You are not logged in.
Pages: 1
Hello, just installed arch on hp probook 4530s but i can't fix the fan speed. It seems that it runs at 100% because i can hear noise. Before the system is booted the fan is quiet and when it boots the fan runs faster and it stays noisy. I was trying to do sensors detect, but it seems like the fans are not detected when i finish with the detection because when i run "sensors" i get only this
acpitz-virtual-0
Adapter: Virtual device
temp1: +65.0°C (crit = +128.0°C)
temp2: +47.0°C (crit = +128.0°C)
temp3: +42.0°C (crit = +128.0°C)
temp4: +52.0°C (crit = +128.0°C)
temp5: +26.0°C (crit = +128.0°C)
temp6: +0.0°C (crit = +128.0°C)
temp7: +0.0°C (crit = +128.0°C)
temp8: +0.0°C (crit = +128.0°C)
coretemp-isa-0000
Adapter: ISA adapter
Physical id 0: +62.0°C (high = +86.0°C, crit = +100.0°C)
Core 0: +58.0°C (high = +86.0°C, crit = +100.0°C)
Core 1: +62.0°C (high = +86.0°C, crit = +100.0°C)
Not sure what i should do to fix it. Thanks for any help!
Offline
I do have issues with sensors too.
In fact, we do have a similar sensors detected :
acpitz-virtual-0 and coretemp-isa
I read many howtos and posts on many forums, seems many have issues with this acpitz-virtual thingy.
What pwmconfig tells ?
In my case : There are no pwm-capable sensor modules installed
Lenovo Thinkpad x230 i5-3320M 2.6GHz 250GB SSD (M4) 16GB
SSD | SeaBIOS | GPT | BTRFS | OpenRC | Xfce4 | Zsh | Tmux | Spacemacs
* "Aware Newbie" *
Ibus IM for language script support (e.g. 日本語 - 中文)
Offline
Pages: 1