AMD 5650/Intel switchable graphics setup configuration woes

MorningWood · 2014-01-07 16:11:33

I was wondering if someone could help me with my POS HP DV7-4100 ATI Radeon 5650/Intel switchable graphics setup. I'm so annoyed with this and don't know how to proceed but it looks like I'm not completing the configuration properly.

I have tried seemingly everything so far:
Catalyst w/ Catalyst-utils
Catalyst-hook
Catalyst w & w/out utils-pxp
Catalyst-total-pxp

Anyway, loading catalyst without xorg.conf seems to get me the closest to a working setup but once I log into Cinnamon, I get a message saying that it has loaded in fallback mode and if I would like to try to restart cinnamon (nothing happens).
This leads me to believe that this is a config issue.
This is the dmesg without an xorg.conf file.

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.12.6-1-ARCH (tobias@T-POWA-LX) (gcc version 4.8.2 (GCC) ) #1 SMP PREEMPT Fri Dec 20 19:39:00 CET 2013
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=a303086c-e564-4347-92f1-8ec5ecbdcf85 ro quiet
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009cfff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009d000-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000009b63efff] usable
[    0.000000] BIOS-e820: [mem 0x000000009b63f000-0x000000009b6befff] reserved
[    0.000000] BIOS-e820: [mem 0x000000009b6bf000-0x000000009b7befff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000009b7bf000-0x000000009b7fefff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000009b7ff000-0x000000009b7fffff] usable
[    0.000000] BIOS-e820: [mem 0x000000009b800000-0x000000009fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f7ffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed13fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed18000-0x00000000fed19fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1b000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffe80000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000001fbffffff] usable
[    0.000000] BIOS-e820: [mem 0x00000001fc000000-0x00000001ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000200000000-0x000000025bffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.6 present.
[    0.000000] DMI: Hewlett-Packard HP Pavilion dv7 Notebook PC/144B, BIOS F.29 11/07/2011
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] No AGP bridge found
[    0.000000] e820: last_pfn = 0x25c000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-EFFFF write-through
[    0.000000]   F0000-FFFFF write-combining
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F80000000 write-back
[    0.000000]   1 base 0FFE00000 mask FFFE00000 write-protect
[    0.000000]   2 base 080000000 mask FE0000000 write-back
[    0.000000]   3 base 09C000000 mask FFC000000 uncachable
[    0.000000]   4 base 09B800000 mask FFF800000 uncachable
[    0.000000]   5 base 100000000 mask F00000000 write-back
[    0.000000]   6 base 200000000 mask F80000000 write-back
[    0.000000]   7 base 25C000000 mask FFC000000 uncachable
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] e820: last_pfn = 0x9b800 max_arch_pfn = 0x400000000
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] BRK [0x01b32000, 0x01b32fff] PGTABLE
[    0.000000] BRK [0x01b33000, 0x01b33fff] PGTABLE
[    0.000000] BRK [0x01b34000, 0x01b34fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x25be00000-0x25bffffff]
[    0.000000]  [mem 0x25be00000-0x25bffffff] page 2M
[    0.000000] BRK [0x01b35000, 0x01b35fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x258000000-0x25bdfffff]
[    0.000000]  [mem 0x258000000-0x25bdfffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x200000000-0x257ffffff]
[    0.000000]  [mem 0x200000000-0x257ffffff] page 2M
[    0.000000] BRK [0x01b36000, 0x01b36fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x00100000-0x9b63efff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0x9b5fffff] page 2M
[    0.000000]  [mem 0x9b600000-0x9b63efff] page 4k
[    0.000000] init_memory_mapping: [mem 0x9b7ff000-0x9b7fffff]
[    0.000000]  [mem 0x9b7ff000-0x9b7fffff] page 4k
[    0.000000] init_memory_mapping: [mem 0x100000000-0x1fbffffff]
[    0.000000]  [mem 0x100000000-0x1fbffffff] page 2M
[    0.000000] BRK [0x01b37000, 0x01b37fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x37a28000-0x37d0bfff]
[    0.000000] ACPI: RSDP 00000000000fe020 00024 (v02 HPQOEM)
[    0.000000] ACPI: XSDT 000000009b7fe120 0007C (v01 HPQOEM SLIC-MPC 00000001      01000013)
[    0.000000] ACPI: FACP 000000009b7fc000 000F4 (v04 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[    0.000000] ACPI: DSDT 000000009b7e9000 0F50F (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[    0.000000] ACPI: FACS 000000009b75e000 00040
[    0.000000] ACPI: ASF! 000000009b7fd000 000A5 (v32 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[    0.000000] ACPI: HPET 000000009b7fb000 00038 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[    0.000000] ACPI: APIC 000000009b7fa000 0008C (v02 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[    0.000000] ACPI: MCFG 000000009b7f9000 0003C (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[    0.000000] ACPI: SLIC 000000009b7e8000 00176 (v01 HPQOEM SLIC-MPC 00000001 SLIC 000F4240)
[    0.000000] ACPI: BOOT 000000009b7e5000 00028 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[    0.000000] ACPI: ASPT 000000009b7e2000 00034 (v04 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[    0.000000] ACPI: WDAT 000000009b7e1000 00224 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[    0.000000] ACPI: SSDT 000000009b7e0000 009F1 (v01  PmRef    CpuPm 00003000 INTL 20051117)
[    0.000000] ACPI: SSDT 000000009b7de000 01B34 (v01 AmdRef  AmdTabl 00001000 INTL 20051117)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000025bffffff]
[    0.000000] Initmem setup node 0 [mem 0x00000000-0x25bffffff]
[    0.000000]   NODE_DATA [mem 0x25bff5000-0x25bff9fff]
[    0.000000]  [ffffea0000000000-ffffea00097fffff] PMD -> [ffff880253600000-ffff88025b5fffff] on node 0
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
[    0.000000]   Normal   [mem 0x100000000-0x25bffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x0009cfff]
[    0.000000]   node   0: [mem 0x00100000-0x9b63efff]
[    0.000000]   node   0: [mem 0x9b7ff000-0x9b7fffff]
[    0.000000]   node   0: [mem 0x100000000-0x1fbffffff]
[    0.000000]   node   0: [mem 0x200000000-0x25bffffff]
[    0.000000] On node 0 totalpages: 2045404
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3996 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 9881 pages used for memmap
[    0.000000]   DMA32 zone: 632384 pages, LIFO batch:31
[    0.000000]   Normal zone: 22272 pages used for memmap
[    0.000000]   Normal zone: 1409024 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x05] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x9b63f000-0x9b6befff]
[    0.000000] PM: Registered nosave memory: [mem 0x9b6bf000-0x9b7befff]
[    0.000000] PM: Registered nosave memory: [mem 0x9b7bf000-0x9b7fefff]
[    0.000000] PM: Registered nosave memory: [mem 0x9b800000-0x9fffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xa0000000-0xefffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xf7ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfeafffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfeb03fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfeb04000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed13fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed14000-0xfed17fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed18000-0xfed19fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1afff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1b000-0xfed1ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffe7ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xffe80000-0xffffffff]
[    0.000000] PM: Registered nosave memory: [mem 0x1fc000000-0x1ffffffff]
[    0.000000] e820: [mem 0xa0000000-0xefffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1
[    0.000000] PERCPU: Embedded 29 pages/cpu @ffff88025bc00000 s86464 r8192 d24128 u262144
[    0.000000] pcpu-alloc: s86464 r8192 d24128 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 2013166
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=a303086c-e564-4347-92f1-8ec5ecbdcf85 ro quiet
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 7968736K/8181616K available (5124K kernel code, 807K rwdata, 1628K rodata, 1144K init, 1288K bss, 212880K reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] 	Dump stacks of tasks blocking RCU-preempt GP.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8.
[    0.000000] NR_IRQS:8448 nr_irqs:744 16
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] allocated 33554432 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.003333] tsc: Detected 2527.100 MHz processor
[    0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 5056.79 BogoMIPS (lpj=8423666)
[    0.000006] pid_max: default: 32768 minimum: 301
[    0.000033] Security Framework initialized
[    0.000044] AppArmor: AppArmor disabled by boot time parameter
[    0.000045] Yama: becoming mindful.
[    0.000537] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.002402] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.003219] Mount-cache hash table entries: 256
[    0.003418] Initializing cgroup subsys memory
[    0.003430] Initializing cgroup subsys devices
[    0.003432] Initializing cgroup subsys freezer
[    0.003434] Initializing cgroup subsys net_cls
[    0.003435] Initializing cgroup subsys blkio
[    0.003456] CPU: Physical Processor ID: 0
[    0.003457] CPU: Processor Core ID: 0
[    0.003463] mce: CPU supports 9 MCE banks
[    0.003473] CPU0: Thermal monitoring enabled (TM1)
[    0.003483] Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
tlb_flushall_shift: 6
[    0.003568] Freeing SMP alternatives memory: 20K (ffffffff819e9000 - ffffffff819ee000)
[    0.004537] ACPI: Core revision 20130725
[    0.013846] ACPI: All ACPI Tables successfully acquired
[    0.038849] ftrace: allocating 20318 entries in 80 pages
[    0.048808] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.081797] smpboot: CPU0: Intel(R) Core(TM) i5 CPU       M 460  @ 2.53GHz (fam: 06, model: 25, stepping: 05)
[    0.187276] Performance Events: PEBS fmt1+, 16-deep LBR, Westmere events, Intel PMU driver.
[    0.187283] perf_event_intel: CPUID marked event: 'bus cycles' unavailable
[    0.187285] ... version:                3
[    0.187286] ... bit width:              48
[    0.187287] ... generic registers:      4
[    0.187288] ... value mask:             0000ffffffffffff
[    0.187288] ... max period:             000000007fffffff
[    0.187289] ... fixed-purpose events:   3
[    0.187290] ... event mask:             000000070000000f
[    0.660504] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.647139] smpboot: Booting Node   0, Processors  #   1 #   2 #   3 OK
[    0.700394] Brought up 4 CPUs
[    0.700400] smpboot: Total of 4 processors activated (20224.16 BogoMIPS)
[    0.702976] devtmpfs: initialized
[    0.705408] PM: Registering ACPI NVS region [mem 0x9b6bf000-0x9b7befff] (1048576 bytes)
[    0.706249] RTC time: 18:58:44, date: 01/06/14
[    0.706292] NET: Registered protocol family 16
[    0.706388] cpuidle: using governor ladder
[    0.706389] cpuidle: using governor menu
[    0.706414] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.706416] ACPI: bus type PCI registered
[    0.706418] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.706482] PCI: MMCONFIG for domain 0000 [bus 00-7f] at [mem 0xf0000000-0xf7ffffff] (base 0xf0000000)
[    0.706485] PCI: MMCONFIG at [mem 0xf0000000-0xf7ffffff] reserved in E820
[    0.713484] PCI: Using configuration type 1 for base access
[    0.714057] bio: create slab <bio-0> at 0
[    0.714171] ACPI: Added _OSI(Module Device)
[    0.714172] ACPI: Added _OSI(Processor Device)
[    0.714174] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.714175] ACPI: Added _OSI(Processor Aggregator Device)
[    0.715777] ACPI: EC: Look up EC in DSDT
[    0.723731] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    0.729362] ACPI: SSDT 000000009b691918 00432 (v01  PmRef  Cpu0Ist 00003000 INTL 20051117)
[    0.729739] ACPI: Dynamic OEM Table Load:
[    0.729741] ACPI: SSDT           (null) 00432 (v01  PmRef  Cpu0Ist 00003000 INTL 20051117)
[    0.729882] ACPI: SSDT 000000009b68f018 00891 (v01  PmRef  Cpu0Cst 00003001 INTL 20051117)
[    0.730243] ACPI: Dynamic OEM Table Load:
[    0.730245] ACPI: SSDT           (null) 00891 (v01  PmRef  Cpu0Cst 00003001 INTL 20051117)
[    0.750624] ACPI: SSDT 000000009b690a98 00303 (v01  PmRef    ApIst 00003000 INTL 20051117)
[    0.751035] ACPI: Dynamic OEM Table Load:
[    0.751037] ACPI: SSDT           (null) 00303 (v01  PmRef    ApIst 00003000 INTL 20051117)
[    0.760515] ACPI: SSDT 000000009b68ed98 00119 (v01  PmRef    ApCst 00003000 INTL 20051117)
[    0.760902] ACPI: Dynamic OEM Table Load:
[    0.760904] ACPI: SSDT           (null) 00119 (v01  PmRef    ApCst 00003000 INTL 20051117)
[    0.813748] ACPI: Interpreter enabled
[    0.813763] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130725/hwxface-571)
[    0.813769] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130725/hwxface-571)
[    0.813788] ACPI: (supports S0 S3 S4 S5)
[    0.813790] ACPI: Using IOAPIC for interrupt routing
[    0.813825] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.813932] ACPI: No dock devices found.
[    1.447844] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-7e])
[    1.447876] \_SB_.PCI0:_OSC invalid UUID
[    1.447877] _OSC request data:1 8 0 
[    1.447907] \_SB_.PCI0:_OSC invalid UUID
[    1.447908] _OSC request data:1 1f 0 
[    1.447911] acpi PNP0A08:00: ACPI _OSC support notification failed, disabling PCIe ASPM
[    1.447913] acpi PNP0A08:00: Unable to request _OSC control (_OSC support mask: 0x08)
[    1.448565] ACPI: \_SB_.PCI0.ACEL: can't evaluate _ADR (0x5)
[    1.448567] ACPI: \_SB_.PCI0.PDRC: can't evaluate _ADR (0x5)
[    1.448573] PCI host bridge to bus 0000:00
[    1.448575] pci_bus 0000:00: root bus resource [bus 00-7e]
[    1.448577] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    1.448578] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
[    1.448580] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    1.448581] pci_bus 0000:00: root bus resource [mem 0xa0000000-0xfeafffff]
[    1.448589] pci 0000:00:00.0: [8086:0044] type 00 class 0x060000
[    1.448606] DMAR: Disabling batched IOTLB flush on Ironlake
[    1.448669] pci 0000:00:01.0: [8086:0045] type 01 class 0x060400
[    1.448699] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    1.448735] pci 0000:00:01.0: System wakeup disabled by ACPI
[    1.448767] pci 0000:00:02.0: [8086:0046] type 00 class 0x030000
[    1.448778] pci 0000:00:02.0: reg 0x10: [mem 0xc0000000-0xc03fffff 64bit]
[    1.448783] pci 0000:00:02.0: reg 0x18: [mem 0xb0000000-0xbfffffff 64bit pref]
[    1.448787] pci 0000:00:02.0: reg 0x20: [io  0x5050-0x5057]
[    1.448892] pci 0000:00:16.0: [8086:3b64] type 00 class 0x078000
[    1.448920] pci 0000:00:16.0: reg 0x10: [mem 0xc4504000-0xc450400f 64bit]
[    1.449016] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    1.449101] pci 0000:00:1a.0: [8086:3b3c] type 00 class 0x0c0320
[    1.449515] pci 0000:00:1a.0: reg 0x10: [mem 0xc450a000-0xc450a3ff]
[    1.451973] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    1.452031] pci 0000:00:1a.0: System wakeup disabled by ACPI
[    1.452072] pci 0000:00:1b.0: [8086:3b56] type 00 class 0x040300
[    1.452093] pci 0000:00:1b.0: reg 0x10: [mem 0xc4500000-0xc4503fff 64bit]
[    1.452188] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    1.452234] pci 0000:00:1b.0: System wakeup disabled by ACPI
[    1.452267] pci 0000:00:1c.0: [8086:3b42] type 01 class 0x060400
[    1.452365] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    1.452412] pci 0000:00:1c.0: System wakeup disabled by ACPI
[    1.452444] pci 0000:00:1c.1: [8086:3b44] type 01 class 0x060400
[    1.452541] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    1.452588] pci 0000:00:1c.1: System wakeup disabled by ACPI
[    1.452634] pci 0000:00:1d.0: [8086:3b34] type 00 class 0x0c0320
[    1.453043] pci 0000:00:1d.0: reg 0x10: [mem 0xc4509000-0xc45093ff]
[    1.455490] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    1.455548] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    1.455583] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[    1.455686] pci 0000:00:1e.0: System wakeup disabled by ACPI
[    1.455720] pci 0000:00:1f.0: [8086:3b09] type 00 class 0x060100
[    1.455888] pci 0000:00:1f.2: [8086:3b29] type 00 class 0x010601
[    1.455915] pci 0000:00:1f.2: reg 0x10: [io  0x5048-0x504f]
[    1.455926] pci 0000:00:1f.2: reg 0x14: [io  0x505c-0x505f]
[    1.455937] pci 0000:00:1f.2: reg 0x18: [io  0x5040-0x5047]
[    1.455947] pci 0000:00:1f.2: reg 0x1c: [io  0x5058-0x505b]
[    1.455958] pci 0000:00:1f.2: reg 0x20: [io  0x5020-0x503f]
[    1.455969] pci 0000:00:1f.2: reg 0x24: [mem 0xc4508000-0xc45087ff]
[    1.456035] pci 0000:00:1f.2: PME# supported from D3hot
[    1.456106] pci 0000:00:1f.3: [8086:3b30] type 00 class 0x0c0500
[    1.456126] pci 0000:00:1f.3: reg 0x10: [mem 0xc4506000-0xc45060ff 64bit]
[    1.456155] pci 0000:00:1f.3: reg 0x20: [io  0x5000-0x501f]
[    1.456246] pci 0000:00:1f.6: [8086:3b32] type 00 class 0x118000
[    1.456272] pci 0000:00:1f.6: reg 0x10: [mem 0xc4507000-0xc4507fff 64bit]
[    1.456465] pci 0000:01:00.0: [1002:68c1] type 00 class 0x030000
[    1.456479] pci 0000:01:00.0: reg 0x10: [mem 0xa0000000-0xafffffff 64bit pref]
[    1.456489] pci 0000:01:00.0: reg 0x18: [mem 0xc4400000-0xc441ffff 64bit]
[    1.456496] pci 0000:01:00.0: reg 0x20: [io  0x4000-0x40ff]
[    1.456507] pci 0000:01:00.0: reg 0x30: [mem 0xfffe0000-0xffffffff pref]
[    1.456544] pci 0000:01:00.0: supports D1 D2
[    1.456587] pci 0000:01:00.1: [1002:aa60] type 00 class 0x040300
[    1.456603] pci 0000:01:00.1: reg 0x10: [mem 0xc4420000-0xc4423fff 64bit]
[    1.456673] pci 0000:01:00.1: supports D1 D2
[    1.456730] pci 0000:00:01.0: PCI bridge to [bus 01]
[    1.456732] pci 0000:00:01.0:   bridge window [io  0x4000-0x4fff]
[    1.456735] pci 0000:00:01.0:   bridge window [mem 0xc4400000-0xc44fffff]
[    1.456738] pci 0000:00:01.0:   bridge window [mem 0xa0000000-0xafffffff 64bit pref]
[    1.456862] pci 0000:02:00.0: [8086:0084] type 00 class 0x028000
[    1.456921] pci 0000:02:00.0: reg 0x10: [mem 0xc3400000-0xc3401fff 64bit]
[    1.457132] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[    1.466741] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    1.466749] pci 0000:00:1c.0:   bridge window [io  0x3000-0x3fff]
[    1.466756] pci 0000:00:1c.0:   bridge window [mem 0xc3400000-0xc43fffff]
[    1.466765] pci 0000:00:1c.0:   bridge window [mem 0xc0400000-0xc13fffff 64bit pref]
[    1.466869] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
[    1.466888] pci 0000:03:00.0: reg 0x10: [io  0x2000-0x20ff]
[    1.466916] pci 0000:03:00.0: reg 0x18: [mem 0xc1404000-0xc1404fff 64bit pref]
[    1.466934] pci 0000:03:00.0: reg 0x20: [mem 0xc1400000-0xc1403fff 64bit pref]
[    1.466946] pci 0000:03:00.0: reg 0x30: [mem 0xffff0000-0xffffffff pref]
[    1.467011] pci 0000:03:00.0: supports D1 D2
[    1.467012] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    1.467054] pci 0000:03:00.0: System wakeup disabled by ACPI
[    1.476687] pci 0000:00:1c.1: PCI bridge to [bus 03]
[    1.476695] pci 0000:00:1c.1:   bridge window [io  0x2000-0x2fff]
[    1.476702] pci 0000:00:1c.1:   bridge window [mem 0xc2400000-0xc33fffff]
[    1.476712] pci 0000:00:1c.1:   bridge window [mem 0xc1400000-0xc23fffff 64bit pref]
[    1.476826] pci 0000:00:1e.0: PCI bridge to [bus 04] (subtractive decode)
[    1.476839] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
[    1.476840] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
[    1.476842] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    1.476843] pci 0000:00:1e.0:   bridge window [mem 0xa0000000-0xfeafffff] (subtractive decode)
[    1.477284] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[    1.477332] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[    1.477378] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[    1.477428] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[    1.477474] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[    1.477521] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[    1.477569] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[    1.477615] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[    1.680263] ACPI: PCI Root Bridge [CPBG] (domain 0000 [bus 7f])
[    1.680266] acpi PNP0A03:00: ACPI _OSC support notification failed, disabling PCIe ASPM
[    1.680268] acpi PNP0A03:00: Unable to request _OSC control (_OSC support mask: 0x08)
[    1.680328] PCI host bridge to bus 0000:7f
[    1.680331] pci_bus 0000:7f: root bus resource [bus 7f]
[    1.680335] pci 0000:7f:00.0: [8086:2c62] type 00 class 0x060000
[    1.680372] pci 0000:7f:00.1: [8086:2d01] type 00 class 0x060000
[    1.680411] pci 0000:7f:02.0: [8086:2d10] type 00 class 0x060000
[    1.680444] pci 0000:7f:02.1: [8086:2d11] type 00 class 0x060000
[    1.680478] pci 0000:7f:02.2: [8086:2d12] type 00 class 0x060000
[    1.680511] pci 0000:7f:02.3: [8086:2d13] type 00 class 0x060000
[    1.680856] ACPI: Enabled 7 GPEs in block 00 to 3F
[    1.680862] ACPI: \_SB_.PCI0: notify handler is installed
[    1.680897] ACPI: \_SB_.CPBG: notify handler is installed
[    1.680908] Found 2 acpi root devices
[    1.680944] ACPI: EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62
[    1.681029] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    1.681034] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none
[    1.681036] vgaarb: loaded
[    1.681036] vgaarb: bridge control possible 0000:01:00.0
[    1.681037] vgaarb: no bridge control possible 0000:00:02.0
[    1.681073] PCI: Using ACPI for IRQ routing
[    1.685883] PCI: pci_cache_line_size set to 64 bytes
[    1.685985] e820: reserve RAM buffer [mem 0x0009d000-0x0009ffff]
[    1.685987] e820: reserve RAM buffer [mem 0x9b63f000-0x9bffffff]
[    1.685988] e820: reserve RAM buffer [mem 0x9b800000-0x9bffffff]
[    1.686076] NetLabel: Initializing
[    1.686077] NetLabel:  domain hash size = 128
[    1.686078] NetLabel:  protocols = UNLABELED CIPSOv4
[    1.686090] NetLabel:  unlabeled traffic allowed by default
[    1.686116] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    1.686121] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    1.688150] Switched to clocksource hpet
[    1.692075] pnp: PnP ACPI init
[    1.692093] ACPI: bus type PNP registered
[    1.692220] pnp 00:00: [dma 4]
[    1.692249] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
[    1.692269] pnp 00:01: Plug and Play ACPI device, IDs INT0800 (active)
[    1.692384] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
[    1.692417] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
[    1.692471] system 00:04: [io  0x0680-0x069f] has been reserved
[    1.692473] system 00:04: [io  0x0800-0x080f] has been reserved
[    1.692475] system 00:04: [io  0xffff] has been reserved
[    1.692477] system 00:04: [io  0xffff] has been reserved
[    1.692479] system 00:04: [io  0x0400-0x047f] could not be reserved
[    1.692480] system 00:04: [io  0x0500-0x057f] has been reserved
[    1.692482] system 00:04: [io  0x164e-0x164f] has been reserved
[    1.692484] system 00:04: [io  0x0380-0x038e] has been reserved
[    1.692487] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.692512] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[    1.692543] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active)
[    1.692578] pnp 00:07: Plug and Play ACPI device, IDs SYN1e1d SYN1e00 SYN0002 PNP0f13 (active)
[    1.692691] pnp 00:08: Plug and Play ACPI device, IDs HPQ0004 (active)
[    1.692891] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    1.692893] system 00:09: [mem 0xfed10000-0xfed13fff] has been reserved
[    1.692895] system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved
[    1.692897] system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved
[    1.692899] system 00:09: [mem 0xf0000000-0xf1ffffff] has been reserved
[    1.692900] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved
[    1.692905] system 00:09: [mem 0xff000000-0xffffffff] could not be reserved
[    1.692906] system 00:09: [mem 0xfee00000-0xfeefffff] could not be reserved
[    1.692908] system 00:09: [mem 0xc4600000-0xc4600fff] has been reserved
[    1.692911] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.891768] pnp: PnP ACPI: found 10 devices
[    1.891775] ACPI: bus type PNP unregistered
[    1.898277] pci 0000:01:00.0: no compatible bridge window for [mem 0xfffe0000-0xffffffff pref]
[    1.898281] pci 0000:03:00.0: no compatible bridge window for [mem 0xffff0000-0xffffffff pref]
[    1.898320] pci 0000:01:00.0: BAR 6: assigned [mem 0xc4440000-0xc445ffff pref]
[    1.898323] pci 0000:00:01.0: PCI bridge to [bus 01]
[    1.898326] pci 0000:00:01.0:   bridge window [io  0x4000-0x4fff]
[    1.898328] pci 0000:00:01.0:   bridge window [mem 0xc4400000-0xc44fffff]
[    1.898331] pci 0000:00:01.0:   bridge window [mem 0xa0000000-0xafffffff 64bit pref]
[    1.898334] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    1.898337] pci 0000:00:1c.0:   bridge window [io  0x3000-0x3fff]
[    1.898343] pci 0000:00:1c.0:   bridge window [mem 0xc3400000-0xc43fffff]
[    1.898347] pci 0000:00:1c.0:   bridge window [mem 0xc0400000-0xc13fffff 64bit pref]
[    1.898355] pci 0000:03:00.0: BAR 6: assigned [mem 0xc1410000-0xc141ffff pref]
[    1.898356] pci 0000:00:1c.1: PCI bridge to [bus 03]
[    1.898359] pci 0000:00:1c.1:   bridge window [io  0x2000-0x2fff]
[    1.898365] pci 0000:00:1c.1:   bridge window [mem 0xc2400000-0xc33fffff]
[    1.898369] pci 0000:00:1c.1:   bridge window [mem 0xc1400000-0xc23fffff 64bit pref]
[    1.898376] pci 0000:00:1e.0: PCI bridge to [bus 04]
[    1.898391] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    1.898392] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    1.898394] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    1.898395] pci_bus 0000:00: resource 7 [mem 0xa0000000-0xfeafffff]
[    1.898397] pci_bus 0000:01: resource 0 [io  0x4000-0x4fff]
[    1.898399] pci_bus 0000:01: resource 1 [mem 0xc4400000-0xc44fffff]
[    1.898400] pci_bus 0000:01: resource 2 [mem 0xa0000000-0xafffffff 64bit pref]
[    1.898402] pci_bus 0000:02: resource 0 [io  0x3000-0x3fff]
[    1.898403] pci_bus 0000:02: resource 1 [mem 0xc3400000-0xc43fffff]
[    1.898405] pci_bus 0000:02: resource 2 [mem 0xc0400000-0xc13fffff 64bit pref]
[    1.898406] pci_bus 0000:03: resource 0 [io  0x2000-0x2fff]
[    1.898408] pci_bus 0000:03: resource 1 [mem 0xc2400000-0xc33fffff]
[    1.898409] pci_bus 0000:03: resource 2 [mem 0xc1400000-0xc23fffff 64bit pref]
[    1.898411] pci_bus 0000:04: resource 4 [io  0x0000-0x0cf7]
[    1.898413] pci_bus 0000:04: resource 5 [io  0x0d00-0xffff]
[    1.898414] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
[    1.898416] pci_bus 0000:04: resource 7 [mem 0xa0000000-0xfeafffff]
[    1.898448] NET: Registered protocol family 2
[    1.898658] TCP established hash table entries: 65536 (order: 8, 1048576 bytes)
[    1.898905] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    1.899101] TCP: Hash tables configured (established 65536 bind 65536)
[    1.899137] TCP: reno registered
[    1.899150] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    1.899184] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    1.899281] NET: Registered protocol family 1
[    1.899297] pci 0000:00:02.0: Boot video device
[    1.924902] PCI: CLS 64 bytes, default 64
[    1.924949] Unpacking initramfs...
[    1.973386] Freeing initrd memory: 2960K (ffff880037a28000 - ffff880037d0c000)
[    1.973392] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    1.973394] software IO TLB [mem 0x9763f000-0x9b63f000] (64MB) mapped at [ffff88009763f000-ffff88009b63efff]
[    1.973427] Simple Boot Flag at 0x44 set to 0x1
[    1.973607] Scanning for low memory corruption every 60 seconds
[    1.973892] audit: initializing netlink socket (disabled)
[    1.973905] type=2000 audit(1389034724.406:1): initialized
[    1.984356] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    1.985602] zbud: loaded
[    1.985767] VFS: Disk quotas dquot_6.5.2
[    1.985802] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.985955] msgmni has been set to 15569
[    1.986298] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    1.986347] io scheduler noop registered
[    1.986349] io scheduler deadline registered
[    1.986371] io scheduler cfq registered (default)
[    1.986564] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[    1.986816] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.986829] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.986868] vesafb: mode is 1600x900x32, linelength=6400, pages=0
[    1.986869] vesafb: scrolling: redraw
[    1.986870] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    1.987210] vesafb: framebuffer at 0xb0000000, mapped to 0xffffc90008f00000, using 5632k, total 5632k
[    2.194780] Console: switching to colour frame buffer device 200x56
[    2.401807] fb0: VESA VGA frame buffer device
[    2.401818] intel_idle: MWAIT substates: 0x1120
[    2.401819] intel_idle: v0.4 model 0x25
[    2.401820] intel_idle: lapic_timer_reliable_states 0xffffffff
[    2.401952] GHES: HEST is not enabled!
[    2.402009] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    2.402448] Linux agpgart interface v0.103
[    2.402509] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    2.424294] serio: i8042 KBD port at 0x60,0x64 irq 1
[    2.424318] serio: i8042 AUX port at 0x60,0x64 irq 12
[    2.424413] mousedev: PS/2 mouse device common for all mice
[    2.426083] rtc_cmos 00:05: RTC can wake from S4
[    2.426226] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[    2.426258] rtc_cmos 00:05: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    2.426312] drop_monitor: Initializing network drop monitor service
[    2.426376] TCP: cubic registered
[    2.426451] NET: Registered protocol family 10
[    2.426607] NET: Registered protocol family 17
[    2.426615] Key type dns_resolver registered
[    2.426872] registered taskstats version 1
[    2.427642]   Magic number: 14:769:998
[    2.427665] pnp 00:00: hash matches
[    2.427763] rtc_cmos 00:05: setting system clock to 2014-01-06 18:58:45 UTC (1389034725)
[    2.427806] PM: Hibernation image not present or could not be loaded.
[    2.428656] Freeing unused kernel memory: 1144K (ffffffff818cb000 - ffffffff819e9000)
[    2.428658] Write protecting the kernel read-only data: 8192k
[    2.430898] Freeing unused kernel memory: 1008K (ffff880001504000 - ffff880001600000)
[    2.431903] Freeing unused kernel memory: 420K (ffff880001797000 - ffff880001800000)
[    2.444295] systemd-udevd[57]: starting version 208
[    2.454799] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    2.473820] SCSI subsystem initialized
[    2.474804] ACPI: bus type USB registered
[    2.474841] usbcore: registered new interface driver usbfs
[    2.474855] usbcore: registered new interface driver hub
[    2.474933] usbcore: registered new device driver usb
[    2.474994] libata version 3.00 loaded.
[    2.475610] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.475775] ehci-pci: EHCI PCI platform driver
[    2.475950] ehci-pci 0000:00:1a.0: setting latency timer to 64
[    2.475967] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    2.475975] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    2.475992] ehci-pci 0000:00:1a.0: debug port 2
[    2.479915] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    2.479939] ehci-pci 0000:00:1a.0: irq 16, io mem 0xc450a000
[    2.487831] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    2.488136] hub 1-0:1.0: USB hub found
[    2.488148] hub 1-0:1.0: 3 ports detected
[    2.488623] ahci 0000:00:1f.2: version 3.0
[    2.488766] ahci 0000:00:1f.2: irq 41 for MSI/MSI-X
[    2.488870] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 3 Gbps 0x33 impl SATA mode
[    2.488874] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems sxs apst 
[    2.488880] ahci 0000:00:1f.2: setting latency timer to 64
[    2.508305] scsi0 : ahci
[    2.508478] scsi1 : ahci
[    2.508661] scsi2 : ahci
[    2.508872] scsi3 : ahci
[    2.509076] scsi4 : ahci
[    2.509232] scsi5 : ahci
[    2.509314] ata1: SATA max UDMA/133 abar m2048@0xc4508000 port 0xc4508100 irq 41
[    2.509319] ata2: SATA max UDMA/133 abar m2048@0xc4508000 port 0xc4508180 irq 41
[    2.509322] ata3: DUMMY
[    2.509324] ata4: DUMMY
[    2.509328] ata5: SATA max UDMA/133 abar m2048@0xc4508000 port 0xc4508300 irq 41
[    2.509332] ata6: SATA max UDMA/133 abar m2048@0xc4508000 port 0xc4508380 irq 41
[    2.509617] ehci-pci 0000:00:1d.0: setting latency timer to 64
[    2.509640] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    2.509655] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    2.509681] ehci-pci 0000:00:1d.0: debug port 2
[    2.513619] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    2.513636] ehci-pci 0000:00:1d.0: irq 21, io mem 0xc4509000
[    2.521138] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    2.521432] hub 2-0:1.0: USB hub found
[    2.521446] hub 2-0:1.0: 3 ports detected
[    2.794491] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    2.827773] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.827866] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.830049] ata2.00: ATAPI: hp BD-ROM BC-5501H, 2.90, max UDMA/100
[    2.831101] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.831251] ata1.00: ATA-8: Corsair CSSD-F60GB2, 2.0, max UDMA/133
[    2.831257] ata1.00: 117231408 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[    2.832374] ata2.00: configured for UDMA/100
[    2.834382] ata6: SATA link down (SStatus 0 SControl 300)
[    2.841297] ata1.00: configured for UDMA/133
[    2.841651] scsi 0:0:0:0: Direct-Access     ATA      Corsair CSSD-F60 2.0  PQ: 0 ANSI: 5
[    2.842799] scsi 1:0:0:0: CD-ROM            hp       BD ROM BC-5501H  2.90 PQ: 0 ANSI: 5
[    2.918525] hub 1-1:1.0: USB hub found
[    2.918713] hub 1-1:1.0: 6 ports detected
[    2.974340] tsc: Refined TSC clocksource calibration: 2527.281 MHz
[    3.024393] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    3.148413] hub 2-1:1.0: USB hub found
[    3.148604] hub 2-1:1.0: 8 ports detected
[    3.227872] usb 1-1.1: new low-speed USB device number 3 using ehci-pci
[    3.231028] ata5.00: ATA-8: TOSHIBA MK5075GSX, GT001U, max UDMA/100
[    3.231032] ata5.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    3.232183] ata5.00: configured for UDMA/100
[    3.232540] scsi 4:0:0:0: Direct-Access     ATA      TOSHIBA MK5075GS GT00 PQ: 0 ANSI: 5
[    3.236887] sd 0:0:0:0: [sda] 117231408 512-byte logical blocks: (60.0 GB/55.8 GiB)
[    3.236939] sd 4:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[    3.236941] sd 4:0:0:0: [sdb] 4096-byte physical blocks
[    3.237016] sd 4:0:0:0: [sdb] Write Protect is off
[    3.237019] sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    3.237035] sd 0:0:0:0: [sda] Write Protect is off
[    3.237040] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    3.237050] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.237086] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.237518]  sda: sda1 sda2 sda3 sda4
[    3.237920] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    3.237923] cdrom: Uniform CD-ROM driver Revision: 3.20
[    3.237954] sd 0:0:0:0: [sda] Attached SCSI disk
[    3.238066] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    3.280297]  sdb: sdb1 sdb3
[    3.281140] sd 4:0:0:0: [sdb] Attached SCSI disk
[    3.320840] hidraw: raw HID events driver (C) Jiri Kosina
[    3.324133] usbcore: registered new interface driver usbhid
[    3.324137] usbhid: USB HID core driver
[    3.324888] input: Microsoft  Microsoft Basic Optical Mouse v2.0  as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/input/input2
[    3.325079] hid-generic 0003:045E:00CB.0001: input,hidraw0: USB HID v1.11 Mouse [Microsoft  Microsoft Basic Optical Mouse v2.0 ] on usb-0000:00:1a.0-1.1/input0
[    3.384362] usb 1-1.6: new full-speed USB device number 4 using ehci-pci
[    3.550965] usb 2-1.3: new full-speed USB device number 3 using ehci-pci
[    3.714287] usb 2-1.5: new high-speed USB device number 4 using ehci-pci
[    3.795307] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
[    3.853249] systemd[1]: systemd 208 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
[    3.854872] systemd[1]: Set hostname to <HP-DV7>.
[    3.858373] systemd-fstab-generator[118]: Mount point swap is not a valid path, ignoring.
[    3.909882] systemd[1]: Cannot add dependency job for unit atieventsd.service, ignoring: Unit acpid.socket failed to load: No such file or directory.
[    3.910099] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[    3.910161] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    3.910174] systemd[1]: Starting Login Prompts.
[    3.910186] systemd[1]: Reached target Login Prompts.
[    3.910195] systemd[1]: Starting Remote File Systems.
[    3.910203] systemd[1]: Reached target Remote File Systems.
[    3.910213] systemd[1]: Starting Device-mapper event daemon FIFOs.
[    3.910241] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[    3.910250] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[    3.910267] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    3.910276] systemd[1]: Starting Delayed Shutdown Socket.
[    3.910299] systemd[1]: Listening on Delayed Shutdown Socket.
[    3.910309] systemd[1]: Starting LVM2 metadata daemon socket.
[    3.910330] systemd[1]: Listening on LVM2 metadata daemon socket.
[    3.910359] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[    3.910451] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    3.910465] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[    3.910492] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    3.910501] systemd[1]: Starting Paths.
[    3.910535] systemd[1]: Reached target Paths.
[    3.910550] systemd[1]: Starting udev Kernel Socket.
[    3.910571] systemd[1]: Listening on udev Kernel Socket.
[    3.910582] systemd[1]: Starting udev Control Socket.
[    3.910602] systemd[1]: Listening on udev Control Socket.
[    3.910612] systemd[1]: Starting Journal Socket.
[    3.910647] systemd[1]: Listening on Journal Socket.
[    3.910661] systemd[1]: Starting udev Coldplug all Devices...
[    3.911488] systemd[1]: Starting Apply Kernel Variables...
[    3.911775] systemd[1]: Mounting Huge Pages File System...
[    3.912052] systemd[1]: Mounting POSIX Message Queue File System...
[    3.914336] systemd[1]: Starting Load Kernel Modules...
[    3.919413] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[    3.920515] systemd[1]: Started Set Up Additional Binary Formats.
[    3.920540] systemd[1]: Starting Journal Service...
[    3.920857] systemd[1]: Started Journal Service.
[    3.934908] systemd-journald[130]: Vacuuming done, freed 0 bytes
[    3.936662] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
[    3.936668] ACPI: Power Button [PWRB]
[    3.936710] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input4
[    3.937069] ACPI: Lid Switch [LID0]
[    3.937129] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[    3.937132] ACPI: Power Button [PWRF]
[    3.938040] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com>
[    3.938042] AMD IOMMUv2 functionality not available on this system
[    3.968968] EXT4-fs (sda4): re-mounted. Opts: discard
[    3.974125] Switched to clocksource tsc
[    3.990703] systemd-udevd[155]: starting version 208
[    3.994113] systemd-journald[130]: Received request to flush runtime journal from PID 1
[    4.011409] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[    4.011415] Disabling lock debugging due to kernel taint
[    4.022291] <6>[fglrx] Maximum main memory to use for locked dma buffers: 7558 MBytes.
[    4.022509] <6>[fglrx]   vendor: 1002 device: 68c1 count: 1
[    4.022812] <6>[fglrx] ioport: bar 4, base 0x4000, size: 0x100
[    4.022823] pci 0000:01:00.0: enabling device (0000 -> 0003)
[    4.023031] <6>[fglrx] Kernel PAT support is enabled
[    4.023051] <6>[fglrx] module loaded - fglrx 13.25.5 [Dec  6 2013] with 1 minors
[    4.092258] ACPI: Requesting acpi_cpufreq
[    4.101543] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20130725/utaddress-251)
[    4.101553] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    4.101558] ACPI Warning: 0x0000000000000540-0x000000000000054f SystemIO conflicts with Region \GPIO 1 (20130725/utaddress-251)
[    4.101563] ACPI Warning: 0x0000000000000540-0x000000000000054f SystemIO conflicts with Region \SGGP 2 (20130725/utaddress-251)
[    4.101568] ACPI Warning: 0x0000000000000540-0x000000000000054f SystemIO conflicts with Region \_SB_.PCI0.P0P3.PEGP.GPIO 3 (20130725/utaddress-251)
[    4.101573] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    4.101575] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIO 1 (20130725/utaddress-251)
[    4.101580] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \SGGP 2 (20130725/utaddress-251)
[    4.101585] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \_SB_.PCI0.P0P3.PEGP.GPIO 3 (20130725/utaddress-251)
[    4.101589] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    4.101591] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 1 (20130725/utaddress-251)
[    4.101595] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \SGGP 2 (20130725/utaddress-251)
[    4.101600] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \_SB_.PCI0.P0P3.PEGP.GPIO 3 (20130725/utaddress-251)
[    4.101604] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    4.101606] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    4.103941] intel ips 0000:00:1f.6: CPU TDP doesn't match expected value (found 25, expected 29)
[    4.104143] intel ips 0000:00:1f.6: failed to get i915 symbols, graphics turbo disabled until i915 loads
[    4.106273] intel ips 0000:00:1f.6: IPS driver initialized, MCP temp limit 90
[    4.106627] agpgart-intel 0000:00:00.0: Intel HD Graphics Chipset
[    4.106742] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[    4.108091] agpgart-intel 0000:00:00.0: detected 32768K stolen memory
[    4.108226] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xb0000000
[    4.108419] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    4.109161] mei_me 0000:00:16.0: setting latency timer to 64
[    4.109212] mei_me 0000:00:16.0: irq 42 for MSI/MSI-X
[    4.116824] ACPI Warning: 0x0000000000005000-0x000000000000501f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20130725/utaddress-251)
[    4.116833] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    4.125699] [drm] Initialized drm 1.1.0 20060810
[    4.151578] [Firmware Bug]: Invalid critical threshold (0)
[    4.152801] hp_accel: hardware type DV7 found
[    4.153398] lis3lv02d: 8 bits sensor found
[    4.162429] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    4.162451] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[    4.162458] pcieport 0000:00:1c.1: driver skip pci_set_master, fix it!
[    4.162734] r8169 0000:03:00.0: irq 43 for MSI/MSI-X
[    4.163141] [drm] Memory usable by graphics device = 2048M
[    4.163146] checking generic (b0000000 580000) vs hw (b0000000 10000000)
[    4.163149] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
[    4.163171] Console: switching to colour dummy device 80x25
[    4.163258] r8169 0000:03:00.0 eth0: RTL8168d/8111d at 0xffffc90008efe000, 78:ac:c0:41:2a:dc, XID 083000c0 IRQ 43
[    4.163262] r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    4.165071] thermal LNXTHERM:00: registered as thermal_zone0
[    4.165073] ACPI: Thermal Zone [TZ01] (60 C)
[    4.167001] i915 0000:00:02.0: setting latency timer to 64
[    4.189598] Bluetooth: Core ver 2.16
[    4.189618] NET: Registered protocol family 31
[    4.189620] Bluetooth: HCI device and connection manager initialized
[    4.189632] Bluetooth: HCI socket layer initialized
[    4.189636] Bluetooth: L2CAP socket layer initialized
[    4.189642] Bluetooth: SCO socket layer initialized
[    4.189750] cfg80211: Calling CRDA to update world regulatory domain
[    4.193820] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input6
[    4.200427] Intel(R) Wireless WiFi driver for Linux, in-tree:
[    4.200432] Copyright(c) 2003-2013 Intel Corporation
[    4.200504] pcieport 0000:00:1c.0: driver skip pci_set_master, fix it!
[    4.200613] iwlwifi 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
[    4.200826] iwlwifi 0000:02:00.0: irq 44 for MSI/MSI-X
[    4.203438] usbcore: registered new interface driver btusb
[    4.206393] iwlwifi 0000:02:00.0: loaded firmware version 39.31.5.1 build 35138 op_mode iwldvm
[    4.209620] i915 0000:00:02.0: irq 45 for MSI/MSI-X
[    4.209634] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[    4.209636] [drm] Driver supports precise vblank timestamp query.
[    4.209838] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=none:owns=none
[    4.212021] input: PC Speaker as /devices/platform/pcspkr/input/input7
[    4.224616] microcode: CPU0 sig=0x20655, pf=0x10, revision=0x2
[    4.235557] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUG disabled
[    4.235562] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUGFS disabled
[    4.235564] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled
[    4.235566] iwlwifi 0000:02:00.0: Detected Intel(R) Centrino(R) Wireless-N 1000 BGN, REV=0x6C
[    4.235664] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
[    4.259013] fbcon: inteldrmfb (fb0) is primary device
[    4.262350] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[    4.284850] iTCO_vendor_support: vendor-support=0
[    4.285523] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
[    4.285561] iTCO_wdt: Found a HM55 TCO device (Version=2, TCOBASE=0x0460)
[    4.285676] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    4.286793] media: Linux media interface: v0.10
[    4.290737] Linux video capture interface: v2.00
[    4.301250] systemd-udevd[174]: renamed network interface eth0 to enp3s0
[    4.302202] uvcvideo: Found UVC 1.00 device HP Webcam (064e:f209)
[    4.304880] cfg80211: World regulatory domain updated:
[    4.304881] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[    4.304883] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[    4.304883] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[    4.304884] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm)
[    4.304885] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm)
[    4.304886] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm)
[    4.304887] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)
[    4.309128] input: HP Webcam as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/input/input9
[    4.309335] usbcore: registered new interface driver uvcvideo
[    4.309336] USB Video Class driver (1.1.1)
[    4.311646] microcode: CPU1 sig=0x20655, pf=0x10, revision=0x2
[    4.316794] ACPI: Battery Slot [BAT0] (battery present)
[    4.325688] microcode: CPU2 sig=0x20655, pf=0x10, revision=0x2
[    4.327465] microcode: CPU3 sig=0x20655, pf=0x10, revision=0x2
[    4.328001] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    4.337248] systemd-udevd[192]: renamed network interface wlan0 to wlo1
[    4.345739] kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround
[    4.355989] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
[    4.364320] iwlwifi 0000:02:00.0: Radio type=0x0-0x0-0x3
[    4.398187] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
[    4.405698] iwlwifi 0000:02:00.0: Radio type=0x0-0x0-0x3
[    4.414845] ACPI: AC Adapter [ACAD] (on-line)
[    4.415293] wmi: Mapper loaded
[    4.435932] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
[    4.467799] input: HP WMI hotkeys as /devices/virtual/input/input10
[    4.498300] r8169 0000:03:00.0 enp3s0: link down
[    4.498337] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[    5.050228] Console: switching to colour frame buffer device 200x56
[    5.056819] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    5.056821] i915 0000:00:02.0: registered panic notifier
[    5.062898] acpi device:02: registered as cooling_device5
[    5.063042] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    5.063105] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input11
[    5.074847] acpi device:14: registered as cooling_device6
[    5.081681] acpi device:15: registered as cooling_device7
[    5.081715] ACPI: Video Device [VGA1] (multi-head: yes  rom: no  post: no)
[    5.081795] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:11/LNXVIDEO:02/input/input12
[    5.081995] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[    5.082246] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
[    5.096419] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input13
[    5.114610] input: HDA Intel MID Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[    5.114695] input: HDA Intel MID Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[    5.114984] hda-intel 0000:01:00.1: Handle VGA-switcheroo audio client
[    5.115037] snd_hda_intel 0000:01:00.1: irq 47 for MSI/MSI-X
[    5.123576] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input16
[    5.343735] wlo1: authenticate with 04:a1:51:18:3f:5a
[    5.357336] wlo1: send auth to 04:a1:51:18:3f:5a (try 1/3)
[    5.360056] wlo1: authenticated
[    5.363243] wlo1: associate with 04:a1:51:18:3f:5a (try 1/3)
[    5.367023] wlo1: RX AssocResp from 04:a1:51:18:3f:5a (capab=0x411 status=0 aid=1)
[    5.370719] wlo1: associated
[    5.370764] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready
[    5.649701] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.4, id: 0x1e0b1, caps: 0xd04773/0xe40000/0x5a0400, board id: 3655, fw id: 631163
[    5.737424] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input8
[    9.301633] intel ips 0000:00:1f.6: i915 driver attached, reenabling gpu turbo
[   12.411184] systemd-journald[130]: File /var/log/journal/9f3480e1044d4c389152563598411bae/user-1000.journal corrupted or uncleanly shut down, renaming and replacing.
[   12.848912] fuse init (API version 7.22)
[   14.026946] traps: cinnamon[570] trap int3 ip:7ff3d815c289 sp:7fffd52060f0 error:0
[   14.114772] systemd-journald[130]: Deleted empty journal /var/log/journal/9f3480e1044d4c389152563598411bae/user-1000@0004ef51d9fd4bb8-e64f5a829660ba01.journal~ (3256320 bytes).
[   14.116644] systemd-journald[130]: Vacuuming done, freed 10727424 bytes
[   14.129219] systemd-journald[130]: Failed to write entry (26 items, 14336620 bytes) despite vacuuming, ignoring: Argument list too long
[   14.305135] ISO 9660 Extensions: Microsoft Joliet Level 3
[   14.347792] ISO 9660 Extensions: RRIP_1991A
[   62.027286] Corrupted low memory at ffff880000006598 (6598 phys) = 100000000000
[   62.027363] ------------[ cut here ]------------
[   62.027373] WARNING: CPU: 0 PID: 45 at arch/x86/kernel/check.c:140 check_for_bios_corruption+0x10f/0x120()
[   62.027375] Memory corruption detected in low memory
[   62.027417] Modules linked in: nls_utf8 isofs fuse snd_hda_codec_hdmi snd_hda_codec_idt hp_wmi sparse_keymap joydev intel_powerclamp coretemp kvm_intel kvm crc32c_intel uvcvideo videobuf2_vmalloc videobuf2_memops videobuf2_core videodev media iTCO_wdt iTCO_vendor_support arc4 iwldvm mac80211 microcode psmouse serio_raw pcspkr btusb iwlwifi bluetooth cfg80211 r8169 snd_hda_intel rfkill hp_accel mii i915 thermal snd_hda_codec lis3lv02d wmi snd_hwdep snd_pcm input_polldev drm_kms_helper snd_page_alloc ac video drm snd_timer i2c_i801 i2c_algo_bit snd battery mei_me i2c_core soundcore intel_agp mei shpchp intel_ips intel_gtt lpc_ich acpi_cpufreq processor evdev fglrx(PO) amd_iommu_v2 button ext4 crc16 mbcache jbd2 hid_generic usbhid hid sr_mod cdrom sd_mod ahci ehci_pci ehci_hcd libahci libata scsi_mod
[   62.027498]  usbcore usb_common
[   62.027504] CPU: 0 PID: 45 Comm: kworker/0:2 Tainted: P           O 3.12.6-1-ARCH #1
[   62.027506] Hardware name: Hewlett-Packard HP Pavilion dv7 Notebook PC/144B, BIOS F.29 11/07/2011
[   62.027511] Workqueue: events check_corruption
[   62.027513]  0000000000000009 ffff88024f0b5d30 ffffffff814ee4fb ffff88024f0b5d78
[   62.027518]  ffff88024f0b5d68 ffffffff81062bcd 0000000000000000 ffff880000010000
[   62.027521]  ffffffff81a28c50 0000000000000001 ffff880000000000 ffff88024f0b5dc8
[   62.027525] Call Trace:
[   62.027534]  [<ffffffff814ee4fb>] dump_stack+0x54/0x8d
[   62.027541]  [<ffffffff81062bcd>] warn_slowpath_common+0x7d/0xa0
[   62.027545]  [<ffffffff81062c3c>] warn_slowpath_fmt+0x4c/0x50
[   62.027548]  [<ffffffff8105046f>] check_for_bios_corruption+0x10f/0x120
[   62.027552]  [<ffffffff8105048e>] check_corruption+0xe/0x40
[   62.027558]  [<ffffffff8107dbc7>] process_one_work+0x167/0x450
[   62.027561]  [<ffffffff8107e5d1>] worker_thread+0x121/0x3a0
[   62.027565]  [<ffffffff8107e4b0>] ? manage_workers.isra.23+0x2b0/0x2b0
[   62.027572]  [<ffffffff81084fe0>] kthread+0xc0/0xd0
[   62.027576]  [<ffffffff81084f20>] ? kthread_create_on_node+0x120/0x120
[   62.027581]  [<ffffffff814fcffc>] ret_from_fork+0x7c/0xb0
[   62.027585]  [<ffffffff81084f20>] ? kthread_create_on_node+0x120/0x120
[   62.027588] ---[ end trace 7db8b9483b232f3c ]---
[  379.895022] systemd-journald[130]: Vacuuming done, freed 7458816 bytes
[  382.437200] usb 2-1.1: new high-speed USB device number 5 using ehci-pci
[  382.535763] usb-storage 2-1.1:1.0: USB Mass Storage device detected
[  382.535904] scsi6 : usb-storage 2-1.1:1.0
[  382.536046] usbcore: registered new interface driver usb-storage
[  383.537746] scsi 6:0:0:0: Direct-Access     SanDisk  Cruzer Glide     1.26 PQ: 0 ANSI: 5
[  383.539529] sd 6:0:0:0: [sdc] 31266816 512-byte logical blocks: (16.0 GB/14.9 GiB)
[  383.541031] sd 6:0:0:0: [sdc] Write Protect is off
[  383.541037] sd 6:0:0:0: [sdc] Mode Sense: 43 00 00 00
[  383.542023] sd 6:0:0:0: [sdc] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[  383.554355]  sdc: sdc1
[  383.558183] sd 6:0:0:0: [sdc] Attached SCSI removable disk

If I run aticonfig --intial, xorg does not start and the dmesg output is:

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.12.6-1-ARCH (tobias@T-POWA-LX) (gcc version 4.8.2 (GCC) ) #1 SMP PREEMPT Fri Dec 20 19:39:00 CET 2013
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=a303086c-e564-4347-92f1-8ec5ecbdcf85 ro quiet
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009cfff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009d000-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000009b63efff] usable
[    0.000000] BIOS-e820: [mem 0x000000009b63f000-0x000000009b6befff] reserved
[    0.000000] BIOS-e820: [mem 0x000000009b6bf000-0x000000009b7befff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000009b7bf000-0x000000009b7fefff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000009b7ff000-0x000000009b7fffff] usable
[    0.000000] BIOS-e820: [mem 0x000000009b800000-0x000000009fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f7ffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed13fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed18000-0x00000000fed19fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1b000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffe80000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000001fbffffff] usable
[    0.000000] BIOS-e820: [mem 0x00000001fc000000-0x00000001ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000200000000-0x000000025bffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.6 present.
[    0.000000] DMI: Hewlett-Packard HP Pavilion dv7 Notebook PC/144B, BIOS F.29 11/07/2011
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] No AGP bridge found
[    0.000000] e820: last_pfn = 0x25c000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-EFFFF write-through
[    0.000000]   F0000-FFFFF write-combining
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F80000000 write-back
[    0.000000]   1 base 0FFE00000 mask FFFE00000 write-protect
[    0.000000]   2 base 080000000 mask FE0000000 write-back
[    0.000000]   3 base 09C000000 mask FFC000000 uncachable
[    0.000000]   4 base 09B800000 mask FFF800000 uncachable
[    0.000000]   5 base 100000000 mask F00000000 write-back
[    0.000000]   6 base 200000000 mask F80000000 write-back
[    0.000000]   7 base 25C000000 mask FFC000000 uncachable
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] e820: last_pfn = 0x9b800 max_arch_pfn = 0x400000000
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] BRK [0x01b32000, 0x01b32fff] PGTABLE
[    0.000000] BRK [0x01b33000, 0x01b33fff] PGTABLE
[    0.000000] BRK [0x01b34000, 0x01b34fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x25be00000-0x25bffffff]
[    0.000000]  [mem 0x25be00000-0x25bffffff] page 2M
[    0.000000] BRK [0x01b35000, 0x01b35fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x258000000-0x25bdfffff]
[    0.000000]  [mem 0x258000000-0x25bdfffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x200000000-0x257ffffff]
[    0.000000]  [mem 0x200000000-0x257ffffff] page 2M
[    0.000000] BRK [0x01b36000, 0x01b36fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x00100000-0x9b63efff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0x9b5fffff] page 2M
[    0.000000]  [mem 0x9b600000-0x9b63efff] page 4k
[    0.000000] init_memory_mapping: [mem 0x9b7ff000-0x9b7fffff]
[    0.000000]  [mem 0x9b7ff000-0x9b7fffff] page 4k
[    0.000000] init_memory_mapping: [mem 0x100000000-0x1fbffffff]
[    0.000000]  [mem 0x100000000-0x1fbffffff] page 2M
[    0.000000] BRK [0x01b37000, 0x01b37fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x37a28000-0x37d0bfff]
[    0.000000] ACPI: RSDP 00000000000fe020 00024 (v02 HPQOEM)
[    0.000000] ACPI: XSDT 000000009b7fe120 0007C (v01 HPQOEM SLIC-MPC 00000001      01000013)
[    0.000000] ACPI: FACP 000000009b7fc000 000F4 (v04 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[    0.000000] ACPI: DSDT 000000009b7e9000 0F50F (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[    0.000000] ACPI: FACS 000000009b75e000 00040
[    0.000000] ACPI: ASF! 000000009b7fd000 000A5 (v32 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[    0.000000] ACPI: HPET 000000009b7fb000 00038 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[    0.000000] ACPI: APIC 000000009b7fa000 0008C (v02 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[    0.000000] ACPI: MCFG 000000009b7f9000 0003C (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[    0.000000] ACPI: SLIC 000000009b7e8000 00176 (v01 HPQOEM SLIC-MPC 00000001 SLIC 000F4240)
[    0.000000] ACPI: BOOT 000000009b7e5000 00028 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[    0.000000] ACPI: ASPT 000000009b7e2000 00034 (v04 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[    0.000000] ACPI: WDAT 000000009b7e1000 00224 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[    0.000000] ACPI: SSDT 000000009b7e0000 009F1 (v01  PmRef    CpuPm 00003000 INTL 20051117)
[    0.000000] ACPI: SSDT 000000009b7de000 01B34 (v01 AmdRef  AmdTabl 00001000 INTL 20051117)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000025bffffff]
[    0.000000] Initmem setup node 0 [mem 0x00000000-0x25bffffff]
[    0.000000]   NODE_DATA [mem 0x25bff5000-0x25bff9fff]
[    0.000000]  [ffffea0000000000-ffffea00097fffff] PMD -> [ffff880253600000-ffff88025b5fffff] on node 0
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
[    0.000000]   Normal   [mem 0x100000000-0x25bffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x0009cfff]
[    0.000000]   node   0: [mem 0x00100000-0x9b63efff]
[    0.000000]   node   0: [mem 0x9b7ff000-0x9b7fffff]
[    0.000000]   node   0: [mem 0x100000000-0x1fbffffff]
[    0.000000]   node   0: [mem 0x200000000-0x25bffffff]
[    0.000000] On node 0 totalpages: 2045404
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3996 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 9881 pages used for memmap
[    0.000000]   DMA32 zone: 632384 pages, LIFO batch:31
[    0.000000]   Normal zone: 22272 pages used for memmap
[    0.000000]   Normal zone: 1409024 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x05] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x9b63f000-0x9b6befff]
[    0.000000] PM: Registered nosave memory: [mem 0x9b6bf000-0x9b7befff]
[    0.000000] PM: Registered nosave memory: [mem 0x9b7bf000-0x9b7fefff]
[    0.000000] PM: Registered nosave memory: [mem 0x9b800000-0x9fffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xa0000000-0xefffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xf7ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfeafffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfeb03fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfeb04000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed13fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed14000-0xfed17fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed18000-0xfed19fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1afff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1b000-0xfed1ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffe7ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xffe80000-0xffffffff]
[    0.000000] PM: Registered nosave memory: [mem 0x1fc000000-0x1ffffffff]
[    0.000000] e820: [mem 0xa0000000-0xefffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1
[    0.000000] PERCPU: Embedded 29 pages/cpu @ffff88025bc00000 s86464 r8192 d24128 u262144
[    0.000000] pcpu-alloc: s86464 r8192 d24128 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 2013166
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=a303086c-e564-4347-92f1-8ec5ecbdcf85 ro quiet
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 7968736K/8181616K available (5124K kernel code, 807K rwdata, 1628K rodata, 1144K init, 1288K bss, 212880K reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] 	Dump stacks of tasks blocking RCU-preempt GP.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8.
[    0.000000] NR_IRQS:8448 nr_irqs:744 16
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] allocated 33554432 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.003333] tsc: Detected 2527.361 MHz processor
[    0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 5056.33 BogoMIPS (lpj=8424536)
[    0.000006] pid_max: default: 32768 minimum: 301
[    0.000033] Security Framework initialized
[    0.000043] AppArmor: AppArmor disabled by boot time parameter
[    0.000045] Yama: becoming mindful.
[    0.000549] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.002402] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.003218] Mount-cache hash table entries: 256
[    0.003417] Initializing cgroup subsys memory
[    0.003429] Initializing cgroup subsys devices
[    0.003431] Initializing cgroup subsys freezer
[    0.003432] Initializing cgroup subsys net_cls
[    0.003434] Initializing cgroup subsys blkio
[    0.003455] CPU: Physical Processor ID: 0
[    0.003456] CPU: Processor Core ID: 0
[    0.003461] mce: CPU supports 9 MCE banks
[    0.003471] CPU0: Thermal monitoring enabled (TM1)
[    0.003481] Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
tlb_flushall_shift: 6
[    0.003568] Freeing SMP alternatives memory: 20K (ffffffff819e9000 - ffffffff819ee000)
[    0.004538] ACPI: Core revision 20130725
[    0.013860] ACPI: All ACPI Tables successfully acquired
[    0.038557] ftrace: allocating 20318 entries in 80 pages
[    0.048522] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.081515] smpboot: CPU0: Intel(R) Core(TM) i5 CPU       M 460  @ 2.53GHz (fam: 06, model: 25, stepping: 05)
[    0.186844] Performance Events: PEBS fmt1+, 16-deep LBR, Westmere events, Intel PMU driver.
[    0.186850] perf_event_intel: CPUID marked event: 'bus cycles' unavailable
[    0.186853] ... version:                3
[    0.186853] ... bit width:              48
[    0.186854] ... generic registers:      4
[    0.186855] ... value mask:             0000ffffffffffff
[    0.186856] ... max period:             000000007fffffff
[    0.186857] ... fixed-purpose events:   3
[    0.186858] ... event mask:             000000070000000f
[    0.226935] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.213570] smpboot: Booting Node   0, Processors  #   1 #   2 #   3 OK
[    0.703304] Brought up 4 CPUs
[    0.703309] smpboot: Total of 4 processors activated (20226.34 BogoMIPS)
[    0.705889] devtmpfs: initialized
[    0.708495] PM: Registering ACPI NVS region [mem 0x9b6bf000-0x9b7befff] (1048576 bytes)
[    0.709334] RTC time: 19:10:57, date: 01/06/14
[    0.709375] NET: Registered protocol family 16
[    0.709472] cpuidle: using governor ladder
[    0.709474] cpuidle: using governor menu
[    0.709498] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.709500] ACPI: bus type PCI registered
[    0.709502] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.709567] PCI: MMCONFIG for domain 0000 [bus 00-7f] at [mem 0xf0000000-0xf7ffffff] (base 0xf0000000)
[    0.709570] PCI: MMCONFIG at [mem 0xf0000000-0xf7ffffff] reserved in E820
[    0.716568] PCI: Using configuration type 1 for base access
[    0.717143] bio: create slab <bio-0> at 0
[    0.717256] ACPI: Added _OSI(Module Device)
[    0.717258] ACPI: Added _OSI(Processor Device)
[    0.717259] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.717260] ACPI: Added _OSI(Processor Aggregator Device)
[    0.718864] ACPI: EC: Look up EC in DSDT
[    0.729996] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    0.735636] ACPI: SSDT 000000009b691918 00432 (v01  PmRef  Cpu0Ist 00003000 INTL 20051117)
[    0.736013] ACPI: Dynamic OEM Table Load:
[    0.736015] ACPI: SSDT           (null) 00432 (v01  PmRef  Cpu0Ist 00003000 INTL 20051117)
[    0.736156] ACPI: SSDT 000000009b68f018 00891 (v01  PmRef  Cpu0Cst 00003001 INTL 20051117)
[    0.736517] ACPI: Dynamic OEM Table Load:
[    0.736519] ACPI: SSDT           (null) 00891 (v01  PmRef  Cpu0Cst 00003001 INTL 20051117)
[    0.756857] ACPI: SSDT 000000009b690a98 00303 (v01  PmRef    ApIst 00003000 INTL 20051117)
[    0.757270] ACPI: Dynamic OEM Table Load:
[    0.757271] ACPI: SSDT           (null) 00303 (v01  PmRef    ApIst 00003000 INTL 20051117)
[    0.773392] ACPI: SSDT 000000009b68ed98 00119 (v01  PmRef    ApCst 00003000 INTL 20051117)
[    0.773777] ACPI: Dynamic OEM Table Load:
[    0.773779] ACPI: SSDT           (null) 00119 (v01  PmRef    ApCst 00003000 INTL 20051117)
[    0.823304] ACPI: Interpreter enabled
[    0.823318] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130725/hwxface-571)
[    0.823324] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130725/hwxface-571)
[    0.823344] ACPI: (supports S0 S3 S4 S5)
[    0.823345] ACPI: Using IOAPIC for interrupt routing
[    0.823382] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.823489] ACPI: No dock devices found.
[    1.460752] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-7e])
[    1.460785] \_SB_.PCI0:_OSC invalid UUID
[    1.460786] _OSC request data:1 8 0 
[    1.460815] \_SB_.PCI0:_OSC invalid UUID
[    1.460816] _OSC request data:1 1f 0 
[    1.460819] acpi PNP0A08:00: ACPI _OSC support notification failed, disabling PCIe ASPM
[    1.460821] acpi PNP0A08:00: Unable to request _OSC control (_OSC support mask: 0x08)
[    1.461476] ACPI: \_SB_.PCI0.ACEL: can't evaluate _ADR (0x5)
[    1.461478] ACPI: \_SB_.PCI0.PDRC: can't evaluate _ADR (0x5)
[    1.461484] PCI host bridge to bus 0000:00
[    1.461486] pci_bus 0000:00: root bus resource [bus 00-7e]
[    1.461488] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    1.461489] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
[    1.461491] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    1.461492] pci_bus 0000:00: root bus resource [mem 0xa0000000-0xfeafffff]
[    1.461500] pci 0000:00:00.0: [8086:0044] type 00 class 0x060000
[    1.461516] DMAR: Disabling batched IOTLB flush on Ironlake
[    1.461580] pci 0000:00:01.0: [8086:0045] type 01 class 0x060400
[    1.461610] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    1.461646] pci 0000:00:01.0: System wakeup disabled by ACPI
[    1.461678] pci 0000:00:02.0: [8086:0046] type 00 class 0x030000
[    1.461689] pci 0000:00:02.0: reg 0x10: [mem 0xc0000000-0xc03fffff 64bit]
[    1.461694] pci 0000:00:02.0: reg 0x18: [mem 0xb0000000-0xbfffffff 64bit pref]
[    1.461698] pci 0000:00:02.0: reg 0x20: [io  0x5050-0x5057]
[    1.461802] pci 0000:00:16.0: [8086:3b64] type 00 class 0x078000
[    1.461829] pci 0000:00:16.0: reg 0x10: [mem 0xc4504000-0xc450400f 64bit]
[    1.461924] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    1.462008] pci 0000:00:1a.0: [8086:3b3c] type 00 class 0x0c0320
[    1.462422] pci 0000:00:1a.0: reg 0x10: [mem 0xc450a000-0xc450a3ff]
[    1.464875] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    1.464933] pci 0000:00:1a.0: System wakeup disabled by ACPI
[    1.464974] pci 0000:00:1b.0: [8086:3b56] type 00 class 0x040300
[    1.464995] pci 0000:00:1b.0: reg 0x10: [mem 0xc4500000-0xc4503fff 64bit]
[    1.465090] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    1.465137] pci 0000:00:1b.0: System wakeup disabled by ACPI
[    1.465171] pci 0000:00:1c.0: [8086:3b42] type 01 class 0x060400
[    1.465269] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    1.465316] pci 0000:00:1c.0: System wakeup disabled by ACPI
[    1.465348] pci 0000:00:1c.1: [8086:3b44] type 01 class 0x060400
[    1.465446] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    1.465493] pci 0000:00:1c.1: System wakeup disabled by ACPI
[    1.465539] pci 0000:00:1d.0: [8086:3b34] type 00 class 0x0c0320
[    1.465954] pci 0000:00:1d.0: reg 0x10: [mem 0xc4509000-0xc45093ff]
[    1.468402] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    1.468460] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    1.468494] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[    1.468597] pci 0000:00:1e.0: System wakeup disabled by ACPI
[    1.468631] pci 0000:00:1f.0: [8086:3b09] type 00 class 0x060100
[    1.468798] pci 0000:00:1f.2: [8086:3b29] type 00 class 0x010601
[    1.468825] pci 0000:00:1f.2: reg 0x10: [io  0x5048-0x504f]
[    1.468835] pci 0000:00:1f.2: reg 0x14: [io  0x505c-0x505f]
[    1.468846] pci 0000:00:1f.2: reg 0x18: [io  0x5040-0x5047]
[    1.468856] pci 0000:00:1f.2: reg 0x1c: [io  0x5058-0x505b]
[    1.468867] pci 0000:00:1f.2: reg 0x20: [io  0x5020-0x503f]
[    1.468878] pci 0000:00:1f.2: reg 0x24: [mem 0xc4508000-0xc45087ff]
[    1.468944] pci 0000:00:1f.2: PME# supported from D3hot
[    1.469014] pci 0000:00:1f.3: [8086:3b30] type 00 class 0x0c0500
[    1.469035] pci 0000:00:1f.3: reg 0x10: [mem 0xc4506000-0xc45060ff 64bit]
[    1.469063] pci 0000:00:1f.3: reg 0x20: [io  0x5000-0x501f]
[    1.469153] pci 0000:00:1f.6: [8086:3b32] type 00 class 0x118000
[    1.469180] pci 0000:00:1f.6: reg 0x10: [mem 0xc4507000-0xc4507fff 64bit]
[    1.469374] pci 0000:01:00.0: [1002:68c1] type 00 class 0x030000
[    1.469388] pci 0000:01:00.0: reg 0x10: [mem 0xa0000000-0xafffffff 64bit pref]
[    1.469398] pci 0000:01:00.0: reg 0x18: [mem 0xc4400000-0xc441ffff 64bit]
[    1.469405] pci 0000:01:00.0: reg 0x20: [io  0x4000-0x40ff]
[    1.469416] pci 0000:01:00.0: reg 0x30: [mem 0xfffe0000-0xffffffff pref]
[    1.469453] pci 0000:01:00.0: supports D1 D2
[    1.469497] pci 0000:01:00.1: [1002:aa60] type 00 class 0x040300
[    1.469511] pci 0000:01:00.1: reg 0x10: [mem 0xc4420000-0xc4423fff 64bit]
[    1.469582] pci 0000:01:00.1: supports D1 D2
[    1.469638] pci 0000:00:01.0: PCI bridge to [bus 01]
[    1.469640] pci 0000:00:01.0:   bridge window [io  0x4000-0x4fff]
[    1.469643] pci 0000:00:01.0:   bridge window [mem 0xc4400000-0xc44fffff]
[    1.469646] pci 0000:00:01.0:   bridge window [mem 0xa0000000-0xafffffff 64bit pref]
[    1.469770] pci 0000:02:00.0: [8086:0084] type 00 class 0x028000
[    1.469830] pci 0000:02:00.0: reg 0x10: [mem 0xc3400000-0xc3401fff 64bit]
[    1.470041] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[    1.479636] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    1.479643] pci 0000:00:1c.0:   bridge window [io  0x3000-0x3fff]
[    1.479650] pci 0000:00:1c.0:   bridge window [mem 0xc3400000-0xc43fffff]
[    1.479660] pci 0000:00:1c.0:   bridge window [mem 0xc0400000-0xc13fffff 64bit pref]
[    1.479766] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
[    1.479782] pci 0000:03:00.0: reg 0x10: [io  0x2000-0x20ff]
[    1.479809] pci 0000:03:00.0: reg 0x18: [mem 0xc1404000-0xc1404fff 64bit pref]
[    1.479826] pci 0000:03:00.0: reg 0x20: [mem 0xc1400000-0xc1403fff 64bit pref]
[    1.479838] pci 0000:03:00.0: reg 0x30: [mem 0xffff0000-0xffffffff pref]
[    1.479902] pci 0000:03:00.0: supports D1 D2
[    1.479904] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    1.479946] pci 0000:03:00.0: System wakeup disabled by ACPI
[    1.489581] pci 0000:00:1c.1: PCI bridge to [bus 03]
[    1.489589] pci 0000:00:1c.1:   bridge window [io  0x2000-0x2fff]
[    1.489596] pci 0000:00:1c.1:   bridge window [mem 0xc2400000-0xc33fffff]
[    1.489606] pci 0000:00:1c.1:   bridge window [mem 0xc1400000-0xc23fffff 64bit pref]
[    1.489721] pci 0000:00:1e.0: PCI bridge to [bus 04] (subtractive decode)
[    1.489733] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
[    1.489735] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
[    1.489736] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    1.489738] pci 0000:00:1e.0:   bridge window [mem 0xa0000000-0xfeafffff] (subtractive decode)
[    1.490177] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[    1.490225] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[    1.490271] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[    1.490321] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[    1.490367] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[    1.490414] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[    1.490462] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[    1.490508] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[    1.693139] ACPI: PCI Root Bridge [CPBG] (domain 0000 [bus 7f])
[    1.693143] acpi PNP0A03:00: ACPI _OSC support notification failed, disabling PCIe ASPM
[    1.693144] acpi PNP0A03:00: Unable to request _OSC control (_OSC support mask: 0x08)
[    1.693205] PCI host bridge to bus 0000:7f
[    1.693207] pci_bus 0000:7f: root bus resource [bus 7f]
[    1.693212] pci 0000:7f:00.0: [8086:2c62] type 00 class 0x060000
[    1.693248] pci 0000:7f:00.1: [8086:2d01] type 00 class 0x060000
[    1.693287] pci 0000:7f:02.0: [8086:2d10] type 00 class 0x060000
[    1.693321] pci 0000:7f:02.1: [8086:2d11] type 00 class 0x060000
[    1.693354] pci 0000:7f:02.2: [8086:2d12] type 00 class 0x060000
[    1.693388] pci 0000:7f:02.3: [8086:2d13] type 00 class 0x060000
[    1.693733] ACPI: Enabled 7 GPEs in block 00 to 3F
[    1.693739] ACPI: \_SB_.PCI0: notify handler is installed
[    1.693774] ACPI: \_SB_.CPBG: notify handler is installed
[    1.693785] Found 2 acpi root devices
[    1.693820] ACPI: EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62
[    1.693906] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    1.693911] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none
[    1.693913] vgaarb: loaded
[    1.693914] vgaarb: bridge control possible 0000:01:00.0
[    1.693914] vgaarb: no bridge control possible 0000:00:02.0
[    1.693951] PCI: Using ACPI for IRQ routing
[    1.698751] PCI: pci_cache_line_size set to 64 bytes
[    1.698852] e820: reserve RAM buffer [mem 0x0009d000-0x0009ffff]
[    1.698854] e820: reserve RAM buffer [mem 0x9b63f000-0x9bffffff]
[    1.698855] e820: reserve RAM buffer [mem 0x9b800000-0x9bffffff]
[    1.698942] NetLabel: Initializing
[    1.698943] NetLabel:  domain hash size = 128
[    1.698944] NetLabel:  protocols = UNLABELED CIPSOv4
[    1.698956] NetLabel:  unlabeled traffic allowed by default
[    1.698981] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    1.698985] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    1.701014] Switched to clocksource hpet
[    1.704975] pnp: PnP ACPI init
[    1.704992] ACPI: bus type PNP registered
[    1.705117] pnp 00:00: [dma 4]
[    1.705146] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
[    1.705166] pnp 00:01: Plug and Play ACPI device, IDs INT0800 (active)
[    1.705282] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
[    1.705315] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
[    1.705368] system 00:04: [io  0x0680-0x069f] has been reserved
[    1.705370] system 00:04: [io  0x0800-0x080f] has been reserved
[    1.705372] system 00:04: [io  0xffff] has been reserved
[    1.705374] system 00:04: [io  0xffff] has been reserved
[    1.705376] system 00:04: [io  0x0400-0x047f] could not be reserved
[    1.705377] system 00:04: [io  0x0500-0x057f] has been reserved
[    1.705379] system 00:04: [io  0x164e-0x164f] has been reserved
[    1.705381] system 00:04: [io  0x0380-0x038e] has been reserved
[    1.705384] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.705409] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[    1.705439] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active)
[    1.705475] pnp 00:07: Plug and Play ACPI device, IDs SYN1e1d SYN1e00 SYN0002 PNP0f13 (active)
[    1.705588] pnp 00:08: Plug and Play ACPI device, IDs HPQ0004 (active)
[    1.705789] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    1.705791] system 00:09: [mem 0xfed10000-0xfed13fff] has been reserved
[    1.705793] system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved
[    1.705794] system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved
[    1.705796] system 00:09: [mem 0xf0000000-0xf1ffffff] has been reserved
[    1.705798] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved
[    1.705802] system 00:09: [mem 0xff000000-0xffffffff] could not be reserved
[    1.705804] system 00:09: [mem 0xfee00000-0xfeefffff] could not be reserved
[    1.705806] system 00:09: [mem 0xc4600000-0xc4600fff] has been reserved
[    1.705808] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.904626] pnp: PnP ACPI: found 10 devices
[    1.904629] ACPI: bus type PNP unregistered
[    1.911161] pci 0000:01:00.0: no compatible bridge window for [mem 0xfffe0000-0xffffffff pref]
[    1.911165] pci 0000:03:00.0: no compatible bridge window for [mem 0xffff0000-0xffffffff pref]
[    1.911204] pci 0000:01:00.0: BAR 6: assigned [mem 0xc4440000-0xc445ffff pref]
[    1.911207] pci 0000:00:01.0: PCI bridge to [bus 01]
[    1.911209] pci 0000:00:01.0:   bridge window [io  0x4000-0x4fff]
[    1.911212] pci 0000:00:01.0:   bridge window [mem 0xc4400000-0xc44fffff]
[    1.911214] pci 0000:00:01.0:   bridge window [mem 0xa0000000-0xafffffff 64bit pref]
[    1.911218] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    1.911221] pci 0000:00:1c.0:   bridge window [io  0x3000-0x3fff]
[    1.911226] pci 0000:00:1c.0:   bridge window [mem 0xc3400000-0xc43fffff]
[    1.911231] pci 0000:00:1c.0:   bridge window [mem 0xc0400000-0xc13fffff 64bit pref]
[    1.911238] pci 0000:03:00.0: BAR 6: assigned [mem 0xc1410000-0xc141ffff pref]
[    1.911240] pci 0000:00:1c.1: PCI bridge to [bus 03]
[    1.911243] pci 0000:00:1c.1:   bridge window [io  0x2000-0x2fff]
[    1.911249] pci 0000:00:1c.1:   bridge window [mem 0xc2400000-0xc33fffff]
[    1.911253] pci 0000:00:1c.1:   bridge window [mem 0xc1400000-0xc23fffff 64bit pref]
[    1.911260] pci 0000:00:1e.0: PCI bridge to [bus 04]
[    1.911275] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    1.911276] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    1.911278] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    1.911279] pci_bus 0000:00: resource 7 [mem 0xa0000000-0xfeafffff]
[    1.911281] pci_bus 0000:01: resource 0 [io  0x4000-0x4fff]
[    1.911283] pci_bus 0000:01: resource 1 [mem 0xc4400000-0xc44fffff]
[    1.911284] pci_bus 0000:01: resource 2 [mem 0xa0000000-0xafffffff 64bit pref]
[    1.911286] pci_bus 0000:02: resource 0 [io  0x3000-0x3fff]
[    1.911287] pci_bus 0000:02: resource 1 [mem 0xc3400000-0xc43fffff]
[    1.911289] pci_bus 0000:02: resource 2 [mem 0xc0400000-0xc13fffff 64bit pref]
[    1.911290] pci_bus 0000:03: resource 0 [io  0x2000-0x2fff]
[    1.911292] pci_bus 0000:03: resource 1 [mem 0xc2400000-0xc33fffff]
[    1.911293] pci_bus 0000:03: resource 2 [mem 0xc1400000-0xc23fffff 64bit pref]
[    1.911295] pci_bus 0000:04: resource 4 [io  0x0000-0x0cf7]
[    1.911297] pci_bus 0000:04: resource 5 [io  0x0d00-0xffff]
[    1.911298] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
[    1.911300] pci_bus 0000:04: resource 7 [mem 0xa0000000-0xfeafffff]
[    1.911332] NET: Registered protocol family 2
[    1.911541] TCP established hash table entries: 65536 (order: 8, 1048576 bytes)
[    1.911781] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    1.911962] TCP: Hash tables configured (established 65536 bind 65536)
[    1.911997] TCP: reno registered
[    1.912009] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    1.912043] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    1.912139] NET: Registered protocol family 1
[    1.912155] pci 0000:00:02.0: Boot video device
[    1.937766] PCI: CLS 64 bytes, default 64
[    1.937813] Unpacking initramfs...
[    1.986235] Freeing initrd memory: 2960K (ffff880037a28000 - ffff880037d0c000)
[    1.986241] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    1.986244] software IO TLB [mem 0x9763f000-0x9b63f000] (64MB) mapped at [ffff88009763f000-ffff88009b63efff]
[    1.986274] Simple Boot Flag at 0x44 set to 0x1
[    1.986456] Scanning for low memory corruption every 60 seconds
[    1.986744] audit: initializing netlink socket (disabled)
[    1.986757] type=2000 audit(1389035457.423:1): initialized
[    1.997210] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    1.998457] zbud: loaded
[    1.998621] VFS: Disk quotas dquot_6.5.2
[    1.998656] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.998811] msgmni has been set to 15569
[    1.999151] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    1.999200] io scheduler noop registered
[    1.999202] io scheduler deadline registered
[    1.999225] io scheduler cfq registered (default)
[    1.999423] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[    1.999676] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.999688] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.999726] vesafb: mode is 1600x900x32, linelength=6400, pages=0
[    1.999727] vesafb: scrolling: redraw
[    1.999728] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    2.000067] vesafb: framebuffer at 0xb0000000, mapped to 0xffffc90008f00000, using 5632k, total 5632k
[    2.207663] Console: switching to colour frame buffer device 200x56
[    2.414701] fb0: VESA VGA frame buffer device
[    2.414714] intel_idle: MWAIT substates: 0x1120
[    2.414715] intel_idle: v0.4 model 0x25
[    2.414716] intel_idle: lapic_timer_reliable_states 0xffffffff
[    2.414848] GHES: HEST is not enabled!
[    2.414906] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    2.415344] Linux agpgart interface v0.103
[    2.415406] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    2.440828] serio: i8042 KBD port at 0x60,0x64 irq 1
[    2.440852] serio: i8042 AUX port at 0x60,0x64 irq 12
[    2.440949] mousedev: PS/2 mouse device common for all mice
[    2.442376] rtc_cmos 00:05: RTC can wake from S4
[    2.442522] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[    2.442554] rtc_cmos 00:05: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    2.442608] drop_monitor: Initializing network drop monitor service
[    2.442673] TCP: cubic registered
[    2.442748] NET: Registered protocol family 10
[    2.442903] NET: Registered protocol family 17
[    2.442914] Key type dns_resolver registered
[    2.443171] registered taskstats version 1
[    2.443935]   Magic number: 14:51:192
[    2.443974] acpi device:1e: hash matches
[    2.444063] rtc_cmos 00:05: setting system clock to 2014-01-06 19:10:59 UTC (1389035459)
[    2.444109] PM: Hibernation image not present or could not be loaded.
[    2.444947] Freeing unused kernel memory: 1144K (ffffffff818cb000 - ffffffff819e9000)
[    2.444949] Write protecting the kernel read-only data: 8192k
[    2.447185] Freeing unused kernel memory: 1008K (ffff880001504000 - ffff880001600000)
[    2.448228] Freeing unused kernel memory: 420K (ffff880001797000 - ffff880001800000)
[    2.460494] systemd-udevd[57]: starting version 208
[    2.470087] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    2.492833] ACPI: bus type USB registered
[    2.492906] usbcore: registered new interface driver usbfs
[    2.492934] usbcore: registered new interface driver hub
[    2.493058] usbcore: registered new device driver usb
[    2.494631] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.494634] SCSI subsystem initialized
[    2.494941] ehci-pci: EHCI PCI platform driver
[    2.495165] ehci-pci 0000:00:1a.0: setting latency timer to 64
[    2.495189] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    2.495214] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    2.495242] ehci-pci 0000:00:1a.0: debug port 2
[    2.499207] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    2.499243] ehci-pci 0000:00:1a.0: irq 16, io mem 0xc450a000
[    2.500691] libata version 3.00 loaded.
[    2.507365] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    2.507668] hub 1-0:1.0: USB hub found
[    2.507682] hub 1-0:1.0: 3 ports detected
[    2.508234] ehci-pci 0000:00:1d.0: setting latency timer to 64
[    2.508242] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    2.508252] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    2.508270] ehci-pci 0000:00:1d.0: debug port 2
[    2.512209] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    2.512232] ehci-pci 0000:00:1d.0: irq 21, io mem 0xc4509000
[    2.520681] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    2.520958] hub 2-0:1.0: USB hub found
[    2.520972] hub 2-0:1.0: 3 ports detected
[    2.521222] ahci 0000:00:1f.2: version 3.0
[    2.521440] ahci 0000:00:1f.2: irq 41 for MSI/MSI-X
[    2.521573] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 3 Gbps 0x33 impl SATA mode
[    2.521577] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems sxs apst 
[    2.521584] ahci 0000:00:1f.2: setting latency timer to 64
[    2.541262] scsi0 : ahci
[    2.541562] scsi1 : ahci
[    2.541928] scsi2 : ahci
[    2.542287] scsi3 : ahci
[    2.542483] scsi4 : ahci
[    2.542669] scsi5 : ahci
[    2.542767] ata1: SATA max UDMA/133 abar m2048@0xc4508000 port 0xc4508100 irq 41
[    2.542773] ata2: SATA max UDMA/133 abar m2048@0xc4508000 port 0xc4508180 irq 41
[    2.542775] ata3: DUMMY
[    2.542777] ata4: DUMMY
[    2.542781] ata5: SATA max UDMA/133 abar m2048@0xc4508000 port 0xc4508300 irq 41
[    2.542785] ata6: SATA max UDMA/133 abar m2048@0xc4508000 port 0xc4508380 irq 41
[    2.814017] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    2.860641] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.860742] ata6: SATA link down (SStatus 0 SControl 300)
[    2.860797] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.860850] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.862827] ata2.00: ATAPI: hp BD-ROM BC-5501H, 2.90, max UDMA/100
[    2.865129] ata2.00: configured for UDMA/100
[    2.869286] ata1.00: ATA-8: Corsair CSSD-F60GB2, 2.0, max UDMA/133
[    2.869291] ata1.00: 117231408 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[    2.879218] ata1.00: configured for UDMA/133
[    2.879560] scsi 0:0:0:0: Direct-Access     ATA      Corsair CSSD-F60 2.0  PQ: 0 ANSI: 5
[    2.880519] scsi 1:0:0:0: CD-ROM            hp       BD ROM BC-5501H  2.90 PQ: 0 ANSI: 5
[    2.938101] hub 1-1:1.0: USB hub found
[    2.938291] hub 1-1:1.0: 6 ports detected
[    2.987210] tsc: Refined TSC clocksource calibration: 2527.285 MHz
[    3.043917] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    3.168227] hub 2-1:1.0: USB hub found
[    3.168428] hub 2-1:1.0: 8 ports detected
[    3.237325] usb 1-1.1: new low-speed USB device number 3 using ehci-pci
[    3.271147] ata5.00: ATA-8: TOSHIBA MK5075GSX, GT001U, max UDMA/100
[    3.271153] ata5.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    3.272317] ata5.00: configured for UDMA/100
[    3.272479] scsi 4:0:0:0: Direct-Access     ATA      TOSHIBA MK5075GS GT00 PQ: 0 ANSI: 5
[    3.278164] sd 4:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[    3.278175] sd 4:0:0:0: [sdb] 4096-byte physical blocks
[    3.278183] sd 0:0:0:0: [sda] 117231408 512-byte logical blocks: (60.0 GB/55.8 GiB)
[    3.278254] sd 4:0:0:0: [sdb] Write Protect is off
[    3.278257] sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    3.278279] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.278305] sd 0:0:0:0: [sda] Write Protect is off
[    3.278308] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    3.278339] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.278958]  sda: sda1 sda2 sda3 sda4
[    3.279917] sd 0:0:0:0: [sda] Attached SCSI disk
[    3.280186] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    3.280189] cdrom: Uniform CD-ROM driver Revision: 3.20
[    3.280377] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    3.329914] hidraw: raw HID events driver (C) Jiri Kosina
[    3.331516]  sdb: sdb1 sdb3
[    3.332219] sd 4:0:0:0: [sdb] Attached SCSI disk
[    3.333093] usbcore: registered new interface driver usbhid
[    3.333098] usbhid: USB HID core driver
[    3.333722] input: Microsoft  Microsoft Basic Optical Mouse v2.0  as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/input/input2
[    3.333910] hid-generic 0003:045E:00CB.0001: input,hidraw0: USB HID v1.11 Mouse [Microsoft  Microsoft Basic Optical Mouse v2.0 ] on usb-0000:00:1a.0-1.1/input0
[    3.393882] usb 1-1.6: new full-speed USB device number 4 using ehci-pci
[    3.560344] usb 2-1.1: new high-speed USB device number 3 using ehci-pci
[    3.647772] usb-storage 2-1.1:1.0: USB Mass Storage device detected
[    3.648008] scsi6 : usb-storage 2-1.1:1.0
[    3.648145] usbcore: registered new interface driver usb-storage
[    3.723699] usb 2-1.3: new full-speed USB device number 4 using ehci-pci
[    3.857415] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
[    3.886836] usb 2-1.5: new high-speed USB device number 5 using ehci-pci
[    3.917134] systemd[1]: systemd 208 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
[    3.918716] systemd[1]: Set hostname to <HP-DV7>.
[    3.921854] systemd-fstab-generator[120]: Mount point swap is not a valid path, ignoring.
[    3.967962] systemd[1]: Cannot add dependency job for unit atieventsd.service, ignoring: Unit acpid.socket failed to load: No such file or directory.
[    3.967972] systemd[1]: Cannot add dependency job for unit catalyst-hook.service, ignoring: Unit catalyst-hook.service failed to load: No such file or directory.
[    3.968182] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[    3.968242] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    3.968255] systemd[1]: Starting Login Prompts.
[    3.968267] systemd[1]: Reached target Login Prompts.
[    3.968275] systemd[1]: Starting Remote File Systems.
[    3.968284] systemd[1]: Reached target Remote File Systems.
[    3.968293] systemd[1]: Starting Device-mapper event daemon FIFOs.
[    3.968321] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[    3.968330] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[    3.968346] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    3.968354] systemd[1]: Starting Delayed Shutdown Socket.
[    3.968378] systemd[1]: Listening on Delayed Shutdown Socket.
[    3.968386] systemd[1]: Starting LVM2 metadata daemon socket.
[    3.968407] systemd[1]: Listening on LVM2 metadata daemon socket.
[    3.968436] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[    3.968528] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    3.968541] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[    3.968569] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    3.968578] systemd[1]: Starting Paths.
[    3.968587] systemd[1]: Reached target Paths.
[    3.968599] systemd[1]: Starting udev Kernel Socket.
[    3.968619] systemd[1]: Listening on udev Kernel Socket.
[    3.968629] systemd[1]: Starting udev Control Socket.
[    3.968648] systemd[1]: Listening on udev Control Socket.
[    3.968658] systemd[1]: Starting Journal Socket.
[    3.968696] systemd[1]: Listening on Journal Socket.
[    3.968710] systemd[1]: Starting udev Coldplug all Devices...
[    3.969559] systemd[1]: Starting Apply Kernel Variables...
[    3.969824] systemd[1]: Mounting Huge Pages File System...
[    3.970128] systemd[1]: Mounting POSIX Message Queue File System...
[    3.971799] systemd[1]: Starting Load Kernel Modules...
[    3.975182] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[    3.977108] systemd[1]: Started Set Up Additional Binary Formats.
[    3.977131] systemd[1]: Starting Journal Service...
[    3.977533] systemd[1]: Started Journal Service.
[    3.986760] Switched to clocksource tsc
[    3.991116] systemd-journald[133]: Vacuuming done, freed 0 bytes
[    3.993774] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
[    3.993781] ACPI: Power Button [PWRB]
[    3.993822] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input4
[    3.994178] ACPI: Lid Switch [LID0]
[    3.994307] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[    3.994316] ACPI: Power Button [PWRF]
[    3.995377] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com>
[    3.995379] AMD IOMMUv2 functionality not available on this system
[    4.030517] EXT4-fs (sda4): re-mounted. Opts: discard
[    4.049845] systemd-udevd[157]: starting version 208
[    4.055185] systemd-journald[133]: Received request to flush runtime journal from PID 1
[    4.078092] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[    4.078100] Disabling lock debugging due to kernel taint
[    4.083769] fglrx: disagrees about version of symbol pci_unregister_driver
[    4.083775] fglrx: Unknown symbol pci_unregister_driver (err -22)
[    4.084201] fglrx: disagrees about version of symbol __pci_register_driver
[    4.084204] fglrx: Unknown symbol __pci_register_driver (err -22)
[    4.104572] systemd-journald[133]: Vacuuming done, freed 4198400 bytes
[    4.104630] systemd-journald[133]: Vacuuming done, freed 0 bytes
[    4.144045] ACPI: Requesting acpi_cpufreq
[    4.145498] intel ips 0000:00:1f.6: CPU TDP doesn't match expected value (found 25, expected 29)
[    4.145667] intel ips 0000:00:1f.6: failed to get i915 symbols, graphics turbo disabled until i915 loads
[    4.147291] intel ips 0000:00:1f.6: IPS driver initialized, MCP temp limit 90
[    4.147374] agpgart-intel 0000:00:00.0: Intel HD Graphics Chipset
[    4.147433] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[    4.148117] agpgart-intel 0000:00:00.0: detected 32768K stolen memory
[    4.148312] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xb0000000
[    4.148888] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20130725/utaddress-251)
[    4.148895] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    4.148900] ACPI Warning: 0x0000000000000540-0x000000000000054f SystemIO conflicts with Region \GPIO 1 (20130725/utaddress-251)
[    4.148904] ACPI Warning: 0x0000000000000540-0x000000000000054f SystemIO conflicts with Region \SGGP 2 (20130725/utaddress-251)
[    4.148908] ACPI Warning: 0x0000000000000540-0x000000000000054f SystemIO conflicts with Region \_SB_.PCI0.P0P3.PEGP.GPIO 3 (20130725/utaddress-251)
[    4.148911] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    4.148913] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIO 1 (20130725/utaddress-251)
[    4.148916] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \SGGP 2 (20130725/utaddress-251)
[    4.148920] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \_SB_.PCI0.P0P3.PEGP.GPIO 3 (20130725/utaddress-251)
[    4.148923] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    4.148925] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 1 (20130725/utaddress-251)
[    4.148928] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \SGGP 2 (20130725/utaddress-251)
[    4.148932] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \_SB_.PCI0.P0P3.PEGP.GPIO 3 (20130725/utaddress-251)
[    4.148936] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    4.148938] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    4.150666] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    4.154438] mei_me 0000:00:16.0: setting latency timer to 64
[    4.154497] mei_me 0000:00:16.0: irq 42 for MSI/MSI-X
[    4.159382] ACPI Warning: 0x0000000000005000-0x000000000000501f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20130725/utaddress-251)
[    4.159391] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    4.169188] [drm] Initialized drm 1.1.0 20060810
[    4.173849] cfg80211: Calling CRDA to update world regulatory domain
[    4.189351] hp_accel: hardware type DV7 found
[    4.190025] lis3lv02d: 8 bits sensor found
[    4.198096] [Firmware Bug]: Invalid critical threshold (0)
[    4.201754] thermal LNXTHERM:00: registered as thermal_zone0
[    4.201759] ACPI: Thermal Zone [TZ01] (59 C)
[    4.209844] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    4.209862] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[    4.209870] pcieport 0000:00:1c.1: driver skip pci_set_master, fix it!
[    4.210169] r8169 0000:03:00.0: irq 43 for MSI/MSI-X
[    4.210403] r8169 0000:03:00.0 eth0: RTL8168d/8111d at 0xffffc90008efe000, 78:ac:c0:41:2a:dc, XID 083000c0 IRQ 43
[    4.210407] r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    4.212117] Intel(R) Wireless WiFi driver for Linux, in-tree:
[    4.212121] Copyright(c) 2003-2013 Intel Corporation
[    4.212189] pcieport 0000:00:1c.0: driver skip pci_set_master, fix it!
[    4.212290] iwlwifi 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
[    4.212425] iwlwifi 0000:02:00.0: irq 44 for MSI/MSI-X
[    4.217187] Bluetooth: Core ver 2.16
[    4.217214] NET: Registered protocol family 31
[    4.217216] Bluetooth: HCI device and connection manager initialized
[    4.217227] Bluetooth: HCI socket layer initialized
[    4.217230] Bluetooth: L2CAP socket layer initialized
[    4.217237] Bluetooth: SCO socket layer initialized
[    4.221541] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X
[    4.222747] iwlwifi 0000:02:00.0: loaded firmware version 39.31.5.1 build 35138 op_mode iwldvm
[    4.226680] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input6
[    4.232960] usbcore: registered new interface driver btusb
[    4.244566] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input7
[    4.260274] input: PC Speaker as /devices/platform/pcspkr/input/input8
[    4.262656] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUG disabled
[    4.262663] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUGFS disabled
[    4.262666] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled
[    4.262669] iwlwifi 0000:02:00.0: Detected Intel(R) Centrino(R) Wireless-N 1000 BGN, REV=0x6C
[    4.262824] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
[    4.263736] input: HDA Intel MID Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[    4.268116] input: HDA Intel MID Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[    4.270860] [drm] Memory usable by graphics device = 2048M
[    4.270866] checking generic (b0000000 580000) vs hw (b0000000 10000000)
[    4.270869] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
[    4.270890] Console: switching to colour dummy device 80x25
[    4.271002] i915 0000:00:02.0: setting latency timer to 64
[    4.277872] hda-intel 0000:01:00.1: Handle VGA-switcheroo audio client
[    4.277954] snd_hda_intel 0000:01:00.1: irq 46 for MSI/MSI-X
[    4.291480] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input11
[    4.300598] microcode: CPU0 sig=0x20655, pf=0x10, revision=0x2
[    4.306815] i915 0000:00:02.0: irq 47 for MSI/MSI-X
[    4.306827] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[    4.306828] [drm] Driver supports precise vblank timestamp query.
[    4.306984] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=none:owns=none
[    4.308799] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[    4.312321] fglrx: disagrees about version of symbol pci_unregister_driver
[    4.312328] fglrx: Unknown symbol pci_unregister_driver (err -22)
[    4.312827] fglrx: disagrees about version of symbol __pci_register_driver
[    4.312830] fglrx: Unknown symbol __pci_register_driver (err -22)
[    4.339690] iTCO_vendor_support: vendor-support=0
[    4.340684] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
[    4.340730] iTCO_wdt: Found a HM55 TCO device (Version=2, TCOBASE=0x0460)
[    4.340882] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    4.345291] fbcon: inteldrmfb (fb0) is primary device
[    4.345501] systemd-udevd[182]: renamed network interface eth0 to enp3s0
[    4.359423] cfg80211: World regulatory domain updated:
[    4.359425] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[    4.359426] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[    4.359427] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[    4.359428] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm)
[    4.359428] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm)
[    4.359429] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm)
[    4.359430] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)
[    4.363468] ACPI: Battery Slot [BAT0] (battery present)
[    4.363566] media: Linux media interface: v0.10
[    4.367460] microcode: CPU1 sig=0x20655, pf=0x10, revision=0x2
[    4.370565] Linux video capture interface: v2.00
[    4.372854] microcode: CPU2 sig=0x20655, pf=0x10, revision=0x2
[    4.373485] microcode: CPU3 sig=0x20655, pf=0x10, revision=0x2
[    4.373942] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    4.400953] systemd-udevd[185]: renamed network interface wlan0 to wlo1
[    4.412646] uvcvideo: Found UVC 1.00 device HP Webcam (064e:f209)
[    4.417049] kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround
[    4.419655] input: HP Webcam as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/input/input13
[    4.419735] usbcore: registered new interface driver uvcvideo
[    4.419735] USB Video Class driver (1.1.1)
[    4.464269] ACPI: AC Adapter [ACAD] (on-line)
[    4.464639] wmi: Mapper loaded
[    4.519224] input: HP WMI hotkeys as /devices/virtual/input/input14
[    4.650406] scsi 6:0:0:0: Direct-Access     SanDisk  Cruzer Glide     1.26 PQ: 0 ANSI: 5
[    4.651371] sd 6:0:0:0: [sdc] 31266816 512-byte logical blocks: (16.0 GB/14.9 GiB)
[    4.652731] sd 6:0:0:0: [sdc] Write Protect is off
[    4.652733] sd 6:0:0:0: [sdc] Mode Sense: 43 00 00 00
[    4.653729] sd 6:0:0:0: [sdc] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[    4.659138]  sdc: sdc1
[    4.663115] sd 6:0:0:0: [sdc] Attached SCSI removable disk
[    5.093035] Console: switching to colour frame buffer device 200x56
[    5.101023] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    5.101026] i915 0000:00:02.0: registered panic notifier
[    5.106726] acpi device:02: registered as cooling_device5
[    5.106900] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    5.106969] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input15
[    5.116370] acpi device:14: registered as cooling_device6
[    5.120307] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
[    5.127817] iwlwifi 0000:02:00.0: Radio type=0x0-0x0-0x3
[    5.131918] acpi device:15: registered as cooling_device7
[    5.131968] ACPI: Video Device [VGA1] (multi-head: yes  rom: no  post: no)
[    5.132021] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:11/LNXVIDEO:02/input/input16
[    5.132261] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[    5.163057] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
[    5.170600] iwlwifi 0000:02:00.0: Radio type=0x0-0x0-0x3
[    5.203056] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
[    5.260830] r8169 0000:03:00.0 enp3s0: link down
[    5.260877] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[    5.355261] fglrx: disagrees about version of symbol pci_unregister_driver
[    5.355269] fglrx: Unknown symbol pci_unregister_driver (err -22)
[    5.355732] fglrx: disagrees about version of symbol __pci_register_driver
[    5.355734] fglrx: Unknown symbol __pci_register_driver (err -22)
[    5.438456] fglrx: disagrees about version of symbol pci_unregister_driver
[    5.438463] fglrx: Unknown symbol pci_unregister_driver (err -22)
[    5.438930] fglrx: disagrees about version of symbol __pci_register_driver
[    5.438932] fglrx: Unknown symbol __pci_register_driver (err -22)
[    5.728249] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.4, id: 0x1e0b1, caps: 0xd04773/0xe40000/0x5a0400, board id: 3655, fw id: 631163
[    5.818594] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input12
[    6.127525] wlo1: authenticate with 04:a1:51:18:3f:5a
[    6.133892] wlo1: send auth to 04:a1:51:18:3f:5a (try 1/3)
[    6.136680] wlo1: authenticated
[    6.139097] wlo1: associate with 04:a1:51:18:3f:5a (try 1/3)
[    6.142857] wlo1: RX AssocResp from 04:a1:51:18:3f:5a (capab=0x411 status=0 aid=1)
[    6.145619] wlo1: associated
[    6.145660] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready
[    9.344429] intel ips 0000:00:1f.6: i915 driver attached, reenabling gpu turbo
[   10.652381] fglrx: disagrees about version of symbol pci_unregister_driver
[   10.652389] fglrx: Unknown symbol pci_unregister_driver (err -22)
[   10.652856] fglrx: disagrees about version of symbol __pci_register_driver
[   10.652857] fglrx: Unknown symbol __pci_register_driver (err -22)
[   10.738786] fglrx: disagrees about version of symbol pci_unregister_driver
[   10.738793] fglrx: Unknown symbol pci_unregister_driver (err -22)
[   10.739262] fglrx: disagrees about version of symbol __pci_register_driver
[   10.739264] fglrx: Unknown symbol __pci_register_driver (err -22)
[   15.956847] fglrx: disagrees about version of symbol pci_unregister_driver
[   15.956854] fglrx: Unknown symbol pci_unregister_driver (err -22)
[   15.957323] fglrx: disagrees about version of symbol __pci_register_driver
[   15.957325] fglrx: Unknown symbol __pci_register_driver (err -22)
[   16.043790] fglrx: disagrees about version of symbol pci_unregister_driver
[   16.043799] fglrx: Unknown symbol pci_unregister_driver (err -22)
[   16.044264] fglrx: disagrees about version of symbol __pci_register_driver
[   16.044265] fglrx: Unknown symbol __pci_register_driver (err -22)
[   21.269073] fglrx: disagrees about version of symbol pci_unregister_driver
[   21.269079] fglrx: Unknown symbol pci_unregister_driver (err -22)
[   21.269549] fglrx: disagrees about version of symbol __pci_register_driver
[   21.269550] fglrx: Unknown symbol __pci_register_driver (err -22)
[   21.354027] fglrx: disagrees about version of symbol pci_unregister_driver
[   21.354035] fglrx: Unknown symbol pci_unregister_driver (err -22)
[   21.354503] fglrx: disagrees about version of symbol __pci_register_driver
[   21.354505] fglrx: Unknown symbol __pci_register_driver (err -22)
[   26.581525] fglrx: disagrees about version of symbol pci_unregister_driver
[   26.581534] fglrx: Unknown symbol pci_unregister_driver (err -22)
[   26.581998] fglrx: disagrees about version of symbol __pci_register_driver
[   26.581999] fglrx: Unknown symbol __pci_register_driver (err -22)
[   26.668418] fglrx: disagrees about version of symbol pci_unregister_driver
[   26.668426] fglrx: Unknown symbol pci_unregister_driver (err -22)
[   26.668894] fglrx: disagrees about version of symbol __pci_register_driver
[   26.668896] fglrx: Unknown symbol __pci_register_driver (err -22)
[   31.890272] fglrx: disagrees about version of symbol pci_unregister_driver
[   31.890280] fglrx: Unknown symbol pci_unregister_driver (err -22)
[   31.890800] fglrx: disagrees about version of symbol __pci_register_driver
[   31.890803] fglrx: Unknown symbol __pci_register_driver (err -22)
[   31.976834] fglrx: disagrees about version of symbol pci_unregister_driver
[   31.976843] fglrx: Unknown symbol pci_unregister_driver (err -22)
[   31.977347] fglrx: disagrees about version of symbol __pci_register_driver
[   31.977350] fglrx: Unknown symbol __pci_register_driver (err -22)
[   37.198681] fglrx: disagrees about version of symbol pci_unregister_driver
[   37.198690] fglrx: Unknown symbol pci_unregister_driver (err -22)
[   37.199201] fglrx: disagrees about version of symbol __pci_register_driver
[   37.199203] fglrx: Unknown symbol __pci_register_driver (err -22)
[   37.283750] fglrx: disagrees about version of symbol pci_unregister_driver
[   37.283758] fglrx: Unknown symbol pci_unregister_driver (err -22)
[   37.284224] fglrx: disagrees about version of symbol __pci_register_driver
[   37.284226] fglrx: Unknown symbol __pci_register_driver (err -22)
[   42.501252] fglrx: disagrees about version of symbol pci_unregister_driver
[   42.501259] fglrx: Unknown symbol pci_unregister_driver (err -22)
[   42.501730] fglrx: disagrees about version of symbol __pci_register_driver
[   42.501731] fglrx: Unknown symbol __pci_register_driver (err -22)
[   42.590747] fglrx: disagrees about version of symbol pci_unregister_driver
[   42.590756] fglrx: Unknown symbol pci_unregister_driver (err -22)
[   42.591270] fglrx: disagrees about version of symbol __pci_register_driver
[   42.591272] fglrx: Unknown symbol __pci_register_driver (err -22)
[   47.337979] fuse init (API version 7.22)
[   47.817855] fglrx: disagrees about version of symbol pci_unregister_driver
[   47.817863] fglrx: Unknown symbol pci_unregister_driver (err -22)
[   47.818334] fglrx: disagrees about version of symbol __pci_register_driver
[   47.818336] fglrx: Unknown symbol __pci_register_driver (err -22)
[   47.902377] fglrx: disagrees about version of symbol pci_unregister_driver
[   47.902386] fglrx: Unknown symbol pci_unregister_driver (err -22)
[   47.902857] fglrx: disagrees about version of symbol __pci_register_driver
[   47.902859] fglrx: Unknown symbol __pci_register_driver (err -22)
[   53.118104] fglrx: disagrees about version of symbol pci_unregister_driver
[   53.118111] fglrx: Unknown symbol pci_unregister_driver (err -22)
[   53.118578] fglrx: disagrees about version of symbol __pci_register_driver
[   53.118580] fglrx: Unknown symbol __pci_register_driver (err -22)
[   53.201074] fglrx: disagrees about version of symbol pci_unregister_driver
[   53.201081] fglrx: Unknown symbol pci_unregister_driver (err -22)
[   53.201551] fglrx: disagrees about version of symbol __pci_register_driver
[   53.201553] fglrx: Unknown symbol __pci_register_driver (err -22)
[   58.420116] fglrx: disagrees about version of symbol pci_unregister_driver
[   58.420124] fglrx: Unknown symbol pci_unregister_driver (err -22)
[   58.420595] fglrx: disagrees about version of symbol __pci_register_driver
[   58.420596] fglrx: Unknown symbol __pci_register_driver (err -22)
[   58.510872] fglrx: disagrees about version of symbol pci_unregister_driver
[   58.510880] fglrx: Unknown symbol pci_unregister_driver (err -22)
[   58.511349] fglrx: disagrees about version of symbol __pci_register_driver
[   58.511350] fglrx: Unknown symbol __pci_register_driver (err -22)
[   62.023596] Corrupted low memory at ffff880000006598 (6598 phys) = 100000000000
[   62.023672] ------------[ cut here ]------------
[   62.023682] WARNING: CPU: 0 PID: 45 at arch/x86/kernel/check.c:140 check_for_bios_corruption+0x10f/0x120()
[   62.023684] Memory corruption detected in low memory
[   62.023726] Modules linked in: fuse hp_wmi sparse_keymap joydev intel_powerclamp coretemp kvm_intel uvcvideo kvm crc32c_intel videobuf2_vmalloc videobuf2_memops videobuf2_core videodev media iTCO_wdt iTCO_vendor_support microcode arc4 snd_hda_codec_hdmi psmouse serio_raw iwldvm pcspkr mac80211 snd_hda_codec_idt i915 btusb snd_hda_intel bluetooth iwlwifi r8169 snd_hda_codec snd_hwdep wmi mii snd_pcm thermal hp_accel drm_kms_helper snd_page_alloc lis3lv02d snd_timer input_polldev cfg80211 drm video snd rfkill ac battery i2c_algo_bit i2c_i801 mei_me soundcore acpi_cpufreq mei i2c_core lpc_ich intel_agp shpchp intel_gtt intel_ips processor evdev amd_iommu_v2 button ext4 crc16 mbcache jbd2 usb_storage hid_generic usbhid hid sr_mod cdrom sd_mod ahci libahci libata ehci_pci ehci_hcd scsi_mod usbcore usb_common

[   62.023809] CPU: 0 PID: 45 Comm: kworker/0:2 Tainted: P           O 3.12.6-1-ARCH #1
[   62.023812] Hardware name: Hewlett-Packard HP Pavilion dv7 Notebook PC/144B, BIOS F.29 11/07/2011
[   62.023816] Workqueue: events check_corruption
[   62.023819]  0000000000000009 ffff88024f0b5d30 ffffffff814ee4fb ffff88024f0b5d78
[   62.023823]  ffff88024f0b5d68 ffffffff81062bcd 0000000000000000 ffff880000010000
[   62.023827]  ffffffff81a28c50 0000000000000001 ffff880000000000 ffff88024f0b5dc8
[   62.023831] Call Trace:
[   62.023840]  [<ffffffff814ee4fb>] dump_stack+0x54/0x8d
[   62.023848]  [<ffffffff81062bcd>] warn_slowpath_common+0x7d/0xa0
[   62.023852]  [<ffffffff81062c3c>] warn_slowpath_fmt+0x4c/0x50
[   62.023856]  [<ffffffff8105046f>] check_for_bios_corruption+0x10f/0x120
[   62.023860]  [<ffffffff8105048e>] check_corruption+0xe/0x40
[   62.023865]  [<ffffffff8107dbc7>] process_one_work+0x167/0x450
[   62.023869]  [<ffffffff8107e5d1>] worker_thread+0x121/0x3a0
[   62.023873]  [<ffffffff8107e4b0>] ? manage_workers.isra.23+0x2b0/0x2b0
[   62.023878]  [<ffffffff81084fe0>] kthread+0xc0/0xd0
[   62.023883]  [<ffffffff81084f20>] ? kthread_create_on_node+0x120/0x120
[   62.023887]  [<ffffffff814fcffc>] ret_from_fork+0x7c/0xb0
[   62.023891]  [<ffffffff81084f20>] ? kthread_create_on_node+0x120/0x120
[   62.023894] ---[ end trace e9d54672bb30ec6c ]---
[   63.732504] fglrx: disagrees about version of symbol pci_unregister_driver
[   63.732511] fglrx: Unknown symbol pci_unregister_driver (err -22)
[   63.733019] fglrx: disagrees about version of symbol __pci_register_driver
[   63.733022] fglrx: Unknown symbol __pci_register_driver (err -22)
[   63.815299] fglrx: disagrees about version of symbol pci_unregister_driver
[   63.815307] fglrx: Unknown symbol pci_unregister_driver (err -22)
[   63.815772] fglrx: disagrees about version of symbol __pci_register_driver
[   63.815774] fglrx: Unknown symbol __pci_register_driver (err -22)
[   69.036051] fglrx: disagrees about version of symbol pci_unregister_driver
[   69.036059] fglrx: Unknown symbol pci_unregister_driver (err -22)
[   69.036530] fglrx: disagrees about version of symbol __pci_register_driver
[   69.036531] fglrx: Unknown symbol __pci_register_driver (err -22)
[   69.122110] fglrx: disagrees about version of symbol pci_unregister_driver
[   69.122118] fglrx: Unknown symbol pci_unregister_driver (err -22)
[   69.122588] fglrx: disagrees about version of symbol __pci_register_driver
[   69.122590] fglrx: Unknown symbol __pci_register_driver (err -22)
[   74.343930] fglrx: disagrees about version of symbol pci_unregister_driver
[   74.343938] fglrx: Unknown symbol pci_unregister_driver (err -22)
[   74.344437] fglrx: disagrees about version of symbol __pci_register_driver
[   74.344439] fglrx: Unknown symbol __pci_register_driver (err -22)
[   74.429342] fglrx: disagrees about version of symbol pci_unregister_driver
[   74.429351] fglrx: Unknown symbol pci_unregister_driver (err -22)
[   74.429820] fglrx: disagrees about version of symbol __pci_register_driver
[   74.429822] fglrx: Unknown symbol __pci_register_driver (err -22)
[   79.650311] fglrx: disagrees about version of symbol pci_unregister_driver
[   79.650318] fglrx: Unknown symbol pci_unregister_driver (err -22)
[   79.650784] fglrx: disagrees about version of symbol __pci_register_driver
[   79.650786] fglrx: Unknown symbol __pci_register_driver (err -22)
[   79.740890] fglrx: disagrees about version of symbol pci_unregister_driver
[   79.740899] fglrx: Unknown symbol pci_unregister_driver (err -22)
[   79.741371] fglrx: disagrees about version of symbol __pci_register_driver
[   79.741373] fglrx: Unknown symbol __pci_register_driver (err -22)
[   84.958536] fglrx: disagrees about version of symbol pci_unregister_driver
[   84.958543] fglrx: Unknown symbol pci_unregister_driver (err -22)
[   84.959012] fglrx: disagrees about version of symbol __pci_register_driver
[   84.959014] fglrx: Unknown symbol __pci_register_driver (err -22)
[   85.049150] fglrx: disagrees about version of symbol pci_unregister_driver
[   85.049158] fglrx: Unknown symbol pci_unregister_driver (err -22)
[   85.049630] fglrx: disagrees about version of symbol __pci_register_driver
[   85.049661] fglrx: Unknown symbol __pci_register_driver (err -22)

Here is the Xorg.0.log file:

[     3.667] 
X.Org X Server 1.14.5
Release Date: 2013-12-12
[     3.667] X Protocol Version 11, Revision 0
[     3.667] Build Operating System: Linux 3.12.5-1-ARCH x86_64 
[     3.667] Current Operating System: Linux HP-DV7 3.12.6-1-ARCH #1 SMP PREEMPT Fri Dec 20 19:39:00 CET 2013 x86_64
[     3.667] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=a303086c-e564-4347-92f1-8ec5ecbdcf85 ro quiet
[     3.667] Build Date: 13 December 2013  03:11:42PM
[     3.667]  
[     3.667] Current version of pixman: 0.32.4
[     3.668] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[     3.668] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[     3.668] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Jan  6 13:58:47 2014
[     3.670] (==) Using config file: "/etc/X11/xorg.conf"
[     3.670] (==) Using config directory: "/etc/X11/xorg.conf.d"
[     3.675] (==) No Layout section.  Using the first Screen section.
[     3.675] (==) No screen section available. Using defaults.
[     3.675] (**) |-->Screen "Default Screen Section" (0)
[     3.675] (**) |   |-->Monitor "<default monitor>"
[     3.676] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[     3.676] (==) Automatically adding devices
[     3.676] (==) Automatically enabling devices
[     3.676] (==) Automatically adding GPU devices
[     3.681] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[     3.681] 	Entry deleted from font path.
[     3.685] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[     3.685] 	Entry deleted from font path.
[     3.685] 	(Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[     3.685] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[     3.685] 	Entry deleted from font path.
[     3.685] 	(Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[     3.685] (==) FontPath set to:
	/usr/share/fonts/misc/,
	/usr/share/fonts/TTF/,
	/usr/share/fonts/Type1/
[     3.685] (==) ModulePath set to "/usr/lib/xorg/modules"
[     3.685] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[     3.685] (II) Loader magic: 0x7fec20
[     3.685] (II) Module ABI versions:
[     3.685] 	X.Org ANSI C Emulation: 0.4
[     3.685] 	X.Org Video Driver: 14.1
[     3.685] 	X.Org XInput driver : 19.1
[     3.685] 	X.Org Server Extension : 7.0
[     3.686] (II) xfree86: Adding drm device (/dev/dri/card0)
[     4.524] (--) PCI:*(0:0:2:0) 8086:0046:103c:144b rev 2, Mem @ 0xc0000000/4194304, 0xb0000000/268435456, I/O @ 0x00005050/8
[     4.524] (--) PCI: (0:1:0:0) 1002:68c1:103c:144b rev 0, Mem @ 0xa0000000/268435456, 0xc4400000/131072, I/O @ 0x00004000/256, BIOS @ 0x????????/131072
[     4.524] Initializing built-in extension Generic Event Extension
[     4.524] Initializing built-in extension SHAPE
[     4.524] Initializing built-in extension MIT-SHM
[     4.524] Initializing built-in extension XInputExtension
[     4.524] Initializing built-in extension XTEST
[     4.524] Initializing built-in extension BIG-REQUESTS
[     4.524] Initializing built-in extension SYNC
[     4.525] Initializing built-in extension XKEYBOARD
[     4.525] Initializing built-in extension XC-MISC
[     4.525] Initializing built-in extension SECURITY
[     4.525] Initializing built-in extension XINERAMA
[     4.525] Initializing built-in extension XFIXES
[     4.525] Initializing built-in extension RENDER
[     4.525] Initializing built-in extension RANDR
[     4.525] Initializing built-in extension COMPOSITE
[     4.525] Initializing built-in extension DAMAGE
[     4.525] Initializing built-in extension MIT-SCREEN-SAVER
[     4.525] Initializing built-in extension DOUBLE-BUFFER
[     4.525] Initializing built-in extension RECORD
[     4.525] Initializing built-in extension DPMS
[     4.525] Initializing built-in extension X-Resource
[     4.525] Initializing built-in extension XVideo
[     4.525] Initializing built-in extension XVideo-MotionCompensation
[     4.525] Initializing built-in extension XFree86-VidModeExtension
[     4.525] Initializing built-in extension XFree86-DGA
[     4.525] Initializing built-in extension XFree86-DRI
[     4.525] Initializing built-in extension DRI2
[     4.525] (II) LoadModule: "glx"
[     4.527] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[     4.531] (II) Module glx: vendor="Advanced Micro Devices, Inc."
[     4.531] 	compiled for 6.9.0, module version = 1.0.0
[     4.531] Loading extension GLX
[     4.531] (==) Matched intel as autoconfigured driver 0
[     4.531] (==) Matched intel as autoconfigured driver 1
[     4.531] (==) Matched vesa as autoconfigured driver 2
[     4.531] (==) Matched modesetting as autoconfigured driver 3
[     4.531] (==) Matched fbdev as autoconfigured driver 4
[     4.531] (==) Assigned the driver to the xf86ConfigLayout
[     4.531] (II) LoadModule: "intel"
[     4.532] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[     4.536] (II) Module intel: vendor="X.Org Foundation"
[     4.536] 	compiled for 1.14.2, module version = 2.21.15
[     4.536] 	Module class: X.Org Video Driver
[     4.536] 	ABI class: X.Org Video Driver, version 14.1
[     4.536] (II) LoadModule: "vesa"
[     4.536] (WW) Warning, couldn't open module vesa
[     4.536] (II) UnloadModule: "vesa"
[     4.536] (II) Unloading vesa
[     4.536] (EE) Failed to load module "vesa" (module does not exist, 0)
[     4.536] (II) LoadModule: "modesetting"
[     4.537] (WW) Warning, couldn't open module modesetting
[     4.537] (II) UnloadModule: "modesetting"
[     4.537] (II) Unloading modesetting
[     4.537] (EE) Failed to load module "modesetting" (module does not exist, 0)
[     4.537] (II) LoadModule: "fbdev"
[     4.537] (WW) Warning, couldn't open module fbdev
[     4.537] (II) UnloadModule: "fbdev"
[     4.537] (II) Unloading fbdev
[     4.537] (EE) Failed to load module "fbdev" (module does not exist, 0)
[     4.537] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
	i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
	915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
	Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
	GM45, 4 Series, G45/G43, Q45/Q43, G41, B43, HD Graphics,
	HD Graphics 2000, HD Graphics 3000, HD Graphics 2500,
	HD Graphics 4000, HD Graphics P4000, HD Graphics 4600,
	HD Graphics 5000, HD Graphics P4600/P4700, Iris(TM) Graphics 5100,
	HD Graphics 4400, HD Graphics 4200, Iris(TM) Pro Graphics 5200
[     4.537] (++) using VT number 1

[     4.540] (II) intel(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[     4.540] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[     4.540] (==) intel(0): RGB weight 888
[     4.540] (==) intel(0): Default visual is TrueColor
[     4.540] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics
[     4.540] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2
[     4.540] (**) intel(0): Framebuffer tiled
[     4.540] (**) intel(0): Pixmaps tiled
[     4.540] (**) intel(0): "Tear free" disabled
[     4.540] (**) intel(0): Forcing per-crtc-pixmaps? no
[     4.541] (II) intel(0): Output LVDS1 has no monitor section
[     4.541] (--) intel(0): found backlight control interface acpi_video0 (type 'firmware')
[     4.541] (II) intel(0): Output VGA1 has no monitor section
[     4.541] (--) intel(0): Output LVDS1 using initial mode 1600x900 on pipe 0
[     4.541] (==) intel(0): DPI set to (96, 96)
[     4.541] (II) Loading sub module "dri2"
[     4.541] (II) LoadModule: "dri2"
[     4.541] (II) Module "dri2" already built-in
[     4.542] (==) Depth 24 pixmap format is 32 bpp
[     4.546] (II) intel(0): SNA initialized with Ironlake (gen5) backend
[     4.546] (==) intel(0): Backing store disabled
[     4.546] (==) intel(0): Silken mouse enabled
[     4.546] (II) intel(0): HW Cursor enabled
[     4.546] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[     4.548] (==) intel(0): DPMS enabled
[     4.548] (II) intel(0): [XvMC] xvmc_vld driver initialized.
[     4.548] (II) intel(0): [DRI2] Setup complete
[     4.548] (II) intel(0): [DRI2]   DRI driver: i965
[     4.548] (II) intel(0): direct rendering: DRI2 Enabled
[     4.548] (==) intel(0): hotplug detection: "enabled"
[     4.548] (--) RandR disabled
[     4.556] (EE) GLX error: Can not get required symbols.
[     4.563] (II) intel(0): switch to mode 1600x900@60.1 on pipe 0 using LVDS1, position (0, 0), rotation normal
[     4.586] (II) intel(0): Setting screen physical size to 423 x 238
[     4.653] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[     4.653] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[     4.653] (II) LoadModule: "evdev"
[     4.653] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[     4.655] (II) Module evdev: vendor="X.Org Foundation"
[     4.655] 	compiled for 1.14.3, module version = 2.8.2
[     4.655] 	Module class: X.Org XInput Driver
[     4.655] 	ABI class: X.Org XInput driver, version 19.1
[     4.655] (II) Using input driver 'evdev' for 'Power Button'
[     4.655] (**) Power Button: always reports core events
[     4.655] (**) evdev: Power Button: Device: "/dev/input/event4"
[     4.655] (--) evdev: Power Button: Vendor 0 Product 0x1
[     4.655] (--) evdev: Power Button: Found keys
[     4.655] (II) evdev: Power Button: Configuring as keyboard
[     4.655] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5/event4"
[     4.655] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[     4.655] (**) Option "xkb_rules" "evdev"
[     4.655] (**) Option "xkb_model" "pc104"
[     4.655] (**) Option "xkb_layout" "en"
[     4.676] (EE) Error loading keymap /var/lib/xkb/server-0.xkm
[     4.676] (EE) XKB: Failed to load keymap. Loading default keymap instead.
[     4.706] (II) config/udev: Adding input device Video Bus (/dev/input/event9)
[     4.706] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[     4.706] (II) Using input driver 'evdev' for 'Video Bus'
[     4.706] (**) Video Bus: always reports core events
[     4.706] (**) evdev: Video Bus: Device: "/dev/input/event9"
[     4.706] (--) evdev: Video Bus: Vendor 0 Product 0x6
[     4.706] (--) evdev: Video Bus: Found keys
[     4.706] (II) evdev: Video Bus: Configuring as keyboard
[     4.706] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input11/event9"
[     4.706] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[     4.706] (**) Option "xkb_rules" "evdev"
[     4.706] (**) Option "xkb_model" "pc104"
[     4.706] (**) Option "xkb_layout" "en"
[     4.706] (II) config/udev: Adding input device Video Bus (/dev/input/event10)
[     4.706] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[     4.706] (II) Using input driver 'evdev' for 'Video Bus'
[     4.707] (**) Video Bus: always reports core events
[     4.707] (**) evdev: Video Bus: Device: "/dev/input/event10"
[     4.707] (--) evdev: Video Bus: Vendor 0 Product 0x6
[     4.707] (--) evdev: Video Bus: Found keys
[     4.707] (II) evdev: Video Bus: Configuring as keyboard
[     4.707] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:11/LNXVIDEO:02/input/input12/event10"
[     4.707] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[     4.707] (**) Option "xkb_rules" "evdev"
[     4.707] (**) Option "xkb_model" "pc104"
[     4.707] (**) Option "xkb_layout" "en"
[     4.707] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[     4.707] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[     4.707] (II) Using input driver 'evdev' for 'Power Button'
[     4.707] (**) Power Button: always reports core events
[     4.707] (**) evdev: Power Button: Device: "/dev/input/event2"
[     4.707] (--) evdev: Power Button: Vendor 0 Product 0x1
[     4.707] (--) evdev: Power Button: Found keys
[     4.707] (II) evdev: Power Button: Configuring as keyboard
[     4.707] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3/event2"
[     4.707] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 9)
[     4.707] (**) Option "xkb_rules" "evdev"
[     4.707] (**) Option "xkb_model" "pc104"
[     4.707] (**) Option "xkb_layout" "en"
[     4.707] (II) config/udev: Adding input device Lid Switch (/dev/input/event3)
[     4.707] (II) No input driver specified, ignoring this device.
[     4.707] (II) This device may have been added with another device file.
[     4.708] (II) config/udev: Adding input device HD-Audio Generic HDMI/DP,pcm=3 (/dev/input/event14)
[     4.708] (II) No input driver specified, ignoring this device.
[     4.708] (II) This device may have been added with another device file.
[     4.708] (II) config/udev: Adding drm device (/dev/dri/card0)
[     4.708] (II) config/udev: Adding input device Microsoft  Microsoft Basic Optical Mouse v2.0  (/dev/input/event1)
[     4.708] (**) Microsoft  Microsoft Basic Optical Mouse v2.0 : Applying InputClass "evdev pointer catchall"
[     4.708] (II) Using input driver 'evdev' for 'Microsoft  Microsoft Basic Optical Mouse v2.0 '
[     4.708] (**) Microsoft  Microsoft Basic Optical Mouse v2.0 : always reports core events
[     4.708] (**) evdev: Microsoft  Microsoft Basic Optical Mouse v2.0 : Device: "/dev/input/event1"
[     4.708] (--) evdev: Microsoft  Microsoft Basic Optical Mouse v2.0 : Vendor 0x45e Product 0xcb
[     4.708] (--) evdev: Microsoft  Microsoft Basic Optical Mouse v2.0 : Found 3 mouse buttons
[     4.708] (--) evdev: Microsoft  Microsoft Basic Optical Mouse v2.0 : Found scroll wheel(s)
[     4.708] (--) evdev: Microsoft  Microsoft Basic Optical Mouse v2.0 : Found relative axes
[     4.708] (--) evdev: Microsoft  Microsoft Basic Optical Mouse v2.0 : Found x and y relative axes
[     4.708] (II) evdev: Microsoft  Microsoft Basic Optical Mouse v2.0 : Configuring as mouse
[     4.708] (II) evdev: Microsoft  Microsoft Basic Optical Mouse v2.0 : Adding scrollwheel support
[     4.708] (**) evdev: Microsoft  Microsoft Basic Optical Mouse v2.0 : YAxisMapping: buttons 4 and 5
[     4.708] (**) evdev: Microsoft  Microsoft Basic Optical Mouse v2.0 : EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[     4.708] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/input/input2/event1"
[     4.708] (II) XINPUT: Adding extended input device "Microsoft  Microsoft Basic Optical Mouse v2.0 " (type: MOUSE, id 10)
[     4.708] (II) evdev: Microsoft  Microsoft Basic Optical Mouse v2.0 : initialized for relative axes.
[     4.708] (**) Microsoft  Microsoft Basic Optical Mouse v2.0 : (accel) keeping acceleration scheme 1
[     4.708] (**) Microsoft  Microsoft Basic Optical Mouse v2.0 : (accel) acceleration profile 0
[     4.708] (**) Microsoft  Microsoft Basic Optical Mouse v2.0 : (accel) acceleration factor: 2.000
[     4.709] (**) Microsoft  Microsoft Basic Optical Mouse v2.0 : (accel) acceleration threshold: 4
[     4.709] (II) config/udev: Adding input device Microsoft  Microsoft Basic Optical Mouse v2.0  (/dev/input/mouse0)
[     4.709] (II) No input driver specified, ignoring this device.
[     4.709] (II) This device may have been added with another device file.
[     4.709] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event11)
[     4.709] (II) No input driver specified, ignoring this device.
[     4.709] (II) This device may have been added with another device file.
[     4.709] (II) config/udev: Adding input device HDA Intel MID Mic (/dev/input/event13)
[     4.709] (II) No input driver specified, ignoring this device.
[     4.709] (II) This device may have been added with another device file.
[     4.709] (II) config/udev: Adding input device HDA Intel MID Front Headphone (/dev/input/event12)
[     4.709] (II) No input driver specified, ignoring this device.
[     4.709] (II) This device may have been added with another device file.
[     4.710] (II) config/udev: Adding input device HP Webcam (/dev/input/event7)
[     4.710] (**) HP Webcam: Applying InputClass "evdev keyboard catchall"
[     4.710] (II) Using input driver 'evdev' for 'HP Webcam'
[     4.710] (**) HP Webcam: always reports core events
[     4.710] (**) evdev: HP Webcam: Device: "/dev/input/event7"
[     4.710] (--) evdev: HP Webcam: Vendor 0x64e Product 0xf209
[     4.710] (--) evdev: HP Webcam: Found keys
[     4.710] (II) evdev: HP Webcam: Configuring as keyboard
[     4.710] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/input/input9/event7"
[     4.710] (II) XINPUT: Adding extended input device "HP Webcam" (type: KEYBOARD, id 11)
[     4.710] (**) Option "xkb_rules" "evdev"
[     4.710] (**) Option "xkb_model" "pc104"
[     4.710] (**) Option "xkb_layout" "en"
[     4.710] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[     4.710] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[     4.710] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[     4.710] (**) AT Translated Set 2 keyboard: always reports core events
[     4.710] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[     4.710] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[     4.710] (--) evdev: AT Translated Set 2 keyboard: Found keys
[     4.710] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[     4.710] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[     4.710] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 12)
[     4.710] (**) Option "xkb_rules" "evdev"
[     4.710] (**) Option "xkb_model" "pc104"
[     4.710] (**) Option "xkb_layout" "en"
[     4.711] (II) config/udev: Adding input device ST LIS3LV02DL Accelerometer (/dev/input/event5)
[     4.711] (II) No input driver specified, ignoring this device.
[     4.711] (II) This device may have been added with another device file.
[     4.711] (II) config/udev: Adding input device ST LIS3LV02DL Accelerometer (/dev/input/js0)
[     4.711] (II) No input driver specified, ignoring this device.
[     4.711] (II) This device may have been added with another device file.
[     4.711] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
[     4.711] (II) No input driver specified, ignoring this device.
[     4.711] (II) This device may have been added with another device file.
[     4.711] (II) config/udev: Adding input device HP WMI hotkeys (/dev/input/event8)
[     4.711] (**) HP WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[     4.711] (II) Using input driver 'evdev' for 'HP WMI hotkeys'
[     4.711] (**) HP WMI hotkeys: always reports core events
[     4.711] (**) evdev: HP WMI hotkeys: Device: "/dev/input/event8"
[     4.711] (--) evdev: HP WMI hotkeys: Vendor 0 Product 0
[     4.711] (--) evdev: HP WMI hotkeys: Found keys
[     4.711] (II) evdev: HP WMI hotkeys: Configuring as keyboard
[     4.711] (**) Option "config_info" "udev:/sys/devices/virtual/input/input10/event8"
[     4.711] (II) XINPUT: Adding extended input device "HP WMI hotkeys" (type: KEYBOARD, id 13)
[     4.711] (**) Option "xkb_rules" "evdev"
[     4.711] (**) Option "xkb_model" "pc104"
[     4.711] (**) Option "xkb_layout" "en"
[     4.716] (II) config/udev: removing device Microsoft  Microsoft Basic Optical Mouse v2.0 
[     4.740] (II) evdev: Microsoft  Microsoft Basic Optical Mouse v2.0 : Close
[     4.740] (II) UnloadModule: "evdev"
[     4.740] (II) config/udev: Adding input device Microsoft  Microsoft Basic Optical Mouse v2.0  (/dev/input/event1)
[     4.740] (**) Microsoft  Microsoft Basic Optical Mouse v2.0 : Applying InputClass "evdev pointer catchall"
[     4.740] (II) Using input driver 'evdev' for 'Microsoft  Microsoft Basic Optical Mouse v2.0 '
[     4.740] (**) Microsoft  Microsoft Basic Optical Mouse v2.0 : always reports core events
[     4.740] (**) evdev: Microsoft  Microsoft Basic Optical Mouse v2.0 : Device: "/dev/input/event1"
[     4.740] (--) evdev: Microsoft  Microsoft Basic Optical Mouse v2.0 : Vendor 0x45e Product 0xcb
[     4.740] (--) evdev: Microsoft  Microsoft Basic Optical Mouse v2.0 : Found 3 mouse buttons
[     4.740] (--) evdev: Microsoft  Microsoft Basic Optical Mouse v2.0 : Found scroll wheel(s)
[     4.740] (--) evdev: Microsoft  Microsoft Basic Optical Mouse v2.0 : Found relative axes
[     4.740] (--) evdev: Microsoft  Microsoft Basic Optical Mouse v2.0 : Found x and y relative axes
[     4.740] (II) evdev: Microsoft  Microsoft Basic Optical Mouse v2.0 : Configuring as mouse
[     4.740] (II) evdev: Microsoft  Microsoft Basic Optical Mouse v2.0 : Adding scrollwheel support
[     4.740] (**) evdev: Microsoft  Microsoft Basic Optical Mouse v2.0 : YAxisMapping: buttons 4 and 5
[     4.740] (**) evdev: Microsoft  Microsoft Basic Optical Mouse v2.0 : EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[     4.740] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/input/input2/event1"
[     4.740] (II) XINPUT: Adding extended input device "Microsoft  Microsoft Basic Optical Mouse v2.0 " (type: MOUSE, id 10)
[     4.740] (II) evdev: Microsoft  Microsoft Basic Optical Mouse v2.0 : initialized for relative axes.
[     4.740] (**) Microsoft  Microsoft Basic Optical Mouse v2.0 : (accel) keeping acceleration scheme 1
[     4.740] (**) Microsoft  Microsoft Basic Optical Mouse v2.0 : (accel) acceleration profile 0
[     4.740] (**) Microsoft  Microsoft Basic Optical Mouse v2.0 : (accel) acceleration factor: 2.000
[     4.740] (**) Microsoft  Microsoft Basic Optical Mouse v2.0 : (accel) acceleration threshold: 4
[     4.741] (II) config/udev: Adding input device Lid Switch (/dev/input/event3)
[     4.741] (II) No input driver specified, ignoring this device.
[     4.741] (II) This device may have been added with another device file.
[     4.741] (II) config/udev: removing device Power Button
[     4.758] (II) evdev: Power Button: Close
[     4.758] (II) UnloadModule: "evdev"
[     4.758] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[     4.758] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[     4.758] (II) Using input driver 'evdev' for 'Power Button'
[     4.758] (**) Power Button: always reports core events
[     4.759] (**) evdev: Power Button: Device: "/dev/input/event4"
[     4.759] (--) evdev: Power Button: Vendor 0 Product 0x1
[     4.759] (--) evdev: Power Button: Found keys
[     4.759] (II) evdev: Power Button: Configuring as keyboard
[     4.759] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5/event4"
[     4.759] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[     4.759] (**) Option "xkb_rules" "evdev"
[     4.759] (**) Option "xkb_model" "pc104"
[     4.759] (**) Option "xkb_layout" "en"
[     4.759] (II) config/udev: removing device Power Button
[     4.776] (II) evdev: Power Button: Close
[     4.776] (II) UnloadModule: "evdev"
[     4.777] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[     4.777] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[     4.777] (II) Using input driver 'evdev' for 'Power Button'
[     4.777] (**) Power Button: always reports core events
[     4.777] (**) evdev: Power Button: Device: "/dev/input/event2"
[     4.777] (--) evdev: Power Button: Vendor 0 Product 0x1
[     4.777] (--) evdev: Power Button: Found keys
[     4.777] (II) evdev: Power Button: Configuring as keyboard
[     4.777] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3/event2"
[     4.777] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 9)
[     4.777] (**) Option "xkb_rules" "evdev"
[     4.777] (**) Option "xkb_model" "pc104"
[     4.777] (**) Option "xkb_layout" "en"
[     4.777] (II) config/udev: removing device AT Translated Set 2 keyboard
[     4.811] (II) evdev: AT Translated Set 2 keyboard: Close
[     4.811] (II) UnloadModule: "evdev"
[     4.811] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[     4.811] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[     4.811] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[     4.811] (**) AT Translated Set 2 keyboard: always reports core events
[     4.811] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[     4.811] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[     4.811] (--) evdev: AT Translated Set 2 keyboard: Found keys
[     4.811] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[     4.811] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[     4.811] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 12)
[     4.811] (**) Option "xkb_rules" "evdev"
[     4.811] (**) Option "xkb_model" "pc104"
[     4.811] (**) Option "xkb_layout" "en"
[     4.812] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
[     4.812] (II) No input driver specified, ignoring this device.
[     4.812] (II) This device may have been added with another device file.
[     4.812] (II) config/udev: removing device HP Webcam
[     4.853] (II) evdev: HP Webcam: Close
[     4.853] (II) UnloadModule: "evdev"
[     4.853] (II) config/udev: Adding input device HP Webcam (/dev/input/event7)
[     4.853] (**) HP Webcam: Applying InputClass "evdev keyboard catchall"
[     4.853] (II) Using input driver 'evdev' for 'HP Webcam'
[     4.853] (**) HP Webcam: always reports core events
[     4.853] (**) evdev: HP Webcam: Device: "/dev/input/event7"
[     4.853] (--) evdev: HP Webcam: Vendor 0x64e Product 0xf209
[     4.853] (--) evdev: HP Webcam: Found keys
[     4.853] (II) evdev: HP Webcam: Configuring as keyboard
[     4.853] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/input/input9/event7"
[     4.853] (II) XINPUT: Adding extended input device "HP Webcam" (type: KEYBOARD, id 11)
[     4.853] (**) Option "xkb_rules" "evdev"
[     4.853] (**) Option "xkb_model" "pc104"
[     4.853] (**) Option "xkb_layout" "en"
[     4.854] (II) config/udev: Adding input device ST LIS3LV02DL Accelerometer (/dev/input/js0)
[     4.854] (II) No input driver specified, ignoring this device.
[     4.854] (II) This device may have been added with another device file.
[     4.854] (II) config/udev: removing device HP WMI hotkeys
[     4.903] (II) evdev: HP WMI hotkeys: Close
[     4.903] (II) UnloadModule: "evdev"
[     4.903] (II) config/udev: Adding input device HP WMI hotkeys (/dev/input/event8)
[     4.903] (**) HP WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[     4.903] (II) Using input driver 'evdev' for 'HP WMI hotkeys'
[     4.903] (**) HP WMI hotkeys: always reports core events
[     4.903] (**) evdev: HP WMI hotkeys: Device: "/dev/input/event8"
[     4.903] (--) evdev: HP WMI hotkeys: Vendor 0 Product 0
[     4.903] (--) evdev: HP WMI hotkeys: Found keys
[     4.903] (II) evdev: HP WMI hotkeys: Configuring as keyboard
[     4.903] (**) Option "config_info" "udev:/sys/devices/virtual/input/input10/event8"
[     4.903] (II) XINPUT: Adding extended input device "HP WMI hotkeys" (type: KEYBOARD, id 13)
[     4.903] (**) Option "xkb_rules" "evdev"
[     4.903] (**) Option "xkb_model" "pc104"
[     4.903] (**) Option "xkb_layout" "en"
[     4.903] (II) config/udev: Adding input device ST LIS3LV02DL Accelerometer (/dev/input/event5)
[     4.904] (II) No input driver specified, ignoring this device.
[     4.904] (II) This device may have been added with another device file.
[     4.904] (II) config/udev: removing device Video Bus
[     4.930] (II) evdev: Video Bus: Close
[     4.930] (II) UnloadModule: "evdev"
[     4.930] (II) config/udev: Adding input device Video Bus (/dev/input/event9)
[     4.930] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[     4.930] (II) Using input driver 'evdev' for 'Video Bus'
[     4.930] (**) Video Bus: always reports core events
[     4.930] (**) evdev: Video Bus: Device: "/dev/input/event9"
[     4.930] (--) evdev: Video Bus: Vendor 0 Product 0x6
[     4.930] (--) evdev: Video Bus: Found keys
[     4.930] (II) evdev: Video Bus: Configuring as keyboard
[     4.930] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input11/event9"
[     4.930] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[     4.930] (**) Option "xkb_rules" "evdev"
[     4.930] (**) Option "xkb_model" "pc104"
[     4.930] (**) Option "xkb_layout" "en"
[     4.930] removing GPU device /sys/devices/pci0000:00/0000:00:02.0/drm/card0 /dev/dri/card0
[     4.930] xf86: remove device 0 /sys/devices/pci0000:00/0000:00:02.0/drm/card0
[     4.930] failed to find screen to remove
[     4.930] (II) config/udev: Adding drm device (/dev/dri/card0)
[     4.930] (II) config/udev: removing device Video Bus
[     4.953] (II) evdev: Video Bus: Close
[     4.953] (II) UnloadModule: "evdev"
[     4.953] (II) config/udev: Adding input device Video Bus (/dev/input/event10)
[     4.953] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[     4.953] (II) Using input driver 'evdev' for 'Video Bus'
[     4.953] (**) Video Bus: always reports core events
[     4.953] (**) evdev: Video Bus: Device: "/dev/input/event10"
[     4.953] (--) evdev: Video Bus: Vendor 0 Product 0x6
[     4.953] (--) evdev: Video Bus: Found keys
[     4.953] (II) evdev: Video Bus: Configuring as keyboard
[     4.953] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:11/LNXVIDEO:02/input/input12/event10"
[     4.953] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[     4.953] (**) Option "xkb_rules" "evdev"
[     4.953] (**) Option "xkb_model" "pc104"
[     4.953] (**) Option "xkb_layout" "en"
[     4.954] removing GPU device /sys/devices/pci0000:00/0000:00:02.0/drm/card0/card0-LVDS-1 (null)
[     4.954] removing GPU device /sys/devices/pci0000:00/0000:00:02.0/drm/card0/card0-VGA-1 (null)
[     4.954] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event11)
[     4.954] (II) No input driver specified, ignoring this device.
[     4.954] (II) This device may have been added with another device file.
[     4.955] (II) config/udev: Adding input device HDA Intel MID Mic (/dev/input/event13)
[     4.955] (II) No input driver specified, ignoring this device.
[     4.955] (II) This device may have been added with another device file.
[     4.955] (II) config/udev: Adding input device HDA Intel MID Front Headphone (/dev/input/event12)
[     4.955] (II) No input driver specified, ignoring this device.
[     4.955] (II) This device may have been added with another device file.
[     4.955] (II) config/udev: Adding input device HD-Audio Generic HDMI/DP,pcm=3 (/dev/input/event14)
[     4.955] (II) No input driver specified, ignoring this device.
[     4.955] (II) This device may have been added with another device file.
[     5.176] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse1)
[     5.176] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[     5.176] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event15)
[     5.176] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[     5.176] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[     5.176] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[     5.176] (II) LoadModule: "synaptics"
[     5.176] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[     5.177] (II) Module synaptics: vendor="X.Org Foundation"
[     5.177] 	compiled for 1.14.4, module version = 1.7.2
[     5.177] 	Module class: X.Org XInput Driver
[     5.177] 	ABI class: X.Org XInput driver, version 19.1
[     5.177] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[     5.177] (**) SynPS/2 Synaptics TouchPad: always reports core events
[     5.177] (**) Option "Device" "/dev/input/event15"
[     5.293] (II) synaptics: SynPS/2 Synaptics TouchPad: ignoring touch events for semi-multitouch device
[     5.293] (II) synaptics: SynPS/2 Synaptics TouchPad: found clickpad property
[     5.293] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5672 (res 46)
[     5.293] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4550 (res 61)
[     5.293] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[     5.293] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[     5.293] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left double triple
[     5.293] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[     5.293] (**) Option "TapButton1" "1"
[     5.293] (**) Option "TapButton2" "2"
[     5.293] (**) Option "TapButton3" "3"
[     5.293] (**) Option "SoftButtonAreas" "50% 0 82% 0 0 0 0 0"
[     5.293] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[     5.293] (**) SynPS/2 Synaptics TouchPad: always reports core events
[     5.333] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input8/event15"
[     5.333] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 14)
[     5.333] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[     5.333] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75
[     5.333] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.038
[     5.333] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[     5.333] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[     5.333] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[     5.333] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[     5.334] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[    12.437] (II) intel(0): EDID vendor "LGD", prod id 634
[    12.437] (II) intel(0): Printing DDC gathered Modelines:
[    12.437] (II) intel(0): Modeline "1600x900"x0.0   97.75  1600 1648 1696 1784  900 902 905 912 -hsync -vsync (54.8 kHz eP)
[    13.015] (EE) Error loading keymap /var/lib/xkb/server-0.xkm

The xorg.conf file is just the standard output from aticonfig.

Section "ServerLayout"
	Identifier     "aticonfig Layout"
	Screen      0  "aticonfig-Screen[0]-0" 0 0
EndSection

Section "Module"
EndSection

Section "Monitor"
	Identifier   "aticonfig-Monitor[0]-0"
	Option	    "VendorName" "ATI Proprietary Driver"
	Option	    "ModelName" "Generic Autodetecting Monitor"
	Option	    "DPMS" "true"
EndSection

Section "Device"
	Identifier  "aticonfig-Device[0]-0"
	Driver      "fglrx"
	BusID       "PCI:1:0:0"
EndSection

Section "Screen"
	Identifier "aticonfig-Screen[0]-0"
	Device     "aticonfig-Device[0]-0"
	Monitor    "aticonfig-Monitor[0]-0"
	DefaultDepth     24
	SubSection "Display"
		Viewport   0 0
		Depth     24
	EndSubSection
EndSection

I've blacklisted radeon, disabled the kernel mode setting, reenabled the kernel mode setting , and nothing seems to be working.
Any help would be great. Thanks.
E: Forgot to mention that using opensource xf86-video-ati drivers, the video works. Somewhat. It's very finicky and usually loaded x, but sometimes I had to restart multiple times for x to start. Don't know why that is.

Last edited by MorningWood (2014-01-26 02:10:16)

MorningWood · 2014-01-12 23:00:58

Anyone?

Lone_Wolf · 2014-01-13 15:58:13

The Xorg0.log you posted doesn't show any reference to the catalyst driver / amd card.

Are you sure you got the correct pci-id in xorg.conf , please post 'lspci -v' output .

This wiki page might help a bit, https://wiki.archlinux.org/index.php/Hybrid_graphics

Sidenote : a friend of mine has a dv7 with an amd apu + amd discrete card and that one runs fine with opensource drivers / prime .

Last edited by Lone_Wolf (2014-01-13 15:59:37)

MorningWood · 2014-01-18 19:39:24

Lone_Wolf wrote:

The Xorg0.log you posted doesn't show any reference to the catalyst driver / amd card.
Are you sure you got the correct pci-id in xorg.conf , please post 'lspci -v' output .

This wiki page might help a bit, https://wiki.archlinux.org/index.php/Hybrid_graphics
Sidenote : a friend of mine has a dv7 with an amd apu + amd discrete card and that one runs fine with opensource drivers / prime .

Sorry for the delayed response, Lone_Wolf. I haven't had access to said laptop until now.
In regards to the pci-id within xorg.conf, it appears to be correct.

The lspci -v output is:

00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 02)
	Subsystem: Hewlett-Packard Company Device 144b
	Flags: bus master, fast devsel, latency 0
	Capabilities: [e0] Vendor Specific Information: Len=0c <?>
	Kernel driver in use: agpgart-intel
	Kernel modules: intel_agp

00:01.0 PCI bridge: Intel Corporation Core Processor PCI Express x16 Root Port (rev 02) (prog-if 00 [Normal decode])
	Flags: bus master, fast devsel, latency 0
	Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
	I/O behind bridge: 00004000-00004fff
	Memory behind bridge: c4400000-c44fffff
	Prefetchable memory behind bridge: 00000000a0000000-00000000afffffff
	Capabilities: [88] Subsystem: Hewlett-Packard Company Device 144b
	Capabilities: [80] Power Management version 3
	Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit-
	Capabilities: [a0] Express Root Port (Slot+), MSI 00
	Capabilities: [100] Virtual Channel
	Kernel driver in use: pcieport
	Kernel modules: shpchp

00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 02) (prog-if 00 [VGA controller])
	Subsystem: Hewlett-Packard Company Device 144b
	Flags: bus master, fast devsel, latency 0, IRQ 47
	Memory at c0000000 (64-bit, non-prefetchable) [size=4M]
	Memory at b0000000 (64-bit, prefetchable) [size=256M]
	I/O ports at 5050 [size=8]
	Expansion ROM at <unassigned> [disabled]
	Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit-
	Capabilities: [d0] Power Management version 2
	Capabilities: [a4] PCI Advanced Features
	Kernel driver in use: i915
	Kernel modules: i915

00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06)
	Subsystem: Hewlett-Packard Company Device 144b
	Flags: bus master, fast devsel, latency 0, IRQ 42
	Memory at c4504000 (64-bit, non-prefetchable) [size=16]
	Capabilities: [50] Power Management version 3
	Capabilities: [8c] MSI: Enable+ Count=1/1 Maskable- 64bit+
	Kernel driver in use: mei_me
	Kernel modules: mei_me

00:1a.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05) (prog-if 20 [EHCI])
	Subsystem: Hewlett-Packard Company Device 144b
	Flags: bus master, medium devsel, latency 0, IRQ 16
	Memory at c450a000 (32-bit, non-prefetchable) [size=1K]
	Capabilities: [50] Power Management version 2
	Capabilities: [58] Debug port: BAR=1 offset=00a0
	Capabilities: [98] PCI Advanced Features
	Kernel driver in use: ehci-pci
	Kernel modules: ehci_pci

00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 05)
	Subsystem: Hewlett-Packard Company Device 144b
	Flags: bus master, fast devsel, latency 0, IRQ 43
	Memory at c4500000 (64-bit, non-prefetchable) [size=16K]
	Capabilities: [50] Power Management version 2
	Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+
	Capabilities: [70] Express Root Complex Integrated Endpoint, MSI 00
	Capabilities: [100] Virtual Channel
	Capabilities: [130] Root Complex Link
	Kernel driver in use: snd_hda_intel
	Kernel modules: snd_hda_intel

00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 05) (prog-if 00 [Normal decode])
	Flags: bus master, fast devsel, latency 0
	Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
	I/O behind bridge: 00003000-00003fff
	Memory behind bridge: c3400000-c43fffff
	Prefetchable memory behind bridge: 00000000c0400000-00000000c13fffff
	Capabilities: [40] Express Root Port (Slot+), MSI 00
	Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit-
	Capabilities: [90] Subsystem: Hewlett-Packard Company Device 144b
	Capabilities: [a0] Power Management version 2
	Kernel driver in use: pcieport
	Kernel modules: shpchp

00:1c.1 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 (rev 05) (prog-if 00 [Normal decode])
	Flags: bus master, fast devsel, latency 0
	Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
	I/O behind bridge: 00002000-00002fff
	Memory behind bridge: c2400000-c33fffff
	Prefetchable memory behind bridge: 00000000c1400000-00000000c23fffff
	Capabilities: [40] Express Root Port (Slot+), MSI 00
	Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit-
	Capabilities: [90] Subsystem: Hewlett-Packard Company Device 144b
	Capabilities: [a0] Power Management version 2
	Kernel driver in use: pcieport
	Kernel modules: shpchp

00:1d.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05) (prog-if 20 [EHCI])
	Subsystem: Hewlett-Packard Company Device 144b
	Flags: bus master, medium devsel, latency 0, IRQ 21
	Memory at c4509000 (32-bit, non-prefetchable) [size=1K]
	Capabilities: [50] Power Management version 2
	Capabilities: [58] Debug port: BAR=1 offset=00a0
	Capabilities: [98] PCI Advanced Features
	Kernel driver in use: ehci-pci
	Kernel modules: ehci_pci

00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a5) (prog-if 01 [Subtractive decode])
	Flags: bus master, fast devsel, latency 0
	Bus: primary=00, secondary=04, subordinate=04, sec-latency=32
	Capabilities: [50] Subsystem: Hewlett-Packard Company Device 144b

00:1f.0 ISA bridge: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller (rev 05)
	Subsystem: Hewlett-Packard Company Device 144b
	Flags: bus master, medium devsel, latency 0
	Capabilities: [e0] Vendor Specific Information: Len=10 <?>
	Kernel driver in use: lpc_ich
	Kernel modules: lpc_ich

00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 4 port SATA AHCI Controller (rev 05) (prog-if 01 [AHCI 1.0])
	Subsystem: Hewlett-Packard Company Device 144b
	Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 41
	I/O ports at 5048 [size=8]
	I/O ports at 505c [size=4]
	I/O ports at 5040 [size=8]
	I/O ports at 5058 [size=4]
	I/O ports at 5020 [size=32]
	Memory at c4508000 (32-bit, non-prefetchable) [size=2K]
	Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
	Capabilities: [70] Power Management version 3
	Capabilities: [a8] SATA HBA v1.0
	Capabilities: [b0] PCI Advanced Features
	Kernel driver in use: ahci
	Kernel modules: ahci

00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 05)
	Subsystem: Hewlett-Packard Company Device 144b
	Flags: medium devsel, IRQ 19
	Memory at c4506000 (64-bit, non-prefetchable) [size=256]
	I/O ports at 5000 [size=32]
	Kernel modules: i2c_i801

00:1f.6 Signal processing controller: Intel Corporation 5 Series/3400 Series Chipset Thermal Subsystem (rev 05)
	Subsystem: Hewlett-Packard Company Device 144b
	Flags: bus master, fast devsel, latency 0, IRQ 19
	Memory at c4507000 (64-bit, non-prefetchable) [size=4K]
	Capabilities: [50] Power Management version 3
	Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit-
	Kernel driver in use: intel ips
	Kernel modules: intel_ips

01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Madison [Mobility Radeon HD 5650/5750 / 6530M/6550M] (prog-if 00 [VGA controller])
	Subsystem: Hewlett-Packard Company Mobility Radeon HD 5650
	Flags: bus master, fast devsel, latency 0, IRQ 48
	Memory at a0000000 (64-bit, prefetchable) [size=256M]
	Memory at c4400000 (64-bit, non-prefetchable) [size=128K]
	I/O ports at 4000 [size=256]
	Expansion ROM at c4440000 [disabled] [size=128K]
	Capabilities: [50] Power Management version 3
	Capabilities: [58] Express Legacy Endpoint, MSI 00
	Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit+
	Capabilities: [100] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?>
	Kernel driver in use: radeon
	Kernel modules: radeon, fglrx

01:00.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Redwood HDMI Audio [Radeon HD 5000 Series]
	Subsystem: Hewlett-Packard Company Device 144b
	Flags: bus master, fast devsel, latency 0, IRQ 45
	Memory at c4420000 (64-bit, non-prefetchable) [size=16K]
	Capabilities: [50] Power Management version 3
	Capabilities: [58] Express Legacy Endpoint, MSI 00
	Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit+
	Capabilities: [100] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?>
	Kernel driver in use: snd_hda_intel
	Kernel modules: snd_hda_intel

02:00.0 Network controller: Intel Corporation Centrino Wireless-N 1000 [Condor Peak]
	Subsystem: Intel Corporation Centrino Wireless-N 1000 BGN
	Flags: bus master, fast devsel, latency 0, IRQ 46
	Memory at c3400000 (64-bit, non-prefetchable) [size=8K]
	Capabilities: [c8] Power Management version 3
	Capabilities: [d0] MSI: Enable+ Count=1/1 Maskable- 64bit+
	Capabilities: [e0] Express Endpoint, MSI 00
	Capabilities: [100] Advanced Error Reporting
	Capabilities: [140] Device Serial Number 00-26-c7-ff-ff-d9-b9-da
	Kernel driver in use: iwlwifi
	Kernel modules: iwlwifi

03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 03)
	Subsystem: Hewlett-Packard Company Device 144b
	Flags: bus master, fast devsel, latency 0, IRQ 44
	I/O ports at 2000 [size=256]
	Memory at c1404000 (64-bit, prefetchable) [size=4K]
	Memory at c1400000 (64-bit, prefetchable) [size=16K]
	Expansion ROM at c1410000 [disabled] [size=64K]
	Capabilities: [40] Power Management version 3
	Capabilities: [50] MSI: Enable+ Count=1/1 Maskable- 64bit+
	Capabilities: [70] Express Endpoint, MSI 01
	Capabilities: [ac] MSI-X: Enable- Count=4 Masked-
	Capabilities: [cc] Vital Product Data
	Capabilities: [100] Advanced Error Reporting
	Capabilities: [140] Virtual Channel
	Capabilities: [160] Device Serial Number 00-00-00-00-00-00-00-00
	Kernel driver in use: r8169
	Kernel modules: r8169

7f:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers (rev 02)
	Subsystem: Hewlett-Packard Company Device 144b
	Flags: bus master, fast devsel, latency 0

7f:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 02)
	Subsystem: Hewlett-Packard Company Device 144b
	Flags: bus master, fast devsel, latency 0

7f:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 02)
	Subsystem: Hewlett-Packard Company Device 144b
	Flags: bus master, fast devsel, latency 0

7f:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 02)
	Subsystem: Hewlett-Packard Company Device 144b
	Flags: bus master, fast devsel, latency 0

7f:02.2 Host bridge: Intel Corporation Core Processor Reserved (rev 02)
	Subsystem: Hewlett-Packard Company Device 144b
	Flags: bus master, fast devsel, latency 0

7f:02.3 Host bridge: Intel Corporation Core Processor Reserved (rev 02)
	Subsystem: Hewlett-Packard Company Device 144b
	Flags: bus master, fast devsel, latency 0

 ]

The problem with the reference to the drivers appeared to be because I also had xf86-video-intel installed for the intel integrated card. Once that driver is removed, this is the Xorg.0.log file:

 [   141.240] 
X.Org X Server 1.14.5
Release Date: 2013-12-12
[   141.240] X Protocol Version 11, Revision 0
[   141.240] Build Operating System: Linux 3.12.6-1-ARCH x86_64 
[   141.240] Current Operating System: Linux HP-DV7 3.12.7-2-ARCH #1 SMP PREEMPT Sun Jan 12 13:09:09 CET 2014 x86_64
[   141.240] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=a303086c-e564-4347-92f1-8ec5ecbdcf85 rw
[   141.240] Build Date: 08 January 2014  01:35:51PM
[   141.240]  
[   141.240] Current version of pixman: 0.32.4
[   141.240] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[   141.240] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[   141.240] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Jan 18 14:35:55 2014
[   141.240] (==) Using config file: "/etc/X11/xorg.conf"
[   141.240] (==) Using config directory: "/etc/X11/xorg.conf.d"
[   141.240] (==) ServerLayout "aticonfig Layout"
[   141.240] (**) |-->Screen "aticonfig-Screen[0]-0" (0)
[   141.240] (**) |   |-->Monitor "aticonfig-Monitor[0]-0"
[   141.241] (**) |   |-->Device "aticonfig-Device[0]-0"
[   141.241] (==) Automatically adding devices
[   141.241] (==) Automatically enabling devices
[   141.241] (==) Automatically adding GPU devices
[   141.241] (==) FontPath set to:
	/usr/share/fonts/misc/,
	/usr/share/fonts/TTF/,
	/usr/share/fonts/OTF/,
	/usr/share/fonts/Type1/,
	/usr/share/fonts/100dpi/,
	/usr/share/fonts/75dpi/
[   141.241] (**) ModulePath set to "/usr/lib/xorg/modules/updates,/usr/lib/xorg/modules"
[   141.241] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[   141.241] (II) Loader magic: 0x7fac20
[   141.241] (II) Module ABI versions:
[   141.241] 	X.Org ANSI C Emulation: 0.4
[   141.241] 	X.Org Video Driver: 14.1
[   141.241] 	X.Org XInput driver : 19.1
[   141.241] 	X.Org Server Extension : 7.0
[   141.241] (II) xfree86: Adding drm device (/dev/dri/card0)
[   141.241] (II) xfree86: Adding drm device (/dev/dri/card1)
[   141.244] (--) PCI:*(0:0:2:0) 8086:0046:103c:144b rev 2, Mem @ 0xc0000000/4194304, 0xb0000000/268435456, I/O @ 0x00005050/8
[   141.244] (--) PCI: (0:1:0:0) 1002:68c1:103c:144b rev 0, Mem @ 0xa0000000/268435456, 0xc4400000/131072, I/O @ 0x00004000/256, BIOS @ 0x????????/131072
[   141.244] Initializing built-in extension Generic Event Extension
[   141.244] Initializing built-in extension SHAPE
[   141.244] Initializing built-in extension MIT-SHM
[   141.244] Initializing built-in extension XInputExtension
[   141.244] Initializing built-in extension XTEST
[   141.244] Initializing built-in extension BIG-REQUESTS
[   141.244] Initializing built-in extension SYNC
[   141.244] Initializing built-in extension XKEYBOARD
[   141.244] Initializing built-in extension XC-MISC
[   141.244] Initializing built-in extension SECURITY
[   141.244] Initializing built-in extension XINERAMA
[   141.244] Initializing built-in extension XFIXES
[   141.244] Initializing built-in extension RENDER
[   141.244] Initializing built-in extension RANDR
[   141.244] Initializing built-in extension COMPOSITE
[   141.244] Initializing built-in extension DAMAGE
[   141.244] Initializing built-in extension MIT-SCREEN-SAVER
[   141.244] Initializing built-in extension DOUBLE-BUFFER
[   141.244] Initializing built-in extension RECORD
[   141.244] Initializing built-in extension DPMS
[   141.244] Initializing built-in extension X-Resource
[   141.244] Initializing built-in extension XVideo
[   141.244] Initializing built-in extension XVideo-MotionCompensation
[   141.244] Initializing built-in extension XFree86-VidModeExtension
[   141.244] Initializing built-in extension XFree86-DGA
[   141.244] Initializing built-in extension XFree86-DRI
[   141.244] Initializing built-in extension DRI2
[   141.244] (II) "glx" will be loaded by default.
[   141.244] (II) LoadModule: "glx"
[   141.244] (II) Loading /usr/lib/xorg/modules/updates/extensions/libglx.so
[   141.244] (II) Module glx: vendor="Advanced Micro Devices, Inc."
[   141.244] 	compiled for 6.9.0, module version = 1.0.0
[   141.244] Loading extension GLX
[   141.244] (II) LoadModule: "fglrx"
[   141.245] (II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
[   141.261] (II) Module fglrx: vendor="FireGL - AMD Technologies Inc."
[   141.261] 	compiled for 1.4.99.906, module version = 13.25.5
[   141.261] 	Module class: X.Org Video Driver
[   141.262] (II) Loading sub module "fglrxdrm"
[   141.262] (II) LoadModule: "fglrxdrm"
[   141.262] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[   141.262] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
[   141.262] 	compiled for 1.4.99.906, module version = 13.25.5
[   141.262] (II) AMD Proprietary Linux Driver Version Identifier:13.25.5
[   141.262] (II) AMD Proprietary Linux Driver Release Identifier: UNSUPPORTED-13.25.18                 
[   141.262] (II) AMD Proprietary Linux Driver Build Date: Jan  8 2014 11:42:37
[   141.262] (++) using VT number 1

[   141.262] (WW) Falling back to old probe method for fglrx
[   141.270] (II) Loading PCS database from /etc/ati/amdpcsdb /etc/ati/amdpcsdb.default
[   141.345] ukiDynamicMajor: failed to open /proc/ati/major
[   141.345] ukiDynamicMajor: failed to open /proc/ati/major
[   141.347] (--) Chipset Supported AMD Graphics Processor (0x68C1) found
[   141.347] (WW) fglrx: No matching Device section for instance (BusID PCI:0@1:0:1) found
[   141.348] (II) fglrx(0): pEnt->device->identifier=0xdd9890
[   141.348] (II) fglrx(0): === [xdl_xs114_atiddxPreInit] === begin
[   141.349] (**) fglrx(0): Depth 24, (--) framebuffer bpp 32
[   141.349] (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[   141.349] (==) fglrx(0): Default visual is TrueColor
[   141.349] (**) fglrx(0): Option "DPMS" "true"
[   141.349] (==) fglrx(0): RGB weight 888
[   141.349] (II) fglrx(0): Using 8 bits per RGB 
[   141.349] (==) fglrx(0): Buffer Tiling is ON
[   141.349] (II) Loading sub module "fglrxdrm"
[   141.349] (II) LoadModule: "fglrxdrm"
[   141.349] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[   141.349] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
[   141.349] 	compiled for 1.4.99.906, module version = 13.25.5
[   141.425] ukiDynamicMajor: failed to open /proc/ati/major
[   141.425] ukiDynamicMajor: failed to open /proc/ati/major
[   141.425] (**) fglrx(0): NoAccel = NO
[   141.426] (**) fglrx(0): AMD 2D Acceleration Architecture enabled
[   141.426] (--) fglrx(0): Chipset: "AMD Radeon HD 6500M/5600/5700 Series" (Chipset = 0x68c1)
[   141.426] (--) fglrx(0): (PciSubVendor = 0x103c, PciSubDevice = 0x144b)
[   141.426] (==) fglrx(0): board vendor info: third party graphics adapter - NOT original AMD
[   141.426] (--) fglrx(0): Linear framebuffer (phys) at 0xa0000000
[   141.426] (--) fglrx(0): MMIO registers at 0xc4400000
[   141.426] (--) fglrx(0): I/O port at 0x00004000
[   141.426] (==) fglrx(0): ROM-BIOS at 0x000c0000
[   141.430] (II) fglrx(0): Invalid ATI BIOS from int10, the adapter is not VGA-enabled
[   141.430] (EE) fglrx(0): Invalid video BIOS signature!
[   141.430] (EE) fglrx(0): GetBIOSParameter failed
[   141.430] (EE) fglrx(0): PreInitAdapter failed
[   141.430] (EE) fglrx(0): PreInit failed
[   141.430] (II) fglrx(0): === [xdl_xs114_atiddxPreInit] === end
[   141.433] (II) UnloadModule: "fglrx"
[   141.433] (II) UnloadSubModule: "fglrxdrm"
[   141.433] (II) Unloading fglrxdrm
[   141.433] (II) UnloadSubModule: "fglrxdrm"
[   141.433] (EE) Screen(s) found, but none have a usable configuration.
[   141.433] (EE) 
Fatal server error:
[   141.433] (EE) no screens found(EE) 
[   141.433] (EE) 
Please consult the The X.Org Foundation support 
	 at http://wiki.x.org
 for help. 
[   141.433] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[   141.433] (EE) 
[   141.438] (EE) Server terminated with error (1). Closing log file.

To me it looks as an xorg.conf configuration mismatch but I am not too sure.

Last edited by MorningWood (2014-01-18 19:40:16)

MorningWood · 2014-01-19 04:10:12

update:
I have tried catalyst-total-pxp and this is the Xorg log following that:

[   135.198] 
X.Org X Server 1.14.5
Release Date: 2013-12-12
[   135.203] X Protocol Version 11, Revision 0
[   135.204] Build Operating System: Linux 3.12.6-1-ARCH x86_64 
[   135.205] Current Operating System: Linux HP-DV7 3.12.7-2-ARCH #1 SMP PREEMPT Sun Jan 12 13:09:09 CET 2014 x86_64
[   135.205] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=a303086c-e564-4347-92f1-8ec5ecbdcf85 rw
[   135.208] Build Date: 08 January 2014  01:35:51PM
[   135.209]  
[   135.210] Current version of pixman: 0.32.4
[   135.212] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[   135.212] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[   135.216] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Jan 18 22:48:27 2014
[   135.218] (==) Using config file: "/etc/X11/xorg.conf"
[   135.219] (==) Using config directory: "/etc/X11/xorg.conf.d"
[   135.219] (==) ServerLayout "aticonfig Layout"
[   135.219] (**) |-->Screen "aticonfig-Screen[0]-0" (0)
[   135.219] (**) |   |-->Monitor "aticonfig-Monitor[0]-0"
[   135.219] (**) |   |-->Device "aticonfig-Device[0]-0"
[   135.219] (==) Automatically adding devices
[   135.219] (==) Automatically enabling devices
[   135.219] (==) Automatically adding GPU devices
[   135.219] (==) FontPath set to:
	/usr/share/fonts/misc/,
	/usr/share/fonts/TTF/,
	/usr/share/fonts/OTF/,
	/usr/share/fonts/Type1/,
	/usr/share/fonts/100dpi/,
	/usr/share/fonts/75dpi/
[   135.219] (**) ModulePath set to "/usr/lib/xorg/modules/updates,/usr/lib/xorg/modules"
[   135.219] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[   135.219] (II) Loader magic: 0x7fac20
[   135.219] (II) Module ABI versions:
[   135.219] 	X.Org ANSI C Emulation: 0.4
[   135.219] 	X.Org Video Driver: 14.1
[   135.219] 	X.Org XInput driver : 19.1
[   135.219] 	X.Org Server Extension : 7.0
[   135.219] (II) xfree86: Adding drm device (/dev/dri/card0)
[   135.221] (--) PCI:*(0:0:2:0) 8086:0046:103c:144b rev 2, Mem @ 0xc0000000/4194304, 0xb0000000/268435456, I/O @ 0x00005050/8
[   135.221] (--) PCI: (0:1:0:0) 1002:68c1:103c:144b rev 0, Mem @ 0xa0000000/268435456, 0xc4400000/131072, I/O @ 0x00004000/256, BIOS @ 0x????????/131072
[   135.222] Initializing built-in extension Generic Event Extension
[   135.223] Initializing built-in extension SHAPE
[   135.224] Initializing built-in extension MIT-SHM
[   135.225] Initializing built-in extension XInputExtension
[   135.226] Initializing built-in extension XTEST
[   135.227] Initializing built-in extension BIG-REQUESTS
[   135.228] Initializing built-in extension SYNC
[   135.229] Initializing built-in extension XKEYBOARD
[   135.230] Initializing built-in extension XC-MISC
[   135.231] Initializing built-in extension SECURITY
[   135.232] Initializing built-in extension XINERAMA
[   135.233] Initializing built-in extension XFIXES
[   135.234] Initializing built-in extension RENDER
[   135.236] Initializing built-in extension RANDR
[   135.237] Initializing built-in extension COMPOSITE
[   135.238] Initializing built-in extension DAMAGE
[   135.239] Initializing built-in extension MIT-SCREEN-SAVER
[   135.240] Initializing built-in extension DOUBLE-BUFFER
[   135.241] Initializing built-in extension RECORD
[   135.242] Initializing built-in extension DPMS
[   135.243] Initializing built-in extension X-Resource
[   135.244] Initializing built-in extension XVideo
[   135.245] Initializing built-in extension XVideo-MotionCompensation
[   135.246] Initializing built-in extension XFree86-VidModeExtension
[   135.247] Initializing built-in extension XFree86-DGA
[   135.248] Initializing built-in extension XFree86-DRI
[   135.249] Initializing built-in extension DRI2
[   135.249] (II) "glx" will be loaded by default.
[   135.249] (II) LoadModule: "glx"
[   135.249] (II) Loading /usr/lib/xorg/modules/updates/extensions/libglx.so
[   135.249] (II) Module glx: vendor="Advanced Micro Devices, Inc."
[   135.249] 	compiled for 6.9.0, module version = 1.0.0
[   135.251] Loading extension GLX
[   135.251] (II) LoadModule: "fglrx"
[   135.251] (II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
[   135.267] (II) Module fglrx: vendor="FireGL - AMD Technologies Inc."
[   135.267] 	compiled for 1.4.99.906, module version = 13.25.5
[   135.267] 	Module class: X.Org Video Driver
[   135.267] (II) Loading sub module "fglrxdrm"
[   135.267] (II) LoadModule: "fglrxdrm"
[   135.267] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[   135.267] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
[   135.267] 	compiled for 1.4.99.906, module version = 13.25.5
[   135.267] (II) AMD Proprietary Linux Driver Version Identifier:13.25.5
[   135.267] (II) AMD Proprietary Linux Driver Release Identifier: 13.251                               
[   135.267] (II) AMD Proprietary Linux Driver Build Date: Dec  6 2013 15:19:03
[   135.267] (++) using VT number 1

[   135.267] (WW) Falling back to old probe method for fglrx
[   135.275] (II) Loading PCS database from /etc/ati/amdpcsdb /etc/ati/amdpcsdb.default
[   135.277] ukiDynamicMajor: found major device number 250
[   135.277] ukiDynamicMajor: found major device number 250
[   135.277] ukiOpenByBusid: Searching for BusID PCI:01:00:0
[   135.277] ukiOpenDevice: node name is /dev/ati/card0
[   135.277] ukiOpenDevice: open result is 9, (OK)
[   135.277] ukiOpenByBusid: ukiOpenMinor returns 9
[   135.277] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[   135.279] (--) Chipset Supported AMD Graphics Processor (0x68C1) found
[   135.280] (WW) fglrx: No matching Device section for instance (BusID PCI:0@1:0:1) found
[   135.280] (II) fglrx: intel VGA device detected, load intel driver.
[   135.280] (II) LoadModule: "intel"
[   135.280] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[   135.280] (II) Module intel: vendor="X.Org Foundation"
[   135.280] 	compiled for 1.14.2, module version = 2.21.15
[   135.280] 	Module class: X.Org Video Driver
[   135.280] 	ABI class: X.Org Video Driver, version 14.1
[   135.280] (WW) PowerXpress feature is not supported on A+I Mux platform. Please uninstall fglrx driver.
[   135.280] (EE) this is a Muxless PX A+I platform, we doesn't supported it
[   135.281] (EE) No devices detected.
[   135.281] (EE) 
Fatal server error:
[   135.281] (EE) no screens found(EE) 
[   135.281] (EE) 
Please consult the The X.Org Foundation support 
	 at http://wiki.x.org
 for help. 
[   135.281] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[   135.281] (EE)

[ 135.280] (WW) PowerXpress feature is not supported on A+I Mux platform. Please uninstall fglrx driver.
[ 135.280] (EE) this is a Muxless PX A+I platform, we doesn't supported it
[ 135.281] (EE) No devices detected.
[ 135.281] (EE)
Fatal server error:
[ 135.281] (EE) no screens found(EE)

What exactly does this mean? Does catalyst-hook not support muxless A+I? or is this in reference to the driver?
Should I post this in the catalyst-total-pxp aur comments?

Last edited by MorningWood (2014-01-19 04:12:38)

ewaller · 2014-01-19 05:13:27

I do not have your hardware, but your log offered some advice. Did you try it?

[   135.280] (WW) PowerXpress feature is not supported on A+I Mux platform. Please uninstall fglrx driver.

MorningWood · 2014-01-19 06:23:56

If I uninstall fglrx by removing catalyst-total-pxp, I have to run catalyst and catalyst utilities which conflict with Intel drivers.

Last edited by MorningWood (2014-01-19 06:26:35)

MorningWood · 2014-01-25 05:39:48

I have toyed with the catalyst-total-pxp configuration and it will now launch x but executing a cinnamon session kicks me back out into the console.

E: Dmesg output and Xorg log both look fine (to me).

dmesg

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.12.8-1-ARCH (tobias@T-POWA-LX) (gcc version 4.8.2 20131219 (prerelease) (GCC) ) #1 SMP PREEMPT Thu Jan 16 09:16:34 CET 2014
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=a303086c-e564-4347-92f1-8ec5ecbdcf85 rw
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009cfff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009d000-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000009b63efff] usable
[    0.000000] BIOS-e820: [mem 0x000000009b63f000-0x000000009b6befff] reserved
[    0.000000] BIOS-e820: [mem 0x000000009b6bf000-0x000000009b7befff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000009b7bf000-0x000000009b7fefff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000009b7ff000-0x000000009b7fffff] usable
[    0.000000] BIOS-e820: [mem 0x000000009b800000-0x000000009fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f7ffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed13fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed18000-0x00000000fed19fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1b000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffe80000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000001fbffffff] usable
[    0.000000] BIOS-e820: [mem 0x00000001fc000000-0x00000001ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000200000000-0x000000025bffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.6 present.
[    0.000000] DMI: Hewlett-Packard HP Pavilion dv7 Notebook PC/144B, BIOS F.29 11/07/2011
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] No AGP bridge found
[    0.000000] e820: last_pfn = 0x25c000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-EFFFF write-through
[    0.000000]   F0000-FFFFF write-combining
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F80000000 write-back
[    0.000000]   1 base 0FFE00000 mask FFFE00000 write-protect
[    0.000000]   2 base 080000000 mask FE0000000 write-back
[    0.000000]   3 base 09C000000 mask FFC000000 uncachable
[    0.000000]   4 base 09B800000 mask FFF800000 uncachable
[    0.000000]   5 base 100000000 mask F00000000 write-back
[    0.000000]   6 base 200000000 mask F80000000 write-back
[    0.000000]   7 base 25C000000 mask FFC000000 uncachable
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] e820: last_pfn = 0x9b800 max_arch_pfn = 0x400000000
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] BRK [0x01b32000, 0x01b32fff] PGTABLE
[    0.000000] BRK [0x01b33000, 0x01b33fff] PGTABLE
[    0.000000] BRK [0x01b34000, 0x01b34fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x25be00000-0x25bffffff]
[    0.000000]  [mem 0x25be00000-0x25bffffff] page 2M
[    0.000000] BRK [0x01b35000, 0x01b35fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x258000000-0x25bdfffff]
[    0.000000]  [mem 0x258000000-0x25bdfffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x200000000-0x257ffffff]
[    0.000000]  [mem 0x200000000-0x257ffffff] page 2M
[    0.000000] BRK [0x01b36000, 0x01b36fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x00100000-0x9b63efff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0x9b5fffff] page 2M
[    0.000000]  [mem 0x9b600000-0x9b63efff] page 4k
[    0.000000] init_memory_mapping: [mem 0x9b7ff000-0x9b7fffff]
[    0.000000]  [mem 0x9b7ff000-0x9b7fffff] page 4k
[    0.000000] init_memory_mapping: [mem 0x100000000-0x1fbffffff]
[    0.000000]  [mem 0x100000000-0x1fbffffff] page 2M
[    0.000000] BRK [0x01b37000, 0x01b37fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x37a28000-0x37d0bfff]
[    0.000000] ACPI: RSDP 00000000000fe020 00024 (v02 HPQOEM)
[    0.000000] ACPI: XSDT 000000009b7fe120 0007C (v01 HPQOEM SLIC-MPC 00000001      01000013)
[    0.000000] ACPI: FACP 000000009b7fc000 000F4 (v04 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[    0.000000] ACPI: DSDT 000000009b7e9000 0F50F (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[    0.000000] ACPI: FACS 000000009b75e000 00040
[    0.000000] ACPI: ASF! 000000009b7fd000 000A5 (v32 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[    0.000000] ACPI: HPET 000000009b7fb000 00038 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[    0.000000] ACPI: APIC 000000009b7fa000 0008C (v02 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[    0.000000] ACPI: MCFG 000000009b7f9000 0003C (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[    0.000000] ACPI: SLIC 000000009b7e8000 00176 (v01 HPQOEM SLIC-MPC 00000001 SLIC 000F4240)
[    0.000000] ACPI: BOOT 000000009b7e5000 00028 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[    0.000000] ACPI: ASPT 000000009b7e2000 00034 (v04 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[    0.000000] ACPI: WDAT 000000009b7e1000 00224 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[    0.000000] ACPI: SSDT 000000009b7e0000 009F1 (v01  PmRef    CpuPm 00003000 INTL 20051117)
[    0.000000] ACPI: SSDT 000000009b7de000 01B34 (v01 AmdRef  AmdTabl 00001000 INTL 20051117)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000025bffffff]
[    0.000000] Initmem setup node 0 [mem 0x00000000-0x25bffffff]
[    0.000000]   NODE_DATA [mem 0x25bff5000-0x25bff9fff]
[    0.000000]  [ffffea0000000000-ffffea00097fffff] PMD -> [ffff880253600000-ffff88025b5fffff] on node 0
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
[    0.000000]   Normal   [mem 0x100000000-0x25bffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x0009cfff]
[    0.000000]   node   0: [mem 0x00100000-0x9b63efff]
[    0.000000]   node   0: [mem 0x9b7ff000-0x9b7fffff]
[    0.000000]   node   0: [mem 0x100000000-0x1fbffffff]
[    0.000000]   node   0: [mem 0x200000000-0x25bffffff]
[    0.000000] On node 0 totalpages: 2045404
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3996 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 9881 pages used for memmap
[    0.000000]   DMA32 zone: 632384 pages, LIFO batch:31
[    0.000000]   Normal zone: 22272 pages used for memmap
[    0.000000]   Normal zone: 1409024 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x05] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x9b63f000-0x9b6befff]
[    0.000000] PM: Registered nosave memory: [mem 0x9b6bf000-0x9b7befff]
[    0.000000] PM: Registered nosave memory: [mem 0x9b7bf000-0x9b7fefff]
[    0.000000] PM: Registered nosave memory: [mem 0x9b800000-0x9fffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xa0000000-0xefffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xf7ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfeafffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfeb03fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfeb04000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed13fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed14000-0xfed17fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed18000-0xfed19fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1afff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1b000-0xfed1ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffe7ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xffe80000-0xffffffff]
[    0.000000] PM: Registered nosave memory: [mem 0x1fc000000-0x1ffffffff]
[    0.000000] e820: [mem 0xa0000000-0xefffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1
[    0.000000] PERCPU: Embedded 29 pages/cpu @ffff88025bc00000 s86464 r8192 d24128 u262144
[    0.000000] pcpu-alloc: s86464 r8192 d24128 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 2013166
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=a303086c-e564-4347-92f1-8ec5ecbdcf85 rw
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 7968736K/8181616K available (5116K kernel code, 807K rwdata, 1628K rodata, 1144K init, 1288K bss, 212880K reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] 	Dump stacks of tasks blocking RCU-preempt GP.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8.
[    0.000000] NR_IRQS:8448 nr_irqs:744 16
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] allocated 33554432 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.003333] tsc: Detected 2527.115 MHz processor
[    0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 5056.82 BogoMIPS (lpj=8423716)
[    0.000006] pid_max: default: 32768 minimum: 301
[    0.000034] Security Framework initialized
[    0.000044] AppArmor: AppArmor disabled by boot time parameter
[    0.000045] Yama: becoming mindful.
[    0.000540] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.002404] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.003228] Mount-cache hash table entries: 256
[    0.003423] Initializing cgroup subsys memory
[    0.003435] Initializing cgroup subsys devices
[    0.003437] Initializing cgroup subsys freezer
[    0.003439] Initializing cgroup subsys net_cls
[    0.003440] Initializing cgroup subsys blkio
[    0.003461] CPU: Physical Processor ID: 0
[    0.003462] CPU: Processor Core ID: 0
[    0.003467] mce: CPU supports 9 MCE banks
[    0.003478] CPU0: Thermal monitoring enabled (TM1)
[    0.003488] Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
tlb_flushall_shift: 6
[    0.003577] Freeing SMP alternatives memory: 20K (ffffffff819e9000 - ffffffff819ee000)
[    0.004553] ACPI: Core revision 20130725
[    0.013862] ACPI: All ACPI Tables successfully acquired
[    0.040074] ftrace: allocating 20317 entries in 80 pages
[    0.050041] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.083030] smpboot: CPU0: Intel(R) Core(TM) i5 CPU       M 460  @ 2.53GHz (fam: 06, model: 25, stepping: 05)
[    0.187276] Performance Events: PEBS fmt1+, 16-deep LBR, Westmere events, Intel PMU driver.
[    0.187282] perf_event_intel: CPUID marked event: 'bus cycles' unavailable
[    0.187285] ... version:                3
[    0.187285] ... bit width:              48
[    0.187286] ... generic registers:      4
[    0.187287] ... value mask:             0000ffffffffffff
[    0.187288] ... max period:             000000007fffffff
[    0.187289] ... fixed-purpose events:   3
[    0.187290] ... event mask:             000000070000000f
[    0.663841] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.650477] smpboot: Booting Node   0, Processors  #   1 #   2 #   3 OK
[    0.703729] Brought up 4 CPUs
[    0.703734] smpboot: Total of 4 processors activated (20225.29 BogoMIPS)
[    0.706247] devtmpfs: initialized
[    0.709362] PM: Registering ACPI NVS region [mem 0x9b6bf000-0x9b7befff] (1048576 bytes)
[    0.710207] RTC time:  6:14:18, date: 01/25/14
[    0.710248] NET: Registered protocol family 16
[    0.710345] cpuidle: using governor ladder
[    0.710347] cpuidle: using governor menu
[    0.710375] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.710377] ACPI: bus type PCI registered
[    0.710379] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.710443] PCI: MMCONFIG for domain 0000 [bus 00-7f] at [mem 0xf0000000-0xf7ffffff] (base 0xf0000000)
[    0.710446] PCI: MMCONFIG at [mem 0xf0000000-0xf7ffffff] reserved in E820
[    0.717442] PCI: Using configuration type 1 for base access
[    0.718023] bio: create slab <bio-0> at 0
[    0.718137] ACPI: Added _OSI(Module Device)
[    0.718139] ACPI: Added _OSI(Processor Device)
[    0.718140] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.718141] ACPI: Added _OSI(Processor Aggregator Device)
[    0.719738] ACPI: EC: Look up EC in DSDT
[    0.727062] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    0.732709] ACPI: SSDT 000000009b691918 00432 (v01  PmRef  Cpu0Ist 00003000 INTL 20051117)
[    0.733085] ACPI: Dynamic OEM Table Load:
[    0.733087] ACPI: SSDT           (null) 00432 (v01  PmRef  Cpu0Ist 00003000 INTL 20051117)
[    0.733226] ACPI: SSDT 000000009b68f018 00891 (v01  PmRef  Cpu0Cst 00003001 INTL 20051117)
[    0.733586] ACPI: Dynamic OEM Table Load:
[    0.733588] ACPI: SSDT           (null) 00891 (v01  PmRef  Cpu0Cst 00003001 INTL 20051117)
[    0.757289] ACPI: SSDT 000000009b690a98 00303 (v01  PmRef    ApIst 00003000 INTL 20051117)
[    0.757699] ACPI: Dynamic OEM Table Load:
[    0.757701] ACPI: SSDT           (null) 00303 (v01  PmRef    ApIst 00003000 INTL 20051117)
[    0.767184] ACPI: SSDT 000000009b68ed98 00119 (v01  PmRef    ApCst 00003000 INTL 20051117)
[    0.767569] ACPI: Dynamic OEM Table Load:
[    0.767571] ACPI: SSDT           (null) 00119 (v01  PmRef    ApCst 00003000 INTL 20051117)
[    0.827076] ACPI: Interpreter enabled
[    0.827091] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130725/hwxface-571)
[    0.827097] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130725/hwxface-571)
[    0.827117] ACPI: (supports S0 S3 S4 S5)
[    0.827119] ACPI: Using IOAPIC for interrupt routing
[    0.827154] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.827263] ACPI: No dock devices found.
[    1.461183] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-7e])
[    1.461215] \_SB_.PCI0:_OSC invalid UUID
[    1.461216] _OSC request data:1 8 0 
[    1.461245] \_SB_.PCI0:_OSC invalid UUID
[    1.461246] _OSC request data:1 1f 0 
[    1.461249] acpi PNP0A08:00: ACPI _OSC support notification failed, disabling PCIe ASPM
[    1.461251] acpi PNP0A08:00: Unable to request _OSC control (_OSC support mask: 0x08)
[    1.461907] PCI host bridge to bus 0000:00
[    1.461911] pci_bus 0000:00: root bus resource [bus 00-7e]
[    1.461912] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    1.461914] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
[    1.461915] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    1.461917] pci_bus 0000:00: root bus resource [mem 0xa0000000-0xfeafffff]
[    1.461925] pci 0000:00:00.0: [8086:0044] type 00 class 0x060000
[    1.461941] DMAR: Disabling batched IOTLB flush on Ironlake
[    1.462003] pci 0000:00:01.0: [8086:0045] type 01 class 0x060400
[    1.462034] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    1.462069] pci 0000:00:01.0: System wakeup disabled by ACPI
[    1.462102] pci 0000:00:02.0: [8086:0046] type 00 class 0x030000
[    1.462112] pci 0000:00:02.0: reg 0x10: [mem 0xc0000000-0xc03fffff 64bit]
[    1.462118] pci 0000:00:02.0: reg 0x18: [mem 0xb0000000-0xbfffffff 64bit pref]
[    1.462122] pci 0000:00:02.0: reg 0x20: [io  0x5050-0x5057]
[    1.462225] pci 0000:00:16.0: [8086:3b64] type 00 class 0x078000
[    1.462253] pci 0000:00:16.0: reg 0x10: [mem 0xc4504000-0xc450400f 64bit]
[    1.462346] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    1.462430] pci 0000:00:1a.0: [8086:3b3c] type 00 class 0x0c0320
[    1.462844] pci 0000:00:1a.0: reg 0x10: [mem 0xc450a000-0xc450a3ff]
[    1.465285] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    1.465342] pci 0000:00:1a.0: System wakeup disabled by ACPI
[    1.465384] pci 0000:00:1b.0: [8086:3b56] type 00 class 0x040300
[    1.465404] pci 0000:00:1b.0: reg 0x10: [mem 0xc4500000-0xc4503fff 64bit]
[    1.465500] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    1.465545] pci 0000:00:1b.0: System wakeup disabled by ACPI
[    1.465580] pci 0000:00:1c.0: [8086:3b42] type 01 class 0x060400
[    1.465677] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    1.465723] pci 0000:00:1c.0: System wakeup disabled by ACPI
[    1.465756] pci 0000:00:1c.1: [8086:3b44] type 01 class 0x060400
[    1.465853] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    1.465899] pci 0000:00:1c.1: System wakeup disabled by ACPI
[    1.465946] pci 0000:00:1d.0: [8086:3b34] type 00 class 0x0c0320
[    1.466360] pci 0000:00:1d.0: reg 0x10: [mem 0xc4509000-0xc45093ff]
[    1.468800] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    1.468856] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    1.468891] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[    1.468992] pci 0000:00:1e.0: System wakeup disabled by ACPI
[    1.469026] pci 0000:00:1f.0: [8086:3b09] type 00 class 0x060100
[    1.469192] pci 0000:00:1f.2: [8086:3b29] type 00 class 0x010601
[    1.469218] pci 0000:00:1f.2: reg 0x10: [io  0x5048-0x504f]
[    1.469229] pci 0000:00:1f.2: reg 0x14: [io  0x505c-0x505f]
[    1.469239] pci 0000:00:1f.2: reg 0x18: [io  0x5040-0x5047]
[    1.469250] pci 0000:00:1f.2: reg 0x1c: [io  0x5058-0x505b]
[    1.469261] pci 0000:00:1f.2: reg 0x20: [io  0x5020-0x503f]
[    1.469272] pci 0000:00:1f.2: reg 0x24: [mem 0xc4508000-0xc45087ff]
[    1.469336] pci 0000:00:1f.2: PME# supported from D3hot
[    1.469405] pci 0000:00:1f.3: [8086:3b30] type 00 class 0x0c0500
[    1.469425] pci 0000:00:1f.3: reg 0x10: [mem 0xc4506000-0xc45060ff 64bit]
[    1.469455] pci 0000:00:1f.3: reg 0x20: [io  0x5000-0x501f]
[    1.469543] pci 0000:00:1f.6: [8086:3b32] type 00 class 0x118000
[    1.469570] pci 0000:00:1f.6: reg 0x10: [mem 0xc4507000-0xc4507fff 64bit]
[    1.469761] pci 0000:01:00.0: [1002:68c1] type 00 class 0x030000
[    1.469775] pci 0000:01:00.0: reg 0x10: [mem 0xa0000000-0xafffffff 64bit pref]
[    1.469785] pci 0000:01:00.0: reg 0x18: [mem 0xc4400000-0xc441ffff 64bit]
[    1.469792] pci 0000:01:00.0: reg 0x20: [io  0x4000-0x40ff]
[    1.469803] pci 0000:01:00.0: reg 0x30: [mem 0xfffe0000-0xffffffff pref]
[    1.469840] pci 0000:01:00.0: supports D1 D2
[    1.469884] pci 0000:01:00.1: [1002:aa60] type 00 class 0x040300
[    1.469899] pci 0000:01:00.1: reg 0x10: [mem 0xc4420000-0xc4423fff 64bit]
[    1.469966] pci 0000:01:00.1: supports D1 D2
[    1.470024] pci 0000:00:01.0: PCI bridge to [bus 01]
[    1.470027] pci 0000:00:01.0:   bridge window [io  0x4000-0x4fff]
[    1.470029] pci 0000:00:01.0:   bridge window [mem 0xc4400000-0xc44fffff]
[    1.470032] pci 0000:00:01.0:   bridge window [mem 0xa0000000-0xafffffff 64bit pref]
[    1.470151] pci 0000:02:00.0: [8086:0084] type 00 class 0x028000
[    1.470195] pci 0000:02:00.0: reg 0x10: [mem 0xc3400000-0xc3401fff 64bit]
[    1.470407] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[    1.480075] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    1.480083] pci 0000:00:1c.0:   bridge window [io  0x3000-0x3fff]
[    1.480090] pci 0000:00:1c.0:   bridge window [mem 0xc3400000-0xc43fffff]
[    1.480101] pci 0000:00:1c.0:   bridge window [mem 0xc0400000-0xc13fffff 64bit pref]
[    1.480205] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
[    1.480221] pci 0000:03:00.0: reg 0x10: [io  0x2000-0x20ff]
[    1.480247] pci 0000:03:00.0: reg 0x18: [mem 0xc1404000-0xc1404fff 64bit pref]
[    1.480264] pci 0000:03:00.0: reg 0x20: [mem 0xc1400000-0xc1403fff 64bit pref]
[    1.480276] pci 0000:03:00.0: reg 0x30: [mem 0xffff0000-0xffffffff pref]
[    1.480339] pci 0000:03:00.0: supports D1 D2
[    1.480340] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    1.480382] pci 0000:03:00.0: System wakeup disabled by ACPI
[    1.490020] pci 0000:00:1c.1: PCI bridge to [bus 03]
[    1.490028] pci 0000:00:1c.1:   bridge window [io  0x2000-0x2fff]
[    1.490035] pci 0000:00:1c.1:   bridge window [mem 0xc2400000-0xc33fffff]
[    1.490046] pci 0000:00:1c.1:   bridge window [mem 0xc1400000-0xc23fffff 64bit pref]
[    1.490160] pci 0000:00:1e.0: PCI bridge to [bus 04] (subtractive decode)
[    1.490173] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
[    1.490174] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
[    1.490176] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    1.490177] pci 0000:00:1e.0:   bridge window [mem 0xa0000000-0xfeafffff] (subtractive decode)
[    1.490618] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[    1.490666] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[    1.490712] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[    1.490761] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[    1.490808] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[    1.490854] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[    1.490902] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[    1.490948] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[    1.693626] ACPI: PCI Root Bridge [CPBG] (domain 0000 [bus 7f])
[    1.693629] acpi PNP0A03:00: ACPI _OSC support notification failed, disabling PCIe ASPM
[    1.693631] acpi PNP0A03:00: Unable to request _OSC control (_OSC support mask: 0x08)
[    1.693691] PCI host bridge to bus 0000:7f
[    1.693694] pci_bus 0000:7f: root bus resource [bus 7f]
[    1.693698] pci 0000:7f:00.0: [8086:2c62] type 00 class 0x060000
[    1.693735] pci 0000:7f:00.1: [8086:2d01] type 00 class 0x060000
[    1.693774] pci 0000:7f:02.0: [8086:2d10] type 00 class 0x060000
[    1.693808] pci 0000:7f:02.1: [8086:2d11] type 00 class 0x060000
[    1.693841] pci 0000:7f:02.2: [8086:2d12] type 00 class 0x060000
[    1.693875] pci 0000:7f:02.3: [8086:2d13] type 00 class 0x060000
[    1.694220] ACPI: Enabled 7 GPEs in block 00 to 3F
[    1.694226] ACPI: \_SB_.PCI0: notify handler is installed
[    1.694261] ACPI: \_SB_.CPBG: notify handler is installed
[    1.694272] Found 2 acpi root devices
[    1.694307] ACPI: EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62
[    1.694393] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    1.694397] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none
[    1.694399] vgaarb: loaded
[    1.694400] vgaarb: bridge control possible 0000:01:00.0
[    1.694401] vgaarb: no bridge control possible 0000:00:02.0
[    1.694436] PCI: Using ACPI for IRQ routing
[    1.699238] PCI: pci_cache_line_size set to 64 bytes
[    1.699337] e820: reserve RAM buffer [mem 0x0009d000-0x0009ffff]
[    1.699339] e820: reserve RAM buffer [mem 0x9b63f000-0x9bffffff]
[    1.699340] e820: reserve RAM buffer [mem 0x9b800000-0x9bffffff]
[    1.699428] NetLabel: Initializing
[    1.699429] NetLabel:  domain hash size = 128
[    1.699430] NetLabel:  protocols = UNLABELED CIPSOv4
[    1.699443] NetLabel:  unlabeled traffic allowed by default
[    1.699467] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    1.699472] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    1.701500] Switched to clocksource hpet
[    1.705449] pnp: PnP ACPI init
[    1.705466] ACPI: bus type PNP registered
[    1.705591] pnp 00:00: [dma 4]
[    1.705621] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
[    1.705641] pnp 00:01: Plug and Play ACPI device, IDs INT0800 (active)
[    1.705757] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
[    1.705791] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
[    1.705846] system 00:04: [io  0x0680-0x069f] has been reserved
[    1.705848] system 00:04: [io  0x0800-0x080f] has been reserved
[    1.705850] system 00:04: [io  0xffff] has been reserved
[    1.705852] system 00:04: [io  0xffff] has been reserved
[    1.705853] system 00:04: [io  0x0400-0x047f] could not be reserved
[    1.705855] system 00:04: [io  0x0500-0x057f] has been reserved
[    1.705857] system 00:04: [io  0x164e-0x164f] has been reserved
[    1.705858] system 00:04: [io  0x0380-0x038e] has been reserved
[    1.705861] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.705887] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[    1.705918] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active)
[    1.705955] pnp 00:07: Plug and Play ACPI device, IDs SYN1e1d SYN1e00 SYN0002 PNP0f13 (active)
[    1.706069] pnp 00:08: Plug and Play ACPI device, IDs HPQ0004 (active)
[    1.706268] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    1.706270] system 00:09: [mem 0xfed10000-0xfed13fff] has been reserved
[    1.706272] system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved
[    1.706274] system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved
[    1.706275] system 00:09: [mem 0xf0000000-0xf1ffffff] has been reserved
[    1.706277] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved
[    1.706281] system 00:09: [mem 0xff000000-0xffffffff] could not be reserved
[    1.706283] system 00:09: [mem 0xfee00000-0xfeefffff] could not be reserved
[    1.706285] system 00:09: [mem 0xc4600000-0xc4600fff] has been reserved
[    1.706287] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.905114] pnp: PnP ACPI: found 10 devices
[    1.905115] ACPI: bus type PNP unregistered
[    1.911635] pci 0000:01:00.0: no compatible bridge window for [mem 0xfffe0000-0xffffffff pref]
[    1.911639] pci 0000:03:00.0: no compatible bridge window for [mem 0xffff0000-0xffffffff pref]
[    1.911677] pci 0000:01:00.0: BAR 6: assigned [mem 0xc4440000-0xc445ffff pref]
[    1.911680] pci 0000:00:01.0: PCI bridge to [bus 01]
[    1.911682] pci 0000:00:01.0:   bridge window [io  0x4000-0x4fff]
[    1.911685] pci 0000:00:01.0:   bridge window [mem 0xc4400000-0xc44fffff]
[    1.911687] pci 0000:00:01.0:   bridge window [mem 0xa0000000-0xafffffff 64bit pref]
[    1.911691] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    1.911694] pci 0000:00:1c.0:   bridge window [io  0x3000-0x3fff]
[    1.911699] pci 0000:00:1c.0:   bridge window [mem 0xc3400000-0xc43fffff]
[    1.911704] pci 0000:00:1c.0:   bridge window [mem 0xc0400000-0xc13fffff 64bit pref]
[    1.911711] pci 0000:03:00.0: BAR 6: assigned [mem 0xc1410000-0xc141ffff pref]
[    1.911713] pci 0000:00:1c.1: PCI bridge to [bus 03]
[    1.911716] pci 0000:00:1c.1:   bridge window [io  0x2000-0x2fff]
[    1.911721] pci 0000:00:1c.1:   bridge window [mem 0xc2400000-0xc33fffff]
[    1.911726] pci 0000:00:1c.1:   bridge window [mem 0xc1400000-0xc23fffff 64bit pref]
[    1.911733] pci 0000:00:1e.0: PCI bridge to [bus 04]
[    1.911747] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    1.911749] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    1.911750] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    1.911752] pci_bus 0000:00: resource 7 [mem 0xa0000000-0xfeafffff]
[    1.911753] pci_bus 0000:01: resource 0 [io  0x4000-0x4fff]
[    1.911755] pci_bus 0000:01: resource 1 [mem 0xc4400000-0xc44fffff]
[    1.911756] pci_bus 0000:01: resource 2 [mem 0xa0000000-0xafffffff 64bit pref]
[    1.911758] pci_bus 0000:02: resource 0 [io  0x3000-0x3fff]
[    1.911760] pci_bus 0000:02: resource 1 [mem 0xc3400000-0xc43fffff]
[    1.911761] pci_bus 0000:02: resource 2 [mem 0xc0400000-0xc13fffff 64bit pref]
[    1.911763] pci_bus 0000:03: resource 0 [io  0x2000-0x2fff]
[    1.911764] pci_bus 0000:03: resource 1 [mem 0xc2400000-0xc33fffff]
[    1.911766] pci_bus 0000:03: resource 2 [mem 0xc1400000-0xc23fffff 64bit pref]
[    1.911767] pci_bus 0000:04: resource 4 [io  0x0000-0x0cf7]
[    1.911769] pci_bus 0000:04: resource 5 [io  0x0d00-0xffff]
[    1.911770] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
[    1.911772] pci_bus 0000:04: resource 7 [mem 0xa0000000-0xfeafffff]
[    1.911805] NET: Registered protocol family 2
[    1.912015] TCP established hash table entries: 65536 (order: 8, 1048576 bytes)
[    1.912263] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    1.912459] TCP: Hash tables configured (established 65536 bind 65536)
[    1.912493] TCP: reno registered
[    1.912506] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    1.912542] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    1.912641] NET: Registered protocol family 1
[    1.912657] pci 0000:00:02.0: Boot video device
[    1.938251] PCI: CLS 64 bytes, default 64
[    1.938297] Unpacking initramfs...
[    1.987010] Freeing initrd memory: 2960K (ffff880037a28000 - ffff880037d0c000)
[    1.987017] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    1.987019] software IO TLB [mem 0x9763f000-0x9b63f000] (64MB) mapped at [ffff88009763f000-ffff88009b63efff]
[    1.987050] Simple Boot Flag at 0x44 set to 0x1
[    1.987234] Scanning for low memory corruption every 60 seconds
[    1.987523] audit: initializing netlink socket (disabled)
[    1.987536] type=2000 audit(1390630458.423:1): initialized
[    1.998005] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    1.999257] zbud: loaded
[    1.999421] VFS: Disk quotas dquot_6.5.2
[    1.999457] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.999614] msgmni has been set to 15569
[    1.999955] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    2.000004] io scheduler noop registered
[    2.000006] io scheduler deadline registered
[    2.000029] io scheduler cfq registered (default)
[    2.000219] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[    2.000474] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    2.000487] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    2.000526] vesafb: mode is 1600x900x32, linelength=6400, pages=0
[    2.000528] vesafb: scrolling: redraw
[    2.000529] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    2.000872] vesafb: framebuffer at 0xb0000000, mapped to 0xffffc90008f00000, using 5632k, total 5632k
[    2.208493] Console: switching to colour frame buffer device 200x56
[    2.415572] fb0: VESA VGA frame buffer device
[    2.415583] intel_idle: MWAIT substates: 0x1120
[    2.415585] intel_idle: v0.4 model 0x25
[    2.415585] intel_idle: lapic_timer_reliable_states 0xffffffff
[    2.415721] GHES: HEST is not enabled!
[    2.415778] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    2.416220] Linux agpgart interface v0.103
[    2.416282] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    2.437802] serio: i8042 KBD port at 0x60,0x64 irq 1
[    2.437825] serio: i8042 AUX port at 0x60,0x64 irq 12
[    2.437928] mousedev: PS/2 mouse device common for all mice
[    2.439572] rtc_cmos 00:05: RTC can wake from S4
[    2.439720] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[    2.439752] rtc_cmos 00:05: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    2.439804] drop_monitor: Initializing network drop monitor service
[    2.439867] TCP: cubic registered
[    2.439942] NET: Registered protocol family 10
[    2.440100] NET: Registered protocol family 17
[    2.440110] Key type dns_resolver registered
[    2.440362] registered taskstats version 1
[    2.441127]   Magic number: 14:648:216
[    2.441252] rtc_cmos 00:05: setting system clock to 2014-01-25 06:14:19 UTC (1390630459)
[    2.441297] PM: Hibernation image not present or could not be loaded.
[    2.442333] Freeing unused kernel memory: 1144K (ffffffff818cb000 - ffffffff819e9000)
[    2.442335] Write protecting the kernel read-only data: 8192k
[    2.444650] Freeing unused kernel memory: 1016K (ffff880001502000 - ffff880001600000)
[    2.445600] Freeing unused kernel memory: 420K (ffff880001797000 - ffff880001800000)
[    2.458198] systemd-udevd[57]: starting version 208
[    2.466960] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    2.485606] SCSI subsystem initialized
[    2.487357] ACPI: bus type USB registered
[    2.487410] usbcore: registered new interface driver usbfs
[    2.487487] libata version 3.00 loaded.
[    2.487522] usbcore: registered new interface driver hub
[    2.487576] usbcore: registered new device driver usb
[    2.488154] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.488305] ehci-pci: EHCI PCI platform driver
[    2.488453] ehci-pci 0000:00:1a.0: setting latency timer to 64
[    2.488473] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    2.488484] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    2.488507] ehci-pci 0000:00:1a.0: debug port 2
[    2.492709] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    2.492734] ehci-pci 0000:00:1a.0: irq 16, io mem 0xc450a000
[    2.501178] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    2.501456] hub 1-0:1.0: USB hub found
[    2.501468] hub 1-0:1.0: 3 ports detected
[    2.501772] ehci-pci 0000:00:1d.0: setting latency timer to 64
[    2.501779] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    2.501786] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    2.501801] ehci-pci 0000:00:1d.0: debug port 2
[    2.505713] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    2.505733] ehci-pci 0000:00:1d.0: irq 21, io mem 0xc4509000
[    2.514513] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    2.514735] hub 2-0:1.0: USB hub found
[    2.514741] hub 2-0:1.0: 3 ports detected
[    2.514993] ahci 0000:00:1f.2: version 3.0
[    2.515120] ahci 0000:00:1f.2: irq 41 for MSI/MSI-X
[    2.515225] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 3 Gbps 0x33 impl SATA mode
[    2.515229] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems sxs apst 
[    2.515236] ahci 0000:00:1f.2: setting latency timer to 64
[    2.535192] scsi0 : ahci
[    2.535558] scsi1 : ahci
[    2.535764] scsi2 : ahci
[    2.535955] scsi3 : ahci
[    2.536149] scsi4 : ahci
[    2.536359] scsi5 : ahci
[    2.536451] ata1: SATA max UDMA/133 abar m2048@0xc4508000 port 0xc4508100 irq 41
[    2.536457] ata2: SATA max UDMA/133 abar m2048@0xc4508000 port 0xc4508180 irq 41
[    2.536459] ata3: DUMMY
[    2.536462] ata4: DUMMY
[    2.536467] ata5: SATA max UDMA/133 abar m2048@0xc4508000 port 0xc4508300 irq 41
[    2.536471] ata6: SATA max UDMA/133 abar m2048@0xc4508000 port 0xc4508380 irq 41
[    2.807839] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    2.854462] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.854564] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.854611] ata6: SATA link down (SStatus 0 SControl 300)
[    2.854735] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.856919] ata2.00: ATAPI: hp BD-ROM BC-5501H, 2.90, max UDMA/100
[    2.859217] ata2.00: configured for UDMA/100
[    2.861881] ata1.00: ATA-8: Corsair CSSD-F60GB2, 2.0, max UDMA/133
[    2.861886] ata1.00: 117231408 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    2.871886] ata1.00: configured for UDMA/133
[    2.872196] scsi 0:0:0:0: Direct-Access     ATA      Corsair CSSD-F60 2.0  PQ: 0 ANSI: 5
[    2.873244] scsi 1:0:0:0: CD-ROM            hp       BD ROM BC-5501H  2.90 PQ: 0 ANSI: 5
[    2.903929] ata5.00: ATA-8: TOSHIBA MK5075GSX, GT001U, max UDMA/100
[    2.903933] ata5.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    2.905148] ata5.00: configured for UDMA/100
[    2.905285] scsi 4:0:0:0: Direct-Access     ATA      TOSHIBA MK5075GS GT00 PQ: 0 ANSI: 5
[    2.909966] sd 0:0:0:0: [sda] 117231408 512-byte logical blocks: (60.0 GB/55.8 GiB)
[    2.910041] sd 0:0:0:0: [sda] Write Protect is off
[    2.910048] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.910091] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.910499] sd 4:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[    2.910501] sd 4:0:0:0: [sdb] 4096-byte physical blocks
[    2.910526] sd 4:0:0:0: [sdb] Write Protect is off
[    2.910528] sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    2.910540] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.910633]  sda: sda1 sda2 sda3 sda4
[    2.911010] sr0: scsi3-mmc drive: 62x/62x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.911016] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.911095] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.911204] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    2.932118] hub 1-1:1.0: USB hub found
[    2.932226] hub 1-1:1.0: 6 ports detected
[    2.953159]  sdb: sdb1 sdb3
[    2.953757] sd 4:0:0:0: [sdb] Attached SCSI disk
[    2.987624] tsc: Refined TSC clocksource calibration: 2527.285 MHz
[    3.037677] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    3.161529] hub 2-1:1.0: USB hub found
[    3.161615] hub 2-1:1.0: 8 ports detected
[    3.241106] usb 1-1.2: new low-speed USB device number 3 using ehci-pci
[    3.333324] hidraw: raw HID events driver (C) Jiri Kosina
[    3.336248] usbcore: registered new interface driver usbhid
[    3.336250] usbhid: USB HID core driver
[    3.336850] input: Microsoft  Microsoft Basic Optical Mouse v2.0  as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input2
[    3.337086] hid-generic 0003:045E:00CB.0001: input,hidraw0: USB HID v1.11 Mouse [Microsoft  Microsoft Basic Optical Mouse v2.0 ] on usb-0000:00:1a.0-1.2/input0
[    3.397519] usb 1-1.6: new full-speed USB device number 4 using ehci-pci
[    3.486816] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
[    3.546180] systemd[1]: systemd 208 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
[    3.548701] systemd[1]: Set hostname to <HP-DV7>.
[    3.553751] systemd-fstab-generator[119]: Mount point swap is not a valid path, ignoring.
[    3.564291] usb 2-1.1: new high-speed USB device number 3 using ehci-pci
[    3.601149] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
[    3.601160] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
[    3.601361] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[    3.601419] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    3.601433] systemd[1]: Starting Remote File Systems.
[    3.602633] systemd[1]: Reached target Remote File Systems.
[    3.602645] systemd[1]: Starting Device-mapper event daemon FIFOs.
[    3.604045] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[    3.604055] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[    3.605524] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    3.605534] systemd[1]: Starting Delayed Shutdown Socket.
[    3.606751] systemd[1]: Listening on Delayed Shutdown Socket.
[    3.606760] systemd[1]: Starting LVM2 metadata daemon socket.
[    3.608067] systemd[1]: Listening on LVM2 metadata daemon socket.
[    3.608103] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[    3.610164] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    3.610180] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[    3.610209] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    3.610218] systemd[1]: Starting Paths.
[    3.611135] systemd[1]: Reached target Paths.
[    3.611150] systemd[1]: Starting udev Kernel Socket.
[    3.612271] systemd[1]: Listening on udev Kernel Socket.
[    3.612284] systemd[1]: Starting udev Control Socket.
[    3.613423] systemd[1]: Listening on udev Control Socket.
[    3.613435] systemd[1]: Starting Journal Socket.
[    3.614518] systemd[1]: Listening on Journal Socket.
[    3.614535] systemd[1]: Starting udev Coldplug all Devices...
[    3.616439] systemd[1]: Starting Apply Kernel Variables...
[    3.617780] systemd[1]: Mounting Huge Pages File System...
[    3.619103] systemd[1]: Mounting POSIX Message Queue File System...
[    3.622065] systemd[1]: Starting Load Kernel Modules...
[    3.626618] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[    3.629265] systemd[1]: Starting Set Up Additional Binary Formats...
[    3.630812] systemd[1]: Starting Journal Service...
[    3.633257] systemd[1]: Started Journal Service.
[    3.643151] systemd-journald[134]: Vacuuming done, freed 0 bytes
[    3.643416] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
[    3.643422] ACPI: Power Button [PWRB]
[    3.643483] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input4
[    3.643552] EXT4-fs (sda4): re-mounted. Opts: discard
[    3.643855] ACPI: Lid Switch [LID0]
[    3.643927] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[    3.643930] ACPI: Power Button [PWRF]
[    3.644676] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com>
[    3.644679] AMD IOMMUv2 functionality not available on this system
[    3.705533] systemd-udevd[157]: starting version 208
[    3.714133] usb 2-1.3: new full-speed USB device number 4 using ehci-pci
[    3.723418] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[    3.723419] Disabling lock debugging due to kernel taint
[    3.734452] <6>[fglrx] Maximum main memory to use for locked dma buffers: 7558 MBytes.
[    3.734648] <6>[fglrx]   vendor: 1002 device: 68c1 count: 1
[    3.734918] <6>[fglrx] ioport: bar 4, base 0x4000, size: 0x100
[    3.734926] pci 0000:01:00.0: enabling device (0000 -> 0003)
[    3.735095] <6>[fglrx] Kernel PAT support is enabled
[    3.735114] <6>[fglrx] module loaded - fglrx 13.25.5 [Dec  6 2013] with 1 minors
[    3.783368] ACPI: Requesting acpi_cpufreq
[    3.784868] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    3.785719] agpgart-intel 0000:00:00.0: Intel HD Graphics Chipset
[    3.785798] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[    3.786504] agpgart-intel 0000:00:00.0: detected 32768K stolen memory
[    3.786902] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xb0000000
[    3.787185] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20130725/utaddress-251)
[    3.787188] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    3.787192] ACPI Warning: 0x0000000000000540-0x000000000000054f SystemIO conflicts with Region \GPIO 1 (20130725/utaddress-251)
[    3.787195] ACPI Warning: 0x0000000000000540-0x000000000000054f SystemIO conflicts with Region \SGGP 2 (20130725/utaddress-251)
[    3.787198] ACPI Warning: 0x0000000000000540-0x000000000000054f SystemIO conflicts with Region \_SB_.PCI0.P0P3.PEGP.GPIO 3 (20130725/utaddress-251)
[    3.787198] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    3.787200] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIO 1 (20130725/utaddress-251)
[    3.787203] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \SGGP 2 (20130725/utaddress-251)
[    3.787205] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \_SB_.PCI0.P0P3.PEGP.GPIO 3 (20130725/utaddress-251)
[    3.787206] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    3.787208] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 1 (20130725/utaddress-251)
[    3.787210] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \SGGP 2 (20130725/utaddress-251)
[    3.787213] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \_SB_.PCI0.P0P3.PEGP.GPIO 3 (20130725/utaddress-251)
[    3.787213] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    3.787214] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    3.788226] mei_me 0000:00:16.0: setting latency timer to 64
[    3.788279] mei_me 0000:00:16.0: irq 42 for MSI/MSI-X
[    3.803478] hp_accel: hardware type DV7 found
[    3.804108] lis3lv02d: 8 bits sensor found
[    3.806403] [drm] Initialized drm 1.1.0 20060810
[    3.817825] snd_hda_intel 0000:00:1b.0: irq 43 for MSI/MSI-X
[    3.820698] usb-storage 2-1.1:1.0: USB Mass Storage device detected
[    3.821478] scsi6 : usb-storage 2-1.1:1.0
[    3.822190] usbcore: registered new interface driver usb-storage
[    3.836293] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input6
[    3.840807] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input7
[    3.842785] [Firmware Bug]: Invalid critical threshold (0)
[    3.848265] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    3.848278] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[    3.848284] pcieport 0000:00:1c.1: driver skip pci_set_master, fix it!
[    3.848512] r8169 0000:03:00.0: irq 44 for MSI/MSI-X
[    3.848684] r8169 0000:03:00.0 eth0: RTL8168d/8111d at 0xffffc90000c4e000, 78:ac:c0:41:2a:dc, XID 083000c0 IRQ 44
[    3.848685] r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    3.848994] thermal LNXTHERM:00: registered as thermal_zone0
[    3.848996] ACPI: Thermal Zone [TZ01] (60 C)
[    3.854926] input: HDA Intel MID Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[    3.855035] input: HDA Intel MID Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[    3.855410] hda-intel 0000:01:00.1: Handle VGA-switcheroo audio client
[    3.855479] snd_hda_intel 0000:01:00.1: irq 45 for MSI/MSI-X
[    3.856762] [drm] Memory usable by graphics device = 2048M
[    3.856877] checking generic (b0000000 580000) vs hw (b0000000 10000000)
[    3.856906] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
[    3.861908] cfg80211: Calling CRDA to update world regulatory domain
[    3.867315] usb 2-1.5: new high-speed USB device number 5 using ehci-pci
[    3.872505] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input10
[    3.873734] Intel(R) Wireless WiFi driver for Linux, in-tree:
[    3.873734] Copyright(c) 2003-2013 Intel Corporation
[    3.873811] pcieport 0000:00:1c.0: driver skip pci_set_master, fix it!
[    3.875297] iwlwifi 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
[    3.875446] iwlwifi 0000:02:00.0: irq 46 for MSI/MSI-X
[    3.879450] iwlwifi 0000:02:00.0: loaded firmware version 39.31.5.1 build 35138 op_mode iwldvm
[    3.879788] Bluetooth: Core ver 2.16
[    3.881003] NET: Registered protocol family 31
[    3.881005] Bluetooth: HCI device and connection manager initialized
[    3.881016] Bluetooth: HCI socket layer initialized
[    3.881019] Bluetooth: L2CAP socket layer initialized
[    3.881026] Bluetooth: SCO socket layer initialized
[    3.883938] usbcore: registered new interface driver btusb
[    3.884347] Console: switching to colour dummy device 80x25
[    3.886414] i915 0000:00:02.0: setting latency timer to 64
[    3.892348] ACPI: AC Adapter [ACAD] (on-line)
[    3.906181] systemd-journald[134]: Received request to flush runtime journal from PID 1
[    3.910134] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUG disabled
[    3.910140] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUGFS disabled
[    3.910142] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled
[    3.910145] iwlwifi 0000:02:00.0: Detected Intel(R) Centrino(R) Wireless-N 1000 BGN, REV=0x6C
[    3.910257] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
[    3.930630] i915 0000:00:02.0: irq 47 for MSI/MSI-X
[    3.930654] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[    3.930656] [drm] Driver supports precise vblank timestamp query.
[    3.931084] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=none:owns=none
[    3.934147] input: PC Speaker as /devices/platform/pcspkr/input/input11
[    3.936986] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[    3.950834] microcode: CPU0 sig=0x20655, pf=0x10, revision=0x2
[    3.966690] fbcon: inteldrmfb (fb0) is primary device
[    3.987780] Switched to clocksource tsc
[    3.996141] iTCO_vendor_support: vendor-support=0
[    3.996902] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
[    3.996972] iTCO_wdt: Found a HM55 TCO device (Version=2, TCOBASE=0x0460)
[    3.997186] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    4.022206] systemd-udevd[171]: renamed network interface eth0 to enp3s0
[    4.023553] cfg80211: World regulatory domain updated:
[    4.023554] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[    4.023555] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[    4.023556] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[    4.023557] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm)
[    4.023558] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm)
[    4.023558] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm)
[    4.023559] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)
[    4.080995] microcode: CPU1 sig=0x20655, pf=0x10, revision=0x2
[    4.098822] microcode: CPU2 sig=0x20655, pf=0x10, revision=0x2
[    4.099319] microcode: CPU3 sig=0x20655, pf=0x10, revision=0x2
[    4.099803] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    4.100209] ACPI: Battery Slot [BAT0] (battery present)
[    4.100361] wmi: Mapper loaded
[    4.103136] input: HP WMI hotkeys as /devices/virtual/input/input13
[    4.104748] systemd-udevd[164]: renamed network interface wlan0 to wlo1
[    4.125347] kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround
[    4.240631] media: Linux media interface: v0.10
[    4.244154] Linux video capture interface: v2.00
[    4.252000] uvcvideo: Found UVC 1.00 device HP Webcam (064e:f209)
[    4.257341] input: HP Webcam as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/input/input14
[    4.257488] usbcore: registered new interface driver uvcvideo
[    4.257489] USB Video Class driver (1.1.1)
[    4.770357] Console: switching to colour frame buffer device 200x56
[    4.778627] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    4.778629] i915 0000:00:02.0: registered panic notifier
[    4.785739] acpi device:02: registered as cooling_device5
[    4.785956] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    4.786022] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input15
[    4.797354] acpi device:14: registered as cooling_device6
[    4.802976] acpi device:15: registered as cooling_device7
[    4.803025] ACPI: Video Device [VGA1] (multi-head: yes  rom: no  post: no)
[    4.803087] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:11/LNXVIDEO:02/input/input16
[    4.803440] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[    4.803977] intel ips 0000:00:1f.6: CPU TDP doesn't match expected value (found 25, expected 29)
[    4.805256] intel ips 0000:00:1f.6: IPS driver initialized, MCP temp limit 90
[    4.805400] ACPI Warning: 0x0000000000005000-0x000000000000501f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20130725/utaddress-251)
[    4.805408] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    4.824848] scsi 6:0:0:0: Direct-Access     SanDisk  Cruzer Glide     1.26 PQ: 0 ANSI: 5
[    4.827187] sd 6:0:0:0: [sdc] 31266816 512-byte logical blocks: (16.0 GB/14.9 GiB)
[    4.828646] sd 6:0:0:0: [sdc] Write Protect is off
[    4.828651] sd 6:0:0:0: [sdc] Mode Sense: 43 00 00 00
[    4.830784] sd 6:0:0:0: [sdc] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[    4.839857]  sdc: sdc1
[    4.843514] sd 6:0:0:0: [sdc] Attached SCSI removable disk
[    4.894625] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
[    4.902120] iwlwifi 0000:02:00.0: Radio type=0x0-0x0-0x3
[    4.937012] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
[    4.944514] iwlwifi 0000:02:00.0: Radio type=0x0-0x0-0x3
[    4.978524] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
[    5.038118] r8169 0000:03:00.0 enp3s0: link down
[    5.038174] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[    5.376682] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.4, id: 0x1e0b1, caps: 0xd04773/0xe40000/0x5a0400, board id: 3655, fw id: 631163
[    5.470179] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input12
[    5.851763] wlo1: authenticate with 04:a1:51:18:3f:5a
[    5.865752] wlo1: send auth to 04:a1:51:18:3f:5a (try 1/3)
[    5.868512] wlo1: authenticated
[    5.869715] wlo1: associate with 04:a1:51:18:3f:5a (try 1/3)
[    5.873551] wlo1: RX AssocResp from 04:a1:51:18:3f:5a (capab=0x411 status=0 aid=2)
[    5.876272] wlo1: associated
[    5.876327] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready
[   38.341494] fuse init (API version 7.22)

Xorg.0.log

[    20.932] 
X.Org X Server 1.14.5
Release Date: 2013-12-12
[    20.932] X Protocol Version 11, Revision 0
[    20.932] Build Operating System: Linux 3.12.6-1-ARCH x86_64 
[    20.932] Current Operating System: Linux HP-DV7 3.12.8-1-ARCH #1 SMP PREEMPT Thu Jan 16 09:16:34 CET 2014 x86_64
[    20.932] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=a303086c-e564-4347-92f1-8ec5ecbdcf85 rw
[    20.932] Build Date: 08 January 2014  01:35:51PM
[    20.932]  
[    20.932] Current version of pixman: 0.32.4
[    20.932] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[    20.932] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    20.932] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Jan 25 01:16:07 2014
[    20.935] (==) Using config directory: "/etc/X11/xorg.conf.d"
[    20.938] (==) No Layout section.  Using the first Screen section.
[    20.938] (==) No screen section available. Using defaults.
[    20.938] (**) |-->Screen "Default Screen Section" (0)
[    20.938] (**) |   |-->Monitor "<default monitor>"
[    20.938] (==) No device specified for screen "Default Screen Section".
	Using the first device section listed.
[    20.938] (**) |   |-->Device "Intel Graphics"
[    20.938] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[    20.938] (==) Automatically adding devices
[    20.938] (==) Automatically enabling devices
[    20.938] (==) Automatically adding GPU devices
[    20.947] (==) FontPath set to:
	/usr/share/fonts/misc/,
	/usr/share/fonts/TTF/,
	/usr/share/fonts/OTF/,
	/usr/share/fonts/Type1/,
	/usr/share/fonts/100dpi/,
	/usr/share/fonts/75dpi/
[    20.947] (**) ModulePath set to "/usr/lib/xorg/modules/updates,/usr/lib/xorg/modules"
[    20.947] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[    20.947] (II) Loader magic: 0x7fac20
[    20.947] (II) Module ABI versions:
[    20.947] 	X.Org ANSI C Emulation: 0.4
[    20.947] 	X.Org Video Driver: 14.1
[    20.947] 	X.Org XInput driver : 19.1
[    20.947] 	X.Org Server Extension : 7.0
[    20.947] (II) xfree86: Adding drm device (/dev/dri/card0)
[    20.948] (--) PCI:*(0:0:2:0) 8086:0046:103c:144b rev 2, Mem @ 0xc0000000/4194304, 0xb0000000/268435456, I/O @ 0x00005050/8
[    20.949] (--) PCI: (0:1:0:0) 1002:68c1:103c:144b rev 0, Mem @ 0xa0000000/268435456, 0xc4400000/131072, I/O @ 0x00004000/256, BIOS @ 0x????????/131072
[    20.949] Initializing built-in extension Generic Event Extension
[    20.949] Initializing built-in extension SHAPE
[    20.949] Initializing built-in extension MIT-SHM
[    20.949] Initializing built-in extension XInputExtension
[    20.949] Initializing built-in extension XTEST
[    20.949] Initializing built-in extension BIG-REQUESTS
[    20.949] Initializing built-in extension SYNC
[    20.949] Initializing built-in extension XKEYBOARD
[    20.949] Initializing built-in extension XC-MISC
[    20.949] Initializing built-in extension SECURITY
[    20.949] Initializing built-in extension XINERAMA
[    20.949] Initializing built-in extension XFIXES
[    20.949] Initializing built-in extension RENDER
[    20.949] Initializing built-in extension RANDR
[    20.949] Initializing built-in extension COMPOSITE
[    20.949] Initializing built-in extension DAMAGE
[    20.949] Initializing built-in extension MIT-SCREEN-SAVER
[    20.950] Initializing built-in extension DOUBLE-BUFFER
[    20.950] Initializing built-in extension RECORD
[    20.950] Initializing built-in extension DPMS
[    20.950] Initializing built-in extension X-Resource
[    20.950] Initializing built-in extension XVideo
[    20.950] Initializing built-in extension XVideo-MotionCompensation
[    20.950] Initializing built-in extension XFree86-VidModeExtension
[    20.950] Initializing built-in extension XFree86-DGA
[    20.950] Initializing built-in extension XFree86-DRI
[    20.950] Initializing built-in extension DRI2
[    20.950] (II) LoadModule: "glx"
[    20.951] (II) Loading /usr/lib/xorg/modules/updates/extensions/libglx.so
[    20.954] (II) Module glx: vendor="Advanced Micro Devices, Inc."
[    20.954] 	compiled for 6.9.0, module version = 1.0.0
[    20.954] Loading extension GLX
[    20.954] (II) LoadModule: "intel"
[    20.955] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[    20.959] (II) Module intel: vendor="X.Org Foundation"
[    20.959] 	compiled for 1.14.2, module version = 2.21.15
[    20.959] 	Module class: X.Org Video Driver
[    20.959] 	ABI class: X.Org Video Driver, version 14.1
[    20.959] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
	i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
	915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
	Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
	GM45, 4 Series, G45/G43, Q45/Q43, G41, B43, HD Graphics,
	HD Graphics 2000, HD Graphics 3000, HD Graphics 2500,
	HD Graphics 4000, HD Graphics P4000, HD Graphics 4600,
	HD Graphics 5000, HD Graphics P4600/P4700, Iris(TM) Graphics 5100,
	HD Graphics 4400, HD Graphics 4200, Iris(TM) Pro Graphics 5200
[    20.960] (++) using VT number 1

[    20.963] (II) intel(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[    20.963] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[    20.963] (==) intel(0): RGB weight 888
[    20.963] (==) intel(0): Default visual is TrueColor
[    20.963] (**) intel(0): Option "AccelMethod" "sna"
[    20.964] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics
[    20.964] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2
[    20.964] (**) intel(0): Framebuffer tiled
[    20.964] (**) intel(0): Pixmaps tiled
[    20.964] (**) intel(0): "Tear free" disabled
[    20.964] (**) intel(0): Forcing per-crtc-pixmaps? no
[    20.964] (II) intel(0): Output LVDS1 has no monitor section
[    20.965] (--) intel(0): found backlight control interface acpi_video0 (type 'firmware')
[    20.965] (II) intel(0): Output VGA1 has no monitor section
[    20.965] (--) intel(0): Output LVDS1 using initial mode 1600x900 on pipe 0
[    20.965] (==) intel(0): DPI set to (96, 96)
[    20.965] (II) Loading sub module "dri2"
[    20.965] (II) LoadModule: "dri2"
[    20.965] (II) Module "dri2" already built-in
[    20.965] (==) Depth 24 pixmap format is 32 bpp
[    20.969] (II) intel(0): SNA initialized with Ironlake (gen5) backend
[    20.969] (==) intel(0): Backing store disabled
[    20.969] (==) intel(0): Silken mouse enabled
[    20.969] (II) intel(0): HW Cursor enabled
[    20.969] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[    20.972] (==) intel(0): DPMS enabled
[    20.972] (II) intel(0): [XvMC] xvmc_vld driver initialized.
[    20.972] (II) intel(0): [DRI2] Setup complete
[    20.972] (II) intel(0): [DRI2]   DRI driver: i965
[    20.972] (II) intel(0): direct rendering: DRI2 Enabled
[    20.972] (==) intel(0): hotplug detection: "enabled"
[    20.972] (--) RandR disabled
[    20.984] (EE) GLX error: Can not get required symbols.
[    20.996] (II) intel(0): switch to mode 1600x900@60.1 on pipe 0 using LVDS1, position (0, 0), rotation normal
[    21.006] (II) intel(0): Setting screen physical size to 423 x 238
[    21.139] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[    21.139] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    21.139] (II) LoadModule: "evdev"
[    21.140] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    21.141] (II) Module evdev: vendor="X.Org Foundation"
[    21.141] 	compiled for 1.14.3, module version = 2.8.2
[    21.141] 	Module class: X.Org XInput Driver
[    21.141] 	ABI class: X.Org XInput driver, version 19.1
[    21.141] (II) Using input driver 'evdev' for 'Power Button'
[    21.141] (**) Power Button: always reports core events
[    21.141] (**) evdev: Power Button: Device: "/dev/input/event4"
[    21.141] (--) evdev: Power Button: Vendor 0 Product 0x1
[    21.141] (--) evdev: Power Button: Found keys
[    21.141] (II) evdev: Power Button: Configuring as keyboard
[    21.141] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5/event4"
[    21.141] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    21.141] (**) Option "xkb_rules" "evdev"
[    21.141] (**) Option "xkb_model" "pc104"
[    21.141] (**) Option "xkb_layout" "us"
[    21.175] (II) config/udev: Adding input device Video Bus (/dev/input/event13)
[    21.175] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    21.175] (II) Using input driver 'evdev' for 'Video Bus'
[    21.175] (**) Video Bus: always reports core events
[    21.175] (**) evdev: Video Bus: Device: "/dev/input/event13"
[    21.175] (--) evdev: Video Bus: Vendor 0 Product 0x6
[    21.175] (--) evdev: Video Bus: Found keys
[    21.175] (II) evdev: Video Bus: Configuring as keyboard
[    21.175] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input15/event13"
[    21.176] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[    21.176] (**) Option "xkb_rules" "evdev"
[    21.176] (**) Option "xkb_model" "pc104"
[    21.176] (**) Option "xkb_layout" "us"
[    21.176] (II) config/udev: Adding input device Video Bus (/dev/input/event14)
[    21.176] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    21.176] (II) Using input driver 'evdev' for 'Video Bus'
[    21.176] (**) Video Bus: always reports core events
[    21.176] (**) evdev: Video Bus: Device: "/dev/input/event14"
[    21.176] (--) evdev: Video Bus: Vendor 0 Product 0x6
[    21.176] (--) evdev: Video Bus: Found keys
[    21.176] (II) evdev: Video Bus: Configuring as keyboard
[    21.177] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:11/LNXVIDEO:02/input/input16/event14"
[    21.177] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[    21.177] (**) Option "xkb_rules" "evdev"
[    21.177] (**) Option "xkb_model" "pc104"
[    21.177] (**) Option "xkb_layout" "us"
[    21.177] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[    21.177] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    21.177] (II) Using input driver 'evdev' for 'Power Button'
[    21.177] (**) Power Button: always reports core events
[    21.177] (**) evdev: Power Button: Device: "/dev/input/event2"
[    21.177] (--) evdev: Power Button: Vendor 0 Product 0x1
[    21.177] (--) evdev: Power Button: Found keys
[    21.177] (II) evdev: Power Button: Configuring as keyboard
[    21.177] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3/event2"
[    21.177] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 9)
[    21.177] (**) Option "xkb_rules" "evdev"
[    21.177] (**) Option "xkb_model" "pc104"
[    21.178] (**) Option "xkb_layout" "us"
[    21.178] (II) config/udev: Adding input device Lid Switch (/dev/input/event3)
[    21.178] (II) No input driver specified, ignoring this device.
[    21.178] (II) This device may have been added with another device file.
[    21.179] (II) config/udev: Adding input device HD-Audio Generic HDMI/DP,pcm=3 (/dev/input/event9)
[    21.179] (II) No input driver specified, ignoring this device.
[    21.179] (II) This device may have been added with another device file.
[    21.179] (II) config/udev: Adding drm device (/dev/dri/card0)
[    21.179] (II) config/udev: Adding input device Microsoft  Microsoft Basic Optical Mouse v2.0  (/dev/input/event1)
[    21.179] (**) Microsoft  Microsoft Basic Optical Mouse v2.0 : Applying InputClass "evdev pointer catchall"
[    21.179] (II) Using input driver 'evdev' for 'Microsoft  Microsoft Basic Optical Mouse v2.0 '
[    21.179] (**) Microsoft  Microsoft Basic Optical Mouse v2.0 : always reports core events
[    21.179] (**) evdev: Microsoft  Microsoft Basic Optical Mouse v2.0 : Device: "/dev/input/event1"
[    21.179] (--) evdev: Microsoft  Microsoft Basic Optical Mouse v2.0 : Vendor 0x45e Product 0xcb
[    21.180] (--) evdev: Microsoft  Microsoft Basic Optical Mouse v2.0 : Found 3 mouse buttons
[    21.180] (--) evdev: Microsoft  Microsoft Basic Optical Mouse v2.0 : Found scroll wheel(s)
[    21.180] (--) evdev: Microsoft  Microsoft Basic Optical Mouse v2.0 : Found relative axes
[    21.180] (--) evdev: Microsoft  Microsoft Basic Optical Mouse v2.0 : Found x and y relative axes
[    21.180] (II) evdev: Microsoft  Microsoft Basic Optical Mouse v2.0 : Configuring as mouse
[    21.180] (II) evdev: Microsoft  Microsoft Basic Optical Mouse v2.0 : Adding scrollwheel support
[    21.180] (**) evdev: Microsoft  Microsoft Basic Optical Mouse v2.0 : YAxisMapping: buttons 4 and 5
[    21.180] (**) evdev: Microsoft  Microsoft Basic Optical Mouse v2.0 : EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    21.180] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input2/event1"
[    21.180] (II) XINPUT: Adding extended input device "Microsoft  Microsoft Basic Optical Mouse v2.0 " (type: MOUSE, id 10)
[    21.180] (II) evdev: Microsoft  Microsoft Basic Optical Mouse v2.0 : initialized for relative axes.
[    21.180] (**) Microsoft  Microsoft Basic Optical Mouse v2.0 : (accel) keeping acceleration scheme 1
[    21.180] (**) Microsoft  Microsoft Basic Optical Mouse v2.0 : (accel) acceleration profile 0
[    21.180] (**) Microsoft  Microsoft Basic Optical Mouse v2.0 : (accel) acceleration factor: 2.000
[    21.180] (**) Microsoft  Microsoft Basic Optical Mouse v2.0 : (accel) acceleration threshold: 4
[    21.181] (II) config/udev: Adding input device Microsoft  Microsoft Basic Optical Mouse v2.0  (/dev/input/mouse0)
[    21.181] (II) No input driver specified, ignoring this device.
[    21.181] (II) This device may have been added with another device file.
[    21.181] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event6)
[    21.181] (II) No input driver specified, ignoring this device.
[    21.181] (II) This device may have been added with another device file.
[    21.181] (II) config/udev: Adding input device HDA Intel MID Mic (/dev/input/event8)
[    21.181] (II) No input driver specified, ignoring this device.
[    21.181] (II) This device may have been added with another device file.
[    21.182] (II) config/udev: Adding input device HDA Intel MID Front Headphone (/dev/input/event7)
[    21.182] (II) No input driver specified, ignoring this device.
[    21.182] (II) This device may have been added with another device file.
[    21.182] (II) config/udev: Adding input device HP Webcam (/dev/input/event11)
[    21.182] (**) HP Webcam: Applying InputClass "evdev keyboard catchall"
[    21.182] (II) Using input driver 'evdev' for 'HP Webcam'
[    21.182] (**) HP Webcam: always reports core events
[    21.182] (**) evdev: HP Webcam: Device: "/dev/input/event11"
[    21.182] (--) evdev: HP Webcam: Vendor 0x64e Product 0xf209
[    21.182] (--) evdev: HP Webcam: Found keys
[    21.182] (II) evdev: HP Webcam: Configuring as keyboard
[    21.182] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/input/input13/event11"
[    21.182] (II) XINPUT: Adding extended input device "HP Webcam" (type: KEYBOARD, id 11)
[    21.182] (**) Option "xkb_rules" "evdev"
[    21.182] (**) Option "xkb_model" "pc104"
[    21.182] (**) Option "xkb_layout" "us"
[    21.183] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[    21.183] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[    21.183] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[    21.183] (**) AT Translated Set 2 keyboard: always reports core events
[    21.183] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[    21.183] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[    21.183] (--) evdev: AT Translated Set 2 keyboard: Found keys
[    21.183] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[    21.183] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[    21.183] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 12)
[    21.183] (**) Option "xkb_rules" "evdev"
[    21.183] (**) Option "xkb_model" "pc104"
[    21.183] (**) Option "xkb_layout" "us"
[    21.184] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event15)
[    21.184] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[    21.184] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[    21.184] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[    21.184] (II) LoadModule: "synaptics"
[    21.184] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[    21.185] (II) Module synaptics: vendor="X.Org Foundation"
[    21.185] 	compiled for 1.15.0, module version = 1.7.3
[    21.185] 	Module class: X.Org XInput Driver
[    21.185] 	ABI class: X.Org XInput driver, version 20.0
[    21.185] (EE) module ABI major version (20) doesn't match the server's version (19)
[    21.185] (II) UnloadModule: "synaptics"
[    21.185] (II) Unloading synaptics
[    21.185] (EE) Failed to load module "synaptics" (module requirement mismatch, 0)
[    21.185] (EE) No input driver matching `synaptics'
[    21.185] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse1)
[    21.185] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[    21.185] (II) config/udev: Adding input device ST LIS3LV02DL Accelerometer (/dev/input/event5)
[    21.185] (II) No input driver specified, ignoring this device.
[    21.185] (II) This device may have been added with another device file.
[    21.185] (II) config/udev: Adding input device ST LIS3LV02DL Accelerometer (/dev/input/js0)
[    21.185] (II) No input driver specified, ignoring this device.
[    21.185] (II) This device may have been added with another device file.
[    21.185] (II) config/udev: Adding input device PC Speaker (/dev/input/event10)
[    21.185] (II) No input driver specified, ignoring this device.
[    21.185] (II) This device may have been added with another device file.
[    21.186] (II) config/udev: Adding input device HP WMI hotkeys (/dev/input/event12)
[    21.186] (**) HP WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[    21.186] (II) Using input driver 'evdev' for 'HP WMI hotkeys'
[    21.186] (**) HP WMI hotkeys: always reports core events
[    21.186] (**) evdev: HP WMI hotkeys: Device: "/dev/input/event12"
[    21.186] (--) evdev: HP WMI hotkeys: Vendor 0 Product 0
[    21.186] (--) evdev: HP WMI hotkeys: Found keys
[    21.186] (II) evdev: HP WMI hotkeys: Configuring as keyboard
[    21.186] (**) Option "config_info" "udev:/sys/devices/virtual/input/input14/event12"
[    21.186] (II) XINPUT: Adding extended input device "HP WMI hotkeys" (type: KEYBOARD, id 13)
[    21.186] (**) Option "xkb_rules" "evdev"
[    21.186] (**) Option "xkb_model" "pc104"
[    21.186] (**) Option "xkb_layout" "us"
[    26.115] (II) evdev: HP WMI hotkeys: Close
[    26.115] (II) UnloadModule: "evdev"
[    26.115] (II) evdev: AT Translated Set 2 keyboard: Close
[    26.115] (II) UnloadModule: "evdev"
[    26.115] (II) evdev: HP Webcam: Close
[    26.115] (II) UnloadModule: "evdev"
[    26.115] (II) evdev: Microsoft  Microsoft Basic Optical Mouse v2.0 : Close
[    26.115] (II) UnloadModule: "evdev"
[    26.115] (II) evdev: Power Button: Close
[    26.115] (II) UnloadModule: "evdev"
[    26.115] (II) evdev: Video Bus: Close
[    26.115] (II) UnloadModule: "evdev"
[    26.115] (II) evdev: Video Bus: Close
[    26.115] (II) UnloadModule: "evdev"
[    26.115] (II) evdev: Power Button: Close
[    26.115] (II) UnloadModule: "evdev"
[    26.131] (EE) Server terminated successfully (0). Closing log file.

Radeon module is blacklisted, and no systemd services are failing.

Last edited by MorningWood (2014-01-25 06:29:40)

MorningWood · 2014-01-26 01:02:15

YES! Started from scratch and followed the same pattern as previous then checked Xorg, which was complaining about nomodeset so I set the nomodeset kernel boot option in grub2. Now I am typing on my perfectly stable KDE setup! Woo.

E: And I thought I was going to be eating my words. Turns out that I inadvertently installed the vesa driver and it was just running that the entire time, ha.
I uninstalled vesa, the intel drivers and catalyst-total-pxp and proceeded to reinstall catalyst-total-pxp which stayed at console (without an xorg.conf configuration). Running aticonfig --initial and the resulting generic xorg.conf file results in freezing at the console. Don't know how to proceed. Maybe a sledgehammer.

E2:This is my current Xorg log:

[     3.831] 
X.Org X Server 1.14.5
Release Date: 2013-12-12
[     3.831] X Protocol Version 11, Revision 0
[     3.831] Build Operating System: Linux 3.12.6-1-ARCH x86_64 
[     3.831] Current Operating System: Linux Archy 3.12.8-1-ARCH #1 SMP PREEMPT Thu Jan 16 09:16:34 CET 2014 x86_64
[     3.831] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=5bb3521b-aa9a-4c06-abfd-44438416a1eb rw quiet nomodeset
[     3.831] Build Date: 08 January 2014  01:35:51PM
[     3.831]  
[     3.831] Current version of pixman: 0.32.4
[     3.831] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[     3.831] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[     3.831] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Jan 25 22:30:59 2014
[     3.832] (==) Using config file: "/etc/X11/xorg.conf"
[     3.832] (==) Using config directory: "/etc/X11/xorg.conf.d"
[     3.836] (==) ServerLayout "aticonfig Layout"
[     3.836] (**) |-->Screen "aticonfig-Screen[0]-0" (0)
[     3.836] (**) |   |-->Monitor "aticonfig-Monitor[0]-0"
[     3.836] (**) |   |-->Device "aticonfig-Device[0]-0"
[     3.836] (==) Automatically adding devices
[     3.836] (==) Automatically enabling devices
[     3.836] (==) Automatically adding GPU devices
[     3.840] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[     3.840] 	Entry deleted from font path.
[     3.840] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[     3.840] 	Entry deleted from font path.
[     3.840] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[     3.840] 	Entry deleted from font path.
[     3.840] 	(Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[     3.841] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[     3.841] 	Entry deleted from font path.
[     3.841] 	(Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[     3.841] (==) FontPath set to:
	/usr/share/fonts/misc/,
	/usr/share/fonts/TTF/
[     3.841] (**) ModulePath set to "/usr/lib/xorg/modules/updates,/usr/lib/xorg/modules"
[     3.841] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[     3.841] (II) Loader magic: 0x7fac20
[     3.841] (II) Module ABI versions:
[     3.841] 	X.Org ANSI C Emulation: 0.4
[     3.841] 	X.Org Video Driver: 14.1
[     3.841] 	X.Org XInput driver : 19.1
[     3.841] 	X.Org Server Extension : 7.0
[     3.841] (II) xfree86: Adding drm device (/dev/dri/card0)
[     4.183] (--) PCI:*(0:0:2:0) 8086:0046:103c:144b rev 2, Mem @ 0xc0000000/4194304, 0xb0000000/268435456, I/O @ 0x00005050/8
[     4.183] (--) PCI: (0:1:0:0) 1002:68c1:103c:144b rev 0, Mem @ 0xa0000000/268435456, 0xc4400000/131072, I/O @ 0x00004000/256, BIOS @ 0x????????/131072
[     4.184] Initializing built-in extension Generic Event Extension
[     4.184] Initializing built-in extension SHAPE
[     4.184] Initializing built-in extension MIT-SHM
[     4.184] Initializing built-in extension XInputExtension
[     4.184] Initializing built-in extension XTEST
[     4.184] Initializing built-in extension BIG-REQUESTS
[     4.184] Initializing built-in extension SYNC
[     4.184] Initializing built-in extension XKEYBOARD
[     4.184] Initializing built-in extension XC-MISC
[     4.184] Initializing built-in extension SECURITY
[     4.184] Initializing built-in extension XINERAMA
[     4.184] Initializing built-in extension XFIXES
[     4.184] Initializing built-in extension RENDER
[     4.184] Initializing built-in extension RANDR
[     4.184] Initializing built-in extension COMPOSITE
[     4.184] Initializing built-in extension DAMAGE
[     4.184] Initializing built-in extension MIT-SCREEN-SAVER
[     4.184] Initializing built-in extension DOUBLE-BUFFER
[     4.184] Initializing built-in extension RECORD
[     4.184] Initializing built-in extension DPMS
[     4.184] Initializing built-in extension X-Resource
[     4.184] Initializing built-in extension XVideo
[     4.184] Initializing built-in extension XVideo-MotionCompensation
[     4.184] Initializing built-in extension XFree86-VidModeExtension
[     4.184] Initializing built-in extension XFree86-DGA
[     4.184] Initializing built-in extension XFree86-DRI
[     4.184] Initializing built-in extension DRI2
[     4.184] (II) "glx" will be loaded by default.
[     4.184] (II) LoadModule: "glx"
[     4.187] (II) Loading /usr/lib/xorg/modules/updates/extensions/libglx.so
[     4.190] (II) Module glx: vendor="Advanced Micro Devices, Inc."
[     4.190] 	compiled for 6.9.0, module version = 1.0.0
[     4.190] Loading extension GLX
[     4.190] (II) LoadModule: "fglrx"
[     4.191] (II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
[     4.244] (II) Module fglrx: vendor="FireGL - AMD Technologies Inc."
[     4.244] 	compiled for 1.4.99.906, module version = 13.25.5
[     4.244] 	Module class: X.Org Video Driver
[     4.245] (II) Loading sub module "fglrxdrm"
[     4.245] (II) LoadModule: "fglrxdrm"
[     4.245] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[     4.248] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
[     4.248] 	compiled for 1.4.99.906, module version = 13.25.5
[     4.248] (II) AMD Proprietary Linux Driver Version Identifier:13.25.5
[     4.248] (II) AMD Proprietary Linux Driver Release Identifier: 13.251                               
[     4.248] (II) AMD Proprietary Linux Driver Build Date: Dec  6 2013 15:19:03
[     4.248] (++) using VT number 7

[     4.551] (WW) Falling back to old probe method for fglrx
[     4.568] (II) Loading PCS database from /etc/ati/amdpcsdb /etc/ati/amdpcsdb.default
[     4.570] ukiDynamicMajor: found major device number 250
[     4.570] ukiDynamicMajor: found major device number 250
[     4.570] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[     4.570] ukiOpenDevice: node name is /dev/ati/card0
[     4.570] ukiOpenDevice: open result is 9, (OK)
[     8.305] ukiOpenByBusid: ukiOpenMinor returns 9
[     8.305] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[     8.309] (--) Chipset Supported AMD Graphics Processor (0x68C1) found
[     8.310] (WW) fglrx: No matching Device section for instance (BusID PCI:0@1:0:1) found
[     8.311] (II) fglrx: intel VGA device detected, load intel driver.
[     8.311] (II) LoadModule: "intel"
[     8.312] (WW) Warning, couldn't open module intel
[     8.312] (II) UnloadModule: "intel"
[     8.312] (II) Unloading intel
[     8.312] (EE) Failed to load module "intel" (module does not exist, 0)
[     8.312] (WW) fglrx: Fail to load intel driver!
[     8.313] (II) fglrx(0): pEnt->device->identifier=0x155e890
[     8.313] (II) fglrx(0): === [xdl_xs114_atiddxPreInit] === begin
[     8.313] (EE) 
[     8.313] (EE) Backtrace:
[     8.314] (EE) 0: /usr/bin/X (xorg_backtrace+0x3d) [0x57e04d]
[     8.315] (EE) 1: /usr/bin/X (0x400000+0x181da9) [0x581da9]
[     8.315] (EE) 2: /usr/lib/libpthread.so.0 (0x7f97ffbc1000+0xf870) [0x7f97ffbd0870]
[     8.315] (EE) 3: /usr/lib/xorg/modules/drivers/fglrx_drv.so (xdl_xs114_atiddxPxPreInit+0xeb) [0x7f97fcc20a4b]
[     8.315] (EE) 4: /usr/lib/xorg/modules/drivers/fglrx_drv.so (xdl_xs114_atiddxPreInit+0x2285) [0x7f97fcbfc1a5]
[     8.315] (EE) 5: /usr/bin/X (InitOutput+0x9cf) [0x47641f]
[     8.315] (EE) 6: /usr/bin/X (0x400000+0x249db) [0x4249db]
[     8.316] (EE) 7: /usr/lib/libc.so.6 (__libc_start_main+0xf5) [0x7f97fea37b05]
[     8.316] (EE) 8: /usr/bin/X (0x400000+0x24f0f) [0x424f0f]
[     8.316] (EE) 
[     8.316] (EE) Segmentation fault at address 0x3b
[     8.316] (EE) 
Fatal server error:
[     8.316] (EE) Caught signal 11 (Segmentation fault). Server aborting
[     8.316] (EE) 
[     8.316] (EE) 
Please consult the The X.Org Foundation support 
	 at http://wiki.x.org
 for help. 
[     8.316] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[     8.316] (EE) 
[     8.620] (EE) Server terminated with error (1). Closing log file.

I see that it's catching a signal 11 because it probably cannot find the AMD device but why exactly is this not a problem with the xf86-ati driver?
And [ 8.310] (WW) fglrx: No matching Device section for instance (BusID PCI:0@1:0:1) found is referring to the HDMI audio connection.
Why is it that when the BusID within xorg.conf is 01:0:0?

Last edited by MorningWood (2014-01-26 03:47:09)

MorningWood · 2014-01-29 04:48:27

So I've noticed that if I activate the "permanent switch" to intel and run with intel + amd drivers (probably with just intel drivers, but haven't tested), I can at least get video through the intel card.
If I remove the intel drivers and do not touch the switch, it obviously automatically searches for intel modules and complains about the lack of.
If active the permanent switch to amd (without intel drivers), and run on amd drivers, it complains that it cannot find intel modules and does nothing.
If I activate the switch to amd (with intel & amd drivers), the drivers complain that it is an A+I setup.

WTF!? I just want this damn thing running already. Why can I not just get the ati card to start on its own? Ideally I'd love to get it to where the amd card runs default and I have the ability to switch to intel a la this example:
https://help.ubuntu.com/community/Binar … d_graphics

Last edited by MorningWood (2014-01-29 04:52:06)

Lone_Wolf · 2014-01-29 14:01:16

This seems to apply to your system :

arch wiki on hybrid graphics wrote:

ATI Dynamic Switchable Graphics
This is a new technology similar to the one of Nvidia. There is no hardware multiplexer and gone into the market a few weeks/months ago.
Current Problems
The Dynamic Switch needs Xorg support for the discrete videocard assigned to rendering [1].
So, the method listed here (and the AUR package related) will not work until Xorg team add support for the redering on a second card not attached to video. See here for more info.
This means that with a muxless intel+ati design, you can't use your discrete card simply modprobing the module as listed down here.
As of now, there are 3 choices:
- Disable the discrete card and use only the intel one. In this case you can folow the instructions below to disable the radeon card.
- Test and improve some virtualGL based program to make the switch, like the common-amd branch of bumblebee project. Check the project repository and this useful post.
- Use the proprietary driver with powerxpress (a.k.a. pxp) support maintained by Vi0l0 (remember to check for xorg compatibility).

(bold / emphasis was added by me ) .

you don't want the first option, and the powerexpress driver can't handle your setup.

It seems you are limited to using the intel driver, and using bumblebee or primus to have specific programs render with the ati card.
I can confirm primus does work with an amd / amd card setup and the opensource radeon drvier, no idea if it can be combined with amd catalyst.

MorningWood · 2014-01-29 15:12:01

Lone_Wolf wrote:

This seems to apply to your system :
arch wiki on hybrid graphics wrote:
ATI Dynamic Switchable Graphics
This is a new technology similar to the one of Nvidia. There is no hardware multiplexer and gone into the market a few weeks/months ago.
Current Problems
The Dynamic Switch needs Xorg support for the discrete videocard assigned to rendering [1].
So, the method listed here (and the AUR package related) will not work until Xorg team add support for the redering on a second card not attached to video. See here for more info.
This means that with a muxless intel+ati design, you can't use your discrete card simply modprobing the module as listed down here.
As of now, there are 3 choices:
- Disable the discrete card and use only the intel one. In this case you can folow the instructions below to disable the radeon card.
- Test and improve some virtualGL based program to make the switch, like the common-amd branch of bumblebee project. Check the project repository and this useful post.
- Use the proprietary driver with powerxpress (a.k.a. pxp) support maintained by Vi0l0 (remember to check for xorg compatibility).
(bold / emphasis was added by me ) .
you don't want the first option, and the powerexpress driver can't handle your setup.
It seems you are limited to using the intel driver, and using bumblebee or primus to have specific programs render with the ati card.
I can confirm primus does work with an amd / amd card setup and the opensource radeon drvier, no idea if it can be combined with amd catalyst.

Lone_Wolf,
Thank you once again your response, Going over the options, it seems that my options are indeed limited. Apparently prime is only supported by the opensource drivers, thus eliminating it. I am in the midst of trying/figuring out bumblebee-amd but my limited knowledge with video/video card configuration is making it a bit cumbersome. I have followed the bumblebee-amd-hacks instructions but nothing happens (so far). I suppose if it comes down to it I will have to run radeon and intel drivers.

Arch Linux

#1 2014-01-07 16:11:33

AMD 5650/Intel switchable graphics setup configuration woes

#2 2014-01-12 23:00:58

Re: AMD 5650/Intel switchable graphics setup configuration woes

#3 2014-01-13 15:58:13

Re: AMD 5650/Intel switchable graphics setup configuration woes

#4 2014-01-18 19:39:24

Re: AMD 5650/Intel switchable graphics setup configuration woes

#5 2014-01-19 04:10:12

Re: AMD 5650/Intel switchable graphics setup configuration woes

#6 2014-01-19 05:13:27

Re: AMD 5650/Intel switchable graphics setup configuration woes

#7 2014-01-19 06:23:56

Re: AMD 5650/Intel switchable graphics setup configuration woes

#8 2014-01-25 05:39:48

Re: AMD 5650/Intel switchable graphics setup configuration woes

#9 2014-01-26 01:02:15

Re: AMD 5650/Intel switchable graphics setup configuration woes

#10 2014-01-29 04:48:27

Re: AMD 5650/Intel switchable graphics setup configuration woes

#11 2014-01-29 14:01:16

Re: AMD 5650/Intel switchable graphics setup configuration woes

#12 2014-01-29 15:12:01

Re: AMD 5650/Intel switchable graphics setup configuration woes

Board footer