdb]
[ 134.682917] Result: hostbyte=0x00 driverbyte=0x08
[ 134.682918] sd 3:0:0:0: [sdb]
[ 134.682919] Sense Key : 0xb [current] [descriptor]
[ 134.682921] Descriptor sense data with sense descriptors (in hex):
[ 134.682922] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 134.682928] 00 00 00 00
[ 134.682932] sd 3:0:0:0: [sdb]
[ 134.682933] ASC=0x0 ASCQ=0x0
[ 134.682934] sd 3:0:0:0: [sdb] CDB:
[ 134.682936] cdb[0]=0x28: 28 00 94 00 0f 00 00 00 08 00
[ 134.682952] ata4: EH complete
[ 869.454913] type=1326 audit(1385973723.198:2): auid=4294967295 uid=99 gid=99 ses=4294967295 pid=1454 comm="sshd" sig=31 syscall=48 compat=0 ip=0x7f4e6e3cd5e7 code=0x0
[ 872.138585] type=1326 audit(1385973725.881:3): auid=4294967295 uid=99 gid=99 ses=4294967295 pid=1491 comm="sshd" sig=31 syscall=48 compat=0 ip=0x7f42f956c5e7 code=0x0Offline
Pages: 1