[SOLVED] zfs volume not mounting

theking2 · 2014-05-24 10:33:19

I've a problem with a newly create zfs set one of the volumes is not mounting. This is the setup:

# zpool status zdata
  pool: zdata
 state: ONLINE
  scan: scrub in progress since Sat May 24 12:29:24 2014
    1.71G scanned out of 20.2G at 41.6M/s, 0h7m to go
    0 repaired, 8.46% done
config:

        NAME                                           STATE     READ WRITE CKSUM
        zdata                                          ONLINE       0     0     0
          raidz1-0                                     ONLINE       0     0     0
            ata-WDC_WD10EADS-00P8B0_WD-WMAVU0350318    ONLINE       0     0     0
            ata-WDC_WD1003FBYX-01Y7B1_WD-WCAW36807048  ONLINE       0     0     0
            ata-WDC_WD10EADS-00P8B0_WD-WMAVU0606317    ONLINE       0     0     0
            ata-WDC_WD10EADS-00P8B0_WD-WCAVU0381916    ONLINE       0     0     0

errors: No known data errors

# zfs list
NAME             USED  AVAIL  REFER  MOUNTPOINT
zdata           15.1G  2.65T  41.9K  /mnt/zdata
zdata/backup    15.1G   485G  15.1G  /srv/backup
zdata/media     41.9K  1.46T  41.9K  /srv/media
zdata/software  41.9K   200G  41.9K  /srv/software

]# zfs mount
zdata                           /mnt/zdata
zdata/backup                    /srv/backup
zdata/software                  /srv/software

# zfs get mounted zdata/media
NAME         PROPERTY  VALUE    SOURCE
zdata/media  mounted   no       -

The following commando never returns:

# zfs mount zdata/media

Last edited by theking2 (2014-05-24 11:19:30)

theking2 · 2014-05-24 11:19:07

I suppose this is because of the scrub in progress. After a reboot and the scrub letting finish it was mounted.

Arch Linux

#1 2014-05-24 10:33:19

[SOLVED] zfs volume not mounting

#2 2014-05-24 11:19:07

Re: [SOLVED] zfs volume not mounting

Board footer