You are not logged in.

Pages: 1

#1 2014-04-27 18:10:08

lucacerone
Member
From: Spain
Registered: 2012-05-04
Posts: 144
Website

Wireless not working when resuming laptop from suspension

Dear all,
I managed to configure my laptop to suspend and hibernate following the guide in the wiki https://wiki.archlinux.org/index.php/Su … _Hibernate
(I use the systemd interface).

Everything seems to work, but when I resume my laptop from suspension the wireless doesn't work (it hangs while attempting to connect to my network)
and I have to restart the laptop.
Curiously this only happens if I keep the laptop suspended for a few time (e.g. an hour), but if I suspend it for let's say a couple of minutes everything
seems to work.

Can you guide me to diagnosing the issue and fix it?
Thanks a lot for the help!

Offline

#2 2014-04-28 08:54:27

Rexilion
Member
Registered: 2013-12-23
Posts: 784

Re: Wireless not working when resuming laptop from suspension

Did you try rmmodding and the modprobing it's driver?

Also:

post a dmesg of a working resume
post a dmesg of a failing resume

Last edited by Rexilion (2014-04-28 08:54:49)

fs/super.c : "Self-destruct in 5 seconds.  Have a nice day...\n",

Offline

#3 2014-04-28 09:04:34

lucacerone
Member
From: Spain
Registered: 2012-05-04
Posts: 144
Website

Re: Wireless not working when resuming laptop from suspension

Thanks Rexilion,
I will try to reproduce the issue and sen the results of dmesg to the forum.

About rmmodding modprobing I have no ideas what these are (will try to google for it tonight)

Offline

#4 2014-04-28 09:08:58

Rexilion
Member
Registered: 2013-12-23
Posts: 784

Re: Wireless not working when resuming laptop from suspension

rmmod and modprobe are two commands to detach a driver and to (re)attach a driver. It's a bit of a rough procedure (stuff could hang). But it could help sometimes.

fs/super.c : "Self-destruct in 5 seconds.  Have a nice day...\n",

Offline

#5 2014-05-03 08:26:55

lucacerone
Member
From: Spain
Registered: 2012-05-04
Posts: 144
Website

Re: Wireless not working when resuming laptop from suspension

Hi guys,
sorry for the delay, but it took me sometim to replicate the issue.
Following you can find the output of dmesg when wifi at resume doesn not work
(I am no expert but it seems to me that the last lines are the one involving the wifi and a timed out connection)

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.14.1-1-ARCH (nobody@var-lib-archbuild-testing-x86_64-tobias) (gcc version 4.8.2 20140206 (prerelease) (GCC) ) #1 SMP PREEMPT Mon Apr 14 20:40:47 CEST 2014
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=cf34604a-cf9c-46c4-9917-c5b1eb90e313 rw resume=/dev/disk/by-uuid/232de61d-c508-4454-aa7f-c61338fe4e5e
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000020200000-0x0000000040003fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000040004000-0x0000000040004fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000040005000-0x00000000b9be4fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000b9be5000-0x00000000ba074fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ba075000-0x00000000ba086fff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000ba087000-0x00000000ba192fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000ba193000-0x00000000ba8abfff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ba8ac000-0x00000000ba8acfff] usable
[    0.000000] BIOS-e820: [mem 0x00000000ba8ad000-0x00000000ba8effff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000ba8f0000-0x00000000bacfafff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bacfb000-0x00000000baff3fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000baff4000-0x00000000baffffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bb800000-0x00000000bf9fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000023f5fffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: SAMSUNG ELECTRONICS CO., LTD. 350V5C/351V5C/3540VC/3440VC/350V5, BIOS P08ABE 02/23/2013
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] No AGP bridge found
[    0.000000] e820: last_pfn = 0x23f600 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-CFFFF write-protect
[    0.000000]   D0000-E7FFF uncachable
[    0.000000]   E8000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask E00000000 write-back
[    0.000000]   1 base 200000000 mask FC0000000 write-back
[    0.000000]   2 base 0C0000000 mask FC0000000 uncachable
[    0.000000]   3 base 0BC000000 mask FFC000000 uncachable
[    0.000000]   4 base 0BB800000 mask FFF800000 uncachable
[    0.000000]   5 base 23F800000 mask FFF800000 uncachable
[    0.000000]   6 base 23F600000 mask FFFE00000 uncachable
[    0.000000]   7 disabled
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] e820: update [mem 0xbb800000-0xffffffff] usable ==> reserved
[    0.000000] e820: last_pfn = 0xbb000 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000fd740-0x000fd74f] mapped at [ffff8800000fd740]
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] BRK [0x01b28000, 0x01b28fff] PGTABLE
[    0.000000] BRK [0x01b29000, 0x01b29fff] PGTABLE
[    0.000000] BRK [0x01b2a000, 0x01b2afff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x23f400000-0x23f5fffff]
[    0.000000]  [mem 0x23f400000-0x23f5fffff] page 2M
[    0.000000] BRK [0x01b2b000, 0x01b2bfff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x23c000000-0x23f3fffff]
[    0.000000]  [mem 0x23c000000-0x23f3fffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x200000000-0x23bffffff]
[    0.000000]  [mem 0x200000000-0x23bffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0x1fffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x20200000-0x40003fff]
[    0.000000]  [mem 0x20200000-0x3fffffff] page 2M
[    0.000000]  [mem 0x40000000-0x40003fff] page 4k
[    0.000000] BRK [0x01b2c000, 0x01b2cfff] PGTABLE
[    0.000000] BRK [0x01b2d000, 0x01b2dfff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x40005000-0xb9be4fff]
[    0.000000]  [mem 0x40005000-0x401fffff] page 4k
[    0.000000]  [mem 0x40200000-0xb99fffff] page 2M
[    0.000000]  [mem 0xb9a00000-0xb9be4fff] page 4k
[    0.000000] init_memory_mapping: [mem 0xba8ac000-0xba8acfff]
[    0.000000]  [mem 0xba8ac000-0xba8acfff] page 4k
[    0.000000] init_memory_mapping: [mem 0xba8f0000-0xbacfafff]
[    0.000000]  [mem 0xba8f0000-0xba9fffff] page 4k
[    0.000000]  [mem 0xbaa00000-0xbabfffff] page 2M
[    0.000000]  [mem 0xbac00000-0xbacfafff] page 4k
[    0.000000] init_memory_mapping: [mem 0xbaff4000-0xbaffffff]
[    0.000000]  [mem 0xbaff4000-0xbaffffff] page 4k
[    0.000000] init_memory_mapping: [mem 0x100000000-0x1ffffffff]
[    0.000000]  [mem 0x100000000-0x1ffffffff] page 2M
[    0.000000] RAMDISK: [mem 0x379e0000-0x37ce7fff]
[    0.000000] ACPI: RSDP 00000000000f0490 000024 (v02 SECCSD)
[    0.000000] ACPI: XSDT 00000000ba079080 00007C (v01 SECCSD LH43STAR 01072009 AMI  00010013)
[    0.000000] ACPI: FACP 00000000ba084b00 00010C (v05 SECCSD LH43STAR 01072009 AMI  00010013)
[    0.000000] ACPI: DSDT 00000000ba079188 00B976 (v02 SECCSD LH43STAR 00000022 INTL 20051117)
[    0.000000] ACPI: FACS 00000000ba190080 000040
[    0.000000] ACPI: APIC 00000000ba084c10 000072 (v03 SECCSD LH43STAR 01072009 AMI  00010013)
[    0.000000] ACPI: FPDT 00000000ba084c88 000044 (v01 SECCSD LH43STAR 01072009 AMI  00010013)
[    0.000000] ACPI: MCFG 00000000ba084cd0 00003C (v01 SECCSD LH43STAR 01072009 MSFT 00000097)
[    0.000000] ACPI: MSDM 00000000ba084d10 000055 (v03 SECCSD LH43STAR 01072009 AMI  00010013)
[    0.000000] ACPI: SSDT 00000000ba084d68 0006E9 (v01 TrmRef PtidDevc 00001000 INTL 20091112)
[    0.000000] ACPI: HPET 00000000ba085458 000038 (v01 SECCSD LH43STAR 01072009 AMI. 00000005)
[    0.000000] ACPI: SSDT 00000000ba085490 0002BD (v01 SataRe SataTabl 00001000 INTL 20091112)
[    0.000000] ACPI: SSDT 00000000ba085750 000968 (v01  PmRef  Cpu0Ist 00003000 INTL 20051117)
[    0.000000] ACPI: SSDT 00000000ba0860b8 000A92 (v01  PmRef    CpuPm 00003000 INTL 20051117)
[    0.000000] ACPI: SLIC 00000000ba086b50 000176 (v01 SECCSD LH43STAR 01072009 AMI  00010013)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000023f5fffff]
[    0.000000] Initmem setup node 0 [mem 0x00000000-0x23f5fffff]
[    0.000000]   NODE_DATA [mem 0x23f5f2000-0x23f5f6fff]
[    0.000000]  [ffffea0000000000-ffffea0008ffffff] PMD -> [ffff880236c00000-ffff88023ebfffff] on node 0
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
[    0.000000]   Normal   [mem 0x100000000-0x23f5fffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x0009cfff]
[    0.000000]   node   0: [mem 0x00100000-0x1fffffff]
[    0.000000]   node   0: [mem 0x20200000-0x40003fff]
[    0.000000]   node   0: [mem 0x40005000-0xb9be4fff]
[    0.000000]   node   0: [mem 0xba8ac000-0xba8acfff]
[    0.000000]   node   0: [mem 0xba8f0000-0xbacfafff]
[    0.000000]   node   0: [mem 0xbaff4000-0xbaffffff]
[    0.000000]   node   0: [mem 0x100000000-0x23f5fffff]
[    0.000000] On node 0 totalpages: 2069400
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3996 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 11832 pages used for memmap
[    0.000000]   DMA32 zone: 757244 pages, LIFO batch:31
[    0.000000]   Normal zone: 20440 pages used for memmap
[    0.000000]   Normal zone: 1308160 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x40004000-0x40004fff]
[    0.000000] PM: Registered nosave memory: [mem 0xb9be5000-0xba074fff]
[    0.000000] PM: Registered nosave memory: [mem 0xba075000-0xba086fff]
[    0.000000] PM: Registered nosave memory: [mem 0xba087000-0xba192fff]
[    0.000000] PM: Registered nosave memory: [mem 0xba193000-0xba8abfff]
[    0.000000] PM: Registered nosave memory: [mem 0xba8ad000-0xba8effff]
[    0.000000] PM: Registered nosave memory: [mem 0xbacfb000-0xbaff3fff]
[    0.000000] PM: Registered nosave memory: [mem 0xbb000000-0xbb7fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xbb800000-0xbf9fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xbfa00000-0xf7ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[    0.000000] e820: [mem 0xbfa00000-0xf7ffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] PERCPU: Embedded 28 pages/cpu @ffff88023f200000 s86016 r8192 d20480 u524288
[    0.000000] pcpu-alloc: s86016 r8192 d20480 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 2037043
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=cf34604a-cf9c-46c4-9917-c5b1eb90e313 rw resume=/dev/disk/by-uuid/232de61d-c508-4454-aa7f-c61338fe4e5e
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 8065084K/8277600K available (5020K kernel code, 802K rwdata, 1612K rodata, 1112K init, 1284K bss, 212516K reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] 	Dump stacks of tasks blocking RCU-preempt GP.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS:8448 nr_irqs:712 16
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] allocated 33554432 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 2494.169 MHz processor
[    0.000033] Calibrating delay loop (skipped), value calculated using timer frequency.. 4990.18 BogoMIPS (lpj=8313896)
[    0.000035] pid_max: default: 32768 minimum: 301
[    0.000041] ACPI: Core revision 20131218
[    0.006618] ACPI: All ACPI Tables successfully acquired
[    0.009657] Security Framework initialized
[    0.009662] Yama: becoming mindful.
[    0.010134] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.012103] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.012974] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.012984] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.013154] Initializing cgroup subsys memory
[    0.013158] Initializing cgroup subsys devices
[    0.013159] Initializing cgroup subsys freezer
[    0.013161] Initializing cgroup subsys net_cls
[    0.013162] Initializing cgroup subsys blkio
[    0.013184] CPU: Physical Processor ID: 0
[    0.013185] CPU: Processor Core ID: 0
[    0.013189] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.013565] mce: CPU supports 7 MCE banks
[    0.013575] CPU0: Thermal monitoring enabled (TM1)
[    0.013584] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
tlb_flushall_shift: 2
[    0.013679] Freeing SMP alternatives memory: 20K (ffffffff819e0000 - ffffffff819e5000)
[    0.014615] ftrace: allocating 19978 entries in 79 pages
[    0.024023] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.057063] smpboot: CPU0: Intel(R) Core(TM) i5-3210M CPU @ 2.50GHz (fam: 06, model: 3a, stepping: 09)
[    0.057070] TSC deadline timer enabled
[    0.057078] Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, full-width counters, Intel PMU driver.
[    0.057084] ... version:                3
[    0.057085] ... bit width:              48
[    0.057086] ... generic registers:      4
[    0.057086] ... value mask:             0000ffffffffffff
[    0.057087] ... max period:             0000ffffffffffff
[    0.057088] ... fixed-purpose events:   3
[    0.057089] ... event mask:             000000070000000f
[    0.083861] x86: Booting SMP configuration:
[    0.083863] .... node  #0, CPUs:      #1
[    0.097555] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.104250]  #2 #3
[    0.138194] x86: Booted up 1 node, 4 CPUs
[    0.138197] smpboot: Total of 4 processors activated (19961.74 BogoMIPS)
[    0.141323] devtmpfs: initialized
[    0.144000] PM: Registering ACPI NVS region [mem 0xba087000-0xba192fff] (1097728 bytes)
[    0.144015] PM: Registering ACPI NVS region [mem 0xba8ad000-0xba8effff] (274432 bytes)
[    0.144753] pinctrl core: initialized pinctrl subsystem
[    0.144787] RTC time: 19:44:08, date: 05/02/14
[    0.144817] NET: Registered protocol family 16
[    0.144888] cpuidle: using governor ladder
[    0.144890] cpuidle: using governor menu
[    0.144900] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.144902] ACPI: bus type PCI registered
[    0.144903] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.144954] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.144956] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[    0.151767] PCI: Using configuration type 1 for base access
[    0.152376] bio: create slab <bio-0> at 0
[    0.152448] ACPI: Added _OSI(Module Device)
[    0.152449] ACPI: Added _OSI(Processor Device)
[    0.152450] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.152451] ACPI: Added _OSI(Processor Aggregator Device)
[    0.155356] ACPI: Executed 1 blocks of module-level executable AML code
[    0.159233] ACPI: SSDT 00000000ba022018 00083B (v01  PmRef  Cpu0Cst 00003001 INTL 20051117)
[    0.159598] ACPI: Dynamic OEM Table Load:
[    0.159600] ACPI: SSDT           (null) 00083B (v01  PmRef  Cpu0Cst 00003001 INTL 20051117)
[    0.168442] ACPI: SSDT 00000000ba023a98 000303 (v01  PmRef    ApIst 00003000 INTL 20051117)
[    0.168828] ACPI: Dynamic OEM Table Load:
[    0.168829] ACPI: SSDT           (null) 000303 (v01  PmRef    ApIst 00003000 INTL 20051117)
[    0.178340] ACPI: SSDT 00000000ba024c18 000119 (v01  PmRef    ApCst 00003000 INTL 20051117)
[    0.178697] ACPI: Dynamic OEM Table Load:
[    0.178699] ACPI: SSDT           (null) 000119 (v01  PmRef    ApCst 00003000 INTL 20051117)
[    1.470535] ACPI: Interpreter enabled
[    1.470542] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131218/hwxface-580)
[    1.470547] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131218/hwxface-580)
[    1.470561] ACPI: (supports S0 S3 S4 S5)
[    1.470562] ACPI: Using IOAPIC for interrupt routing
[    1.470585] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    1.470737] ACPI: No dock devices found.
[    1.493777] ACPI: \_PR_.CPU4: failed to get CPU APIC ID.
[    1.493780] ACPI: \_PR_.CPU5: failed to get CPU APIC ID.
[    1.493783] ACPI: \_PR_.CPU6: failed to get CPU APIC ID.
[    1.493785] ACPI: \_PR_.CPU7: failed to get CPU APIC ID.
[    1.493978] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[    1.493982] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    1.494168] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME]
[    1.494277] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
[    1.494830] PCI host bridge to bus 0000:00
[    1.494832] pci_bus 0000:00: root bus resource [bus 00-3e]
[    1.494834] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    1.494836] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
[    1.494837] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    1.494839] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
[    1.494840] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[    1.494842] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[    1.494843] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
[    1.494844] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
[    1.494846] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
[    1.494847] pci_bus 0000:00: root bus resource [mem 0xbfa00000-0xfeafffff]
[    1.494854] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
[    1.494938] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
[    1.494948] pci 0000:00:02.0: reg 0x10: [mem 0xbfc00000-0xbfffffff 64bit]
[    1.494954] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
[    1.494958] pci 0000:00:02.0: reg 0x20: [io  0x3000-0x303f]
[    1.495053] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
[    1.495076] pci 0000:00:14.0: reg 0x10: [mem 0xc0200000-0xc020ffff 64bit]
[    1.495147] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    1.495201] pci 0000:00:14.0: System wakeup disabled by ACPI
[    1.495241] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
[    1.495265] pci 0000:00:16.0: reg 0x10: [mem 0xc021a000-0xc021a00f 64bit]
[    1.495341] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    1.495424] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
[    1.495445] pci 0000:00:1a.0: reg 0x10: [mem 0xc0218000-0xc02183ff]
[    1.495536] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    1.495593] pci 0000:00:1a.0: System wakeup disabled by ACPI
[    1.495632] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
[    1.495647] pci 0000:00:1b.0: reg 0x10: [mem 0xc0210000-0xc0213fff 64bit]
[    1.495723] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    1.495764] pci 0000:00:1b.0: System wakeup disabled by ACPI
[    1.495799] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
[    1.495880] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    1.495924] pci 0000:00:1c.0: System wakeup disabled by ACPI
[    1.495958] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400
[    1.496038] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    1.496082] pci 0000:00:1c.1: System wakeup disabled by ACPI
[    1.496125] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
[    1.496146] pci 0000:00:1d.0: reg 0x10: [mem 0xc0217000-0xc02173ff]
[    1.496236] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    1.496292] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    1.496329] pci 0000:00:1f.0: [8086:1e59] type 00 class 0x060100
[    1.496498] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
[    1.496516] pci 0000:00:1f.2: reg 0x10: [io  0x30b0-0x30b7]
[    1.496524] pci 0000:00:1f.2: reg 0x14: [io  0x30a0-0x30a3]
[    1.496532] pci 0000:00:1f.2: reg 0x18: [io  0x3090-0x3097]
[    1.496540] pci 0000:00:1f.2: reg 0x1c: [io  0x3080-0x3083]
[    1.496548] pci 0000:00:1f.2: reg 0x20: [io  0x3060-0x307f]
[    1.496557] pci 0000:00:1f.2: reg 0x24: [mem 0xc0216000-0xc02167ff]
[    1.496602] pci 0000:00:1f.2: PME# supported from D3hot
[    1.496670] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
[    1.496687] pci 0000:00:1f.3: reg 0x10: [mem 0xc0215000-0xc02150ff 64bit]
[    1.496707] pci 0000:00:1f.3: reg 0x20: [io  0x3040-0x305f]
[    1.496931] pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000
[    1.497000] pci 0000:01:00.0: reg 0x10: [io  0x2000-0x20ff]
[    1.497127] pci 0000:01:00.0: reg 0x18: [mem 0xc0104000-0xc0104fff 64bit pref]
[    1.497197] pci 0000:01:00.0: reg 0x20: [mem 0xc0100000-0xc0103fff 64bit pref]
[    1.497567] pci 0000:01:00.0: supports D1 D2
[    1.497569] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    1.497696] pci 0000:01:00.0: System wakeup disabled by ACPI
[    1.503850] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    1.503854] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
[    1.503859] pci 0000:00:1c.0:   bridge window [mem 0xc0100000-0xc01fffff]
[    1.503950] pci 0000:02:00.0: [168c:0032] type 00 class 0x028000
[    1.503977] pci 0000:02:00.0: reg 0x10: [mem 0xc0000000-0xc007ffff 64bit]
[    1.504041] pci 0000:02:00.0: reg 0x30: [mem 0xc0080000-0xc008ffff pref]
[    1.504126] pci 0000:02:00.0: supports D1 D2
[    1.504127] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    1.504157] pci 0000:02:00.0: System wakeup disabled by ACPI
[    1.510480] pci 0000:00:1c.1: PCI bridge to [bus 02]
[    1.510492] pci 0000:00:1c.1:   bridge window [mem 0xc0000000-0xc00fffff]
[    1.510529] acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported)
[    1.513949] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[    1.513993] ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 10 11 12 14 15)
[    1.514035] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
[    1.514076] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
[    1.514116] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    1.514157] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    1.514198] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 10 11 12 14 15)
[    1.514239] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 *4 5 6 10 11 12 14 15)
[    1.514323] ACPI: Enabled 5 GPEs in block 00 to 3F
[    1.514353] ACPI : EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[    1.516500] ACPI : EC: 0 stale EC events cleared
[    1.516625] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    1.516628] vgaarb: loaded
[    1.516629] vgaarb: bridge control possible 0000:00:02.0
[    1.516644] PCI: Using ACPI for IRQ routing
[    1.518221] PCI: pci_cache_line_size set to 64 bytes
[    1.518264] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[    1.518266] e820: reserve RAM buffer [mem 0x40004000-0x43ffffff]
[    1.518267] e820: reserve RAM buffer [mem 0xb9be5000-0xbbffffff]
[    1.518269] e820: reserve RAM buffer [mem 0xba8ad000-0xbbffffff]
[    1.518271] e820: reserve RAM buffer [mem 0xbacfb000-0xbbffffff]
[    1.518272] e820: reserve RAM buffer [mem 0xbb000000-0xbbffffff]
[    1.518273] e820: reserve RAM buffer [mem 0x23f600000-0x23fffffff]
[    1.518353] NetLabel: Initializing
[    1.518354] NetLabel:  domain hash size = 128
[    1.518355] NetLabel:  protocols = UNLABELED CIPSOv4
[    1.518365] NetLabel:  unlabeled traffic allowed by default
[    1.518381] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    1.518386] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    1.520410] Switched to clocksource hpet
[    1.524219] pnp: PnP ACPI init
[    1.524233] ACPI: bus type PNP registered
[    1.524310] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[    1.524313] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    1.524323] pnp 00:01: [dma 4]
[    1.524339] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[    1.524357] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
[    1.524440] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
[    1.524474] system 00:04: [io  0x0680-0x069f] has been reserved
[    1.524476] system 00:04: [io  0x1000-0x100f] has been reserved
[    1.524478] system 00:04: [io  0xffff] has been reserved
[    1.524480] system 00:04: [io  0xffff] has been reserved
[    1.524481] system 00:04: [io  0x0400-0x0453] could not be reserved
[    1.524483] system 00:04: [io  0x0458-0x047f] has been reserved
[    1.524485] system 00:04: [io  0x0500-0x057f] has been reserved
[    1.524486] system 00:04: [io  0x164e-0x164f] has been reserved
[    1.524488] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.524529] system 00:05: [io  0x0454-0x0457] has been reserved
[    1.524531] system 00:05: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    1.524572] system 00:06: [io  0x04d0-0x04d1] has been reserved
[    1.524574] system 00:06: [io  0xfd60-0xfd63] has been reserved
[    1.524576] system 00:06: [mem 0xff000000-0xff000fff] has been reserved
[    1.524578] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.524603] pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
[    1.524639] pnp 00:08: Plug and Play ACPI device, IDs SYN2601 PNP0f13 (active)
[    1.524665] pnp 00:09: Plug and Play ACPI device, IDs MSF0001 PNP030b (active)
[    1.527152] pnp 00:0a: Plug and Play ACPI device, IDs PNP0b00 (active)
[    1.527357] system 00:0b: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    1.527359] system 00:0b: [mem 0xfed10000-0xfed17fff] has been reserved
[    1.527361] system 00:0b: [mem 0xfed18000-0xfed18fff] has been reserved
[    1.527363] system 00:0b: [mem 0xfed19000-0xfed19fff] has been reserved
[    1.527364] system 00:0b: [mem 0xf8000000-0xfbffffff] has been reserved
[    1.527366] system 00:0b: [mem 0xfed20000-0xfed3ffff] has been reserved
[    1.527368] system 00:0b: [mem 0xfed90000-0xfed93fff] has been reserved
[    1.527369] system 00:0b: [mem 0xfed45000-0xfed8ffff] has been reserved
[    1.527371] system 00:0b: [mem 0xff010000-0xffffffff] has been reserved
[    1.527373] system 00:0b: [mem 0xfee00000-0xfeefffff] could not be reserved
[    1.527375] system 00:0b: [mem 0xbfa00000-0xbfa00fff] has been reserved
[    1.527377] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.527555] system 00:0c: [mem 0x20000000-0x201fffff] has been reserved
[    1.527557] system 00:0c: [mem 0x40004000-0x40004fff] has been reserved
[    1.527559] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
[    1.527572] pnp: PnP ACPI: found 13 devices
[    1.527573] ACPI: bus type PNP unregistered
[    1.533850] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    1.533855] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
[    1.533860] pci 0000:00:1c.0:   bridge window [mem 0xc0100000-0xc01fffff]
[    1.533868] pci 0000:00:1c.1: PCI bridge to [bus 02]
[    1.533873] pci 0000:00:1c.1:   bridge window [mem 0xc0000000-0xc00fffff]
[    1.533882] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    1.533884] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    1.533886] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    1.533887] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
[    1.533888] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
[    1.533890] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
[    1.533891] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
[    1.533893] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff]
[    1.533894] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff]
[    1.533896] pci_bus 0000:00: resource 13 [mem 0xbfa00000-0xfeafffff]
[    1.533898] pci_bus 0000:01: resource 0 [io  0x2000-0x2fff]
[    1.533899] pci_bus 0000:01: resource 1 [mem 0xc0100000-0xc01fffff]
[    1.533901] pci_bus 0000:02: resource 1 [mem 0xc0000000-0xc00fffff]
[    1.533925] NET: Registered protocol family 2
[    1.534069] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[    1.534205] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    1.534316] TCP: Hash tables configured (established 65536 bind 65536)
[    1.534331] TCP: reno registered
[    1.534340] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    1.534366] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    1.534423] NET: Registered protocol family 1
[    1.534433] pci 0000:00:02.0: Boot video device
[    1.567239] PCI: CLS 64 bytes, default 64
[    1.567279] Unpacking initramfs...
[    1.616850] Freeing initrd memory: 3104K (ffff8800379e0000 - ffff880037ce8000)
[    1.616855] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    1.616857] software IO TLB [mem 0xb5be5000-0xb9be5000] (64MB) mapped at [ffff8800b5be5000-ffff8800b9be4fff]
[    1.617017] RAPL PMU detected, hw unit 2^-16 Joules, API unit is 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer
[    1.617048] Scanning for low memory corruption every 60 seconds
[    1.617259] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    1.628322] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    1.629380] zbud: loaded
[    1.629513] VFS: Disk quotas dquot_6.5.2
[    1.629547] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.629645] msgmni has been set to 15758
[    1.629685] Key type big_key registered
[    1.629851] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    1.629887] io scheduler noop registered
[    1.629888] io scheduler deadline registered
[    1.629911] io scheduler cfq registered (default)
[    1.630196] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.630208] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.630230] vesafb: mode is 1366x768x32, linelength=5504, pages=0
[    1.630231] vesafb: scrolling: redraw
[    1.630233] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    1.630714] vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90004e80000, using 4160k, total 4160k
[    1.697805] Console: switching to colour frame buffer device 170x48
[    1.764635] fb0: VESA VGA frame buffer device
[    1.764645] intel_idle: MWAIT substates: 0x21120
[    1.764646] intel_idle: v0.4 model 0x3A
[    1.764647] intel_idle: lapic_timer_reliable_states 0xffffffff
[    1.764791] GHES: HEST is not enabled!
[    1.764834] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    1.765185] Linux agpgart interface v0.103
[    1.765337] rtc_cmos 00:0a: rtc core: registered rtc_cmos as rtc0
[    1.765366] rtc_cmos 00:0a: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    1.765373] Intel P-state driver initializing.
[    1.765381] Intel pstate controlling: cpu 0
[    1.765398] Intel pstate controlling: cpu 1
[    1.765408] Intel pstate controlling: cpu 2
[    1.765417] Intel pstate controlling: cpu 3
[    1.765440] ledtrig-cpu: registered to indicate activity on CPUs
[    1.765548] TCP: cubic registered
[    1.765626] NET: Registered protocol family 10
[    1.765782] NET: Registered protocol family 17
[    1.765980] registered taskstats version 1
[    1.766278]   Magic number: 14:841:747
[    1.766351] rtc_cmos 00:0a: setting system clock to 2014-05-02 19:44:09 UTC (1399059849)
[    1.766409] PM: Checking hibernation image partition /dev/disk/by-uuid/232de61d-c508-4454-aa7f-c61338fe4e5e
[    1.766411] PM: Hibernation image not present or could not be loaded.
[    1.767051] Freeing unused kernel memory: 1112K (ffffffff818ca000 - ffffffff819e0000)
[    1.767052] Write protecting the kernel read-only data: 8192k
[    1.769460] Freeing unused kernel memory: 1112K (ffff8800014ea000 - ffff880001600000)
[    1.770421] Freeing unused kernel memory: 436K (ffff880001793000 - ffff880001800000)
[    1.777266] random: systemd-tmpfile urandom read with 3 bits of entropy available
[    1.778755] systemd-udevd[57]: starting version 212
[    1.796722] i8042: PNP: PS/2 Controller [PNP030b:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    1.809172] ACPI: bus type USB registered
[    1.809199] usbcore: registered new interface driver usbfs
[    1.809210] usbcore: registered new interface driver hub
[    1.809279] usbcore: registered new device driver usb
[    1.810060] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.810257] ehci-pci: EHCI PCI platform driver
[    1.810467] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.810478] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[    1.810593] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    1.810623] xhci_hcd 0000:00:14.0: irq 40 for MSI/MSI-X
[    1.811064] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.811083] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.811195] hub 1-0:1.0: USB hub found
[    1.811213] hub 1-0:1.0: 4 ports detected
[    1.811781] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.811788] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    1.812043] hub 2-0:1.0: USB hub found
[    1.812058] hub 2-0:1.0: 4 ports detected
[    1.812706] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    1.812714] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 3
[    1.812729] ehci-pci 0000:00:1a.0: debug port 2
[    1.812771] SCSI subsystem initialized
[    1.813836] libata version 3.00 loaded.
[    1.816633] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    1.816657] ehci-pci 0000:00:1a.0: irq 16, io mem 0xc0218000
[    1.824110] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    1.824374] hub 3-0:1.0: USB hub found
[    1.824386] hub 3-0:1.0: 2 ports detected
[    1.824763] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    1.824772] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 4
[    1.824789] ehci-pci 0000:00:1d.0: debug port 2
[    1.828700] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    1.828720] ehci-pci 0000:00:1d.0: irq 23, io mem 0xc0217000
[    1.837476] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    1.837802] hub 4-0:1.0: USB hub found
[    1.837808] hub 4-0:1.0: 2 ports detected
[    1.838065] ahci 0000:00:1f.2: version 3.0
[    1.838238] ahci 0000:00:1f.2: irq 41 for MSI/MSI-X
[    1.838270] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[    1.843069] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    1.850929] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x11 impl SATA mode
[    1.850938] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part ems apst 
[    1.859994] scsi0 : ahci
[    1.860437] scsi1 : ahci
[    1.860878] scsi2 : ahci
[    1.861142] scsi3 : ahci
[    1.861393] scsi4 : ahci
[    1.861650] scsi5 : ahci
[    1.861768] ata1: SATA max UDMA/133 abar m2048@0xc0216000 port 0xc0216100 irq 41
[    1.861773] ata2: DUMMY
[    1.861776] ata3: DUMMY
[    1.861778] ata4: DUMMY
[    1.861784] ata5: SATA max UDMA/133 abar m2048@0xc0216000 port 0xc0216300 irq 41
[    1.861787] ata6: DUMMY
[    2.131238] usb 3-1: new high-speed USB device number 2 using ehci-pci
[    2.181275] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.188082] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[    2.188090] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[    2.188094] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[    2.194542] ata1.00: ATA-8: ST1000LM024 HN-M101MBB, 2AR10002, max UDMA/133
[    2.194549] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    2.201383] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[    2.201390] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[    2.201395] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[    2.207827] ata1.00: configured for UDMA/133
[    2.208175] scsi 0:0:0:0: Direct-Access     ATA      ST1000LM024 HN-M 2AR1 PQ: 0 ANSI: 5
[    2.255631] hub 3-1:1.0: USB hub found
[    2.255763] hub 3-1:1.0: 6 ports detected
[    2.361527] usb 4-1: new high-speed USB device number 2 using ehci-pci
[    2.485869] hub 4-1:1.0: USB hub found
[    2.486007] hub 4-1:1.0: 6 ports detected
[    2.528336] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.530501] ata5.00: ATAPI: TSSTcorp CDDVDW SN-208BB, SC01, max UDMA/100
[    2.534898] ata5.00: configured for UDMA/100
[    2.547252] scsi 4:0:0:0: CD-ROM            TSSTcorp CDDVDW SN-208BB  SC01 PQ: 0 ANSI: 5
[    2.555870] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[    2.555876] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    2.555934] sd 0:0:0:0: [sda] Write Protect is off
[    2.555938] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.555962] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.565242] usb 3-1.1: new high-speed USB device number 3 using ehci-pci
[    2.569849] sr0: scsi3-mmc drive: 16x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.569856] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.570224] sr 4:0:0:0: Attached scsi CD-ROM sr0
[    2.605217]  sda: sda1 sda2 < sda5 > sda3
[    2.606621] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.618369] tsc: Refined TSC clocksource calibration: 2494.333 MHz
[    2.715468] usb 3-1.2: new full-speed USB device number 4 using ehci-pci
[    2.868816] usb 3-1.4: new high-speed USB device number 5 using ehci-pci
[    3.464634] PM: Starting manual resume from disk
[    3.464642] PM: Hibernation image partition 8:5 present
[    3.464644] PM: Looking for hibernation image.
[    3.464847] PM: Image not found (code -22)
[    3.464852] PM: Hibernation image not present or could not be loaded.
[    3.619752] Switched to clocksource tsc
[    3.811947] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[    3.903134] random: nonblocking pool is initialized
[    4.773082] systemd[1]: systemd 212 running in system mode. (+PAM -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ +SECCOMP -APPARMOR)
[    4.773358] systemd[1]: Detected architecture 'x86-64'.
[    4.780715] systemd[1]: Set hostname to <np350v>.
[    6.444166] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[    6.444268] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    6.444289] systemd[1]: Starting Login Prompts.
[    6.445292] systemd[1]: Reached target Login Prompts.
[    6.445310] systemd[1]: Starting Remote File Systems.
[    6.446392] systemd[1]: Reached target Remote File Systems.
[    6.446433] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[    6.448320] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    6.448350] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[    6.448398] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    6.448413] systemd[1]: Starting Paths.
[    6.449236] systemd[1]: Reached target Paths.
[    6.449253] systemd[1]: Starting Encrypted Volumes.
[    6.450278] systemd[1]: Reached target Encrypted Volumes.
[    6.450295] systemd[1]: Expecting device dev-sda5.device...
[    6.451238] systemd[1]: Expecting device dev-sda1.device...
[    6.452180] systemd[1]: Starting Root Slice.
[    6.462633] systemd[1]: Created slice Root Slice.
[    6.462653] systemd[1]: Starting Delayed Shutdown Socket.
[    6.463727] systemd[1]: Listening on Delayed Shutdown Socket.
[    6.463743] systemd[1]: Starting Device-mapper event daemon FIFOs.
[    6.464910] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[    6.464925] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[    6.466169] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    6.466184] systemd[1]: Starting LVM2 metadata daemon socket.
[    6.467200] systemd[1]: Listening on LVM2 metadata daemon socket.
[    6.467214] systemd[1]: Starting User and Session Slice.
[    6.468337] systemd[1]: Created slice User and Session Slice.
[    6.468357] systemd[1]: Starting udev Kernel Socket.
[    6.469240] systemd[1]: Listening on udev Kernel Socket.
[    6.469257] systemd[1]: Starting udev Control Socket.
[    6.470165] systemd[1]: Listening on udev Control Socket.
[    6.470182] systemd[1]: Starting Journal Socket.
[    6.471035] systemd[1]: Listening on Journal Socket.
[    6.471058] systemd[1]: Starting System Slice.
[    6.472032] systemd[1]: Created slice System Slice.
[    6.472055] systemd[1]: Started File System Check on Root Device.
[    6.472070] systemd[1]: Starting Remount Root and Kernel File Systems...
[    6.518315] systemd[1]: Started Set Up Additional Binary Formats.
[    6.519523] systemd[1]: Starting Apply Kernel Variables...
[    6.546822] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[    6.564821] systemd[1]: Started Load Kernel Modules.
[    6.564894] systemd[1]: Mounting Configuration File System...
[    6.566603] systemd[1]: Mounted FUSE Control File System.
[    6.566643] systemd[1]: Mounting Debug File System...
[    6.568015] systemd[1]: Starting Setup Virtual Console...
[    6.569491] systemd[1]: Starting system-getty.slice.
[    6.570796] systemd[1]: Created slice system-getty.slice.
[    6.570837] systemd[1]: Starting udev Coldplug all Devices...
[    6.572348] systemd[1]: Mounting POSIX Message Queue File System...
[    6.573967] systemd[1]: Mounting Huge Pages File System...
[    6.575435] systemd[1]: Starting Journal Service...
[    6.577646] systemd[1]: Started Journal Service.
[    7.672706] EXT4-fs (sda3): re-mounted. Opts: data=ordered
[    8.064015] systemd-udevd[166]: starting version 212
[    8.184757] systemd-journald[145]: Received request to flush runtime journal from PID 1
[   11.140961] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042f conflicts with OpRegion 0x0000000000000400-0x000000000000047f (\PMIO) (20131218/utaddress-258)
[   11.140976] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   11.140983] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20131218/utaddress-258)
[   11.140989] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   11.140991] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20131218/utaddress-258)
[   11.140997] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   11.140999] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   11.348382] input: PC Speaker as /devices/platform/pcspkr/input/input2
[   11.353800] ACPI Warning: SystemIO range 0x0000000000003040-0x000000000000305f conflicts with OpRegion 0x0000000000003040-0x000000000000304f (\_SB_.PCI0.SBUS.SMBI) (20131218/utaddress-258)
[   11.353817] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   11.372729] mei_me 0000:00:16.0: irq 42 for MSI/MSI-X
[   11.383629] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   11.417481] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
[   11.417489] ACPI: Power Button [PWRB]
[   11.417583] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input4
[   11.417643] ACPI: Lid Switch [LID0]
[   11.417725] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[   11.417730] ACPI: Power Button [PWRF]
[   11.493552] wmi: Mapper loaded
[   11.513129] ACPI: AC Adapter [ACAD] (on-line)
[   11.538576] [Firmware Bug]: battery: (dis)charge rate invalid.
[   11.538624] ACPI: Battery Slot [BAT1] (battery present)
[   11.807809] thermal LNXTHERM:00: registered as thermal_zone0
[   11.807820] ACPI: Thermal Zone [TZ00] (26 C)
[   11.977576] microcode: CPU0 sig=0x306a9, pf=0x10, revision=0x15
[   12.004575] [drm] Initialized drm 1.1.0 20060810
[   12.316338] microcode: CPU1 sig=0x306a9, pf=0x10, revision=0x15
[   12.316404] microcode: CPU2 sig=0x306a9, pf=0x10, revision=0x15
[   12.316446] microcode: CPU3 sig=0x306a9, pf=0x10, revision=0x15
[   12.316626] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[   12.542583] snd_hda_intel 0000:00:1b.0: irq 43 for MSI/MSI-X
[   13.068755] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[   13.068769] r8169 0000:01:00.0: can't disable ASPM; OS doesn't have ASPM control
[   13.069101] r8169 0000:01:00.0: irq 44 for MSI/MSI-X
[   13.069393] r8169 0000:01:00.0 eth0: RTL8168f/8111f at 0xffffc90005aaa000, 20:89:84:0f:7d:91, XID 08000880 IRQ 44
[   13.069398] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[   13.081366] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[   13.081506] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[   13.081612] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[   13.167698] iTCO_vendor_support: vendor-support=0
[   13.324048] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
[   13.324115] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0460)
[   13.324317] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   13.337452] systemd-udevd[181]: renamed network interface eth0 to enp1s0
[   13.342516] [drm] Memory usable by graphics device = 2048M
[   13.342523] checking generic (d0000000 410000) vs hw (d0000000 10000000)
[   13.342526] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
[   13.342547] Console: switching to colour dummy device 80x25
[   13.414058] i915 0000:00:02.0: irq 45 for MSI/MSI-X
[   13.414070] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[   13.414073] [drm] Driver supports precise vblank timestamp query.
[   13.414161] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[   13.460173] fbcon: inteldrmfb (fb0) is primary device
[   13.630083] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.5, id: 0x1e0b1, caps: 0xf00333/0x240000/0xa2400, board id: 1874, fw id: 1116252
[   13.692856] samsung_laptop: detected SABI interface: SwSmi@
[   13.692857] samsung_laptop: Backlight controlled by ACPI video driver
[   13.703446] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6
[   13.841358] mousedev: PS/2 mouse device common for all mice
[   13.843434] cfg80211: Calling CRDA to update world regulatory domain
[   14.158322] Console: switching to colour frame buffer device 170x48
[   14.163292] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[   14.163294] i915 0000:00:02.0: registered panic notifier
[   14.189466] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[   14.192744] acpi device:58: registered as cooling_device4
[   14.192970] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input10
[   14.193143] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[   14.682403] ath: phy0: Set BT/WLAN RX diversity capability
[   14.690070] ath: EEPROM regdomain: 0x65
[   14.690074] ath: EEPROM indicates we should expect a direct regpair map
[   14.690079] ath: Country alpha2 being used: 00
[   14.690081] ath: Regpair used: 0x65
[   14.996687] media: Linux media interface: v0.10
[   15.115083] Bluetooth: Core ver 2.18
[   15.115111] NET: Registered protocol family 31
[   15.115114] Bluetooth: HCI device and connection manager initialized
[   15.115124] Bluetooth: HCI socket layer initialized
[   15.115127] Bluetooth: L2CAP socket layer initialized
[   15.115147] Bluetooth: SCO socket layer initialized
[   15.221244] Linux video capture interface: v2.00
[   15.262913] rts5139: module is from the staging directory, the quality is unknown, you have been warned.
[   15.267171] scsi6 : SCSI emulation for RTS5139 USB card reader
[   15.267390] scsi 6:0:0:0: Direct-Access     Generic- xD/SD/M.S.       1.00 PQ: 0 ANSI: 0 CCS
[   15.267416] usbcore: registered new interface driver rts5139
[   15.338396] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[   15.369895] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off
[   15.463054] uvcvideo: Found UVC 1.00 device WebCam SC-13HDL11939N (2232:1029)
[   15.474438] input: WebCam SC-13HDL11939N as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.4/3-1.4:1.0/input/input11
[   15.474549] usbcore: registered new interface driver uvcvideo
[   15.474552] USB Video Class driver (1.1.1)
[   15.810187] AVX version of gcm_enc/dec engaged.
[   15.811948] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   15.812413] ieee80211 phy0: Atheros AR9485 Rev:1 mem=0xffffc90006700000, irq=17
[   15.950472] systemd-udevd[181]: renamed network interface wlan0 to wlp2s0
[   16.076099] usbcore: registered new interface driver btusb
[   16.317821] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[   16.672295] usbcore: registered new interface driver ath3k
[   16.682863] usb 3-1.2: USB disconnect, device number 4
[   16.871482] usb 3-1.2: new full-speed USB device number 6 using ehci-pci
[   17.235428] Adding 16778236k swap on /dev/sda5.  Priority:-1 extents:1 across:16778236k FS
[   17.256892] intel_rapl: domain uncore energy ctr 22709:22709 not working, skip
[   24.689911] r8169 0000:01:00.0 enp1s0: link down
[   24.689964] IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready
[   24.707009] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[   27.062816] wlp2s0: authenticate with 88:03:55:d0:14:fd
[   27.070119] wlp2s0: send auth to 88:03:55:d0:14:fd (try 1/3)
[   27.071892] wlp2s0: authenticated
[   27.072944] wlp2s0: associate with 88:03:55:d0:14:fd (try 1/3)
[   27.076164] wlp2s0: RX AssocResp from 88:03:55:d0:14:fd (capab=0x431 status=0 aid=5)
[   27.076245] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[   27.076411] wlp2s0: associated
[  333.048571] fuse init (API version 7.22)
[  334.343366] usb 1-3: new high-speed USB device number 2 using xhci_hcd
[  334.503557] usb 1-3: device descriptor read/64, error -71
[  334.607010] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 1.
[  334.767202] usb 1-3: new high-speed USB device number 3 using xhci_hcd
[  336.129162] cdc_acm 1-3:1.0: This device cannot do calls on its own. It is not a modem.
[  336.129235] cdc_acm 1-3:1.0: ttyACM0: USB ACM device
[  336.129899] usbcore: registered new interface driver cdc_acm
[  336.129902] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[  336.191227] usb-storage 1-3:1.3: USB Mass Storage device detected
[  336.191425] scsi7 : usb-storage 1-3:1.3
[  336.191605] usbcore: registered new interface driver usb-storage
[  337.193895] scsi 7:0:0:0: Direct-Access     SAMSUNG  GT-S5670 Card    ffff PQ: 0 ANSI: 2
[  337.195656] sd 7:0:0:0: [sdc] Attached SCSI removable disk
[  360.860264] usb 1-3: USB disconnect, device number 3
[ 1245.165770] usb 1-3: new high-speed USB device number 5 using xhci_hcd
[ 1245.342691] cdc_acm 1-3:1.0: This device cannot do calls on its own. It is not a modem.
[ 1245.342769] cdc_acm 1-3:1.0: ttyACM0: USB ACM device
[ 1245.344737] usb-storage 1-3:1.3: USB Mass Storage device detected
[ 1245.344901] scsi8 : usb-storage 1-3:1.3
[ 1245.649539] usb 1-3: USB disconnect, device number 5
[ 1245.959966] usb 1-3: new high-speed USB device number 6 using xhci_hcd
[ 1255.717677] usb 1-3: new high-speed USB device number 7 using xhci_hcd
[ 1255.894695] cdc_acm 1-3:1.0: This device cannot do calls on its own. It is not a modem.
[ 1255.894767] cdc_acm 1-3:1.0: ttyACM0: USB ACM device
[ 1255.896663] usb-storage 1-3:1.3: USB Mass Storage device detected
[ 1255.896782] scsi9 : usb-storage 1-3:1.3
[ 1256.899492] scsi 9:0:0:0: Direct-Access     SAMSUNG  GT-S5670 Card    ffff PQ: 0 ANSI: 2
[ 1256.900961] sd 9:0:0:0: [sdc] Attached SCSI removable disk
[ 3844.887938] usb 1-3: USB disconnect, device number 7
[ 3845.202307] usb 1-3: new high-speed USB device number 8 using xhci_hcd
[ 3845.379138] cdc_acm 1-3:1.0: This device cannot do calls on its own. It is not a modem.
[ 3845.379205] cdc_acm 1-3:1.0: ttyACM0: USB ACM device
[ 3845.381149] usb-storage 1-3:1.3: USB Mass Storage device detected
[ 3845.381366] scsi10 : usb-storage 1-3:1.3
[ 3846.544022] usb 1-3: reset high-speed USB device number 8 using xhci_hcd
[ 3846.544067] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 7.
[ 3846.704110] usb 1-3: reset high-speed USB device number 8 using xhci_hcd
[ 3846.704167] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 7.
[ 3846.864295] usb 1-3: reset high-speed USB device number 8 using xhci_hcd
[ 3846.878777] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800a6fc6b40
[ 3846.878784] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800a6fc6b00
[ 3846.878788] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800a6fc6e40
[ 3846.878791] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88007c4eea80
[ 3846.878795] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800a6fc6840
[ 3846.878798] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800a6fc6e00
[ 3846.878801] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800a6fc6fc0
[ 3846.878804] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800a6fc6800
[ 3846.878807] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800a6fc6f80
[ 3846.879526] cdc_acm 1-3:1.0: This device cannot do calls on its own. It is not a modem.
[ 3846.879610] cdc_acm 1-3:1.0: ttyACM0: USB ACM device
[ 3846.897758] scsi 10:0:0:0: Direct-Access     SAMSUNG  GT-S5670 Card    ffff PQ: 0 ANSI: 2
[ 3846.907338] sd 10:0:0:0: [sdc] Attached SCSI removable disk
[ 3969.887500] usb 1-3: USB disconnect, device number 8
[ 3972.990506] wlp2s0: deauthenticating from 88:03:55:d0:14:fd by local choice (reason=3)
[ 3973.004615] cfg80211: Calling CRDA for country: ES
[ 3973.345648] PM: Syncing filesystems ... done.
[ 3973.774361] PM: Preparing system for mem sleep
[ 3973.774560] Freezing user space processes ... (elapsed 0.002 seconds) done.
[ 3973.776795] Freezing remaining freezable tasks ... (elapsed 0.000 seconds) done.
[ 3973.777561] PM: Entering mem sleep
[ 3973.777682] Suspending console(s) (use no_console_suspend to debug)
[ 3973.778206] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 3973.867693] sd 0:0:0:0: [sda] Stopping disk
[ 3974.832088] PM: suspend of devices complete after 1053.039 msecs
[ 3974.832320] PM: late suspend of devices complete after 0.228 msecs
[ 3974.845570] r8169 0000:01:00.0: System wakeup enabled by ACPI
[ 3974.858903] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
[ 3974.872307] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
[ 3974.898837] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
[ 3974.912178] PM: noirq suspend of devices complete after 79.764 msecs
[ 3974.912619] ACPI: Preparing to enter system sleep state S3
[ 3974.912926] PM: Saving platform NVS memory
[ 3974.914614] Disabling non-boot CPUs ...
[ 3974.916061] kvm: disabling virtualization on CPU1
[ 3974.916553] smpboot: CPU 1 is now offline
[ 3974.918332] kvm: disabling virtualization on CPU2
[ 3975.018892] smpboot: CPU 2 is now offline
[ 3975.020563] kvm: disabling virtualization on CPU3
[ 3975.122341] smpboot: CPU 3 is now offline
[ 3975.123973] ACPI: Low-level resume complete
[ 3975.124015] PM: Restoring platform NVS memory
[ 3975.124533] Enabling non-boot CPUs ...
[ 3975.124574] x86: Booting SMP configuration:
[ 3975.124576] smpboot: Booting Node 0 Processor 1 APIC 0x2
[ 3975.136021] kvm: enabling virtualization on CPU1
[ 3975.138264] Intel pstate controlling: cpu 1
[ 3975.138319] CPU1 is up
[ 3975.138340] smpboot: Booting Node 0 Processor 2 APIC 0x1
[ 3975.149883] kvm: enabling virtualization on CPU2
[ 3975.152111] Intel pstate controlling: cpu 2
[ 3975.152154] CPU2 is up
[ 3975.152171] smpboot: Booting Node 0 Processor 3 APIC 0x3
[ 3975.163702] kvm: enabling virtualization on CPU3
[ 3975.165948] Intel pstate controlling: cpu 3
[ 3975.165989] CPU3 is up
[ 3975.174194] ACPI : EC: 0 stale EC events cleared
[ 3975.174518] ACPI: Waking up from system sleep state S3
[ 3975.200964] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
[ 3975.227638] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 3975.254333] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 3975.294473] PM: noirq resume of devices complete after 119.451 msecs
[ 3975.294641] PM: early resume of devices complete after 0.136 msecs
[ 3975.294782] mei_me 0000:00:16.0: irq 42 for MSI/MSI-X
[ 3975.295546] snd_hda_intel 0000:00:1b.0: irq 43 for MSI/MSI-X
[ 3975.298156] r8169 0000:01:00.0: System wakeup disabled by ACPI
[ 3975.501348] usb 3-1.1: reset high-speed USB device number 3 using ehci-pci
[ 3975.631371] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3975.637196] ata5.00: configured for UDMA/100
[ 3975.651515] usb 3-1.2: reset full-speed USB device number 6 using ehci-pci
[ 3975.735102] usb 3-1.2: device firmware changed
[ 3975.801674] usb 3-1.4: reset high-speed USB device number 5 using ehci-pci
[ 3976.826059] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off
[ 3978.200997] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3978.207796] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[ 3978.207800] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[ 3978.207803] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 3978.221143] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[ 3978.221147] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[ 3978.221150] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 3978.227535] ata1.00: configured for UDMA/133
[ 3978.227659] sd 0:0:0:0: [sda] Starting disk
[ 3978.251051] PM: resume of devices complete after 2953.060 msecs
[ 3978.251387] PM: Finishing wakeup.
[ 3978.251391] Restarting tasks ... 
[ 3978.251490] r8169 0000:01:00.0: no hotplug settings from platform
[ 3978.264382] usb 3-1.2: USB disconnect, device number 6
[ 3978.268874] done.
[ 3978.281831] video LNXVIDEO:00: Restoring backlight state
[ 3978.331143] usb 3-1.2: new full-speed USB device number 7 using ehci-pci
[ 3978.400753] r8169 0000:01:00.0 enp1s0: link down
[ 3978.400798] IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready
[ 3978.419329] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 3978.463190] usb 3-1.2: USB disconnect, device number 7
[ 3978.651514] usb 3-1.2: new full-speed USB device number 8 using ehci-pci
[ 3979.387061] wlp2s0: authenticate with 88:03:55:d0:14:fd
[ 3979.394288] wlp2s0: send auth to 88:03:55:d0:14:fd (try 1/3)
[ 3979.396052] wlp2s0: authenticated
[ 3979.398934] wlp2s0: associate with 88:03:55:d0:14:fd (try 1/3)
[ 3979.402157] wlp2s0: RX AssocResp from 88:03:55:d0:14:fd (capab=0x431 status=0 aid=5)
[ 3979.402246] wlp2s0: associated
[ 3979.402352] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[ 6606.706253] usb 1-3: new high-speed USB device number 9 using xhci_hcd
[ 6606.883411] cdc_acm 1-3:1.0: This device cannot do calls on its own. It is not a modem.
[ 6606.883492] cdc_acm 1-3:1.0: ttyACM0: USB ACM device
[ 6606.885556] usb-storage 1-3:1.3: USB Mass Storage device detected
[ 6606.885846] scsi11 : usb-storage 1-3:1.3
[ 6607.888404] scsi 11:0:0:0: Direct-Access     SAMSUNG  GT-S5670 Card    ffff PQ: 0 ANSI: 2
[ 6607.891163] sd 11:0:0:0: [sdc] Attached SCSI removable disk
[ 7923.971097] usb 1-3: USB disconnect, device number 9
[ 7924.284639] usb 1-3: new high-speed USB device number 10 using xhci_hcd
[ 7924.444911] usb 1-3: Device not responding to setup address.
[ 7924.648400] usb 1-3: Device not responding to setup address.
[ 7924.851903] usb 1-3: device not accepting address 10, error -71
[ 7925.012122] usb 1-3: new high-speed USB device number 11 using xhci_hcd
[ 7925.172362] usb 1-3: device descriptor read/64, error -71
[ 7925.275718] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 10.
[ 7925.435910] usb 1-3: new high-speed USB device number 12 using xhci_hcd
[ 7925.450021] usb 1-3: device descriptor read/8, error -71
[ 7925.566420] usb 1-3: device descriptor read/8, error -71
[ 7925.829713] usb 1-3: new high-speed USB device number 13 using xhci_hcd
[ 7925.847298] cdc_acm 1-3:1.0: This device cannot do calls on its own. It is not a modem.
[ 7925.847363] cdc_acm 1-3:1.0: ttyACM0: USB ACM device
[ 7925.849410] usb-storage 1-3:1.3: USB Mass Storage device detected
[ 7925.849537] scsi12 : usb-storage 1-3:1.3
[ 7926.854804] scsi 12:0:0:0: Direct-Access     SAMSUNG  GT-S5670 Card    ffff PQ: 0 ANSI: 2
[ 7926.856505] sd 12:0:0:0: [sdc] Attached SCSI removable disk
[ 7952.971956] usb 1-3: USB disconnect, device number 13
[ 7953.283963] usb 1-3: new high-speed USB device number 14 using xhci_hcd
[ 7953.460395] cdc_acm 1-3:1.0: This device cannot do calls on its own. It is not a modem.
[ 7953.460451] cdc_acm 1-3:1.0: ttyACM0: USB ACM device
[ 7953.462269] usb-storage 1-3:1.3: USB Mass Storage device detected
[ 7953.462380] scsi13 : usb-storage 1-3:1.3
[ 7954.465888] scsi 13:0:0:0: Direct-Access     SAMSUNG  GT-S5670 Card    ffff PQ: 0 ANSI: 2
[ 7954.467010] sd 13:0:0:0: [sdc] Attached SCSI removable disk
[ 7997.320270] usb 1-3: USB disconnect, device number 14
[ 7997.633969] usb 1-3: new high-speed USB device number 15 using xhci_hcd
[ 7997.794127] usb 1-3: device descriptor read/64, error -71
[ 7997.897577] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 14.
[ 7998.284592] usb 1-3: new high-speed USB device number 17 using xhci_hcd
[ 7998.461717] cdc_acm 1-3:1.0: This device cannot do calls on its own. It is not a modem.
[ 7998.461782] cdc_acm 1-3:1.0: ttyACM0: USB ACM device
[ 7998.463674] usb-storage 1-3:1.3: USB Mass Storage device detected
[ 7998.463849] scsi14 : usb-storage 1-3:1.3
[ 7998.905736] usb 1-3: USB disconnect, device number 17
[ 9756.255796] perf samples too long (2519 > 2500), lowering kernel.perf_event_max_sample_rate to 50100
[10654.900238] atkbd serio0: Unknown key pressed (translated set 2, code 0xa8 on isa0060/serio0).
[10654.900250] atkbd serio0: Use 'setkeycodes e028 <keycode>' to make it known.
[11673.598689] cfg80211: Calling CRDA to update world regulatory domain
[11717.171365] wlp2s0: authenticate with 88:03:55:d0:14:fd
[11717.178678] wlp2s0: send auth to 88:03:55:d0:14:fd (try 1/3)
[11717.180444] wlp2s0: authenticated
[11717.183172] wlp2s0: associate with 88:03:55:d0:14:fd (try 1/3)
[11717.186317] wlp2s0: RX AssocResp from 88:03:55:d0:14:fd (capab=0x431 status=0 aid=5)
[11717.186392] wlp2s0: associated
[13558.256586] wlp2s0: deauthenticating from 88:03:55:d0:14:fd by local choice (reason=3)
[13558.265695] cfg80211: Calling CRDA to update world regulatory domain
[13558.410854] PM: Syncing filesystems ... done.
[13559.231350] PM: Preparing system for mem sleep
[13559.231626] Freezing user space processes ... (elapsed 0.002 seconds) done.
[13559.233724] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[13559.234889] PM: Entering mem sleep
[13559.235019] Suspending console(s) (use no_console_suspend to debug)
[13559.235569] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[13559.383056] sd 0:0:0:0: [sda] Stopping disk
[13560.481242] PM: suspend of devices complete after 1244.642 msecs
[13560.481470] PM: late suspend of devices complete after 0.224 msecs
[13560.494685] r8169 0000:01:00.0: System wakeup enabled by ACPI
[13560.508032] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
[13560.521430] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
[13560.547965] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
[13560.561302] PM: noirq suspend of devices complete after 79.739 msecs
[13560.561743] ACPI: Preparing to enter system sleep state S3
[13560.562048] PM: Saving platform NVS memory
[13560.563724] Disabling non-boot CPUs ...
[13560.565210] kvm: disabling virtualization on CPU1
[13560.565706] smpboot: CPU 1 is now offline
[13560.567439] kvm: disabling virtualization on CPU2
[13560.668027] smpboot: CPU 2 is now offline
[13560.669728] kvm: disabling virtualization on CPU3
[13560.771469] smpboot: CPU 3 is now offline
[13560.773129] ACPI: Low-level resume complete
[13560.773172] PM: Restoring platform NVS memory
[13560.773684] Enabling non-boot CPUs ...
[13560.773726] x86: Booting SMP configuration:
[13560.773727] smpboot: Booting Node 0 Processor 1 APIC 0x2
[13560.785171] kvm: enabling virtualization on CPU1
[13560.787411] Intel pstate controlling: cpu 1
[13560.787469] CPU1 is up
[13560.787490] smpboot: Booting Node 0 Processor 2 APIC 0x1
[13560.799034] kvm: enabling virtualization on CPU2
[13560.801261] Intel pstate controlling: cpu 2
[13560.801305] CPU2 is up
[13560.801321] smpboot: Booting Node 0 Processor 3 APIC 0x3
[13560.812752] kvm: enabling virtualization on CPU3
[13560.814992] Intel pstate controlling: cpu 3
[13560.815033] CPU3 is up
[13560.823319] ACPI : EC: 0 stale EC events cleared
[13560.823670] ACPI: Waking up from system sleep state S3
[13560.850092] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
[13560.876766] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
[13560.903462] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
[13560.943604] PM: noirq resume of devices complete after 119.473 msecs
[13560.943777] PM: early resume of devices complete after 0.138 msecs
[13560.943870] mei_me 0000:00:16.0: irq 42 for MSI/MSI-X
[13560.944330] snd_hda_intel 0000:00:1b.0: irq 43 for MSI/MSI-X
[13560.944570] r8169 0000:01:00.0: System wakeup disabled by ACPI
[13561.150401] usb 3-1.1: reset high-speed USB device number 3 using ehci-pci
[13561.283832] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[13561.289677] ata5.00: configured for UDMA/100
[13561.300580] usb 3-1.4: reset high-speed USB device number 5 using ehci-pci
[13561.450748] usb 3-1.2: reset full-speed USB device number 8 using ehci-pci
[13561.534342] usb 3-1.2: device firmware changed
[13562.672063] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off
[13563.840103] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[13563.846918] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[13563.846923] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[13563.846926] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[13563.860212] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[13563.860216] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[13563.860219] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[13563.866605] ata1.00: configured for UDMA/133
[13563.866777] sd 0:0:0:0: [sda] Starting disk
[13563.896538] PM: resume of devices complete after 2949.418 msecs
[13563.896905] PM: Finishing wakeup.
[13563.896908] Restarting tasks ... 
[13563.897005] r8169 0000:01:00.0: no hotplug settings from platform
[13563.897922] usb 3-1.2: USB disconnect, device number 8
[13563.898686] done.
[13563.910394] video LNXVIDEO:00: Restoring backlight state
[13563.970346] usb 3-1.2: new full-speed USB device number 9 using ehci-pci
[13564.033209] r8169 0000:01:00.0 enp1s0: link down
[13564.033309] IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready
[13564.052285] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[13564.102764] usb 3-1.2: USB disconnect, device number 9
[13564.294151] usb 3-1.2: new full-speed USB device number 10 using ehci-pci
[13565.900054] wlp2s0: authenticate with 88:03:55:d0:14:fd
[13565.915770] wlp2s0: send auth to 88:03:55:d0:14:fd (try 1/3)
[13565.917560] wlp2s0: authenticated
[13565.919125] wlp2s0: associate with 88:03:55:d0:14:fd (try 1/3)
[13565.922401] wlp2s0: RX AssocResp from 88:03:55:d0:14:fd (capab=0x431 status=0 aid=5)
[13565.922499] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[13565.922738] wlp2s0: associated
[13565.961587] wlp2s0: deauthenticating from 88:03:55:d0:14:fd by local choice (reason=2)
[13565.972512] wlp2s0: authenticate with 88:03:55:d0:14:fd
[13565.979717] wlp2s0: send auth to 88:03:55:d0:14:fd (try 1/3)
[13565.979862] cfg80211: Calling CRDA for country: ES
[13565.981482] wlp2s0: authenticated
[13565.982469] wlp2s0: associate with 88:03:55:d0:14:fd (try 1/3)
[13565.985712] wlp2s0: RX AssocResp from 88:03:55:d0:14:fd (capab=0x431 status=0 aid=5)
[13565.985853] wlp2s0: associated
[13575.997906] wlp2s0: deauthenticating from 88:03:55:d0:14:fd by local choice (reason=3)
[13576.006469] cfg80211: Calling CRDA to update world regulatory domain
[13577.002280] wlp2s0: authenticate with 88:03:55:d0:14:fd
[13577.018308] wlp2s0: send auth to 88:03:55:d0:14:fd (try 1/3)
[13577.121702] wlp2s0: send auth to 88:03:55:d0:14:fd (try 2/3)
[13577.225149] wlp2s0: send auth to 88:03:55:d0:14:fd (try 3/3)
[13577.328582] wlp2s0: authentication with 88:03:55:d0:14:fd timed out
[13589.172570] wlp2s0: authenticate with 88:03:55:d0:14:fd
[13589.186790] wlp2s0: send auth to 88:03:55:d0:14:fd (try 1/3)
[13589.288777] wlp2s0: send auth to 88:03:55:d0:14:fd (try 2/3)
[13589.392222] wlp2s0: send auth to 88:03:55:d0:14:fd (try 3/3)
[13589.495711] wlp2s0: authentication with 88:03:55:d0:14:fd timed out
[13590.420188] wlp2s0: authenticate with 88:03:55:d0:14:fd
[13590.430078] wlp2s0: send auth to 88:03:55:d0:14:fd (try 1/3)
[13590.533516] wlp2s0: send auth to 88:03:55:d0:14:fd (try 2/3)
[13590.636953] wlp2s0: send auth to 88:03:55:d0:14:fd (try 3/3)
[13590.740406] wlp2s0: authentication with 88:03:55:d0:14:fd timed out

Offline

#6 2014-05-05 09:27:36

Rexilion
Member
Registered: 2013-12-23
Posts: 784

Re: Wireless not working when resuming laptop from suspension

Your logs are not indicating an apparent failure (aprt from the time outs).

Too bad.

I suggest you try my earlier approach and see what happens (don't forget the logs please).

fs/super.c : "Self-destruct in 5 seconds.  Have a nice day...\n",

Offline

#7 2014-05-05 09:44:56

lucacerone
Member
From: Spain
Registered: 2012-05-04
Posts: 144
Website

Re: Wireless not working when resuming laptop from suspension

Thanks Rexillion,
I just wonder if it might be an issue with the router not releasing the ip address.
I have noticed that this problem arise when I forget to turn off the router.
If before turning off the laptop I restart the router and then I turn on the laptop, the connection seems to work fine.

Anyway I will try to use the modprobe commands that you suggested,
thanks for the efforts smile

Offline

#8 2014-05-05 12:39:44

Rexilion
Member
Registered: 2013-12-23
Posts: 784

Re: Wireless not working when resuming laptop from suspension

Could be, but that should not result in timeouts. However, your observation does explain why it first succeeds but then disconnects by a local reason.

Instead of the modprobe thing, you could try to use static ip addresses to rule out any rogue dhcp servers.

fs/super.c : "Self-destruct in 5 seconds.  Have a nice day...\n",

Offline

Pages: 1

Board footer

Powered by FluxBB