You are not logged in.

Pages: 1

#1 2014-09-19 05:29:42

beetlejuice7
Member
Registered: 2012-02-28
Posts: 49

Touchpad not recognized on Asus Zenbook UX303LA

Hello,

I recently purchased an Asus Zenbook UX303LA and just installed Arch on it today. So far everything has been working (display, wireless, audio), but I'm having some issues with the trackpad. It doesn't appear to be recognized correctly and is showing up as a PS/2 Logitech Wheel Mouse. I'm not sure how to find out what modules I need, or even what the logical next steps are in debugging. Any help would be appreciated! 

39: PS/2 00.0: 10500 PS/2 Mouse
  [Created at input.249]
  Unique ID: AH6Q.U5GX9Ignjc0
  Hardware Class: mouse
  Model: "PS/2 Logitech Wheel Mouse"
  Vendor: 0x0002 
  Device: 0x0001 "PS/2 Logitech Wheel Mouse"
  Compatible to: int 0x0210 0x0003
  Device File: /dev/input/mice (/dev/input/mouse1)
  Device Files: /dev/input/mice, /dev/input/mouse1, /dev/input/event12, /dev/input/by-path/platform-i8042-serio-4-event-mouse, /dev/input/by-path/platform-i8042-serio-4-mouse
  Device Number: char 13:63 (char 13:33)
  Driver Info #0:
    Buttons: 3
    Wheels: 0
    XFree86 Protocol: explorerps/2
    GPM Protocol: exps2
  Config Status: cfg=new, avail=yes, need=no, active=unknown

Here is lspci and lsusb:

$ lspci     
00:00.0 Host bridge: Intel Corporation Haswell-ULT DRAM Controller (rev 0b)
00:02.0 VGA compatible controller: Intel Corporation Haswell-ULT Integrated Graphics Controller (rev 0b)
00:03.0 Audio device: Intel Corporation Haswell-ULT HD Audio Controller (rev 0b)
00:04.0 Signal processing controller: Intel Corporation Device 0a03 (rev 0b)
00:14.0 USB controller: Intel Corporation 8 Series USB xHCI HC (rev 04)
00:16.0 Communication controller: Intel Corporation 8 Series HECI #0 (rev 04)
00:1b.0 Audio device: Intel Corporation 8 Series HD Audio Controller (rev 04)
00:1c.0 PCI bridge: Intel Corporation 8 Series PCI Express Root Port 1 (rev e4)
00:1c.3 PCI bridge: Intel Corporation 8 Series PCI Express Root Port 4 (rev e4)
00:1f.0 ISA bridge: Intel Corporation 8 Series LPC Controller (rev 04)
00:1f.2 SATA controller: Intel Corporation 8 Series SATA Controller 1 [AHCI mode] (rev 04)
00:1f.3 SMBus: Intel Corporation 8 Series SMBus Controller (rev 04)
00:1f.6 Signal processing controller: Intel Corporation 8 Series Thermal (rev 04)
02:00.0 Network controller: Intel Corporation Wireless 7260 (rev 6b)
 
$ lsusb
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 004: ID 8087:07dc Intel Corp. 
Bus 001 Device 003: ID 03eb:8a31 Atmel Corp. 
Bus 001 Device 002: ID 064e:9700 Suyin Corp. 
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
$ dmesg
[    5.723709] input: PS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio4/input/input17

I'm not sure what else would be of use for debugging, but I'm happy to try anything.

Offline

#2 2014-09-19 05:59:13

beetlejuice7
Member
Registered: 2012-02-28
Posts: 49

Re: Touchpad not recognized on Asus Zenbook UX303LA

I should mention the laptop has a touch-screen. I tried blacklisting the i2c_hid module, but the touchscreen continues to function (?). If I run `xinput --list` I get the following output:

$ xinput --list
⎡ Virtual core pointer                    	id=2	[master pointer  (3)]
⎜   ↳ Virtual core XTEST pointer              	id=4	[slave  pointer  (2)]
⎜   ↳ Atmel Atmel maXTouch Digitizer          	id=12	[slave  pointer  (2)]
⎜   ↳ PS/2 Logitech Wheel Mouse               	id=13	[slave  pointer  (2)]
⎣ Virtual core keyboard                   	id=3	[master keyboard (2)]
    ↳ Virtual core XTEST keyboard             	id=5	[slave  keyboard (3)]
    ↳ Power Button                            	id=6	[slave  keyboard (3)]
    ↳ Video Bus                               	id=7	[slave  keyboard (3)]
    ↳ Sleep Button                            	id=8	[slave  keyboard (3)]
    ↳ Asus WMI hotkeys                        	id=9	[slave  keyboard (3)]
    ↳ AT Translated Set 2 keyboard            	id=10	[slave  keyboard (3)]
    ↳ USB2.0 UVC HD Webcam                    	id=11	[slave  keyboard (3)]

Possibly the touch-screen is interfering with the touchpad?

Offline

#3 2014-09-22 22:05:37

Petipopotam
Member
Registered: 2014-09-22
Posts: 2

Re: Touchpad not recognized on Asus Zenbook UX303LA

beetlejuice7 wrote:

I should mention the laptop has a touch-screen. I tried blacklisting the i2c_hid module, but the touchscreen continues to function (?).
Possibly the touch-screen is interfering with the touchpad?

I've an UX303LA without touch-screen... and the touchpad is detected as a PS/2 Logitech Wheel Mouse too... so I don't think that this issue is related to the touch-screen.

Offline

#4 2014-09-24 03:33:14

beetlejuice7
Member
Registered: 2012-02-28
Posts: 49

Re: Touchpad not recognized on Asus Zenbook UX303LA

I think you're right. It looks like some Ubuntu users are experiencing the same issue and there's some active discussion over there: http://ubuntuforums.org/showthread.php?t=2243162

I haven't tried the bios update since I don't have windows on the machine anymore (herp).

Offline

#5 2014-09-24 07:50:50

Petipopotam
Member
Registered: 2014-09-22
Posts: 2

Re: Touchpad not recognized on Asus Zenbook UX303LA

You don't have to boot on Windows to upgrade bios... Just download the file, unzip it, put it on a USB key and reboot... Go into the Bios Settings > Advanced > etc... And you will find a tools in the Bios to load the file and flash it !

Offline

#6 2014-09-24 10:50:46

claptrap
Member
Registered: 2014-04-19
Posts: 13

Re: Touchpad not recognized on Asus Zenbook UX303LA

Hi,

Some ASUS models implement a touchpad from a new manufacturer called Focaltech. This touchpads get recognized as a PS/2 Mouse. Here you can find more information:

https://bbs.archlinux.org/viewtopic.php?id=181048

I don't know if this is your problem. The main clue is that you have to get this error:

psmouse serio4: Failed to enable mouse on isa0060/serio4

If this is your case, read this:

https://bugzilla.redhat.com/show_bug.cgi?id=1110011

There you have a workaround, a patch and several other info to check if this is really your problem.

Offline

#7 2014-09-24 15:31:46

beetlejuice7
Member
Registered: 2012-02-28
Posts: 49

Re: Touchpad not recognized on Asus Zenbook UX303LA

I updated the BIOS and the touchpad is still being recognized as a PS/2 Logitech Wheel Mouse. I do not see any "Failed to enable mouse" errors in dmesg...the best I can give you is:

input: PS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio4/input/input16

Offline

#8 2014-09-24 16:30:04

beetlejuice7
Member
Registered: 2012-02-28
Posts: 49

Re: Touchpad not recognized on Asus Zenbook UX303LA

Screw it, I'm going to return this thing...

Offline

#9 2014-09-25 02:21:02

beetlejuice7
Member
Registered: 2012-02-28
Posts: 49

Re: Touchpad not recognized on Asus Zenbook UX303LA

Welp, I returned it, good luck fellows.

Offline

#10 2014-12-01 15:38:06

mercnet
Member
Registered: 2012-11-13
Posts: 1

Re: Touchpad not recognized on Asus Zenbook UX303LA

I am planning on buying a similiar laptop, ASUS Zenbook UX303LN-DB71T, and wanted to let everyone know that Linux 3.18 will include support for FocalTech PS/2 touchpads. http://lkml.iu.edu/hypermail/linux/kern … 03983.html

Offline

#11 2015-01-17 15:42:02

nsvir
Member
Registered: 2013-04-13
Posts: 12

Re: Touchpad not recognized on Asus Zenbook UX303LA

I am reopening the topic because the touchpad is recognized in the new 3.18 UNIX kernel update.
Here is some new informations. I have a UX303LN.

> xinput -list
⎡ Virtual core pointer                    	id=2	[master pointer  (3)]
⎜   ↳ Virtual core XTEST pointer              	id=4	[slave  pointer  (2)]
⎜   ↳ PS/2 FocalTech FocalTech Touchpad in mouse emulation mode	id=13	[slave  pointer  (2)]
⎣ Virtual core keyboard                   	id=3	[master keyboard (2)]
    ↳ Virtual core XTEST keyboard             	id=5	[slave  keyboard (3)]
    ↳ Power Button                            	id=6	[slave  keyboard (3)]
    ↳ Video Bus                               	id=7	[slave  keyboard (3)]
    ↳ Video Bus                               	id=8	[slave  keyboard (3)]
    ↳ Sleep Button                            	id=9	[slave  keyboard (3)]
    ↳ USB2.0 UVC HD Webcam                    	id=10	[slave  keyboard (3)]
    ↳ Asus WMI hotkeys                        	id=11	[slave  keyboard (3)]
    ↳ AT Translated Set 2 keyboard            	id=12	[slave  keyboard (3)]
> dmesg | grep input
[    0.641409] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    5.799887] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input5
[    5.800963] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input6
[    5.801033] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input7
[    6.039233] input: PS/2 FocalTech FocalTech Touchpad in mouse emulation mode as /devices/platform/i8042/serio4/input/input11
[    6.063336] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:11/LNXVIDEO:00/input/input12
[    6.066390] input: PC Speaker as /devices/platform/pcspkr/input/input14
[    6.088144] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input13
[    6.234147] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input15
[    6.234202] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input16
[    6.238087] sound hdaudioC1D0:    inputs:
[    6.240768] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card1/hdaudioC1D0/input17
[    6.240899] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input18
[    6.240945] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input19
[    6.876018] input: Asus WMI hotkeys as /devices/platform/asus-nb-wmi/input/input20
[    7.675895] input: USB2.0 UVC HD Webcam as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/input/input21
> xinput -list-props 'PS/2 FocalTech FocalTech Touchpad in mouse emulation mode'
Device 'PS/2 FocalTech FocalTech Touchpad in mouse emulation mode':
	Device Enabled (138):	1
	Coordinate Transformation Matrix (140):	1.000000, 0.000000, 0.000000, 0.000000, 1.000000, 0.000000, 0.000000, 0.000000, 1.000000
	Device Accel Profile (264):	0
	Device Accel Constant Deceleration (265):	1.000000
	Device Accel Adaptive Deceleration (266):	1.000000
	Device Accel Velocity Scaling (267):	10.000000
	Device Product ID (260):	2, 1
	Device Node (261):	"/dev/input/event4"
	Evdev Axis Inversion (268):	0, 0
	Evdev Axes Swap (270):	0
	Axis Labels (271):	"Rel X" (148), "Rel Y" (149)
	Button Labels (272):	"Button Left" (141), "Button Unknown" (263), "Button Right" (143), "Button Wheel Up" (144), "Button Wheel Down" (145), "Button Horiz Wheel Left" (146), "Button Horiz Wheel Right" (147)
	Evdev Scrolling Distance (273):	0, 0, 0
	Evdev Middle Button Emulation (274):	0
	Evdev Middle Button Timeout (275):	50
	Evdev Third Button Emulation (276):	0
	Evdev Third Button Emulation Timeout (277):	1000
	Evdev Third Button Emulation Button (278):	3
	Evdev Third Button Emulation Threshold (279):	20
	Evdev Wheel Emulation (280):	1
	Evdev Wheel Emulation Axes (281):	6, 7, 4, 5
	Evdev Wheel Emulation Inertia (282):	10
	Evdev Wheel Emulation Timeout (283):	200
	Evdev Wheel Emulation Button (284):	2
	Evdev Drag Lock Buttons (285):	0
> cat /etc/X11/xorg.conf.d/10-evdev.conf
Section "InputClass"
       Identifier "evdev pointer catchall"
       MatchIsPointer "on"
       MatchDevicePath "/dev/input/event*"
       Driver 	   "evdev"
       Option      "EmulateWheel"      "true"
       Option      "EmulateWheelButton"    "2"
       Option      "XAxisMapping"      "6 7"
       Option      "YAxisMapping"      "4 5"
EndSection
cat /etc/X11/xorg.conf.d/50-synaptics.conf
Section "InputClass"
    Identifier "touchpad"
    Driver "synaptics"
    MatchIsTouchpad "on"
    Option "TapButton1" "1"
    Option "TapButton2" "2"
    Option "TapButton3" "3"
    Option "VertEdgeScroll" "on"
    Option "VertTwoFingerScroll" "on"
    Option "HorizEdgeScroll" "on"
    Option "HorizTwoFingerScroll" "on"
    Option "CircularScrolling" "on"
    Option "CircScrollTrigger" "2"
    Option "EmulateTwoFingerMinZ" "40"
    Option "EmulateTwoFingerMinW" "8"
    Option "CoastingSpeed" "0"
    Option "FingerLow" "35"
    Option "FingerHigh" "40"
EndSection

The device does not manage the scrolling wheel gesture.
And I don't think that the synaptics driver can't help me.
Do you have any ideas how I can configure this ?

Thanks :)

Offline

#12 2015-01-17 16:26:04

lubiquity
Member
Registered: 2015-01-17
Posts: 2

Re: Touchpad not recognized on Asus Zenbook UX303LA

nsvir wrote:

I am reopening the topic because the touchpad is recognized in the new 3.18 UNIX kernel update.
Here is some new informations. I have a UX303LN.

...

The device does not manage the scrolling wheel gesture.
And I don't think that the synaptics driver can't help me.
Do you have any ideas how I can configure this ?

Thanks smile

Hi nsvir,

The driver exists and works but is not yet included in the kernel mainline branch: see details here ArchLinux ASUS Zenbook UX303

So you can use the Mathias or Dmitry kernel git, or wait the official kernel.

Ludovic

Offline

#13 2015-03-14 13:32:18

Hylleman
Member
Registered: 2014-03-12
Posts: 5

Re: Touchpad not recognized on Asus Zenbook UX303LA

Hi,

By now, the drivers have been merged into mainline linux. I got my zenbook ux303ln yesterday and decided to try it out. I've got some problems with it. The mouse cursor just stays in the middle of the screen and cannot be moved. I can click though. I got the kernel from the mainline AUR repo, version 4.0-rc3. Tested it both under gnome and cinnamon.

Has someone else got it working with the mainline kernel? Does anyone have some suggestions on what I should try next?

dmesg output with 3.18 kernel:

[    1.636871] input: PS/2 FocalTech FocalTech Touchpad in mouse emulation mode as /devices/platform/i8042/serio4/input/input17

With mainline kernel:

[    1.236838] input: FocalTechPS/2 FocalTech FocalTech Touchpad as /devices/platform/i8042/serio4/input/input15

EDIT: Appending xorg output. Seems ok to me though.

[     8.416] 
X.Org X Server 1.17.1
Release Date: 2015-02-10
[     8.416] X Protocol Version 11, Revision 0
[     8.416] Build Operating System: Linux 3.18.6-1-ARCH x86_64 
[     8.416] Current Operating System: Linux shigeru 4.0.0-1-mainline #1 SMP PREEMPT Fri Mar 13 16:53:42 UTC 2015 x86_64
[     8.416] Kernel command line: BOOT_IMAGE=/vmlinuz-linux-mainline root=UUID=d2590669-5d13-4b8c-8e9e-0fdd61ff24db rw quiet
[     8.416] Build Date: 22 February 2015  12:50:32PM
[     8.416]  
[     8.416] Current version of pixman: 0.32.6
[     8.416] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[     8.416] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[     8.416] (==) Log file: "/home/karl/.local/share/xorg/Xorg.0.log", Time: Sat Mar 14 14:46:21 2015
[     8.421] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[     8.421] (==) No Layout section.  Using the first Screen section.
[     8.421] (==) No screen section available. Using defaults.
[     8.421] (**) |-->Screen "Default Screen Section" (0)
[     8.421] (**) |   |-->Monitor "<default monitor>"
[     8.422] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[     8.422] (==) Automatically adding devices
[     8.422] (==) Automatically enabling devices
[     8.422] (==) Automatically adding GPU devices
[     8.426] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/OTF/".
[     8.426] 	Entry deleted from font path.
[     8.426] 	(Run 'mkfontdir' on "/usr/share/fonts/OTF/").
[     8.427] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[     8.427] 	Entry deleted from font path.
[     8.427] 	(Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[     8.428] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[     8.428] 	Entry deleted from font path.
[     8.428] 	(Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[     8.428] (==) FontPath set to:
	/usr/share/fonts/misc/,
	/usr/share/fonts/TTF/,
	/usr/share/fonts/Type1/
[     8.428] (==) ModulePath set to "/usr/lib/xorg/modules"
[     8.428] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[     8.428] (II) Loader magic: 0x815d80
[     8.428] (II) Module ABI versions:
[     8.428] 	X.Org ANSI C Emulation: 0.4
[     8.428] 	X.Org Video Driver: 19.0
[     8.428] 	X.Org XInput driver : 21.0
[     8.428] 	X.Org Server Extension : 9.0
[     8.429] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c1
[     8.430] (II) xfree86: Adding drm device (/dev/dri/card0)
[     8.431] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 8 paused 0
[     8.432] (--) PCI:*(0:0:2:0) 8086:1616:1043:183d rev 9, Mem @ 0xf5000000/16777216, 0xd0000000/268435456, I/O @ 0x0000f000/64
[     8.432] (--) PCI: (0:3:0:0) 10de:1341:1043:12df rev 162, Mem @ 0xf6000000/16777216, 0xe0000000/268435456, 0xf0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[     8.432] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[     8.432] (II) LoadModule: "glx"
[     8.433] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[     8.445] (II) Module glx: vendor="X.Org Foundation"
[     8.445] 	compiled for 1.17.1, module version = 1.0.0
[     8.445] 	ABI class: X.Org Server Extension, version 9.0
[     8.445] (==) AIGLX enabled
[     8.445] (==) Matched intel as autoconfigured driver 0
[     8.445] (==) Matched intel as autoconfigured driver 1
[     8.445] (==) Matched modesetting as autoconfigured driver 2
[     8.445] (==) Matched fbdev as autoconfigured driver 3
[     8.445] (==) Matched vesa as autoconfigured driver 4
[     8.445] (==) Assigned the driver to the xf86ConfigLayout
[     8.445] (II) LoadModule: "intel"
[     8.445] (WW) Warning, couldn't open module intel
[     8.445] (II) UnloadModule: "intel"
[     8.445] (II) Unloading intel
[     8.445] (EE) Failed to load module "intel" (module does not exist, 0)
[     8.445] (II) LoadModule: "modesetting"
[     8.445] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[     8.446] (II) Module modesetting: vendor="X.Org Foundation"
[     8.446] 	compiled for 1.17.1, module version = 1.17.1
[     8.446] 	Module class: X.Org Video Driver
[     8.446] 	ABI class: X.Org Video Driver, version 19.0
[     8.446] (II) LoadModule: "fbdev"
[     8.446] (WW) Warning, couldn't open module fbdev
[     8.446] (II) UnloadModule: "fbdev"
[     8.446] (II) Unloading fbdev
[     8.446] (EE) Failed to load module "fbdev" (module does not exist, 0)
[     8.446] (II) LoadModule: "vesa"
[     8.446] (WW) Warning, couldn't open module vesa
[     8.446] (II) UnloadModule: "vesa"
[     8.446] (II) Unloading vesa
[     8.446] (EE) Failed to load module "vesa" (module does not exist, 0)
[     8.446] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[     8.446] (++) using VT number 1

[     8.446] (--) controlling tty is VT number 1, auto-enabling KeepTty
[     8.447] (II) modeset(0): using drv /dev/dri/card0
[     8.447] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[     8.447] (II) modeset(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[     8.447] (==) modeset(0): Depth 24, (==) framebuffer bpp 32
[     8.447] (==) modeset(0): RGB weight 888
[     8.447] (==) modeset(0): Default visual is TrueColor
[     8.447] (II) Loading sub module "glamoregl"
[     8.447] (II) LoadModule: "glamoregl"
[     8.447] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[     8.455] (II) Module glamoregl: vendor="X.Org Foundation"
[     8.455] 	compiled for 1.17.1, module version = 1.0.0
[     8.455] 	ABI class: X.Org ANSI C Emulation, version 0.4
[     8.455] (II) glamor: OpenGL accelerated X.org driver based.
[     8.490] (II) glamor: EGL version 1.4 (DRI2):
[     8.505] (II) modeset(0): glamor initialized
[     8.505] (II) Loading sub module "dri2"
[     8.505] (II) LoadModule: "dri2"
[     8.505] (II) Module "dri2" already built-in
[     8.505] (II) modeset(0): Output eDP-0 has no monitor section
[     8.505] (II) modeset(0): Output DisplayPort-0 has no monitor section
[     8.505] (II) modeset(0): Output HDMI-0 has no monitor section
[     8.506] (II) modeset(0): Output HDMI-1 has no monitor section
[     8.506] (II) modeset(0): EDID for output eDP-0
[     8.506] (II) modeset(0): Manufacturer: CMN  Model: 1361  Serial#: 0
[     8.506] (II) modeset(0): Year: 2014  Week: 7
[     8.506] (II) modeset(0): EDID Version: 1.4
[     8.506] (II) modeset(0): Digital Display Input
[     8.506] (II) modeset(0): 8 bits per channel
[     8.506] (II) modeset(0): Digital interface is DisplayPort
[     8.506] (II) modeset(0): Max Image Size [cm]: horiz.: 29  vert.: 17
[     8.506] (II) modeset(0): Gamma: 2.20
[     8.506] (II) modeset(0): No DPMS capabilities specified
[     8.506] (II) modeset(0): Supported color encodings: RGB 4:4:4 
[     8.506] (II) modeset(0): First detailed timing is preferred mode
[     8.506] (II) modeset(0): Preferred mode is native pixel format and refresh rate
[     8.506] (II) modeset(0): redX: 0.640 redY: 0.340   greenX: 0.308 greenY: 0.615
[     8.506] (II) modeset(0): blueX: 0.150 blueY: 0.070   whiteX: 0.313 whiteY: 0.329
[     8.506] (II) modeset(0): Manufacturer's mask: 0
[     8.506] (II) modeset(0): Supported detailed timing:
[     8.506] (II) modeset(0): clock: 138.8 MHz   Image Size:  293 x 165 mm
[     8.506] (II) modeset(0): h_active: 1920  h_sync: 1966  h_sync_end 1996 h_blank_end 2080 h_border: 0
[     8.506] (II) modeset(0): v_active: 1080  v_sync: 1082  v_sync_end 1086 v_blanking: 1112 v_border: 0
[     8.506] (II) modeset(0): Supported detailed timing:
[     8.506] (II) modeset(0): clock: 92.5 MHz   Image Size:  293 x 165 mm
[     8.506] (II) modeset(0): h_active: 1920  h_sync: 1966  h_sync_end 1996 h_blank_end 2080 h_border: 0
[     8.506] (II) modeset(0): v_active: 1080  v_sync: 1082  v_sync_end 1086 v_blanking: 1112 v_border: 0
[     8.506] (II) modeset(0):  CMN
[     8.506] (II) modeset(0):  N133HSE-EA3
[     8.506] (II) modeset(0): EDID (in hex):
[     8.506] (II) modeset(0): 	00ffffffffffff000dae611300000000
[     8.506] (II) modeset(0): 	07180104a51d117802ce85a3574e9d26
[     8.506] (II) modeset(0): 	12505400000001010101010101010101
[     8.506] (II) modeset(0): 	010101010101363680a0703820402e1e
[     8.506] (II) modeset(0): 	240025a510000018242480a070382040
[     8.506] (II) modeset(0): 	2e1e240025a510000018000000fe0043
[     8.506] (II) modeset(0): 	4d4e0a202020202020202020000000fe
[     8.506] (II) modeset(0): 	004e3133334853452d4541330a2000a1
[     8.506] (II) modeset(0): Printing probed modes for output eDP-0
[     8.506] (II) modeset(0): Modeline "1920x1080"x60.0  138.78  1920 1966 1996 2080  1080 1082 1086 1112 -hsync -vsync (66.7 kHz eP)
[     8.506] (II) modeset(0): Modeline "1920x1080"x40.0   92.52  1920 1966 1996 2080  1080 1082 1086 1112 -hsync -vsync (44.5 kHz e)
[     8.506] (II) modeset(0): Modeline "1400x1050"x60.0  122.00  1400 1488 1640 1880  1050 1052 1064 1082 +hsync +vsync (64.9 kHz d)
[     8.506] (II) modeset(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz d)
[     8.506] (II) modeset(0): Modeline "1280x960"x60.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz d)
[     8.506] (II) modeset(0): Modeline "1024x768"x120.1  133.47  1024 1100 1212 1400  768 768 770 794 doublescan -hsync +vsync (95.3 kHz d)
[     8.506] (II) modeset(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz d)
[     8.506] (II) modeset(0): Modeline "960x720"x120.0  117.00  960 1024 1128 1300  720 720 722 750 doublescan -hsync +vsync (90.0 kHz d)
[     8.506] (II) modeset(0): Modeline "928x696"x120.1  109.15  928 976 1088 1264  696 696 698 719 doublescan -hsync +vsync (86.4 kHz d)
[     8.506] (II) modeset(0): Modeline "896x672"x120.0  102.40  896 960 1060 1224  672 672 674 697 doublescan -hsync +vsync (83.7 kHz d)
[     8.506] (II) modeset(0): Modeline "800x600"x120.0   81.00  800 832 928 1080  600 600 602 625 doublescan +hsync +vsync (75.0 kHz d)
[     8.506] (II) modeset(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz d)
[     8.506] (II) modeset(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz d)
[     8.506] (II) modeset(0): Modeline "700x525"x120.0   61.00  700 744 820 940  525 526 532 541 doublescan +hsync +vsync (64.9 kHz d)
[     8.506] (II) modeset(0): Modeline "640x512"x120.0   54.00  640 664 720 844  512 512 514 533 doublescan +hsync +vsync (64.0 kHz d)
[     8.506] (II) modeset(0): Modeline "640x480"x120.0   54.00  640 688 744 900  480 480 482 500 doublescan +hsync +vsync (60.0 kHz d)
[     8.506] (II) modeset(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz d)
[     8.506] (II) modeset(0): Modeline "512x384"x120.0   32.50  512 524 592 672  384 385 388 403 doublescan -hsync -vsync (48.4 kHz d)
[     8.506] (II) modeset(0): Modeline "400x300"x120.6   20.00  400 420 484 528  300 300 302 314 doublescan +hsync +vsync (37.9 kHz d)
[     8.506] (II) modeset(0): Modeline "400x300"x112.7   18.00  400 412 448 512  300 300 301 312 doublescan +hsync +vsync (35.2 kHz d)
[     8.506] (II) modeset(0): Modeline "320x240"x120.1   12.59  320 328 376 400  240 245 246 262 doublescan -hsync -vsync (31.5 kHz d)
[     8.506] (II) modeset(0): EDID for output DisplayPort-0
[     8.506] (II) modeset(0): EDID for output HDMI-0
[     8.507] (II) modeset(0): EDID for output HDMI-1
[     8.507] (II) modeset(0): Output eDP-0 connected
[     8.507] (II) modeset(0): Output DisplayPort-0 disconnected
[     8.507] (II) modeset(0): Output HDMI-0 disconnected
[     8.507] (II) modeset(0): Output HDMI-1 disconnected
[     8.507] (II) modeset(0): Using exact sizes for initial modes
[     8.507] (II) modeset(0): Output eDP-0 using initial mode 1920x1080
[     8.507] (II) modeset(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[     8.507] (==) modeset(0): DPI set to (96, 96)
[     8.507] (II) Loading sub module "fb"
[     8.507] (II) LoadModule: "fb"
[     8.507] (II) Loading /usr/lib/xorg/modules/libfb.so
[     8.508] (II) Module fb: vendor="X.Org Foundation"
[     8.508] 	compiled for 1.17.1, module version = 1.0.0
[     8.508] 	ABI class: X.Org ANSI C Emulation, version 0.4
[     8.508] (==) Depth 24 pixmap format is 32 bpp
[     8.564] (==) modeset(0): Backing store enabled
[     8.564] (==) modeset(0): Silken mouse enabled
[     8.564] (II) modeset(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[     8.565] (==) modeset(0): DPMS enabled
[     8.565] (II) modeset(0): [DRI2] Setup complete
[     8.565] (II) modeset(0): [DRI2]   DRI driver: i965
[     8.565] (II) modeset(0): [DRI2]   VDPAU driver: i965
[     8.579] (--) RandR disabled
[     8.598] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[     8.598] (II) AIGLX: enabled GLX_ARB_create_context
[     8.598] (II) AIGLX: enabled GLX_ARB_create_context_profile
[     8.598] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[     8.598] (II) AIGLX: enabled GLX_INTEL_swap_event
[     8.598] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[     8.598] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[     8.598] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[     8.598] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[     8.598] (II) AIGLX: enabled GLX_ARB_create_context_robustness
[     8.598] (II) AIGLX: Loaded and initialized i965
[     8.598] (II) GLX: Initialized DRI2 GL provider for screen 0
[     8.601] (II) modeset(0): Setting screen physical size to 508 x 285
[     8.638] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[     8.638] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[     8.638] (II) LoadModule: "evdev"
[     8.638] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[     8.640] (II) Module evdev: vendor="X.Org Foundation"
[     8.640] 	compiled for 1.16.2, module version = 2.9.1
[     8.640] 	Module class: X.Org XInput Driver
[     8.640] 	ABI class: X.Org XInput driver, version 21.0
[     8.641] (II) systemd-logind: got fd for /dev/input/event3 13:67 fd 12 paused 0
[     8.641] (II) Using input driver 'evdev' for 'Power Button'
[     8.641] (**) Power Button: always reports core events
[     8.641] (**) evdev: Power Button: Device: "/dev/input/event3"
[     8.641] (--) evdev: Power Button: Vendor 0 Product 0x1
[     8.641] (--) evdev: Power Button: Found keys
[     8.641] (II) evdev: Power Button: Configuring as keyboard
[     8.641] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input7/event3"
[     8.641] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[     8.641] (**) Option "xkb_rules" "evdev"
[     8.641] (**) Option "xkb_model" "pc104"
[     8.641] (**) Option "xkb_layout" "us"
[     8.654] (II) config/udev: Adding input device Video Bus (/dev/input/event9)
[     8.654] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[     8.655] (II) systemd-logind: got fd for /dev/input/event9 13:73 fd 13 paused 0
[     8.655] (II) Using input driver 'evdev' for 'Video Bus'
[     8.655] (**) Video Bus: always reports core events
[     8.655] (**) evdev: Video Bus: Device: "/dev/input/event9"
[     8.655] (--) evdev: Video Bus: Vendor 0 Product 0x6
[     8.655] (--) evdev: Video Bus: Found keys
[     8.655] (II) evdev: Video Bus: Configuring as keyboard
[     8.655] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input17/event9"
[     8.655] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[     8.655] (**) Option "xkb_rules" "evdev"
[     8.655] (**) Option "xkb_model" "pc104"
[     8.655] (**) Option "xkb_layout" "us"
[     8.655] (II) config/udev: Adding input device Video Bus (/dev/input/event10)
[     8.655] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[     8.655] (II) systemd-logind: got fd for /dev/input/event10 13:74 fd 14 paused 0
[     8.655] (II) Using input driver 'evdev' for 'Video Bus'
[     8.655] (**) Video Bus: always reports core events
[     8.655] (**) evdev: Video Bus: Device: "/dev/input/event10"
[     8.655] (--) evdev: Video Bus: Vendor 0 Product 0x6
[     8.655] (--) evdev: Video Bus: Found keys
[     8.655] (II) evdev: Video Bus: Configuring as keyboard
[     8.655] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:22/LNXVIDEO:01/input/input18/event10"
[     8.655] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[     8.655] (**) Option "xkb_rules" "evdev"
[     8.655] (**) Option "xkb_model" "pc104"
[     8.655] (**) Option "xkb_layout" "us"
[     8.656] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[     8.656] (II) No input driver specified, ignoring this device.
[     8.656] (II) This device may have been added with another device file.
[     8.656] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[     8.656] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[     8.656] (II) systemd-logind: got fd for /dev/input/event2 13:66 fd 15 paused 0
[     8.656] (II) Using input driver 'evdev' for 'Sleep Button'
[     8.656] (**) Sleep Button: always reports core events
[     8.656] (**) evdev: Sleep Button: Device: "/dev/input/event2"
[     8.656] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[     8.656] (--) evdev: Sleep Button: Found keys
[     8.656] (II) evdev: Sleep Button: Configuring as keyboard
[     8.656] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input6/event2"
[     8.656] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[     8.656] (**) Option "xkb_rules" "evdev"
[     8.656] (**) Option "xkb_model" "pc104"
[     8.656] (**) Option "xkb_layout" "us"
[     8.657] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=3 (/dev/input/event13)
[     8.657] (II) No input driver specified, ignoring this device.
[     8.657] (II) This device may have been added with another device file.
[     8.657] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=7 (/dev/input/event14)
[     8.657] (II) No input driver specified, ignoring this device.
[     8.657] (II) This device may have been added with another device file.
[     8.657] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=8 (/dev/input/event15)
[     8.657] (II) No input driver specified, ignoring this device.
[     8.657] (II) This device may have been added with another device file.
[     8.657] (II) config/udev: Adding input device USB2.0 UVC HD Webcam (/dev/input/event12)
[     8.657] (**) USB2.0 UVC HD Webcam: Applying InputClass "evdev keyboard catchall"
[     8.658] (II) systemd-logind: got fd for /dev/input/event12 13:76 fd 16 paused 0
[     8.658] (II) Using input driver 'evdev' for 'USB2.0 UVC HD Webcam'
[     8.658] (**) USB2.0 UVC HD Webcam: always reports core events
[     8.658] (**) evdev: USB2.0 UVC HD Webcam: Device: "/dev/input/event12"
[     8.658] (--) evdev: USB2.0 UVC HD Webcam: Vendor 0x64e Product 0x9700
[     8.658] (--) evdev: USB2.0 UVC HD Webcam: Found keys
[     8.658] (II) evdev: USB2.0 UVC HD Webcam: Configuring as keyboard
[     8.658] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/input/input19/event12"
[     8.658] (II) XINPUT: Adding extended input device "USB2.0 UVC HD Webcam" (type: KEYBOARD, id 10)
[     8.658] (**) Option "xkb_rules" "evdev"
[     8.658] (**) Option "xkb_model" "pc104"
[     8.658] (**) Option "xkb_layout" "us"
[     8.658] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event4)
[     8.658] (II) No input driver specified, ignoring this device.
[     8.658] (II) This device may have been added with another device file.
[     8.658] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event6)
[     8.658] (II) No input driver specified, ignoring this device.
[     8.658] (II) This device may have been added with another device file.
[     8.658] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event5)
[     8.658] (II) No input driver specified, ignoring this device.
[     8.658] (II) This device may have been added with another device file.
[     8.658] (II) config/udev: Adding input device Asus WMI hotkeys (/dev/input/event8)
[     8.658] (**) Asus WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[     8.659] (II) systemd-logind: got fd for /dev/input/event8 13:72 fd 17 paused 0
[     8.659] (II) Using input driver 'evdev' for 'Asus WMI hotkeys'
[     8.659] (**) Asus WMI hotkeys: always reports core events
[     8.659] (**) evdev: Asus WMI hotkeys: Device: "/dev/input/event8"
[     8.659] (--) evdev: Asus WMI hotkeys: Vendor 0 Product 0
[     8.659] (--) evdev: Asus WMI hotkeys: Found keys
[     8.659] (II) evdev: Asus WMI hotkeys: Configuring as keyboard
[     8.659] (**) Option "config_info" "udev:/sys/devices/platform/asus-nb-wmi/input/input15/event8"
[     8.659] (II) XINPUT: Adding extended input device "Asus WMI hotkeys" (type: KEYBOARD, id 11)
[     8.659] (**) Option "xkb_rules" "evdev"
[     8.659] (**) Option "xkb_model" "pc104"
[     8.659] (**) Option "xkb_layout" "us"
[     8.659] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[     8.659] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[     8.659] (II) systemd-logind: got fd for /dev/input/event0 13:64 fd 18 paused 0
[     8.659] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[     8.659] (**) AT Translated Set 2 keyboard: always reports core events
[     8.659] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[     8.659] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[     8.659] (--) evdev: AT Translated Set 2 keyboard: Found keys
[     8.659] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[     8.659] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[     8.659] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 12)
[     8.659] (**) Option "xkb_rules" "evdev"
[     8.659] (**) Option "xkb_model" "pc104"
[     8.659] (**) Option "xkb_layout" "us"
[     8.660] (II) config/udev: Adding input device FocalTechPS/2 FocalTech FocalTech Touchpad (/dev/input/event11)
[     8.660] (**) FocalTechPS/2 FocalTech FocalTech Touchpad: Applying InputClass "evdev touchpad catchall"
[     8.660] (II) systemd-logind: got fd for /dev/input/event11 13:75 fd 19 paused 0
[     8.660] (II) Using input driver 'evdev' for 'FocalTechPS/2 FocalTech FocalTech Touchpad'
[     8.660] (**) FocalTechPS/2 FocalTech FocalTech Touchpad: always reports core events
[     8.660] (**) evdev: FocalTechPS/2 FocalTech FocalTech Touchpad: Device: "/dev/input/event11"
[     8.660] (--) evdev: FocalTechPS/2 FocalTech FocalTech Touchpad: Vendor 0x2 Product 0x12
[     8.660] (--) evdev: FocalTechPS/2 FocalTech FocalTech Touchpad: Found 1 mouse buttons
[     8.660] (--) evdev: FocalTechPS/2 FocalTech FocalTech Touchpad: Found absolute axes
[     8.660] (--) evdev: FocalTechPS/2 FocalTech FocalTech Touchpad: Found absolute multitouch axes
[     8.660] (--) evdev: FocalTechPS/2 FocalTech FocalTech Touchpad: Found x and y absolute axes
[     8.660] (--) evdev: FocalTechPS/2 FocalTech FocalTech Touchpad: Found absolute touchpad.
[     8.660] (II) evdev: FocalTechPS/2 FocalTech FocalTech Touchpad: Configuring as touchpad
[     8.660] (**) evdev: FocalTechPS/2 FocalTech FocalTech Touchpad: YAxisMapping: buttons 4 and 5
[     8.660] (**) evdev: FocalTechPS/2 FocalTech FocalTech Touchpad: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[     8.660] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio4/input/input16/event11"
[     8.660] (II) XINPUT: Adding extended input device "FocalTechPS/2 FocalTech FocalTech Touchpad" (type: TOUCHPAD, id 13)
[     8.660] (II) evdev: FocalTechPS/2 FocalTech FocalTech Touchpad: initialized for absolute axes.
[     8.660] (**) FocalTechPS/2 FocalTech FocalTech Touchpad: (accel) keeping acceleration scheme 1
[     8.660] (**) FocalTechPS/2 FocalTech FocalTech Touchpad: (accel) acceleration profile 0
[     8.660] (**) FocalTechPS/2 FocalTech FocalTech Touchpad: (accel) acceleration factor: 2.000
[     8.660] (**) FocalTechPS/2 FocalTech FocalTech Touchpad: (accel) acceleration threshold: 4
[     8.661] (II) config/udev: Adding input device FocalTechPS/2 FocalTech FocalTech Touchpad (/dev/input/mouse0)
[     8.661] (II) No input driver specified, ignoring this device.
[     8.661] (II) This device may have been added with another device file.
[     8.661] (II) config/udev: Adding input device PC Speaker (/dev/input/event7)
[     8.661] (II) No input driver specified, ignoring this device.
[     8.661] (II) This device may have been added with another device file.
[     9.195] (II) modeset(0): EDID vendor "CMN", prod id 4961
[     9.195] (II) modeset(0): Printing DDC gathered Modelines:
[     9.195] (II) modeset(0): Modeline "1920x1080"x0.0  138.78  1920 1966 1996 2080  1080 1082 1086 1112 -hsync -vsync (66.7 kHz eP)
[     9.195] (II) modeset(0): Modeline "1920x1080"x0.0   92.52  1920 1966 1996 2080  1080 1082 1086 1112 -hsync -vsync (44.5 kHz e)
[    10.039] (II) modeset(0): EDID vendor "CMN", prod id 4961
[    10.039] (II) modeset(0): Printing DDC gathered Modelines:
[    10.039] (II) modeset(0): Modeline "1920x1080"x0.0  138.78  1920 1966 1996 2080  1080 1082 1086 1112 -hsync -vsync (66.7 kHz eP)
[    10.039] (II) modeset(0): Modeline "1920x1080"x0.0   92.52  1920 1966 1996 2080  1080 1082 1086 1112 -hsync -vsync (44.5 kHz e)

EDIT2:

The error was that I had not installed xf86-input-synaptics. I didn't think this would be needed since it isn't a synaptic touchpad. A bit confusing. Now everything works great, I really recommend trying the mainline kernel if you got a zenbook UX303.

Regards,
Karl

Last edited by Hylleman (2015-03-14 16:39:40)

Offline

Pages: 1

Board footer

Powered by FluxBB