Arch Linux

mdv

Member

From: Poland

Registered: 2005-04-09

Posts: 145

suspend2 and the new archck kernel (2.6.15) with initrd

Hi everybody,
Afret upgrade from archck 2.6.13 to 2.6.15 my system does not resume any longer. I think that I should follow the instruction at the http://suspend2.epfl.ch/HOWTO-2.html which says:

Initrd/Initramfs's with Suspend2
Using an initrd with Suspend2 is possible. To use this, you MUST edit your linuxrc (or init) script to contain the line
echo > /proc/suspend2/do_resume
BEFORE the script mounts your filesystem. If the line is missing, your system will not resume. If the line comes after mounting file systems, you will most likely suffer from filesystem corruption. You have been warned.
You can now recompile your kernel with Suspend2...

What file should I edit, I did not find any linuxrc file?
Thanks in advance,
mdv

tomk

Forum Fellow

From: Ireland

Registered: 2004-07-21

Posts: 9,839

Re: suspend2 and the new archck kernel (2.6.15) with initrd

Make sure you have the latest version of mkinitramfs - 1.1-3. After installing it , rebuild your initramfs image with

mkinitramfs kernel_version=2.6.15-archck

to add the required suspend2 line.

mdv

Member

From: Poland

Registered: 2005-04-09

Posts: 145

Re: suspend2 and the new archck kernel (2.6.15) with initrd

$ dmesg | grep Suspend
Suspend2 Core.
Suspend2 Compression Driver loading.
Suspend2 Encryption Driver loading.
Suspend2 Swap Writer loading.
Suspend2 FileWriter loading.
Suspend2 2.2-rc16: Filewriter: Sorry. No signature found.
Suspend2 2.2-rc16: No matching enabled writer found. Suspending disabled.
Suspend2 2.2-rc16: Missing or invalid storage location (resume2= parameter). Please correct and rerun lilo (or equivalent) before suspending.

It seems strange because I did non change anything in menu.lst and hibernate.conf. Any ideas why it does not work any more?

My grub configuration is:

# (1) Arch Linux
title  ArchCK
root   (hd0,1)
kernel /boot/vmlinuz26archck root=/dev/hda2 devfs=nomount ro resume2=file:/dev/hda2:0x10016
initrd /boot/initramfs-2.6.15-archck.img

tomk

Forum Fellow

From: Ireland

Registered: 2004-07-21

Posts: 9,839

Re: suspend2 and the new archck kernel (2.6.15) with initrd

Is there a "Big Fat Warning" in dmesg as well? If so, what does it say, exactly?

I suspend to swap myself, and it's working fine - maybe something different is needed for file suspension.

iphitus

Forum Fellow

From: Melbourne, Australia

Registered: 2004-10-09

Posts: 4,927

Re: suspend2 and the new archck kernel (2.6.15) with initrd

When posting output, dont do a blind grep. Please give a full dmesg.

iphitus

mdv

Member

From: Poland

Registered: 2005-04-09

Posts: 145

Re: suspend2 and the new archck kernel (2.6.15) with initrd

This is the full dmesg output.

Linux version 2.6.15-archck (root@claudius) (gcc version 4.0.3 20051222 (prerelease)) #1 SMP PREEMPT Tue Jan 24 13:17:08 CET 2006
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
 BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000d8000 - 00000000000e0000 (reserved)
 BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000001bf70000 (usable)
 BIOS-e820: 000000001bf70000 - 000000001bf7c000 (ACPI data)
 BIOS-e820: 000000001bf7c000 - 000000001bf80000 (ACPI NVS)
 BIOS-e820: 000000001bf80000 - 000000001c000000 (reserved)
 BIOS-e820: 000000002bf80000 - 000000002c000000 (reserved)
 BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
447MB LOWMEM available.
On node 0 totalpages: 114544
  DMA zone: 4096 pages, LIFO batch:0
  DMA32 zone: 0 pages, LIFO batch:0
  Normal zone: 110448 pages, LIFO batch:31
  HighMem zone: 0 pages, LIFO batch:0
DMI 2.3 present.
ACPI: RSDP (v000 PTLTD                                 ) @ 0x000f6ca0
ACPI: RSDT (v001 PTLTD    RSDT   0x06040000  LTP 0x00000000) @ 0x1bf75e53
ACPI: FADT (v001 ATI    Salmon   0x06040000 ATI  0x000f4240) @ 0x1bf7bf64
ACPI: BOOT (v001 PTLTD  $SBFTBL$ 0x06040000  LTP 0x00000001) @ 0x1bf7bfd8
ACPI: DSDT (v001    ATI MS2_1535 0x06040000 MSFT 0x0100000e) @ 0x00000000
ACPI: PM-Timer IO Port: 0x8008
Allocating PCI resources starting at 30000000 (gap: 2c000000:d3f80000)
Built 1 zonelists
Kernel command line: root=/dev/hda2 devfs=nomount ro resume2=file:/dev/hda2:0x10016
Local APIC disabled by BIOS -- you can enable it with "lapic"
mapped APIC to ffffd000 (01432000)
Initializing CPU#0
PID hash table entries: 2048 (order: 11, 32768 bytes)
Using 3579 PM timer ticks per jiffy
Detected 1993.251 MHz processor.
Using pmtmr for high-res timesource
Console: colour VGA+ 80x25
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 446304k/458176k available (2065k kernel code, 11332k reserved, 748k data, 212k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 3990.05 BogoMIPS (lpj=1995027)
Security Framework v1.0.0 initialized
Capability LSM initialized
Mount-cache hash table entries: 512
CPU: After generic identify, caps: bfebf9ff 00000000 00000000 00000000 00000400 00000000 00000000
CPU: After vendor identify, caps: bfebf9ff 00000000 00000000 00000000 00000400 00000000 00000000
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: Hyper-Threading is disabled
CPU: After all inits, caps: bfebf9ff 00000000 00000000 00000080 00000400 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
mtrr: v2.0 (20020519)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
ACPI: Looking for DSDT in initrd... not found.
ACPI: setting ELCR to 0200 (from 0420)
CPU0: Intel Mobile Intel(R) Pentium(R) 4 - M CPU 2.00GHz stepping 07
SMP motherboard not detected.
Local APIC not detected. Using dummy APIC emulation.
Brought up 1 CPUs
checking if image is initramfs... it is
Freeing initrd memory: 3251k freed
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfd89b, last bus=3
PCI: Using configuration type 1
ACPI: Subsystem revision 20050902
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
PCI quirk: region 8000-803f claimed by ali7101 ACPI
PCI quirk: region 8040-805f claimed by ali7101 SMB
Boot video device is 0000:01:05.0
ACPI: PCI Interrupt Routing Table [_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [_SB_.PCI0.AGPB._PRT]
ACPI: PCI Interrupt Link [LNK0] (IRQs 7 10) *0, disabled.
ACPI: PCI Interrupt Link [LNK1] (IRQs 7 *10)
ACPI: PCI Interrupt Link [LNK2] (IRQs 7 *10)
ACPI: PCI Interrupt Link [LNK3] (IRQs 7 *10)
ACPI: PCI Interrupt Link [LNK4] (IRQs 7 11) *0, disabled.
ACPI: PCI Interrupt Link [LNK5] (IRQs 7 *11)
ACPI: PCI Interrupt Link [LNK6] (IRQs 7 10) *0, disabled.
ACPI: PCI Interrupt Link [LNK7] (IRQs *5)
ACPI: PCI Interrupt Link [LNK8] (IRQs 7 10) *0, disabled.
ACPI: Embedded Controller [EC0] (gpe 24)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 13 devices
SCSI subsystem initialized
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
pnp: 00:06: ioport range 0x40b-0x40b has been reserved
pnp: 00:06: ioport range 0x480-0x48f has been reserved
pnp: 00:06: ioport range 0x4d0-0x4d1 has been reserved
pnp: 00:06: ioport range 0x4d6-0x4d6 has been reserved
pnp: 00:06: ioport range 0x8000-0x807f could not be reserved
PCI: Bridge: 0000:00:01.0
  IO window: 9000-9fff
  MEM window: d0500000-d05fffff
  PREFETCH window: d8000000-dfffffff
PCI: Bus 2, cardbus bridge: 0000:00:0a.0
  IO window: 00001800-000018ff
  IO window: 00001c00-00001cff
  PREFETCH window: 30000000-31ffffff
  MEM window: 32000000-33ffffff
PCI: Bus 6, cardbus bridge: 0000:00:0a.1
  IO window: 00002000-000020ff
  IO window: 00002400-000024ff
  PREFETCH window: 34000000-35ffffff
  MEM window: 36000000-37ffffff
PCI: Enabling device 0000:00:0a.0 (0000 -> 0003)
ACPI: PCI Interrupt Link [LNK5] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LNK5] -> GSI 11 (level, low) -> IRQ 11
PCI: Enabling device 0000:00:0a.1 (0000 -> 0003)
ACPI: PCI Interrupt 0000:00:0a.1[A] -> Link [LNK5] -> GSI 11 (level, low) -> IRQ 11
Simple Boot Flag at 0x37 set to 0x1
apm: BIOS not found.
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
Activating ISA DMA hang workarounds.
vesafb: ATI Technologies Inc., MS2 , 01.00 (OEM: ATI RS200M  )
vesafb: VBE version: 2.0
vesafb: no monitor limits have been set
vesafb: scrolling: redraw
Console: switching to colour frame buffer device 80x30
vesafb: framebuffer at 0xd8000000, mapped to 0xdc880000, using 6144k, total 65472k
fb0: VESA VGA frame buffer device
ACPI: AC Adapter [ACAD] (on-line)
ACPI: Battery Slot [BAT1] (battery absent)
ACPI: Power Button (FF) [PWRF]
ACPI: Power Button (CM) [PWRB]
ACPI: Lid Switch [LID]
ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
ACPI: CPU0 (power states: C1[C1] C2[C2])
ACPI: Processor [CPU0] (supports 8 throttling states)
ACPI: Thermal Zone [THRM] (29 C)
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
PCI: Enabling device 0000:00:08.0 (0000 -> 0003)
ACPI: PCI Interrupt Link [LNK6] enabled at IRQ 10
PCI: setting IRQ 10 as level-triggered
ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [LNK6] -> GSI 10 (level, low) -> IRQ 10
0000:00:08.0: ttyS2 at I/O 0x1428 (irq = 10) is a 8250
0000:00:08.0: ttyS3 at I/O 0x1440 (irq = 10) is a 8250
Couldn't register serial port 0000:00:08.0: -28
floppy0: no floppy controllers found
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
loop: loaded (max 8 devices)
mice: PS/2 mouse device common for all mice
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 5, 196608 bytes)
TCP bind hash table entries: 16384 (order: 5, 196608 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP reno registered
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 10
input: AT Translated Set 2 keyboard as /class/input/input0
lo: Disabled Privacy Extensions
IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
Using IPI No-Shortcut mode
Suspend2 Core.
Suspend2 Compression Driver loading.
Suspend2 Encryption Driver loading.
Suspend2 Swap Writer loading.
Suspend2 FileWriter loading.
ACPI wakeup devices:
PCI0 MDEM  LAN COM1  LID
ACPI: (supports S0 S3 S4 S5)
Freeing unused kernel memory: 212k freed
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ALI15X3: IDE controller at PCI slot 0000:00:10.0
ACPI: PCI Interrupt 0000:00:10.0[A]: no GSI
ALI15X3: chipset revision 196
ALI15X3: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0x2840-0x2847, BIOS settings: hda:DMA, hdb:pio
    ide1: BM-DMA at 0x2848-0x284f, BIOS settings: hdc:DMA, hdd:pio
Probing IDE interface ide0...
hda: IC25N040ATMR04-0, ATA DISK drive
Synaptics Touchpad, model: 1, fw: 5.8, id: 0x2348b3, caps: 0x904713/0x10008
input: SynPS/2 Synaptics TouchPad as /class/input/input1
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: QSI CD-RW/DVD-ROM SBW-241, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
hda: 78140160 sectors (40007 MB) w/1740KiB Cache, CHS=16383/255/63, UDMA(100)
hda: cache flushes supported
 hda: hda1 hda2 hda3 hda4
hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
ide-floppy driver 0.99.newide
Emulex LightPulse Fibre Channel SCSI driver 8.1.0
Copyright(c) 2004-2005 Emulex.  All rights reserved.
QLogic Fibre Channel HBA Driver
seagate: ST0x/TMC-8xx not detected.
st: Version 20050830, fixed bufsize 32768, s/g segs 256
qlogicfas: no cards were found, please specify I/O address and IRQ using iobase= and irq= optionsFailed initialization of WD-7000 SCSI card!
3ware 9000 Storage Controller device driver for Linux v2.26.02.004.
iscsi: registered transport (tcp)
sym53c416.c: Version 1.0.0-ac
scsi: <fdomain> Detection failed (no card)
GDT-HA: Storage RAID Controller Driver. Version: 3.04
GDT-HA: Found 0 PCI Storage RAID Controllers
3ware Storage Controller device driver for Linux v1.26.02.001.
imm: Version 2.05 (for Linux 2.4.0)
ipr: IBM Power RAID SCSI Device Driver version: 2.1.0 (October 31, 2005)
Adaptec aacraid driver (1.1-4 Jan 24 2006 13:06:25)
nsp32: loading...
libata version 1.20 loaded.
osst :I: Tape driver with OnStream support version 0.99.3
osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $
NCR53c406a: no available ports found
megaraid cmm: 2.20.2.6 (Release Date: Mon Mar 7 00:01:03 EST 2005)
megasas: 00.00.02.00-rc4 Fri Sep 16 12:37:08 EDT 2005
megaraid: 2.20.4.6 (Release Date: Mon Mar 07 12:27:22 EST 2005)
Loading Adaptec I2O RAID: Version 2.4 Build 5go
Detecting Adaptec I2O RAID controllers...
Fusion MPT base driver 3.03.04
Copyright (c) 1999-2005 LSI Logic Corporation
Fusion MPT misc device (ioctl) driver 3.03.04
mptctl: Registered with Fusion MPT base driver
mptctl: /dev/mptctl @ (major,minor=10,220)
Fusion MPT SAS Host driver 3.03.04
Fusion MPT SPI Host driver 3.03.04
Fusion MPT FC Host driver 3.03.04
JFS: nTxBlock = 3515, nTxLock = 28120
SGI XFS with ACLs, security attributes, large block numbers, no debug enabled
Suspend2 2.2-rc16: Filewriter: Sorry. No signature found.
Suspend2 2.2-rc16: No matching enabled writer found. Suspending disabled.
Suspend2 2.2-rc16: Missing or invalid storage location (resume2= parameter). Please correct and rerun lilo (or equivalent) before suspending.
ReiserFS: hda2: found reiserfs format "3.6" with standard journal
ReiserFS: hda2: using ordered data mode
ReiserFS: hda2: journal params: device hda2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: hda2: checking transaction log (hda2)
ReiserFS: hda2: Using r5 hash to sort names
Adding 248968k swap on /dev/hda1.  Priority:-1 extents:1 across:248968k
ReiserFS: hda3: found reiserfs format "3.6" with standard journal
ReiserFS: hda3: using ordered data mode
ReiserFS: hda3: journal params: device hda3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: hda3: checking transaction log (hda3)
ReiserFS: hda3: Using r5 hash to sort names
ReiserFS: hda4: found reiserfs format "3.6" with standard journal
ReiserFS: hda4: using ordered data mode
ReiserFS: hda4: journal params: device hda4, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: hda4: checking transaction log (hda4)
ReiserFS: hda4: Using r5 hash to sort names
usbcore: registered new driver usbfs
usbcore: registered new driver hub
usbcore: registered new driver usbserial
drivers/usb/serial/usb-serial.c: USB Serial support registered for generic
usbcore: registered new driver usbserial_generic
drivers/usb/serial/usb-serial.c: USB Serial Driver core
drivers/usb/serial/usb-serial.c: USB Serial support registered for Handspring Visor / Palm OS
drivers/usb/serial/usb-serial.c: USB Serial support registered for Sony Clie 3.5
drivers/usb/serial/usb-serial.c: USB Serial support registered for Sony Clie 5.0
usbcore: registered new driver visor
drivers/usb/serial/visor.c: USB HandSpring Visor / Palm OS driver
natsemi dp8381x driver, version 1.07+LK1.0.17, Sep 27, 2002
  originally by Donald Becker <becker@scyld.com>
  http://www.scyld.com/network/natsemi.html
  2.4.x kernel port by Jeff Garzik, Tjeerd Mulder
ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 10
ACPI: PCI Interrupt 0000:00:12.0[A] -> Link [LNK1] -> GSI 10 (level, low) -> IRQ 10
natsemi eth0: NatSemi DP8381[56] at 0xd0009000 (0000:00:12.0), 00:0b:cd:a7:7b:27, IRQ 10, port TP.
orinoco 0.15rc3 (David Gibson <hermes@gibson.dropbear.id.au>, Pavel Roskin <proski@gnu.org>, et al)
orinoco_pci 0.15rc3 (Pavel Roskin <proski@gnu.org>, David Gibson <hermes@gibson.dropbear.id.au> & Jean Tourrilhes <jt@hpl.hp.com>)
PCI: Enabling device 0000:00:09.0 (0010 -> 0012)
ACPI: PCI Interrupt Link [LNK3] enabled at IRQ 10
ACPI: PCI Interrupt 0000:00:09.0[A] -> Link [LNK3] -> GSI 10 (level, low) -> IRQ 10
orinoco_pci: Detected device 0000:00:09.0, mem:0xd000b000-0xd000bfff, irq 10
eth1: Hardware identity 8013:0000:0001:0000
eth1: Station identity  001f:0009:0001:0004
eth1: Firmware determined as Intersil 1.4.9
eth1: Ad-hoc demo mode supported
eth1: IEEE standard IBSS ad-hoc mode supported
eth1: WEP supported, 104-bit key
eth1: MAC address 00:02:8A:A1:8A:21
eth1: Station name "Prism  I"
eth1: ready
Linux agpgart interface v0.101 (c) Dave Jones
[drm] Initialized drm 1.0.0 20040925
ACPI: PCI Interrupt Link [LNK0] enabled at IRQ 10
ACPI: PCI Interrupt 0000:01:05.0[A] -> Link [LNK0] -> GSI 10 (level, low) -> IRQ 10
[drm] Initialized radeon 1.19.0 20050911 on minor 0:
p4-clockmod: Warning: Pentium 4-M detected. The speedstep-ich or acpi cpufreq modules offer voltage scaling in addition of frequency scaling. You should use either one instead of p4-clockmod, if possible.
p4-clockmod: P4/Xeon(TM) CPU On-Demand Clock Modulation available
CSLIP: code copyright 1989 Regents of the University of California
PPP generic driver version 2.4.2
agpgart: Detected Ati IGP330/340/345/350/M chipset
agpgart: AGP aperture is 64M @ 0xd4000000
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
Real Time Clock Driver v1.12
input: PC Speaker as /class/input/input2
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
lp0: using parport0 (interrupt-driven).
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
PCI: Enabling device 0000:00:06.0 (0005 -> 0007)
ACPI: PCI Interrupt Link [LNK7] enabled at IRQ 5
PCI: setting IRQ 5 as level-triggered
ACPI: PCI Interrupt 0000:00:06.0[A] -> Link [LNK7] -> GSI 5 (level, low) -> IRQ 5
AC'97 1 does not respond - RESET
AC'97 1 access is not valid [0xffffffff], removing mixer.
ali mixer 1 creating error.
NET: Registered protocol family 23
ieee80211_crypt: registered algorithm 'NULL'
hostap_pci: 0.4.4-kernel (Jouni Malinen <jkmaline@cc.hut.fi>)
ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LNK5] -> GSI 11 (level, low) -> IRQ 11
Yenta: CardBus bridge found at 0000:00:0a.0 [103c:002a]
Yenta O2: res at 0x94/0xD4: ea/00
Yenta O2: enabling read prefetch/write burst
Yenta: ISA IRQ mask 0x0018, PCI irq 11
Socket status: 30000006
ACPI: PCI Interrupt 0000:00:0a.1[A] -> Link [LNK5] -> GSI 11 (level, low) -> IRQ 11
Yenta: CardBus bridge found at 0000:00:0a.1 [103c:002a]
Yenta: ISA IRQ mask 0x0018, PCI irq 11
Socket status: 30000006
Initializing USB Mass Storage driver...
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
usbcore: registered new driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
PCI: Enabling device 0000:00:0e.2 (0010 -> 0012)
ACPI: PCI Interrupt Link [LNK4] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:0e.2[C] -> Link [LNK4] -> GSI 11 (level, low) -> IRQ 11
PCI: Via IRQ fixup for 0000:00:0e.2, from 255 to 11
ehci_hcd 0000:00:0e.2: EHCI Host Controller
ehci_hcd 0000:00:0e.2: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:0e.2: irq 11, io mem 0xd0008800
ehci_hcd 0000:00:0e.2: USB 2.0 started, EHCI 0.95, driver 10 Dec 2004
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
USB Universal Host Controller Interface driver v2.3
ACPI: PCI Interrupt Link [LNK2] enabled at IRQ 10
ACPI: PCI Interrupt 0000:00:0e.0[A] -> Link [LNK2] -> GSI 10 (level, low) -> IRQ 10
uhci_hcd 0000:00:0e.0: UHCI Host Controller
uhci_hcd 0000:00:0e.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:0e.0: irq 10, io base 0x00002800
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
usb 1-1: new high speed USB device using ehci_hcd and address 2
ACPI: PCI Interrupt 0000:00:0e.1[B] -> Link [LNK3] -> GSI 10 (level, low) -> IRQ 10
uhci_hcd 0000:00:0e.1: UHCI Host Controller
uhci_hcd 0000:00:0e.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:0e.1: irq 10, io base 0x00002820
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
scsi2 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 2
usb-storage: waiting for device to settle before scanning
ieee1394: Initialized config rom entry `ip1394'
ohci1394: $Rev: 1313 $ Ben Collins <bcollins@debian.org>
PCI: Enabling device 0000:00:0c.0 (0010 -> 0012)
ACPI: PCI Interrupt 0000:00:0c.0[A] -> Link [LNK5] -> GSI 11 (level, low) -> IRQ 11
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[11]  MMIO=[d0008000-d00087ff]  Max Packet=[2048]
eth1394: $Rev: 1312 $ Ben Collins <bcollins@debian.org>
eth1394: eth2: IEEE-1394 IPv4 over 1394 Ethernet (fw-host0)
usb 2-2: new full speed USB device using uhci_hcd and address 2
sbp2: $Rev: 1306 $ Ben Collins <bcollins@debian.org>
ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1)
ieee1394: sbp2: Try serialize_io=0 for better performance
hub 2-2:1.0: USB hub found
hub 2-2:1.0: 4 ports detected
usb 2-2.2: new low speed USB device using uhci_hcd and address 3
input: Logitech USB-PS/2 Optical Mouse as /class/input/input3
input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:0e.0-2.2
usb 2-2.4: new full speed USB device using uhci_hcd and address 4
drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 4 if 0 alt 0 proto 2 vid 0x03F0 pid 0x0904
ieee1394: Host added: ID:BUS[0-00:1023]  GUID[000bcd719fa6006d]
ip_tables: (C) 2000-2002 Netfilter core team
ip_conntrack version 2.4 (3579 buckets, 28632 max) - 212 bytes per conntrack
  Vendor: WDC WD60  Model: 0UE-22HCT0        Rev: 0000
  Type:   Direct-Access                      ANSI SCSI revision: 00
SCSI device sda: 117210240 512-byte hdwr sectors (60012 MB)
sda: assuming drive cache: write through
SCSI device sda: 117210240 512-byte hdwr sectors (60012 MB)
sda: assuming drive cache: write through
 sda: sda1
sd 2:0:0:0: Attached scsi disk sda
sd 2:0:0:0: Attached scsi generic sg0 type 0
usb-storage: device scan complete
eth0: DSPCFG accepted after 0 usec.
eth0: link up.
eth0: Setting full-duplex based on negotiated link capability.
mtrr: 0xd8000000,0x8000000 overlaps existing 0xd8000000,0x4000000
mtrr: 0xd8000000,0x8000000 overlaps existing 0xd8000000,0x4000000
mtrr: 0xd8000000,0x8000000 overlaps existing 0xd8000000,0x4000000
[drm:radeon_cp_init] *ERROR* radeon_cp_init called without lock held
[drm:drm_unlock] *ERROR* Process 2343 using kernel context 0
eth0: no IPv6 routers present

iphitus

Forum Fellow

From: Melbourne, Australia

Registered: 2004-10-09

Posts: 4,927

Re: suspend2 and the new archck kernel (2.6.15) with initrd

where did this dmesg come from? before? after? hand written off kernel boot messages?

iphitus

mdv

Member

From: Poland

Registered: 2005-04-09

Posts: 145

Re: suspend2 and the new archck kernel (2.6.15) with initrd

It was after a # hibernate, and power on again. Now I reverted to 2.6.13, one of the best kernels in my humble opinion.