Arch Linux

4p1C

Member

From: France

Registered: 2011-01-31

Posts: 58

Dell 6430u and dock displaylink D3000

Hi all,
Since few days, I have some problems with my docking station.
First one is that, slim is very long to launch the desktop when I'm connected to the dock but starts normally when I'm off the dock. This problem is just annoying, I can manage with it by improving my composure.
The second one is more crucial because the keyboard and mouse work for few second and seem to be deconnected after.
You will find below journalctl logs related (as for me) to the problem :

Apr 09 09:52:26 mdeeph136 kernel: usb 1-2: new high-speed USB device number 30 using xhci_hcd
Apr 09 09:52:26 mdeeph136 kernel: hub 1-2:1.0: USB hub found
Apr 09 09:52:26 mdeeph136 kernel: hub 1-2:1.0: 4 ports detected
Apr 09 09:52:26 mdeeph136 kernel: hub 1-2:1.0: hub_port_status failed (err = -71)
Apr 09 09:52:26 mdeeph136 kernel: hub 1-2:1.0: cannot reset port 3 (err = -71)
Apr 09 09:52:26 mdeeph136 kernel: hub 1-2:1.0: cannot reset port 3 (err = -71)
Apr 09 09:52:26 mdeeph136 kernel: hub 1-2:1.0: cannot reset port 3 (err = -71)
Apr 09 09:52:26 mdeeph136 kernel: hub 1-2:1.0: cannot reset port 3 (err = -71)
Apr 09 09:52:26 mdeeph136 kernel: hub 1-2:1.0: Cannot enable port 3.  Maybe the USB cable is bad?
Apr 09 09:52:26 mdeeph136 kernel: xhci_hcd 0000:00:14.0: URB transfer length is wrong, xHC issue? req. len = 0, act. len = 4294967288
Apr 09 09:52:26 mdeeph136 kernel: hub 1-2:1.0: cannot reset port 3 (err = -71)
Apr 09 09:52:26 mdeeph136 kernel: hub 1-2:1.0: cannot reset port 3 (err = -71)
Apr 09 09:52:26 mdeeph136 kernel: hub 1-2:1.0: cannot reset port 3 (err = -71)
Apr 09 09:52:26 mdeeph136 kernel: hub 1-2:1.0: cannot reset port 3 (err = -71)
Apr 09 09:52:26 mdeeph136 kernel: hub 1-2:1.0: cannot reset port 3 (err = -71)
Apr 09 09:52:26 mdeeph136 kernel: hub 1-2:1.0: Cannot enable port 3.  Maybe the USB cable is bad?
Apr 09 09:52:26 mdeeph136 kernel: hub 1-2:1.0: cannot disable port 3 (err = -71)
Apr 09 09:52:26 mdeeph136 kernel: hub 1-2:1.0: cannot reset port 3 (err = -71)
Apr 09 09:52:26 mdeeph136 kernel: hub 1-2:1.0: cannot reset port 3 (err = -71)
Apr 09 09:52:26 mdeeph136 kernel: hub 1-2:1.0: cannot reset port 3 (err = -71)
Apr 09 09:52:26 mdeeph136 kernel: hub 1-2:1.0: cannot reset port 3 (err = -71)
Apr 09 09:52:26 mdeeph136 kernel: hub 1-2:1.0: cannot reset port 3 (err = -71)
Apr 09 09:52:26 mdeeph136 kernel: hub 1-2:1.0: Cannot enable port 3.  Maybe the USB cable is bad?
Apr 09 09:52:26 mdeeph136 kernel: hub 1-2:1.0: cannot disable port 3 (err = -71)
Apr 09 09:52:26 mdeeph136 kernel: hub 1-2:1.0: cannot reset port 3 (err = -71)
Apr 09 09:52:26 mdeeph136 kernel: hub 1-2:1.0: cannot reset port 3 (err = -71)
Apr 09 09:52:26 mdeeph136 kernel: hub 1-2:1.0: cannot reset port 3 (err = -71)
Apr 09 09:52:26 mdeeph136 kernel: hub 1-2:1.0: cannot reset port 3 (err = -71)
Apr 09 09:52:26 mdeeph136 kernel: hub 1-2:1.0: cannot reset port 3 (err = -71)
Apr 09 09:52:26 mdeeph136 kernel: hub 1-2:1.0: Cannot enable port 3.  Maybe the USB cable is bad?
Apr 09 09:52:26 mdeeph136 kernel: hub 1-2:1.0: cannot disable port 3 (err = -71)
Apr 09 09:52:26 mdeeph136 kernel: hub 1-2:1.0: unable to enumerate USB device on port 3
Apr 09 09:52:26 mdeeph136 kernel: hub 1-2:1.0: cannot disable port 3 (err = -71)
Apr 09 09:52:26 mdeeph136 kernel: usb 1-2: USB disconnect, device number 30
Apr 09 09:52:26 mdeeph136 kernel: hub 1-2:1.0: hub_port_status failed (err = -71)
Apr 09 09:52:26 mdeeph136 kernel: hub 1-2:1.0: activate --> -19
Apr 09 09:52:29 mdeeph136 kernel: usb 1-3.4.3: new high-speed USB device number 35 using xhci_hcd
Apr 09 09:52:29 mdeeph136 kernel: hub 1-3.4.3:1.0: USB hub found
Apr 09 09:52:29 mdeeph136 kernel: hub 1-3.4.3:1.0: 4 ports detected
Apr 09 09:52:30 mdeeph136 kernel: usb 1-3.4.3.3: new low-speed USB device number 36 using xhci_hcd
Apr 09 09:52:30 mdeeph136 kernel: usb 1-3.4.3.3: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
Apr 09 09:52:30 mdeeph136 kernel: usb 1-3.4.3.3: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
Apr 09 09:52:30 mdeeph136 kernel: input: HID 0b38:0010 as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3.4/1-3.4.3/1-3.4.3.3/1-3.4.3.3:1.0/input/input32
Apr 09 09:52:30 mdeeph136 kernel: hid-generic 0003:0B38:0010.0012: input,hidraw1: USB HID v1.10 Keyboard [HID 0b38:0010] on usb-0000:00:14.0-3.4.3.3/input0
Apr 09 09:52:30 mdeeph136 kernel: input: HID 0b38:0010 as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3.4/1-3.4.3/1-3.4.3.3/1-3.4.3.3:1.1/input/input33
Apr 09 09:52:30 mdeeph136 kernel: hid-generic 0003:0B38:0010.0013: input,hidraw2: USB HID v1.10 Device [HID 0b38:0010] on usb-0000:00:14.0-3.4.3.3/input1
Apr 09 09:54:07 mdeeph136 kernel: fuse init (API version 7.22)
Apr 09 09:54:55 mdeeph136 kernel: cannot get ctl value: req = 0x81, wValue = 0x101, wIndex = 0xb02, type = 1
Apr 09 09:55:11 mdeeph136 kernel: cannot get ctl value: req = 0x81, wValue = 0x101, wIndex = 0xb02, type = 1

Any help is welcome.
Cheers

alex.forencich

Member

Registered: 2011-05-29

Posts: 96

Re: Dell 6430u and dock displaylink D3000

I just got the same dock myself, and I am seeing the same issue when it is connected to a USB 3 port.  It seems to work perfectly on USB 2.

Last edited by alex.forencich (2014-06-06 01:32:34)