You are not logged in.
- Topics: Active | Unanswered
Pages: 1
#1 2014-03-25 03:37:51
- Skitter
- Member
- Registered: 2013-09-28
- Posts: 36
Can't start the X server
[EDIT] I'm sorry for posting this topic in the wrong place. I'm so tired, that I can barely press the keys. Please, can someone move it to Applications & Desktop Environments?[Edit]
After installing Arch on my external USB drive I can not start the x server (startx).
I didn't install Nvidia drivers.
After unloading i915 module (rmmod --force) the whole screen goes blank.
It looks like Arch is using Intel's VGA card instead of Nvidia's.
What can I do about it?
# dmesg |grep drm
[ 1.128060] [drm] Initialized drm 1.1.0 20060810
[ 1.135126] [drm] hdmi device not found 1 0 1
[ 2.735218] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 2.735219] [drm] No driver support for vblank timestamp query.
[ 2.823661] [drm] Initialized nouveau 1.1.1 20120801 for 0000:01:00.0 on minor 0
[ 10.405926] [drm] Memory usable by graphics device = 2048M
[ 10.461303] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 10.461304] [drm] Driver supports precise vblank timestamp query.
[ 10.488544] [drm] Wrong MCH_SSKPD value: 0x16040307
[ 10.488549] [drm] This can cause pipe underruns and display issues.
[ 10.488551] [drm] Please upgrade your BIOS to fix this.
[ 10.504175] fbcon: inteldrmfb (fb1) is primary device
[ 11.399470] i915 0000:00:02.0: fb1: inteldrmfb frame buffer device
[ 11.423859] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 1
[ 12.390325] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off# cat /var/log/Xorg.0.log
[ 22.256]
X.Org X Server 1.15.0
Release Date: 2013-12-27
[ 22.256] X Protocol Version 11, Revision 0
[ 22.256] Build Operating System: Linux 3.12.5-1-ARCH x86_64
[ 22.256] Current Operating System: Linux extworld 3.13.6-1-ARCH #1 SMP PREEMPT Fri Mar 7 22:47:48 CET 2014 x86_64
[ 22.256] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=/dev/disk/by-uuid/ec890a0f-3acb-422b-a380-27236d070fe0 rw splash init=/usr/lib/systemd/systemd
[ 22.256] Build Date: 09 January 2014 08:47:24AM
[ 22.256]
[ 22.256] Current version of pixman: 0.32.4
[ 22.257] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 22.257] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 22.257] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Mar 25 03:48:01 2014
[ 22.276] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 22.311] (==) No Layout section. Using the first Screen section.
[ 22.311] (==) No screen section available. Using defaults.
[ 22.311] (**) |-->Screen "Default Screen Section" (0)
[ 22.311] (**) | |-->Monitor "<default monitor>"
[ 22.326] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[ 22.326] (**) | |-->Device "Intel HD Graphics"
[ 22.326] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 22.326] (==) Automatically adding devices
[ 22.326] (==) Automatically enabling devices
[ 22.326] (==) Automatically adding GPU devices
[ 22.358] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 22.358] Entry deleted from font path.
[ 22.395] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 22.395] Entry deleted from font path.
[ 22.395] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 22.396] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 22.396] Entry deleted from font path.
[ 22.396] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 22.396] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/
[ 22.396] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 22.396] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 22.396] (II) Loader magic: 0x804c80
[ 22.396] (II) Module ABI versions:
[ 22.396] X.Org ANSI C Emulation: 0.4
[ 22.396] X.Org Video Driver: 15.0
[ 22.396] X.Org XInput driver : 20.0
[ 22.396] X.Org Server Extension : 8.0
[ 22.397] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 22.397] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 22.399] (--) PCI:*(0:0:2:0) 8086:0116:1043:1682 rev 9, Mem @ 0xdc400000/4194304, 0xb0000000/268435456, I/O @ 0x0000e000/64
[ 22.399] (--) PCI: (0:1:0:0) 10de:1051:1043:1762 rev 161, Mem @ 0xdb000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x0000d000/128, BIOS @ 0x????????/524288
[ 22.399] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 22.400] Initializing built-in extension Generic Event Extension
[ 22.400] Initializing built-in extension SHAPE
[ 22.400] Initializing built-in extension MIT-SHM
[ 22.400] Initializing built-in extension XInputExtension
[ 22.400] Initializing built-in extension XTEST
[ 22.400] Initializing built-in extension BIG-REQUESTS
[ 22.400] Initializing built-in extension SYNC
[ 22.400] Initializing built-in extension XKEYBOARD
[ 22.400] Initializing built-in extension XC-MISC
[ 22.400] Initializing built-in extension SECURITY
[ 22.400] Initializing built-in extension XINERAMA
[ 22.400] Initializing built-in extension XFIXES
[ 22.400] Initializing built-in extension RENDER
[ 22.400] Initializing built-in extension RANDR
[ 22.400] Initializing built-in extension COMPOSITE
[ 22.400] Initializing built-in extension DAMAGE
[ 22.400] Initializing built-in extension MIT-SCREEN-SAVER
[ 22.400] Initializing built-in extension DOUBLE-BUFFER
[ 22.400] Initializing built-in extension RECORD
[ 22.401] Initializing built-in extension DPMS
[ 22.401] Initializing built-in extension Present
[ 22.401] Initializing built-in extension DRI3
[ 22.402] Initializing built-in extension X-Resource
[ 22.403] Initializing built-in extension XVideo
[ 22.404] Initializing built-in extension XVideo-MotionCompensation
[ 22.405] Initializing built-in extension XFree86-VidModeExtension
[ 22.406] Initializing built-in extension XFree86-DGA
[ 22.407] Initializing built-in extension XFree86-DRI
[ 22.407] Initializing built-in extension DRI2
[ 22.407] (II) LoadModule: "glx"
[ 22.455] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 22.563] (II) Module glx: vendor="X.Org Foundation"
[ 22.563] compiled for 1.15.0, module version = 1.0.0
[ 22.563] ABI class: X.Org Server Extension, version 8.0
[ 22.563] (==) AIGLX enabled
[ 22.564] Loading extension GLX
[ 22.564] (II) LoadModule: "nouveau"
[ 22.564] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[ 22.592] (II) Module nouveau: vendor="X.Org Foundation"
[ 22.592] compiled for 1.15.0, module version = 1.0.10
[ 22.592] Module class: X.Org Video Driver
[ 22.592] ABI class: X.Org Video Driver, version 15.0
[ 22.592] (II) NOUVEAU driver
[ 22.592] (II) NOUVEAU driver for NVIDIA chipset families :
[ 22.592] RIVA TNT (NV04)
[ 22.592] RIVA TNT2 (NV05)
[ 22.592] GeForce 256 (NV10)
[ 22.592] GeForce 2 (NV11, NV15)
[ 22.592] GeForce 4MX (NV17, NV18)
[ 22.592] GeForce 3 (NV20)
[ 22.592] GeForce 4Ti (NV25, NV28)
[ 22.592] GeForce FX (NV3x)
[ 22.592] GeForce 6 (NV4x)
[ 22.592] GeForce 7 (G7x)
[ 22.592] GeForce 8 (G8x)
[ 22.592] GeForce GTX 200 (NVA0)
[ 22.592] GeForce GTX 400 (NVC0)
[ 22.592] (++) using VT number 1
[ 22.593] (II) [drm] nouveau interface version: 1.1.1
[ 22.593] (EE) No devices detected.
[ 22.593] (EE)
Fatal server error:
[ 22.593] (EE) no screens found(EE)
[ 22.593] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 22.593] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 22.593] (EE) # lspci -v
...
00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) (prog-if 00 [VGA controller])
Subsystem: ASUSTeK Computer Inc. Device 1682
Flags: bus master, fast devsel, latency 0, IRQ 49
Memory at dc400000 (64-bit, non-prefetchable) [size=4M]
Memory at b0000000 (64-bit, prefetchable) [size=256M]
I/O ports at e000 [size=64]
Expansion ROM at <unassigned> [disabled]
Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit-
Capabilities: [d0] Power Management version 2
Capabilities: [a4] PCI Advanced Features
Kernel driver in use: i915
Kernel modules: i915
...
01:00.0 VGA compatible controller: NVIDIA Corporation GF119M [GeForce GT 520MX] (rev a1) (prog-if 00 [VGA controller])
Subsystem: ASUSTeK Computer Inc. Device 1762
Flags: bus master, fast devsel, latency 0, IRQ 41
Memory at db000000 (32-bit, non-prefetchable) [size=16M]
Memory at c0000000 (64-bit, prefetchable) [size=256M]
Memory at d0000000 (64-bit, prefetchable) [size=32M]
I/O ports at d000 [size=128]
Expansion ROM at dc000000 [disabled] [size=512K]
Capabilities: [60] Power Management version 3
Capabilities: [68] MSI: Enable+ Count=1/1 Maskable- 64bit+
Capabilities: [78] Express Endpoint, MSI 00
Capabilities: [b4] Vendor Specific Information: Len=14 <?>
Capabilities: [100] Virtual Channel
Capabilities: [128] Power Budgeting <?>
Capabilities: [600] Vendor Specific Information: ID=0001 Rev=1 Len=024 <?>
Kernel driver in use: nouveau
Kernel modules: nouveau
...#ls /etc/X11/
twm
X11
xinit
xorg.conf.dBesides that I tried:
# Xorg -configure
# X -config xorg.conf.newBut my screen just went blank. I had to terminate the X server.
Here is the log after testing the generated configuration:
[ 630.266]
X.Org X Server 1.15.0
Release Date: 2013-12-27
[ 630.267] X Protocol Version 11, Revision 0
[ 630.267] Build Operating System: Linux 3.12.5-1-ARCH x86_64
[ 630.267] Current Operating System: Linux extworld 3.13.6-1-ARCH #1 SMP PREEMPT Fri Mar 7 22:47:48 CET 2014 x86_64
[ 630.267] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=/dev/disk/by-uuid/ec890a0f-3acb-422b-a380-27236d070fe0 rw splash init=/usr/lib/systemd/systemd
[ 630.267] Build Date: 09 January 2014 08:47:24AM
[ 630.267]
[ 630.267] Current version of pixman: 0.32.4
[ 630.267] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 630.267] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 630.267] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Mar 25 04:31:30 2014
[ 630.267] (==) Using config file: "/etc/X11/xorg.conf"
[ 630.267] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 630.267] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 630.267] (==) ServerLayout "X.org Configured"
[ 630.267] (**) |-->Screen "Screen0" (0)
[ 630.267] (**) | |-->Monitor "Monitor0"
[ 630.267] (**) | |-->Device "Card0"
[ 630.267] (**) |-->Screen "Screen1" (1)
[ 630.267] (**) | |-->Monitor "Monitor1"
[ 630.267] (**) | |-->Device "Card1"
[ 630.267] (**) |-->Input Device "Mouse0"
[ 630.267] (**) |-->Input Device "Keyboard0"
[ 630.267] (==) Automatically adding devices
[ 630.267] (==) Automatically enabling devices
[ 630.267] (==) Automatically adding GPU devices
[ 630.268] (**) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/,
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 630.268] (**) ModulePath set to "/usr/lib/xorg/modules"
[ 630.268] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 630.268] (WW) Disabling Mouse0
[ 630.268] (WW) Disabling Keyboard0
[ 630.268] (II) Loader magic: 0x804c80
[ 630.268] (II) Module ABI versions:
[ 630.268] X.Org ANSI C Emulation: 0.4
[ 630.268] X.Org Video Driver: 15.0
[ 630.268] X.Org XInput driver : 20.0
[ 630.268] X.Org Server Extension : 8.0
[ 630.268] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 630.268] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 630.270] (--) PCI:*(0:0:2:0) 8086:0116:1043:1682 rev 9, Mem @ 0xdc400000/4194304, 0xb0000000/268435456, I/O @ 0x0000e000/64
[ 630.270] (--) PCI: (0:1:0:0) 10de:1051:1043:1762 rev 161, Mem @ 0xdb000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x0000d000/128, BIOS @ 0x????????/524288
[ 630.270] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 630.270] Initializing built-in extension Generic Event Extension
[ 630.270] Initializing built-in extension SHAPE
[ 630.270] Initializing built-in extension MIT-SHM
[ 630.270] Initializing built-in extension XInputExtension
[ 630.270] Initializing built-in extension XTEST
[ 630.270] Initializing built-in extension BIG-REQUESTS
[ 630.270] Initializing built-in extension SYNC
[ 630.270] Initializing built-in extension XKEYBOARD
[ 630.270] Initializing built-in extension XC-MISC
[ 630.270] Initializing built-in extension SECURITY
[ 630.270] Initializing built-in extension XINERAMA
[ 630.270] Initializing built-in extension XFIXES
[ 630.270] Initializing built-in extension RENDER
[ 630.270] Initializing built-in extension RANDR
[ 630.270] Initializing built-in extension COMPOSITE
[ 630.270] Initializing built-in extension DAMAGE
[ 630.270] Initializing built-in extension MIT-SCREEN-SAVER
[ 630.270] Initializing built-in extension DOUBLE-BUFFER
[ 630.270] Initializing built-in extension RECORD
[ 630.270] Initializing built-in extension DPMS
[ 630.270] Initializing built-in extension Present
[ 630.270] Initializing built-in extension DRI3
[ 630.270] Initializing built-in extension X-Resource
[ 630.270] Initializing built-in extension XVideo
[ 630.270] Initializing built-in extension XVideo-MotionCompensation
[ 630.270] Initializing built-in extension XFree86-VidModeExtension
[ 630.270] Initializing built-in extension XFree86-DGA
[ 630.270] Initializing built-in extension XFree86-DRI
[ 630.270] Initializing built-in extension DRI2
[ 630.270] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
[ 630.270] (II) LoadModule: "glx"
[ 630.270] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 630.271] (II) Module glx: vendor="X.Org Foundation"
[ 630.271] compiled for 1.15.0, module version = 1.0.0
[ 630.271] ABI class: X.Org Server Extension, version 8.0
[ 630.271] (==) AIGLX enabled
[ 630.271] Loading extension GLX
[ 630.271] (II) LoadModule: "nouveau"
[ 630.271] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[ 630.271] (II) Module nouveau: vendor="X.Org Foundation"
[ 630.271] compiled for 1.15.0, module version = 1.0.10
[ 630.271] Module class: X.Org Video Driver
[ 630.272] ABI class: X.Org Video Driver, version 15.0
[ 630.272] (II) LoadModule: "intel"
[ 630.272] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 630.272] (II) Module intel: vendor="X.Org Foundation"
[ 630.272] compiled for 1.15.0, module version = 2.99.911
[ 630.272] Module class: X.Org Video Driver
[ 630.272] ABI class: X.Org Video Driver, version 15.0
[ 630.272] (II) NOUVEAU driver
[ 630.272] (II) NOUVEAU driver for NVIDIA chipset families :
[ 630.272] RIVA TNT (NV04)
[ 630.272] RIVA TNT2 (NV05)
[ 630.272] GeForce 256 (NV10)
[ 630.272] GeForce 2 (NV11, NV15)
[ 630.272] GeForce 4MX (NV17, NV18)
[ 630.272] GeForce 3 (NV20)
[ 630.272] GeForce 4Ti (NV25, NV28)
[ 630.272] GeForce FX (NV3x)
[ 630.272] GeForce 6 (NV4x)
[ 630.272] GeForce 7 (G7x)
[ 630.272] GeForce 8 (G8x)
[ 630.272] GeForce GTX 200 (NVA0)
[ 630.272] GeForce GTX 400 (NVC0)
[ 630.273] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[ 630.273] (II) intel: Driver for Intel(R) HD Graphics: 2000-5000
[ 630.273] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100
[ 630.273] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200
[ 630.273] (++) using VT number 1
[ 630.273] (II) [drm] nouveau interface version: 1.1.1
[ 630.274] (II) Loading sub module "dri2"
[ 630.274] (II) LoadModule: "dri2"
[ 630.274] (II) Module "dri2" already built-in
[ 630.274] (--) NOUVEAU(0): Chipset: "NVIDIA NVD9"
[ 630.274] (==) NOUVEAU(0): Depth 24, (--) framebuffer bpp 32
[ 630.274] (==) NOUVEAU(0): RGB weight 888
[ 630.274] (==) NOUVEAU(0): Default visual is TrueColor
[ 630.274] (==) NOUVEAU(0): Using HW cursor
[ 630.274] (==) NOUVEAU(0): GLX sync to VBlank disabled.
[ 630.274] (==) NOUVEAU(0): Page flipping enabled
[ 630.274] (==) NOUVEAU(0): Swap limit set to 2 [Max allowed 2]
[ 630.297] (II) NOUVEAU(0): Output VGA-1 using monitor section Monitor0
[ 630.331] (II) NOUVEAU(0): EDID for output VGA-1
[ 630.331] (II) NOUVEAU(0): Printing probed modes for output VGA-1
[ 630.331] (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 630.331] (II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 630.331] (II) NOUVEAU(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 630.331] (II) NOUVEAU(0): Modeline "848x480"x60.0 33.75 848 864 976 1088 480 486 494 517 +hsync +vsync (31.0 kHz e)
[ 630.331] (II) NOUVEAU(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 489 492 525 -hsync -vsync (31.5 kHz e)
[ 630.331] (II) NOUVEAU(0): Output VGA-1 connected
[ 630.331] (II) NOUVEAU(0): Using exact sizes for initial modes
[ 630.331] (II) NOUVEAU(0): Output VGA-1 using initial mode 1024x768
[ 630.331] (II) NOUVEAU(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 630.331] (--) NOUVEAU(0): Virtual size is 1024x768 (pitch 0)
[ 630.331] (**) NOUVEAU(0): Driver mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
[ 630.331] (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 630.331] (**) NOUVEAU(0): Driver mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.3 Hz
[ 630.331] (II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 630.331] (**) NOUVEAU(0): Driver mode "800x600": 36.0 MHz (scaled from 0.0 MHz), 35.2 kHz, 56.2 Hz
[ 630.331] (II) NOUVEAU(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 630.331] (**) NOUVEAU(0): Driver mode "848x480": 33.8 MHz (scaled from 0.0 MHz), 31.0 kHz, 60.0 Hz
[ 630.331] (II) NOUVEAU(0): Modeline "848x480"x60.0 33.75 848 864 976 1088 480 486 494 517 +hsync +vsync (31.0 kHz e)
[ 630.331] (**) NOUVEAU(0): Driver mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 59.9 Hz
[ 630.331] (II) NOUVEAU(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 489 492 525 -hsync -vsync (31.5 kHz e)
[ 630.331] (==) NOUVEAU(0): DPI set to (96, 96)
[ 630.331] (II) Loading sub module "fb"
[ 630.331] (II) LoadModule: "fb"
[ 630.331] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 630.332] (II) Module fb: vendor="X.Org Foundation"
[ 630.332] compiled for 1.15.0, module version = 1.0.0
[ 630.332] ABI class: X.Org ANSI C Emulation, version 0.4
[ 630.332] (II) Loading sub module "exa"
[ 630.332] (II) LoadModule: "exa"
[ 630.332] (II) Loading /usr/lib/xorg/modules/libexa.so
[ 630.332] (II) Module exa: vendor="X.Org Foundation"
[ 630.332] compiled for 1.15.0, module version = 2.6.0
[ 630.332] ABI class: X.Org Video Driver, version 15.0
[ 630.332] (II) Loading sub module "shadowfb"
[ 630.332] (II) LoadModule: "shadowfb"
[ 630.332] (II) Loading /usr/lib/xorg/modules/libshadowfb.so
[ 630.332] (II) Module shadowfb: vendor="X.Org Foundation"
[ 630.332] compiled for 1.15.0, module version = 1.0.0
[ 630.332] ABI class: X.Org ANSI C Emulation, version 0.4
[ 630.333] (--) intel(1): Integrated Graphics Chipset: Intel(R) HD Graphics 3000
[ 630.333] (--) intel(1): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx
[ 630.333] (==) intel(1): Depth 24, (--) framebuffer bpp 32
[ 630.333] (==) intel(1): RGB weight 888
[ 630.333] (==) intel(1): Default visual is TrueColor
[ 630.333] (**) intel(1): Framebuffer tiled
[ 630.333] (**) intel(1): Pixmaps tiled
[ 630.333] (**) intel(1): "Tear free" disabled
[ 630.333] (**) intel(1): Forcing per-crtc-pixmaps? no
[ 630.334] (II) intel(1): Output LVDS1 using monitor section Monitor1
[ 630.334] (--) intel(1): Found backlight control interface acpi_video1 (type 'firmware') for output LVDS1
[ 630.334] (II) intel(1): Output VGA2 has no monitor section
[ 630.334] (II) intel(1): Output HDMI1 has no monitor section
[ 630.334] (II) intel(1): Output DP1 has no monitor section
[ 630.334] (II) intel(1): Output VIRTUAL1 has no monitor section
[ 630.334] (--) intel(1): Output LVDS1 using initial mode 1366x768 on pipe 0
[ 630.334] (==) intel(1): DPI set to (96, 96)
[ 630.334] (II) Loading sub module "dri2"
[ 630.334] (II) LoadModule: "dri2"
[ 630.334] (II) Module "dri2" already built-in
[ 630.334] (--) Depth 24 pixmap format is 32 bpp
[ 630.336] (II) NOUVEAU(0): Opened GPU channel 0
[ 630.339] (II) NOUVEAU(0): [DRI2] Setup complete
[ 630.339] (II) NOUVEAU(0): [DRI2] DRI driver: nouveau
[ 630.339] (II) NOUVEAU(0): [DRI2] VDPAU driver: nouveau
[ 630.339] (II) EXA(0): Driver allocated offscreen pixmaps
[ 630.339] (II) EXA(0): Driver registered support for the following operations:
[ 630.339] (II) Solid
[ 630.339] (II) Copy
[ 630.339] (II) Composite (RENDER acceleration)
[ 630.339] (II) UploadToScreen
[ 630.339] (II) DownloadFromScreen
[ 630.339] (==) NOUVEAU(0): Backing store enabled
[ 630.339] (==) NOUVEAU(0): Silken mouse enabled
[ 630.339] (II) NOUVEAU(0): [XvMC] Associated with Nouveau GeForce 8/9 Textured Video.
[ 630.339] (II) NOUVEAU(0): [XvMC] Extension initialized.
[ 630.339] (==) NOUVEAU(0): DPMS enabled
[ 630.339] (II) NOUVEAU(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 630.340] (--) RandR disabled
[ 630.340] (II) intel(1): SNA initialized with Sandybridge (gen6, gt2) backend
[ 630.340] (==) intel(1): Backing store enabled
[ 630.340] (==) intel(1): Silken mouse enabled
[ 630.340] (II) intel(1): HW Cursor enabled
[ 630.340] (II) intel(1): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 630.340] (==) intel(1): DPMS enabled
[ 630.340] (II) intel(1): [DRI2] Setup complete
[ 630.340] (II) intel(1): [DRI2] DRI driver: i965
[ 630.340] (II) intel(1): [DRI2] VDPAU driver: i965
[ 630.340] (II) intel(1): direct rendering: DRI2 Enabled
[ 630.340] (==) intel(1): hotplug detection: "enabled"
[ 630.340] (--) RandR disabled
[ 630.381] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 630.381] (II) AIGLX: enabled GLX_ARB_create_context
[ 630.381] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 630.381] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 630.381] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 630.381] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 630.381] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[ 630.381] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[ 630.381] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 630.382] (II) AIGLX: Loaded and initialized nouveau
[ 630.382] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 630.385] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 630.385] (II) AIGLX: enabled GLX_ARB_create_context
[ 630.385] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 630.385] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 630.385] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 630.385] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 630.385] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[ 630.385] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[ 630.385] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 630.385] (II) AIGLX: Loaded and initialized i965
[ 630.385] (II) GLX: Initialized DRI2 GL provider for screen 1
[ 630.388] (II) NOUVEAU(0): NVEnterVT is called.
[ 630.414] (II) NOUVEAU(0): Setting screen physical size to 270 x 203
[ 630.414] resize called 1024 768
[ 630.416] (II) intel(1): switch to mode 1366x768@60.0 on LVDS1 using pipe 0, position (0, 0), rotation normal, reflection none
[ 630.423] (II) intel(1): Setting screen physical size to 361 x 203
[ 630.572] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 630.572] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 630.572] (II) LoadModule: "evdev"
[ 630.572] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 630.572] (II) Module evdev: vendor="X.Org Foundation"
[ 630.572] compiled for 1.15.0, module version = 2.8.2
[ 630.572] Module class: X.Org XInput Driver
[ 630.572] ABI class: X.Org XInput driver, version 20.0
[ 630.572] (II) Using input driver 'evdev' for 'Power Button'
[ 630.572] (**) Power Button: always reports core events
[ 630.572] (**) evdev: Power Button: Device: "/dev/input/event2"
[ 630.572] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 630.572] (--) evdev: Power Button: Found keys
[ 630.573] (II) evdev: Power Button: Configuring as keyboard
[ 630.573] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[ 630.573] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 630.573] (**) Option "xkb_rules" "evdev"
[ 630.573] (**) Option "xkb_model" "pc104"
[ 630.573] (**) Option "xkb_layout" "us"
[ 630.595] (II) config/udev: Adding input device Video Bus (/dev/input/event12)
[ 630.595] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 630.595] (II) Using input driver 'evdev' for 'Video Bus'
[ 630.595] (**) Video Bus: always reports core events
[ 630.595] (**) evdev: Video Bus: Device: "/dev/input/event12"
[ 630.595] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 630.595] (--) evdev: Video Bus: Found keys
[ 630.595] (II) evdev: Video Bus: Configuring as keyboard
[ 630.595] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input19/event12"
[ 630.595] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 630.595] (**) Option "xkb_rules" "evdev"
[ 630.595] (**) Option "xkb_model" "pc104"
[ 630.595] (**) Option "xkb_layout" "us"
[ 630.595] (II) config/udev: Adding input device Video Bus (/dev/input/event11)
[ 630.595] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 630.595] (II) Using input driver 'evdev' for 'Video Bus'
[ 630.595] (**) Video Bus: always reports core events
[ 630.595] (**) evdev: Video Bus: Device: "/dev/input/event11"
[ 630.595] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 630.595] (--) evdev: Video Bus: Found keys
[ 630.595] (II) evdev: Video Bus: Configuring as keyboard
[ 630.595] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:4d/LNXVIDEO:00/input/input18/event11"
[ 630.595] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[ 630.595] (**) Option "xkb_rules" "evdev"
[ 630.595] (**) Option "xkb_model" "pc104"
[ 630.595] (**) Option "xkb_layout" "us"
[ 630.596] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
[ 630.596] (II) No input driver specified, ignoring this device.
[ 630.596] (II) This device may have been added with another device file.
[ 630.596] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
[ 630.596] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 630.596] (II) Using input driver 'evdev' for 'Sleep Button'
[ 630.596] (**) Sleep Button: always reports core events
[ 630.596] (**) evdev: Sleep Button: Device: "/dev/input/event1"
[ 630.596] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 630.596] (--) evdev: Sleep Button: Found keys
[ 630.596] (II) evdev: Sleep Button: Configuring as keyboard
[ 630.596] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1/event1"
[ 630.596] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[ 630.596] (**) Option "xkb_rules" "evdev"
[ 630.596] (**) Option "xkb_model" "pc104"
[ 630.596] (**) Option "xkb_layout" "us"
[ 630.596] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 630.597] (II) config/udev: Adding drm device (/dev/dri/card1)
[ 630.597] (II) config/udev: Adding input device ASUS USB2.0 WebCam (/dev/input/event8)
[ 630.597] (**) ASUS USB2.0 WebCam: Applying InputClass "evdev keyboard catchall"
[ 630.597] (II) Using input driver 'evdev' for 'ASUS USB2.0 WebCam'
[ 630.597] (**) ASUS USB2.0 WebCam: always reports core events
[ 630.597] (**) evdev: ASUS USB2.0 WebCam: Device: "/dev/input/event8"
[ 630.597] (--) evdev: ASUS USB2.0 WebCam: Vendor 0x58f Product 0xa014
[ 630.597] (--) evdev: ASUS USB2.0 WebCam: Found keys
[ 630.597] (II) evdev: ASUS USB2.0 WebCam: Configuring as keyboard
[ 630.597] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input16/event8"
[ 630.597] (II) XINPUT: Adding extended input device "ASUS USB2.0 WebCam" (type: KEYBOARD, id 10)
[ 630.597] (**) Option "xkb_rules" "evdev"
[ 630.597] (**) Option "xkb_model" "pc104"
[ 630.597] (**) Option "xkb_layout" "us"
[ 630.597] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event4)
[ 630.597] (II) No input driver specified, ignoring this device.
[ 630.597] (II) This device may have been added with another device file.
[ 630.598] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event6)
[ 630.598] (II) No input driver specified, ignoring this device.
[ 630.598] (II) This device may have been added with another device file.
[ 630.598] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event5)
[ 630.598] (II) No input driver specified, ignoring this device.
[ 630.598] (II) This device may have been added with another device file.
[ 630.598] (II) config/udev: Adding input device Asus WMI hotkeys (/dev/input/event9)
[ 630.598] (**) Asus WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[ 630.598] (II) Using input driver 'evdev' for 'Asus WMI hotkeys'
[ 630.598] (**) Asus WMI hotkeys: always reports core events
[ 630.598] (**) evdev: Asus WMI hotkeys: Device: "/dev/input/event9"
[ 630.598] (--) evdev: Asus WMI hotkeys: Vendor 0 Product 0
[ 630.598] (--) evdev: Asus WMI hotkeys: Found keys
[ 630.598] (II) evdev: Asus WMI hotkeys: Configuring as keyboard
[ 630.598] (**) Option "config_info" "udev:/sys/devices/platform/asus-nb-wmi/input/input17/event9"
[ 630.598] (II) XINPUT: Adding extended input device "Asus WMI hotkeys" (type: KEYBOARD, id 11)
[ 630.598] (**) Option "xkb_rules" "evdev"
[ 630.598] (**) Option "xkb_model" "pc104"
[ 630.598] (**) Option "xkb_layout" "us"
[ 630.599] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event3)
[ 630.599] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 630.599] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 630.599] (**) AT Translated Set 2 keyboard: always reports core events
[ 630.599] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event3"
[ 630.599] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 630.599] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 630.599] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 630.599] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input3/event3"
[ 630.599] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 12)
[ 630.599] (**) Option "xkb_rules" "evdev"
[ 630.599] (**) Option "xkb_model" "pc104"
[ 630.599] (**) Option "xkb_layout" "us"
[ 630.599] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event10)
[ 630.599] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 630.599] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 630.599] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[ 630.599] (II) LoadModule: "synaptics"
[ 630.599] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 630.599] (II) Module synaptics: vendor="X.Org Foundation"
[ 630.599] compiled for 1.15.0, module version = 1.7.4
[ 630.599] Module class: X.Org XInput Driver
[ 630.599] ABI class: X.Org XInput driver, version 20.0
[ 630.599] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[ 630.599] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 630.599] (**) Option "Device" "/dev/input/event10"
[ 630.703] (II) synaptics: SynPS/2 Synaptics TouchPad: ignoring touch events for semi-multitouch device
[ 630.703] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5762 (res 52)
[ 630.703] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4902 (res 83)
[ 630.703] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 630.703] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[ 630.703] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
[ 630.703] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[ 630.703] (**) Option "TapButton1" "1"
[ 630.703] (**) Option "TapButton2" "2"
[ 630.703] (**) Option "TapButton3" "3"
[ 630.703] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 630.703] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 630.756] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio4/input/input15/event10"
[ 630.756] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 13)
[ 630.756] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 630.756] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75
[ 630.756] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.036
[ 630.757] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 630.757] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[ 630.757] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 630.757] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 630.757] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 630.757] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[ 630.757] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[ 630.757] (II) config/udev: Adding input device PC Speaker (/dev/input/event7)
[ 630.757] (II) No input driver specified, ignoring this device.
[ 630.757] (II) This device may have been added with another device file.
[ 631.711] resize called 1024 768
[ 637.597] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 637.597] (II) NOUVEAU(0): NVLeaveVT is called.
[ 637.597] (II) AIGLX: Suspending AIGLX clients for VT switchAnd here you can see the generated config:
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
Screen 1 "Screen1" RightOf "Screen0"
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc/"
FontPath "/usr/share/fonts/TTF/"
FontPath "/usr/share/fonts/OTF/"
FontPath "/usr/share/fonts/Type1/"
FontPath "/usr/share/fonts/100dpi/"
FontPath "/usr/share/fonts/75dpi/"
EndSection
Section "Module"
Load "glx"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection
Section "Monitor"
Identifier "Monitor1"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz",
### <percent>: "<f>%"
### [arg]: arg optional
#Option "SWcursor" # [<bool>]
#Option "HWcursor" # [<bool>]
#Option "NoAccel" # [<bool>]
#Option "ShadowFB" # [<bool>]
#Option "VideoKey" # <i>
#Option "WrappedFB" # [<bool>]
#Option "GLXVBlank" # [<bool>]
#Option "ZaphodHeads" # <str>
#Option "PageFlip" # [<bool>]
#Option "SwapLimit" # <i>
#Option "AsyncUTSDFS" # [<bool>]
Identifier "Card0"
Driver "nouveau"
BusID "PCI:1:0:0"
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz",
### <percent>: "<f>%"
### [arg]: arg optional
#Option "NoAccel" # [<bool>]
#Option "AccelMethod" # <str>
#Option "Backlight" # <str>
#Option "DRI" # <str>
#Option "ColorKey" # <i>
#Option "VideoKey" # <i>
#Option "Tiling" # [<bool>]
#Option "LinearFramebuffer" # [<bool>]
#Option "VSync" # [<bool>]
#Option "PageFlip" # [<bool>]
#Option "SwapbuffersWait" # [<bool>]
#Option "TripleBuffer" # [<bool>]
#Option "XvPreferOverlay" # [<bool>]
#Option "HotPlug" # [<bool>]
#Option "ReprobeOutputs" # [<bool>]
#Option "XvMC" # [<bool>]
#Option "ZaphodHeads" # <str>
#Option "VirtualHeads" # <i>
#Option "TearFree" # [<bool>]
#Option "PerCrtcPixmaps" # [<bool>]
#Option "FallbackDebug" # [<bool>]
#Option "DebugFlushBatches" # [<bool>]
#Option "DebugFlushCaches" # [<bool>]
#Option "DebugWait" # [<bool>]
#Option "BufferCache" # [<bool>]
Identifier "Card1"
Driver "intel"
BusID "PCI:0:2:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Section "Screen"
Identifier "Screen1"
Device "Card1"
Monitor "Monitor1"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSectionLast edited by Skitter (2014-03-25 05:37:37)
Offline
#2 2014-03-25 11:01:48
- clfarron4
- Member
- From: London, UK
- Registered: 2013-06-28
- Posts: 2,165
- Website
Re: Can't start the X server
So you have nVidia's Hybrid Graphics system, also known fondly as nVidia Optimus. These links should get you started:
https://wiki.archlinux.org/index.php/NVIDIA
https://wiki.archlinux.org/index.php/NVIDIA_Optimus
Claire is fine.
Problems? I have dysgraphia, so clear and concise please.
My public GPG key for package signing
My x86_64 package repository
Offline
#3 2014-03-25 13:12:18
- Skitter
- Member
- Registered: 2013-09-28
- Posts: 36
Re: Can't start the X server
clfarron4 wrote:
So you have nVidia's Hybrid Graphics system, also known fondly as nVidia Optimus. These links should get you started:
https://wiki.archlinux.org/index.php/NVIDIA
https://wiki.archlinux.org/index.php/NVIDIA_Optimus
The point is that I don't want to install Nvidia drivers. It should be a mobile system, that's why I need Nouveau.
I want it to work with ATI's, Intel's and Nvidia's graphic cards,
The funny thing is that I've already done it before - I've successfully installed Arch on USB with Nouveau drivers, so I know that it is possible.
Offline
#4 2014-03-25 13:25:13
- clfarron4
- Member
- From: London, UK
- Registered: 2013-06-28
- Posts: 2,165
- Website
Re: Can't start the X server
Hmm... Ok. If I'm not mistaken, if you have an nVidia Optimus system with Arch, it WILL use the Intel card unless you manage to get something like PRIME working.
Claire is fine.
Problems? I have dysgraphia, so clear and concise please.
My public GPG key for package signing
My x86_64 package repository
Offline
Pages: 1