You are not logged in.
- Topics: Active | Unanswered
#1 2014-03-09 06:26:31
- empter
- Member
- Registered: 2014-02-06
- Posts: 6
[Solved]mesa upgrade then X unable to start
I've just upgrade mesa from 10.0.3-1 -> 10.1.0-2.after reboot, X failed to start. here's the Xorg.0.log
[ 24.767]
X.Org X Server 1.15.0
Release Date: 2013-12-27
[ 24.768] X Protocol Version 11, Revision 0
[ 24.770] Build Operating System: Linux 3.12.5-1-ARCH x86_64
[ 24.772] Current Operating System: Linux Empter 3.13.6-1-ARCH #1 SMP PREEMPT Fri Mar 7 22:47:48 CET 2014 x86_64
[ 24.773] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=c09036ad-209f-483e-ad39-eadcf22f6e83 rw quiet
[ 24.776] Build Date: 09 January 2014 08:47:24AM
[ 24.776]
[ 24.777] Current version of pixman: 0.32.4
[ 24.779] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 24.779] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 24.784] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Mar 9 13:46:57 2014
[ 24.842] (==) Using config file: "/etc/X11/xorg.conf"
[ 24.843] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 24.846] (==) ServerLayout "aticonfig Layout"
[ 24.846] (**) |-->Screen "aticonfig-Screen[0]-0" (0)
[ 24.846] (**) | |-->Monitor "aticonfig-Monitor[0]-0"
[ 24.861] (**) | |-->Device "aticonfig-Device[0]-0"
[ 24.861] (==) Automatically adding devices
[ 24.861] (==) Automatically enabling devices
[ 24.861] (==) Automatically adding GPU devices
[ 24.915] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 24.915] Entry deleted from font path.
[ 24.915] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 24.916] Entry deleted from font path.
[ 24.916] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 24.916] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 24.916] Entry deleted from font path.
[ 24.916] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 24.916] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/
[ 24.916] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 24.916] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 24.916] (II) Loader magic: 0x804c80
[ 24.916] (II) Module ABI versions:
[ 24.916] X.Org ANSI C Emulation: 0.4
[ 24.916] X.Org Video Driver: 15.0
[ 24.916] X.Org XInput driver : 20.0
[ 24.916] X.Org Server Extension : 8.0
[ 24.918] (--) PCI:*(0:1:0:0) 1002:68c1:17aa:3928 rev 0, Mem @ 0xd0000000/268435456, 0xe8400000/131072, I/O @ 0x00002000/256, BIOS @ 0x????????/131072
[ 24.918] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 24.925] Initializing built-in extension Generic Event Extension
[ 24.925] Initializing built-in extension SHAPE
[ 24.926] Initializing built-in extension MIT-SHM
[ 24.927] Initializing built-in extension XInputExtension
[ 24.928] Initializing built-in extension XTEST
[ 24.929] Initializing built-in extension BIG-REQUESTS
[ 24.929] Initializing built-in extension SYNC
[ 24.930] Initializing built-in extension XKEYBOARD
[ 24.931] Initializing built-in extension XC-MISC
[ 24.932] Initializing built-in extension SECURITY
[ 24.932] Initializing built-in extension XINERAMA
[ 24.933] Initializing built-in extension XFIXES
[ 24.934] Initializing built-in extension RENDER
[ 24.935] Initializing built-in extension RANDR
[ 24.936] Initializing built-in extension COMPOSITE
[ 24.936] Initializing built-in extension DAMAGE
[ 24.937] Initializing built-in extension MIT-SCREEN-SAVER
[ 24.938] Initializing built-in extension DOUBLE-BUFFER
[ 24.939] Initializing built-in extension RECORD
[ 24.940] Initializing built-in extension DPMS
[ 24.940] Initializing built-in extension Present
[ 24.966] Initializing built-in extension DRI3
[ 24.990] Initializing built-in extension X-Resource
[ 25.015] Initializing built-in extension XVideo
[ 25.040] Initializing built-in extension XVideo-MotionCompensation
[ 25.065] Initializing built-in extension XFree86-VidModeExtension
[ 25.089] Initializing built-in extension XFree86-DGA
[ 25.113] Initializing built-in extension XFree86-DRI
[ 25.137] Initializing built-in extension DRI2
[ 25.137] (II) "glx" will be loaded by default.
[ 25.137] (II) LoadModule: "glx"
[ 25.361] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 25.423] (II) Module glx: vendor="Advanced Micro Devices, Inc."
[ 25.423] compiled for 6.9.0, module version = 1.0.0
[ 25.447] Loading extension GLX
[ 25.447] (II) LoadModule: "fglrx"
[ 25.447] (II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
[ 25.809] (II) Module fglrx: vendor="FireGL - AMD Technologies Inc."
[ 25.809] compiled for 1.4.99.906, module version = 13.35.5
[ 25.809] Module class: X.Org Video Driver
[ 25.810] (II) Loading sub module "fglrxdrm"
[ 25.810] (II) LoadModule: "fglrxdrm"
[ 25.810] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[ 25.859] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
[ 25.859] compiled for 1.4.99.906, module version = 13.35.5
[ 25.859] (II) AMD Proprietary Linux Driver Version Identifier:13.35.5
[ 25.859] (II) AMD Proprietary Linux Driver Release Identifier: UNSUPPORTED-13.35.1005
[ 25.859] (II) AMD Proprietary Linux Driver Build Date: Feb 23 2014 21:38:54
[ 25.859] (++) using VT number 1
[ 25.859] (WW) Falling back to old probe method for fglrx
[ 25.912] (II) Loading PCS database from /etc/ati/amdpcsdb /etc/ati/amdpcsdb.default
[ 25.926] ukiDynamicMajor: found major device number 250
[ 25.926] ukiDynamicMajor: found major device number 250
[ 25.926] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 25.926] ukiOpenDevice: node name is /dev/ati/card0
[ 25.926] ukiOpenDevice: open result is 9, (OK)
[ 26.101] ukiOpenByBusid: ukiOpenMinor returns 9
[ 26.101] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 26.107] (--) Chipset Supported AMD Graphics Processor (0x68C1) found
[ 26.109] (WW) fglrx: No matching Device section for instance (BusID PCI:0@1:0:1) found
[ 26.110] (II) fglrx(0): pEnt->device->identifier=0x17a91d0
[ 26.110] (II) fglrx(0): === [xdl_xs115_atiddxPreInit] === begin
[ 26.110] (II) Loading sub module "vgahw"
[ 26.111] (II) LoadModule: "vgahw"
[ 26.111] (II) Loading /usr/lib/xorg/modules/libvgahw.so
[ 26.123] (II) Module vgahw: vendor="X.Org Foundation"
[ 26.123] compiled for 1.15.0, module version = 0.1.0
[ 26.123] ABI class: X.Org Video Driver, version 15.0
[ 26.124] (**) fglrx(0): Depth 24, (--) framebuffer bpp 32
[ 26.124] (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 26.124] (==) fglrx(0): Default visual is TrueColor
[ 26.124] (**) fglrx(0): Option "DPMS" "true"
[ 26.124] (==) fglrx(0): RGB weight 888
[ 26.125] (II) fglrx(0): Using 8 bits per RGB
[ 26.125] (==) fglrx(0): Buffer Tiling is ON
[ 26.125] (II) Loading sub module "fglrxdrm"
[ 26.125] (II) LoadModule: "fglrxdrm"
[ 26.125] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[ 26.125] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
[ 26.125] compiled for 1.4.99.906, module version = 13.35.5
[ 26.127] ukiDynamicMajor: found major device number 250
[ 26.127] ukiDynamicMajor: found major device number 250
[ 26.127] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 26.127] ukiOpenDevice: node name is /dev/ati/card0
[ 26.127] ukiOpenDevice: open result is 11, (OK)
[ 26.127] ukiOpenByBusid: ukiOpenMinor returns 11
[ 26.127] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 26.128] (**) fglrx(0): NoAccel = NO
[ 26.128] (**) fglrx(0): AMD 2D Acceleration Architecture enabled
[ 26.128] (--) fglrx(0): Chipset: "AMD Mobility Radeon HD 5000 Series" (Chipset = 0x68c1)
[ 26.128] (--) fglrx(0): (PciSubVendor = 0x17aa, PciSubDevice = 0x3928)
[ 26.128] (==) fglrx(0): board vendor info: third party graphics adapter - NOT original AMD
[ 26.128] (--) fglrx(0): Linear framebuffer (phys) at 0xd0000000
[ 26.128] (--) fglrx(0): MMIO registers at 0xe8400000
[ 26.128] (--) fglrx(0): I/O port at 0x00002000
[ 26.128] (==) fglrx(0): ROM-BIOS at 0x000c0000
[ 26.131] (II) fglrx(0): AC Adapter is used
[ 26.145] (II) fglrx(0): Primary V_BIOS segment is: 0xc000
[ 26.147] (II) Loading sub module "vbe"
[ 26.147] (II) LoadModule: "vbe"
[ 26.147] (II) Loading /usr/lib/xorg/modules/libvbe.so
[ 26.148] (II) Module vbe: vendor="X.Org Foundation"
[ 26.148] compiled for 1.15.0, module version = 1.1.0
[ 26.148] ABI class: X.Org Video Driver, version 15.0
[ 26.160] (II) fglrx(0): VESA BIOS detected
[ 26.160] (II) fglrx(0): VESA VBE Version 3.0
[ 26.160] (II) fglrx(0): VESA VBE Total Mem: 16384 kB
[ 26.160] (II) fglrx(0): VESA VBE OEM: ATI ATOMBIOS
[ 26.160] (II) fglrx(0): VESA VBE OEM Software Rev: 12.20
[ 26.160] (II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2005, ATI Technologies Inc.
[ 26.160] (II) fglrx(0): VESA VBE OEM Product: MADISON
[ 26.160] (II) fglrx(0): VESA VBE OEM Product Rev: 01.00
[ 26.160] (II) fglrx(0): AMD Video BIOS revision 9 or later detected
[ 26.160] (--) fglrx(0): Video RAM: 1048576 kByte, Type: DDR3
[ 26.160] (II) fglrx(0): PCIE card detected
[ 26.160] (--) fglrx(0): Using per-process page tables (PPPT) as GART.
[ 26.160] (WW) fglrx(0): board is an unknown third party board, chipset is supported
[ 26.160] (II) fglrx(0): [FB] MC range(MCFBBase = 0xf00000000, MCFBSize = 0x40000000)
[ 26.160] (II) fglrx(0): RandR 1.2 support is enabled!
[ 26.160] (II) fglrx(0): RandR 1.2 rotation support is enabled!
[ 26.160] (II) Loading sub module "fb"
[ 26.160] (II) LoadModule: "fb"
[ 26.160] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 26.175] (II) Module fb: vendor="X.Org Foundation"
[ 26.175] compiled for 1.15.0, module version = 1.0.0
[ 26.175] ABI class: X.Org ANSI C Emulation, version 0.4
[ 26.175] (II) fglrx(0): EDID Management option: EDID Management is enabled
[ 26.175] (II) Loading sub module "ddc"
[ 26.175] (II) LoadModule: "ddc"
[ 26.175] (II) Module "ddc" already built-in
[ 26.409] (II) fglrx(0): Output LVDS using monitor section aticonfig-Monitor[0]-0
[ 26.409] (II) fglrx(0): Output DFP1 has no monitor section
[ 26.409] (II) fglrx(0): Output CRT1 has no monitor section
[ 26.409] (II) Loading sub module "ddc"
[ 26.409] (II) LoadModule: "ddc"
[ 26.409] (II) Module "ddc" already built-in
[ 26.409] (II) fglrx(0): Connected Display0: LVDS
[ 26.409] (II) fglrx(0): Display0 EDID data ---------------------------
[ 26.409] (II) fglrx(0): Manufacturer: SEC Model: 3049 Serial#: 1
[ 26.409] (II) fglrx(0): Year: 2009 Week: 0
[ 26.409] (II) fglrx(0): EDID Version: 1.3
[ 26.409] (II) fglrx(0): Digital Display Input
[ 26.409] (II) fglrx(0): Max Image Size [cm]: horiz.: 32 vert.: 19
[ 26.409] (II) fglrx(0): Gamma: 2.20
[ 26.409] (II) fglrx(0): DPMS capabilities: StandBy Suspend Off
[ 26.409] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 26.409] (II) fglrx(0): First detailed timing is preferred mode
[ 26.409] (II) fglrx(0): redX: 0.580 redY: 0.340 greenX: 0.310 greenY: 0.550
[ 26.409] (II) fglrx(0): blueX: 0.155 blueY: 0.135 whiteX: 0.313 whiteY: 0.329
[ 26.409] (II) fglrx(0): Manufacturer's mask: 0
[ 26.409] (II) fglrx(0): Supported detailed timing:
[ 26.409] (II) fglrx(0): clock: 75.1 MHz Image Size: 309 x 174 mm
[ 26.409] (II) fglrx(0): h_active: 1366 h_sync: 1414 h_sync_end 1446 h_blank_end 1572 h_border: 0
[ 26.409] (II) fglrx(0): v_active: 768 v_sync: 770 v_sync_end 775 v_blanking: 796 v_border: 0
[ 26.409] (II) fglrx(0): Supported detailed timing:
[ 26.409] (II) fglrx(0): clock: 50.0 MHz Image Size: 309 x 174 mm
[ 26.409] (II) fglrx(0): h_active: 1366 h_sync: 1414 h_sync_end 1446 h_blank_end 1572 h_border: 0
[ 26.409] (II) fglrx(0): v_active: 768 v_sync: 770 v_sync_end 775 v_blanking: 796 v_border: 0
[ 26.409] (II) fglrx(0): SAMSUNG
[ 26.409] (II) fglrx(0): 140AT11-L01
[ 26.409] (II) fglrx(0): EDID (in hex):
[ 26.410] (II) fglrx(0): 00ffffffffffff004ca3493001000000
[ 26.410] (II) fglrx(0): 0013010380201378ea87e594574f8c27
[ 26.410] (II) fglrx(0): 22505400000001010101010101010101
[ 26.410] (II) fglrx(0): 010101010101541d56ce50001c303020
[ 26.410] (II) fglrx(0): 250035ae100000198d1356ce50001c30
[ 26.410] (II) fglrx(0): 3020250035ae10000019000000fe0053
[ 26.410] (II) fglrx(0): 414d53554e470a2020202020000000fe
[ 26.410] (II) fglrx(0): 00313430415431312d4c30310a20005b
[ 26.410] (II) fglrx(0): End of Display0 EDID data --------------------
[ 26.410] (II) fglrx(0): Dynamic Surface Resizing Enabled
[ 26.411] (II) fglrx(0): EDID for output LVDS
[ 26.411] (II) fglrx(0): Manufacturer: SEC Model: 3049 Serial#: 1
[ 26.411] (II) fglrx(0): Year: 2009 Week: 0
[ 26.411] (II) fglrx(0): EDID Version: 1.3
[ 26.411] (II) fglrx(0): Digital Display Input
[ 26.411] (II) fglrx(0): Max Image Size [cm]: horiz.: 32 vert.: 19
[ 26.411] (II) fglrx(0): Gamma: 2.20
[ 26.411] (II) fglrx(0): DPMS capabilities: StandBy Suspend Off
[ 26.412] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 26.412] (II) fglrx(0): First detailed timing is preferred mode
[ 26.412] (II) fglrx(0): redX: 0.580 redY: 0.340 greenX: 0.310 greenY: 0.550
[ 26.412] (II) fglrx(0): blueX: 0.155 blueY: 0.135 whiteX: 0.313 whiteY: 0.329
[ 26.412] (II) fglrx(0): Manufacturer's mask: 0
[ 26.412] (II) fglrx(0): Supported detailed timing:
[ 26.412] (II) fglrx(0): clock: 75.1 MHz Image Size: 309 x 174 mm
[ 26.412] (II) fglrx(0): h_active: 1366 h_sync: 1414 h_sync_end 1446 h_blank_end 1572 h_border: 0
[ 26.412] (II) fglrx(0): v_active: 768 v_sync: 770 v_sync_end 775 v_blanking: 796 v_border: 0
[ 26.412] (II) fglrx(0): Supported detailed timing:
[ 26.412] (II) fglrx(0): clock: 50.0 MHz Image Size: 309 x 174 mm
[ 26.412] (II) fglrx(0): h_active: 1366 h_sync: 1414 h_sync_end 1446 h_blank_end 1572 h_border: 0
[ 26.412] (II) fglrx(0): v_active: 768 v_sync: 770 v_sync_end 775 v_blanking: 796 v_border: 0
[ 26.412] (II) fglrx(0): SAMSUNG
[ 26.412] (II) fglrx(0): 140AT11-L01
[ 26.412] (II) fglrx(0): EDID (in hex):
[ 26.412] (II) fglrx(0): 00ffffffffffff004ca3493001000000
[ 26.412] (II) fglrx(0): 0013010380201378ea87e594574f8c27
[ 26.412] (II) fglrx(0): 22505400000001010101010101010101
[ 26.412] (II) fglrx(0): 010101010101541d56ce50001c303020
[ 26.412] (II) fglrx(0): 250035ae100000198d1356ce50001c30
[ 26.412] (II) fglrx(0): 3020250035ae10000019000000fe0053
[ 26.412] (II) fglrx(0): 414d53554e470a2020202020000000fe
[ 26.412] (II) fglrx(0): 00313430415431312d4c30310a20005b
[ 26.412] (II) fglrx(0): EDID vendor "SEC", prod id 12361
[ 26.412] (II) fglrx(0): Printing DDC gathered Modelines:
[ 26.412] (II) fglrx(0): Modeline "1366x768"x0.0 75.08 1366 1414 1446 1572 768 770 775 796 -hsync -vsync (47.8 kHz eP)
[ 26.412] (II) fglrx(0): Modeline "1366x768"x0.0 50.05 1366 1414 1446 1572 768 770 775 796 -hsync -vsync (31.8 kHz e)
[ 26.412] (II) fglrx(0): Printing probed modes for output LVDS
[ 26.412] (II) fglrx(0): Modeline "1366x768"x60.0 75.08 1366 1414 1446 1572 768 770 775 796 -hsync -vsync (47.8 kHz eP)
[ 26.412] (II) fglrx(0): Modeline "1366x768"x40.0 50.05 1366 1414 1446 1572 768 770 775 796 -hsync -vsync (31.8 kHz e)
[ 26.412] (II) fglrx(0): Modeline "1360x768"x60.0 75.08 1360 1414 1446 1572 768 770 775 796 -hsync -vsync (47.8 kHz e)
[ 26.412] (II) fglrx(0): Modeline "1360x768"x40.0 50.05 1360 1414 1446 1572 768 770 775 796 -hsync -vsync (31.8 kHz e)
[ 26.412] (II) fglrx(0): Modeline "1280x768"x60.0 75.08 1280 1414 1446 1572 768 770 775 796 -hsync -vsync (47.8 kHz e)
[ 26.412] (II) fglrx(0): Modeline "1280x768"x40.0 50.05 1280 1414 1446 1572 768 770 775 796 -hsync -vsync (31.8 kHz e)
[ 26.412] (II) fglrx(0): Modeline "1280x720"x60.0 75.08 1280 1414 1446 1572 720 770 775 796 -hsync -vsync (47.8 kHz e)
[ 26.412] (II) fglrx(0): Modeline "1280x720"x40.0 50.05 1280 1414 1446 1572 720 770 775 796 -hsync -vsync (31.8 kHz e)
[ 26.412] (II) fglrx(0): Modeline "1024x768"x60.0 75.08 1024 1414 1446 1572 768 770 775 796 -hsync -vsync (47.8 kHz e)
[ 26.412] (II) fglrx(0): Modeline "1024x768"x40.0 50.05 1024 1414 1446 1572 768 770 775 796 -hsync -vsync (31.8 kHz e)
[ 26.412] (II) fglrx(0): Modeline "1024x600"x60.0 75.08 1024 1414 1446 1572 600 770 775 796 -hsync -vsync (47.8 kHz e)
[ 26.413] (II) fglrx(0): Modeline "1024x600"x40.0 50.05 1024 1414 1446 1572 600 770 775 796 -hsync -vsync (31.8 kHz e)
[ 26.413] (II) fglrx(0): Modeline "800x600"x60.0 75.08 800 1414 1446 1572 600 770 775 796 -hsync -vsync (47.8 kHz e)
[ 26.413] (II) fglrx(0): Modeline "800x600"x40.0 50.05 800 1414 1446 1572 600 770 775 796 -hsync -vsync (31.8 kHz e)
[ 26.413] (II) fglrx(0): Modeline "800x480"x60.0 75.08 800 1414 1446 1572 480 770 775 796 -hsync -vsync (47.8 kHz e)
[ 26.413] (II) fglrx(0): Modeline "800x480"x40.0 50.05 800 1414 1446 1572 480 770 775 796 -hsync -vsync (31.8 kHz e)
[ 26.413] (II) fglrx(0): Modeline "640x480"x60.0 75.08 640 1414 1446 1572 480 770 775 796 -hsync -vsync (47.8 kHz e)
[ 26.413] (II) fglrx(0): Modeline "640x480"x40.0 50.05 640 1414 1446 1572 480 770 775 796 -hsync -vsync (31.8 kHz e)
[ 26.413] (II) fglrx(0): EDID for output DFP1
[ 26.413] (II) fglrx(0): EDID for output CRT1
[ 26.413] (II) fglrx(0): Output LVDS connected
[ 26.413] (II) fglrx(0): Output DFP1 disconnected
[ 26.413] (II) fglrx(0): Output CRT1 disconnected
[ 26.413] (II) fglrx(0): Using exact sizes for initial modes
[ 26.413] (II) fglrx(0): Output LVDS using initial mode 1366x768
[ 26.413] (II) fglrx(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 26.413] (II) fglrx(0): Display dimensions: (320, 190) mm
[ 26.413] (II) fglrx(0): DPI set to (108, 102)
[ 26.413] (II) fglrx(0): Eyefinity capable adapter detected.
[ 26.413] (II) fglrx(0): Adapter AMD Mobility Radeon HD 5000 Series has 6 configurable heads and 1 displays connected.
[ 26.413] (==) fglrx(0): PseudoColor visuals disabled
[ 26.413] (II) Loading sub module "ramdac"
[ 26.413] (II) LoadModule: "ramdac"
[ 26.413] (II) Module "ramdac" already built-in
[ 26.413] (==) fglrx(0): NoDRI = NO
[ 26.413] (==) fglrx(0): Capabilities: 0x00000000
[ 26.413] (==) fglrx(0): CapabilitiesEx: 0x00000000
[ 26.413] (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
[ 26.413] (==) fglrx(0): UseFastTLS=0
[ 26.413] (II) fglrx(0): Desktop Vsync is enabled.
[ 26.413] (II) fglrx(0): Shadow Primary option: ShadowPrimary is enabled
[ 26.413] (--) Depth 24 pixmap format is 32 bpp
[ 26.413] Loading extension ATIFGLRXDRI
[ 26.413] (II) fglrx(0): doing swlDriScreenInit
[ 26.413] (II) fglrx(0): swlDriScreenInit for fglrx driver
[ 26.413] ukiDynamicMajor: found major device number 250
[ 26.413] ukiDynamicMajor: found major device number 250
[ 26.414] ukiDynamicMajor: found major device number 250
[ 26.414] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 26.414] ukiOpenDevice: node name is /dev/ati/card0
[ 26.414] ukiOpenDevice: open result is 12, (OK)
[ 26.414] ukiOpenByBusid: ukiOpenMinor returns 12
[ 26.414] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 26.414] (II) fglrx(0): [uki] DRM interface version 1.0
[ 26.414] (II) fglrx(0): [uki] created "fglrx" driver at busid "PCI:1:0:0"
[ 26.414] (II) fglrx(0): [uki] added 8192 byte SAREA at 0x2000
[ 26.414] (II) fglrx(0): [uki] mapped SAREA 0x2000 to 0x7fccbacb5000
[ 26.414] (II) fglrx(0): [uki] framebuffer handle = 0x3000
[ 26.414] (II) fglrx(0): [uki] added 1 reserved context for kernel
[ 26.414] (II) fglrx(0): swlDriScreenInit done
[ 26.414] (II) fglrx(0): Kernel Module Version Information:
[ 26.414] (II) fglrx(0): Name: fglrx
[ 26.414] (II) fglrx(0): Version: 13.35.5
[ 26.414] (II) fglrx(0): Date: Feb 23 2014
[ 26.414] (II) fglrx(0): Desc: AMD FireGL DRM kernel module
[ 26.414] (II) fglrx(0): Kernel Module version matches driver.
[ 26.414] (II) fglrx(0): Kernel Module Build Time Information:
[ 26.414] (II) fglrx(0): Build-Kernel UTS_RELEASE: 3.13.6-1-ARCH
[ 26.414] (II) fglrx(0): Build-Kernel MODVERSIONS: yes
[ 26.414] (II) fglrx(0): Build-Kernel __SMP__: yes
[ 26.414] (II) fglrx(0): Build-Kernel PAGE_SIZE: 0x1000
[ 26.414] (II) fglrx(0): [uki] register handle = 0x00004000
[ 26.433] (II) fglrx(0): DRI initialization successfull
[ 26.461] (II) fglrx(0): FBADPhys: 0xf00000000 FBMappedSize: 0x01080000
[ 26.474] (==) fglrx(0): Backing store enabled
[ 26.474] Loading extension FGLRXEXTENSION
[ 26.474] (**) fglrx(0): DPMS enabled
[ 26.474] (II) fglrx(0): Initialized in-driver Xinerama extension
[ 26.474] (**) fglrx(0): Textured Video is enabled.
[ 26.475] (II) LoadModule: "glesx"
[ 26.475] (II) Loading /usr/lib/xorg/modules/glesx.so
[ 26.625] (II) Module glesx: vendor="X.Org Foundation"
[ 26.625] compiled for 1.4.99.906, module version = 1.0.0
[ 26.625] Loading extension GLESX
[ 26.625] (II) fglrx(0): GLESX enableFlags = 8784
[ 26.630] (II) fglrx(0): GLESX is enabled
[ 26.630] (II) LoadModule: "amdxmm"
[ 26.630] (II) Loading /usr/lib/xorg/modules/amdxmm.so
[ 26.641] (II) Module amdxmm: vendor="X.Org Foundation"
[ 26.641] compiled for 1.4.99.906, module version = 2.0.0
[ 26.653] Loading extension AMDXVOPL
[ 26.653] Loading extension AMDXVBA
[ 26.685] (II) fglrx(0): UVD feature is enabled(II) fglrx(0):
[ 26.688] (II) fglrx(0): Enable composite support successfully
[ 26.688] (WW) fglrx(0): Option "VendorName" is not used
[ 26.688] (WW) fglrx(0): Option "ModelName" is not used
[ 26.688] (II) fglrx(0): X context handle = 0x1
[ 26.688] (II) fglrx(0): [DRI] installation complete
[ 26.688] (==) fglrx(0): Silken mouse enabled
[ 26.708] (==) fglrx(0): Using HW cursor of display infrastructure!
[ 26.708] (II) fglrx(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 26.711] (II) fglrx(0): 'LVDS LCD' ConnectorType, abstracted as 'Panel'
[ 26.711] (II) fglrx(0): 'eDP LCD' ConnectorType, abstracted as 'Panel'
[ 27.675] (--) RandR disabled
[ 27.762] ukiDynamicMajor: found major device number 250
[ 27.762] ukiDynamicMajor: found major device number 250
[ 27.762] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 27.762] ukiOpenDevice: node name is /dev/ati/card0
[ 27.762] ukiOpenDevice: open result is 13, (OK)
[ 27.762] ukiOpenByBusid: ukiOpenMinor returns 13
[ 27.762] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 27.762] (EE) AIGLX error: failed to open /usr/X11R6/lib64/modules/dri/fglrx_dri.so, error[/usr/X11R6/lib64/modules/dri/fglrx_dri.so: cannot open shared object file: No such file or directory]
[ 28.135] ukiDynamicMajor: found major device number 250
[ 28.135] ukiDynamicMajor: found major device number 250
[ 28.135] ukiDynamicMajor: found major device number 250
[ 28.135] ukiOpenDevice: node name is /dev/ati/card0
[ 28.135] ukiOpenDevice: open result is 14, (OK)
[ 28.135] ukiGetBusid returned 'PCI:1:0:0'
[ 28.135] ukiOpenDevice: node name is /dev/ati/card1
[ 28.135] ukiOpenDevice: open result is -1, (No such device)
[ 28.135] ukiOpenDevice: open result is -1, (No such device)
[ 28.135] ukiOpenDevice: Open failed
[ 28.135] ukiOpenDevice: node name is /dev/ati/card2
[ 28.135] ukiOpenDevice: open result is -1, (No such device)
[ 28.136] ukiOpenDevice: open result is -1, (No such device)
[ 28.136] ukiOpenDevice: Open failed
[ 28.136] ukiOpenDevice: node name is /dev/ati/card3
[ 28.136] ukiOpenDevice: open result is -1, (No such device)
[ 28.136] ukiOpenDevice: open result is -1, (No such device)
[ 28.136] ukiOpenDevice: Open failed
[ 28.136] ukiOpenDevice: node name is /dev/ati/card4
[ 28.136] ukiOpenDevice: open result is -1, (No such device)
[ 28.136] ukiOpenDevice: open result is -1, (No such device)
[ 28.136] ukiOpenDevice: Open failed
[ 28.136] ukiOpenDevice: node name is /dev/ati/card5
[ 28.136] ukiOpenDevice: open result is -1, (No such device)
[ 28.136] ukiOpenDevice: open result is -1, (No such device)
[ 28.136] ukiOpenDevice: Open failed
[ 28.136] ukiOpenDevice: node name is /dev/ati/card6
[ 28.136] ukiOpenDevice: open result is -1, (No such device)
[ 28.136] ukiOpenDevice: open result is -1, (No such device)
[ 28.136] ukiOpenDevice: Open failed
[ 28.136] ukiOpenDevice: node name is /dev/ati/card7
[ 28.136] ukiOpenDevice: open result is -1, (No such device)
[ 28.136] ukiOpenDevice: open result is -1, (No such device)
[ 28.136] ukiOpenDevice: Open failed
[ 28.136] ukiOpenDevice: node name is /dev/ati/card8
[ 28.136] ukiOpenDevice: open result is -1, (No such device)
[ 28.136] ukiOpenDevice: open result is -1, (No such device)
[ 28.136] ukiOpenDevice: Open failed
[ 28.136] ukiOpenDevice: node name is /dev/ati/card9
[ 28.136] ukiOpenDevice: open result is -1, (No such device)
[ 28.136] ukiOpenDevice: open result is -1, (No such device)
[ 28.136] ukiOpenDevice: Open failed
[ 28.136] ukiOpenDevice: node name is /dev/ati/card10
[ 28.136] ukiOpenDevice: open result is -1, (No such device)
[ 28.137] ukiOpenDevice: open result is -1, (No such device)
[ 28.137] ukiOpenDevice: Open failed
[ 28.137] ukiOpenDevice: node name is /dev/ati/card11
[ 28.137] ukiOpenDevice: open result is -1, (No such device)
[ 28.137] ukiOpenDevice: open result is -1, (No such device)
[ 28.137] ukiOpenDevice: Open failed
[ 28.137] ukiOpenDevice: node name is /dev/ati/card12
[ 28.137] ukiOpenDevice: open result is -1, (No such device)
[ 28.137] ukiOpenDevice: open result is -1, (No such device)
[ 28.137] ukiOpenDevice: Open failed
[ 28.137] ukiOpenDevice: node name is /dev/ati/card13
[ 28.137] ukiOpenDevice: open result is -1, (No such device)
[ 28.137] ukiOpenDevice: open result is -1, (No such device)
[ 28.137] ukiOpenDevice: Open failed
[ 28.137] ukiOpenDevice: node name is /dev/ati/card14
[ 28.137] ukiOpenDevice: open result is -1, (No such device)
[ 28.137] ukiOpenDevice: open result is -1, (No such device)
[ 28.137] ukiOpenDevice: Open failed
[ 28.137] ukiOpenDevice: node name is /dev/ati/card15
[ 28.137] ukiOpenDevice: open result is -1, (No such device)
[ 28.137] ukiOpenDevice: open result is -1, (No such device)
[ 28.137] ukiOpenDevice: Open failed
[ 28.137] ukiDynamicMajor: found major device number 250
[ 28.137] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 28.137] ukiOpenDevice: node name is /dev/ati/card0
[ 28.137] ukiOpenDevice: open result is 14, (OK)
[ 28.137] ukiOpenByBusid: ukiOpenMinor returns 14
[ 28.137] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 28.908] (II) AIGLX: Loaded and initialized OpenGL driver(II) GLX: Initialized DRI GL provider for screen 0
[ 28.909] ukiDynamicMajor: found major device number 250
[ 28.909] ukiDynamicMajor: found major device number 250
[ 28.909] ukiDynamicMajor: found major device number 250
[ 28.909] ukiOpenDevice: node name is /dev/ati/card0
[ 28.909] ukiOpenDevice: open result is 15, (OK)
[ 28.909] ukiGetBusid returned 'PCI:1:0:0'
[ 28.909] ukiOpenDevice: node name is /dev/ati/card1
[ 28.909] ukiOpenDevice: open result is -1, (No such device)
[ 28.909] ukiOpenDevice: open result is -1, (No such device)
[ 28.909] ukiOpenDevice: Open failed
[ 28.909] ukiOpenDevice: node name is /dev/ati/card2
[ 28.909] ukiOpenDevice: open result is -1, (No such device)
[ 28.909] ukiOpenDevice: open result is -1, (No such device)
[ 28.909] ukiOpenDevice: Open failed
[ 28.909] ukiOpenDevice: node name is /dev/ati/card3
[ 28.909] ukiOpenDevice: open result is -1, (No such device)
[ 28.909] ukiOpenDevice: open result is -1, (No such device)
[ 28.909] ukiOpenDevice: Open failed
[ 28.909] ukiOpenDevice: node name is /dev/ati/card4
[ 28.909] ukiOpenDevice: open result is -1, (No such device)
[ 28.909] ukiOpenDevice: open result is -1, (No such device)
[ 28.909] ukiOpenDevice: Open failed
[ 28.909] ukiOpenDevice: node name is /dev/ati/card5
[ 28.909] ukiOpenDevice: open result is -1, (No such device)
[ 28.909] ukiOpenDevice: open result is -1, (No such device)
[ 28.909] ukiOpenDevice: Open failed
[ 28.909] ukiOpenDevice: node name is /dev/ati/card6
[ 28.909] ukiOpenDevice: open result is -1, (No such device)
[ 28.909] ukiOpenDevice: open result is -1, (No such device)
[ 28.909] ukiOpenDevice: Open failed
[ 28.909] ukiOpenDevice: node name is /dev/ati/card7
[ 28.909] ukiOpenDevice: open result is -1, (No such device)
[ 28.909] ukiOpenDevice: open result is -1, (No such device)
[ 28.909] ukiOpenDevice: Open failed
[ 28.909] ukiOpenDevice: node name is /dev/ati/card8
[ 28.909] ukiOpenDevice: open result is -1, (No such device)
[ 28.909] ukiOpenDevice: open result is -1, (No such device)
[ 28.909] ukiOpenDevice: Open failed
[ 28.909] ukiOpenDevice: node name is /dev/ati/card9
[ 28.909] ukiOpenDevice: open result is -1, (No such device)
[ 28.909] ukiOpenDevice: open result is -1, (No such device)
[ 28.909] ukiOpenDevice: Open failed
[ 28.909] ukiOpenDevice: node name is /dev/ati/card10
[ 28.909] ukiOpenDevice: open result is -1, (No such device)
[ 28.909] ukiOpenDevice: open result is -1, (No such device)
[ 28.909] ukiOpenDevice: Open failed
[ 28.909] ukiOpenDevice: node name is /dev/ati/card11
[ 28.909] ukiOpenDevice: open result is -1, (No such device)
[ 28.909] ukiOpenDevice: open result is -1, (No such device)
[ 28.909] ukiOpenDevice: Open failed
[ 28.909] ukiOpenDevice: node name is /dev/ati/card12
[ 28.909] ukiOpenDevice: open result is -1, (No such device)
[ 28.909] ukiOpenDevice: open result is -1, (No such device)
[ 28.909] ukiOpenDevice: Open failed
[ 28.909] ukiOpenDevice: node name is /dev/ati/card13
[ 28.909] ukiOpenDevice: open result is -1, (No such device)
[ 28.909] ukiOpenDevice: open result is -1, (No such device)
[ 28.909] ukiOpenDevice: Open failed
[ 28.909] ukiOpenDevice: node name is /dev/ati/card14
[ 28.909] ukiOpenDevice: open result is -1, (No such device)
[ 28.909] ukiOpenDevice: open result is -1, (No such device)
[ 28.909] ukiOpenDevice: Open failed
[ 28.909] ukiOpenDevice: node name is /dev/ati/card15
[ 28.909] ukiOpenDevice: open result is -1, (No such device)
[ 28.909] ukiOpenDevice: open result is -1, (No such device)
[ 28.909] ukiOpenDevice: Open failed
[ 28.910] ukiDynamicMajor: found major device number 250
[ 28.910] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 28.910] ukiOpenDevice: node name is /dev/ati/card0
[ 28.910] ukiOpenDevice: open result is 15, (OK)
[ 28.910] ukiOpenByBusid: ukiOpenMinor returns 15
[ 28.910] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 29.008] (II) fglrx(0): Desktop Vsync is enabled.
[ 29.008] (II) fglrx(0): TFD direct rotation is possible with 90/180/270 rotation
[ 29.008] (II) fglrx(0): Setting screen physical size to 361 x 203
[ 29.330] (II) config/udev: Adding input device Power Button (/dev/input/event5)
[ 29.330] (**) Power Button: Applying InputClass "system-keyboard"
[ 29.330] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 29.330] (II) LoadModule: "evdev"
[ 29.330] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 29.353] (II) Module evdev: vendor="X.Org Foundation"
[ 29.353] compiled for 1.15.0, module version = 2.8.2
[ 29.353] Module class: X.Org XInput Driver
[ 29.353] ABI class: X.Org XInput driver, version 20.0
[ 29.353] (II) Using input driver 'evdev' for 'Power Button'
[ 29.353] (**) Power Button: always reports core events
[ 29.353] (**) evdev: Power Button: Device: "/dev/input/event5"
[ 29.353] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 29.353] (--) evdev: Power Button: Found keys
[ 29.353] (II) evdev: Power Button: Configuring as keyboard
[ 29.353] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input9/event5"
[ 29.353] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 29.353] (**) Option "xkb_rules" "evdev"
[ 29.353] (**) Option "xkb_model" "pc104"
[ 29.353] (**) Option "xkb_layout" "us,cn"
[ 29.353] (**) Option "xkb_variant" ","
[ 29.399] (II) config/udev: Adding input device Video Bus (/dev/input/event6)
[ 29.399] (**) Video Bus: Applying InputClass "system-keyboard"
[ 29.399] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 29.399] (II) Using input driver 'evdev' for 'Video Bus'
[ 29.399] (**) Video Bus: always reports core events
[ 29.399] (**) evdev: Video Bus: Device: "/dev/input/event6"
[ 29.399] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 29.399] (--) evdev: Video Bus: Found keys
[ 29.399] (II) evdev: Video Bus: Configuring as keyboard
[ 29.399] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input10/event6"
[ 29.399] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 29.399] (**) Option "xkb_rules" "evdev"
[ 29.399] (**) Option "xkb_model" "pc104"
[ 29.399] (**) Option "xkb_layout" "us,cn"
[ 29.399] (**) Option "xkb_variant" ","
[ 29.400] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 29.400] (**) Power Button: Applying InputClass "system-keyboard"
[ 29.400] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 29.400] (II) Using input driver 'evdev' for 'Power Button'
[ 29.400] (**) Power Button: always reports core events
[ 29.400] (**) evdev: Power Button: Device: "/dev/input/event3"
[ 29.400] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 29.400] (--) evdev: Power Button: Found keys
[ 29.400] (II) evdev: Power Button: Configuring as keyboard
[ 29.400] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input7/event3"
[ 29.400] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 29.400] (**) Option "xkb_rules" "evdev"
[ 29.400] (**) Option "xkb_model" "pc104"
[ 29.400] (**) Option "xkb_layout" "us,cn"
[ 29.400] (**) Option "xkb_variant" ","
[ 29.401] (II) config/udev: Adding input device Lid Switch (/dev/input/event2)
[ 29.401] (II) No input driver specified, ignoring this device.
[ 29.401] (II) This device may have been added with another device file.
[ 29.402] (II) config/udev: Adding input device Sleep Button (/dev/input/event4)
[ 29.402] (**) Sleep Button: Applying InputClass "system-keyboard"
[ 29.402] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 29.402] (II) Using input driver 'evdev' for 'Sleep Button'
[ 29.402] (**) Sleep Button: always reports core events
[ 29.402] (**) evdev: Sleep Button: Device: "/dev/input/event4"
[ 29.402] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 29.402] (--) evdev: Sleep Button: Found keys
[ 29.402] (II) evdev: Sleep Button: Configuring as keyboard
[ 29.402] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input8/event4"
[ 29.402] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[ 29.402] (**) Option "xkb_rules" "evdev"
[ 29.402] (**) Option "xkb_model" "pc104"
[ 29.402] (**) Option "xkb_layout" "us,cn"
[ 29.402] (**) Option "xkb_variant" ","
[ 29.403] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=3 (/dev/input/event10)
[ 29.403] (II) No input driver specified, ignoring this device.
[ 29.403] (II) This device may have been added with another device file.
[ 29.403] (II) config/udev: Adding input device MLK RAPOO 1200 (/dev/input/event1)
[ 29.404] (**) MLK RAPOO 1200: Applying InputClass "system-keyboard"
[ 29.404] (**) MLK RAPOO 1200: Applying InputClass "evdev pointer catchall"
[ 29.404] (**) MLK RAPOO 1200: Applying InputClass "evdev keyboard catchall"
[ 29.404] (II) Using input driver 'evdev' for 'MLK RAPOO 1200'
[ 29.404] (**) MLK RAPOO 1200: always reports core events
[ 29.404] (**) evdev: MLK RAPOO 1200: Device: "/dev/input/event1"
[ 29.404] (--) evdev: MLK RAPOO 1200: Vendor 0x1bcf Product 0x501
[ 29.404] (--) evdev: MLK RAPOO 1200: Found 9 mouse buttons
[ 29.404] (--) evdev: MLK RAPOO 1200: Found scroll wheel(s)
[ 29.404] (--) evdev: MLK RAPOO 1200: Found relative axes
[ 29.404] (--) evdev: MLK RAPOO 1200: Found x and y relative axes
[ 29.404] (--) evdev: MLK RAPOO 1200: Found absolute axes
[ 29.404] (II) evdev: MLK RAPOO 1200: Forcing absolute x/y axes to exist.
[ 29.404] (--) evdev: MLK RAPOO 1200: Found keys
[ 29.404] (II) evdev: MLK RAPOO 1200: Configuring as mouse
[ 29.404] (II) evdev: MLK RAPOO 1200: Configuring as keyboard
[ 29.404] (II) evdev: MLK RAPOO 1200: Adding scrollwheel support
[ 29.404] (**) evdev: MLK RAPOO 1200: YAxisMapping: buttons 4 and 5
[ 29.404] (**) evdev: MLK RAPOO 1200: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 29.404] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input5/event1"
[ 29.404] (II) XINPUT: Adding extended input device "MLK RAPOO 1200" (type: KEYBOARD, id 10)
[ 29.404] (**) Option "xkb_rules" "evdev"
[ 29.404] (**) Option "xkb_model" "pc104"
[ 29.404] (**) Option "xkb_layout" "us,cn"
[ 29.404] (**) Option "xkb_variant" ","
[ 29.404] (II) evdev: MLK RAPOO 1200: initialized for relative axes.
[ 29.404] (WW) evdev: MLK RAPOO 1200: ignoring absolute axes.
[ 29.405] (**) MLK RAPOO 1200: (accel) keeping acceleration scheme 1
[ 29.405] (**) MLK RAPOO 1200: (accel) acceleration profile 0
[ 29.405] (**) MLK RAPOO 1200: (accel) acceleration factor: 2.000
[ 29.405] (**) MLK RAPOO 1200: (accel) acceleration threshold: 4
[ 29.405] (II) config/udev: Adding input device MLK RAPOO 1200 (/dev/input/mouse0)
[ 29.405] (**) MLK RAPOO 1200: Applying InputClass "system-keyboard"
[ 29.405] (II) No input driver specified, ignoring this device.
[ 29.405] (II) This device may have been added with another device file.
[ 29.406] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event7)
[ 29.406] (II) No input driver specified, ignoring this device.
[ 29.406] (II) This device may have been added with another device file.
[ 29.406] (II) config/udev: Adding input device HDA Intel MID Mic (/dev/input/event9)
[ 29.406] (II) No input driver specified, ignoring this device.
[ 29.406] (II) This device may have been added with another device file.
[ 29.407] (II) config/udev: Adding input device HDA Intel MID Headphone (/dev/input/event8)
[ 29.407] (II) No input driver specified, ignoring this device.
[ 29.407] (II) This device may have been added with another device file.
[ 29.407] (II) config/udev: Adding input device Lenovo EasyCamera (/dev/input/event14)
[ 29.407] (**) Lenovo EasyCamera: Applying InputClass "system-keyboard"
[ 29.407] (**) Lenovo EasyCamera: Applying InputClass "evdev keyboard catchall"
[ 29.407] (II) Using input driver 'evdev' for 'Lenovo EasyCamera'
[ 29.407] (**) Lenovo EasyCamera: always reports core events
[ 29.407] (**) evdev: Lenovo EasyCamera: Device: "/dev/input/event14"
[ 29.407] (--) evdev: Lenovo EasyCamera: Vendor 0x5986 Product 0x190
[ 29.407] (--) evdev: Lenovo EasyCamera: Found keys
[ 29.407] (II) evdev: Lenovo EasyCamera: Configuring as keyboard
[ 29.407] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.0/input/input21/event14"
[ 29.407] (II) XINPUT: Adding extended input device "Lenovo EasyCamera" (type: KEYBOARD, id 11)
[ 29.407] (**) Option "xkb_rules" "evdev"
[ 29.407] (**) Option "xkb_model" "pc104"
[ 29.407] (**) Option "xkb_layout" "us,cn"
[ 29.407] (**) Option "xkb_variant" ","
[ 29.407] (II) config/udev: Adding input device Ideapad extra buttons (/dev/input/event11)
[ 29.407] (**) Ideapad extra buttons: Applying InputClass "system-keyboard"
[ 29.407] (**) Ideapad extra buttons: Applying InputClass "evdev keyboard catchall"
[ 29.407] (II) Using input driver 'evdev' for 'Ideapad extra buttons'
[ 29.407] (**) Ideapad extra buttons: always reports core events
[ 29.407] (**) evdev: Ideapad extra buttons: Device: "/dev/input/event11"
[ 29.407] (--) evdev: Ideapad extra buttons: Vendor 0 Product 0
[ 29.407] (--) evdev: Ideapad extra buttons: Found keys
[ 29.407] (II) evdev: Ideapad extra buttons: Configuring as keyboard
[ 29.407] (**) Option "config_info" "udev:/sys/devices/platform/VPC2004:00/input/input18/event11"
[ 29.407] (II) XINPUT: Adding extended input device "Ideapad extra buttons" (type: KEYBOARD, id 12)
[ 29.408] (**) Option "xkb_rules" "evdev"
[ 29.408] (**) Option "xkb_model" "pc104"
[ 29.408] (**) Option "xkb_layout" "us,cn"
[ 29.408] (**) Option "xkb_variant" ","
[ 29.408] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 29.408] (**) AT Translated Set 2 keyboard: Applying InputClass "system-keyboard"
[ 29.408] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 29.408] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 29.408] (**) AT Translated Set 2 keyboard: always reports core events
[ 29.408] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 29.408] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 29.408] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 29.408] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 29.408] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 29.408] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 13)
[ 29.408] (**) Option "xkb_rules" "evdev"
[ 29.408] (**) Option "xkb_model" "pc104"
[ 29.408] (**) Option "xkb_layout" "us,cn"
[ 29.408] (**) Option "xkb_variant" ","
[ 29.409] (II) config/udev: Adding input device PS/2 Generic Mouse (/dev/input/event12)
[ 29.409] (**) PS/2 Generic Mouse: Applying InputClass "evdev pointer catchall"
[ 29.409] (II) Using input driver 'evdev' for 'PS/2 Generic Mouse'
[ 29.409] (**) PS/2 Generic Mouse: always reports core events
[ 29.409] (**) evdev: PS/2 Generic Mouse: Device: "/dev/input/event12"
[ 29.409] (--) evdev: PS/2 Generic Mouse: Vendor 0x2 Product 0x1
[ 29.409] (--) evdev: PS/2 Generic Mouse: Found 3 mouse buttons
[ 29.409] (--) evdev: PS/2 Generic Mouse: Found relative axes
[ 29.409] (--) evdev: PS/2 Generic Mouse: Found x and y relative axes
[ 29.409] (II) evdev: PS/2 Generic Mouse: Configuring as mouse
[ 29.409] (**) evdev: PS/2 Generic Mouse: YAxisMapping: buttons 4 and 5
[ 29.409] (**) evdev: PS/2 Generic Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 29.409] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio3/input/input13/event12"
[ 29.409] (II) XINPUT: Adding extended input device "PS/2 Generic Mouse" (type: MOUSE, id 14)
[ 29.409] (II) evdev: PS/2 Generic Mouse: initialized for relative axes.
[ 29.409] (**) PS/2 Generic Mouse: (accel) keeping acceleration scheme 1
[ 29.409] (**) PS/2 Generic Mouse: (accel) acceleration profile 0
[ 29.409] (**) PS/2 Generic Mouse: (accel) acceleration factor: 2.000
[ 29.409] (**) PS/2 Generic Mouse: (accel) acceleration threshold: 4
[ 29.409] (II) config/udev: Adding input device PS/2 Generic Mouse (/dev/input/mouse1)
[ 29.409] (II) No input driver specified, ignoring this device.
[ 29.409] (II) This device may have been added with another device file.
[ 29.409] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event15)
[ 29.409] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 29.409] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 29.409] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[ 29.409] (II) LoadModule: "synaptics"
[ 29.409] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 29.411] (II) Module synaptics: vendor="X.Org Foundation"
[ 29.411] compiled for 1.15.0, module version = 1.7.3
[ 29.411] Module class: X.Org XInput Driver
[ 29.411] ABI class: X.Org XInput driver, version 20.0
[ 29.411] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[ 29.411] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 29.411] (**) Option "Device" "/dev/input/event15"
[ 29.526] (II) synaptics: SynPS/2 Synaptics TouchPad: ignoring touch events for semi-multitouch device
[ 29.527] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5632 (res 62)
[ 29.527] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4554 (res 110)
[ 29.527] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 29.527] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[ 29.527] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
[ 29.527] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[ 29.527] (**) Option "TapButton1" "1"
[ 29.527] (**) Option "TapButton2" "2"
[ 29.527] (**) Option "TapButton3" "3"
[ 29.527] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 29.527] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 29.586] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio4/input/input19/event15"
[ 29.586] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 15)
[ 29.586] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 29.586] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75
[ 29.586] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.038
[ 29.587] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 29.587] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[ 29.587] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 29.587] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 29.587] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 29.587] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse2)
[ 29.587] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[ 29.587] (II) config/udev: Adding input device PC Speaker (/dev/input/event13)
[ 29.587] (II) No input driver specified, ignoring this device.
[ 29.587] (II) This device may have been added with another device file.
[ 29.596] (II) fglrx(0): Restoring Recent Mode via PCS is not supported in RANDR 1.2 capable environments
[ 30.596] (II) UnloadModule: "synaptics"
[ 30.596] (II) evdev: PS/2 Generic Mouse: Close
[ 30.596] (II) UnloadModule: "evdev"
[ 30.596] (II) evdev: AT Translated Set 2 keyboard: Close
[ 30.596] (II) UnloadModule: "evdev"
[ 30.596] (II) evdev: Ideapad extra buttons: Close
[ 30.596] (II) UnloadModule: "evdev"
[ 30.596] (II) evdev: Lenovo EasyCamera: Close
[ 30.596] (II) UnloadModule: "evdev"
[ 30.596] (II) evdev: MLK RAPOO 1200: Close
[ 30.596] (II) UnloadModule: "evdev"
[ 30.596] (II) evdev: Sleep Button: Close
[ 30.596] (II) UnloadModule: "evdev"
[ 30.596] (II) evdev: Power Button: Close
[ 30.596] (II) UnloadModule: "evdev"
[ 30.596] (II) evdev: Video Bus: Close
[ 30.596] (II) UnloadModule: "evdev"
[ 30.596] (II) evdev: Power Button: Close
[ 30.596] (II) UnloadModule: "evdev"
[ 30.597] (II) fglrx(0): Shutdown CMMQS
[ 30.599] (II) fglrx(0): [uki] removed 1 reserved context for kernel
[ 30.599] (II) fglrx(0): [uki] unmapping 8192 bytes of SAREA 0x2000 at 0x7fccbacb5000
[ 31.676] (EE) Server terminated successfully (0). Closing log file.then i downgrade mesa and startx successfully,here's the Xorg.0.log
[ 22.408]
X.Org X Server 1.15.0
Release Date: 2013-12-27
[ 22.410] X Protocol Version 11, Revision 0
[ 22.411] Build Operating System: Linux 3.12.5-1-ARCH x86_64
[ 22.414] Current Operating System: Linux Empter 3.13.6-1-ARCH #1 SMP PREEMPT Fri Mar 7 22:47:48 CET 2014 x86_64
[ 22.415] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=c09036ad-209f-483e-ad39-eadcf22f6e83 rw quiet
[ 22.417] Build Date: 09 January 2014 08:47:24AM
[ 22.418]
[ 22.418] Current version of pixman: 0.32.4
[ 22.420] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 22.420] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 22.426] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Mar 9 14:04:17 2014
[ 22.484] (==) Using config file: "/etc/X11/xorg.conf"
[ 22.485] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 22.489] (==) ServerLayout "aticonfig Layout"
[ 22.489] (**) |-->Screen "aticonfig-Screen[0]-0" (0)
[ 22.489] (**) | |-->Monitor "aticonfig-Monitor[0]-0"
[ 22.503] (**) | |-->Device "aticonfig-Device[0]-0"
[ 22.503] (==) Automatically adding devices
[ 22.503] (==) Automatically enabling devices
[ 22.503] (==) Automatically adding GPU devices
[ 22.564] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 22.564] Entry deleted from font path.
[ 22.565] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 22.565] Entry deleted from font path.
[ 22.565] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 22.566] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 22.566] Entry deleted from font path.
[ 22.566] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 22.566] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/
[ 22.566] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 22.566] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 22.566] (II) Loader magic: 0x804c80
[ 22.566] (II) Module ABI versions:
[ 22.566] X.Org ANSI C Emulation: 0.4
[ 22.566] X.Org Video Driver: 15.0
[ 22.566] X.Org XInput driver : 20.0
[ 22.566] X.Org Server Extension : 8.0
[ 22.570] (--) PCI:*(0:1:0:0) 1002:68c1:17aa:3928 rev 0, Mem @ 0xd0000000/268435456, 0xe8400000/131072, I/O @ 0x00002000/256, BIOS @ 0x????????/131072
[ 22.570] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 22.582] Initializing built-in extension Generic Event Extension
[ 22.583] Initializing built-in extension SHAPE
[ 22.584] Initializing built-in extension MIT-SHM
[ 22.586] Initializing built-in extension XInputExtension
[ 22.587] Initializing built-in extension XTEST
[ 22.588] Initializing built-in extension BIG-REQUESTS
[ 22.588] Initializing built-in extension SYNC
[ 22.589] Initializing built-in extension XKEYBOARD
[ 22.590] Initializing built-in extension XC-MISC
[ 22.591] Initializing built-in extension SECURITY
[ 22.591] Initializing built-in extension XINERAMA
[ 22.592] Initializing built-in extension XFIXES
[ 22.593] Initializing built-in extension RENDER
[ 22.594] Initializing built-in extension RANDR
[ 22.594] Initializing built-in extension COMPOSITE
[ 22.595] Initializing built-in extension DAMAGE
[ 22.596] Initializing built-in extension MIT-SCREEN-SAVER
[ 22.597] Initializing built-in extension DOUBLE-BUFFER
[ 22.598] Initializing built-in extension RECORD
[ 22.598] Initializing built-in extension DPMS
[ 22.599] Initializing built-in extension Present
[ 22.624] Initializing built-in extension DRI3
[ 22.649] Initializing built-in extension X-Resource
[ 22.674] Initializing built-in extension XVideo
[ 22.699] Initializing built-in extension XVideo-MotionCompensation
[ 22.724] Initializing built-in extension XFree86-VidModeExtension
[ 22.748] Initializing built-in extension XFree86-DGA
[ 22.772] Initializing built-in extension XFree86-DRI
[ 22.796] Initializing built-in extension DRI2
[ 22.796] (II) "glx" will be loaded by default.
[ 22.796] (II) LoadModule: "glx"
[ 23.042] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 23.075] (II) Module glx: vendor="Advanced Micro Devices, Inc."
[ 23.075] compiled for 6.9.0, module version = 1.0.0
[ 23.102] Loading extension GLX
[ 23.102] (II) LoadModule: "fglrx"
[ 23.102] (II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
[ 23.467] (II) Module fglrx: vendor="FireGL - AMD Technologies Inc."
[ 23.467] compiled for 1.4.99.906, module version = 13.35.5
[ 23.467] Module class: X.Org Video Driver
[ 23.468] (II) Loading sub module "fglrxdrm"
[ 23.468] (II) LoadModule: "fglrxdrm"
[ 23.468] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[ 23.517] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
[ 23.517] compiled for 1.4.99.906, module version = 13.35.5
[ 23.517] (II) AMD Proprietary Linux Driver Version Identifier:13.35.5
[ 23.517] (II) AMD Proprietary Linux Driver Release Identifier: UNSUPPORTED-13.35.1005
[ 23.517] (II) AMD Proprietary Linux Driver Build Date: Feb 23 2014 21:38:54
[ 23.517] (++) using VT number 1
[ 23.517] (WW) Falling back to old probe method for fglrx
[ 23.587] (II) Loading PCS database from /etc/ati/amdpcsdb /etc/ati/amdpcsdb.default
[ 23.600] ukiDynamicMajor: found major device number 250
[ 23.600] ukiDynamicMajor: found major device number 250
[ 23.600] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 23.600] ukiOpenDevice: node name is /dev/ati/card0
[ 23.600] ukiOpenDevice: open result is 9, (OK)
[ 23.775] ukiOpenByBusid: ukiOpenMinor returns 9
[ 23.775] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 23.781] (--) Chipset Supported AMD Graphics Processor (0x68C1) found
[ 23.783] (WW) fglrx: No matching Device section for instance (BusID PCI:0@1:0:1) found
[ 23.784] (II) fglrx(0): pEnt->device->identifier=0x22351d0
[ 23.784] (II) fglrx(0): === [xdl_xs115_atiddxPreInit] === begin
[ 23.784] (II) Loading sub module "vgahw"
[ 23.784] (II) LoadModule: "vgahw"
[ 23.784] (II) Loading /usr/lib/xorg/modules/libvgahw.so
[ 23.797] (II) Module vgahw: vendor="X.Org Foundation"
[ 23.797] compiled for 1.15.0, module version = 0.1.0
[ 23.797] ABI class: X.Org Video Driver, version 15.0
[ 23.798] (**) fglrx(0): Depth 24, (--) framebuffer bpp 32
[ 23.798] (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 23.798] (==) fglrx(0): Default visual is TrueColor
[ 23.798] (**) fglrx(0): Option "DPMS" "true"
[ 23.798] (==) fglrx(0): RGB weight 888
[ 23.798] (II) fglrx(0): Using 8 bits per RGB
[ 23.798] (==) fglrx(0): Buffer Tiling is ON
[ 23.798] (II) Loading sub module "fglrxdrm"
[ 23.798] (II) LoadModule: "fglrxdrm"
[ 23.798] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[ 23.798] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
[ 23.798] compiled for 1.4.99.906, module version = 13.35.5
[ 23.801] ukiDynamicMajor: found major device number 250
[ 23.801] ukiDynamicMajor: found major device number 250
[ 23.801] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 23.801] ukiOpenDevice: node name is /dev/ati/card0
[ 23.801] ukiOpenDevice: open result is 11, (OK)
[ 23.801] ukiOpenByBusid: ukiOpenMinor returns 11
[ 23.801] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 23.801] (**) fglrx(0): NoAccel = NO
[ 23.802] (**) fglrx(0): AMD 2D Acceleration Architecture enabled
[ 23.802] (--) fglrx(0): Chipset: "AMD Mobility Radeon HD 5000 Series" (Chipset = 0x68c1)
[ 23.802] (--) fglrx(0): (PciSubVendor = 0x17aa, PciSubDevice = 0x3928)
[ 23.802] (==) fglrx(0): board vendor info: third party graphics adapter - NOT original AMD
[ 23.802] (--) fglrx(0): Linear framebuffer (phys) at 0xd0000000
[ 23.802] (--) fglrx(0): MMIO registers at 0xe8400000
[ 23.802] (--) fglrx(0): I/O port at 0x00002000
[ 23.802] (==) fglrx(0): ROM-BIOS at 0x000c0000
[ 23.805] (II) fglrx(0): AC Adapter is used
[ 23.820] (II) fglrx(0): Primary V_BIOS segment is: 0xc000
[ 23.821] (II) Loading sub module "vbe"
[ 23.821] (II) LoadModule: "vbe"
[ 23.821] (II) Loading /usr/lib/xorg/modules/libvbe.so
[ 23.822] (II) Module vbe: vendor="X.Org Foundation"
[ 23.822] compiled for 1.15.0, module version = 1.1.0
[ 23.822] ABI class: X.Org Video Driver, version 15.0
[ 23.834] (II) fglrx(0): VESA BIOS detected
[ 23.834] (II) fglrx(0): VESA VBE Version 3.0
[ 23.834] (II) fglrx(0): VESA VBE Total Mem: 16384 kB
[ 23.834] (II) fglrx(0): VESA VBE OEM: ATI ATOMBIOS
[ 23.834] (II) fglrx(0): VESA VBE OEM Software Rev: 12.20
[ 23.834] (II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2005, ATI Technologies Inc.
[ 23.834] (II) fglrx(0): VESA VBE OEM Product: MADISON
[ 23.834] (II) fglrx(0): VESA VBE OEM Product Rev: 01.00
[ 23.834] (II) fglrx(0): AMD Video BIOS revision 9 or later detected
[ 23.834] (--) fglrx(0): Video RAM: 1048576 kByte, Type: DDR3
[ 23.834] (II) fglrx(0): PCIE card detected
[ 23.834] (--) fglrx(0): Using per-process page tables (PPPT) as GART.
[ 23.834] (WW) fglrx(0): board is an unknown third party board, chipset is supported
[ 23.834] (II) fglrx(0): [FB] MC range(MCFBBase = 0xf00000000, MCFBSize = 0x40000000)
[ 23.834] (II) fglrx(0): RandR 1.2 support is enabled!
[ 23.834] (II) fglrx(0): RandR 1.2 rotation support is enabled!
[ 23.835] (II) Loading sub module "fb"
[ 23.835] (II) LoadModule: "fb"
[ 23.835] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 23.849] (II) Module fb: vendor="X.Org Foundation"
[ 23.849] compiled for 1.15.0, module version = 1.0.0
[ 23.849] ABI class: X.Org ANSI C Emulation, version 0.4
[ 23.849] (II) fglrx(0): EDID Management option: EDID Management is enabled
[ 23.849] (II) Loading sub module "ddc"
[ 23.849] (II) LoadModule: "ddc"
[ 23.849] (II) Module "ddc" already built-in
[ 24.033] (II) fglrx(0): Output LVDS using monitor section aticonfig-Monitor[0]-0
[ 24.034] (II) fglrx(0): Output DFP1 has no monitor section
[ 24.034] (II) fglrx(0): Output CRT1 has no monitor section
[ 24.034] (II) Loading sub module "ddc"
[ 24.034] (II) LoadModule: "ddc"
[ 24.034] (II) Module "ddc" already built-in
[ 24.034] (II) fglrx(0): Connected Display0: LVDS
[ 24.034] (II) fglrx(0): Display0 EDID data ---------------------------
[ 24.034] (II) fglrx(0): Manufacturer: SEC Model: 3049 Serial#: 1
[ 24.034] (II) fglrx(0): Year: 2009 Week: 0
[ 24.034] (II) fglrx(0): EDID Version: 1.3
[ 24.034] (II) fglrx(0): Digital Display Input
[ 24.034] (II) fglrx(0): Max Image Size [cm]: horiz.: 32 vert.: 19
[ 24.034] (II) fglrx(0): Gamma: 2.20
[ 24.034] (II) fglrx(0): DPMS capabilities: StandBy Suspend Off
[ 24.034] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 24.034] (II) fglrx(0): First detailed timing is preferred mode
[ 24.034] (II) fglrx(0): redX: 0.580 redY: 0.340 greenX: 0.310 greenY: 0.550
[ 24.034] (II) fglrx(0): blueX: 0.155 blueY: 0.135 whiteX: 0.313 whiteY: 0.329
[ 24.034] (II) fglrx(0): Manufacturer's mask: 0
[ 24.034] (II) fglrx(0): Supported detailed timing:
[ 24.034] (II) fglrx(0): clock: 75.1 MHz Image Size: 309 x 174 mm
[ 24.034] (II) fglrx(0): h_active: 1366 h_sync: 1414 h_sync_end 1446 h_blank_end 1572 h_border: 0
[ 24.034] (II) fglrx(0): v_active: 768 v_sync: 770 v_sync_end 775 v_blanking: 796 v_border: 0
[ 24.034] (II) fglrx(0): Supported detailed timing:
[ 24.034] (II) fglrx(0): clock: 50.0 MHz Image Size: 309 x 174 mm
[ 24.034] (II) fglrx(0): h_active: 1366 h_sync: 1414 h_sync_end 1446 h_blank_end 1572 h_border: 0
[ 24.034] (II) fglrx(0): v_active: 768 v_sync: 770 v_sync_end 775 v_blanking: 796 v_border: 0
[ 24.034] (II) fglrx(0): SAMSUNG
[ 24.034] (II) fglrx(0): 140AT11-L01
[ 24.034] (II) fglrx(0): EDID (in hex):
[ 24.034] (II) fglrx(0): 00ffffffffffff004ca3493001000000
[ 24.034] (II) fglrx(0): 0013010380201378ea87e594574f8c27
[ 24.034] (II) fglrx(0): 22505400000001010101010101010101
[ 24.034] (II) fglrx(0): 010101010101541d56ce50001c303020
[ 24.034] (II) fglrx(0): 250035ae100000198d1356ce50001c30
[ 24.034] (II) fglrx(0): 3020250035ae10000019000000fe0053
[ 24.034] (II) fglrx(0): 414d53554e470a2020202020000000fe
[ 24.034] (II) fglrx(0): 00313430415431312d4c30310a20005b
[ 24.034] (II) fglrx(0): End of Display0 EDID data --------------------
[ 24.034] (II) fglrx(0): Dynamic Surface Resizing Enabled
[ 24.035] (II) fglrx(0): EDID for output LVDS
[ 24.035] (II) fglrx(0): Manufacturer: SEC Model: 3049 Serial#: 1
[ 24.035] (II) fglrx(0): Year: 2009 Week: 0
[ 24.035] (II) fglrx(0): EDID Version: 1.3
[ 24.035] (II) fglrx(0): Digital Display Input
[ 24.035] (II) fglrx(0): Max Image Size [cm]: horiz.: 32 vert.: 19
[ 24.035] (II) fglrx(0): Gamma: 2.20
[ 24.035] (II) fglrx(0): DPMS capabilities: StandBy Suspend Off
[ 24.036] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 24.036] (II) fglrx(0): First detailed timing is preferred mode
[ 24.036] (II) fglrx(0): redX: 0.580 redY: 0.340 greenX: 0.310 greenY: 0.550
[ 24.036] (II) fglrx(0): blueX: 0.155 blueY: 0.135 whiteX: 0.313 whiteY: 0.329
[ 24.036] (II) fglrx(0): Manufacturer's mask: 0
[ 24.036] (II) fglrx(0): Supported detailed timing:
[ 24.036] (II) fglrx(0): clock: 75.1 MHz Image Size: 309 x 174 mm
[ 24.036] (II) fglrx(0): h_active: 1366 h_sync: 1414 h_sync_end 1446 h_blank_end 1572 h_border: 0
[ 24.036] (II) fglrx(0): v_active: 768 v_sync: 770 v_sync_end 775 v_blanking: 796 v_border: 0
[ 24.036] (II) fglrx(0): Supported detailed timing:
[ 24.036] (II) fglrx(0): clock: 50.0 MHz Image Size: 309 x 174 mm
[ 24.036] (II) fglrx(0): h_active: 1366 h_sync: 1414 h_sync_end 1446 h_blank_end 1572 h_border: 0
[ 24.036] (II) fglrx(0): v_active: 768 v_sync: 770 v_sync_end 775 v_blanking: 796 v_border: 0
[ 24.036] (II) fglrx(0): SAMSUNG
[ 24.036] (II) fglrx(0): 140AT11-L01
[ 24.036] (II) fglrx(0): EDID (in hex):
[ 24.036] (II) fglrx(0): 00ffffffffffff004ca3493001000000
[ 24.036] (II) fglrx(0): 0013010380201378ea87e594574f8c27
[ 24.036] (II) fglrx(0): 22505400000001010101010101010101
[ 24.036] (II) fglrx(0): 010101010101541d56ce50001c303020
[ 24.036] (II) fglrx(0): 250035ae100000198d1356ce50001c30
[ 24.036] (II) fglrx(0): 3020250035ae10000019000000fe0053
[ 24.036] (II) fglrx(0): 414d53554e470a2020202020000000fe
[ 24.036] (II) fglrx(0): 00313430415431312d4c30310a20005b
[ 24.036] (II) fglrx(0): EDID vendor "SEC", prod id 12361
[ 24.036] (II) fglrx(0): Printing DDC gathered Modelines:
[ 24.036] (II) fglrx(0): Modeline "1366x768"x0.0 75.08 1366 1414 1446 1572 768 770 775 796 -hsync -vsync (47.8 kHz eP)
[ 24.036] (II) fglrx(0): Modeline "1366x768"x0.0 50.05 1366 1414 1446 1572 768 770 775 796 -hsync -vsync (31.8 kHz e)
[ 24.036] (II) fglrx(0): Printing probed modes for output LVDS
[ 24.036] (II) fglrx(0): Modeline "1366x768"x60.0 75.08 1366 1414 1446 1572 768 770 775 796 -hsync -vsync (47.8 kHz eP)
[ 24.036] (II) fglrx(0): Modeline "1366x768"x40.0 50.05 1366 1414 1446 1572 768 770 775 796 -hsync -vsync (31.8 kHz e)
[ 24.036] (II) fglrx(0): Modeline "1360x768"x60.0 75.08 1360 1414 1446 1572 768 770 775 796 -hsync -vsync (47.8 kHz e)
[ 24.036] (II) fglrx(0): Modeline "1360x768"x40.0 50.05 1360 1414 1446 1572 768 770 775 796 -hsync -vsync (31.8 kHz e)
[ 24.036] (II) fglrx(0): Modeline "1280x768"x60.0 75.08 1280 1414 1446 1572 768 770 775 796 -hsync -vsync (47.8 kHz e)
[ 24.036] (II) fglrx(0): Modeline "1280x768"x40.0 50.05 1280 1414 1446 1572 768 770 775 796 -hsync -vsync (31.8 kHz e)
[ 24.036] (II) fglrx(0): Modeline "1280x720"x60.0 75.08 1280 1414 1446 1572 720 770 775 796 -hsync -vsync (47.8 kHz e)
[ 24.036] (II) fglrx(0): Modeline "1280x720"x40.0 50.05 1280 1414 1446 1572 720 770 775 796 -hsync -vsync (31.8 kHz e)
[ 24.036] (II) fglrx(0): Modeline "1024x768"x60.0 75.08 1024 1414 1446 1572 768 770 775 796 -hsync -vsync (47.8 kHz e)
[ 24.036] (II) fglrx(0): Modeline "1024x768"x40.0 50.05 1024 1414 1446 1572 768 770 775 796 -hsync -vsync (31.8 kHz e)
[ 24.037] (II) fglrx(0): Modeline "1024x600"x60.0 75.08 1024 1414 1446 1572 600 770 775 796 -hsync -vsync (47.8 kHz e)
[ 24.037] (II) fglrx(0): Modeline "1024x600"x40.0 50.05 1024 1414 1446 1572 600 770 775 796 -hsync -vsync (31.8 kHz e)
[ 24.037] (II) fglrx(0): Modeline "800x600"x60.0 75.08 800 1414 1446 1572 600 770 775 796 -hsync -vsync (47.8 kHz e)
[ 24.037] (II) fglrx(0): Modeline "800x600"x40.0 50.05 800 1414 1446 1572 600 770 775 796 -hsync -vsync (31.8 kHz e)
[ 24.037] (II) fglrx(0): Modeline "800x480"x60.0 75.08 800 1414 1446 1572 480 770 775 796 -hsync -vsync (47.8 kHz e)
[ 24.037] (II) fglrx(0): Modeline "800x480"x40.0 50.05 800 1414 1446 1572 480 770 775 796 -hsync -vsync (31.8 kHz e)
[ 24.037] (II) fglrx(0): Modeline "640x480"x60.0 75.08 640 1414 1446 1572 480 770 775 796 -hsync -vsync (47.8 kHz e)
[ 24.037] (II) fglrx(0): Modeline "640x480"x40.0 50.05 640 1414 1446 1572 480 770 775 796 -hsync -vsync (31.8 kHz e)
[ 24.037] (II) fglrx(0): EDID for output DFP1
[ 24.037] (II) fglrx(0): EDID for output CRT1
[ 24.037] (II) fglrx(0): Output LVDS connected
[ 24.037] (II) fglrx(0): Output DFP1 disconnected
[ 24.037] (II) fglrx(0): Output CRT1 disconnected
[ 24.037] (II) fglrx(0): Using exact sizes for initial modes
[ 24.037] (II) fglrx(0): Output LVDS using initial mode 1366x768
[ 24.037] (II) fglrx(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 24.037] (II) fglrx(0): Display dimensions: (320, 190) mm
[ 24.037] (II) fglrx(0): DPI set to (108, 102)
[ 24.037] (II) fglrx(0): Eyefinity capable adapter detected.
[ 24.037] (II) fglrx(0): Adapter AMD Mobility Radeon HD 5000 Series has 6 configurable heads and 1 displays connected.
[ 24.037] (==) fglrx(0): PseudoColor visuals disabled
[ 24.037] (II) Loading sub module "ramdac"
[ 24.037] (II) LoadModule: "ramdac"
[ 24.037] (II) Module "ramdac" already built-in
[ 24.037] (==) fglrx(0): NoDRI = NO
[ 24.037] (==) fglrx(0): Capabilities: 0x00000000
[ 24.037] (==) fglrx(0): CapabilitiesEx: 0x00000000
[ 24.037] (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
[ 24.037] (==) fglrx(0): UseFastTLS=0
[ 24.037] (II) fglrx(0): Desktop Vsync is enabled.
[ 24.037] (II) fglrx(0): Shadow Primary option: ShadowPrimary is enabled
[ 24.038] (--) Depth 24 pixmap format is 32 bpp
[ 24.038] Loading extension ATIFGLRXDRI
[ 24.038] (II) fglrx(0): doing swlDriScreenInit
[ 24.038] (II) fglrx(0): swlDriScreenInit for fglrx driver
[ 24.038] ukiDynamicMajor: found major device number 250
[ 24.038] ukiDynamicMajor: found major device number 250
[ 24.038] ukiDynamicMajor: found major device number 250
[ 24.038] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 24.038] ukiOpenDevice: node name is /dev/ati/card0
[ 24.038] ukiOpenDevice: open result is 12, (OK)
[ 24.038] ukiOpenByBusid: ukiOpenMinor returns 12
[ 24.038] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 24.038] (II) fglrx(0): [uki] DRM interface version 1.0
[ 24.038] (II) fglrx(0): [uki] created "fglrx" driver at busid "PCI:1:0:0"
[ 24.038] (II) fglrx(0): [uki] added 8192 byte SAREA at 0x2000
[ 24.038] (II) fglrx(0): [uki] mapped SAREA 0x2000 to 0x7f729bc73000
[ 24.038] (II) fglrx(0): [uki] framebuffer handle = 0x3000
[ 24.038] (II) fglrx(0): [uki] added 1 reserved context for kernel
[ 24.038] (II) fglrx(0): swlDriScreenInit done
[ 24.038] (II) fglrx(0): Kernel Module Version Information:
[ 24.039] (II) fglrx(0): Name: fglrx
[ 24.039] (II) fglrx(0): Version: 13.35.5
[ 24.039] (II) fglrx(0): Date: Feb 23 2014
[ 24.039] (II) fglrx(0): Desc: AMD FireGL DRM kernel module
[ 24.039] (II) fglrx(0): Kernel Module version matches driver.
[ 24.039] (II) fglrx(0): Kernel Module Build Time Information:
[ 24.039] (II) fglrx(0): Build-Kernel UTS_RELEASE: 3.13.6-1-ARCH
[ 24.039] (II) fglrx(0): Build-Kernel MODVERSIONS: yes
[ 24.039] (II) fglrx(0): Build-Kernel __SMP__: yes
[ 24.039] (II) fglrx(0): Build-Kernel PAGE_SIZE: 0x1000
[ 24.039] (II) fglrx(0): [uki] register handle = 0x00004000
[ 24.049] (II) fglrx(0): DRI initialization successfull
[ 24.077] (II) fglrx(0): FBADPhys: 0xf00000000 FBMappedSize: 0x01080000
[ 24.091] (==) fglrx(0): Backing store enabled
[ 24.091] Loading extension FGLRXEXTENSION
[ 24.091] (**) fglrx(0): DPMS enabled
[ 24.091] (II) fglrx(0): Initialized in-driver Xinerama extension
[ 24.091] (**) fglrx(0): Textured Video is enabled.
[ 24.091] (II) LoadModule: "glesx"
[ 24.091] (II) Loading /usr/lib/xorg/modules/glesx.so
[ 24.233] (II) Module glesx: vendor="X.Org Foundation"
[ 24.233] compiled for 1.4.99.906, module version = 1.0.0
[ 24.233] Loading extension GLESX
[ 24.233] (II) fglrx(0): GLESX enableFlags = 8784
[ 24.238] (II) fglrx(0): GLESX is enabled
[ 24.238] (II) LoadModule: "amdxmm"
[ 24.238] (II) Loading /usr/lib/xorg/modules/amdxmm.so
[ 24.249] (II) Module amdxmm: vendor="X.Org Foundation"
[ 24.249] compiled for 1.4.99.906, module version = 2.0.0
[ 24.262] Loading extension AMDXVOPL
[ 24.262] Loading extension AMDXVBA
[ 24.272] (II) fglrx(0): UVD feature is enabled(II) fglrx(0):
[ 24.277] (II) fglrx(0): Enable composite support successfully
[ 24.277] (WW) fglrx(0): Option "VendorName" is not used
[ 24.277] (WW) fglrx(0): Option "ModelName" is not used
[ 24.277] (II) fglrx(0): X context handle = 0x1
[ 24.277] (II) fglrx(0): [DRI] installation complete
[ 24.277] (==) fglrx(0): Silken mouse enabled
[ 24.291] (==) fglrx(0): Using HW cursor of display infrastructure!
[ 24.291] (II) fglrx(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 24.293] (II) fglrx(0): 'LVDS LCD' ConnectorType, abstracted as 'Panel'
[ 24.293] (II) fglrx(0): 'eDP LCD' ConnectorType, abstracted as 'Panel'
[ 25.265] (--) RandR disabled
[ 25.353] ukiDynamicMajor: found major device number 250
[ 25.353] ukiDynamicMajor: found major device number 250
[ 25.354] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 25.354] ukiOpenDevice: node name is /dev/ati/card0
[ 25.354] ukiOpenDevice: open result is 13, (OK)
[ 25.354] ukiOpenByBusid: ukiOpenMinor returns 13
[ 25.354] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 25.354] (EE) AIGLX error: failed to open /usr/X11R6/lib64/modules/dri/fglrx_dri.so, error[/usr/X11R6/lib64/modules/dri/fglrx_dri.so: cannot open shared object file: No such file or directory]
[ 25.727] ukiDynamicMajor: found major device number 250
[ 25.727] ukiDynamicMajor: found major device number 250
[ 25.727] ukiDynamicMajor: found major device number 250
[ 25.727] ukiOpenDevice: node name is /dev/ati/card0
[ 25.727] ukiOpenDevice: open result is 14, (OK)
[ 25.727] ukiGetBusid returned 'PCI:1:0:0'
[ 25.727] ukiOpenDevice: node name is /dev/ati/card1
[ 25.727] ukiOpenDevice: open result is -1, (No such device)
[ 25.727] ukiOpenDevice: open result is -1, (No such device)
[ 25.727] ukiOpenDevice: Open failed
[ 25.727] ukiOpenDevice: node name is /dev/ati/card2
[ 25.727] ukiOpenDevice: open result is -1, (No such device)
[ 25.727] ukiOpenDevice: open result is -1, (No such device)
[ 25.727] ukiOpenDevice: Open failed
[ 25.727] ukiOpenDevice: node name is /dev/ati/card3
[ 25.727] ukiOpenDevice: open result is -1, (No such device)
[ 25.727] ukiOpenDevice: open result is -1, (No such device)
[ 25.727] ukiOpenDevice: Open failed
[ 25.727] ukiOpenDevice: node name is /dev/ati/card4
[ 25.727] ukiOpenDevice: open result is -1, (No such device)
[ 25.727] ukiOpenDevice: open result is -1, (No such device)
[ 25.727] ukiOpenDevice: Open failed
[ 25.727] ukiOpenDevice: node name is /dev/ati/card5
[ 25.727] ukiOpenDevice: open result is -1, (No such device)
[ 25.727] ukiOpenDevice: open result is -1, (No such device)
[ 25.727] ukiOpenDevice: Open failed
[ 25.727] ukiOpenDevice: node name is /dev/ati/card6
[ 25.727] ukiOpenDevice: open result is -1, (No such device)
[ 25.727] ukiOpenDevice: open result is -1, (No such device)
[ 25.727] ukiOpenDevice: Open failed
[ 25.728] ukiOpenDevice: node name is /dev/ati/card7
[ 25.728] ukiOpenDevice: open result is -1, (No such device)
[ 25.728] ukiOpenDevice: open result is -1, (No such device)
[ 25.728] ukiOpenDevice: Open failed
[ 25.728] ukiOpenDevice: node name is /dev/ati/card8
[ 25.728] ukiOpenDevice: open result is -1, (No such device)
[ 25.728] ukiOpenDevice: open result is -1, (No such device)
[ 25.728] ukiOpenDevice: Open failed
[ 25.728] ukiOpenDevice: node name is /dev/ati/card9
[ 25.728] ukiOpenDevice: open result is -1, (No such device)
[ 25.728] ukiOpenDevice: open result is -1, (No such device)
[ 25.728] ukiOpenDevice: Open failed
[ 25.728] ukiOpenDevice: node name is /dev/ati/card10
[ 25.728] ukiOpenDevice: open result is -1, (No such device)
[ 25.728] ukiOpenDevice: open result is -1, (No such device)
[ 25.728] ukiOpenDevice: Open failed
[ 25.728] ukiOpenDevice: node name is /dev/ati/card11
[ 25.728] ukiOpenDevice: open result is -1, (No such device)
[ 25.728] ukiOpenDevice: open result is -1, (No such device)
[ 25.728] ukiOpenDevice: Open failed
[ 25.728] ukiOpenDevice: node name is /dev/ati/card12
[ 25.728] ukiOpenDevice: open result is -1, (No such device)
[ 25.728] ukiOpenDevice: open result is -1, (No such device)
[ 25.728] ukiOpenDevice: Open failed
[ 25.728] ukiOpenDevice: node name is /dev/ati/card13
[ 25.728] ukiOpenDevice: open result is -1, (No such device)
[ 25.728] ukiOpenDevice: open result is -1, (No such device)
[ 25.728] ukiOpenDevice: Open failed
[ 25.728] ukiOpenDevice: node name is /dev/ati/card14
[ 25.728] ukiOpenDevice: open result is -1, (No such device)
[ 25.728] ukiOpenDevice: open result is -1, (No such device)
[ 25.728] ukiOpenDevice: Open failed
[ 25.728] ukiOpenDevice: node name is /dev/ati/card15
[ 25.728] ukiOpenDevice: open result is -1, (No such device)
[ 25.728] ukiOpenDevice: open result is -1, (No such device)
[ 25.728] ukiOpenDevice: Open failed
[ 25.728] ukiDynamicMajor: found major device number 250
[ 25.728] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 25.728] ukiOpenDevice: node name is /dev/ati/card0
[ 25.728] ukiOpenDevice: open result is 14, (OK)
[ 25.728] ukiOpenByBusid: ukiOpenMinor returns 14
[ 25.728] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 26.548] (II) AIGLX: Loaded and initialized OpenGL driver(II) GLX: Initialized DRI GL provider for screen 0
[ 26.549] ukiDynamicMajor: found major device number 250
[ 26.549] ukiDynamicMajor: found major device number 250
[ 26.549] ukiDynamicMajor: found major device number 250
[ 26.549] ukiOpenDevice: node name is /dev/ati/card0
[ 26.549] ukiOpenDevice: open result is 15, (OK)
[ 26.549] ukiGetBusid returned 'PCI:1:0:0'
[ 26.549] ukiOpenDevice: node name is /dev/ati/card1
[ 26.549] ukiOpenDevice: open result is -1, (No such device)
[ 26.549] ukiOpenDevice: open result is -1, (No such device)
[ 26.549] ukiOpenDevice: Open failed
[ 26.549] ukiOpenDevice: node name is /dev/ati/card2
[ 26.549] ukiOpenDevice: open result is -1, (No such device)
[ 26.549] ukiOpenDevice: open result is -1, (No such device)
[ 26.549] ukiOpenDevice: Open failed
[ 26.549] ukiOpenDevice: node name is /dev/ati/card3
[ 26.549] ukiOpenDevice: open result is -1, (No such device)
[ 26.549] ukiOpenDevice: open result is -1, (No such device)
[ 26.549] ukiOpenDevice: Open failed
[ 26.549] ukiOpenDevice: node name is /dev/ati/card4
[ 26.549] ukiOpenDevice: open result is -1, (No such device)
[ 26.549] ukiOpenDevice: open result is -1, (No such device)
[ 26.549] ukiOpenDevice: Open failed
[ 26.549] ukiOpenDevice: node name is /dev/ati/card5
[ 26.549] ukiOpenDevice: open result is -1, (No such device)
[ 26.549] ukiOpenDevice: open result is -1, (No such device)
[ 26.549] ukiOpenDevice: Open failed
[ 26.549] ukiOpenDevice: node name is /dev/ati/card6
[ 26.549] ukiOpenDevice: open result is -1, (No such device)
[ 26.549] ukiOpenDevice: open result is -1, (No such device)
[ 26.549] ukiOpenDevice: Open failed
[ 26.549] ukiOpenDevice: node name is /dev/ati/card7
[ 26.549] ukiOpenDevice: open result is -1, (No such device)
[ 26.549] ukiOpenDevice: open result is -1, (No such device)
[ 26.549] ukiOpenDevice: Open failed
[ 26.549] ukiOpenDevice: node name is /dev/ati/card8
[ 26.549] ukiOpenDevice: open result is -1, (No such device)
[ 26.549] ukiOpenDevice: open result is -1, (No such device)
[ 26.549] ukiOpenDevice: Open failed
[ 26.549] ukiOpenDevice: node name is /dev/ati/card9
[ 26.549] ukiOpenDevice: open result is -1, (No such device)
[ 26.549] ukiOpenDevice: open result is -1, (No such device)
[ 26.549] ukiOpenDevice: Open failed
[ 26.549] ukiOpenDevice: node name is /dev/ati/card10
[ 26.549] ukiOpenDevice: open result is -1, (No such device)
[ 26.549] ukiOpenDevice: open result is -1, (No such device)
[ 26.549] ukiOpenDevice: Open failed
[ 26.549] ukiOpenDevice: node name is /dev/ati/card11
[ 26.549] ukiOpenDevice: open result is -1, (No such device)
[ 26.549] ukiOpenDevice: open result is -1, (No such device)
[ 26.549] ukiOpenDevice: Open failed
[ 26.549] ukiOpenDevice: node name is /dev/ati/card12
[ 26.550] ukiOpenDevice: open result is -1, (No such device)
[ 26.550] ukiOpenDevice: open result is -1, (No such device)
[ 26.550] ukiOpenDevice: Open failed
[ 26.550] ukiOpenDevice: node name is /dev/ati/card13
[ 26.550] ukiOpenDevice: open result is -1, (No such device)
[ 26.550] ukiOpenDevice: open result is -1, (No such device)
[ 26.550] ukiOpenDevice: Open failed
[ 26.550] ukiOpenDevice: node name is /dev/ati/card14
[ 26.550] ukiOpenDevice: open result is -1, (No such device)
[ 26.550] ukiOpenDevice: open result is -1, (No such device)
[ 26.550] ukiOpenDevice: Open failed
[ 26.550] ukiOpenDevice: node name is /dev/ati/card15
[ 26.550] ukiOpenDevice: open result is -1, (No such device)
[ 26.550] ukiOpenDevice: open result is -1, (No such device)
[ 26.550] ukiOpenDevice: Open failed
[ 26.550] ukiDynamicMajor: found major device number 250
[ 26.550] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 26.550] ukiOpenDevice: node name is /dev/ati/card0
[ 26.550] ukiOpenDevice: open result is 15, (OK)
[ 26.550] ukiOpenByBusid: ukiOpenMinor returns 15
[ 26.550] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 26.665] (II) fglrx(0): Desktop Vsync is enabled.
[ 26.665] (II) fglrx(0): TFD direct rotation is possible with 90/180/270 rotation
[ 26.665] (II) fglrx(0): Setting screen physical size to 361 x 203
[ 27.005] (II) config/udev: Adding input device Power Button (/dev/input/event5)
[ 27.006] (**) Power Button: Applying InputClass "system-keyboard"
[ 27.006] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 27.006] (II) LoadModule: "evdev"
[ 27.006] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 27.027] (II) Module evdev: vendor="X.Org Foundation"
[ 27.027] compiled for 1.15.0, module version = 2.8.2
[ 27.027] Module class: X.Org XInput Driver
[ 27.027] ABI class: X.Org XInput driver, version 20.0
[ 27.027] (II) Using input driver 'evdev' for 'Power Button'
[ 27.027] (**) Power Button: always reports core events
[ 27.027] (**) evdev: Power Button: Device: "/dev/input/event5"
[ 27.028] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 27.028] (--) evdev: Power Button: Found keys
[ 27.028] (II) evdev: Power Button: Configuring as keyboard
[ 27.028] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input9/event5"
[ 27.028] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 27.028] (**) Option "xkb_rules" "evdev"
[ 27.028] (**) Option "xkb_model" "pc104"
[ 27.028] (**) Option "xkb_layout" "us,cn"
[ 27.028] (**) Option "xkb_variant" ","
[ 27.081] (II) config/udev: Adding input device Video Bus (/dev/input/event6)
[ 27.081] (**) Video Bus: Applying InputClass "system-keyboard"
[ 27.081] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 27.081] (II) Using input driver 'evdev' for 'Video Bus'
[ 27.082] (**) Video Bus: always reports core events
[ 27.082] (**) evdev: Video Bus: Device: "/dev/input/event6"
[ 27.082] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 27.082] (--) evdev: Video Bus: Found keys
[ 27.082] (II) evdev: Video Bus: Configuring as keyboard
[ 27.082] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input10/event6"
[ 27.082] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 27.082] (**) Option "xkb_rules" "evdev"
[ 27.082] (**) Option "xkb_model" "pc104"
[ 27.082] (**) Option "xkb_layout" "us,cn"
[ 27.082] (**) Option "xkb_variant" ","
[ 27.083] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 27.083] (**) Power Button: Applying InputClass "system-keyboard"
[ 27.083] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 27.083] (II) Using input driver 'evdev' for 'Power Button'
[ 27.083] (**) Power Button: always reports core events
[ 27.083] (**) evdev: Power Button: Device: "/dev/input/event3"
[ 27.083] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 27.083] (--) evdev: Power Button: Found keys
[ 27.083] (II) evdev: Power Button: Configuring as keyboard
[ 27.083] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input7/event3"
[ 27.083] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 27.083] (**) Option "xkb_rules" "evdev"
[ 27.083] (**) Option "xkb_model" "pc104"
[ 27.083] (**) Option "xkb_layout" "us,cn"
[ 27.083] (**) Option "xkb_variant" ","
[ 27.084] (II) config/udev: Adding input device Lid Switch (/dev/input/event2)
[ 27.084] (II) No input driver specified, ignoring this device.
[ 27.084] (II) This device may have been added with another device file.
[ 27.084] (II) config/udev: Adding input device Sleep Button (/dev/input/event4)
[ 27.084] (**) Sleep Button: Applying InputClass "system-keyboard"
[ 27.084] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 27.084] (II) Using input driver 'evdev' for 'Sleep Button'
[ 27.084] (**) Sleep Button: always reports core events
[ 27.084] (**) evdev: Sleep Button: Device: "/dev/input/event4"
[ 27.084] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 27.084] (--) evdev: Sleep Button: Found keys
[ 27.084] (II) evdev: Sleep Button: Configuring as keyboard
[ 27.085] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input8/event4"
[ 27.085] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[ 27.085] (**) Option "xkb_rules" "evdev"
[ 27.085] (**) Option "xkb_model" "pc104"
[ 27.085] (**) Option "xkb_layout" "us,cn"
[ 27.085] (**) Option "xkb_variant" ","
[ 27.085] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=3 (/dev/input/event13)
[ 27.086] (II) No input driver specified, ignoring this device.
[ 27.086] (II) This device may have been added with another device file.
[ 27.086] (II) config/udev: Adding input device MLK RAPOO 1200 (/dev/input/event1)
[ 27.086] (**) MLK RAPOO 1200: Applying InputClass "system-keyboard"
[ 27.086] (**) MLK RAPOO 1200: Applying InputClass "evdev pointer catchall"
[ 27.086] (**) MLK RAPOO 1200: Applying InputClass "evdev keyboard catchall"
[ 27.086] (II) Using input driver 'evdev' for 'MLK RAPOO 1200'
[ 27.086] (**) MLK RAPOO 1200: always reports core events
[ 27.086] (**) evdev: MLK RAPOO 1200: Device: "/dev/input/event1"
[ 27.086] (--) evdev: MLK RAPOO 1200: Vendor 0x1bcf Product 0x501
[ 27.086] (--) evdev: MLK RAPOO 1200: Found 9 mouse buttons
[ 27.086] (--) evdev: MLK RAPOO 1200: Found scroll wheel(s)
[ 27.086] (--) evdev: MLK RAPOO 1200: Found relative axes
[ 27.086] (--) evdev: MLK RAPOO 1200: Found x and y relative axes
[ 27.086] (--) evdev: MLK RAPOO 1200: Found absolute axes
[ 27.086] (II) evdev: MLK RAPOO 1200: Forcing absolute x/y axes to exist.
[ 27.086] (--) evdev: MLK RAPOO 1200: Found keys
[ 27.086] (II) evdev: MLK RAPOO 1200: Configuring as mouse
[ 27.086] (II) evdev: MLK RAPOO 1200: Configuring as keyboard
[ 27.086] (II) evdev: MLK RAPOO 1200: Adding scrollwheel support
[ 27.086] (**) evdev: MLK RAPOO 1200: YAxisMapping: buttons 4 and 5
[ 27.086] (**) evdev: MLK RAPOO 1200: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 27.086] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input5/event1"
[ 27.086] (II) XINPUT: Adding extended input device "MLK RAPOO 1200" (type: KEYBOARD, id 10)
[ 27.086] (**) Option "xkb_rules" "evdev"
[ 27.086] (**) Option "xkb_model" "pc104"
[ 27.086] (**) Option "xkb_layout" "us,cn"
[ 27.087] (**) Option "xkb_variant" ","
[ 27.087] (II) evdev: MLK RAPOO 1200: initialized for relative axes.
[ 27.087] (WW) evdev: MLK RAPOO 1200: ignoring absolute axes.
[ 27.087] (**) MLK RAPOO 1200: (accel) keeping acceleration scheme 1
[ 27.087] (**) MLK RAPOO 1200: (accel) acceleration profile 0
[ 27.087] (**) MLK RAPOO 1200: (accel) acceleration factor: 2.000
[ 27.087] (**) MLK RAPOO 1200: (accel) acceleration threshold: 4
[ 27.087] (II) config/udev: Adding input device MLK RAPOO 1200 (/dev/input/mouse0)
[ 27.087] (**) MLK RAPOO 1200: Applying InputClass "system-keyboard"
[ 27.087] (II) No input driver specified, ignoring this device.
[ 27.087] (II) This device may have been added with another device file.
[ 27.087] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event8)
[ 27.087] (II) No input driver specified, ignoring this device.
[ 27.087] (II) This device may have been added with another device file.
[ 27.088] (II) config/udev: Adding input device HDA Intel MID Mic (/dev/input/event10)
[ 27.088] (II) No input driver specified, ignoring this device.
[ 27.088] (II) This device may have been added with another device file.
[ 27.088] (II) config/udev: Adding input device HDA Intel MID Headphone (/dev/input/event9)
[ 27.088] (II) No input driver specified, ignoring this device.
[ 27.088] (II) This device may have been added with another device file.
[ 27.088] (II) config/udev: Adding input device Lenovo EasyCamera (/dev/input/event11)
[ 27.088] (**) Lenovo EasyCamera: Applying InputClass "system-keyboard"
[ 27.088] (**) Lenovo EasyCamera: Applying InputClass "evdev keyboard catchall"
[ 27.088] (II) Using input driver 'evdev' for 'Lenovo EasyCamera'
[ 27.088] (**) Lenovo EasyCamera: always reports core events
[ 27.088] (**) evdev: Lenovo EasyCamera: Device: "/dev/input/event11"
[ 27.088] (--) evdev: Lenovo EasyCamera: Vendor 0x5986 Product 0x190
[ 27.088] (--) evdev: Lenovo EasyCamera: Found keys
[ 27.088] (II) evdev: Lenovo EasyCamera: Configuring as keyboard
[ 27.088] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.0/input/input18/event11"
[ 27.088] (II) XINPUT: Adding extended input device "Lenovo EasyCamera" (type: KEYBOARD, id 11)
[ 27.088] (**) Option "xkb_rules" "evdev"
[ 27.088] (**) Option "xkb_model" "pc104"
[ 27.088] (**) Option "xkb_layout" "us,cn"
[ 27.088] (**) Option "xkb_variant" ","
[ 27.089] (II) config/udev: Adding input device Ideapad extra buttons (/dev/input/event7)
[ 27.089] (**) Ideapad extra buttons: Applying InputClass "system-keyboard"
[ 27.089] (**) Ideapad extra buttons: Applying InputClass "evdev keyboard catchall"
[ 27.089] (II) Using input driver 'evdev' for 'Ideapad extra buttons'
[ 27.089] (**) Ideapad extra buttons: always reports core events
[ 27.089] (**) evdev: Ideapad extra buttons: Device: "/dev/input/event7"
[ 27.089] (--) evdev: Ideapad extra buttons: Vendor 0 Product 0
[ 27.089] (--) evdev: Ideapad extra buttons: Found keys
[ 27.089] (II) evdev: Ideapad extra buttons: Configuring as keyboard
[ 27.089] (**) Option "config_info" "udev:/sys/devices/platform/VPC2004:00/input/input11/event7"
[ 27.089] (II) XINPUT: Adding extended input device "Ideapad extra buttons" (type: KEYBOARD, id 12)
[ 27.089] (**) Option "xkb_rules" "evdev"
[ 27.089] (**) Option "xkb_model" "pc104"
[ 27.089] (**) Option "xkb_layout" "us,cn"
[ 27.089] (**) Option "xkb_variant" ","
[ 27.089] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 27.089] (**) AT Translated Set 2 keyboard: Applying InputClass "system-keyboard"
[ 27.089] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 27.089] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 27.089] (**) AT Translated Set 2 keyboard: always reports core events
[ 27.089] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 27.089] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 27.089] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 27.089] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 27.089] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 27.089] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 13)
[ 27.089] (**) Option "xkb_rules" "evdev"
[ 27.089] (**) Option "xkb_model" "pc104"
[ 27.089] (**) Option "xkb_layout" "us,cn"
[ 27.089] (**) Option "xkb_variant" ","
[ 27.090] (II) config/udev: Adding input device PS/2 Generic Mouse (/dev/input/event14)
[ 27.090] (**) PS/2 Generic Mouse: Applying InputClass "evdev pointer catchall"
[ 27.090] (II) Using input driver 'evdev' for 'PS/2 Generic Mouse'
[ 27.090] (**) PS/2 Generic Mouse: always reports core events
[ 27.090] (**) evdev: PS/2 Generic Mouse: Device: "/dev/input/event14"
[ 27.090] (--) evdev: PS/2 Generic Mouse: Vendor 0x2 Product 0x1
[ 27.090] (--) evdev: PS/2 Generic Mouse: Found 3 mouse buttons
[ 27.090] (--) evdev: PS/2 Generic Mouse: Found relative axes
[ 27.090] (--) evdev: PS/2 Generic Mouse: Found x and y relative axes
[ 27.090] (II) evdev: PS/2 Generic Mouse: Configuring as mouse
[ 27.090] (**) evdev: PS/2 Generic Mouse: YAxisMapping: buttons 4 and 5
[ 27.090] (**) evdev: PS/2 Generic Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 27.090] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio3/input/input17/event14"
[ 27.090] (II) XINPUT: Adding extended input device "PS/2 Generic Mouse" (type: MOUSE, id 14)
[ 27.090] (II) evdev: PS/2 Generic Mouse: initialized for relative axes.
[ 27.090] (**) PS/2 Generic Mouse: (accel) keeping acceleration scheme 1
[ 27.090] (**) PS/2 Generic Mouse: (accel) acceleration profile 0
[ 27.090] (**) PS/2 Generic Mouse: (accel) acceleration factor: 2.000
[ 27.090] (**) PS/2 Generic Mouse: (accel) acceleration threshold: 4
[ 27.090] (II) config/udev: Adding input device PS/2 Generic Mouse (/dev/input/mouse1)
[ 27.090] (II) No input driver specified, ignoring this device.
[ 27.090] (II) This device may have been added with another device file.
[ 27.091] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event15)
[ 27.091] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 27.091] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 27.091] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[ 27.091] (II) LoadModule: "synaptics"
[ 27.091] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 27.092] (II) Module synaptics: vendor="X.Org Foundation"
[ 27.092] compiled for 1.15.0, module version = 1.7.3
[ 27.092] Module class: X.Org XInput Driver
[ 27.092] ABI class: X.Org XInput driver, version 20.0
[ 27.092] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[ 27.092] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 27.092] (**) Option "Device" "/dev/input/event15"
[ 27.200] (II) synaptics: SynPS/2 Synaptics TouchPad: ignoring touch events for semi-multitouch device
[ 27.200] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5632 (res 62)
[ 27.200] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4554 (res 110)
[ 27.200] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 27.200] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[ 27.200] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
[ 27.200] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[ 27.200] (**) Option "TapButton1" "1"
[ 27.200] (**) Option "TapButton2" "2"
[ 27.200] (**) Option "TapButton3" "3"
[ 27.200] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 27.200] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 27.253] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio4/input/input21/event15"
[ 27.253] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 15)
[ 27.253] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 27.253] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75
[ 27.253] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.038
[ 27.253] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 27.253] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[ 27.253] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 27.253] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 27.253] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 27.254] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse2)
[ 27.254] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[ 27.254] (II) config/udev: Adding input device PC Speaker (/dev/input/event12)
[ 27.254] (II) No input driver specified, ignoring this device.
[ 27.254] (II) This device may have been added with another device file.
[ 27.262] (II) fglrx(0): Restoring Recent Mode via PCS is not supported in RANDR 1.2 capable environments
[ 34.734] (II) fglrx(0): EDID vendor "SEC", prod id 12361
[ 34.734] (II) fglrx(0): Printing DDC gathered Modelines:
[ 34.734] (II) fglrx(0): Modeline "1366x768"x0.0 75.08 1366 1414 1446 1572 768 770 775 796 -hsync -vsync (47.8 kHz eP)
[ 34.734] (II) fglrx(0): Modeline "1366x768"x0.0 50.05 1366 1414 1446 1572 768 770 775 796 -hsync -vsync (31.8 kHz e)Last edited by empter (2014-03-09 08:24:31)
Offline
#2 2014-03-09 06:42:48
- jumpily
- Member
- Registered: 2013-09-13
- Posts: 27
Re: [Solved]mesa upgrade then X unable to start
Same issue here. I downgraded to 10.0.3-1 and it is working again.
Offline
#3 2014-03-09 06:59:49
- Scimmia
- Fellow
- Registered: 2012-09-01
- Posts: 13,729
Re: [Solved]mesa upgrade then X unable to start
Talk to the package maintainer of your video drivers, the package needs updated/fixed.
Offline
#4 2014-03-09 08:23:22
- empter
- Member
- Registered: 2014-02-06
- Posts: 6
Re: [Solved]mesa upgrade then X unable to start
I solved it just
sudo ln -s /usr/lib/mesa-libEGL.so.1.0.0 /usr/lib/libEGL.so.1The new mesa 10.1.0 change the libEGL.so to mesa-libEGL.so but the package has't inlude the link-_-
Offline
#5 2014-03-09 16:02:50
- Scimmia
- Fellow
- Registered: 2012-09-01
- Posts: 13,729
Re: [Solved]mesa upgrade then X unable to start
Right, that is now the job of the mesa-libgl package or your binary driver package.
Offline