You are not logged in.

Pages: 1

#1 2013-12-20 03:13:09

develop7
Member
Registered: 2013-12-20
Posts: 12

Xorg Fails to Start (Catalyst 13.11 Beta)

Hello,
I have just installed the new catalyst 13.11 beta drivers. I blacklisted radeon, enabled nomodeset, and disabled kms. When I start X it gives me the "oh no something has gone wrong..." screen. Here is my X log

[   778.047] 
X.Org X Server 1.13.4
Release Date: 2013-04-17
[   778.134] X Protocol Version 11, Revision 0
[   778.163] Build Operating System: Linux 3.8.10-1-ARCH x86_64 
[   778.193] Current Operating System: Linux localhost 3.10.9-1-ARCH #1 SMP PREEMPT Wed Aug 21 13:49:35 CEST 2013 x86_64
[   778.193] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=/dev/mapper/root rw cryptdevice=/dev/linux/drive0:root quiet nomodeset
[   778.254] Build Date: 28 April 2013  01:19:17PM
[   778.283]  
[   778.313] Current version of pixman: 0.30.2
[   778.373] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[   778.373] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[   778.499] (==) Log file: "/var/log/Xorg.1.log", Time: Wed Dec 18 18:41:36 2013
[   778.532] (==) Using config file: "/etc/X11/xorg.conf"
[   778.565] (==) Using config directory: "/etc/X11/xorg.conf.d"
[   778.565] (==) ServerLayout "aticonfig Layout"
[   778.565] (**) |-->Screen "aticonfig-Screen[0]-0" (0)
[   778.565] (**) |   |-->Monitor "aticonfig-Monitor[0]-0"
[   778.565] (**) |   |-->Device "aticonfig-Device[0]-0"
[   778.565] (==) Automatically adding devices
[   778.565] (==) Automatically enabling devices
[   778.565] (==) Automatically adding GPU devices
[   778.565] (==) FontPath set to:
	/usr/share/fonts/misc/,
	/usr/share/fonts/TTF/,
	/usr/share/fonts/OTF/,
	/usr/share/fonts/Type1/,
	/usr/share/fonts/100dpi/,
	/usr/share/fonts/75dpi/
[   778.565] (==) ModulePath set to "/usr/lib/xorg/modules"
[   778.565] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[   778.565] (II) Loader magic: 0x7fbc20
[   778.565] (II) Module ABI versions:
[   778.565] 	X.Org ANSI C Emulation: 0.4
[   778.565] 	X.Org Video Driver: 13.1
[   778.565] 	X.Org XInput driver : 18.0
[   778.565] 	X.Org Server Extension : 7.0
[   778.566] (--) PCI:*(0:1:0:0) 1002:683d:174b:e244 rev 0, Mem @ 0xe0000000/268435456, 0xf0200000/262144, I/O @ 0x00002000/256, BIOS @ 0x????????/131072
[   778.599] Initializing built-in extension Generic Event Extension
[   778.632] Initializing built-in extension SHAPE
[   778.664] Initializing built-in extension MIT-SHM
[   778.696] Initializing built-in extension XInputExtension
[   778.728] Initializing built-in extension XTEST
[   778.759] Initializing built-in extension BIG-REQUESTS
[   778.789] Initializing built-in extension SYNC
[   778.819] Initializing built-in extension XKEYBOARD
[   778.848] Initializing built-in extension XC-MISC
[   778.876] Initializing built-in extension SECURITY
[   778.904] Initializing built-in extension XINERAMA
[   778.930] Initializing built-in extension XFIXES
[   778.957] Initializing built-in extension RENDER
[   778.982] Initializing built-in extension RANDR
[   779.006] Initializing built-in extension COMPOSITE
[   779.030] Initializing built-in extension DAMAGE
[   779.053] Initializing built-in extension MIT-SCREEN-SAVER
[   779.076] Initializing built-in extension DOUBLE-BUFFER
[   779.098] Initializing built-in extension RECORD
[   779.120] Initializing built-in extension DPMS
[   779.142] Initializing built-in extension X-Resource
[   779.163] Initializing built-in extension XVideo
[   779.185] Initializing built-in extension XVideo-MotionCompensation
[   779.206] Initializing built-in extension XFree86-VidModeExtension
[   779.227] Initializing built-in extension XFree86-DGA
[   779.247] Initializing built-in extension XFree86-DRI
[   779.267] Initializing built-in extension DRI2
[   779.267] (II) "glx" will be loaded by default.
[   779.267] (II) LoadModule: "glx"
[   779.267] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[   779.267] (II) Module glx: vendor="Advanced Micro Devices, Inc."
[   779.267] 	compiled for 6.9.0, module version = 1.0.0
[   779.287] Loading extension GLX
[   779.287] (II) LoadModule: "fglrx"
[   779.287] (II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
[   779.300] (II) Module fglrx: vendor="FireGL - AMD Technologies Inc."
[   779.300] 	compiled for 1.4.99.906, module version = 13.25.5
[   779.300] 	Module class: X.Org Video Driver
[   779.300] (II) Loading sub module "fglrxdrm"
[   779.300] (II) LoadModule: "fglrxdrm"
[   779.300] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[   779.300] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
[   779.300] 	compiled for 1.4.99.906, module version = 13.25.5
[   779.300] (II) AMD Proprietary Linux Driver Version Identifier:13.25.5
[   779.300] (II) AMD Proprietary Linux Driver Release Identifier: 13.251                               
[   779.300] (II) AMD Proprietary Linux Driver Build Date: Dec  6 2013 15:19:03
[   779.300] (++) using VT number 2

[   779.300] (WW) Falling back to old probe method for fglrx
[   779.332] (II) Loading PCS database from /etc/ati/amdpcsdb /etc/ati/amdpcsdb.default
[   779.336] ukiDynamicMajor: failed to open /proc/ati/major
[   779.336] ukiDynamicMajor: failed to open /proc/ati/major
[   779.339] (--) Chipset Supported AMD Graphics Processor (0x683D) found
[   779.339] (WW) fglrx: No matching Device section for instance (BusID PCI:0@1:0:1) found
[   779.339] (II) fglrx(0): pEnt->device->identifier=0x228dcb0
[   779.339] (II) fglrx(0): === [xdl_xs113_atiddxPreInit] === begin
[   779.339] (II) Loading sub module "vgahw"
[   779.340] (II) LoadModule: "vgahw"
[   779.340] (II) Loading /usr/lib/xorg/modules/libvgahw.so
[   779.340] (II) Module vgahw: vendor="X.Org Foundation"
[   779.340] 	compiled for 1.13.4, module version = 0.1.0
[   779.340] 	ABI class: X.Org Video Driver, version 13.1
[   779.341] (**) fglrx(0): Depth 24, (--) framebuffer bpp 32
[   779.341] (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[   779.341] (==) fglrx(0): Default visual is TrueColor
[   779.341] (**) fglrx(0): Option "DPMS" "true"
[   779.341] (==) fglrx(0): RGB weight 888
[   779.341] (II) fglrx(0): Using 8 bits per RGB 
[   779.341] (==) fglrx(0): Buffer Tiling is ON
[   779.341] (II) Loading sub module "fglrxdrm"
[   779.341] (II) LoadModule: "fglrxdrm"
[   779.341] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[   779.341] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
[   779.341] 	compiled for 1.4.99.906, module version = 13.25.5
[   779.343] ukiDynamicMajor: failed to open /proc/ati/major
[   779.343] ukiDynamicMajor: failed to open /proc/ati/major
[   779.343] (**) fglrx(0): NoAccel = NO
[   779.343] (**) fglrx(0): AMD 2D Acceleration Architecture enabled
[   779.343] (--) fglrx(0): Chipset: "AMD Radeon HD 7700 Series  " (Chipset = 0x683d)
[   779.343] (--) fglrx(0): (PciSubVendor = 0x174b, PciSubDevice = 0xe244)
[   779.343] (==) fglrx(0): board vendor info: third party graphics adapter - NOT original AMD
[   779.343] (--) fglrx(0): Linear framebuffer (phys) at 0xe0000000
[   779.343] (--) fglrx(0): MMIO registers at 0xf0200000
[   779.343] (--) fglrx(0): I/O port at 0x00002000
[   779.343] (==) fglrx(0): ROM-BIOS at 0x000c0000
[   779.348] (II) fglrx(0): Primary V_BIOS segment is: 0xc000
[   779.349] (II) Loading sub module "vbe"
[   779.349] (II) LoadModule: "vbe"
[   779.349] (II) Loading /usr/lib/xorg/modules/libvbe.so
[   779.349] (II) Module vbe: vendor="X.Org Foundation"
[   779.349] 	compiled for 1.13.4, module version = 1.1.0
[   779.349] 	ABI class: X.Org Video Driver, version 13.1
[   779.350] (II) fglrx(0): VESA BIOS detected
[   779.350] (II) fglrx(0): VESA VBE Version 3.0
[   779.350] (II) fglrx(0): VESA VBE Total Mem: 16384 kB
[   779.350] (II) fglrx(0): VESA VBE OEM: AMD ATOMBIOS
[   779.350] (II) fglrx(0): VESA VBE OEM Software Rev: 15.23
[   779.350] (II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2010, Advanced Micro Devices, Inc.
[   779.350] (II) fglrx(0): VESA VBE OEM Product: VERDE
[   779.350] (II) fglrx(0): VESA VBE OEM Product Rev: 01.00
[   779.363] (II) fglrx(0): AMD Video BIOS revision 9 or later detected
[   779.363] (--) fglrx(0): Video RAM: 1048576 kByte, Type: GDDR5
[   779.363] (II) fglrx(0): PCIE card detected
[   779.364] (--) fglrx(0): Using per-process page tables (PPPT) as GART.
[   779.364] (WW) fglrx(0): board is an unknown third party board, chipset is supported
[   779.364] (II) fglrx(0): [FB] MC range(MCFBBase = 0xf400000000, MCFBSize = 0x40000000)
[   779.364] (II) fglrx(0): RandR 1.2 support is enabled!
[   779.364] (II) fglrx(0): RandR 1.2 rotation support is enabled!
[   779.364] (==) fglrx(0): Center Mode is disabled 
[   779.364] (II) Loading sub module "fb"
[   779.364] (II) LoadModule: "fb"
[   779.364] (II) Loading /usr/lib/xorg/modules/libfb.so
[   779.364] (II) Module fb: vendor="X.Org Foundation"
[   779.364] 	compiled for 1.13.4, module version = 1.0.0
[   779.364] 	ABI class: X.Org ANSI C Emulation, version 0.4
[   779.364] (II) Loading sub module "ddc"
[   779.364] (II) LoadModule: "ddc"
[   779.364] (II) Module "ddc" already built-in
[   779.440] (II) fglrx(0): Output DFP1 using monitor section aticonfig-Monitor[0]-0
[   779.440] (II) fglrx(0): Output DFP2 has no monitor section
[   779.440] (II) fglrx(0): Output DFP3 has no monitor section
[   779.440] (II) fglrx(0): Output DFP4 has no monitor section
[   779.440] (II) fglrx(0): Output DFP5 has no monitor section
[   779.440] (II) fglrx(0): Output DFP6 has no monitor section
[   779.440] (II) fglrx(0): Output CRT1 has no monitor section
[   779.440] (II) Loading sub module "ddc"
[   779.440] (II) LoadModule: "ddc"
[   779.440] (II) Module "ddc" already built-in
[   779.440] (II) fglrx(0): Connected Display0: CRT1
[   779.440] (II) fglrx(0): Display0 EDID data ---------------------------
[   779.440] (II) fglrx(0): Manufacturer: VSC  Model: 220  Serial#: 16843009
[   779.440] (II) fglrx(0): Year: 2007  Week: 12
[   779.440] (II) fglrx(0): EDID Version: 1.3
[   779.440] (II) fglrx(0): Analog Display Input,  Input Voltage Level: 0.700/0.300 V
[   779.440] (II) fglrx(0): Sync:  Separate  Composite  SyncOnGreen
[   779.440] (II) fglrx(0): Max Image Size [cm]: horiz.: 41  vert.: 26
[   779.440] (II) fglrx(0): Gamma: 2.20
[   779.440] (II) fglrx(0): DPMS capabilities: Off; RGB/Color Display
[   779.440] (II) fglrx(0): Default color space is primary color space
[   779.440] (II) fglrx(0): First detailed timing is preferred mode
[   779.440] (II) fglrx(0): redX: 0.640 redY: 0.334   greenX: 0.286 greenY: 0.599
[   779.440] (II) fglrx(0): blueX: 0.154 blueY: 0.077   whiteX: 0.313 whiteY: 0.329
[   779.440] (II) fglrx(0): Supported established timings:
[   779.440] (II) fglrx(0): 720x400@70Hz
[   779.440] (II) fglrx(0): 640x480@60Hz
[   779.440] (II) fglrx(0): 640x480@67Hz
[   779.440] (II) fglrx(0): 640x480@72Hz
[   779.440] (II) fglrx(0): 640x480@75Hz
[   779.440] (II) fglrx(0): 800x600@56Hz
[   779.440] (II) fglrx(0): 800x600@60Hz
[   779.440] (II) fglrx(0): 800x600@72Hz
[   779.440] (II) fglrx(0): 800x600@75Hz
[   779.440] (II) fglrx(0): 832x624@75Hz
[   779.440] (II) fglrx(0): 1024x768@60Hz
[   779.440] (II) fglrx(0): 1024x768@70Hz
[   779.440] (II) fglrx(0): 1024x768@75Hz
[   779.440] (II) fglrx(0): 1280x1024@75Hz
[   779.440] (II) fglrx(0): 1152x864@75Hz
[   779.440] (II) fglrx(0): Manufacturer's mask: 0
[   779.440] (II) fglrx(0): Supported standard timings:
[   779.440] (II) fglrx(0): #0: hsize: 1440  vsize 900  refresh: 60  vid: 149
[   779.440] (II) fglrx(0): #1: hsize: 1440  vsize 900  refresh: 75  vid: 3989
[   779.440] (II) fglrx(0): #2: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
[   779.440] (II) fglrx(0): #3: hsize: 1280  vsize 960  refresh: 60  vid: 16513
[   779.440] (II) fglrx(0): #4: hsize: 1152  vsize 864  refresh: 75  vid: 20337
[   779.440] (II) fglrx(0): Supported detailed timing:
[   779.440] (II) fglrx(0): clock: 106.5 MHz   Image Size:  410 x 256 mm
[   779.440] (II) fglrx(0): h_active: 1440  h_sync: 1520  h_sync_end 1672 h_blank_end 1904 h_border: 0
[   779.440] (II) fglrx(0): v_active: 900  v_sync: 903  v_sync_end 909 v_blanking: 934 v_border: 0
[   779.440] (II) fglrx(0): Serial No: QN9071271907
[   779.440] (II) fglrx(0): Ranges: V min: 50 V max: 75 Hz, H min: 30 H max: 82 kHz, PixClock max 145 MHz
[   779.440] (II) fglrx(0): Monitor name: VA1930wm-3
[   779.440] (II) fglrx(0): EDID (in hex):
[   779.440] (II) fglrx(0): 	00ffffffffffff005a63200201010101
[   779.440] (II) fglrx(0): 	0c1101030e291a782ee5b5a355499927
[   779.440] (II) fglrx(0): 	135054bfef809500950f81808140714f
[   779.440] (II) fglrx(0): 	0101010101019a29a0d0518422305098
[   779.440] (II) fglrx(0): 	36009a001100001c000000ff00514e39
[   779.440] (II) fglrx(0): 	3037313237313930370a000000fd0032
[   779.440] (II) fglrx(0): 	4b1e520e000a202020202020000000fc
[   779.440] (II) fglrx(0): 	00564131393330776d2d330a20200028
[   779.440] (II) fglrx(0): End of Display0 EDID data --------------------
[   779.440] (WW) fglrx(0): Dynamic Surface Resizing cannot be enabled
[   779.441] (II) fglrx(0): EDID for output DFP1
[   779.441] (II) fglrx(0): EDID for output DFP2
[   779.441] (II) fglrx(0): EDID for output DFP3
[   779.441] (II) fglrx(0): EDID for output DFP4
[   779.441] (II) fglrx(0): EDID for output DFP5
[   779.441] (II) fglrx(0): EDID for output DFP6
[   779.441] (II) fglrx(0): EDID for output CRT1
[   779.441] (II) fglrx(0): Manufacturer: VSC  Model: 220  Serial#: 16843009
[   779.441] (II) fglrx(0): Year: 2007  Week: 12
[   779.441] (II) fglrx(0): EDID Version: 1.3
[   779.441] (II) fglrx(0): Analog Display Input,  Input Voltage Level: 0.700/0.300 V
[   779.441] (II) fglrx(0): Sync:  Separate  Composite  SyncOnGreen
[   779.441] (II) fglrx(0): Max Image Size [cm]: horiz.: 41  vert.: 26
[   779.441] (II) fglrx(0): Gamma: 2.20
[   779.441] (II) fglrx(0): DPMS capabilities: Off; RGB/Color Display
[   779.441] (II) fglrx(0): Default color space is primary color space
[   779.441] (II) fglrx(0): First detailed timing is preferred mode
[   779.441] (II) fglrx(0): redX: 0.640 redY: 0.334   greenX: 0.286 greenY: 0.599
[   779.441] (II) fglrx(0): blueX: 0.154 blueY: 0.077   whiteX: 0.313 whiteY: 0.329
[   779.441] (II) fglrx(0): Supported established timings:
[   779.441] (II) fglrx(0): 720x400@70Hz
[   779.441] (II) fglrx(0): 640x480@60Hz
[   779.441] (II) fglrx(0): 640x480@67Hz
[   779.441] (II) fglrx(0): 640x480@72Hz
[   779.441] (II) fglrx(0): 640x480@75Hz
[   779.441] (II) fglrx(0): 800x600@56Hz
[   779.441] (II) fglrx(0): 800x600@60Hz
[   779.441] (II) fglrx(0): 800x600@72Hz
[   779.441] (II) fglrx(0): 800x600@75Hz
[   779.441] (II) fglrx(0): 832x624@75Hz
[   779.441] (II) fglrx(0): 1024x768@60Hz
[   779.441] (II) fglrx(0): 1024x768@70Hz
[   779.441] (II) fglrx(0): 1024x768@75Hz
[   779.441] (II) fglrx(0): 1280x1024@75Hz
[   779.441] (II) fglrx(0): 1152x864@75Hz
[   779.441] (II) fglrx(0): Manufacturer's mask: 0
[   779.441] (II) fglrx(0): Supported standard timings:
[   779.441] (II) fglrx(0): #0: hsize: 1440  vsize 900  refresh: 60  vid: 149
[   779.441] (II) fglrx(0): #1: hsize: 1440  vsize 900  refresh: 75  vid: 3989
[   779.441] (II) fglrx(0): #2: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
[   779.441] (II) fglrx(0): #3: hsize: 1280  vsize 960  refresh: 60  vid: 16513
[   779.441] (II) fglrx(0): #4: hsize: 1152  vsize 864  refresh: 75  vid: 20337
[   779.441] (II) fglrx(0): Supported detailed timing:
[   779.441] (II) fglrx(0): clock: 106.5 MHz   Image Size:  410 x 256 mm
[   779.441] (II) fglrx(0): h_active: 1440  h_sync: 1520  h_sync_end 1672 h_blank_end 1904 h_border: 0
[   779.441] (II) fglrx(0): v_active: 900  v_sync: 903  v_sync_end 909 v_blanking: 934 v_border: 0
[   779.441] (II) fglrx(0): Serial No: QN9071271907
[   779.441] (II) fglrx(0): Ranges: V min: 50 V max: 75 Hz, H min: 30 H max: 82 kHz, PixClock max 145 MHz
[   779.441] (II) fglrx(0): Monitor name: VA1930wm-3
[   779.441] (II) fglrx(0): EDID (in hex):
[   779.441] (II) fglrx(0): 	00ffffffffffff005a63200201010101
[   779.441] (II) fglrx(0): 	0c1101030e291a782ee5b5a355499927
[   779.441] (II) fglrx(0): 	135054bfef809500950f81808140714f
[   779.441] (II) fglrx(0): 	0101010101019a29a0d0518422305098
[   779.441] (II) fglrx(0): 	36009a001100001c000000ff00514e39
[   779.441] (II) fglrx(0): 	3037313237313930370a000000fd0032
[   779.441] (II) fglrx(0): 	4b1e520e000a202020202020000000fc
[   779.441] (II) fglrx(0): 	00564131393330776d2d330a20200028
[   779.441] (II) fglrx(0): Printing probed modes for output CRT1
[   779.441] (II) fglrx(0): Modeline "1440x900"x60.0  106.50  1440 1520 1672 1904  900 903 909 934 -hsync +vsync (55.9 kHz eP)
[   779.441] (II) fglrx(0): Modeline "1280x1024"x75.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[   779.441] (II) fglrx(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[   779.441] (II) fglrx(0): Modeline "1440x900"x75.0  136.75  1440 1536 1688 1936  900 903 909 942 -hsync +vsync (70.6 kHz e)
[   779.441] (II) fglrx(0): Modeline "1280x960"x60.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz e)
[   779.441] (II) fglrx(0): Modeline "1280x800"x60.0  108.00  1280 1376 1488 1800  800 961 964 1000 +hsync +vsync (60.0 kHz e)
[   779.441] (II) fglrx(0): Modeline "1152x864"x75.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
[   779.441] (II) fglrx(0): Modeline "1152x864"x60.0  106.50  1152 1520 1672 1904  864 903 909 934 -hsync +vsync (55.9 kHz e)
[   779.441] (II) fglrx(0): Modeline "1280x768"x60.0  108.00  1280 1376 1488 1800  768 961 964 1000 +hsync +vsync (60.0 kHz e)
[   779.441] (II) fglrx(0): Modeline "1280x720"x60.0  108.00  1280 1376 1488 1800  720 961 964 1000 +hsync +vsync (60.0 kHz e)
[   779.441] (II) fglrx(0): Modeline "1024x768"x75.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[   779.441] (II) fglrx(0): Modeline "1024x768"x70.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[   779.441] (II) fglrx(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[   779.441] (II) fglrx(0): Modeline "800x600"x72.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz e)
[   779.441] (II) fglrx(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[   779.441] (II) fglrx(0): Modeline "800x600"x60.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[   779.441] (II) fglrx(0): Modeline "800x600"x56.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[   779.441] (II) fglrx(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[   779.441] (II) fglrx(0): Modeline "640x480"x72.0   31.50  640 656 696 832  480 481 484 520 -hsync -vsync (37.9 kHz e)
[   779.441] (II) fglrx(0): Modeline "640x480"x67.0   27.28  640 664 728 816  480 481 484 499 -hsync +vsync (33.4 kHz e)
[   779.441] (II) fglrx(0): Modeline "640x480"x60.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[   779.441] (II) fglrx(0): Output DFP1 disconnected
[   779.441] (II) fglrx(0): Output DFP2 disconnected
[   779.441] (II) fglrx(0): Output DFP3 disconnected
[   779.441] (II) fglrx(0): Output DFP4 disconnected
[   779.441] (II) fglrx(0): Output DFP5 disconnected
[   779.441] (II) fglrx(0): Output DFP6 disconnected
[   779.441] (II) fglrx(0): Output CRT1 connected
[   779.441] (II) fglrx(0): Using exact sizes for initial modes
[   779.441] (II) fglrx(0): Output CRT1 using initial mode 1440x900
[   779.441] (II) fglrx(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[   779.441] (II) fglrx(0): DPI set to (96, 96)
[   779.441] (II) fglrx(0): Eyefinity capable adapter detected.
[   779.441] (II) fglrx(0): Adapter AMD Radeon HD 7700 Series   has 6 configurable heads and 1 displays connected.
[   779.441] (==) fglrx(0):  PseudoColor visuals disabled
[   779.441] (II) Loading sub module "ramdac"
[   779.441] (II) LoadModule: "ramdac"
[   779.441] (II) Module "ramdac" already built-in
[   779.441] (==) fglrx(0): NoDRI = NO
[   779.441] (==) fglrx(0): Capabilities: 0x00000000
[   779.441] (==) fglrx(0): CapabilitiesEx: 0x00000000
[   779.441] (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
[   779.441] (==) fglrx(0): UseFastTLS=0
[   779.441] (II) fglrx(0): Shadow Primary option: ShadowPrimary is enabled
[   779.441] (--) Depth 24 pixmap format is 32 bpp
[   779.441] (EE) fglrx(0): atiddxDriScreenInit failed. Probably kernel module missing or incompatible. 
[   779.441] (WW) fglrx(0): ***********************************************************
[   779.441] (WW) fglrx(0): * DRI initialization failed                               *
[   779.441] (WW) fglrx(0): * kernel module (fglrx.ko) may be missing or incompatible *
[   779.441] (WW) fglrx(0): * 2D and 3D acceleration disabled                         *
[   779.441] (WW) fglrx(0): ***********************************************************
[   779.441] (II) fglrx(0): FBADPhys: 0xf400000000 FBMappedSize: 0x10000000
[   779.442] (II) fglrx(0): FBMM initialized for area (0,0)-(1472,8191)
[   779.442] (II) fglrx(0): FBMM auto alloc for area (0,0)-(1472,1440) (front color buffer - assumption)
[   779.442] (II) fglrx(0): Largest offscreen area available: 1472 x 6751
[   779.442] (==) fglrx(0): Backing store disabled
[   779.442] Loading extension FGLRXEXTENSION
[   779.442] (**) fglrx(0): DPMS enabled
[   779.442] (II) fglrx(0): Initialized in-driver Xinerama extension
[   779.442] (WW) fglrx(0): Textured Video not supported without DRI enabled.
[   779.442] (II) LoadModule: "glesx"
[   779.442] (II) Loading /usr/lib/xorg/modules/glesx.so
[   779.443] (II) Module glesx: vendor="X.Org Foundation"
[   779.443] 	compiled for 1.4.99.906, module version = 1.0.0
[   779.443] Loading extension GLESX
[   779.443] (II) fglrx(0): GLESX enableFlags = 576
[   779.443] (II) fglrx(0): Enable composite support successfully
[   779.443] (WW) fglrx(0): Option "VendorName" is not used
[   779.443] (WW) fglrx(0): Option "ModelName" is not used
[   779.443] (==) fglrx(0): Silken mouse enabled
[   779.443] (==) fglrx(0): Using HW cursor of display infrastructure!
[   779.443] (II) fglrx(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[   779.556] (--) RandR disabled
[   779.559] (II) AIGLX: Screen 0 is not DRI capable
[   779.560] [glesx] __glESXExtensionInit: No GL ES2.0 capable screen found!
[   779.560] (II) fglrx(0): Setting screen physical size to 381 x 238
[   779.668] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[   779.668] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[   779.668] (II) LoadModule: "evdev"
[   779.668] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[   779.669] (II) Module evdev: vendor="X.Org Foundation"
[   779.669] 	compiled for 1.13.0, module version = 2.7.3
[   779.669] 	Module class: X.Org XInput Driver
[   779.669] 	ABI class: X.Org XInput driver, version 18.0
[   779.669] (II) Using input driver 'evdev' for 'Power Button'
[   779.669] (**) Power Button: always reports core events
[   779.669] (**) evdev: Power Button: Device: "/dev/input/event4"
[   779.669] (--) evdev: Power Button: Vendor 0 Product 0x1
[   779.669] (--) evdev: Power Button: Found keys
[   779.669] (II) evdev: Power Button: Configuring as keyboard
[   779.669] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event4"
[   779.669] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[   779.669] (**) Option "xkb_rules" "evdev"
[   779.669] (**) Option "xkb_model" "evdev"
[   779.669] (**) Option "xkb_layout" "us"
[   779.694] (II) config/udev: Adding input device Sleep Button (/dev/input/event3)
[   779.694] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[   779.694] (II) Using input driver 'evdev' for 'Sleep Button'
[   779.694] (**) Sleep Button: always reports core events
[   779.694] (**) evdev: Sleep Button: Device: "/dev/input/event3"
[   779.694] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[   779.694] (--) evdev: Sleep Button: Found keys
[   779.694] (II) evdev: Sleep Button: Configuring as keyboard
[   779.694] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3/event3"
[   779.694] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 7)
[   779.694] (**) Option "xkb_rules" "evdev"
[   779.694] (**) Option "xkb_model" "evdev"
[   779.694] (**) Option "xkb_layout" "us"
[   779.695] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=11 (/dev/input/event14)
[   779.695] (II) No input driver specified, ignoring this device.
[   779.695] (II) This device may have been added with another device file.
[   779.695] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=10 (/dev/input/event15)
[   779.695] (II) No input driver specified, ignoring this device.
[   779.695] (II) This device may have been added with another device file.
[   779.696] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=9 (/dev/input/event16)
[   779.696] (II) No input driver specified, ignoring this device.
[   779.696] (II) This device may have been added with another device file.
[   779.696] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=8 (/dev/input/event17)
[   779.696] (II) No input driver specified, ignoring this device.
[   779.696] (II) This device may have been added with another device file.
[   779.696] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=7 (/dev/input/event18)
[   779.696] (II) No input driver specified, ignoring this device.
[   779.696] (II) This device may have been added with another device file.
[   779.697] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=3 (/dev/input/event19)
[   779.697] (II) No input driver specified, ignoring this device.
[   779.697] (II) This device may have been added with another device file.
[   779.697] (II) config/udev: Adding input device UVC Camera (046d:081d) (/dev/input/event6)
[   779.697] (**) UVC Camera (046d:081d): Applying InputClass "evdev keyboard catchall"
[   779.697] (II) Using input driver 'evdev' for 'UVC Camera (046d:081d)'
[   779.697] (**) UVC Camera (046d:081d): always reports core events
[   779.697] (**) evdev: UVC Camera (046d:081d): Device: "/dev/input/event6"
[   779.697] (--) evdev: UVC Camera (046d:081d): Vendor 0x46d Product 0x81d
[   779.697] (--) evdev: UVC Camera (046d:081d): Found keys
[   779.697] (II) evdev: UVC Camera (046d:081d): Configuring as keyboard
[   779.697] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.2/input/input6/event6"
[   779.697] (II) XINPUT: Adding extended input device "UVC Camera (046d:081d)" (type: KEYBOARD, id 8)
[   779.697] (**) Option "xkb_rules" "evdev"
[   779.698] (**) Option "xkb_model" "evdev"
[   779.698] (**) Option "xkb_layout" "us"
[   779.698] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:101b (/dev/input/event0)
[   779.698] (**) Logitech Unifying Device. Wireless PID:101b: Applying InputClass "evdev pointer catchall"
[   779.698] (II) Using input driver 'evdev' for 'Logitech Unifying Device. Wireless PID:101b'
[   779.698] (**) Logitech Unifying Device. Wireless PID:101b: always reports core events
[   779.698] (**) evdev: Logitech Unifying Device. Wireless PID:101b: Device: "/dev/input/event0"
[   779.698] (--) evdev: Logitech Unifying Device. Wireless PID:101b: Vendor 0x46d Product 0xc52b
[   779.698] (--) evdev: Logitech Unifying Device. Wireless PID:101b: Found 20 mouse buttons
[   779.698] (--) evdev: Logitech Unifying Device. Wireless PID:101b: Found scroll wheel(s)
[   779.698] (--) evdev: Logitech Unifying Device. Wireless PID:101b: Found relative axes
[   779.699] (--) evdev: Logitech Unifying Device. Wireless PID:101b: Found x and y relative axes
[   779.699] (II) evdev: Logitech Unifying Device. Wireless PID:101b: Configuring as mouse
[   779.699] (II) evdev: Logitech Unifying Device. Wireless PID:101b: Adding scrollwheel support
[   779.699] (**) evdev: Logitech Unifying Device. Wireless PID:101b: YAxisMapping: buttons 4 and 5
[   779.699] (**) evdev: Logitech Unifying Device. Wireless PID:101b: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[   779.699] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.2/0003:046D:C52B.0003/input/input0/event0"
[   779.699] (II) XINPUT: Adding extended input device "Logitech Unifying Device. Wireless PID:101b" (type: MOUSE, id 9)
[   779.699] (II) evdev: Logitech Unifying Device. Wireless PID:101b: initialized for relative axes.
[   779.699] (**) Logitech Unifying Device. Wireless PID:101b: (accel) keeping acceleration scheme 1
[   779.699] (**) Logitech Unifying Device. Wireless PID:101b: (accel) acceleration profile 0
[   779.699] (**) Logitech Unifying Device. Wireless PID:101b: (accel) acceleration factor: 2.000
[   779.699] (**) Logitech Unifying Device. Wireless PID:101b: (accel) acceleration threshold: 4
[   779.700] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:101b (/dev/input/mouse0)
[   779.700] (II) No input driver specified, ignoring this device.
[   779.700] (II) This device may have been added with another device file.
[   779.700] (II) config/udev: Adding input device BTC USB Multimedia Keyboard (/dev/input/event1)
[   779.700] (**) BTC USB Multimedia Keyboard: Applying InputClass "evdev keyboard catchall"
[   779.700] (II) Using input driver 'evdev' for 'BTC USB Multimedia Keyboard'
[   779.700] (**) BTC USB Multimedia Keyboard: always reports core events
[   779.700] (**) evdev: BTC USB Multimedia Keyboard: Device: "/dev/input/event1"
[   779.700] (--) evdev: BTC USB Multimedia Keyboard: Vendor 0x46d Product 0xc313
[   779.700] (--) evdev: BTC USB Multimedia Keyboard: Found keys
[   779.700] (II) evdev: BTC USB Multimedia Keyboard: Configuring as keyboard
[   779.700] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.0/input/input1/event1"
[   779.700] (II) XINPUT: Adding extended input device "BTC USB Multimedia Keyboard" (type: KEYBOARD, id 10)
[   779.700] (**) Option "xkb_rules" "evdev"
[   779.700] (**) Option "xkb_model" "evdev"
[   779.700] (**) Option "xkb_layout" "us"
[   779.701] (II) config/udev: Adding input device BTC USB Multimedia Keyboard (/dev/input/event2)
[   779.701] (**) BTC USB Multimedia Keyboard: Applying InputClass "evdev keyboard catchall"
[   779.701] (II) Using input driver 'evdev' for 'BTC USB Multimedia Keyboard'
[   779.701] (**) BTC USB Multimedia Keyboard: always reports core events
[   779.701] (**) evdev: BTC USB Multimedia Keyboard: Device: "/dev/input/event2"
[   779.701] (--) evdev: BTC USB Multimedia Keyboard: Vendor 0x46d Product 0xc313
[   779.701] (--) evdev: BTC USB Multimedia Keyboard: Found keys
[   779.701] (II) evdev: BTC USB Multimedia Keyboard: Configuring as keyboard
[   779.701] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.1/input/input2/event2"
[   779.701] (II) XINPUT: Adding extended input device "BTC USB Multimedia Keyboard" (type: KEYBOARD, id 11)
[   779.701] (**) Option "xkb_rules" "evdev"
[   779.701] (**) Option "xkb_model" "evdev"
[   779.701] (**) Option "xkb_layout" "us"
[   779.702] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event7)
[   779.702] (II) No input driver specified, ignoring this device.
[   779.702] (II) This device may have been added with another device file.
[   779.703] (II) config/udev: Adding input device HDA Intel MID Line Out Surround (/dev/input/event10)
[   779.703] (II) No input driver specified, ignoring this device.
[   779.703] (II) This device may have been added with another device file.
[   779.703] (II) config/udev: Adding input device HDA Intel MID Line Out Front (/dev/input/event11)
[   779.703] (II) No input driver specified, ignoring this device.
[   779.703] (II) This device may have been added with another device file.
[   779.703] (II) config/udev: Adding input device HDA Intel MID Line (/dev/input/event12)
[   779.703] (II) No input driver specified, ignoring this device.
[   779.703] (II) This device may have been added with another device file.
[   779.703] (II) config/udev: Adding input device HDA Intel MID Rear Mic (/dev/input/event13)
[   779.703] (II) No input driver specified, ignoring this device.
[   779.703] (II) This device may have been added with another device file.
[   779.703] (II) config/udev: Adding input device HDA Intel MID Line Out Side (/dev/input/event8)
[   779.703] (II) No input driver specified, ignoring this device.
[   779.703] (II) This device may have been added with another device file.
[   779.704] (II) config/udev: Adding input device HDA Intel MID Line Out CLFE (/dev/input/event9)
[   779.704] (II) No input driver specified, ignoring this device.
[   779.704] (II) This device may have been added with another device file.
[   779.704] (II) config/udev: Adding input device PC Speaker (/dev/input/event5)
[   779.704] (II) No input driver specified, ignoring this device.
[   779.704] (II) This device may have been added with another device file.
[   779.706] (II) fglrx(0): Restoring Recent Mode via PCS is not supported in RANDR 1.2 capable environments
[   808.793] (EE) fglrx(0): firegl_SetSuspendResumeState FAILED -9.

Please Help,
I am very new to Arch

Last edited by jasonwryan (2013-12-20 18:46:10)

Offline

#2 2013-12-20 03:18:09

karol
Archivist
Registered: 2009-05-06
Posts: 25,440

Re: Xorg Fails to Start (Catalyst 13.11 Beta)

Why are you using an old kernel? Is your system up to date?

Offline

#3 2013-12-20 03:22:28

develop7
Member
Registered: 2013-12-20
Posts: 12

Re: Xorg Fails to Start (Catalyst 13.11 Beta)

I can update by running pacman -Syyu right?

Offline

#4 2013-12-20 03:26:08

karol
Archivist
Registered: 2009-05-06
Posts: 25,440

Re: Xorg Fails to Start (Catalyst 13.11 Beta)

Even 'pacman -Syu' is enough.

Offline

#5 2013-12-20 03:26:14

develop7
Member
Registered: 2013-12-20
Posts: 12

Re: Xorg Fails to Start (Catalyst 13.11 Beta)

Okay, I am running a full system update, as that is 900 MB and my internet connection is very slow, I will have more updates tomorrow.

Offline

#6 2013-12-20 14:59:21

develop7
Member
Registered: 2013-12-20
Posts: 12

Re: Xorg Fails to Start (Catalyst 13.11 Beta)

Okay,
I ran a full system update. Still, the same thing is happening but now my internet connection doesn't work.

Offline

#7 2013-12-21 02:27:19

develop7
Member
Registered: 2013-12-20
Posts: 12

Re: Xorg Fails to Start (Catalyst 13.11 Beta)

Hello?

Offline

#8 2013-12-21 15:14:34

clfarron4
Member
From: London, UK
Registered: 2013-06-28
Posts: 2,163
Website

Re: Xorg Fails to Start (Catalyst 13.11 Beta)

develop7 wrote:

Hello?

Please don't bump your posts. It's technically against Forum Etiquette.

develop7 wrote:

When I start X it gives me the "oh no something has gone wrong..." screen

Are you using GNOME (or trying to)? My experience is that GNOME Shell does not play nicely with AMD cards full stop (setting Tear-Free to ON in amdcccle helps, but it's not great).

develop7 wrote:

I have just installed the new catalyst 13.11 beta drivers.

From where did you install them and which packages did you install? There are at least three different ways to install them on Arch, and knowing which one you did means we can work out how to deal with this.

Last edited by clfarron4 (2013-12-21 15:16:45)

Claire is fine.
Problems? I have dysgraphia, so clear and concise please.
My public GPG key for package signing
My x86_64 package repository

Offline

#9 2013-12-21 17:06:27

Robsteady
Member
From: N. Jersey, USA
Registered: 2013-12-20
Posts: 6
Website

Re: Xorg Fails to Start (Catalyst 13.11 Beta)

I had made the mistake of downloading and installing the driver directly from AMD and ended up with what is probably the same issue you're having.

As a start I would direct you to this page of the wiki and suggest you follow this route. It's actually a pretty straight-forward set up and works well. One thing I don't recall seeing on the page that I ran into as a problem is you need to make sure the headers file for your kernel is installed. I'm new to Arch as well and I've found as long as you follow the wiki and take the time to read it first, things work splendidly.

You will most likely need to remove the AMD driver and follow the process described there.

Offline

#10 2013-12-21 23:20:39

develop7
Member
Registered: 2013-12-20
Posts: 12

Re: Xorg Fails to Start (Catalyst 13.11 Beta)

Hi,
Sorry for bumping my post. I have installed the amd drivers using yaourt. I have tried another time using Vi0l0s repo but that did not work as X would hang. I am using GNOME.

Offline

#11 2013-12-22 22:05:46

clfarron4
Member
From: London, UK
Registered: 2013-06-28
Posts: 2,163
Website

Re: Xorg Fails to Start (Catalyst 13.11 Beta)

develop7 wrote:

I have installed the amd drivers using yaourt. I have tried another time using Vi0l0s repo but that did not work as X would hang.

Which one of the packages did you install with yaourt?

develop7 wrote:

I am using GNOME.

Last time I tried GNOME with an AMD card, it failed miserably, with both the radeon driver and AMD Catalyst.

Claire is fine.
Problems? I have dysgraphia, so clear and concise please.
My public GPG key for package signing
My x86_64 package repository

Offline

#12 2013-12-23 01:50:27

okubax
Member
From: Kent, UK.
Registered: 2010-04-24
Posts: 210
Website

Re: Xorg Fails to Start (Catalyst 13.11 Beta)

If I may ask what is your card make? and try catalyst-test from the AUR as this can help. I have tried my card AMD HD 6620G with the catalyst-test driver on both gnome and kde and it works on both.

Offline

#13 2013-12-25 21:07:41

develop7
Member
Registered: 2013-12-20
Posts: 12

Re: Xorg Fails to Start (Catalyst 13.11 Beta)

I installed catalyst-test.

Offline

#14 2013-12-26 00:44:25

develop7
Member
Registered: 2013-12-20
Posts: 12

Re: Xorg Fails to Start (Catalyst 13.11 Beta)

My card is an sapphire radeon hd 7770.

Offline

#15 2013-12-26 01:47:19

Steef435
Member
Registered: 2013-08-29
Posts: 577
Website

Re: Xorg Fails to Start (Catalyst 13.11 Beta)

Note that you can edit a post.

Did you reinstall catalyst after the system update? If you got a kernel update it has to be rebuilt. Perhaps you should make a new topic about your internet connection if you haven't solved it yet.

Offline

#16 2014-01-01 05:21:46

develop7
Member
Registered: 2013-12-20
Posts: 12

Re: Xorg Fails to Start (Catalyst 13.11 Beta)

Ok, sorry I am a real n00b but I think I need to rebuild everything. How do I do this?

Last edited by develop7 (2014-01-01 05:22:18)

Offline

#17 2014-01-01 12:38:27

clfarron4
Member
From: London, UK
Registered: 2013-06-28
Posts: 2,163
Website

Re: Xorg Fails to Start (Catalyst 13.11 Beta)

Assuming you are not using the catalyst package from the AUR, but one of it's companions like catalyst-hook or catalyst-total and you are only using one card and one screen, run

sudo aticonfig --initial
sudo catalyst_build_module all

Also, trying enabling the Tear-Free option for GNOME.

Claire is fine.
Problems? I have dysgraphia, so clear and concise please.
My public GPG key for package signing
My x86_64 package repository

Offline

#18 2014-01-07 01:09:23

develop7
Member
Registered: 2013-12-20
Posts: 12

Re: Xorg Fails to Start (Catalyst 13.11 Beta)

So I ran those commands and enabled the tear-free desktop but the same thing happened.

Offline

#19 2014-01-07 09:43:31

Kartious
Member
From: UK
Registered: 2013-03-23
Posts: 311

Re: Xorg Fails to Start (Catalyst 13.11 Beta)

Steef435 wrote:

If you got a kernel update it has to be rebuilt.

Pacman always automatically rebuilds the kernel after it is updated, all that is required is a reboot.
---------------------------------------------------------------------

develop7 wrote:

but now my internet connection doesn't work.

May I point you and quote you to this in a sticky which you should of read before posting:

iphitus wrote:

Don't do this

It doesnt work!!!

That is not output, that says absolutely nothing. It's probably the most useless thing you could post.

---------------------------------------------------------------------

develop7 wrote:

Ok, sorry I am a real n00b but I think I need to rebuild everything. How do I do this?

Arch is a system designed for the more competent user, if you are going to constantly ask for help every step of the way you may need to rethink which operating system you may be using.

Last edited by Kartious (2014-01-07 09:48:49)

How to post. How not to post
Forum Etiquette

Offline

#20 2014-01-07 11:56:28

clfarron4
Member
From: London, UK
Registered: 2013-06-28
Posts: 2,163
Website

Re: Xorg Fails to Start (Catalyst 13.11 Beta)

Kartious wrote:
Steef435 wrote:

If you got a kernel update it has to be rebuilt.

Pacman always automatically rebuilds the kernel after it is updated, all that is required is a reboot.

This doesn't mean all the kernel modules are built though. I have to check my updates and do the headers before I do the kernel, otherwise pacman will fail to build the fglrx module (because standard updates install the kernel then the headers, not the fight order for the fglrx kernel modules).

Claire is fine.
Problems? I have dysgraphia, so clear and concise please.
My public GPG key for package signing
My x86_64 package repository

Offline

#21 2014-01-08 12:50:53

Kartious
Member
From: UK
Registered: 2013-03-23
Posts: 311

Re: Xorg Fails to Start (Catalyst 13.11 Beta)

clfarron4 wrote:

This doesn't mean all the kernel modules are built though. I have to check my updates and do the headers before I do the kernel, otherwise pacman will fail to build the fglrx module (because standard updates install the kernel then the headers, not the fight order for the fglrx kernel modules).

I was not aware of this, the more you know eh ?

How to post. How not to post
Forum Etiquette

Offline

#22 2014-01-08 15:37:03

clfarron4
Member
From: London, UK
Registered: 2013-06-28
Posts: 2,163
Website

Re: Xorg Fails to Start (Catalyst 13.11 Beta)

Kartious wrote:
clfarron4 wrote:

This doesn't mean all the kernel modules are built though. I have to check my updates and do the headers before I do the kernel, otherwise pacman will fail to build the fglrx module (because standard updates install the kernel then the headers, not the fight order for the fglrx kernel modules).

I was not aware of this, the more you know eh ?

Found that out by installing Catalyst-hook, but not enabling the service.

Claire is fine.
Problems? I have dysgraphia, so clear and concise please.
My public GPG key for package signing
My x86_64 package repository

Offline

#23 2014-01-08 19:09:20

develop7
Member
Registered: 2013-12-20
Posts: 12

Re: Xorg Fails to Start (Catalyst 13.11 Beta)

I will try running another system update and installing catalyst-hook. That might help.

Offline

Pages: 1

Board footer

Powered by FluxBB