You are not logged in.
- Topics: Active | Unanswered
Pages: 1
#1 2014-09-07 16:56:55
- Dragnmn
- Member
- Registered: 2014-09-07
- Posts: 5
[SOLVED] Non-blinking cursor on starting X
I followed the beginner's guide to install Archlinux on my laptop (Acer 5750G), and I installed xorg-server and the Nouveau drivers for the 550M card. When trying to start the X-server with the config file obtained from "X -configure" I end up with a single non-blinking cursor on my screen. The output from X -configure ends with the line
(EE) Server terminated with error (2). Closing log file.conf.d"with Xorg.0.log
[ 33.536]
X.Org X Server 1.16.0
Release Date: 2014-07-16
[ 33.536] X Protocol Version 11, Revision 0
[ 33.536] Build Operating System: Linux 3.15.5-2-ARCH x86_64
[ 33.536] Current Operating System: Linux laptop-tim 3.16.1-1-ARCH #1 SMP PREEMPT Thu Aug 14 07:40:19 CEST 2014 x86_64
[ 33.536] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=d05a271d-1c99-486d-aa28-5fd35735922e rw quiet
[ 33.536] Build Date: 31 July 2014 11:53:19AM
[ 33.536]
[ 33.536] Current version of pixman: 0.32.6
[ 33.537] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 33.537] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 33.537] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Sep 7 18:47:40 2014
[ 33.538] (II) Loader magic: 0x818d80
[ 33.538] (II) Module ABI versions:
[ 33.538] X.Org ANSI C Emulation: 0.4
[ 33.538] X.Org Video Driver: 18.0
[ 33.538] X.Org XInput driver : 21.0
[ 33.538] X.Org Server Extension : 8.0
[ 33.542] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c1
[ 33.543] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 33.544] (II) systemd-logind: got fd for /dev/dri/card1 226:1 fd 10 paused 0
[ 33.545] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 33.546] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 11 paused 0
[ 33.549] (--) PCI:*(0:0:2:0) 8086:0116:1025:0504 rev 9, Mem @ 0xd1400000/4194304, 0xc0000000/268435456, I/O @ 0x00003000/64
[ 33.549] (--) PCI: (0:1:0:0) 10de:0df4:1025:0505 rev 161, Mem @ 0xd0000000/16777216, 0xa0000000/268435456, 0xb0000000/33554432, I/O @ 0x00002000/128, BIOS @ 0x????????/524288
[ 33.583] List of video drivers:
[ 33.583] nouveau
[ 33.583] (II) LoadModule: "nouveau"
[ 33.614] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[ 33.647] (II) Module nouveau: vendor="X.Org Foundation"
[ 33.647] compiled for 1.16.0, module version = 1.0.10
[ 33.647] Module class: X.Org Video Driver
[ 33.647] ABI class: X.Org Video Driver, version 18.0
[ 33.647] (II) NOUVEAU driver
[ 33.647] (II) NOUVEAU driver for NVIDIA chipset families :
[ 33.647] RIVA TNT (NV04)
[ 33.647] RIVA TNT2 (NV05)
[ 33.647] GeForce 256 (NV10)
[ 33.647] GeForce 2 (NV11, NV15)
[ 33.647] GeForce 4MX (NV17, NV18)
[ 33.647] GeForce 3 (NV20)
[ 33.647] GeForce 4Ti (NV25, NV28)
[ 33.647] GeForce FX (NV3x)
[ 33.647] GeForce 6 (NV4x)
[ 33.647] GeForce 7 (G7x)
[ 33.647] GeForce 8 (G8x)
[ 33.647] GeForce GTX 200 (NVA0)
[ 33.647] GeForce GTX 400 (NVC0)
[ 33.738] (++) Using config file: "/root/xorg.conf.new"
[ 33.738] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 33.755] (==) ServerLayout "X.org Configured"
[ 33.755] (**) |-->Screen "Screen0" (0)
[ 33.755] (**) | |-->Monitor "Monitor0"
[ 33.755] (**) | |-->Device "Card0"
[ 33.755] (**) |-->Input Device "Mouse0"
[ 33.755] (**) |-->Input Device "Keyboard0"
[ 33.755] (==) Automatically adding devices
[ 33.755] (==) Automatically enabling devices
[ 33.755] (==) Automatically adding GPU devices
[ 33.801] (WW) The directory "/usr/share/fonts/TTF/" does not exist.
[ 33.801] Entry deleted from font path.
[ 33.801] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 33.801] Entry deleted from font path.
[ 33.801] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 33.801] Entry deleted from font path.
[ 33.809] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 33.809] Entry deleted from font path.
[ 33.809] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 33.810] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 33.810] Entry deleted from font path.
[ 33.810] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 33.810] (WW) The directory "/usr/share/fonts/TTF/" does not exist.
[ 33.810] Entry deleted from font path.
[ 33.810] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 33.810] Entry deleted from font path.
[ 33.810] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 33.810] Entry deleted from font path.
[ 33.810] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 33.810] Entry deleted from font path.
[ 33.810] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 33.810] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 33.810] Entry deleted from font path.
[ 33.810] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 33.810] (**) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/misc/
[ 33.810] (**) ModulePath set to "/usr/lib/xorg/modules"
[ 33.810] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 33.810] (WW) Disabling Mouse0
[ 33.810] (WW) Disabling Keyboard0
[ 33.810] (II) systemd-logind: releasing fd for 226:1
[ 33.812] (II) [drm] nouveau interface version: 1.1.1
[ 33.818]
[ 33.819]
Xorg detected your mouse at device /dev/input/mice.
Please check your config if the mouse is still not
operational, as by default Xorg tries to autodetect
the protocol.
[ 33.819]
Your xorg.conf file is /root/xorg.conf.new
[ 33.819] To test the server, run 'X -config /root/xorg.conf.new'If I use the generated config file to start the X-server (X -config path), I end up with a single non-blinking cursor on the screen. If I hold the power button and reboot that way I get the Xorg.0.log pasted below. Waiting does not help. I also tried using nVidia drivers, in which case at least the last four lines of the below log are missing. I do not have a full log saved of that.
[ 130.819]
X.Org X Server 1.16.0
Release Date: 2014-07-16
[ 130.827] X Protocol Version 11, Revision 0
[ 130.829] Build Operating System: Linux 3.15.5-2-ARCH x86_64
[ 130.832] Current Operating System: Linux laptop-tim 3.16.1-1-ARCH #1 SMP PREEMPT Thu Aug 14 07:40:19 CEST 2014 x86_64
[ 130.832] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=d05a271d-1c99-486d-aa28-5fd35735922e rw quiet
[ 130.836] Build Date: 31 July 2014 11:53:19AM
[ 130.838]
[ 130.840] Current version of pixman: 0.32.6
[ 130.845] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 130.845] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 130.853] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Sep 7 18:49:17 2014
[ 130.855] (++) Using config file: "/root/xorg.conf.new"
[ 130.857] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 130.857] (==) ServerLayout "X.org Configured"
[ 130.857] (**) |-->Screen "Screen0" (0)
[ 130.857] (**) | |-->Monitor "Monitor0"
[ 130.857] (**) | |-->Device "Card0"
[ 130.857] (**) |-->Input Device "Mouse0"
[ 130.857] (**) |-->Input Device "Keyboard0"
[ 130.857] (==) Automatically adding devices
[ 130.857] (==) Automatically enabling devices
[ 130.857] (==) Automatically adding GPU devices
[ 130.857] (WW) The directory "/usr/share/fonts/TTF/" does not exist.
[ 130.857] Entry deleted from font path.
[ 130.857] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 130.857] Entry deleted from font path.
[ 130.857] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 130.857] Entry deleted from font path.
[ 130.857] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 130.857] Entry deleted from font path.
[ 130.857] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 130.857] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 130.857] Entry deleted from font path.
[ 130.858] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 130.858] (WW) The directory "/usr/share/fonts/TTF/" does not exist.
[ 130.858] Entry deleted from font path.
[ 130.858] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 130.858] Entry deleted from font path.
[ 130.858] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 130.858] Entry deleted from font path.
[ 130.858] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 130.858] Entry deleted from font path.
[ 130.858] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 130.858] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 130.858] Entry deleted from font path.
[ 130.858] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 130.858] (**) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/misc/
[ 130.858] (**) ModulePath set to "/usr/lib/xorg/modules"
[ 130.858] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 130.858] (WW) Disabling Mouse0
[ 130.858] (WW) Disabling Keyboard0
[ 130.858] (II) Loader magic: 0x818d80
[ 130.858] (II) Module ABI versions:
[ 130.858] X.Org ANSI C Emulation: 0.4
[ 130.858] X.Org Video Driver: 18.0
[ 130.858] X.Org XInput driver : 21.0
[ 130.858] X.Org Server Extension : 8.0
[ 130.862] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c1
[ 130.862] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 130.863] (II) systemd-logind: got fd for /dev/dri/card1 226:1 fd 10 paused 0
[ 130.863] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 130.864] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 11 paused 0
[ 130.867] (--) PCI:*(0:0:2:0) 8086:0116:1025:0504 rev 9, Mem @ 0xd1400000/4194304, 0xc0000000/268435456, I/O @ 0x00003000/64
[ 130.867] (--) PCI: (0:1:0:0) 10de:0df4:1025:0505 rev 161, Mem @ 0xd0000000/16777216, 0xa0000000/268435456, 0xb0000000/33554432, I/O @ 0x00002000/128, BIOS @ 0x????????/524288
[ 130.867] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 130.867] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
[ 130.867] (II) LoadModule: "glx"
[ 130.867] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 131.121] (II) Module glx: vendor="X.Org Foundation"
[ 131.121] compiled for 1.16.0, module version = 1.0.0
[ 131.121] ABI class: X.Org Server Extension, version 8.0
[ 131.121] (==) AIGLX enabled
[ 131.121] (II) LoadModule: "nouveau"
[ 131.122] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[ 131.122] (II) Module nouveau: vendor="X.Org Foundation"
[ 131.122] compiled for 1.16.0, module version = 1.0.10
[ 131.122] Module class: X.Org Video Driver
[ 131.122] ABI class: X.Org Video Driver, version 18.0
[ 131.122] (II) NOUVEAU driver
[ 131.122] (II) NOUVEAU driver for NVIDIA chipset families :
[ 131.122] RIVA TNT (NV04)
[ 131.122] RIVA TNT2 (NV05)
[ 131.122] GeForce 256 (NV10)
[ 131.122] GeForce 2 (NV11, NV15)
[ 131.122] GeForce 4MX (NV17, NV18)
[ 131.122] GeForce 3 (NV20)
[ 131.122] GeForce 4Ti (NV25, NV28)
[ 131.123] GeForce FX (NV3x)
[ 131.123] GeForce 6 (NV4x)
[ 131.123] GeForce 7 (G7x)
[ 131.123] GeForce 8 (G8x)
[ 131.123] GeForce GTX 200 (NVA0)
[ 131.123] GeForce GTX 400 (NVC0)
[ 131.123] (--) using VT number 2
[ 131.132] (II) systemd-logind: releasing fd for 226:1
[ 131.135] (II) [drm] nouveau interface version: 1.1.1
[ 131.135] (II) Loading sub module "dri2"
[ 131.135] (II) LoadModule: "dri2"
[ 131.135] (II) Module "dri2" already built-in
[ 131.136] (--) NOUVEAU(0): Chipset: "NVIDIA NVC1"
[ 131.136] (==) NOUVEAU(0): Depth 24, (--) framebuffer bpp 32
[ 131.136] (==) NOUVEAU(0): RGB weight 888
[ 131.136] (==) NOUVEAU(0): Default visual is TrueColor
[ 131.136] (==) NOUVEAU(0): Using HW cursor
[ 131.136] (==) NOUVEAU(0): GLX sync to VBlank disabled.
[ 131.136] (==) NOUVEAU(0): Page flipping enabled
[ 131.136] (==) NOUVEAU(0): Swap limit set to 2 [Max allowed 2]
[ 131.148] (II) NOUVEAU(0): Output LVDS-2 using monitor section Monitor0
[ 131.159] (II) NOUVEAU(0): Output VGA-2 has no monitor section
[ 131.161] (II) NOUVEAU(0): Output HDMI-2 has no monitor section
[ 131.164] (II) NOUVEAU(0): EDID for output LVDS-2
[ 131.175] (II) NOUVEAU(0): EDID for output VGA-2
[ 131.175] (II) NOUVEAU(0): Printing probed modes for output VGA-2
[ 131.175] (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 131.175] (II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 131.175] (II) NOUVEAU(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 131.175] (II) NOUVEAU(0): Modeline "848x480"x60.0 33.75 848 864 976 1088 480 486 494 517 +hsync +vsync (31.0 kHz e)
[ 131.175] (II) NOUVEAU(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 489 492 525 -hsync -vsync (31.5 kHz e)
[ 131.177] (II) NOUVEAU(0): EDID for output HDMI-2
[ 131.177] (II) NOUVEAU(0): Output LVDS-2 disconnected
[ 131.177] (II) NOUVEAU(0): Output VGA-2 connected
[ 131.177] (II) NOUVEAU(0): Output HDMI-2 disconnected
[ 131.177] (II) NOUVEAU(0): Using exact sizes for initial modes
[ 131.177] (II) NOUVEAU(0): Output VGA-2 using initial mode 1024x768
[ 131.177] (II) NOUVEAU(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 131.177] (--) NOUVEAU(0): Virtual size is 1024x768 (pitch 0)
[ 131.177] (**) NOUVEAU(0): Driver mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
[ 131.177] (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 131.177] (**) NOUVEAU(0): Driver mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.3 Hz
[ 131.177] (II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 131.177] (**) NOUVEAU(0): Driver mode "800x600": 36.0 MHz (scaled from 0.0 MHz), 35.2 kHz, 56.2 Hz
[ 131.177] (II) NOUVEAU(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 131.177] (**) NOUVEAU(0): Driver mode "848x480": 33.8 MHz (scaled from 0.0 MHz), 31.0 kHz, 60.0 Hz
[ 131.177] (II) NOUVEAU(0): Modeline "848x480"x60.0 33.75 848 864 976 1088 480 486 494 517 +hsync +vsync (31.0 kHz e)
[ 131.177] (**) NOUVEAU(0): Driver mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 59.9 Hz
[ 131.177] (II) NOUVEAU(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 489 492 525 -hsync -vsync (31.5 kHz e)
[ 131.177] (==) NOUVEAU(0): DPI set to (96, 96)
[ 131.177] (II) Loading sub module "fb"
[ 131.177] (II) LoadModule: "fb"
[ 131.178] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 131.282] (II) Module fb: vendor="X.Org Foundation"
[ 131.282] compiled for 1.16.0, module version = 1.0.0
[ 131.282] ABI class: X.Org ANSI C Emulation, version 0.4
[ 131.282] (II) Loading sub module "exa"
[ 131.282] (II) LoadModule: "exa"
[ 131.282] (II) Loading /usr/lib/xorg/modules/libexa.so
[ 131.296] (II) Module exa: vendor="X.Org Foundation"
[ 131.296] compiled for 1.16.0, module version = 2.6.0
[ 131.296] ABI class: X.Org Video Driver, version 18.0
[ 131.296] (II) Loading sub module "shadowfb"
[ 131.296] (II) LoadModule: "shadowfb"
[ 131.302] (II) Loading /usr/lib/xorg/modules/libshadowfb.so
[ 131.314] (II) Module shadowfb: vendor="X.Org Foundation"
[ 131.314] compiled for 1.16.0, module version = 1.0.0
[ 131.314] ABI class: X.Org ANSI C Emulation, version 0.4
[ 131.314] (--) Depth 24 pixmap format is 32 bpp
[ 131.318] (II) NOUVEAU(0): Opened GPU channel 0
[ 131.340] (II) NOUVEAU(0): [DRI2] Setup complete
[ 131.340] (II) NOUVEAU(0): [DRI2] DRI driver: nouveau
[ 131.340] (II) NOUVEAU(0): [DRI2] VDPAU driver: nouveau
[ 131.347] (II) EXA(0): Driver allocated offscreen pixmaps
[ 131.347] (II) EXA(0): Driver registered support for the following operations:
[ 131.347] (II) Solid
[ 131.347] (II) Copy
[ 131.347] (II) Composite (RENDER acceleration)
[ 131.347] (II) UploadToScreen
[ 131.347] (II) DownloadFromScreen
[ 131.347] (==) NOUVEAU(0): Backing store enabled
[ 131.347] (==) NOUVEAU(0): Silken mouse enabled
[ 131.356] (II) NOUVEAU(0): [XvMC] Associated with Nouveau GeForce 8/9 Textured Video.
[ 131.357] (II) NOUVEAU(0): [XvMC] Extension initialized.
[ 131.357] (==) NOUVEAU(0): DPMS enabled
[ 131.357] (II) NOUVEAU(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 131.358] (--) RandR disabled
[ 132.088] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 132.088] (II) AIGLX: enabled GLX_ARB_create_context
[ 132.088] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 132.088] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 132.088] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 132.088] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 132.088] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[ 132.088] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[ 132.088] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 132.089] (II) AIGLX: Loaded and initialized nouveau
[ 132.089] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 132.092] (II) NOUVEAU(0): NVEnterVT is called.
[ 138.092] (II) NOUVEAU(0): Setting screen physical size to 270 x 203
[ 138.092] resize called 1024 768
[ 138.466] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[ 138.466] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 138.466] (II) LoadModule: "evdev"
[ 138.466] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 138.493] (II) Module evdev: vendor="X.Org Foundation"
[ 138.493] compiled for 1.16.0, module version = 2.9.0
[ 138.493] Module class: X.Org XInput Driver
[ 138.493] ABI class: X.Org XInput driver, version 21.0
[ 138.494] (II) systemd-logind: got fd for /dev/input/event4 13:68 fd 18 paused 1
[ 138.494] (II) systemd-logind: releasing fd for 13:68
[ 138.530] (II) config/udev: Adding input device Video Bus (/dev/input/event12)
[ 138.530] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 138.532] (II) systemd-logind: got fd for /dev/input/event12 13:76 fd 18 paused 1
[ 138.532] (II) systemd-logind: releasing fd for 13:76
[ 138.557] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 138.557] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 138.558] (II) systemd-logind: got fd for /dev/input/event1 13:65 fd 18 paused 1
[ 138.558] (II) systemd-logind: releasing fd for 13:65
[ 138.584] (II) config/udev: Adding input device Lid Switch (/dev/input/event2)
[ 138.584] (II) No input driver specified, ignoring this device.
[ 138.584] (II) This device may have been added with another device file.
[ 138.584] (II) config/udev: Adding input device Sleep Button (/dev/input/event3)
[ 138.584] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 138.585] (II) systemd-logind: got fd for /dev/input/event3 13:67 fd 18 paused 1
[ 138.585] (II) systemd-logind: releasing fd for 13:67
[ 138.610] (II) config/udev: Adding input device Video Bus (/dev/input/event13)
[ 138.611] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 138.612] (II) systemd-logind: got fd for /dev/input/event13 13:77 fd 18 paused 1
[ 138.612] (II) systemd-logind: releasing fd for 13:77
[ 138.638] (II) config/udev: Adding input device 1.3M HD WebCam (/dev/input/event14)
[ 138.638] (**) 1.3M HD WebCam: Applying InputClass "evdev keyboard catchall"
[ 138.639] (II) systemd-logind: got fd for /dev/input/event14 13:78 fd 18 paused 1
[ 138.639] (II) systemd-logind: releasing fd for 13:78
[ 138.704] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event8)
[ 138.704] (II) No input driver specified, ignoring this device.
[ 138.704] (II) This device may have been added with another device file.
[ 138.704] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event9)
[ 138.704] (II) No input driver specified, ignoring this device.
[ 138.704] (II) This device may have been added with another device file.
[ 138.705] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event10)
[ 138.705] (II) No input driver specified, ignoring this device.
[ 138.705] (II) This device may have been added with another device file.
[ 138.705] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event11)
[ 138.705] (II) No input driver specified, ignoring this device.
[ 138.705] (II) This device may have been added with another device file.
[ 138.706] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 138.706] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 138.707] (II) systemd-logind: got fd for /dev/input/event0 13:64 fd 18 paused 1
[ 138.707] (II) systemd-logind: releasing fd for 13:64
[ 138.770] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event15)
[ 138.771] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 138.772] (II) systemd-logind: got fd for /dev/input/event15 13:79 fd 18 paused 1
[ 138.772] (II) systemd-logind: releasing fd for 13:79
[ 138.824] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[ 138.824] (II) No input driver specified, ignoring this device.
[ 138.824] (II) This device may have been added with another device file.
[ 138.824] (II) config/udev: Adding input device PC Speaker (/dev/input/event5)
[ 138.824] (II) No input driver specified, ignoring this device.
[ 138.824] (II) This device may have been added with another device file.
[ 138.825] (II) config/udev: Adding input device Acer BMA150 accelerometer (/dev/input/event7)
[ 138.825] (II) No input driver specified, ignoring this device.
[ 138.825] (II) This device may have been added with another device file.
[ 138.825] (II) config/udev: Adding input device Acer BMA150 accelerometer (/dev/input/js0)
[ 138.825] (II) No input driver specified, ignoring this device.
[ 138.825] (II) This device may have been added with another device file.
[ 138.826] (II) config/udev: Adding input device Acer WMI hotkeys (/dev/input/event6)
[ 138.826] (**) Acer WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[ 138.827] (II) systemd-logind: got fd for /dev/input/event6 13:70 fd 18 paused 1
[ 138.827] (II) systemd-logind: releasing fd for 13:70Last edited by Dragnmn (2014-09-07 21:31:04)
Offline
#2 2014-09-07 17:14:36
- ewaller
- Administrator
- From: Pasadena, CA
- Registered: 2009-07-13
- Posts: 19,804
Re: [SOLVED] Non-blinking cursor on starting X
Why are you running X -configure ?
Why are you running (trying to run) X as root?
When you get the blinking cursor, rather than force a power down, what happens if you press ctrl-alt-F2?
Nothing is too wonderful to be true, if it be consistent with the laws of nature -- Michael Faraday
Sometimes it is the people no one can imagine anything of who do the things no one can imagine. -- Alan Turing
---
How to Ask Questions the Smart Way
Offline
#3 2014-09-07 18:03:03
- Dragnmn
- Member
- Registered: 2014-09-07
- Posts: 5
Re: [SOLVED] Non-blinking cursor on starting X
I am running X -configure because a guide on the internet told me to, this is my first install. I run as root because (thinking as a Windows user probably) more permissions means it's easier to make it work. I'll try to find better answers for those. The last question I can luckily answer completely: absolutely nothing. ctrl-alt-F2 doesn't work, ctrl-c doesn't work, ctrl-z doesn't work. I haven't found an input which does work yet. It's completely frozen (been on it for about 15 minutes now, nothing happened), except that the HDD-activity LED blinks about once every second.
Great read in your signature by the way, I will attempt to follow it.
Offline
#4 2014-09-07 18:18:55
- ewaller
- Administrator
- From: Pasadena, CA
- Registered: 2009-07-13
- Posts: 19,804
Re: [SOLVED] Non-blinking cursor on starting X
Dragnmn wrote:
I am running X -configure because a guide on the internet told me to, this is my first install. I run as root because (thinking as a Windows user probably) more permissions means it's easier to make it work.
By the way, I forgot to say -- Welcome to Arch Linux 
In general, you should not need to run X -configure. Also, please, don't log in as root and run X. It really is not a good idea and has serious security implications. Stay with the Arch Beginner's guide, and not "a guide on the Internet". My suggestion is to do the following:
Add your primary user to the 'wheel' group.
Configure sudo to allow the wheel group to elevate themselves to root permissions using their password. https://wiki.archlinux.org/index.php/Sudo
Remove any X configurations you created.
Log in as your primary user.
Run 'startx' and see what happens.
If it does not work, capture the output and post it here.
Nothing is too wonderful to be true, if it be consistent with the laws of nature -- Michael Faraday
Sometimes it is the people no one can imagine anything of who do the things no one can imagine. -- Alan Turing
---
How to Ask Questions the Smart Way
Offline
#5 2014-09-07 19:56:27
- Dragnmn
- Member
- Registered: 2014-09-07
- Posts: 5
Re: [SOLVED] Non-blinking cursor on starting X
Tried, deleted /etc/X11/xorg.conf and ran startx. It still doesn't work, but this time the error message is quite clearly "Fatal server error: no screens found". I found a thread on these forums for a similar issue which said to install the Intel drivers as well (it's one of those Optimus laptops) which did fix that error. Now the screen goes black for a few moments, then the program exits mostly successfully ([ 2935.069] (EE) Server terminated successfully (0). Closing log file.). The error thrown here is "[ 2934.383] Error dropping master: -13(Permission denied)". Full log below. I'll figure out how to make it use the nVidia chip at a later date. Is this error something I can "fix" by actually giving it something useful to do, i.e. a display manager to run? I'd rather have a decent idea before I screw this up more.
[ 2933.740]
X.Org X Server 1.16.0
Release Date: 2014-07-16
[ 2933.747] X Protocol Version 11, Revision 0
[ 2933.750] Build Operating System: Linux 3.15.5-2-ARCH x86_64
[ 2933.752] Current Operating System: Linux laptop-tim 3.16.1-1-ARCH #1 SMP PREEMPT Thu Aug 14 07:40:19 CEST 2014 x86_64
[ 2933.752] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=d05a271d-1c99-486d-aa28-5fd35735922e rw quiet
[ 2933.757] Build Date: 31 July 2014 11:53:19AM
[ 2933.759]
[ 2933.762] Current version of pixman: 0.32.6
[ 2933.766] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 2933.766] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 2933.775] (==) Log file: "/home/tim/.local/share/xorg/Xorg.0.log", Time: Sun Sep 7 21:43:31 2014
[ 2933.777] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 2933.777] (==) No Layout section. Using the first Screen section.
[ 2933.777] (==) No screen section available. Using defaults.
[ 2933.777] (**) |-->Screen "Default Screen Section" (0)
[ 2933.777] (**) | |-->Monitor "<default monitor>"
[ 2933.777] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 2933.777] (==) Automatically adding devices
[ 2933.777] (==) Automatically enabling devices
[ 2933.777] (==) Automatically adding GPU devices
[ 2933.777] (WW) The directory "/usr/share/fonts/TTF/" does not exist.
[ 2933.777] Entry deleted from font path.
[ 2933.777] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 2933.777] Entry deleted from font path.
[ 2933.777] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 2933.777] Entry deleted from font path.
[ 2933.777] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 2933.777] Entry deleted from font path.
[ 2933.777] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 2933.777] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 2933.777] Entry deleted from font path.
[ 2933.777] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 2933.777] (==) FontPath set to:
/usr/share/fonts/misc/
[ 2933.777] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 2933.777] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 2933.777] (II) Loader magic: 0x818d80
[ 2933.777] (II) Module ABI versions:
[ 2933.777] X.Org ANSI C Emulation: 0.4
[ 2933.777] X.Org Video Driver: 18.0
[ 2933.777] X.Org XInput driver : 21.0
[ 2933.777] X.Org Server Extension : 8.0
[ 2933.781] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c2
[ 2933.781] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 2933.782] (II) systemd-logind: got fd for /dev/dri/card1 226:1 fd 8 paused 0
[ 2933.782] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 2933.783] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 9 paused 0
[ 2933.786] (--) PCI:*(0:0:2:0) 8086:0116:1025:0504 rev 9, Mem @ 0xd1400000/4194304, 0xc0000000/268435456, I/O @ 0x00003000/64
[ 2933.786] (--) PCI: (0:1:0:0) 10de:0df4:1025:0505 rev 161, Mem @ 0xd0000000/16777216, 0xa0000000/268435456, 0xb0000000/33554432, I/O @ 0x00002000/128, BIOS @ 0x????????/524288
[ 2933.786] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 2933.786] (II) LoadModule: "glx"
[ 2933.786] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 2933.788] (II) Module glx: vendor="X.Org Foundation"
[ 2933.788] compiled for 1.16.0, module version = 1.0.0
[ 2933.788] ABI class: X.Org Server Extension, version 8.0
[ 2933.788] (==) AIGLX enabled
[ 2933.788] (==) Matched intel as autoconfigured driver 0
[ 2933.788] (==) Matched nouveau as autoconfigured driver 1
[ 2933.788] (==) Matched nvidia as autoconfigured driver 2
[ 2933.788] (==) Matched nv as autoconfigured driver 3
[ 2933.788] (==) Matched intel as autoconfigured driver 4
[ 2933.788] (==) Matched modesetting as autoconfigured driver 5
[ 2933.788] (==) Matched fbdev as autoconfigured driver 6
[ 2933.788] (==) Matched vesa as autoconfigured driver 7
[ 2933.788] (==) Assigned the driver to the xf86ConfigLayout
[ 2933.788] (II) LoadModule: "intel"
[ 2933.788] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 2933.788] (II) Module intel: vendor="X.Org Foundation"
[ 2933.788] compiled for 1.16.0, module version = 2.99.914
[ 2933.788] Module class: X.Org Video Driver
[ 2933.788] ABI class: X.Org Video Driver, version 18.0
[ 2933.788] (II) LoadModule: "nouveau"
[ 2933.789] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[ 2933.789] (II) Module nouveau: vendor="X.Org Foundation"
[ 2933.789] compiled for 1.16.0, module version = 1.0.10
[ 2933.789] Module class: X.Org Video Driver
[ 2933.789] ABI class: X.Org Video Driver, version 18.0
[ 2933.789] (II) LoadModule: "nvidia"
[ 2933.789] (WW) Warning, couldn't open module nvidia
[ 2933.789] (II) UnloadModule: "nvidia"
[ 2933.789] (II) Unloading nvidia
[ 2933.789] (EE) Failed to load module "nvidia" (module does not exist, 0)
[ 2933.789] (II) LoadModule: "nv"
[ 2933.789] (WW) Warning, couldn't open module nv
[ 2933.790] (II) UnloadModule: "nv"
[ 2933.790] (II) Unloading nv
[ 2933.790] (EE) Failed to load module "nv" (module does not exist, 0)
[ 2933.790] (II) LoadModule: "modesetting"
[ 2933.790] (WW) Warning, couldn't open module modesetting
[ 2933.790] (II) UnloadModule: "modesetting"
[ 2933.790] (II) Unloading modesetting
[ 2933.790] (EE) Failed to load module "modesetting" (module does not exist, 0)
[ 2933.790] (II) LoadModule: "fbdev"
[ 2933.790] (WW) Warning, couldn't open module fbdev
[ 2933.790] (II) UnloadModule: "fbdev"
[ 2933.790] (II) Unloading fbdev
[ 2933.790] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 2933.790] (II) LoadModule: "vesa"
[ 2933.790] (WW) Warning, couldn't open module vesa
[ 2933.790] (II) UnloadModule: "vesa"
[ 2933.790] (II) Unloading vesa
[ 2933.790] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 2933.790] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[ 2933.791] (II) intel: Driver for Intel(R) HD Graphics: 2000-6000
[ 2933.791] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100, 6100
[ 2933.791] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200, 6200, P6300
[ 2933.791] (II) NOUVEAU driver
[ 2933.791] (II) NOUVEAU driver for NVIDIA chipset families :
[ 2933.791] RIVA TNT (NV04)
[ 2933.791] RIVA TNT2 (NV05)
[ 2933.791] GeForce 256 (NV10)
[ 2933.791] GeForce 2 (NV11, NV15)
[ 2933.791] GeForce 4MX (NV17, NV18)
[ 2933.791] GeForce 3 (NV20)
[ 2933.791] GeForce 4Ti (NV25, NV28)
[ 2933.791] GeForce FX (NV3x)
[ 2933.791] GeForce 6 (NV4x)
[ 2933.791] GeForce 7 (G7x)
[ 2933.791] GeForce 8 (G8x)
[ 2933.791] GeForce GTX 200 (NVA0)
[ 2933.791] GeForce GTX 400 (NVC0)
[ 2933.791] (++) using VT number 1
[ 2933.791] (--) controlling tty is VT number 1, auto-enabling KeepTty
[ 2933.791] xf86EnableIOPorts: failed to set IOPL for I/O (Operation not permitted)
[ 2933.791] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20080730
[ 2933.792] (II) systemd-logind: releasing fd for 226:1
[ 2933.793] (II) [drm] nouveau interface version: 1.1.1
[ 2933.793] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[ 2933.793] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics 3000
[ 2933.793] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx
[ 2933.793] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 2933.793] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 2933.793] (==) intel(0): RGB weight 888
[ 2933.793] (==) intel(0): Default visual is TrueColor
[ 2933.794] (II) intel(0): Output LVDS1 has no monitor section
[ 2933.794] (--) intel(0): Found backlight control interface nv_backlight (type 'raw') for output LVDS1
[ 2933.794] (II) intel(0): Output VGA1 has no monitor section
[ 2933.794] (II) intel(0): Output HDMI1 has no monitor section
[ 2933.794] (II) intel(0): Output DP1 has no monitor section
[ 2933.794] (--) intel(0): Using a maximum size of 256x256 for hardware cursors
[ 2933.794] (II) intel(0): Output VIRTUAL1 has no monitor section
[ 2933.794] (--) intel(0): Output LVDS1 using initial mode 1366x768 on pipe 0
[ 2933.794] (==) intel(0): TearFree disabled
[ 2933.794] (==) intel(0): DPI set to (96, 96)
[ 2933.794] (II) Loading sub module "dri2"
[ 2933.794] (II) LoadModule: "dri2"
[ 2933.794] (II) Module "dri2" already built-in
[ 2933.794] (II) Loading sub module "present"
[ 2933.794] (II) LoadModule: "present"
[ 2933.795] (II) Module "present" already built-in
[ 2933.795] (II) Loading sub module "dri2"
[ 2933.795] (II) LoadModule: "dri2"
[ 2933.795] (II) Module "dri2" already built-in
[ 2933.795] (--) NOUVEAU(G0): Chipset: "NVIDIA NVC1"
[ 2933.795] (==) NOUVEAU(G0): Depth 24, (--) framebuffer bpp 32
[ 2933.795] (==) NOUVEAU(G0): RGB weight 888
[ 2933.795] (==) NOUVEAU(G0): Default visual is TrueColor
[ 2933.795] (==) NOUVEAU(G0): Using HW cursor
[ 2933.795] (==) NOUVEAU(G0): GLX sync to VBlank disabled.
[ 2933.795] (==) NOUVEAU(G0): Page flipping enabled
[ 2933.795] (==) NOUVEAU(G0): Swap limit set to 2 [Max allowed 2]
[ 2933.804] (II) NOUVEAU(G0): Output LVDS-1-2 has no monitor section
[ 2933.814] (II) NOUVEAU(G0): Output VGA-1-2 has no monitor section
[ 2933.816] (II) NOUVEAU(G0): Output HDMI-1-2 has no monitor section
[ 2933.819] (II) NOUVEAU(G0): EDID for output LVDS-1-2
[ 2933.830] (II) NOUVEAU(G0): EDID for output VGA-1-2
[ 2933.830] (II) NOUVEAU(G0): Printing probed modes for output VGA-1-2
[ 2933.830] (II) NOUVEAU(G0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 2933.830] (II) NOUVEAU(G0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 2933.830] (II) NOUVEAU(G0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 2933.830] (II) NOUVEAU(G0): Modeline "848x480"x60.0 33.75 848 864 976 1088 480 486 494 517 +hsync +vsync (31.0 kHz e)
[ 2933.830] (II) NOUVEAU(G0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 489 492 525 -hsync -vsync (31.5 kHz e)
[ 2933.832] (II) NOUVEAU(G0): EDID for output HDMI-1-2
[ 2933.832] (II) NOUVEAU(G0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 2933.832] (--) NOUVEAU(G0): Virtual size is 1024x768 (pitch 0)
[ 2933.832] (**) NOUVEAU(G0): Mode "1366x768": 84.8 MHz (scaled from 0.0 MHz), 47.7 kHz, 59.8 Hz
[ 2933.832] (II) NOUVEAU(G0): Modeline "1366x768"x59.8 84.75 1360 1432 1568 1776 768 771 781 798 -hsync +vsync (47.7 kHz)
[ 2933.832] (==) NOUVEAU(G0): DPI set to (96, 96)
[ 2933.832] (II) Loading sub module "fb"
[ 2933.832] (II) LoadModule: "fb"
[ 2933.832] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 2933.832] (II) Module fb: vendor="X.Org Foundation"
[ 2933.832] compiled for 1.16.0, module version = 1.0.0
[ 2933.833] ABI class: X.Org ANSI C Emulation, version 0.4
[ 2933.833] (II) Loading sub module "exa"
[ 2933.833] (II) LoadModule: "exa"
[ 2933.833] (II) Loading /usr/lib/xorg/modules/libexa.so
[ 2933.833] (II) Module exa: vendor="X.Org Foundation"
[ 2933.833] compiled for 1.16.0, module version = 2.6.0
[ 2933.833] ABI class: X.Org Video Driver, version 18.0
[ 2933.833] (II) Loading sub module "shadowfb"
[ 2933.833] (II) LoadModule: "shadowfb"
[ 2933.833] (II) Loading /usr/lib/xorg/modules/libshadowfb.so
[ 2933.833] (II) Module shadowfb: vendor="X.Org Foundation"
[ 2933.833] compiled for 1.16.0, module version = 1.0.0
[ 2933.833] ABI class: X.Org ANSI C Emulation, version 0.4
[ 2933.833] (==) Depth 24 pixmap format is 32 bpp
[ 2933.835] (II) NOUVEAU(G0): Opened GPU channel 0
[ 2933.840] (II) NOUVEAU(G0): [DRI2] Setup complete
[ 2933.840] (II) NOUVEAU(G0): [DRI2] DRI driver: nouveau
[ 2933.840] (II) NOUVEAU(G0): [DRI2] VDPAU driver: nouveau
[ 2933.840] (II) EXA(256): Driver allocated offscreen pixmaps
[ 2933.840] (II) EXA(256): Driver registered support for the following operations:
[ 2933.840] (II) Solid
[ 2933.840] (II) Copy
[ 2933.840] (II) Composite (RENDER acceleration)
[ 2933.840] (II) UploadToScreen
[ 2933.840] (II) DownloadFromScreen
[ 2933.840] (==) NOUVEAU(G0): Backing store enabled
[ 2933.840] (==) NOUVEAU(G0): Silken mouse enabled
[ 2933.840] (II) NOUVEAU(G0): [XvMC] Associated with Nouveau GeForce 8/9 Textured Video.
[ 2933.840] (II) NOUVEAU(G0): [XvMC] Extension initialized.
[ 2933.841] (==) NOUVEAU(G0): DPMS enabled
[ 2933.841] (II) NOUVEAU(G0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 2933.841] (II) intel(0): SNA initialized with Sandybridge (gen6, gt2) backend
[ 2933.841] (==) intel(0): Backing store enabled
[ 2933.841] (==) intel(0): Silken mouse enabled
[ 2933.841] (II) intel(0): HW Cursor enabled
[ 2933.841] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 2933.841] (==) intel(0): DPMS enabled
[ 2933.841] (II) intel(0): [DRI2] Setup complete
[ 2933.841] (II) intel(0): [DRI2] DRI driver: i965
[ 2933.841] (II) intel(0): [DRI2] VDPAU driver: i965
[ 2933.841] (II) intel(0): direct rendering: DRI2 enabled
[ 2933.841] (II) intel(0): hardware support for Present enabled
[ 2933.842] (==) intel(0): display hotplug detection enabled
[ 2933.842] (--) RandR disabled
[ 2933.858] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 2933.858] (II) AIGLX: enabled GLX_ARB_create_context
[ 2933.858] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 2933.858] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 2933.858] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 2933.858] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 2933.858] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[ 2933.858] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[ 2933.858] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 2933.858] (II) AIGLX: enabled GLX_ARB_create_context_robustness
[ 2933.858] (II) AIGLX: Loaded and initialized i965
[ 2933.858] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 2933.860] (II) NOUVEAU(G0): NVEnterVT is called.
[ 2933.860] Unable to get master: Permission denied
[ 2933.862] (II) intel(0): switch to mode 1366x768@60.0 on LVDS1 using pipe 0, position (0, 0), rotation normal, reflection none
[ 2933.883] (II) intel(0): Setting screen physical size to 361 x 203
[ 2933.943] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[ 2933.943] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 2933.943] (II) LoadModule: "evdev"
[ 2933.943] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 2933.944] (II) Module evdev: vendor="X.Org Foundation"
[ 2933.944] compiled for 1.16.0, module version = 2.9.0
[ 2933.944] Module class: X.Org XInput Driver
[ 2933.944] ABI class: X.Org XInput driver, version 21.0
[ 2933.945] (II) systemd-logind: got fd for /dev/input/event4 13:68 fd 15 paused 0
[ 2933.945] (II) Using input driver 'evdev' for 'Power Button'
[ 2933.945] (**) Power Button: always reports core events
[ 2933.945] (**) evdev: Power Button: Device: "/dev/input/event4"
[ 2933.945] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 2933.945] (--) evdev: Power Button: Found keys
[ 2933.945] (II) evdev: Power Button: Configuring as keyboard
[ 2933.945] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5/event4"
[ 2933.945] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 2933.945] (**) Option "xkb_rules" "evdev"
[ 2933.945] (**) Option "xkb_model" "pc104"
[ 2933.945] (**) Option "xkb_layout" "us"
[ 2933.981] (II) config/udev: Adding input device Video Bus (/dev/input/event12)
[ 2933.981] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 2933.982] (II) systemd-logind: got fd for /dev/input/event12 13:76 fd 16 paused 0
[ 2933.982] (II) Using input driver 'evdev' for 'Video Bus'
[ 2933.982] (**) Video Bus: always reports core events
[ 2933.982] (**) evdev: Video Bus: Device: "/dev/input/event12"
[ 2933.982] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 2933.982] (--) evdev: Video Bus: Found keys
[ 2933.982] (II) evdev: Video Bus: Configuring as keyboard
[ 2933.982] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input14/event12"
[ 2933.982] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 2933.982] (**) Option "xkb_rules" "evdev"
[ 2933.982] (**) Option "xkb_model" "pc104"
[ 2933.982] (**) Option "xkb_layout" "us"
[ 2933.983] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 2933.983] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 2933.984] (II) systemd-logind: got fd for /dev/input/event1 13:65 fd 17 paused 0
[ 2933.984] (II) Using input driver 'evdev' for 'Power Button'
[ 2933.984] (**) Power Button: always reports core events
[ 2933.984] (**) evdev: Power Button: Device: "/dev/input/event1"
[ 2933.984] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 2933.984] (--) evdev: Power Button: Found keys
[ 2933.984] (II) evdev: Power Button: Configuring as keyboard
[ 2933.984] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0C:00/input/input2/event1"
[ 2933.984] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 2933.984] (**) Option "xkb_rules" "evdev"
[ 2933.984] (**) Option "xkb_model" "pc104"
[ 2933.984] (**) Option "xkb_layout" "us"
[ 2933.985] (II) config/udev: Adding input device Lid Switch (/dev/input/event2)
[ 2933.985] (II) No input driver specified, ignoring this device.
[ 2933.985] (II) This device may have been added with another device file.
[ 2933.985] (II) config/udev: Adding input device Sleep Button (/dev/input/event3)
[ 2933.985] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 2933.986] (II) systemd-logind: got fd for /dev/input/event3 13:67 fd 18 paused 0
[ 2933.986] (II) Using input driver 'evdev' for 'Sleep Button'
[ 2933.986] (**) Sleep Button: always reports core events
[ 2933.986] (**) evdev: Sleep Button: Device: "/dev/input/event3"
[ 2933.986] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 2933.986] (--) evdev: Sleep Button: Found keys
[ 2933.986] (II) evdev: Sleep Button: Configuring as keyboard
[ 2933.986] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0E:00/input/input4/event3"
[ 2933.986] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[ 2933.986] (**) Option "xkb_rules" "evdev"
[ 2933.986] (**) Option "xkb_model" "pc104"
[ 2933.986] (**) Option "xkb_layout" "us"
[ 2933.987] (II) config/udev: Adding input device Video Bus (/dev/input/event13)
[ 2933.987] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 2933.988] (II) systemd-logind: got fd for /dev/input/event13 13:77 fd 19 paused 0
[ 2933.988] (II) Using input driver 'evdev' for 'Video Bus'
[ 2933.988] (**) Video Bus: always reports core events
[ 2933.988] (**) evdev: Video Bus: Device: "/dev/input/event13"
[ 2933.988] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 2933.988] (--) evdev: Video Bus: Found keys
[ 2933.988] (II) evdev: Video Bus: Configuring as keyboard
[ 2933.988] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:34/LNXVIDEO:01/input/input15/event13"
[ 2933.988] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 10)
[ 2933.988] (**) Option "xkb_rules" "evdev"
[ 2933.988] (**) Option "xkb_model" "pc104"
[ 2933.988] (**) Option "xkb_layout" "us"
[ 2933.990] (II) config/udev: Adding input device 1.3M HD WebCam (/dev/input/event14)
[ 2933.990] (**) 1.3M HD WebCam: Applying InputClass "evdev keyboard catchall"
[ 2933.991] (II) systemd-logind: got fd for /dev/input/event14 13:78 fd 20 paused 0
[ 2933.991] (II) Using input driver 'evdev' for '1.3M HD WebCam'
[ 2933.991] (**) 1.3M HD WebCam: always reports core events
[ 2933.991] (**) evdev: 1.3M HD WebCam: Device: "/dev/input/event14"
[ 2933.991] (--) evdev: 1.3M HD WebCam: Vendor 0x64e Product 0xd20c
[ 2933.991] (--) evdev: 1.3M HD WebCam: Found keys
[ 2933.991] (II) evdev: 1.3M HD WebCam: Configuring as keyboard
[ 2933.991] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.3/3-1.3:1.0/input/input16/event14"
[ 2933.991] (II) XINPUT: Adding extended input device "1.3M HD WebCam" (type: KEYBOARD, id 11)
[ 2933.991] (**) Option "xkb_rules" "evdev"
[ 2933.991] (**) Option "xkb_model" "pc104"
[ 2933.991] (**) Option "xkb_layout" "us"
[ 2933.992] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event6)
[ 2933.992] (II) No input driver specified, ignoring this device.
[ 2933.992] (II) This device may have been added with another device file.
[ 2933.992] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event9)
[ 2933.992] (II) No input driver specified, ignoring this device.
[ 2933.992] (II) This device may have been added with another device file.
[ 2933.992] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event7)
[ 2933.992] (II) No input driver specified, ignoring this device.
[ 2933.992] (II) This device may have been added with another device file.
[ 2933.993] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event8)
[ 2933.993] (II) No input driver specified, ignoring this device.
[ 2933.993] (II) This device may have been added with another device file.
[ 2933.993] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 2933.993] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 2933.994] (II) systemd-logind: got fd for /dev/input/event0 13:64 fd 21 paused 0
[ 2933.994] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 2933.994] (**) AT Translated Set 2 keyboard: always reports core events
[ 2933.994] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 2933.994] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 2933.994] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 2933.994] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 2933.994] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 2933.994] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 12)
[ 2933.994] (**) Option "xkb_rules" "evdev"
[ 2933.994] (**) Option "xkb_model" "pc104"
[ 2933.994] (**) Option "xkb_layout" "us"
[ 2933.995] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event15)
[ 2933.995] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 2933.996] (II) systemd-logind: got fd for /dev/input/event15 13:79 fd 22 paused 0
[ 2933.996] (II) Using input driver 'evdev' for 'SynPS/2 Synaptics TouchPad'
[ 2933.996] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 2933.996] (**) evdev: SynPS/2 Synaptics TouchPad: Device: "/dev/input/event15"
[ 2933.996] (--) evdev: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[ 2933.996] (--) evdev: SynPS/2 Synaptics TouchPad: Found 3 mouse buttons
[ 2933.996] (--) evdev: SynPS/2 Synaptics TouchPad: Found absolute axes
[ 2933.996] (--) evdev: SynPS/2 Synaptics TouchPad: Found absolute multitouch axes
[ 2933.996] (--) evdev: SynPS/2 Synaptics TouchPad: Found x and y absolute axes
[ 2933.996] (--) evdev: SynPS/2 Synaptics TouchPad: Found absolute touchpad.
[ 2933.996] (II) evdev: SynPS/2 Synaptics TouchPad: Configuring as touchpad
[ 2933.996] (**) evdev: SynPS/2 Synaptics TouchPad: YAxisMapping: buttons 4 and 5
[ 2933.996] (**) evdev: SynPS/2 Synaptics TouchPad: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 2933.996] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input11/event15"
[ 2933.996] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 13)
[ 2933.996] (II) evdev: SynPS/2 Synaptics TouchPad: initialized for absolute axes.
[ 2933.996] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 2933.996] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 0
[ 2933.996] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 2933.996] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 2933.997] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[ 2933.997] (II) No input driver specified, ignoring this device.
[ 2933.997] (II) This device may have been added with another device file.
[ 2933.997] (II) config/udev: Adding input device PC Speaker (/dev/input/event5)
[ 2933.997] (II) No input driver specified, ignoring this device.
[ 2933.997] (II) This device may have been added with another device file.
[ 2933.998] (II) config/udev: Adding input device Acer WMI hotkeys (/dev/input/event10)
[ 2933.998] (**) Acer WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[ 2933.999] (II) systemd-logind: got fd for /dev/input/event10 13:74 fd 23 paused 0
[ 2933.999] (II) Using input driver 'evdev' for 'Acer WMI hotkeys'
[ 2933.999] (**) Acer WMI hotkeys: always reports core events
[ 2933.999] (**) evdev: Acer WMI hotkeys: Device: "/dev/input/event10"
[ 2933.999] (--) evdev: Acer WMI hotkeys: Vendor 0 Product 0
[ 2933.999] (--) evdev: Acer WMI hotkeys: Found keys
[ 2933.999] (II) evdev: Acer WMI hotkeys: Configuring as keyboard
[ 2933.999] (**) Option "config_info" "udev:/sys/devices/virtual/input/input12/event10"
[ 2933.999] (II) XINPUT: Adding extended input device "Acer WMI hotkeys" (type: KEYBOARD, id 14)
[ 2933.999] (**) Option "xkb_rules" "evdev"
[ 2933.999] (**) Option "xkb_model" "pc104"
[ 2933.999] (**) Option "xkb_layout" "us"
[ 2934.000] (II) config/udev: Adding input device Acer BMA150 accelerometer (/dev/input/event11)
[ 2934.000] (II) No input driver specified, ignoring this device.
[ 2934.000] (II) This device may have been added with another device file.
[ 2934.000] (II) config/udev: Adding input device Acer BMA150 accelerometer (/dev/input/js0)
[ 2934.000] (II) No input driver specified, ignoring this device.
[ 2934.000] (II) This device may have been added with another device file.
[ 2934.018] (II) evdev: Acer WMI hotkeys: Close
[ 2934.018] (II) UnloadModule: "evdev"
[ 2934.018] (II) systemd-logind: releasing fd for 13:74
[ 2934.076] (II) evdev: SynPS/2 Synaptics TouchPad: Close
[ 2934.076] (II) UnloadModule: "evdev"
[ 2934.076] (II) systemd-logind: releasing fd for 13:79
[ 2934.129] (II) evdev: AT Translated Set 2 keyboard: Close
[ 2934.130] (II) UnloadModule: "evdev"
[ 2934.130] (II) systemd-logind: releasing fd for 13:64
[ 2934.173] (II) evdev: 1.3M HD WebCam: Close
[ 2934.173] (II) UnloadModule: "evdev"
[ 2934.173] (II) systemd-logind: releasing fd for 13:78
[ 2934.236] (II) evdev: Video Bus: Close
[ 2934.236] (II) UnloadModule: "evdev"
[ 2934.236] (II) systemd-logind: releasing fd for 13:77
[ 2934.263] (II) evdev: Sleep Button: Close
[ 2934.263] (II) UnloadModule: "evdev"
[ 2934.263] (II) systemd-logind: releasing fd for 13:67
[ 2934.289] (II) evdev: Power Button: Close
[ 2934.290] (II) UnloadModule: "evdev"
[ 2934.290] (II) systemd-logind: releasing fd for 13:65
[ 2934.316] (II) evdev: Video Bus: Close
[ 2934.316] (II) UnloadModule: "evdev"
[ 2934.316] (II) systemd-logind: releasing fd for 13:76
[ 2934.349] (II) evdev: Power Button: Close
[ 2934.350] (II) UnloadModule: "evdev"
[ 2934.350] (II) systemd-logind: releasing fd for 13:68
[ 2934.383] (II) NOUVEAU(G0): NVLeaveVT is called.
[ 2934.383] Error dropping master: -13(Permission denied)
[ 2934.384] (II) NOUVEAU(G0): Closed GPU channel 0
[ 2934.386] (EE) intel(0): Failed to set backlight nv_backlight for output LVDS1 to brightness level 0, disabling
[ 2935.069] (EE) Server terminated successfully (0). Closing log file.Offline
#6 2014-09-07 20:11:02
- Head_on_a_Stick
- Member
- From: London
- Registered: 2014-02-20
- Posts: 7,744
- Website
Re: [SOLVED] Non-blinking cursor on starting X
Dragnmn wrote:
Is this error something I can "fix" by actually giving it something useful to do, i.e. a display manager to run? I'd rather have a decent idea before I screw this up more.
Yes, you need to either use a Display Manager (and install a DE) or copy /etc/X11/xinit/xinitrc to ~/.xinitrc and add your DE/WM & other autostart programs there...
https://wiki.archlinux.org/index.php/.xinitrc
Offline
#7 2014-09-07 20:35:52
- Dragnmn
- Member
- Registered: 2014-09-07
- Posts: 5
Re: [SOLVED] Non-blinking cursor on starting X
Thanks to you both for the help, KDE just started perfectly. Now my touchpad doesn't work but that's very much off-topic for this thread. Thanks again.
Offline
#8 2014-09-07 20:42:19
- Head_on_a_Stick
- Member
- From: London
- Registered: 2014-02-20
- Posts: 7,744
- Website
Re: [SOLVED] Non-blinking cursor on starting X
@OP: [SOLVED]?
Also: https://wiki.archlinux.org/index.php/Synaptics
Offline
Pages: 1