Arch Linux

Tromzy

Member

Registered: 2015-02-15

Posts: 166

Re: KF 5 & Plasma

You can see the few bugs I have on Plasma 56 beta in the dedicated thread.

gee

Member

Registered: 2006-11-29

Posts: 313

Re: KF 5 & Plasma

Hello,

for the past few months, whenever Plasma gets an upgrade, I cannot easily reboot/logout anymore.
I think clicking on the button does work, but it takes like 5 minutes or more to have an effect, so I usually just restart from the terminal which is not clean.

qdbus org.kde.ksmserver /KSMServer logout 0 0 0

times out or cannot find the path, so not helpful.

After the reboot it's fine, but only till the next upgrade....
What can I do to fix this?

Chawoosh

Member

From: Russia, Siberia, Tomsk

Registered: 2013-05-11

Posts: 40

Re: KF 5 & Plasma

Hi!

I have trouble with on one of my comps, where is old installation of Arch. After standard upgrade:

systemctl isolate multi-user.target
systemctl disable kdm
pacman -Rc kdebase-workspace
pacman -S plasma
pacman -S breeze-kde4
systemctl enable sddm

comp can't poweroff or reboot from plasma - it return to the login screen. There is some not deinstalled from plasma 4, I think, but can't find what.
Where to see?

pzogal

Member

Registered: 2016-03-06

Posts: 1

Re: KF 5 & Plasma

Hi there,

I wonder if someone has a similar problem. I run a rather fresh install (this weekend), kernel 4.4.3-1, plasma 5.5.5. When I installed plasma I had impression it takes too long compared with initial start. So I took a peek at journalctl -e . And what I saw the system was to some extend busy generating some core dumps. Usually kactivitymanage and kalarm crash, sometimes other processes, too. The DE runs ok, and you don't see anything suspicious but I suppose those crashes shouldn't happen. Any idea how to resolve this ?

cheers,
Pawel

here is some log output:

Mar 07 22:03:05 arch-home kdeinit5[656]: QDBusAbstractAdaptor: Cannot relay signal KDEDModule::moduleDeleted(KDEDModule*): Pointers are not supported: KDEDModule*
Mar 07 22:03:05 arch-home kdeinit5[656]: QDBusAbstractAdaptor: Cannot relay signal KDEDModule::moduleDeleted(KDEDModule*): Pointers are not supported: KDEDModule*
Mar 07 22:03:05 arch-home kactivitymanagerd[731]: The X11 connection broke (error 1). Did the X11 server die?
Mar 07 22:03:05 arch-home kernel: kactivitymanage[731]: segfault at 7f5ef8740cd0 ip 00007f5ee416b261 sp 00007ffdb36713b8 error 4 in libQt5Sql.so.5.5.1[7f5ee4157000+3f000]
Mar 07 22:03:05 arch-home kactivitymanagerd[731]: Closing SQL connection:  "kactivities_db_resources_140045870737408_readwrite"
Mar 07 22:03:05 arch-home kdeinit5[656]: The X11 connection broke: I/O error (code 1)
Mar 07 22:03:05 arch-home kscreen_backend_launcher[777]: The X11 connection broke (error 1). Did the X11 server die?
Mar 07 22:03:05 arch-home systemd[1]: Started Process Core Dump (PID 1284/UID 0).
Mar 07 22:03:05 arch-home systemd-coredump[1285]: Process 731 (kactivitymanage) of user 1000 dumped core.
                                                  
                                                  Stack trace of thread 731:
                                                  #0  0x00007f5ee416b261 _ZN12QSqlDatabase5closeEv (libQt5Sql.so.5)
                                                  #1  0x00007f5ee416c7c9 _ZN12QSqlDatabaseD1Ev (libQt5Sql.so.5)
                                                  #2  0x00007f5ee416e7fd n/a (libQt5Sql.so.5)
                                                  #3  0x00007f5ef6d290c9 _ZN9QHashData11free_helperEPFvPNS_4NodeEE (libQt5Core.so.5)
                                                  #4  0x00007f5ee416af33 n/a (libQt5Sql.so.5)
                                                  #5  0x00007f5ef6532c38 __run_exit_handlers (libc.so.6)
                                                  #6  0x00007f5ef6532c85 exit (libc.so.6)
                                                  #7  0x00007f5eed1c8b7e _ZN14QXcbConnection16processXcbEventsEv (libQt5XcbQpa.so.5)
                                                  #8  0x00007f5ef6ed5fd1 _ZN7QObject5eventEP6QEvent (libQt5Core.so.5)
                                                  #9  0x00007f5ef7750fcc _ZN19QApplicationPrivate13notify_helperEP7QObjectP6QEvent (libQt5Widgets.so.5)
                                                  #10 0x00007f5ef77564a6 _ZN12QApplication6notifyEP7QObjectP6QEvent (libQt5Widgets.so.5)
                                                  #11 0x00007f5ef6ea69ab _ZN16QCoreApplication14notifyInternalEP7QObjectP6QEvent (libQt5Core.so.5)
                                                  #12 0x00007f5ef6ea8da6 _ZN23QCoreApplicationPrivate16sendPostedEventsEP7QObjectiP11QThreadData (libQt5Core.so.5)
                                                  #13 0x00007f5ef6efcf33 n/a (libQt5Core.so.5)
                                                  #14 0x00007f5ef5118d87 g_main_context_dispatch (libglib-2.0.so.0)
                                                  #15 0x00007f5ef5118fe0 n/a (libglib-2.0.so.0)
                                                  #16 0x00007f5ef511908c g_main_context_iteration (libglib-2.0.so.0)
                                                  #17 0x00007f5ef6efd33f _ZN20QEventDispatcherGlib13processEventsE6QFlagsIN10QEventLoop17ProcessEventsFlagEE (libQt5Core.so.5)
                                                  #18 0x00007f5ef6ea437a _ZN10QEventLoop4execE6QFlagsINS_17ProcessEventsFlagEE (libQt5Core.so.5)
                                                  #19 0x00007f5ef6eac33c _ZN16QCoreApplication4execEv (libQt5Core.so.5)
                                                  #20 0x0000000000410aa4 main (kactivitymanagerd)
                                                  #21 0x00007f5ef651d710 __libc_start_main (libc.so.6)
                                                  #22 0x0000000000410c79 _start (kactivitymanagerd)
                                                  
                                                  Stack trace of thread 746:
                                                  #0  0x00007f5ef65dbc3d poll (libc.so.6)
                                                  #1  0x00007f5ef5118f7c n/a (libglib-2.0.so.0)
                                                  #2  0x00007f5ef511908c g_main_context_iteration (libglib-2.0.so.0)
                                                  #3  0x00007f5ef6efd33f _ZN20QEventDispatcherGlib13processEventsE6QFlagsIN10QEventLoop17ProcessEventsFlagEE (libQt5Core.so.5)
                                                  #4  0x00007f5ef6ea437a _ZN10QEventLoop4execE6QFlagsINS_17ProcessEventsFlagEE (libQt5Core.so.5)
                                                  #5  0x00007f5ef6cc09f4 _ZN7QThread4execEv (libQt5Core.so.5)
                                                  #6  0x0000000000412daa _ZZ12runInQThreadI9ResourcesEPT_vEN6Thread3runEv (kactivitymanagerd)
                                                  #7  0x00007f5ef6cc59ae n/a (libQt5Core.so.5)
                                                  #8  0x00007f5ef5636424 start_thread (libpthread.so.0)
                                                  #9  0x00007f5ef65e4cbd __clone (libc.so.6)
                                                  
                                                  Stack trace of thread 771:
                                                  #0  0x00007f5ef65dbc3d poll (libc.so.6)
                                                  #1  0x00007f5ef5118f7c n/a (libglib-2.0.so.0)
                                                  #2  0x00007f5ef511908c g_main_context_iteration (libglib-2.0.so.0)
                                                  #3  0x00007f5ef6efd33f _ZN20QEventDispatcherGlib13processEventsE6QFlagsIN10QEventLoop17ProcessEventsFlagEE (libQt5Core.so.5)
                                                  #4  0x00007f5ef6ea437a _ZN10QEventLoop4execE6QFlagsINS_17ProcessEventsFlagEE (libQt5Core.so.5)
                                                  #5  0x00007f5ef6cc09f4 _ZN7QThread4execEv (libQt5Core.so.5)
                                                  #6  0x0000000000412dda _ZZ12runInQThreadI10ActivitiesEPT_vEN6Thread3runEv (kactivitymanagerd)
                                                  #7  0x00007f5ef6cc59ae n/a (libQt5Core.so.5)
                                                  #8  0x00007f5ef5636424 start_thread (libpthread.so.0)
                                                  #9  0x00007f5ef65e4cbd __clone (libc.so.6)
                                                  
                                                  Stack trace of thread 772:
                                                  #0  0x00007f5ef65dbc3d poll (libc.so.6)
                                                  #1  0x00007f5ef5118f7c n/a (libglib-2.0.so.0)
                                                  #2  0x00007f5ef511908c g_main_context_iteration (libglib-2.0.so.0)
                                                  #3  0x00007f5ef6efd35b _ZN20QEventDispatcherGlib13processEventsE6QFlagsIN10QEventLoop17ProcessEventsFlagEE (libQt5Core.so.5)
                                                  #4  0x00007f5ef6ea437a _ZN10QEventLoop4execE6QFlagsINS_17ProcessEventsFlagEE (libQt5Core.so.5)
                                                  #5  0x00007f5ef6cc09f4 _ZN7QThread4execEv (libQt5Core.so.5)
                                                  #6  0x0000000000412e0a _ZZ12runInQThreadI8FeaturesEPT_vEN6Thread3runEv (kactivitymanagerd)
                                                  #7  0x00007f5ef6cc59ae n/a (libQt5Core.so.5)
                                                  #8  0x00007f5ef5636424 start_thread (libpthread.so.0)
                                                  #9  0x00007f5ef65e4cbd __clone (libc.so.6)
Mar 07 22:03:06 arch-home drkonqi[1303]: QXcbConnection: Could not connect to display :0
Mar 07 22:03:06 arch-home kdeinit5[1307]: QXcbConnection: Could not connect to display :0
Mar 07 22:03:06 arch-home systemd[1]: Started Process Core Dump (PID 1305/UID 0).
Mar 07 22:03:06 arch-home systemd[1]: Started Process Core Dump (PID 1308/UID 0).
Mar 07 22:03:06 arch-home systemd-coredump[1310]: Process 1307 (klauncher) of user 1000 dumped core.
                                                  
                                                  Stack trace of thread 1307:
                                                  #0  0x00007fab4e7862a8 raise (libc.so.6)
                                                  #1  0x00007fab4e78772a abort (libc.so.6)
                                                  #2  0x00007fab4eb86ff1 _ZNK14QMessageLogger5fatalEPKcz (libQt5Core.so.5)
                                                  #3  0x00007fab3d78fd94 _ZN14QXcbConnectionC1EP19QXcbNativeInterfacebjPKc (libQt5XcbQpa.so.5)
                                                  #4  0x00007fab3d79556d _ZN15QXcbIntegrationC1ERK11QStringListRiPPc (libQt5XcbQpa.so.5)
                                                  #5  0x00007fab503443ad n/a (/usr/lib/qt/plugins/platforms/libqxcb.so)
                                                  #6  0x00007fab4f0a8aa2 _ZN27QPlatformIntegrationFactory6createERK7QStringRK11QStringListRiPPcS2_ (libQt5Gui.so.5)
                                                  #7  0x00007fab4f0b4c92 _ZN22QGuiApplicationPrivate25createPlatformIntegrationEv (libQt5Gui.so.5)
                                                  #8  0x00007fab4f0b5bcd _ZN22QGuiApplicationPrivate21createEventDispatcherEv (libQt5Gui.so.5)
                                                  #9  0x00007fab4ed7ef26 _ZN16QCoreApplication4initEv (libQt5Core.so.5)
                                                  #10 0x00007fab4ed7ef96 _ZN16QCoreApplicationC1ER23QCoreApplicationPrivate (libQt5Core.so.5)
                                                  #11 0x00007fab4f0b796d _ZN15QGuiApplicationC2ERiPPci (libQt5Gui.so.5)
                                                  #12 0x00007fab3d8837ba kdemain (libkdeinit5_klauncher.so)
                                                  #13 0x0000000000408698 n/a (kdeinit5)
                                                  #14 0x0000000000405496 n/a (kdeinit5)
                                                  #15 0x00007fab4e773710 __libc_start_main (libc.so.6)
                                                  #16 0x0000000000405969 _start (kdeinit5)
Mar 07 22:03:06 arch-home systemd-coredump[1306]: Process 1303 (drkonqi) of user 1000 dumped core.
                                                  
                                                  Stack trace of thread 1303:
                                                  #0  0x00007f50f19c02a8 raise (libc.so.6)
                                                  #1  0x00007f50f19c172a abort (libc.so.6)
                                                  #2  0x00007f50f2142ff1 _ZNK14QMessageLogger5fatalEPKcz (libQt5Core.so.5)
                                                  #3  0x00007f50e7480d94 _ZN14QXcbConnectionC1EP19QXcbNativeInterfacebjPKc (libQt5XcbQpa.so.5)
                                                  #4  0x00007f50e748656d _ZN15QXcbIntegrationC1ERK11QStringListRiPPc (libQt5XcbQpa.so.5)
                                                  #5  0x00007f50f538d3ad n/a (/usr/lib/qt/plugins/platforms/libqxcb.so)
                                                  #6  0x00007f50f2664aa2 _ZN27QPlatformIntegrationFactory6createERK7QStringRK11QStringListRiPPcS2_ (libQt5Gui.so.5)
                                                  #7  0x00007f50f2670c92 _ZN22QGuiApplicationPrivate25createPlatformIntegrationEv (libQt5Gui.so.5)
                                                  #8  0x00007f50f2671bcd _ZN22QGuiApplicationPrivate21createEventDispatcherEv (libQt5Gui.so.5)
                                                  #9  0x00007f50f233af26 _ZN16QCoreApplication4initEv (libQt5Core.so.5)
                                                  #10 0x00007f50f233af96 _ZN16QCoreApplicationC1ER23QCoreApplicationPrivate (libQt5Core.so.5)
                                                  #11 0x00007f50f26739b9 _ZN15QGuiApplicationC1ER22QGuiApplicationPrivate (libQt5Gui.so.5)
                                                  #12 0x00007f50f2c2bb3d _ZN12QApplicationC2ERiPPci (libQt5Widgets.so.5)
                                                  #13 0x0000000000439769 main (drkonqi)
                                                  #14 0x00007f50f19ad710 __libc_start_main (libc.so.6)
                                                  #15 0x000000000043a6c9 _start (drkonqi)

EDIT:
I've found this which may be really helpful:
https://bugs.kde.org/show_bug.cgi?id=348194
I've added the shutdown script and the crashes are gone. Also there is no more problem with with shutdown when using sddm (at least for now). Before there was some strange 90s job wait upon shutdown... Seems like a QT bug which is already known...

Last edited by pzogal (2016-03-08 20:54:04)

stefat77

Member

Registered: 2015-11-15

Posts: 10

Re: KF 5 & Plasma

Hi,
I have a flickering monitor from bottom screen to mouse cursor (plasma 5.5.5)
The problem appears randomly while I'm using the computer. Sometimes I can solve the issue doing some random desktop animation. Other times I need to reboot my laptop.

I report my Xorg.0.log:

[     3.815] (--) Log file renamed from "/var/log/Xorg.pid-423.log" to "/var/log/Xorg.0.log"
[     3.816] 
X.Org X Server 1.18.1
Release Date: 2016-02-08
[     3.816] X Protocol Version 11, Revision 0
[     3.816] Build Operating System: Linux 4.2.5-1-ARCH x86_64 
[     3.816] Current Operating System: Linux calcifer 4.4.5-1-ARCH #1 SMP PREEMPT Thu Mar 10 07:38:19 CET 2016 x86_64
[     3.816] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=146bff4b-56d7-4e28-aaa1-b6691c2252a8 rw quiet
[     3.816] Build Date: 11 February 2016  09:57:03AM
[     3.816]  
[     3.816] Current version of pixman: 0.34.0
[     3.816] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[     3.816] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[     3.816] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Mar 12 12:57:24 2016
[     3.818] (==) Using config directory: "/etc/X11/xorg.conf.d"
[     3.818] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[     3.819] (==) No Layout section.  Using the first Screen section.
[     3.819] (==) No screen section available. Using defaults.
[     3.819] (**) |-->Screen "Default Screen Section" (0)
[     3.819] (**) |   |-->Monitor "<default monitor>"
[     3.819] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[     3.819] (==) Automatically adding devices
[     3.819] (==) Automatically enabling devices
[     3.819] (==) Automatically adding GPU devices
[     3.819] (==) Max clients allowed: 256, resource mask: 0x1fffff
[     3.821] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[     3.821] 	Entry deleted from font path.
[     3.821] 	(Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[     3.822] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[     3.822] 	Entry deleted from font path.
[     3.822] 	(Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[     3.822] (==) FontPath set to:
	/usr/share/fonts/misc/,
	/usr/share/fonts/TTF/,
	/usr/share/fonts/OTF/,
	/usr/share/fonts/Type1/
[     3.822] (==) ModulePath set to "/usr/lib/xorg/modules"
[     3.822] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[     3.822] (II) Loader magic: 0x81ad60
[     3.822] (II) Module ABI versions:
[     3.822] 	X.Org ANSI C Emulation: 0.4
[     3.822] 	X.Org Video Driver: 20.0
[     3.822] 	X.Org XInput driver : 22.1
[     3.822] 	X.Org Server Extension : 9.0
[     3.823] (++) using VT number 1

[     3.823] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[     3.823] (II) xfree86: Adding drm device (/dev/dri/card0)
[     3.832] (II) xfree86: Adding drm device (/dev/dri/card1)
[     3.833] (--) PCI:*(0:0:2:0) 8086:0126:103c:1840 rev 9, Mem @ 0xc3000000/4194304, 0xb0000000/268435456, I/O @ 0x00005000/64
[     3.833] (--) PCI: (0:1:0:0) 1002:6840:103c:1840 rev 0, Mem @ 0xa0000000/268435456, 0xc2000000/131072, I/O @ 0x00004000/256, BIOS @ 0x????????/131072
[     3.834] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[     3.834] (II) LoadModule: "glx"
[     3.835] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[     3.846] (II) Module glx: vendor="X.Org Foundation"
[     3.846] 	compiled for 1.18.1, module version = 1.0.0
[     3.846] 	ABI class: X.Org Server Extension, version 9.0
[     3.846] (==) AIGLX enabled
[     3.846] (==) Matched intel as autoconfigured driver 0
[     3.846] (==) Matched ati as autoconfigured driver 1
[     3.846] (==) Matched intel as autoconfigured driver 2
[     3.846] (==) Matched modesetting as autoconfigured driver 3
[     3.846] (==) Matched fbdev as autoconfigured driver 4
[     3.846] (==) Matched vesa as autoconfigured driver 5
[     3.846] (==) Assigned the driver to the xf86ConfigLayout
[     3.846] (II) LoadModule: "intel"
[     3.848] (WW) Warning, couldn't open module intel
[     3.848] (II) UnloadModule: "intel"
[     3.848] (II) Unloading intel
[     3.848] (EE) Failed to load module "intel" (module does not exist, 0)
[     3.848] (II) LoadModule: "ati"
[     3.848] (II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so
[     3.848] (II) Module ati: vendor="X.Org Foundation"
[     3.848] 	compiled for 1.18.0, module version = 7.6.1
[     3.848] 	Module class: X.Org Video Driver
[     3.848] 	ABI class: X.Org Video Driver, version 20.0
[     3.848] (II) LoadModule: "radeon"
[     3.849] (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
[     3.851] (II) Module radeon: vendor="X.Org Foundation"
[     3.851] 	compiled for 1.18.0, module version = 7.6.1
[     3.851] 	Module class: X.Org Video Driver
[     3.851] 	ABI class: X.Org Video Driver, version 20.0
[     3.851] (II) LoadModule: "modesetting"
[     3.851] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[     3.851] (II) Module modesetting: vendor="X.Org Foundation"
[     3.851] 	compiled for 1.18.1, module version = 1.18.1
[     3.851] 	Module class: X.Org Video Driver
[     3.851] 	ABI class: X.Org Video Driver, version 20.0
[     3.851] (II) LoadModule: "fbdev"
[     3.852] (WW) Warning, couldn't open module fbdev
[     3.852] (II) UnloadModule: "fbdev"
[     3.852] (II) Unloading fbdev
[     3.852] (EE) Failed to load module "fbdev" (module does not exist, 0)
[     3.852] (II) LoadModule: "vesa"
[     3.852] (WW) Warning, couldn't open module vesa
[     3.852] (II) UnloadModule: "vesa"
[     3.852] (II) Unloading vesa
[     3.852] (EE) Failed to load module "vesa" (module does not exist, 0)
[     3.852] (II) RADEON: Driver for ATI Radeon chipsets:
	ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI FireMV 2400 (PCI),
	ATI Radeon Mobility X300 (M24) 3152 (PCIE),
	ATI FireGL M24 GL 3154 (PCIE), ATI FireMV 2400 3155 (PCI),
	ATI Radeon X600 (RV380) 3E50 (PCIE),
	ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136,
	ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP),
	ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
	ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP),
	ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
	ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP),
	ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
	ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650,
	ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237,
	ATI Radeon 8500 AIW BB (AGP), ATI Radeon IGP320M (U1) 4336,
	ATI Radeon IGP330M/340M/350M (U2) 4337,
	ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI),
	ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP),
	ATI Radeon X800PRO (R420) JI (AGP),
	ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
	ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
	ATI Radeon Mobility 9800 (M18) JN (AGP),
	ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP),
	ATI Radeon X800 VE (R420) JT (AGP), ATI Radeon X850 (R480) (AGP),
	ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
	ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP),
	ATI Radeon Mobility M7 LW (AGP),
	ATI Mobility FireGL 7800 M7 LX (AGP),
	ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
	ATI FireGL Mobility 9000 (M9) Ld (AGP),
	ATI Radeon Mobility 9000 (M9) Lf (AGP),
	ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI FireMV 2400 PCI,
	ATI Radeon 9700 Pro ND (AGP), ATI Radeon 9700/9500Pro NE (AGP),
	ATI Radeon 9600TX NF (AGP), ATI FireGL X1 NG (AGP),
	ATI Radeon 9800PRO NH (AGP), ATI Radeon 9800 NI (AGP),
	ATI FireGL X2 NK (AGP), ATI Radeon 9800XT NJ (AGP),
	ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
	ATI Radeon Mobility 9600 (M10) NQ (AGP),
	ATI Radeon Mobility 9600 (M11) NR (AGP),
	ATI Radeon Mobility 9600 (M10) NS (AGP),
	ATI FireGL Mobility T2 (M10) NT (AGP),
	ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP),
	ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
	ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
	ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI),
	ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI),
	ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI),
	ATI Radeon Mobility X300 (M22) 5460 (PCIE),
	ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
	ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE),
	ATI Radeon X800PRO (R423) UI (PCIE),
	ATI Radeon X800LE (R423) UJ (PCIE),
	ATI Radeon X800SE (R423) UK (PCIE),
	ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
	ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE),
	ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE),
	ATI FireGL unknown (R423) UR (PCIE),
	ATI FireGL unknown (R423) UT (PCIE),
	ATI Mobility FireGL V5000 (M26) (PCIE),
	ATI Mobility FireGL V5000 (M26) (PCIE),
	ATI Mobility Radeon X700 XL (M26) (PCIE),
	ATI Mobility Radeon X700 (M26) (PCIE),
	ATI Mobility Radeon X700 (M26) (PCIE),
	ATI Radeon X550XTX 5657 (PCIE), ATI Radeon 9100 IGP (A5) 5834,
	ATI Radeon Mobility 9100 IGP (U3) 5835,
	ATI Radeon XPRESS 200 5954 (PCIE),
	ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP),
	ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
	ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
	ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE),
	ATI Radeon XPRESS 200M 5975 (PCIE),
	ATI Radeon XPRESS 200 5A41 (PCIE),
	ATI Radeon XPRESS 200M 5A42 (PCIE),
	ATI Radeon XPRESS 200 5A61 (PCIE),
	ATI Radeon XPRESS 200M 5A62 (PCIE),
	ATI Radeon X300 (RV370) 5B60 (PCIE),
	ATI Radeon X600 (RV370) 5B62 (PCIE),
	ATI Radeon X550 (RV370) 5B63 (PCIE),
	ATI FireGL V3100 (RV370) 5B64 (PCIE),
	ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
	ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
	ATI Radeon Mobility 9200 (M9+) 5C63 (AGP),
	ATI Mobility Radeon X800 XT (M28) (PCIE),
	ATI Mobility FireGL V5100 (M28) (PCIE),
	ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE),
	ATI Radeon X850 XT PE (R480) (PCIE),
	ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
	ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
	ATI Radeon X850 XT (R480) (PCIE),
	ATI Radeon X800XT (R423) 5D57 (PCIE),
	ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE),
	ATI Radeon X700 PRO (RV410) (PCIE),
	ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
	ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800,
	ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800,
	ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300,
	ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800,
	ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800,
	ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
	ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
	ATI Mobility Radeon X1400, ATI Radeon X1300/X1550,
	ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300,
	ATI Mobility Radeon X1300, ATI Mobility Radeon X1300,
	ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300,
	ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350,
	ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550,
	ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450,
	ATI Radeon X1300/X1550, ATI Mobility Radeon X2300,
	ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
	ATI Mobility Radeon X1350, ATI Mobility Radeon X1450,
	ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350,
	ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600,
	ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600,
	ATI Mobility FireGL V5200, ATI Mobility Radeon X1600,
	ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600,
	ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400,
	ATI Mobility FireGL V5250, ATI Mobility Radeon X1700,
	ATI Mobility Radeon X1700 XT, ATI FireGL V5200,
	ATI Mobility Radeon X1700, ATI Radeon X2300HD,
	ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300,
	ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950,
	ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
	ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
	ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
	ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950,
	ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560,
	ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI FireGL V7400,
	ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560,
	ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835,
	ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200,
	ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740,
	ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT,
	ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT,
	ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600,
	ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
	ATI Radeon 4800 Series, ATI Radeon HD 4850 x2,
	ATI FirePro V8750 (FireGL), ATI FirePro V7760 (FireGL),
	ATI Mobility RADEON HD 4850, ATI Mobility RADEON HD 4850 X2,
	ATI Radeon 4800 Series, ATI FirePro RV770, AMD FireStream 9270,
	AMD FireStream 9250, ATI FirePro V8700 (FireGL),
	ATI Mobility RADEON HD 4870, ATI Mobility RADEON M98,
	ATI Mobility RADEON HD 4870, ATI Radeon 4800 Series,
	ATI Radeon 4800 Series, ATI FirePro M7750, ATI M98, ATI M98, ATI M98,
	ATI Mobility Radeon HD 4650, ATI Radeon RV730 (AGP),
	ATI Mobility Radeon HD 4670, ATI FirePro M5750,
	ATI Mobility Radeon HD 4670, ATI Radeon RV730 (AGP),
	ATI RV730XT [Radeon HD 4670], ATI RADEON E4600,
	ATI Radeon HD 4600 Series, ATI RV730 PRO [Radeon HD 4650],
	ATI FirePro V7750 (FireGL), ATI FirePro V5700 (FireGL),
	ATI FirePro V3750 (FireGL), ATI Mobility Radeon HD 4830,
	ATI Mobility Radeon HD 4850, ATI FirePro M7740, ATI RV740,
	ATI Radeon HD 4770, ATI Radeon HD 4700 Series, ATI Radeon HD 4770,
	ATI FirePro M5750, ATI RV610, ATI Radeon HD 2400 XT,
	ATI Radeon HD 2400 Pro, ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000,
	ATI RV610, ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT,
	ATI Mobility Radeon HD 2400, ATI RADEON E2400, ATI RV610,
	ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,
	ATI Mobility Radeon HD 3850, ATI Radeon HD3850,
	ATI Mobility Radeon HD 3850 X2, ATI RV670,
	ATI Mobility Radeon HD 3870, ATI Mobility Radeon HD 3870 X2,
	ATI Radeon HD3870 X2, ATI FireGL V7700, ATI Radeon HD3850,
	ATI Radeon HD3690, AMD Firestream 9170, ATI Radeon HD 4550,
	ATI Radeon RV710, ATI Radeon RV710, ATI Radeon RV710,
	ATI Radeon HD 4350, ATI Mobility Radeon 4300 Series,
	ATI Mobility Radeon 4500 Series, ATI Mobility Radeon 4500 Series,
	ATI FirePro RG220, ATI Mobility Radeon 4330, ATI RV630,
	ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
	ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
	ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
	ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
	ATI FireGL V3600, ATI Radeon HD 2600 LE,
	ATI Mobility FireGL Graphics Processor, ATI Radeon HD 3470,
	ATI Mobility Radeon HD 3430, ATI Mobility Radeon HD 3400 Series,
	ATI Radeon HD 3450, ATI Radeon HD 3450, ATI Radeon HD 3430,
	ATI Radeon HD 3450, ATI FirePro V3700, ATI FireMV 2450,
	ATI FireMV 2260, ATI FireMV 2260, ATI Radeon HD 3600 Series,
	ATI Radeon HD 3650 AGP, ATI Radeon HD 3600 PRO,
	ATI Radeon HD 3600 XT, ATI Radeon HD 3600 PRO,
	ATI Mobility Radeon HD 3650, ATI Mobility Radeon HD 3670,
	ATI Mobility FireGL V5700, ATI Mobility FireGL V5725,
	ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
	ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
	ATI Radeon HD 3300 Graphics, ATI Radeon HD 3200 Graphics,
	ATI Radeon 3000 Graphics, SUMO, SUMO, SUMO2, SUMO2, SUMO2, SUMO2,
	SUMO, SUMO, SUMO2, SUMO, SUMO, SUMO, SUMO, SUMO, ATI Radeon HD 4200,
	ATI Radeon 4100, ATI Mobility Radeon HD 4200,
	ATI Mobility Radeon 4100, ATI Radeon HD 4290, ATI Radeon HD 4250,
	AMD Radeon HD 6310 Graphics, AMD Radeon HD 6310 Graphics,
	AMD Radeon HD 6250 Graphics, AMD Radeon HD 6250 Graphics,
	AMD Radeon HD 6300 Series Graphics,
	AMD Radeon HD 6200 Series Graphics, PALM, PALM, PALM, CYPRESS,
	ATI FirePro (FireGL) Graphics Adapter,
	ATI FirePro (FireGL) Graphics Adapter,
	ATI FirePro (FireGL) Graphics Adapter, AMD Firestream 9370,
	AMD Firestream 9350, ATI Radeon HD 5800 Series,
	ATI Radeon HD 5800 Series, ATI Radeon HD 5800 Series,
	ATI Radeon HD 5800 Series, ATI Radeon HD 5900 Series,
	ATI Radeon HD 5900 Series, ATI Mobility Radeon HD 5800 Series,
	ATI Mobility Radeon HD 5800 Series,
	ATI FirePro (FireGL) Graphics Adapter,
	ATI FirePro (FireGL) Graphics Adapter,
	ATI Mobility Radeon HD 5800 Series, ATI Radeon HD 5700 Series,
	ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
	ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
	ATI Mobility Radeon HD 5000 Series,
	ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon HD 5570,
	ATI FirePro (FireGL) Graphics Adapter,
	ATI FirePro (FireGL) Graphics Adapter, ATI Radeon HD 5670,
	ATI Radeon HD 5570, ATI Radeon HD 5500 Series, REDWOOD,
	ATI Mobility Radeon HD 5000 Series,
	ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon Graphics,
	ATI Mobility Radeon Graphics, CEDAR,
	ATI FirePro (FireGL) Graphics Adapter,
	ATI FirePro (FireGL) Graphics Adapter, ATI FirePro 2270, CEDAR,
	ATI Radeon HD 5450, CEDAR, CEDAR, CAYMAN, CAYMAN, CAYMAN, CAYMAN,
	CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN,
	AMD Radeon HD 6900 Series, AMD Radeon HD 6900 Series, CAYMAN, CAYMAN,
	CAYMAN, AMD Radeon HD 6900M Series, Mobility Radeon HD 6000 Series,
	BARTS, BARTS, Mobility Radeon HD 6000 Series,
	Mobility Radeon HD 6000 Series, BARTS, BARTS, BARTS, BARTS,
	AMD Radeon HD 6800 Series, AMD Radeon HD 6800 Series,
	AMD Radeon HD 6700 Series, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
	TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
	TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
	CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS,
	CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, ARUBA, ARUBA,
	ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA,
	ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA,
	ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA,
	ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, TAHITI, TAHITI, TAHITI, TAHITI,
	TAHITI, TAHITI, TAHITI, TAHITI, TAHITI, TAHITI, TAHITI, TAHITI,
	TAHITI, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN,
	PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN,
	VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE,
	VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE,
	VERDE, VERDE, VERDE, VERDE, OLAND, OLAND, OLAND, OLAND, OLAND, OLAND,
	OLAND, OLAND, OLAND, OLAND, OLAND, OLAND, OLAND, OLAND, OLAND, OLAND,
	OLAND, HAINAN, HAINAN, HAINAN, HAINAN, HAINAN, HAINAN, BONAIRE,
	BONAIRE, BONAIRE, BONAIRE, BONAIRE, BONAIRE, BONAIRE, BONAIRE,
	BONAIRE, BONAIRE, BONAIRE, KABINI, KABINI, KABINI, KABINI, KABINI,
	KABINI, KABINI, KABINI, KABINI, KABINI, KABINI, KABINI, KABINI,
	KABINI, KABINI, KABINI, MULLINS, MULLINS, MULLINS, MULLINS, MULLINS,
	MULLINS, MULLINS, MULLINS, MULLINS, MULLINS, MULLINS, MULLINS,
	MULLINS, MULLINS, MULLINS, MULLINS, KAVERI, KAVERI, KAVERI, KAVERI,
	KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI,
	KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI,
	KAVERI, KAVERI, HAWAII, HAWAII, HAWAII, HAWAII, HAWAII, HAWAII,
	HAWAII, HAWAII, HAWAII, HAWAII, HAWAII, HAWAII
[     3.856] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[     3.856] (II) [KMS] Kernel modesetting enabled.
[     3.856] (II) modeset(0): using drv /dev/dri/card1
[     3.856] (II) modeset(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[     3.857] (==) modeset(0): Depth 24, (==) framebuffer bpp 32
[     3.857] (==) modeset(0): RGB weight 888
[     3.857] (==) modeset(0): Default visual is TrueColor
[     3.857] (II) Loading sub module "glamoregl"
[     3.857] (II) LoadModule: "glamoregl"
[     3.857] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[     3.866] (II) Module glamoregl: vendor="X.Org Foundation"
[     3.866] 	compiled for 1.18.1, module version = 1.0.0
[     3.866] 	ABI class: X.Org ANSI C Emulation, version 0.4
[     3.866] (II) glamor: OpenGL accelerated X.org driver based.
[     3.890] (II) glamor: EGL version 1.4 (DRI2):
[     3.901] (II) modeset(0): glamor initialized
[     3.901] (II) modeset(0): Output LVDS-1 has no monitor section
[     3.902] (II) modeset(0): Output VGA-1 has no monitor section
[     4.006] (II) modeset(0): Output HDMI-1 has no monitor section
[     4.007] (II) modeset(0): Output DP-1 has no monitor section
[     4.007] (II) modeset(0): EDID for output LVDS-1
[     4.007] (II) modeset(0): Manufacturer: SEC  Model: 315a  Serial#: 0
[     4.007] (II) modeset(0): Year: 2012  Week: 0
[     4.007] (II) modeset(0): EDID Version: 1.4
[     4.007] (II) modeset(0): Digital Display Input
[     4.007] (II) modeset(0): 6 bits per channel
[     4.007] (II) modeset(0): Digital interface is undefined
[     4.007] (II) modeset(0): Max Image Size [cm]: horiz.: 34  vert.: 19
[     4.007] (II) modeset(0): Gamma: 2.20
[     4.007] (II) modeset(0): No DPMS capabilities specified
[     4.007] (II) modeset(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[     4.007] (II) modeset(0): First detailed timing is preferred mode
[     4.007] (II) modeset(0): Preferred mode is native pixel format and refresh rate
[     4.007] (II) modeset(0): redX: 0.580 redY: 0.340   greenX: 0.310 greenY: 0.550
[     4.007] (II) modeset(0): blueX: 0.155 blueY: 0.155   whiteX: 0.313 whiteY: 0.329
[     4.007] (II) modeset(0): Manufacturer's mask: 0
[     4.007] (II) modeset(0): Supported detailed timing:
[     4.007] (II) modeset(0): clock: 76.3 MHz   Image Size:  344 x 194 mm
[     4.007] (II) modeset(0): h_active: 1366  h_sync: 1430  h_sync_end 1478 h_blank_end 1606 h_border: 0
[     4.007] (II) modeset(0): v_active: 768  v_sync: 770  v_sync_end 775 v_blanking: 792 v_border: 0
[     4.007] (II) modeset(0): Supported detailed timing:
[     4.007] (II) modeset(0): clock: 50.8 MHz   Image Size:  344 x 194 mm
[     4.007] (II) modeset(0): h_active: 1366  h_sync: 1430  h_sync_end 1478 h_blank_end 1606 h_border: 0
[     4.007] (II) modeset(0): v_active: 768  v_sync: 770  v_sync_end 775 v_blanking: 792 v_border: 0
[     4.007] (II) modeset(0): Unknown vendor-specific block 2
[     4.007] (II) modeset(0): EDID (in hex):
[     4.007] (II) modeset(0): 	00ffffffffffff004ca35a3100000000
[     4.007] (II) modeset(0): 	00160104902213780a87f594574f8c27
[     4.007] (II) modeset(0): 	27505400000001010101010101010101
[     4.007] (II) modeset(0): 	010101010101ce1d56f0500018304030
[     4.007] (II) modeset(0): 	250058c210000019d81356f050001830
[     4.007] (II) modeset(0): 	4030250058c210000019000000000000
[     4.007] (II) modeset(0): 	00000000000000000000000000000002
[     4.007] (II) modeset(0): 	000c42f20c4c641318296e00000000e4
[     4.008] (II) modeset(0): Printing probed modes for output LVDS-1
[     4.008] (II) modeset(0): Modeline "1366x768"x60.0   76.30  1366 1430 1478 1606  768 770 775 792 -hsync -vsync (47.5 kHz eP)
[     4.008] (II) modeset(0): Modeline "1366x768"x39.9   50.80  1366 1430 1478 1606  768 770 775 792 -hsync -vsync (31.6 kHz e)
[     4.008] (II) modeset(0): Modeline "1024x768"x120.1  133.47  1024 1100 1212 1400  768 768 770 794 doublescan -hsync +vsync (95.3 kHz d)
[     4.008] (II) modeset(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz d)
[     4.008] (II) modeset(0): Modeline "960x720"x120.0  117.00  960 1024 1128 1300  720 720 722 750 doublescan -hsync +vsync (90.0 kHz d)
[     4.008] (II) modeset(0): Modeline "928x696"x120.1  109.15  928 976 1088 1264  696 696 698 719 doublescan -hsync +vsync (86.4 kHz d)
[     4.008] (II) modeset(0): Modeline "896x672"x120.0  102.40  896 960 1060 1224  672 672 674 697 doublescan -hsync +vsync (83.7 kHz d)
[     4.008] (II) modeset(0): Modeline "800x600"x120.0   81.00  800 832 928 1080  600 600 602 625 doublescan +hsync +vsync (75.0 kHz d)
[     4.008] (II) modeset(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz d)
[     4.008] (II) modeset(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz d)
[     4.008] (II) modeset(0): Modeline "700x525"x120.0   61.00  700 744 820 940  525 526 532 541 doublescan +hsync +vsync (64.9 kHz d)
[     4.008] (II) modeset(0): Modeline "640x512"x120.0   54.00  640 664 720 844  512 512 514 533 doublescan +hsync +vsync (64.0 kHz d)
[     4.008] (II) modeset(0): Modeline "640x480"x120.0   54.00  640 688 744 900  480 480 482 500 doublescan +hsync +vsync (60.0 kHz d)
[     4.008] (II) modeset(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz d)
[     4.008] (II) modeset(0): Modeline "512x384"x120.0   32.50  512 524 592 672  384 385 388 403 doublescan -hsync -vsync (48.4 kHz d)
[     4.008] (II) modeset(0): Modeline "400x300"x120.6   20.00  400 420 484 528  300 300 302 314 doublescan +hsync +vsync (37.9 kHz d)
[     4.008] (II) modeset(0): Modeline "400x300"x112.7   18.00  400 412 448 512  300 300 301 312 doublescan +hsync +vsync (35.2 kHz d)
[     4.008] (II) modeset(0): Modeline "320x240"x120.1   12.59  320 328 376 400  240 245 246 262 doublescan -hsync -vsync (31.5 kHz d)
[     4.009] (II) modeset(0): EDID for output VGA-1
[     4.113] (II) modeset(0): EDID for output HDMI-1
[     4.113] (II) modeset(0): EDID for output DP-1
[     4.113] (II) modeset(0): Output LVDS-1 connected
[     4.113] (II) modeset(0): Output VGA-1 disconnected
[     4.113] (II) modeset(0): Output HDMI-1 disconnected
[     4.113] (II) modeset(0): Output DP-1 disconnected
[     4.113] (II) modeset(0): Using exact sizes for initial modes
[     4.113] (II) modeset(0): Output LVDS-1 using initial mode 1366x768 +0+0
[     4.113] (II) modeset(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[     4.113] (==) modeset(0): DPI set to (96, 96)
[     4.113] (II) Loading sub module "fb"
[     4.113] (II) LoadModule: "fb"
[     4.113] (II) Loading /usr/lib/xorg/modules/libfb.so
[     4.116] (II) Module fb: vendor="X.Org Foundation"
[     4.116] 	compiled for 1.18.1, module version = 1.0.0
[     4.116] 	ABI class: X.Org ANSI C Emulation, version 0.4
[     4.116] (==) RADEON(G0): Depth 24, (--) framebuffer bpp 32
[     4.116] (II) RADEON(G0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[     4.116] (==) RADEON(G0): Default visual is TrueColor
[     4.116] (==) RADEON(G0): RGB weight 888
[     4.116] (II) RADEON(G0): Using 8 bits per RGB (8 bit DAC)
[     4.116] (--) RADEON(G0): Chipset: "TURKS" (ChipID = 0x6840)
[     4.126] (II) Loading sub module "dri2"
[     4.126] (II) LoadModule: "dri2"
[     4.126] (II) Module "dri2" already built-in
[     4.126] (II) Loading sub module "exa"
[     4.126] (II) LoadModule: "exa"
[     4.126] (II) Loading /usr/lib/xorg/modules/libexa.so
[     4.127] (II) Module exa: vendor="X.Org Foundation"
[     4.127] 	compiled for 1.18.1, module version = 2.6.0
[     4.127] 	ABI class: X.Org Video Driver, version 20.0
[     4.127] (II) RADEON(G0): KMS Color Tiling: enabled
[     4.127] (II) RADEON(G0): KMS Color Tiling 2D: enabled
[     4.127] (II) RADEON(G0): KMS Pageflipping: enabled
[     4.127] (II) RADEON(G0): SwapBuffers wait for vsync: enabled
[     4.127] (II) RADEON(G0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[     4.127] (II) RADEON(G0): mem size init: gart size :3fdde000 vram size: s:80000000 visible:7f88b000
[     4.127] (II) RADEON(G0): EXA: Driver will allow EXA pixmaps in VRAM
[     4.127] (==) RADEON(G0): DPI set to (96, 96)
[     4.127] (II) Loading sub module "fb"
[     4.127] (II) LoadModule: "fb"
[     4.127] (II) Loading /usr/lib/xorg/modules/libfb.so
[     4.127] (II) Module fb: vendor="X.Org Foundation"
[     4.127] 	compiled for 1.18.1, module version = 1.0.0
[     4.127] 	ABI class: X.Org ANSI C Emulation, version 0.4
[     4.128] (II) Loading sub module "ramdac"
[     4.128] (II) LoadModule: "ramdac"
[     4.128] (II) Module "ramdac" already built-in
[     4.128] (==) Depth 24 pixmap format is 32 bpp
[     4.128] (II) RADEON(G0): [DRI2] Setup complete
[     4.128] (II) RADEON(G0): [DRI2]   DRI driver: r600
[     4.128] (II) RADEON(G0): [DRI2]   VDPAU driver: r600
[     4.128] (II) RADEON(G0): Front buffer size: 3072K
[     4.128] (II) RADEON(G0): VRAM usage limit set to 1877713K
[     4.129] (==) RADEON(G0): DRI3 disabled
[     4.129] (==) RADEON(G0): Backing store enabled
[     4.129] (II) RADEON(G0): Direct rendering enabled
[     4.129] (II) EXA(256): Driver allocated offscreen pixmaps
[     4.129] (II) EXA(256): Driver registered support for the following operations:
[     4.129] (II)         Solid
[     4.129] (II)         Copy
[     4.129] (II)         Composite (RENDER acceleration)
[     4.129] (II)         UploadToScreen
[     4.129] (II)         DownloadFromScreen
[     4.129] (II) RADEON(G0): Acceleration enabled
[     4.129] (==) RADEON(G0): DPMS enabled
[     4.129] (==) RADEON(G0): Silken mouse enabled
[     4.130] (II) RADEON(G0): Set up textured video
[     4.130] (II) RADEON(G0): [XvMC] Associated with Radeon Textured Video.
[     4.130] (II) RADEON(G0): [XvMC] Extension initialized.
[     4.130] (II) RADEON(G0): RandR 1.2 enabled, ignore the following RandR disabled message.
[     4.256] (==) modeset(0): Backing store enabled
[     4.256] (==) modeset(0): Silken mouse enabled
[     4.256] (II) modeset(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[     4.256] (==) modeset(0): DPMS enabled
[     4.256] (II) modeset(0): [DRI2] Setup complete
[     4.256] (II) modeset(0): [DRI2]   DRI driver: i965
[     4.256] (II) modeset(0): [DRI2]   VDPAU driver: i965
[     4.273] (--) RandR disabled
[     4.284] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[     4.284] (II) AIGLX: enabled GLX_ARB_create_context
[     4.284] (II) AIGLX: enabled GLX_ARB_create_context_profile
[     4.284] (II) AIGLX: enabled GLX_EXT_create_context_es{,2}_profile
[     4.284] (II) AIGLX: enabled GLX_INTEL_swap_event
[     4.284] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[     4.284] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[     4.284] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[     4.284] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[     4.284] (II) AIGLX: enabled GLX_ARB_create_context_robustness
[     4.284] (II) AIGLX: Loaded and initialized i965
[     4.284] (II) GLX: Initialized DRI2 GL provider for screen 0
[     4.285] (II) modeset(0): Damage tracking initialized
[     4.285] (II) modeset(0): Setting screen physical size to 361 x 203
[     4.364] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[     4.364] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[     4.364] (**) Power Button: Applying InputClass "system-keyboard"
[     4.364] (II) LoadModule: "evdev"
[     4.364] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[     4.366] (II) Module evdev: vendor="X.Org Foundation"
[     4.366] 	compiled for 1.18.0, module version = 2.10.1
[     4.366] 	Module class: X.Org XInput Driver
[     4.366] 	ABI class: X.Org XInput driver, version 22.1
[     4.366] (II) Using input driver 'evdev' for 'Power Button'
[     4.366] (**) Power Button: always reports core events
[     4.366] (**) evdev: Power Button: Device: "/dev/input/event3"
[     4.366] (--) evdev: Power Button: Vendor 0 Product 0x1
[     4.366] (--) evdev: Power Button: Found keys
[     4.366] (II) evdev: Power Button: Configuring as keyboard
[     4.366] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event3"
[     4.366] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[     4.366] (**) Option "xkb_rules" "evdev"
[     4.366] (**) Option "xkb_layout" "it"
[     4.393] (II) config/udev: Adding input device Video Bus (/dev/input/event8)
[     4.393] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[     4.393] (**) Video Bus: Applying InputClass "system-keyboard"
[     4.393] (II) Using input driver 'evdev' for 'Video Bus'
[     4.393] (**) Video Bus: always reports core events
[     4.393] (**) evdev: Video Bus: Device: "/dev/input/event8"
[     4.393] (--) evdev: Video Bus: Vendor 0 Product 0x6
[     4.393] (--) evdev: Video Bus: Found keys
[     4.393] (II) evdev: Video Bus: Configuring as keyboard
[     4.393] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input10/event8"
[     4.393] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[     4.393] (**) Option "xkb_rules" "evdev"
[     4.393] (**) Option "xkb_layout" "it"
[     4.395] (II) config/udev: Adding input device Video Bus (/dev/input/event7)
[     4.395] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[     4.395] (**) Video Bus: Applying InputClass "system-keyboard"
[     4.395] (II) Using input driver 'evdev' for 'Video Bus'
[     4.395] (**) Video Bus: always reports core events
[     4.395] (**) evdev: Video Bus: Device: "/dev/input/event7"
[     4.395] (--) evdev: Video Bus: Vendor 0 Product 0x6
[     4.395] (--) evdev: Video Bus: Found keys
[     4.395] (II) evdev: Video Bus: Configuring as keyboard
[     4.395] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:02/LNXVIDEO:00/input/input9/event7"
[     4.395] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[     4.395] (**) Option "xkb_rules" "evdev"
[     4.395] (**) Option "xkb_layout" "it"
[     4.396] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[     4.396] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[     4.396] (**) Power Button: Applying InputClass "system-keyboard"
[     4.396] (II) Using input driver 'evdev' for 'Power Button'
[     4.396] (**) Power Button: always reports core events
[     4.396] (**) evdev: Power Button: Device: "/dev/input/event2"
[     4.396] (--) evdev: Power Button: Vendor 0 Product 0x1
[     4.396] (--) evdev: Power Button: Found keys
[     4.396] (II) evdev: Power Button: Configuring as keyboard
[     4.397] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3/event2"
[     4.397] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 9)
[     4.397] (**) Option "xkb_rules" "evdev"
[     4.397] (**) Option "xkb_layout" "it"
[     4.398] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[     4.398] (II) No input driver specified, ignoring this device.
[     4.398] (II) This device may have been added with another device file.
[     4.400] (II) config/udev: Adding input device MOSART Semi. 2.4G Wireless Mouse (/dev/input/event10)
[     4.400] (**) MOSART Semi. 2.4G Wireless Mouse: Applying InputClass "evdev pointer catchall"
[     4.400] (II) Using input driver 'evdev' for 'MOSART Semi. 2.4G Wireless Mouse'
[     4.400] (**) MOSART Semi. 2.4G Wireless Mouse: always reports core events
[     4.400] (**) evdev: MOSART Semi. 2.4G Wireless Mouse: Device: "/dev/input/event10"
[     4.453] (--) evdev: MOSART Semi. 2.4G Wireless Mouse: Vendor 0x3938 Product 0x1031
[     4.453] (--) evdev: MOSART Semi. 2.4G Wireless Mouse: Found 9 mouse buttons
[     4.453] (--) evdev: MOSART Semi. 2.4G Wireless Mouse: Found scroll wheel(s)
[     4.453] (--) evdev: MOSART Semi. 2.4G Wireless Mouse: Found relative axes
[     4.453] (--) evdev: MOSART Semi. 2.4G Wireless Mouse: Found x and y relative axes
[     4.453] (--) evdev: MOSART Semi. 2.4G Wireless Mouse: Found absolute axes
[     4.453] (II) evdev: MOSART Semi. 2.4G Wireless Mouse: Forcing absolute x/y axes to exist.
[     4.453] (II) evdev: MOSART Semi. 2.4G Wireless Mouse: Configuring as mouse
[     4.453] (II) evdev: MOSART Semi. 2.4G Wireless Mouse: Adding scrollwheel support
[     4.453] (**) evdev: MOSART Semi. 2.4G Wireless Mouse: YAxisMapping: buttons 4 and 5
[     4.453] (**) evdev: MOSART Semi. 2.4G Wireless Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[     4.453] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.2/3-1.2:1.0/0003:3938:1031.0001/input/input13/event10"
[     4.453] (II) XINPUT: Adding extended input device "MOSART Semi. 2.4G Wireless Mouse" (type: MOUSE, id 10)
[     4.454] (II) evdev: MOSART Semi. 2.4G Wireless Mouse: initialized for relative axes.
[     4.454] (WW) evdev: MOSART Semi. 2.4G Wireless Mouse: ignoring absolute axes.
[     4.454] (**) MOSART Semi. 2.4G Wireless Mouse: (accel) keeping acceleration scheme 1
[     4.454] (**) MOSART Semi. 2.4G Wireless Mouse: (accel) acceleration profile 0
[     4.454] (**) MOSART Semi. 2.4G Wireless Mouse: (accel) acceleration factor: 2.000
[     4.454] (**) MOSART Semi. 2.4G Wireless Mouse: (accel) acceleration threshold: 4
[     4.455] (II) config/udev: Adding input device MOSART Semi. 2.4G Wireless Mouse (/dev/input/mouse0)
[     4.455] (II) No input driver specified, ignoring this device.
[     4.455] (II) This device may have been added with another device file.
[     4.456] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event11)
[     4.456] (II) No input driver specified, ignoring this device.
[     4.456] (II) This device may have been added with another device file.
[     4.457] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event12)
[     4.457] (II) No input driver specified, ignoring this device.
[     4.457] (II) This device may have been added with another device file.
[     4.457] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event13)
[     4.457] (II) No input driver specified, ignoring this device.
[     4.457] (II) This device may have been added with another device file.
[     4.458] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event14)
[     4.458] (II) No input driver specified, ignoring this device.
[     4.458] (II) This device may have been added with another device file.
[     4.459] (II) config/udev: Adding input device HP Webcam-50 (/dev/input/event6)
[     4.460] (**) HP Webcam-50: Applying InputClass "evdev keyboard catchall"
[     4.460] (**) HP Webcam-50: Applying InputClass "system-keyboard"
[     4.460] (II) Using input driver 'evdev' for 'HP Webcam-50'
[     4.460] (**) HP Webcam-50: always reports core events
[     4.460] (**) evdev: HP Webcam-50: Device: "/dev/input/event6"
[     4.460] (--) evdev: HP Webcam-50: Vendor 0x4f2 Product 0xb2f4
[     4.460] (--) evdev: HP Webcam-50: Found keys
[     4.460] (II) evdev: HP Webcam-50: Configuring as keyboard
[     4.460] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5:1.0/input/input8/event6"
[     4.460] (II) XINPUT: Adding extended input device "HP Webcam-50" (type: KEYBOARD, id 11)
[     4.460] (**) Option "xkb_rules" "evdev"
[     4.460] (**) Option "xkb_layout" "it"
[     4.462] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[     4.462] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[     4.462] (**) AT Translated Set 2 keyboard: Applying InputClass "system-keyboard"
[     4.462] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[     4.463] (**) AT Translated Set 2 keyboard: always reports core events
[     4.463] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[     4.463] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[     4.463] (--) evdev: AT Translated Set 2 keyboard: Found keys
[     4.463] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[     4.463] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[     4.463] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 12)
[     4.463] (**) Option "xkb_rules" "evdev"
[     4.463] (**) Option "xkb_layout" "it"
[     4.465] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event15)
[     4.465] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[     4.465] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchscreen catchall"
[     4.465] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[     4.465] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[     4.465] (II) LoadModule: "synaptics"
[     4.465] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[     4.466] (II) Module synaptics: vendor="X.Org Foundation"
[     4.466] 	compiled for 1.18.0, module version = 1.8.3
[     4.466] 	Module class: X.Org XInput Driver
[     4.466] 	ABI class: X.Org XInput driver, version 22.1
[     4.467] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[     4.467] (**) SynPS/2 Synaptics TouchPad: always reports core events
[     4.467] (**) Option "Device" "/dev/input/event15"
[     4.523] (II) synaptics: SynPS/2 Synaptics TouchPad: ignoring touch events for semi-multitouch device
[     4.523] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1222 - 5734 (res 48)
[     4.523] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 910 - 4974 (res 95)
[     4.523] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[     4.523] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[     4.523] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
[     4.523] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[     4.523] (**) Option "TapButton1" "1"
[     4.524] (**) Option "TapButton2" "2"
[     4.524] (**) Option "TapButton3" "3"
[     4.524] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[     4.524] (**) SynPS/2 Synaptics TouchPad: always reports core events
[     4.550] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input7/event15"
[     4.550] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 13)
[     4.550] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[     4.550] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75
[     4.550] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.033
[     4.550] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[     4.550] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[     4.550] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[     4.550] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[     4.550] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[     4.551] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse1)
[     4.551] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[     4.552] (II) config/udev: Adding input device ST LIS3LV02DL Accelerometer (/dev/input/event4)
[     4.552] (II) No input driver specified, ignoring this device.
[     4.552] (II) This device may have been added with another device file.
[     4.552] (II) config/udev: Adding input device ST LIS3LV02DL Accelerometer (/dev/input/js0)
[     4.552] (II) No input driver specified, ignoring this device.
[     4.552] (II) This device may have been added with another device file.
[     4.553] (II) config/udev: Adding input device PC Speaker (/dev/input/event5)
[     4.553] (II) No input driver specified, ignoring this device.
[     4.553] (II) This device may have been added with another device file.
[     4.554] (II) config/udev: Adding input device HP WMI hotkeys (/dev/input/event9)
[     4.554] (**) HP WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[     4.554] (**) HP WMI hotkeys: Applying InputClass "system-keyboard"
[     4.554] (II) Using input driver 'evdev' for 'HP WMI hotkeys'
[     4.554] (**) HP WMI hotkeys: always reports core events
[     4.554] (**) evdev: HP WMI hotkeys: Device: "/dev/input/event9"
[     4.554] (--) evdev: HP WMI hotkeys: Vendor 0 Product 0
[     4.554] (--) evdev: HP WMI hotkeys: Found keys
[     4.554] (II) evdev: HP WMI hotkeys: Configuring as keyboard
[     4.554] (**) Option "config_info" "udev:/sys/devices/virtual/input/input11/event9"
[     4.554] (II) XINPUT: Adding extended input device "HP WMI hotkeys" (type: KEYBOARD, id 14)
[     4.554] (**) Option "xkb_rules" "evdev"
[     4.554] (**) Option "xkb_layout" "it"
[     9.953] (II) modeset(0): EDID vendor "SEC", prod id 12634
[     9.953] (II) modeset(0): Printing DDC gathered Modelines:
[     9.953] (II) modeset(0): Modeline "1366x768"x0.0   76.30  1366 1430 1478 1606  768 770 775 792 -hsync -vsync (47.5 kHz eP)
[     9.953] (II) modeset(0): Modeline "1366x768"x0.0   50.80  1366 1430 1478 1606  768 770 775 792 -hsync -vsync (31.6 kHz e)
[    10.473] (II) modeset(0): EDID vendor "SEC", prod id 12634
[    10.473] (II) modeset(0): Printing DDC gathered Modelines:
[    10.473] (II) modeset(0): Modeline "1366x768"x0.0   76.30  1366 1430 1478 1606  768 770 775 792 -hsync -vsync (47.5 kHz eP)
[    10.473] (II) modeset(0): Modeline "1366x768"x0.0   50.80  1366 1430 1478 1606  768 770 775 792 -hsync -vsync (31.6 kHz e)

termNinja

Member

Registered: 2016-02-21

Posts: 19

Re: KF 5 & Plasma

Here's a graphical bug I've been having on my system for some time. It appears from time to time, I don't know how to trigger it honestly.
I'm running arch on HP 250 G4 laptop with intel i5 5200u and AMD Radeon R5 M330 card.

I've been mostly able to reproduce the bug by switching around workspaces.
https://vid.me/rgS6

Ravior

Member

From: Galați, Romania

Registered: 2013-01-10

Posts: 39

Re: KF 5 & Plasma

Here's a graphical bug I've been having on my system for some time. It appears from time to time, I don't know how to trigger it honestly.
I'm running arch on HP 250 G4 laptop with intel i5 5200u and AMD Radeon R5 M330 card.

I've been mostly able to reproduce the bug by switching around workspaces.
https://vid.me/rgS6

Have you raised a ticket for this? If so, can you post the link to it?
I think that I have managed to break it without having to switch the workspaces on my bumblebe setup (intel + nvidia).

termNinja

Member

Registered: 2016-02-21

Posts: 19

Re: KF 5 & Plasma

Here's a graphical bug I've been having on my system for some time. It appears from time to time, I don't know how to trigger it honestly.
I'm running arch on HP 250 G4 laptop with intel i5 5200u and AMD Radeon R5 M330 card.

I've been mostly able to reproduce the bug by switching around workspaces.
https://vid.me/rgS6

Have you raised a ticket for this? If so, can you post the link to it?
I think that I have managed to break it without having to switch the workspaces on my bumblebe setup (intel + nvidia).

I didn't. I am not sure what the problem was, but after installing xf86-video-intel it seems to have fixed my problems.

Still, I don't have enough courage to try messing around with ATI graphic card (using my integrated one atm) until I read enough docs and have enough time

antnythr

Member

Registered: 2014-08-27

Posts: 36

Re: KF 5 & Plasma

I just upgraded to Plasma 5.6 a few minutes ago and I'm having trouble with Kwallet not opening my wallet and prompting me for my password. It never accepts my password (the password is correct).

Any thoughts?

Shinto

Member

Registered: 2012-07-27

Posts: 78

Re: KF 5 & Plasma

I just upgraded to Plasma 5.6 a few minutes ago and I'm having trouble with Kwallet not opening my wallet and prompting me for my password. It never accepts my password (the password is correct).

Any thoughts?

Checked your keyboard layout?

antnythr

Member

Registered: 2014-08-27

Posts: 36

Re: KF 5 & Plasma

I just upgraded to Plasma 5.6 a few minutes ago and I'm having trouble with Kwallet not opening my wallet and prompting me for my password. It never accepts my password (the password is correct).

Any thoughts?

Checked your keyboard layout?

I hadn't, but I just did and there doesn't seem to be any change.

midixinga

Member

Registered: 2014-01-18

Posts: 193

Re: KF 5 & Plasma

Upgrade to Plasma 5.6/frameworks 5.20:
- the widget "show desktop" is broken; if this widget is added to my main control panel, all other widgets with the exception of the start menu are invisible and not clickable; the calender always opens, Edit: seems to be known issue: https://bugs.kde.org/show_bug.cgi?id=360120
- my desktop theme is broken; i had "breeze" with two exceptions: "transcluent background" and "control panel background" were set to "air". I also exported my theme and saved it with an own name. whereas the control panel background is still working, the symbol background isn't transparent anymore. Even with theme air it's not transparent anymore. So maybe the is a problem with the theme "air" in plasma 5.6.
Unfortunately the theme editor was removed :-( very bad decision
But the dropbox systray is now fine: no black, pink or gray background anymore :-)

Last edited by midixinga (2016-03-27 20:15:28)

Soukyuu

Member

Registered: 2014-04-08

Posts: 854

Re: KF 5 & Plasma

Theme editor removed? Why would they do that, that was the last non-hacky option to have a transparent panel/application menu with Breeze >_<

---

[ Arch x86_64 | linux | Framework 13 | AMD Ryzen™ 5 7640U | 32GB RAM | KDE Plasma Wayland ]

Buddlespit

Member

From: Chesapeake, Va.

Registered: 2014-02-07

Posts: 501

Re: KF 5 & Plasma

Anyone else having issues with the launcher (default) panel not auto-hiding after the update to 5.6?

---

Hw-Probe

midixinga

Member

Registered: 2014-01-18

Posts: 193

Re: KF 5 & Plasma

Anyone else having issues with the launcher (default) panel not auto-hiding after the update to 5.6?

no, in fact it's the only one, which autohides automatically, all other panels need a "mouse touch"

Buddlespit

Member

From: Chesapeake, Va.

Registered: 2014-02-07

Posts: 501

Re: KF 5 & Plasma

Anyone else having issues with the launcher (default) panel not auto-hiding after the update to 5.6?

no, in fact it's the only one, which autohides automatically, all other panels need a "mouse touch"

I decided, after reading your reply to me, to try adding a second panel and seeing if I could get THAT one to auto-hide. It (also) wouldn't auto-hide, but did make the original panel work properly. After a reboot or three, I deleted the second panel and the original seems to continue to work properly. Go figure...

---

Hw-Probe

aexoxea

Member

From: Australia

Registered: 2012-11-17

Posts: 70

Website

Re: KF 5 & Plasma

Some nice work in this update; performance has noticeably improved for me in several areas, and the work on visuals and enhancements to the task manager are welcome.

Alas, some new (to me) bugs along for the ride:

• KDE#348043: Maximized windows are covered by plasma panel in "always visible mode" - Now happening for single-screen users. Especially irritating when the panel is at the top of the screen! Shows as confirmed.

• KDE#360120: Show Desktop Applet corrupts panel when added to it (spacing issues) - @midixinga noted this earlier, now shows as fixed for 5.6.1.

• KDE#361071: Weather Forecast Widget - Cannot save configuration when loaded in system tray - Minor matter I just reported.

Last edited by aexoxea (2016-03-28 04:59:20)

OdinEidolon

Member

From: Belluno - Italy

Registered: 2011-01-31

Posts: 498

Re: KF 5 & Plasma

Some nice work in this update; performance has noticeably improved for me in several areas, and the work on visuals and enhancements to the task manager are welcome.

Alas, some new (to me) bugs along for the ride:

• KDE#348043: Maximized windows are covered by plasma panel in "always visible mode" - Now happening for single-screen users. Especially irritating when the panel is at the top of the screen! Shows as confirmed.

• KDE#360120: Show Desktop Applet corrupts panel when added to it (spacing issues) - @midixinga noted this earlier, now shows as fixed for 5.6.1.

• KDE#361071: Weather Forecast Widget - Cannot save configuration when loaded in system tray - Minor matter I just reported.

Thank you for reporting bugs.

---

Hardware: 2016 Dell XPS15 - matte FullHD - i5-6300HQ - 32GB DDR4 - Nvidia GTX960M - Samsung 840EVO 250GB SSD - 56Wh
Software: Plasma 5 - rEFInd - linux-ck - preload - prelink - verynice - psd - bumblebee

mcloaked

Member

From: Yorkshire, UK

Registered: 2012-02-02

Posts: 1,240

Re: KF 5 & Plasma

In plasma 5.6 it seems for my system that the option to have a blinking cursor for the launch of custom programs such as google-chrome or customised versions of thunderbird when launched from the kicker or from icons placed on the panel the icon doesn't blink but just shows a static icon now until the program starts.  Is this observed by anyone else? ( set as per Settings -> Applications -> Launch feedback - change to "blinking cursor")

Last edited by mcloaked (2016-03-29 13:05:40)

---

Mike C

The Infinity

Member

Registered: 2014-07-05

Posts: 91

Website

Re: KF 5 & Plasma

The new Qt version is causing problems for Qt Designer.

QMetaProperty::read: Unable to handle unregistered datatype 'ActionTypes' for property 'KShortcutsEditor::actionTypes'
Cannot mix incompatible Qt library (version 0x50501) with this library (version 0x50600)

Seems like there are still some plugins for Qt 5.5.1 which can not be combined with Qt 5.6.0. I'm not sure which plugins are concerned exactly (because the error message is not very specific) but it is very likely that some QWidgets provided by KDE causing this.

EDIT: I just noticed that this issue is already discussed here: https://bbs.archlinux.org/viewtopic.php?id=210622
The plugin causing the issue is part of the qt5-quick1 package which has been removed from Qt with the 5.6.0 update and hence hasn't been updated like the other modules. Since nothing depends on it, you can simply remove the qt5-quick1 package to resolve this issue.

Last edited by The Infinity (2016-03-28 19:13:34)

---

AUR packages | GitHub page

fatino

Member

Registered: 2012-04-07

Posts: 11

Re: KF 5 & Plasma

My notifications after upgrade went back to old ones. I have notifications turned on in tray and all. I even added the plasmoid manually but still the notifications appear in upper right corner with old style.
EDIT: So after reboot everything is fine. Wierd I did logout and login.

Last edited by fatino (2016-03-28 19:59:45)

ehsisthatsweird

Member

Registered: 2016-03-28

Posts: 2

Re: KF 5 & Plasma

Anyone else having issues with the launcher (default) panel not auto-hiding after the update to 5.6?

Yep, I have the same problem. Default panels don't hide, no matter how many times I make a new one. If I add an empty panel it autohides as it should, but the default panel is still broken.

Also my dual monitor setup stopped working (nvidia and intel graphics), if I connect a display to my laptop, the laptop screen freezes and I can't click anything on it. Don't think I updated any video drivers this time, so this should be related to plasma update.

misiunt

Member

Registered: 2015-08-28

Posts: 7

Re: KF 5 & Plasma

Hello,

anyone having a scaling issue under wayland ? When I start the plasma-wayland-session all windows (except the non -Qt ones) are scaled up disproportionately. The fonts are also huge downscaling doesn't help .

regards
gregor

student975

Member

From: Russian Federation

Registered: 2011-03-05

Posts: 613

Re: KF 5 & Plasma

Hi!

With plasma 5.6.0 I have switched desktop theme from "Breeze dark" to "Breeze" with the aim desktop theme will follow color theme, which is one of the interesting 5.6.0 feature. But after re-logging in I see Breeze dark desktop theme again (with own predefined colors).

Are you affected with the issue?

EDIT: Aha, have found: at first I must select Breeze workspace theme, and only then set needed color. This way desktop theme <-> color theme is persistent between plasma sessions.

Last edited by student975 (2016-03-29 09:49:32)

---

"I exist" is the best myth I know..

Zpalmtree

Member

Registered: 2015-09-06

Posts: 20

Re: KF 5 & Plasma

I'm having a small bug with dolphin, the KDE file manager. I only use dolphin and konsole, none of the rest of the kde suite. Installing with pacman konsole and dolphin, when running dolphin in a terminal I get:

dolphin: error while loading shared libraries: libKF5KCMUtils.so.5: cannot open shared object file: No such file or directory

however, if I install plasma, it runs perfectly fine. Before this latest kde update it was fine. I'm not sure what package libKF5KCMUtils.so.5 comes from but it needs to be added as a dependency to dolphin.

edit: reported upstream

Last edited by Zpalmtree (2016-03-29 14:40:16)