You are not logged in.
a ZFS pool was scrubbed. It had quite a history of kernel panics due to a faulty USB cable. ZFS "feels" that the devices were in error, which I don't believe to be true. How do I reset or reconfirm the status of the devices? If at all they cannot be faulty all of them at the same time, can they?
# zpool status -v
pool: zdata
state: ONLINE
status: One or more devices has experienced an unrecoverable error. An
attempt was made to correct the error. Applications are unaffected.
action: Determine if the device needs to be replaced, and clear the errors
using 'zpool clear' or replace the device with 'zpool replace'.
see: http://zfsonlinux.org/msg/ZFS-8000-9P
scan: scrub repaired 156M in 6h59m with 0 errors on Tue May 27 05:52:12 2014
config:
NAME STATE READ WRITE CKSUM
zdata ONLINE 0 0 0
raidz1-0 ONLINE 0 0 0
ata-WDC_WD10EADS-00P8B0_WD-WMAVU0350318 ONLINE 0 0 1.13K
ata-WDC_WD1003FBYX-01Y7B1_WD-WCAW36807048 ONLINE 0 0 929
ata-WDC_WD10EADS-00P8B0_WD-WMAVU0606317 ONLINE 0 0 1.12K
ata-WDC_WD10EADS-00P8B0_WD-WCAVU0381916 ONLINE 0 0 495
errors: No known data errors
Last edited by theking2 (2014-05-27 18:22:25)
archlinux on a Gigabyte C1037UN-EU, 16GiB
a Promise PDC40718 based ZFS set
root on a Samsung SSD PB22-J
running LogitechMediaServer(-git), Samba, MiniDLNA, TOR
Offline
ehm-. yes now
zpool clear zdata
worked.
# zpool status -v
pool: zdata
state: ONLINE
scan: scrub repaired 156M in 6h59m with 0 errors on Tue May 27 05:52:12 2014
config:
NAME STATE READ WRITE CKSUM
zdata ONLINE 0 0 0
raidz1-0 ONLINE 0 0 0
ata-WDC_WD10EADS-00P8B0_WD-WMAVU0350318 ONLINE 0 0 0
ata-WDC_WD1003FBYX-01Y7B1_WD-WCAW36807048 ONLINE 0 0 0
ata-WDC_WD10EADS-00P8B0_WD-WMAVU0606317 ONLINE 0 0 0
ata-WDC_WD10EADS-00P8B0_WD-WCAVU0381916 ONLINE 0 0 0
archlinux on a Gigabyte C1037UN-EU, 16GiB
a Promise PDC40718 based ZFS set
root on a Samsung SSD PB22-J
running LogitechMediaServer(-git), Samba, MiniDLNA, TOR
Offline