You are not logged in.
- Topics: Active | Unanswered
Pages: 1
#1 2014-02-23 22:39:50
- jds02006
- Member
- Registered: 2014-02-23
- Posts: 5
External thunderbolt monitor breaks Xorg
I have a 10,x MBPr, and have been trying to get my external monitor to work for a while now--I've tried desperately to find someone with the same problem as me, but so far haven't had any luck! I'm using rEFInd to boot and Nouveau drivers for display.
If I boot with the thunderbolt/DVI-D adapter plugged in and run startx, X hangs--takes 30 seconds to switch to another virtual terminal--and never outputs to either display.
If I boot without the thunderbolt/DVI-D adapter plugged in and run startx, X works great (for the single monitor).
If I then plug in the adapter, xrandr -q shows the monitor:
DP-1 connected (normal left inverted right x axis y axis)but
xrandr --output DP-1 --primary --right-of eDP-1 --output eDP-1 --autodoesn't have any effect (this doesn't reallly surprise me, as I didn't think Thunderbolt hotplugging worked).
Here's the weird thing--as far as I can tell, the Xorg log doesn't suggest any problems when it hangs after booting with the external monitor (yep, I'm looking at the right one, not the one that overwrites it when I successfully start X!):
[ 15.485]
X.Org X Server 1.15.0
Release Date: 2013-12-27
[ 15.485] X Protocol Version 11, Revision 0
[ 15.485] Build Operating System: Linux 3.12.5-1-ARCH x86_64
[ 15.485] Current Operating System: Linux archraptor 3.13.4-1-ARCH #1 SMP PREEMPT Thu Feb 20 23:54:52 CET 2014 x86_64
[ 15.485] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=c908d3ee-eda7-4b54-a9ad-9c5a5e1a3985 rw quiet rootflags=data=writeback
[ 15.485] Build Date: 09 January 2014 08:47:24AM
[ 15.485]
[ 15.485] Current version of pixman: 0.32.4
[ 15.485] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 15.485] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 15.485] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Feb 23 13:26:19 2014
[ 15.486] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 15.488] (==) No Layout section. Using the first Screen section.
[ 15.488] (==) No screen section available. Using defaults.
[ 15.488] (**) |-->Screen "Default Screen Section" (0)
[ 15.488] (**) | |-->Monitor "<default monitor>"
[ 15.488] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 15.488] (==) Automatically adding devices
[ 15.488] (==) Automatically enabling devices
[ 15.488] (==) Automatically adding GPU devices
[ 15.490] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 15.490] Entry deleted from font path.
[ 15.490] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 15.490] Entry deleted from font path.
[ 15.490] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 15.490] Entry deleted from font path.
[ 15.490] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 15.490] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 15.490] Entry deleted from font path.
[ 15.490] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 15.490] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/
[ 15.490] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 15.490] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 15.490] (II) Loader magic: 0x804c80
[ 15.490] (II) Module ABI versions:
[ 15.490] X.Org ANSI C Emulation: 0.4
[ 15.490] X.Org Video Driver: 15.0
[ 15.490] X.Org XInput driver : 20.0
[ 15.490] X.Org Server Extension : 8.0
[ 15.491] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 15.491] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 15.493] (--) PCI: (0:0:2:0) 8086:0166:106b:00f7 rev 9, Mem @ 0xc1400000/4194304, 0xb0000000/268435456, I/O @ 0x00003000/64
[ 15.493] (--) PCI:*(0:1:0:0) 10de:0fd5:106b:00f2 rev 161, Mem @ 0xc0000000/16777216, 0x90000000/268435456, 0xa0000000/33554432, I/O @ 0x00002000/128, BIOS @ 0x????????/524288
[ 15.493] (II) Open ACPI successful (/var/run/acpid.socket)
[ 15.493] Initializing built-in extension Generic Event Extension
[ 15.493] Initializing built-in extension SHAPE
[ 15.493] Initializing built-in extension MIT-SHM
[ 15.493] Initializing built-in extension XInputExtension
[ 15.493] Initializing built-in extension XTEST
[ 15.493] Initializing built-in extension BIG-REQUESTS
[ 15.493] Initializing built-in extension SYNC
[ 15.493] Initializing built-in extension XKEYBOARD
[ 15.493] Initializing built-in extension XC-MISC
[ 15.493] Initializing built-in extension SECURITY
[ 15.493] Initializing built-in extension XINERAMA
[ 15.493] Initializing built-in extension XFIXES
[ 15.493] Initializing built-in extension RENDER
[ 15.493] Initializing built-in extension RANDR
[ 15.493] Initializing built-in extension COMPOSITE
[ 15.493] Initializing built-in extension DAMAGE
[ 15.493] Initializing built-in extension MIT-SCREEN-SAVER
[ 15.493] Initializing built-in extension DOUBLE-BUFFER
[ 15.493] Initializing built-in extension RECORD
[ 15.493] Initializing built-in extension DPMS
[ 15.493] Initializing built-in extension Present
[ 15.493] Initializing built-in extension DRI3
[ 15.493] Initializing built-in extension X-Resource
[ 15.493] Initializing built-in extension XVideo
[ 15.493] Initializing built-in extension XVideo-MotionCompensation
[ 15.493] Initializing built-in extension XFree86-VidModeExtension
[ 15.493] Initializing built-in extension XFree86-DGA
[ 15.493] Initializing built-in extension XFree86-DRI
[ 15.493] Initializing built-in extension DRI2
[ 15.493] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
[ 15.493] (II) LoadModule: "glx"
[ 15.495] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 15.505] (II) Module glx: vendor="X.Org Foundation"
[ 15.505] compiled for 1.15.0, module version = 1.0.0
[ 15.505] ABI class: X.Org Server Extension, version 8.0
[ 15.505] (==) AIGLX enabled
[ 15.505] Loading extension GLX
[ 15.505] (==) Matched nouveau as autoconfigured driver 0
[ 15.505] (==) Matched nvidia as autoconfigured driver 1
[ 15.505] (==) Matched nv as autoconfigured driver 2
[ 15.505] (==) Matched intel as autoconfigured driver 3
[ 15.505] (==) Matched nouveau as autoconfigured driver 4
[ 15.505] (==) Matched nvidia as autoconfigured driver 5
[ 15.505] (==) Matched nv as autoconfigured driver 6
[ 15.505] (==) Matched modesetting as autoconfigured driver 7
[ 15.505] (==) Matched fbdev as autoconfigured driver 8
[ 15.505] (==) Matched vesa as autoconfigured driver 9
[ 15.505] (==) Assigned the driver to the xf86ConfigLayout
[ 15.505] (II) LoadModule: "nouveau"
[ 15.506] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[ 15.508] (II) Module nouveau: vendor="X.Org Foundation"
[ 15.508] compiled for 1.15.0, module version = 1.0.10
[ 15.508] Module class: X.Org Video Driver
[ 15.508] ABI class: X.Org Video Driver, version 15.0
[ 15.508] (II) LoadModule: "nvidia"
[ 15.509] (WW) Warning, couldn't open module nvidia
[ 15.509] (II) UnloadModule: "nvidia"
[ 15.509] (II) Unloading nvidia
[ 15.509] (EE) Failed to load module "nvidia" (module does not exist, 0)
[ 15.509] (II) LoadModule: "nv"
[ 15.509] (WW) Warning, couldn't open module nv
[ 15.509] (II) UnloadModule: "nv"
[ 15.509] (II) Unloading nv
[ 15.509] (EE) Failed to load module "nv" (module does not exist, 0)
[ 15.509] (II) LoadModule: "intel"
[ 15.510] (WW) Warning, couldn't open module intel
[ 15.510] (II) UnloadModule: "intel"
[ 15.510] (II) Unloading intel
[ 15.510] (EE) Failed to load module "intel" (module does not exist, 0)
[ 15.510] (II) LoadModule: "modesetting"
[ 15.510] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 15.510] (II) Module modesetting: vendor="X.Org Foundation"
[ 15.510] compiled for 1.15.0, module version = 0.8.1
[ 15.510] Module class: X.Org Video Driver
[ 15.510] ABI class: X.Org Video Driver, version 15.0
[ 15.510] (II) LoadModule: "fbdev"
[ 15.511] (WW) Warning, couldn't open module fbdev
[ 15.511] (II) UnloadModule: "fbdev"
[ 15.511] (II) Unloading fbdev
[ 15.511] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 15.511] (II) LoadModule: "vesa"
[ 15.511] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 15.511] (II) Module vesa: vendor="X.Org Foundation"
[ 15.511] compiled for 1.15.0, module version = 2.3.2
[ 15.511] Module class: X.Org Video Driver
[ 15.511] ABI class: X.Org Video Driver, version 15.0
[ 15.511] (II) NOUVEAU driver
[ 15.511] (II) NOUVEAU driver for NVIDIA chipset families :
[ 15.511] RIVA TNT (NV04)
[ 15.511] RIVA TNT2 (NV05)
[ 15.511] GeForce 256 (NV10)
[ 15.511] GeForce 2 (NV11, NV15)
[ 15.511] GeForce 4MX (NV17, NV18)
[ 15.511] GeForce 3 (NV20)
[ 15.511] GeForce 4Ti (NV25, NV28)
[ 15.511] GeForce FX (NV3x)
[ 15.512] GeForce 6 (NV4x)
[ 15.512] GeForce 7 (G7x)
[ 15.512] GeForce 8 (G8x)
[ 15.512] GeForce GTX 200 (NVA0)
[ 15.512] GeForce GTX 400 (NVC0)
[ 15.512] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 15.512] (II) VESA: driver for VESA chipsets: vesa
[ 15.512] (++) using VT number 1
[ 15.512] (II) [drm] nouveau interface version: 1.1.1
[ 15.512] (II) modesetting(G0): using drv /dev/dri/card1
[ 15.512] (WW) Falling back to old probe method for modesetting
[ 15.512] (WW) Falling back to old probe method for vesa
[ 15.512] (II) Loading sub module "dri2"
[ 15.512] (II) LoadModule: "dri2"
[ 15.512] (II) Module "dri2" already built-in
[ 15.512] (--) NOUVEAU(0): Chipset: "NVIDIA NVE7"
[ 15.512] (II) NOUVEAU(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 15.512] (==) NOUVEAU(0): Depth 24, (--) framebuffer bpp 32
[ 15.512] (==) NOUVEAU(0): RGB weight 888
[ 15.512] (==) NOUVEAU(0): Default visual is TrueColor
[ 15.512] (==) NOUVEAU(0): Using HW cursor
[ 15.512] (==) NOUVEAU(0): GLX sync to VBlank disabled.
[ 15.512] (==) NOUVEAU(0): Page flipping enabled
[ 15.512] (==) NOUVEAU(0): Swap limit set to 2 [Max allowed 2]
[ 15.521] (II) NOUVEAU(0): Output eDP-1 has no monitor section
[ 15.558] (II) NOUVEAU(0): Output DP-1 has no monitor section
[ 15.563] (II) NOUVEAU(0): Output DP-2 has no monitor section
[ 15.565] (II) NOUVEAU(0): Output HDMI-1 has no monitor section
[ 15.569] (II) NOUVEAU(0): EDID for output eDP-1
[ 15.569] (II) NOUVEAU(0): Manufacturer: APP Model: a00f Serial#: 0
[ 15.569] (II) NOUVEAU(0): Year: 2011 Week: 16
[ 15.569] (II) NOUVEAU(0): EDID Version: 1.4
[ 15.569] (II) NOUVEAU(0): Digital Display Input
[ 15.569] (II) NOUVEAU(0): 8 bits per channel
[ 15.569] (II) NOUVEAU(0): Digital interface is DisplayPort
[ 15.569] (II) NOUVEAU(0): Max Image Size [cm]: horiz.: 33 vert.: 21
[ 15.569] (II) NOUVEAU(0): Gamma: 2.20
[ 15.569] (II) NOUVEAU(0): No DPMS capabilities specified
[ 15.569] (II) NOUVEAU(0): Supported color encodings: RGB 4:4:4
[ 15.569] (II) NOUVEAU(0): First detailed timing is preferred mode
[ 15.569] (II) NOUVEAU(0): Preferred mode is native pixel format and refresh rate
[ 15.569] (II) NOUVEAU(0): redX: 0.653 redY: 0.334 greenX: 0.300 greenY: 0.620
[ 15.569] (II) NOUVEAU(0): blueX: 0.146 blueY: 0.050 whiteX: 0.312 whiteY: 0.329
[ 15.569] (II) NOUVEAU(0): Manufacturer's mask: 0
[ 15.569] (II) NOUVEAU(0): Supported detailed timing:
[ 15.569] (II) NOUVEAU(0): clock: 337.8 MHz Image Size: 331 x 207 mm
[ 15.569] (II) NOUVEAU(0): h_active: 2880 h_sync: 2928 h_sync_end 2960 h_blank_end 3040 h_border: 0
[ 15.569] (II) NOUVEAU(0): v_active: 1800 v_sync: 1803 v_sync_end 1809 v_blanking: 1852 v_border: 0
[ 15.569] (II) NOUVEAU(0): Monitor name: Color LCD
[ 15.569] (II) NOUVEAU(0): EDID (in hex):
[ 15.569] (II) NOUVEAU(0): 00ffffffffffff0006100fa000000000
[ 15.569] (II) NOUVEAU(0): 10150104a5211578026fb1a7554c9e25
[ 15.569] (II) NOUVEAU(0): 0c505400000001010101010101010101
[ 15.569] (II) NOUVEAU(0): 010101010101ef8340a0b00834703020
[ 15.569] (II) NOUVEAU(0): 36004bcf1000001a000000fc00436f6c
[ 15.569] (II) NOUVEAU(0): 6f72204c43440a202020000000100000
[ 15.569] (II) NOUVEAU(0): 00000000000000000000000000000010
[ 15.569] (II) NOUVEAU(0): 000000000000000000000000000000e7
[ 15.569] (II) NOUVEAU(0): Printing probed modes for output eDP-1
[ 15.569] (II) NOUVEAU(0): Modeline "2880x1800"x60.0 337.75 2880 2928 2960 3040 1800 1803 1809 1852 +hsync -vsync (111.1 kHz eP)
[ 15.569] (II) NOUVEAU(0): Modeline "1920x1200"x59.9 193.25 1920 2056 2256 2592 1200 1203 1209 1245 -hsync +vsync (74.6 kHz e)
[ 15.569] (II) NOUVEAU(0): Modeline "1920x1080"x60.0 173.00 1920 2048 2248 2576 1080 1083 1088 1120 -hsync +vsync (67.2 kHz e)
[ 15.569] (II) NOUVEAU(0): Modeline "1600x1200"x59.9 161.00 1600 1712 1880 2160 1200 1203 1207 1245 -hsync +vsync (74.5 kHz e)
[ 15.569] (II) NOUVEAU(0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
[ 15.569] (II) NOUVEAU(0): Modeline "1400x1050"x60.0 121.75 1400 1488 1632 1864 1050 1053 1057 1089 -hsync +vsync (65.3 kHz e)
[ 15.569] (II) NOUVEAU(0): Modeline "1280x1024"x59.9 109.00 1280 1368 1496 1712 1024 1027 1034 1063 -hsync +vsync (63.7 kHz e)
[ 15.569] (II) NOUVEAU(0): Modeline "1280x960"x59.9 101.25 1280 1360 1488 1696 960 963 967 996 -hsync +vsync (59.7 kHz e)
[ 15.569] (II) NOUVEAU(0): Modeline "1152x864"x60.0 81.75 1152 1216 1336 1520 864 867 871 897 -hsync +vsync (53.8 kHz e)
[ 15.569] (II) NOUVEAU(0): Modeline "1024x768"x59.9 63.50 1024 1072 1176 1328 768 771 775 798 -hsync +vsync (47.8 kHz e)
[ 15.569] (II) NOUVEAU(0): Modeline "800x600"x59.9 38.25 800 832 912 1024 600 603 607 624 -hsync +vsync (37.4 kHz e)
[ 15.569] (II) NOUVEAU(0): Modeline "640x480"x59.4 23.75 640 664 720 800 480 483 487 500 -hsync +vsync (29.7 kHz e)
[ 15.569] (II) NOUVEAU(0): Modeline "720x400"x59.6 22.25 720 744 808 896 400 403 413 417 -hsync +vsync (24.8 kHz e)
[ 15.569] (II) NOUVEAU(0): Modeline "640x400"x60.0 20.00 640 664 720 800 400 403 409 417 -hsync +vsync (25.0 kHz e)
[ 15.569] (II) NOUVEAU(0): Modeline "640x350"x59.8 17.50 640 664 720 800 350 353 363 366 -hsync +vsync (21.9 kHz e)
[ 15.606] (II) NOUVEAU(0): EDID for output DP-1
[ 15.606] (II) NOUVEAU(0): Manufacturer: DEL Model: a055 Serial#: 825448780
[ 15.606] (II) NOUVEAU(0): Year: 2010 Week: 47
[ 15.606] (II) NOUVEAU(0): EDID Version: 1.3
[ 15.606] (II) NOUVEAU(0): Digital Display Input
[ 15.606] (II) NOUVEAU(0): Max Image Size [cm]: horiz.: 60 vert.: 34
[ 15.606] (II) NOUVEAU(0): Gamma: 2.20
[ 15.606] (II) NOUVEAU(0): DPMS capabilities: StandBy Suspend Off
[ 15.606] (II) NOUVEAU(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 15.606] (II) NOUVEAU(0): First detailed timing is preferred mode
[ 15.606] (II) NOUVEAU(0): redX: 0.678 redY: 0.309 greenX: 0.202 greenY: 0.689
[ 15.606] (II) NOUVEAU(0): blueX: 0.148 blueY: 0.051 whiteX: 0.313 whiteY: 0.329
[ 15.606] (II) NOUVEAU(0): Supported established timings:
[ 15.606] (II) NOUVEAU(0): 720x400@70Hz
[ 15.606] (II) NOUVEAU(0): 640x480@60Hz
[ 15.606] (II) NOUVEAU(0): 640x480@75Hz
[ 15.606] (II) NOUVEAU(0): 800x600@60Hz
[ 15.606] (II) NOUVEAU(0): 800x600@75Hz
[ 15.606] (II) NOUVEAU(0): 1024x768@60Hz
[ 15.606] (II) NOUVEAU(0): 1024x768@75Hz
[ 15.606] (II) NOUVEAU(0): 1280x1024@75Hz
[ 15.606] (II) NOUVEAU(0): Manufacturer's mask: 0
[ 15.606] (II) NOUVEAU(0): Supported standard timings:
[ 15.606] (II) NOUVEAU(0): #0: hsize: 1280 vsize 800 refresh: 60 vid: 129
[ 15.606] (II) NOUVEAU(0): #1: hsize: 1680 vsize 1050 refresh: 60 vid: 179
[ 15.606] (II) NOUVEAU(0): #2: hsize: 1920 vsize 1200 refresh: 60 vid: 209
[ 15.606] (II) NOUVEAU(0): #3: hsize: 1152 vsize 864 refresh: 75 vid: 20337
[ 15.606] (II) NOUVEAU(0): #4: hsize: 1600 vsize 1200 refresh: 60 vid: 16553
[ 15.606] (II) NOUVEAU(0): #5: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 15.606] (II) NOUVEAU(0): Supported detailed timing:
[ 15.606] (II) NOUVEAU(0): clock: 241.5 MHz Image Size: 597 x 336 mm
[ 15.606] (II) NOUVEAU(0): h_active: 2560 h_sync: 2608 h_sync_end 2640 h_blank_end 2720 h_border: 0
[ 15.606] (II) NOUVEAU(0): v_active: 1440 v_sync: 1443 v_sync_end 1448 v_blanking: 1481 v_border: 0
[ 15.606] (II) NOUVEAU(0): Serial No: D971T0BH13YL
[ 15.606] (II) NOUVEAU(0): Monitor name: DELL U2711
[ 15.606] (II) NOUVEAU(0): Ranges: V min: 49 V max: 86 Hz, H min: 29 H max: 113 kHz, PixClock max 285 MHz
[ 15.606] (II) NOUVEAU(0): EDID (in hex):
[ 15.606] (II) NOUVEAU(0): 00ffffffffffff0010ac55a04c593331
[ 15.606] (II) NOUVEAU(0): 2f140103803c2278ea8e05ad4f33b026
[ 15.606] (II) NOUVEAU(0): 0d5054a54b008100b300d100714fa940
[ 15.606] (II) NOUVEAU(0): 818001010101565e00a0a0a029503020
[ 15.606] (II) NOUVEAU(0): 350055502100001a000000ff00443937
[ 15.606] (II) NOUVEAU(0): 31543042483133594c0a000000fc0044
[ 15.606] (II) NOUVEAU(0): 454c4c2055323731310a2020000000fd
[ 15.606] (II) NOUVEAU(0): 0031561d711c000a20202020202000c3
[ 15.606] (II) NOUVEAU(0): Printing probed modes for output DP-1
[ 15.606] (II) NOUVEAU(0): Modeline "2560x1440"x60.0 241.50 2560 2608 2640 2720 1440 1443 1448 1481 +hsync -vsync (88.8 kHz eP)
[ 15.606] (II) NOUVEAU(0): Modeline "1920x1200"x60.0 154.00 1920 1968 2000 2080 1200 1203 1209 1235 +hsync -vsync (74.0 kHz e)
[ 15.606] (II) NOUVEAU(0): Modeline "1600x1200"x60.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[ 15.606] (II) NOUVEAU(0): Modeline "1680x1050"x59.9 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[ 15.606] (II) NOUVEAU(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 15.606] (II) NOUVEAU(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 15.606] (II) NOUVEAU(0): Modeline "1280x800"x59.9 71.00 1280 1328 1360 1440 800 803 809 823 +hsync -vsync (49.3 kHz e)
[ 15.606] (II) NOUVEAU(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 15.606] (II) NOUVEAU(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz e)
[ 15.606] (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 15.606] (II) NOUVEAU(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 15.606] (II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 15.606] (II) NOUVEAU(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 15.606] (II) NOUVEAU(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 15.606] (II) NOUVEAU(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 15.611] (II) NOUVEAU(0): EDID for output DP-2
[ 15.613] (II) NOUVEAU(0): EDID for output HDMI-1
[ 15.613] (II) NOUVEAU(0): Output eDP-1 connected
[ 15.613] (II) NOUVEAU(0): Output DP-1 connected
[ 15.613] (II) NOUVEAU(0): Output DP-2 disconnected
[ 15.613] (II) NOUVEAU(0): Output HDMI-1 disconnected
[ 15.613] (II) NOUVEAU(0): Using fuzzy aspect match for initial modes
[ 15.613] (II) NOUVEAU(0): Output eDP-1 using initial mode 1600x1200
[ 15.613] (II) NOUVEAU(0): Output DP-1 using initial mode 1600x1200
[ 15.613] (II) NOUVEAU(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 15.613] (--) NOUVEAU(0): Virtual size is 1600x1200 (pitch 0)
[ 15.613] (**) NOUVEAU(0): Driver mode "1600x1200": 162.0 MHz (scaled from 0.0 MHz), 75.0 kHz, 60.0 Hz
[ 15.613] (II) NOUVEAU(0): Modeline "1600x1200"x60.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[ 15.613] (**) NOUVEAU(0): Driver mode "1680x1050": 119.0 MHz (scaled from 0.0 MHz), 64.7 kHz, 59.9 Hz
[ 15.613] (II) NOUVEAU(0): Modeline "1680x1050"x59.9 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[ 15.613] (**) NOUVEAU(0): Driver mode "1280x1024": 135.0 MHz (scaled from 0.0 MHz), 80.0 kHz, 75.0 Hz
[ 15.613] (II) NOUVEAU(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 15.613] (**) NOUVEAU(0): Driver mode "1280x1024": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
[ 15.613] (II) NOUVEAU(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 15.613] (**) NOUVEAU(0): Driver mode "1280x800": 71.0 MHz (scaled from 0.0 MHz), 49.3 kHz, 59.9 Hz
[ 15.613] (II) NOUVEAU(0): Modeline "1280x800"x59.9 71.00 1280 1328 1360 1440 800 803 809 823 +hsync -vsync (49.3 kHz e)
[ 15.613] (**) NOUVEAU(0): Driver mode "1152x864": 108.0 MHz (scaled from 0.0 MHz), 67.5 kHz, 75.0 Hz
[ 15.613] (II) NOUVEAU(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 15.613] (**) NOUVEAU(0): Driver mode "1024x768": 78.8 MHz (scaled from 0.0 MHz), 60.1 kHz, 75.1 Hz
[ 15.613] (II) NOUVEAU(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz e)
[ 15.613] (**) NOUVEAU(0): Driver mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
[ 15.613] (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 15.613] (**) NOUVEAU(0): Driver mode "800x600": 49.5 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz
[ 15.613] (II) NOUVEAU(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 15.613] (**) NOUVEAU(0): Driver mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.3 Hz
[ 15.613] (II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 15.613] (**) NOUVEAU(0): Driver mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.5 kHz, 75.0 Hz
[ 15.613] (II) NOUVEAU(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 15.613] (**) NOUVEAU(0): Driver mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
[ 15.613] (II) NOUVEAU(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 15.613] (**) NOUVEAU(0): Driver mode "720x400": 28.3 MHz (scaled from 0.0 MHz), 31.5 kHz, 70.1 Hz
[ 15.613] (II) NOUVEAU(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 15.613] (**) NOUVEAU(0): Driver mode "2560x1440": 241.5 MHz (scaled from 0.0 MHz), 88.8 kHz, 60.0 Hz
[ 15.613] (II) NOUVEAU(0): Modeline "2560x1440"x60.0 241.50 2560 2608 2640 2720 1440 1443 1448 1481 +hsync -vsync (88.8 kHz eP)
[ 15.613] (**) NOUVEAU(0): Driver mode "1920x1200": 154.0 MHz (scaled from 0.0 MHz), 74.0 kHz, 60.0 Hz
[ 15.613] (II) NOUVEAU(0): Modeline "1920x1200"x60.0 154.00 1920 1968 2000 2080 1200 1203 1209 1235 +hsync -vsync (74.0 kHz e)
[ 15.613] (==) NOUVEAU(0): DPI set to (96, 96)
[ 15.613] (II) Loading sub module "fb"
[ 15.613] (II) LoadModule: "fb"
[ 15.613] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 15.615] (II) Module fb: vendor="X.Org Foundation"
[ 15.615] compiled for 1.15.0, module version = 1.0.0
[ 15.615] ABI class: X.Org ANSI C Emulation, version 0.4
[ 15.615] (II) Loading sub module "exa"
[ 15.615] (II) LoadModule: "exa"
[ 15.615] (II) Loading /usr/lib/xorg/modules/libexa.so
[ 15.616] (II) Module exa: vendor="X.Org Foundation"
[ 15.616] compiled for 1.15.0, module version = 2.6.0
[ 15.616] ABI class: X.Org Video Driver, version 15.0
[ 15.616] (II) Loading sub module "shadowfb"
[ 15.616] (II) LoadModule: "shadowfb"
[ 15.616] (II) Loading /usr/lib/xorg/modules/libshadowfb.so
[ 15.616] (II) Module shadowfb: vendor="X.Org Foundation"
[ 15.616] compiled for 1.15.0, module version = 1.0.0
[ 15.616] ABI class: X.Org ANSI C Emulation, version 0.4
[ 15.616] (==) modesetting(G0): Depth 24, (==) framebuffer bpp 32
[ 15.616] (==) modesetting(G0): RGB weight 888
[ 15.616] (==) modesetting(G0): Default visual is TrueColor
[ 15.616] (II) modesetting(G0): ShadowFB: preferred YES, enabled YES
[ 15.643] (II) modesetting(G0): Output VGA-1-0 has no monitor section
[ 15.670] (II) modesetting(G0): EDID for output VGA-1-0
[ 15.670] (II) modesetting(G0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 15.670] (==) modesetting(G0): DPI set to (96, 96)
[ 15.670] (II) Loading sub module "fb"
[ 15.670] (II) LoadModule: "fb"
[ 15.670] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 15.670] (II) Module fb: vendor="X.Org Foundation"
[ 15.670] compiled for 1.15.0, module version = 1.0.0
[ 15.670] ABI class: X.Org ANSI C Emulation, version 0.4
[ 15.670] (II) Loading sub module "shadow"
[ 15.670] (II) LoadModule: "shadow"
[ 15.670] (II) Loading /usr/lib/xorg/modules/libshadow.so
[ 15.670] (II) Module shadow: vendor="X.Org Foundation"
[ 15.670] compiled for 1.15.0, module version = 1.1.0
[ 15.670] ABI class: X.Org ANSI C Emulation, version 0.4
[ 15.670] (II) UnloadModule: "vesa"
[ 15.670] (II) Unloading vesa
[ 15.670] (--) Depth 24 pixmap format is 32 bpp
[ 15.672] (==) modesetting(G0): Backing store enabled
[ 15.672] (==) modesetting(G0): Silken mouse enabled
[ 15.672] (II) modesetting(G0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 15.673] (==) modesetting(G0): DPMS enabled
[ 15.676] (II) NOUVEAU(0): Opened GPU channel 0
[ 15.678] (II) NOUVEAU(0): [DRI2] Setup complete
[ 15.678] (II) NOUVEAU(0): [DRI2] DRI driver: nouveau
[ 15.678] (II) NOUVEAU(0): [DRI2] VDPAU driver: nouveau
[ 15.678] (II) EXA(0): Driver allocated offscreen pixmaps
[ 15.678] (II) EXA(0): Driver registered support for the following operations:
[ 15.678] (II) Solid
[ 15.678] (II) Copy
[ 15.678] (II) Composite (RENDER acceleration)
[ 15.678] (II) UploadToScreen
[ 15.678] (II) DownloadFromScreen
[ 15.678] (==) NOUVEAU(0): Backing store enabled
[ 15.678] (==) NOUVEAU(0): Silken mouse enabled
[ 15.678] (II) NOUVEAU(0): [XvMC] Associated with Nouveau GeForce 8/9 Textured Video.
[ 15.678] (II) NOUVEAU(0): [XvMC] Extension initialized.
[ 15.678] (==) NOUVEAU(0): DPMS enabled
[ 15.678] (II) NOUVEAU(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 15.678] (--) RandR disabled
[ 15.763] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 15.763] (II) AIGLX: enabled GLX_ARB_create_context
[ 15.763] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 15.763] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 15.763] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 15.763] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 15.763] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[ 15.763] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[ 15.763] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 15.764] (II) AIGLX: Loaded and initialized nouveau
[ 15.764] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 15.764] (II) modesetting(G0): Damage tracking initialized
[ 15.770] (II) NOUVEAU(0): NVEnterVT is called.
[ 23.780] (II) NOUVEAU(0): Setting screen physical size to 423 x 317
[ 23.780] resize called 1600 1200
[ 23.815] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 23.815] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 23.815] (**) Power Button: Applying InputClass "system-keyboard"
[ 23.815] (II) LoadModule: "evdev"
[ 23.815] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 23.816] (II) Module evdev: vendor="X.Org Foundation"
[ 23.816] compiled for 1.15.0, module version = 2.8.2
[ 23.816] Module class: X.Org XInput Driver
[ 23.816] ABI class: X.Org XInput driver, version 20.0
[ 23.816] (II) Using input driver 'evdev' for 'Power Button'
[ 23.816] (**) Power Button: always reports core events
[ 23.816] (**) evdev: Power Button: Device: "/dev/input/event3"
[ 23.816] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 23.816] (--) evdev: Power Button: Found keys
[ 23.816] (II) evdev: Power Button: Configuring as keyboard
[ 23.816] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[ 23.816] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 23.816] (**) Option "xkb_rules" "evdev"
[ 23.816] (**) Option "xkb_model" "pc104"
[ 23.816] (**) Option "xkb_layout" "us"
[ 23.816] (**) Option "xkb_options" "ctrl:nocaps"
[ 23.829] (II) config/udev: Adding input device Video Bus (/dev/input/event16)
[ 23.829] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 23.829] (**) Video Bus: Applying InputClass "system-keyboard"
[ 23.829] (II) Using input driver 'evdev' for 'Video Bus'
[ 23.829] (**) Video Bus: always reports core events
[ 23.829] (**) evdev: Video Bus: Device: "/dev/input/event16"
[ 23.829] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 23.829] (--) evdev: Video Bus: Found keys
[ 23.829] (II) evdev: Video Bus: Configuring as keyboard
[ 23.829] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input18/event16"
[ 23.829] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 23.829] (**) Option "xkb_rules" "evdev"
[ 23.829] (**) Option "xkb_model" "pc104"
[ 23.829] (**) Option "xkb_layout" "us"
[ 23.829] (**) Option "xkb_options" "ctrl:nocaps"
[ 23.830] (II) config/udev: Adding input device Video Bus (/dev/input/event15)
[ 23.830] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 23.830] (**) Video Bus: Applying InputClass "system-keyboard"
[ 23.830] (II) Using input driver 'evdev' for 'Video Bus'
[ 23.830] (**) Video Bus: always reports core events
[ 23.830] (**) evdev: Video Bus: Device: "/dev/input/event15"
[ 23.830] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 23.830] (--) evdev: Video Bus: Found keys
[ 23.830] (II) evdev: Video Bus: Configuring as keyboard
[ 23.830] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/LNXVIDEO:00/input/input17/event15"
[ 23.830] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[ 23.830] (**) Option "xkb_rules" "evdev"
[ 23.830] (**) Option "xkb_model" "pc104"
[ 23.830] (**) Option "xkb_layout" "us"
[ 23.830] (**) Option "xkb_options" "ctrl:nocaps"
[ 23.830] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 23.830] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 23.830] (**) Power Button: Applying InputClass "system-keyboard"
[ 23.830] (II) Using input driver 'evdev' for 'Power Button'
[ 23.830] (**) Power Button: always reports core events
[ 23.830] (**) evdev: Power Button: Device: "/dev/input/event1"
[ 23.830] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 23.830] (--) evdev: Power Button: Found keys
[ 23.830] (II) evdev: Power Button: Configuring as keyboard
[ 23.830] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1/event1"
[ 23.830] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 9)
[ 23.830] (**) Option "xkb_rules" "evdev"
[ 23.830] (**) Option "xkb_model" "pc104"
[ 23.830] (**) Option "xkb_layout" "us"
[ 23.830] (**) Option "xkb_options" "ctrl:nocaps"
[ 23.830] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
[ 23.830] (II) No input driver specified, ignoring this device.
[ 23.830] (II) This device may have been added with another device file.
[ 23.830] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[ 23.830] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 23.830] (**) Sleep Button: Applying InputClass "system-keyboard"
[ 23.830] (II) Using input driver 'evdev' for 'Sleep Button'
[ 23.830] (**) Sleep Button: always reports core events
[ 23.830] (**) evdev: Sleep Button: Device: "/dev/input/event2"
[ 23.830] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 23.830] (--) evdev: Sleep Button: Found keys
[ 23.830] (II) evdev: Sleep Button: Configuring as keyboard
[ 23.830] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2/event2"
[ 23.830] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 10)
[ 23.830] (**) Option "xkb_rules" "evdev"
[ 23.830] (**) Option "xkb_model" "pc104"
[ 23.830] (**) Option "xkb_layout" "us"
[ 23.830] (**) Option "xkb_options" "ctrl:nocaps"
[ 23.831] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 23.831] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event14)
[ 23.831] (II) No input driver specified, ignoring this device.
[ 23.831] (II) This device may have been added with another device file.
[ 23.831] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event11)
[ 23.831] (II) No input driver specified, ignoring this device.
[ 23.831] (II) This device may have been added with another device file.
[ 23.831] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event10)
[ 23.831] (II) No input driver specified, ignoring this device.
[ 23.831] (II) This device may have been added with another device file.
[ 23.831] (II) config/udev: Adding drm device (/dev/dri/card1)
[ 23.831] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/event9)
[ 23.831] (**) Logitech USB Optical Mouse: Applying InputClass "evdev pointer catchall"
[ 23.831] (II) Using input driver 'evdev' for 'Logitech USB Optical Mouse'
[ 23.831] (**) Logitech USB Optical Mouse: always reports core events
[ 23.831] (**) evdev: Logitech USB Optical Mouse: Device: "/dev/input/event9"
[ 23.831] (--) evdev: Logitech USB Optical Mouse: Vendor 0x46d Product 0xc05a
[ 23.831] (--) evdev: Logitech USB Optical Mouse: Found 12 mouse buttons
[ 23.831] (--) evdev: Logitech USB Optical Mouse: Found scroll wheel(s)
[ 23.831] (--) evdev: Logitech USB Optical Mouse: Found relative axes
[ 23.831] (--) evdev: Logitech USB Optical Mouse: Found x and y relative axes
[ 23.831] (II) evdev: Logitech USB Optical Mouse: Configuring as mouse
[ 23.831] (II) evdev: Logitech USB Optical Mouse: Adding scrollwheel support
[ 23.831] (**) evdev: Logitech USB Optical Mouse: YAxisMapping: buttons 4 and 5
[ 23.831] (**) evdev: Logitech USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 23.831] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1.1/3-1.1.2/3-1.1.2:1.0/input/input9/event9"
[ 23.831] (II) XINPUT: Adding extended input device "Logitech USB Optical Mouse" (type: MOUSE, id 11)
[ 23.831] (II) evdev: Logitech USB Optical Mouse: initialized for relative axes.
[ 23.832] (**) Logitech USB Optical Mouse: (accel) keeping acceleration scheme 1
[ 23.832] (**) Logitech USB Optical Mouse: (accel) acceleration profile 0
[ 23.832] (**) Logitech USB Optical Mouse: (accel) acceleration factor: 2.000
[ 23.832] (**) Logitech USB Optical Mouse: (accel) acceleration threshold: 4
[ 23.832] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/mouse1)
[ 23.832] (II) No input driver specified, ignoring this device.
[ 23.832] (II) This device may have been added with another device file.
[ 23.832] (II) config/udev: Adding input device Apple Inc. Apple Keyboard (/dev/input/event12)
[ 23.832] (**) Apple Inc. Apple Keyboard: Applying InputClass "evdev keyboard catchall"
[ 23.832] (**) Apple Inc. Apple Keyboard: Applying InputClass "system-keyboard"
[ 23.832] (II) Using input driver 'evdev' for 'Apple Inc. Apple Keyboard'
[ 23.832] (**) Apple Inc. Apple Keyboard: always reports core events
[ 23.832] (**) evdev: Apple Inc. Apple Keyboard: Device: "/dev/input/event12"
[ 23.832] (--) evdev: Apple Inc. Apple Keyboard: Vendor 0x5ac Product 0x24f
[ 23.832] (--) evdev: Apple Inc. Apple Keyboard: Found keys
[ 23.832] (II) evdev: Apple Inc. Apple Keyboard: Configuring as keyboard
[ 23.832] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1.1/3-1.1.4/3-1.1.4.2/3-1.1.4.2:1.0/input/input12/event12"
[ 23.832] (II) XINPUT: Adding extended input device "Apple Inc. Apple Keyboard" (type: KEYBOARD, id 12)
[ 23.832] (**) Option "xkb_rules" "evdev"
[ 23.832] (**) Option "xkb_model" "pc104"
[ 23.832] (**) Option "xkb_layout" "us"
[ 23.832] (**) Option "xkb_options" "ctrl:nocaps"
[ 23.832] (II) config/udev: Adding input device Apple Inc. Apple Keyboard (/dev/input/event13)
[ 23.832] (**) Apple Inc. Apple Keyboard: Applying InputClass "evdev keyboard catchall"
[ 23.832] (**) Apple Inc. Apple Keyboard: Applying InputClass "system-keyboard"
[ 23.832] (II) Using input driver 'evdev' for 'Apple Inc. Apple Keyboard'
[ 23.832] (**) Apple Inc. Apple Keyboard: always reports core events
[ 23.832] (**) evdev: Apple Inc. Apple Keyboard: Device: "/dev/input/event13"
[ 23.832] (--) evdev: Apple Inc. Apple Keyboard: Vendor 0x5ac Product 0x24f
[ 23.832] (--) evdev: Apple Inc. Apple Keyboard: Found keys
[ 23.832] (II) evdev: Apple Inc. Apple Keyboard: Configuring as keyboard
[ 23.832] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1.1/3-1.1.4/3-1.1.4.2/3-1.1.4.2:1.1/input/input13/event13"
[ 23.832] (II) XINPUT: Adding extended input device "Apple Inc. Apple Keyboard" (type: KEYBOARD, id 13)
[ 23.832] (**) Option "xkb_rules" "evdev"
[ 23.832] (**) Option "xkb_model" "pc104"
[ 23.832] (**) Option "xkb_layout" "us"
[ 23.832] (**) Option "xkb_options" "ctrl:nocaps"
[ 23.832] (II) config/udev: Adding input device FaceTime HD Camera (Built-in) (/dev/input/event6)
[ 23.833] (**) FaceTime HD Camera (Built-in): Applying InputClass "evdev keyboard catchall"
[ 23.833] (**) FaceTime HD Camera (Built-in): Applying InputClass "system-keyboard"
[ 23.833] (II) Using input driver 'evdev' for 'FaceTime HD Camera (Built-in)'
[ 23.833] (**) FaceTime HD Camera (Built-in): always reports core events
[ 23.833] (**) evdev: FaceTime HD Camera (Built-in): Device: "/dev/input/event6"
[ 23.833] (--) evdev: FaceTime HD Camera (Built-in): Vendor 0x5ac Product 0x8510
[ 23.833] (--) evdev: FaceTime HD Camera (Built-in): Found keys
[ 23.833] (II) evdev: FaceTime HD Camera (Built-in): Configuring as keyboard
[ 23.833] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/input/input6/event6"
[ 23.833] (II) XINPUT: Adding extended input device "FaceTime HD Camera (Built-in)" (type: KEYBOARD, id 14)
[ 23.833] (**) Option "xkb_rules" "evdev"
[ 23.833] (**) Option "xkb_model" "pc104"
[ 23.833] (**) Option "xkb_layout" "us"
[ 23.833] (**) Option "xkb_options" "ctrl:nocaps"
[ 23.833] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event5)
[ 23.833] (II) No input driver specified, ignoring this device.
[ 23.833] (II) This device may have been added with another device file.
[ 23.833] (II) config/udev: Adding input device Apple Inc. Apple Internal Keyboard / Trackpad (/dev/input/event8)
[ 23.833] (**) Apple Inc. Apple Internal Keyboard / Trackpad: Applying InputClass "evdev keyboard catchall"
[ 23.833] (**) Apple Inc. Apple Internal Keyboard / Trackpad: Applying InputClass "system-keyboard"
[ 23.833] (II) Using input driver 'evdev' for 'Apple Inc. Apple Internal Keyboard / Trackpad'
[ 23.833] (**) Apple Inc. Apple Internal Keyboard / Trackpad: always reports core events
[ 23.833] (**) evdev: Apple Inc. Apple Internal Keyboard / Trackpad: Device: "/dev/input/event8"
[ 23.833] (--) evdev: Apple Inc. Apple Internal Keyboard / Trackpad: Vendor 0x5ac Product 0x262
[ 23.833] (--) evdev: Apple Inc. Apple Internal Keyboard / Trackpad: Found keys
[ 23.833] (II) evdev: Apple Inc. Apple Internal Keyboard / Trackpad: Configuring as keyboard
[ 23.833] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.8/2-1.8.2/2-1.8.2:1.0/input/input8/event8"
[ 23.833] (II) XINPUT: Adding extended input device "Apple Inc. Apple Internal Keyboard / Trackpad" (type: KEYBOARD, id 15)
[ 23.833] (**) Option "xkb_rules" "evdev"
[ 23.833] (**) Option "xkb_model" "pc104"
[ 23.833] (**) Option "xkb_layout" "us"
[ 23.833] (**) Option "xkb_options" "ctrl:nocaps"
[ 23.833] (II) config/udev: Adding input device bcm5974 (/dev/input/event7)
[ 23.833] (**) bcm5974: Applying InputClass "evdev touchpad catchall"
[ 23.833] (**) bcm5974: Applying InputClass "touchpad catchall"
[ 23.833] (**) bcm5974: Applying InputClass "Default clickpad buttons"
[ 23.833] (**) bcm5974: Applying InputClass "Disable clickpad buttons on Apple touchpads"
[ 23.833] (II) LoadModule: "synaptics"
[ 23.833] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 23.834] (II) Module synaptics: vendor="X.Org Foundation"
[ 23.834] compiled for 1.15.0, module version = 1.7.3
[ 23.834] Module class: X.Org XInput Driver
[ 23.834] ABI class: X.Org XInput driver, version 20.0
[ 23.834] (II) Using input driver 'synaptics' for 'bcm5974'
[ 23.834] (**) bcm5974: always reports core events
[ 23.834] (**) Option "Device" "/dev/input/event7"
[ 23.934] (II) synaptics: bcm5974: found clickpad property
[ 23.934] (--) synaptics: bcm5974: x-axis range -4750 - 5280 (res 0)
[ 23.934] (--) synaptics: bcm5974: y-axis range -150 - 6730 (res 0)
[ 23.934] (--) synaptics: bcm5974: pressure range 0 - 256
[ 23.934] (--) synaptics: bcm5974: finger width range 0 - 16
[ 23.934] (--) synaptics: bcm5974: buttons: left double triple
[ 23.934] (--) synaptics: bcm5974: Vendor 0x5ac Product 0x262
[ 23.934] (**) Option "BottomEdge" "25"
[ 23.934] (**) Option "TapButton1" "1"
[ 23.934] (**) Option "TapButton2" "2"
[ 23.934] (**) Option "TapButton3" "3"
[ 23.934] (**) Option "ClickFinger1" "1"
[ 23.934] (**) Option "ClickFinger2" "2"
[ 23.934] (**) Option "ClickFinger3" "3"
[ 23.934] (WW) synaptics: bcm5974: TopEdge is bigger than BottomEdge. Fixing.
[ 23.934] (**) Option "SoftButtonAreas" "0 0 0 0 0 0 0 0"
[ 23.934] (--) synaptics: bcm5974: touchpad found
[ 23.934] (**) bcm5974: always reports core events
[ 23.967] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.8/2-1.8.2/2-1.8.2:1.2/input/input7/event7"
[ 23.967] (II) XINPUT: Adding extended input device "bcm5974" (type: TOUCHPAD, id 16)
[ 23.967] (**) synaptics: bcm5974: (accel) MinSpeed is now constant deceleration 2.5
[ 23.967] (**) synaptics: bcm5974: (accel) MaxSpeed is now 1.75
[ 23.967] (**) synaptics: bcm5974: (accel) AccelFactor is now 0.016
[ 23.967] (**) bcm5974: (accel) keeping acceleration scheme 1
[ 23.967] (**) bcm5974: (accel) acceleration profile 1
[ 23.967] (**) bcm5974: (accel) acceleration factor: 2.000
[ 23.967] (**) bcm5974: (accel) acceleration threshold: 4
[ 23.968] (--) synaptics: bcm5974: touchpad found
[ 23.968] (II) config/udev: Adding input device bcm5974 (/dev/input/mouse0)
[ 23.968] (**) bcm5974: Ignoring device from InputClass "touchpad ignore duplicates"
[ 23.969] (II) config/udev: Adding input device PC Speaker (/dev/input/event4)
[ 23.969] (II) No input driver specified, ignoring this device.
[ 23.969] (II) This device may have been added with another device file.Any advice? Thanks so much, let me know if I can provide more information.
EDIT: Interesting--I switched to another virtual terminal and ran `ps -A | grep tty1`:
475 tty1 00:00:00 zsh
491 tty1 00:00:00 startx
508 tty1 00:00:00 xinit
550 tty1 00:00:00 xmonad-x86_64-lxmobar was also running, which suggests to me that X had successfully launched xmonad, which in turn launched xmobar during its configuration... so now I'm pretty stumped about where to look next.
Last edited by jds02006 (2014-02-24 02:08:27)
Offline
#2 2014-02-24 19:23:31
- jds02006
- Member
- Registered: 2014-02-23
- Posts: 5
Re: External thunderbolt monitor breaks Xorg
So it looks like the problem has to do with the active Thunderbolt to DVI-D adapter, as I just connected another monitor using a passive adapter and it worked fine. Has anyone successfully used one of these adapters with Archlinux?
Offline
#3 2014-11-28 02:38:56
- xuhdev
- Member
- Registered: 2014-08-11
- Posts: 26
- Website
Re: External thunderbolt monitor breaks Xorg
I also have the same issue. Will post here if I can solve it.
Offline
#4 2014-12-21 11:23:49
- xuhdev
- Member
- Registered: 2014-08-11
- Posts: 26
- Website
Re: External thunderbolt monitor breaks Xorg
I chatted with nouveau people on IRC, and the problem may be related to a bug in the current kernel, if you have an eDP builtin display, like you and me. Have you tried to use the 3.14 LTS kernel? The bug has not been introduced at that time. My guess is the fix would be included in 3.18.2 or 3.19.1.
Offline
Pages: 1