You are not logged in.

#1 2006-01-28 16:12:29

Registered: 2004-09-01
Posts: 62

proliant install help

I've got Arch installed on my Compaq proliant with a smart 2e raid array containing 3 x 9Gb drives setup as mirors and the 3rd drive the spare.

Arch installed fine and i told grub to install on partition 1 which is my /boot

I rebooted but i get kernel panics saying unknown device hd(0,0)  or root=/dev/discs/disc0/part2 is wrong ?

Menu.lst says

root hd(0,1)        --- grub set this up and ive tried hd(0,0)
kernel (0,0)/vmlinuz26 root=/dev/discs/disc0/part2 ro

Oh forgot to say i can only get the 0.6 Arch installer to detect my array after loading my cpqarray module.

My drive is partitioned as follows

/         =      part2
/boot  =      part1
swap   =      part5

Dont tell me the 0.6 arch-scsi kernel does not have the cpqarray driver compiled in.

Can someone please help me out as im desperate to have Arch on my server.


Board footer

Powered by FluxBB