You are not logged in.

#1 2014-06-18 16:16:49

ritchan
Member
Registered: 2013-10-06
Posts: 13

Trouble starting lm_sensors - broken ACPI somehow?

I'm doing a hardware project that absolutely needs the temperature sensors to work (I'm sure Nocona Xeons at least can report their temperature, right?). I tried to start lm_sensors but it gives me an error :
[ 4615.922564] smsc47m1: Found SMSC LPC47M10x/LPC47M112/LPC47M13x
[ 4615.922588] ACPI Warning: SystemIO range 0x0000000000000804-0x0000000000000804 conflicts with OpRegion 0x0000000000000800-0x000000000000087f (\_SB_.PCI0.LPC_.SIO_.SSWC) (20131218/utaddress-258)
[ 4615.922603] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver

What can I do now? Must I fix the ACPI DSDT and compile a custom kernel? Is the problem elsewhere? Here's my dmesg

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.14.6-1-ARCH (nobody@var-lib-archbuild-testing-x86_64-tobias) (gcc version 4.9.0 20140521 (prerelease) (GCC) ) #1 SMP PREEMPT Sun Jun 8 10:08:38 CEST 2014
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=c1ee7abf-ad86-4d5d-9c66-149ddeb2cc2b rw quiet
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009afff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009b000-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bfeeffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bfef0000-0x00000000bfefafff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000bfefb000-0x00000000bfefffff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000bff00000-0x00000000bff7ffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bff80000-0x00000000bfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fed003ff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000feefffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffb00000-0x00000000ffbfffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.3 present.
[    0.000000] DMI: FUJITSU SIEMENS D1889/D1889, BIOS 4.06  Rev. 1.07.1889             05/22/2006
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] No AGP bridge found
[    0.000000] e820: last_pfn = 0xbff80 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-C7FFF write-protect
[    0.000000]   C8000-DFFFF uncachable
[    0.000000]   E0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F80000000 write-back
[    0.000000]   1 base 080000000 mask FC0000000 write-back
[    0.000000]   2 base 0BFF80000 mask FFFF80000 uncachable
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] found SMP MP-table at [mem 0x000f6c10-0x000f6c1f] mapped at [ffff8800000f6c10]
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [ffff880000095000] 95000 size 24576
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] BRK [0x01b39000, 0x01b39fff] PGTABLE
[    0.000000] BRK [0x01b3a000, 0x01b3afff] PGTABLE
[    0.000000] BRK [0x01b3b000, 0x01b3bfff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0xbfc00000-0xbfdfffff]
[    0.000000]  [mem 0xbfc00000-0xbfdfffff] page 2M
[    0.000000] BRK [0x01b3c000, 0x01b3cfff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0xbc000000-0xbfbfffff]
[    0.000000]  [mem 0xbc000000-0xbfbfffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x80000000-0xbbffffff]
[    0.000000]  [mem 0x80000000-0xbbffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x00100000-0x7fffffff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0x7fffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0xbfe00000-0xbfeeffff]
[    0.000000]  [mem 0xbfe00000-0xbfeeffff] page 4k
[    0.000000] BRK [0x01b3d000, 0x01b3dfff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0xbff00000-0xbff7ffff]
[    0.000000]  [mem 0xbff00000-0xbff7ffff] page 4k
[    0.000000] RAMDISK: [mem 0x379c8000-0x37cdbfff]
[    0.000000] ACPI: RSDP 00000000000f6ba0 000024 (v02 PTLTD )
[    0.000000] ACPI: XSDT 00000000bfef5365 00004C (v01 PTLTD  ? XSDT   06040001  LTP 00000000)
[    0.000000] ACPI: FACP 00000000bfef5425 0000F4 (v03 FSC             06040001      000F4240)
[    0.000000] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Pm1aControlBlock: 16/32 (20131218/tbfadt-603)
[    0.000000] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/PmTimerBlock: 32/24 (20131218/tbfadt-603)
[    0.000000] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 64/32 (20131218/tbfadt-603)
[    0.000000] ACPI BIOS Warning (bug): Invalid length for FADT/Pm1aControlBlock: 32, using default 16 (20131218/tbfadt-684)
[    0.000000] ACPI BIOS Warning (bug): Invalid length for FADT/PmTimerBlock: 24, using default 32 (20131218/tbfadt-684)
[    0.000000] ACPI: DSDT 00000000bfef5519 00597B (v01 FSC    D1649    06040001 MSFT 02000002)
[    0.000000] ACPI: FACS 00000000bfefbfc0 000040
[    0.000000] ACPI: SPCR 00000000bfefae94 000050 (v01 PTLTD  $UCRTBL$ 06040001 PTL  00000001)
[    0.000000] ACPI: MCFG 00000000bfefaee4 000040 (v01 PTLTD    MCFG   06040001  LTP 00000000)
[    0.000000] ACPI: APIC 00000000bfefaf24 0000B4 (v01 PTLTD  ? APIC   06040001  LTP 00000000)
[    0.000000] ACPI: BOOT 00000000bfefafd8 000028 (v01 PTLTD  $SBFTBL$ 06040001  LTP 00000001)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x00000000bff7ffff]
[    0.000000] Initmem setup node 0 [mem 0x00000000-0xbff7ffff]
[    0.000000]   NODE_DATA [mem 0xbff7b000-0xbff7ffff]
[    0.000000]  [ffffea0000000000-ffffea0002ffffff] PMD -> [ffff8800bc400000-ffff8800bf3fffff] on node 0
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x0009afff]
[    0.000000]   node   0: [mem 0x00100000-0xbfeeffff]
[    0.000000]   node   0: [mem 0xbff00000-0xbff7ffff]
[    0.000000] On node 0 totalpages: 786186
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3994 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 12222 pages used for memmap
[    0.000000]   DMA32 zone: 782192 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0xf008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x06] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x07] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: IOAPIC (id[0x03] address[0xfec80000] gsi_base[24])
[    0.000000] IOAPIC[1]: apic_id 3, version 32, address 0xfec80000, GSI 24-47
[    0.000000] ACPI: IOAPIC (id[0x04] address[0xfec80800] gsi_base[48])
[    0.000000] IOAPIC[2]: apic_id 4, version 32, address 0xfec80800, GSI 48-71
[    0.000000] ACPI: IOAPIC (id[0x05] address[0xfec84000] gsi_base[72])
[    0.000000] IOAPIC[3]: apic_id 5, version 32, address 0xfec84000, GSI 72-95
[    0.000000] ACPI: IOAPIC (id[0x08] address[0xfec84800] gsi_base[96])
[    0.000000] IOAPIC[4]: apic_id 8, version 32, address 0xfec84800, GSI 96-119
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 136
[    0.000000] PM: Registered nosave memory: [mem 0x0009b000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xbfef0000-0xbfefafff]
[    0.000000] PM: Registered nosave memory: [mem 0xbfefb000-0xbfefffff]
[    0.000000] e820: [mem 0xc0000000-0xdfffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] PERCPU: Embedded 29 pages/cpu @ffff8800bfa00000 s87040 r8192 d23552 u524288
[    0.000000] pcpu-alloc: s87040 r8192 d23552 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 773879
[    0.000000] Policy zone: DMA32
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=c1ee7abf-ad86-4d5d-9c66-149ddeb2cc2b rw quiet
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 3080100K/3144744K available (5231K kernel code, 858K rwdata, 1632K rodata, 1120K init, 1288K bss, 64644K reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] 	Dump stacks of tasks blocking RCU-preempt GP.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS:8448 nr_irqs:1024 16
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] allocated 12582912 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 2800.289 MHz processor
[    0.006691] Calibrating delay loop (skipped), value calculated using timer frequency.. 5602.93 BogoMIPS (lpj=9334296)
[    0.006698] pid_max: default: 32768 minimum: 301
[    0.006716] ACPI: Core revision 20131218
[    0.012193] ACPI: All ACPI Tables successfully acquired
[    0.013380] Security Framework initialized
[    0.013395] Yama: becoming mindful.
[    0.014111] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.017887] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.019116] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.019133] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.019579] Initializing cgroup subsys memory
[    0.019591] Initializing cgroup subsys devices
[    0.019595] Initializing cgroup subsys freezer
[    0.019598] Initializing cgroup subsys net_cls
[    0.019602] Initializing cgroup subsys blkio
[    0.019653] CPU: Physical Processor ID: 0
[    0.019656] CPU: Processor Core ID: 0
[    0.019660] mce: CPU supports 4 MCE banks
[    0.019676] CPU0: Thermal monitoring enabled (TM1)
[    0.019689] Last level iTLB entries: 4KB 64, 2MB 64, 4MB 64
Last level dTLB entries: 4KB 64, 2MB 0, 4MB 64, 1GB 0
tlb_flushall_shift: 6
[    0.019789] Freeing SMP alternatives memory: 20K (ffffffff819f0000 - ffffffff819f5000)
[    0.021441] ftrace: allocating 20032 entries in 79 pages
[    0.030824] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.066385] smpboot: CPU0: Intel(R) Xeon(TM) CPU 2.80GHz (fam: 0f, model: 04, stepping: 03)
[    0.066666] Performance Events: Netburst events, Netburst P4/Xeon PMU driver.
[    0.066666] ... version:                0
[    0.066666] ... bit width:              40
[    0.066666] ... generic registers:      18
[    0.066666] ... value mask:             000000ffffffffff
[    0.066666] ... max period:             0000007fffffffff
[    0.066666] ... fixed-purpose events:   0
[    0.066666] ... event mask:             000000000003ffff
[    0.083414] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.090117] x86: Booting SMP configuration:
[    0.090121] .... node  #0, CPUs:      #1 #2 #3
[    0.226615] x86: Booted up 1 node, 4 CPUs
[    0.226622] smpboot: Total of 4 processors activated (22409.32 BogoMIPS)
[    0.230130] devtmpfs: initialized
[    0.234761] PM: Registering ACPI NVS region [mem 0xbfefb000-0xbfefffff] (20480 bytes)
[    0.234984] pinctrl core: initialized pinctrl subsystem
[    0.235035] RTC time: 14:13:27, date: 06/18/14
[    0.235108] NET: Registered protocol family 16
[    0.236767] cpuidle: using governor ladder
[    0.236770] cpuidle: using governor menu
[    0.236797] ACPI: bus type PCI registered
[    0.236802] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.236942] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.236945] PCI: Intel Corporation E7520 Memory Controller Hub with MMCONFIG support
[    0.236953] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.264586] PCI: Using configuration type 1 for base access
[    0.265811] bio: create slab <bio-0> at 0
[    0.265811] ACPI: Added _OSI(Module Device)
[    0.265811] ACPI: Added _OSI(Processor Device)
[    0.265811] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.265811] ACPI: Added _OSI(Processor Aggregator Device)
[    0.272375] ACPI: Interpreter enabled
[    0.272395] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131218/hwxface-580)
[    0.272405] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20131218/hwxface-580)
[    0.272426] ACPI: (supports S0 S1 S4 S5)
[    0.272429] ACPI: Using IOAPIC for interrupt routing
[    0.272481] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[    0.272971] ACPI: No dock devices found.
[    0.283013] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.283024] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.283036] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[    0.283150] acpi PNP0A03:00: host bridge window [io  0x0000-0x0cf7] (ignored)
[    0.283155] acpi PNP0A03:00: host bridge window [io  0x0d00-0xffff] (ignored)
[    0.283159] acpi PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[    0.283162] acpi PNP0A03:00: host bridge window [mem 0x000c8000-0x000dffff] (ignored)
[    0.283166] acpi PNP0A03:00: host bridge window [mem 0xc0000000-0xdfffffff] (ignored)
[    0.283170] acpi PNP0A03:00: host bridge window [mem 0xf0000000-0xfebfffff] (ignored)
[    0.283173] acpi PNP0A03:00: host bridge window [mem 0xfed00400-0xfedfffff] (ignored)
[    0.283176] acpi PNP0A03:00: host bridge window [mem 0xfef00000-0xffafffff] (ignored)
[    0.283180] acpi PNP0A03:00: host bridge window [mem 0xffc00000-0xffefffff] (ignored)
[    0.283184] PCI: root bus 00: using default resources
[    0.283424] PCI host bridge to bus 0000:00
[    0.283430] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.283435] pci_bus 0000:00: root bus resource [io  0x0000-0xffff]
[    0.283438] pci_bus 0000:00: root bus resource [mem 0x00000000-0xfffffffff]
[    0.283455] pci 0000:00:00.0: [8086:3590] type 00 class 0x060000
[    0.283642] pci 0000:00:02.0: [8086:3595] type 01 class 0x060400
[    0.283715] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[    0.283770] pci 0000:00:02.0: System wakeup disabled by ACPI
[    0.283866] pci 0000:00:04.0: [8086:3597] type 01 class 0x060400
[    0.283938] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
[    0.283992] pci 0000:00:04.0: System wakeup disabled by ACPI
[    0.284084] pci 0000:00:05.0: [8086:3598] type 01 class 0x060400
[    0.284156] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
[    0.284209] pci 0000:00:05.0: System wakeup disabled by ACPI
[    0.284299] pci 0000:00:06.0: [8086:3599] type 01 class 0x060400
[    0.284370] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
[    0.284424] pci 0000:00:06.0: System wakeup disabled by ACPI
[    0.284537] pci 0000:00:1d.0: [8086:24d2] type 00 class 0x0c0300
[    0.284587] pci 0000:00:1d.0: reg 0x20: [io  0x1000-0x101f]
[    0.284690] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    0.284779] pci 0000:00:1d.1: [8086:24d4] type 00 class 0x0c0300
[    0.284828] pci 0000:00:1d.1: reg 0x20: [io  0x1400-0x141f]
[    0.284925] pci 0000:00:1d.1: System wakeup disabled by ACPI
[    0.285006] pci 0000:00:1d.2: [8086:24d7] type 00 class 0x0c0300
[    0.285055] pci 0000:00:1d.2: reg 0x20: [io  0x1800-0x181f]
[    0.285179] pci 0000:00:1d.3: [8086:24de] type 00 class 0x0c0300
[    0.285228] pci 0000:00:1d.3: reg 0x20: [io  0x1c00-0x1c1f]
[    0.285363] pci 0000:00:1d.7: [8086:24dd] type 00 class 0x0c0320
[    0.285389] pci 0000:00:1d.7: reg 0x10: [mem 0xde100000-0xde1003ff]
[    0.285493] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.285547] pci 0000:00:1d.7: System wakeup disabled by ACPI
[    0.285629] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060400
[    0.285772] pci 0000:00:1f.0: [8086:24d0] type 00 class 0x060100
[    0.285843] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
[    0.285854] pci 0000:00:1f.0: quirk: [io  0xf000-0xf07f] claimed by ICH4 ACPI/GPIO/TCO
[    0.285860] pci 0000:00:1f.0: quirk: [io  0xf180-0xf1bf] claimed by ICH4 GPIO
[    0.285970] pci 0000:00:1f.1: [8086:24db] type 00 class 0x01018a
[    0.285987] pci 0000:00:1f.1: reg 0x10: [io  0x0000-0x0007]
[    0.285999] pci 0000:00:1f.1: reg 0x14: [io  0x0000-0x0003]
[    0.286010] pci 0000:00:1f.1: reg 0x18: [io  0x0000-0x0007]
[    0.286021] pci 0000:00:1f.1: reg 0x1c: [io  0x0000-0x0003]
[    0.286033] pci 0000:00:1f.1: reg 0x20: [io  0x2400-0x240f]
[    0.286044] pci 0000:00:1f.1: reg 0x24: [mem 0x00000000-0x000003ff]
[    0.286173] pci 0000:00:1f.3: [8086:24d3] type 00 class 0x0c0500
[    0.286222] pci 0000:00:1f.3: reg 0x20: [io  0x2000-0x201f]
[    0.286461] pci 0000:01:00.0: [8086:0330] type 01 class 0x060400
[    0.286536] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[    0.286573] pci 0000:01:00.0: System wakeup disabled by ACPI
[    0.286661] pci 0000:01:00.2: [8086:0332] type 01 class 0x060400
[    0.286740] pci 0000:01:00.2: PME# supported from D0 D3hot D3cold
[    0.286782] pci 0000:01:00.2: System wakeup disabled by ACPI
[    0.286863] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.286878] pci 0000:00:02.0: PCI bridge to [bus 01-03]
[    0.286886] pci 0000:00:02.0:   bridge window [mem 0xde200000-0xde2fffff]
[    0.286894] pci 0000:00:02.0:   bridge window [mem 0xde000000-0xde0fffff 64bit pref]
[    0.287000] pci 0000:02:0e.0: [1000:0408] type 00 class 0x010400
[    0.287028] pci 0000:02:0e.0: reg 0x10: [mem 0xde000000-0xde00ffff pref]
[    0.287050] pci 0000:02:0e.0: reg 0x18: [mem 0xde240000-0xde27ffff]
[    0.287089] pci 0000:02:0e.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
[    0.287143] pci 0000:02:0e.0: supports D1
[    0.287237] pci 0000:01:00.0: PCI bridge to [bus 02]
[    0.287247] pci 0000:01:00.0:   bridge window [mem 0xde200000-0xde2fffff]
[    0.287254] pci 0000:01:00.0:   bridge window [mem 0xde000000-0xde0fffff 64bit pref]
[    0.287462] pci 0000:01:00.2: PCI bridge to [bus 03]
[    0.287579] pci 0000:04:00.0: [14e4:1659] type 00 class 0x020000
[    0.287604] pci 0000:04:00.0: reg 0x10: [mem 0xde300000-0xde30ffff 64bit]
[    0.287727] pci 0000:04:00.0: PME# supported from D3hot D3cold
[    0.287821] pci 0000:04:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.287833] pci 0000:00:04.0: PCI bridge to [bus 04]
[    0.287841] pci 0000:00:04.0:   bridge window [mem 0xde300000-0xde3fffff]
[    0.287945] pci 0000:05:00.0: [14e4:1659] type 00 class 0x020000
[    0.287969] pci 0000:05:00.0: reg 0x10: [mem 0xde400000-0xde40ffff 64bit]
[    0.288091] pci 0000:05:00.0: PME# supported from D3hot D3cold
[    0.288183] pci 0000:05:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.288195] pci 0000:00:05.0: PCI bridge to [bus 05]
[    0.288202] pci 0000:00:05.0:   bridge window [mem 0xde400000-0xde4fffff]
[    0.288318] pci 0000:06:00.0: [8086:0329] type 01 class 0x060400
[    0.288342] pci 0000:06:00.0: PXH quirk detected; SHPC device MSI disabled
[    0.288358] pci 0000:06:00.0: reg 0x10: [mem 0xde500000-0xde500fff 64bit]
[    0.288422] pci 0000:06:00.0: PME# supported from D0 D3hot D3cold
[    0.288465] pci 0000:06:00.0: System wakeup disabled by ACPI
[    0.288554] pci 0000:06:00.2: [8086:032a] type 01 class 0x060400
[    0.288576] pci 0000:06:00.2: PXH quirk detected; SHPC device MSI disabled
[    0.288592] pci 0000:06:00.2: reg 0x10: [mem 0xde501000-0xde501fff 64bit]
[    0.288656] pci 0000:06:00.2: PME# supported from D0 D3hot D3cold
[    0.288694] pci 0000:06:00.2: System wakeup disabled by ACPI
[    0.288776] pci 0000:06:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.288789] pci 0000:00:06.0: PCI bridge to [bus 06-08]
[    0.288796] pci 0000:00:06.0:   bridge window [mem 0xde500000-0xde5fffff]
[    0.288982] acpiphp: Slot [4] registered
[    0.289075] pci 0000:06:00.0: PCI bridge to [bus 07]
[    0.289308] acpiphp: Slot [5] registered
[    0.289435] pci 0000:06:00.2: PCI bridge to [bus 08]
[    0.289528] pci 0000:09:05.0: [1002:4752] type 00 class 0x030000
[    0.289548] pci 0000:09:05.0: reg 0x10: [mem 0xdf000000-0xdfffffff]
[    0.289560] pci 0000:09:05.0: reg 0x14: [io  0x3000-0x30ff]
[    0.289572] pci 0000:09:05.0: reg 0x18: [mem 0xde620000-0xde620fff]
[    0.289608] pci 0000:09:05.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
[    0.289640] pci 0000:09:05.0: supports D1 D2
[    0.289752] pci 0000:00:1e.0: PCI bridge to [bus 09] (subtractive decode)
[    0.289760] pci 0000:00:1e.0:   bridge window [io  0x3000-0x3fff]
[    0.289766] pci 0000:00:1e.0:   bridge window [mem 0xde600000-0xdfffffff]
[    0.289772] pci 0000:00:1e.0:   bridge window [io  0x0000-0xffff] (subtractive decode)
[    0.289776] pci 0000:00:1e.0:   bridge window [mem 0x00000000-0xfffffffff] (subtractive decode)
[    0.290045] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[    0.290168] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[    0.290284] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[    0.290398] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[    0.290500] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[    0.290604] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[    0.290707] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[    0.290824] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 *4 5 6 7 9 10 11 12 14 15)
[    0.291396] ACPI: Enabled 2 GPEs in block 00 to 1F
[    0.291534] vgaarb: device added: PCI:0000:09:05.0,decodes=io+mem,owns=io+mem,locks=none
[    0.291534] vgaarb: loaded
[    0.291534] vgaarb: bridge control possible 0000:09:05.0
[    0.291534] PCI: Using ACPI for IRQ routing
[    0.299774] PCI: pci_cache_line_size set to 64 bytes
[    0.299843] e820: reserve RAM buffer [mem 0x0009b000-0x0009ffff]
[    0.299848] e820: reserve RAM buffer [mem 0xbfef0000-0xbfffffff]
[    0.299851] e820: reserve RAM buffer [mem 0xbff80000-0xbfffffff]
[    0.300055] NetLabel: Initializing
[    0.300059] NetLabel:  domain hash size = 128
[    0.300060] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.300082] NetLabel:  unlabeled traffic allowed by default
[    0.300203] hpet clockevent registered
[    0.300208] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.300213] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.300220] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[    0.302253] Switched to clocksource hpet
[    0.313770] pnp: PnP ACPI init
[    0.313816] ACPI: bus type PNP registered
[    0.314347] pnp 00:00: Plug and Play ACPI device, IDs INT0800 (active)
[    0.314502] system 00:01: [io  0x04d0-0x04d1] has been reserved
[    0.314508] system 00:01: [io  0x0ca2-0x0ca3] has been reserved
[    0.314512] system 00:01: [io  0x0ca4-0x0ca5] has been reserved
[    0.314516] system 00:01: [io  0xf000-0xf07f] has been reserved
[    0.314520] system 00:01: [io  0xf100-0xf10f] has been reserved
[    0.314523] system 00:01: [io  0xf180-0xf1bf] has been reserved
[    0.314527] system 00:01: [io  0x0800-0x087f] has been reserved
[    0.314531] system 00:01: [io  0xf820-0xf82f] has been reserved
[    0.314535] system 00:01: [io  0xfe00] has been reserved
[    0.314540] system 00:01: [mem 0xfee00000-0xfeefffff] has been reserved
[    0.314544] system 00:01: [mem 0xfec00000-0xfecfffff] could not be reserved
[    0.314550] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.314575] pnp 00:02: [dma 4]
[    0.314626] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.314720] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.314802] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.314876] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
[    0.314975] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.315443] pnp 00:07: Plug and Play ACPI device, IDs PNP0400 (active)
[    0.315790] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.315859] pnp: PnP ACPI: found 9 devices
[    0.315863] ACPI: bus type PNP unregistered
[    0.325255] pci 0000:00:1e.0: BAR 15: assigned [mem 0xc0000000-0xc00fffff pref]
[    0.325262] pci 0000:00:1f.1: BAR 5: assigned [mem 0xc0100000-0xc01003ff]
[    0.325272] pci 0000:02:0e.0: BAR 6: assigned [mem 0xde020000-0xde03ffff pref]
[    0.325278] pci 0000:01:00.0: PCI bridge to [bus 02]
[    0.325286] pci 0000:01:00.0:   bridge window [mem 0xde200000-0xde2fffff]
[    0.325292] pci 0000:01:00.0:   bridge window [mem 0xde000000-0xde0fffff 64bit pref]
[    0.325299] pci 0000:01:00.2: PCI bridge to [bus 03]
[    0.325311] pci 0000:00:02.0: PCI bridge to [bus 01-03]
[    0.325317] pci 0000:00:02.0:   bridge window [mem 0xde200000-0xde2fffff]
[    0.325323] pci 0000:00:02.0:   bridge window [mem 0xde000000-0xde0fffff 64bit pref]
[    0.325330] pci 0000:00:04.0: PCI bridge to [bus 04]
[    0.325336] pci 0000:00:04.0:   bridge window [mem 0xde300000-0xde3fffff]
[    0.325346] pci 0000:00:05.0: PCI bridge to [bus 05]
[    0.325351] pci 0000:00:05.0:   bridge window [mem 0xde400000-0xde4fffff]
[    0.325361] pci 0000:06:00.0: PCI bridge to [bus 07]
[    0.325372] pci 0000:06:00.2: PCI bridge to [bus 08]
[    0.325383] pci 0000:00:06.0: PCI bridge to [bus 06-08]
[    0.325390] pci 0000:00:06.0:   bridge window [mem 0xde500000-0xde5fffff]
[    0.325401] pci 0000:09:05.0: BAR 6: assigned [mem 0xc0000000-0xc001ffff pref]
[    0.325405] pci 0000:00:1e.0: PCI bridge to [bus 09]
[    0.325409] pci 0000:00:1e.0:   bridge window [io  0x3000-0x3fff]
[    0.325416] pci 0000:00:1e.0:   bridge window [mem 0xde600000-0xdfffffff]
[    0.325422] pci 0000:00:1e.0:   bridge window [mem 0xc0000000-0xc00fffff pref]
[    0.325431] pci_bus 0000:00: resource 4 [io  0x0000-0xffff]
[    0.325434] pci_bus 0000:00: resource 5 [mem 0x00000000-0xfffffffff]
[    0.325438] pci_bus 0000:01: resource 1 [mem 0xde200000-0xde2fffff]
[    0.325442] pci_bus 0000:01: resource 2 [mem 0xde000000-0xde0fffff 64bit pref]
[    0.325445] pci_bus 0000:02: resource 1 [mem 0xde200000-0xde2fffff]
[    0.325449] pci_bus 0000:02: resource 2 [mem 0xde000000-0xde0fffff 64bit pref]
[    0.325453] pci_bus 0000:04: resource 1 [mem 0xde300000-0xde3fffff]
[    0.325456] pci_bus 0000:05: resource 1 [mem 0xde400000-0xde4fffff]
[    0.325460] pci_bus 0000:06: resource 1 [mem 0xde500000-0xde5fffff]
[    0.325464] pci_bus 0000:09: resource 0 [io  0x3000-0x3fff]
[    0.325467] pci_bus 0000:09: resource 1 [mem 0xde600000-0xdfffffff]
[    0.325470] pci_bus 0000:09: resource 2 [mem 0xc0000000-0xc00fffff pref]
[    0.325474] pci_bus 0000:09: resource 4 [io  0x0000-0xffff]
[    0.325477] pci_bus 0000:09: resource 5 [mem 0x00000000-0xfffffffff]
[    0.325528] NET: Registered protocol family 2
[    0.325807] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[    0.326033] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[    0.326292] TCP: Hash tables configured (established 32768 bind 32768)
[    0.326363] TCP: reno registered
[    0.326381] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.326424] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.326544] NET: Registered protocol family 1
[    0.326580] pci_bus 0000:01: writes to ASPM control bits will be ignored
[    0.326587] pci_bus 0000:04: writes to ASPM control bits will be ignored
[    0.326593] pci_bus 0000:05: writes to ASPM control bits will be ignored
[    0.326599] pci_bus 0000:06: writes to ASPM control bits will be ignored
[    0.328476] pci 0000:01:00.0: rerouting interrupts for [8086:0330]
[    0.328485] pci 0000:01:00.2: rerouting interrupts for [8086:0332]
[    0.328499] pci 0000:06:00.0: rerouting interrupts for [8086:0329]
[    0.328504] pci 0000:06:00.2: rerouting interrupts for [8086:032a]
[    0.328513] pci 0000:09:05.0: Boot video device
[    0.328518] PCI: CLS 64 bytes, default 64
[    0.328615] Unpacking initramfs...
[    0.426850] Freeing initrd memory: 3152K (ffff8800379c8000 - ffff880037cdc000)
[    0.426895] Simple Boot Flag at 0x5c set to 0x1
[    0.427178] Scanning for low memory corruption every 60 seconds
[    0.427751] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.444686] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.448004] zbud: loaded
[    0.448253] VFS: Disk quotas dquot_6.5.2
[    0.448344] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.448595] msgmni has been set to 6022
[    0.448705] Key type big_key registered
[    0.448992] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    0.449073] io scheduler noop registered
[    0.449078] io scheduler deadline registered
[    0.449149] io scheduler cfq registered (default)
[    0.450303] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.450337] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.450458] GHES: HEST is not enabled!
[    0.450564] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    0.471105] 00:08: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[    0.471743] Linux agpgart interface v0.103
[    0.471827] rtc_cmos 00:03: RTC can wake from S4
[    0.471993] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    0.472028] rtc_cmos 00:03: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    0.472049] ledtrig-cpu: registered to indicate activity on CPUs
[    0.472296] TCP: cubic registered
[    0.472525] NET: Registered protocol family 10
[    0.472879] NET: Registered protocol family 17
[    0.473428] registered taskstats version 1
[    0.473979]   Magic number: 2:6:233
[    0.474080] rtc_cmos 00:03: setting system clock to 2014-06-18 14:13:27 UTC (1403100807)
[    0.474185] PM: Hibernation image not present or could not be loaded.
[    0.475887] Freeing unused kernel memory: 1120K (ffffffff818d8000 - ffffffff819f0000)
[    0.475891] Write protecting the kernel read-only data: 8192k
[    0.480251] Freeing unused kernel memory: 904K (ffff88000151e000 - ffff880001600000)
[    0.482102] Freeing unused kernel memory: 416K (ffff880001798000 - ffff880001800000)
[    0.495212] random: systemd-tmpfile urandom read with 2 bits of entropy available
[    0.498057] systemd-udevd[59]: starting version 213
[    0.534553] i8042: PNP: PS/2 Controller [PNP0303:KEYB] at 0x60,0x64 irq 1
[    0.534563] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[    0.535401] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.544553] SCSI subsystem initialized
[    0.544949] megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
[    0.545664] megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
[    0.545714] megaraid: probe new device 0x1000:0x0408:0x1734:0x1065: bus 2:slot 14:func 0
[    0.545912] megaraid 0000:02:0e.0: PCI IRQ 38 -> rerouted to legacy IRQ 18
[    0.548745] ACPI: bus type USB registered
[    0.548801] usbcore: registered new interface driver usbfs
[    0.548825] usbcore: registered new interface driver hub
[    0.548958] usbcore: registered new device driver usb
[    0.549974] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.550694] uhci_hcd: USB Universal Host Controller Interface driver
[    0.551130] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    0.551151] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[    0.551171] uhci_hcd 0000:00:1d.0: detected 2 ports
[    0.551234] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00001000
[    0.551836] hub 1-0:1.0: USB hub found
[    0.551861] hub 1-0:1.0: 2 ports detected
[    0.552568] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    0.552589] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[    0.552601] uhci_hcd 0000:00:1d.1: detected 2 ports
[    0.552649] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001400
[    0.552804] ehci-pci: EHCI PCI platform driver
[    0.553161] hub 2-0:1.0: USB hub found
[    0.553185] hub 2-0:1.0: 2 ports detected
[    0.553878] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    0.553897] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[    0.553910] uhci_hcd 0000:00:1d.2: detected 2 ports
[    0.553939] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001800
[    0.554478] hub 3-0:1.0: USB hub found
[    0.554502] hub 3-0:1.0: 2 ports detected
[    0.555186] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    0.555206] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[    0.555227] uhci_hcd 0000:00:1d.3: detected 2 ports
[    0.555257] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001c00
[    0.555766] hub 4-0:1.0: USB hub found
[    0.555789] hub 4-0:1.0: 2 ports detected
[    0.558220] ehci-pci 0000:00:1d.7: EHCI Host Controller
[    0.558243] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 5
[    0.558270] ehci-pci 0000:00:1d.7: debug port 1
[    0.558570] libata version 3.00 loaded.
[    0.562220] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
[    0.562258] ehci-pci 0000:00:1d.7: irq 23, io mem 0xde100000
[    0.563397] megaraid: fw version:[516O] bios version:[H434]
[    0.564080] scsi0 : LSI Logic MegaRAID driver
[    0.564661] scsi[0]: scanning scsi channel 0 [Phy 0] for non-raid devices
[    0.570066] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.570623] hub 5-0:1.0: USB hub found
[    0.570643] hub 5-0:1.0: 8 ports detected
[    0.593546] hub 1-0:1.0: USB hub found
[    0.593566] hub 1-0:1.0: 2 ports detected
[    0.616783] hub 2-0:1.0: USB hub found
[    0.616800] hub 2-0:1.0: 2 ports detected
[    0.640103] hub 3-0:1.0: USB hub found
[    0.640119] hub 3-0:1.0: 2 ports detected
[    0.663451] hub 4-0:1.0: USB hub found
[    0.663467] hub 4-0:1.0: 2 ports detected
[    0.663682] ata_piix 0000:00:1f.1: version 2.13
[    0.666044] scsi1 : ata_piix
[    0.666314] scsi2 : ata_piix
[    0.666443] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x2400 irq 14
[    0.666450] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x2408 irq 15
[    0.826963] ata2.00: ATAPI: HL-DT-STCD-RW/DVD DRIVE GCC-4244N, 1.00, max UDMA/33
[    0.840175] ata2.00: configured for UDMA/33
[    1.319305] scsi 0:0:8:0: Processor         SDR      GEM318P          1    PQ: 0 ANSI: 2
[    1.343392] usb 2-1: new low-speed USB device number 2 using uhci_hcd
[    1.430019] tsc: Refined TSC clocksource calibration: 2800.099 MHz
[    1.540495] hidraw: raw HID events driver (C) Jiri Kosina
[    1.581874] usbcore: registered new interface driver usbhid
[    1.581880] usbhid: USB HID core driver
[    1.582916] input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:1d.1/usb2/2-1/2-1:1.0/0003:046D:C31C.0001/input/input1
[    1.583047] hid-generic 0003:046D:C31C.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-0000:00:1d.1-1/input0
[    1.596662] input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:1d.1/usb2/2-1/2-1:1.1/0003:046D:C31C.0002/input/input2
[    1.596801] hid-generic 0003:046D:C31C.0002: input,hidraw1: USB HID v1.10 Device [Logitech USB Keyboard] on usb-0000:00:1d.1-1/input1
[    1.763386] usb 2-2: new low-speed USB device number 3 using uhci_hcd
[    1.953959] input: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:1d.1/usb2/2-2/2-2:1.0/0003:045E:0039.0003/input/input3
[    1.954061] hid-generic 0003:045E:0039.0003: input,hidraw2: USB HID v1.10 Mouse [Microsoft Microsoft 5-Button Mouse with IntelliEye(TM)] on usb-0000:00:1d.1-2/input0
[    2.430128] Switched to clocksource tsc
[    3.073026] scsi[0]: scanning scsi channel 1 [Phy 1] for non-raid devices
[    3.556721] floppy0: no floppy controllers found
[    6.827929] scsi[0]: scanning scsi channel 2 [virtual] for logical drives
[    6.828103] scsi 0:2:0:0: Direct-Access     MegaRAID LD 0 RAID5  138G 516O PQ: 0 ANSI: 2
[    6.828373] scsi 0:2:1:0: Direct-Access     MegaRAID LD 1 RAID0  139G 516O PQ: 0 ANSI: 2
[    6.837458] scsi 2:0:0:0: CD-ROM            HL-DT-ST RW/DVD GCC-4244N 1.00 PQ: 0 ANSI: 5
[    6.845749] sd 0:2:0:0: [sda] 284262400 512-byte logical blocks: (145 GB/135 GiB)
[    6.845795] sd 0:2:0:0: [sda] Write Protect is off
[    6.845804] sd 0:2:0:0: [sda] Mode Sense: 00 00 00 00
[    6.845823] sd 0:2:1:0: [sdb] 286310400 512-byte logical blocks: (146 GB/136 GiB)
[    6.845840] sd 0:2:0:0: [sda] Asking for cache data failed
[    6.845867] sd 0:2:1:0: [sdb] Write Protect is off
[    6.845870] sd 0:2:1:0: [sdb] Mode Sense: 00 00 00 00
[    6.845902] sd 0:2:0:0: [sda] Assuming drive cache: write through
[    6.845904] sd 0:2:1:0: [sdb] Asking for cache data failed
[    6.845908] sd 0:2:1:0: [sdb] Assuming drive cache: write through
[    6.846629] sd 0:2:0:0: [sda] Asking for cache data failed
[    6.846695] sd 0:2:1:0: [sdb] Asking for cache data failed
[    6.846700] sd 0:2:0:0: [sda] Assuming drive cache: write through
[    6.846808] sd 0:2:1:0: [sdb] Assuming drive cache: write through
[    6.847202]  sda: sda1
[    6.847661] sd 0:2:0:0: [sda] Asking for cache data failed
[    6.847710] sd 0:2:0:0: [sda] Assuming drive cache: write through
[    6.847757] sd 0:2:0:0: [sda] Attached SCSI disk
[    6.857584] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[    6.857589] cdrom: Uniform CD-ROM driver Revision: 3.20
[    6.858016] sr 2:0:0:0: Attached scsi CD-ROM sr0
[    6.864239]  sdb: sdb1 sdb2
[    6.864820] sd 0:2:1:0: [sdb] Asking for cache data failed
[    6.864871] sd 0:2:1:0: [sdb] Assuming drive cache: write through
[    6.864919] sd 0:2:1:0: [sdb] Attached SCSI disk
[    7.161855] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    7.459809] systemd[1]: systemd 213 running in system mode. (+PAM -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ +SECCOMP -APPARMOR)
[    7.460132] systemd[1]: Detected architecture 'x86-64'.
[    7.467447] systemd[1]: Set hostname to <oldp4server-1>.
[    7.877258] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
[    7.877862] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[    7.877966] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    7.877989] systemd[1]: Expecting device sys-subsystem-net-devices-enp4s0.device...
[    7.878013] systemd[1]: Starting Remote File Systems.
[    7.878033] systemd[1]: Reached target Remote File Systems.
[    7.878060] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[    7.878119] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    7.878138] systemd[1]: Starting Paths.
[    7.878157] systemd[1]: Reached target Paths.
[    7.878178] systemd[1]: Starting Encrypted Volumes.
[    7.878197] systemd[1]: Reached target Encrypted Volumes.
[    7.878234] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[    7.878391] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    7.878416] systemd[1]: Expecting device dev-sdb2.device...
[    7.878437] systemd[1]: Starting Root Slice.
[    7.892090] systemd[1]: Created slice Root Slice.
[    7.892115] systemd[1]: Starting User and Session Slice.
[    7.892449] systemd[1]: Created slice User and Session Slice.
[    7.892470] systemd[1]: Starting Device-mapper event daemon FIFOs.
[    7.892537] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[    7.892557] systemd[1]: Starting Delayed Shutdown Socket.
[    7.892602] systemd[1]: Listening on Delayed Shutdown Socket.
[    7.892622] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[    7.892661] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    7.892687] systemd[1]: Starting udev Kernel Socket.
[    7.892723] systemd[1]: Listening on udev Kernel Socket.
[    7.892747] systemd[1]: Starting udev Control Socket.
[    7.892785] systemd[1]: Listening on udev Control Socket.
[    7.892805] systemd[1]: Starting LVM2 metadata daemon socket.
[    7.892851] systemd[1]: Listening on LVM2 metadata daemon socket.
[    7.892874] systemd[1]: Starting Journal Socket.
[    7.892960] systemd[1]: Listening on Journal Socket.
[    7.892992] systemd[1]: Starting System Slice.
[    7.893325] systemd[1]: Created slice System Slice.
[    7.893376] systemd[1]: Started File System Check on Root Device.
[    7.893394] systemd[1]: Mounting Temporary Directory...
[    7.903916] systemd[1]: Starting system-dhcpcd.slice.
[    7.904307] systemd[1]: Created slice system-dhcpcd.slice.
[    7.904330] systemd[1]: Starting system-getty.slice.
[    7.904680] systemd[1]: Created slice system-getty.slice.
[    7.904732] systemd[1]: Mounting POSIX Message Queue File System...
[    7.905464] systemd[1]: Mounting Debug File System...
[    7.919306] systemd[1]: Started Set Up Additional Binary Formats.
[    7.919374] systemd[1]: Mounting Huge Pages File System...
[    7.920228] systemd[1]: Starting Setup Virtual Console...
[    7.921131] systemd[1]: Starting udev Coldplug all Devices...
[    7.927210] systemd[1]: Starting Apply Kernel Variables...
[    7.928738] systemd[1]: Started Load Kernel Modules.
[    7.928808] systemd[1]: Mounting Configuration File System...
[    7.929610] systemd[1]: Mounted FUSE Control File System.
[    7.931800] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[    7.932627] systemd[1]: Starting Journal Service...
[    7.933558] systemd[1]: Started Journal Service.
[    8.173207] EXT4-fs (sda1): re-mounted. Opts: data=ordered
[    8.182934] random: nonblocking pool is initialized
[    8.255179] systemd-udevd[156]: starting version 213
[    8.284504] systemd-journald[136]: Received request to flush runtime journal from PID 1
[    9.162061] shpchp 0000:06:00.0: HPC vendor_id 8086 device_id 329 ss_vid 0 ss_did 0
[    9.162390] shpchp 0000:06:00.0: Can't get msi for the hotplug controller
[    9.162397] shpchp 0000:06:00.0: Use INTx for the hotplug controller
[    9.163681] shpchp 0000:06:00.0: pci_hp_register failed with error -16
[    9.163748] shpchp 0000:06:00.0: Slot initialization failed
[    9.163934] shpchp 0000:06:00.2: HPC vendor_id 8086 device_id 32a ss_vid 0 ss_did 0
[    9.164236] shpchp 0000:06:00.2: Can't get msi for the hotplug controller
[    9.164242] shpchp 0000:06:00.2: Use INTx for the hotplug controller
[    9.164310] shpchp 0000:06:00.2: pci_hp_register failed with error -16
[    9.164368] shpchp 0000:06:00.2: Slot initialization failed
[    9.164481] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    9.195865] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4
[    9.195880] ACPI: Power Button [PWRB]
[    9.196109] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[    9.196117] ACPI: Power Button [PWRF]
[    9.205930] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
[    9.222964] EDAC MC: Ver: 3.0.0
[    9.228303] parport_pc 00:07: reported by Plug and Play ACPI
[    9.228337] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
[    9.256367] Contact your BIOS vendor to see if the E752x error registers can be safely un-hidden
[    9.269841] intel_rng: FWH not detected
[    9.277456] input: PC Speaker as /devices/platform/pcspkr/input/input6
[    9.290666] ACPI Warning: SystemIO range 0x000000000000f180-0x000000000000f1af conflicts with OpRegion 0x000000000000f19b-0x000000000000f19b (\_SB_.PCI0.LPC_.LEDB) (20131218/utaddress-258)
[    9.290727] ACPI Warning: SystemIO range 0x000000000000f180-0x000000000000f1af conflicts with OpRegion 0x000000000000f19a-0x000000000000f19a (\_SB_.PCI0.LPC_.LEDC) (20131218/utaddress-258)
[    9.290739] ACPI Warning: SystemIO range 0x000000000000f180-0x000000000000f1af conflicts with OpRegion 0x000000000000f18f-0x000000000000f18f (\_SB_.PCI0.LPC_.LEDE) (20131218/utaddress-258)
[    9.290749] ACPI Warning: SystemIO range 0x000000000000f180-0x000000000000f1af conflicts with OpRegion 0x000000000000f18e-0x000000000000f18e (\_SB_.PCI0.LPC_.SLPL) (20131218/utaddress-258)
[    9.290759] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    9.291940] microcode: CPU0 sig=0xf43, pf=0x1, revision=0x5
[    9.299821] microcode: CPU1 sig=0xf43, pf=0x1, revision=0x5
[    9.299857] microcode: CPU2 sig=0xf43, pf=0x1, revision=0x5
[    9.299896] microcode: CPU3 sig=0xf43, pf=0x1, revision=0x5
[    9.300056] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    9.327802] pps_core: LinuxPPS API ver. 1 registered
[    9.327811] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    9.329015] PTP clock support registered
[    9.360329] ppdev: user-space parallel port driver
[    9.379148] xor: measuring software checksum speed
[    9.410033]    prefetch64-sse:  3732.000 MB/sec
[    9.424652] iTCO_vendor_support: vendor-support=0
[    9.425495] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
[    9.425547] iTCO_wdt: Found a ICH5 or ICH5R TCO device (Version=1, TCOBASE=0xf060)
[    9.425793] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    9.438928] tg3.c:v3.136 (Jan 03, 2014)
[    9.443354]    generic_sse:  3652.800 MB/sec
[    9.443361] xor: using function: prefetch64-sse (3732.000 MB/sec)
[    9.448681] Adding 1596412k swap on /dev/sdb2.  Priority:-1 extents:1 across:1596412k FS
[    9.462378] tg3 0000:04:00.0 eth0: Tigon3 [partno(BCM95721) rev 4101] (PCI Express) MAC address 00:30:05:ac:d0:3a
[    9.462390] tg3 0000:04:00.0 eth0: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
[    9.462398] tg3 0000:04:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[1]
[    9.462406] tg3 0000:04:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[    9.516946] tg3 0000:05:00.0 eth1: Tigon3 [partno(BCM95721) rev 4101] (PCI Express) MAC address 00:30:05:ae:f3:3f
[    9.516957] tg3 0000:05:00.0 eth1: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
[    9.516964] tg3 0000:05:00.0 eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[    9.516970] tg3 0000:05:00.0 eth1: dma_rwctrl[76180000] dma_mask[64-bit]
[    9.530017] raid6: sse2x1    1877 MB/s
[    9.586685] raid6: sse2x2    2984 MB/s
[    9.595834] mousedev: PS/2 mouse device common for all mice
[    9.616884] systemd-udevd[164]: renamed network interface eth0 to enp4s0
[    9.633550] systemd-udevd[165]: renamed network interface eth1 to enp5s0
[    9.643365] raid6: sse2x4    2766 MB/s
[    9.643371] raid6: using algorithm sse2x2 (2984 MB/s)
[    9.643375] raid6: using intx1 recovery algorithm
[    9.742388] bio: create slab <bio-1> at 1
[    9.749649] Btrfs loaded
[    9.750840] BTRFS: device fsid d6c1b359-6ed3-429d-a667-3506b1f95e83 devid 1 transid 4 /dev/sdb1
[    9.798908] IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
[   12.078746] tg3 0000:04:00.0 enp4s0: Link is up at 1000 Mbps, full duplex
[   12.078767] tg3 0000:04:00.0 enp4s0: Flow control is on for TX and on for RX
[   12.078799] IPv6: ADDRCONF(NETDEV_CHANGE): enp4s0: link becomes ready
[   12.236723] floppy0: no floppy controllers found
[  170.843424] usb 2-1: USB disconnect, device number 2
[  171.116753] usb 2-2: USB disconnect, device number 3
[ 4579.809578] usb 2-1: new low-speed USB device number 4 using uhci_hcd
[ 4580.012329] input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:1d.1/usb2/2-1/2-1:1.0/0003:046D:C31C.0004/input/input7
[ 4580.012609] hid-generic 0003:046D:C31C.0004: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-0000:00:1d.1-1/input0
[ 4580.060885] input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:1d.1/usb2/2-1/2-1:1.1/0003:046D:C31C.0005/input/input8
[ 4580.061115] hid-generic 0003:046D:C31C.0005: input,hidraw1: USB HID v1.10 Device [Logitech USB Keyboard] on usb-0000:00:1d.1-1/input1
[ 4614.311546] i2c /dev entries driver
[ 4615.922564] smsc47m1: Found SMSC LPC47M10x/LPC47M112/LPC47M13x
[ 4615.922588] ACPI Warning: SystemIO range 0x0000000000000804-0x0000000000000804 conflicts with OpRegion 0x0000000000000800-0x000000000000087f (\_SB_.PCI0.LPC_.SIO_.SSWC) (20131218/utaddress-258)
[ 4615.922603] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver

Offline

#2 2014-06-18 16:22:00

ritchan
Member
Registered: 2013-10-06
Posts: 13

Re: Trouble starting lm_sensors - broken ACPI somehow?

I decompiled the DSDT (lesson: avoid Fujitsu Primergy RX300S2!)  and I found some things which might have to do with the SuperIO chip:

[root@oldp4server-1 ~]# iasl -tc -vr dsdt-old.dsl

Intel ACPI Component Architecture
ASL Optimizing Compiler version 20140424-64 [May  4 2014]
Copyright (c) 2000 - 2014 Intel Corporation

dsdt-old.dsl    118:     Method (\_WAK, 1, NotSerialized)  
Warning  3107 -                     ^ Reserved method must return a value (Integer/Package required for _WAK)

dsdt-old.dsl    378:                     0x00000000,         
Error    6043 -                                  ^ Invalid combination of Length and Min/Max fixed flags

dsdt-old.dsl   5711:                             CreateByteField (BUFF, \_SB.PCI0.LPC.SIO.LPT._CRS._Y09._MIN, AD1L)  
Warning  3128 -                                                             ResourceTag larger than Field ^  (Size mismatch, Tag: 16 bits, Field: 8 bits)

dsdt-old.dsl   5713:                             CreateByteField (BUFF, \_SB.PCI0.LPC.SIO.LPT._CRS._Y09._MAX, AD2L)  
Warning  3128 -                                                             ResourceTag larger than Field ^  (Size mismatch, Tag: 16 bits, Field: 8 bits)

dsdt-old.dsl   5887:                             CreateByteField (BUFF, \_SB.PCI0.LPC.SIO.ECP._CRS._Y0B._MIN, AD1L)  
Warning  3128 -                                                             ResourceTag larger than Field ^  (Size mismatch, Tag: 16 bits, Field: 8 bits)

dsdt-old.dsl   5889:                             CreateByteField (BUFF, \_SB.PCI0.LPC.SIO.ECP._CRS._Y0B._MAX, AD2L)  
Warning  3128 -                                                             ResourceTag larger than Field ^  (Size mismatch, Tag: 16 bits, Field: 8 bits)

dsdt-old.dsl   5891:                             CreateByteField (BUFF, \_SB.PCI0.LPC.SIO.ECP._CRS._Y0C._MIN, A41L)  
Warning  3128 -                                                             ResourceTag larger than Field ^  (Size mismatch, Tag: 16 bits, Field: 8 bits)

dsdt-old.dsl   5893:                             CreateByteField (BUFF, \_SB.PCI0.LPC.SIO.ECP._CRS._Y0C._MAX, A42L)  
Warning  3128 -                                                             ResourceTag larger than Field ^  (Size mismatch, Tag: 16 bits, Field: 8 bits)

dsdt-old.dsl   6045:                             CreateByteField (BUFF, \_SB.PCI0.LPC.SIO.COM2._CRS._Y0F._MIN, AD1L)  
Warning  3128 -                                                              ResourceTag larger than Field ^  (Size mismatch, Tag: 16 bits, Field: 8 bits)

dsdt-old.dsl   6047:                             CreateByteField (BUFF, \_SB.PCI0.LPC.SIO.COM2._CRS._Y0F._MAX, AD2L)  
Warning  3128 -                                                              ResourceTag larger than Field ^  (Size mismatch, Tag: 16 bits, Field: 8 bits)

dsdt-old.dsl   6234:                             CreateByteField (BUFF, \_SB.PCI0.LPC.SIO2.COM1._CRS._Y11._MIN, AD1L)  
Warning  3128 -                                                               ResourceTag larger than Field ^  (Size mismatch, Tag: 16 bits, Field: 8 bits)

dsdt-old.dsl   6236:                             CreateByteField (BUFF, \_SB.PCI0.LPC.SIO2.COM1._CRS._Y11._MAX, AD2L)  
Warning  3128 -                                                               ResourceTag larger than Field ^  (Size mismatch, Tag: 16 bits, Field: 8 bits)

ASL Input:     dsdt-old.dsl - 6323 lines, 232387 bytes, 2689 keywords
Hex Dump:      dsdt-old.hex - 205597 bytes

Compilation complete. 1 Errors, 11 Warnings, 57 Remarks, 589 Optimizations

I changed the relevant lines from CreateByteField to CreateWordField. I hope I'm not going to break something horribly

Offline

Board footer

Powered by FluxBB