You are not logged in.
Pages: 1
Under multiple conditions, I find myself at a red screen. I think it is associated with my graphics drivers.
Shortly after switching to a different CLI tty while XFCE4 is running, I wind up at a complete, solid red screen ("red screen of death"). Sometimes, just typing "exit" as the username in SLiM, I am presented with the red screen.
I have found that typing "startxfce4" and pressing enter will make the red screen go away and XFCE come up.
I have done some research on this issue on the internet, but can't find too much information. Here are some logs and config files that may or may not be relevant.
/var/log/Xorg.0.log
[ 850.166]
X.Org X Server 1.14.5
Release Date: 2013-12-12
[ 850.166] X Protocol Version 11, Revision 0
[ 850.166] Build Operating System: Linux 3.12.5-1-ARCH x86_64
[ 850.166] Current Operating System: Linux middle 3.12.6-1-ARCH #1 SMP PREEMPT Fri Dec 20 19:39:00 CET 2013 x86_64
[ 850.166] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=0978a4b7-ebe7-4d39-8337-8749156e67c4 rw quiet
[ 850.166] Build Date: 13 December 2013 03:11:42PM
[ 850.166]
[ 850.166] Current version of pixman: 0.32.4
[ 850.166] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 850.166] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 850.166] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Jan 5 21:10:31 2014
[ 850.166] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 850.166] (==) No Layout section. Using the first Screen section.
[ 850.166] (==) No screen section available. Using defaults.
[ 850.166] (**) |-->Screen "Default Screen Section" (0)
[ 850.166] (**) | |-->Monitor "<default monitor>"
[ 850.166] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 850.166] (==) Automatically adding devices
[ 850.166] (==) Automatically enabling devices
[ 850.166] (==) Automatically adding GPU devices
[ 850.166] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 850.166] Entry deleted from font path.
[ 850.166] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 850.166] Entry deleted from font path.
[ 850.166] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 850.166] Entry deleted from font path.
[ 850.166] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 850.166] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 850.166] Entry deleted from font path.
[ 850.166] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 850.166] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/
[ 850.166] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 850.166] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 850.166] (II) Loader magic: 0x7fec20
[ 850.166] (II) Module ABI versions:
[ 850.166] X.Org ANSI C Emulation: 0.4
[ 850.166] X.Org Video Driver: 14.1
[ 850.166] X.Org XInput driver : 19.1
[ 850.166] X.Org Server Extension : 7.0
[ 850.167] (--) PCI: (0:0:2:0) 8086:0112:1458:d000 rev 9, Mem @ 0xfb400000/4194304, 0xd0000000/268435456, I/O @ 0x0000ff00/64
[ 850.167] (--) PCI:*(0:1:0:0) 10de:1189:1043:841b rev 161, Mem @ 0xf9000000/16777216, 0xe0000000/134217728, 0xee000000/33554432, I/O @ 0x0000bf00/128, BIOS @ 0x????????/524288
[ 850.167] Initializing built-in extension Generic Event Extension
[ 850.167] Initializing built-in extension SHAPE
[ 850.167] Initializing built-in extension MIT-SHM
[ 850.167] Initializing built-in extension XInputExtension
[ 850.167] Initializing built-in extension XTEST
[ 850.167] Initializing built-in extension BIG-REQUESTS
[ 850.167] Initializing built-in extension SYNC
[ 850.167] Initializing built-in extension XKEYBOARD
[ 850.167] Initializing built-in extension XC-MISC
[ 850.167] Initializing built-in extension SECURITY
[ 850.167] Initializing built-in extension XINERAMA
[ 850.167] Initializing built-in extension XFIXES
[ 850.167] Initializing built-in extension RENDER
[ 850.167] Initializing built-in extension RANDR
[ 850.167] Initializing built-in extension COMPOSITE
[ 850.167] Initializing built-in extension DAMAGE
[ 850.167] Initializing built-in extension MIT-SCREEN-SAVER
[ 850.167] Initializing built-in extension DOUBLE-BUFFER
[ 850.167] Initializing built-in extension RECORD
[ 850.167] Initializing built-in extension DPMS
[ 850.167] Initializing built-in extension X-Resource
[ 850.167] Initializing built-in extension XVideo
[ 850.167] Initializing built-in extension XVideo-MotionCompensation
[ 850.167] Initializing built-in extension XFree86-VidModeExtension
[ 850.167] Initializing built-in extension XFree86-DGA
[ 850.167] Initializing built-in extension XFree86-DRI
[ 850.167] Initializing built-in extension DRI2
[ 850.167] (II) LoadModule: "glx"
[ 850.167] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 850.173] (II) Module glx: vendor="NVIDIA Corporation"
[ 850.173] compiled for 4.0.2, module version = 1.0.0
[ 850.173] Module class: X.Org Server Extension
[ 850.173] (II) NVIDIA GLX Module 304.117 Tue Nov 26 21:45:09 PST 2013
[ 850.173] Loading extension GLX
[ 850.173] (==) Matched nouveau as autoconfigured driver 0
[ 850.173] (==) Matched nvidia as autoconfigured driver 1
[ 850.173] (==) Matched nv as autoconfigured driver 2
[ 850.173] (==) Matched vesa as autoconfigured driver 3
[ 850.173] (==) Matched modesetting as autoconfigured driver 4
[ 850.173] (==) Matched fbdev as autoconfigured driver 5
[ 850.173] (==) Assigned the driver to the xf86ConfigLayout
[ 850.173] (II) LoadModule: "nouveau"
[ 850.173] (WW) Warning, couldn't open module nouveau
[ 850.173] (II) UnloadModule: "nouveau"
[ 850.173] (II) Unloading nouveau
[ 850.173] (EE) Failed to load module "nouveau" (module does not exist, 0)
[ 850.173] (II) LoadModule: "nvidia"
[ 850.173] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 850.173] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 850.173] compiled for 4.0.2, module version = 1.0.0
[ 850.173] Module class: X.Org Video Driver
[ 850.173] (II) LoadModule: "nv"
[ 850.173] (WW) Warning, couldn't open module nv
[ 850.173] (II) UnloadModule: "nv"
[ 850.173] (II) Unloading nv
[ 850.173] (EE) Failed to load module "nv" (module does not exist, 0)
[ 850.173] (II) LoadModule: "vesa"
[ 850.174] (WW) Warning, couldn't open module vesa
[ 850.174] (II) UnloadModule: "vesa"
[ 850.174] (II) Unloading vesa
[ 850.174] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 850.174] (II) LoadModule: "modesetting"
[ 850.174] (WW) Warning, couldn't open module modesetting
[ 850.174] (II) UnloadModule: "modesetting"
[ 850.174] (II) Unloading modesetting
[ 850.174] (EE) Failed to load module "modesetting" (module does not exist, 0)
[ 850.174] (II) LoadModule: "fbdev"
[ 850.174] (WW) Warning, couldn't open module fbdev
[ 850.174] (II) UnloadModule: "fbdev"
[ 850.174] (II) Unloading fbdev
[ 850.174] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 850.174] (II) NVIDIA dlloader X Driver 304.117 Tue Nov 26 21:27:08 PST 2013
[ 850.174] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 850.174] (++) using VT number 7
[ 850.256] (II) Loading sub module "fb"
[ 850.257] (II) LoadModule: "fb"
[ 850.257] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 850.257] (II) Module fb: vendor="X.Org Foundation"
[ 850.257] compiled for 1.14.5, module version = 1.0.0
[ 850.257] ABI class: X.Org ANSI C Emulation, version 0.4
[ 850.257] (II) Loading sub module "wfb"
[ 850.257] (II) LoadModule: "wfb"
[ 850.257] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 850.257] (II) Module wfb: vendor="X.Org Foundation"
[ 850.257] compiled for 1.14.5, module version = 1.0.0
[ 850.257] ABI class: X.Org ANSI C Emulation, version 0.4
[ 850.257] (II) Loading sub module "ramdac"
[ 850.257] (II) LoadModule: "ramdac"
[ 850.257] (II) Module "ramdac" already built-in
[ 850.257] (II) NVIDIA(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 850.257] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[ 850.257] (==) NVIDIA(0): RGB weight 888
[ 850.257] (==) NVIDIA(0): Default visual is TrueColor
[ 850.257] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 850.257] (**) NVIDIA(0): Enabling 2D acceleration
[ 850.575] (II) NVIDIA(GPU-0): Display (DELL U2412M (DFP-0)) does not support NVIDIA 3D
[ 850.575] (II) NVIDIA(GPU-0): Vision stereo.
[ 850.576] (II) NVIDIA(0): NVIDIA GPU GeForce GTX 670 (GK104) at PCI:1:0:0 (GPU-0)
[ 850.576] (--) NVIDIA(0): Memory: 2097152 kBytes
[ 850.576] (--) NVIDIA(0): VideoBIOS: 80.04.5b.00.09
[ 850.576] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 850.576] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
[ 850.579] (--) NVIDIA(0): Valid display device(s) on GeForce GTX 670 at PCI:1:0:0
[ 850.579] (--) NVIDIA(0): CRT-0
[ 850.579] (--) NVIDIA(0): DELL U2412M (DFP-0) (connected)
[ 850.579] (--) NVIDIA(0): DFP-1
[ 850.579] (--) NVIDIA(0): DFP-2
[ 850.579] (--) NVIDIA(0): DFP-3
[ 850.579] (--) NVIDIA(0): DFP-4
[ 850.579] (--) NVIDIA(0): CRT-0: 400.0 MHz maximum pixel clock
[ 850.579] (--) NVIDIA(0): DELL U2412M (DFP-0): 330.0 MHz maximum pixel clock
[ 850.579] (--) NVIDIA(0): DELL U2412M (DFP-0): Internal Dual Link TMDS
[ 850.579] (--) NVIDIA(0): DFP-1: 165.0 MHz maximum pixel clock
[ 850.579] (--) NVIDIA(0): DFP-1: Internal Single Link TMDS
[ 850.579] (--) NVIDIA(0): DFP-2: 165.0 MHz maximum pixel clock
[ 850.579] (--) NVIDIA(0): DFP-2: Internal Single Link TMDS
[ 850.579] (--) NVIDIA(0): DFP-3: 330.0 MHz maximum pixel clock
[ 850.579] (--) NVIDIA(0): DFP-3: Internal Single Link TMDS
[ 850.579] (--) NVIDIA(0): DFP-4: 960.0 MHz maximum pixel clock
[ 850.579] (--) NVIDIA(0): DFP-4: Internal DisplayPort
[ 850.579] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 850.579] (**) NVIDIA(0): device DELL U2412M (DFP-0) (Using EDID frequencies has
[ 850.579] (**) NVIDIA(0): been enabled on all display devices.)
[ 850.580] (==) NVIDIA(0):
[ 850.580] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[ 850.580] (==) NVIDIA(0): will be used as the requested mode.
[ 850.580] (==) NVIDIA(0):
[ 850.580] (II) NVIDIA(0): Validated MetaModes:
[ 850.580] (II) NVIDIA(0): "DFP-0:nvidia-auto-select"
[ 850.580] (II) NVIDIA(0): Virtual screen size determined to be 1920 x 1200
[ 850.601] (--) NVIDIA(0): DPI set to (93, 95); computed from "UseEdidDpi" X config
[ 850.601] (--) NVIDIA(0): option
[ 850.601] (--) Depth 24 pixmap format is 32 bpp
[ 850.601] (II) NVIDIA: Using 3072.00 MB of virtual memory for indirect memory
[ 850.601] (II) NVIDIA: access.
[ 850.606] (II) NVIDIA(0): Setting mode "DFP-0:nvidia-auto-select"
[ 850.639] Loading extension NV-GLX
[ 850.647] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 850.647] (==) NVIDIA(0): Backing store disabled
[ 850.647] (==) NVIDIA(0): Silken mouse enabled
[ 850.647] (==) NVIDIA(0): DPMS enabled
[ 850.647] Loading extension NV-CONTROL
[ 850.648] Loading extension XINERAMA
[ 850.648] (II) Loading sub module "dri2"
[ 850.648] (II) LoadModule: "dri2"
[ 850.648] (II) Module "dri2" already built-in
[ 850.648] (II) NVIDIA(0): [DRI2] Setup complete
[ 850.648] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 850.648] (--) RandR disabled
[ 850.651] (II) Initializing extension GLX
[ 850.668] (II) config/udev: Adding input device Power Button (/dev/input/event7)
[ 850.668] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 850.668] (II) LoadModule: "evdev"
[ 850.668] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 850.668] (II) Module evdev: vendor="X.Org Foundation"
[ 850.668] compiled for 1.14.3, module version = 2.8.2
[ 850.668] Module class: X.Org XInput Driver
[ 850.668] ABI class: X.Org XInput driver, version 19.1
[ 850.668] (II) Using input driver 'evdev' for 'Power Button'
[ 850.668] (**) Power Button: always reports core events
[ 850.668] (**) evdev: Power Button: Device: "/dev/input/event7"
[ 850.668] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 850.668] (--) evdev: Power Button: Found keys
[ 850.668] (II) evdev: Power Button: Configuring as keyboard
[ 850.668] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input8/event7"
[ 850.668] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 850.668] (**) Option "xkb_rules" "evdev"
[ 850.668] (**) Option "xkb_model" "pc104"
[ 850.668] (**) Option "xkb_layout" "us"
[ 850.679] (II) config/udev: Adding input device Power Button (/dev/input/event6)
[ 850.679] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 850.679] (II) Using input driver 'evdev' for 'Power Button'
[ 850.679] (**) Power Button: always reports core events
[ 850.679] (**) evdev: Power Button: Device: "/dev/input/event6"
[ 850.679] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 850.679] (--) evdev: Power Button: Found keys
[ 850.679] (II) evdev: Power Button: Configuring as keyboard
[ 850.679] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input7/event6"
[ 850.679] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 850.679] (**) Option "xkb_rules" "evdev"
[ 850.679] (**) Option "xkb_model" "pc104"
[ 850.679] (**) Option "xkb_layout" "us"
[ 850.679] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event22)
[ 850.679] (II) No input driver specified, ignoring this device.
[ 850.679] (II) This device may have been added with another device file.
[ 850.679] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event21)
[ 850.679] (II) No input driver specified, ignoring this device.
[ 850.679] (II) This device may have been added with another device file.
[ 850.679] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event20)
[ 850.679] (II) No input driver specified, ignoring this device.
[ 850.679] (II) This device may have been added with another device file.
[ 850.679] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event19)
[ 850.679] (II) No input driver specified, ignoring this device.
[ 850.679] (II) This device may have been added with another device file.
[ 850.680] (II) config/udev: Adding input device G15 Gaming Keyboard (/dev/input/event3)
[ 850.680] (**) G15 Gaming Keyboard: Applying InputClass "evdev keyboard catchall"
[ 850.680] (II) Using input driver 'evdev' for 'G15 Gaming Keyboard'
[ 850.680] (**) G15 Gaming Keyboard: always reports core events
[ 850.680] (**) evdev: G15 Gaming Keyboard: Device: "/dev/input/event3"
[ 850.680] (--) evdev: G15 Gaming Keyboard: Vendor 0x46d Product 0xc226
[ 850.680] (--) evdev: G15 Gaming Keyboard: Found keys
[ 850.680] (II) evdev: G15 Gaming Keyboard: Configuring as keyboard
[ 850.680] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3.1/1-1.3.1:1.0/input/input4/event3"
[ 850.680] (II) XINPUT: Adding extended input device "G15 Gaming Keyboard" (type: KEYBOARD, id 8)
[ 850.680] (**) Option "xkb_rules" "evdev"
[ 850.680] (**) Option "xkb_model" "pc104"
[ 850.680] (**) Option "xkb_layout" "us"
[ 850.680] (II) config/udev: Adding input device G15 Gaming Keyboard (/dev/input/event4)
[ 850.680] (**) G15 Gaming Keyboard: Applying InputClass "evdev keyboard catchall"
[ 850.680] (II) Using input driver 'evdev' for 'G15 Gaming Keyboard'
[ 850.680] (**) G15 Gaming Keyboard: always reports core events
[ 850.680] (**) evdev: G15 Gaming Keyboard: Device: "/dev/input/event4"
[ 850.680] (--) evdev: G15 Gaming Keyboard: Vendor 0x46d Product 0xc226
[ 850.680] (--) evdev: G15 Gaming Keyboard: Found keys
[ 850.680] (II) evdev: G15 Gaming Keyboard: Configuring as keyboard
[ 850.680] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3.1/1-1.3.1:1.1/input/input5/event4"
[ 850.680] (II) XINPUT: Adding extended input device "G15 Gaming Keyboard" (type: KEYBOARD, id 9)
[ 850.680] (**) Option "xkb_rules" "evdev"
[ 850.680] (**) Option "xkb_model" "pc104"
[ 850.680] (**) Option "xkb_layout" "us"
[ 850.680] (II) config/udev: Adding input device G15 GamePanel LCD (/dev/input/event5)
[ 850.680] (**) G15 GamePanel LCD: Applying InputClass "evdev keyboard catchall"
[ 850.680] (II) Using input driver 'evdev' for 'G15 GamePanel LCD'
[ 850.680] (**) G15 GamePanel LCD: always reports core events
[ 850.680] (**) evdev: G15 GamePanel LCD: Device: "/dev/input/event5"
[ 850.680] (--) evdev: G15 GamePanel LCD: Vendor 0x46d Product 0xc227
[ 850.680] (--) evdev: G15 GamePanel LCD: Found keys
[ 850.680] (II) evdev: G15 GamePanel LCD: Configuring as keyboard
[ 850.680] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3.4/1-1.3.4:1.0/input/input6/event5"
[ 850.680] (II) XINPUT: Adding extended input device "G15 GamePanel LCD" (type: KEYBOARD, id 10)
[ 850.680] (**) Option "xkb_rules" "evdev"
[ 850.680] (**) Option "xkb_model" "pc104"
[ 850.680] (**) Option "xkb_layout" "us"
[ 850.680] (II) config/udev: Adding input device Razer Razer DeathAdder 2013 (/dev/input/event0)
[ 850.680] (**) Razer Razer DeathAdder 2013: Applying InputClass "evdev pointer catchall"
[ 850.680] (II) Using input driver 'evdev' for 'Razer Razer DeathAdder 2013'
[ 850.680] (**) Razer Razer DeathAdder 2013: always reports core events
[ 850.680] (**) evdev: Razer Razer DeathAdder 2013: Device: "/dev/input/event0"
[ 850.680] (--) evdev: Razer Razer DeathAdder 2013: Vendor 0x1532 Product 0x37
[ 850.680] (--) evdev: Razer Razer DeathAdder 2013: Found 9 mouse buttons
[ 850.680] (--) evdev: Razer Razer DeathAdder 2013: Found scroll wheel(s)
[ 850.680] (--) evdev: Razer Razer DeathAdder 2013: Found relative axes
[ 850.681] (--) evdev: Razer Razer DeathAdder 2013: Found x and y relative axes
[ 850.681] (II) evdev: Razer Razer DeathAdder 2013: Configuring as mouse
[ 850.681] (II) evdev: Razer Razer DeathAdder 2013: Adding scrollwheel support
[ 850.681] (**) evdev: Razer Razer DeathAdder 2013: YAxisMapping: buttons 4 and 5
[ 850.681] (**) evdev: Razer Razer DeathAdder 2013: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 850.681] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input1/event0"
[ 850.681] (II) XINPUT: Adding extended input device "Razer Razer DeathAdder 2013" (type: MOUSE, id 11)
[ 850.681] (II) evdev: Razer Razer DeathAdder 2013: initialized for relative axes.
[ 850.681] (**) Razer Razer DeathAdder 2013: (accel) keeping acceleration scheme 1
[ 850.681] (**) Razer Razer DeathAdder 2013: (accel) acceleration profile 0
[ 850.681] (**) Razer Razer DeathAdder 2013: (accel) acceleration factor: 2.000
[ 850.681] (**) Razer Razer DeathAdder 2013: (accel) acceleration threshold: 4
[ 850.681] (II) config/udev: Adding input device Razer Razer DeathAdder 2013 (/dev/input/mouse0)
[ 850.681] (II) No input driver specified, ignoring this device.
[ 850.681] (II) This device may have been added with another device file.
[ 850.681] (II) config/udev: Adding input device Razer Razer DeathAdder 2013 (/dev/input/event1)
[ 850.681] (**) Razer Razer DeathAdder 2013: Applying InputClass "evdev keyboard catchall"
[ 850.681] (II) Using input driver 'evdev' for 'Razer Razer DeathAdder 2013'
[ 850.681] (**) Razer Razer DeathAdder 2013: always reports core events
[ 850.681] (**) evdev: Razer Razer DeathAdder 2013: Device: "/dev/input/event1"
[ 850.681] (II) evdev: Razer Razer DeathAdder 2013: Using mtdev for this device
[ 850.681] (--) evdev: Razer Razer DeathAdder 2013: Vendor 0x1532 Product 0x37
[ 850.681] (--) evdev: Razer Razer DeathAdder 2013: Found 1 mouse buttons
[ 850.681] (--) evdev: Razer Razer DeathAdder 2013: Found scroll wheel(s)
[ 850.681] (--) evdev: Razer Razer DeathAdder 2013: Found relative axes
[ 850.681] (II) evdev: Razer Razer DeathAdder 2013: Forcing relative x/y axes to exist.
[ 850.681] (--) evdev: Razer Razer DeathAdder 2013: Found absolute axes
[ 850.681] (--) evdev: Razer Razer DeathAdder 2013: Found absolute multitouch axes
[ 850.681] (--) evdev: Razer Razer DeathAdder 2013: Found keys
[ 850.681] (II) evdev: Razer Razer DeathAdder 2013: Configuring as mouse
[ 850.681] (II) evdev: Razer Razer DeathAdder 2013: Configuring as keyboard
[ 850.681] (II) evdev: Razer Razer DeathAdder 2013: Adding scrollwheel support
[ 850.681] (**) evdev: Razer Razer DeathAdder 2013: YAxisMapping: buttons 4 and 5
[ 850.681] (**) evdev: Razer Razer DeathAdder 2013: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 850.681] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.1/input/input2/event1"
[ 850.681] (II) XINPUT: Adding extended input device "Razer Razer DeathAdder 2013" (type: KEYBOARD, id 12)
[ 850.681] (**) Option "xkb_rules" "evdev"
[ 850.681] (**) Option "xkb_model" "pc104"
[ 850.681] (**) Option "xkb_layout" "us"
[ 850.681] (II) evdev: Razer Razer DeathAdder 2013: initialized for relative axes.
[ 850.681] (WW) evdev: Razer Razer DeathAdder 2013: ignoring absolute axes.
[ 850.681] (**) Razer Razer DeathAdder 2013: (accel) keeping acceleration scheme 1
[ 850.681] (**) Razer Razer DeathAdder 2013: (accel) acceleration profile 0
[ 850.681] (**) Razer Razer DeathAdder 2013: (accel) acceleration factor: 2.000
[ 850.681] (**) Razer Razer DeathAdder 2013: (accel) acceleration threshold: 4
[ 850.681] (II) config/udev: Adding input device Razer Razer DeathAdder 2013 (/dev/input/event2)
[ 850.681] (**) Razer Razer DeathAdder 2013: Applying InputClass "evdev keyboard catchall"
[ 850.681] (II) Using input driver 'evdev' for 'Razer Razer DeathAdder 2013'
[ 850.681] (**) Razer Razer DeathAdder 2013: always reports core events
[ 850.681] (**) evdev: Razer Razer DeathAdder 2013: Device: "/dev/input/event2"
[ 850.681] (--) evdev: Razer Razer DeathAdder 2013: Vendor 0x1532 Product 0x37
[ 850.681] (--) evdev: Razer Razer DeathAdder 2013: Found keys
[ 850.681] (II) evdev: Razer Razer DeathAdder 2013: Configuring as keyboard
[ 850.681] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.2/input/input3/event2"
[ 850.681] (II) XINPUT: Adding extended input device "Razer Razer DeathAdder 2013" (type: KEYBOARD, id 13)
[ 850.681] (**) Option "xkb_rules" "evdev"
[ 850.681] (**) Option "xkb_model" "pc104"
[ 850.681] (**) Option "xkb_layout" "us"
[ 850.682] (II) config/udev: Adding input device HDA Intel PCH Front Mic (/dev/input/event18)
[ 850.682] (II) No input driver specified, ignoring this device.
[ 850.682] (II) This device may have been added with another device file.
[ 850.682] (II) config/udev: Adding input device HDA Intel PCH Rear Mic (/dev/input/event17)
[ 850.682] (II) No input driver specified, ignoring this device.
[ 850.682] (II) This device may have been added with another device file.
[ 850.682] (II) config/udev: Adding input device HDA Intel PCH Line (/dev/input/event16)
[ 850.682] (II) No input driver specified, ignoring this device.
[ 850.682] (II) This device may have been added with another device file.
[ 850.682] (II) config/udev: Adding input device HDA Intel PCH Line Out Front (/dev/input/event15)
[ 850.682] (II) No input driver specified, ignoring this device.
[ 850.682] (II) This device may have been added with another device file.
[ 850.682] (II) config/udev: Adding input device HDA Intel PCH Line Out Surround (/dev/input/event14)
[ 850.682] (II) No input driver specified, ignoring this device.
[ 850.682] (II) This device may have been added with another device file.
[ 850.682] (II) config/udev: Adding input device HDA Intel PCH Line Out CLFE (/dev/input/event13)
[ 850.682] (II) No input driver specified, ignoring this device.
[ 850.682] (II) This device may have been added with another device file.
[ 850.682] (II) config/udev: Adding input device HDA Intel PCH Line Out Side (/dev/input/event12)
[ 850.682] (II) No input driver specified, ignoring this device.
[ 850.682] (II) This device may have been added with another device file.
[ 850.682] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event11)
[ 850.682] (II) No input driver specified, ignoring this device.
[ 850.682] (II) This device may have been added with another device file.
[ 850.682] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event10)
[ 850.682] (II) No input driver specified, ignoring this device.
[ 850.682] (II) This device may have been added with another device file.
[ 850.683] (II) config/udev: Adding input device Microsoft® LifeCam NX-6000 (/dev/input/event9)
[ 850.683] (**) Microsoft® LifeCam NX-6000: Applying InputClass "evdev keyboard catchall"
[ 850.683] (II) Using input driver 'evdev' for 'Microsoft® LifeCam NX-6000'
[ 850.683] (**) Microsoft® LifeCam NX-6000: always reports core events
[ 850.683] (**) evdev: Microsoft® LifeCam NX-6000: Device: "/dev/input/event9"
[ 850.683] (--) evdev: Microsoft® LifeCam NX-6000: Vendor 0x45e Product 0xf8
[ 850.683] (--) evdev: Microsoft® LifeCam NX-6000: Found keys
[ 850.683] (II) evdev: Microsoft® LifeCam NX-6000: Configuring as keyboard
[ 850.683] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1c.5/0000:06:00.0/usb5/5-2/5-2:1.0/input/input10/event9"
[ 850.683] (II) XINPUT: Adding extended input device "Microsoft® LifeCam NX-6000" (type: KEYBOARD, id 14)
[ 850.683] (**) Option "xkb_rules" "evdev"
[ 850.683] (**) Option "xkb_model" "pc104"
[ 850.683] (**) Option "xkb_layout" "us"
[ 850.683] (II) config/udev: Adding input device PC Speaker (/dev/input/event8)
[ 850.683] (II) No input driver specified, ignoring this device.
[ 850.683] (II) This device may have been added with another device file.
[ 857.124] (II) evdev: Microsoft® LifeCam NX-6000: Close
[ 857.124] (II) UnloadModule: "evdev"
[ 857.124] (II) evdev: Razer Razer DeathAdder 2013: Close
[ 857.124] (II) UnloadModule: "evdev"
[ 857.124] (II) evdev: Razer Razer DeathAdder 2013: Close
[ 857.124] (II) UnloadModule: "evdev"
[ 857.124] (II) evdev: Razer Razer DeathAdder 2013: Close
[ 857.124] (II) UnloadModule: "evdev"
[ 857.124] (II) evdev: G15 GamePanel LCD: Close
[ 857.124] (II) UnloadModule: "evdev"
[ 857.124] (II) evdev: G15 Gaming Keyboard: Close
[ 857.124] (II) UnloadModule: "evdev"
[ 857.124] (II) evdev: G15 Gaming Keyboard: Close
[ 857.124] (II) UnloadModule: "evdev"
[ 857.124] (II) evdev: Power Button: Close
[ 857.124] (II) UnloadModule: "evdev"
[ 857.124] (II) evdev: Power Button: Close
[ 857.124] (II) UnloadModule: "evdev"
[ 857.647] (EE) Server terminated successfully (0). Closing log file./etc/default/grub
GRUB_DEFAULT=0
GRUB_TIMEOUT=5
GRUB_DISTRIBUTOR="Arch"
GRUB_CMDLINE_LINUX_DEFAULT="quiet"
GRUB_CMDLINE_LINUX=""
# Preload both GPT and MBR modules so that they are not missed
GRUB_PRELOAD_MODULES="part_gpt part_msdos"
# Uncomment to enable Hidden Menu, and optionally hide the timeout count
#GRUB_HIDDEN_TIMEOUT=5
#GRUB_HIDDEN_TIMEOUT_QUIET=true
# Uncomment to use basic console
GRUB_TERMINAL_INPUT=console
# Uncomment to disable graphical terminal
GRUB_TERMINAL_OUTPUT=console
# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
GRUB_GFXMODE=auto
# Uncomment to allow the kernel use the same resolution used by grub
GRUB_GFXPAYLOAD_LINUX=text
# Uncomment if you want GRUB to pass to the Linux kernel the old parameter
# format "root=/dev/xxx" instead of "root=/dev/disk/by-uuid/xxx"
#GRUB_DISABLE_LINUX_UUID=true
# Uncomment to disable generation of recovery mode menu entries
GRUB_DISABLE_RECOVERY=true
# Uncomment and set to the desired menu colors. Used by normal and wallpaper
# modes only. Entries specified as foreground/background.
#GRUB_COLOR_NORMAL="light-blue/black"
#GRUB_COLOR_HIGHLIGHT="light-cyan/blue"
# Uncomment one of them for the gfx desired, a image background or a gfxtheme
#GRUB_BACKGROUND="/path/to/wallpaper"
#GRUB_THEME="/path/to/gfxtheme"
# Uncomment to get a beep at GRUB start
#GRUB_INIT_TUNE="480 440 1"
#GRUB_SAVEDEFAULT="true"
#Fixed out of memory error during installation
GRUB_DISABLE_SUBMENU=yMy graphics card is an NVIDIA GTX 670 and is currently using NVIDIA drivers via the nvidia-304xx package. I greatly appreciate any advice you can give on this issue!
Offline
Here is the result of running dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.12.6-1-ARCH (tobias@T-POWA-LX) (gcc version 4.8.2 (GCC) ) #1 SMP PREEMPT Fri Dec 20 19:39:00 CET 2013
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=0978a4b7-ebe7-4d39-8337-8749156e67c4 rw quiet
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000caf7ffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000caf80000-0x00000000cafa2fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000cafa3000-0x00000000cafdffff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000cafe0000-0x00000000caffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f4000000-0x00000000f7ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000022fdfffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.4 present.
[ 0.000000] DMI: Gigabyte Technology Co., Ltd. Z68X-UD3H-B3/Z68X-UD3H-B3, BIOS F10 10/12/2011
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x22fe00 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CDFFF write-protect
[ 0.000000] CE000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-through
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F00000000 write-back
[ 0.000000] 1 base 0E0000000 mask FE0000000 uncachable
[ 0.000000] 2 base 0D0000000 mask FF0000000 uncachable
[ 0.000000] 3 base 0CC000000 mask FFC000000 uncachable
[ 0.000000] 4 base 0CB800000 mask FFF800000 uncachable
[ 0.000000] 5 base 100000000 mask F00000000 write-back
[ 0.000000] 6 base 200000000 mask FC0000000 write-back
[ 0.000000] 7 base 230000000 mask FF0000000 uncachable
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: update [mem 0xcb800000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xcaf80 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000f5d30-0x000f5d3f] mapped at [ffff8800000f5d30]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[ 0.000000] reserving inaccessible SNB gfx pages
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01b32000, 0x01b32fff] PGTABLE
[ 0.000000] BRK [0x01b33000, 0x01b33fff] PGTABLE
[ 0.000000] BRK [0x01b34000, 0x01b34fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x22fc00000-0x22fdfffff]
[ 0.000000] [mem 0x22fc00000-0x22fdfffff] page 2M
[ 0.000000] BRK [0x01b35000, 0x01b35fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x22c000000-0x22fbfffff]
[ 0.000000] [mem 0x22c000000-0x22fbfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x200000000-0x22bffffff]
[ 0.000000] [mem 0x200000000-0x22bffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0xcaf7ffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0xcadfffff] page 2M
[ 0.000000] [mem 0xcae00000-0xcaf7ffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x1ffffffff]
[ 0.000000] [mem 0x100000000-0x1ffffffff] page 2M
[ 0.000000] BRK [0x01b36000, 0x01b36fff] PGTABLE
[ 0.000000] BRK [0x01b37000, 0x01b37fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x379d2000-0x37ce0fff]
[ 0.000000] ACPI: RSDP 00000000000f7920 00014 (v00 GBT )
[ 0.000000] ACPI: RSDT 00000000cafa3040 00054 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: FACP 00000000cafa3100 00074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: DSDT 00000000cafa31c0 04D4C (v01 GBT GBTUACPI 00001000 MSFT 04000000)
[ 0.000000] ACPI: FACS 00000000caf80000 00040
[ 0.000000] ACPI: MSDM 00000000cafa8080 00055 (v03 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: HPET 00000000cafa8140 00038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098)
[ 0.000000] ACPI: MCFG 00000000cafa81c0 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: ASPT 00000000cafa8300 00034 (v07 GBT PerfTune 312E3042 UTBG 01010101)
[ 0.000000] ACPI: SSPT 00000000cafa8340 02380 (v01 GBT SsptHead 312E3042 UTBG 01010101)
[ 0.000000] ACPI: EUDS 00000000cafaa6c0 000C0 (v01 GBT 00000000 00000000)
[ 0.000000] ACPI: MATS 00000000cafaa780 00034 (v01 GBT 00000000 00000000)
[ 0.000000] ACPI: TAMG 00000000cafaa7e0 00CFA (v01 GBT GBT B0 5455312E BG?? 53450101)
[ 0.000000] ACPI: APIC 00000000cafa7f80 000BC (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: SSDT 00000000cafab500 01F4C (v01 INTEL PPM RCM 80000001 INTL 20061109)
[ 0.000000] ACPI: MATS 00000000cafad480 0AAE6 (v01 MATS RCM 80000001 INTL 20061109)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000022fdfffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x22fdfffff]
[ 0.000000] NODE_DATA [mem 0x22fdf5000-0x22fdf9fff]
[ 0.000000] [ffffea0000000000-ffffea0008bfffff] PMD -> [ffff880227400000-ffff88022f3fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x22fdfffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
[ 0.000000] node 0: [mem 0x00100000-0xcaf7ffff]
[ 0.000000] node 0: [mem 0x100000000-0x22fdfffff]
[ 0.000000] On node 0 totalpages: 2075934
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 158 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 12926 pages used for memmap
[ 0.000000] DMA32 zone: 827264 pages, LIFO batch:31
[ 0.000000] Normal zone: 19448 pages used for memmap
[ 0.000000] Normal zone: 1244672 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x06] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] dfl dfl lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcaf80000-0xcafa2fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcafa3000-0xcafdffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcafe0000-0xcaffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcb000000-0xf3ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf4000000-0xf7ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xffffffff]
[ 0.000000] e820: [mem 0xcb000000-0xf3ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88022fa00000 s86464 r8192 d24128 u262144
[ 0.000000] pcpu-alloc: s86464 r8192 d24128 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2043338
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=0978a4b7-ebe7-4d39-8337-8749156e67c4 rw quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 8090116K/8303736K available (5124K kernel code, 807K rwdata, 1628K rodata, 1144K init, 1288K bss, 213620K reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8.
[ 0.000000] NR_IRQS:8448 nr_irqs:744 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 33554432 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.003333] tsc: Detected 3292.330 MHz processor
[ 0.000001] Calibrating delay loop (skipped), value calculated using timer frequency.. 6587.02 BogoMIPS (lpj=10974433)
[ 0.000003] pid_max: default: 32768 minimum: 301
[ 0.000020] Security Framework initialized
[ 0.000025] AppArmor: AppArmor disabled by boot time parameter
[ 0.000026] Yama: becoming mindful.
[ 0.000368] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.001420] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.001856] Mount-cache hash table entries: 256
[ 0.001968] Initializing cgroup subsys memory
[ 0.001974] Initializing cgroup subsys devices
[ 0.001975] Initializing cgroup subsys freezer
[ 0.001976] Initializing cgroup subsys net_cls
[ 0.001977] Initializing cgroup subsys blkio
[ 0.001991] CPU: Physical Processor ID: 0
[ 0.001992] CPU: Processor Core ID: 0
[ 0.001995] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.001997] mce: CPU supports 9 MCE banks
[ 0.002006] CPU0: Thermal monitoring enabled (TM1)
[ 0.002012] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
tlb_flushall_shift: 5
[ 0.002078] Freeing SMP alternatives memory: 20K (ffffffff819e9000 - ffffffff819ee000)
[ 0.002852] ACPI: Core revision 20130725
[ 0.003936] ACPI: All ACPI Tables successfully acquired
[ 0.009109] ftrace: allocating 20318 entries in 80 pages
[ 0.015897] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.048898] smpboot: CPU0: Intel(R) Core(TM) i5-2500K CPU @ 3.30GHz (fam: 06, model: 2a, stepping: 07)
[ 0.048902] TSC deadline timer enabled
[ 0.048907] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, full-width counters, Intel PMU driver.
[ 0.048912] perf_event_intel: PEBS disabled due to CPU errata, please upgrade microcode
[ 0.048913] ... version: 3
[ 0.048914] ... bit width: 48
[ 0.048915] ... generic registers: 8
[ 0.048915] ... value mask: 0000ffffffffffff
[ 0.048916] ... max period: 0000ffffffffffff
[ 0.048917] ... fixed-purpose events: 3
[ 0.048917] ... event mask: 00000007000000ff
[ 0.085546] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.072270] smpboot: Booting Node 0, Processors # 1 # 2 # 3 OK
[ 0.118847] Brought up 4 CPUs
[ 0.118850] smpboot: Total of 4 processors activated (26349.08 BogoMIPS)
[ 0.120966] devtmpfs: initialized
[ 0.122671] PM: Registering ACPI NVS region [mem 0xcaf80000-0xcafa2fff] (143360 bytes)
[ 0.123185] RTC time: 20:56:18, date: 01/05/14
[ 0.123211] NET: Registered protocol family 16
[ 0.123270] cpuidle: using governor ladder
[ 0.123271] cpuidle: using governor menu
[ 0.123288] ACPI: bus type PCI registered
[ 0.123289] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.123328] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf4000000-0xf7ffffff] (base 0xf4000000)
[ 0.123330] PCI: MMCONFIG at [mem 0xf4000000-0xf7ffffff] reserved in E820
[ 0.125821] PCI: Using configuration type 1 for base access
[ 0.126202] bio: create slab <bio-0> at 0
[ 0.126269] ACPI: Added _OSI(Module Device)
[ 0.126270] ACPI: Added _OSI(Processor Device)
[ 0.126270] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.126271] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.126678] ACPI: EC: Look up EC in DSDT
[ 0.128815] ACPI BIOS Warning (bug): Incorrect checksum in table [TAMG] - 0x42, should be 0x41 (20130725/tbprint-204)
[ 0.129125] ACPI: Interpreter enabled
[ 0.129129] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130725/hwxface-571)
[ 0.129131] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130725/hwxface-571)
[ 0.129137] ACPI: (supports S0 S3 S4 S5)
[ 0.129138] ACPI: Using IOAPIC for interrupt routing
[ 0.129149] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.129201] ACPI: No dock devices found.
[ 0.131496] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f])
[ 0.131499] acpi PNP0A03:00: ACPI _OSC support notification failed, disabling PCIe ASPM
[ 0.131500] acpi PNP0A03:00: Unable to request _OSC control (_OSC support mask: 0x08)
[ 0.131615] ACPI: \_SB_.PCI0.WMI1: can't evaluate _ADR (0x5)
[ 0.131633] ACPI: \_SB_.PCI0.LNKA: can't evaluate _ADR (0x5)
[ 0.131635] ACPI: \_SB_.PCI0.LNKB: can't evaluate _ADR (0x5)
[ 0.131636] ACPI: \_SB_.PCI0.LNKC: can't evaluate _ADR (0x5)
[ 0.131637] ACPI: \_SB_.PCI0.LNKD: can't evaluate _ADR (0x5)
[ 0.131638] ACPI: \_SB_.PCI0.LNKE: can't evaluate _ADR (0x5)
[ 0.131639] ACPI: \_SB_.PCI0.LNKF: can't evaluate _ADR (0x5)
[ 0.131640] ACPI: \_SB_.PCI0.LNK0: can't evaluate _ADR (0x5)
[ 0.131641] ACPI: \_SB_.PCI0.LNK1: can't evaluate _ADR (0x5)
[ 0.131642] ACPI: \_SB_.PCI0.CWDT: can't evaluate _ADR (0x5)
[ 0.131644] ACPI: \_SB_.PCI0.EXPL: can't evaluate _ADR (0x5)
[ 0.131645] PCI host bridge to bus 0000:00
[ 0.131646] pci_bus 0000:00: root bus resource [bus 00-3f]
[ 0.131647] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.131648] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.131650] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.131651] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
[ 0.131652] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff]
[ 0.131653] pci_bus 0000:00: root bus resource [mem 0xcfa00000-0xfebfffff]
[ 0.131658] pci 0000:00:00.0: [8086:0100] type 00 class 0x060000
[ 0.131712] pci 0000:00:01.0: [8086:0101] type 01 class 0x060400
[ 0.131732] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.131779] pci 0000:00:02.0: [8086:0112] type 00 class 0x038000
[ 0.131786] pci 0000:00:02.0: reg 0x10: [mem 0xfb400000-0xfb7fffff 64bit]
[ 0.131791] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.131794] pci 0000:00:02.0: reg 0x20: [io 0xff00-0xff3f]
[ 0.131864] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
[ 0.131883] pci 0000:00:16.0: reg 0x10: [mem 0xfbfff000-0xfbfff00f 64bit]
[ 0.131950] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.132009] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
[ 0.132027] pci 0000:00:1a.0: reg 0x10: [mem 0xfbffe000-0xfbffe3ff]
[ 0.132108] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.132140] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.132166] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
[ 0.132178] pci 0000:00:1b.0: reg 0x10: [mem 0xfbff8000-0xfbffbfff 64bit]
[ 0.132238] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.132268] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.132291] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
[ 0.132355] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.132388] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.132412] pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400
[ 0.132481] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.132514] pci 0000:00:1c.3: System wakeup disabled by ACPI
[ 0.132536] pci 0000:00:1c.4: [8086:1c18] type 01 class 0x060400
[ 0.132605] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.132637] pci 0000:00:1c.4: System wakeup disabled by ACPI
[ 0.132659] pci 0000:00:1c.5: [8086:1c1a] type 01 class 0x060400
[ 0.132729] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.132761] pci 0000:00:1c.5: System wakeup disabled by ACPI
[ 0.132784] pci 0000:00:1c.6: [8086:1c1c] type 01 class 0x060400
[ 0.132854] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
[ 0.132887] pci 0000:00:1c.6: System wakeup disabled by ACPI
[ 0.132908] pci 0000:00:1c.7: [8086:1c1e] type 01 class 0x060400
[ 0.132977] pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
[ 0.133010] pci 0000:00:1c.7: System wakeup disabled by ACPI
[ 0.133036] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
[ 0.133055] pci 0000:00:1d.0: reg 0x10: [mem 0xfbffd000-0xfbffd3ff]
[ 0.133136] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.133167] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.133187] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[ 0.133252] pci 0000:00:1e.0: System wakeup disabled by ACPI
[ 0.133276] pci 0000:00:1f.0: [8086:1c44] type 00 class 0x060100
[ 0.133413] pci 0000:00:1f.2: [8086:1c00] type 00 class 0x01018f
[ 0.133425] pci 0000:00:1f.2: reg 0x10: [io 0xfe00-0xfe07]
[ 0.133432] pci 0000:00:1f.2: reg 0x14: [io 0xfd00-0xfd03]
[ 0.133438] pci 0000:00:1f.2: reg 0x18: [io 0xfc00-0xfc07]
[ 0.133444] pci 0000:00:1f.2: reg 0x1c: [io 0xfb00-0xfb03]
[ 0.133451] pci 0000:00:1f.2: reg 0x20: [io 0xfa00-0xfa0f]
[ 0.133457] pci 0000:00:1f.2: reg 0x24: [io 0xf900-0xf90f]
[ 0.133523] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
[ 0.133536] pci 0000:00:1f.3: reg 0x10: [mem 0xfbffc000-0xfbffc0ff 64bit]
[ 0.133554] pci 0000:00:1f.3: reg 0x20: [io 0x0500-0x051f]
[ 0.133610] pci 0000:00:1f.5: [8086:1c08] type 00 class 0x010185
[ 0.133623] pci 0000:00:1f.5: reg 0x10: [io 0xf700-0xf707]
[ 0.133629] pci 0000:00:1f.5: reg 0x14: [io 0xf600-0xf603]
[ 0.133635] pci 0000:00:1f.5: reg 0x18: [io 0xf500-0xf507]
[ 0.133642] pci 0000:00:1f.5: reg 0x1c: [io 0xf400-0xf403]
[ 0.133648] pci 0000:00:1f.5: reg 0x20: [io 0xf300-0xf30f]
[ 0.133654] pci 0000:00:1f.5: reg 0x24: [io 0xf200-0xf20f]
[ 0.133747] pci 0000:01:00.0: [10de:1189] type 00 class 0x030000
[ 0.133755] pci 0000:01:00.0: reg 0x10: [mem 0xf9000000-0xf9ffffff]
[ 0.133764] pci 0000:01:00.0: reg 0x14: [mem 0xe0000000-0xe7ffffff 64bit pref]
[ 0.133773] pci 0000:01:00.0: reg 0x1c: [mem 0xee000000-0xefffffff 64bit pref]
[ 0.133779] pci 0000:01:00.0: reg 0x24: [io 0xbf00-0xbf7f]
[ 0.133785] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0007ffff pref]
[ 0.133844] pci 0000:01:00.1: [10de:0e0a] type 00 class 0x040300
[ 0.133852] pci 0000:01:00.1: reg 0x10: [mem 0xfaffc000-0xfaffffff]
[ 0.137497] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.137499] pci 0000:00:01.0: bridge window [io 0xb000-0xbfff]
[ 0.137501] pci 0000:00:01.0: bridge window [mem 0xf9000000-0xfaffffff]
[ 0.137503] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.137549] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.137619] pci 0000:03:00.0: [1283:8892] type 01 class 0x060400
[ 0.137763] pci 0000:00:1c.3: PCI bridge to [bus 03-04]
[ 0.137766] pci 0000:00:1c.3: bridge window [io 0xe000-0xefff]
[ 0.137769] pci 0000:00:1c.3: bridge window [mem 0xfbb00000-0xfbbfffff]
[ 0.137849] pci 0000:04:02.0: [1106:3044] type 00 class 0x0c0010
[ 0.137884] pci 0000:04:02.0: reg 0x10: [mem 0xfbbff000-0xfbbff7ff]
[ 0.137903] pci 0000:04:02.0: reg 0x14: [io 0xef00-0xef7f]
[ 0.138052] pci 0000:04:02.0: supports D2
[ 0.138053] pci 0000:04:02.0: PME# supported from D2 D3hot D3cold
[ 0.138157] pci 0000:03:00.0: PCI bridge to [bus 04]
[ 0.138168] pci 0000:03:00.0: bridge window [io 0xe000-0xefff]
[ 0.138174] pci 0000:03:00.0: bridge window [mem 0xfbb00000-0xfbbfffff]
[ 0.138260] pci 0000:05:00.0: [1b6f:7023] type 00 class 0x0c0330
[ 0.138285] pci 0000:05:00.0: reg 0x10: [mem 0xfbaf8000-0xfbafffff 64bit]
[ 0.138403] pci 0000:05:00.0: supports D1 D2
[ 0.138404] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.144168] pci 0000:00:1c.4: PCI bridge to [bus 05]
[ 0.144173] pci 0000:00:1c.4: bridge window [mem 0xfba00000-0xfbafffff]
[ 0.144241] pci 0000:06:00.0: [1b6f:7023] type 00 class 0x0c0330
[ 0.144265] pci 0000:06:00.0: reg 0x10: [mem 0xfbef8000-0xfbefffff 64bit]
[ 0.144383] pci 0000:06:00.0: supports D1 D2
[ 0.144384] pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.150836] pci 0000:00:1c.5: PCI bridge to [bus 06]
[ 0.150841] pci 0000:00:1c.5: bridge window [mem 0xfbe00000-0xfbefffff]
[ 0.150910] pci 0000:07:00.0: [10ec:8168] type 00 class 0x020000
[ 0.150928] pci 0000:07:00.0: reg 0x10: [io 0xde00-0xdeff]
[ 0.150960] pci 0000:07:00.0: reg 0x18: [mem 0xfbdff000-0xfbdfffff 64bit pref]
[ 0.150979] pci 0000:07:00.0: reg 0x20: [mem 0xfbdf8000-0xfbdfbfff 64bit pref]
[ 0.151065] pci 0000:07:00.0: supports D1 D2
[ 0.151066] pci 0000:07:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.157503] pci 0000:00:1c.6: PCI bridge to [bus 07]
[ 0.157506] pci 0000:00:1c.6: bridge window [io 0xd000-0xdfff]
[ 0.157513] pci 0000:00:1c.6: bridge window [mem 0xfbd00000-0xfbdfffff 64bit pref]
[ 0.157575] pci 0000:08:00.0: [1b4b:917a] type 00 class 0x01018f
[ 0.157591] pci 0000:08:00.0: reg 0x10: [io 0xcf00-0xcf07]
[ 0.157602] pci 0000:08:00.0: reg 0x14: [io 0xce00-0xce03]
[ 0.157614] pci 0000:08:00.0: reg 0x18: [io 0xcd00-0xcd07]
[ 0.157625] pci 0000:08:00.0: reg 0x1c: [io 0xcc00-0xcc03]
[ 0.157637] pci 0000:08:00.0: reg 0x20: [io 0xcb00-0xcb0f]
[ 0.157648] pci 0000:08:00.0: reg 0x24: [mem 0xfbcff000-0xfbcff1ff]
[ 0.157660] pci 0000:08:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
[ 0.157716] pci 0000:08:00.0: PME# supported from D3hot
[ 0.164169] pci 0000:00:1c.7: PCI bridge to [bus 08]
[ 0.164172] pci 0000:00:1c.7: bridge window [io 0xc000-0xcfff]
[ 0.164175] pci 0000:00:1c.7: bridge window [mem 0xfbc00000-0xfbcfffff]
[ 0.164240] pci 0000:00:1e.0: PCI bridge to [bus 09] (subtractive decode)
[ 0.164248] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.164249] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.164250] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.164251] pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
[ 0.164252] pci 0000:00:1e.0: bridge window [mem 0xfed40000-0xfed44fff] (subtractive decode)
[ 0.164253] pci 0000:00:1e.0: bridge window [mem 0xcfa00000-0xfebfffff] (subtractive decode)
[ 0.164537] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 11 *12 14 15)
[ 0.164568] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *7 9 10 11 12 14 15)
[ 0.164599] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[ 0.164629] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[ 0.164659] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 0.164689] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 0.164719] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[ 0.164749] ACPI: PCI Interrupt Link [LNK1] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
[ 0.164805] ACPI: Enabled 1 GPEs in block 00 to 3F
[ 0.164808] ACPI: \_SB_.PCI0: notify handler is installed
[ 0.164826] Found 1 acpi root devices
[ 0.164869] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.164870] vgaarb: loaded
[ 0.164871] vgaarb: bridge control possible 0000:01:00.0
[ 0.164890] PCI: Using ACPI for IRQ routing
[ 0.166138] PCI: pci_cache_line_size set to 64 bytes
[ 0.166201] e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff]
[ 0.166202] e820: reserve RAM buffer [mem 0xcaf80000-0xcbffffff]
[ 0.166203] e820: reserve RAM buffer [mem 0x22fe00000-0x22fffffff]
[ 0.166253] NetLabel: Initializing
[ 0.166254] NetLabel: domain hash size = 128
[ 0.166255] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.166262] NetLabel: unlabeled traffic allowed by default
[ 0.166273] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.166277] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.168291] Switched to clocksource hpet
[ 0.170723] pnp: PnP ACPI init
[ 0.170733] ACPI: bus type PNP registered
[ 0.170807] system 00:00: [io 0x04d0-0x04d1] has been reserved
[ 0.170808] system 00:00: [io 0x0290-0x029f] has been reserved
[ 0.170810] system 00:00: [io 0x0800-0x0805] has been reserved
[ 0.170811] system 00:00: [io 0x0290-0x0294] has been reserved
[ 0.170812] system 00:00: [io 0x0880-0x088f] has been reserved
[ 0.170815] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.170820] pnp 00:01: [dma 4]
[ 0.170831] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.170873] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.170895] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.170906] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.170922] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.171088] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.171132] system 00:07: [io 0x0400-0x04cf] could not be reserved
[ 0.171133] system 00:07: [io 0x04d2-0x04ff] has been reserved
[ 0.171135] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.171155] system 00:08: [io 0x1000-0x107f] has been reserved
[ 0.171156] system 00:08: [io 0x1080-0x10ff] has been reserved
[ 0.171157] system 00:08: [io 0x1100-0x117f] has been reserved
[ 0.171158] system 00:08: [io 0x1180-0x11ff] has been reserved
[ 0.171160] system 00:08: Plug and Play ACPI device, IDs ICD0001 PNP0c02 (active)
[ 0.171261] system 00:09: [io 0x0454-0x0457] has been reserved
[ 0.171263] system 00:09: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.171287] system 00:0a: [mem 0xf4000000-0xf7ffffff] has been reserved
[ 0.171289] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.171395] system 00:0b: [mem 0x000ce600-0x000cffff] has been reserved
[ 0.171396] system 00:0b: [mem 0x000f0000-0x000f7fff] could not be reserved
[ 0.171397] system 00:0b: [mem 0x000f8000-0x000fbfff] could not be reserved
[ 0.171398] system 00:0b: [mem 0x000fc000-0x000fffff] could not be reserved
[ 0.171400] system 00:0b: [mem 0xcaf80000-0xcafdffff] could not be reserved
[ 0.171401] system 00:0b: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.171402] system 00:0b: [mem 0x00100000-0xcaf7ffff] could not be reserved
[ 0.171403] system 00:0b: [mem 0xcafe0000-0xcaffffff] has been reserved
[ 0.171405] system 00:0b: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.171406] system 00:0b: [mem 0xfed10000-0xfed1dfff] has been reserved
[ 0.171407] system 00:0b: [mem 0xfed20000-0xfed8ffff] could not be reserved
[ 0.171408] system 00:0b: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.171409] system 00:0b: [mem 0xffb00000-0xffb7ffff] has been reserved
[ 0.171412] system 00:0b: [mem 0xfff00000-0xffffffff] has been reserved
[ 0.171413] system 00:0b: [mem 0x000e0000-0x000effff] has been reserved
[ 0.171414] system 00:0b: [mem 0x20000000-0x201fffff] could not be reserved
[ 0.171415] system 00:0b: [mem 0x40000000-0x400fffff] could not be reserved
[ 0.171416] system 00:0b: [mem 0xcb000000-0xcf9fffff] could not be reserved
[ 0.171418] system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.171436] pnp 00:0c: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.171439] pnp: PnP ACPI: found 13 devices
[ 0.171440] ACPI: bus type PNP unregistered
[ 0.177115] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000
[ 0.177117] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
[ 0.177118] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000
[ 0.177169] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[ 0.177170] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.177172] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.177174] pci 0000:00:1c.0: BAR 14: assigned [mem 0xcfa00000-0xcfbfffff]
[ 0.177176] pci 0000:00:1c.0: BAR 15: assigned [mem 0xcfc00000-0xcfdfffff 64bit pref]
[ 0.177178] pci 0000:00:1c.7: BAR 15: assigned [mem 0xcfe00000-0xcfefffff pref]
[ 0.177179] pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff]
[ 0.177181] pci 0000:01:00.0: BAR 6: assigned [mem 0xe8000000-0xe807ffff pref]
[ 0.177183] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.177184] pci 0000:00:01.0: bridge window [io 0xb000-0xbfff]
[ 0.177186] pci 0000:00:01.0: bridge window [mem 0xf9000000-0xfaffffff]
[ 0.177188] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.177190] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.177192] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 0.177196] pci 0000:00:1c.0: bridge window [mem 0xcfa00000-0xcfbfffff]
[ 0.177199] pci 0000:00:1c.0: bridge window [mem 0xcfc00000-0xcfdfffff 64bit pref]
[ 0.177203] pci 0000:03:00.0: PCI bridge to [bus 04]
[ 0.177207] pci 0000:03:00.0: bridge window [io 0xe000-0xefff]
[ 0.177215] pci 0000:03:00.0: bridge window [mem 0xfbb00000-0xfbbfffff]
[ 0.177230] pci 0000:00:1c.3: PCI bridge to [bus 03-04]
[ 0.177232] pci 0000:00:1c.3: bridge window [io 0xe000-0xefff]
[ 0.177236] pci 0000:00:1c.3: bridge window [mem 0xfbb00000-0xfbbfffff]
[ 0.177242] pci 0000:00:1c.4: PCI bridge to [bus 05]
[ 0.177246] pci 0000:00:1c.4: bridge window [mem 0xfba00000-0xfbafffff]
[ 0.177253] pci 0000:00:1c.5: PCI bridge to [bus 06]
[ 0.177256] pci 0000:00:1c.5: bridge window [mem 0xfbe00000-0xfbefffff]
[ 0.177263] pci 0000:00:1c.6: PCI bridge to [bus 07]
[ 0.177265] pci 0000:00:1c.6: bridge window [io 0xd000-0xdfff]
[ 0.177271] pci 0000:00:1c.6: bridge window [mem 0xfbd00000-0xfbdfffff 64bit pref]
[ 0.177276] pci 0000:08:00.0: BAR 6: assigned [mem 0xcfe00000-0xcfe0ffff pref]
[ 0.177277] pci 0000:00:1c.7: PCI bridge to [bus 08]
[ 0.177279] pci 0000:00:1c.7: bridge window [io 0xc000-0xcfff]
[ 0.177283] pci 0000:00:1c.7: bridge window [mem 0xfbc00000-0xfbcfffff]
[ 0.177285] pci 0000:00:1c.7: bridge window [mem 0xcfe00000-0xcfefffff pref]
[ 0.177290] pci 0000:00:1e.0: PCI bridge to [bus 09]
[ 0.177299] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.177300] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.177301] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.177302] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
[ 0.177303] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff]
[ 0.177304] pci_bus 0000:00: resource 9 [mem 0xcfa00000-0xfebfffff]
[ 0.177306] pci_bus 0000:01: resource 0 [io 0xb000-0xbfff]
[ 0.177307] pci_bus 0000:01: resource 1 [mem 0xf9000000-0xfaffffff]
[ 0.177308] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.177309] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
[ 0.177310] pci_bus 0000:02: resource 1 [mem 0xcfa00000-0xcfbfffff]
[ 0.177311] pci_bus 0000:02: resource 2 [mem 0xcfc00000-0xcfdfffff 64bit pref]
[ 0.177312] pci_bus 0000:03: resource 0 [io 0xe000-0xefff]
[ 0.177313] pci_bus 0000:03: resource 1 [mem 0xfbb00000-0xfbbfffff]
[ 0.177314] pci_bus 0000:04: resource 0 [io 0xe000-0xefff]
[ 0.177315] pci_bus 0000:04: resource 1 [mem 0xfbb00000-0xfbbfffff]
[ 0.177316] pci_bus 0000:05: resource 1 [mem 0xfba00000-0xfbafffff]
[ 0.177317] pci_bus 0000:06: resource 1 [mem 0xfbe00000-0xfbefffff]
[ 0.177319] pci_bus 0000:07: resource 0 [io 0xd000-0xdfff]
[ 0.177320] pci_bus 0000:07: resource 2 [mem 0xfbd00000-0xfbdfffff 64bit pref]
[ 0.177321] pci_bus 0000:08: resource 0 [io 0xc000-0xcfff]
[ 0.177322] pci_bus 0000:08: resource 1 [mem 0xfbc00000-0xfbcfffff]
[ 0.177323] pci_bus 0000:08: resource 2 [mem 0xcfe00000-0xcfefffff pref]
[ 0.177324] pci_bus 0000:09: resource 4 [io 0x0000-0x0cf7]
[ 0.177325] pci_bus 0000:09: resource 5 [io 0x0d00-0xffff]
[ 0.177326] pci_bus 0000:09: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.177327] pci_bus 0000:09: resource 7 [mem 0x000c0000-0x000dffff]
[ 0.177328] pci_bus 0000:09: resource 8 [mem 0xfed40000-0xfed44fff]
[ 0.177329] pci_bus 0000:09: resource 9 [mem 0xcfa00000-0xfebfffff]
[ 0.177347] NET: Registered protocol family 2
[ 0.177469] TCP established hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.177604] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.177702] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.177716] TCP: reno registered
[ 0.177723] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.177745] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.177791] NET: Registered protocol family 1
[ 0.205021] pci 0000:01:00.0: Boot video device
[ 0.205208] PCI: CLS 4 bytes, default 64
[ 0.205230] Unpacking initramfs...
[ 0.239302] Freeing initrd memory: 3132K (ffff8800379d2000 - ffff880037ce1000)
[ 0.239306] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.239307] software IO TLB [mem 0xc6f80000-0xcaf80000] (64MB) mapped at [ffff8800c6f80000-ffff8800caf7ffff]
[ 0.239433] Scanning for low memory corruption every 60 seconds
[ 0.239599] audit: initializing netlink socket (disabled)
[ 0.239607] type=2000 audit(1388955378.239:1): initialized
[ 0.246937] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.247689] zbud: loaded
[ 0.247790] VFS: Disk quotas dquot_6.5.2
[ 0.247813] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.247905] msgmni has been set to 15807
[ 0.248071] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.248096] io scheduler noop registered
[ 0.248097] io scheduler deadline registered
[ 0.248111] io scheduler cfq registered (default)
[ 0.248221] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 0.248246] pcieport 0000:00:1c.0: enabling device (0000 -> 0003)
[ 0.248620] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.248628] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.248654] vesafb: mode is 1920x1200x32, linelength=7680, pages=0
[ 0.248655] vesafb: scrolling: redraw
[ 0.248656] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.249018] vesafb: framebuffer at 0xef000000, mapped to 0xffffc90004f00000, using 9024k, total 9024k
[ 0.332407] Console: switching to colour frame buffer device 240x75
[ 0.415718] fb0: VESA VGA frame buffer device
[ 0.415726] intel_idle: MWAIT substates: 0x1120
[ 0.415727] intel_idle: v0.4 model 0x2A
[ 0.415728] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.415796] GHES: HEST is not enabled!
[ 0.415828] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.436377] 00:06: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.436599] Linux agpgart interface v0.103
[ 0.436638] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 0.470695] i8042: Failed to disable AUX port, but continuing anyway... Is this a SiS?
[ 0.470696] i8042: If AUX port is really absent please use the 'i8042.noaux' option
[ 0.718364] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.718426] mousedev: PS/2 mouse device common for all mice
[ 0.718467] rtc_cmos 00:03: RTC can wake from S4
[ 0.718587] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 0.718610] rtc_cmos 00:03: alarms up to one month, 242 bytes nvram, hpet irqs
[ 0.718615] Intel P-state driver initializing.
[ 0.718621] Intel pstate controlling: cpu 0
[ 0.718629] Intel pstate controlling: cpu 1
[ 0.718637] Intel pstate controlling: cpu 2
[ 0.718642] Intel pstate controlling: cpu 3
[ 0.718697] drop_monitor: Initializing network drop monitor service
[ 0.718736] TCP: cubic registered
[ 0.718784] NET: Registered protocol family 10
[ 0.718877] NET: Registered protocol family 17
[ 0.718883] Key type dns_resolver registered
[ 0.719154] registered taskstats version 1
[ 0.719759] Magic number: 14:356:952
[ 0.719766] tty tty9: hash matches
[ 0.719784] memory memory5: hash matches
[ 0.719855] rtc_cmos 00:03: setting system clock to 2014-01-05 20:56:19 UTC (1388955379)
[ 0.719875] PM: Hibernation image not present or could not be loaded.
[ 0.720679] Freeing unused kernel memory: 1144K (ffffffff818cb000 - ffffffff819e9000)
[ 0.720680] Write protecting the kernel read-only data: 8192k
[ 0.722451] Freeing unused kernel memory: 1008K (ffff880001504000 - ffff880001600000)
[ 0.723158] Freeing unused kernel memory: 420K (ffff880001797000 - ffff880001800000)
[ 0.728057] systemd-udevd[58]: starting version 208
[ 0.739892] ACPI: bus type USB registered
[ 0.739909] usbcore: registered new interface driver usbfs
[ 0.739922] usbcore: registered new interface driver hub
[ 0.739994] usbcore: registered new device driver usb
[ 0.740201] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.740337] ehci-pci: EHCI PCI platform driver
[ 0.740427] ehci-pci 0000:00:1a.0: setting latency timer to 64
[ 0.740435] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 0.740438] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 0.740449] ehci-pci 0000:00:1a.0: debug port 2
[ 0.741123] SCSI subsystem initialized
[ 0.741881] pcieport 0000:00:1c.3: driver skip pci_set_master, fix it!
[ 0.741919] pci 0000:03:00.0: setting latency timer to 64
[ 0.742057] libata version 3.00 loaded.
[ 0.742533] ahci 0000:08:00.0: version 3.0
[ 0.742538] pcieport 0000:00:1c.7: driver skip pci_set_master, fix it!
[ 0.742592] ahci 0000:08:00.0: irq 41 for MSI/MSI-X
[ 0.742666] ahci 0000:08:00.0: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl IDE mode
[ 0.742667] ahci 0000:08:00.0: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs
[ 0.742850] scsi0 : ahci
[ 0.744349] ehci-pci 0000:00:1a.0: cache line size of 4 is not supported
[ 0.744362] ehci-pci 0000:00:1a.0: irq 18, io mem 0xfbffe000
[ 0.744374] scsi1 : ahci
[ 0.744438] ata1: SATA max UDMA/133 abar m512@0xfbcff000 port 0xfbcff100 irq 41
[ 0.744441] ata2: SATA max UDMA/133 abar m512@0xfbcff000 port 0xfbcff180 irq 41
[ 0.751621] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 0.751718] hub 1-0:1.0: USB hub found
[ 0.751723] hub 1-0:1.0: 2 ports detected
[ 0.751790] xhci_hcd 0000:05:00.0: xHCI Host Controller
[ 0.751797] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 2
[ 0.751862] ehci-pci 0000:00:1d.0: setting latency timer to 64
[ 0.751946] xhci_hcd 0000:05:00.0: irq 42 for MSI/MSI-X
[ 0.752068] hub 2-0:1.0: USB hub found
[ 0.752075] hub 2-0:1.0: 2 ports detected
[ 0.752125] xhci_hcd 0000:05:00.0: xHCI Host Controller
[ 0.752128] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 3
[ 0.752131] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 0.752206] hub 3-0:1.0: USB hub found
[ 0.752213] hub 3-0:1.0: 2 ports detected
[ 0.752262] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 4
[ 0.752272] ehci-pci 0000:00:1d.0: debug port 2
[ 0.756157] ehci-pci 0000:00:1d.0: cache line size of 4 is not supported
[ 0.756167] ehci-pci 0000:00:1d.0: irq 23, io mem 0xfbffd000
[ 0.764968] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 0.765085] hub 4-0:1.0: USB hub found
[ 0.765089] hub 4-0:1.0: 2 ports detected
[ 0.765197] ata_piix 0000:00:1f.2: version 2.13
[ 0.765269] ata_piix 0000:00:1f.2: MAP [
[ 0.765270] P0 P2 P1 P3 ]
[ 0.765297] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 0.765769] scsi2 : ata_piix
[ 0.765867] scsi3 : ata_piix
[ 0.765894] ata3: SATA max UDMA/133 cmd 0xfe00 ctl 0xfd00 bmdma 0xfa00 irq 19
[ 0.765898] ata4: SATA max UDMA/133 cmd 0xfc00 ctl 0xfb00 bmdma 0xfa08 irq 19
[ 0.765970] ata_piix 0000:00:1f.5: MAP [
[ 0.765971] P0 -- P1 -- ]
[ 0.765991] ata_piix 0000:00:1f.5: setting latency timer to 64
[ 0.766276] scsi4 : ata_piix
[ 0.766319] scsi5 : ata_piix
[ 0.766342] ata5: SATA max UDMA/133 cmd 0xf700 ctl 0xf600 bmdma 0xf300 irq 19
[ 0.766345] ata6: SATA max UDMA/133 cmd 0xf500 ctl 0xf400 bmdma 0xf308 irq 19
[ 0.795034] xhci_hcd 0000:06:00.0: xHCI Host Controller
[ 0.795038] xhci_hcd 0000:06:00.0: new USB bus registered, assigned bus number 5
[ 0.795168] xhci_hcd 0000:06:00.0: irq 43 for MSI/MSI-X
[ 0.795340] hub 5-0:1.0: USB hub found
[ 0.795347] hub 5-0:1.0: 2 ports detected
[ 0.795405] xhci_hcd 0000:06:00.0: xHCI Host Controller
[ 0.795408] xhci_hcd 0000:06:00.0: new USB bus registered, assigned bus number 6
[ 0.795555] hub 6-0:1.0: USB hub found
[ 0.795571] hub 6-0:1.0: 2 ports detected
[ 0.801710] firewire_ohci 0000:04:02.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x11
[ 1.058352] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 1.061657] ata1: SATA link down (SStatus 0 SControl 300)
[ 1.061739] ata2: SATA link down (SStatus 0 SControl 300)
[ 1.096047] ata6: SATA link down (SStatus 0 SControl 300)
[ 1.182496] hub 1-1:1.0: USB hub found
[ 1.182677] hub 1-1:1.0: 6 ports detected
[ 1.238357] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.241619] tsc: Refined TSC clocksource calibration: 3292.520 MHz
[ 1.245571] ata5.00: HPA detected: current 976771055, native 976773168
[ 1.245578] ata5.00: ATA-8: ST3500320AS, SD15, max UDMA/133
[ 1.245580] ata5.00: 976771055 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.258918] ata5.00: configured for UDMA/133
[ 1.288321] usb 4-1: new high-speed USB device number 2 using ehci-pci
[ 1.301825] firewire_core 0000:04:02.0: created device fw0: GUID 0049e55080630400, S400
[ 1.412476] hub 4-1:1.0: USB hub found
[ 1.412672] hub 4-1:1.0: 8 ports detected
[ 1.518300] usb 5-1: new high-speed USB device number 2 using xhci_hcd
[ 1.533481] hub 5-1:1.0: USB hub found
[ 1.533813] hub 5-1:1.0: 4 ports detected
[ 1.558345] ata3.00: SATA link down (SStatus 0 SControl 300)
[ 1.558358] ata3.01: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.569504] ata4.00: SATA link down (SStatus 0 SControl 300)
[ 1.569518] ata4.01: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.585224] ata4.01: ATAPI: TSSTcorp CDDVDW SH-S203B, SB03, max UDMA/100
[ 1.591909] ata3.01: ATAPI: LITE-ON DVDRW LH-20A1L, BL05, max UDMA/100
[ 1.598611] ata4.01: configured for UDMA/100
[ 1.621870] ata3.01: configured for UDMA/100
[ 1.623984] scsi 2:0:1:0: CD-ROM LITE-ON DVDRW LH-20A1L BL05 PQ: 0 ANSI: 5
[ 1.625120] scsi 3:0:1:0: CD-ROM TSSTcorp CDDVDW SH-S203B SB03 PQ: 0 ANSI: 5
[ 1.627922] sr1: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.627926] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.628036] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.628212] sr 3:0:1:0: Attached scsi CD-ROM sr1
[ 1.628440] sr 2:0:1:0: Attached scsi CD-ROM sr0
[ 1.628670] scsi 4:0:0:0: Direct-Access ATA ST3500320AS SD15 PQ: 0 ANSI: 5
[ 1.631190] sd 4:0:0:0: [sda] 976771055 512-byte logical blocks: (500 GB/465 GiB)
[ 1.631288] sd 4:0:0:0: [sda] Write Protect is off
[ 1.631292] sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.631331] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.641672] usb 5-2: new high-speed USB device number 3 using xhci_hcd
[ 1.685274] sda: sda1 sda2 sda3 < sda5 sda6 > sda4
[ 1.686224] sd 4:0:0:0: [sda] Attached SCSI disk
[ 1.728391] usb 1-1.3: new full-speed USB device number 3 using ehci-pci
[ 1.814102] hub 1-1.3:1.0: USB hub found
[ 1.814538] hub 1-1.3:1.0: 4 ports detected
[ 1.881817] usb 1-1.4: new full-speed USB device number 4 using ehci-pci
[ 1.969706] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.973121] usbcore: registered new interface driver usbhid
[ 1.973123] usbhid: USB HID core driver
[ 1.973666] input: Razer Razer DeathAdder 2013 as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input1
[ 1.973782] hid-generic 0003:1532:0037.0001: input,hidraw0: USB HID v1.11 Mouse [Razer Razer DeathAdder 2013] on usb-0000:00:1a.0-1.4/input0
[ 1.975749] input: Razer Razer DeathAdder 2013 as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.1/input/input2
[ 1.975824] hid-generic 0003:1532:0037.0002: input,hidraw1: USB HID v1.11 Keyboard [Razer Razer DeathAdder 2013] on usb-0000:00:1a.0-1.4/input1
[ 1.975992] input: Razer Razer DeathAdder 2013 as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.2/input/input3
[ 1.976122] hid-generic 0003:1532:0037.0003: input,hidraw2: USB HID v1.11 Keyboard [Razer Razer DeathAdder 2013] on usb-0000:00:1a.0-1.4/input2
[ 2.081759] usb 1-1.3.1: new low-speed USB device number 5 using ehci-pci
[ 2.174482] input: G15 Gaming Keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3.1/1-1.3.1:1.0/input/input4
[ 2.174637] hid-generic 0003:046D:C226.0004: input,hidraw3: USB HID v1.10 Keyboard [G15 Gaming Keyboard] on usb-0000:00:1a.0-1.3.1/input0
[ 2.180574] input: G15 Gaming Keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3.1/1-1.3.1:1.1/input/input5
[ 2.180815] hid-generic 0003:046D:C226.0005: input,hiddev0,hidraw4: USB HID v1.10 Device [G15 Gaming Keyboard] on usb-0000:00:1a.0-1.3.1/input1
[ 2.241773] Switched to clocksource tsc
[ 2.258519] usb 1-1.3.4: new full-speed USB device number 6 using ehci-pci
[ 2.367732] input: G15 GamePanel LCD as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3.4/1-1.3.4:1.0/input/input6
[ 2.367935] hid-generic 0003:046D:C227.0006: input,hiddev0,hidraw5: USB HID v1.11 Keypad [G15 GamePanel LCD] on usb-0000:00:1a.0-1.3.4/input0
[ 2.489372] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
[ 3.084075] systemd[1]: systemd 208 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
[ 3.088360] systemd[1]: Set hostname to <middle>.
[ 3.525667] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[ 3.525727] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 3.525740] systemd[1]: Starting Remote File Systems.
[ 3.525752] systemd[1]: Reached target Remote File Systems.
[ 3.525762] systemd[1]: Expecting device sys-subsystem-net-devices-eth0.device...
[ 3.525772] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[ 3.525794] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 3.525803] systemd[1]: Starting Delayed Shutdown Socket.
[ 3.525825] systemd[1]: Listening on Delayed Shutdown Socket.
[ 3.525834] systemd[1]: Starting Device-mapper event daemon FIFOs.
[ 3.525857] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 3.525865] systemd[1]: Starting LVM2 metadata daemon socket.
[ 3.525887] systemd[1]: Listening on LVM2 metadata daemon socket.
[ 3.525899] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[ 3.525931] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 3.525939] systemd[1]: Starting Paths.
[ 3.525949] systemd[1]: Reached target Paths.
[ 3.525960] systemd[1]: Starting udev Kernel Socket.
[ 3.525978] systemd[1]: Listening on udev Kernel Socket.
[ 3.525988] systemd[1]: Starting udev Control Socket.
[ 3.526007] systemd[1]: Listening on udev Control Socket.
[ 3.526032] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[ 3.526125] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 3.526135] systemd[1]: Starting Encrypted Volumes.
[ 3.526144] systemd[1]: Reached target Encrypted Volumes.
[ 3.526153] systemd[1]: Starting Journal Socket.
[ 3.526197] systemd[1]: Listening on Journal Socket.
[ 3.526219] systemd[1]: Mounting Huge Pages File System...
[ 3.526628] systemd[1]: Starting Setup Virtual Console...
[ 3.582605] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 3.646788] systemd[1]: Starting Apply Kernel Variables...
[ 3.648837] systemd[1]: Started Load Kernel Modules.
[ 3.650302] systemd[1]: Started Set Up Additional Binary Formats.
[ 3.650322] systemd[1]: Mounting Configuration File System...
[ 3.650568] systemd[1]: Mounting POSIX Message Queue File System...
[ 3.650801] systemd[1]: Starting udev Coldplug all Devices...
[ 3.651114] systemd[1]: Mounting Debug File System...
[ 3.651352] systemd[1]: Starting Journal Service...
[ 3.651651] systemd[1]: Started Journal Service.
[ 3.788860] systemd-journald[139]: Vacuuming done, freed 0 bytes
[ 3.802015] EXT4-fs (sda4): re-mounted. Opts: data=ordered
[ 4.007882] systemd-udevd[159]: starting version 208
[ 4.017428] systemd-journald[139]: Received request to flush runtime journal from PID 1
[ 5.659076] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \GP2C 1 (20130725/utaddress-251)
[ 5.659082] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 5.659100] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 5.667261] mei_me 0000:00:16.0: setting latency timer to 64
[ 5.667294] mei_me 0000:00:16.0: irq 44 for MSI/MSI-X
[ 5.694775] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 5.714885] ACPI: Requesting acpi_cpufreq
[ 5.802129] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input7
[ 5.802134] ACPI: Power Button [PWRB]
[ 5.802167] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input8
[ 5.802169] ACPI: Power Button [PWRF]
[ 5.814672] wmi: Mapper loaded
[ 5.949808] input: PC Speaker as /devices/platform/pcspkr/input/input9
[ 6.145054] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 6.145062] r8169 0000:07:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 6.145066] pcieport 0000:00:1c.6: driver skip pci_set_master, fix it!
[ 6.145281] r8169 0000:07:00.0: irq 45 for MSI/MSI-X
[ 6.145399] r8169 0000:07:00.0 eth0: RTL8168evl/8111evl at 0xffffc900065c0000, 50:e5:49:b1:67:08, XID 0c900800 IRQ 45
[ 6.145400] r8169 0000:07:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 6.386959] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
[ 6.401494] media: Linux media interface: v0.10
[ 6.410664] [drm] Initialized drm 1.1.0 20060810
[ 6.488456] systemd-udevd[176]: renamed network interface eth0 to enp7s0
[ 6.528487] iTCO_vendor_support: vendor-support=0
[ 6.536250] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
[ 6.536270] iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS
[ 6.583974] 3:3:1 : sample bitwidth 24 in over sample bytes 2
[ 6.644494] Linux video capture interface: v2.00
[ 6.673741] microcode: CPU0 sig=0x206a7, pf=0x2, revision=0x23
[ 6.689597] microcode: CPU1 sig=0x206a7, pf=0x2, revision=0x23
[ 6.689979] microcode: CPU2 sig=0x206a7, pf=0x2, revision=0x23
[ 6.690343] microcode: CPU3 sig=0x206a7, pf=0x2, revision=0x23
[ 6.690674] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 6.726634] gpio_ich: GPIO from 180 to 255 on gpio_ich
[ 6.727420] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
[ 7.037003] 3:3:1: cannot get freq at ep 0x84
[ 7.037028] xhci_hcd 0000:06:00.0: ERROR: unexpected command completion code 0x11.
[ 7.037618] usb 5-2: Not enough bandwidth for altsetting 0
[ 7.047654] usbcore: registered new interface driver snd-usb-audio
[ 7.047695] uvcvideo: Found UVC 1.00 device Microsoft\xffffffc2\xffffffae LifeCam NX-6000 (045e:00f8)
[ 7.048599] uvcvideo: UVC non compliance - GET_DEF(PROBE) not supported. Enabling workaround.
[ 7.049319] input: Microsoft\xffffffc2\xffffffae LifeCam NX-6000 as /devices/pci0000:00/0000:00:1c.5/0000:06:00.0/usb5/5-2/5-2:1.0/input/input10
[ 7.049374] usbcore: registered new interface driver uvcvideo
[ 7.049375] USB Video Class driver (1.1.1)
[ 7.173540] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card1/input19
[ 7.173659] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input18
[ 7.173784] input: HDA Intel PCH Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card1/input17
[ 7.173906] input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card1/input16
[ 7.174010] input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card1/input15
[ 7.174058] input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card1/input14
[ 7.174106] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card1/input13
[ 7.174149] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input12
[ 7.174187] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input11
[ 7.174430] hda_intel: Disabling MSI
[ 7.174436] hda-intel 0000:01:00.1: Handle VGA-switcheroo audio client
[ 7.512674] nvidia: module license 'NVIDIA' taints kernel.
[ 7.512678] Disabling lock debugging due to kernel taint
[ 7.561549] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input23
[ 7.561647] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input22
[ 7.561818] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input21
[ 7.561978] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input20
[ 7.562449] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=none
[ 7.562523] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 304.117 Tue Nov 26 21:25:36 PST 2013
[ 8.840160] r8169 0000:07:00.0 enp7s0: link down
[ 8.840164] r8169 0000:07:00.0 enp7s0: link down
[ 8.840192] IPv6: ADDRCONF(NETDEV_UP): enp7s0: link is not ready
[ 10.437501] r8169 0000:07:00.0 enp7s0: link up
[ 10.437511] IPv6: ADDRCONF(NETDEV_CHANGE): enp7s0: link becomes ready
[ 11.432827] NVRM: Your system is not currently configured to drive a VGA console
[ 11.432829] NVRM: on the primary VGA device. The NVIDIA Linux graphics driver
[ 11.432830] NVRM: requires the use of a text-mode VGA console. Use of other console
[ 11.432831] NVRM: drivers including, but not limited to, vesafb, may result in
[ 11.432832] NVRM: corruption and stability problems, and is not supported.Anybody know how to solve this NVRM warning/error at the end? Or if it is even related?
Last edited by BLACKwave (2014-01-06 03:33:05)
Offline
Any ideas? I'm still getting the red screen.
Offline
Pages: 1